0032451: Tests - adjusting test cases with Improvement status on macOS arm64 platforms

- Load OPENGL draw plugin before using vcaps
- Skip optional VTK plugin on macOS within "oit" test
- Processing improvements

src/Extrema/Extrema_ExtCC.hxx

@@ -143,8 +143,8 @@ protected:
 private:
 
   // disallow copies
-  Extrema_ExtCC            (Extrema_ExtCC& );
-  Extrema_ExtCC& operator= (Extrema_ExtCC& );
+  Extrema_ExtCC            (Extrema_ExtCC& ) Standard_DELETE;
+  Extrema_ExtCC& operator= (Extrema_ExtCC& ) Standard_DELETE;
 
 private:
 

src/Extrema/Extrema_ExtCS.hxx

@@ -87,8 +87,8 @@ private:
 private:
 
   // disallow copies
-  Extrema_ExtCS            (Extrema_ExtCS& );
-  Extrema_ExtCS& operator= (Extrema_ExtCS& );
+  Extrema_ExtCS            (Extrema_ExtCS& ) Standard_DELETE;
+  Extrema_ExtCS& operator= (Extrema_ExtCS& ) Standard_DELETE;
 
 private:
 

src/Extrema/Extrema_GenExtCS.hxx

@@ -108,8 +108,8 @@ private:
 private:
 
   // disallow copies
-  Extrema_GenExtCS            (const Extrema_GenExtCS& );
-  Extrema_GenExtCS& operator= (const Extrema_GenExtCS& );
+  Extrema_GenExtCS            (const Extrema_GenExtCS& ) Standard_DELETE;
+  Extrema_GenExtCS& operator= (const Extrema_GenExtCS& ) Standard_DELETE;
 
 private:
 

src/Extrema/Extrema_GenExtPS.hxx

@@ -110,8 +110,8 @@ private:
 private:
 
   // disallow copies
-  Extrema_GenExtPS            (const Extrema_GenExtPS& );
-  Extrema_GenExtPS& operator= (const Extrema_GenExtPS& );
+  Extrema_GenExtPS            (const Extrema_GenExtPS& ) Standard_DELETE;
+  Extrema_GenExtPS& operator= (const Extrema_GenExtPS& ) Standard_DELETE;
 
 private:
 

src/Extrema/Extrema_GenExtSS.hxx

@@ -89,8 +89,8 @@ public:
 private:
 
   // disallow copies
-  Extrema_GenExtSS            (const Extrema_GenExtSS& );
-  Extrema_GenExtSS& operator= (const Extrema_GenExtSS& );
+  Extrema_GenExtSS            (const Extrema_GenExtSS& ) Standard_DELETE;
+  Extrema_GenExtSS& operator= (const Extrema_GenExtSS& ) Standard_DELETE;
 
 private:
 

src/Standard/Standard_Macro.hxx

@@ -37,6 +37,18 @@
   #define Standard_OVERRIDE
 #endif
 
+//! @def Standard_DELETE
+//! Alias for C++11 keyword "=delete" marking methods to be deleted.
+#if defined(__cplusplus) && (__cplusplus >= 201100L)
+  // part of C++11 standard
+  #define Standard_DELETE =delete
+#elif defined(_MSC_VER) && (_MSC_VER >= 1800)
+  // implemented since VS2013
+  #define Standard_DELETE =delete
+#else
+  #define Standard_DELETE
+#endif
+
 //! @def Standard_FALLTHROUGH
 //! Should be used in a switch statement immediately before a case label,
 //! if code associated with the previous case label may fall through to that

tests/bugs/filling/bug22783

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "==========="
 puts "0022783: Improvement of BRepOffsetAPI_MakeFilling: keep old and new boundary edges with all pcurves"
 puts "==========="

tests/bugs/filling/bug22786

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "============"
 puts "0022786: 64bit issue in AdvApp2Var"
 puts "============"

tests/bugs/modalg_2/bug23367_2

@@ -2,7 +2,6 @@ puts "============"
 puts "CR23367"
 puts "============"
 puts ""
-puts "TODO OCC24156 MacOS: Error : The length of result shape is"
 ##########################################################################################################
 # New functionality restoring the middle path of pipe-like shape
 ##########################################################################################################

tests/bugs/modalg_2/bug426

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 pload QAcommands
 
 puts "========"

tests/bugs/modalg_2/bug474

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: Tcl Exception"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "========================"
 puts " OCC474 "
 puts "========================"

tests/bugs/modalg_2/bug487

@@ -1,7 +1,3 @@
-puts "TODO OCC24156 MacOS: Faulty OCC485: function BLEND works wrongly"
-puts "TODO OCC24156 MacOS: Tcl Exception: result is not a topological shape!!!"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "========================"
 puts " OCC487 "
 puts "========================"

tests/bugs/modalg_4/bug625

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: Tcl Exception: tolerance ang"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "========================"
 puts "OCC625"
 puts "========================"

tests/bugs/modalg_4/bug8842_11

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: OCC8842: Faulty"
-
 puts "============"
 puts "00008842: E r r o r s in Offset Shape algorithm working with bspline and surface of revolution"
 puts "============"

tests/bugs/modalg_4/bug8842_12

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: OCC8842: Faulty"
-
 puts "============"
 puts "00008842: E r r o r s in Offset Shape algorithm working with bspline and surface of revolution"
 puts "============"

tests/bugs/modalg_4/bug8842_3

@@ -1,7 +1,5 @@
 puts "TODO OCC25913 ALL: Error :  is WRONG because number of"
 puts "TODO OCC25913 ALL: Error : The area of result shape is"
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: OCC8842: Faulty"
 
 puts "============"
 puts "00008842: E r r o r s in Offset Shape algorithm working with bspline and surface of revolution"

tests/bugs/modalg_5/bug23870_1

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "============"
 puts "0023870: Integration of new options of sweeping into BRepOffsetAPI_MakePipe algorithm"
 puts "============"

tests/bugs/modalg_5/bug23870_2

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "============"
 puts "0023870: Integration of new options of sweeping into BRepOffsetAPI_MakePipe algorithm"
 puts "============"

tests/bugs/modalg_5/bug23870_4

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "============"
 puts "0023870: Integration of new options of sweeping into BRepOffsetAPI_MakePipe algorithm"
 puts "============"

tests/bugs/moddata_2/bug266

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: Tcl Exception: compute of chamfer failed"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "================"
 puts "OCC266"
 puts "================"

tests/bugs/step/buc60948

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: \\*\\*\\* Abort"
-puts "TODO OCC24156 MacOS: ... The exception is"
-
 puts "========================"
 puts "BUC60948"
 puts "========================"

tests/bugs/xde/bug26174

@@ -1,5 +1,5 @@
-puts "TODO OCC26174 ALL: ERROR: OCC26174 is reproduced."
-
+puts "TODO OCC26174 Windows: ERROR: OCC26174 is reproduced."
+puts "TODO OCC26174 Linux: ERROR: OCC26174 is reproduced."
 puts "========"
 puts "OCC26174"
 puts "========"

tests/chamfer/data/complex/B4

@@ -5,5 +5,5 @@ set chamf_dist_dist  [list "0.05 0.05" "0.05 0.09" "0.1 0.08"]
 set chamf_equal_dist [list "0.05     " "0.05     " "0.2     "]
 if { [string compare $command chamf_sequence] == 0 && [string compare $group equal_dist] == 0 } {
   puts "TODO OCC22909 ALL:Faulty shapes in variables faulty_1 to faulty_"
-  puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
+#  puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
 }

tests/chamfer/data/complex/B5

@@ -8,14 +8,14 @@ if { [string compare $command chamf] == 0 } {
     puts "TODO OCC22909 All: compute of chamfer failed"
   }
 } else {
-  if {[string compare $group dist_angle] == 0} {
-    puts "TODO OCC22909 MacOS: compute of chamfer failed"
-  }
-  if {[string compare $group dist_dist] == 0} {
-    puts "TODO OCC22909 MacOS: compute of chamfer failed"
-  }
+#  if {[string compare $group dist_angle] == 0} {
+#    puts "TODO OCC22909 MacOS: compute of chamfer failed"
+#  }
+#  if {[string compare $group dist_dist] == 0} {
+#    puts "TODO OCC22909 MacOS: compute of chamfer failed"
+#  }
   if {[string compare $group equal_dist] == 0} {
     puts "TODO OCC22909 ALL:Faulty shapes in variables faulty_1 to faulty_"
-    puts "TODO OCC22909 MacOS: compute of chamfer failed"
+#    puts "TODO OCC22909 MacOS: compute of chamfer failed"
   }
 }

tests/chamfer/data/complex/B6

@@ -10,12 +10,12 @@ if { [string compare $command chamf] == 0 } {
 } else {
   if {[string compare $group dist_angle] == 0} {
     puts "TODO OCC22909 All:Faulty shapes in variables faulty_1 to faulty_"
-    puts "TODO OCC24156 MacOS: compute of chamfer failed"
-  }
-  if {[string compare $group dist_dist] == 0} {
-    puts "TODO OCC24156 MacOS: compute of chamfer failed"
-  }
-  if {[string compare $group equal_dist] == 0} {
-    puts "TODO OCC24156 MacOS: compute of chamfer failed"
+#    puts "TODO OCC24156 MacOS: compute of chamfer failed"
   }
+#  if {[string compare $group dist_dist] == 0} {
+#    puts "TODO OCC24156 MacOS: compute of chamfer failed"
+#  }
+#  if {[string compare $group equal_dist] == 0} {
+#    puts "TODO OCC24156 MacOS: compute of chamfer failed"
+#  }
 }

tests/chamfer/data/complex/B7

@@ -5,16 +5,11 @@ set chamf_dist_dist  [list "0.1 0.11" " 0.2 0.21"]
 set chamf_equal_dist [list "0.1     " " 0.2     "]
 if { [string compare $command chamf] == 0 } {
   puts "TODO OCC22909 All: compute of chamfer failed"
-} else {
-  if {[string compare $group dist_angle] == 0} {
-    puts "TODO OCC22909 MacOS: compute of chamfer failed"
   } else {
+  if {[string compare $group dist_dist] == 0} {
     puts "TODO OCC22909 ALL:Faulty shapes in variables faulty_1 to faulty_"
   }
-  if {[string compare $group dist_dist] == 0} {
-    puts "TODO OCC22909 MacOS: compute of chamfer failed"
-  }
   if {[string compare $group equal_dist] == 0} {
-    puts "TODO OCC22909 MacOS: compute of chamfer failed"
+    puts "TODO OCC22909 ALL:Faulty shapes in variables faulty_1 to faulty_"
   }
 }

tests/chamfer/data/complex/B9

@@ -25,16 +25,16 @@ if { [string compare $command chamf_sequence] == 0 } {
 
   if { [checkplatform -osx] } {
     if { [string compare $group dist_dist] == 0 } {
-      puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
+  #    puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
       set nf 8
     }
     if { [string compare $group equal_dist] == 0 } {
-      puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
+  #    puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
       set nf 2
     }
-    if { [string compare $group dist_angle] == 0 } {
-      puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
-    }
+ #   if { [string compare $group dist_angle] == 0 } {
+ #     puts "TODO OCC24156 MacOS: chamfer is not done. compute of chamfer failed"
+ #   }
   }  
 
   if { $nf != 0 } {

tests/de_mesh/gltf_read/begin

@@ -1,4 +1,4 @@
 pload XDE OCAF MODELING VISUALIZATION
 Close D -silent
 # PBR requires OpenGL 3.0+ on macOS
-if { $::tcl_platform(os) == "Darwin" } { vcaps -core }
+if { $::tcl_platform(os) == "Darwin" } { vdriver -load OPENGL; vcaps -core }

tests/de_mesh/gltf_write/begin

@@ -1,4 +1,4 @@
 pload XDE OCAF MODELING VISUALIZATION
 Close D -silent
 # PBR requires OpenGL 3.0+ on macOS
-if { $::tcl_platform(os) == "Darwin" } { vcaps -core }
+if { $::tcl_platform(os) == "Darwin" } { vdriver -load OPENGL; vcaps -core }

tests/de_mesh/obj_read/begin

@@ -1,4 +1,4 @@
 pload XDE OCAF MODELING VISUALIZATION
 Close D -silent
 # PBR requires OpenGL 3.0+ on macOS
-if { $::tcl_platform(os) == "Darwin" } { vcaps -core }
+if { $::tcl_platform(os) == "Darwin" } { vdriver -load OPENGL; vcaps -core }

tests/heal/fix_face_size/B4

@@ -1,3 +1 @@
-puts "TODO OCC24156 MacOS: Faulty shapes in variables faulty_1 to faulty_"
-
 restore [locate_data_file CTO900_pro5363c.rle] a

tests/heal/fix_face_size/C1

@@ -1,6 +1,5 @@
 if { [info exists bug23197] == 0 || $bug23197 == 0 } {
     puts "TODO OCC23127 ALL: Faulty shapes in variables faulty_1 to faulty_2"
 }
-puts "TODO OCC24156 MacOS: Faulty shapes in variables faulty_1 to faulty_"
 
 restore [locate_data_file rrr.rle] a

tests/offset/faces_type_i/D7

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 ellipse w1 0 0 0 15 10
 mkedge w1 w1 0 pi/2

tests/offset/faces_type_i/E7

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/E8

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/E9

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/F2

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/F3

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/F4

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/F5

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/G5

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 ellipse w1 0 0 0 15 10
 mkedge w1 w1 0 pi/2

tests/offset/faces_type_i/L1

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/faces_type_i/L2

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/faces_type_i/L3

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/faces_type_i/L4

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/faces_type_i/L5

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/faces_type_i/L6

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/faces_type_i/L7

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 beziercurve w1 5 0 0 0 20 0 0 20 5 0 25 10 0 10 20 0
 mkedge w1 w1 

tests/offset/faces_type_i/L8

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 beziercurve w1 5 0 0 0 20 0 0 20 5 0 25 10 0 10 20 0
 mkedge w1 w1 

tests/offset/faces_type_i/L9

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 beziercurve w1 5 0 0 0 20 0 0 20 5 0 25 10 0 10 20 0
 mkedge w1 w1 

tests/offset/faces_type_i/M1

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 beziercurve w1 5 0 0 0 20 0 0 20 5 0 25 10 0 10 20 0
 mkedge w1 w1 

tests/offset/faces_type_i/M3

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 beziercurve w1 5 0 0 0 20 0 0 20 5 0 25 10 0 10 20 0
 mkedge w1 w1 

tests/offset/faces_type_i/N1

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23748 ALL: ERROR. offsetperform operation not done."
 puts "TODO OCC23748 ALL: Error: The command cannot be built"
 puts "TODO OCC26556 ALL: Error : The offset cannot be built."

tests/offset/faces_type_i/N2

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 beziersurf c 3 2 \
 0 0 0 0 5 5 2 14 3 \

tests/offset/shape_type_i/C5

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 puts "TODO OCC23068 ALL: Error: bsection of the result and s is not equal to zero."
 
 ellipse w1 0 0 0 15 10

tests/offset/shape_type_i/D6

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 ellipse w1 0 0 0 15 10
 mkedge w1 w1 0 pi/2

tests/offset/shape_type_i/D7

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 ellipse w1 0 0 0 15 10
 mkedge w1 w1 0 pi/2

tests/offset/shape_type_i/G2

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/shape_type_i/G3

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 bsplinecurve w1 3 2  -1.0 4   1.0 4  0 0 0 1  2 10 0 1  4 6 0 1  10 0 0 1
 mkedge w1 w1 

tests/offset/shape_type_i/G4

@@ -1,5 +1,5 @@
-puts "TODO OCC24156 MacOS: An exception was caught"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
+
+
 
 beziercurve w1 5 0 0 0 20 0 0 20 5 0 25 10 0 10 20 0
 mkedge w1 w1 

tests/offset/wire_closed_inside_0_005/I8

@@ -1,5 +1,3 @@
-puts "TODO OCC24156 MacOS: Error : The resulting shape is WRONG"
-
 restore [locate_data_file offset_wire_103.brep] s
 
 set length 316.751

tests/offset/wire_closed_inside_0_025/I8

@@ -1,5 +1,3 @@
-puts "TODO OCC24156 MacOS: Error : The resulting shape is WRONG"
-
 restore [locate_data_file offset_wire_103.brep] s
 
 set length 245.13

tests/offset/wire_closed_inside_0_075/I8

@@ -1,5 +1,3 @@
-puts "TODO OCC24156 MacOS: Error : The resulting shape is WRONG"
-
 restore [locate_data_file offset_wire_103.brep] s
 
 set length 94.1559

tests/offset/wire_closed_outside_0_005/I4

@@ -1,4 +1,3 @@
-puts "TODO OCC23068 MacOS: Error : The resulting shape is WRONG"
 restore [locate_data_file offset_wire_099.brep] s
 
 set length 302.636

tests/offset/wire_closed_outside_0_025/I4

@@ -1,4 +1,3 @@
-puts "TODO OCC23068 MacOS: Error : The resulting shape is WRONG"
 restore [locate_data_file offset_wire_099.brep] s
 
 set length 325.844

tests/offset/wire_unclosed_outside_0_075/A1

@@ -1,6 +1,9 @@
-puts "TODO OCC23748 ALL: Error : The offset cannot be built."
-puts "TODO OCC23748 ALL: Error: The command cannot be built"
-puts "TODO OCC23748 ALL: Error: Offset is not done."
+puts "TODO OCC23748 Windows: Error : The offset cannot be built."
+puts "TODO OCC23748 Windows: Error: The command cannot be built"
+puts "TODO OCC23748 Windows: Error: Offset is not done."
+puts "TODO OCC23748 Linux: Error : The offset cannot be built."
+puts "TODO OCC23748 Linux: Error: The command cannot be built"
+puts "TODO OCC23748 Linux: Error: Offset is not done."
 puts "TODO OCC24156 MacOS: Error : The length of result shape is"
 puts "TODO OCC24156 MacOS: Error : The resulting shape is WRONG"
 

tests/opengl/data/transparency/oit

@@ -43,7 +43,7 @@ vcaps -opaqueAlpha 0
 
 # VTK viewer, just for comparison
 set hasVtk 0
-if { [vdriver -default] == "TKOpenGl" } {
+if { [vdriver -default] == "TKOpenGl" && $::tcl_platform(os) != "Darwin" } {
   set hasVtk 1
   if { [catch { pload VIS }] } { set hasVtk 0 }
 }

tests/perf/modalg/bug453_1

@@ -1,6 +1,3 @@
-puts "TODO OCC24156 MacOS: Tcl Exception:"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
-
 puts "========"
 puts "OCC453"
 puts "(case 1)"

tests/perf/moddata/bug453_3

@@ -1,5 +1,3 @@
-puts "TODO OCC24156 MacOS: Tcl Exception: tolerance ang"
-puts "TODO OCC24156 MacOS: TEST INCOMPLETE"
 puts "TODO OCC27203 ALL: Error: Max tolerance" 
 ##puts "TODO OCC27203 All: Error : The area of result shape is"
 

tests/v3d/bugs/bug288_6

@@ -2,8 +2,6 @@ puts "================"
 puts "OCC288: Currently meshing (for shading) of some shapes looks incorrect"
 puts "================"
 puts ""
-puts "TODO #23828 MacOS: Tcl Exception: result is not a topological shape!!!"
-puts "TODO #23828 MacOS: TEST INCOMPLETE"
 
 pload MODELING VISUALIZATION
 restore [locate_data_file OCC288-shading_176.brep] result

tools/TInspectorAPI/TInspectorAPI_Communicator.cxx

@@ -39,6 +39,9 @@ TInspectorAPI_Communicator* TInspectorAPI_Communicator::LoadPluginLibrary
   TCollection_AsciiString aPluginLibraryName = thePluginName;
 #ifdef _WIN32
   aPluginLibraryName += ".dll";
+#elif __APPLE__
+  aPluginLibraryName.Prepend ("lib");
+  aPluginLibraryName += ".dylib";  
 #else
   aPluginLibraryName.Prepend ("lib");
   aPluginLibraryName += ".so";

tools/VInspector/VInspector_Window.cxx

@@ -438,7 +438,7 @@ bool VInspector_Window::OpenFile(const TCollection_AsciiString& theFileName)
   Handle(AIS_Shape) aPresentation = new AIS_Shape (aShape);
   aPresentation->Attributes()->SetAutoTriangulation (Standard_False);
 
-  View_Displayer* aDisplayer = myViewWindow->Displayer();
+  View_Displayer* aDisplayer = displayer();
   aDisplayer->DisplayPresentation (aPresentation);
   aContext->UpdateCurrentViewer();