0033855: Data Exchange - XCAFDoc_ShapeTool::GetShape() throws Standard_NullObject exception after partial read of XBF document

Resolve missed references until all are resolved to produce expected result without exceptions.

.github/CLA.md

@@ -0,0 +1,59 @@
+# Contributor License Agreement - OPEN CASCADE TECHNOLOGY
+
+Thank You for Your interest in Open CASCADE Technology.
+
+In order to clarify the intellectual property rights and the license granted to OPEN CASCADE SAS with contributions from You, any person or entity, OPEN CASCADE SAS must have this Contributor License Agreement (hereinafter referred to as "CLA") signed by You, indicating Your acceptance and consent to the license terms below. This license is for Your protection as a contributor as well as for the protection of OPEN CASCADE SAS and its users; it does not change Your rights to use Your own contributions for any other purpose.
+
+This CLA applies to any contribution that You make to the product "Open CASCADE Technology" (hereinafter referred to as "OCCT", "the Product") developed by OPEN CASCADE SAS, including all contributions You made prior to signing this CLA and all of Your future contributions submitted to OPEN CASCADE SAS as long as You agree to this CLA, and sets out the intellectual property rights You grant to OPEN CASCADE SAS in the contributed materials. The term "us" shall also mean OPEN CASCADE SAS.
+
+The term "You" shall mean the person or entity identified below, representing the copyright owner or legal entity authorized by the copyright owner that is making this agreement with OPEN CASCADE SAS. For legal entities, the entity making a contribution and all other entities that control, are controlled by, or are under common control with that entity are considered to be a single contributor. For the purposes of this definition, "control" means (i) the power, either direct or indirect, to exert influence on the direction or management of such entity, whether by contract or otherwise, or (ii) the ownership of fifty percent (50%) or more of the outstanding shares, or (iii) the beneficial ownership of such entity.
+
+Read this CLA carefully before signing and keep a copy for Your records. This CLA, its terms and conditions, constitute a binding legal agreement.
+
+If You agree to be bound by the terms of this CLA, please complete and sign this CLA where indicated below, then scan and submit the scanned copy as a PDF file to OPEN CASCADE SAS via Your user account section on the Web portal. Alternatively, You may send the signed CLA to OPEN CASCADE SAS by facsimile or in hard copy to the attention of DANIEL BRUNIER-COULIN at OPEN CASCADE SAS headquarters using the contact information provided in the "Contact Us" section.
+
+1. The term "contribution" or "contributed materials" means any source code, object code, patch, tool, sample, graphic, specification, manual, documentation, any original work of authorship, including any modifications or additions to an existing work or any other material intentionally posted or submitted by You to us. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to OPEN CASCADE SAS or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, OPEN CASCADE SAS for the purpose of, but not limited to, discussing and improving a work or possible integration to future certified releases of OCCT, but excluding communication that is conspicuously marked or otherwise designated in writing by You or OPEN CASCADE SAS as "Not A Contribution" or "NAC".
+
+2. With respect to any worldwide copyrights, or copyright applications and registrations, in Your contribution:
+
+   a) You hereby assign to OPEN CASCADE SAS joint ownership, and to the extent that such assignment is or becomes invalid, ineffective or unenforceable, You hereby grant to OPEN CASCADE SAS a perpetual, irrevocable, non-exclusive, worldwide, no-charge, royalty-free, unrestricted license to exercise all rights under the intellectual property law and rules in force or under the copyright if chosen by OPEN CASCADE SAS. This includes, at the option of OPEN CASCADE SAS, the right to sublicense these same rights to third parties through multiple levels of sub-licensees or other licensing arrangements;
+
+   b) You agree that OPEN CASCADE SAS can do all things in relation to Your contribution as if OPEN CASCADE SAS were its sole owner, and if OPEN CASCADE SAS makes a derivative work of Your contribution, OPEN CASCADE SAS will be the sole owner of that derivative work;
+
+   c) You agree that You will not assert any moral rights in Your contribution against OPEN CASCADE SAS, our licensees or transferees;
+
+   d) You agree that OPEN CASCADE SAS may register a copyright or any other intellectual property law in force in Your contribution and exercise all ownership rights associated with it; and
+
+   e) You agree that OPEN CASCADE SAS has no duty to consult with, obtain the consent of, pay or render an accounting to You or any third parties for any use or distribution of Your contribution.
+
+3. With respect to any patents You own, or that You can license without payment to any third party, You hereby grant to OPEN CASCADE SAS a perpetual, irrevocable, non-exclusive, worldwide, no-charge, royalty-free, unrestricted license to:
+
+   a) make, have made, use, sell, offer to sell, import, and otherwise transfer Your contribution in whole or in part, alone or in combination with or included in any product, work or materials arising out of the Product which Your contribution was submitted for;
+
+   b) sublicense these same rights to third parties through multiple levels of sub-licensees or other licensing arrangements; and
+
+   c) reproduce, prepare derivative works of, publicly display, publicly perform, sublicense, and distribute Your contributions and such derivative works.
+
+4. Except as set out above, You keep all right, title, and interest in Your contribution. The rights that You grant to OPEN CASCADE SAS under these terms are effective on the date You first submitted a contribution to OPEN CASCADE SAS, even if Your submission took place before the date You sign these terms. Any contribution OPEN CASCADE SAS makes available under any license will also be made available under the Open Cascade Technology Public License (OCCTPL) or a suitable FSF (Free Software Foundation) or OSI (Open Source Initiative) approved license, if adopted by OPEN CASCADE SAS.
+
+5. You covenant, represent and warrant that:
+
+   a) each contribution that You submit is and shall be an original work of authorship and that You can legally grant the rights set out in this CLA; and
+
+   b) each contribution will not violate any third party's copyrights, trademarks, patents, or other intellectual property rights; and
+
+   c) if any entity institutes patent litigation against You or any other entity (including a cross-claim or counterclaim in a lawsuit) alleging that Your contribution, or the work to which You have contributed, constitutes direct or contributory patent infringement, then any patent licenses granted to that entity under this CLA for that contribution or work shall terminate as of the date such litigation is filed; and
+
+   d) You have received permission to make contributions on behalf of the employer, that Your employer has waived such rights for Your contributions to OPEN CASCADE SAS, or that Your employer (that has rights to intellectual property that You create that includes Your contributions) has executed a separate corporate CLA with OPEN CASCADE SAS.
+
+6. Should You wish to submit work that is not Your original creation, You may submit it to OPEN CASCADE SAS separately from any contribution, identifying the complete details of its source and of any license or other restriction (including, but not limited to, related patents, trademarks, and license agreements), and conspicuously marking the work as "Submitted on behalf of a third-party: [named here]".
+
+7. You agree to notify OPEN CASCADE SAS if You become aware of any circumstance which would make any of the foregoing representations inaccurate in any respect. OPEN CASCADE SAS may publicly disclose Your contribution to the Product and the fact that You have signed this CLA.
+
+8. You are not expected to provide support for Your contributions, except to the extent You desire to provide support.
+
+9. This CLA is governed by the laws of France or an applicable law at the sole written choice of OPEN CASCADE SAS.
+
+10. You may stop being bound by the terms of this CLA at any time, for any reason, by asking OPEN CASCADE through the Contact Us form. Even after its termination, this CLA still applies to all contributions You made prior to terminating the CLA. On the other hand, if You want to contribute again, You'll need to sign a new CLA.
+
+[Contributor_License_Agreement.pdf](https://dev.opencascade.org/sites/default/files/Contributor_License_Agreement.pdf)

.github/CLA_SIGNING.md

@@ -0,0 +1,39 @@
+# Signing the Contributor License Agreement
+
+## In order to contribute code to OCCT, you (or the legal entity you represent) must sign the Contributor License Agreement (CLA).
+
+### What is the Contributor License Agreement and why is it necessary to sign it?
+The Contributor License Agreement is needed to clarify the terms of usage of contributions by OPEN CASCADE SAS and the entire open source community.
+
+The Contributor License Agreement clarifies the intellectual property rights applicable to contributions. It confirms that the contributor retains ownership of his contributions (the OPEN CASCADE company does not require exclusive copyright transfer for these contributions) and gives all rights to OPEN CASCADE to use the contribution. In turn, OPEN CASCADE guarantees the open source availability of all integrated contributions.
+
+### How to sign the Contributor License Agreement
+Accepting and signing the Contributor License Agreement is a prerequisite for contributing code. To sign the CLA, please register yourself first, and then follow the steps below:
+1. Select the "Get Involved" menu
+2. Download the Contribution License Agreement pdf file and print it
+3. Read the agreement and sign it
+4. Scan the signed CLA to a pdf file
+5. If not yet done, log on to this website
+6. In the CLA sending form, press the "Browse" button
+7. Select your signed CLA file
+8. Press "Send"
+
+We will need some time to approve the CLA that you have submitted. You will be notified by e-mail when your CLA is approved and you are assigned the Contributor role.
+
+### Q&A on the Contribution Agreement
+
+**I want to contribute code that I developed as part of my job. Can I contribute this code?**
+
+Yes, but as (under applicable legislation) your employer typically will own all intellectual property that you create as part of your employment, it is important that your employer has consented to your participation and contributions in the OCCT Project. That provides clarity to all parties involved.
+
+**Can we sign a CLA to enable contributions from several employees in our company?**
+
+Yes, if your company has several employees ready to contribute, a person representing your company can sign the CLA whereby your employer can specify and manage who is able to contribute from your company.
+
+**I want to notify the OCCT Project of a bug I found. Can I report this bug?**
+
+Yes, you simply need to register (you then become a Member) for entering a bug. The bug can be entered using our bug tracker from the Get Involved page. But please note that as a Member of this project, you have accepted the Terms and Conditions of this website, so the materials you provide must conform to these Terms.
+
+**Can I terminate my Contributor License Agreement?**
+
+Yes, you may terminate your Contributor License Agreement by sending a written notice through the contact form of this portal. The termination of your CLA will become effective not later than 5 days from the notice date. Please note, however, that all contributions you might have made to the OCCT Project before your CLA termination remain covered by that CLA.

.github/CONTRIBUTING.md

@@ -0,0 +1,41 @@
+# Contributing to OCCT
+
+## Contribute Code
+
+In order to contribute code to OCCT, you must register on this [portal](https://dev.opencascade.org/) and sign the Contributor License Agreement (CLA).
+
+- [Introduction: What is CLA and Why It Is Needed?](CLA_SIGNING.md)
+- [Contribution License Agreement](CLA.md)
+- [CLA Submission Form](https://dev.opencascade.org/get_involed/cla_submission_form)
+
+### Steps to Submit Your Contribution
+1. **Clone OCCT Git Repository**: See [Guide to installing and using Git for OCCT development](https://dev.opencascade.org/doc/overview/html/occt_contribution__git_guide.html) if you are not familiar with Git.
+2. **Develop Your Change**: Ensure it complies with [OCCT Coding Rules](https://dev.opencascade.org/doc/overview/html/occt_contribution__coding_rules.html).
+3. **Build and Verify**: Build the modified version of OCCT and verify it works as expected. Consider creating a test case.
+4. **Register an Issue**: Register an issue in the [Mantis bug tracker](https://tracker.dev.opencascade.org/login_select_proj_page.php?ref=bug_report_page.php) or [GitHub issues](https://github.com/Open-Cascade-SAS/OCCT/issues) describing your change.
+5. **Push Your Change**: Push your change to the Git repository in a branch with a name starting with "CR" followed by the issue ID, then switch the issue to Resolved.
+
+The contribution then passes code review and testing; if everything is OK, it will be integrated into the master branch in about one week.
+
+See [Contribution Workflow](https://dev.opencascade.org/doc/overview/html/occt_contribution__contribution_workflow.html) for other possibilities and details on how contributions are processed.
+
+For more details on integration into GitHub, see the [GitHub Discussions Guide](https://github.com/Open-Cascade-SAS/OCCT/discussions/36).
+
+## Contribute Ideas
+
+Every big thing starts with an idea. We appreciate your vision on how to enhance Open CASCADE technology. Share your thoughts on the [OCCT product development forum](https://dev.opencascade.org/forums) or submit your meaningful ideas and bug reports via [Mantis tracker](https://tracker.dev.opencascade.org) or [GitHub issues](https://github.com/Open-Cascade-SAS/OCCT/issues).
+
+- **Forum**: [OCCT product development forum](https://dev.opencascade.org/forums)
+- **Reporting Issues**: [Mantis tracker](https://tracker.dev.opencascade.org) or [GitHub issues](https://github.com/Open-Cascade-SAS/OCCT/issues)
+
+## Contribute Knowledge
+
+Know a lot about OCCT? You can help educate other OCCT users by writing OCCT-related articles or blog posts, creating samples, examples, or tutorials, and even by writing a book about OCCT! If you would like us to share your content via official OCCT resources, please [contact us](https://dev.opencascade.org/webform/contact_us).
+
+## Contribute Documentation and Tutorials
+
+Do you have an idea on how to make OCCT Documentation easier for new users or even more exhaustive for professionals? Or want to help with proofreading and technical writing? Translating OCCT Documentation and materials into your native language is also very much appreciated. You are always welcome to submit your documentation improvement suggestions via [Mantis tracker](https://tracker.dev.opencascade.org) or [GitHub issues](https://github.com/Open-Cascade-SAS/OCCT/issues)..
+
+## Contribute to the Community
+
+At any community interaction points, we value your support in starting forum topics or replying to other users’ posts, joining Open CASCADE social networks, participating in GitHub or Stack Overflow projects, and just spreading the word about OCCT! Welcome to our community!

.github/ISSUE_TEMPLATE/Bug Report.yaml

@@ -0,0 +1,142 @@
+name: "Bug Report"
+description: "Report a bug related to the OCCT"
+labels: ["2. Bug"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        **Please provide the following information:**
+  - type: dropdown
+    attributes:
+      label: Category
+      description: "Select the bug category"
+      options:
+        - Application Framework
+        - Build
+        - Coding
+        - Configuration
+        - Data Exchange
+        - Documentation
+        - DRAW
+        - Foundation Classes
+        - Mesh
+        - Modeling
+        - Samples
+        - Shape Healing
+        - Testing
+        - Visualization
+    validations:
+      required: true
+  - type: dropdown
+    id: severity
+    attributes:
+      label: Severity
+      description: "Select the bug severity"
+      options:
+        - Crash
+        - Critical
+        - Major
+        - Minor
+        - Trivial
+      default: 2
+    validations:
+      required: true
+  - type: textarea
+    id: description
+    attributes:
+      label: Description
+      description: "A detailed description of the bug"
+    validations:
+      required: true
+  - type: textarea
+    id: expected_behavior
+    attributes:
+      label: Expected Behavior
+      description: "What you expected to happen"
+    validations:
+      required: true
+  - type: textarea
+    id: actual_behavior
+    attributes:
+      label: Actual Behavior
+      description: "What actually happened"
+    validations:
+      required: true
+  - type: textarea
+    id: sample_code
+    attributes:
+      label: Sample Code or DRAW Tcl Script
+      description: "Provide a C++ sample or DRAW Tcl script to reproduce the issue"
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating System
+      description: "Select the operating system"
+      options:
+        - Linux
+        - Windows
+        - macOS
+      default: 0
+    validations:
+      required: true
+  - type: dropdown
+    id: compiler
+    attributes:
+      label: Compiler
+      description: "Select the compiler"
+      options:
+        - GCC
+        - Clang
+        - MSVC
+      default: 0
+    validations:
+      required: true
+  - type: input
+    id: compiler_version
+    attributes:
+      label: Compiler Version
+      description: "Specify the compiler version (optional)"
+  - type: dropdown
+    id: bitness
+    attributes:
+      label: Bitness
+      description: "Select the bitness"
+      options:
+        - 32-bit
+        - 64-bit
+      default: 1
+    validations:
+      required: true
+  - type: dropdown
+    id: occt_version
+    attributes:
+      label: OCCT Version
+      description: "Select the OCCT version where the issue was detected"
+      options:
+        - 7.4
+        - 7.5
+        - 7.6
+        - 7.7
+        - 7.8
+        - 7.9
+        - latest
+      default: 6
+    validations:
+      required: true
+  - type: input
+    id: precise_occt_version
+    attributes:
+      label: Precise OCCT Version or Branch
+      description: "Specify the precise OCCT version, branch, or SSH (optional)"
+  - type: input
+    id: environment
+    attributes:
+      label: Environment
+      description: "Details about your environment (OS, compiler, etc.)"
+  - type: textarea
+    id: additional_files
+    attributes:
+      label: Additional Files
+      description: "Attach any additional files that may help in reproducing the issue"

.github/ISSUE_TEMPLATE/Feature Request.yaml

@@ -0,0 +1,55 @@
+name: "Feature Request"
+description: "Request a new feature or enhancement for the OCCT"
+labels: ["2. Enhancement"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        **Please provide the following information:**
+  - type: dropdown
+    attributes:
+      label: Category
+      description: "Select the bug category"
+      options:
+        - Application Framework
+        - Build
+        - Coding
+        - Configuration
+        - Data Exchange
+        - Documentation
+        - DRAW
+        - Foundation Classes
+        - Mesh
+        - Modeling
+        - Samples
+        - Shape Healing
+        - Testing
+        - Visualization
+    validations:
+      required: true
+  - type: textarea
+    id: description
+    attributes:
+      label: Description
+      description: "A detailed description of the feature request"
+    validations:
+      required: true
+  - type: textarea
+    id: use_case
+    attributes:
+      label: Use Case
+      description: "Describe the use case for the feature"
+    validations:
+      required: true
+  - type: textarea
+    id: benefits
+    attributes:
+      label: Benefits
+      description: "Explain the benefits of the feature"
+    validations:
+      required: true
+  - type: textarea
+    id: additional_context
+    attributes:
+      label: Additional Context
+      description: "Any additional context or information"

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,14 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Collaborative development portal
+    url: https://dev.opencascade.org/forums
+    about: You can also use the collaborative development portal to ask questions and discuss the problem you are seeing
+  - name: GitHub discussions
+    url: https://github.com/Open-Cascade-SAS/OCCT/discussions
+    about: You can also use GitHub discussions to ask questions and discuss the problem you are seeing
+  - name: Mantis bug tracker
+    url: https://tracker.dev.opencascade.org/
+    about: You can also use the Mantis bug tracker to report bugs and issues
+  - name: Contact US form
+    url: https://dev.opencascade.org/webform/contact_us
+    about: You can also use the Contact US form to ask questions and discuss the problem you are seeing

.github/workflows/build-and-test-multiplatform.yml

@@ -0,0 +1,956 @@
+# This workflow builds and tests OCCT on multiple platforms (Windows, macOS, Linux with Clang, and Linux with GCC).
+# It is triggered on pull requests to any branch.
+# The workflow includes steps to prepare and build the project on each platform, run tests, and upload the results.
+# Concurrency is set to ensure that only one instance of the workflow runs per pull request at a time.
+
+name: Build and Test OCCT on Multiple Platforms
+
+on:
+  pull_request:
+    branches:
+      - '**'
+  push:
+    branches:
+      - 'master'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
+  cancel-in-progress: true
+
+jobs:
+  prepare-and-build-windows-x64:
+    name: Prepare and Build on Windows with MSVC (x64)
+    runs-on: windows-2022
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Set up MSVC
+      uses: ilammy/msvc-dev-cmd@v1.13.0
+      with:
+        arch: x64
+
+    - name: Download and extract 3rdparty dependencies
+      run: |
+          Invoke-WebRequest -Uri https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/3rdparty-vc14-64.zip -OutFile 3rdparty-vc14-64.zip
+          Expand-Archive -Path 3rdparty-vc14-64.zip -DestinationPath .
+          Remove-Item 3rdparty-vc14-64.zip
+      shell: pwsh
+
+    - name: Download and extract Mesa3D
+      run: |
+        curl -L -o mesa3d.7z https://github.com/pal1000/mesa-dist-win/releases/download/24.2.5/mesa3d-24.2.5-release-msvc.7z
+        7z x mesa3d.7z -omesa3d
+
+    - name: Run system-wide deployment
+      run: |
+        cd mesa3d
+        .\systemwidedeploy.cmd 1
+      shell: cmd
+
+    - name: Configure OCCT
+      run: |
+          mkdir build
+          cd build
+          cmake -T host=x64 `
+                -D USE_FREETYPE=ON `
+                -D USE_TK=OFF `
+                -D BUILD_USE_PCH=ON `
+                -D BUILD_OPT_PROFILE=Production `
+                -D BUILD_INCLUDE_SYMLINK=ON `
+                -D CMAKE_BUILD_TYPE=Release `
+                -D 3RDPARTY_DIR=${{ github.workspace }}/3rdparty-vc14-64 `
+                -D INSTALL_DIR=${{ github.workspace }}/install `
+                -D USE_DRACO=ON `
+                -D USE_FFMPEG=ON `
+                -D USE_FREEIMAGE=ON `
+                -D USE_GLES2=ON `
+                -D USE_OPENVR=ON `
+                -D USE_VTK=ON `
+                -D USE_TBB=ON `
+                -D USE_RAPIDJSON=ON `
+                -D USE_OPENGL=ON ..
+      shell: pwsh
+
+    - name: Build OCCT
+      run: |
+          cd build
+          cmake --build . --target install --config Release
+
+    - name: Upload install directory
+      uses: actions/upload-artifact@v4.4.3
+      with:
+        name: install-windows-x64
+        path: install
+        retention-days: 7
+
+  prepare-and-build-windows-clang-x64:
+    name: Prepare and Build on Windows with Clang (x64)
+    runs-on: windows-2022
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Set up MSVC
+      uses: ilammy/msvc-dev-cmd@v1.13.0
+      with:
+        arch: x64
+
+    - name: Download and extract 3rdparty dependencies
+      run: |
+          Invoke-WebRequest -Uri https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/3rdparty-vc14-64.zip -OutFile 3rdparty-vc14-64.zip
+          Expand-Archive -Path 3rdparty-vc14-64.zip -DestinationPath .
+          Remove-Item 3rdparty-vc14-64.zip
+      shell: pwsh
+
+    - name: Download and extract Mesa3D
+      run: |
+        curl -L -o mesa3d.7z https://github.com/pal1000/mesa-dist-win/releases/download/24.2.5/mesa3d-24.2.5-release-msvc.7z
+        7z x mesa3d.7z -omesa3d
+
+    - name: Run system-wide deployment
+      run: |
+        cd mesa3d
+        .\systemwidedeploy.cmd 1
+      shell: cmd
+
+    - name: Configure OCCT
+      run: |
+          mkdir build
+          cd build
+          cmake -G "Ninja" `
+                -D CMAKE_C_COMPILER=clang `
+                -D CMAKE_CXX_COMPILER=clang++ `
+                -D USE_FREETYPE=ON `
+                -D USE_TK=OFF `
+                -D BUILD_USE_PCH=ON `
+                -D BUILD_OPT_PROFILE=Production `
+                -D BUILD_INCLUDE_SYMLINK=ON `
+                -D CMAKE_BUILD_TYPE=Release `
+                -D 3RDPARTY_DIR=${{ github.workspace }}/3rdparty-vc14-64 `
+                -D INSTALL_DIR=${{ github.workspace }}/install `
+                -D USE_DRACO=ON `
+                -D USE_FFMPEG=ON `
+                -D USE_FREEIMAGE=ON `
+                -D USE_GLES2=ON `
+                -D USE_OPENVR=ON `
+                -D USE_VTK=OFF `
+                -D USE_TBB=ON `
+                -D USE_RAPIDJSON=ON `
+                -D USE_OPENGL=ON ..
+      shell: pwsh
+
+    - name: Build OCCT
+      run: |
+          cd build
+          cmake --build . --target install --config Release
+
+    - name: Upload install directory
+      uses: actions/upload-artifact@v4.4.3
+      with:
+        name: install-windows-clang-x64
+        path: install
+        retention-days: 7
+
+  prepare-and-build-macos-x64:
+    name: Prepare and Build on macOS with Clang (x64)
+    runs-on: macos-15
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: |
+        brew update
+        brew install tcl-tk tbb gl2ps xerces-c \
+                     libxmu libxi libxft libxpm \
+                     glew freetype freeimage draco glfw
+
+    - name: Install rapidjson
+      run: |
+        wget https://github.com/Tencent/rapidjson/archive/858451e5b7d1c56cf8f6d58f88cf958351837e53.zip -O rapidjson.zip
+        unzip rapidjson.zip
+
+    - name: Configure OCCT
+      run: |
+        mkdir -p build
+        cd build
+        cmake -G "Unix Makefiles" \
+              -D CMAKE_C_COMPILER=clang \
+              -D CMAKE_CXX_COMPILER=clang++ \
+              -D BUILD_USE_PCH=ON \
+              -D BUILD_INCLUDE_SYMLINK=ON \
+              -D CMAKE_BUILD_TYPE=Release \
+              -D INSTALL_DIR=${{ github.workspace }}/install \
+              -D 3RDPARTY_RAPIDJSON_DIR=${{ github.workspace }}/rapidjson-858451e5b7d1c56cf8f6d58f88cf958351837e53 \
+              -D USE_RAPIDJSON=ON \
+              -D USE_DRACO=ON \
+              -D USE_FREETYPE=ON \
+              -D USE_OPENGL=ON \
+              -D USE_FREEIMAGE=ON ..
+
+    - name: Build OCCT
+      run: |
+        cd build
+        make install -j$(sysctl -n hw.logicalcpu)
+
+    - name: Upload install directory
+      uses: actions/upload-artifact@v4.4.3
+      with:
+        name: install-macos-x64
+        path: install
+        retention-days: 7
+
+  prepare-and-build-macos-gcc-x64:
+    name: Prepare and Build on macOS with GCC (x64)
+    runs-on: macos-15
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: |
+        brew update
+        brew install gcc tcl-tk tbb gl2ps xerces-c \
+                     libxmu libxi libxft libxpm \
+                     glew freetype freeimage draco glfw
+
+    - name: Install rapidjson
+      run: |
+        wget https://github.com/Tencent/rapidjson/archive/858451e5b7d1c56cf8f6d58f88cf958351837e53.zip -O rapidjson.zip
+        unzip rapidjson.zip
+
+    - name: Configure OCCT
+      run: |
+        mkdir -p build
+        cd build
+        cmake -G "Unix Makefiles" \
+              -D CMAKE_C_COMPILER=gcc \
+              -D CMAKE_CXX_COMPILER=g++ \
+              -D BUILD_USE_PCH=ON \
+              -D BUILD_INCLUDE_SYMLINK=ON \
+              -D CMAKE_BUILD_TYPE=Release \
+              -D INSTALL_DIR=${{ github.workspace }}/install \
+              -D 3RDPARTY_RAPIDJSON_DIR=${{ github.workspace }}/rapidjson-858451e5b7d1c56cf8f6d58f88cf958351837e53 \
+              -D USE_RAPIDJSON=ON \
+              -D USE_DRACO=ON \
+              -D USE_FREETYPE=ON \
+              -D USE_OPENGL=ON \
+              -D USE_FREEIMAGE=ON ..
+
+    - name: Build OCCT
+      run: |
+        cd build
+        make install -j$(sysctl -n hw.logicalcpu)
+
+    - name: Upload install directory
+      uses: actions/upload-artifact@v4.4.3
+      with:
+        name: install-macos-gcc-x64
+        path: install
+        retention-days: 7
+
+  prepare-and-build-linux-clang-x64:
+    name: Prepare and Build on Ubuntu with Clang (x64)
+    runs-on: ubuntu-24.04
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: sudo apt-get update && sudo apt-get install -y tcl-dev tk-dev cmake clang make libbtbb-dev libx11-dev libglu1-mesa-dev tcllib tcl-thread tcl libvtk9-dev libopenvr-dev libdraco-dev libfreeimage-dev libegl1-mesa-dev libgles2-mesa-dev libfreetype-dev
+
+    - name: Install rapidjson
+      run: |
+        wget https://github.com/Tencent/rapidjson/archive/858451e5b7d1c56cf8f6d58f88cf958351837e53.zip -O rapidjson.zip
+        unzip rapidjson.zip
+
+    - name: Configure OCCT
+      run: |
+        mkdir -p build
+        cd build
+        cmake -G "Unix Makefiles" \
+              -D CMAKE_C_COMPILER=clang \
+              -D CMAKE_CXX_COMPILER=clang++ \
+              -D BUILD_USE_PCH=ON \
+              -D BUILD_INCLUDE_SYMLINK=ON \
+              -D BUILD_OPT_PROFILE=Production \
+              -D USE_TK=OFF \
+              -D CMAKE_BUILD_TYPE=Release \
+              -D INSTALL_DIR=${{ github.workspace }}/install \
+              -D 3RDPARTY_RAPIDJSON_DIR=${{ github.workspace }}/rapidjson-858451e5b7d1c56cf8f6d58f88cf958351837e53 \
+              -D USE_FREETYPE=ON \
+              -D USE_DRACO=ON \
+              -D USE_FFMPEG=OFF \
+              -D USE_FREEIMAGE=ON \
+              -D USE_GLES2=ON \
+              -D USE_OPENVR=ON \
+              -D USE_VTK=ON \
+              -D USE_TBB=OFF \
+              -D USE_RAPIDJSON=ON \
+              -D USE_OPENGL=ON ..
+
+    - name: Build OCCT
+      run: |
+        cd build
+        cmake --build . --target install --config Release -- -j
+
+    - name: Upload install directory
+      uses: actions/upload-artifact@v4.4.3
+      with:
+        name: install-linux-clang-x64
+        path: install
+        retention-days: 7
+
+  prepare-and-build-linux-gcc-x64:
+    name: Prepare and Build on Ubuntu with GCC (x64)
+    runs-on: ubuntu-24.04
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: sudo apt-get update && sudo apt-get install -y tcl-dev tk-dev cmake gcc g++ make libbtbb-dev libx11-dev libglu1-mesa-dev tcllib tcl-thread tcl libvtk9-dev libopenvr-dev libdraco-dev libfreeimage-dev libegl1-mesa-dev libgles2-mesa-dev libfreetype-dev
+
+    - name: Install rapidjson
+      run: |
+        wget https://github.com/Tencent/rapidjson/archive/858451e5b7d1c56cf8f6d58f88cf958351837e53.zip -O rapidjson.zip
+        unzip rapidjson.zip
+
+    - name: Configure OCCT
+      run: |
+        mkdir -p build
+        cd build
+        cmake -G "Unix Makefiles" \
+              -D CMAKE_C_COMPILER=gcc \
+              -D CMAKE_CXX_COMPILER=g++ \
+              -D BUILD_USE_PCH=ON \
+              -D BUILD_INCLUDE_SYMLINK=ON \
+              -D BUILD_OPT_PROFILE=Production \
+              -D USE_TK=OFF \
+              -D CMAKE_BUILD_TYPE=Release \
+              -D INSTALL_DIR=${{ github.workspace }}/install \
+              -D 3RDPARTY_RAPIDJSON_DIR=${{ github.workspace }}/rapidjson-858451e5b7d1c56cf8f6d58f88cf958351837e53 \
+              -D USE_FREETYPE=ON \
+              -D USE_DRACO=ON \
+              -D USE_FFMPEG=OFF \
+              -D USE_FREEIMAGE=ON \
+              -D USE_GLES2=ON \
+              -D USE_OPENVR=ON \
+              -D USE_VTK=ON \
+              -D USE_TBB=OFF \
+              -D USE_RAPIDJSON=ON \
+              -D USE_OPENGL=ON ..
+
+    - name: Build OCCT
+      run: |
+        cd build
+        cmake --build . --target install --config Release -- -j
+
+    - name: Upload install directory
+      uses: actions/upload-artifact@v4.4.3
+      with:
+        name: install-linux-gcc-x64
+        path: install
+        retention-days: 7
+
+  test-windows-x64:
+    name: Test on Windows (x64)
+    runs-on: windows-2022
+    needs: prepare-and-build-windows-x64
+
+    steps:
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Set up MSVC
+      uses: ilammy/msvc-dev-cmd@v1.13.0
+      with:
+        arch: x64
+
+    - name: Download and extract 3rdparty dependencies
+      run: |
+          Invoke-WebRequest -Uri https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/3rdparty-vc14-64.zip -OutFile 3rdparty-vc14-64.zip
+          Expand-Archive -Path 3rdparty-vc14-64.zip -DestinationPath .
+          Remove-Item 3rdparty-vc14-64.zip
+      shell: pwsh
+
+    - name: Download and extract test data
+      run: |
+        cd data
+        Invoke-WebRequest -Uri https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/opencascade-dataset-7.8.0.zip -OutFile opencascade-dataset-7.8.0.zip
+        Expand-Archive -Path opencascade-dataset-7.8.0.zip -DestinationPath .
+        Remove-Item opencascade-dataset-7.8.0.zip
+      shell: pwsh
+
+    - name: Download and extract install directory
+      uses: actions/download-artifact@v4.1.7
+      with:
+        name: install-windows-x64
+        path: install
+
+    - name: Download and extract Mesa3D
+      run: |
+        curl -L -o mesa3d.7z https://github.com/pal1000/mesa-dist-win/releases/download/24.2.5/mesa3d-24.2.5-release-msvc.7z
+        7z x mesa3d.7z -omesa3d
+
+    - name: Run system-wide deployment
+      run: |
+        cd mesa3d
+        .\systemwidedeploy.cmd 1
+      shell: cmd
+
+    - name: Install Visual C++ 2010 Redistributable
+      run: |
+        choco install -y vcredist2010
+        refreshenv
+      shell: cmd
+
+    - name: Run tests
+      run: |
+        cd install
+        call env.bat vc14 win64 release
+        DRAWEXE.exe -v -c testgrid
+      shell: cmd
+      env:
+        CSF_TestScriptsPath: ${{ github.workspace }}/tests
+        CSF_TestDataPath: ${{ github.workspace }}/data
+
+    - name: Upload test results
+      uses: actions/upload-artifact@v4.4.3
+      id: artifact-upload-step
+      with:
+        name: results-windows-x64
+        path: install/results
+        retention-days: 15
+
+  test-windows-clang-x64:
+    name: Test on Windows with Clang (x64)
+    runs-on: windows-2022
+    needs: prepare-and-build-windows-clang-x64
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Set up MSVC
+      uses: ilammy/msvc-dev-cmd@v1.13.0
+      with:
+        arch: x64
+
+    - name: Download and extract 3rdparty dependencies
+      run: |
+          Invoke-WebRequest -Uri https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/3rdparty-vc14-64.zip -OutFile 3rdparty-vc14-64.zip
+          Expand-Archive -Path 3rdparty-vc14-64.zip -DestinationPath .
+          Remove-Item 3rdparty-vc14-64.zip
+      shell: pwsh
+
+    - name: Download and extract test data
+      run: |
+        cd data
+        Invoke-WebRequest -Uri https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/opencascade-dataset-7.8.0.zip -OutFile opencascade-dataset-7.8.0.zip
+        Expand-Archive -Path opencascade-dataset-7.8.0.zip -DestinationPath .
+        Remove-Item opencascade-dataset-7.8.0.zip
+      shell: pwsh
+
+    - name: Download and extract install directory
+      uses: actions/download-artifact@v4.1.7
+      with:
+        name: install-windows-clang-x64
+        path: install
+
+    - name: Download and extract Mesa3D
+      run: |
+        curl -L -o mesa3d.7z https://github.com/pal1000/mesa-dist-win/releases/download/24.2.5/mesa3d-24.2.5-release-msvc.7z
+        7z x mesa3d.7z -omesa3d
+
+    - name: Run system-wide deployment
+      run: |
+        cd mesa3d
+        .\systemwidedeploy.cmd 1
+      shell: cmd
+
+    - name: Install Visual C++ 2010 Redistributable
+      run: |
+        choco install -y vcredist2010
+        refreshenv
+      shell: cmd
+
+    - name: Run tests
+      run: |
+        cd install
+        call env.bat clang win64 release
+        DRAWEXE.exe -v -c testgrid
+      shell: cmd
+      env:
+        CSF_TestScriptsPath: ${{ github.workspace }}/tests
+        CSF_TestDataPath: ${{ github.workspace }}/data
+
+    - name: Upload test results
+      uses: actions/upload-artifact@v4.4.3
+      id: artifact-upload-step
+      with:
+        name: results-windows-clang-x64
+        path: install/results
+        retention-days: 15
+
+  test-macos-x64:
+    name: Test on macOS (x64)
+    runs-on: macos-15
+    needs: prepare-and-build-macos-x64
+
+    steps:
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: |
+        brew update
+        brew install tcl-tk tbb gl2ps xerces-c \
+                     libxmu libxi libxft libxpm \
+                     glew freetype freeimage draco glfw
+
+    - name: Download test data
+      run: |
+        cd data
+        curl -L -O https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/opencascade-dataset-7.8.0.tar.xz
+        tar -xf opencascade-dataset-7.8.0.tar.xz
+
+    - name: Download and extract install directory
+      uses: actions/download-artifact@v4.1.7
+      with:
+        name: install-macos-x64
+        path: install
+
+    - name: Set LIBGL_ALWAYS_SOFTWARE environment variable
+      run: echo "LIBGL_ALWAYS_SOFTWARE=1" >> $GITHUB_ENV
+
+    - name: Set execute permissions on DRAWEXE
+      run: chmod +x install/bin/DRAWEXE
+
+    - name: Run tests
+      run: |
+         cd install
+         cd bin
+         source env.sh
+         ./DRAWEXE -v -c testgrid caf basic
+      shell: bash
+      env:
+        LIBGL_ALWAYS_SOFTWARE: 1
+        CSF_TestScriptsPath: ${{ github.workspace }}/tests
+        CSF_TestDataPath: ${{ github.workspace }}/data
+
+    - name: Upload test results
+      uses: actions/upload-artifact@v4.4.3
+      id: artifact-upload-step
+      with:
+        name: results-macos-x64
+        path: install/bin/results
+        retention-days: 15
+
+  test-macos-gcc-x64:
+    name: Test on macOS with GCC (x64)
+    runs-on: macos-15
+    needs: prepare-and-build-macos-gcc-x64
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: |
+        brew update
+        brew install tcl-tk tbb gl2ps xerces-c \
+                     libxmu libxi libxft libxpm \
+                     glew freetype freeimage draco glfw
+
+    - name: Download test data
+      run: |
+        cd data
+        curl -L -O https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/opencascade-dataset-7.8.0.tar.xz
+        tar -xf opencascade-dataset-7.8.0.tar.xz
+
+    - name: Download and extract install directory
+      uses: actions/download-artifact@v4.1.7
+      with:
+        name: install-macos-gcc-x64
+        path: install
+
+    - name: Set LIBGL_ALWAYS_SOFTWARE environment variable
+      run: echo "LIBGL_ALWAYS_SOFTWARE=1" >> $GITHUB_ENV
+
+    - name: Set execute permissions on DRAWEXE
+      run: chmod +x install/bin/DRAWEXE
+
+    - name: Run tests
+      run: |
+         cd install
+         cd bin
+         source env.sh
+         ./DRAWEXE -v -c testgrid caf basic
+      shell: bash
+      env:
+        LIBGL_ALWAYS_SOFTWARE: 1
+        CSF_TestScriptsPath: ${{ github.workspace }}/tests
+        CSF_TestDataPath: ${{ github.workspace }}/data
+
+    - name: Upload test results
+      uses: actions/upload-artifact@v4.4.3
+      id: artifact-upload-step
+      with:
+        name: results-macos-gcc-x64
+        path: install/bin/results
+        retention-days: 15
+
+  test-linux-clang-x64:
+    name: Test on Linux with Clang (x64)
+    runs-on: ubuntu-24.04
+    needs: prepare-and-build-linux-clang-x64
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: sudo apt-get update && sudo apt-get install -y tcl-dev tk-dev cmake clang make libbtbb-dev libx11-dev libglu1-mesa-dev tcllib tcl-thread tcl libvtk9-dev libopenvr-dev libdraco-dev libfreeimage-dev libegl1-mesa-dev libgles2-mesa-dev libfreetype-dev
+
+    - name: Install Xvfb and Mesa
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y xvfb mesa-utils libgl1-mesa-dri
+
+    - name: Start Xvfb
+      run: Xvfb :99 -screen 0 1920x1080x24 &
+
+    - name: Set DISPLAY environment variable
+      run: echo "DISPLAY=:99" >> $GITHUB_ENV
+
+    - name: Download test data
+      run: |
+        cd data
+        wget https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/opencascade-dataset-7.8.0.tar.xz
+        tar -xf opencascade-dataset-7.8.0.tar.xz
+
+    - name: Download and extract install directory
+      uses: actions/download-artifact@v4.1.7
+      with:
+        name: install-linux-clang-x64
+        path: install
+
+    - name: Set LIBGL_ALWAYS_SOFTWARE environment variable
+      run: echo "LIBGL_ALWAYS_SOFTWARE=1" >> $GITHUB_ENV
+
+    - name: Set execute permissions on DRAWEXE
+      run: chmod +x install/bin/DRAWEXE
+
+    - name: Run tests
+      run: |
+         cd install
+         cd bin
+         source env.sh
+         ./DRAWEXE -v -c testgrid
+      shell: bash
+      env:
+        DISPLAY: :99
+        LIBGL_ALWAYS_SOFTWARE: 1
+        CSF_TestScriptsPath: ${{ github.workspace }}/tests
+        CSF_TestDataPath: ${{ github.workspace }}/data
+
+    - name: Upload test results
+      uses: actions/upload-artifact@v4.4.3
+      id: artifact-upload-step
+      with:
+        name: results-linux-clang-x64
+        path: install/bin/results
+        retention-days: 15
+
+  test-linux-gcc-x64:
+    name: Test on Linux with GCC (x64)
+    runs-on: ubuntu-24.04
+    needs: prepare-and-build-linux-gcc-x64
+
+    steps:
+
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    - name: Install dependencies
+      run: sudo apt-get update && sudo apt-get install -y tcl-dev tk-dev cmake gcc g++ make libbtbb-dev libx11-dev libglu1-mesa-dev tcllib tcl-thread tcl libvtk9-dev libopenvr-dev libdraco-dev libfreeimage-dev libegl1-mesa-dev libgles2-mesa-dev libfreetype-dev
+
+    - name: Install Xvfb and Mesa
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y xvfb mesa-utils libgl1-mesa-dri
+
+    - name: Start Xvfb
+      run: Xvfb :99 -screen 0 1920x1080x24 &
+
+    - name: Set DISPLAY environment variable
+      run: echo "DISPLAY=:99" >> $GITHUB_ENV
+
+    - name: Download test data
+      run: |
+        cd data
+        wget https://github.com/Open-Cascade-SAS/OCCT/releases/download/V7_8_0/opencascade-dataset-7.8.0.tar.xz
+        tar -xf opencascade-dataset-7.8.0.tar.xz
+
+    - name: Download and extract install directory
+      uses: actions/download-artifact@v4.1.7
+      with:
+        name: install-linux-gcc-x64
+        path: install
+
+    - name: Set LIBGL_ALWAYS_SOFTWARE environment variable
+      run: echo "LIBGL_ALWAYS_SOFTWARE=1" >> $GITHUB_ENV
+
+    - name: Set execute permissions on DRAWEXE
+      run: chmod +x install/bin/DRAWEXE
+
+    - name: Run tests
+      run: |
+         cd install
+         cd bin
+         source env.sh
+         ./DRAWEXE -v -c testgrid
+      shell: bash
+      env:
+        DISPLAY: :99
+        LIBGL_ALWAYS_SOFTWARE: 1
+        CSF_TestScriptsPath: ${{ github.workspace }}/tests
+        CSF_TestDataPath: ${{ github.workspace }}/data
+
+    - name: Upload test results
+      uses: actions/upload-artifact@v4.4.3
+      id: artifact-upload-step
+      with:
+        name: results-linux-gcc-x64
+        path: install/bin/results
+        retention-days: 15
+
+  summarize:
+      name: Summarize and Send PR Message
+      runs-on: ubuntu-24.04
+      if: github.event_name == 'pull_request'
+      needs: [test-windows-x64, test-windows-clang-x64, test-macos-x64, test-macos-gcc-x64, test-linux-clang-x64, test-linux-gcc-x64]
+  
+      steps:
+
+      - name: Install dependencies
+        run: sudo apt-get update && sudo apt-get install -y tcl-dev tk-dev cmake gcc g++ make libbtbb-dev libx11-dev libglu1-mesa-dev tcllib tcl-thread tcl libvtk9-dev libopenvr-dev libdraco-dev libfreeimage-dev libegl1-mesa-dev libgles2-mesa-dev libfreetype-dev
+  
+      - name: Install Xvfb and Mesa
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y xvfb mesa-utils libgl1-mesa-dri
+  
+      - name: Start Xvfb
+        run: Xvfb :99 -screen 0 1920x1080x24 &
+  
+      - name: Set DISPLAY environment variable
+        run: echo "DISPLAY=:99" >> $GITHUB_ENV
+
+      - name: Set LIBGL_ALWAYS_SOFTWARE environment variable
+        run: echo "LIBGL_ALWAYS_SOFTWARE=1" >> $GITHUB_ENV
+
+      - name: Download and extract install directory
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: install-linux-gcc-x64
+          path: install
+
+      - name: Set execute permissions on DRAWEXE
+        run: chmod +x install/bin/DRAWEXE
+
+      - name: Get latest workflow run ID from target branch
+        id: get_run_id
+        run: |
+          workflow_name="Build and Test OCCT on Multiple Platforms"
+          target_branch="${{ github.event.pull_request.base.ref }}"
+          echo "Fetching latest run ID for workflow: $workflow_name on branch: $target_branch"
+          response=$(curl -s \
+            -H "Accept: application/vnd.github.v3+json" \
+            "https://api.github.com/repos/${{ github.repository }}/actions/runs?branch=$target_branch")
+          latest_run_id=$(echo "$response" | jq -r --arg workflow_name "$workflow_name" '.workflow_runs[] | select(.name==$workflow_name) | .id' | head -n 1)
+          echo "latest_run_id=$latest_run_id" >> $GITHUB_ENV
+
+      - name: Download all test results (Windows x64) from master
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-windows-x64
+          path: install/bin/results/master/windows-x64
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          run-id: ${{ env.latest_run_id }}
+
+      - name: Download all test results (Windows Clang x64) from master
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-windows-clang-x64
+          path: install/bin/results/master/windows-clang-x64
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          run-id: ${{ env.latest_run_id }}
+
+      - name: Download all test results (macOS x64) from master
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-macos-x64
+          path: install/bin/results/master/macos-x64
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          run-id: ${{ env.latest_run_id }}
+
+      - name: Download all test results (macOS GCC x64) from master
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-macos-gcc-x64
+          path: install/bin/results/master/macos-gcc-x64
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          run-id: ${{ env.latest_run_id }}
+
+      - name: Download all test results (Linux Clang x64) from master
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-linux-clang-x64
+          path: install/bin/results/master/linux-clang-x64
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          run-id: ${{ env.latest_run_id }}
+
+      - name: Download all test results (Linux GCC x64) from master
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-linux-gcc-x64
+          path: install/bin/results/master/linux-gcc-x64
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          run-id: ${{ env.latest_run_id }}
+
+      - name: Download all test results (Windows x64)
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-windows-x64
+          path: install/bin/results/current/windows-x64
+
+      - name: Download all test results (Windows Clang x64)
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-windows-clang-x64
+          path: install/bin/results/current/windows-clang-x64
+
+      - name: Download all test results (macOS x64)
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-macos-x64
+          path: install/bin/results/current/macos-x64
+
+      - name: Download all test results (macOS GCC x64)
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-macos-gcc-x64
+          path: install/bin/results/current/macos-gcc-x64
+
+      - name: Download all test results (Linux Clang x64)
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-linux-clang-x64
+          path: install/bin/results/current/linux-clang-x64
+
+      - name: Download all test results (Linux GCC x64)
+        uses: actions/download-artifact@v4.1.7
+        with:
+          name: results-linux-gcc-x64
+          path: install/bin/results/current/linux-gcc-x64
+
+      - name: Run tests
+        run: |
+          echo "Comparing test results..."
+          cd install
+          cd bin
+          source env.sh
+          for dir in results/current/windows-x64/*; do RESULTS_CURRENT_WINDOWS_X64=$dir; done
+          for dir in results/master/windows-x64/*; do RESULTS_MASTER_WINDOWS_X64=$dir; done
+          for dir in results/current/windows-clang-x64/*; do RESULTS_CURRENT_WINDOWS_CLANG_X64=$dir; done
+          for dir in results/master/windows-clang-x64/*; do RESULTS_MASTER_WINDOWS_CLANG_X64=$dir; done
+          for dir in results/current/macos-x64/*; do RESULTS_CURRENT_MACOS_X64=$dir; done
+          for dir in results/master/macos-x64/*; do RESULTS_MASTER_MACOS_X64=$dir; done
+          for dir in results/current/macos-gcc-x64/*; do RESULTS_CURRENT_MACOS_GCC_X64=$dir; done
+          for dir in results/master/macos-gcc-x64/*; do RESULTS_MASTER_MACOS_GCC_X64=$dir; done
+          for dir in results/current/linux-clang-x64/*; do RESULTS_CURRENT_LINUX_CLANG_X64=$dir; done
+          for dir in results/master/linux-clang-x64/*; do RESULTS_MASTER_LINUX_CLANG_X64=$dir; done
+          for dir in results/current/linux-gcc-x64/*; do RESULTS_CURRENT_LINUX_GCC_X64=$dir; done
+          for dir in results/master/linux-gcc-x64/*; do RESULTS_MASTER_LINUX_GCC_X64=$dir; done
+          ./DRAWEXE -v -c testdiff $RESULTS_CURRENT_WINDOWS_X64 $RESULTS_MASTER_WINDOWS_X64 & 
+          ./DRAWEXE -v -c testdiff $RESULTS_CURRENT_WINDOWS_CLANG_X64 $RESULTS_MASTER_WINDOWS_CLANG_X64 &
+          ./DRAWEXE -v -c testdiff $RESULTS_CURRENT_MACOS_X64 $RESULTS_MASTER_MACOS_X64 &
+          ./DRAWEXE -v -c testdiff $RESULTS_CURRENT_MACOS_GCC_X64 $RESULTS_MASTER_MACOS_GCC_X64 &
+          ./DRAWEXE -v -c testdiff $RESULTS_CURRENT_LINUX_CLANG_X64 $RESULTS_MASTER_LINUX_CLANG_X64 &
+          ./DRAWEXE -v -c testdiff $RESULTS_CURRENT_LINUX_GCC_X64 $RESULTS_MASTER_LINUX_GCC_X64 &
+          wait
+        shell: bash
+        env:
+          DISPLAY: :99
+          LIBGL_ALWAYS_SOFTWARE: 1
+
+      - name: Upload updated test results (Windows x64)
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: results-windows-x64
+          overwrite: true
+          path: install/bin/results/current/windows-x64
+
+      - name: Upload updated test results (Windows Clang x64)
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: results-windows-clang-x64
+          overwrite: true
+          path: install/bin/results/current/windows-clang-x64
+
+      - name: Upload updated test results (macOS x64)
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: results-macos-x64
+          overwrite: true
+          path: install/bin/results/current/macos-x64
+
+      - name: Upload updated test results (macOS GCC x64)
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: results-macos-gcc-x64
+          overwrite: true
+          path: install/bin/results/current/macos-gcc-x64
+
+      - name: Upload updated test results (Linux Clang x64)
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: results-linux-clang-x64
+          overwrite: true
+          path: install/bin/results/current/linux-clang-x64
+
+      - name: Upload updated test results (Linux GCC x64)
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: results-linux-gcc-x64
+          overwrite: true
+          path: install/bin/results/current/linux-gcc-x64
+
+      - name: Upload test compare result logs
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: test-compare-results
+          overwrite: true
+          path: |
+            install/bin/results/current/**/diff-*.html
+            install/bin/results/current/**/diff-*.log
+            install/bin/results/current/**/summary.html
+            install/bin/results/current/**/tests.log

.github/workflows/build-docs.yml

@@ -0,0 +1,45 @@
+# This workflow builds the OCCT reference manual documentation.
+# It is triggered on pushes to the 'master' branch.
+# The workflow includes steps to checkout the repository, install dependencies, build the documentation, and upload the generated documentation and logs as artifacts.
+
+name: Build Documentation
+
+on:
+  push:
+    branches:
+      - 'master'
+
+jobs:
+  build:
+    name: Build Refman Documentation
+    runs-on: windows-2022
+
+    steps:
+    - name: Checkout repository
+      uses: actions/checkout@v4.2.1
+
+    - name: Install dependencies
+      run: |
+        choco install -y graphviz
+        choco install -y doxygen.install
+
+    - name: Build documentation
+      run: |
+        set PATH=%PATH%;C:\Program Files\doxygen\bin;C:\Program Files\Graphviz\bin;C:\Program Files\doxygen
+        bash gendoc -refman
+      shell: cmd
+
+    - name: Upload refman documentation
+      uses: actions/upload-artifact@v4.4.3
+      id: artifact-upload-step
+      with:
+        name: refman-doc
+        path: doc/refman
+        retention-days: 90
+
+    - name: Upload generation log
+      uses: actions/upload-artifact@v4.4.3
+      with:
+        name: doxygen.log
+        path: doc/html_doxygen_err.log
+        retention-days: 90

.github/workflows/code-analysis.yml

@@ -0,0 +1,97 @@
+# This workflow performs code analysis using both CodeQL and Microsoft C++ Code Analysis.
+# It is triggered on pushes to the 'master' branch and publishes warnings into the security GitHub tab.
+# The workflow includes two jobs: one for CodeQL analysis on Ubuntu and another for MSVC Code Analysis on Windows.
+
+name: Code Analysis
+
+on:
+  push:
+    branches:
+      - 'master'
+
+permissions:
+  contents: read
+  security-events: write
+  packages: read
+
+env:
+  # Path to the CMake build directory.
+  build: '${{ github.workspace }}/build'
+  config: 'Debug'
+
+jobs:
+  codeql-analyze:
+    name: CodeQL Analyze (C/C++)
+    runs-on: ubuntu-latest
+
+    steps:
+    # Step: Checkout the repository
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    # Step: Install necessary dependencies for building the project
+    - name: Install dependencies
+      run: sudo apt-get update && sudo apt-get install -y tcl-dev tk-dev cmake gcc g++ make libbtbb-dev libx11-dev libglu1-mesa-dev
+
+    # Step: Initialize CodeQL for scanning
+    - name: Initialize CodeQL
+      uses: github/codeql-action/init@v3.26.5
+      with:
+        languages: c-cpp
+        build-mode: manual
+
+    # Step: Build the project using CMake and Make
+    - name: Build project
+      shell: bash
+      run: |
+        mkdir -p build
+        cd build
+        cmake -G "Unix Makefiles" \
+              -D CMAKE_C_COMPILER=gcc \
+              -D CMAKE_CXX_COMPILER=g++ \
+              -D USE_FREETYPE=OFF \
+              -D CMAKE_BUILD_TYPE=Release ..
+        make -j$(nproc)
+
+    # Step: Perform CodeQL Analysis
+    - name: Perform CodeQL Analysis
+      uses: github/codeql-action/analyze@v3.26.5
+      with:
+        category: "/language:c-cpp"
+
+  msvc-analyze:
+    name: Microsoft C++ Code Analysis
+    runs-on: windows-latest
+
+    steps:
+    # Step: Checkout the repository
+    - name: Checkout repository
+      uses: actions/checkout@v4.1.7
+
+    # Step: Install necessary dependencies using Chocolatey
+    - name: Install dependencies
+      run: |
+          choco install cmake --installargs 'ADD_CMAKE_TO_PATH=System' -y
+          choco install magicsplat-tcl-tk -y
+
+    # Step: Configure the project using CMake
+    - name: Configure CMake
+      run: |
+        mkdir build
+        cd build
+        cmake -D USE_FREETYPE=OFF -DCMAKE_BUILD_TYPE=${{ env.config }} ..
+
+    # Step: Run MSVC Code Analysis
+    - name: Run MSVC Code Analysis
+      uses: microsoft/msvc-code-analysis-action@v0.1.1
+      id: run-analysis
+      with:
+        cmakeBuildDirectory: ${{ env.build }}
+        buildConfiguration: ${{ env.config }}
+        ruleset: NativeRecommendedRules.ruleset
+
+    # Step: Upload SARIF file to GitHub Code Scanning Alerts
+    - name: Upload SARIF to GitHub
+      uses: github/codeql-action/upload-sarif@v3.26.5
+      with:
+        sarif_file: ${{ steps.run-analysis.outputs.sarif }}

.gitignore

@@ -1,6 +1,8 @@
 
 # standard directories for derived files in CASROOT
 /.adm
+/.cache
+/.vscode
 /lin
 /mac
 /wnt

CMakeLists.txt

@@ -1,4 +1,4 @@
-cmake_minimum_required (VERSION 2.8.12 FATAL_ERROR)
+cmake_minimum_required (VERSION 3.10 FATAL_ERROR)
 
 set (CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/adm/cmake")
 
@@ -6,6 +6,26 @@ set (CMAKE_SUPPRESS_REGENERATION TRUE)
 
 set (CMAKE_CONFIGURATION_TYPES Release Debug RelWithDebInfo CACHE INTERNAL "" FORCE)
 
+# set using C++ standard
+set (BUILD_CPP_STANDARD "C++11" CACHE STRING "Select using c++ standard.")
+set_property(CACHE BUILD_CPP_STANDARD PROPERTY STRINGS "C++11" "C++14" "C++17" "C++20" "C++23")
+
+# Set desired C++ standard
+if     ("${BUILD_CPP_STANDARD}" STREQUAL "C++11")
+  set (CMAKE_CXX_STANDARD 11)
+elseif ("${BUILD_CPP_STANDARD}" STREQUAL "C++14")
+  set (CMAKE_CXX_STANDARD 14)
+elseif ("${BUILD_CPP_STANDARD}" STREQUAL "C++17")
+  set (CMAKE_CXX_STANDARD 17)
+elseif ("${BUILD_CPP_STANDARD}" STREQUAL "C++20")
+  set (CMAKE_CXX_STANDARD 20)
+elseif ("${BUILD_CPP_STANDARD}" STREQUAL "C++23")
+  set (CMAKE_CXX_STANDARD 23)
+else ()
+  message (FATAL_ERROR, "misprint in c++ standard name")
+endif()
+set (CMAKE_CXX_STANDARD_REQUIRED ON)
+
 # macro: include patched file if it exists
 macro (OCCT_INCLUDE_CMAKE_FILE BEING_INCLUDED_FILE)
   if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${BEING_INCLUDED_FILE}.cmake")
@@ -15,6 +35,14 @@ macro (OCCT_INCLUDE_CMAKE_FILE BEING_INCLUDED_FILE)
   endif()
 endmacro()
 
+# set using memory manager option for TKernel
+set (USE_MMGR_TYPE "NATIVE" CACHE STRING "Select using memory manager tool.")
+set_property(CACHE USE_MMGR_TYPE PROPERTY STRINGS "NATIVE" "FLEXIBLE" "TBB" "JEMALLOC")
+
+# set profile for C++ compiler and linker
+set (BUILD_OPT_PROFILE "Default" CACHE STRING "Select profile for compiler and linker.")
+set_property(CACHE BUILD_OPT_PROFILE PROPERTY STRINGS "Default" "Production")
+
 # include variable description
 OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/vardescr")
 
@@ -56,6 +84,20 @@ set_property (GLOBAL PROPERTY OCC_VERSION_MAJOR ${OCC_VERSION_MAJOR})
 set_property (GLOBAL PROPERTY OCC_VERSION_MINOR ${OCC_VERSION_MINOR})
 set_property (GLOBAL PROPERTY OCC_VERSION_MAINTENANCE ${OCC_VERSION_MAINTENANCE})
 
+# set soversion variable determining compatibility version on platforms with symlinks
+# 0 - for empty, 1 - for major, 2 - for major.minor, 3 - for major.minor.maintenance
+if (NOT BUILD_SOVERSION_NUMBERS)
+  set (BUILD_SOVERSION_NUMBERS "0" CACHE STRING "${BUILD_SOVERSION_NUMBERS_DESCR}" FORCE)
+  SET_PROPERTY(CACHE BUILD_SOVERSION_NUMBERS PROPERTY STRINGS 0 1 2 3)
+
+  # update default state of soversion on different platforms
+  if (WIN32 OR ANDROID OR EMSCRIPTEN)
+    set (BUILD_SOVERSION_NUMBERS 0)
+  else()
+    set (BUILD_SOVERSION_NUMBERS 2)
+  endif()
+endif()
+
 set (INSTALL_TEST_CASES OFF CACHE BOOL "${INSTALL_TEST_CASES_DESCR}")
 
 # Regeneration of OCCT resource files
@@ -106,24 +148,20 @@ if (NOT DEFINED BUILD_USE_PCH)
   set (BUILD_USE_PCH OFF CACHE BOOL "${BUILD_USE_PCH_DESCR}")
 endif()
 
-if (BUILD_USE_PCH)
+if (CMAKE_VERSION VERSION_LESS "3.16")
+  OCCT_CHECK_AND_UNSET (BUILD_USE_PCH)
+elseif (NOT BUILD_USE_PCH)
+  set (CMAKE_DISABLE_PRECOMPILE_HEADERS ON)
+else ()
+  set (CMAKE_DISABLE_PRECOMPILE_HEADERS OFF)
+endif()
 
-  # Load Cotire tool for accelerating build procedure
-  include(cotire)
-
-  # Set Cotire to ignore lxx, pxx, gxx
-  set (COTIRE_ADDITIONAL_PREFIX_HEADER_IGNORE_EXTENSIONS "lxx;pxx;gxx" CACHE STRING "Set Cotire to ignore OCCT specific files that can be #included" FORCE)
-
-  # Set priority for inclusion of system headers in PCH to reduce problems
-  # due to incomplete inclusion or wrong order.
-  if (WIN32)
-    # on Windows, assume that SDK (windows.h) is in default location
-    set(ProgramFilesX86 "ProgramFiles(x86)")
-    file(TO_CMAKE_PATH "$ENV{${ProgramFilesX86}}" ProgramFilesX86)
-    set_property (DIRECTORY PROPERTY COTIRE_PREFIX_HEADER_INCLUDE_PRIORITY_PATH "${ProgramFilesX86}")
-    unset(ProgramFilesX86)
-  endif()
+if (NOT DEFINED BUILD_INCLUDE_SYMLINK)
+  set (BUILD_INCLUDE_SYMLINK OFF CACHE BOOL "${BUILD_INCLUDE_SYMLINK_DESCR}")
+endif()
 
+if (CMAKE_VERSION VERSION_LESS "3.14")
+  OCCT_CHECK_AND_UNSET (BUILD_INCLUDE_SYMLINK)
 endif()
 
 # copy samples to install directory
@@ -461,12 +499,16 @@ endforeach()
 # accumulate all used toolkits
 list (REMOVE_DUPLICATES BUILD_TOOLKITS)
 set (RAW_BUILD_TOOLKITS)
+set (OCCT_FULL_LIST_OF_INCLUDES)
 foreach (BUILD_TOOLKIT ${BUILD_TOOLKITS})
-  OCCT_TOOLKIT_FULL_DEP (${BUILD_TOOLKIT} TOOLKIT_FULL_DEPS)
+  EXCTRACT_TOOLKIT_FULL_DEPS ("src" ${BUILD_TOOLKIT} TOOLKIT_FULL_DEPS TOOLKIT_INCLUDES)
+  list (APPEND OCCT_FULL_LIST_OF_INCLUDES ${TOOLKIT_INCLUDES})
   list (APPEND RAW_BUILD_TOOLKITS ${BUILD_TOOLKIT} ${TOOLKIT_FULL_DEPS})
 endforeach()
 
 list (REMOVE_DUPLICATES RAW_BUILD_TOOLKITS)
+list (REMOVE_DUPLICATES OCCT_FULL_LIST_OF_INCLUDES)
+
 set (BUILD_TOOLKITS ${RAW_BUILD_TOOLKITS})
 
 # include the patched or original list of definitions and flags
@@ -661,8 +703,10 @@ endif()
 if (CAN_USE_GLES2)
   if (USE_GLES2)
     add_definitions (-DHAVE_GLES2_EXT)
-    OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/egl")
-    OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/gles2")
+    if (NOT IOS)
+      OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/egl")
+      OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/gles2")
+    endif()
   else()
     OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_EGL")
     OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_GLES2")
@@ -798,6 +842,14 @@ else()
   OCCT_CHECK_AND_UNSET ("3RDPARTY_FLEX_EXECUTABLE")
 endif()
 
+# Jemalloc
+if ("${USE_MMGR_TYPE}" STREQUAL "JEMALLOC")
+  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/jemalloc")
+else()
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_JEMALLOC")
+  OCCT_CHECK_AND_UNSET ("INSTALL_JEMALLOC")
+endif()
+
 # qt for inspector and samples
 if (BUILD_Inspector OR BUILD_SAMPLES_QT)
   # check qt 3rdparty path
@@ -823,6 +875,9 @@ if (3RDPARTY_INCLUDE_DIRS)
   include_directories (${3RDPARTY_INCLUDE_DIRS})
 endif()
 
+# Ensure the include directory exists
+file(MAKE_DIRECTORY "${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}")
+
 # include <cmake binary folder>/inc
 include_directories (${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE})
 
@@ -880,7 +935,7 @@ string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
 message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT header files into ${CMAKE_BINARY_DIR}/inc ...")
 
 # collect all the headers to <binary dir>/inc folder
-COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOLKITS}" "${CMAKE_SOURCE_DIR}/src" "${INSTALL_DIR_INCLUDE}")
+COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOLKITS}" "src" "${INSTALL_DIR_INCLUDE}")
 
 string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
 message (STATUS "Info: \(${CURRENT_TIME}\) End the collecting")
@@ -912,7 +967,7 @@ if (BUILD_Inspector)
   # collect all the headers to <binary dir>/inc/inspector folder
   string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
   message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/inc/inspector ...")
-  COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOL_TOOLKITS}" "${CMAKE_SOURCE_DIR}/tools" "${INSTALL_DIR_INCLUDE}/inspector")
+  COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOL_TOOLKITS}" "tools" "${INSTALL_DIR_INCLUDE}/inspector")
 endif()
 
 # OCCT samples
@@ -960,10 +1015,10 @@ if (${DRAWEXE_INDEX} GREATER -1)
   # copy draw script to install script folder
   if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/draw.${SCRIPT_EXT}")
     install (FILES "${BUILD_PATCH}/adm/templates/draw.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
-            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
+            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_EXECUTE WORLD_READ WORLD_EXECUTE)
   else()
     install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/draw.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
-            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
+            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_EXECUTE WORLD_READ WORLD_EXECUTE)
   endif()
 
   # copy draw script to CMake binary folder
@@ -978,13 +1033,14 @@ else()
   set (ADDITIONAL_CUSTOM_CONTENT "\nif [ -e \"\${aScriptPath}/${SUB_CUSTOM_NAME}\" ]; then\n  source \"\${aScriptPath}/${SUB_CUSTOM_NAME}\" \"\$1\" \"\$2\" \nfi")
 endif()
 
- # change custom.bat/sh
-if (EXISTS "${INSTALL_DIR}/${INSTALL_DIR_SCRIPT}/custom.${SCRIPT_EXT}")
+# validating custom.bat/sh for changes
+if (EXISTS "${CMAKE_BINARY_DIR}/custom.${SCRIPT_EXT}" AND EXISTS "${INSTALL_DIR}/${INSTALL_DIR_SCRIPT}/custom.${SCRIPT_EXT}")
   file (READ "${INSTALL_DIR}/${INSTALL_DIR_SCRIPT}/custom.${SCRIPT_EXT}" CUSTOM_CONTENT)
-
-  set (CUSTOM_CONTENT "${CUSTOM_CONTENT} ${ADDITIONAL_CUSTOM_CONTENT}")
-
-  file (WRITE "${INSTALL_DIR}/${INSTALL_DIR_SCRIPT}/custom.${SCRIPT_EXT}" "${CUSTOM_CONTENT}")
+  string(FIND "${CUSTOM_CONTENT}" "${ADDITIONAL_CUSTOM_CONTENT}" pos)
+  if (pos EQUAL -1)
+    set (CUSTOM_CONTENT "${CUSTOM_CONTENT} ${ADDITIONAL_CUSTOM_CONTENT}")
+    OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
+  endif()
 else()
   OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
 endif()
@@ -1124,14 +1180,8 @@ if (BUILD_SAMPLES_MFC)
   add_subdirectory(samples/mfc/standard/mfcsample)
   add_subdirectory(samples/mfc/standard/01_Geometry)
   add_subdirectory(samples/mfc/standard/02_Modeling)
-  add_subdirectory(samples/mfc/standard/03_Viewer2d)
-  add_subdirectory(samples/mfc/standard/04_Viewer3d)
-  add_subdirectory(samples/mfc/standard/05_ImportExport)
-  add_subdirectory(samples/mfc/standard/06_Ocaf)
-  add_subdirectory(samples/mfc/standard/07_Triangulation)
-  add_subdirectory(samples/mfc/standard/08_HLR)
-  add_subdirectory(samples/mfc/standard/09_Animation)
-  add_subdirectory(samples/mfc/standard/10_Convert)
+  add_subdirectory(samples/mfc/standard/03_ImportExport)
+  add_subdirectory(samples/mfc/standard/04_HLR)
 
   message (STATUS "Info: \(${CURRENT_TIME}\) MFC Sample projects added")
 endif()
@@ -1171,10 +1221,10 @@ if (BUILD_TOOL_TOOLKITS)
   # copy tinspector script to install script folder
   if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/inspector.${SCRIPT_EXT}")
     install (FILES "${BUILD_PATCH}/adm/templates/inspector.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
-            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
+            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_EXECUTE WORLD_READ WORLD_EXECUTE)
   else()
     install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/inspector.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
-            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
+            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_EXECUTE WORLD_READ WORLD_EXECUTE)
   endif()
 
   set (OpenCASCADE_BINARY_DIR "${INSTALL_DIR}/${INSTALL_DIR_BIN}")
@@ -1209,7 +1259,7 @@ foreach (OCCT_TOOLKIT ${BUILD_TOOLKITS})
 endforeach()
 list (REMOVE_DUPLICATES OCCT_MODULES_ENABLED)
 list (REMOVE_DUPLICATES OCCT_COMPILE_DEFINITIONS)
-# these macros are defined for specific tookits, not globalwise
+# these macros are defined for specific toolkits, not globalwise
 list (REMOVE_ITEM OCCT_COMPILE_DEFINITIONS HAVE_OPENGL)
 list (REMOVE_ITEM OCCT_COMPILE_DEFINITIONS HAVE_GLES2)
 
@@ -1229,7 +1279,7 @@ foreach (OCCT_CONFIGURATION ${CMAKE_CONFIGURATION_TYPES})
 endforeach()
 # install OpenCASCADE config file with compile definitions and C/C++ flags ONLY for current configuration
 install (CODE "string (TOLOWER \"\${CMAKE_INSTALL_CONFIG_NAME}\" CMAKE_INSTALL_CONFIG_NAME_LOWER)")
-install (CODE "configure_file(\"${CMAKE_BINARY_DIR}/OpenCASCADECompileDefinitionsAndFlags-\${CMAKE_INSTALL_CONFIG_NAME_LOWER}.cmake\" \"${INSTALL_DIR}/${INSTALL_DIR_CMAKE}/OpenCASCADECompileDefinitionsAndFlags-\${CMAKE_INSTALL_CONFIG_NAME_LOWER}.cmake\" COPYONLY)")
+install (CODE "file(INSTALL FILES \"${CMAKE_BINARY_DIR}/OpenCASCADECompileDefinitionsAndFlags-\${CMAKE_INSTALL_CONFIG_NAME_LOWER}.cmake\" DESTINATION \"${INSTALL_DIR}/${INSTALL_DIR_CMAKE}/\" TYPE FILE)")
 
 foreach (OCCT_MODULE ${OCCT_MODULES})
   if (BUILD_MODULE_${OCCT_MODULE})

README.md

@@ -0,0 +1,63 @@
+# Open CASCADE Technology
+
+Open CASCADE Technology (OCCT) is a software development platform providing services for 3D surface and solid modeling, CAD data exchange, and visualization. Most of OCCT functionality is available in the form of C++ libraries. OCCT is ideal for developing software dealing with 3D modeling (CAD), manufacturing/measuring (CAM), or numerical simulation (CAE).
+
+## License
+
+Open CASCADE Technology is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation, with a special exception defined in the file `OCCT_LGPL_EXCEPTION.txt`. Consult the file `LICENSE_LGPL_21.txt` included in the OCCT distribution for the complete text of the license.
+
+Alternatively, Open CASCADE Technology may be used under the terms of the Open CASCADE commercial license or a contractual agreement.
+
+**Note:** Open CASCADE Technology is provided on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND. The entire risk related to any use of the OCCT code and materials is on you. See the license text for a formal disclaimer.
+
+## Packaging
+
+You can receive certified versions of OCCT code in different packages:
+
+- **Snapshot of Git repository:** Contains C++ header and source files of OCCT, documentation sources, build scripts, and CMake project files.
+- **Complete source archive:** Contains all sources of OCCT, generated HTML and PDF documentation, and ready-to-use projects for building on all officially supported platforms.
+- **Binary package (platform-specific):** In addition to the complete source archive, it includes binaries of OCCT and third-party libraries built on one platform. This package allows using OCCT immediately after installation.
+
+Certified versions of OCCT can be downloaded from:
+- [Open CASCADE Releases](https://dev.opencascade.org/release)
+- [GitHub Releases](https://github.com/Open-Cascade-SAS/OCCT/releases)
+
+You can also find OCCT pre-installed on your system or install it from packages provided by a third party. Note that packaging and functionality of such versions can be different from certified releases. Please consult the documentation accompanying your version for details.
+
+## Documentation
+
+Documentation is available at the following links:
+- [Latest version](https://dev.opencascade.org/doc/overview)
+- [Version 7.7](https://dev.opencascade.org/doc/occt-7.7.0/overview)
+
+Documentation can be part of the package. To preview documentation as part of the package, open the file `doc/html/index.html` to browse HTML documentation.
+
+If HTML documentation is not available in your package, you can:
+
+- **Generate it from sources:** You need to have Tcl and Doxygen 1.8.4 (or above) installed on your system and accessible in your environment (check the environment variable PATH). Use the batch file `gendoc.bat` on Windows or the Bash script `gendoc` on Linux or OS X to (re)generate documentation.
+- **Read documentation in source plain text (Markdown) format** found in the subfolder `dox`.
+
+See `dox/dev_guides/documentation/documentation.md` or [Building Documentation](https://dev.opencascade.org/doc/occt-7.7.0/overview/html/build_upgrade__building_documentation.html) for details.
+
+## Building
+
+In most cases, you need to rebuild OCCT on your platform (OS, compiler) before using it in your project to ensure binary compatibility.
+
+Consult the file `dox/dev_guides/building/building.md` or [Building OCCT](https://dev.opencascade.org/doc/overview/html/build_upgrade__building_occt.html) for instructions on building OCCT from sources on supported platforms.
+
+## Version
+
+The current version of OCCT can be found in the file `src/Standard/Standard_Version.hxx`.
+
+## Development
+
+### Bug Tracker
+- [GitHub Issues](https://github.com/Open-Cascade-SAS/OCCT/issues)
+- [OCCT Tracker](https://tracker.dev.opencascade.org/)
+
+For information regarding OCCT code development, please consult the official OCCT Collaborative Development Portal:
+- [OCCT Development Portal](http://dev.opencascade.org)
+
+### Forum and Discussions
+- [OCCT Forums](https://dev.opencascade.org/forums)
+- [GitHub Discussions](https://github.com/Open-Cascade-SAS/OCCT/discussions)

README.txt

@@ -1,89 +0,0 @@
-Open CASCADE Technology
-=======================
-
-This directory contains sources of Open CASCADE Technology (OCCT), a software
-development platform providing services for 3D surface and solid modeling, CAD 
-data exchange, and visualization. Most of OCCT functionality is available in 
-the form of C++ libraries. OCCT can be best applied in development of software 
-dealing with 3D modeling (CAD), manufacturing / measuring (CAM) or numerical 
-simulation (CAE).
-
-License
--------
-
-Open CASCADE Technology is free software; you can redistribute it and / or 
-modify it under the terms of the GNU Lesser General Public version 2.1 as 
-published by the Free Software Foundation, with special exception defined in 
-the file OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included
-in OCCT distribution for complete text of the license.
-
-Alternatively, Open CASCADE Technology may be used under the terms of Open 
-CASCADE commercial license or contractual agreement.
-
-Note that Open CASCADE Technology is provided on an "AS IS" basis, WITHOUT 
-WARRANTY OF ANY KIND. The entire risk related to any use of the OCCT code and 
-materials is on you. See the license text for formal disclaimer.
-
-Packaging
----------
-
-You can receive certified version of OCCT code in different packages.
-
-- Snapshot of Git repository: contains C++ header and source files of OCCT,
-  documentation sources, build scripts, and CMake project files.
-
-- Complete source archive: contains all sources of OCCT, generated HTML and PDF
-  documentation, and ready-to-use projects for building on all officially 
-  supported platforms.
-
-- Binary package (platform-specific): in addition to complete source archive, 
-  it includes binaries of OCCT and third-party libraries built on one platform. 
-  This package allows using OCCT immediately after installation.
-
-Certified versions of OCCT can be downloaded from http://www.opencascade.com
-
-You can also find OCCT pre-installed on your system, or install it from 
-packages provided by a third party. Note that packaging and functionality
-of such versions can be different from certified releases. Please consult 
-documentation accompanying your version for details.
-
-Documentation
--------------
-
-Open file doc/html/index.html to browse HTML documentation.
-
-If HTML documentation is not available in your package, you can:
-
-- Generate it from sources. 
-
-  You need to have Tcl and Doxygen 1.8.4 (or above) installed on your system.
-  and accessible in your environment (check environment variable PATH).
-  Use batch file *gendoc.bat* on Windows or Bash script *gendoc* on Linux
-  or OS X to (re)generate documentation.
-
-- Read documentation in source plain text (MarkDown) format found in 
-  subfolder *dox*
-
-See *dox/dev_guides/documentation/documentation.md* for details.
-
-Building
---------
-
-In most cases you need to rebuild OCCT on your platform (OS, compiler) before
-using it in your project, to ensure binary compatibility.
-
-Consult the file *dox/dev_guides/building/building.md* for instructions on
-building OCCT from sources on supported platforms.
-
-Version
--------
-
-The current version of OCCT can be consulted in the file
-*src/Standard/Standard_Version.hxx*
-
-Development
------------
-
-For information regarding OCCT code development please consult the official 
-OCCT Collaborative Development Portal:
-http://dev.opencascade.org

adm/.gitignore

@@ -1 +0,0 @@
-/build-*

adm/CMPLRS

@@ -1,18 +0,0 @@
-wnt WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)
-lin WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)
-
-wnt cmplrs_cxx f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_cxx b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_cxx Aspect (wnt cmplrs_cxx b) -D_AFXDLL
-wnt cmplrs_cxx (wnt cmplrs_cxx b) -D_AFXDLL -D_AFXDLL
-
-wnt cmplrs_c f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_c b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_c NIS (wnt cmplrs_c b) -DSILGL -DSILGL_VRS=50
-
-lin cmplrs_cxx f -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-lin cmplrs_cxx b -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-
-lin cmplrs_c f -D_GNU_SOURCE=1 -fexceptions
-lin cmplrs_c b -D_GNU_SOURCE=1 -fexceptions
-

adm/MODULES

@@ -3,5 +3,6 @@ ModelingData TKG2d TKG3d TKGeomBase TKBRep
 ModelingAlgorithms TKGeomAlgo TKTopAlgo TKPrim TKBO TKBool TKHLR TKFillet TKOffset TKFeat TKMesh TKXMesh TKShHealing
 Visualization TKService TKV3d TKOpenGl TKOpenGles TKMeshVS TKIVtk TKD3DHost
 ApplicationFramework TKCDF TKLCAF TKCAF TKBinL TKXmlL TKBin TKXml TKStdL TKStd TKTObj TKBinTObj TKXmlTObj TKVCAF
-DataExchange TKXSBase TKSTEPBase TKSTEPAttr TKSTEP209 TKSTEP TKIGES TKXCAF TKXDEIGES TKXDESTEP TKSTL TKVRML TKXmlXCAF TKBinXCAF TKRWMesh
-Draw TKDraw TKTopTest TKOpenGlTest TKOpenGlesTest TKD3DHostTest TKViewerTest TKXSDRAW TKDCAF TKXDEDRAW TKTObjDRAW TKQADraw TKIVtkDraw DRAWEXE
+DataExchange TKDE TKXSBase TKDESTEP TKDEIGES TKDESTL TKDEVRML TKDECascade TKDEOBJ TKDEGLTF TKDEPLY TKXCAF TKXmlXCAF TKBinXCAF TKRWMesh
+DETools TKExpress ExpToCasExe
+Draw TKDraw TKTopTest TKOpenGlTest TKOpenGlesTest TKD3DHostTest TKViewerTest TKXSDRAW TKDCAF TKXDEDRAW TKTObjDRAW TKQADraw TKIVtkDraw DRAWEXE TKXSDRAWDE TKXSDRAWGLTF TKXSDRAWIGES TKXSDRAWOBJ TKXSDRAWPLY TKXSDRAWSTEP TKXSDRAWSTL TKXSDRAWVRML

adm/UDLIST

@@ -32,6 +32,7 @@ n UnitsAPI
 n gp
 n math
 r OS
+n FlexLexer
 t TKMath
 t TKernel
 n Adaptor2d
@@ -376,16 +377,13 @@ r SHMessage
 r XSMessage
 r XSTEPResource
 t TKBinXCAF
-t TKIGES
-t TKSTEP
-t TKSTEP209
-t TKSTEPAttr
-t TKSTEPBase
-t TKSTL
-t TKVRML
+t TKDESTL
+t TKDEVRML
 t TKXCAF
-t TKXDEIGES
-t TKXDESTEP
+t TKDE
+t TKDECascade
+t TKDEIGES
+t TKDESTEP
 t TKXSBase
 t TKXmlXCAF
 n BOPTest
@@ -394,6 +392,9 @@ n DBRep
 n DDF
 n DDataStd
 n DDocStd
+n DE
+n DEXCAFCascade
+n DEBRepCascade
 n DNaming
 n DPrsStd
 n Draw
@@ -414,7 +415,12 @@ n XDEDRAW
 n XSDRAW
 n XSDRAWIGES
 n XSDRAWSTEP
-n XSDRAWSTLVRML
+n XSDRAWSTL
+n XSDRAWVRML
+n XSDRAWDE
+n XSDRAWGLTF
+n XSDRAWOBJ
+n XSDRAWPLY
 r DrawResources
 t TKDCAF
 t TKDraw
@@ -426,6 +432,14 @@ t TKD3DHostTest
 t TKViewerTest
 t TKXDEDRAW
 t TKXSDRAW
+t TKXSDRAWIGES
+t TKXSDRAWSTEP
+t TKXSDRAWSTL
+t TKXSDRAWVRML
+t TKXSDRAWDE
+t TKXSDRAWGLTF
+t TKXSDRAWOBJ
+t TKXSDRAWPLY
 x DRAWEXE
 n QADraw
 n QANCollection
@@ -451,9 +465,13 @@ t TKVCAF
 n XCAFView
 n XCAFNoteObjects
 t TKRWMesh
+t TKDEGLTF
+t TKDEOBJ
+t TKDEPLY
 n RWGltf
 n RWMesh
 n RWObj
+n RWPly
 n DFBrowser
 n DFBrowserPane
 n DFBrowserPaneXDE
@@ -474,3 +492,6 @@ n TreeModel
 n View
 n ViewControl
 n VInspector
+n Express
+t TKExpress
+x ExpToCasExe

adm/cmake/3rdparty_macro.cmake

@@ -19,7 +19,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
   # include occt macros. compiler_bitness, os_wiht_bit, compiler
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
 
-  # specify product folder in connectin with 3RDPARTY_DIR
+  # specify product folder in connection with 3RDPARTY_DIR
   if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
     #CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_DIR 3RDPARTY_${PRODUCT_NAME}_DIR PATH "The directory containing ${PRODUCT_NAME}")
 
@@ -101,8 +101,9 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
                                                       CMAKE_FIND_ROOT_PATH_BOTH
                                                       NO_DEFAULT_PATH)
     else()
+      string(TOLOWER ${PRODUCT_NAME} LOW_CASE_PRODUCT_NAME)
       find_path (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR NAMES ${HEADER_NAME}
-                                                      PATH_SUFFIXES include inc headers
+                                                      PATH_SUFFIXES include inc headers ${LOW_CASE_PRODUCT_NAME}
                                                       CMAKE_FIND_ROOT_PATH_BOTH)
     endif()
   endif()
@@ -363,3 +364,25 @@ macro (COMPLIANCE_PRODUCT_CONSISTENCY LIBNAME)
     endif()
   endif()
 endmacro()
+
+macro(CONFIGURE_DRACO_DEPS)
+  if (USE_DRACO)
+    set (USED_LIB_RELEASE ${3RDPARTY_DRACO_LIBRARY})
+    if (WIN32)
+      set (USED_LIB_DEBUG ${3RDPARTY_DRACO_LIBRARY_DEBUG})
+    else()
+      set (USED_LIB_DEBUG ${3RDPARTY_DRACO_LIBRARY})
+    endif()
+    set (USED_LIB_CONF)
+    if (EXISTS ${USED_LIB_DEBUG})
+      set (USED_LIB_CONF "$<$<CONFIG:DEBUG>:${USED_LIB_DEBUG}>;${USED_LIB_CONF}")
+    endif()
+    if (EXISTS ${USED_LIB_RELEASE})
+      set (USED_LIB_CONF "$<$<CONFIG:RELEASE>:${USED_LIB_RELEASE}>;${USED_LIB_CONF}")
+      set (USED_LIB_CONF "$<$<CONFIG:RELWITHDEBINFO>:${USED_LIB_RELEASE}>;${USED_LIB_CONF}")
+    endif()
+    if (DEFINED USED_LIB_CONF)
+      set_property (TARGET ${PROJECT_NAME} APPEND PROPERTY LINK_LIBRARIES "${USED_LIB_CONF}")
+    endif()
+  endif()
+endmacro()

adm/cmake/bison.cmake

@@ -12,7 +12,7 @@ if (NOT BISON_EXECUTABLE OR NOT EXISTS "${BISON_EXECUTABLE}")
 endif()
 
 # Add paths to 3rdparty subfolders containing name "bison" to CMAKE_PROGRAM_PATH variable to make
-# these paths searhed by find_package
+# these paths searched by find_package
 if (3RDPARTY_DIR)
   file (GLOB BISON_PATHS LIST_DIRECTORIES true "${3RDPARTY_DIR}/*bison*/")
   foreach (candidate_path ${BISON_PATHS})
@@ -22,6 +22,4 @@ if (3RDPARTY_DIR)
   endforeach()
 endif()
  
-# bison 3.2 is required because it provides options to avoid generation of redundant header
-# files and embedding of local paths in the generated code
-find_package (BISON 3.2)
+find_package (BISON 3.7.4)

adm/cmake/draco.cmake

@@ -1,4 +1,98 @@
 # Draco - a library for a lossy vertex data compression, used as extension to glTF format.
 # https://github.com/google/draco
 
-THIRDPARTY_PRODUCT("DRACO" "draco/compression/decode.h" "CSF_Draco" "")
+OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
+
+if (NOT DEFINED 3RDPARTY_DRACO_DIR)
+  set (3RDPARTY_DRACO_DIR "" CACHE PATH "The directory containing Draco")
+endif()
+
+if (NOT DEFINED 3RDPARTY_DRACO_INCLUDE_DIR)
+  set (3RDPARTY_DRACO_INCLUDE_DIR  "" CACHE PATH "The directory containing headers of the Draco")
+endif()
+
+if (NOT DEFINED 3RDPARTY_DRACO_LIBRARY)
+  set (3RDPARTY_DRACO_LIBRARY "" CACHE FILEPATH "Draco library")
+endif()
+
+if (NOT DEFINED 3RDPARTY_DRACO_LIBRARY_DIR)
+  set (3RDPARTY_DRACO_LIBRARY_DIR "" CACHE PATH "The directory containing Draco library")
+endif()
+
+if (WIN32)
+  if (NOT DEFINED 3RDPARTY_DRACO_LIBRARY_DEBUG)
+    set (3RDPARTY_DRACO_LIBRARY_DEBUG "" CACHE FILEPATH "Draco debug library")
+  endif()
+  
+  if (NOT DEFINED 3RDPARTY_DRACO_LIBRARY_DIR_DEBUG)
+    set (3RDPARTY_DRACO_LIBRARY_DIR_DEBUG "" CACHE PATH "The directory containing Draco debug library")
+  endif()
+endif()
+
+if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
+  if (NOT 3RDPARTY_DRACO_DIR OR NOT EXISTS "${3RDPARTY_DRACO_DIR}")
+    FIND_PRODUCT_DIR("${3RDPARTY_DIR}" draco DRACO_DIR_NAME)
+    if (DRACO_DIR_NAME)
+      set (3RDPARTY_DRACO_DIR "${3RDPARTY_DIR}/${DRACO_DIR_NAME}" CACHE PATH "The directory containing Draco" FORCE)
+    endif()
+  endif()
+endif()
+
+# header
+if (NOT 3RDPARTY_DRACO_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_DRACO_INCLUDE_DIR}")
+  set (HEADER_NAMES draco)
+
+  # set 3RDPARTY_DRACO_INCLUDE_DIR as notfound, otherwise find_path can't assign a new value to 3RDPARTY_DRACO_INCLUDE_DIR
+  set (3RDPARTY_DRACO_INCLUDE_DIR "3RDPARTY_DRACO_INCLUDE_DIR-NOTFOUND" CACHE FILEPATH "The directory containing headers of the Draco" FORCE)
+
+  if (3RDPARTY_DRACO_DIR AND EXISTS "${3RDPARTY_DRACO_DIR}")
+    find_path (3RDPARTY_DRACO_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                                 PATHS ${3RDPARTY_DRACO_DIR}
+                                                 PATH_SUFFIXES "include"
+                                                 CMAKE_FIND_ROOT_PATH_BOTH
+                                                 NO_DEFAULT_PATH)
+  else()
+    find_path (3RDPARTY_DRACO_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                                 PATHS ${3RDPARTY_DRACO_DIR}
+                                                 PATH_SUFFIXES "include"
+                                                 CMAKE_FIND_ROOT_PATH_BOTH)
+  endif()
+endif()
+
+if (3RDPARTY_DRACO_INCLUDE_DIR AND EXISTS "${3RDPARTY_DRACO_INCLUDE_DIR}")
+  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_DRACO_INCLUDE_DIR}")
+else()
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_DRACO_INCLUDE_DIR)
+endif()
+
+if (3RDPARTY_DRACO_DIR AND EXISTS "${3RDPARTY_DRACO_DIR}")
+  if (NOT 3RDPARTY_DRACO_LIBRARY OR NOT EXISTS "${3RDPARTY_DRACO_LIBRARY}")
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .a)
+    set (3RDPARTY_DRACO_LIBRARY "3RDPARTY_DRACO_LIBRARY-NOTFOUND" CACHE FILEPATH "The path to Draco library" FORCE)
+
+    find_library (3RDPARTY_DRACO_LIBRARY NAMES ${CSF_Draco}
+                                         PATHS "${3RDPARTY_DRACO_DIR}"
+                                         PATH_SUFFIXES lib
+                                         CMAKE_FIND_ROOT_PATH_BOTH
+                                         NO_DEFAULT_PATH)
+    if (3RDPARTY_DRACO_LIBRARY AND EXISTS "${3RDPARTY_DRACO_LIBRARY}")
+      get_filename_component (3RDPARTY_DRACO_LIBRARY_DIR "${3RDPARTY_DRACO_LIBRARY}" PATH)
+      set (3RDPARTY_DRACO_LIBRARY_DIR "${3RDPARTY_DRACO_LIBRARY_DIR}" CACHE FILEPATH "The directory containing Draco library" FORCE)
+    endif()
+  endif()
+
+  if (WIN32 AND (NOT 3RDPARTY_DRACO_LIBRARY_DEBUG OR NOT EXISTS "${3RDPARTY_DRACO_LIBRARY_DEBUG}"))
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .a)
+    set (3RDPARTY_DRACO_LIBRARY_DEBUG "3RDPARTY_DRACO_LIBRARY_DEBUG-NOTFOUND" CACHE FILEPATH "The path to debug Draco library" FORCE)
+
+    find_library (3RDPARTY_DRACO_LIBRARY_DEBUG NAMES ${CSF_Draco}
+                                         PATHS "${3RDPARTY_DRACO_DIR}"
+                                         PATH_SUFFIXES libd
+                                         CMAKE_FIND_ROOT_PATH_BOTH
+                                         NO_DEFAULT_PATH)
+    if (3RDPARTY_DRACO_LIBRARY_DEBUG AND EXISTS "${3RDPARTY_DRACO_LIBRARY_DEBUG}")
+      get_filename_component (3RDPARTY_DRACO_LIBRARY_DIR_DEBUG "${3RDPARTY_DRACO_LIBRARY_DEBUG}" PATH)
+      set (3RDPARTY_DRACO_LIBRARY_DIR_DEBUG "${3RDPARTY_DRACO_LIBRARY_DIR_DEBUG}" CACHE FILEPATH "The directory containing debug Draco library" FORCE)
+    endif()
+  endif()
+endif()

adm/cmake/flex.cmake

@@ -15,7 +15,7 @@ if (NOT FLEX_INCLUDE_DIR OR NOT EXISTS "${FLEX_INCLUDE_DIR}")
 endif()
 
 # Add paths to 3rdparty subfolders containing name "flex" to CMAKE_PROGRAM_PATH and 
-# CMAKE_INCLUDE_PATH variables to make these paths searhed by find_package
+# CMAKE_INCLUDE_PATH variables to make these paths searched by find_package
 if (3RDPARTY_DIR)
   file (GLOB FLEX_PATHS LIST_DIRECTORIES true "${3RDPARTY_DIR}/*flex*")
   foreach (candidate_path ${FLEX_PATHS})
@@ -26,10 +26,18 @@ if (3RDPARTY_DIR)
   endforeach()
 endif()
  
-# flex 2.5.37 is required because closest known lower version, 2.5.3 from WOK 6.8.0,
-# generates code which is unusable on Windows (includes unistd.h without any way to avoid this)
-find_package (FLEX 2.5.37)
+find_package (FLEX 2.6.4)
 
 if (NOT FLEX_FOUND OR NOT FLEX_INCLUDE_DIR OR NOT EXISTS "${FLEX_INCLUDE_DIR}/FlexLexer.h")
   list (APPEND 3RDPARTY_NOT_INCLUDED FLEX_INCLUDE_DIR)
 endif()
+
+# remove old general version of FlexLexer
+if (EXISTS ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/FlexLexer/FlexLexer.h)
+  message (STATUS "Info: remove old FLEX header file: ${CMAKE_SOURCE_DIR}/src/FlexLexer/FlexLexer.h")
+  file(REMOVE ${CMAKE_SOURCE_DIR}/src/FlexLexer/FlexLexer.h)
+endif()
+# install copy of FlexLexer.h locally to allow further building without flex
+if (FLEX_INCLUDE_DIR AND EXISTS "${FLEX_INCLUDE_DIR}/FlexLexer.h")
+  configure_file("${FLEX_INCLUDE_DIR}/FlexLexer.h" "${CMAKE_SOURCE_DIR}/src/FlexLexer/FlexLexer.h" @ONLY NEWLINE_STYLE LF)
+endif()

adm/cmake/freetype.cmake

@@ -14,7 +14,7 @@ OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
 OCCT_MAKE_COMPILER_SHORT_NAME()
 OCCT_MAKE_COMPILER_BITNESS()
 
-# specify freetype folder in connectin with 3RDPARTY_DIR
+# specify freetype folder in connection with 3RDPARTY_DIR
 if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
   #CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_DIR 3RDPARTY_FREETYPE_DIR PATH "The directory containing freetype")
 
@@ -110,8 +110,19 @@ if (IS_BUILTIN_SEARCH_REQUIRED)
     set (ENV{FREETYPE_DIR} "${3RDPARTY_FREETYPE_DIR}")
   endif()
 
+  unset (FREETYPE_LIBRARY_RELEASE)
   find_package(Freetype)
 
+  # Only for UNIX (not APPLE)
+  if ((NOT WIN32) AND (NOT APPLE))
+    # To avoid linker error on Ubuntu 18.04 and others linux distributives we should
+    # link with freetype library, compiled as Position Independent Code (PIC),
+    # for example, with shared object.
+    if ((DEFINED FREETYPE_LIBRARY_RELEASE) AND (NOT "${FREETYPE_LIBRARY_RELEASE}" STREQUAL "") AND (EXISTS "${FREETYPE_LIBRARY_RELEASE}"))
+      string (REPLACE "\.a" "\.so" FREETYPE_LIBRARY_RELEASE "${FREETYPE_LIBRARY_RELEASE}")
+    endif()
+  endif()
+
   # restore ENV{FREETYPE_DIR}
   if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
     set (ENV{FREETYPE_DIR} ${CACHED_FREETYPE_DIR})
@@ -122,7 +133,7 @@ if (IS_BUILTIN_SEARCH_REQUIRED)
     CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_ft2build FILEPATH "The directory containing ft2build.h header")
     CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_freetype2 FILEPATH "The directory containing ftheader.h header")
     if (BUILD_SHARED_LIBS)
-      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_LIBRARY FILEPATH "freetype library")
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_LIBRARY_RELEASE FILEPATH "freetype library")
     endif()
   endif()
 
@@ -141,8 +152,8 @@ if (IS_BUILTIN_SEARCH_REQUIRED)
 
   if (BUILD_SHARED_LIBS)
     if (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
-      if (FREETYPE_LIBRARY AND EXISTS "${FREETYPE_LIBRARY}")
-        set (3RDPARTY_FREETYPE_LIBRARY  "${FREETYPE_LIBRARY}" CACHE FILEPATH "The path to freetype library" FORCE)
+      if (FREETYPE_LIBRARY_RELEASE AND EXISTS "${FREETYPE_LIBRARY_RELEASE}")
+        set (3RDPARTY_FREETYPE_LIBRARY  "${FREETYPE_LIBRARY_RELEASE}" CACHE FILEPATH "The path to freetype library" FORCE)
       endif()
     endif()
 
@@ -220,7 +231,7 @@ endif()
 # freetype library
 #if (BUILD_SHARED_LIBS)
   if (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
-    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib)
 
     set (FREETYPE_PATH_SUFFIXES lib)
     if (ANDROID)
@@ -242,6 +253,16 @@ endif()
                                               CMAKE_FIND_ROOT_PATH_BOTH)
     endif()
 
+    # Only for UNIX (not APPLE)
+    if ((NOT WIN32) AND (NOT APPLE))
+      # To avoid linker error on Ubuntu 18.04 and some others linux distributives we should
+      # link with freetype library, compiled as Position Independent Code (PIC),
+      # for example, with shared object.
+      if ((DEFINED 3RDPARTY_FREETYPE_LIBRARY) AND (NOT "${3RDPARTY_FREETYPE_LIBRARY}" STREQUAL "") AND (EXISTS "${3RDPARTY_FREETYPE_LIBRARY}"))
+        string (REPLACE "\.a" "\.so" 3RDPARTY_FREETYPE_LIBRARY "${3RDPARTY_FREETYPE_LIBRARY}")
+      endif()
+    endif()
+
     if (3RDPARTY_FREETYPE_LIBRARY AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
       get_filename_component (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY}" PATH)
       set (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY_DIR}" CACHE PATH "The directory containing freetype library" FORCE)
@@ -350,7 +371,7 @@ endif()
 # unset all redundant variables
 OCCT_CHECK_AND_UNSET(FREETYPE_INCLUDE_DIR_ft2build)
 OCCT_CHECK_AND_UNSET(FREETYPE_INCLUDE_DIR_freetype2)
-OCCT_CHECK_AND_UNSET(FREETYPE_LIBRARY)
+OCCT_CHECK_AND_UNSET(FREETYPE_LIBRARY_RELEASE)
 
 if (BUILD_SHARED_LIBS)
   mark_as_advanced (3RDPARTY_FREETYPE_LIBRARY 3RDPARTY_FREETYPE_DLL)

adm/cmake/jemalloc.cmake

@@ -0,0 +1,155 @@
+# JeMalloc
+
+macro (JEMALLOC_LIB_SEARCH MMGR_LIB PREFIX)
+  if (NOT 3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB})
+    set (JEMALLOC_PATH_SUFFIXES "lib" "bin")
+    set (3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB} "3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB}-NOTFOUND")
+    if (3RDPARTY_JEMALLOC_DIR AND EXISTS "${3RDPARTY_JEMALLOC_DIR}")
+      find_library (3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB} NAMES ${MMGR_LIB}
+                    PATHS "${3RDPARTY_JEMALLOC_LIBRARY_DIR}" "${3RDPARTY_JEMALLOC_DIR}"
+                    PATH_SUFFIXES ${JEMALLOC_PATH_SUFFIXES}
+                    CMAKE_FIND_ROOT_PATH_BOTH
+                    NO_DEFAULT_PATH)
+    else()
+      find_library (3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB} NAMES ${MMGR_LIB}
+                    PATH_SUFFIXES ${JEMALLOC_PATH_SUFFIXES}
+                    CMAKE_FIND_ROOT_PATH_BOTH)
+    endif()
+    if (3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB})
+      get_filename_component (3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB} "${3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB}}" PATH)
+      set (3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB} "${3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB}}")
+    else()
+      set (3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB} "")
+    endif()
+  endif()
+  if (3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB})
+    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB}}")
+    set (3RDPARTY_JEMALLOC_LIBRARY_DIR "${3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB}}" CACHE PATH "The directory containing JEMALLOC libraries" FORCE)
+  elseif("${PREFIX}" STREQUAL "SHARED")
+    return()
+  else()
+    message(STATUS "Cannot find ${MMGR_LIB} library in jemalloc 3rdparty")
+    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB})
+    set (3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB} "")
+  endif()
+  set (JEMALLOC_IS_STATIC_LIB FALSE)
+  if (((${3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB}} MATCHES "\.lib$")) OR ((${3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB}} MATCHES "\.a$")))
+    get_filename_component(STATIC_LIB_NAME ${3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB}} NAME)
+    list(APPEND CSF_MMGR "${STATIC_LIB_NAME}")
+    set (JEMALLOC_IS_STATIC_LIB TRUE)
+  endif()
+  # install instructions
+  if (INSTALL_JEMALLOC AND NOT JEMALLOC_IS_STATIC_LIB)
+    OCCT_MAKE_OS_WITH_BITNESS()
+    OCCT_MAKE_COMPILER_SHORT_NAME()
+    get_filename_component(3RDPARTY_JEMALLOC_LIBRARY ${3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB}} REALPATH)
+    if (SINGLE_GENERATOR)
+      install (FILES "${3RDPARTY_JEMALLOC_LIBRARY}"
+               DESTINATION "${INSTALL_DIR}/${INSTALL_DIR_LIB}")
+    else()
+        install (FILES "${3RDPARTY_JEMALLOC_LIBRARY}"
+               CONFIGURATIONS Debug
+               DESTINATION "${JEMALLOC_INSTALL_DESTINATION}d")
+        install (FILES "${3RDPARTY_JEMALLOC_LIBRARY}"
+                 CONFIGURATIONS Release
+                 DESTINATION "${JEMALLOC_INSTALL_DESTINATION}")
+        install (FILES "${3RDPARTY_JEMALLOC_LIBRARY}"
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${JEMALLOC_INSTALL_DESTINATION}i")
+    endif()
+    set (USED_3RDPARTY_JEMALLOC_DIR "")
+  elseif(NOT JEMALLOC_IS_STATIC_LIB)
+    # the library directory for using by the executable
+    set (USED_3RDPARTY_JEMALLOC_DIR ${3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB}})
+  endif()
+  unset(3RDPARTY_JEMALLOC_LIBRARY_DIR_${MMGR_LIB} CACHE)
+  unset(3RDPARTY_JEMALLOC_LIBRARY_${PREFIX}_${MMGR_LIB} CACHE)
+endmacro()
+
+macro (SEARCH_JEMALLOC)
+  # find static jemalloc lib
+  SET(CMAKE_FIND_LIBRARY_SUFFIXES ".lib" ".a")
+  if (WIN32)
+    JEMALLOC_LIB_SEARCH ("jemalloc" "STATIC")
+  elseif(NOT WIN32)
+    JEMALLOC_LIB_SEARCH ("jemalloc_pic" "STATIC")
+    SET(CMAKE_FIND_LIBRARY_SUFFIXES "" "so")
+    JEMALLOC_LIB_SEARCH ("jemalloc.so.2" "SHARED")
+  endif()
+  
+  # find shared jemalloc lib
+  SET(CMAKE_FIND_LIBRARY_SUFFIXES ".dll" ".so")
+  JEMALLOC_LIB_SEARCH ("jemalloc" "SHARED")
+endmacro()
+
+# Reset CSF variable
+set (CSF_MMGR "")
+
+if (NOT DEFINED INSTALL_JEMALLOC)
+  set (INSTALL_JEMALLOC OFF CACHE BOOL "${INSTALL_INSTALL_JEMALLOC_DESCR}")
+endif()
+
+# include occt macros. compiler_bitness, os_with_bit, compiler
+OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
+
+# specify JEMALLOC folder in connection with 3RDPARTY_DIR
+if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
+  if (NOT 3RDPARTY_JEMALLOC_DIR OR NOT EXISTS "${3RDPARTY_JEMALLOC_DIR}")
+    FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" jemalloc JEMALLOC_DIR_NAME)
+    if (JEMALLOC_DIR_NAME)
+      set (3RDPARTY_JEMALLOC_DIR "${3RDPARTY_DIR}/${JEMALLOC_DIR_NAME}" CACHE PATH "The directory containing JEMALLOC" FORCE)
+      set (3RDPARTY_JEMALLOC_DIR "${3RDPARTY_DIR}/${JEMALLOC_DIR_NAME}")
+      message(STATUS "Info: JEMALLOC detected in ${3RDPARTY_JEMALLOC_DIR}")
+    endif()
+  endif()
+  else()
+endif()
+
+# define required JEMALLOC variables
+if (NOT DEFINED 3RDPARTY_JEMALLOC_INCLUDE_DIR)
+  set (3RDPARTY_JEMALLOC_INCLUDE_DIR  "" CACHE PATH "the path of headers directory")
+endif()
+
+# check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_${PRODUCT_NAME}_DIR
+if (3RDPARTY_JEMALLOC_DIR AND EXISTS "${3RDPARTY_JEMALLOC_DIR}")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_JEMALLOC_DIR 3RDPARTY_JEMALLOC_INCLUDE_DIR PATH "the path to JEMALLOC")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_JEMALLOC_DIR 3RDPARTY_JEMALLOC_LIBRARY_DIR FILEPATH "The directory containing JEMALLOC libraries")
+endif()
+
+# header
+if (NOT 3RDPARTY_JEMALLOC_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_JEMALLOC_INCLUDE_DIR}")
+  set (HEADER_NAMES jemalloc.h)
+  
+  # set 3RDPARTY_JEMALLOC_INCLUDE_DIR as notfound, otherwise find_library can't assign a new value to 3RDPARTY_JEMALLOC_INCLUDE_DIR
+  set (3RDPARTY_JEMALLOC_INCLUDE_DIR "3RDPARTY_JEMALLOC_INCLUDE_DIR-NOTFOUND" CACHE FILEPATH "the path to header directory" FORCE)
+  
+  if (3RDPARTY_JEMALLOC_DIR AND EXISTS "${3RDPARTY_JEMALLOC_DIR}")
+    find_path (3RDPARTY_JEMALLOC_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                               PATHS ${3RDPARTY_JEMALLOC_DIR}
+                                               PATH_SUFFIXES include/jemalloc
+                                               CMAKE_FIND_ROOT_PATH_BOTH
+                                               NO_DEFAULT_PATH)
+  else()
+    find_path (3RDPARTY_JEMALLOC_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                               PATHS ${3RDPARTY_JEMALLOC_DIR}
+                                               PATH_SUFFIXES include/jemalloc
+                                               CMAKE_FIND_ROOT_PATH_BOTH)
+  endif()
+endif()
+
+if (3RDPARTY_JEMALLOC_INCLUDE_DIR AND EXISTS "${3RDPARTY_JEMALLOC_INCLUDE_DIR}")
+  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_JEMALLOC_INCLUDE_DIR}")
+else()
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_JEMALLOC_INCLUDE_DIR)
+  set (3RDPARTY_JEMALLOC_INCLUDE_DIR "" CACHE FILEPATH "the path to jemalloc.h" FORCE)
+endif()
+
+# Installing destination path
+if (WIN32)
+  set (JEMALLOC_INSTALL_DESTINATION "${INSTALL_DIR}/${INSTALL_DIR_BIN}")
+else()
+  set (JEMALLOC_INSTALL_DESTINATION "${INSTALL_DIR}/${INSTALL_DIR_LIB}")
+endif()
+
+# find static jemalloc lib
+SEARCH_JEMALLOC()

adm/cmake/occt_defs_flags.cmake

@@ -25,10 +25,19 @@ if (NOT CMAKE_SIZEOF_VOID_P EQUAL 8)
 endif()
 
 if (MSVC)
+  # suppress C26812 on VS2019/C++20 (prefer 'enum class' over 'enum')
+  set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /fp:precise /wd\"26812\"")
+  # suppress warning on using portable non-secure functions in favor of non-portable secure ones
   add_definitions (-D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE)
 else()
-  set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fexceptions -fPIC")
-  set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   -fexceptions -fPIC")
+  set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fexceptions")
+  set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   -fexceptions")
+  if (NOT CMAKE_CXX_SIMULATE_ID STREQUAL "MSVC")
+    set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fPIC")
+    set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   -fPIC")
+  else()
+   add_definitions (-D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE)
+  endif()
   add_definitions(-DOCC_CONVERT_SIGNALS)
 endif()
 
@@ -41,9 +50,25 @@ elseif (MSVC)
 endif()
 
 if (MSVC)
-  # string pooling (GF), function-level linking (Gy)
-  set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /GF /Gy")
-  set (CMAKE_C_FLAGS_RELEASE   "${CMAKE_C_FLAGS_RELEASE}   /GF /Gy")
+  if ("${BUILD_OPT_PROFILE}" STREQUAL "Production")
+    # string pooling (GF), function-level linking (Gy)
+    set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /GF /Gy")
+    set (CMAKE_C_FLAGS_RELEASE   "${CMAKE_C_FLAGS_RELEASE}   /GF /Gy")
+
+    # Favor fast code (Ot), Omit frame pointers (Oy)
+    set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /Ot /Oy")
+    set (CMAKE_C_FLAGS_RELEASE   "${CMAKE_C_FLAGS_RELEASE}   /Ot /Oy")
+
+    # Whole Program Optimisation (GL), Enable intrinsic functions (Oi)
+    set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /GL /Oi")
+    set (CMAKE_C_FLAGS_RELEASE   "${CMAKE_C_FLAGS_RELEASE}   /GL /Oi")
+
+    # Link-Time Code Generation(LTCG) is requared for Whole Program Optimisation(GL)
+    set(CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} /LTCG")
+    set(CMAKE_SHARED_LINKER_FLAGS_RELEASE "${CMAKE_SHARED_LINKER_FLAGS_RELEASE} /LTCG")
+    set(CMAKE_STATIC_LINKER_FLAGS_RELEASE "${CMAKE_STATIC_LINKER_FLAGS_RELEASE} /LTCG")
+    set(CMAKE_MODULE_LINKER_FLAGS_RELEASE "${CMAKE_MODULE_LINKER_FLAGS_RELEASE} /LTCG")
+  endif()
   if (BUILD_FORCE_RelWithDebInfo)
     # generate debug info (Zi), inline expansion level (Ob1)
     set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /Zi /Ob1")
@@ -113,8 +138,27 @@ if (MSVC)
   else()
     set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")
   endif()
-elseif (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+elseif (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX OR (CMAKE_CXX_COMPILER_ID MATCHES "[Cc][Ll][Aa][Nn][Gg]"))
   set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wextra")
+
+  if ("${BUILD_OPT_PROFILE}" STREQUAL "Production")
+    # /Ot (favor speed over size) is similar to -O2 or -O3 in GCC/Clang.
+    # /Oy (omit frame pointers) is similar to -fomit-frame-pointer in GCC/Clang.
+    # /GL (whole program optimization) is similar to -flto (Link Time Optimization) in GCC/Clang.
+    # /GF (eliminate duplicate strings) doesn't have a direct equivalent in GCC/Clang, but the compilers do string pooling automatically.
+    # /Gy (enable function-level linking) is similar to -ffunction-sections in GCC/Clang.
+    set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -O3 -fomit-frame-pointer -flto -ffunction-sections")
+    set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -O3 -fomit-frame-pointer -flto -ffunction-sections")
+
+    # Link-Time Code Generation(LTCG) is requared for Whole Program Optimisation(GL)
+    set(CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} -flto")
+    set(CMAKE_SHARED_LINKER_FLAGS_RELEASE "${CMAKE_SHARED_LINKER_FLAGS_RELEASE} -flto -Wl,--gc-sections")
+    set(CMAKE_STATIC_LINKER_FLAGS_RELEASE "${CMAKE_STATIC_LINKER_FLAGS_RELEASE} -flto -Wl,--gc-sections")
+    set(CMAKE_MODULE_LINKER_FLAGS_RELEASE "${CMAKE_MODULE_LINKER_FLAGS_RELEASE} -flto -Wl,--gc-sections")
+  endif()
+  if (CMAKE_CXX_COMPILER_ID MATCHES "[Cc][Ll][Aa][Nn][Gg]")
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wshorten-64-to-32")
+  endif()
   if (BUILD_SHARED_LIBS)
     if (APPLE)
       set (CMAKE_SHARED_LINKER_FLAGS "-lm ${CMAKE_SHARED_LINKER_FLAGS}")
@@ -124,32 +168,22 @@ elseif (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMP
   endif()
 endif()
 
-if ("x${CMAKE_CXX_COMPILER_ID}" STREQUAL "xClang")
+if (CMAKE_CXX_COMPILER_ID MATCHES "[Cc][Ll][Aa][Nn][Gg]")
   if (APPLE)
     # CLang can be used with both libstdc++ and libc++, however on OS X libstdc++ is outdated.
-    set (CMAKE_CXX_FLAGS "-std=c++0x -stdlib=libc++ ${CMAKE_CXX_FLAGS}")
-  elseif(NOT WIN32)
-    # CLang for Windows (at least CLang 8.0 distributed with VS 2019)
-    # does not support option "-std=c++0x"
-    set (CMAKE_CXX_FLAGS "-std=c++0x ${CMAKE_CXX_FLAGS}")
+    set (CMAKE_CXX_FLAGS "-stdlib=libc++ ${CMAKE_CXX_FLAGS}")
   endif()
   # Optimize size of binaries
-  set (CMAKE_SHARED_LINKER_FLAGS "-Wl,-s ${CMAKE_SHARED_LINKER_FLAGS}")
-elseif(MINGW)
+  set (CMAKE_SHARED_LINKER_FLAGS_RELEASE "-Wl,-s ${CMAKE_SHARED_LINKER_FLAGS_RELEASE}")
+endif()
+if(MINGW)
   add_definitions(-D_WIN32_WINNT=0x0601)
   # _WIN32_WINNT=0x0601 (use Windows 7 SDK)
   #set (CMAKE_SYSTEM_VERSION "6.1")
   # workaround bugs in mingw with vtable export
   set (CMAKE_SHARED_LINKER_FLAGS "-Wl,--export-all-symbols")
-
-  # Require C++11
-  set (CMAKE_CXX_FLAGS "-std=gnu++0x ${CMAKE_CXX_FLAGS}")
-  # Optimize size of binaries
-  set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -s")
-  set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -s")
-elseif (DEFINED CMAKE_COMPILER_IS_GNUCXX)
-  # Require C++11
-  set (CMAKE_CXX_FLAGS "-std=c++0x ${CMAKE_CXX_FLAGS}")
+endif()
+if (DEFINED CMAKE_COMPILER_IS_GNUCXX)
   # Optimize size of binaries
   set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -s")
   set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -s")

adm/cmake/occt_macros.cmake

@@ -32,6 +32,27 @@ macro (OCCT_CHECK_AND_UNSET_INSTALL_DIR_SUBDIRS)
   OCCT_CHECK_AND_UNSET (INSTALL_DIR_DOC)
 endmacro()
 
+function (FILE_TO_LIST FILE_NAME FILE_CONTENT)
+  set (LOCAL_FILE_CONTENT)
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${FILE_NAME}")
+    file (STRINGS "${BUILD_PATCH}/${FILE_NAME}" LOCAL_FILE_CONTENT)
+  elseif (EXISTS "${CMAKE_SOURCE_DIR}/${FILE_NAME}")
+    file (STRINGS "${CMAKE_SOURCE_DIR}/${FILE_NAME}" LOCAL_FILE_CONTENT)
+  endif()
+
+  set (${FILE_CONTENT} ${LOCAL_FILE_CONTENT} PARENT_SCOPE)
+endfunction()
+
+function(FIND_FOLDER_OR_FILE FILE_OR_FOLDER_NAME RESULT_PATH)
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${FILE_OR_FOLDER_NAME}")
+    set (${RESULT_PATH} "${BUILD_PATCH}/${FILE_OR_FOLDER_NAME}" PARENT_SCOPE)
+  elseif (EXISTS "${CMAKE_SOURCE_DIR}/${FILE_OR_FOLDER_NAME}")
+    set (${RESULT_PATH} "${CMAKE_SOURCE_DIR}/${FILE_OR_FOLDER_NAME}" PARENT_SCOPE)
+  else()
+    set (${RESULT_PATH} "" PARENT_SCOPE)
+  endif()
+endfunction()
+
 # COMPILER_BITNESS variable
 macro (OCCT_MAKE_COMPILER_BITNESS)
   math (EXPR COMPILER_BITNESS "32 + 32*(${CMAKE_SIZEOF_VOID_P}/8)")
@@ -80,9 +101,9 @@ macro (OCCT_MAKE_COMPILER_SHORT_NAME)
     set (COMPILER gcc)
   elseif (DEFINED CMAKE_COMPILER_IS_GNUCXX)
     set (COMPILER gxx)
-  elseif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+  elseif (CMAKE_CXX_COMPILER_ID MATCHES "[Cc][Ll][Aa][Nn][Gg]")
     set (COMPILER clang)
-  elseif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Intel")
+  elseif (CMAKE_CXX_COMPILER_ID MATCHES "[Ii][Nn][Tt][Ee][Ll]")
     set (COMPILER icc)
   else()
     set (COMPILER ${CMAKE_GENERATOR})
@@ -152,6 +173,17 @@ function (OCCT_ORIGIN_AND_PATCHED_FILES RELATIVE_PATH SEARCH_TEMPLATE RESULT)
   set (${RESULT} ${FOUND_FILES} PARENT_SCOPE)
 endfunction()
 
+function (FILLUP_PRODUCT_SEARCH_TEMPLATE PRODUCT_NAME COMPILER COMPILER_BITNESS SEARCH_TEMPLATES)
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*${COMPILER}.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[a-zA-Z]*[0-9]*-${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*")
+  set (SEARCH_TEMPLATES ${SEARCH_TEMPLATES} PARENT_SCOPE)
+endfunction()
+
 function (FIND_PRODUCT_DIR ROOT_DIR PRODUCT_NAME RESULT)
   OCCT_MAKE_COMPILER_SHORT_NAME()
   OCCT_MAKE_COMPILER_BITNESS()
@@ -160,14 +192,14 @@ function (FIND_PRODUCT_DIR ROOT_DIR PRODUCT_NAME RESULT)
   if ("${lower_PRODUCT_NAME}" STREQUAL "egl")
     string (SUBSTRING "${lower_PRODUCT_NAME}" 1 -1 lower_PRODUCT_NAME)
     list (APPEND SEARCH_TEMPLATES "[^gl]+${lower_PRODUCT_NAME}.*")
+  elseif ("${lower_PRODUCT_NAME}" STREQUAL "tbb")
+    list (APPEND SEARCH_TEMPLATES "^.*${lower_PRODUCT_NAME}.*")
   else()
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*${COMPILER}.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[a-zA-Z]*[0-9]*-${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*")
+    FILLUP_PRODUCT_SEARCH_TEMPLATE(${lower_PRODUCT_NAME} ${COMPILER} ${COMPILER_BITNESS} SEARCH_TEMPLATES)
+    if (WIN32 AND "${COMPILER}" STREQUAL "clang")
+      # for clang on Windows, search for "vc" as well
+      FILLUP_PRODUCT_SEARCH_TEMPLATE(${lower_PRODUCT_NAME} "vc" ${COMPILER_BITNESS} SEARCH_TEMPLATES)
+    endif()
   endif()
 
   SUBDIRECTORY_NAMES ("${ROOT_DIR}" SUBDIR_NAME_LIST)
@@ -223,7 +255,150 @@ macro (OCCT_CONFIGURE_AND_INSTALL BEING_CONGIRUGED_FILE BUILD_NAME INSTALL_NAME
   install(FILES "${OCCT_BINARY_DIR}/${BUILD_NAME}" DESTINATION  "${DESTINATION_PATH}" RENAME ${INSTALL_NAME})
 endmacro()
 
-macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOOLKITS OCCT_COLLECT_SOURCE_DIR OCCT_INSTALL_DIR_PREFIX)
+function (EXTRACT_TOOLKIT_PACKAGES RELATIVE_PATH OCCT_TOOLKIT RESULT_PACKAGES)
+  set (OCCT_TOOLKIT_PACKAGES "")
+  get_property(OCCT_TOOLKIT_PACKAGES GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_PACKAGES)
+  if (OCCT_TOOLKIT_PACKAGES)
+    set (${RESULT_PACKAGES} ${OCCT_TOOLKIT_PACKAGES} PARENT_SCOPE)
+    return()
+  endif()
+  FILE_TO_LIST ("${RELATIVE_PATH}/${OCCT_TOOLKIT}/PACKAGES" OCCT_TOOLKIT_PACKAGES)
+  set (${RESULT_PACKAGES} ${OCCT_TOOLKIT_PACKAGES} PARENT_SCOPE)
+  set_property(GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_PACKAGES "${OCCT_TOOLKIT_PACKAGES}")
+endfunction()
+
+function(EXTRACT_TOOLKIT_EXTERNLIB RELATIVE_PATH OCCT_TOOLKIT RESULT_LIBS)
+  set (OCCT_TOOLKIT_LIBS "")
+  get_property(OCCT_TOOLKIT_LIBS GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_LIBS)
+  if (OCCT_TOOLKIT_LIBS)
+    set (${RESULT_LIBS} ${OCCT_TOOLKIT_LIBS} PARENT_SCOPE)
+    return()
+  endif()
+  FILE_TO_LIST ("${RELATIVE_PATH}/${OCCT_TOOLKIT}/EXTERNLIB" OCCT_TOOLKIT_LIBS)
+  set (${RESULT_LIBS} ${OCCT_TOOLKIT_LIBS} PARENT_SCOPE)
+  set_property(GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_LIBS "${OCCT_TOOLKIT_LIBS}")
+endfunction()
+
+function (EXTRACT_PACKAGE_FILES RELATIVE_PATH OCCT_PACKAGE RESULT_FILES RESULT_INCLUDE_FOLDER)
+  # package name is not unique, it can be reuse in tools and src,
+  # use extra parameter as relative path to distinguish between them
+  set (OCCT_PACKAGE_FILES "")
+  get_property(OCCT_PACKAGE_FILES GLOBAL PROPERTY OCCT_PACKAGE_${RELATIVE_PATH}_${OCCT_PACKAGE}_FILES)
+  get_property(OCCT_PACKAGE_INCLUDE_DIR GLOBAL PROPERTY OCCT_PACKAGE_${RELATIVE_PATH}_${OCCT_PACKAGE}_INCLUDE_DIR)
+  if (OCCT_PACKAGE_FILES)
+    set (${RESULT_FILES} ${OCCT_PACKAGE_FILES} PARENT_SCOPE)
+    set (${RESULT_INCLUDE_FOLDER} ${OCCT_PACKAGE_INCLUDE_DIR} PARENT_SCOPE)
+    return()
+  endif()
+
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_PATH}/${OCCT_PACKAGE}/FILES")
+    file (STRINGS "${BUILD_PATCH}/${RELATIVE_PATH}/${OCCT_PACKAGE}/FILES" OCCT_PACKAGE_FILES)
+    set (OCCT_PACKAGE_INCLUDE_DIR "${BUILD_PATCH}/${RELATIVE_PATH}/${OCCT_PACKAGE}")
+  elseif (EXISTS "${CMAKE_SOURCE_DIR}/${RELATIVE_PATH}/${OCCT_PACKAGE}/FILES")
+    file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_PATH}/${OCCT_PACKAGE}/FILES" OCCT_PACKAGE_FILES)
+    set (OCCT_PACKAGE_INCLUDE_DIR "${CMAKE_SOURCE_DIR}/${RELATIVE_PATH}/${OCCT_PACKAGE}")
+  endif()
+
+  # collect and searach for the files in the package directory or patached one
+  # FILE contains inly filename that must to be inside package or patched directory
+  set (FILE_PATH_LIST)
+
+  foreach (OCCT_FILE ${OCCT_PACKAGE_FILES})
+    string (REGEX REPLACE "[^:]+:+" "" OCCT_FILE "${OCCT_FILE}")
+    FIND_FOLDER_OR_FILE ("${RELATIVE_PATH}/${OCCT_PACKAGE}/${OCCT_FILE}" CUSTOM_FILE_PATH)
+    if (CUSTOM_FILE_PATH)
+      list (APPEND FILE_PATH_LIST "${CUSTOM_FILE_PATH}")
+    endif()
+  endforeach()
+
+  if (NOT FILE_PATH_LIST)
+    if(BUILD_PATH)
+      message (WARNING "FILES has not been found in ${BUILD_PATCH}/${RELATIVE_PATH}/${OCCT_PACKAGE}")
+    else()
+      message (WARNING "FILES has not been found in ${CMAKE_SOURCE_DIR}/${RELATIVE_PATH}/${OCCT_PACKAGE}")
+    endif()
+  endif()
+
+  set (${RESULT_FILES} ${FILE_PATH_LIST} PARENT_SCOPE)
+  set (${RESULT_INCLUDE_FOLDER} ${OCCT_PACKAGE_INCLUDE_DIR} PARENT_SCOPE)
+  set_property(GLOBAL PROPERTY OCCT_PACKAGE_${RELATIVE_PATH}_${OCCT_PACKAGE}_FILES "${FILE_PATH_LIST}")
+  set_property(GLOBAL PROPERTY OCCT_PACKAGE_${RELATIVE_PATH}_${OCCT_PACKAGE}_INCLUDE_DIR "${OCCT_PACKAGE_INCLUDE_DIR}")
+endfunction()
+
+function(EXCTRACT_TOOLKIT_DEPS RELATIVE_PATH OCCT_TOOLKIT RESULT_TKS_AS_DEPS RESULT_INCLUDE_FOLDERS)
+  set (OCCT_TOOLKIT_DEPS "")
+  set (OCCT_TOOLKIT_INCLUDE_FOLDERS "")
+  get_property(OCCT_TOOLKIT_DEPS GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_DEPS)
+  get_property(OCCT_TOOLKIT_INCLUDE_FOLDERS GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_INCLUDE_FOLDERS)
+  if (OCCT_TOOLKIT_DEPS)
+    set (${RESULT_TKS_AS_DEPS} ${OCCT_TOOLKIT_DEPS} PARENT_SCOPE)
+    set (${RESULT_INCLUDE_FOLDERS} ${OCCT_TOOLKIT_INCLUDE_FOLDERS} PARENT_SCOPE)
+    return()
+  endif()
+  set (EXTERNAL_LIBS)
+  EXTRACT_TOOLKIT_EXTERNLIB (${RELATIVE_PATH} ${OCCT_TOOLKIT} EXTERNAL_LIBS)
+  foreach (EXTERNAL_LIB ${EXTERNAL_LIBS})
+    string (REGEX MATCH "^TK" TK_FOUND ${EXTERNAL_LIB})
+    if (TK_FOUND)
+      list (APPEND OCCT_TOOLKIT_DEPS ${EXTERNAL_LIB})
+    endif()
+  endforeach()
+
+  set (OCCT_TOOLKIT_PACKAGES)
+  EXTRACT_TOOLKIT_PACKAGES (${RELATIVE_PATH} ${OCCT_TOOLKIT} OCCT_TOOLKIT_PACKAGES)
+  foreach(OCCT_PACKAGE ${OCCT_TOOLKIT_PACKAGES})
+    EXTRACT_PACKAGE_FILES (${RELATIVE_PATH} ${OCCT_PACKAGE} OCCT_PACKAGE_FILES OCCT_PACKAGE_INCLUDE_DIR)
+    list (APPEND OCCT_TOOLKIT_INCLUDE_FOLDERS ${OCCT_PACKAGE_INCLUDE_DIR})
+  endforeach()
+
+  set (${RESULT_TKS_AS_DEPS} ${OCCT_TOOLKIT_DEPS} PARENT_SCOPE)
+  set (${RESULT_INCLUDE_FOLDERS} ${OCCT_TOOLKIT_INCLUDE_FOLDERS} PARENT_SCOPE)
+  set_property(GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_DEPS "${OCCT_TOOLKIT_DEPS}")
+  set_property(GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_INCLUDE_FOLDERS "${OCCT_TOOLKIT_INCLUDE_FOLDERS}")
+endfunction()
+
+function(EXCTRACT_TOOLKIT_FULL_DEPS RELATIVE_PATH OCCT_TOOLKIT RESULT_TKS_AS_DEPS RESULT_INCLUDE_FOLDERS)
+  set (OCCT_TOOLKIT_DEPS "")
+  set (OCCT_TOOLKIT_INCLUDE_FOLDERS "")
+  get_property(OCCT_TOOLKIT_DEPS GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_FULL_DEPS)
+  get_property(OCCT_TOOLKIT_INCLUDE_FOLDERS GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_FULL_INCLUDE_FOLDERS)
+  if (OCCT_TOOLKIT_DEPS)
+    set (${RESULT_TKS_AS_DEPS} ${OCCT_TOOLKIT_DEPS} PARENT_SCOPE)
+    set (${RESULT_INCLUDE_FOLDERS} ${OCCT_TOOLKIT_INCLUDE_FOLDERS} PARENT_SCOPE)
+    return()
+  endif()
+
+  EXCTRACT_TOOLKIT_DEPS(${RELATIVE_PATH} ${OCCT_TOOLKIT} OCCT_TOOLKIT_DEPS OCCT_TOOLKIT_INCLUDE_DIR)
+  list(APPEND OCCT_TOOLKIT_FULL_DEPS ${OCCT_TOOLKIT_DEPS})
+  list(APPEND OCCT_TOOLKIT_INCLUDE_FOLDERS ${OCCT_TOOLKIT_INCLUDE_DIR})
+
+  foreach(DEP ${OCCT_TOOLKIT_DEPS})
+    EXCTRACT_TOOLKIT_FULL_DEPS(${RELATIVE_PATH} ${DEP} DEP_TOOLKIT_DEPS DEP_INCLUDE_DIRS)
+    list(APPEND OCCT_TOOLKIT_FULL_DEPS ${DEP_TOOLKIT_DEPS})
+    list(APPEND OCCT_TOOLKIT_INCLUDE_FOLDERS ${DEP_INCLUDE_DIRS})
+  endforeach()
+
+  list(REMOVE_DUPLICATES OCCT_TOOLKIT_FULL_DEPS)
+  list(REMOVE_DUPLICATES OCCT_TOOLKIT_INCLUDE_FOLDERS)
+
+  set (${RESULT_TKS_AS_DEPS} ${OCCT_TOOLKIT_FULL_DEPS} PARENT_SCOPE)
+  set (${RESULT_INCLUDE_FOLDERS} ${OCCT_TOOLKIT_INCLUDE_FOLDERS} PARENT_SCOPE)
+  set_property(GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_FULL_DEPS "${OCCT_TOOLKIT_FULL_DEPS}")
+  set_property(GLOBAL PROPERTY OCCT_TOOLKIT_${OCCT_TOOLKIT}_FULL_INCLUDE_FOLDERS "${OCCT_TOOLKIT_INCLUDE_FOLDERS}")
+endfunction()
+
+function (FILE_TO_LIST FILE_NAME FILE_CONTENT)
+  set (LOCAL_FILE_CONTENT)
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${FILE_NAME}")
+    file (STRINGS "${BUILD_PATCH}/${FILE_NAME}" LOCAL_FILE_CONTENT)
+  elseif (EXISTS "${CMAKE_SOURCE_DIR}/${FILE_NAME}")
+    file (STRINGS "${CMAKE_SOURCE_DIR}/${FILE_NAME}" LOCAL_FILE_CONTENT)
+  endif()
+
+  set (${FILE_CONTENT} ${LOCAL_FILE_CONTENT} PARENT_SCOPE)
+endfunction()
+
+function (COLLECT_AND_INSTALL_OCCT_HEADER_FILES THE_ROOT_TARGET_OCCT_DIR THE_OCCT_BUILD_TOOLKITS THE_RELATIVE_PATH THE_OCCT_INSTALL_DIR_PREFIX)
   set (OCCT_USED_PACKAGES)
 
   # consider patched header.in template
@@ -232,145 +407,65 @@ macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOO
     set (TEMPLATE_HEADER_PATH "${BUILD_PATCH}/adm/templates/header.in")
   endif()
 
-  set (ROOT_OCCT_DIR ${CMAKE_SOURCE_DIR})
-
-  foreach (OCCT_USED_TOOLKIT ${OCCT_BUILD_TOOLKITS})
-    # append all required package folders
-    set (OCCT_TOOLKIT_PACKAGES)
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_USED_TOOLKIT}/PACKAGES")
-      file (STRINGS "${BUILD_PATCH}/src/${OCCT_USED_TOOLKIT}/PACKAGES" OCCT_TOOLKIT_PACKAGES)
-    elseif (EXISTS "${OCCT_COLLECT_SOURCE_DIR}/${OCCT_USED_TOOLKIT}/PACKAGES")
-      file (STRINGS "${OCCT_COLLECT_SOURCE_DIR}/${OCCT_USED_TOOLKIT}/PACKAGES" OCCT_TOOLKIT_PACKAGES)
-    endif()
-
-    list (APPEND OCCT_USED_PACKAGES ${OCCT_TOOLKIT_PACKAGES})
-  endforeach()
-
-  list (REMOVE_DUPLICATES OCCT_USED_PACKAGES)
-
   set (OCCT_HEADER_FILES_COMPLETE)
-  set (OCCT_HEADER_FILE_NAMES_NOT_IN_FILES)
-  set (OCCT_HEADER_FILE_WITH_PROPER_NAMES)
-
-  string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-  message (STATUS "Info: \(${CURRENT_TIME}\) Compare FILES with files in package directories...")
-
-  foreach (OCCT_PACKAGE ${OCCT_USED_PACKAGES})
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES")
-      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" OCCT_ALL_FILE_NAMES)
-    elseif (EXISTS "${OCCT_COLLECT_SOURCE_DIR}/${OCCT_PACKAGE}/FILES")
-      file (STRINGS "${OCCT_COLLECT_SOURCE_DIR}/${OCCT_PACKAGE}/FILES" OCCT_ALL_FILE_NAMES)
-    else()
-      message (WARNING "FILES has not been found in ${OCCT_COLLECT_SOURCE_DIR}/${OCCT_PACKAGE}")
-      continue()
-    endif()
-
-    list (LENGTH OCCT_ALL_FILE_NAMES ALL_FILES_NB)
-    math (EXPR ALL_FILES_NB "${ALL_FILES_NB} - 1" )
-
-    # emit warnings if there are unprocessed headers
-    file (GLOB OCCT_ALL_FILES_IN_DIR "${OCCT_COLLECT_SOURCE_DIR}/${OCCT_PACKAGE}/*.*")
-    file (GLOB OCCT_ALL_FILES_IN_PATCH_DIR "${BUILD_PATCH}/src/${OCCT_PACKAGE}/*.*")
-
-    # use patched header files
-    foreach (OCCT_FILE_IN_PATCH_DIR ${OCCT_ALL_FILES_IN_PATCH_DIR})
-      get_filename_component (OCCT_FILE_IN_PATCH_DIR_NAME ${OCCT_FILE_IN_PATCH_DIR} NAME)
-      list (REMOVE_ITEM OCCT_ALL_FILES_IN_DIR "${OCCT_COLLECT_SOURCE_DIR}/${OCCT_PACKAGE}/${OCCT_FILE_IN_PATCH_DIR_NAME}")
-      list (APPEND OCCT_ALL_FILES_IN_DIR "${OCCT_FILE_IN_PATCH_DIR}")
-    endforeach()
-
-    foreach (OCCT_FILE_IN_DIR ${OCCT_ALL_FILES_IN_DIR})
-      get_filename_component (OCCT_FILE_IN_DIR_NAME ${OCCT_FILE_IN_DIR} NAME)
-
-      set (OCCT_FILE_IN_DIR_STATUS OFF)
-
-      if (${ALL_FILES_NB} LESS 0)
-        break()
-      endif()
-
-      foreach (FILE_INDEX RANGE ${ALL_FILES_NB})
-        list (GET OCCT_ALL_FILE_NAMES ${FILE_INDEX} OCCT_FILE_NAME)
-
-        string (REGEX REPLACE "[^:]+:+" "" OCCT_FILE_NAME "${OCCT_FILE_NAME}")
-
-        if ("${OCCT_FILE_IN_DIR_NAME}" STREQUAL "${OCCT_FILE_NAME}")
-          set (OCCT_FILE_IN_DIR_STATUS ON)
-
-          string (REGEX MATCH ".+\\.[hlg]xx|.+\\.h$" IS_HEADER_FOUND "${OCCT_FILE_NAME}")
-          if (IS_HEADER_FOUND)
-            list (APPEND OCCT_HEADER_FILES_COMPLETE ${OCCT_FILE_IN_DIR})
-
-            # collect header files with name that does not contain its package one
-            string (REGEX MATCH "^${OCCT_PACKAGE}[_.]" IS_HEADER_MATHCING_PACKAGE "${OCCT_FILE_NAME}")
-            if (NOT IS_HEADER_MATHCING_PACKAGE)
-              list (APPEND OCCT_HEADER_FILE_WITH_PROPER_NAMES "${OCCT_FILE_NAME}")
-            endif()
-          endif()
-
-          # remove found element from list
-          list (REMOVE_AT OCCT_ALL_FILE_NAMES ${FILE_INDEX})
-          math (EXPR ALL_FILES_NB "${ALL_FILES_NB} - 1" ) # decrement number
-
-          break()
-        endif()
-      endforeach()
-
-      if (NOT OCCT_FILE_IN_DIR_STATUS)
-        message (STATUS "Warning. File ${OCCT_FILE_IN_DIR} is not listed in ${OCCT_COLLECT_SOURCE_DIR}/${OCCT_PACKAGE}/FILES")
-
-        string (REGEX MATCH ".+\\.[hlg]xx|.+\\.h$" IS_HEADER_FOUND "${OCCT_FILE_NAME}")
-        if (IS_HEADER_FOUND)
-          list (APPEND OCCT_HEADER_FILE_NAMES_NOT_IN_FILES ${OCCT_FILE_NAME})
-        endif()
-      endif()
+  foreach(OCCT_TOOLKIT ${THE_OCCT_BUILD_TOOLKITS})
+    # parse PACKAGES file
+    EXTRACT_TOOLKIT_PACKAGES (${THE_RELATIVE_PATH} ${OCCT_TOOLKIT} USED_PACKAGES)
+    foreach(OCCT_PACKAGE ${USED_PACKAGES})
+      EXTRACT_PACKAGE_FILES (${THE_RELATIVE_PATH} ${OCCT_PACKAGE} ALL_FILES _)
+      set (HEADER_FILES_FILTERING ${ALL_FILES})
+      list (FILTER HEADER_FILES_FILTERING INCLUDE REGEX ".+[.](h|lxx)")
+      list (APPEND OCCT_HEADER_FILES_COMPLETE ${HEADER_FILES_FILTERING})
     endforeach()
   endforeach()
-  
-  # create new file including found header
-  string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-  message (STATUS "Info: \(${CURRENT_TIME}\) Create header-links in inc folder...")
 
+  # Check that copying is done and match the include installation type.
+  # Check by first file in list.
+  list(GET OCCT_HEADER_FILES_COMPLETE 0 FIRST_OCCT_HEADER_FILE)
+  get_filename_component (FIRST_OCCT_HEADER_FILE ${FIRST_OCCT_HEADER_FILE} NAME)
+  set (TO_FORCE_COPY FALSE)
+  if (NOT EXISTS "${THE_ROOT_TARGET_OCCT_DIR}/${THE_OCCT_INSTALL_DIR_PREFIX}/${FIRST_OCCT_HEADER_FILE}")
+    set (TO_FORCE_COPY TRUE)
+  else()
+    # get content and check the number of lines inside file.
+    # If more then 1 then it is a symlink.
+    file (STRINGS "${THE_ROOT_TARGET_OCCT_DIR}/${THE_OCCT_INSTALL_DIR_PREFIX}/${FIRST_OCCT_HEADER_FILE}" FIRST_OCCT_HEADER_FILE_CONTENT)
+    list (LENGTH FIRST_OCCT_HEADER_FILE_CONTENT FIRST_OCCT_HEADER_FILE_CONTENT_LEN)
+    if (${FIRST_OCCT_HEADER_FILE_CONTENT_LEN} EQUAL 1 AND BUILD_INCLUDE_SYMLINK)
+      set (TO_FORCE_COPY TRUE)
+    elseif(${FIRST_OCCT_HEADER_FILE_CONTENT_LEN} GREATER 1 AND NOT BUILD_INCLUDE_SYMLINK)
+      set (TO_FORCE_COPY TRUE)
+    endif()
+  endif()
+  
   foreach (OCCT_HEADER_FILE ${OCCT_HEADER_FILES_COMPLETE})
     get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE} NAME)
-    set (OCCT_HEADER_FILE_CONTENT "#include \"${OCCT_HEADER_FILE}\"")
-    configure_file ("${TEMPLATE_HEADER_PATH}" "${ROOT_TARGET_OCCT_DIR}/${OCCT_INSTALL_DIR_PREFIX}/${HEADER_FILE_NAME}" @ONLY)
-  endforeach()
-  
-  install (FILES ${OCCT_HEADER_FILES_COMPLETE} DESTINATION "${INSTALL_DIR}/${OCCT_INSTALL_DIR_PREFIX}")
-  
-  string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-  message (STATUS "Info: \(${CURRENT_TIME}\) Checking headers in inc folder...")
-    
-  file (GLOB OCCT_HEADER_FILES_OLD "${ROOT_TARGET_OCCT_DIR}/${OCCT_INSTALL_DIR_PREFIX}/*")
-  foreach (OCCT_HEADER_FILE_OLD ${OCCT_HEADER_FILES_OLD})
-    get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE_OLD} NAME)
-    string (REGEX MATCH "^[a-zA-Z0-9]+" PACKAGE_NAME "${HEADER_FILE_NAME}")
-    
-    list (FIND OCCT_USED_PACKAGES ${PACKAGE_NAME} IS_HEADER_FOUND)
-    if (NOT ${IS_HEADER_FOUND} EQUAL -1)
-      if (NOT EXISTS "${OCCT_COLLECT_SOURCE_DIR}/${PACKAGE_NAME}/${HEADER_FILE_NAME}")
-        message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is not present in the sources and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
-        file (REMOVE "${OCCT_HEADER_FILE_OLD}")
+    set(TARGET_FILE "${THE_ROOT_TARGET_OCCT_DIR}/${THE_OCCT_INSTALL_DIR_PREFIX}/${HEADER_FILE_NAME}")
+
+    # Check if the file already exists in the target directory
+    if (TO_FORCE_COPY OR NOT EXISTS "${TARGET_FILE}")
+      if (BUILD_INCLUDE_SYMLINK)
+        file (CREATE_LINK "${OCCT_HEADER_FILE}" "${TARGET_FILE}" SYMBOLIC)
       else()
-        list (FIND OCCT_HEADER_FILE_NAMES_NOT_IN_FILES ${PACKAGE_NAME} IS_HEADER_FOUND)
-        if (NOT ${IS_HEADER_FOUND} EQUAL -1)
-          message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is present in the sources but not involved in FILES and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
-          file (REMOVE "${OCCT_HEADER_FILE_OLD}")
-        endif()
-      endif()
-    else()
-      set (IS_HEADER_FOUND -1)
-      if (NOT "${OCCT_HEADER_FILE_WITH_PROPER_NAMES}" STREQUAL "")
-        list (FIND OCCT_HEADER_FILE_WITH_PROPER_NAMES ${HEADER_FILE_NAME} IS_HEADER_FOUND)
-      endif()
-      
-      if (${IS_HEADER_FOUND} EQUAL -1)
-        message (STATUS "Warning. \(${PACKAGE_NAME}\) ${OCCT_HEADER_FILE_OLD} is not used and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
-        file (REMOVE "${OCCT_HEADER_FILE_OLD}")
+        set (OCCT_HEADER_FILE_CONTENT "#include \"${OCCT_HEADER_FILE}\"")
+        configure_file ("${TEMPLATE_HEADER_PATH}" "${TARGET_FILE}" @ONLY)
       endif()
     endif()
   endforeach()
-endmacro()
+
+  install (FILES ${OCCT_HEADER_FILES_COMPLETE} DESTINATION "${INSTALL_DIR}/${THE_OCCT_INSTALL_DIR_PREFIX}")
+endfunction()
+
+function(ADD_PRECOMPILED_HEADER INPUT_TARGET PRECOMPILED_HEADER THE_IS_PRIVATE)
+  if (NOT BUILD_USE_PCH)
+    return()
+  endif()
+  if (${THE_IS_PRIVATE})
+    target_precompile_headers(${INPUT_TARGET} PRIVATE "$<$<COMPILE_LANGUAGE:CXX>:${PRECOMPILED_HEADER}>")
+  else()
+    target_precompile_headers(${INPUT_TARGET} PUBLIC "$<$<COMPILE_LANGUAGE:CXX>:${PRECOMPILED_HEADER}>")
+  endif()
+endfunction()
 
 macro (OCCT_COPY_FILE_OR_DIR BEING_COPIED_OBJECT DESTINATION_PATH)
   # first of all, copy original files
@@ -409,11 +504,8 @@ function (OCCT_IS_PRODUCT_REQUIRED CSF_VAR_NAME USE_PRODUCT)
     message(STATUS "Warning: the list of being used toolkits is empty")
   else()
     foreach (USED_TOOLKIT ${BUILD_TOOLKITS})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${USED_TOOLKIT}/EXTERNLIB")
-        file (READ "${BUILD_PATCH}/src/${USED_TOOLKIT}/EXTERNLIB" FILE_CONTENT)
-      elseif (EXISTS "${CMAKE_SOURCE_DIR}/src/${USED_TOOLKIT}/EXTERNLIB")
-        file (READ "${CMAKE_SOURCE_DIR}/src/${USED_TOOLKIT}/EXTERNLIB" FILE_CONTENT)
-      endif()
+      set (FILE_CONTENT)
+      EXTRACT_TOOLKIT_EXTERNLIB ("src" ${USED_TOOLKIT} FILE_CONTENT)
 
       string (REGEX MATCH "${CSF_VAR_NAME}" DOES_FILE_CONTAIN "${FILE_CONTENT}")
 
@@ -425,17 +517,6 @@ function (OCCT_IS_PRODUCT_REQUIRED CSF_VAR_NAME USE_PRODUCT)
   endif()
 endfunction()
 
-function (FILE_TO_LIST FILE_NAME FILE_CONTENT)
-  set (LOCAL_FILE_CONTENT)
-  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${FILE_NAME}")
-    file (STRINGS "${BUILD_PATCH}/${FILE_NAME}" LOCAL_FILE_CONTENT)
-  elseif (EXISTS "${CMAKE_SOURCE_DIR}/${FILE_NAME}")
-    file (STRINGS "${CMAKE_SOURCE_DIR}/${FILE_NAME}" LOCAL_FILE_CONTENT)
-  endif()
-
-  set (${FILE_CONTENT} ${LOCAL_FILE_CONTENT} PARENT_SCOPE)
-endfunction()
-
 # Function to determine if TOOLKIT is OCCT toolkit
 function (IS_OCCT_TOOLKIT TOOLKIT_NAME MODULES IS_TOOLKIT_FOUND)
   set (${IS_TOOLKIT_FOUND} OFF PARENT_SCOPE)
@@ -449,58 +530,6 @@ function (IS_OCCT_TOOLKIT TOOLKIT_NAME MODULES IS_TOOLKIT_FOUND)
   endforeach(MODULE)
 endfunction()
 
-# TOOLKIT_DEPS is defined with dependencies from file src/TOOLKIT_NAME/EXTERNLIB.
-# CSF_ variables are ignored
-function (OCCT_TOOLKIT_DEP TOOLKIT_NAME TOOLKIT_DEPS)
-  FILE_TO_LIST ("src/${TOOLKIT_NAME}/EXTERNLIB" FILE_CONTENT)
-
-  #list (APPEND LOCAL_TOOLKIT_DEPS ${TOOLKIT_NAME})
-  set (LOCAL_TOOLKIT_DEPS)
-  foreach (FILE_CONTENT_LINE ${FILE_CONTENT})
-    string (REGEX MATCH "^TK" TK_FOUND ${FILE_CONTENT_LINE})
-    if ("x${FILE_CONTENT_LINE}" STREQUAL "xDRAWEXE" OR NOT "${TK_FOUND}" STREQUAL "")
-      list (APPEND LOCAL_TOOLKIT_DEPS ${FILE_CONTENT_LINE})
-    endif()
-  endforeach()
-
-  set (${TOOLKIT_DEPS} ${LOCAL_TOOLKIT_DEPS} PARENT_SCOPE)
-endfunction()
-
-# TOOLKIT_FULL_DEPS is defined with complete dependencies (all levels)
-function (OCCT_TOOLKIT_FULL_DEP TOOLKIT_NAME TOOLKIT_FULL_DEPS)
-  # first level dependencies are stored in LOCAL_TOOLKIT_FULL_DEPS
-  OCCT_TOOLKIT_DEP (${TOOLKIT_NAME} LOCAL_TOOLKIT_FULL_DEPS)
-
-  list (LENGTH LOCAL_TOOLKIT_FULL_DEPS LIST_LENGTH)
-  set (LIST_INDEX 0)
-  while (LIST_INDEX LESS LIST_LENGTH)
-    list (GET LOCAL_TOOLKIT_FULL_DEPS ${LIST_INDEX} CURRENT_TOOLKIT)
-    OCCT_TOOLKIT_DEP (${CURRENT_TOOLKIT} CURRENT_TOOLKIT_DEPS)
-
-    # append toolkits are not contained
-    foreach (CURRENT_TOOLKIT_DEP ${CURRENT_TOOLKIT_DEPS})
-      set (CURRENT_TOOLKIT_DEP_FOUND OFF)
-      foreach (LOCAL_TOOLKIT_FULL_DEP ${LOCAL_TOOLKIT_FULL_DEPS})
-        if ("${CURRENT_TOOLKIT_DEP}" STREQUAL "${LOCAL_TOOLKIT_FULL_DEP}")
-          set (CURRENT_TOOLKIT_DEP_FOUND ON)
-          break()
-        endif()
-      endforeach()
-      if ("${CURRENT_TOOLKIT_DEP_FOUND}" STREQUAL "OFF")
-        list (APPEND LOCAL_TOOLKIT_FULL_DEPS ${CURRENT_TOOLKIT_DEP})
-      endif()
-    endforeach()
-
-    # increment the list index
-    MATH(EXPR LIST_INDEX "${LIST_INDEX}+1")
-
-    # calculate new length
-    list (LENGTH LOCAL_TOOLKIT_FULL_DEPS LIST_LENGTH)
-  endwhile()
-
-  set (${TOOLKIT_FULL_DEPS} ${LOCAL_TOOLKIT_FULL_DEPS} PARENT_SCOPE)
-endfunction()
-
 # Function to get list of modules/toolkits/samples from file adm/${FILE_NAME}.
 # Creates list <$MODULE_LIST> to store list of MODULES and
 # <NAME_OF_MODULE>_TOOLKITS foreach module to store its toolkits, where "TOOLKITS" is defined by TOOLKITS_NAME_SUFFIX.
@@ -577,6 +606,74 @@ macro (CHECK_PATH_FOR_CONSISTENCY THE_ROOT_PATH_NAME THE_BEING_CHECKED_PATH_NAME
 
 endmacro()
 
+macro (FLEX_AND_BISON_TARGET_APPLY THE_PACKAGE_NAME RELATIVE_SOURCES_DIR)
+  # Generate Flex and Bison files
+  if (NOT ${BUILD_YACCLEX})
+    return()
+  endif()
+  # flex files
+  OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${THE_PACKAGE_NAME}" "*[.]lex" SOURCE_FILES_FLEX)
+  list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
+  # bison files
+  OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${THE_PACKAGE_NAME}" "*[.]yacc" SOURCE_FILES_BISON)
+  list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
+  if (NOT (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0))
+    message(FATAL_ERROR "Error: number of FLEX and BISON files is not equal for ${THE_PACKAGE_NAME}")
+  endif()
+  list (SORT SOURCE_FILES_FLEX)
+  list (SORT SOURCE_FILES_BISON)
+  math (EXPR SOURCE_FILES_FLEX_LEN "${SOURCE_FILES_FLEX_LEN} - 1")
+  foreach (FLEX_FILE_INDEX RANGE ${SOURCE_FILES_FLEX_LEN})
+    list (GET SOURCE_FILES_FLEX ${FLEX_FILE_INDEX} CURRENT_FLEX_FILE)
+    get_filename_component (CURRENT_FLEX_FILE_NAME ${CURRENT_FLEX_FILE} NAME_WE)
+    list (GET SOURCE_FILES_BISON ${FLEX_FILE_INDEX} CURRENT_BISON_FILE)
+    get_filename_component (CURRENT_BISON_FILE_NAME ${CURRENT_BISON_FILE} NAME_WE)
+    string (COMPARE EQUAL ${CURRENT_FLEX_FILE_NAME} ${CURRENT_BISON_FILE_NAME} ARE_FILES_EQUAL)
+    if (NOT (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL}))
+      continue()
+    endif()
+    # Note: files are generated in original source directory (not in patch!)
+    set (FLEX_BISON_TARGET_DIR "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${THE_PACKAGE_NAME}")
+    # choose appropriate extension for generated files: "cxx" if source file contains
+    # instruction to generate C++ code, "c" otherwise
+    set (BISON_OUTPUT_FILE_EXT "c")
+    set (FLEX_OUTPUT_FILE_EXT "c")
+    file (STRINGS "${CURRENT_BISON_FILE}" FILE_BISON_CONTENT)
+    foreach (FILE_BISON_CONTENT_LINE ${FILE_BISON_CONTENT})
+      string (REGEX MATCH "%language \"C\\+\\+\"" CXX_BISON_LANGUAGE_FOUND ${FILE_BISON_CONTENT_LINE})
+      if (CXX_BISON_LANGUAGE_FOUND)
+        set (BISON_OUTPUT_FILE_EXT "cxx")
+      endif()
+    endforeach()
+    file (STRINGS "${CURRENT_FLEX_FILE}" FILE_FLEX_CONTENT)
+    foreach (FILE_FLEX_CONTENT_LINE ${FILE_FLEX_CONTENT})
+      string (REGEX MATCH "%option c\\+\\+" CXX_FLEX_LANGUAGE_FOUND ${FILE_FLEX_CONTENT_LINE})
+      if (CXX_FLEX_LANGUAGE_FOUND)
+        set (FLEX_OUTPUT_FILE_EXT "cxx")
+      endif()
+    endforeach()
+    set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.${BISON_OUTPUT_FILE_EXT})
+    set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.${FLEX_OUTPUT_FILE_EXT})
+    if (EXISTS ${FLEX_BISON_TARGET_DIR}/${CURRENT_BISON_FILE_NAME}.tab.${BISON_OUTPUT_FILE_EXT})
+      message (STATUS "Info: remove old output BISON file: ${FLEX_BISON_TARGET_DIR}/${CURRENT_BISON_FILE_NAME}.tab.${BISON_OUTPUT_FILE_EXT}")
+      file(REMOVE ${FLEX_BISON_TARGET_DIR}/${CURRENT_BISON_FILE_NAME}.tab.${BISON_OUTPUT_FILE_EXT})
+    endif()
+    if (EXISTS ${FLEX_BISON_TARGET_DIR}/${CURRENT_BISON_FILE_NAME}.tab.hxx)
+      message (STATUS "Info: remove old output BISON file: ${FLEX_BISON_TARGET_DIR}/${CURRENT_BISON_FILE_NAME}.tab.hxx")
+      file(REMOVE ${FLEX_BISON_TARGET_DIR}/${CURRENT_BISON_FILE_NAME}.tab.hxx)
+    endif()
+    if (EXISTS ${FLEX_BISON_TARGET_DIR}/${FLEX_OUTPUT_FILE})
+      message (STATUS "Info: remove old output FLEX file: ${FLEX_BISON_TARGET_DIR}/${FLEX_OUTPUT_FILE}")
+      file(REMOVE ${FLEX_BISON_TARGET_DIR}/${FLEX_OUTPUT_FILE})
+    endif()
+    BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} "${FLEX_BISON_TARGET_DIR}/${BISON_OUTPUT_FILE}"
+                  COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME} -l -M ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/=")
+    FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} "${FLEX_BISON_TARGET_DIR}/${FLEX_OUTPUT_FILE}"
+                  COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME} -L")
+    ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
+  endforeach()
+endmacro()
+
 # Adds OCCT_INSTALL_BIN_LETTER variable ("" for Release, "d" for Debug and 
 # "i" for RelWithDebInfo) in OpenCASCADETargets-*.cmake files during 
 # installation process.
@@ -589,9 +686,7 @@ macro (OCCT_UPDATE_TARGET_FILE)
   endif()
 
   install (CODE
-  "cmake_policy(PUSH)
-  cmake_policy(SET CMP0007 NEW)
-  string (TOLOWER \"\${CMAKE_INSTALL_CONFIG_NAME}\" CMAKE_INSTALL_CONFIG_NAME_LOWERCASE)
+  "string (TOLOWER \"\${CMAKE_INSTALL_CONFIG_NAME}\" CMAKE_INSTALL_CONFIG_NAME_LOWERCASE)
   file (GLOB ALL_OCCT_TARGET_FILES \"${INSTALL_DIR}/${INSTALL_DIR_CMAKE}/OpenCASCADE*Targets-\${CMAKE_INSTALL_CONFIG_NAME_LOWERCASE}.cmake\")
   foreach(TARGET_FILENAME \${ALL_OCCT_TARGET_FILES})
     file (STRINGS \"\${TARGET_FILENAME}\" TARGET_FILE_CONTENT)
@@ -600,8 +695,7 @@ macro (OCCT_UPDATE_TARGET_FILE)
       string (REGEX REPLACE \"[\\\\]?[\\\$]{OCCT_INSTALL_BIN_LETTER}\" \"\${OCCT_INSTALL_BIN_LETTER}\" line \"\${line}\")
       file (APPEND \"\${TARGET_FILENAME}\" \"\${line}\\n\")
     endforeach()
-  endforeach()
-  cmake_policy(POP)")
+  endforeach()")
 endmacro()
 
 macro (OCCT_INSERT_CODE_FOR_TARGET)
@@ -615,17 +709,14 @@ macro (OCCT_INSERT_CODE_FOR_TARGET)
 endmacro()
 
 macro (OCCT_UPDATE_DRAW_DEFAULT_FILE)
-  install(CODE "cmake_policy(PUSH)
-  cmake_policy(SET CMP0007 NEW)
-  set (DRAW_DEFAULT_FILE_NAME \"${INSTALL_DIR}/${INSTALL_DIR_RESOURCE}/DrawResources/DrawPlugin\")
+  install(CODE "set (DRAW_DEFAULT_FILE_NAME \"${INSTALL_DIR}/${INSTALL_DIR_RESOURCE}/DrawResources/DrawPlugin\")
   file (STRINGS \"\${DRAW_DEFAULT_FILE_NAME}\" DRAW_DEFAULT_CONTENT)
   file (REMOVE \"\${DRAW_DEFAULT_FILE_NAME}\")
   foreach (line IN LISTS DRAW_DEFAULT_CONTENT)
     string (REGEX MATCH \": TK\([a-zA-Z]+\)$\" IS_TK_LINE \"\${line}\")
     string (REGEX REPLACE \": TK\([a-zA-Z]+\)$\" \": TK\${CMAKE_MATCH_1}${BUILD_SHARED_LIBRARY_NAME_POSTFIX}\" line \"\${line}\")
     file (APPEND \"\${DRAW_DEFAULT_FILE_NAME}\" \"\${line}\\n\")
-  endforeach()
-  cmake_policy(POP)")
+  endforeach()")
 endmacro()
 
 macro (OCCT_CREATE_SYMLINK_TO_FILE LIBRARY_NAME LINK_NAME)

adm/cmake/occt_toolkit.cmake

@@ -23,7 +23,7 @@ if ("${OCCT_TOOLKITS_NAME_SUFFIX}" STREQUAL "")
 endif()
 
 # parse PACKAGES file
-FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+EXTRACT_TOOLKIT_PACKAGES (${RELATIVE_SOURCES_DIR} ${PROJECT_NAME} USED_PACKAGES)
 if ("${USED_PACKAGES}" STREQUAL "")
   set (USED_PACKAGES ${PROJECT_NAME})
 endif()
@@ -47,7 +47,6 @@ endif()
 # Get all used packages from toolkit
 UNSET(RESOURCE_FILES)
 foreach (OCCT_PACKAGE ${USED_PACKAGES})
-
   #remove part after "/" in the OCCT_PACKAGE variable if exists
   string (FIND "${OCCT_PACKAGE}" "/" _index)
   if (_index GREATER -1)
@@ -57,130 +56,30 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
     set (OCCT_PACKAGE_NAME "${OCCT_PACKAGE}")
   endif()
 
-  if (WIN32)
-    list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE_NAME}_DLL")
-  endif()
-
   set (SOURCE_FILES)
   set (HEADER_FILES)
 
-  # Generate Flex and Bison files
-  if (${BUILD_YACCLEX})
-    # flex files
-    OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
-    list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
+  EXTRACT_PACKAGE_FILES (${RELATIVE_SOURCES_DIR} ${OCCT_PACKAGE} ALL_FILES INCLUDE_FOLDER)
 
-    # bison files
-    OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
-    list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
-
-    if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
-      
-      list (SORT SOURCE_FILES_FLEX)
-      list (SORT SOURCE_FILES_BISON)
-
-      math (EXPR SOURCE_FILES_FLEX_LEN "${SOURCE_FILES_FLEX_LEN} - 1")
-      foreach (FLEX_FILE_INDEX RANGE ${SOURCE_FILES_FLEX_LEN})
-
-        list (GET SOURCE_FILES_FLEX ${FLEX_FILE_INDEX} CURRENT_FLEX_FILE)
-        get_filename_component (CURRENT_FLEX_FILE_NAME ${CURRENT_FLEX_FILE} NAME_WE)
-
-        list (GET SOURCE_FILES_BISON ${FLEX_FILE_INDEX} CURRENT_BISON_FILE)
-        get_filename_component (CURRENT_BISON_FILE_NAME ${CURRENT_BISON_FILE} NAME_WE)
-          
-        string (COMPARE EQUAL ${CURRENT_FLEX_FILE_NAME} ${CURRENT_BISON_FILE_NAME} ARE_FILES_EQUAL)
-
-        if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
-
-          # Note: files are generated in original source directory (not in patch!)
-          set (FLEX_BISON_TARGET_DIR "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}")
-
-          # choose appropriate extension for generated files: "cxx" if source file contains
-          # instruction to generate C++ code, "c" otherwise
-          set (BISON_OUTPUT_FILE_EXT "c")
-          set (FLEX_OUTPUT_FILE_EXT "c")
-          file (STRINGS "${CURRENT_BISON_FILE}" FILE_BISON_CONTENT)
-          foreach (FILE_BISON_CONTENT_LINE ${FILE_BISON_CONTENT})
-            string (REGEX MATCH "%language \"C\\+\\+\"" CXX_BISON_LANGUAGE_FOUND ${FILE_BISON_CONTENT_LINE})
-            if (CXX_BISON_LANGUAGE_FOUND)
-              set (BISON_OUTPUT_FILE_EXT "cxx")
-            endif()
-          endforeach()
-          file (STRINGS "${CURRENT_FLEX_FILE}" FILE_FLEX_CONTENT)
-          foreach (FILE_FLEX_CONTENT_LINE ${FILE_FLEX_CONTENT})
-            string (REGEX MATCH "%option c\\+\\+" CXX_FLEX_LANGUAGE_FOUND ${FILE_FLEX_CONTENT_LINE})
-            if (CXX_FLEX_LANGUAGE_FOUND)
-              set (FLEX_OUTPUT_FILE_EXT "cxx")
-
-              # install copy of FlexLexer.h locally to allow further building without flex
-              if (FLEX_INCLUDE_DIR AND EXISTS "${FLEX_INCLUDE_DIR}/FlexLexer.h")
-                configure_file("${FLEX_INCLUDE_DIR}/FlexLexer.h" "${FLEX_BISON_TARGET_DIR}/FlexLexer.h" @ONLY NEWLINE_STYLE LF)
-              endif()
-            endif()
-          endforeach()
-          set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.${BISON_OUTPUT_FILE_EXT})
-          set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.${FLEX_OUTPUT_FILE_EXT})
-
-          BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} "${FLEX_BISON_TARGET_DIR}/${BISON_OUTPUT_FILE}"
-                        COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME} -l -M ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/=")
-          FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} "${FLEX_BISON_TARGET_DIR}/${FLEX_OUTPUT_FILE}"
-                        COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME} -L")
-          ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
-           
-          list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
-        endif()
-      endforeach()
-    endif()
-  endif()
-
-  # header files
-  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES")
-    file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
-    file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
-    file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
-
-    file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
-    if(APPLE)
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
-    endif()
-  else()
-    file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
-    file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
-    file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
-
-    file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
-    if(APPLE)
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
-    endif()
-  endif()
-    
-  list (APPEND HEADER_FILES ${HEADER_FILES_M} ${HEADER_FILES_LXX} ${SOURCE_FILES_GXX})
-  list (APPEND SOURCE_FILES ${SOURCE_FILES_C})
+  set (HEADER_FILES_FILTERING ${ALL_FILES})
+  set (SOURCE_FILES_FILTERING ${ALL_FILES})
+  
+  list (FILTER HEADER_FILES_FILTERING INCLUDE REGEX ".+[.](h|lxx)")
+  
   if(APPLE)
-    list (APPEND SOURCE_FILES ${SOURCE_FILES_M})
+    list (FILTER SOURCE_FILES_FILTERING INCLUDE REGEX ".+[.](c|mm)")
+  else()
+    list (FILTER SOURCE_FILES_FILTERING INCLUDE REGEX ".+[.](c)")
   endif()
 
-  foreach(HEADER_FILE ${HEADER_FILES})
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-      message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-      list (APPEND USED_INCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-      SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-    else()
-      list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-      SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-    endif()
-  endforeach()
+  list (APPEND HEADER_FILES ${HEADER_FILES_FILTERING})
+  list (APPEND SOURCE_FILES ${SOURCE_FILES_FILTERING})
 
-  foreach(SOURCE_FILE ${SOURCE_FILES})
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      list (APPEND USED_SRCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-    else()
-      list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-    endif()
-  endforeach()
+  SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${HEADER_FILES_FILTERING}")
+  SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${SOURCE_FILES_FILTERING}")
+
+  list (APPEND USED_INCFILES ${HEADER_FILES})
+  list (APPEND USED_SRCFILES ${SOURCE_FILES})
 
   if (USE_QT)
     FIND_AND_INSTALL_QT_RESOURCES (${OCCT_PACKAGE} RESOURCE_FILES)
@@ -241,9 +140,15 @@ else()
     else()
       set (aReleasePdbConf)
     endif()
-    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
+    if (BUILD_SHARED_LIBS)
+      install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
              CONFIGURATIONS Debug ${aReleasePdbConf} RelWithDebInfo
              DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
+    else()
+      install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
+             CONFIGURATIONS Debug ${aReleasePdbConf} RelWithDebInfo
+             DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}")
+    endif()
   endif()
 
   if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
@@ -255,7 +160,8 @@ else()
            EXPORT OpenCASCADE${CURRENT_MODULE}Targets
            RUNTIME DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}"
            ARCHIVE DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}"
-           LIBRARY DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}")
+           LIBRARY DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}"
+           INCLUDES DESTINATION ${INSTALL_DIR_INCLUDE})
 
   if (NOT WIN32)
     if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
@@ -280,84 +186,92 @@ get_property (OCC_VERSION_MAJOR GLOBAL PROPERTY OCC_VERSION_MAJOR)
 get_property (OCC_VERSION_MINOR GLOBAL PROPERTY OCC_VERSION_MINOR)
 get_property (OCC_VERSION_MAINTENANCE GLOBAL PROPERTY OCC_VERSION_MAINTENANCE)
 
-if (ANDROID)
-  # do not append version to the filename
-  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}")
-else()
-  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}"
-                                                    SOVERSION     "${OCC_VERSION_MAJOR}"
-                                                    VERSION       "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}.${OCC_VERSION_MAINTENANCE}")
+set (OCC_SOVERSION "")
+if (BUILD_SOVERSION_NUMBERS GREATER 2)
+  set (OCC_SOVERSION "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}.${OCC_VERSION_MAINTENANCE}")
+elseif (BUILD_SOVERSION_NUMBERS GREATER 1)
+  set (OCC_SOVERSION "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}")
+elseif (BUILD_SOVERSION_NUMBERS GREATER 0)
+  set (OCC_SOVERSION "${OCC_VERSION_MAJOR}")
 endif()
+set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}"
+                                                  SOVERSION     "${OCC_SOVERSION}"
+                                                  VERSION       "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}.${OCC_VERSION_MAINTENANCE}")
 
 set (USED_TOOLKITS_BY_CURRENT_PROJECT)
-set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)
+set (USED_EXTERNLIB_AND_TOOLKITS)
 
-# parse EXTERNLIB file
+# SOME EXECUTABLE PROJECTS MAY USE CUSTOM TOOLKITS AND EXTERNAL LIBRARIES
 if (CUSTOM_EXTERNLIB)
   set (USED_EXTERNLIB_AND_TOOLKITS ${CUSTOM_EXTERNLIB})
+  foreach (EXTERNAL_LIB ${CUSTOM_EXTERNLIB})
+    string (REGEX MATCH "^TK" TK_FOUND ${EXTERNAL_LIB})
+    if (TK_FOUND)
+      list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${EXTERNAL_LIB})
+    endif()
+  endforeach()
 else()
-  FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
+  EXTRACT_TOOLKIT_EXTERNLIB ("${RELATIVE_SOURCES_DIR}" "${PROJECT_NAME}" USED_EXTERNLIB_AND_TOOLKITS)
+  EXCTRACT_TOOLKIT_DEPS ("${RELATIVE_SOURCES_DIR}" "${PROJECT_NAME}" USED_TOOLKITS_BY_CURRENT_PROJECT _)
+  list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT ${PROJECT_NAME})
 endif()
+
 foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
   string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
-  if (NOT COMMENT_FOUND)
-    string (REGEX MATCH "^TK" TK_FOUND ${USED_ITEM})
-    string (REGEX MATCH "^vtk" VTK_FOUND ${USED_ITEM})
-    
-    if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
-      list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
-      if (NOT "${VTK_FOUND}" STREQUAL "" AND BUILD_SHARED_LIBS AND INSTALL_VTK AND COMMAND OCCT_INSTALL_VTK)
-        OCCT_INSTALL_VTK(${USED_ITEM})
-      endif()
-    else()
-      string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
-      if ("${CSF_FOUND}" STREQUAL "")
-        message (STATUS "Info: ${USED_ITEM} from ${PROJECT_NAME} skipped due to it is empty")
-      else() # get CSF_ value
-        set (CURRENT_CSF ${${USED_ITEM}})
-        if (NOT "x${CURRENT_CSF}" STREQUAL "x")
-          if ("${CURRENT_CSF}" STREQUAL "CSF_OpenGlLibs")
-            add_definitions (-DHAVE_OPENGL)
-          endif()
-          if ("${CURRENT_CSF}" STREQUAL "CSF_OpenGlesLibs")
-            add_definitions (-DHAVE_GLES2)
-          endif()
+  if (COMMENT_FOUND)
+    continue()
+  endif()
 
-          set (LIBRARY_FROM_CACHE 0)
-          separate_arguments (CURRENT_CSF)
-          foreach (CSF_LIBRARY ${CURRENT_CSF})
-            string (TOLOWER "${CSF_LIBRARY}" CSF_LIBRARY)
-            string (REPLACE "+" "[+]" CSF_LIBRARY "${CSF_LIBRARY}")
-            string (REPLACE "." "" CSF_LIBRARY "${CSF_LIBRARY}")
-            get_cmake_property(ALL_CACHE_VARIABLES CACHE_VARIABLES)
-            string (REGEX MATCHALL "(^|;)3RDPARTY_[^;]+_LIBRARY[^;]*" ALL_CACHE_VARIABLES "${ALL_CACHE_VARIABLES}")
-            foreach (CACHE_VARIABLE ${ALL_CACHE_VARIABLES})
-              set (CURRENT_CACHE_LIBRARY ${${CACHE_VARIABLE}})
-              string (TOLOWER "${CACHE_VARIABLE}" CACHE_VARIABLE)
+  string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
+  string (REGEX MATCH "^vtk" VTK_FOUND ${USED_ITEM})
 
-              if (EXISTS "${CURRENT_CACHE_LIBRARY}" AND NOT IS_DIRECTORY "${CURRENT_CACHE_LIBRARY}")
-                string (REGEX MATCH "_${CSF_LIBRARY}$" IS_ENDING "${CACHE_VARIABLE}")
-                string (REGEX MATCH "^([a-z]+)" CSF_WO_VERSION "${CSF_LIBRARY}")
-                string (REGEX MATCH "_${CSF_WO_VERSION}$" IS_ENDING_WO_VERSION "${CACHE_VARIABLE}")
-                if ("3rdparty_${CSF_LIBRARY}_library" STREQUAL "${CACHE_VARIABLE}" OR
-                    "3rdparty_${CSF_WO_VERSION}_library" STREQUAL "${CACHE_VARIABLE}" OR
-                    NOT "x${IS_ENDING}" STREQUAL "x" OR
-                    NOT "x${IS_ENDING_WO_VERSION}" STREQUAL "x")
-                  list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT "${CURRENT_CACHE_LIBRARY}")
-                  set (LIBRARY_FROM_CACHE 1)
-                endif()
-              endif()
-            endforeach()
-          endforeach()
-
-          if (NOT ${LIBRARY_FROM_CACHE})
-            # prepare a list from a string with whitespaces
-            separate_arguments (CURRENT_CSF)
-            list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT ${CURRENT_CSF})
-          endif()
+  if (NOT "${VTK_FOUND}" STREQUAL "")
+    list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
+    if (BUILD_SHARED_LIBS AND INSTALL_VTK AND COMMAND OCCT_INSTALL_VTK)
+      OCCT_INSTALL_VTK(${USED_ITEM})
+    endif()
+    continue()
+  endif()
+  # Search for 3rd-party libraries as a dependency
+  set (CURRENT_CSF ${${USED_ITEM}})
+  if ("x${CURRENT_CSF}" STREQUAL "x")
+    continue()
+  endif()
+  if ("${CURRENT_CSF}" STREQUAL "${CSF_OpenGlLibs}")
+    add_definitions (-DHAVE_OPENGL)
+  endif()
+  if ("${CURRENT_CSF}" STREQUAL "${CSF_OpenGlesLibs}")
+    add_definitions (-DHAVE_GLES2)
+  endif()
+  set (LIBRARY_FROM_CACHE 0)
+  separate_arguments (CURRENT_CSF)
+  foreach (CSF_LIBRARY ${CURRENT_CSF})
+    string (TOLOWER "${CSF_LIBRARY}" CSF_LIBRARY)
+    string (REPLACE "+" "[+]" CSF_LIBRARY "${CSF_LIBRARY}")
+    string (REPLACE "." "" CSF_LIBRARY "${CSF_LIBRARY}")
+    get_cmake_property(ALL_CACHE_VARIABLES CACHE_VARIABLES)
+    string (REGEX MATCHALL "(^|;)3RDPARTY_[^;]+_LIBRARY[^;]*" ALL_CACHE_VARIABLES "${ALL_CACHE_VARIABLES}")
+    foreach (CACHE_VARIABLE ${ALL_CACHE_VARIABLES})
+      set (CURRENT_CACHE_LIBRARY ${${CACHE_VARIABLE}})
+      string (TOLOWER "${CACHE_VARIABLE}" CACHE_VARIABLE)
+      if (EXISTS "${CURRENT_CACHE_LIBRARY}" AND NOT IS_DIRECTORY "${CURRENT_CACHE_LIBRARY}")
+        string (REGEX MATCH "_${CSF_LIBRARY}$" IS_ENDING "${CACHE_VARIABLE}")
+        string (REGEX MATCH "^([a-z]+)" CSF_WO_VERSION "${CSF_LIBRARY}")
+        string (REGEX MATCH "_${CSF_WO_VERSION}$" IS_ENDING_WO_VERSION "${CACHE_VARIABLE}")
+        if ("3rdparty_${CSF_LIBRARY}_library" STREQUAL "${CACHE_VARIABLE}" OR
+            "3rdparty_${CSF_WO_VERSION}_library" STREQUAL "${CACHE_VARIABLE}" OR
+            NOT "x${IS_ENDING}" STREQUAL "x" OR
+            NOT "x${IS_ENDING_WO_VERSION}" STREQUAL "x")
+          list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT "${CURRENT_CACHE_LIBRARY}")
+          set (LIBRARY_FROM_CACHE 1)
         endif()
       endif()
-    endif()
+    endforeach()
+  endforeach()
+  if (NOT ${LIBRARY_FROM_CACHE} AND NOT "${CURRENT_CSF}" STREQUAL "")
+    # prepare a list from a string with whitespaces
+    separate_arguments (CURRENT_CSF)
+    list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT ${CURRENT_CSF})
   endif()
 endforeach()
 
@@ -400,8 +314,8 @@ if (BUILD_SHARED_LIBS OR EXECUTABLE_PROJECT)
   if(IS_VTK_9XX)
     string (REGEX REPLACE "vtk" "VTK::" USED_TOOLKITS_BY_CURRENT_PROJECT "${USED_TOOLKITS_BY_CURRENT_PROJECT}")
   endif()
-  target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
 endif()
+target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
 
 if (USE_QT)
   foreach (PROJECT_LIBRARY_DEBUG ${PROJECT_LIBRARIES_DEBUG})
@@ -419,35 +333,3 @@ if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
     message (STATUS "Warning: internal deprecation warnings by Standard_DEPRECATED have been disabled due to old gcc version being used")
   endif()
 endif()
-
-# use Cotire to accelerate build via usage of precompiled headers
-if (BUILD_USE_PCH)
-  if (WIN32)
-    # prevent definition of min and max macros through inclusion of Windows.h
-    # (for cotire builds)
-    add_definitions("-DNOMINMAX")
-    # avoid warnings on deprecated names from standard C library (see strsafe.h)
-    add_definitions("-DSTRSAFE_NO_DEPRECATE")
-    # avoid "std::Equal1" warning in QANCollection_Stl.cxx in debug mode
-    # suggesting using msvc "Checked Iterators"
-    add_definitions("-D_SCL_SECURE_NO_WARNINGS")
-  endif()
-
-  # Exclude system-provided glext.h.
-  # These macros are already defined within OpenGl_GlFunctions.hxx,
-  # however we have to duplicate them here for building TKOpenGl with PCH.
-  add_definitions("-DGL_GLEXT_LEGACY")
-  add_definitions("-DGLX_GLXEXT_LEGACY")
-
-  # workaround for old gcc
-  if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
-    add_definitions("-D__STDC_CONSTANT_MACROS")
-    add_definitions("-D__STDC_FORMAT_MACROS")
-  endif()
-
-  # unity builds are not used since they do not add speed but cause conflicts
-  # in TKV3d
-  set_target_properties(${PROJECT_NAME} PROPERTIES COTIRE_ADD_UNITY_BUILD FALSE)
-
-  cotire(${PROJECT_NAME})
-endif()

adm/cmake/tbb.cmake

@@ -1,294 +1,248 @@
 # tbb
 
-if (NOT DEFINED INSTALL_TBB AND BUILD_SHARED_LIBS)
-  set (INSTALL_TBB OFF CACHE BOOL "${INSTALL_TBB_DESCR}")
-endif()
-
-# tbb directory
-if (NOT DEFINED 3RDPARTY_TBB_DIR)
-  set (3RDPARTY_TBB_DIR "" CACHE PATH "The directory containing tbb")
-endif()
-
 if (MSVC AND BUILD_SHARED_LIBS)
   add_definitions (-D__TBB_NO_IMPLICIT_LINKAGE)
   add_definitions (-D__TBBMALLOC_NO_IMPLICIT_LINKAGE)
 endif()
 
-# include occt macros. compiler_bitness, os_wiht_bit, compiler
-OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
+if (NOT DEFINED INSTALL_TBB AND BUILD_SHARED_LIBS)
+  set (INSTALL_TBB OFF CACHE BOOL "${INSTALL_TBB_DESCR}")
+endif()
 
-# specify TBB folder in connectin with 3RDPARTY_DIR
-if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
-  #CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_DIR 3RDPARTY_TBB_DIR PATH "The directory containing tbb")
+# Initialize tbb directory.
+if (NOT DEFINED 3RDPARTY_TBB_DIR)
+  set (3RDPARTY_TBB_DIR "" CACHE PATH "The directory containing tbb")
+endif()
 
-  if (NOT 3RDPARTY_TBB_DIR OR NOT EXISTS "${3RDPARTY_TBB_DIR}")
+if (WIN32)
+  if (NOT DEFINED 3RDPARTY_DIR)
+    message (FATAL_ERROR "3RDPARTY_DIR is not defined.")
+  endif()
+  if ("${3RDPARTY_DIR}" STREQUAL "")
+    message (FATAL_ERROR "3RDPARTY_DIR is empty string.")
+  endif()
+  if (NOT EXISTS "${3RDPARTY_DIR}")
+    message (FATAL_ERROR "3RDPARTY_DIR is not exist.")
+  endif()
+
+  # Below, we have correct 3RDPARTY_DIR.
+
+  # Initialize TBB folder in connection with 3RDPARTY_DIR.
+  if (("${3RDPARTY_TBB_DIR}" STREQUAL "") OR (NOT EXISTS "${3RDPARTY_TBB_DIR}"))
     FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" TBB TBB_DIR_NAME)
     if (TBB_DIR_NAME)
       set (3RDPARTY_TBB_DIR "${3RDPARTY_DIR}/${TBB_DIR_NAME}" CACHE PATH "The directory containing tbb" FORCE)
     endif()
   endif()
-else()
-  #set (3RDPARTY_TBB_DIR "" CACHE PATH "The directory containing TBB" FORCE)
-endif()
 
-if (NOT DEFINED 3RDPARTY_TBB_INCLUDE_DIR)
-  set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE PATH "The directory containing headers of the TBB")
-endif()
+  # Here we have full path name to installation directory of TBB.
+  # Employ it.
+  if (EXISTS "${3RDPARTY_TBB_DIR}")
+    find_package (
+      TBB 2021.5
+      PATHS "${3RDPARTY_TBB_DIR}" NO_DEFAULT_PATH
+      REQUIRED
+      CONFIG)
 
-if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
-    # check 3RDPARTY_TBB_INCLUDE_DIR for consictency with specified 3RDPARTY_TBB_DIR
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_TBB_INCLUDE_DIR PATH "The directory containing headers of the TBB")
-endif()
-
-# tbb.h
-if (NOT 3RDPARTY_TBB_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_TBB_INCLUDE_DIR}")
-
-  set (HEADER_NAMES tbb.h tbb/tbb.h)
-
-  # set 3RDPARTY_TBB_INCLUDE_DIR as notfound, otherwise find_library can't assign a new value to 3RDPARTY_TBB_INCLUDE_DIR
-  set (3RDPARTY_TBB_INCLUDE_DIR "3RDPARTY_TBB_INCLUDE_DIR-NOTFOUND" CACHE PATH "the path to tbb.h" FORCE)
-
-  if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
-    find_path (3RDPARTY_TBB_INCLUDE_DIR NAMES ${HEADER_NAMES}
-                                              PATHS ${3RDPARTY_TBB_DIR}
-                                              PATH_SUFFIXES include
-                                              CMAKE_FIND_ROOT_PATH_BOTH
-                                              NO_DEFAULT_PATH)
-  else()
-    find_path (3RDPARTY_TBB_INCLUDE_DIR NAMES ${HEADER_NAMES}
-                                              PATH_SUFFIXES include
-                                              CMAKE_FIND_ROOT_PATH_BOTH)
-  endif()
-endif()
-
-if (3RDPARTY_TBB_INCLUDE_DIR AND EXISTS "${3RDPARTY_TBB_INCLUDE_DIR}")
-  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_TBB_INCLUDE_DIR}")
-else()
-  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TBB_INCLUDE_DIR)
-
-  set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE PATH "the path to tbb.h" FORCE)
-endif()
-
-# common steps for tbb and tbbmalloc
-macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
-
-  string (TOUPPER ${PRODUCT_LIBRARY_NAME} upper_PRODUCT_LIBRARY_NAME)
-
-  # define required tbb/tbbmalloc variables
-  if (NOT DEFINED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY OR NOT 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
-    set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY "" CACHE FILEPATH "${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
-  endif()
-
-  if (NOT DEFINED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)
-    set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR "" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} library")
-  endif()
-
-  if (WIN32)
-    if (NOT DEFINED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL OR NOT 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR OR NOT EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
-      set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL "" CACHE FILEPATH "${upper_PRODUCT_LIBRARY_NAME} shared library" FORCE)
+    # Archive include directory
+    get_target_property (TBB_INCLUDE_DIR TBB::tbb INTERFACE_INCLUDE_DIRECTORIES)
+    if (NOT DEFINED 3RDPARTY_TBB_INCLUDE_DIR)
+      set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE PATH "The directory containing headers of the TBB")
     endif()
-  endif()
-
-  if (WIN32 AND NOT DEFINED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
-    set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR "" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} shared library")
-  endif()
-
-  # check 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_ paths for consistency with specified 3RDPARTY_TBB_DIR
-  if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY FILEPATH "the path to ${upper_PRODUCT_LIBRARY_NAME} library")
-
-    if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}")
-      get_filename_component (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}" PATH)
-      set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
+    if (EXISTS "${TBB_INCLUDE_DIR}")
+      set (3RDPARTY_TBB_INCLUDE_DIR "${TBB_INCLUDE_DIR}" CACHE PATH "The directory containing headers of the TBB" FORCE)
+      list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_TBB_INCLUDE_DIR}")
     else()
-      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} library")
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TBB_INCLUDE_DIR)
     endif()
 
-    if (WIN32)
-      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL FILEPATH "the path to ${upper_PRODUCT_LIBRARY_NAME} shared library")
+    # Get installed configuration of tbb
+    get_target_property (TARGET_TBB_IMPORT_CONFS TBB::tbb IMPORTED_CONFIGURATIONS)
+    list (GET TARGET_TBB_IMPORT_CONFS 0 CHOSEN_IMPORT_CONF)
 
-      if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}")
-        get_filename_component (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}" PATH)
-        set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} shared library" FORCE)
-      else()
+    separate_arguments (CSF_TBB)
+    foreach (LIB IN LISTS CSF_TBB)
+      string(TOLOWER "${LIB}" LIB_LOWER)
+      string(TOUPPER "${LIB}" LIB_UPPER)
 
-      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} shared library")
+      # Archive *.lib files and directory containing it.
+      get_target_property (TBB_LIB_FILE "TBB::${LIB_LOWER}" IMPORTED_IMPLIB_${CHOSEN_IMPORT_CONF})
+      # Reserve cache variable for *.lib.
+      if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_LIBRARY)
+        set (3RDPARTY_${LIB_UPPER}_LIBRARY "" CACHE FILEPATH "${LIB_UPPER} library (*.lib)")
       endif()
-    endif()
-  endif()
-
-  OCCT_MAKE_COMPILER_SHORT_NAME()
-  OCCT_MAKE_COMPILER_BITNESS()
-
-  if (${COMPILER_BITNESS} EQUAL 32)
-    set (${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME ia32)
-  else()
-    set (${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME intel64)
-  endif()
-
-  # tbb/tbbmalloc library
-  if (NOT 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY OR NOT EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}")
-    
-    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
-    set (PRODUCT_PATH_SUFFIXES lib ${PRODUCT_LIBRARY_NAME})
-
-    # set 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY
-    set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY "3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY-NOTFOUND" CACHE FILEPATH "The path to ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
-
-    if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
-      if (NOT EXISTS "${3RDPARTY_TBB_DIR}/lib/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/${COMPILER}")
-        if (EXISTS "${3RDPARTY_TBB_DIR}/lib/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}")
-          file (GLOB ${upper_PRODUCT_LIBRARY_NAME}_COMPILER_LIST "${3RDPARTY_TBB_DIR}/lib/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/*")
-          if (${upper_PRODUCT_LIBRARY_NAME}_COMPILER_LIST)
-            list (GET ${upper_PRODUCT_LIBRARY_NAME}_COMPILER_LIST -1 THE_MOST_FRESH_COMPILER_VERSION)
-            if (THE_MOST_FRESH_COMPILER_VERSION)
-              get_filename_component (THE_MOST_FRESH_COMPILER_VERSION_NAME "${THE_MOST_FRESH_COMPILER_VERSION}" NAME)
-              set (PRODUCT_PATH_SUFFIXES lib ${PRODUCT_LIBRARY_NAME} lib/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/${THE_MOST_FRESH_COMPILER_VERSION_NAME})
-            endif()
-          endif()
-        endif()
+      # Reserve cache variable for directory containing *.lib file.
+      if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_LIBRARY_DIR)
+        set (3RDPARTY_${LIB_UPPER}_LIBRARY_DIR "" CACHE PATH "The directory containing ${LIB_UPPER} library (*.lib)")
+      endif()
+      if (EXISTS "${TBB_LIB_FILE}")
+        set (3RDPARTY_${LIB_UPPER}_LIBRARY
+             "${TBB_LIB_FILE}"
+             CACHE FILEPATH
+             "${LIB_UPPER} library (*.lib)"
+             FORCE)
+        get_filename_component (TBB_LIB_FILE_DIRECTORY "${TBB_LIB_FILE}" DIRECTORY)
+        set (3RDPARTY_${LIB_UPPER}_LIBRARY_DIR
+             "${TBB_LIB_FILE_DIRECTORY}"
+             CACHE PATH
+             "The directory containing ${LIB_UPPER} library (*.lib)"
+             FORCE)
+        list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${LIB_UPPER}_LIBRARY_DIR}")
       else()
-        set (PRODUCT_PATH_SUFFIXES lib ${PRODUCT_LIBRARY_NAME} lib/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/${COMPILER})
+        list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${LIB_UPPER}_LIBRARY_DIR)
       endif()
 
-      find_library (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY ${PRODUCT_LIBRARY_NAME}
-                                         PATHS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}" "${3RDPARTY_TBB_DIR}"
-                                         PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES}
-                                         CMAKE_FIND_ROOT_PATH_BOTH
-                                         NO_DEFAULT_PATH)
-    else()
-      find_library (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY ${PRODUCT_LIBRARY_NAME}
-                                         PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES}
-                                         CMAKE_FIND_ROOT_PATH_BOTH)
-    endif()
+      # Archive *.dll files and directory containing it.
+      get_target_property (TBB_DLL_FILE "TBB::${LIB_LOWER}" IMPORTED_LOCATION_${CHOSEN_IMPORT_CONF})
+      # Reserve cache variable for *.dll.
+      if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_DLL)
+        set (3RDPARTY_${LIB_UPPER}_DLL "" CACHE FILEPATH "${LIB_UPPER} library (*.dll)")
+      endif()
+      # Reserve cache variable for directory containing *.dll file.
+      if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_DLL_DIR)
+        set (3RDPARTY_${LIB_UPPER}_DLL_DIR "" CACHE PATH "The directory containing ${LIB_UPPER} library (*.dll)")
+      endif()
+      if (EXISTS "${TBB_DLL_FILE}")
+        set (3RDPARTY_${LIB_UPPER}_DLL
+             "${TBB_DLL_FILE}"
+             CACHE FILEPATH
+             "${LIB_UPPER} library (*.dll)"
+             FORCE)
+        get_filename_component (TBB_DLL_FILE_DIRECTORY "${TBB_DLL_FILE}" DIRECTORY)
+        set (3RDPARTY_${LIB_UPPER}_DLL_DIR
+             "${TBB_DLL_FILE_DIRECTORY}"
+             CACHE PATH
+             "The directory containing ${LIB_UPPER} library (*.dll)"
+             FORCE)
+        list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${LIB_UPPER}_DLL_DIR}")
+      else()
+        list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${LIB_UPPER}_DLL_DIR)
+      endif()
 
-    if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}")
-      get_filename_component (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}" PATH)
-      set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
-    else()
-      set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR "" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
-    endif()
-  endif()
+      # install *.dll (tbb & tbbmalloc)
+      if (INSTALL_TBB)
+        OCCT_MAKE_OS_WITH_BITNESS()
+        OCCT_MAKE_COMPILER_SHORT_NAME()
 
-  if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
-    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
-  else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)
-
-    set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY "" CACHE FILEPATH "The path to ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
-  endif()
-
-  # tbb/tbbmalloc shared library
-  if (WIN32)
-    if (NOT 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL OR NOT EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}")
-      set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
-      set (PRODUCT_PATH_SUFFIXES bin)
-
-      # set 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL
-      set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL "3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL-NOTFOUND" CACHE FILEPATH "${upper_PRODUCT_LIBRARY_NAME} shared library" FORCE)
-
-      if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
-        if (NOT EXISTS "${3RDPARTY_TBB_DIR}/bin/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/${COMPILER}")
-          if (EXISTS "${3RDPARTY_TBB_DIR}/bin/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}")
-            file (GLOB ${upper_PRODUCT_LIBRARY_NAME}_COMPILER_LIST "${3RDPARTY_TBB_DIR}/bin/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/*")
-            if (${upper_PRODUCT_LIBRARY_NAME}_COMPILER_LIST)
-              list (GET ${upper_PRODUCT_LIBRARY_NAME}_COMPILER_LIST -1 THE_MOST_FRESH_COMPILER_VERSION)
-              if (THE_MOST_FRESH_COMPILER_VERSION)
-                get_filename_component (THE_MOST_FRESH_COMPILER_VERSION_NAME "${THE_MOST_FRESH_COMPILER_VERSION}" NAME)
-                set (PRODUCT_PATH_SUFFIXES bin bin/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/${THE_MOST_FRESH_COMPILER_VERSION_NAME})
-              endif()
-            endif()
-          endif()
+        if (SINGLE_GENERATOR)
+          install (FILES ${3RDPARTY_${LIB_UPPER}_DLL} DESTINATION "${INSTALL_DIR_BIN}")
         else()
-          set (PRODUCT_PATH_SUFFIXES bin bin/${${upper_PRODUCT_LIBRARY_NAME}_ARCH_NAME}/${COMPILER})
-        endif()
-
-        if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
-          find_library (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL ${PRODUCT_LIBRARY_NAME}
-                                         PATHS "${3RDPARTY_TBB_DIR}"
-                                         PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES}
-                                         NO_DEFAULT_PATH)
-        else()
-          find_library (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL ${PRODUCT_LIBRARY_NAME} PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES})
-        endif()
-
-        if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}")
-          get_filename_component (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}" PATH)
-          set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
-        else()
-          set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR "" CACHE PATH "The directory containing ${upper_PRODUCT_LIBRARY_NAME} shared library" FORCE)
-
-          set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL "" CACHE FILEPATH "${upper_PRODUCT_LIBRARY_NAME} shared library" FORCE)
+          install (FILES ${3RDPARTY_${LIB_UPPER}_DLL} CONFIGURATIONS Release DESTINATION "${INSTALL_DIR_BIN}")
+          install (FILES ${3RDPARTY_${LIB_UPPER}_DLL} CONFIGURATIONS RelWithDebInfo DESTINATION "${INSTALL_DIR_BIN}i")
+          install (FILES ${3RDPARTY_${LIB_UPPER}_DLL} CONFIGURATIONS Debug DESTINATION "${INSTALL_DIR_BIN}d")
         endif()
       endif()
-    endif()
-
-    if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR OR EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
-      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
+      mark_as_advanced (3RDPARTY_${LIB_UPPER}_LIBRARY 3RDPARTY_${LIB_UPPER}_DLL)
+    endforeach()
+    if (INSTALL_TBB)
+      set (USED_3RDPARTY_TBB_DIR "")
     else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
+      # the *.dll/*.so* directory for using by the executable
+      set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_DLL_DIR})
     endif()
+  else()
+    message (FATAL_ERROR "Installation directory with TBB is not exist.")
+  endif()
+else ()
+  # NOT WIN32 branch
+  if ((DEFINED 3RDPARTY_DIR) AND (NOT "${3RDPARTY_DIR}" STREQUAL "") AND (EXISTS "${3RDPARTY_DIR}"))
+    # Here, we have correct 3RDPARTY_DIR.
+    # Trying to specify TBB folder in connection with 3RDPARTY_DIR
+    if (("${3RDPARTY_TBB_DIR}" STREQUAL "") OR (NOT EXISTS "${3RDPARTY_TBB_DIR}"))
+      FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" TBB TBB_DIR_NAME)
+      if (TBB_DIR_NAME)
+        set (3RDPARTY_TBB_DIR "${3RDPARTY_DIR}/${TBB_DIR_NAME}" CACHE PATH "The directory containing tbb" FORCE)
+      endif()
+    endif()
+    if ((NOT "${3RDPARTY_TBB_DIR}" STREQUAL "") AND (EXISTS "${3RDPARTY_TBB_DIR}"))
+      # Find TBB 2021.5 in existing directory.
+      find_package (
+      TBB 2021.5
+      PATHS "${3RDPARTY_TBB_DIR}" NO_DEFAULT_PATH
+      REQUIRED
+      CONFIG)
+    else()
+      # Find TBB 2021.5 in system directory.
+      find_package (
+      TBB 2021.5
+      REQUIRED
+      CONFIG)
+    endif()
+  else()
+    # Find TBB 2021.5 in system directory.
+    find_package (
+    TBB 2021.5
+    REQUIRED
+    CONFIG)
+  endif()
+  # TBB has been configured (in other case FATAL_ERROR occurs).
+
+  # Archive include directory.
+  get_target_property (TBB_INCLUDE_DIR TBB::tbb INTERFACE_INCLUDE_DIRECTORIES)
+  if (NOT DEFINED 3RDPARTY_TBB_INCLUDE_DIR)
+    set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE PATH "The directory containing headers of the TBB")
+  endif()
+  if (EXISTS "${TBB_INCLUDE_DIR}")
+    set (3RDPARTY_TBB_INCLUDE_DIR "${TBB_INCLUDE_DIR}" CACHE PATH "The directory containing headers of the TBB" FORCE)
+    list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_TBB_INCLUDE_DIR}")
+  else()
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TBB_INCLUDE_DIR)
   endif()
 
-  # install tbb/tbbmalloc
-  if (INSTALL_TBB)
-    OCCT_MAKE_OS_WITH_BITNESS()
-    OCCT_MAKE_COMPILER_SHORT_NAME()
+  # Get installed configuration of tbb
+  get_target_property (TARGET_TBB_IMPORT_CONFS TBB::tbb IMPORTED_CONFIGURATIONS)
+  list (GET TARGET_TBB_IMPORT_CONFS 0 CHOSEN_IMPORT_CONF)
 
-    if (WIN32)
-      if (SINGLE_GENERATOR)
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL} DESTINATION "${INSTALL_DIR_BIN}")
-      else()
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR_BIN}")
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR_BIN}i")
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL}
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR_BIN}d")
-      endif()
-    else()
-      get_filename_component (PRODUCT_LIBRARY_NAME ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY} NAME)
-
-      if (SINGLE_GENERATOR)
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}.2
-                 DESTINATION "${INSTALL_DIR_LIB}"
-                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
-      else()
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}.2
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR_LIB}"
-                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}.2
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR_LIB}i"
-                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
-        install (FILES ${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY}.2
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR_LIB}d"
-                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
-      endif()
-    endif()
-  endif()
-  mark_as_advanced (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL)
-endmacro()
-
-#if (BUILD_SHARED_LIBS)
   separate_arguments (CSF_TBB)
   foreach (LIB IN LISTS CSF_TBB)
-    TBB_PRODUCT_SEARCH (${LIB})
-  endforeach()
+    string(TOLOWER "${LIB}" LIB_LOWER)
+    string(TOUPPER "${LIB}" LIB_UPPER)
 
+    # Archive *.so files and directory containing it.
+    get_target_property (TBB_SO_FILE "TBB::${LIB_LOWER}" IMPORTED_LOCATION_${CHOSEN_IMPORT_CONF})
+    # Reserve cache variable for *.so.
+    if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_LIBRARY)
+      set (3RDPARTY_${LIB_UPPER}_LIBRARY "" CACHE FILEPATH "${LIB_UPPER} library (*.so)")
+    endif()
+    # Reserve cache variable for directory containing *.so file.
+    if (NOT DEFINED 3RDPARTY_${LIB_UPPER}_LIBRARY_DIR)
+      set (3RDPARTY_${LIB_UPPER}_LIBRARY_DIR "" CACHE PATH "The directory containing ${LIB_UPPER} library (*.so)")
+    endif()
+    if (EXISTS "${TBB_SO_FILE}")
+      set (3RDPARTY_${LIB_UPPER}_LIBRARY
+           "${TBB_SO_FILE}"
+           CACHE FILEPATH
+           "${LIB_UPPER} library (*.so)"
+           FORCE)
+      get_filename_component (TBB_SO_FILE_DIRECTORY "${TBB_SO_FILE}" DIRECTORY)
+      set (3RDPARTY_${LIB_UPPER}_LIBRARY_DIR
+           "${TBB_SO_FILE_DIRECTORY}"
+           CACHE PATH
+           "The directory containing ${LIB_UPPER} library (*.so)"
+           FORCE)
+      list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${LIB_UPPER}_LIBRARY_DIR}")
+    else()
+      list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${LIB_UPPER}_LIBRARY_DIR)
+    endif()
+
+    # install *.so* (tbb & tbbmalloc)
+    if (INSTALL_TBB)
+      OCCT_MAKE_OS_WITH_BITNESS()
+      OCCT_MAKE_COMPILER_SHORT_NAME()
+
+      if (SINGLE_GENERATOR)
+        install (FILES ${3RDPARTY_${LIB_UPPER}_LIBRARY} DESTINATION "${INSTALL_DIR_LIB}")
+      else()
+        install (FILES ${3RDPARTY_${LIB_UPPER}_LIBRARY} CONFIGURATIONS Release DESTINATION "${INSTALL_DIR_LIB}")
+        install (FILES ${3RDPARTY_${LIB_UPPER}_LIBRARY} CONFIGURATIONS RelWithDebInfo DESTINATION "${INSTALL_DIR_LIB}i")
+        install (FILES ${3RDPARTY_${LIB_UPPER}_LIBRARY} CONFIGURATIONS Debug DESTINATION "${INSTALL_DIR_LIB}d")
+      endif()
+    endif()
+  endforeach()
   if (INSTALL_TBB)
     set (USED_3RDPARTY_TBB_DIR "")
   else()
-    # the library directory for using by the executable
-    if (WIN32)
-      set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_DLL_DIR})
-    else()
-      set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_LIBRARY_DIR})
-    endif()
+    # the *.so* directory for using by the executable
+    set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_LIBRARY_DIR})
   endif()
-#endif()
+endif()

adm/cmake/vardescr.cmake

@@ -28,6 +28,9 @@ Applies only for Debug configuration.")
 set (BUILD_SHARED_LIBRARY_NAME_POSTFIX_DESCR
 "Append the postfix to names of output libraries")
 
+set (BUILD_SOVERSION_NUMBERS_DESCR
+"Version numbers to put into SONAME: 0 - for empty, 1 - for major, 2 - for major.minor, 3 - for major.minor.maintenance")
+
 set (BUILD_RELEASE_DISABLE_EXCEPTIONS_DESCR
 "Disables exceptions like Standard_OutOfRange in Release builds.
 Defines No_Exception macros for Release builds when enabled (default).
@@ -45,6 +48,11 @@ set (BUILD_USE_PCH_DESCR
 "Use precompiled headers to accelerate the build.
 Precompiled headers are generated automatically by Cotire tool.")
 
+set (BUILD_INCLUDE_SYMLINK_DESCR
+"Include symbolic links to the source files in the build directory.
+OFF - using a reference file with direct include to the origin,
+ON - symbolic link to the origin file are created")
+
 # install variables
 set (INSTALL_DIR_DESCR 
 "The place where built OCCT libraries, headers, test cases (INSTALL_TEST_CASES variable),
@@ -113,6 +121,7 @@ endmacro()
 
 BUILD_MODULE_MESSAGE (BUILD_MODULE_ApplicationFramework "ApplicationFramework")
 BUILD_MODULE_MESSAGE (BUILD_MODULE_DataExchange         "DataExchange")
+BUILD_MODULE_MESSAGE (BUILD_MODULE_DETools              "DETools")
 BUILD_MODULE_MESSAGE (BUILD_MODULE_Draw                 "Draw")
 BUILD_MODULE_MESSAGE (BUILD_MODULE_FoundationClasses    "FoundationClasses")
 BUILD_MODULE_MESSAGE (BUILD_MODULE_ModelingAlgorithms   "ModelingAlgorithms")

adm/cmake/vtk.cmake

@@ -200,7 +200,7 @@ endif()
 
 if (3RDPARTY_VTK_INCLUDE_DIR AND EXISTS "${3RDPARTY_VTK_INCLUDE_DIR}")
   list (APPEND 3RDPARTY_INCLUDE_DIRS ${3RDPARTY_VTK_INCLUDE_DIR})
-else()
+elseif (NOT VTK_FOUND)
   list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_INCLUDE_DIR)
 endif()
 

adm/genconf.tcl

@@ -1,748 +0,0 @@
-#!/usr/bin/tclsh
-
-# =======================================================================
-# Created on: 2012-01-26
-# Created by: Kirill GAVRILOV
-# Copyright (c) 2012 OPEN CASCADE SAS
-#
-# This file is part of Open CASCADE Technology software library.
-#
-# This library is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Lesser General Public License version 2.1 as published
-# by the Free Software Foundation, with special exception defined in the file
-# OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
-# distribution for complete text of the license and disclaimer of any warranty.
-#
-# Alternatively, this file may be used under the terms of Open CASCADE
-# commercial license or contractual agreement.
-
-# =======================================================================
-# GUI procedure for search of third-party tools and generation of environment
-# customization script
-# =======================================================================
-
-# load tools
-source [file join [file dirname [info script]] genconfdeps.tcl]
-
-# proxy variable for implicit file path normalization
-set PRODUCTS_PATH_INPUT "$::PRODUCTS_PATH"
-
-package require Tk
-
-set aRowIter 0
-set aCheckRowIter 0
-frame .myFrame -padx 5 -pady 5
-pack  .myFrame -fill both -expand 1
-frame .myFrame.myPrjFrame
-frame .myFrame.myVsFrame
-frame .myFrame.myHxxChecks
-frame .myFrame.myChecks
-
-# project file format
-set SYS_PRJFMT_LIST {}
-set SYS_PRJNAME_LIST {}
-if { "$::tcl_platform(platform)" == "windows" } {
-  lappend ::SYS_PRJFMT_LIST "vcxproj"
-  lappend ::SYS_PRJNAME_LIST "Visual Studio (.vcxproj)"
-}
-if { "$tcl_platform(os)" == "Darwin" } {
-  lappend ::SYS_PRJFMT_LIST "xcd"
-  lappend ::SYS_PRJNAME_LIST "XCode (.xcd)"
-}
-lappend ::SYS_PRJFMT_LIST "cbp"
-lappend ::SYS_PRJNAME_LIST "Code Blocks (.cbp)"
-lappend ::SYS_PRJFMT_LIST "pro"
-lappend ::SYS_PRJNAME_LIST "Qt Creator (.pro)"
-
-set aPrjIndex [lsearch $::SYS_PRJFMT_LIST $::PRJFMT]
-set ::PRJNAME [lindex $::SYS_PRJNAME_LIST $aPrjIndex]
-set ::CONFIG "Release"
-
-set SYS_VS_LIST {}
-set SYS_VC_LIST {}
-set SYS_VCVARS_LIST {}
-
-# detect installed Visual Studio 2017+ instances by running vswhere.exe
-if { ! [catch {exec vswhere.exe -version "\[15.0,15.99\]" -latest -requires Microsoft.VisualStudio.Workload.NativeDesktop -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2017 (15, toolset v141)"
-  lappend ::SYS_VC_LIST "vc141"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\Auxiliary\\Build\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[15.0,15.99\]" -latest -requires Microsoft.VisualStudio.Workload.Universal -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2017 (15, toolset v141) UWP"
-  lappend ::SYS_VC_LIST "vc141-uwp"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\Auxiliary\\Build\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[16.0,16.99\]" -latest -requires Microsoft.VisualStudio.Workload.NativeDesktop -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2019 (16, toolset v142)"
-  lappend ::SYS_VC_LIST "vc142"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\Auxiliary\\Build\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[16.0,16.99\]" -latest -requires Microsoft.VisualStudio.Workload.Universal -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2019 (16, toolset v142) UWP"
-  lappend ::SYS_VC_LIST "vc142-uwp"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\Auxiliary\\Build\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[16.0,16.99\]" -latest -requires Microsoft.VisualStudio.Component.VC.ClangCL -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2019 (16, toolset ClangCL)"
-  lappend ::SYS_VC_LIST "vclang"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\Auxiliary\\Build\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[17.0,17.99\]" -latest -requires Microsoft.VisualStudio.Workload.NativeDesktop -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2022 (17, toolset v143)"
-  lappend ::SYS_VC_LIST "vc143"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\Auxiliary\\Build\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[17.0,17.99\]" -latest -requires Microsoft.VisualStudio.Workload.Universal -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2022 (17, toolset v143) UWP"
-  lappend ::SYS_VC_LIST "vc143-uwp"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\Auxiliary\\Build\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[17.0,17.99\]" -latest -requires Microsoft.VisualStudio.Component.VC.ClangCL -property installationPath} res] && "$res" != "" } {
-  lappend ::SYS_VS_LIST "Visual Studio 2022 (17, toolset ClangCL)"
-  lappend ::SYS_VC_LIST "vclang"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\Auxiliary\\Build\\vcvarsall.bat"
-}
-
-# detect installed Visual Studio instances from global environment
-if { [info exists ::env(VS140COMNTOOLS)] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2015 (14, toolset v140)"
-  lappend ::SYS_VC_LIST "vc14"
-  lappend ::SYS_VCVARS_LIST "%VS140COMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-
-  lappend ::SYS_VS_LIST "Visual Studio 2015 (14, toolset v140) UWP"
-  lappend ::SYS_VC_LIST "vc14-uwp"
-  lappend ::SYS_VCVARS_LIST "%VS140COMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-}
-if { [info exists ::env(VS120COMNTOOLS)] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2013 (12, toolset v120)"
-  lappend ::SYS_VC_LIST "vc12"
-  lappend ::SYS_VCVARS_LIST "%VS120COMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-}
-if { [info exists ::env(VS110COMNTOOLS)] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2012 (11, toolset v110)"
-  lappend ::SYS_VC_LIST "vc11"
-  lappend ::SYS_VCVARS_LIST "%VS110COMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-}
-if { [info exists ::env(VS100COMNTOOLS)] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2010 (10, toolset v100)"
-  lappend ::SYS_VC_LIST "vc10"
-  lappend ::SYS_VCVARS_LIST "%VS100COMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-}
-if { [info exists ::env(VS90COMNTOOLS)] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2008 (9, toolset v90)"
-  lappend ::SYS_VC_LIST "vc9"
-  lappend ::SYS_VCVARS_LIST "%VS90COMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-}
-if { [info exists ::env(VS80COMNTOOLS)] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2005 (8, toolset v80)"
-  lappend ::SYS_VC_LIST "vc8"
-  lappend ::SYS_VCVARS_LIST "%VS80COMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-}
-lappend ::SYS_VS_LIST "Custom"
-lappend ::SYS_VC_LIST "vcX"
-lappend ::SYS_VCVARS_LIST "%VSXXCOMNTOOLS%..\\..\\VC\\vcvarsall.bat"
-
-set aVcVerIndex [lsearch $::SYS_VC_LIST $::VCVER]
-set ::VSVER  [lindex $::SYS_VS_LIST     $aVcVerIndex]
-if { "$::VCVARS" == "" } {
-  set ::VCVARS [lindex $::SYS_VCVARS_LIST $aVcVerIndex]
-}
-
-proc wokdep:gui:Close {} {
-  # if changed ask
-  exit
-}
-
-proc wokdep:gui:configSuffix {} {
-  if { "$::CONFIG" == "Debug" } {
-    return "D"
-  }
-  return ""
-}
-
-proc wokdep:gui:SwitchConfig {} {
-  set ::PRJFMT [lindex $::SYS_PRJFMT_LIST [.myFrame.myPrjFrame.myPrjCombo current]]
-  set ::VCVER  [lindex $::SYS_VC_LIST     [.myFrame.myVsFrame.myVsCombo current]]
-  set ::VCVARS [lindex $::SYS_VCVARS_LIST [.myFrame.myVsFrame.myVsCombo current]]
-
-  set ::CSF_OPT_INC {}
-  set ::CSF_OPT_LIB32 {}
-  set ::CSF_OPT_LIB64 {}
-  set ::CSF_OPT_BIN32 {}
-  set ::CSF_OPT_BIN64 {}
-  set ::CSF_OPT_LIB32D {}
-  set ::CSF_OPT_LIB64D {}
-  set ::CSF_OPT_BIN32D {}
-  set ::CSF_OPT_BIN64D {}
-  wokdep:gui:UpdateList
-}
-
-proc wokdep:gui:SwitchArch {} {
-  wokdep:gui:Show3264Bitness ::aRowIter
-
-  if { [llength [grid info .myFrame.mySave]] != 0 } {
-    grid forget .myFrame.mySave .myFrame.myClose
-  }
-
-  # Bottom section
-  grid .myFrame.mySave  -row $::aRowIter -column 4 -columnspan 2
-  grid .myFrame.myClose -row $::aRowIter -column 6 -columnspan 2
-}
-
-# update label text and visibility
-font create wokdep:gui:EmptyFont -size -1
-proc wokdep:gui:SetLabelText {theLabel theText} {
-  set aFont TkDefaultFont
-  if { $theText == "" } {
-    set aFont wokdep:gui:EmptyFont
-  }
-  $theLabel configure -text $theText -font $aFont
-}
-
-proc wokdep:gui:UpdateList {} {
-  set anIncErrs   {}
-  set anLib32Errs {}
-  set anLib64Errs {}
-  set anBin32Errs {}
-  set anBin64Errs {}
-  wokdep:SearchTclTk     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  if { "$::HAVE_FREETYPE" == "true" } {
-    wokdep:SearchFreeType anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-  wokdep:SearchX11       anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  if { "$::HAVE_GLES2" == "true" } {
-    wokdep:SearchEGL     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-    wokdep:SearchGLES    anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-  if { "$::HAVE_FREEIMAGE" == "true" } {
-    wokdep:SearchFreeImage anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-  if { "$::HAVE_FFMPEG" == "true" } {
-    wokdep:SearchFFmpeg  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-  if { "$::HAVE_OPENVR" == "true" } {
-    wokdep:SearchOpenVR  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-  if { "$::HAVE_TBB" == "true" } {
-    wokdep:SearchTBB     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-#  if { "$::HAVE_OPENCL" == "true" } {
-#    wokdep:SearchOpenCL  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-#  }
-  if { "$::HAVE_VTK" == "true" } {
-    wokdep:SearchVTK  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-
-  if { "$::HAVE_ZLIB" == "true" } {
-    set aCheckLib "z"
-    if { "$::tcl_platform(platform)" == "windows" } {
-      set aCheckLib "zlib"
-    }
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "zlib" "zlib.h" "$aCheckLib" {"zlib"}
-  }
-  if { "$::HAVE_LIBLZMA" == "true" } {
-    set aCheckLib "lzma"
-    if { "$::tcl_platform(platform)" == "windows" } {
-      set aCheckLib "liblzma"
-    }
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "liblzma" "lzma.h" "$aCheckLib" {"lzma" "xz"}
-  }
-  if { "$::HAVE_E57" == "true" } {
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "e57" "e57/E57Foundation.h" "E57RefImpl" {"e57"}
-    set aCheckLib "xerces-c"
-    if { "$::tcl_platform(platform)" == "windows" } {
-      set aCheckLib "xerces-c_3"
-    }
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "xerces-c" "xercesc/sax2/XMLReaderFactory.hpp" "$aCheckLib" {"xerces"}
-  }
-  if { "$::HAVE_RAPIDJSON" == "true" } {
-    wokdep:SearchRapidJson anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-  if { "$::HAVE_DRACO" == "true" } {
-    set aDummy {}
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs aDummy aDummy "draco" "draco/compression/decode.h" "draco" {"draco"}
-  }
-
-  if {"$::BUILD_Inspector" == "true" } {
-    set ::CHECK_QT "true"
-  }
-
-  if { "$::CHECK_QT" == "true" } {
-    wokdep:SearchQt     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-
-  if { "$::CHECK_JDK" == "true" } {
-    wokdep:SearchJDK     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }
-
-  wokdep:gui:SetLabelText .myFrame.myIncErrLbl [join $anIncErrs   "\n"]
-
-  wokdep:gui:SetLabelText .myFrame.myIncErrLbl     [join $anIncErrs   "\n"]
-  wokdep:gui:SetLabelText .myFrame.myLib32_ErrLbl  [join $anLib32Errs "\n"]
-  wokdep:gui:SetLabelText .myFrame.myLib64_ErrLbl  [join $anLib64Errs "\n"]
-  wokdep:gui:SetLabelText .myFrame.myBin32_ErrLbl  [join $anBin32Errs "\n"]
-  wokdep:gui:SetLabelText .myFrame.myBin64_ErrLbl  [join $anBin64Errs "\n"]
-
-  wokdep:gui:SetLabelText .myFrame.myLib32D_ErrLbl [join $anLib32Errs "\n"]
-  wokdep:gui:SetLabelText .myFrame.myLib64D_ErrLbl [join $anLib64Errs "\n"]
-  wokdep:gui:SetLabelText .myFrame.myBin32D_ErrLbl [join $anBin32Errs "\n"]
-  wokdep:gui:SetLabelText .myFrame.myBin64D_ErrLbl [join $anBin64Errs "\n"]
-
-  # merge duplicates
-  set ::CSF_OPT_LIB32  [lsort -unique $::CSF_OPT_LIB32]
-  set ::CSF_OPT_LIB64  [lsort -unique $::CSF_OPT_LIB64]
-  set ::CSF_OPT_BIN32  [lsort -unique $::CSF_OPT_BIN32]
-  set ::CSF_OPT_BIN64  [lsort -unique $::CSF_OPT_BIN64]
-  set ::CSF_OPT_LIB32D [lsort -unique $::CSF_OPT_LIB32D]
-  set ::CSF_OPT_LIB64D [lsort -unique $::CSF_OPT_LIB64D]
-  set ::CSF_OPT_BIN32D [lsort -unique $::CSF_OPT_BIN32D]
-  set ::CSF_OPT_BIN64D [lsort -unique $::CSF_OPT_BIN64D]
-}
-
-proc wokdep:gui:BrowseVcVars {} {
-  set aResult [tk_chooseDirectory -initialdir $::VCVARS -title "Choose a directory"]
-  if { "$aResult" != "" } {
-    set ::VCVARS $aResult
-  }
-}
-
-proc wokdep:gui:BrowsePartiesRoot {} {
-  set aResult [tk_chooseDirectory -initialdir $::PRODUCTS_PATH_INPUT -title "Choose a directory"]
-  if { "$aResult" != "" } {
-    set ::PRODUCTS_PATH_INPUT $aResult
-    wokdep:gui:UpdateList
-  }
-}
-
-proc wokdep:gui:AddIncPath {} {
-  set aResult [tk_chooseDirectory -title "Choose a directory"]
-  if { "$aResult" != "" } {
-    lappend ::CSF_OPT_INC "$aResult"
-    wokdep:gui:UpdateList
-  }
-}
-
-proc wokdep:gui:AddLibPath {} {
-  set aCfg [wokdep:gui:configSuffix]
-  set aResult [tk_chooseDirectory -title "Choose a directory"]
-  if { "$aResult" != "" } {
-    lappend ::CSF_OPT_LIB${::ARCH}${aCfg} "$aResult"
-    wokdep:gui:UpdateList
-  }
-}
-
-proc wokdep:gui:AddBinPath {} {
-  set aCfg [wokdep:gui:configSuffix]
-  set aResult [tk_chooseDirectory -title "Choose a directory"]
-  if { "$aResult" != "" } {
-    lappend ::CSF_OPT_BIN${::ARCH}${aCfg} "$aResult"
-    wokdep:gui:UpdateList
-  }
-}
-
-proc wokdep:gui:RemoveIncPath {} {
-  set aSelIndices [.myFrame.myIncList curselection]
-  if { [llength $aSelIndices] != 0 } {
-    .myFrame.myIncList delete [lindex $aSelIndices 0]
-  }
-  wokdep:gui:UpdateList
-}
-
-proc wokdep:gui:RemoveLibPath {} {
-  set aCfg [wokdep:gui:configSuffix]
-  set aSelIndices [.myFrame.myLib${::ARCH}${aCfg}_List curselection]
-  if { [llength $aSelIndices] != 0 } {
-    .myFrame.myLib${::ARCH}${aCfg}_List delete [lindex $aSelIndices 0]
-  }
-  wokdep:gui:UpdateList
-}
-
-proc wokdep:gui:RemoveBinPath {} {
-  set aCfg [wokdep:gui:configSuffix]
-  set aSelIndices [.myFrame.myBin${::ARCH}${aCfg}_List curselection]
-  if { [llength $aSelIndices] != 0 } {
-    .myFrame.myBin${::ARCH}${aCfg}_List delete [lindex $aSelIndices 0]
-  }
-  wokdep:gui:UpdateList
-}
-
-proc wokdep:gui:ResetIncPath {} {
-  set ::CSF_OPT_INC {}
-  wokdep:gui:UpdateList
-}
-
-proc wokdep:gui:ResetLibPath {} {
-  set ::CSF_OPT_LIB${::ARCH}  {}
-  set ::CSF_OPT_LIB${::ARCH}D {}
-  set ::CSF_OPT_BIN${::ARCH}  {}
-  set ::CSF_OPT_BIN${::ARCH}D {}
-  wokdep:gui:UpdateList
-}
-
-proc wokdep:gui:Show3264Bitness { theRowIter } {
-  upvar $theRowIter aRowIter
-
-  set aArchOld ""
-  set aCfg [wokdep:gui:configSuffix]
-  if { "$::ARCH" == "32" } {
-    set aArchOld "64"
-  } else {
-    set aArchOld "32"
-  }
-
-  set aCfgOld "D"
-  if { "$::CONFIG" == "Debug" } { set aCfgOld "" }
-  set aDelArch ${aArchOld}${aCfg}
-  if { [llength [grid info .myFrame.myLib${aDelArch}_Lbl]] != 0 } {
-    grid forget .myFrame.myLib${aDelArch}_Lbl .myFrame.myLib${aDelArch}_List   .myFrame.myLib${aDelArch}_Scrl
-    grid forget .myFrame.myLib${aDelArch}_Add .myFrame.myLib${aDelArch}_Remove .myFrame.myLib${aDelArch}_Clear .myFrame.myLib${aDelArch}_ErrLbl
-    grid forget .myFrame.myBin${aDelArch}_Lbl .myFrame.myBin${aDelArch}_List   .myFrame.myBin${aDelArch}_Scrl
-    grid forget .myFrame.myBin${aDelArch}_Add .myFrame.myBin${aDelArch}_Remove .myFrame.myBin${aDelArch}_Clear .myFrame.myBin${aDelArch}_ErrLbl
-  }
-  set aDelCfg ${::ARCH}${aCfgOld}
-  if { [llength [grid info .myFrame.myLib${aDelCfg}_Lbl]] != 0 } {
-    grid forget .myFrame.myLib${aDelCfg}_Lbl .myFrame.myLib${aDelCfg}_List   .myFrame.myLib${aDelCfg}_Scrl
-    grid forget .myFrame.myLib${aDelCfg}_Add .myFrame.myLib${aDelCfg}_Remove .myFrame.myLib${aDelCfg}_Clear .myFrame.myLib${aDelCfg}_ErrLbl
-    grid forget .myFrame.myBin${aDelCfg}_Lbl .myFrame.myBin${aDelCfg}_List   .myFrame.myBin${aDelCfg}_Scrl
-    grid forget .myFrame.myBin${aDelCfg}_Add .myFrame.myBin${aDelCfg}_Remove .myFrame.myBin${aDelCfg}_Clear .myFrame.myBin${aDelCfg}_ErrLbl
-  }
-
-  set aNewCfg ${::ARCH}${aCfg}
-  # Additional libraries search paths
-  grid .myFrame.myLib${aNewCfg}_Lbl    -row $aRowIter -column 0 -columnspan 10 -sticky w
-  incr aRowIter
-  grid .myFrame.myLib${aNewCfg}_List   -row $aRowIter -column 0 -rowspan 4 -columnspan 5
-  grid .myFrame.myLib${aNewCfg}_Scrl   -row $aRowIter -column 5 -rowspan 4
-  grid .myFrame.myLib${aNewCfg}_Add    -row $aRowIter -column 6
-  incr aRowIter
-  #grid .myFrame.myLib${aNewCfg}_Edit   -row $aRowIter -column 6
-  incr aRowIter
-  grid .myFrame.myLib${aNewCfg}_Remove -row $aRowIter -column 6
-  incr aRowIter
-  grid .myFrame.myLib${aNewCfg}_Clear  -row $aRowIter -column 6
-  incr aRowIter
-  grid .myFrame.myLib${aNewCfg}_ErrLbl -row $aRowIter -column 0 -columnspan 10 -sticky w
-  incr aRowIter
-
-  # Additional executables search paths
-  grid .myFrame.myBin${aNewCfg}_Lbl    -row $aRowIter -column 0 -columnspan 10 -sticky w
-  incr aRowIter
-  grid .myFrame.myBin${aNewCfg}_List   -row $aRowIter -column 0 -rowspan 4 -columnspan 5
-  grid .myFrame.myBin${aNewCfg}_Scrl   -row $aRowIter -column 5 -rowspan 4
-  grid .myFrame.myBin${aNewCfg}_Add    -row $aRowIter -column 6
-  incr aRowIter
-  #grid .myFrame.myBin${aNewCfg}_Edit   -row $aRowIter -column 6
-  incr aRowIter
-  grid .myFrame.myBin${aNewCfg}_Remove -row $aRowIter -column 6
-  incr aRowIter
-  grid .myFrame.myBin${aNewCfg}_Clear  -row $aRowIter -column 6
-  incr aRowIter
-  grid .myFrame.myBin${aNewCfg}_ErrLbl -row $aRowIter -column 0 -columnspan 10 -sticky w
-  incr aRowIter
-}
-
-# Header
-ttk::label    .myFrame.myPrjFrame.myPrjLbl     -text "Project format:" -padding {5 5 20 5}
-ttk::combobox .myFrame.myPrjFrame.myPrjCombo   -values $SYS_PRJNAME_LIST -state readonly -textvariable PRJNAME -width 40
-ttk::label    .myFrame.myVsFrame.myVsLbl       -text "Visual Studio configuration:" -padding {5 5 20 5}
-ttk::combobox .myFrame.myVsFrame.myVsCombo     -values $SYS_VS_LIST -state readonly -textvariable VSVER -width 40
-ttk::combobox .myFrame.myVsFrame.myArchCombo   -values { {32} {64} } -textvariable ARCH -state readonly -width 6
-ttk::combobox .myFrame.myVsFrame.myConfigCombo -values { {Release} {Debug} } -textvariable CONFIG -state readonly -width 6
-entry         .myFrame.myVcEntry     -textvariable VCVER  -width 10
-entry         .myFrame.myVcVarsEntry -textvariable VCVARS -width 70
-ttk::button   .myFrame.myVcBrowseBtn -text "Browse" -command wokdep:gui:BrowseVcVars
-ttk::label    .myFrame.myHxxChecks.myRelDebInfoLbl   -text "Release with Debug info"
-checkbutton   .myFrame.myHxxChecks.myRelDebInfoCheck -offvalue "false" -onvalue "true" -variable HAVE_RelWithDebInfo
-
-#
-ttk::combobox .myFrame.myHxxChecks.myScutsCombo   -values { {ShortCut} {Copy} {HardLink} } -textvariable SHORTCUT_HEADERS -state readonly -width 12
-ttk::label    .myFrame.myHxxChecks.myScutsLbl     -text "Strategy for filling headers folder inc:"
-
-#
-ttk::label    .myFrame.mySrchLbl       -text "3rd-parties search path:" -padding {5 5 80 5}
-entry         .myFrame.mySrchEntry     -textvariable PRODUCTS_PATH_INPUT -width 80
-ttk::button   .myFrame.mySrchBrowseBtn -text "Browse" -command wokdep:gui:BrowsePartiesRoot
-checkbutton   .myFrame.myChecks.myFreeTypeCheck -offvalue "false" -onvalue "true" -variable HAVE_FREETYPE  -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myFreeTypeLbl   -text "Use FreeType"
-checkbutton   .myFrame.myChecks.myFImageCheck   -offvalue "false" -onvalue "true" -variable HAVE_FREEIMAGE -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myFImageLbl     -text "Use FreeImage"
-checkbutton   .myFrame.myChecks.myTbbCheck      -offvalue "false" -onvalue "true" -variable HAVE_TBB       -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myTbbLbl        -text "Use Intel TBB"
-checkbutton   .myFrame.myChecks.myOpenVrCheck   -offvalue "false" -onvalue "true" -variable HAVE_OPENVR    -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myOpenVrLbl     -text "Use OpenVR"
-if { "$::tcl_platform(os)" != "Darwin" } {
-  checkbutton .myFrame.myChecks.myGlesCheck     -offvalue "false" -onvalue "true" -variable HAVE_GLES2     -command wokdep:gui:UpdateList
-  ttk::label  .myFrame.myChecks.myGlesLbl       -text "Use OpenGL ES"
-}
-if { "$::tcl_platform(platform)" == "windows" } {
-  checkbutton .myFrame.myChecks.myD3dCheck      -offvalue "false" -onvalue "true" -variable HAVE_D3D       -command wokdep:gui:UpdateList
-  ttk::label  .myFrame.myChecks.myD3dLbl        -text "Use Direct3D"
-}
-checkbutton   .myFrame.myChecks.myFFmpegCheck   -offvalue "false" -onvalue "true" -variable HAVE_FFMPEG    -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myFFmpegLbl     -text "Use FFmpeg"
-#checkbutton   .myFrame.myChecks.myOpenClCheck   -offvalue "false" -onvalue "true" -variable HAVE_OPENCL    -command wokdep:gui:UpdateList
-#ttk::label    .myFrame.myChecks.myOpenClLbl     -text "Use OpenCL"
-checkbutton   .myFrame.myChecks.myRapidJsonCheck -offvalue "false" -onvalue "true" -variable HAVE_RAPIDJSON -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myRapidJsonLbl   -text "Use RapidJSON"
-checkbutton   .myFrame.myChecks.myDracoCheck    -offvalue "false" -onvalue "true" -variable HAVE_DRACO     -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myDracoLbl      -text "Use Draco"
-
-checkbutton   .myFrame.myChecks.myXLibCheck     -offvalue "false" -onvalue "true" -variable HAVE_XLIB
-ttk::label    .myFrame.myChecks.myXLibLbl       -text "Use X11 for windows drawing"
-ttk::label    .myFrame.myChecks.myVtkLbl        -text "Use VTK"
-checkbutton   .myFrame.myChecks.myVtkCheck      -offvalue "false" -onvalue "true" -variable HAVE_VTK       -command wokdep:gui:UpdateList
-
-checkbutton   .myFrame.myChecks.myZLibCheck     -offvalue "false" -onvalue "true" -variable HAVE_ZLIB      -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myZLibLbl       -text "Use zlib"
-checkbutton   .myFrame.myChecks.myLzmaCheck     -offvalue "false" -onvalue "true" -variable HAVE_LIBLZMA   -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myLzmaLbl       -text "Use liblzma"
-checkbutton   .myFrame.myChecks.myE57Check      -offvalue "false" -onvalue "true" -variable HAVE_E57       -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myE57Lbl        -text "Use E57"
-
-checkbutton   .myFrame.myChecks.myQtCheck       -offvalue "false" -onvalue "true" -variable CHECK_QT       -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myQtLbl         -text "Search Qt"
-checkbutton   .myFrame.myChecks.myJDKCheck      -offvalue "false" -onvalue "true" -variable CHECK_JDK      -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myJDKLbl        -text "Search JDK"
-
-if { "$::tcl_platform(platform)" == "windows" } {
-  checkbutton   .myFrame.myChecks.myInspectorBuild -offvalue "false" -onvalue "true" -variable BUILD_Inspector      -command wokdep:gui:UpdateList
-  ttk::label    .myFrame.myChecks.myInspectorLbl   -text "Build Inspector"
-}
-
-# Additional headers search paths
-ttk::label    .myFrame.myIncLbl    -text "Additional headers search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myIncScrl   -command ".myFrame.myIncList yview"
-listbox       .myFrame.myIncList   -listvariable CSF_OPT_INC -width 80 -height 5 -yscrollcommand ".myFrame.myIncScrl set"
-ttk::button   .myFrame.myIncAdd    -text "Add"     -command wokdep:gui:AddIncPath
-ttk::button   .myFrame.myIncEdit   -text "Edit"
-ttk::button   .myFrame.myIncRemove -text "Remove"  -command wokdep:gui:RemoveIncPath
-ttk::button   .myFrame.myIncClear  -text "Reset"   -command wokdep:gui:ResetIncPath
-ttk::label    .myFrame.myIncErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional libraries (32-bit) search paths
-ttk::label    .myFrame.myLib32_Lbl    -text "Additional libraries (32-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myLib32_Scrl   -command ".myFrame.myLib32_List yview"
-listbox       .myFrame.myLib32_List   -listvariable CSF_OPT_LIB32 -width 80 -height 5 -yscrollcommand ".myFrame.myLib32_Scrl set"
-ttk::button   .myFrame.myLib32_Add    -text "Add"     -command wokdep:gui:AddLibPath
-ttk::button   .myFrame.myLib32_Edit   -text "Edit"
-ttk::button   .myFrame.myLib32_Remove -text "Remove"  -command wokdep:gui:RemoveLibPath
-ttk::button   .myFrame.myLib32_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myLib32_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional debug libraries (32-bit) search paths
-ttk::label    .myFrame.myLib32D_Lbl    -text "Additional debug libraries (32-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myLib32D_Scrl   -command ".myFrame.myLib32D_List yview"
-listbox       .myFrame.myLib32D_List   -listvariable CSF_OPT_LIB32D -width 80 -height 5 -yscrollcommand ".myFrame.myLib32D_Scrl set"
-ttk::button   .myFrame.myLib32D_Add    -text "Add"     -command wokdep:gui:AddLibPath
-ttk::button   .myFrame.myLib32D_Edit   -text "Edit"
-ttk::button   .myFrame.myLib32D_Remove -text "Remove"  -command wokdep:gui:RemoveLibPath
-ttk::button   .myFrame.myLib32D_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myLib32D_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional libraries (64-bit) search paths
-ttk::label    .myFrame.myLib64_Lbl    -text "Additional libraries (64-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myLib64_Scrl   -command ".myFrame.myLib64_List yview"
-listbox       .myFrame.myLib64_List   -listvariable CSF_OPT_LIB64 -width 80 -height 5 -yscrollcommand ".myFrame.myLib64_Scrl set"
-ttk::button   .myFrame.myLib64_Add    -text "Add"     -command wokdep:gui:AddLibPath
-ttk::button   .myFrame.myLib64_Edit   -text "Edit"
-ttk::button   .myFrame.myLib64_Remove -text "Remove"  -command wokdep:gui:RemoveLibPath
-ttk::button   .myFrame.myLib64_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myLib64_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional debug libraries (64-bit) search paths
-ttk::label    .myFrame.myLib64D_Lbl    -text "Additional debug libraries (64-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myLib64D_Scrl   -command ".myFrame.myLib64D_List yview"
-listbox       .myFrame.myLib64D_List   -listvariable CSF_OPT_LIB64D -width 80 -height 5 -yscrollcommand ".myFrame.myLib64D_Scrl set"
-ttk::button   .myFrame.myLib64D_Add    -text "Add"     -command wokdep:gui:AddLibPath
-ttk::button   .myFrame.myLib64D_Edit   -text "Edit"
-ttk::button   .myFrame.myLib64D_Remove -text "Remove"  -command wokdep:gui:RemoveLibPath
-ttk::button   .myFrame.myLib64D_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myLib64D_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional executables (32-bit) search paths
-ttk::label    .myFrame.myBin32_Lbl    -text "Additional executables (32-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myBin32_Scrl   -command ".myFrame.myBin32_List yview"
-listbox       .myFrame.myBin32_List   -listvariable CSF_OPT_BIN32 -width 80 -height 5 -yscrollcommand ".myFrame.myBin32_Scrl set"
-ttk::button   .myFrame.myBin32_Add    -text "Add"     -command wokdep:gui:AddBinPath
-ttk::button   .myFrame.myBin32_Edit   -text "Edit"
-ttk::button   .myFrame.myBin32_Remove -text "Remove"  -command wokdep:gui:RemoveBinPath
-ttk::button   .myFrame.myBin32_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myBin32_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional debug executables (32-bit) search paths
-ttk::label    .myFrame.myBin32D_Lbl    -text "Additional debug executables (32-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myBin32D_Scrl   -command ".myFrame.myBin32D_List yview"
-listbox       .myFrame.myBin32D_List   -listvariable CSF_OPT_BIN32D -width 80 -height 5 -yscrollcommand ".myFrame.myBin32D_Scrl set"
-ttk::button   .myFrame.myBin32D_Add    -text "Add"     -command wokdep:gui:AddBinPath
-ttk::button   .myFrame.myBin32D_Edit   -text "Edit"
-ttk::button   .myFrame.myBin32D_Remove -text "Remove"  -command wokdep:gui:RemoveBinPath
-ttk::button   .myFrame.myBin32D_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myBin32D_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional executables (64-bit) search paths
-ttk::label    .myFrame.myBin64_Lbl    -text "Additional executables (64-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myBin64_Scrl   -command ".myFrame.myBin64_List yview"
-listbox       .myFrame.myBin64_List   -listvariable CSF_OPT_BIN64 -width 80 -height 5 -yscrollcommand ".myFrame.myBin64_Scrl set"
-ttk::button   .myFrame.myBin64_Add    -text "Add"     -command wokdep:gui:AddBinPath
-ttk::button   .myFrame.myBin64_Edit   -text "Edit"
-ttk::button   .myFrame.myBin64_Remove -text "Remove"  -command wokdep:gui:RemoveBinPath
-ttk::button   .myFrame.myBin64_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myBin64_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Additional debug executables (64-bit) search paths
-ttk::label    .myFrame.myBin64D_Lbl    -text "Additional debug executables (64-bit) search paths:" -padding {5 5 80 5}
-scrollbar     .myFrame.myBin64D_Scrl   -command ".myFrame.myBin64D_List yview"
-listbox       .myFrame.myBin64D_List   -listvariable CSF_OPT_BIN64D -width 80 -height 5 -yscrollcommand ".myFrame.myBin64D_Scrl set"
-ttk::button   .myFrame.myBin64D_Add    -text "Add"     -command wokdep:gui:AddBinPath
-ttk::button   .myFrame.myBin64D_Edit   -text "Edit"
-ttk::button   .myFrame.myBin64D_Remove -text "Remove"  -command wokdep:gui:RemoveBinPath
-ttk::button   .myFrame.myBin64D_Clear  -text "Reset"   -command wokdep:gui:ResetLibPath
-ttk::label    .myFrame.myBin64D_ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
-
-# Bottom
-ttk::button   .myFrame.mySave  -text "Save"  -command wokdep:SaveCustom
-ttk::button   .myFrame.myClose -text "Close" -command wokdep:gui:Close
-
-# Create grid
-# Header
-grid .myFrame.myPrjFrame            -row $aRowIter -column 0 -columnspan 10 -sticky w
-grid .myFrame.myPrjFrame.myPrjLbl   -row 0 -column 0
-grid .myFrame.myPrjFrame.myPrjCombo -row 0 -column 1
-if { "$tcl_platform(platform)" == "windows" } {
-  incr aRowIter
-  grid .myFrame.myVsFrame               -row $aRowIter -column 0 -columnspan 10 -sticky w
-  grid .myFrame.myVsFrame.myVsLbl       -row 0 -column 0
-  grid .myFrame.myVsFrame.myVsCombo     -row 0 -column 1 -padx 5
-  grid .myFrame.myVsFrame.myArchCombo   -row 0 -column 2
-  grid .myFrame.myVsFrame.myConfigCombo -row 0 -column 3
-  incr aRowIter
-  grid .myFrame.myVcEntry     -row $aRowIter -column 0
-  grid .myFrame.myVcVarsEntry -row $aRowIter -column 1 -columnspan 4 -sticky w
-  grid .myFrame.myVcBrowseBtn -row $aRowIter -column 6
-  incr aRowIter
-} else {
-  grid .myFrame.myVsFrame               -row $aRowIter -column 4 -sticky w
-  grid .myFrame.myVsFrame.myConfigCombo -row 0 -column 0
-  incr aRowIter
-}
-
-#
-grid .myFrame.myHxxChecks -row $aRowIter -column 0 -columnspan 10 -sticky w
-grid .myFrame.myHxxChecks.myScutsLbl     -row 0 -column 0
-grid .myFrame.myHxxChecks.myScutsCombo   -row 0 -column 1
-if { "$tcl_platform(platform)" == "windows" } {
-  grid .myFrame.myHxxChecks.myRelDebInfoCheck -row 0 -column 2
-  grid .myFrame.myHxxChecks.myRelDebInfoLbl   -row 0 -column 3
-}
-incr aRowIter
-#
-grid .myFrame.mySrchLbl       -row $aRowIter -column 0 -columnspan 10 -sticky w
-incr aRowIter
-grid .myFrame.mySrchEntry     -row $aRowIter -column 0 -columnspan 5
-grid .myFrame.mySrchBrowseBtn -row $aRowIter -column 6
-incr aRowIter
-
-grid .myFrame.myChecks        -row $aRowIter -column 0 -columnspan 10 -sticky w
-incr aRowIter
-grid .myFrame.myChecks.myFreeTypeCheck  -row $aCheckRowIter -column 0 -sticky e
-grid .myFrame.myChecks.myFreeTypeLbl    -row $aCheckRowIter -column 1 -sticky w
-grid .myFrame.myChecks.myRapidJsonCheck -row $aCheckRowIter -column 2 -sticky e
-grid .myFrame.myChecks.myRapidJsonLbl   -row $aCheckRowIter -column 3 -sticky w
-if { "$::tcl_platform(os)" != "Darwin" } {
-  grid .myFrame.myChecks.myGlesCheck     -row $aCheckRowIter -column 4 -sticky e
-  grid .myFrame.myChecks.myGlesLbl       -row $aCheckRowIter -column 5 -sticky w
-}
-#grid .myFrame.myChecks.myOpenClCheck   -row $aCheckRowIter -column 6 -sticky e
-#grid .myFrame.myChecks.myOpenClLbl     -row $aCheckRowIter -column 7 -sticky w
-grid .myFrame.myChecks.myZLibCheck     -row $aCheckRowIter -column 6 -sticky e
-grid .myFrame.myChecks.myZLibLbl       -row $aCheckRowIter -column 7 -sticky w
-
-grid .myFrame.myChecks.myQtCheck      -row $aCheckRowIter -column 12 -sticky e
-grid .myFrame.myChecks.myQtLbl        -row $aCheckRowIter -column 13 -sticky w
-
-incr aCheckRowIter
-grid .myFrame.myChecks.myFImageCheck   -row $aCheckRowIter -column 0 -sticky e
-grid .myFrame.myChecks.myFImageLbl     -row $aCheckRowIter -column 1 -sticky w
-grid .myFrame.myChecks.myDracoCheck    -row $aCheckRowIter -column 2 -sticky e
-grid .myFrame.myChecks.myDracoLbl      -row $aCheckRowIter -column 3 -sticky w
-
-if { "$::tcl_platform(platform)" == "windows" } {
-  grid .myFrame.myChecks.myD3dCheck    -row $aCheckRowIter -column 4 -sticky e
-  grid .myFrame.myChecks.myD3dLbl      -row $aCheckRowIter -column 5 -sticky w
-} else {
-  grid .myFrame.myChecks.myXLibCheck   -row $aCheckRowIter -column 4 -sticky e
-  grid .myFrame.myChecks.myXLibLbl     -row $aCheckRowIter -column 5 -sticky w
-}
-grid .myFrame.myChecks.myLzmaCheck     -row $aCheckRowIter -column 6 -sticky e
-grid .myFrame.myChecks.myLzmaLbl       -row $aCheckRowIter -column 7 -sticky w
-grid .myFrame.myChecks.myJDKCheck      -row $aCheckRowIter -column 12 -sticky e
-grid .myFrame.myChecks.myJDKLbl        -row $aCheckRowIter -column 13 -sticky w
-
-incr aCheckRowIter
-grid .myFrame.myChecks.myFFmpegCheck   -row $aCheckRowIter -column 0 -sticky e
-grid .myFrame.myChecks.myFFmpegLbl     -row $aCheckRowIter -column 1 -sticky w
-grid .myFrame.myChecks.myVtkCheck      -row $aCheckRowIter -column 2 -sticky e
-grid .myFrame.myChecks.myVtkLbl        -row $aCheckRowIter -column 3 -sticky w
-grid .myFrame.myChecks.myOpenVrCheck   -row $aCheckRowIter -column 4 -sticky e
-grid .myFrame.myChecks.myOpenVrLbl     -row $aCheckRowIter -column 5 -sticky w
-grid .myFrame.myChecks.myE57Check      -row $aCheckRowIter -column 6 -sticky e
-grid .myFrame.myChecks.myE57Lbl        -row $aCheckRowIter -column 7 -sticky w
-
-if { "$::tcl_platform(platform)" == "windows" } {
-  grid .myFrame.myChecks.myInspectorBuild      -row $aCheckRowIter -column 12 -sticky e
-  grid .myFrame.myChecks.myInspectorLbl        -row $aCheckRowIter -column 13 -sticky w
-}
-
-incr aCheckRowIter
-
-grid .myFrame.myChecks.myTbbCheck      -row $aCheckRowIter -column 12 -sticky e
-grid .myFrame.myChecks.myTbbLbl        -row $aCheckRowIter -column 13 -sticky w
-
-incr aCheckRowIter
-
-# Additional headers search paths
-grid .myFrame.myIncLbl    -row $aRowIter -column 0 -columnspan 10 -sticky w
-incr aRowIter
-grid .myFrame.myIncList   -row $aRowIter -column 0 -rowspan 4 -columnspan 5
-grid .myFrame.myIncScrl   -row $aRowIter -column 5 -rowspan 4
-grid .myFrame.myIncAdd    -row $aRowIter -column 6
-incr aRowIter
-#grid .myFrame.myIncEdit   -row $aRowIter -column 6
-incr aRowIter
-grid .myFrame.myIncRemove -row $aRowIter -column 6
-incr aRowIter
-grid .myFrame.myIncClear  -row $aRowIter -column 6
-incr aRowIter
-grid .myFrame.myIncErrLbl -row $aRowIter -column 0 -columnspan 10 -sticky w
-incr aRowIter
-
-# Additional search paths
-wokdep:gui:Show3264Bitness aRowIter
-
-# Bottom section
-grid .myFrame.mySave  -row $aRowIter -column 4 -columnspan 2
-grid .myFrame.myClose -row $aRowIter -column 6 -columnspan 2
-
-# Bind events
-bind .myFrame.myPrjFrame.myPrjCombo <<ComboboxSelected>> {
-  wokdep:gui:SwitchConfig
-}
-bind .myFrame.myVsFrame.myVsCombo <<ComboboxSelected>> {
-  wokdep:gui:SwitchConfig
-}
-bind .myFrame.myVsFrame.myArchCombo <<ComboboxSelected>> {
-  wokdep:gui:SwitchArch
-}
-bind .myFrame.myVsFrame.myConfigCombo <<ComboboxSelected>> {
-  wokdep:gui:SwitchArch
-}
-
-.myFrame.mySrchEntry configure -validate all -validatecommand {
-  set ::PRODUCTS_PATH [file normalize "$::PRODUCTS_PATH_INPUT"]
-  #return [file exists "$::PRODUCTS_PATH"]
-  wokdep:gui:UpdateList
-  return 1
-}
-
-wokdep:gui:UpdateList

adm/gendoc.tcl

@@ -835,6 +835,7 @@ proc OCCDoc_MakeDoxyfile {docType outDir tagFileDir {doxyFileName} {generatorMod
     puts $doxyFile "PROJECT_NUMBER         = $occt_version"
     puts $doxyFile "OUTPUT_DIRECTORY       = $outDir/."
     puts $doxyFile "PROJECT_LOGO           = [OCCDoc_GetDoxDir]/resources/occ_logo.png"
+    puts $doxyFile "EXAMPLE_PATH           = [OCCDoc_GetSourceDir $productsPath]"
 
     set PARAM_INPUT "INPUT                 ="
     set PARAM_IMAGEPATH "IMAGE_PATH        = [OCCDoc_GetDoxDir]/resources/ "

adm/qmake/OccCppConfig.pri

@@ -39,6 +39,10 @@ win32 {
   DEFINES += _SCL_SECURE_NO_WARNINGS
 } else {
   CONFIG += c++11
+  clang {
+    QMAKE_CFLAGS_WARN_ON   += -Wshorten-64-to-32
+    QMAKE_CXXFLAGS_WARN_ON += -Wshorten-64-to-32
+  }
   QMAKE_CFLAGS   += -fexceptions
   QMAKE_CXXFLAGS += -fexceptions
   QMAKE_CXXFLAGS += -fvisibility=default
@@ -115,6 +119,8 @@ android-g++ {
     # VS2015, vc141
   } else:equals(aMsvcVer, 16.0){
     # VS2019, vc142
+  } else:equals(aMsvcVer, 17.0){
+    # VS2022, vc143
   } else {
     warning (Unknown msvc version. "$$MY_COMPILER" is used)
   }

adm/qmake/OccToolkit.pri

@@ -26,6 +26,7 @@ HAVE_FFMPEG    { CSF_FFmpeg = -lavcodec -lavformat -lswscale -lavutil }
 HAVE_TBB       { CSF_TBB = -ltbb -ltbbmalloc }
 HAVE_ZLIB      { CSF_ZLIB = -lzlib }
 HAVE_LIBLZMA   { CSF_LIBLZMA = -lliblzma }
+HAVE_DRACO     { CSF_Draco = -ldraco }
 win32 {
   CSF_kernel32   = -lkernel32
   CSF_advapi32   = -ladvapi32
@@ -80,8 +81,7 @@ for (aCfgIter, CONFIG) {
 }
 
 # Define the list of standard OCCT file extensions
-aHxxRegex = ^.*\.(hxx|h|lxx|gxx)$
-aPxxRegex = ^.*\.(pxx)$
+aHxxRegex = ^.*\.(hxx|h|lxx)$
 aCxxRegex = ^.*\.(cxx|cpp|c)$
 mac { aCxxRegex = ^.*\.(cxx|cpp|c|m|mm)$ }
 
@@ -131,21 +131,31 @@ for (aPackage, aPackages) {
   }
 }
 
-# extend clean with versioned .so files
 !win32 {
   aVerList = $$split(VERSION, ".")
   aVerMaj = $$member(aVerList, 0)
   aVerMin = $$member(aVerList, 1)
   aVerMic = $$member(aVerList, 2)
+
   equals(TEMPLATE, app) {
     QMAKE_CLEAN += $$DESTDIR/$${TARGET}
   } else {
     mac {
+      # override qmake soname versionong logic
+      QMAKE_LFLAGS_SONAME =
+      QMAKE_LFLAGS += -Wl,-soname=lib$${TARGET}.dylib.$${aVerMaj}.$${aVerMin}
+
+      # extend clean with versioned .dylib files
       QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.dylib
       QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.dylib
       QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.$${aVerMin}.dylib
       QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.$${aVerMin}.$${aVerMic}.dylib
     } else {
+      # override qmake soname versionong logic
+      QMAKE_LFLAGS_SONAME =
+      QMAKE_LFLAGS += -Wl,-soname=lib$${TARGET}.so.$${aVerMaj}.$${aVerMin}
+
+      # extend clean with versioned .so files
       QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so
       QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}
       QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}.$${aVerMin}

adm/scripts/android_build.bat

@@ -33,6 +33,7 @@ set "BUILD_ModelingAlgorithms=ON"
 set "BUILD_Visualization=ON"
 set "BUILD_ApplicationFramework=ON"
 set "BUILD_DataExchange=ON"
+set "BUILD_DETools=OFF"
 
 rem Optional 3rd-party libraries to enable
 set "USE_FREETYPE=ON"
@@ -166,6 +167,7 @@ if ["%toCMake%"] == ["1"] (
  -D BUILD_MODULE_Visualization:BOOL="%BUILD_Visualization%" ^
  -D BUILD_MODULE_ApplicationFramework:BOOL="%BUILD_ApplicationFramework%" ^
  -D BUILD_MODULE_DataExchange:BOOL="%BUILD_DataExchange%" ^
+ -D BUILD_MODULE_DETools:BOOL="OFF" ^
  -D BUILD_MODULE_Draw:BOOL="OFF" ^
  -D BUILD_DOC_Overview:BOOL="OFF" ^
  -D USE_FREETYPE:BOOL="%USE_FREETYPE%" ^

adm/scripts/android_custom.bat.template

@@ -27,6 +27,7 @@ rem set "BUILD_ModelingAlgorithms=ON"
 rem set "BUILD_Visualization=ON"
 rem set "BUILD_ApplicationFramework=ON"
 rem set "BUILD_DataExchange=ON"
+rem set "BUILD_MODULE_DETools=OFF"
 
 rem Optional 3rd-party libraries to enable
 rem set "USE_RAPIDJSON=ON"

adm/scripts/cmake_custom.bat.template

@@ -33,6 +33,7 @@ rem set BUILD_PATCH=
 
 rem set BUILD_MODULE_ApplicationFramework=ON
 rem set BUILD_MODULE_DataExchange=ON
+rem set BUILD_MODULE_DETools=OFF
 rem set BUILD_MODULE_Draw=ON
 rem set BUILD_MODULE_ModelingAlgorithms=ON
 rem set BUILD_MODULE_ModelingData=ON

adm/scripts/cmake_custom.sh.template

@@ -26,6 +26,7 @@ FREETYPE_DIR="$OCCT3RDPARTY/freetype-2.7.1"
 
 #BUILD_MODULE_ApplicationFramework=ON
 #BUILD_MODULE_DataExchange=ON
+#BUILD_MODULE_DETools=OFF
 #BUILD_MODULE_Draw=ON
 #BUILD_MODULE_ModelingAlgorithms=ON
 #BUILD_MODULE_ModelingData=ON

adm/scripts/cmake_gen.bat

@@ -28,6 +28,7 @@ set BUILD_FORCE_RelWithDebInfo=OFF
 
 set BUILD_MODULE_ApplicationFramework=ON
 set BUILD_MODULE_DataExchange=ON
+set BUILD_MODULE_DETools=OFF
 set BUILD_MODULE_Draw=ON
 set BUILD_MODULE_ModelingAlgorithms=ON
 set BUILD_MODULE_ModelingData=ON
@@ -62,6 +63,7 @@ cmake -G "%arch_compile%" ^
   -D BUILD_LIBRARY_TYPE:STRING=%BUILD_LIBRARY_TYPE% ^
   -D BUILD_MODULE_ApplicationFramework:BOOL=%BUILD_MODULE_ApplicationFramework% ^
   -D BUILD_MODULE_DataExchange:BOOL=%BUILD_MODULE_DataExchange% ^
+  -D BUILD_MODULE_DETools:BOOL=%BUILD_MODULE_DETools% ^
   -D BUILD_MODULE_Draw:BOOL=%BUILD_MODULE_Draw% ^
   -D BUILD_MODULE_FoundationClasses:BOOL=ON ^
   -D BUILD_MODULE_ModelingAlgorithms:BOOL=%BUILD_MODULE_ModelingAlgorithms% ^

adm/scripts/cmake_gen.sh

@@ -31,6 +31,7 @@ BUILD_ENABLE_FPE_SIGNAL_HANDLER=ON
 
 BUILD_MODULE_ApplicationFramework=ON
 BUILD_MODULE_DataExchange=ON
+BUILD_MODULE_DETools=OFF
 BUILD_MODULE_Draw=ON
 BUILD_MODULE_ModelingAlgorithms=ON
 BUILD_MODULE_ModelingData=ON
@@ -63,6 +64,7 @@ cmake -G "Unix Makefiles" \
   -D BUILD_LIBRARY_TYPE:STRING=$BUILD_LIBRARY_TYPE \
   -D BUILD_MODULE_ApplicationFramework:BOOL=$BUILD_MODULE_ApplicationFramework \
   -D BUILD_MODULE_DataExchange:BOOL=$BUILD_MODULE_DataExchange \
+  -D BUILD_MODULE_DETools:BOOL=$BUILD_MODULE_DETools \
   -D BUILD_MODULE_Draw:BOOL=$BUILD_MODULE_Draw \
   -D BUILD_MODULE_FoundationClasses:BOOL=ON \
   -D BUILD_MODULE_ModelingAlgorithms:BOOL=$BUILD_MODULE_ModelingAlgorithms \

adm/scripts/ios_build.sh

@@ -20,13 +20,13 @@ export aRapidJson=
 export aDraco=
 
 # build stages to perform
-export toSimulator=0
 export isStatic=1
 export toCMake=1
 export toClean=1
 export toMake=1
 export toInstall=1
 export toPack=0
+export toPackFat=0
 export toDebug=0
 
 export BUILD_ModelingData=ON
@@ -34,6 +34,7 @@ export BUILD_ModelingAlgorithms=ON
 export BUILD_Visualization=ON
 export BUILD_ApplicationFramework=ON
 export BUILD_DataExchange=ON
+export BUILD_DETools=OFF
 
 export USE_FREETYPE=ON
 export USE_FREEIMAGE=OFF
@@ -41,13 +42,25 @@ export USE_RAPIDJSON=OFF
 export USE_DRACO=OFF
 
 export IPHONEOS_DEPLOYMENT_TARGET=8.0
-export anAbi=arm64
-#export anAbi=x86_64
+#export anAbiList="iPhoneOS|arm64 iPhoneSimulator|arm64 iPhoneSimulator|x86_64"
+export anAbiList="iPhoneOS|arm64"
 
 if [[ -f "${aScriptDir}/ios_custom.sh" ]]; then
   source "${aScriptDir}/ios_custom.sh"
 fi
 
+anOcctVerSuffix=`grep -e "#define OCC_VERSION_DEVELOPMENT" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
+anOcctVersion=`grep -e "#define OCC_VERSION_COMPLETE" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
+aGitBranch=`git symbolic-ref --short HEAD`
+
+YEAR=$(date +"%Y")
+MONTH=$(date +"%m")
+DAY=$(date +"%d")
+aRevision=-${YEAR}-${MONTH}-${DAY}
+#aRevision=-${aGitBranch}
+
+set -o pipefail
+
 aBuildType="Release"
 aBuildTypePrefix=
 if [[ $toDebug == 1 ]]; then
@@ -58,59 +71,52 @@ aLibType="Shared"
 if [[ $isStatic == 1 ]]; then
   aLibType="Static"
 fi
-aPlatformAndCompiler=ios-${anAbi}${aBuildTypePrefix}-clang
-aPlatformSdk="iphoneos"
-aSysRoot="/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS.sdk"
-if [[ $toSimulator == 1 ]]; then
-  #anAbi=x86_64
-  aPlatformAndCompiler=ios-simulator64-${anAbi}${aBuildTypePrefix}-clang
-  aPlatformSdk="iphonesimulator"
-  aSysRoot="/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator.sdk"
-fi
 
-aWorkDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}-make"
-aDestDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}"
-aLogFile="${aCasSrc}/${aBuildRoot}/build-${aPlatformAndCompiler}.log"
+function buildArch {
+  anAbi=$1
+  aPlatformSdk=$2
 
-if [[ $toCMake == 1 ]] && [[ $toClean == 1 ]]; then
-  rm -r -f "$aWorkDir"
-  rm -r -f "$aDestDir"
-fi
-mkdir -p "$aWorkDir"
-mkdir -p "$aDestDir"
-rm -f "$aLogFile"
+  aPlatformAndCompiler=${aPlatformSdk}-${anAbi}${aBuildTypePrefix}-clang
 
-anOcctVerSuffix=`grep -e "#define OCC_VERSION_DEVELOPMENT" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
-anOcctVersion=`grep -e "#define OCC_VERSION_COMPLETE" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
-aGitBranch=`git symbolic-ref --short HEAD`
+  aWorkDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}-make"
+  aDestDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}"
+  aLogFile="${aCasSrc}/${aBuildRoot}/build-${aPlatformAndCompiler}.log"
 
-# include some information about OCCT into archive
-echo \<pre\>> "${aWorkDir}/VERSION.html"
-git status >> "${aWorkDir}/VERSION.html"
-git log -n 100 >> "${aWorkDir}/VERSION.html"
-echo \</pre\>>> "${aWorkDir}/VERSION.html"
-
-pushd "$aWorkDir"
-
-aTimeZERO=$SECONDS
-set -o pipefail
-
-function logDuration {
-  if [[ $1 == 1 ]]; then
-    aDur=$(($4 - $3))
-    echo $2 time: $aDur sec>> "$aLogFile"
+  if [[ $toCMake == 1 ]] && [[ $toClean == 1 ]]; then
+    rm -r -f "$aWorkDir"
+    rm -r -f "$aDestDir"
   fi
-}
+  mkdir -p "$aWorkDir"
+  mkdir -p "$aDestDir"
+  rm -f "$aLogFile"
 
-# (re)generate Make files
-if [[ $toCMake == 1 ]]; then
-  echo Configuring OCCT for iOS...
-  cmake -G "Unix Makefiles" \
+  # include some information about OCCT into archive
+  echo \<pre\>> "${aWorkDir}/VERSION.html"
+  git status >> "${aWorkDir}/VERSION.html"
+  git log -n 100 >> "${aWorkDir}/VERSION.html"
+  echo \</pre\>>> "${aWorkDir}/VERSION.html"
+
+  pushd "$aWorkDir"
+
+  aTimeZERO=$SECONDS
+
+  function logDuration {
+    if [[ $1 == 1 ]]; then
+      aDur=$(($4 - $3))
+      echo $2 time: $aDur sec>> "$aLogFile"
+    fi
+  }
+
+  aSysRoot="/Applications/Xcode.app/Contents/Developer/Platforms/${aPlatformSdk}.platform/Developer/SDKs/${aPlatformSdk}.sdk"
+
+  # (re)generate Make files
+  if [[ $toCMake == 1 ]]; then
+    echo Configuring OCCT for iOS...
+    cmake -G "Unix Makefiles" \
   -D CMAKE_SYSTEM_NAME="iOS" \
   -D CMAKE_OSX_ARCHITECTURES:STRING="$anAbi" \
   -D CMAKE_OSX_DEPLOYMENT_TARGET:STRING="$IPHONEOS_DEPLOYMENT_TARGET" \
   -D CMAKE_OSX_SYSROOT:PATH="$aSysRoot" \
-  -D ENABLE_VISIBILITY:BOOL="TRUE" \
   -D CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS:BOOL="OFF" \
   -D CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS:BOOL="OFF" \
   -D CMAKE_BUILD_TYPE:STRING="$aBuildType" \
@@ -143,59 +149,121 @@ if [[ $toCMake == 1 ]]; then
   -D BUILD_MODULE_Visualization:BOOL="${BUILD_Visualization}" \
   -D BUILD_MODULE_ApplicationFramework:BOOL="${BUILD_ApplicationFramework}" \
   -D BUILD_MODULE_DataExchange:BOOL="${BUILD_DataExchange}" \
+  -D BUILD_MODULE_DETools:BOOL="${BUILD_DETools}" \
   -D BUILD_MODULE_Draw:BOOL="OFF" \
   -D BUILD_DOC_Overview:BOOL="OFF" \
-  "$aCasSrc" 2>&1 | tee -a "$aLogFile"
-  aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
-fi
-aTimeGEN=$SECONDS
-logDuration $toCMake "Generation" $aTimeZERO $aTimeGEN
+    "$aCasSrc" 2>&1 | tee -a "$aLogFile"
+    aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
+  fi
+  aTimeGEN=$SECONDS
+  logDuration $toCMake "Generation" $aTimeZERO $aTimeGEN
 
-# clean up from previous build
-if [[ $toClean == 1 ]]; then
-  make clean
-fi
+  # clean up from previous build
+  if [[ $toClean == 1 ]]; then
+    make clean
+  fi
 
-# build the project
-if [[ $toMake == 1 ]]; then
-  echo Building...
-  make -j $aNbJobs 2>&1 | tee -a "$aLogFile"
-  aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
-fi
-aTimeBUILD=$SECONDS
-logDuration $toMake "Building"       $aTimeGEN  $aTimeBUILD
-logDuration $toMake "Total building" $aTimeZERO $aTimeBUILD
+  # build the project
+  if [[ $toMake == 1 ]]; then
+    echo Building...
+    make -j $aNbJobs 2>&1 | tee -a "$aLogFile"
+    aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
+  fi
+  aTimeBUILD=$SECONDS
+  logDuration $toMake "Building"       $aTimeGEN  $aTimeBUILD
+  logDuration $toMake "Total building" $aTimeZERO $aTimeBUILD
 
-# install the project
-if [[ $toInstall == 1 ]]; then
-  echo Installing OCCT into $aDestDir...
-  make install 2>&1 | tee -a "$aLogFile"
-  cp -f "$aWorkDir/VERSION.html" "$aDestDir/VERSION.html"
-fi
-aTimeINSTALL=$SECONDS
-logDuration $toInstall "Install" $aTimeBUILD $aTimeINSTALL
+  # install the project
+  if [[ $toInstall == 1 ]]; then
+    echo Installing OCCT into $aDestDir...
+    make install 2>&1 | tee -a "$aLogFile"
+    cp -f "$aWorkDir/VERSION.html" "$aDestDir/VERSION.html"
+    echo Platform: ${aPlatformSdk} ABI: ${anAbi} Build: ${aBuildType} IPHONEOS_DEPLOYMENT_TARGET: ${IPHONEOS_DEPLOYMENT_TARGET} > "$aDestDir/build_target.txt"
+  fi
+  aTimeINSTALL=$SECONDS
+  logDuration $toInstall "Install" $aTimeBUILD $aTimeINSTALL
 
-# create an archive
-if [[ $toPack == 1 ]]; then
-  YEAR=$(date +"%Y")
-  MONTH=$(date +"%m")
-  DAY=$(date +"%d")
-  aRevision=-${YEAR}-${MONTH}-${DAY}
-  #aRevision=-${aGitBranch}
+  # create an archive
+  if [[ $toPack == 1 ]]; then
+    anArchName=occt-${anOcctVersion}${anOcctVerSuffix}${aRevision}-${aPlatformAndCompiler}.tar.bz2
+    echo Creating an archive ${aCasSrc}/${aBuildRoot}/${anArchName}...
+    rm ${aDestDir}/../${anArchName} &>/dev/null
+    pushd "$aDestDir"
+    tar -jcf ${aDestDir}/../${anArchName} *
+    popd
+  fi
+  aTimePACK=$SECONDS
+  logDuration $toPack "Packing archive" $aTimeINSTALL $aTimePACK
+
+  # finished
+  DURATION=$(($aTimePACK - $aTimeZERO))
+  echo Total time: $DURATION sec
+  logDuration 1 "Total" $aTimeZERO $aTimePACK
 
-  anArchName=occt-${anOcctVersion}${anOcctVerSuffix}${aRevision}-${aPlatformAndCompiler}.tar.bz2
-  echo Creating an archive ${aCasSrc}/${aBuildRoot}/${anArchName}...
-  rm ${aDestDir}/../${anArchName} &>/dev/null
-  pushd "$aDestDir"
-  tar -jcf ${aDestDir}/../${anArchName} *
   popd
+}
+
+for anArchIter in $anAbiList
+do
+  IFS="|" read -r aPlatform anArch <<< "$anArchIter"
+  echo Platform: ${aPlatform} ABI: ${anArch} Build: ${aBuildType}
+  buildArch $anArch $aPlatform
+done
+
+# create a FAT archive
+if [[ $toPackFat == 1 ]]; then
+  for aPlatIter in iPhoneOS iPhoneSimulator
+  do
+    aSuffixFat=${aPlatIter}${aBuildTypePrefix}-clang
+    aFatDir="${aCasSrc}/${aBuildRoot}/${aSuffixFat}"
+
+    # merge per-arch builds into fat builds
+    hasPlatform=0
+    for anArchIter in $anAbiList
+    do
+      IFS="|" read -r aPlatform anArch <<< "$anArchIter"
+      if [[ $aPlatIter != ${aPlatform} ]]; then
+        continue
+      fi
+
+      aSuffixThin=${aPlatform}-${anArch}${aBuildTypePrefix}-clang
+      anArchDir="${aCasSrc}/${aBuildRoot}/${aSuffixThin}"
+      if [[ $hasPlatform == 0 ]]; then
+        hasPlatform=1
+        echo Packing FAT archive for platform: ${aPlatform}
+        rm -r -f "$aFatDir"
+        mkdir -p "$aFatDir"
+        rsync -r --exclude '*.a' "$anArchDir/" "$aFatDir"
+        rm -f "$aFatDir/build_target.txt"
+        for aLibIter in $anArchDir/lib/*.a; do
+          aLibName=`basename $aLibIter`
+          lipo "$anArchDir/lib/$aLibName" -output "$aFatDir/lib/$aLibName" -create
+        done
+      else
+        for aLibIter in $aFatDir/lib/*.a; do
+          aLibName=`basename $aLibIter`
+          lipo "$aFatDir/lib/$aLibName" "$anArchDir/lib/$aLibName" -output "$aFatDir/lib/$aLibName" -create
+          #lipo -info "$aFatDir/lib/$aLibName"
+        done
+      fi
+      cat "$anArchDir/build_target.txt" >> "$aFatDir/build_target.txt"
+    done
+
+    # create an archive
+    for anArchIter in $anAbiList
+    do
+      IFS="|" read -r aPlatform anArch <<< "$anArchIter"
+      if [[ $aPlatIter != ${aPlatform} ]]; then
+        continue
+      fi
+
+      anArchName=occt-${anOcctVersion}${anOcctVerSuffix}${aRevision}-${aSuffixFat}.tar.bz2
+      echo Creating an archive ${aCasSrc}/${aBuildRoot}/${anArchName}...
+      rm ${aFatDir}/../${anArchName} &>/dev/null
+      pushd "$aFatDir"
+      tar -jcf ${aFatDir}/../${anArchName} *
+      popd
+      break
+    done
+  done
 fi
-aTimePACK=$SECONDS
-logDuration $toPack "Packing archive" $aTimeINSTALL $aTimePACK
-
-# finished
-DURATION=$(($aTimePACK - $aTimeZERO))
-echo Total time: $DURATION sec
-logDuration 1 "Total" $aTimeZERO $aTimePACK
-
-popd

adm/scripts/ios_custom.sh.template

@@ -1,4 +1,4 @@
-# environment configuration template for macos_build.sh (to be renamed as macos_custom_env.sh)
+# environment configuration template for ios_build.sh (to be renamed as ios_custom_env.sh)
 export PATH=/Applications/CMake.app/Contents/bin:$PATH
 export aFreeType="$aSrcRoot/../3rdparty/freetype-2.10.4-ios"
 export aFreeImage="$aSrcRoot/../3rdparty/freeimage-3.18-ios"
@@ -6,13 +6,13 @@ export aRapidJson="$aSrcRoot/../3rdparty/rapidjson-1.1.0"
 export aDraco="$aSrcRoot/../3rdparty/draco-1.4.1-ios"
 
 # Uncomment to customize building steps
-#export toSimulator=0
 #export isStatic=0
 #export toCMake=1
 #export toClean=1
 #export toMake=1
 #export toInstall=1
 #export toPack=0
+#export toPackFat=1
 #export toDebug=0
 
 #export BUILD_ModelingData=ON
@@ -20,11 +20,12 @@ export aDraco="$aSrcRoot/../3rdparty/draco-1.4.1-ios"
 #export BUILD_Visualization=ON
 #export BUILD_ApplicationFramework=ON
 #export BUILD_DataExchange=ON
+#export BUILD_DETools=OFF
 
 #export USE_RAPIDJSON=ON
 #export USE_DRACO=ON
 #export USE_FREEIMAGE=ON
 
 #export IPHONEOS_DEPLOYMENT_TARGET=8.0
-#export anAbi=arm64
-#export anAbi=x86_64
+#export anAbiList="iPhoneOS|arm64 iPhoneSimulator|arm64 iPhoneSimulator|x86_64"
+#export anAbiList="iPhoneOS|arm64"

adm/scripts/macos_build.sh

@@ -20,11 +20,13 @@ export aRapidJson=
 export aDraco=
 
 # build stages to perform
+export isStatic=0
 export toCMake=1
 export toClean=1
 export toMake=1
 export toInstall=1
 export toPack=0
+export toPackFat=0
 export toDebug=0
 
 export BUILD_ModelingData=ON
@@ -32,74 +34,95 @@ export BUILD_ModelingAlgorithms=ON
 export BUILD_Visualization=ON
 export BUILD_ApplicationFramework=ON
 export BUILD_DataExchange=ON
+export BUILD_DETools=OFF
 export BUILD_Draw=ON
 
+export USE_FREETYPE=ON
 export USE_FREEIMAGE=ON
 export USE_RAPIDJSON=OFF
 export USE_DRACO=OFF
 
 export MACOSX_DEPLOYMENT_TARGET=10.10
-#export anAbi=arm64
-export anAbi=x86_64
+#export anAbiList="arm64 x86_64"
+export anAbiList="x86_64"
+aPlatform="macos"
 
 if [[ -f "${aScriptDir}/macos_custom.sh" ]]; then
   source "${aScriptDir}/macos_custom.sh"
 fi
 
+anOcctVerSuffix=`grep -e "#define OCC_VERSION_DEVELOPMENT" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
+anOcctVersion=`grep -e "#define OCC_VERSION_COMPLETE" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
+aGitBranch=`git symbolic-ref --short HEAD`
+
+YEAR=$(date +"%Y")
+MONTH=$(date +"%m")
+DAY=$(date +"%d")
+aRevision=-${YEAR}-${MONTH}-${DAY}
+#aRevision=-${aGitBranch}
+
+set -o pipefail
+
 aBuildType="Release"
 aBuildTypePrefix=
 if [[ $toDebug == 1 ]]; then
   aBuildType="Debug"
   aBuildTypePrefix="-debug"
 fi
-aPlatformAndCompiler=mac-${anAbi}${aBuildTypePrefix}-clang
-
-aWorkDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}-make"
-aDestDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}"
-aLogFile="${aCasSrc}/${aBuildRoot}/build-${aPlatformAndCompiler}.log"
-
-if [[ $toCMake == 1 ]] && [[ $toClean == 1 ]]; then
-  rm -r -f "$aWorkDir"
-  rm -r -f "$aDestDir"
+aLibType="Shared"
+aLibExt="dylib"
+if [[ $isStatic == 1 ]]; then
+  aLibType="Static"
+  aLibExt="a"
 fi
-mkdir -p "$aWorkDir"
-mkdir -p "$aDestDir"
-rm -f "$aLogFile"
 
-anOcctVerSuffix=`grep -e "#define OCC_VERSION_DEVELOPMENT" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
-anOcctVersion=`grep -e "#define OCC_VERSION_COMPLETE" "$aCasSrc/src/Standard/Standard_Version.hxx" | awk '{print $3}' | xargs`
-aGitBranch=`git symbolic-ref --short HEAD`
+function buildArch {
+  anAbi=$1
 
-# include some information about OCCT into archive
-echo \<pre\>> "${aWorkDir}/VERSION.html"
-git status >> "${aWorkDir}/VERSION.html"
-git log -n 100 >> "${aWorkDir}/VERSION.html"
-echo \</pre\>>> "${aWorkDir}/VERSION.html"
+  aPlatformAndCompiler=${aPlatform}-${anAbi}${aBuildTypePrefix}-clang
 
-pushd "$aWorkDir"
+  aWorkDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}-make"
+  aDestDir="${aCasSrc}/${aBuildRoot}/${aPlatformAndCompiler}"
+  aLogFile="${aCasSrc}/${aBuildRoot}/build-${aPlatformAndCompiler}.log"
 
-aTimeZERO=$SECONDS
-set -o pipefail
-
-function logDuration {
-  if [[ $1 == 1 ]]; then
-    aDur=$(($4 - $3))
-    echo $2 time: $aDur sec>> "$aLogFile"
+  if [[ $toCMake == 1 ]] && [[ $toClean == 1 ]]; then
+    rm -r -f "$aWorkDir"
+    rm -r -f "$aDestDir"
   fi
-}
+  mkdir -p "$aWorkDir"
+  mkdir -p "$aDestDir"
+  rm -f "$aLogFile"
 
-# (re)generate Make files
-if [[ $toCMake == 1 ]]; then
-  echo Configuring OCCT for macOS...
-  cmake -G "Unix Makefiles" \
-  -D CMAKE_BUILD_TYPE:STRING="$aBuildType" \
-  -D BUILD_LIBRARY_TYPE:STRING="Shared" \
+  # include some information about OCCT into archive
+  echo \<pre\>> "${aWorkDir}/VERSION.html"
+  git status >> "${aWorkDir}/VERSION.html"
+  git log -n 100 >> "${aWorkDir}/VERSION.html"
+  echo \</pre\>>> "${aWorkDir}/VERSION.html"
+
+  pushd "$aWorkDir"
+
+  aTimeZERO=$SECONDS
+
+  function logDuration {
+    if [[ $1 == 1 ]]; then
+      aDur=$(($4 - $3))
+      echo $2 time: $aDur sec>> "$aLogFile"
+    fi
+  }
+
+  # (re)generate Make files
+  if [[ $toCMake == 1 ]]; then
+    echo Configuring OCCT for macOS...
+    cmake -G "Unix Makefiles" \
   -D CMAKE_OSX_ARCHITECTURES:STRING="$anAbi" \
+  -D CMAKE_BUILD_TYPE:STRING="$aBuildType" \
+  -D BUILD_LIBRARY_TYPE:STRING="$aLibType" \
   -D INSTALL_DIR:PATH="$aDestDir" \
   -D INSTALL_DIR_INCLUDE:STRING="inc" \
   -D INSTALL_DIR_LIB:STRING="lib" \
   -D INSTALL_DIR_RESOURCE:STRING="src" \
   -D INSTALL_NAME_DIR:STRING="@executable_path/../Frameworks" \
+  -D USE_FREETYPE:BOOL="$USE_FREETYPE" \
   -D 3RDPARTY_FREETYPE_DIR:PATH="$aFreeType" \
   -D 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2:FILEPATH="$aFreeType/include" \
   -D 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build:FILEPATH="$aFreeType/include" \
@@ -123,59 +146,125 @@ if [[ $toCMake == 1 ]]; then
   -D BUILD_MODULE_Visualization:BOOL="${BUILD_Visualization}" \
   -D BUILD_MODULE_ApplicationFramework:BOOL="${BUILD_ApplicationFramework}" \
   -D BUILD_MODULE_DataExchange:BOOL="${BUILD_DataExchange}" \
+  -D BUILD_MODULE_DETools:BOOL="${BUILD_DETools}" \
   -D BUILD_MODULE_Draw:BOOL="${BUILD_Draw}" \
   -D BUILD_DOC_Overview:BOOL="OFF" \
-  "$aCasSrc" 2>&1 | tee -a "$aLogFile"
-  aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
-fi
-aTimeGEN=$SECONDS
-logDuration $toCMake "Generation" $aTimeZERO $aTimeGEN
+    "$aCasSrc" 2>&1 | tee -a "$aLogFile"
+    aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
+  fi
+  aTimeGEN=$SECONDS
+  logDuration $toCMake "Generation" $aTimeZERO $aTimeGEN
 
-# clean up from previous build
-if [[ $toClean == 1 ]]; then
-  make clean
-fi
+  # clean up from previous build
+  if [[ $toClean == 1 ]]; then
+    make clean
+  fi
 
-# build the project
-if [[ $toMake == 1 ]]; then
-  echo Building OCCT...
-  make -j $aNbJobs 2>&1 | tee -a "$aLogFile"
-  aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
-fi
-aTimeBUILD=$SECONDS
-logDuration $toMake "Building"       $aTimeGEN  $aTimeBUILD
-logDuration $toMake "Total building" $aTimeZERO $aTimeBUILD
+  # build the project
+  if [[ $toMake == 1 ]]; then
+    echo Building OCCT...
+    make -j $aNbJobs 2>&1 | tee -a "$aLogFile"
+    aResult=$?; if [[ $aResult != 0 ]]; then exit $aResult; fi
+  fi
+  aTimeBUILD=$SECONDS
+  logDuration $toMake "Building"       $aTimeGEN  $aTimeBUILD
+  logDuration $toMake "Total building" $aTimeZERO $aTimeBUILD
 
-# install the project
-if [[ $toInstall == 1 ]]; then
-  echo Installing OCCT into $aDestDir...
-  make install 2>&1 | tee -a "$aLogFile"
-  cp -f "$aWorkDir/VERSION.html" "$aDestDir/VERSION.html"
-fi
-aTimeINSTALL=$SECONDS
-logDuration $toInstall "Install" $aTimeBUILD $aTimeINSTALL
+  # install the project
+  if [[ $toInstall == 1 ]]; then
+    echo Installing OCCT into $aDestDir...
+    make install 2>&1 | tee -a "$aLogFile"
+    cp -f "$aWorkDir/VERSION.html" "$aDestDir/VERSION.html"
+    echo Platform: macOS ABI: ${anAbi} Build: ${aBuildType} MACOSX_DEPLOYMENT_TARGET: ${MACOSX_DEPLOYMENT_TARGET} > "$aDestDir/build_target.txt"
+  fi
+  aTimeINSTALL=$SECONDS
+  logDuration $toInstall "Install" $aTimeBUILD $aTimeINSTALL
 
-# create an archive
-if [[ $toPack == 1 ]]; then
-  YEAR=$(date +"%Y")
-  MONTH=$(date +"%m")
-  DAY=$(date +"%d")
-  aRevision=-${YEAR}-${MONTH}-${DAY}
-  #aRevision=-${aGitBranch}
+  # create an archive
+  if [[ $toPack == 1 ]]; then
+    anArchName=occt-${anOcctVersion}${anOcctVerSuffix}${aRevision}-${aPlatformAndCompiler}.tar.bz2
+    echo Creating an archive ${aCasSrc}/${aBuildRoot}/${anArchName}...
+    rm ${aDestDir}/../${anArchName} &>/dev/null
+    pushd "$aDestDir"
+    tar -jcf ${aDestDir}/../${anArchName} *
+    popd
+  fi
+  aTimePACK=$SECONDS
+  logDuration $toPack "Packing archive" $aTimeINSTALL $aTimePACK
 
-  anArchName=occt-${anOcctVersion}${anOcctVerSuffix}${aRevision}-${aPlatformAndCompiler}.tar.bz2
+  # finished
+  DURATION=$(($aTimePACK - $aTimeZERO))
+  echo Total time: $DURATION sec
+  logDuration 1 "Total" $aTimeZERO $aTimePACK
+
+  popd
+}
+
+for anArchIter in $anAbiList
+do
+  echo Platform: macOS ABI: ${anArchIter} Build: ${aBuildType}
+  buildArch $anArchIter
+done
+
+# create a FAT archive
+if [[ $toPackFat == 1 ]]; then
+  aSuffixFat=${aPlatform}${aBuildTypePrefix}-clang
+  aFatDir="${aCasSrc}/${aBuildRoot}/${aSuffixFat}"
+
+  # merge per-arch builds into fat builds
+  hasPlatform=0
+  for anArchIter in $anAbiList
+  do
+    aSuffixThin=${aPlatform}-${anArchIter}${aBuildTypePrefix}-clang
+    anArchDir="${aCasSrc}/${aBuildRoot}/${aSuffixThin}"
+    if [[ $hasPlatform == 0 ]]; then
+      hasPlatform=1
+      echo Packing FAT archive
+      rm -r -f "$aFatDir"
+      mkdir -p "$aFatDir"
+      if [[ $isStatic == 1 ]]; then
+        rsync -r -l --exclude '*.a' "$anArchDir/" "$aFatDir"
+      else
+        rsync -r -l --exclude '*.dylib' "$anArchDir/" "$aFatDir"
+      fi
+      rm -f "$aFatDir/build_target.txt"
+
+      if [[ -L "$anArchDir/bin/DRAWEXE" ]]; then
+        aDrawExe=$(readlink "$anArchDir/bin/DRAWEXE")
+        rm $aFatDir/bin/$aDrawExe
+        lipo "$anArchDir/bin/$aDrawExe" -output "$aFatDir/bin/$aDrawExe" -create
+      fi
+
+      for aLibIter in $anArchDir/lib/*.$aLibExt; do
+        aLibName=`basename $aLibIter`
+        if [[ -L "$anArchDir/lib/$aLibName" ]]; then
+          cp -a "$anArchDir/lib/$aLibName" "$aFatDir/lib/"
+        else
+          lipo "$anArchDir/lib/$aLibName" -output "$aFatDir/lib/$aLibName" -create
+        fi
+      done
+    else
+      if [[ -L "$anArchDir/bin/DRAWEXE" ]]; then
+        aDrawExe=$(readlink "$anArchDir/bin/DRAWEXE")
+        lipo "$aFatDir/bin/$aDrawExe" "$anArchDir/bin/$aDrawExe" -output "$aFatDir/bin/$aDrawExe" -create
+      fi
+
+      for aLibIter in $aFatDir/lib/*.$aLibExt; do
+        aLibName=`basename $aLibIter`
+        if [[ ! -L "$anArchDir/lib/$aLibName" ]]; then
+          lipo "$aFatDir/lib/$aLibName" "$anArchDir/lib/$aLibName" -output "$aFatDir/lib/$aLibName" -create
+          #lipo -info "$aFatDir/lib/$aLibName"
+        fi
+      done
+    fi
+    cat "$anArchDir/build_target.txt" >> "$aFatDir/build_target.txt"
+  done
+
+  # create an archive
+  anArchName=occt-${anOcctVersion}${anOcctVerSuffix}${aRevision}-${aSuffixFat}.tar.bz2
   echo Creating an archive ${aCasSrc}/${aBuildRoot}/${anArchName}...
-  rm ${aDestDir}/../${anArchName} &>/dev/null
-  pushd "$aDestDir"
-  tar -jcf ${aDestDir}/../${anArchName} *
+  rm ${aFatDir}/../${anArchName} &>/dev/null
+  pushd "$aFatDir"
+  tar -jcf ${aFatDir}/../${anArchName} *
   popd
 fi
-aTimePACK=$SECONDS
-logDuration $toPack "Packing archive" $aTimeINSTALL $aTimePACK
-
-# finished
-DURATION=$(($aTimePACK - $aTimeZERO))
-echo Total time: $DURATION sec
-logDuration 1 "Total" $aTimeZERO $aTimePACK
-
-popd

adm/scripts/macos_custom.sh.template

@@ -12,12 +12,14 @@ export aDraco="$aSrcRoot/../3rdparty/draco-1.4.1-macos"
 #export toMake=1
 #export toInstall=1
 #export toPack=1
+#export toPackFat=1
 
 #export BUILD_ModelingData=ON
 #export BUILD_ModelingAlgorithms=ON
 #export BUILD_Visualization=ON
 #export BUILD_ApplicationFramework=ON
 #export BUILD_DataExchange=ON
+#export BUILD_DETools=OFF
 #export BUILD_Draw=ON
 
 #export USE_RAPIDJSON=ON
@@ -25,5 +27,6 @@ export aDraco="$aSrcRoot/../3rdparty/draco-1.4.1-macos"
 #export USE_FREEIMAGE=ON
 
 #export MACOSX_DEPLOYMENT_TARGET=10.10
-#export anAbi=arm64
-#export anAbi=x86_64
+#export anAbiList=arm64
+#export anAbiList=x86_64
+#export anAbiList="arm64 x86_64"

adm/scripts/mingw_build.bat

@@ -32,6 +32,7 @@ set "BUILD_ModelingAlgorithms=ON"
 set "BUILD_Visualization=ON"
 set "BUILD_ApplicationFramework=ON"
 set "BUILD_DataExchange=ON"
+set "BUILD_DETools=OFF"
 set "BUILD_Draw=ON"
 
 rem Optional 3rd-party libraries to enable
@@ -155,6 +156,7 @@ if ["%toCMake%"] == ["1"] (
  -D BUILD_MODULE_Visualization:BOOL="%BUILD_Visualization%" ^
  -D BUILD_MODULE_ApplicationFramework:BOOL="%BUILD_ApplicationFramework%" ^
  -D BUILD_MODULE_DataExchange:BOOL="%BUILD_DataExchange%" ^
+ -D BUILD_MODULE_DETools:BOOL="%BUILD_DETools%" ^
  -D BUILD_MODULE_Draw:BOOL="%BUILD_Draw%" ^
  -D 3RDPARTY_TCL_DIR:PATH="%aTclTk%" ^
  -D 3RDPARTY_TCL_INCLUDE_DIR:FILEPATH="%aTclTk%/include" ^

adm/scripts/mingw_custom.bat.template

@@ -22,6 +22,7 @@ rem set "BUILD_ModelingAlgorithms=ON"
 rem set "BUILD_Visualization=ON"
 rem set "BUILD_ApplicationFramework=ON"
 rem set "BUILD_DataExchange=ON"
+rem set "BUILD_DETools=OFF"
 rem set "BUILD_Draw=ON"
 
 rem set "USE_RAPIDJSON=ON"

adm/scripts/wasm_build.bat

@@ -32,6 +32,7 @@ set "BUILD_ModelingAlgorithms=ON"
 set "BUILD_Visualization=ON"
 set "BUILD_ApplicationFramework=ON"
 set "BUILD_DataExchange=ON"
+set "BUILD_DETools=OFF"
 set "BUILD_Draw=OFF"
 
 rem Optional 3rd-party libraries to enable
@@ -175,6 +176,7 @@ if ["%toCMake%"] == ["1"] (
  -D BUILD_MODULE_Visualization:BOOL="%BUILD_Visualization%" ^
  -D BUILD_MODULE_ApplicationFramework:BOOL="%BUILD_ApplicationFramework%" ^
  -D BUILD_MODULE_DataExchange:BOOL="%BUILD_DataExchange%" ^
+ -D BUILD_MODULE_DETools:BOOL="%BUILD_DETools%" ^
  -D BUILD_MODULE_Draw:BOOL="%BUILD_Draw%" ^
  -D BUILD_DOC_Overview:BOOL="OFF" ^
  -D USE_FREETYPE:BOOL="%USE_FREETYPE%" ^

adm/scripts/wasm_build.sh

@@ -20,6 +20,7 @@ export BUILD_ModelingAlgorithms=ON
 export BUILD_Visualization=ON
 export BUILD_ApplicationFramework=ON
 export BUILD_DataExchange=ON
+export BUILD_DETools=OFF
 
 if [ -f "${aScriptDir}/wasm_custom.sh" ] ; then
   . "${aScriptDir}/wasm_custom.sh"
@@ -74,6 +75,7 @@ echo cmake -G "Unix Makefiles" -DCMAKE_TOOLCHAIN_FILE:FILEPATH="${aToolchain}" \
 -DBUILD_MODULE_Visualization:BOOL="${BUILD_Visualization}" \
 -DBUILD_MODULE_ApplicationFramework:BOOL="${BUILD_ApplicationFramework}" \
 -DBUILD_MODULE_DataExchange:BOOL="${BUILD_DataExchange}" \
+-DBUILD_MODULE_DETools:BOOL="${BUILD_DETools}" \
 -DBUILD_MODULE_Draw:BOOL="OFF" \
 -DBUILD_DOC_Overview:BOOL="OFF" "${aSrcRoot}"
 
@@ -92,6 +94,7 @@ cmake -G "Unix Makefiles" -DCMAKE_TOOLCHAIN_FILE:FILEPATH="${aToolchain}" \
 -DBUILD_MODULE_Visualization:BOOL="${BUILD_Visualization}" \
 -DBUILD_MODULE_ApplicationFramework:BOOL="${BUILD_ApplicationFramework}" \
 -DBUILD_MODULE_DataExchange:BOOL="${BUILD_DataExchange}" \
+-DBUILD_MODULE_DETools:BOOL="${BUILD_DETools}" \
 -DBUILD_MODULE_Draw:BOOL="OFF" \
 -DBUILD_DOC_Overview:BOOL="OFF" "${aSrcRoot}"
 

adm/scripts/wasm_custom.bat.template

@@ -23,6 +23,7 @@ rem set "BUILD_ModelingAlgorithms=ON"
 rem set "BUILD_Visualization=ON"
 rem set "BUILD_ApplicationFramework=ON"
 rem set "BUILD_DataExchange=ON"
+rem set "BUILD_DETools=OFF"
 
 rem set "USE_RAPIDJSON=ON"
 rem set "USE_DRACO=ON"

adm/scripts/wasm_custom.sh.template

@@ -14,3 +14,4 @@ export EMSDK_ROOT="$aSrcRoot/../emsdk"
 #export BUILD_Visualization=ON
 #export BUILD_ApplicationFramework=ON
 #export BUILD_DataExchange=ON
+#export BUILD_DETools=OFF

adm/svgdiff.bat

@@ -1,31 +0,0 @@
-@echo off
-rem Script to diff SVG images visually (as PNG) in TortoiseGit client
-rem 
-rem It assumes that Inkscape and TortoiseGitIDiff executables are either 
-rem installed in default locations in Program Files, or are accessible by PATH
-rem 
-rem To use this script for diffing SVG images, open TortoiseGit settings
-rem (Start -> Programs -> TortoiseGit -> Settings), select "Diff Viewer",
-rem click button "Advanced..." on the right tab and then add new record:
-rem - Extension: .svg
-rem - External program: <path to OCCT>\adm\svgdiff.bat %base %mine %bname %yname
-
-rem Remove double quotes around arguments
-set "f1=%1"
-set "f2=%2"
-set "f1=%f1:~1,-1%.png"
-set "f2=%f2:~1,-1%.png"
-
-rem Check if Inkscape and TortoiseGit are installed in default locations in 
-rem ProgramFiles; if not, assume they still may be accessible by PATH
-set "inkscape=%ProgramFiles%\Inkscape\inkscape.exe"
-if not exist "%inkscape%" set inkscape=inkscape.exe
-set "tgitidiff=%ProgramFiles%\TortoiseGit\bin\TortoiseGitIDiff.exe"
-if not exist "%tgitidiff%" set tgitidiff=TortoiseGitIDiff.exe
-
-rem Convert SVG to PNG using Inkscape
-"%inkscape%" -e "%f1%" %1
-"%inkscape%" -e "%f2%" %2
-
-rem Call Tortoise differ
-"%tgitidiff%" /left:"%f1%" /right:"%f2%" /lefttitle:%3 /righttitle:%4

adm/templates/build.bat

@@ -23,6 +23,8 @@ if "%VCVER%" == "vc8" (
   call "%VS141COMNTOOLS%/vsvars32.bat" > nul
 ) else if "%VCVER%" == "vc142" (
   call "%VS142COMNTOOLS%/vsvars32.bat" > nul
+) else if "%VCVER%" == "vc143" (
+  call "%VS143COMNTOOLS%/vsvars32.bat" > nul
 ) else (
   echo Error: wrong VS identifier
   exit /B

adm/templates/custom.build.bat.in

@@ -14,6 +14,7 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "TBB_DIR=@3RDPARTY_TBB_DLL_DIR@"
     set "VTK_DIR=@3RDPARTY_VTK_DLL_DIR@"
     set "FFMPEG_DIR=@3RDPARTY_FFMPEG_DLL_DIR@"
+    set "JEMALLOC_DIR=@3RDPARTY_JEMALLOC_LIBRARY_DIR@"
     set "OPENVR_DIR=@3RDPARTY_OPENVR_DLL_DIRS@"
 
     if not "@3RDPARTY_QT_DIR@" == "" (

adm/templates/custom.build.sh.in

@@ -12,6 +12,7 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TBB_DIR="@3RDPARTY_TBB_LIBRARY_DIR@"
     export VTK_DIR="@3RDPARTY_VTK_LIBRARY_DIR@"
     export FFMPEG_DIR="@3RDPARTY_FFMPEG_LIBRARY_DIR@"
+    export JEMALLOC_DIR="@3RDPARTY_JEMALLOC_LIBRARY_DIR@"
 
     if [ "x@3RDPARTY_QT_DIR" != "x" ]; then
       export QTDIR="@3RDPARTY_QT_DIR@"

adm/templates/custom.install.bat.in

@@ -16,6 +16,7 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "TBB_DIR=@USED_3RDPARTY_TBB_DIR@"
     set "VTK_DIR=@USED_3RDPARTY_VTK_DIR@"
     set "FFMPEG_DIR=@USED_3RDPARTY_FFMPEG_DIR@"
+    set "JEMALLOC_DIR=@USED_3RDPARTY_JEMALLOC_DIR@"
     set "OPENVR_DIR=@USED_3RDPARTY_OPENVR_DIR@"
 
     if not "@USED_3RDPARTY_QT_DIR@" == "" (

adm/templates/custom.install.sh.in

@@ -12,6 +12,7 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TBB_DIR="@USED_3RDPARTY_TBB_DIR@"
     export VTK_DIR="@USED_3RDPARTY_VTK_DIR@"
     export FFMPEG_DIR="@USED_3RDPARTY_FFMPEG_DIR@"
+    export JEMALLOC_DIR="@USED_3RDPARTY_JEMALLOC_DIR@"
 
     if [ "x@USED_3RDPARTY_QT_DIR@" != "x" ]; then
       export QTDIR="@USED_3RDPARTY_QT_DIR@"

adm/templates/env.bat

@@ -131,6 +131,8 @@ if not "%DevEnvDir%" == "" (
   )
 ) else if /I "%VCFMT%" == "gcc" (
   rem MinGW
+) else if /I "%VCFMT%" == "clang" (
+  rem clang
 ) else (
   echo Error: first argument ^(%VCVER%^) should specify supported version of Visual C++, 
   echo one of: 
@@ -184,6 +186,8 @@ if /I "%VCFMT%" == "vc9" (
   set "VCPlatformToolSet=ClangCL"
 ) else if /I "%VCFMT%" == "gcc" (
   rem MinGW
+) else if /I "%VCFMT%" == "clang" (
+  rem clang
 ) else (
   echo Error: wrong VS identifier
   exit /B

adm/templates/env.bat.in

@@ -21,7 +21,7 @@ rem ----- Decode VCVER variable and define related ones -----
 rem
 rem VCFMT - "vc" followed by full version number of Visual Studio toolset
 rem         (same as VCVER without optional suffix "-uwp")
-rem VCLIB - name of folder contining binaries
+rem VCLIB - name of folder containing binaries
 rem         (same as VCVER except without third version in number)
 rem VCPROP - name of required Visual Studion Workload (starting with VS 2017)
 rem
@@ -74,8 +74,14 @@ if not "%DevEnvDir%" == "" (
   for /f "usebackq delims=" %%i in (`vswhere.exe -version "[16.0,16.99]" -latest -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
     set "DevEnvDir=%%i\Common7\IDE\"
   )  
+) else if /I "%VCFMT%" == "vc143" (
+  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[17.0,17.99]" -latest -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
+    set "DevEnvDir=%%i\Common7\IDE\"
+  ) 
 ) else if /I "%VCFMT%" == "gcc" (
   rem MinGW
+) else if /I "%VCFMT%" == "clang" (
+  rem clang
 ) else (
   echo Error: wrong VS identifier
   exit /B
@@ -107,8 +113,15 @@ if /I "%VCFMT%" == "vc9" (
     set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
   ) 
   set "VCPlatformToolSet=v142"
+) else if /I "%VCFMT%" == "vc143" (
+  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[17.0,17.99]" -latest -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
+    set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
+  ) 
+  set "VCPlatformToolSet=v142"  
 ) else if /I "%VCFMT%" == "gcc" (
   rem MinGW
+) else if /I "%VCFMT%" == "clang" (
+  rem clang
 ) else (
   echo Error: first argument ^(%VCVER%^) should specify supported version of Visual C++,
   echo one of: vc10 ^(VS 2010 SP3^), vc11 ^(VS 2012 SP3^), vc12 ^(VS 2013^) or vc14 ^(VS 2015^)
@@ -126,11 +139,16 @@ if ["%ARCH%"] == ["64"] set VCARCH=amd64
 
 if /I ["%1"] == ["vc141"] set "VCVER=vc14"
 if /I ["%1"] == ["vc142"] set "VCVER=vc14"
+if /I ["%1"] == ["vc143"] set "VCVER=vc14"
 
 if exist "%CASROOT%\custom.bat" (
   call "%CASROOT%\custom.bat" %VCVER% %ARCH% %CASDEB%
 )
 
+if not ["%QTDIR%"] == [""] (
+  set "PATH=%QTDIR%/bin;%PATH%"
+  set "QT_PLUGIN_PATH=%QTDIR%/plugins"
+)
 if not ["%TCL_DIR%"] == [""]           set "PATH=%TCL_DIR%;%PATH%"
 if not ["%TK_DIR%"] == [""]            set "PATH=%TK_DIR%;%PATH%"
 if not ["%FREETYPE_DIR%"] == [""]      set "PATH=%FREETYPE_DIR%;%PATH%"
@@ -140,11 +158,8 @@ if not ["%GLES2_DIR%"] == [""]         set "PATH=%GLES2_DIR%;%PATH%"
 if not ["%TBB_DIR%"] == [""]           set "PATH=%TBB_DIR%;%PATH%"
 if not ["%VTK_DIR%"] == [""]           set "PATH=%VTK_DIR%;%PATH%"
 if not ["%FFMPEG_DIR%"] == [""]        set "PATH=%FFMPEG_DIR%;%PATH%"
+if not ["%JEMALLOC_DIR%"] == [""]      set "PATH=%JEMALLOC_DIR%;%PATH%"
 if not ["%OPENVR_DIR%"] == [""]        set "PATH=%OPENVR_DIR%;%PATH%"
-if not ["%QTDIR%"] == [""] (
-  set "PATH=%QTDIR%/bin;%PATH%"
-  set "QT_PLUGIN_PATH=%QTDIR%/plugins"
-)
 
 rem ----- Set path to 3rd party and OCCT libraries -----
 if not "%CSF_OCCTBinPath%" == "" (

adm/templates/env.build.sh.in

@@ -21,7 +21,7 @@ shopt -u nocasematch
 
 # ----- Set path to 3rd party and OCCT libraries -----
 anArch=`uname -m`
-if [ "$anArch" != "x86_64" ] && [ "$anArch" != "ia64" ]; then
+if [ "$anArch" != "x86_64" ] && [ "$anArch" != "ia64" ] && [ "$anArch" != "aarch64"]; then
   export ARCH="32";
 else
   export ARCH="64";
@@ -69,6 +69,10 @@ if [ "$FFMPEG_DIR" != "" ]; then
   THRDPARTY_PATH="${FFMPEG_DIR}:${THRDPARTY_PATH}"
 fi
 
+if [ "$JEMALLOC_DIR" != "" ]; then
+  THRDPARTY_PATH="${JEMALLOC_DIR}:${THRDPARTY_PATH}"
+fi
+
 if [ "$QTDIR" != "" ]; then
   THRDPARTY_PATH="${QTDIR}/lib:${THRDPARTY_PATH}"
 fi

adm/templates/env.install.sh.in

@@ -23,7 +23,7 @@ shopt -u nocasematch
 
 # ----- Set path to 3rd party and OCCT libraries -----
 anArch=`uname -m`
-if [ "$anArch" != "x86_64" ] && [ "$anArch" != "ia64" ]; then
+if [ "$anArch" != "x86_64" ] && [ "$anArch" != "ia64" ] && [ "$anArch" != "aarch64"]; then
   export ARCH="32";
 else
   export ARCH="64";
@@ -71,6 +71,10 @@ if [ "$FFMPEG_DIR" != "" ]; then
   THRDPARTY_PATH="${FFMPEG_DIR}:${THRDPARTY_PATH}"
 fi
 
+if [ "$JEMALLOC_DIR" != "" ]; then
+  THRDPARTY_PATH="${JEMALLOC_DIR}:${THRDPARTY_PATH}"
+fi
+
 if [ "$QTDIR" != "" ]; then
   THRDPARTY_PATH="${QTDIR}/lib:${THRDPARTY_PATH}"
 fi

adm/templates/env.samples.bat.in

@@ -7,6 +7,7 @@ if exist "%~dp0custom.bat" (
 call "@INSTALL_DIR_ABSOLUTE@\@INSTALL_DIR_SCRIPT@\env.bat" %1 %2 %3
 if /I ["%1"] == ["vc141"] set "VCVER=vc141"
 if /I ["%1"] == ["vc142"] set "VCVER=vc142"
+if /I ["%1"] == ["vc143"] set "VCVER=vc143"
 set "BIN_DIR=win%ARCH%\%VCVER%\bind"
 set "LIB_DIR=win%ARCH%\%VCVER%\libd"
 

adm/templates/env.sh

@@ -104,7 +104,7 @@ fi
 
 export CSF_OPT_CMPL=""
 
-# Optiona 3rd-parties should be enabled by HAVE macros
+# Optional 3rd-parties should be enabled by HAVE macros
 if [ "$HAVE_TBB"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_TBB"; fi
 if [ "$HAVE_OPENCL"    == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_OPENCL"; fi
 if [ "$HAVE_TK"        == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_TK"; fi

adm/templates/install.bat

@@ -23,6 +23,8 @@ if "%VCVER%" == "vc8" (
   call "%VS141COMNTOOLS%/vsvars32.bat" > nul
 ) else if "%VCVER%" == "vc142" (
   call "%VS142COMNTOOLS%/vsvars32.bat" > nul
+) else if "%VCVER%" == "vc143" (
+  call "%VS143COMNTOOLS%/vsvars32.bat" > nul
 ) else (
   echo Error: wrong VS identifier
   exit /B

adm/templates/template.plist

@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-<dict>
-	<key>SchemeUserState</key>
-	<dict>
-		<key>__TOOLKIT_NAME__.xcscheme</key>
-		<dict>
-			<key>orderHint</key>
-			<integer>0</integer>
-		</dict>
-	</dict>
-	<key>SuppressBuildableAutocreation</key>
-	<dict>
-		<key>__TOOLKIT_GUID__</key>
-		<dict>
-			<key>primary</key>
-			<true/>
-		</dict>
-	</dict>
-</dict>
-</plist>

adm/templates/template.vc10

@@ -1,278 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|Win32">
-      <Configuration>Debug</Configuration>
-      <Platform>Win32</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|Win32">
-      <Configuration>Release</Configuration>
-      <Platform>Win32</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Debug|x64">
-      <Configuration>Debug</Configuration>
-      <Platform>x64</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|x64">
-      <Configuration>Release</Configuration>
-      <Platform>x64</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>__PROJECT_GUID__</ProjectGuid>
-    __UWP_PROPERTIES__
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
-    <ConfigurationType>DynamicLibrary</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-    <CharacterSet>__VCCHARSET__</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
-    <ConfigurationType>DynamicLibrary</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-    <CharacterSet>__VCCHARSET__</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
-    <ConfigurationType>DynamicLibrary</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-    <CharacterSet>__VCCHARSET__</CharacterSet>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
-    <ConfigurationType>DynamicLibrary</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-    <CharacterSet>__VCCHARSET__</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup>
-    <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\..\..\..\win32\__VCVER__\bin\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\..\..\..\win32\__VCVER__\obj\__TKNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\..\..\..\win32\__VCVER__\bind\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\..\..\..\win32\__VCVER__\objd\__TKNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</LinkIncremental>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">.\..\..\..\win64\__VCVER__\bin\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">.\..\..\..\win64\__VCVER__\obj\__TKNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">.\..\..\..\win64\__VCVER__\bind\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">.\..\..\..\win64\__VCVER__\objd\__TKNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</LinkIncremental>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
-    <Midl>
-      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>Win32</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win32\__VCVER__\bin\__TKNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>/bigobj %(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>MaxSpeed</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <StringPooling>true</StringPooling>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\obj\__TKNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win32\__VCVER__\obj\__TKNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win32\__VCVER__\obj\__TKNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <FloatingPointModel>Precise</FloatingPointModel>
-      <PrecompiledHeader>NotUsing</PrecompiledHeader>
-      __VCMPL32__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
-      <OutputFile>.\..\..\..\win32\__VCVER__\bin\__TKNAM__.dll</OutputFile>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\lib;$(CSF_OPT_LIB32);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>__VCReleasePDB__</GenerateDebugInformation>
-      <ProgramDatabaseFile>.\..\..\..\win32\__VCVER__\bin\__TKNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win32\__VCVER__\lib\__TKNAM__.lib</ImportLibrary>
-      __VCLNKREL__
-      __UWP_GENERATE_METADATA__
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
-    <Midl>
-      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>Win32</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win32\__VCVER__\bind\__TKNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>%(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>Disabled</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
-      <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win32\__VCVER__\objd\__TKNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win32\__VCVER__\objd\__TKNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
-      <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
-      <FloatingPointModel>Precise</FloatingPointModel>
-      <PrecompiledHeader>NotUsing</PrecompiledHeader>
-      __VCMPL32__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP_DEBUG__</AdditionalDependencies>
-      <OutputFile>.\..\..\..\win32\__VCVER__\bind\__TKNAM__.dll</OutputFile>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\libd;$(CSF_OPT_LIB32D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <ProgramDatabaseFile>..\..\..\win32\__VCVER__\bind\__TKNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win32\__VCVER__\libd\__TKNAM__.lib</ImportLibrary>
-      __UWP_GENERATE_METADATA__
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
-    <Midl>
-      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>x64</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win64\__VCVER__\bin\__TKNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>%(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>MaxSpeed</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <StringPooling>true</StringPooling>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\obj\__TKNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win64\__VCVER__\obj\__TKNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win64\__VCVER__\obj\__TKNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <FloatingPointModel>Precise</FloatingPointModel>
-      <PrecompiledHeader>NotUsing</PrecompiledHeader>
-      __VCMPL64__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
-      <OutputFile>.\..\..\..\win64\__VCVER__\bin\__TKNAM__.dll</OutputFile>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\lib;$(CSF_OPT_LIB64);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>__VCReleasePDB__</GenerateDebugInformation>
-      <ProgramDatabaseFile>.\..\..\..\win64\__VCVER__\bin\__TKNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win64\__VCVER__\lib\__TKNAM__.lib</ImportLibrary>
-      __VCLNKREL__
-      __UWP_GENERATE_METADATA__
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
-    <Midl>
-      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>x64</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win64\__VCVER__\bind\__TKNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>%(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>Disabled</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
-      <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win64\__VCVER__\objd\__TKNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win64\__VCVER__\objd\__TKNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
-      <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
-      <FloatingPointModel>Precise</FloatingPointModel>
-      <PrecompiledHeader>NotUsing</PrecompiledHeader>
-      __VCMPL64__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP_DEBUG__</AdditionalDependencies>
-      <OutputFile>.\..\..\..\win64\__VCVER__\bind\__TKNAM__.dll</OutputFile>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\libd;$(CSF_OPT_LIB64D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <ProgramDatabaseFile>..\..\..\win64\__VCVER__\bind\__TKNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win64\__VCVER__\libd\__TKNAM__.lib</ImportLibrary>
-      __UWP_GENERATE_METADATA__
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-__FILES__
-  </ItemGroup>
-  <ItemGroup>
-    <ResourceCompile Include="__TKNAM__.rc" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

adm/templates/template.vc10x

@@ -1,259 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|Win32">
-      <Configuration>Debug</Configuration>
-      <Platform>Win32</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|Win32">
-      <Configuration>Release</Configuration>
-      <Platform>Win32</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Debug|x64">
-      <Configuration>Debug</Configuration>
-      <Platform>x64</Platform>
-    </ProjectConfiguration>
-    <ProjectConfiguration Include="Release|x64">
-      <Configuration>Release</Configuration>
-      <Platform>x64</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>__PROJECT_GUID__</ProjectGuid>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
-    <ConfigurationType>__CONF__</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
-    <ConfigurationType>__CONF__</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
-    <ConfigurationType>__CONF__</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
-    <ConfigurationType>__CONF__</ConfigurationType>
-    <PlatformToolset>__VCVEREXT__</PlatformToolset>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <ImportGroup Label="ExtensionSettings">
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
-    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
-  </ImportGroup>
-  <PropertyGroup Label="UserMacros" />
-  <PropertyGroup>
-    <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\..\..\..\win32\__VCVER__\bin\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\..\..\..\win32\__VCVER__\obj\__XQTNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\..\..\..\win32\__VCVER__\bind\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\..\..\..\win32\__VCVER__\objd\__XQTNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</LinkIncremental>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">.\..\..\..\win64\__VCVER__\bin\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">.\..\..\..\win64\__VCVER__\obj\__XQTNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">.\..\..\..\win64\__VCVER__\bind\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">.\..\..\..\win64\__VCVER__\objd\__XQTNAM__\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</LinkIncremental>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
-    <Midl>
-      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>Win32</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win32\__VCVER__\bin\__XQTNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>%(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>MaxSpeed</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <StringPooling>true</StringPooling>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\obj\__XQTNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win32\__VCVER__\obj\__XQTNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win32\__VCVER__\obj\__XQTNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <FloatingPointModel>Precise</FloatingPointModel>__VCMPL32__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\lib;$(CSF_OPT_LIB32);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>__VCReleasePDB__</GenerateDebugInformation>
-      <ProgramDatabaseFile>.\..\..\..\win32\__VCVER__\bin\__XQTNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win32\__VCVER__\lib\__XQTNAM__.lib</ImportLibrary>
-      <AdditionalOptions>/LARGEADDRESSAWARE %(AdditionalOptions)</AdditionalOptions>
-      __VCLNKREL__
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
-    <Midl>
-      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>Win32</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win32\__VCVER__\bind\__XQTNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>%(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>Disabled</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
-      <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win32\__VCVER__\objd\__XQTNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win32\__VCVER__\objd\__XQTNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
-      <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
-      <FloatingPointModel>Precise</FloatingPointModel>__VCMPL32__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP_DEBUG__</AdditionalDependencies>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\libd;$(CSF_OPT_LIB32D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <ProgramDatabaseFile>..\..\..\win32\__VCVER__\bind\__XQTNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win32\__VCVER__\libd\__XQTNAM__.lib</ImportLibrary>
-      <AdditionalOptions>/LARGEADDRESSAWARE %(AdditionalOptions)</AdditionalOptions>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
-    <Midl>
-      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>x64</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win64\__VCVER__\bin\__XQTNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>%(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>MaxSpeed</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <StringPooling>true</StringPooling>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
-      <FunctionLevelLinking>true</FunctionLevelLinking>
-      <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\obj\__XQTNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win64\__VCVER__\obj\__XQTNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win64\__VCVER__\obj\__XQTNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <FloatingPointModel>Precise</FloatingPointModel>__VCMPL64__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\lib;$(CSF_OPT_LIB64);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>__VCReleasePDB__</GenerateDebugInformation>
-      <ProgramDatabaseFile>.\..\..\..\win64\__VCVER__\bin\__XQTNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win64\__VCVER__\lib\__XQTNAM__.lib</ImportLibrary>
-      __VCLNKREL__
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
-    <Midl>
-      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MkTypLibCompatible>true</MkTypLibCompatible>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <TargetEnvironment>x64</TargetEnvironment>
-      <TypeLibraryName>.\..\..\..\win64\__VCVER__\bind\__XQTNAM__.tlb</TypeLibraryName>
-      <HeaderFileName>
-      </HeaderFileName>
-    </Midl>
-    <ClCompile>
-      <AdditionalOptions>%(AdditionalOptions)</AdditionalOptions>
-      <AdditionalIncludeDirectories>__TKINC__;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <MultiProcessorCompilation>true</MultiProcessorCompilation>
-      <Optimization>Disabled</Optimization>
-      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <ExceptionHandling>Async</ExceptionHandling>
-      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
-      <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
-      <ObjectFileName>.\..\..\..\win64\__VCVER__\objd\__XQTNAM__/</ObjectFileName>
-      <ProgramDataBaseFileName>.\..\..\..\win64\__VCVER__\objd\__XQTNAM__/</ProgramDataBaseFileName>
-      <WarningLevel>Level4</WarningLevel>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
-      <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
-      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
-      <FloatingPointModel>Precise</FloatingPointModel>__VCMPL64__
-    </ClCompile>
-    <ResourceCompile>
-      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;__TKDEFINES__;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-    <Link>
-      <AdditionalDependencies>__TKDEP_DEBUG__</AdditionalDependencies>
-      <SuppressStartupBanner>true</SuppressStartupBanner>
-      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\libd;$(CSF_OPT_LIB64D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
-      <GenerateDebugInformation>true</GenerateDebugInformation>
-      <ProgramDatabaseFile>..\..\..\win64\__VCVER__\bind\__XQTNAM__.pdb</ProgramDatabaseFile>
-      <SubSystem>Console</SubSystem>
-      <ImportLibrary>..\..\..\win64\__VCVER__\libd\__XQTNAM__.lib</ImportLibrary>
-    </Link>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-__FILES__
-  </ItemGroup>
-  <ItemGroup>
-    <ResourceCompile Include="__XQTNAM__.rc" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-  <ImportGroup Label="ExtensionTargets">
-  </ImportGroup>
-</Project>

adm/templates/template.vc7

@@ -1,160 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="7.10"
-	Name="__TKNAM__"
-	SccProjectName=""
-	SccLocalPath="">
-	<Platforms>
-		<Platform
-			Name="Win32"/>
-	</Platforms>
-	<Configurations>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory=".\..\..\..\win32\vc7\bin"
-			IntermediateDirectory=".\..\..\..\win32\vc7\obj\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-				StringPooling="TRUE"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="TRUE"
-				PrecompiledHeaderFile=".\..\..\..\win32\vc7\obj\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win32\vc7\obj\__TKNAM__/"
-				ObjectFile=".\..\..\..\win32\vc7\obj\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc7\obj\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="TRUE"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ opengl32.lib ws2_32.lib odbc32.lib odbccp32.lib"
-				OutputFile=".\..\..\..\win32\vc7\bin\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="TRUE"
-				AdditionalLibraryDirectories="..\..\..\win32\vc7\lib;$(CSF_OPT_LIB32)"
-				ProgramDatabaseFile=".\..\..\..\win32\vc7\bin\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win32\vc7\lib\__TKNAM__.lib"
-				TargetMachine="1"/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="TRUE"
-				SuppressStartupBanner="TRUE"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc7\bin\__TKNAM__.tlb"
-				HeaderFileName=""/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-				Culture="1036"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"/>
-			<Tool
-				Name="VCWebDeploymentTool"/>
-			<Tool
-				Name="VCManagedWrapperGeneratorTool"/>
-			<Tool
-				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
-		</Configuration>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory=".\..\..\..\win32\vc7\bind"
-			IntermediateDirectory=".\..\..\..\win32\vc7\objd\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE"
-			ManagedExtensions="FALSE"
-			WholeProgramOptimization="FALSE">
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				PrecompiledHeaderFile=".\..\..\..\win32\vc7\objd\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win32\vc7\objd\__TKNAM__/"
-				ObjectFile=".\..\..\..\win32\vc7\objd\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc7\objd\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="TRUE"
-				Detect64BitPortabilityProblems="FALSE"
-				DebugInformationFormat="3"
-				CompileAs="0"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ opengl32.lib ws2_32.lib odbc32.lib odbccp32.lib"
-				OutputFile=".\..\..\..\win32\vc7\bind\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="TRUE"
-				AdditionalLibraryDirectories="..\..\..\win32\vc7\libd;$(CSF_OPT_LIB32D)"
-				GenerateDebugInformation="TRUE"
-				ProgramDatabaseFile="..\..\..\win32\vc7\bind\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win32\vc7\libd\__TKNAM__.lib"/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="TRUE"
-				SuppressStartupBanner="TRUE"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc7\bind\__TKNAM__.tlb"
-				HeaderFileName=""/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-				Culture="1036"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"/>
-			<Tool
-				Name="VCWebDeploymentTool"/>
-			<Tool
-				Name="VCManagedWrapperGeneratorTool"/>
-			<Tool
-				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
-		</Configuration>
-	</Configurations>
-	<References>
-	</References>
-	<Files>
-		<Filter
-			Name="Source files"
-			Filter="">
-__FILES__
-			<File RelativePath="__TKNAM__.rc"></File>
-		</Filter>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>

adm/templates/template.vc7x

@@ -1,152 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="7.10"
-	Name="__XQTNAM__"
-	ProjectGUID="{193A5B07-7F8B-4280-9F4E-32D5F326DFC5}"
-	SccProjectName=""
-	SccLocalPath="">
-	<Platforms>
-		<Platform
-			Name="Win32"/>
-	</Platforms>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory=".\..\..\..\win32\vc7\bind"
-			IntermediateDirectory=".\..\..\..\win32\vc7\objd\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				AssemblerListingLocation=".\..\..\..\win32\vc7\objd\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win32\vc7\objd\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc7\objd\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="TRUE"
-				DebugInformationFormat="3"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				LinkIncremental="1"
-				SuppressStartupBanner="TRUE"
-				AdditionalLibraryDirectories="..\..\..\win32\vc7\libd;$(CSF_OPT_LIB32D)"
-				GenerateDebugInformation="TRUE"
-				ProgramDatabaseFile=".\..\..\..\win32\vc7\bind\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win32\vc7\libd\__XQTNAM__.lib"
-				TargetMachine="1"/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="TRUE"
-				SuppressStartupBanner="TRUE"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc7\bind\__XQTNAM__.tlb"
-				HeaderFileName=""/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-				Culture="1033"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"/>
-			<Tool
-				Name="VCWebDeploymentTool"/>
-			<Tool
-				Name="VCManagedWrapperGeneratorTool"/>
-			<Tool
-				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory=".\..\..\..\win32\vc7\bin"
-			IntermediateDirectory=".\..\..\..\win32\vc7\obj\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-				StringPooling="TRUE"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="TRUE"
-				AssemblerListingLocation=".\..\..\..\win32\vc7\obj\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win32\vc7\obj\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc7\obj\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="TRUE"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				LinkIncremental="1"
-				SuppressStartupBanner="TRUE"
-				AdditionalLibraryDirectories="..\..\..\win32\vc7\lib;$(CSF_OPT_LIB32)"
-				ProgramDatabaseFile=".\..\..\..\win32\vc7\bin\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win32\vc7\lib\__XQTNAM__.lib"
-				TargetMachine="1"/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="TRUE"
-				SuppressStartupBanner="TRUE"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc7\bin\__XQTNAM__.tlb"
-				HeaderFileName=""/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-				Culture="1033"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"/>
-			<Tool
-				Name="VCWebDeploymentTool"/>
-			<Tool
-				Name="VCManagedWrapperGeneratorTool"/>
-			<Tool
-				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
-		</Configuration>
-	</Configurations>
-	<References>
-	</References>
-	<Files>
-		<Filter
-			Name="Source Files"
-			Filter="">
-__FILES__
-		</Filter>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>

adm/templates/template.vc8

@@ -1,428 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="8.00"
-	Name="__TKNAM__"
-	ProjectGUID="__PROJECT_GUID__"
-	>
-	<Platforms>
-		<Platform
-			Name="Win32"
-		/>
-		<Platform
-			Name="x64"
-		/>
-	</Platforms>
-	<ToolFiles>
-	</ToolFiles>
-	<Configurations>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory=".\..\..\..\win32\vc8\bin"
-			IntermediateDirectory=".\..\..\..\win32\vc8\obj\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc8\bin\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win32\vc8\obj\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win32\vc8\obj\__TKNAM__/"
-				ObjectFile=".\..\..\..\win32\vc8\obj\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc8\obj\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				EnableEnhancedInstructionSet="2"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-				Culture="1036"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ opengl32.lib ws2_32.lib odbc32.lib odbccp32.lib"
-				OutputFile=".\..\..\..\win32\vc8\bin\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc8\lib;$(CSF_OPT_LIB32)"
-				ProgramDatabaseFile=".\..\..\..\win32\vc8\bin\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win32\vc8\lib\__TKNAM__.lib"
-				TargetMachine="1"
-			/>
-			<Tool
- 				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory=".\..\..\..\win32\vc8\bind"
-			IntermediateDirectory=".\..\..\..\win32\vc8\objd\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			ManagedExtensions="0"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc8\bind\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win32\vc8\objd\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win32\vc8\objd\__TKNAM__/"
-				ObjectFile=".\..\..\..\win32\vc8\objd\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc8\objd\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				Detect64BitPortabilityProblems="false"
-				DebugInformationFormat="3"
-				CompileAs="0"
-				EnableEnhancedInstructionSet="2"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-				Culture="1036"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ opengl32.lib ws2_32.lib odbc32.lib odbccp32.lib"
-				OutputFile=".\..\..\..\win32\vc8\bind\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc8\libd;$(CSF_OPT_LIB32D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile="..\..\..\win32\vc8\bind\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win32\vc8\libd\__TKNAM__.lib"
-				TargetMachine="1"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|x64"
-			OutputDirectory=".\..\..\..\win64\vc8\bin"
-			IntermediateDirectory=".\..\..\..\win64\vc8\obj\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc8\bin\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="/favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win64\vc8\obj\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win64\vc8\obj\__TKNAM__/"
-				ObjectFile=".\..\..\..\win64\vc8\obj\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc8\obj\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-				Culture="1036"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ opengl32.lib ws2_32.lib odbc32.lib odbccp32.lib"
-				OutputFile=".\..\..\..\win64\vc8\bin\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc8\lib;$(CSF_OPT_LIB64)"
-				ProgramDatabaseFile=".\..\..\..\win64\vc8\bin\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win64\vc8\lib\__TKNAM__.lib"
-				TargetMachine="17"
-			/>
-			<Tool
- 				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|x64"
-			OutputDirectory=".\..\..\..\win64\vc8\bind"
-			IntermediateDirectory=".\..\..\..\win64\vc8\objd\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			ManagedExtensions="0"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc8\bind\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="/favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win64\vc8\objd\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win64\vc8\objd\__TKNAM__/"
-				ObjectFile=".\..\..\..\win64\vc8\objd\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc8\objd\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				Detect64BitPortabilityProblems="false"
-				DebugInformationFormat="3"
-				CompileAs="0"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-				Culture="1036"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ opengl32.lib ws2_32.lib odbc32.lib odbccp32.lib"
-				OutputFile=".\..\..\..\win64\vc8\bind\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc8\libd;$(CSF_OPT_LIB64D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile="..\..\..\win64\vc8\bind\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win64\vc8\libd\__TKNAM__.lib"
-				TargetMachine="17"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-	</Configurations>
-	<References>
-	</References>
-	<Files>
-		<Filter
-			Name="Source files"
-			>
-__FILES__
-			<File RelativePath="__TKNAM__.rc"></File>
-		</Filter>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>

adm/templates/template.vc8x

@@ -1,413 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="8.00"
-	Name="__XQTNAM__"
-	ProjectGUID="__PROJECT_GUID__"
-	>
-	<Platforms>
-		<Platform
-			Name="Win32"
-		/>
-		<Platform
-			Name="x64"
-		/>
-	</Platforms>
-	<ToolFiles>
-	</ToolFiles>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory=".\..\..\..\win32\vc8\bind"
-			IntermediateDirectory=".\..\..\..\win32\vc8\objd\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc8\bind\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win32\vc8\objd\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win32\vc8\objd\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc8\objd\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				DebugInformationFormat="3"
-				EnableEnhancedInstructionSet="2"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES);"
-				Culture="1033"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc8\libd;$(CSF_OPT_LIB32D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile=".\..\..\..\win32\vc8\bind\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win32\vc8\libd\__XQTNAM__.lib"
-				TargetMachine="1"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory=".\..\..\..\win32\vc8\bin"
-			IntermediateDirectory=".\..\..\..\win32\vc8\obj\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc8\bin\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win32\vc8\obj\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win32\vc8\obj\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc8\obj\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				EnableEnhancedInstructionSet="2"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES);"
-				Culture="1033"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc8\lib;$(CSF_OPT_LIB32)"
-				ProgramDatabaseFile=".\..\..\..\win32\vc8\bin\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win32\vc8\lib\__XQTNAM__.lib"
-				TargetMachine="1"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|x64"
-			OutputDirectory=".\..\..\..\win64\vc8\bind"
-			IntermediateDirectory=".\..\..\..\win64\vc8\objd\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc8\bind\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="/favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win64\vc8\objd\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win64\vc8\objd\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc8\objd\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				DebugInformationFormat="3"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-				Culture="1033"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				OutputFile=".\..\..\..\win64\vc8\bind\__XQTNAM__.__XQTEXT__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc8\libd;$(CSF_OPT_LIB64D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile=".\..\..\..\win64\vc8\bind\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win64\vc8\libd\__XQTNAM__.lib"
-				TargetMachine="17"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|x64"
-			OutputDirectory=".\..\..\..\win64\vc8\bin"
-			IntermediateDirectory=".\..\..\..\win64\vc8\obj\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc8\bin\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="/favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win64\vc8\obj\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win64\vc8\obj\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc8\obj\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-				Culture="1033"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				OutputFile=".\..\..\..\win64\vc8\bin\__XQTNAM__.__XQTEXT__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc8\lib;$(CSF_OPT_LIB64)"
-				ProgramDatabaseFile=".\..\..\..\win64\vc8\bin\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win64\vc8\lib\__XQTNAM__.lib"
-				TargetMachine="17"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCWebDeploymentTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-	</Configurations>
-	<References>
-	</References>
-	<Files>
-		<Filter
-			Name="Source Files"
-			>
-__FILES__
-		</Filter>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>

adm/templates/template.vc9

@@ -1,419 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="9.00"
-	Name="__TKNAM__"
-	ProjectGUID="__PROJECT_GUID__"
-	TargetFrameworkVersion="0"
-	>
-	<Platforms>
-		<Platform
-			Name="Win32"
-		/>
-		<Platform
-			Name="x64"
-		/>
-	</Platforms>
-	<ToolFiles>
-	</ToolFiles>
-	<Configurations>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory=".\..\..\..\win32\vc9\bin"
-			IntermediateDirectory=".\..\..\..\win32\vc9\obj\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			CharacterSet="1"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc9\bin\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP /bigobj"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableEnhancedInstructionSet="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win32\vc9\obj\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win32\vc9\obj\__TKNAM__/"
-				ObjectFile=".\..\..\..\win32\vc9\obj\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc9\obj\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ ws2_32.lib"
-				OutputFile=".\..\..\..\win32\vc9\bin\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc9\lib;$(CSF_OPT_LIB32)"
-				ProgramDatabaseFile=".\..\..\..\win32\vc9\bin\__TKNAM__.pdb"
-				SubSystem="2"
-				RandomizedBaseAddress="1"
-				DataExecutionPrevention="0"
-				ImportLibrary="..\..\..\win32\vc9\lib\__TKNAM__.lib"
-				TargetMachine="1"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory=".\..\..\..\win32\vc9\bind"
-			IntermediateDirectory=".\..\..\..\win32\vc9\objd\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			CharacterSet="1"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc9\bind\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				EnableEnhancedInstructionSet="2"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win32\vc9\objd\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win32\vc9\objd\__TKNAM__/"
-				ObjectFile=".\..\..\..\win32\vc9\objd\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc9\objd\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				Detect64BitPortabilityProblems="false"
-				DebugInformationFormat="3"
-				CompileAs="0"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ ws2_32.lib"
-				OutputFile=".\..\..\..\win32\vc9\bind\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc9\libd;$(CSF_OPT_LIB32D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile="..\..\..\win32\vc9\bind\__TKNAM__.pdb"
-				SubSystem="2"
-				RandomizedBaseAddress="1"
-				ImportLibrary="..\..\..\win32\vc9\libd\__TKNAM__.lib"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|x64"
-			OutputDirectory=".\..\..\..\win64\vc9\bin"
-			IntermediateDirectory=".\..\..\..\win64\vc9\obj\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			CharacterSet="1"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc9\bin\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP -favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win64\vc9\obj\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win64\vc9\obj\__TKNAM__/"
-				ObjectFile=".\..\..\..\win64\vc9\obj\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc9\obj\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ ws2_32.lib"
-				OutputFile=".\..\..\..\win64\vc9\bin\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc9\lib;$(CSF_OPT_LIB64)"
-				ProgramDatabaseFile=".\..\..\..\win64\vc9\bin\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win64\vc9\lib\__TKNAM__.lib"
-				TargetMachine="X64"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|x64"
-			OutputDirectory=".\..\..\..\win64\vc9\bind"
-			IntermediateDirectory=".\..\..\..\win64\vc9\objd\__TKNAM__"
-			ConfigurationType="2"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			CharacterSet="1"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc9\bind\__TKNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP -favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				FloatingPointModel="0"
-				PrecompiledHeaderFile=".\..\..\..\win64\vc9\objd\__TKNAM__\__TKNAM__.pch"
-				AssemblerListingLocation=".\..\..\..\win64\vc9\objd\__TKNAM__/"
-				ObjectFile=".\..\..\..\win64\vc9\objd\__TKNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc9\objd\__TKNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				Detect64BitPortabilityProblems="false"
-				DebugInformationFormat="3"
-				CompileAs="0"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__ ws2_32.lib"
-				OutputFile=".\..\..\..\win64\vc9\bind\__TKNAM__.dll"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc9\libd;$(CSF_OPT_LIB64D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile="..\..\..\win64\vc9\bind\__TKNAM__.pdb"
-				SubSystem="2"
-				ImportLibrary="..\..\..\win64\vc9\libd\__TKNAM__.lib"
-				TargetMachine="X64"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-	</Configurations>
-	<References>
-	</References>
-	<Files>
-		<Filter
-			Name="Source files"
-			>
-__FILES__
-			<File RelativePath="__TKNAM__.rc"></File>
-		</Filter>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>

adm/templates/template.vc9x

@@ -1,400 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="9.00"
-	Name="__XQTNAM__"
-	ProjectGUID="__PROJECT_GUID__"
-	TargetFrameworkVersion="0"
-	>
-	<Platforms>
-		<Platform
-			Name="Win32"
-		/>
-		<Platform
-			Name="x64"
-		/>
-	</Platforms>
-	<ToolFiles>
-	</ToolFiles>
-	<Configurations>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory=".\..\..\..\win32\vc9\bin"
-			IntermediateDirectory=".\..\..\..\win32\vc9\obj\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc9\bin\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableEnhancedInstructionSet="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win32\vc9\obj\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win32\vc9\obj\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc9\obj\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc9\lib;$(CSF_OPT_LIB32)"
-				ProgramDatabaseFile=".\..\..\..\win32\vc9\bin\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win32\vc9\lib\__XQTNAM__.lib"
-				TargetMachine="1"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory=".\..\..\..\win32\vc9\bind"
-			IntermediateDirectory=".\..\..\..\win32\vc9\objd\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win32\vc9\bind\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				EnableEnhancedInstructionSet="2"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win32\vc9\objd\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win32\vc9\objd\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win32\vc9\objd\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				DebugInformationFormat="3"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win32\vc9\libd;$(CSF_OPT_LIB32D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile=".\..\..\..\win32\vc9\bind\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win32\vc9\libd\__XQTNAM__.lib"
-				TargetMachine="1"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|x64"
-			OutputDirectory=".\..\..\..\win64\vc9\bin"
-			IntermediateDirectory=".\..\..\..\win64\vc9\obj\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc9\bin\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP -favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				StringPooling="true"
-				ExceptionHandling="2"
-				RuntimeLibrary="2"
-				EnableFunctionLevelLinking="true"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win64\vc9\obj\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win64\vc9\obj\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc9\obj\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				OutputFile=".\..\..\..\win64\vc9\bin\__XQTNAM__.__XQTEXT__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc9\lib;$(CSF_OPT_LIB64)"
-				ProgramDatabaseFile=".\..\..\..\win64\vc9\bin\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win64\vc9\lib\__XQTNAM__.lib"
-				TargetMachine="X64"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|x64"
-			OutputDirectory=".\..\..\..\win64\vc9\bind"
-			IntermediateDirectory=".\..\..\..\win64\vc9\objd\__XQTNAM__"
-			ConfigurationType="__CONF__"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
-			>
-			<Tool
-				Name="VCPreBuildEventTool"
-			/>
-			<Tool
-				Name="VCCustomBuildTool"
-			/>
-			<Tool
-				Name="VCXMLDataGeneratorTool"
-			/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"
-			/>
-			<Tool
-				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				MkTypLibCompatible="true"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				TypeLibraryName=".\..\..\..\win64\vc9\bind\__XQTNAM__.tlb"
-				HeaderFileName=""
-			/>
-			<Tool
-				Name="VCCLCompilerTool"
-				AdditionalOptions="-MP -favor:blend"
-				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
-				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
-				ExceptionHandling="2"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="3"
-				FloatingPointModel="0"
-				AssemblerListingLocation=".\..\..\..\win64\vc9\objd\__XQTNAM__/"
-				ObjectFile=".\..\..\..\win64\vc9\objd\__XQTNAM__/"
-				ProgramDataBaseFileName=".\..\..\..\win64\vc9\objd\__XQTNAM__/"
-				WarningLevel="4"
-				SuppressStartupBanner="true"
-				DebugInformationFormat="3"
-			/>
-			<Tool
-				Name="VCManagedResourceCompilerTool"
-			/>
-			<Tool
-				Name="VCResourceCompilerTool"
-				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
-			/>
-			<Tool
-				Name="VCPreLinkEventTool"
-			/>
-			<Tool
-				Name="VCLinkerTool"
-				AdditionalDependencies="__TKDEP__"
-				OutputFile=".\..\..\..\win64\vc9\bind\__XQTNAM__.__XQTEXT__"
-				LinkIncremental="1"
-				SuppressStartupBanner="true"
-				AdditionalLibraryDirectories="..\..\..\win64\vc9\libd;$(CSF_OPT_LIB64D)"
-				GenerateDebugInformation="true"
-				ProgramDatabaseFile=".\..\..\..\win64\vc9\bind\__XQTNAM__.pdb"
-				SubSystem="1"
-				ImportLibrary="..\..\..\win64\vc9\libd\__XQTNAM__.lib"
-				TargetMachine="X64"
-			/>
-			<Tool
-				Name="VCALinkTool"
-			/>
-			<Tool
-				Name="VCManifestTool"
-			/>
-			<Tool
-				Name="VCXDCMakeTool"
-			/>
-			<Tool
-				Name="VCBscMakeTool"
-			/>
-			<Tool
-				Name="VCFxCopTool"
-			/>
-			<Tool
-				Name="VCAppVerifierTool"
-			/>
-			<Tool
-				Name="VCPostBuildEventTool"
-			/>
-		</Configuration>
-	</Configurations>
-	<References>
-	</References>
-	<Files>
-		<Filter
-			Name="Source Files"
-			>
-__FILES__
-		</Filter>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>

adm/templates/template.xcscheme

@@ -1,58 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Scheme
-   version = "1.3">
-   <BuildAction
-      parallelizeBuildables = "YES"
-      buildImplicitDependencies = "YES">
-      <BuildActionEntries>
-         <BuildActionEntry
-            buildForTesting = "YES"
-            buildForRunning = "YES"
-            buildForProfiling = "YES"
-            buildForArchiving = "YES"
-            buildForAnalyzing = "YES">
-            <BuildableReference
-               BuildableIdentifier = "primary"
-               BlueprintIdentifier = "__TOOLKIT_GUID__"
-               BuildableName = "lib__TOOLKIT_NAME__.dylib"
-               BlueprintName = "__TOOLKIT_NAME__"
-               ReferencedContainer = "container:__TOOLKIT_NAME__.xcodeproj">
-            </BuildableReference>
-         </BuildActionEntry>
-      </BuildActionEntries>
-   </BuildAction>
-   <TestAction
-      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
-      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
-      shouldUseLaunchSchemeArgsEnv = "YES"
-      buildConfiguration = "Debug">
-      <Testables>
-      </Testables>
-   </TestAction>
-   <LaunchAction
-      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
-      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
-      launchStyle = "0"
-      useCustomWorkingDirectory = "NO"
-      buildConfiguration = "Debug"
-      ignoresPersistentStateOnLaunch = "NO"
-      debugDocumentVersioning = "YES"
-      allowLocationSimulation = "YES">
-      <AdditionalOptions>
-      </AdditionalOptions>
-   </LaunchAction>
-   <ProfileAction
-      shouldUseLaunchSchemeArgsEnv = "YES"
-      savedToolIdentifier = ""
-      useCustomWorkingDirectory = "NO"
-      buildConfiguration = "Release"
-      debugDocumentVersioning = "YES">
-   </ProfileAction>
-   <AnalyzeAction
-      buildConfiguration = "Debug">
-   </AnalyzeAction>
-   <ArchiveAction
-      buildConfiguration = "Release"
-      revealArchiveInOrganizer = "YES">
-   </ArchiveAction>
-</Scheme>

adm/templates/template_dll.rc

@@ -1,30 +0,0 @@
-#include <windows.h>
-#include <Standard_Version.hxx>
-
-VS_VERSION_INFO VERSIONINFO
-FILEVERSION     OCC_VERSION_MAJOR, OCC_VERSION_MINOR, OCC_VERSION_MAINTENANCE, 0
-PRODUCTVERSION  OCC_VERSION_MAJOR, OCC_VERSION_MINOR, OCC_VERSION_MAINTENANCE, 0
-FILEFLAGSMASK   VS_FFI_FILEFLAGSMASK
-#ifdef _DEBUG
-FILEFLAGS VS_FF_DEBUG
-#endif
-FILEOS          VOS_NT
-FILETYPE        VFT_DLL
-FILESUBTYPE     VFT2_UNKNOWN
-BEGIN
-  BLOCK "StringFileInfo"
-  BEGIN BLOCK "040904E4" // Language type = U.S English(0x0409) and Character Set = Windows, Multilingual(0x04E4)
-    BEGIN
-      VALUE "FileDescription", "__TKNAM__ Toolkit\000"
-      VALUE "FileVersion",     OCC_VERSION_STRING_EXT "\000"
-      VALUE "LegalCopyright",  "\251 OPEN CASCADE SAS\000"
-      VALUE "ProductName",     "Open CASCADE Technology\000"
-      VALUE "ProductVersion",  OCC_VERSION_STRING_EXT "\000"
-      VALUE "OfficialSite",    "www.opencascade.com\000"
-    END
-  END
-  BLOCK "VarFileInfo"
-  BEGIN
-    VALUE "Translation", 0x0409, 0x04E4
-  END
-END

adm/templates/vcproj.user.vc9x

@@ -1,41 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="9.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Environment="PATH=..\..\..\win32\vc9\bin;$(CSF_OPT_BIN32);$(PATH)"
-				EnvironmentMerge="true"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|x64"
-			>
-			<DebugSettings
-				Environment="PATH=..\..\..\win64\vc9\bin;$(CSF_OPT_BIN64);$(PATH)"
-				EnvironmentMerge="true"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Environment="PATH=..\..\..\win32\vc9\bind;$(CSF_OPT_BIN32D);$(PATH)"
-				EnvironmentMerge="true"
-			/>
-		</Configuration>
-		<Configuration
-			Name="Debug|x64"
-			>
-			<DebugSettings
-				Environment="PATH=..\..\..\win64\vc9\bind;$(CSF_OPT_BIN64D);$(PATH)"
-				EnvironmentMerge="true"
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

adm/templates/vcxproj.user.vc10x

@@ -1,23 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
-    <LocalDebuggerEnvironment>PATH=..\..\..\win32\__VCVER__\bind;$(CSF_OPT_BIN32D);$(PATH)</LocalDebuggerEnvironment>
-    <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
-    <LocalDebuggerWorkingDirectory>$(ProjectDir)\..\..\..\..</LocalDebuggerWorkingDirectory>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
-    <LocalDebuggerEnvironment>PATH=..\..\..\win32\__VCVER__\bin;$(CSF_OPT_BIN32);$(PATH)</LocalDebuggerEnvironment>
-    <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
-    <LocalDebuggerWorkingDirectory>$(ProjectDir)\..\..\..\..</LocalDebuggerWorkingDirectory>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
-    <LocalDebuggerEnvironment>PATH=..\..\..\win64\__VCVER__\bin;$(CSF_OPT_BIN64);$(PATH)</LocalDebuggerEnvironment>
-    <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
-    <LocalDebuggerWorkingDirectory>$(ProjectDir)\..\..\..\..</LocalDebuggerWorkingDirectory>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
-    <LocalDebuggerEnvironment>PATH=..\..\..\win64\__VCVER__\bind;$(CSF_OPT_BIN64D);$(PATH)</LocalDebuggerEnvironment>
-    <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
-    <LocalDebuggerWorkingDirectory>$(ProjectDir)\..\..\..\..</LocalDebuggerWorkingDirectory>
-  </PropertyGroup>
-</Project>

adm/templates/xcode.sh

@@ -1,8 +0,0 @@
-#!/bin/bash
-# This file has been generated by genproj.tcl script from CASROOT/adm/templates/xcode.sh
-
-export TARGET="xcd"
-
-source ./env.sh "$1" "$TARGET"
-
-open -a Xcode ./adm/mac/xcd/__SOLUTION__.xcworkspace

adm/upgrade_sample_orig.dat

@@ -1,67 +0,0 @@
-// This is sample C++ file intended for testing and verifyig automatic upgrade 
-// script. Copy it with extension .cxx and apply upgrade procedure to see
-// the result, as follows:
-// > upgrade.bat -src=./adm -inc=./src -recurse -all
-
-// Include of Geom_Line.hxx and Geom_Plane.hxx should be added below
-#include <gp.hxx>
-
-//========================================================================
-// OCCT 7.0
-//========================================================================
-
-//------------------------------------------------------------------------
-// Option -rtti
-//------------------------------------------------------------------------
-
-// Should be replaced by <Standard_Type.hxx>
-#include <Standard_DefineHandle.hxx>
-
-class A_0
-{
-}
-
-class B_1 : 
-public A_0
-{
-  // second argument "A_0" should be added
-  DEFINE_STANDARD_RTTI(B_1)
-};
-
-class C_2 : public Standard_Transient, B_1
-{
-  // second argument "Standard_Transient" should be added
-  DEFINE_STANDARD_RTTI(C_2)
-};
-
-void for_rtti ()
-{
-  Handle(Geom_Curve) aCurve = new Geom_Line (gp::Origin(), gp::DZ());
-  Handle(Geom_Line) aLine = Handle(Geom_Line)::DownCast (aCurve);
-}
-
-// should be removed
-IMPLEMENT_DOWNCAST(A)
-IMPLEMENT_STANDARD_RTTIEXT(A, B)
-
-//------------------------------------------------------------------------
-// Option -fwd
-//------------------------------------------------------------------------
-
-// force safe mode used for Qt objects
-Q_OBJECT
-slots:
-
-// these includes should be recognized as corresponding to forward declarations 
-#include <occt/TColStd_HArray1OfReal.hxx>
-
-// these declarations should be just removed
-class Handle(TColStd_HArray1OfReal);
-
-// should be replaced by include of corresponding header
-class TColStd_Array1OfReal;
-class Handle(Geom_Curve);
-
-// check that trailing spaces at the following line are preserved
-void ff();       
-

dox/CMakeLists.txt

@@ -43,6 +43,7 @@ configure_file ("${OCCT_OVERVIEW_RESOURCE_DIR}/occt_ug_html.doxyfile" "${OCCT_CO
 file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nPROJECT_NUMBER         = ${OCC_VERSION_STRING_EXT}")
 file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nOUTPUT_DIRECTORY       = ${OCCT_GENERATED_OVERVIEW_DIR}/.")
 file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nPROJECT_LOGO           = ${OCCT_OVERVIEW_DIR}/resources/occ_logo.png")
+file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nEXAMPLE_PATH           = ${CMAKE_SOURCE_DIR}/src")
 
 set (OCCT_ARTICLE_PARAM_INPUT     "INPUT                  =")
 set (OCCT_ARTICLE_PARAM_IMAGEPATH "IMAGE_PATH             = ${OCCT_OVERVIEW_DIR}/resources/ ")

dox/FILES_HTML.txt

@@ -18,9 +18,11 @@ samples/samples.md
 ../samples/java/jniviewer/ReadMe.md
 ../samples/ios/UIKitSample/ReadMe.md
 ../samples/webgl/ReadMe.md
+../samples/glfw/readme.md
 samples/ocaf.md
 samples/ocaf_func.md
 samples/draw_scripts.md
+samples/ais_object.md
 
 samples/novice_guide.md
 tutorial/tutorial.md
@@ -43,6 +45,7 @@ user_guides/visualization/visualization.md
 user_guides/iges/iges.md
 user_guides/step/step.md
 user_guides/xde/xde.md
+user_guides/de_wrapper/de_wrapper.md
 user_guides/ocaf/ocaf.md
 user_guides/draw_test_harness/draw_test_harness.md
 user_guides/inspector/inspector.md

dox/FILES_PDF.txt

@@ -20,6 +20,7 @@ user_guides/vis/vis.md
 user_guides/iges/iges.md
 user_guides/step/step.md
 user_guides/xde/xde.md
+user_guides/de_wrapper/de_wrapper.md
 user_guides/inspector/inspector.md
 user_guides/draw_test_harness/draw_test_harness.md
 

dox/build/build_3rdparty/building_3rdparty.md

@@ -2,60 +2,48 @@
 ==============================================
 @tableofcontents
 
-On Windows, the easiest way to install third-party libraries is to download archive with pre-built binaries from https://opencascade.com/content/3rd-party-components.
-On Linux and OS X, it is recommended to use the version installed in the system natively.
+On Windows, the easiest way to install third-party libraries is to download archive with pre-built binaries from https://dev.opencascade.org/resources/download/3rd-party-components.
+On Linux and macOS, it is recommended to use the version installed in the system natively.
 
 @section dev_guides__building_3rdparty_win_1 Windows
 
-This document presents guidelines for building third-party products used by Open CASCADE Technology (OCCT) and samples on Windows platform. It is assumed that you are already familiar with MS Visual Studio / Visual C++. 
+This section presents guidelines for building third-party products used by Open CASCADE Technology (OCCT) and samples on Windows platform.
+It is assumed that you are already familiar with MS Visual Studio / Visual C++.
 
-You need to use the same version of MS Visual Studio for building all third-party products and OCCT itself, in order to receive a consistent set of run-time binaries. 
+You need to use the same version of MS Visual Studio for building all third-party products and OCCT itself, in order to receive a consistent set of runtime binaries.
 
-The links for downloading the third-party products are available at https://opencascade.com/content/3rd-party-components.
-
-There are two types of third-party products used  by OCCT: 
-
-* Mandatory  products: 
-	* Tcl/Tk 8.5 -- 8.6;
-	* FreeType 2.4.10 -- 2.5.3.
-* Optional  products:
-	* TBB 3.x -- 4.x;
-	* FreeImage 3.14.1 -- 3.16.0;
-	* VTK 6.1.0.
-
-It is recommended to create a separate new folder on your workstation, where you will unpack the downloaded archives of the third-party  products, and where you will build these products (for example, *c:\\occ3rdparty*). 
-
-Further in this document, this folder is referred to as *3rdparty*. 
+It is recommended to create a separate new folder on your workstation, where you will unpack the downloaded archives of the third-party products, and where you will build these products (for example, `c:/occ3rdparty`).
+Further in this document, this folder is referred to as `3rdparty`.
 
 @subsection dev_guides__building_3rdparty_win_2 Tcl/Tk
 
 Tcl/Tk is required for DRAW test harness.
 
 **Installation from sources: Tcl**
-  
+
 Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
   
-1. In the *win* sub-directory, edit file *buildall.vc.bat*:
+1. In the `win` sub-directory, edit file `buildall.vc.bat`:
 
-   * Edit the line "call ... vcvars32.bat" to have correct path to the version of Visual Studio to be used for building, for instance:
+   * Edit the line `"call ... vcvars32.bat"` to have correct path to the version of Visual Studio to be used for building, for instance:
 
          call "%VS80COMNTOOLS%\vsvars32.bat"
 
      If you are building 64-bit version, set environment accordingly, e.g.:
 
          call "%VS80COMNTOOLS%\..\..\VC\vcvarsall.bat" amd64
-     
-   * Define variable *INSTALLDIR* pointing to directory where Tcl/Tk will be installed, e.g.:
+
+   * Define variable `INSTALLDIR` pointing to directory where Tcl/Tk will be installed, e.g.:
 
          set INSTALLDIR=D:\OCCT\3rdparty\tcltk-86-32
 
-   * Add option *install* to the first command line calling *nmake*:
+   * Add option `install` to the first command line calling `nmake`:
 
          nmake -nologo -f makefile.vc release htmlhelp install %1
 
-   * Remove second call to *nmake* (building statically linked executable)
+   * Remove second call to `nmake` (building statically linked executable)
 
-2. Edit file *rules.vc* replacing line 
+2. Edit file `rules.vc` replacing line
 
        SUFX	    = tsgx
 
@@ -65,21 +53,18 @@ Download the necessary archive from https://www.tcl.tk/software/tcltk/download.h
 
    This is to avoid extra prefix 't' in the library name, which is not recognized by default by OCCT build tools.
 
-
 3. By default, Tcl uses dynamic version of run-time library (MSVCRT), which must be installed on the system where Tcl will be used.
    You may wish to link Tcl library with static version of run-time to avoid this dependency.
    For that:
 
-   * Edit file *makefile.vc* replacing strings "crt = -MD" by "crt = -MT"
+   * Edit file `makefile.vc` replacing strings `"crt = -MD"` by `"crt = -MT"`
 
-   * Edit source file *tclMain.c* (located in folder *generic*) commenting out forward declaration of function *isatty()*.
+   * Edit source file `tclMain.c` (located in folder `generic`) commenting out forward declaration of function `isatty()`.
 
+4. In the command prompt, run `buildall.vc.bat`<br>
+   You might need to run this script twice to have `tclsh` executable installed; check subfolder `bin` of specified installation path to verify this.
 
-4. In the command prompt, run *buildall.vc.bat*
-
-   You might need to run this script twice to have *tclsh* executable installed; check subfolder *bin* of specified installation path to verify this.
-
-5. For convenience of use, we recommend making a copy of *tclsh* executable created in subfolder *bin* of *INSTALLDIR* and named with Tcl version number suffix, as *tclsh.exe* (with no suffix)
+5. For convenience of use, we recommend making a copy of `tclsh` executable created in subfolder `bin` of `INSTALLDIR` and named with Tcl version number suffix, as `tclsh.exe` (with no suffix)
 
        > cd D:\OCCT\3rdparty\tcltk-86-32\bin
        > cp tclsh86.exe tclsh.exe
@@ -87,339 +72,304 @@ Download the necessary archive from https://www.tcl.tk/software/tcltk/download.h
 **Installation from sources: Tk**
   
 Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
+Apply the same steps as described for building Tcl above, with the same `INSTALLDIR`.
+Note that Tk produces its own executable, called `wish`.
 
-Apply the same steps as described for building Tcl above, with the same INSTALLDIR.
-Note that Tk produces its own executable, called *wish*. 
-
-You might need to edit default value of *TCLDIR* variable defined in *buildall.vc.bat* (should be not necessary if you unpack both Tcl and Tk sources in the same folder).
+You might need to edit default value of `TCLDIR` variable defined in `buildall.vc.bat` (should be not necessary if you unpack both Tcl and Tk sources in the same folder).
 
 @subsection dev_guides__building_3rdparty_win_2_2 FreeType
 
-FreeType is required for text display in a 3D viewer. You can download its sources from https://sourceforge.net/projects/freetype/files/
+FreeType is required for text display in a 3D viewer.
+You can download its sources from https://freetype.org/
 
-### The building procedure
+1. Unpack the downloaded archive of FreeType product into the `3rdparty` folder.
+   As a result, you will get a folder named, for example, `3rdparty/freetype-2.4.10`.
+   Further in this document, this folder is referred to as `freetype`.
 
-1. Unpack the downloaded archive of FreeType product into the *3rdparty*  folder. As a result, you will get a folder named, for example, *3rdparty\\freetype-2.4.10*.  Further in this document, this folder is referred to as *freetype*. 
-   
-2. Open the solution file *freetype\\builds\\win32\\vc20xx\\freetype.sln*  in Visual Studio. Here *vc20xx* stands for your version of Visual Studio. 
+2. Open the solution file `freetype/builds/win32/vc20xx/freetype.sln` in Visual Studio.
+   Here `vc20xx` stands for your version of Visual Studio.
 
-3. Select the configuration to build: either Debug or Release. 
+3. Select the configuration to build: either `Debug` or `Release`.
 
-4. Build  the *freetype* project. 
+4. Build the `freetype` project.<br>
+   As a result, you will get a `freetype` import library (`.lib`) in the `freetype/obj/win32/vc20xx` folder.
 
-   As a result, you will get a  freetype import library (.lib) in the *freetype\\obj\\win32\\vc20xx*  folder.  
-
-
-5. If you build FreeType for a 64 bit platform, select in the main menu **Build - Configuration Manager**  and add *x64* platform to the solution configuration by copying the settings from Win32 platform: 
+5. If you build FreeType for a 64 bit platform, select in the main menu `Build - Configuration Manager`
+   and add `x64` platform to the solution configuration by copying the settings from `Win32` platform:
 
    @figure{/build/build_3rdparty/images/3rdparty_image001.png}
 
-   Update the value of the Output File for  x64 configuration: 
+   Update the value of the Output File for `x64` configuration:
 
    @figure{/build/build_3rdparty/images/3rdparty_image003.png}
 
-   Build the *freetype* project. 
+   Build the `freetype` project.<br>
+   As a result, you will obtain a 64 bit import library (`.lib`) file in the `freetype/x64/vc20xx` folder.
+   To build FreeType as a dynamic library (`.dll`) follow steps 6, 7 and 8 of this procedure.
 
-   As a result, you will obtain a 64 bit import library (.lib) file in the *freetype\\x64\\vc20xx*  folder. 
+6. Open menu Project-> Properties-> Configuration  Properties-> General and change option `Configuration Type` to `Dynamic Library (.dll)`.
+7. Edit file `freetype/include/freetype/config/ftoption.h`:<br>
+   in line 255, uncomment the definition of macro `FT_EXPORT` and change it as follows:
 
-   To build FreeType as a dynamic library (.dll) follow steps 6, 7 and 8 of this procedure. 
+       #define FT_EXPORT(x)   __declspec(dllexport) x
 
-6. Open menu Project-> Properties-> Configuration  Properties-> General and change option **Configuration Type** to *Dynamic  Library (.dll)*. 
-7. Edit file *freetype\\include\\freetype\\config\\ftoption.h*:  
-  
-   in line 255, uncomment the definition of macro *FT_EXPORT* and change it as follows: 
+8. Build the `freetype` project.<br>
+   As a result, you will obtain the files of the import library (`.lib`) and the dynamic library (`.dll`) in folders `freetype/objs/release` or `freetype/objs/debug`.
+   If you build for a 64 bit platform, follow step 5 of the procedure.
 
-       #define FT_EXPORT(x)   __declspec(dllexport) x 
-
-8. Build  the *freetype* project. 
-
-   As a result, you will obtain the files of the import  library (.lib) and the dynamic library (.dll)   in folders <i>freetype  \\objs\\release</i> or <i>\\objs\\debug </i>. 
-   
-   If you build for a 64 bit platform, follow step 5 of the procedure. 
-
-   To facilitate the use of FreeType libraries in OCCT with minimal adjustment of build procedures, it is recommended to copy the include files and libraries of FreeType into a separate folder, named according to the pattern: *freetype-compiler-bitness-building mode*, where: 
-   * **compiler** is *vc8* or *vc9* or *vc10* or *vc11*; 
-   * **bitness**  is *32* or *64*;
-   * **building mode** is *opt* (for Release) or *deb* (for Debug). 
-    
-   The *include* subfolder should be copied as is, while libraries should be renamed to *freetype.lib* and *freetype.dll* (suffixes removed) and placed to subdirectories *lib *and  *bin*, respectively. If the Debug configuration is built, the Debug libraries should be put into subdirectories *libd* and *bind*. 
+   To facilitate the use of FreeType libraries in OCCT with minimal adjustment of build procedures,
+   it is recommended to copy the include files and libraries of FreeType into a separate folder, named according to the pattern `freetype-compiler-bitness-building mode`, where:
+   * `compiler` is `vc8` or `vc9` or `vc10` or `vc11`;
+   * `bitness`  is `32` or `64`;
+   * `building mode` is `opt` (for `Release`) or `deb` (for `Debug`).
 
+   The `include` subfolder should be copied as is, while libraries should be renamed to `freetype.lib` and `freetype.dll` (suffixes removed) and placed to subdirectories `lib` and `bin`, respectively.
+   If the `Debug` configuration is built, the Debug libraries should be put into subdirectories `libd` and `bind`.
 
 @subsection dev_guides__building_3rdparty_win_3_1 TBB
 
-This third-party product is installed with binaries 
-from the archive that can be downloaded from https://github.com/intel/tbb.
-Go to the **Download** page, find the  release version you need  (e.g. *tbb30_018oss*) and pick the archive for Windows  platform. 
+This third-party product is installed with binaries from the archive that can be downloaded from https://github.com/oneapi-src/oneTBB/releases/tag/v2021.5.0.
+Go to the **Download** page, find the release version you need (e.g. `oneTBB 2021.5.0`) and pick the archive for Windows platform.
+To install, unpack the downloaded archive of TBB product (`oneapi-tbb-2021.5.0-win.zip`)
 
-Unpack the downloaded  archive of TBB product into the *3rdparty* folder. 
+Unpack the downloaded archive of TBB product into the `3rdparty` folder.
 
-Further in this document,  this folder is referred to as *tbb*. 
+Further in this document, this folder is referred to as `tbb`.
 
 @subsection dev_guides__building_3rdparty_win_3_3 FreeImage
 
-This third-party product should be built as a dynamically loadable library (.dll file). 
-You can download its sources from 
+This third-party product should be built as a dynamically loadable library (`.dll` file).
+You can download its sources from
 https://sourceforge.net/projects/freeimage/files/Source%20Distribution/
 
-### The building procedure: 
+1. Unpack the downloaded archive of FreeImage product into `3rdparty` folder.<br>
+   As a result, you should have a folder named `3rdparty/FreeImage`.
+   Rename it according to the rule: `freeimage-platform-compiler-building mode`, where
 
-1. Unpack the  downloaded archive of FreeImage product into *3rdparty* folder. 
-  
-   As a result, you should have a folder named *3rdparty\\FreeImage*. 
-  
-   Rename it according to the rule: *freeimage-platform-compiler-building  mode*, where 
-   
-   * **platform**  is *win32* or *win64*; 
-   * **compiler**  is *vc8* or *vc9* or *vc10* or *vc11*; 
-   * **building  mode** is *opt* (for release) or *deb* (for debug) 
+   * `platform`  is `win32` or `win64`;
+   * `compiler`  is `vc8` or `vc9` or `vc10` or `vc11`;
+   * `building mode` is *opt* (for release) or `deb` (for debug)
 
-   Further in this  document, this folder is referred to as *freeimage*. 
+   Further in this document, this folder is referred to as `freeimage`.
 
-2. Open the solution file *freeimage\\FreeImage.*.sln* in your Visual Studio. 
-  
-   If you use a Visual Studio version higher than VC++ 2008, apply conversion of the workspace. 
-   Such conversion should be suggested automatically by Visual  Studio. 
-    
-3. Select a  configuration to build. 
+2. Open the solution file `freeimage/FreeImage.*.sln` in your Visual Studio.<br>
+   If you use a Visual Studio version higher than VC++ 2008, apply conversion of the workspace.
+   Such conversion should be suggested automatically by Visual Studio.
 
-   - Choose **Release**  if you are building Release binaries. 
-   - Choose **Debug** if you are building  Debug binaries. 
+3. Select a configuration to build.
+   - Choose `Release` if you are building Release binaries.
+   - Choose `Debug` if you are building Debug binaries.
 
-   *Note:* 
+   *Note:*
+
+   If you want to build a debug version of FreeImage binaries then you need to rename the following files in FreeImage projects:
 
-   If you want to  build a debug version of FreeImage binaries then you need to rename the following files in FreeImage and FreeimagePlus projects:
-   
    Project -> Properties -> Configuration Properties -> Linker -> General -> Output File
 
-       FreeImage*d*.dll  to FreeImage.dll 
-       FreeImagePlus*d*.dll to FreeImagePlus.dll 
+       FreeImage*d*.dll  to FreeImage.dll
 
    Project -> Properties -> Configuration Properties -> Linker -> Debugging-> Generate Program Database File
 
-       FreeImage*d*.pdb  to FreeImage.pdb 
-       FreeImagePlus*d*.pdb to FreeImagePlus.pdb 
+       FreeImage*d*.pdb  to FreeImage.pdb
 
    Project -> Properties -> Configuration Properties -> Linker -> Advanced-Import Library
 
-       FreeImage*d*.lib  to FreeImage.lib 
-       FreeImagePlus*d*.lib  to FreeImagePlus.lib 
+       FreeImage*d*.lib  to FreeImage.lib
 
-   Project -> Properties -> Configuration Properties -> Build Events -> Post -> Build Event -> Command Line 
+   Project -> Properties -> Configuration Properties -> Build Events -> Post -> Build Event -> Command Line
 
-       FreeImage*d*.dll     to FreeImage.dll 
-       FreeImage*d*.lib     to FreeImage.lib 
-       FreeImagePlus*d*.dll to FreeImagePlus.dll 
-       FreeImagePlus*d*.lib to FreeImagePlus.lib 
+       FreeImage*d*.dll     to FreeImage.dll
+       FreeImage*d*.lib     to FreeImage.lib
 
-   Additionally, rename in project FreeImagePlus 
-   
-   Project -> Properties -> Configuration  Properties -> Linker -> Input -> Additional Dependencies 
+   Additionally, rename in project FreeImagePlus
 
-       from FreeImage*d*.lib to FreeImage.lib 
+   Project -> Properties -> Configuration  Properties -> Linker -> Input -> Additional Dependencies
 
-4. Select a platform to build. 
+       from FreeImage*d*.lib to FreeImage.lib
 
-   - Choose *Win32* if you are building for a 32 bit platform. 
-   - Choose *x64* if you are building for a 64 bit platform. 
+4. Select a platform to build.
+   - Choose `Win32` if you are building for a 32 bit platform.
+   - Choose `x64` if you are building for a 64 bit platform.
 
-5. Start the building process. 
-
-   As a result, you should have the  library files of FreeImage product  in *freeimage\\Dist* folder (*FreeImage.dll* and *FreeImage.lib*) and in *freeimage\\Wrapper\\FreeImagePlus\\dist* folder (*FreeImagePlus.dll* and *FreeImagePlus.lib*).
+5. Start the building process.<br>
+   As a result, you should have the library files of FreeImage product in `freeimage/Dist` folder (`FreeImage.dll` and `FreeImage.lib`).
 
 @subsection dev_guides__building_3rdparty_win_3_4 VTK
 
-VTK is an open-source, freely available software system for 3D computer graphics, image processing and visualization. VTK Integration Services component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library.
+VTK Integration Services component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library.
 
-### The building procedure:
-
-1. Download the necessary archive from https://www.vtk.org/VTK/resources/software.html and unpack it into *3rdparty* folder.
-
-   As a result, you will get a folder named, for example, <i>3rdparty\VTK-6.1.0.</i>
-
-   Further in this document, this folder is referred to as *VTK*.
+1. Download the necessary archive from https://www.vtk.org/VTK/resources/software.html and unpack it into `3rdparty` folder.<br>
+   As a result, you will get a folder named, for example, `3rdparty/VTK-6.1.0`.
+   Further in this document, this folder is referred to as `VTK`.
 
 2. Use CMake to generate VS projects for building the library:
-   - Start CMake-GUI and select VTK folder as source path, and the folder of your choice for VS project and intermediate build data.
+   - Start CMake-GUI and select `VTK` folder as source path, and the folder of your choice for VS project and intermediate build data.
    - Click **Configure**.
-   - Select the VS version to be used from the ones you have installed (we recommend using VS 2010) and the architecture (32 or 64-bit).
-   - Generate VS projects with default CMake options. The open solution *VTK.sln* will be generated in the build folder.
+   - Select the VS version to be used from the ones you have installed (we recommend using VS 2015) and the architecture (32 or 64-bit).
+   - Generate VS projects with default CMake options. The open solution `VTK.sln` will be generated in the build folder.
 
 3. Build project VTK in Release mode.
 
-
 @section build_3rdparty_linux Linux
 
-This document presents additional guidelines for building third-party 
-products used by Open CASCADE Technology and samples on Linux platform. 
-
-The links for downloading the third-party products are available on the web site at 
-https://opencascade.com/content/3rd-party-components.
-
-There are two types of third-party products, which are  necessary to build OCCT: 
-  
-* Mandatory  products: 
-	* Tcl/Tk 8.5 - 8.6;  
-	* FreeType 2.4.10 - 2.5.3;
-* Optional  products: 
-	* TBB 3.x - 4.x;
-	* FreeImage 3.14.1 - 3.16.0;
-	* VTK 6.1.0.
+This section presents additional guidelines for building third-party products used by Open CASCADE Technology and samples on Linux platform.
 
 @subsection dev_guides__building_3rdparty_linux_4 Installation From Official Repositories
 
 **Debian-based distributives**
 
-All 3rd-party products required for building of OCCT could be installed
-from official repositories. You may install them from console using apt-get utility:
+All 3rd-party products required for building of OCCT could be installed from official repositories.
+You may install them from console using apt-get utility:
 
-    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libx11-dev libgl1-mesa-dev libfreeimage-dev rapidjson-dev
+    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libx11-dev libgl1-mesa-dev libfreeimage-dev
+    sudo apt-get install rapidjson-dev libdraco-dev
 
 Building is possible with C++ compliant compiler:
 
     sudo apt-get install g++
 
-@subsection dev_guides__building_3rdparty_linux_2_1 Tcl/Tk 
+@subsection dev_guides__building_3rdparty_linux_2_1 Tcl/Tk
 
-Tcl/Tk is required for DRAW test harness. 
+Tcl/Tk is required for DRAW test harness.
 
 **Installation from sources: Tcl**
-  
+
 Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
-  
-1. Enter the unix sub-directory of the directory where the Tcl source  files are located <i>(TCL_SRC_DIR)</i>. 
 
-       cd TCL_SRC_DIR/unix   
+1. Enter the `unix` sub-directory of the directory where the Tcl source files are located (`TCL_SRC_DIR`).
 
-2. Run the *configure* command:
+       cd TCL_SRC_DIR/unix
 
-       configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR   
+2. Run the `configure` command:
 
-   For a 64 bit platform also add <i>--enable-64bit</i> option to the command line. 
-  
-3. If the configure command has finished successfully, start  the building process:
-  
-       make   
+       configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR
 
-4. If building is finished successfully, start the installation of Tcl. 
-   All binary and service files of the product will be copied to the directory defined by *TCL_INSTALL_DIR* 
+   For a 64 bit platform also add `--enable-64bit` option to the command line.
 
-       make install   
+3. If the configure command has finished successfully, start the building process:
+
+       make
+
+4. If building is finished successfully, start the installation of Tcl.
+   All binary and service files of the product will be copied to the directory defined by `TCL_INSTALL_DIR`
+
+       make install
 
 **Installation from sources: Tk**
-  
+
 Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
   
-1. Enter the unix sub-directory of the directory where the Tk source files are located <i>(TK_SRC_DIR)</i> 
+1. Enter the `unix` sub-directory of the directory where the Tk source files are located (`TK_SRC_DIR`)
 
-       cd TK_SRC_DIR/unix   
+       cd TK_SRC_DIR/unix
 
-2. Run the configure command, where <i>TCL_LIB_DIR</i> is *TCL_INSTALL_DIR/lib*.
+2. Run the `configure` command, where `TCL_LIB_DIR` is `TCL_INSTALL_DIR/lib`.
 
-       configure --enable-gcc  --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR  --prefix=TK_INSTALL_DIR   
+       configure --enable-gcc  --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR  --prefix=TK_INSTALL_DIR
 
-   For a 64 bit platform also add <i>--enable-64bit</i> option to the  command line. 
+   For a 64 bit platform also add `--enable-64bit` option to the command line.
 
-3. If the configure command has finished successfully, start the building process: 
+3. If the configure command has finished successfully, start the building process:
 
-       make   
+       make
 
-4. If the building has finished successfully, start the installation of Tk. 
-   All binary and service files of the product will be copied 
-   to the directory defined by *TK_INSTALL_DIR* (usually it is *TCL_INSTALL_DIR*) 
+4. If the building has finished successfully, start the installation of Tk.
+   All binary and service files of the product will be copied
+   to the directory defined by `TK_INSTALL_DIR` (usually it is `TCL_INSTALL_DIR`)
 
-       make install   
+       make install
 
 @subsection dev_guides__building_3rdparty_linux_2_2 FreeType
 
-FreeType is required for text display in the 3D viewer. 
-Download the necessary archive from https://sourceforge.net/projects/freetype/files/ and unpack it.
-  
-1. Enter the directory where the source files of FreeType  are located <i>(FREETYPE_SRC_DIR)</i>. 
+FreeType is required for text display in the 3D viewer.
+Download the necessary archive from https://freetype.org/ and unpack it.
+
+1. Enter the directory where the source files of FreeType are located (`FREETYPE_SRC_DIR`).
 
        cd FREETYPE_SRC_DIR   
 
-2. Run the *configure* command: 
-  
-       configure  --prefix=FREETYPE_INSTALL_DIR   
+2. Run the `configure` command:
 
-   For a 64 bit platform also add <i>CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC'</i> option to the command line. 
-    
-3. If the *configure* command has finished successfully, start  the building process: 
+       configure  --prefix=FREETYPE_INSTALL_DIR
 
-       make   
+   For a 64 bit platform also add `CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC'` option to the command line.
 
-4. If the building has finished successfully, start the installation of FreeType. 
-   All binary and service files of the product will be copied to the directory defined by *FREETYPE_INSTALL_DIR* 
-    
-       make install   
+3. If the `configure` command has finished successfully, start the building process:
+
+       make
+
+4. If the building has finished successfully, start the installation of FreeType.
+   All binary and service files of the product will be copied to the directory defined by `FREETYPE_INSTALL_DIR`
+
+       make install
 
-    
 @subsection dev_guides__building_3rdparty_linux_3_1 TBB
 
-This third-party product is  installed with binaries from the archive that can be downloaded from https://github.com/intel/tbb.
-Go to the **Download** page, find the  release version you need and pick the archive for Linux platform.
-To install, unpack the downloaded archive of TBB product.
+This third-party product is installed with binaries from the archive that can be downloaded from https://github.com/oneapi-src/oneTBB/releases/tag/v2021.5.0.
+Go to the **Download** page, find the release version you need (e.g. `oneTBB 2021.5.0`) and pick the archive for Linux platform.
+To install, unpack the downloaded archive of TBB product (`oneapi-tbb-2021.5.0-lin.tgz`).
 
 @subsection dev_guides__building_3rdparty_linux_3_3 FreeImage
 
-Download the necessary archive from https://sourceforge.net/projects/freeimage/files/Source%20Distribution/
-and unpack it. The directory with unpacked sources is  further referred to as *FREEIMAGE_SRC_DIR*. 
-  
-1. Modify *FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h*: 
-   In line 60 insert the following: 
+Download the necessary archive from https://sourceforge.net/projects/freeimage/files/Source%20Distribution/ and unpack it.
+The directory with unpacked sources is  further referred to as `FREEIMAGE_SRC_DIR`.
 
-       #include string.h   
+1. Modify `FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h`:<br>
+   In line 60 insert the following:
 
-2. Enter the directory where the source files of FreeImage are located <i>(FREEIMAGE_SRC_DIR)</i>. 
-  
-       cd FREEIMAGE_SRC_DIR   
+       #include string.h
 
-3. Run the building process 
-  
-       make   
+2. Enter the directory where the source files of FreeImage are located (`FREEIMAGE_SRC_DIR`).
 
-4. Run the installation process 
+       cd FREEIMAGE_SRC_DIR
 
-   a. If you have the permission to write into directories <i>/usr/include</i> and <i>/usr/lib</i>, run the following command: 
+3. Run the building process
+
+       make
+
+4. Run the installation process
+
+   a. If you have the permission to write into directories `/usr/include` and `/usr/lib`, run the following command:
+
+          make install
+
+   b. If you do not have this permission, you need to modify file `FREEIMAGE_SRC_DIR/Makefile.gnu`:
 
-          make install   
-   b. If you do not have this permission, you need to modify file *FREEIMAGE_SRC_DIR/Makefile.gnu*: 
-  
       Change lines 7-9 from:
-  
-          DESTDIR ?= /   
-          INCDIR  ?= $(DESTDIR)/usr/include   
-          INSTALLDIR  ?= $(DESTDIR)/usr/lib   
 
-      to: 
+          DESTDIR ?= /
+          INCDIR  ?= $(DESTDIR)/usr/include
+          INSTALLDIR  ?= $(DESTDIR)/usr/lib
 
-          DESTDIR  ?= $(DESTDIR)   
-          INCDIR  ?= $(DESTDIR)/include   
-          INSTALLDIR  ?= $(DESTDIR)/lib   
-
-      Change lines 65-67 from: 
-
-          install  -m 644 -o root -g root $(HEADER) $(INCDIR)   
-          install  -m 644 -o root -g root $(STATICLIB) $(INSTALLDIR)   
-          install  -m 755 -o root -g root $(SHAREDLIB) $(INSTALLDIR)   
-  
       to:
 
-          install  -m 755 $(HEADER) $(INCDIR)   
-          install  -m 755 $(STATICLIB) $(INSTALLDIR)   
+          DESTDIR  ?= $(DESTDIR)
+          INCDIR  ?= $(DESTDIR)/include
+          INSTALLDIR  ?= $(DESTDIR)/lib
+
+      Change lines 65-67 from:
+
+          install  -m 644 -o root -g root $(HEADER) $(INCDIR)
+          install  -m 644 -o root -g root $(STATICLIB) $(INSTALLDIR)
+          install  -m 755 -o root -g root $(SHAREDLIB) $(INSTALLDIR)
+
+      to:
+
+          install  -m 755 $(HEADER) $(INCDIR)
+          install  -m 755 $(STATICLIB) $(INSTALLDIR)
           install  -m 755 $(SHAREDLIB) $(INSTALLDIR)
 
-      Change line 70 from: 
+      Change line 70 from:
 
           ldconfig
 
       to:
   
-          \#ldconfig   
-    
-   Then run the installation process by the following command: 
+          \#ldconfig
 
-        make DESTDIR=FREEIMAGE_INSTALL_DIR  install   
+   Then run the installation process by the following command:
+
+        make DESTDIR=FREEIMAGE_INSTALL_DIR  install
 
 5. Clean temporary files
 
@@ -427,201 +377,180 @@ and unpack it. The directory with unpacked sources is  further referred to as *F
 
 @subsection dev_guides__building_3rdparty_linux_3_4 VTK
 
-You can download VTK sources from https://www.vtk.org/VTK/resources/software.html
-
-### The building procedure:
-
 Download the necessary archive from https://www.vtk.org/VTK/resources/software.html and unpack it.
 
-1. Install or build *cmake* product from the source file.
-2. Start *cmake* in GUI mode with the directory where the source files of *VTK* are located:
+1. Install or build `cmake` product from the source file.
+2. Start `cmake` in GUI mode with the directory where the source files of *VTK* are located:
 
        ccmake VTK_SRC_DIR
 
-   * Press <i>[c]</i> to make the  initial configuration
-   * Define the necessary options in *VTK_INSTALL_PREFIX*
-   * Press <i>[c]</i> to make the final  configuration
-   * Press <i>[g]</i> to generate  Makefile and exit
+   * Press `[c]` to make the initial configuration
+   * Define the necessary options in `VTK_INSTALL_PREFIX`
+   * Press `[c]` to make the final configuration
+   * Press `[g]` to generate `Makefile` and exit
 
 3. Start the building of VTK:
 
        make
 
-4. Start the installation of VTK. Binaries will be installed according to the *VTK_INSTALL_PREFIX* option.
+4. Start the installation of VTK. Binaries will be installed according to the `VTK_INSTALL_PREFIX` option.
 
        make install
 
 @section build_3rdparty_macos Mac OS X
 
-This document presents additional guidelines for building third-party products 
-used by Open CASCADE Technology and samples on Mac OS X platform (10.6.4  and later). 
+This section presents additional guidelines for building third-party products
+used by Open CASCADE Technology and samples on Mac OS X platform (10.6.4 and later).
 
-The links for downloading the third-party products are available at https://opencascade.com/content/3rd-party-components.
+@subsection dev_guides__building_3rdparty_osx_2_1 Tcl/Tk
 
-There are two types of third-party products, which are  necessary to build OCCT: 
-  
-* Mandatory  products: 
-	* Tcl/Tk 8.5 - 8.6;
-	* FreeType 2.4.10 - 2.5.3.
-* Optional  products: 
-	* TBB 3.x - 4.x;
-	* FreeImage 3.14.1 - 3.16.0
-  
+Tcl/Tk is required for DRAW test harness.
 
-@subsection dev_guides__building_3rdparty_osx_2_1 Tcl/Tk 8.5 
-
-Tcl/Tk is required for DRAW test harness. Version 8.5 or  8.6 can be used with OCCT. 
-
-**Installation from sources: Tcl 8.5**
+**Installation from sources: Tcl**
 
 Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
 
-1. Enter the *macosx* sub-directory of the directory where the Tcl source files are located <i>(TCL_SRC_DIR)</i>. 
+1. Enter the `macosx` sub-directory of the directory where the Tcl source files are located (`TCL_SRC_DIR`).
 
-       cd TCL_SRC_DIR/macosx   
+       cd TCL_SRC_DIR/macosx
 
-2. Run the *configure* command 
+2. Run the `configure` command
 
-       configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR   
+       configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR
 
-   For a 64 bit platform also add <i>--enable-64bit</i> option to the command line. 
+   For a 64 bit platform also add `--enable-64bit` option to the command line.
 
-3. If the *configure* command has finished successfully, start the building process 
+3. If the `configure` command has finished successfully, start the building process
 
-       make   
-  
-4. If building is finished successfully, start the installation of Tcl. 
-   All binary and service files of the product will be copied to the directory defined by *TCL_INSTALL_DIR*. 
+       make
 
-       make install   
+4. If building is finished successfully, start the installation of Tcl.
+   All binary and service files of the product will be copied to the directory defined by `TCL_INSTALL_DIR`.
 
-**Installation from sources: Tk 8.5**
+       make install
+
+**Installation from sources: Tk**
 
 Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
 
-1. Enter the *macosx* sub-directory of the directory where the  source files of Tk are located <i>(TK_SRC_DIR)</i>. 
+1. Enter the `macosx` sub-directory of the directory where the source files of Tk are located (`TK_SRC_DIR`).
 
-       cd TK_SRC_DIR/macosx   
+       cd TK_SRC_DIR/macosx
 
-2. Run the *configure* command, where TCL_LIB_DIR is  TCL_INSTALL_DIR/lib 
+2. Run the `configure` command, where `TCL_LIB_DIR` is `TCL_INSTALL_DIR/lib`
 
-       configure --enable-gcc --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR --prefix=TK_INSTALL_DIR   
+       configure --enable-gcc --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR --prefix=TK_INSTALL_DIR
 
-	For a 64 bit platform also add <i>--enable-64bit</i> option to the  command line. 
+   For a 64 bit platform also add `--enable-64bit` option to the command line.
 
-3. If the *configure* command has finished successfully, start the building process:
+3. If the `configure` command has finished successfully, start the building process:
 
-       make   
+       make
 
-4. If the building has finished successfully, start the  installation of Tk. All binary and service files of the product will be copied to the directory defined by *TK_INSTALL_DIR* (usually it is TCL_INSTALL_DIR) 
+4. If the building has finished successfully, start the installation of Tk.
+   All binary and service files of the product will be copied to the directory defined by `TK_INSTALL_DIR` (usually it is `TCL_INSTALL_DIR`).
 
-       make install   
+       make install
 
-@subsection dev_guides__building_3rdparty_osx_2_2 FreeType 2.4.10
-  
-FreeType is required for text display in the 3D viewer. 
+@subsection dev_guides__building_3rdparty_osx_2_2 FreeType
 
-Download the necessary archive from https://sourceforge.net/projects/freetype/files/ and unpack it.
+FreeType is required for text display in the 3D viewer.
+Download the necessary archive from https://freetype.org/ and unpack it.
 
-1. Enter the directory where the source files of FreeType  are located <i>(FREETYPE_SRC_DIR)</i>. 
+1. Enter the directory where the source files of FreeType are located (`FREETYPE_SRC_DIR`).
 
-       cd FREETYPE_SRC_DIR   
+       cd FREETYPE_SRC_DIR
 
-2. Run the *configure* command 
-  
-       configure  --prefix=FREETYPE_INSTALL_DIR   
+2. Run the `configure` command
 
-   For a 64 bit platform also add <i>CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC'</i> option to the command line. 
+       configure  --prefix=FREETYPE_INSTALL_DIR
 
-3. If the *configure* command has finished successfully, start  the building process 
+   For a 64 bit platform also add `CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC'` option to the command line.
 
-       make   
+3. If the `configure` command has finished successfully, start the building process
 
-4. If building has finished successfully, start the installation of FreeType. 
-   All binary and service files of the product will be copied to the directory defined by *FREETYPE_INSTALL_DIR*.
+       make
 
-       make install   
-    
-@subsection dev_guides__building_3rdparty_osx_3_1 TBB 3.x or 4.x
+4. If building has finished successfully, start the installation of FreeType.
+   All binary and service files of the product will be copied to the directory defined by `FREETYPE_INSTALL_DIR`.
 
-This third-party product is installed with binaries from the archive 
-that can be downloaded from https://github.com/intel/tbb.
-Go to the **Download** page, find the release version you need (e.g. *tbb30_018oss*) 
-and  pick the archive for Mac OS X platform. 
-To install, unpack the downloaded archive of TBB 3.0 product (*tbb30_018oss_osx.tgz*).
+       make install
 
-@subsection dev_guides__building_3rdparty_osx_3_3 FreeImage 3.14.1 or 3.15.x
+@subsection dev_guides__building_3rdparty_osx_3_1 TBB
 
-Download the necessary archive from 
+This third-party product is installed with binaries from the archive that can be downloaded from https://github.com/oneapi-src/oneTBB/releases/tag/v2021.5.0.
+Go to the **Download** page, find the release version you need (e.g. `oneTBB 2021.5.0`) and pick the archive for Mac OS X platform.
+To install, unpack the downloaded archive of TBB product (`oneapi-tbb-2021.5.0-mac.tgz`).
+
+@subsection dev_guides__building_3rdparty_osx_3_3 FreeImage
+
+Download the necessary archive from
 https://sourceforge.net/projects/freeimage/files/Source%20Distribution/
-and unpack it. The directory with unpacked sources is  further referred to as *FREEIMAGE_SRC_DIR*.  
+and unpack it. The directory with unpacked sources is further referred to as `FREEIMAGE_SRC_DIR`.
 
-Note that for building FreeImage on Mac OS X 10.7 you should replace *Makefile.osx* 
-in *FREEIMAGE_SRC_DIR* by the corrected file, which you can find in attachment to issue #22811 in OCCT Mantis bug tracker 
-(https://tracker.dev.opencascade.org/file_download.php?file_id=6937&type=bug).
+Note that for building FreeImage on Mac OS X 10.7 you should replace `Makefile.osx`
+in `FREEIMAGE_SRC_DIR` by the corrected file, which you can find in attachment to issue [`#22811`](https://tracker.dev.opencascade.org/file_download.php?file_id=6937&type=bug) in OCCT Mantis bug tracker.
 
-1. If you build FreeImage 3.15.x you can skip this  step. 
-   Modify <i>FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h:</i> 
-  
-   In line 60 insert the following: 
+1. If you build FreeImage 3.15.x you can skip this step.
 
-       #include string.h 
+   Modify `FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h:`<br>
+   In line 60 insert the following:
 
-   Modify <i>FREEIMAGE_SRC_DIR/Source/FreeImage/PluginTARGA.cpp:</i> 
-  
-   In line 320 replace: 
+       #include string.h
 
-       SwapShort(value); 
+   Modify `FREEIMAGE_SRC_DIR/Source/FreeImage/PluginTARGA.cpp`:<br>
+   In line 320 replace:
 
-   with: 
+       SwapShort(value);
 
-       SwapShort(&value); 
+   with:
 
-2. Enter the directory where the source files of FreeImage  are located <i>(FREEIMAGE_SRC_DIR)</i>. 
+       SwapShort(&value);
 
-       cd FREEIMAGE_SRC_DIR 
+2. Enter the directory where the source files of FreeImage are located (`FREEIMAGE_SRC_DIR`).
+
+       cd FREEIMAGE_SRC_DIR
 
 3. Run the building process 
 
-       make   
+       make
 
-4. Run the installation process 
-   
-   1. If you have the permission to write into <i>/usr/local/include</i>  and <i>/usr/local/lib</i> directories, run the following command: 
+4. Run the installation process
 
-          make install   
+   1. If you have the permission to write into `/usr/local/include` and `/usr/local/lib` directories, run the following command:
 
-   2. If you do not have this permission, you need to modify file *FREEIMAGE_SRC_DIR/Makefile.osx*: 
+          make install
 
-      Change line 49 from:     
+   2. If you do not have this permission, you need to modify file `FREEIMAGE_SRC_DIR/Makefile.osx`:<br>
+      Change line 49 from:
 
           PREFIX ?= /usr/local
 
       to:
-   
-          PREFIX  ?= $(PREFIX) 
 
-      Change lines 65-69 from: 
+          PREFIX  ?= $(PREFIX)
 
-          install -d -m 755 -o  root -g wheel $(INCDIR) $(INSTALLDIR) 
-          install  -m 644 -o root -g wheel $(HEADER) $(INCDIR) 
-          install  -m 644 -o root -g wheel $(SHAREDLIB) $(STATICLIB) $(INSTALLDIR) 
-          ranlib  -sf $(INSTALLDIR)/$(STATICLIB) 
-          ln  -sf $(SHAREDLIB) $(INSTALLDIR)/$(LIBNAME) 
-    
-      to: 
+      Change lines 65-69 from:
 
-          install  -d $(INCDIR) $(INSTALLDIR) 
-          install  -m 755 $(HEADER) $(INCDIR) 
-          install  -m 755 $(STATICLIB) $(INSTALLDIR) 
-          install  -m 755 $(SHAREDLIB) $(INSTALLDIR) 
-          ln  -sf $(SHAREDLIB) $(INSTALLDIR)/$(VERLIBNAME)  
+          install -d -m 755 -o  root -g wheel $(INCDIR) $(INSTALLDIR)
+          install  -m 644 -o root -g wheel $(HEADER) $(INCDIR)
+          install  -m 644 -o root -g wheel $(SHAREDLIB) $(STATICLIB) $(INSTALLDIR)
+          ranlib  -sf $(INSTALLDIR)/$(STATICLIB)
+          ln  -sf $(SHAREDLIB) $(INSTALLDIR)/$(LIBNAME)
+
+      to:
+
+          install  -d $(INCDIR) $(INSTALLDIR)
+          install  -m 755 $(HEADER) $(INCDIR)
+          install  -m 755 $(STATICLIB) $(INSTALLDIR)
+          install  -m 755 $(SHAREDLIB) $(INSTALLDIR)
+          ln  -sf $(SHAREDLIB) $(INSTALLDIR)/$(VERLIBNAME)
           ln  -sf $(VERLIBNAME) $(INSTALLDIR)/$(LIBNAME)
 
-      Then run the installation process by the following command: 
-  
-          make PREFIX=FREEIMAGE_INSTALL_DIR  install 
-  
-5. Clean temporary files 
-  
+      Then run the installation process by the following command:
+
+          make PREFIX=FREEIMAGE_INSTALL_DIR  install
+
+5. Clean temporary files
+
        make clean

dox/build/build_occt/building_occt.md

@@ -17,7 +17,7 @@ On Linux and macOS we recommend to use libraries maintained by distributive deve
 @section build_occt_win_cmake Building with CMake tool
 
 This chapter describes the [CMake](https://cmake.org/download/)-based build process, which is now suggested as a standard way to produce the binaries of Open CASCADE Technology from sources.
-OCCT requires CMake version 2.8.12 or later.
+OCCT requires CMake version 3.1 or later.
 
 CMake is a tool that generates the actual project files for the selected target build system (e.g. Unix makefiles) or IDE (e.g. Visual Studio 2010).
 Here we describe the build procedure on the example of Windows platform with Visual Studio 2010.
@@ -113,6 +113,7 @@ The following table gives the full list of environment variables used at the con
 | BUILD_PATCH | Path | Points to the directory recognized as a "patch" for OCCT. If specified, the files from this directory take precedence over the corresponding native OCCT sources. This way you are able to introduce patches to Open CASCADE Technology not affecting the original source distribution |
 | BUILD_WITH_DEBUG | Boolean | Enables extended messages of many OCCT algorithms, usually printed to cout. These include messages on internal errors and special cases encountered, timing, etc. |
 | BUILD_ENABLE_FPE_SIGNAL_HANDLER | Boolean | Enable/Disable the floating point exceptions (FPE) during DRAW execution only. Corresponding environment variable (CSF_FPE) can be changed manually in custom.bat/sh scripts without regeneration by CMake. |
+| BUILD_CPP_STANDARD | String | Employ corresponding c++ standard (C++11, C++14, ..C++23) for building OCCT |
 | CMAKE_CONFIGURATION_TYPES | String | Semicolon-separated CMake configurations |
 | INSTALL_DIR          | Path | Points to the installation directory. *INSTALL_DIR* is a synonym of *CMAKE_INSTALL_PREFIX*. The user can specify both *INSTALL_DIR* or *CMAKE_INSTALL_PREFIX* |
 | INSTALL_DIR_BIN      | Path | Relative path to the binaries installation directory (absolute path is ${INSTALL_DIR}/${INSTALL_DIR_BIN}) |
@@ -286,124 +287,3 @@ Type "mingw32-make/make" with argument "install" to place the libraries to the i
 > mingw32-make install
 or
 > make install
-
-@section build_occt_genproj Building with Genproj tool
-
-**genproj** is a legacy tool (originated from command "wgenproj" in WOK) for generation of Visual Studio, Code::Blocks, Qt Creator (qmake), and XCode project files for building Open CASCADE Technology.
-These project files are placed inside OCCT directory (in *adm* subfolder) and use relative paths, thus can be moved together with sources.
-The project files included in official distribution of OCCT are generated by this tool.
-
-@note If you have official distribution with project files included, you can use them directly without a need to call **genproj**.
-
-**genproj** is a less flexible alternative to use of CMake build system (see @ref build_occt_win_cmake), but still has some small features useful for OCCT development.
-
-@subsection build_genproj Configuration process
-
-The environment is defined in the file *custom.sh* (on Linux and macOS) or *custom.bat* (on Windows) which can be edited directly:
-
-* `ARCH` -- architecture (32 or 64), affects only `PATH` variable for execution
-* `HAVE_*` -- flags to enable or disable use of optional third-party products
-* `CSF_OPT_*` -- paths to search for includes and binaries of all used  third-party products
-* `SHORTCUT_HEADERS` -- defines method for population of folder *inc* by header files. Supported methods are:
-  * *Copy* - headers will be copied from *src*;
-  * *ShortCut* - short-cut header files will be created, redirecting to same-named header located in *src*;
-  * *HardLink* - hard links to headers located in *src* will be created.
-* `VCVER` -- specification of format of project files, defining also version of Visual Studio to be used, and default name of the sub-folder for binaries:
-* Add paths to includes of used third-party libraries in variable `CSF_OPT_INC`.
-* Add paths to their binary libraries in variable `CSF_OPT_LIB64`.
-* For optional third-party libraries, set corresponding environment variable `HAVE_<LIBRARY_NAME>` to either *false*,  e.g. `export HAVE_FREEIMAGE=false`.
-
-| VCVER     | Visual Studio version | Windows Platform                 | Binaries folder name |
-|-----------|-----------------------|----------------------------------|----------------------|
-| vc10      | 2010 (10)             | Desktop (Windows API)            | vc10 |
-| vc11      | 2012 (11)             | Desktop (Windows API)            | vc11 |
-| vc12      | 2013 (12)             | Desktop (Windows API)            | vc12 |
-| vc14      | 2015 (14)             | Desktop (Windows API)            | vc14 |
-| vc14-uwp  | 2015 (14)             | UWP (Universal Windows Platform) | vc14-uwp |
-| vc141     | 2017 (15)             | Desktop (Windows API)            | vc14 |
-| vc141-uwp | 2017 (15)             | UWP (Universal Windows Platform) | vc14-uwp |
-| vc142     | 2019 (16)             | Desktop (Windows API)            | vc14 |
-| vc142-uwp | 2019 (16)             | UWP (Universal Windows Platform) | vc14-uwp |
-
-Alternatively, you can launch **genconf**, a GUI tool allowing to configure build options interactively.
-That tool will analyze your environment and propose you to choose available options:
-
-* Type and version of project files to generate (from the list of installed ones, detected by presence of environment variables like `VS100COMNTOOLS` on Windows platform).
-* Method to populate folder *inc* (short-cuts by default).
-* Location of third-party libraries (usually downloaded from OCCT web site, see above).
-* Path to common directory where third-party libraries are located (optional).
-* Paths to headers and binaries of the third-party libraries (found automatically basing on previous options; click button "Reset" to update).
-* Generation of PDB files within Release build ("Release with Debug info", false by default).
-
-Below are screenshots of **genconf** tool on various platforms (Windows and Linux):
-@figure{/build/build_occt/images/genconf_windows.png}
-@figure{/build/build_occt/images/genconf_linux.png}
-
-Click "Save" to store the specified configuration in *custom.bat* (Windows) or *custom.sh* (other systems) file.
-
-@subsection build_genproj_generate Projects generation
-
-Launch **genproj** to update content of *inc* folder and generate project files after changes in OCCT code affecting layout or composition of source files.
-
-@note To use **genproj** and **genconf** tools you need to have Tcl installed and accessible by `PATH`.
-If Tcl is not found, the tool may prompt you to enter the path to directory where Tcl can be found.
-
-~~~~
-  $ genproj.bat
-~~~~
-
-Note that if *custom.bat* is not present, **genproj** will start **genconf** to configure environment.
-
-@subsection build_genproj_build Building
-
-@subsubsection build_msvc_build Visual Studio
-
-Launch *msvc.bat* to start Visual Studio with all necessary environment variables defined, and build the whole solution or required toolkits.
-
-The MSVC project files are located in folders <i>adm\\msvc\\vc...</i>.
-Binaries are produced in *win32* or *win64* folders.
-
-To start DRAW, launch *draw.bat*.
-
-@subsubsection build_codeblocks_build Code::Blocks
-
-Code::Blocks is a cross-platform IDE which can be used for building OCCT on Linux, macOS and Windows platforms.
-The generated Code::Blocks project could be found within subfolder *adm/&lt;OS&gt;/cbp*.
-
-To start **Code::Blocks**, launch script *codeblocks.sh*.
-To build all toolkits, click **Build->Build workspace** in the menu bar.
-
-To start *DRAWEXE*, which has been built with **Code::Blocks** on Mac OS X, run the script
-~~~~
-   ./draw.sh cbp [d]
-~~~~
-Option *d* is used if OCCT has been built in **Debug** mode.
-
-@subsubsection build_occt_macos_xcode XCode
-
-XCode is an IDE for development on macOS platform and targeting macOS and iOS platforms.
-**genproj** tool comes with a legacy XCode project files generator, but CMake is a preferred way for building OCCT on macOS platform.
-
-To start **XCode**, launch script *xcode.sh*.
-To build a certain toolkit, select it in **Scheme** drop-down list in XCode toolbar, press **Product** in the menu and click **Build** button.
-
-To build the entire OCCT:
-* Create a new empty project (select **File -> New -> Project -> Empty project** in the menu; input the project name, e.g. *OCCT*; then click **Next** and **Create**).
-* Drag and drop the *OCCT* folder in the created *OCCT* project in the Project navigator.
-* Select **File -> New -> Target -> Aggregate** in the menu. 
-* Enter the project name (e.g. *OCCT*) and click **Finish**. The **Build Phases** tab will open.
-* Click "+" button to add the necessary toolkits to the target project. It is possible to select all toolkits by pressing **Command+A** combination.
-
-To start *DRAWEXE*, which has been built with XCode on Mac OS X, perform the following steps:
-
-1.Open Terminal application
-2.Enter `<OCCT_ROOT_DIR>`:
-~~~~
-   cd \<OCCT_ROOT_DIR\>
-~~~~
-3.Run the script
-~~~~
-   ./draw.sh xcd [d]
-~~~~
-
-Option *d* is used if OCCT has been built in **Debug** mode.

dox/contribution/coding_rules.md

@@ -725,7 +725,7 @@ Another possible problem is the order of initialization of global variables defi
 
 Avoid explicit usage of basic types (*int*, *float*, *double*, etc.), use Open CASCADE Technology types from package *Standard: Standard_Integer, Standard_Real, Standard_ShortReal, Standard_Boolean, Standard_CString* and others or a specific *typedef* instead.
 
-### Use *sizeof()* to calculate sizes [MANDATORY]
+### Use sizeof() to calculate sizes [MANDATORY]
 
 Do not assume sizes of types. Use *sizeof()* instead to calculate sizes.
 
@@ -738,7 +738,7 @@ It is recommended to follow this rule for any plain text files for consistency a
 
 The rules listed in this chapter are important for stability of the programs that use Open CASCADE Technology libraries.
 
-### Use *OSD::SetSignal()* to catch exceptions
+### Use OSD::SetSignal() to catch exceptions
 
 When using Open CASCADE Technology in an application, call *OSD::SetSignal()* function when the application is initialized.
 
@@ -787,7 +787,7 @@ See the following example:
 
 In C++ use *new* and *delete* operators instead of *malloc()* and *free()*. Try not to mix different memory allocation techniques.
 
-### Match *new* and *delete* [MANDATORY]
+### Match new and delete [MANDATORY]
 
 Use the same form of new and delete.
 
@@ -812,7 +812,7 @@ Standard_Integer aTmpVar2 = 0; // OK
 
 Uninitialized variables might be kept only within performance-sensitive code blocks and only when their initialization is guaranteed by subsequent code.
 
-### Do not hide global *new*
+### Do not hide global new
 
 Avoid hiding the global *new* operator.
 

dox/contribution/tests/tests.md

@@ -1089,10 +1089,10 @@ This group allows  testing extended data exchange packages.
 | Draw  | TKDraw, TKTopTest, TKViewerTest, TKXSDRAW, TKDCAF, TKXDEDRAW, TKTObjDRAW, TKQADraw, DRAWEXE, Problems of testing system | draw | 
 | Shape Healing | TKShHealing | heal |
 | Mesh  | TKMesh, TKXMesh | mesh |
-| Data Exchange | TKIGES  | iges |
-| Data Exchange | TKSTEPBase, TKSTEPAttr, TKSTEP209, TKSTEP | step |
-| Data Exchange | TKSTL, TKVRML   | stlvrml |
-| Data Exchange | TKXSBase, TKXCAF, TKXCAFSchema, TKXDEIGES, TKXDESTEP, TKXmlXCAF, TKBinXCAF | xde |
+| Data Exchange | TKDEIGES  | iges |
+| Data Exchange | TKDESTEP | step |
+| Data Exchange | TKDESTL, TKDEVRML   | stlvrml |
+| Data Exchange | TKXSBase, TKXCAF, TKXCAFSchema, TKXmlXCAF, TKBinXCAF | xde |
 | Foundation Classes |  TKernel, TKMath | fclasses |
 | Modeling_algorithms | TKGeomAlgo, TKTopAlgo, TKPrim, TKBO, TKBool, TKHLR, TKFillet, TKOffset, TKFeat, TKXMesh | modalg |
 | Modeling Data | TKG2d, TKG3d, TKGeomBase, TKBRep  | moddata |

dox/introduction/introduction.md

@@ -234,7 +234,7 @@ This module handles various problems of interoperability between CAD systems, ca
   * @ref occt_user_guides__step "STEP" (AP203: Mechanical Design, this covers General 3D CAD; AP214: Automotive Design; AP242).
   * @ref occt_iges_1 "IGES" (up to 5.3).
   * **glTF** 2.0 reader and writer.
-  * **OBJ** mesh file reader.
+  * **OBJ** mesh file reader and writer.
   * **VRML** converter translates Open CASCADE shapes to VRML 1.0 files (Virtual Reality Modeling Language).
   * **STL** converter translates Open CASCADE shapes to STL files.
     STL (STtereoLithography) format is widely used for rapid prototyping (3D printing).
@@ -341,7 +341,7 @@ The tables below describe the recommended software configurations for which OCCT
 
 | OS        | Compiler |
 | --------- | ----------- |
-| Windows   | Microsoft Visual Studio: 2010 SP1, 2012 Update 4, 2013 Update 5, 2015 Update 3, 2017 <sup>1</sup>, 2019 <br>, LLVM (ClangCL), GCC 4.3+ (Mingw-w64)|
+| Windows   | Microsoft Visual Studio: 2015 Update 3, 2017 <sup>1</sup>, 2019, 2022 <br>, LLVM (ClangCL), GCC 4.3+ (Mingw-w64)|
 | Linux     | GNU gcc 4.3+ <br> LLVM CLang 3.6+ |
 | OS X / macOS | XCode 6 or newer |
 | Android   | NDK r12, GNU gcc 4.9 or newer |
@@ -352,29 +352,28 @@ The tables below describe the recommended software configurations for which OCCT
 @subsection intro_req_libs Third-party libraries and tools
 
 The following third-party libraries and tools are not included in OCCT sources but are either required or can be optionally used for the indicated components of OCCT.
-They are not needed if relevant component is not needed.
+They are not needed if relevant component is not needed - it is possible building core OCCT modules without additional dependencies.
 
 Note that pre-built packages of many of the listed libraries are available at
-https://www.opencascade.com/content/3rd-party-components
+https://dev.opencascade.org/resources/download/3rd-party-components
 
-| Component | Where to find | Used for | Required or optional |
+| Component | Where to find | Used for | Purpose |
 | --------- | ------------- | -------- | -------------------- |
-| CMake 2.8+ | https://cmake.org/ | Build from sources | Optional |
-| Intel TBB 4.x or later | https://www.threadingbuildingblocks.org/ | All | Optional (advanced parallelization of algorithms) |
-| OpenGL 3.3+, OpenGL ES 2.0+ | System | Visualization | Required |
-| OpenVR 1.10+ | https://github.com/ValveSoftware/openvr | Visualization | Optional (VR support) |
-| Direct3D 9 | Windows | Visualization | Optional (integration with GUI using Direct3D) |
-| FreeType 2.4+ | https://www.freetype.org/download.html | Visualization | Optional (text rendering) |
-| FreeImage 3.17+ | https://sourceforge.net/projects/freeimage/files | Visualization | Optional (support of common 2D graphic formats) |
-| FFmpeg 3.1+ | https://www.ffmpeg.org/download.html | Visualization | Optional (video recording) |
-| VTK 6.1+ | https://www.vtk.org/download/ | Visualization | Optional (VTK integration) |
-| Flex 2.6.4+ and Bison 3.7.1+ | https://sourceforge.net/projects/winflexbison/ | Data Exchange | Optional (update of STEP and ExprIntrp parsers) |
-| RapidJSON 1.1+ | https://rapidjson.org/ | Data Exchange | Optional (reading glTF files) |
-| Draco 1.4.1+ | https://github.com/google/draco | Data Exchange | Optional (reading compressed glTF files) |
-| Tcl/Tk 8.6.3+ <br> or ActiveTcl 8.6 | https://www.tcl.tk/software/tcltk/download.html <br> https://www.activestate.com/activetcl/downloads | DRAW Test Harness | Required |
-| Qt Desktop: Qt 4.8.6+ <br> Android: Qt 5.3.2+ | https://www.qt.io/download/ | Samples and demos | Optional (Qt samples) |
-| Doxygen 1.8.5+ | https://www.doxygen.nl/download.html | Documentation | Required |
-| Graphviz 2.38+ | https://graphviz.org/ | Documentation | Optional (dependency graphs) |
+| CMake 3.1+ | https://cmake.org/ | Configuration | Build from sources |
+| Intel oneTBB 2021.5.0 | https://github.com/oneapi-src/oneTBB/releases/tag/v2021.5.0 | All | Parallelization of algorithms (alternative to built-in thread pool) |
+| OpenGL 3.3+, OpenGL ES 2.0+ | System | Visualization | Required for using 3D Viewer |
+| OpenVR 1.10+ | https://github.com/ValveSoftware/openvr | Visualization | VR (Virtual Reality) support in 3D Viewer |
+| FreeType 2.4+ | https://www.freetype.org/download.html | Visualization | Text rendering in 3D Viewer |
+| FreeImage 3.17+ | https://sourceforge.net/projects/freeimage/files | Visualization | Reading/writing image files |
+| FFmpeg 3.1+ | https://www.ffmpeg.org/download.html | Visualization | Video recording |
+| VTK 6.1+ | https://www.vtk.org/download/ | IVtk | VTK integration module |
+| Flex 2.6.4+ and Bison 3.7.1+ | https://sourceforge.net/projects/winflexbison/ | Data Exchange | Updating STEP and ExprIntrp parsers |
+| RapidJSON 1.1+ | https://rapidjson.org/ | Data Exchange | Reading glTF files |
+| Draco 1.4.1+ | https://github.com/google/draco | Data Exchange | Reading compressed glTF files |
+| Tcl/Tk 8.6.3+ | https://www.tcl.tk/software/tcltk/download.html | DRAW Test Harness | Tcl interpreter in Draw module |
+| Qt 5.3.2+ | https://www.qt.io/download/ | Inspector and Samples | Inspector Qt samples and  |
+| Doxygen 1.8.5+ | https://www.doxygen.nl/download.html | Documentation | (Re)generating documentation |
+| Graphviz 2.38+ | https://graphviz.org/ | Documentation | Generating dependency graphs |
 
 @subsection intro_req_hw Hardware
 
@@ -398,7 +397,7 @@ Don't forget to report these bugs to vendors.
 
 @section intro_install Download and Installation
 
-OCCT can be downloaded from https://www.opencascade.com/content/latest-release
+OCCT can be downloaded from https://dev.opencascade.org/release
 
 In most cases you would want to rebuild OCCT from sources on your platform (OS, compiler) before
 using it in your project, to ensure binary compatibility and appropriate configuration of the library.
@@ -432,7 +431,7 @@ The contents of the OCCT-7.4.0 directory (called further "OCCT root", or $CASROO
 
   * **adm**   This folder contains administration files, which allow rebuilding OCCT;
   * **adm/cmake**  This folder contains files of CMake building procedure;
-  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++ 2010, 2012, 2013, 2015, 2017 and 2019 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
+  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++ 2013, 2015, 2017, 2019 and 2022 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
   * **adm/scripts** This folder contains auxiliary scripts for semi-automated building and packaging of OCCT for different platforms;
   * **data**  This folder contains CAD files in different formats, which can be used to test the OCCT functionality;
   * **doc**  This folder contains OCCT documentation in HTML and PDF format;
@@ -442,7 +441,7 @@ The contents of the OCCT-7.4.0 directory (called further "OCCT root", or $CASROO
   * **src**  This folder contains OCCT source files. They are organized in folders, one per development unit;
   * **tests**  This folder contains scripts for OCCT testing.
   * **tools**  This folder contains sources of Inspector tool.
-  * **win64/vc10**  This folder contains executable and library files built in optimize mode for Windows platform by Visual C++  2010;
+  * **win64/vc14**  This folder contains executable and library files built in optimize mode for Windows platform by Visual C++ 2015;
 
 @subsection intro_install_linux Linux
 
@@ -463,7 +462,7 @@ To run any Open CASCADE Technology application you need to set the environment v
 
 You can define the environment variables with env.bat script located in the 
 $CASROOT folder. This script accepts two arguments to be used: 
-the version of Visual Studio (vc10 -- vc142) and the architecture (win32 or win64).
+the version of Visual Studio (vc12 -- vc143) and the architecture (win32 or win64).
 
 The additional environment settings necessary for compiling OCCT libraries and samples 
 by Microsoft Visual Studio can be set using script custom.bat located in the same folder. 
@@ -507,7 +506,7 @@ The scripts are located in the OCCT root folder.
   * **CSF_ShadersDirectory** (optional) defines the directory for GLSL programs for Ray Tracing renderer (embedded resources are used when variable is undefined);
   * **CSF_SHMessage** (optional) defines the path to the messages file for *ShapeHealing*;
   * **CSF_XSMessage** (optional) defines the path to the messages file for **STEP** and **IGES** translators;
-  * **CSF_StandardDefaults**, **CSF_StandardLiteDefaults*, **CSF_XCAFDefaults**, and **CSF_PluginDefaults** define paths to directory where configuration files for OCAF persistence are located (required for open/save operations with OCAF documents);
+  * **CSF_StandardDefaults**, **CSF_StandardLiteDefaults**, **CSF_XCAFDefaults**, and **CSF_PluginDefaults** define paths to directory where configuration files for OCAF persistence are located (required for open/save operations with OCAF documents);
   * **CSF_IGESDefaults** and **CSF_STEPDefaults** (optional) define paths to directory where resource files of **IGES** and **STEP** translators are located;
   * **CSF_XmlOcafResource** is required in order to set the path to **XSD** resources, which defines XML grammar.
   * **CSF_MIGRATION_TYPES** is required in order to read documents that contain old data types, such as *TDataStd_Shape*;
@@ -532,7 +531,7 @@ At minimum the following should be considered:
    the application should be provided separately in a modifiable form, with all materials needed for the user to be able to run the application with a modified version of OCCT.
 
 If you want to use Open CASCADE Technology without being bound by LGPL requirements, 
-please <a href="https://www.opencascade.com/contact">contact Open CASCADE company</a> for a commercial license.
+please <a href="https://dev.opencascade.org/webform/contact_us">contact Open CASCADE company</a> for a commercial license.
 
 Note that Open CASCADE Technology is provided on an "AS IS" basis, WITHOUT 
 WARRANTY OF ANY KIND. The entire risk related to any use of the OCCT code and 
@@ -573,8 +572,7 @@ FreeType 2 is released under two open-source licenses: BSD-like FreeType License
 It is a library that helps you to take advantage of multi-core processor performance without having to be a threading expert. 
 Threading Building Blocks is not just a threads-replacement library. It represents a higher-level, task-based parallelism that 
 abstracts platform details and threading mechanisms for scalability and performance. 
-TBB version 2017 is available under Apache 2.0 license, while older versions 
-until 4.4 are available under GPLv2 license with the runtime exception (https://www.threadingbuildingblocks.org).
+Intel oneTBB 2021.5.0 is available under Apache 2.0 license (https://www.threadingbuildingblocks.org).
 
 **OpenGL** is an industry standard API for 3D graphics used by OCCT for 
 implementation of 3D viewer. OpenGL specification is developed by the
@@ -593,10 +591,10 @@ If you need further information on VTK, refer to VTK Homepage https://www.vtk.or
 **Doxygen** developed by Dimitri van Heesch is open source documentation system for 
 C++, C, Java, Objective-C, Python, IDL, PHP and C#. This product is used in Open CASCADE Technology 
 for automatic creation of Technical Documentation from C++ header files. 
-If you need further information on Doxygen, refer to https://www.stack.nl/~dimitri/doxygen/index.html.
+If you need further information on Doxygen, refer to https://www.doxygen.nl/index.html.
 
 **Graphviz** is open source graph visualization software developed by John Ellson, Emden Gansner, Yifan Hu and Arif Bilgin. 
-Graph visualization is representiation of structured information as diagrams of abstract graphs and networks. 
+Graph visualization is representation of structured information as diagrams of abstract graphs and networks.
 This product is used together with Doxygen in Open CASCADE Technology for automatic creation of Technical Documentation 
 (generation of dependency graphs). Current versions of Graphviz are licensed on an open source 
 basis under The Eclipse Public License (EPL) (https://www.graphviz.org/license/).
@@ -631,11 +629,6 @@ CMake is used to control the software compilation process using simple platform
 OCCT uses CMake as a build system. CMake is available under BSD 3-Clause license. 
 See more at https://cmake.org/
 
-**Cotire** (compile time reducer) is a CMake module that speeds up the build process of CMake based build systems 
-by fully automating techniques as precompiled header usage and single compilation unit builds for C and C++.
-Cotire is included in OCCT repository and used optionally by OCCT CMake scripts to accelerate builds by use of precompiled headers.
-Cotire is licensed under the MIT license (https://github.com/sakra/cotire/blob/master/license).
-
 **MikTEX** is up-to-date implementation of TeX/LaTeX and related programs for Windows. It is used 
 for generation of User and Developer Guides in PDF format. See https://miktex.org for information
 on this tool.

dox/samples/ais_object.md

@@ -0,0 +1,911 @@
+AIS: Custom Presentation {#tutorials__ais_object}
+========
+
+@tableofcontents
+
+@section intro Getting Started
+
+OCCT provides a strong set of built-in Interactive Objects for rapid application development,
+but the real power and flexibility of **Application Interactive Services** (@c AIS) could be revealed by subclassing and implementing custom presentations.
+In this tutorial we will focus on the development of a custom @c AIS_InteractiveObject and show the basics step by step.
+
+Let's start from the very beginning and try subclassing @c AIS_InteractiveObject object:
+
+~~~~{.cpp}
+class MyAisObject : public AIS_InteractiveObject
+{
+  DEFINE_STANDARD_RTTI_INLINE(MyAisObject, AIS_InteractiveObject)
+public:
+  MyAisObject() {}
+public:
+  virtual void Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                        const Handle(Prs3d_Presentation)& thePrs,
+                        const Standard_Integer theMode) override {}
+
+  virtual void ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                 const Standard_Integer theMode) override {}
+
+  virtual bool AcceptDisplayMode (const Standard_Integer theMode) const override
+  { return true; }
+};
+~~~~
+
+@c DEFINE_STANDARD_RTTI_INLINE() macro will register the new class within the OCCT Run-Time Type Information (RTTI) system.
+This step is optional (you may skip it if you are not going to use methods like @c Standard_Transient::DynamicType() in application code), but it is a common practice while subclassing OCCT classes.
+
+The @c AIS_InteractiveObject interface defines only a couple of pure virtual methods - @c @::Compute() defining an object presentation and @c @::ComputeSelection() defining a selectable (pickable) volume.
+Selection and presentation are two independent mechanisms in **AIS**. Presentation rendering is done with help of OpenGL or a similar low-level graphics library, while selection doesn't depend on a graphic driver at all.
+Providing an empty implementation of these two methods would be enough for adding the object to @c AIS_InteractiveContext (@c @::Display()), but obviously nothing will appear on the screen.
+
+@section prs_builders Presentation builders
+
+To go ahead, we need to define some presentation of our object.
+OCCT provides a set of presentation building tools for common elements like arrows, shapes, boxes, etc.
+These tools could be found within @c Prs3d, @c StdPrs and @c DsgPrs packages:
+
+- **Prs3d**
+  provides builders for simple geometric elements.
+  - @c Prs3d_Arrow, @c Prs3d_BndBox, @c Prs3d_Point, @c Prs3d_Text, @c Prs3d_ToolCylinder, @c Prs3d_ToolDisk, @c Prs3d_ToolSector, @c Prs3d_ToolSphere, @c Prs3d_ToolTorus
+- **StdPrs**
+  provides builders for analytical geometry and B-Rep shapes (@c TopoDS_Shape).
+  - @c StdPrs_WFShape, @c StdPrs_ShadedShape, @c StdPrs_BRepTextBuilder
+- **DsgPrs**
+  provides builders for datums, dimensions and relations.
+
+Presentation builders are reusable bricks for constructing @c AIS objects.
+Standard OCCT interactive objects highly rely on them, so that you may easily replicate @c AIS_Shape presentation for displaying a shape with just a couple of lines calling @c StdPrs_ShadedShape:
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (100.0, 100.0);
+  StdPrs_ShadedShape::Add (thePrs, aShape, myDrawer);
+}
+...
+Handle(AIS_InteractiveContext) theCtx;
+Handle(MyAisObject) aPrs = new MyAisObject();
+theCtx->Display (aPrs, true);
+~~~~
+
+@figure{ais_object_step1_shaded.png,"@c StdPrs_ShadedShape presentation builder.",409} height=409px
+
+@c PrsMgr_PresentableObject::Compute() method takes three arguments:
+- **Presentation Manager** (@c PrsMgr_PresentationManager).
+  Rarely used parameter, but might be necessary for some advanced use cases.
+- **Presentation** (@c Prs3d_Presentation or @c Graphic3d_Structure).
+  Defines the structure to fill in with presentation elements.
+- **Display Mode** (integer number).
+  Specifies the display mode to compute.
+  **0** is a default display mode, if not overridden by @c AIS_InteractiveObject::SetDisplayMode() or by @c AIS_InteractiveContext::Display().
+
+For each supported display mode, the **Presentation Manager** creates a dedicated @c Prs3d_Presentation and stores it within the object itself as a list of presentations @c PrsMgr_PresentableObject::Presentations().
+It is a good practice to reject unsupported display modes within @c @::Compute() method:
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  if (theMode != 0) { return; } // reject non-zero display modes
+
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (100.0, 100.0);
+  StdPrs_ShadedShape::Add (thePrs, aShape, myDrawer);
+}
+~~~~
+
+This wouldn't, however, prevent application from displaying the object with another display mode like this:
+
+~~~~{.cpp}
+Handle(AIS_InteractiveContext) theCtx;
+Handle(MyAisObject) aPrs = new MyAisObject();
+theCtx->Display (aPrs, 100, -1, true);
+~~~~
+
+The code above will display @c MyAisObject with display mode equal to 100, and after @c @::Compute() modifications nothing will be displayed on the screen.
+@c AIS will still create a presentation with specified display mode, but it will be empty - method @c @::AcceptDisplayMode() could be overridden to disallow even creation of an empty presentation:
+
+~~~~{.cpp}
+bool MyAisObject::AcceptDisplayMode (const Standard_Integer theMode) const
+{
+  return theMode == 0; // reject non-zero display modes
+}
+~~~~
+
+@c AIS_InteractiveContext::Display() checks if requested display mode is actually supported by the object, and uses default display mode (_**0**_) if it is not.
+@c StdPrs_ShadedShape prepares a shaded (triangulated) presentation of a shape, while @c StdPrs_WFShape creates a wireframe presentation with B-Rep wire boundaries:
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  if (!AcceptDisplayMode (theMode)) { return; }
+
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (100.0, 100.0);
+  StdPrs_ShadedShape::Add (thePrs, aShape, myDrawer); // add shading
+  StdPrs_WFShape::Add     (thePrs, aShape, myDrawer); // add wireframe
+}
+~~~~
+
+@figure{ais_object_step1_shaded_wf.png,"Result of @c StdPrs_ShadedShape + @c StdPrs_WFShape presentation builders.",409} height=409px
+
+Presentation builders take the @c Prs3d_Drawer object defining various attributes - material of shaded shape, number of isolines in wireframe mode, tessellation quality, line colors and many others.
+@c PrsMgr_PresentableObject defines @c myDrawer property with default attributes.
+@c StdPrs makes it easy to display topological shapes.
+With the help of @c Prs3d tools we may display elements like arrows, boxes or text labels.
+Let's extend our presentation with a second **display mode 1** showing a bounding box using @c Prs3d_BndBox builder:
+
+~~~~{.cpp}
+bool MyAisObject::AcceptDisplayMode (const Standard_Integer theMode) const
+{
+  return theMode == 0 || theMode == 1;
+}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (100.0, 100.0);
+  if (theMode == 0)
+  {
+    StdPrs_ShadedShape::Add (thePrs, aShape, myDrawer);
+    StdPrs_WFShape::Add (thePrs, aShape, myDrawer); // add wireframe
+  }
+  else if (theMode == 1)
+  {
+    Bnd_Box aBox;
+    BRepBndLib::Add (aShape, aBox);
+    Prs3d_BndBox::Add (thePrs, aBox, myDrawer);
+  }
+}
+~~~~
+
+Now, displaying an object with **display mode 1** will show a box:
+
+~~~~{.cpp}
+Handle(AIS_InteractiveContext) theCtx;
+Handle(MyAisObject) aPrs = new MyAisObject();
+theCtx->Display (aPrs, 1, 0, true);
+~~~~
+
+@figure{ais_object_step1_bndbox.png,"@c Prs3d_BndBox presentation builder.",409} height=409px
+
+@c AIS disallows activating multiple display modes at the same time, so that these presentation modes should be alternatives to each other.
+But @c AIS may use non-active display mode for highlighting purposes - like wireframe (@c AIS_Wireframe) presentation displayed on top of shaded (@c AIS_Shaded) presentation for selected @c AIS_Shape objects.
+
+Let's define a dedicated enumeration for display modes supported by our interactive object and setup the 1st (@c MyDispMode_Highlight) display mode for highlighting with help of @c PrsMgr_PresentableObject::SetHilightMode():
+
+~~~~{.cpp}
+class MyAisObject : public AIS_InteractiveObject
+{
+public:
+  enum MyDispMode { MyDispMode_Main = 0, MyDispMode_Highlight = 1 };
+
+...
+
+MyAisObject::MyAisObject()
+{
+  SetDisplayMode (MyDispMode_Main);      // main (active) display mode
+  SetHilightMode (MyDispMode_Highlight); // auxiliary (highlighting) mode
+}
+
+...
+
+Handle(AIS_InteractiveContext) theCtx;
+Handle(MyAisObject) aPrs = new MyAisObject();
+theCtx->Display (aPrs, MyAisObject::MyDispMode_Main, 0, false);
+theCtx->HilightWithColor (aPrs, aPrs->HilightAttributes(), false);
+theCtx->CurrentViewer()->Redraw();
+~~~~
+
+@figure{ais_object_step1_highlight.png,"Highlighting by color (left) and highlighting by another display mode (right).",818} height=409px
+
+In this particular use case we've used the method @c AIS_InteractiveContext::HilightWithColor() instead of @c @::SetSelected() - just because our object is not selectable yet and @c @::SetSelected() wouldn't work.
+Highlighted presentation appears on the screen with modulated color (see left screenshot above).
+Using a dedicated display mode for highlighting (right screenshot above) allows customizing presentation in selected / highlighted states.
+
+@section prim_arrays Primitive arrays
+
+@c Prs3d_Presentation might be filled in by the following **primitives**:
+- **Triangles**
+  - @c Graphic3d_ArrayOfTriangles
+  - @c Graphic3d_ArrayOfTriangleFans
+  - @c Graphic3d_ArrayOfTriangleStrips
+- **Lines**
+  - @c Graphic3d_ArrayOfSegments
+  - @c Graphic3d_ArrayOfPolylines
+- **Points** or **Markers**
+  - @c Graphic3d_ArrayOfPoints
+
+This triplet of primitives is what graphics hardware is capable of rendering, so that it could be transferred directly to low-level graphics libraries in the form of *Vertex Buffer Objects* (VBO).
+Each **primitive array** consists of an array of vertex attributes (_**position**, **normal**, **texture coordinates**, **vertex colors**_, etc.) and optional **array of indices**.
+The latter one avoids duplicating vertices shared between connected elements (triangles, polylines) in attributes array.
+
+@c Graphic3d_ArrayOfPrimitives and it's subclasses provide a convenient interface for filling in primitive arrays:
+- Constructor takes a number of vertices, number of edges (indices) and a bitmask of optional vertex attributes.
+- @c Graphic3d_ArrayOfPrimitives::AddVertex() appends a vertex with specified attributes to the end of the array (within the range specified at construction time).
+- @c Graphic3d_ArrayOfPrimitives::AddEdges() appends indices, starting with 1.
+  Each line segment is defined by two consequential edges, each triangle is defined by three consequential edges.
+
+Let's extend our sample and display a cylinder section contour defined by array of indexed segments (e.g. a polyline of four vertices):
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (aRadius, aHeight);
+  if (theMode == MyDispMode_Main)
+  {
+    StdPrs_ShadedShape::Add (thePrs, aShape, myDrawer);
+    //StdPrs_WFShape::Add (thePrs, aShape, myDrawer);
+    Handle(Graphic3d_ArrayOfSegments) aSegs = new Graphic3d_ArrayOfSegments (4, 4 * 2, Graphic3d_ArrayFlags_None);
+    aSegs->AddVertex (gp_Pnt (0.0, -aRadius, 0.0));
+    aSegs->AddVertex (gp_Pnt (0.0, -aRadius, aHeight));
+    aSegs->AddVertex (gp_Pnt (0.0,  aRadius, aHeight));
+    aSegs->AddVertex (gp_Pnt (0.0,  aRadius, 0.0));
+    aSegs->AddEdges (1, 2);
+    aSegs->AddEdges (2, 3);
+    aSegs->AddEdges (3, 4);
+    aSegs->AddEdges (4, 1);
+    Handle(Graphic3d_Group) aGroupSegs = thePrs->NewGroup();
+    aGroupSegs->SetGroupPrimitivesAspect (myDrawer->WireAspect()->Aspect());
+    aGroupSegs->AddPrimitiveArray (aSegs);
+  }
+  else if (theMode == MyDispMode_Highlight) { ... }
+}
+~~~~
+
+@figure{ais_object_step2_segments.png,"Displaying @c Graphic3d_ArrayOfSegments.",409} height=409px
+
+The process is quite straightforward:
+- Create a new @c Graphic3d_Group using @c Prs3d_Presentation::NewGroup();
+- Specify presentation aspects using @c Graphic3d_Group::SetGroupPrimitivesAspect();
+- Create and add an array of primitives using @c Graphic3d_Group::AddPrimitiveArray().
+
+Standard presentation builders like @c StdPrs_ShadedShape / @c StdPrs_WFShape internally do exactly the same thing - a tessellated representation of a shape is added to presentation in form of triangles (shaded),
+line segments (wireframe and free edges) and markers (free shape vertices).
+
+A single @c Graphic3d_Group normally defines just a single primitive array, but it is technically possible adding more arrays to the same group @c Graphic3d_Group::AddPrimitiveArray()
+and with different aspects @c Graphic3d_Group::SetPrimitivesAspect(), which might be considered in advanced scenarios.
+
+Method @c Graphic3d_Group::AddText() allows adding text labels to a presentation.
+Internally, text labels are rendered as an array of textured triangles using texture atlas created from a font, but this complex logic is hidden from the user.
+
+@section prim_aspects Primitive aspects
+
+@c Graphic3d_Aspects is a class defining **display properties** of a primitive array (@c Graphic3d_Group::SetGroupPrimitivesAspect()) -
+_**material**, **shading model**, **color**, **texture maps**, **blending mode**, **line width**_ and others.
+
+There are also subclasses @c Graphic3d_AspectFillArea3d (triangles), @c Graphic3d_AspectLine3d (lines), @c Graphic3d_AspectMarker3d (markers)
+and @c Graphic3d_AspectText3d (text labels) defined as specializations for a specific primitive array type.
+These subclasses exist for historical reasons and are treated by renderers in exactly the same way.
+
+It is technically possible to create transient aspects directly within @c @::Compute() method like this:
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  Handle(Graphic3d_Aspects) anAspects = new Graphic3d_Aspects();
+  anAspects->SetShadingModel (Graphic3d_TypeOfShadingModel_Unlit);
+  anAspects->SetColor (Quantity_NOC_RED);
+  Handle(Graphic3d_Group) aGroup = thePrs->NewGroup();
+  aGroup->SetGroupPrimitivesAspect (anAspects);
+  ...
+}
+~~~~
+
+While this code would work as expected, but prevents further dynamic updates of presentation aspects without recomputing entire presentation.
+Instead, it is preferred taking attributes from @c PrsMgr_PresentableObject::myDrawer / @c @::Attributes() or storing custom attributes as class fields.
+@c Prs3d_Drawer defines a set of attributes used by @c AIS presentation builders, but the same parameters might be used by a custom builder as well.
+
+It is also preferred preallocating attributes in the class constructor.
+This would allow changing attributes without recomputing the entire presentation - just by calling @c PrsMgr_PresentableObject::SynchronizeAspects() after modifications.
+Our custom object uses @c myDrawer->ShadingAspect() and @c myDrawer->WireAspect() aspects, so let's initialize them explicitly - assign silver material for shading and green color to line segments:
+
+~~~~{.cpp}
+MyAisObject::MyAisObject()
+{
+  SetHilightMode (MyDispMode_Highlight);
+  myDrawer->SetupOwnShadingAspect();
+  myDrawer->ShadingAspect()->SetMaterial (Graphic3d_NameOfMaterial_Silver);
+  myDrawer->SetWireAspect (new Prs3d_LineAspect (Quantity_NOC_GREEN, Aspect_TOL_SOLID, 2.0));
+}
+~~~~
+
+@section quadric_builders Quadric builders
+
+Previously, we've used @c StdPrs_ShadedShape for displaying cylinder geometry.
+The @c Prs3d package provides a simpler way for displaying geometry like cylinders, spheres and toruses - based on the @c Prs3d_ToolQuadric interface.
+This interface allows bypassing creation of a complex B-Rep (@c TopoDS_Shape) definition of a simple geometry, and to avoid using general-purpose tessellators like @c BRepMesh.
+
+> This difference could be negligible for a small number of such objects, but might become considerable for larger amounts.
+> The B-Rep definition of a valid cylinder includes 2 unique @c TopoDS_Vertex, 3 @c TopoDS_Edge, 3 @c TopoDS_Wire, 3 @c TopoDS_Face, 1 @c TopoDS_Shell and 1 @c TopoDS_Solid.
+> Internally each @c TopoDS_Edge also defines curves (@c Geom_Curve as well as 2D parametric @c Geom2d_Curve) and each @c TopoDS_Face defines analytical surface (@c Geom_Surface).
+> Meshing such geometry with the help of @c BRepMesh is much more complicated than one may think.
+> A plenty of data structures (memory!) and computations (time!) for displaying a geometry that could be triangulated by a simple for loop.
+
+@c Prs3d_ToolQuadric solves this problem by creating a triangulation for such kinds of shapes in a straight-forward way.
+Let's try using @c Prs3d_ToolCylinder in our sample:
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (aRadius, aHeight);
+  if (theMode == MyDispMode_Main)
+  {
+	//StdPrs_ShadedShape::Add (thePrs, aShape, myDrawer); // add shading
+	//StdPrs_WFShape::Add (thePrs, aShape, myDrawer); // add wireframe
+	Handle(Graphic3d_ArrayOfTriangles) aTris =
+     Prs3d_ToolCylinder::Create (aRadius, aRadius, aHeight, 10, 10, gp_Trsf());
+	Handle(Graphic3d_Group) aGroupTris = thePrs->NewGroup();
+	aGroupTris->SetGroupPrimitivesAspect (myDrawer->ShadingAspect()->Aspect());
+	aGroupTris->AddPrimitiveArray (aTris);
+	...
+  }
+  ...
+}
+~~~~
+
+@figure{ais_object_step3_quadrics_10.png,"@c Prs3d_ToolCylinder (10 slices).",409} height=409px
+
+Well... that looks a little bit edgy.
+Quadric builder creates a triangulation taking the following parameters:
+- Geometry parameters.
+  (in case of a cylinder - base radius, top radius and height).
+- Number of subdivisions along U (slices) and V (stacks) parameters.
+  In some cases only one parametric scope matters.
+- Transformation @c gp_Trsf to apply
+  (original geometry is defined within some reference coordinate system).
+
+Let's increase number of subdivisions from _10_ to _25_:
+~~~~{.cpp}
+Handle(Graphic3d_ArrayOfTriangles) aTris =
+  Prs3d_ToolCylinder::Create (aRadius, aRadius, aHeight, 25, 25, gp_Trsf());
+~~~~
+
+@figure{ais_object_step3_quadrics_25.png,"@c Prs3d_ToolCylinder (25 slices).",409} height=409px
+
+It looks much better now! Note that @c Prs3d_ToolCylinder could be used for building both cones and cylinders depending on top/bottom radius definition.
+
+There is one issue though - our cylinder doesn't have top and bottom anymore!
+To fix this problem we will use one more quadric builder @c Prs3d_ToolDisk:
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  if (theMode == MyDispMode_Main)
+  {
+    Prs3d_ToolCylinder aCyl (aRadius, aRadius, aHeight, 25, 25);
+    Prs3d_ToolDisk aDisk (0.0, aRadius, 25, 1);
+
+    Handle(Graphic3d_ArrayOfTriangles) aTris =
+      new Graphic3d_ArrayOfTriangles (aCyl.VerticesNb() + 2 * aDisk.VerticesNb(),
+                                      3 * (aCyl.TrianglesNb() + 2 * aDisk.TrianglesNb()),
+                                      Graphic3d_ArrayFlags_VertexNormal);
+    aCyl .FillArray (aTris, gp_Trsf());
+    aDisk.FillArray (aTris, gp_Trsf());
+
+    gp_Trsf aDisk2Trsf;
+    aDisk2Trsf.SetTransformation (gp_Ax3 (gp_Pnt (0.0, 0.0, aHeight), -gp::DZ(), gp::DX()), gp::XOY());
+    aDisk.FillArray (aTris, aDisk2Trsf);
+
+    Handle(Graphic3d_Group) aGroupTris = thePrs->NewGroup();
+    aGroupTris->SetGroupPrimitivesAspect (myDrawer->ShadingAspect()->Aspect());
+    aGroupTris->AddPrimitiveArray (aTris);
+    aGroupTris->SetClosed (true);
+    ...
+  }
+}
+~~~~
+
+Now our cylinder looks solid! The sample above merges two triangulations into a single one instead of appending each primitive array individually.
+
+This looks like a minor difference, but it might have a _dramatic impact on performance_ in case of a large scene,
+as each `Graphic3d_ArrayOfPrimitives` is mapped into a dedicated draw call at graphic driver (OpenGL) level.
+
+@figure{ais_object_step3_quadrics_fin.png,"@c Prs3d_ToolCylinder + @c Prs3d_ToolDisk.",409} height=409px
+
+As an exercise, let's try computing a triangulation for cylinder disk without help of @c Prs3d_ToolDisk builder:
+
+~~~~{.cpp}
+void MyAisObject::Compute (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                           const Handle(Prs3d_Presentation)& thePrs,
+                           const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  if (theMode == MyDispMode_Main)
+  {
+    const int aNbSlices = 25;
+    Prs3d_ToolCylinder aCyl (aRadius, aRadius, aHeight, aNbSlices, aNbSlices);
+    Handle(Graphic3d_ArrayOfTriangles) aTris =
+      new Graphic3d_ArrayOfTriangles (aCyl.VerticesNb(),
+                                      3 * (aCyl.TrianglesNb()),
+                                      Graphic3d_ArrayFlags_VertexNormal);
+    aCyl.FillArray (aTris, gp_Trsf());
+
+    Handle(Graphic3d_ArrayOfTriangles) aTris2 =
+      new Graphic3d_ArrayOfTriangles (aNbSlices + 1, aNbSlices * 3, Graphic3d_ArrayFlags_VertexNormal);
+    aTris2->AddVertex (gp_Pnt (0.0, 0.0, aHeight), -gp::DZ());
+    for (int aSliceIter = 0; aSliceIter < aNbSlices; ++aSliceIter)
+    {
+      double anAngle = M_PI * 2.0 * double(aSliceIter) / double(aNbSlices);
+      aTris2->AddVertex (gp_Pnt (Cos (anAngle) * aRadius, Sin (anAngle) * aRadius, aHeight), -gp::DZ());
+    }
+    for (int aSliceIter = 0; aSliceIter < aNbSlices; ++aSliceIter)
+    {
+      aTris2->AddEdges (1, aSliceIter + 2, aSliceIter + 1 < aNbSlices ? (aSliceIter + 3) : 2);
+    }
+
+    Handle(Graphic3d_Group) aGroupTris = thePrs->NewGroup();
+    aGroupTris->SetGroupPrimitivesAspect (myDrawer->ShadingAspect()->Aspect());
+    aGroupTris->AddPrimitiveArray (aTris);
+    aGroupTris->AddPrimitiveArray (aTris2);
+    ...
+  }
+}
+~~~~
+
+@figure{ais_object_step3_quadrics_disk.png,"Manually triangulated disk.",409} height=409px
+
+The disk is here, but it has a strange color - like it is not affected by lighting.
+This happens when vertex normals are defined incorrectly.
+In our case we defined disk normal as @c -DZ (see the second argument of @c Graphic3d_ArrayOfTriangles::AddVertex()),
+but normal direction should be also aligned to triangulation winding rule.
+Graphic driver defines the front side of triangle using clockwise order of triangle nodes, and normal should be defined for a front side of triangle - e.g. it should be @c gp::DZ() in our case.
+After reversing vertex normal direction, cylinder looks exactly like when @c Prs3d_ToolDisk was used.
+
+Front / back face orientation might be displayed using different material based on @c Graphic3d_Aspects::SetDistinguish() flag and @c @::FrontMaterial() / @c @::BackMaterial() setup.
+
+@section ais_selection Computing selection
+In the first part of the tutorial we have created a custom @c AIS object @c MyAisObject computing presentation by implementing the @c PrsMgr_PresentableObject::Compute() interface.
+In this part we will extend our object with interactive capabilities and make it selectable through implementing @c SelectMgr_SelectableObject interface.
+
+Let's do the first step and put into @c @::ComputeSelection() method some logic.
+This method should fill in the @c SelectMgr_Selection argument with @c SelectMgr_SensitiveEntity entities defining selectable elements - triangulations, polylines, points and their composition.
+@c Select3D_SensitiveBox is probably the simplest way to define selectable volume - by it's bounding box:
+
+~~~~{.cpp}
+void MyAisObject::ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                    const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (aRadius, aHeight);
+  Bnd_Box aBox;
+  BRepBndLib::Add (aShape, aBox);
+  Handle(SelectMgr_EntityOwner) anOwner = new SelectMgr_EntityOwner (this);
+  Handle(Select3D_SensitiveBox) aSensBox = new Select3D_SensitiveBox (anOwner, aBox);
+  theSel->Add (aSensBox);
+}
+~~~~
+
+@c SelectMgr_EntityOwner is a key object in selection logic - it serves as an identifier of a pickable object or it's part.
+You may see this object in methods like @c AIS_InteractiveContext::DetectedOwner(), **Owners** are stored within the list of selection objects @c AIS_Selection
+and it received by methods like @c AIS_InteractiveContext::SetSelected() and @c AIS_InteractiveContext::AddOrRemoveSelected().
+From the Selector's point of view, @c AIS_InteractiveObject is just a drawer for @c SelectMgr_EntityOwner.
+
+The _**0th selection mode**_ normally defines a single Owner of the entire object.
+To make a composite object selectable as whole, we add to Selection as many SensitiveEntity as necessary referring to the same Owner.
+It might look confusing from first glance, that @c SelectMgr_SensitiveEntity stores @c SelectMgr_EntityOwner as a class field, and not in the opposite way
+(@c SelectMgr_EntityOwner doesn't store the list of @c SelectMgr_SensitiveEntity defining it's picking volume).
+
+For local selection (selection of object parts) we create individual Owners for each part and add SensitiveEntity to Selection in the same way.
+Owner may store an additional identifier as a class field, like @c StdSelect_BRepOwner stores @c TopoDS_Shape as an identifier of picked sub-shape with @c AIS_Shape object.
+
+In a similar way as @c StdPrs_ShadedShape is a **presentation builder** for @c TopoDS_Shape, the @c StdSelect_BRepSelectionTool can be seen as a standard **selection builder** for shapes:
+
+~~~~{.cpp}
+void MyAisObject::ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                    const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  TopoDS_Shape aShape = BRepPrimAPI_MakeCylinder (aRadius, aHeight);
+  Standard_Real aDefl = StdPrs_ToolTriangulatedShape::GetDeflection (aShape, myDrawer);
+  StdSelect_BRepSelectionTool::Load (theSel, this, aShape, TopAbs_SHAPE, aDefl,
+                                     myDrawer->DeviationAngle(),
+                                     myDrawer->IsAutoTriangulation());
+}
+~~~~
+
+Internally, @c StdSelect_BRepSelectionTool iterates over sub-shapes and appends to the Selection (@c theSel) entities like @c Select3D_SensitiveTriangulation (for faces) and @c Select3D_SensitiveCurve (for edges).
+
+Previously, we have used @c Prs3d_ToolCylinder to triangulate a cylinder, so let's try to construct @c Select3D_SensitivePrimitiveArray from the same triangulation:
+
+~~~~{.cpp}
+void MyAisObject::ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                    const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  Handle(SelectMgr_EntityOwner) anOwner = new SelectMgr_EntityOwner (this);
+  Handle(Graphic3d_ArrayOfTriangles) aTris =
+    Prs3d_ToolCylinder::Create (aRadius, aRadius, aHeight, 25, 25, gp_Trsf());
+  Handle(Select3D_SensitivePrimitiveArray) aSensTri =
+    new Select3D_SensitivePrimitiveArray (anOwner);
+  aSensTri->InitTriangulation (aTris->Attributes(), aTris->Indices(),
+                               TopLoc_Location());
+  theSel->Add (aSensTri);
+}
+~~~~
+
+Selection is computed independently from presentation, so that they don't have to match each other.
+But inconsistency between presentation and selection might confuse a user, when he will not be able to pick an object clearly displayed under the mouse cursor.
+These issues might happen, for example, when selection uses tessellated representation of the same geometry computed with different parameters (different number of subdivisions, or different deflection parameters).
+
+As in case of @c @::Compute(), it makes sense defining some enumeration of **selection modes** supported by specific object and reject unsupported ones to avoid unexpected behavior:
+
+~~~~{.cpp}
+void MyAisObject::ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                    const Standard_Integer theMode)
+{
+  if (theMode != 0) { return; }
+  ...
+}
+~~~~
+
+Unlike display modes, @c AIS_InteractiveContext allows activating an arbitrary combination of selection modes.
+A user should be careful to activate only the modes that actually make sense and may work together.
+
+Selection mode to activate could be specified while displaying the object (passing _**-1**_ instead of _**0**_ would display an object with deactivated selection):
+
+~~~~{.cpp}
+Handle(AIS_InteractiveContext) theCtx;
+Handle(MyAisObject) aPrs = new MyAisObject();
+theCtx->Display (aPrs, MyAisObject::MyDispMode_Main, 0, false);
+~~~~
+
+Later on @c AIS_InteractiveContext::SetSelectionModeActive(), or it's wrappers @c AIS_InteractiveContext::Activate() and @c AIS_InteractiveContext::Deactivate(),
+could be used to enable or disable desired selection modes one by one.
+
+@section sel_owner_highlight Highlighting selection owner
+
+As has been mentioned in the previous section, @c SelectMgr_EntityOwner is a key object which can be used as an identifier of selectable part(s).
+Naturally, you might want to subclass it to put some application-specific ids for identification of selected parts.
+But there are more things you may do with the Owner class like customized highlighting.
+
+Let's start from the beginning and define a custom Owner class:
+
+~~~~{.cpp}
+class MyAisOwner : public SelectMgr_EntityOwner
+{
+  DEFINE_STANDARD_RTTI_INLINE(MyAisOwner, SelectMgr_EntityOwner)
+public:
+  MyAisOwner (const Handle(MyAisObject)& theObj, int thePriority = 0)
+  : SelectMgr_EntityOwner (theObj, thePriority) {}
+
+  virtual void HilightWithColor (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                                 const Handle(Prs3d_Drawer)& theStyle,
+                                 const Standard_Integer theMode) override
+  { base_type::HilightWithColor (thePrsMgr, theStyle, theMode); }
+
+  virtual void Unhilight (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                          const Standard_Integer theMode) override
+  { base_type::Unhilight  (thePrsMgr, theMode); }
+protected:
+  Handle(Prs3d_Presentation) myPrs;
+};
+~~~~
+
+@c SelectMgr_EntityOwner doesn't define any pure virtual methods, and can be instanced straight ahead, like it was done within @c MyAisObject::ComputeSelection() implementation above.
+Let's revert usage of a dedicated display mode for highlighting (remove @c SetHilightMode() in @c MyAisObject constructor) and use our new class @c MyAisOwner within @c @::ComputeSelection():
+
+~~~~{.cpp}
+MyAisObject::MyAisObject()
+{
+  //SetHilightMode (MyDispMode_Highlight);
+  myDrawer->SetupOwnShadingAspect();
+  ...
+}
+
+void MyAisObject::ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                    const Standard_Integer theMode)
+{
+  const double aRadius = 100.0, aHeight = 100.0;
+  Handle(MyAisOwner) anOwner = new MyAisOwner (this);
+  ...
+}
+~~~~
+
+The further logic creating sensitive entities and filling in Selection could be left as is.
+Substitution of @c SelectMgr_EntityOwner with @c MyAisOwner currently doesn't change behavior and we see highlighting of the entire object through color modulation.
+This is because default implementation of @c SelectMgr_EntityOwner for highlighting logic looks like this (simplified):
+
+~~~~{.cpp}
+void SelectMgr_EntityOwner::HilightWithColor (
+  const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+  const Handle(Prs3d_Drawer)& theStyle,
+  const Standard_Integer theMode)
+{
+  const Graphic3d_ZLayerId aHiLayer =
+      theStyle->ZLayer() != Graphic3d_ZLayerId_UNKNOWN
+    ? theStyle->ZLayer()
+    : mySelectable->ZLayer();
+  thePrsMgr->Color (mySelectable, theStyle, theMode, NULL, aHiLayer);
+}
+~~~~
+
+@figure{ais_object_step4_highlight1.png,"Default behavior of @c SelectMgr_EntityOwner::HilightWithColor().",409} height=409px
+
+Now, let's override the @c SelectMgr_EntityOwner::HilightWithColor() method and display a bounding box presentation:
+
+~~~~{.cpp}
+void MyAisOwner::HilightWithColor (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                                   const Handle(Prs3d_Drawer)& theStyle,
+                                   const Standard_Integer theMode)
+{
+  if (myPrs.IsNull())
+  {
+    myPrs = new Prs3d_Presentation (thePrsMgr->StructureManager());
+    MyAisObject* anObj = dynamic_cast<MyAisObject*> (mySelectable);
+    anObj->Compute (thePrsMgr, myPrs, MyAisObject::MyDispMode_Highlight);
+  }
+  if (!thePrsMgr->IsImmediateModeOn())
+  {
+    myPrs->Display();
+  }
+}
+~~~~
+
+@c SelectMgr_EntityOwner::HilightWithColor() doesn't receive a presentation to fill in as an argument; highlight presentation should be manually created and even explicitly displayed on the screen.
+To avoid code duplication, the code above reuses @c MyAisObject::Compute() already implementing computation of highlight presentation.
+
+@figure{ais_object_step4_highlight2.png,"Result of custom implementation @c MyAisOwner::HilightWithColor().",409} height=409px
+
+The visual result of the selected object looks exactly the same as when we've used a dedicated highlight mode.
+One thing became broken, though - highlighting remains displayed even after clearing selection.
+To fix this issue, we need implementing @c SelectMgr_EntityOwner::Unhilight() and hide our custom presentation explicitly:
+
+~~~~{.cpp}
+void MyAisOwner::Unhilight (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                            const Standard_Integer theMode)
+{
+  if (!myPrs.IsNull()) { myPrs->Erase(); }
+}
+~~~~
+
+Another problem is that the object is no longer dynamically highlighted.
+To fix that we need to handle @c PrsMgr_PresentationManager::IsImmediateModeOn() specifically.
+Within this mode turned ON, presentation should be displayed on the screen with help of @c PrsMgr_PresentationManager::AddToImmediateList() method
+(it will be cleared from the screen automatically on the next mouse movement):
+
+~~~~{.cpp}
+void MyAisOwner::HilightWithColor (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                                   const Handle(Prs3d_Drawer)& theStyle,
+                                   const Standard_Integer theMode)
+{
+  if (myPrs.IsNull())
+  {
+    myPrs = new Prs3d_Presentation (thePrsMgr->StructureManager());
+    MyAisObject* anObj = dynamic_cast<MyAisObject*> (mySelectable);
+    anObj->Compute (thePrsMgr, myPrs, MyAisObject::MyDispMode_Highlight);
+  }
+  if (thePrsMgr->IsImmediateModeOn())
+  {
+    Handle(Prs3d_PresentationShadow) aShadow =
+      new Prs3d_PresentationShadow (thePrsMgr->StructureManager(), myPrs);
+    aShadow->SetZLayer (Graphic3d_ZLayerId_Top);
+    aShadow->Highlight (theStyle);
+    thePrsMgr->AddToImmediateList (aShadow);
+  }
+  else
+  {
+    myPrs->Display();
+  }
+}
+~~~~
+
+We may create two dedicated presentations for dynamic highlighting or reuse existing one for both cases with help of a transient object @c Prs3d_PresentationShadow.
+
+Let's go further and make dynamic highlighting a little bit more interesting - by drawing a surface normal at the point where mouse picked the object:
+
+~~~~{.cpp}
+void MyAisOwner::HilightWithColor (const Handle(PrsMgr_PresentationManager)& thePrsMgr,
+                                   const Handle(Prs3d_Drawer)& theStyle,
+                                   const Standard_Integer theMode)
+{
+  MyAisObject* anObj = dynamic_cast<MyAisObject*> (mySelectable);
+  if (thePrsMgr->IsImmediateModeOn())
+  {
+    Handle(StdSelect_ViewerSelector) aSelector =
+      anObj->InteractiveContext()->MainSelector();
+    SelectMgr_SortCriterion aPickPnt;
+    for (int aPickIter = 1; aPickIter <= aSelector->NbPicked(); ++aPickIter)
+    {
+      if (aSelector->Picked (aPickIter) == this)
+      {
+        aPickPnt = aSelector->PickedData (aPickIter);
+        break;
+      }
+    }
+
+    Handle(Prs3d_Presentation) aPrs = mySelectable->GetHilightPresentation (thePrsMgr);
+    aPrs->SetZLayer (Graphic3d_ZLayerId_Top);
+    aPrs->Clear();
+    Handle(Graphic3d_Group) aGroup = aPrs->NewGroup();
+    aGroupPnt->SetGroupPrimitivesAspect (theStyle->ArrowAspect()->Aspect());
+    gp_Trsf aTrsfInv = mySelectable->LocalTransformation().Inverted();
+    gp_Dir  aNorm (aPickPnt.Normal.x(), aPickPnt.Normal.y(), aPickPnt.Normal.z());
+    Handle(Graphic3d_ArrayOfTriangles) aTris =
+      Prs3d_Arrow::DrawShaded (gp_Ax1(aPickPnt.Point, aNorm).Transformed (aTrsfInv),
+        1.0, 15.0,
+        3.0, 4.0, 10);
+    aGroupPnt->AddPrimitiveArray (aTris);
+    thePrsMgr->AddToImmediateList (aPrs);
+  }
+}
+~~~~
+
+Code above does not store our new highlight presentation as a property of @c MyAisOwner, and instead uses @c SelectMgr_SelectableObject::GetHilightPresentation() method
+to create a presentation stored directly inside of our interactive object.
+
+Next trick is passing through the last picking results in @c StdSelect_ViewerSelector.
+Dynamic highlighting is expected to be called right after picking, so that highlighted Owner should be always found in picking results.
+@c StdSelect_ViewerSelector::Picked() returns entities in the descending order of their distance from picking ray origin (mouse cursor);
+normally our Owner should be the very first one in this list when no selection filters are assigned to @c AIS_InteractiveContext.
+
+@c SelectMgr_SortCriterion provides us useful information like 3D point on detected object lying on the picking ray, and surface normal direction at this point (actually, it would be a normal to a picked triangle),
+which we display as an arrow with help of @c Prs3d_Arrow presentation builder.
+
+@figure{ais_object_step4_highlight3.png,"Surface normal on mouse over.",409} height=409px
+
+Result looks pretty nice on the screenshot, but has interaction problems - once displayed, an arrow is no longer updated with further mouse movements.
+But this behavior is not a bug - @c AIS calls @c MyAisOwner::HilightWithColor() only when picking Owner changes to avoid unnecessary Viewer updates.
+To override this behavior, we may override @c SelectMgr_EntityOwner::IsForcedHilight() option:
+
+~~~~{.cpp}
+class MyAisOwner : public SelectMgr_EntityOwner
+{
+...
+  virtual bool IsForcedHilight() const override { return true; }
+};
+~~~~
+
+This solves the problem within our specific use case.
+Keep in mind that most objects don't need updating highlight presentation on every mouse move;
+overriding this flag everywhere would be a waste of resources and may cause performance issues - use it sparingly.
+
+@section highlight_apporaches Highlighting approaches
+
+@c AIS provides one more alternative to handle presentation highlighting, which is managed by option @c SelectMgr_SelectableObject::IsAutoHilight().
+By default, this option is turned ON and redirects highlighting logic to @c SelectMgr_EntityOwner::HilightWithColor() demonstrated in the previous section.
+Turning this option OFF redirects highlighting logic to the interactive object itself @c SelectMgr_SelectableObject::HilightSelected().
+
+Apart from moving the logic from Owner to Interactive Object, this approach allows handling highlighting of all selected Owners within the same Object at once and sharing a common presentation
+instead of per-Owner presentation - improving performance and reducing memory utilization in case of a large number of small selectable elements, like mesh nodes in @c MeshVS_Mesh object.
+
+The further optimization of such a scenario would be using a single Owner for the entire Object
+storing the list of selected elements within the Owner itself - as utilized by @c AIS_PointCloud object for highlighting individual points.
+
+We wouldn't describe these advanced techniques here in detail - let's just summarize main highlighting approaches available in @c AIS:
+- Highlighting of a main presentation of Interactive Object (active display mode)
+  filled in by @c PrsMgr_PresentableObject::Compute()
+  and displayed with color modulation by @c AIS logic.
+  - Example: @c AIS_TextLabel.
+- Highlighting of a secondary presentation of Interactive Object
+  filled in by @c PrsMgr_PresentableObject::Compute()
+  and displayed with color modulation by @c AIS logic.
+  - Example: @c AIS_Shape, displayed in @c AIS_Shaded display mode and highlighted using @c AIS_Wireframe display mode (default behavior).
+    See also @c PrsMgr_PresentableObject::SetHilightMode().
+- Highlight presentation stored within a custom @c SelectMgr_EntityOwner
+  and managed by @c SelectMgr_EntityOwner::HilightWithColor().
+  - Example: @c StdSelect_BRepOwner for selection of sub-shapes.
+- Custom highlight presentation stored within Interactive Object itself
+  (see @c SelectMgr_SelectableObject::GetHilightPresentation() / @c @::GetSelectPresentation() methods).
+  - Filled in by @c SelectMgr_EntityOwner::HilightWithColor()
+    with @c SelectMgr_SelectableObject::IsAutoHilight() turned ON.<br>
+    Example: @c AIS_PointCloud.
+  - Filled in by @c SelectMgr_SelectableObject::HilightSelected()
+    with @c SelectMgr_SelectableObject::IsAutoHilight() turned OFF.<br>
+    Example: @c MeshVS_Mesh.
+- Main presentation of Interactive Object (active display mode)
+  filled in by @c PrsMgr_PresentableObject::Compute()
+  and manually updated (recomputed or modified aspects) on highlight events.
+  - Example: @c AIS_Manipulator.
+
+The number of options looks overwhelming but in general, it is better to stick to the simplest approach working for you and consider alternatives only when you have to.
+
+@section mouse_click Mouse click
+
+Dynamic highlighting is only one of scenarios where @c SelectMgr_EntityOwner could be useful.
+Another feature is an interface for handling a mouse click @c SelectMgr_EntityOwner @c @::HandleMouseClick().
+
+This interface is useful for defining some user interface elements like buttons, and most likely your application will use a more comprehensive GUI framework for this purpose instead of @c AIS.
+But let's have some fun and make our object to change a color on each mouse click:
+
+~~~~{.cpp}
+class MyAisOwner : public SelectMgr_EntityOwner
+{
+...
+  virtual bool HandleMouseClick (const Graphic3d_Vec2i& thePoint,
+                                 Aspect_VKeyMouse theButton,
+                                 Aspect_VKeyFlags theModifiers,
+                                 bool theIsDoubleClick) override;
+};
+
+bool MyAisOwner::HandleMouseClick (const Graphic3d_Vec2i& thePoint,
+                                   Aspect_VKeyMouse theButton,
+                                   Aspect_VKeyFlags theModifiers,
+                                   bool theIsDoubleClick)
+{
+  static math_BullardGenerator aRandGen;
+  Quantity_Color aRandColor (float(aRandGen.NextInt() % 256) / 255.0f,
+                             float(aRandGen.NextInt() % 256) / 255.0f,
+                             float(aRandGen.NextInt() % 256) / 255.0f,
+                             Quantity_TOC_sRGB);
+  mySelectable->Attributes()->ShadingAspect()->SetColor(aRandColor);
+  mySelectable->SynchronizeAspects();
+  return true;
+}
+~~~~
+
+Looks pretty simple. Now let's make things more interesting and launch some simple object animation on each click.
+We use a couple of global (@c static) variables in our sample for simplicity - don't do that in a real production code.
+
+~~~~{.cpp}
+class MyAisOwner : public SelectMgr_EntityOwner
+{
+...
+  void SetAnimation (const Handle(AIS_Animation)& theAnim)
+  { myAnim = theAnim; }
+...
+  Handle(AIS_Animation) myAnim;
+};
+
+bool MyAisOwner::HandleMouseClick (const Graphic3d_Vec2i& thePoint,
+                                   Aspect_VKeyMouse theButton,
+                                   Aspect_VKeyFlags theModifiers,
+                                   bool theIsDoubleClick)
+{
+  static bool isFirst = true;
+  isFirst = !isFirst;
+  MyAisObject* anObj = dynamic_cast<MyAisObject*> (mySelectable);
+  gp_Trsf aTrsfTo;
+  aTrsfTo.SetRotation (gp_Ax1 (gp::Origin(), gp::DX()),
+                       isFirst ? M_PI * 0.5 : -M_PI * 0.5);
+  gp_Trsf aTrsfFrom = anObj->LocalTransformation();
+  Handle(AIS_AnimationObject) anAnim =
+    new AIS_AnimationObject ("MyAnim", anObj->InteractiveContext(),
+                             anObj, aTrsfFrom, aTrsfTo);
+  anAnim->SetOwnDuration (2.0);
+
+  myAnim->Clear();
+  myAnim->Add (anAnim);
+  myAnim->StartTimer (0.0, 1.0, true);
+  return true;
+}
+~~~~
+
+Animation is a complex topic that is worth a dedicated article - let's not go too deep in detail here.
+To perform animation in a non-interrupted way, it should be handled by some class like @c AIS_ViewController, which is responsible for managing user input events and for 3D viewer updates.
+To utilize it, you need adding a custom object animation to @c AIS_ViewController::ObjectsAnimation() or adding custom view animation to @c AIS_ViewController::ViewAnimation().
+Somewhere in application this might look like this:
+
+~~~~{.cpp}
+Handle(AIS_InteractiveContext) theCtx;
+Handle(AIS_ViewController) theViewCtrl;
+Handle(MyAisObject) aPrs = new MyAisObject();
+aPrs->SetAnimation (theViewCtrl->ObjectsAnimation());
+theCtx->Display (aPrs, MyAisObject::MyDispMode_Main, 0, false);
+~~~~
+
+@section final Final result
+
+The final sample could be seen by calling @c QATutorialAisObject command from Draw Harness plugin @c QAcommands (@c TKQADraw toolkit):
+
+~~~~
+pload VISUALIZATION QAcommands
+vinit View1
+QATutorialAisObject p
+vfit
+~~~~
+
+You may also take a look onto source code of this command at @c src/QADraw/QADraw_Tutorials.cxx if you have some problems following the tutorial.