OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-04-10 18:51:21 +03:00
Code
occt/tests/bugs/modalg_5
History
pkv 0090ae85ab 0025788: Parallelization of the BOP Builder algorithm on second level 
Changes:
class BOPAlgo_Builder
method:
  void BOPAlgo_Builder::FillIn3DParts
  (BOPCol_DataMapOfShapeListOfShape&,
   BOPCol_DataMapOfShapeShape&,
   const BOPCol_BaseAllocator& )
has been optimized and
modified to provide parallel treatment.

Correction of compilation errors

Test cases for issue CR25788
2015-02-12 11:58:02 +03:00
..
begin
0023793: Tests failing when launched without data files
2013-03-01 14:23:17 +04:00
bug20040
0020040: Difference in treatment of closed curves in BRep_Builder::UpdateEdge
2015-01-22 17:44:39 +03:00
bug21898
0021898: Empty result of intersection between a surface of revolution and a line
2014-10-30 12:58:51 +03:00
bug22027
0022027: <bop> command between two faces raises exception
2013-03-15 12:20:25 +04:00
bug22323
Adjusting testing cases for current state of OCCT
2013-02-25 18:34:25 +04:00
bug22614_1
0022614: Scaling fails with linear (p-)curves
2014-10-09 16:18:46 +04:00
bug22614_2
0022614: Scaling fails with linear (p-)curves
2014-10-09 16:18:46 +04:00
bug22614_3
0022614: Scaling fails with linear (p-)curves
2014-10-09 16:18:46 +04:00
bug22747
Adding new tests cases from chl grid
2013-03-01 14:32:42 +04:00
bug22766
0022766: Wrong results done by several algorithms for the case of intersection between a surface of revolution and a plane
2013-05-16 11:38:13 +04:00
bug22829
0022829: Incorrect result of boolean Fuse operation
2014-10-30 13:45:05 +03:00
bug22831
0025194: It is necessary to orthogonalize transformation matrix in gp_Trsf and gp_Trsf2d classes
2014-09-25 15:58:39 +04:00
bug22872
0022872: BRepClass3d_SolidClassifier::PerformInfinitePoint fails
2014-10-30 13:05:31 +03:00
bug22978
0022978: Shading for a pipe shape is wrong
2014-07-10 14:52:44 +04:00
bug22981
0022981: BRepOffsetAPI_ThruSections fails to build a surface from closed wires
2013-03-15 12:30:59 +04:00
bug23122
0023122: Operation "cut" crashes on attached shapes.
2013-03-15 12:17:32 +04:00
bug23249
0023249: BRepFeat_SplitShape could not split a simple face by edge
2014-10-30 12:10:34 +03:00
bug23282_1
0023512: Incorrect triangulation on revolution shape
2013-04-12 13:24:07 +04:00
bug23282_2
0023512: Incorrect triangulation on revolution shape
2013-04-12 13:24:07 +04:00
bug23366
0023366: Cut operation produces invalid shape
2013-03-15 12:22:43 +04:00
bug23375_1
0024036: Regression: sewing is not correct
2013-09-12 14:04:59 +04:00
bug23402
0023402: Issue in BRepAlgoAPI_Common - SOLID and FACE
2013-05-16 11:31:43 +04:00
bug23625_1
0023511: The function BRepTools::UVBounds provides icorrect result for a face
2014-05-22 17:55:31 +04:00
bug23625_2
0023625: New functionality building reflect lines on a shape
2013-07-12 12:24:21 +04:00
bug23625_3
0023625: New functionality building reflect lines on a shape
2013-07-12 12:24:21 +04:00
bug23625_4
0023625: New functionality building reflect lines on a shape
2013-07-12 12:24:21 +04:00
bug23625_5
0023625: New functionality building reflect lines on a shape
2013-07-12 12:24:21 +04:00
bug23698
0023698: BRepBuilderAPI_Copy creates invalid copy
2014-10-23 14:00:26 +04:00
bug23706_1
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_2
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
2014-01-16 12:20:52 +04:00
bug23706_3
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_4
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_5
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_6
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_7
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_8
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_9
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_10
0025004: Extrema curve/curve incorrect result
2014-07-03 17:11:20 +04:00
bug23706_11
0025058: Regression of performance of BRepExtrema_ExtCC (1000 times slower)
2014-07-17 13:51:44 +04:00
bug23706_12
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug23706_13
Modified CPU limit in test cases inDebug mode.
2014-06-17 17:18:18 +04:00
bug23706_14
0025708: GeomAPI_ExtremaCurveCurve does not return all intersection points in 6.8.0
2015-02-05 16:03:36 +03:00
bug23706_15
0024608: Development of methods of global optimization of multivariable function
2014-05-15 17:51:44 +04:00
bug23706_16
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_17
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_19
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_20
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_21
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_22
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_24
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_26
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_27
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_28
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_29
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_31
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_32
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_33
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_34
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_36
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_37
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_38
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_39
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_40
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_41
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_42
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_43
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_44
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_45
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_46
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_47
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_48
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_49
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_50
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_51
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_52
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_53
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_54
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_55
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_56
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_57
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_58
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_59
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_60
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23706_61
0023706: Cannot project point on curve
2013-06-13 15:12:06 +04:00
bug23708
0023708: The correct shape is interpreted as invalid
2013-11-28 10:37:03 +04:00
bug23777
0023777: 2D-Classifier algorithm produces wrong results for a point and face.
2013-03-07 14:25:51 +04:00
bug23782
0023782: Intersection algorithm produces wrong section curves for the attached faces
2013-07-12 12:23:01 +04:00
bug23785
0023785: Crash on make face from wire
2013-03-22 17:08:06 +04:00
bug23823
Adding test cases
2013-06-20 17:03:56 +04:00
bug23824_1
0023824: Bad results of sweep operation when a path curve has unpredictable torsion along its way.
2013-03-22 17:10:51 +04:00
bug23824_2
Adjusting testing cases for current state of OCCT
2013-03-25 18:37:19 +04:00
bug23824_3
0023824: Bad results of sweep operation when a path curve has unpredictable torsion along its way.
2013-03-22 17:10:51 +04:00
bug23824_4
Adjusting testing cases for current state of OCCT
2013-03-25 18:37:19 +04:00
bug23826
Adding test cases
2013-06-20 17:03:56 +04:00
bug23839_1
0023839: Projection algorithm produces wrong results for set of data
2013-07-18 12:54:38 +04:00
bug23839_2
0023839: Projection algorithm produces wrong results for set of data
2013-07-18 12:54:38 +04:00
bug23839_3
0023839: Projection algorithm produces wrong results for set of data
2013-07-18 12:54:38 +04:00
bug23839_4
0023839: Projection algorithm produces wrong results for set of data
2013-07-18 12:54:38 +04:00
bug23839_5
0023839: Projection algorithm produces wrong results for set of data
2013-07-18 12:54:38 +04:00
bug23839_6
0023839: Projection algorithm produces wrong results for set of data
2013-07-18 12:54:38 +04:00
bug23839_7
0023839: Projection algorithm produces wrong results for set of data
2013-07-18 12:54:38 +04:00
bug23845
Adjusting testing cases for current state of OCCT
2013-03-25 18:37:19 +04:00
bug23849_1
Adjusting testing cases for current state of OCCT
2013-03-25 18:37:19 +04:00
bug23849_2
Adjusting testing cases for current state of OCCT
2013-03-25 18:37:19 +04:00
bug23849_3
Adjusting testing cases for current state of OCCT
2013-03-25 18:37:19 +04:00
bug23853_1
0023853: BOP regression (2) - BRepAlgoAPI_Cut.
2013-04-12 13:29:02 +04:00
bug23853_2
0023853: BOP regression (2) - BRepAlgoAPI_Cut.
2013-04-12 13:29:02 +04:00
bug23853_3
0023853: BOP regression (2) - BRepAlgoAPI_Cut.
2013-04-12 13:29:02 +04:00
bug23853_4
0023853: BOP regression (2) - BRepAlgoAPI_Cut.
2013-04-12 13:29:02 +04:00
bug23855
0023855: Old BOPs fail on Win7 64bit when using TBB
2014-01-30 12:59:32 +04:00
bug23870_1
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
2014-01-16 12:20:52 +04:00
bug23870_2
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
2014-01-16 12:20:52 +04:00
bug23870_3
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
2014-01-16 12:20:52 +04:00
bug23870_4
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
2014-01-16 12:20:52 +04:00
bug23870_5
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
2014-01-16 12:20:52 +04:00
bug23876
0023876: New Boolean Operation algorithm works incorrect with cylinder made by revolution and torus.
2013-04-12 13:26:04 +04:00
bug23881
0023881: BRepAlgoAPI_Section HasAncestorFaceOn1 returned False on the boundary(6.6.0 beta).
2013-04-15 18:19:01 +04:00
bug23884
0025266: Debug statements in the source are getting flushed on to the console
2014-10-16 16:44:56 +04:00
bug23891_1
0023891: Function fsameparameter throws an exception.
2013-04-15 18:22:32 +04:00
bug23891_2
0023891: Function fsameparameter throws an exception.
2013-04-15 18:22:32 +04:00
bug23891_3
0023891: Function fsameparameter throws an exception.
2013-04-15 18:22:32 +04:00
bug23891_4
0023891: Function fsameparameter throws an exception.
2013-04-15 18:22:32 +04:00
bug23892
0023892: Missing intersection edge between two faces.
2014-04-04 12:57:33 +04:00
bug23903
0023903: Invalid result of pipe operation on closed path
2013-05-16 11:35:11 +04:00
bug23906
0023547: Tests failures in debug mode
2014-10-16 16:45:13 +04:00
bug23932_1
0023932: Standard_NoSuchObject thrown computing section between two cylinders - new to 6.6.0
2013-10-04 12:43:26 +04:00
bug23932_2
0023932: Standard_NoSuchObject thrown computing section between two cylinders - new to 6.6.0
2013-10-04 12:43:26 +04:00
bug23933
0023933: Self intersection reported after Fuse operation.
2013-05-23 11:55:08 +04:00
bug23948_1
0023948: Wrong intersection between a surface of revolution and a plane.
2014-08-28 17:38:09 +04:00
bug23948_2
0023948: Wrong intersection between a surface of revolution and a plane.
2014-08-28 17:38:09 +04:00
bug23952_1
0024500: Sudden exit of DRAW after multiple execution of test in cycle
2015-02-05 18:09:12 +03:00
bug23952_2
0024500: Sudden exit of DRAW after multiple execution of test in cycle
2015-02-05 18:09:12 +03:00
bug23954
Update test cases database
2014-03-20 14:22:54 +04:00
bug23958
Adjusting testing cases for Debug mode
2014-09-05 14:02:28 +04:00
bug23976
Adding test cases
2013-06-20 17:03:56 +04:00
bug23985
Adjusting testing cases for current state of OCCT
2013-06-03 14:45:39 +04:00
bug23991
0024400: Wrong result obtained by Section
2013-11-28 11:11:22 +04:00
bug23998
0023998: Bad result of intersection of two faces: curve has a loop
2013-06-20 15:46:20 +04:00
bug24003
Adding test cases
2013-06-20 17:03:56 +04:00
bug24005
0024223: Review of unstable test cases
2013-11-01 10:39:46 +04:00
bug24012
0024413: Visualization - get rid of projection shift from orthographic camera definition
2014-03-06 15:50:33 +04:00
bug24029
0024933: Inconsistent results of self-interferences checker in SALOME and DRAW Applications.
2014-05-22 17:25:13 +04:00
bug24033
0024033: All the orientation as a result of BRepAlgoAPI_Common is set to INTERNAL
2013-07-04 14:23:22 +04:00
bug24035
0024142: Wrong section curve
2013-09-26 20:36:30 +04:00
bug24036
0024036: Regression: sewing is not correct
2013-09-12 14:04:59 +04:00
bug24037_1
0024037: Wrong result done by General Fuse algorithm
2013-07-04 14:21:44 +04:00
bug24037_2
0024037: Wrong result done by General Fuse algorithm
2013-07-04 14:21:44 +04:00
bug24040
0024040: The result of CUT operation is not correct
2013-07-04 14:19:17 +04:00
bug24053
0024053: Section between plane and sphere is not correct
2013-07-04 14:26:05 +04:00
bug24060
0024060: Wrong result done by general fuse algorithm.
2013-07-12 12:42:42 +04:00
bug24074
Correction of testing cases
2014-10-17 16:40:22 +04:00
bug24075
0024075: Boolean Section between two faces fails
2013-07-18 13:06:06 +04:00
bug24083
0024083: BRepCheck_Wire crashes processing a wire consisting of many edges
2013-08-22 13:40:52 +04:00
bug24086
Removing TODO in testing cases due to improvements
2014-09-26 14:29:56 +04:00
bug24089
0024089: Missing section edge
2013-08-15 17:23:37 +04:00
bug24092
0024092: Boolean fuse fails
2013-08-15 17:23:30 +04:00
bug24107
0024107: BRepAlgo::ConcatenateWireC0 method doesn't work on a translated wire
2013-08-22 12:29:02 +04:00
bug24140
0024140: Endless loop in BRepAlgoAPI_Section
2013-10-03 15:48:51 +04:00
bug24143
0024143: bopcheck command throws an exception
2013-09-12 14:15:03 +04:00
bug24144_1
0024144: BRepPrimAPI_MakeWedge wrong
2013-10-17 12:38:07 +04:00
bug24144_2
0024144: BRepPrimAPI_MakeWedge wrong
2013-10-17 12:38:07 +04:00
bug24154
0025600: Wrong result of Boolean FUSE operation
2014-12-25 18:09:43 +03:00
bug24157_1
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24157_2
Adjusting testing cases for Debug mode
2014-09-05 14:02:28 +04:00
bug24157_3
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24157_4
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24157_5
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24157_6
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24157_7
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24157_8
Adjusting testing cases for Debug mode
2014-09-05 14:02:28 +04:00
bug24157_9
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24157_10
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24174_1
0024174: [regression] BRepBuilderAPI_Sewing returns result with very high tolerance
2013-10-03 16:38:36 +04:00
bug24174_2
0024174: [regression] BRepBuilderAPI_Sewing returns result with very high tolerance
2013-10-03 16:38:36 +04:00
bug24187
0024187: Wrong result of COMMON operation.
2013-09-26 17:17:30 +04:00
bug24190
Modified CPU limit in test cases inDebug mode.
2014-06-17 17:18:18 +04:00
bug24200
0024608: Development of methods of global optimization of multivariable function
2014-05-15 17:51:44 +04:00
bug24203
0024203: Command "sameparameter" in DRAW on attached edge set tolerance equal to 116.
2014-01-30 13:01:08 +04:00
bug24204
0024204: The algorithm BRepOffsetAPI_MakePipeShell produces resulting shape with unwarrantably big tolerance
2014-01-16 12:20:52 +04:00
bug24208_1
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_2
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_3
0023511: The function BRepTools::UVBounds provides icorrect result for a face
2014-05-22 17:55:31 +04:00
bug24208_4
0023511: The function BRepTools::UVBounds provides icorrect result for a face
2014-05-22 17:55:31 +04:00
bug24208_5
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_6
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_7
0023511: The function BRepTools::UVBounds provides icorrect result for a face
2014-05-22 17:55:31 +04:00
bug24208_8
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_9
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_10
0023511: The function BRepTools::UVBounds provides icorrect result for a face
2014-05-22 17:55:31 +04:00
bug24208_11
0023511: The function BRepTools::UVBounds provides icorrect result for a face
2014-05-22 17:55:31 +04:00
bug24208_12
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_13
0024673: Test cases for the new Edge/Edge intersection algorithm
2014-03-06 15:50:26 +04:00
bug24208_14
0023511: The function BRepTools::UVBounds provides icorrect result for a face
2014-05-22 17:55:31 +04:00
bug24213
0024213: bopargcheck complains on sphere
2013-10-03 14:23:04 +04:00
bug24220
0024220: bopargcheck returns valid for C0 shape but results of boolean operations are broken with such shapes
2013-10-10 14:28:02 +04:00
bug24242
0024242: Hang-up during classification a 3D point relative to a solid
2013-10-17 12:20:17 +04:00
bug24244
0024244: Command bclear in DRAW does not clear all the data required for BOP re-initialization
2013-10-17 12:29:37 +04:00
bug24247
0024247: Wrong result obtained by General Fuse algorithm
2013-10-17 12:18:23 +04:00
bug24266
0024266: Wrong result obtained by 'bopargcheck'
2013-10-24 16:03:27 +04:00
bug24286
0024286: Wrong result done by General Fuse algorithm.
2013-11-01 10:04:04 +04:00
bug24290_1
0024290: BOP Section produces incorrect result.
2013-11-14 16:42:29 +04:00
bug24290_2
0024290: BOP Section produces incorrect result.
2013-11-14 16:42:29 +04:00
bug24299
0024472: Wrong section curves
2014-02-07 11:15:22 +04:00
bug24303
0024303: Precision degradation for Geom2dGcc_Circ2d2TanRad in OCCT6.6.0.
2013-11-14 11:12:40 +04:00
bug24305
0024305: New option in BRepOffsetAPI_MakePipeShell algorithm: the swept shell with varying width of section bounded by auxiliary spine
2013-11-14 12:38:08 +04:00
bug24313
0024313: BRepAlgoAPI_Section and IntTools_FaceFace aren't written to handle Geom_SurfaceOfLinearExtrusion
2013-12-06 13:10:39 +04:00
bug24327
0024398: Output of extrema draw-command has various format on optimise and debug modes
2013-11-28 11:26:32 +04:00
bug24328
0024328: Revolution of a wire generates two interfered faces.
2013-11-21 13:34:18 +04:00
bug24347
0024347: problem by tolerance of the distance of Face and Vertex
2014-04-30 13:07:06 +04:00
bug24359
0024359: Crash on BRepAlgoAPI_Fuse
2013-12-06 13:10:41 +04:00
bug24360
0024360: Hang up trying to intersect two faces
2013-11-21 17:19:31 +04:00
bug24390_1
0024390: Sewing produces the result with huge tolerance
2013-11-28 10:31:44 +04:00
bug24390_2
0024390: Sewing produces the result with huge tolerance
2013-11-28 10:31:44 +04:00
bug24400
0024400: Wrong result obtained by Section
2013-11-28 11:11:22 +04:00
bug24404
0024404: The function BRepTools::UVBounds gives wrong result for the face
2014-10-30 13:46:45 +03:00
bug24422
0024422: Wrong result done by FaceClassifier algorithm
2013-12-12 19:36:46 +04:00
bug24463
0024463: BRepAlgo_Section::Build hangs
2013-12-26 15:49:56 +04:00
bug24470
0024470: Wrong result done by General Fuse algorithm.
2014-01-09 12:01:48 +04:00
bug24472
Adjusting new testing cases
2014-12-05 14:39:29 +03:00
bug24481_1
0024481: Test "Perform Infinite Point" provides wrong result for a solid
2014-01-30 13:38:07 +04:00
bug24481_2
0024481: Test "Perform Infinite Point" provides wrong result for a solid
2014-01-30 13:38:07 +04:00
bug24484
0024484: sprops gives incorrect matrix of inertia and moments
2013-12-26 15:31:24 +04:00
bug24492
0024492: The command bopargcheck produces wrong results for cases.
2013-12-26 15:45:09 +04:00
bug24493
0024493: Partition algorithm produces not valid shape(splt of 10 faces)
2014-03-20 13:40:55 +04:00
bug24496
0024496: Crash on BRepAlgoAPI_Section
2014-04-30 13:07:03 +04:00
bug24499
Update testing case for issue 0024499
2014-02-17 12:48:34 +04:00
bug24504
0024504: Wrong result obtained by Exterma Curve/Curve.
2014-09-18 14:45:58 +04:00
bug24505
0024505: Wrong section curves between Cone and Cylinder with collinear axes.
2014-01-16 21:05:24 +04:00
bug24519
0024519: Intersection of a cylinder and a plane does not return
2014-11-05 16:49:15 +03:00
bug24532
0024532: BRepOffsetAPI_MakePipeShell raises an exception in a case with auxiliary guide
2014-01-20 14:45:29 +04:00
bug24558
0025597: Invalid curve on surface in the result of General Fuse operation
2015-01-22 17:02:30 +03:00
bug24573
0024573: Wrong result of 2d-offset algorithm on customer's shape
2014-01-30 16:08:20 +04:00
bug24575
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug24581
0024581: BuildSweep fails to trim components of resulting shape at spine knuckles when parameter -C is used
2014-08-28 17:38:08 +04:00
bug24585_1
0024585: Wrong pcurve of the section curve
2014-02-13 14:04:42 +04:00
bug24585_2
0024585: Wrong pcurve of the section curve
2014-02-13 14:04:42 +04:00
bug24586
0024586: Pipe construction is failed
2014-02-13 14:04:34 +04:00
bug24597
0024597: Missing internal vertex in the result of General Fuse Operation
2014-02-07 11:15:30 +04:00
bug24612
0025266: Debug statements in the source are getting flushed on to the console
2014-10-16 16:44:56 +04:00
bug24618_1
0024618: Embedding vertex in BOP depends on the order of arguments
2014-02-20 16:56:10 +04:00
bug24618_2
0024618: Embedding vertex in BOP depends on the order of arguments
2014-02-20 16:56:10 +04:00
bug24618_3
0024618: Embedding vertex in BOP depends on the order of arguments
2014-02-20 16:56:10 +04:00
bug24618_4
0024618: Embedding vertex in BOP depends on the order of arguments
2014-02-20 16:56:10 +04:00
bug24620
0024620: BOPAlgo_CheckerSI returns interferences that are not sub-shapes of the source shape
2014-02-20 17:10:47 +04:00
bug24628
0024628: Intersection result is unfixed
2014-03-06 15:50:28 +04:00
bug24639
0024639: Parallelization FillDS part of BO
2014-03-06 15:50:29 +04:00
bug24643
0024643: No section curve between plane and cone
2014-12-11 16:28:16 +03:00
bug24648
0024648: Different types of intersection curves between Cone and Torus with a different order of arguments
2014-02-20 17:17:13 +04:00
bug24650
0024650: Wrong intersection curves obtained for a surface of revolution and a plane.
2014-03-06 15:50:31 +04:00
bug24654
0024654: Result of Boolean operation is invalid for bopargcheck if rotated
2014-02-27 18:51:55 +04:00
bug24655
0024655: Boolean common produces incorrect result
2014-02-27 18:17:01 +04:00
bug24656
0024656: Exception on current version of OCC libraries during perform of boolean operation (Regression)
2014-04-10 17:54:55 +04:00
bug24667
0024667: BRepOffsetAPI_MakePipe::FirstShape() and LastShape() return shapes not from result
2014-03-13 14:25:14 +04:00
bug24684
0024684: Command fixshape hangs up on the attached shape
2014-03-28 15:55:18 +04:00
bug24696
Update of testing cases for debug mode and MacOS
2014-04-25 14:32:32 +04:00
bug24706
0024706: Solids produced by BOP do not have flag Closed set in shells
2014-03-20 14:10:33 +04:00
bug24731
0024731: Incomplete section of a surface by plane
2014-04-04 16:26:26 +04:00
bug24738
0024738: BRepOffsetAPI_MakePipe algorithm fails on circular path and section (the case where result is part of sphere)
2014-03-28 15:55:20 +04:00
bug24746
0024746: Bug in BRepAlgoAPI
2014-10-30 12:59:35 +03:00
bug24751_1
Increased cpulimits in test cases.
2014-05-23 12:38:03 +04:00
bug24751_2
Increased cpulimits in test cases.
2014-05-23 12:38:03 +04:00
bug24751_3
Adjusting testing cases for Debug mode
2014-09-05 14:02:28 +04:00
bug24751_4
Adjusting testing cases for Debug mode
2014-09-05 14:02:28 +04:00
bug24751_5
Update of testing cases for debug mode and MacOS
2014-04-25 14:32:32 +04:00
bug24758_1
0024758: Sample DRAW scripts for demonstrating sweeping algorithm
2014-03-28 15:55:17 +04:00
bug24758_2
Modified CPU limit in test cases inDebug mode.
2014-06-17 17:18:18 +04:00
bug24764
Increased cpulimits in test cases.
2014-05-23 12:38:03 +04:00
bug24766
0024766: Wrong result for distmini between a TopoDS_Shell and a TopoDS_Edge on version 6.6.0.
2014-04-10 17:53:04 +04:00
bug24798
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug24807
0024807: Exception in ShapeAnalysis_FreeBounds::ConnectEdgesToWires
2014-05-29 15:37:42 +04:00
bug24809
Update of testing cases for debug mode and MacOS
2014-04-25 14:32:32 +04:00
bug24811
0024811: Intersection is insufficient
2014-04-30 13:07:04 +04:00
bug24817
0024817: Can not sew two circular faces in non-manifold mode
2014-07-03 17:11:18 +04:00
bug24823
0024823: Hang up in "bopcheck" command
2014-04-21 19:58:54 +04:00
bug24825_common
0025715: Intersection between cylinders produces excess vertices
2015-01-29 14:01:10 +03:00
bug24825_cut
0025715: Intersection between cylinders produces excess vertices
2015-01-29 14:01:10 +03:00
bug24825_fuse
0025715: Intersection between cylinders produces excess vertices
2015-01-29 14:01:10 +03:00
bug24829
0024829: sprops with precision throws an exception
2014-05-08 11:55:10 +04:00
bug24840
0024880: Invalid result of pipe creation
2014-05-22 17:04:11 +04:00
bug24842_axo
0024842: Crash on change of HLR-algo in top and bottom views of customer's shape
2014-04-24 15:43:34 +04:00
bug24842_back
0024842: Crash on change of HLR-algo in top and bottom views of customer's shape
2014-04-24 15:43:34 +04:00
bug24842_bottom
0024842: Crash on change of HLR-algo in top and bottom views of customer's shape
2014-04-24 15:43:34 +04:00
bug24842_front
0024842: Crash on change of HLR-algo in top and bottom views of customer's shape
2014-04-24 15:43:34 +04:00
bug24842_left
0024842: Crash on change of HLR-algo in top and bottom views of customer's shape
2014-04-24 15:43:34 +04:00
bug24842_right
0024842: Crash on change of HLR-algo in top and bottom views of customer's shape
2014-04-24 15:43:34 +04:00
bug24842_top
0024842: Crash on change of HLR-algo in top and bottom views of customer's shape
2014-04-24 15:43:34 +04:00
bug24844
0024844: Wrong result of Boolean Cut operation.
2014-04-21 19:58:52 +04:00
bug24849_1
0024840: Exception in BRepOffsetAPI_MakePipe
2014-04-24 15:43:26 +04:00
bug24849_2
0024840: Exception in BRepOffsetAPI_MakePipe
2014-04-24 15:43:26 +04:00
bug24851
0024851: Extra vertex is in the result of Boolean Fuse Operation
2014-04-17 16:22:56 +04:00
bug24861
0024861: Extra solid is in the result of General Fuse Operation
2014-04-24 15:43:33 +04:00
bug24879
0024879: Wrong result of General Fuse operation
2014-05-22 18:13:24 +04:00
bug24889
0024889: Geom2dAPI_InterCurveCurve produces result with parameter outside the curve limits
2014-05-29 16:40:04 +04:00
bug24899
0024899: Time of computation of intersection points with help of class BRepIntCurveSurface_Inter is big.
2014-05-15 17:53:14 +04:00
bug24910
0024910: Offset of solid is not created
2014-09-25 15:58:13 +04:00
bug24914
0024914: Micro edge is created during Boolean Operations
2014-05-15 17:46:34 +04:00
bug24915
0025597: Invalid curve on surface in the result of General Fuse operation
2015-01-22 17:02:30 +03:00
bug24920
0024920: Invalid result of Pipe construction
2014-05-29 15:12:29 +04:00
bug24939
0024939: Incorrect result of Fuse operation
2014-06-05 14:24:03 +04:00
bug24946
0024946: Wrong result obtained by Extrema Curve/Curve
2014-05-29 16:23:18 +04:00
bug24949
0024949: Segmentation Violation during pipe creation
2014-08-21 15:51:12 +04:00
bug24950
0024950: Wrong result of Boolean CUT operation
2014-05-29 15:02:07 +04:00
bug24964
0024964: ThruSections crashes the DRAW.exe
2014-06-19 13:27:59 +04:00
bug24973
0024973: Incorrect PCurve construction
2014-06-05 14:22:21 +04:00
bug24981
0025715: Intersection between cylinders produces excess vertices
2015-01-29 14:01:10 +03:00
bug25002
0025002: Wrong result done by Boolean Operation algorithm
2014-06-26 13:04:04 +04:00
bug25004_1
0025004: Extrema curve/curve incorrect result
2014-07-03 17:11:20 +04:00
bug25004_2
0025004: Extrema curve/curve incorrect result
2014-07-03 17:11:20 +04:00
bug25004_3
0025004: Extrema curve/curve incorrect result
2014-07-03 17:11:20 +04:00
bug25019
Adjusting testing cases for debug mode
2014-06-27 15:21:44 +04:00
bug25021
0025021: New option of BRepOffsetAPI_MakeOffset algorithm: open result for open wire
2014-07-31 13:06:44 +04:00
bug25028
0025028: BRepAlgo::ConcatenateWire raises an exception
2014-07-17 11:27:43 +04:00
bug25043
0025043: there is no possibility to know what exactly subshape of source shape has detected problems by BRepAlgoAPI_Check
2014-08-21 15:51:09 +04:00
bug25058
0025058: Regression of performance of BRepExtrema_ExtCC (1000 times slower)
2014-07-17 13:51:44 +04:00
bug25106
0025106: Command "splitshape" does not split attached face by attached edge
2014-08-21 15:51:03 +04:00
bug25111
Update of testing cases after integration fixes for issue 25354 and 25406
2014-10-24 15:35:41 +04:00
bug25124_1
0025124: [Feature request] Removal of continuity checks for offset geometries
2014-12-11 16:38:14 +03:00
bug25124_2
0025124: [Feature request] Removal of continuity checks for offset geometries
2014-12-11 16:38:14 +03:00
bug25124_3
0025124: [Feature request] Removal of continuity checks for offset geometries
2014-12-11 16:38:14 +03:00
bug25124_4
0025124: [Feature request] Removal of continuity checks for offset geometries
2014-12-11 16:38:14 +03:00
bug25124_5
0025124: [Feature request] Removal of continuity checks for offset geometries
2014-12-11 16:38:14 +03:00
bug25124_6
0025124: [Feature request] Removal of continuity checks for offset geometries
2014-12-11 16:38:14 +03:00
bug25124_7
0025124: [Feature request] Removal of continuity checks for offset geometries
2014-12-11 16:38:14 +03:00
bug25127
0025127: Wrong result done by General Fuse algorithm
2014-08-14 12:17:03 +04:00
bug25163
0025163: Wrong result of common operation for faces.
2014-08-21 15:51:08 +04:00
bug25175
0025175: avoid unsafe 3D curve usages
2014-09-18 15:54:42 +04:00
bug25184
0025184: Non-deterministic order of wires in the result of General Fuse
2014-10-30 13:19:31 +03:00
bug25191
0025191: There is no intersection vertex between edges
2014-10-09 14:11:09 +04:00
bug25193
0025193: Bad Intersection curveobtained by Surface/Surface Intersection Algorithm.
2014-12-11 16:36:42 +03:00
bug25199
0025199: Bad tolerance edge generated by blend algorithm
2014-09-04 14:00:41 +04:00
bug25210
0025210: Wrong result of conical projection (BRepProj_Projection algorithm)
2014-09-04 14:28:33 +04:00
bug25224
0025224: The section curve between two cylindrical faces is incomplete
2014-09-11 16:42:08 +04:00
bug25225_1
0025225: Failure of 2d offset algorithm on two wires with arc
2014-09-18 15:01:17 +04:00
bug25225_2
0025225: Failure of 2d offset algorithm on two wires with arc
2014-09-18 15:01:17 +04:00
bug25225_3
0025225: Failure of 2d offset algorithm on two wires with arc
2014-09-18 15:01:17 +04:00
bug25228
0025228: Wrong result of General Fuse operation for an edge and a face.
2014-09-18 14:51:21 +04:00
bug25232_1
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_2
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_3
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_4
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_5
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_6
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_7
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_8
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_9
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_10
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_11
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25232_12
0025232: Functionality to create solids from set of shapes
2014-09-26 17:12:29 +04:00
bug25237
0025237: Wrong result of COMMON operation
2014-09-25 15:58:17 +04:00
bug25242
0025242: Wrong result of cut operation.
2014-09-25 15:58:10 +04:00
bug25243
0025243: BRepFeat_SplitShape algorithm processes incorrect faces with degenerated edges
2014-09-25 15:58:20 +04:00
bug25245_1
0025245: General Fuse operation regression
2014-10-16 15:27:31 +04:00
bug25245_2
0025245: General Fuse operation regression
2014-10-16 15:27:31 +04:00
bug25248
0025248: Curve-Surface intersection algorithm raises exception
2014-09-25 15:58:37 +04:00
bug25263
0025263: Wrong result of cut operation.
2014-09-26 17:15:12 +04:00
bug25270
0025270: OCCT fails to calculate extrema between extruded surface and line
2014-11-06 16:03:16 +03:00
bug25272
0025272: Regression in BRepOffsetAPI_MakePipe: invalid shape is created
2014-10-02 15:36:28 +04:00
bug25285
0025285: Wrong result of General Fuse operation for an edge and a face.
2014-10-02 14:11:16 +04:00
bug25292_11
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_12
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_13
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_14
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_15
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25292_16
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25292_21
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_22
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_23
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_24
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_25
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25292_26
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25292_31
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25292_32
0025597: Invalid curve on surface in the result of General Fuse operation
2015-01-22 17:02:30 +03:00
bug25292_33
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_34
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25292_35
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25292_36
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25298_01
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_02
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_03
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_04
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_05
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_06
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_07
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_08
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_09
0025491: BRepOffsetAPI_MakeOffset algorithm crashes on customer's shape and big value of offset
2014-11-21 15:33:13 +03:00
bug25298_10
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_11
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_12
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_13
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_14
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_15
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25298_16
0025298: New option of BRepOffsetAPI_MakeOffset algorithm: processing of sharp corners in mode GeomAbs_Intersection
2014-10-02 13:36:53 +04:00
bug25319_1
0025319: Bop Common produces strange results with same shapes.
2014-10-16 15:31:11 +04:00
bug25319_2
0025319: Bop Common produces strange results with same shapes.
2014-10-16 15:31:11 +04:00
bug25334_1
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_2
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_3
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_4
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_5
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_6
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_7
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_8
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_9
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_10
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_11
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_12
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_13
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_14
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_15
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_16
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_17
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_18
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_19
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25334_20
0025334: BRepOffsetAPI_MakeOffset algorithm crashes on some customer's shape
2014-10-23 16:20:45 +04:00
bug25337_1
0025337: Regression to version 6.7.1 : boolean operations fail on two planar circular faces lying in the same plane
2014-10-30 13:49:30 +03:00
bug25337_2
0025337: Regression to version 6.7.1 : boolean operations fail on two planar circular faces lying in the same plane
2014-10-30 13:49:30 +03:00
bug25339
0025339: Draw command "mkoffset" does not take into account "intersection" mode on faces
2014-11-28 12:16:07 +03:00
bug25346_1
0025346: Wrong result of General Fuse operation
2015-01-29 12:28:30 +03:00
bug25346_2
0025346: Wrong result of General Fuse operation
2015-01-29 12:28:30 +03:00
bug25354_01
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_02
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_03
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_04
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_05
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_06
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_07
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_08
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_09
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_10
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_11
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_12
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_13
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_14
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_15
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_16
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_17
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_18
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_19
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_20
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_21
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_22
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_23
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_24
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_25
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_26
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_27
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_28
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_29
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_30
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_31
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_32
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_33
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_34
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_35
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_36
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_37
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_38
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_39
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_40
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_41
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_42
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_43
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_44
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_45
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_46
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_47
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_48
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_49
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25354_50
0025354: Intersection operation
2014-11-21 16:12:48 +03:00
bug25368_1
0025368: BREPExtrma DistShapeShape gives wrong result for Sphere and Line
2014-10-30 13:43:04 +03:00
bug25368_2
0025368: BREPExtrma DistShapeShape gives wrong result for Sphere and Line
2014-10-30 13:43:04 +03:00
bug25380
0025380: Intersection curve cannot reach boundary of surface
2014-10-30 12:05:56 +03:00
bug25398
0025398: Modeling Algorithms - Provide shape proximity detector
2014-12-05 12:17:58 +03:00
bug25406_1
0025406: BRepOffset_MakeOffset algorithm fails on the face with two degenerated edges on u-iso null curves
2014-10-23 16:20:56 +04:00
bug25406_2
0025406: BRepOffset_MakeOffset algorithm fails on the face with two degenerated edges on u-iso null curves
2014-10-23 16:20:56 +04:00
bug25408
0025408: Wrong result obtained by General Fuse operator.
2014-10-30 11:43:34 +03:00
bug25410
0025410: Tool for extended check of validity of the curve on the surface
2014-10-30 14:27:29 +03:00
bug25413
0025413: Line-Shape intersection algorithm became 400 times slower
2014-11-05 17:02:58 +03:00
bug25420
0025420: Wrong result obtained by General Fuse operator.
2014-11-07 14:20:40 +03:00
bug25427
0025427: Algorithm of building plane from wire hangs
2014-11-05 16:47:36 +03:00
bug25432
0025432: Wrong result obtained by MakerVolume operator.
2014-11-21 13:44:45 +03:00
bug25449
0025449: Excess vertex in result of General Fuse operation.
2014-11-21 13:51:18 +03:00
bug25450_1
0025450: Common operation returns wrong shape
2014-11-21 13:49:09 +03:00
bug25450_2
0025450: Common operation returns wrong shape
2014-11-21 13:49:09 +03:00
bug25451
0025451: BRepFilletAPI_MakeFillet fails on customer's shape when small radius of fillet is given
2014-11-21 13:56:37 +03:00
bug25453
0025453: SIGSEGV in BRepFill_Sweep::BuildShell
2014-12-11 15:41:12 +03:00
bug25456
0025456: BOPAlgo_CheckerSI reports an error on the given shape
2014-11-21 13:58:36 +03:00
bug25460
0025460: BRepOffsetAPI_ThruSections fails on customer's shape (wing on 11 sections)
2014-11-21 13:47:03 +03:00
bug25465_1
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25465_2
0025465: Excess vertex in the result of CUT operation
2014-12-04 15:46:40 +03:00
bug25470
0025470: Wrong result of COMMON operation
2014-11-28 13:49:46 +03:00
bug25477_1
0025700: Ensuring uniform control of the functionalities of the Boolean operations algorithm at the level of DRAW application
2015-01-15 15:15:47 +03:00
bug25477_2
0025700: Ensuring uniform control of the functionalities of the Boolean operations algorithm at the level of DRAW application
2015-01-15 15:15:47 +03:00
bug25480
0025480: Incorrect result of BRepOffsetAPI_MakePipe
2014-11-21 14:05:24 +03:00
bug25488
0025531: Difference in intersection result on Windows and Linux platform is very significant
2014-12-25 18:06:15 +03:00
bug25491
0025491: BRepOffsetAPI_MakeOffset algorithm crashes on customer's shape and big value of offset
2014-11-21 15:33:13 +03:00
bug25505
0025505: General Fuse produces self-intersection shape
2014-11-21 15:42:31 +03:00
bug25509_1
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25509_2
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25509_3
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25509_4
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25509_5
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25509_6
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25509_7
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25509_8
0025509: Wrong shape considered as valid by checkshape
2014-12-11 16:54:05 +03:00
bug25555
0025555: Wrong result of classification of a point relative to solid
2014-12-11 16:07:29 +03:00
bug25557_1
0025557: Draw command "openoffset" fails on customer's shape with big values of offset
2014-12-11 15:44:43 +03:00
bug25557_2
0025557: Draw command "openoffset" fails on customer's shape with big values of offset
2014-12-11 15:44:43 +03:00
bug25559
0025559: SIGSEGV in TKMath when computing max tolerance of curve on surface
2014-12-11 16:18:07 +03:00
bug25568
0025568: SIGSEGV in thrusections with edge without 3D curve
2014-12-11 16:43:55 +03:00
bug25578
0025582: SIGSEGV in thrusections of circle segments
2015-01-29 12:55:54 +03:00
bug25582
0025582: SIGSEGV in thrusections of circle segments
2015-01-29 12:54:49 +03:00
bug25584
0025584: Wrong result obtained by PerformInfinitePoint Test
2014-12-25 17:53:21 +03:00
bug25591
0025591: Command mkshell produces wrong shell
2014-12-25 16:44:20 +03:00
bug25592
0025592: Bad result of Fillet operation
2014-12-25 16:48:05 +03:00
bug25597
0025597: Invalid curve on surface in the result of General Fuse operation
2015-01-22 17:02:30 +03:00
bug25600
0025600: Wrong result of Boolean FUSE operation
2014-12-25 18:09:43 +03:00
bug25614_common
0025614: Provide API access to the new fuctionalities of Boolean Components
2014-12-25 17:55:50 +03:00
bug25614_cut
0025614: Provide API access to the new fuctionalities of Boolean Components
2014-12-25 17:55:50 +03:00
bug25614_cut21
0025614: Provide API access to the new fuctionalities of Boolean Components
2014-12-25 17:55:50 +03:00
bug25614_fuse
0025614: Provide API access to the new fuctionalities of Boolean Components
2014-12-25 17:55:50 +03:00
bug25614_genfuse
0025614: Provide API access to the new fuctionalities of Boolean Components
2014-12-25 17:55:50 +03:00
bug25614_section
0025614: Provide API access to the new fuctionalities of Boolean Components
2014-12-25 17:55:50 +03:00
bug25625
0025625: Boolean COMMON cannot be built
2014-12-25 18:01:31 +03:00
bug25657
0025657: Bad result of Fillet operation
2015-01-15 15:05:06 +03:00
bug25657_1
0025657: Bad result of Fillet operation
2015-01-15 15:05:06 +03:00
bug25697_1
0025697: Regression : Section obtained after command "bsection" in Test Harness is incorrect.
2015-01-22 17:12:26 +03:00
bug25697_2
0025697: Regression : Section obtained after command "bsection" in Test Harness is incorrect.
2015-01-22 17:12:26 +03:00
bug25704_1
0025704: BRepOffsetAPI_MakeOffset: some customer's cases are processed incorrect
2015-01-29 13:46:54 +03:00
bug25704_2
0025704: BRepOffsetAPI_MakeOffset: some customer's cases are processed incorrect
2015-01-29 13:46:54 +03:00
bug25704_3
0025704: BRepOffsetAPI_MakeOffset: some customer's cases are processed incorrect
2015-01-29 13:46:54 +03:00
bug25704_4
0025704: BRepOffsetAPI_MakeOffset: some customer's cases are processed incorrect
2015-01-29 13:46:54 +03:00
bug25704_5
0025704: BRepOffsetAPI_MakeOffset: some customer's cases are processed incorrect
2015-01-29 13:46:54 +03:00
bug25704_6
0025704: BRepOffsetAPI_MakeOffset: some customer's cases are processed incorrect
2015-01-29 13:46:54 +03:00
bug25708
0025708: GeomAPI_ExtremaCurveCurve does not return all intersection points in 6.8.0
2015-02-05 16:03:36 +03:00
bug25715_1
0025715: Intersection between cylinders produces excess vertices
2015-01-29 14:01:10 +03:00
bug25715_2
0025715: Intersection between cylinders produces excess vertices
2015-01-29 14:01:10 +03:00
bug25715_3
0025715: Intersection between cylinders produces excess vertices
2015-01-29 14:01:10 +03:00
bug25721
0025721: Wrong result obtained by Common operator.
2015-01-22 17:21:30 +03:00
bug25722
0025722: Wrong implementation of SetFuzzyValue method
2015-01-22 17:26:52 +03:00
bug25735
0025735: Wrong solid is considered as valid by checkshape
2015-02-05 12:50:14 +03:00
bug25766
0025766: Exception in BRepAlgo_Section
2015-02-05 16:22:29 +03:00
bug25780
0025780: checkshape raises an exception Standard_OutOfMemory.
2015-02-05 15:41:22 +03:00
bug25788
0025788: Parallelization of the BOP Builder algorithm on second level
2015-02-12 11:58:02 +03:00