0030120: Draw Harness - fixshape command does not heal missing 3D curves

Select3D_SensitiveSet::Matches() has been improved to check if BVH node is fully included by selection volume
and pass this information to overlapsElement()/elementIsInside() interfaces
to avoid expensive partial overlapping checks for individual elements.
Select3D_SensitivePrimitiveArray implements this new interface to improve partial overlapping performance.
Select3D_SensitivePrimitiveArray::Matches() now handles rectangle selection for sub-elements when Elements map is defined.
Added missing const to SelectMgr_BaseFrustum::Overlaps() methods.

AIS_PointCloud has been extended with new selection mode for collecting selected nodes

Draw Harness command vdrawparray has been extended with an option -shape
allowing to create a triangulation from tessellated shape.

.gitignore

@@ -1,14 +1,10 @@
 
 # standard directories for derived files in CASROOT
 /.adm
-/sun
 /lin
 /mac
-/ao1
-/sil
 /wnt
 /doc
-/drv
 /inc
 /work
 
@@ -35,6 +31,8 @@ Release
 *.suo
 *.sdf
 *.opensdf
+*.VC.db
+*.VC.opendb
 *.ipch
 *.aps
 

CMakeLists.txt

@@ -32,7 +32,6 @@ if ("${BUILD_LIBRARY_TYPE}" STREQUAL "Shared")
   endif()
 else()
   unset (BUILD_SHARED_LIBS)
-  message (STATUS "Info: Only 3rdparty's header files are used for building of static OCCT libraries")
   unset (BUILD_SHARED_LIBRARY_NAME_POSTFIX)
 endif()
 
@@ -344,8 +343,11 @@ set (BUILD_ADDITIONAL_TOOLKITS "" CACHE STRING "${BUILD_ADDITIONAL_TOOLKITS_DESC
 separate_arguments (BUILD_ADDITIONAL_TOOLKITS)
 
 if (MSVC)
-  set (BUILD_MODULE_MfcSamples OFF CACHE BOOL "${BUILD_MODULE_MfcSamples_DESCR}")
+  set (BUILD_SAMPLES_MFC OFF CACHE BOOL "${BUILD_SAMPLES_MFC_DESCR}")
 endif()
+set (BUILD_SAMPLES_QT OFF CACHE BOOL "${BUILD_SAMPLES_QT_DESCR}")
+
+set (BUILD_Inspector OFF CACHE BOOL "${BUILD_Inspector_DESCR}")
 
 # uwp sample
 if (MSVC)
@@ -365,9 +367,6 @@ if (WIN32)
   set (USE_D3D OFF CACHE BOOL "${USE_D3D_DESCR}")
 endif()
 
-set (USE_QT_TOOLS OFF CACHE BOOL "${USE_QT_TOOLS_DESCR}")
-set (USE_QT4 ON CACHE BOOL "${USE_QT4}")
-
 # Enable/Disable the floating point exceptions (FPE) during runtime.
 if (NOT BUILD_ENABLE_FPE_SIGNAL_HANDLER)
   set (BUILD_ENABLE_FPE_SIGNAL_HANDLER OFF CACHE BOOL "${BUILD_ENABLE_FPE_SIGNAL_HANDLER_DESCR}" FORCE)
@@ -382,7 +381,7 @@ endif()
 # include the patched or original list of modules
 # list <MODULENAME>_TOOLKITS is created foreach module and contains its toolkits
 # list <OCCT_MODULES> will contain all modules
-OCCT_MODULES_AND_TOOLKITS (OCCT_MODULES)
+OCCT_MODULES_AND_TOOLKITS (MODULES "TOOLKITS" OCCT_MODULES)
 
 foreach (OCCT_MODULE ${OCCT_MODULES})
   BUILD_MODULE (${OCCT_MODULE})
@@ -482,7 +481,6 @@ OCCT_IS_PRODUCT_REQUIRED (CSF_FreeImagePlus CAN_USE_FREEIMAGE)
 OCCT_IS_PRODUCT_REQUIRED (CSF_TclLibs USE_TCL)
 OCCT_IS_PRODUCT_REQUIRED (CSF_FREETYPE USE_FREETYPE)
 OCCT_IS_PRODUCT_REQUIRED (CSF_OpenGlLibs CAN_USE_GLES2)
-OCCT_IS_PRODUCT_REQUIRED (CSF_GL2PS CAN_USE_GL2PS)
 OCCT_IS_PRODUCT_REQUIRED (CSF_TBB CAN_USE_TBB)
 OCCT_IS_PRODUCT_REQUIRED (CSF_EIGEN CAN_USE_EIGEN)
 
@@ -516,6 +514,7 @@ endif()
 # VTK
 if (USE_VTK)
   add_definitions (-DHAVE_VTK)
+  set (OCCT_VTK_USED_TARGETS "" CACHE INTERNAL "" FORCE)
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/vtk")
 else()
   OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_VTK")
@@ -583,7 +582,7 @@ else()
 endif()
 
 # OpenGL ES 2.0
-if (WIN32 AND CAN_USE_GLES2)
+if (CAN_USE_GLES2)
   if ("${CMAKE_SYSTEM_NAME}" STREQUAL "WindowsStore")
     set (USE_GLES2 ON)
   else()
@@ -609,24 +608,6 @@ else()
   OCCT_CHECK_AND_UNSET ("INSTALL_GLES2")
 endif()
 
-# GL2PS
-if (NOT DEFINED ANDROID AND CAN_USE_GL2PS)
-  set (USE_GL2PS OFF CACHE BOOL "${USE_GL2PS_DESCR}")
-
-  if (USE_GL2PS)
-    add_definitions (-DHAVE_GL2PS)
-    OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/gl2ps")
-  else()
-    OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_GL2PS")
-    OCCT_CHECK_AND_UNSET ("INSTALL_GL2PS")
-  endif()
-else()
-  OCCT_CHECK_AND_UNSET ("USE_GL2PS")
-
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_GL2PS")
-  OCCT_CHECK_AND_UNSET ("INSTALL_GL2PS")
-endif()
-
 # TBB
 if (NOT DEFINED ANDROID AND CAN_USE_TBB)
   set (USE_TBB OFF CACHE BOOL "${USE_TBB_DESCR}")
@@ -656,11 +637,13 @@ if (CAN_USE_EIGEN)
     OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/eigen")
   else()
     OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_EIGEN")
+    OCCT_CHECK_AND_UNSET ("INSTALL_EIGEN")
   endif()
 else()
   OCCT_CHECK_AND_UNSET ("USE_EIGEN")
 
   OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_EIGEN")
+  OCCT_CHECK_AND_UNSET ("INSTALL_EIGEN")
 endif()
 
 # Doxygen
@@ -700,11 +683,10 @@ else()
   OCCT_CHECK_AND_UNSET ("3RDPARTY_FLEX_EXECUTABLE")
 endif()
 
+# check all 3rdparty include paths
 string (REGEX REPLACE ";" " " 3RDPARTY_NOT_INCLUDED "${3RDPARTY_NOT_INCLUDED}")
-
-# check all 3rdparty paths
 if (3RDPARTY_NOT_INCLUDED)
-  message (FATAL_ERROR "NOT FOUND: ${3RDPARTY_NOT_INCLUDED}" )
+  message (FATAL_ERROR "Could not find headers of used third-party products: ${3RDPARTY_NOT_INCLUDED}" )
 endif()
 
 if (3RDPARTY_INCLUDE_DIRS)
@@ -717,13 +699,28 @@ endif()
 # include <cmake binary folder>/inc
 include_directories (${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE})
 
-if (3RDPARTY_LIBRARY_DIRS AND BUILD_SHARED_LIBS)
+# check all 3rdparty library paths
+string (REGEX REPLACE ";" " " 3RDPARTY_NO_LIBS "${3RDPARTY_NO_LIBS}")
+if (3RDPARTY_NO_LIBS)
+  if (BUILD_SHARED_LIBS)
+    message (SEND_ERROR "Could not find libraries of used third-party products: ${3RDPARTY_NO_LIBS}" )
+  else()
+    message (WARNING "Could not find libraries of used third-party products: ${3RDPARTY_NO_LIBS}" )
+  endif()
+endif()
+if (3RDPARTY_LIBRARY_DIRS)
   list (REMOVE_DUPLICATES 3RDPARTY_LIBRARY_DIRS)
   string (REGEX REPLACE ";" "\n\t" 3RDPARTY_LIBRARY_DIRS_WITH_ENDS "${3RDPARTY_LIBRARY_DIRS}")
   message (STATUS "Info: The directories of 3rdparty libraries: \n\t${3RDPARTY_LIBRARY_DIRS_WITH_ENDS}")
   link_directories (${3RDPARTY_LIBRARY_DIRS})
 endif()
 
+# report not found 3rdparty dll paths
+string (REGEX REPLACE ";" " " 3RDPARTY_NO_DLLS "${3RDPARTY_NO_DLLS}")
+if (3RDPARTY_NO_DLLS)
+  message (WARNING "Could not find DLLs of used third-party products: ${3RDPARTY_NO_DLLS}" )
+endif()
+
 # build directories
 if (SINGLE_GENERATOR)
   set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib${BIN_LETTER}")
@@ -773,31 +770,33 @@ else()
   set (SCRIPT_EXT sh)
 endif()
 
+if (BUILD_Inspector OR BUILD_SAMPLES_QT)
+  # check qt 3rdparty path
+  add_definitions (-DHAVE_QT)
+  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt")
+  message (STATUS "Info: Qt is used by OCCT")
+else()
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_QT")
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_TQTMALLOC")
+  OCCT_CHECK_AND_UNSET ("INSTALL_QT")
+endif()
+
 # OCCT tools
 # include the patched or original list of tools
 # list <TOOLNAME>_TOOLKITS is created foreach tool and contains its toolkits
 # list <OCCT_TOOLS> will contain all tools
-if (NOT USE_QT_TOOLS)
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_QT")
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_TQTMALLOC")
-  OCCT_CHECK_AND_UNSET ("INSTALL_QT")
-else()
-  OCCT_TOOLS_AND_TOOLKITS (OCCT_TOOLS)
+if (BUILD_Inspector)
+  add_definitions (-DHAVE_Inspector)
+
+  OCCT_MODULES_AND_TOOLKITS (TOOLS "TOOL_TOOLKITS" OCCT_TOOLS)
   foreach (OCCT_TOOL ${OCCT_TOOLS})
     list (APPEND BUILD_TOOL_TOOLKITS ${${OCCT_TOOL}_TOOL_TOOLKITS})
   endforeach()
 
-  # collect all the headers to <binary dir>/inc folder
+  # collect all the headers to <binary dir>/inc/inspector folder
   string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-  message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/tools/inc ...")
-  COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}" "${BUILD_TOOL_TOOLKITS}" "${CMAKE_SOURCE_DIR}/tools" "tools")
-  include_directories (${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/tools)
-
-
-  # check qt 3rdparty path
-  add_definitions (-DHAVE_QT)
-  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt5")
-  message (STATUS "Info: Qt is used by OCCT")
+  message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/inc/inspector ...")
+  COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOL_TOOLKITS}" "${CMAKE_SOURCE_DIR}/tools" "${INSTALL_DIR_INCLUDE}/inspector")
 endif()
 
 # OCCT samples
@@ -872,6 +871,22 @@ else()
   OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
 endif()
 
+if (WIN32)
+  set (THIRDPARTY_DIR_REPLACE "%THIRDPARTY_DIR%")
+else()
+  set (THIRDPARTY_DIR_REPLACE "\${THIRDPARTY_DIR}")
+endif()
+get_cmake_property(USED_3RDPARTY_CACHE_VARIABLES VARIABLES)
+string (REGEX MATCHALL "(^|;)USED_3RDPARTY_[^;]+_DIR[^;]*" USED_3RDPARTY_CACHE_VARIABLES "${USED_3RDPARTY_CACHE_VARIABLES}")
+file (TO_CMAKE_PATH "${3RDPARTY_DIR}" 3RDPARTY_DIR)
+foreach (USED_3RDPARTY_CACHE_VARIABLE ${USED_3RDPARTY_CACHE_VARIABLES})
+   file (TO_CMAKE_PATH "${${USED_3RDPARTY_CACHE_VARIABLE}}" ${USED_3RDPARTY_CACHE_VARIABLE})
+   string (REPLACE "${3RDPARTY_DIR}" "${THIRDPARTY_DIR_REPLACE}" ${USED_3RDPARTY_CACHE_VARIABLE} "${${USED_3RDPARTY_CACHE_VARIABLE}}")
+   if (NOT WIN32)
+     string (REGEX REPLACE ";" ":" ${USED_3RDPARTY_CACHE_VARIABLE} "${${USED_3RDPARTY_CACHE_VARIABLE}}")
+   endif()
+endforeach()
+
 # write current custom.bat/sh (for install directory)
 set (SUB_CUSTOM_BUILD_NAME "custom_${COMPILER}_${COMPILER_BITNESS}.install.${SCRIPT_EXT}")
 OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${SUB_CUSTOM_BUILD_NAME}" "${SUB_CUSTOM_NAME}" "${INSTALL_DIR_SCRIPT}")
@@ -879,9 +894,9 @@ OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${S
 # write current custom.bat/sh (for build directory)
 OCCT_CONFIGURE ("adm/templates/custom.build.${SCRIPT_EXT}.in" "${SUB_CUSTOM_NAME}")
 
-if (BUILD_MODULE_MfcSamples)
-  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.bat" "${INSTALL_DIR_SCRIPT}")
-  OCCT_COPY_FILE_OR_DIR    ("adm/templates/sample.bat" "${CMAKE_BINARY_DIR}")
+if (BUILD_SAMPLES_MFC OR BUILD_SAMPLES_QT)
+  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
+  OCCT_COPY_FILE_OR_DIR    ("adm/templates/sample.${SCRIPT_EXT}" "${CMAKE_BINARY_DIR}")
 endif()
 
 # env script for draw in building environment
@@ -907,6 +922,15 @@ foreach(RESOURCE ${RESOURCES})
   endif()
 endforeach()
 
+if (BUILD_SAMPLES_QT)
+  FILE_TO_LIST ("adm/SAMPLES_RESOURCES" SAMPLES_RESOURCES)
+  foreach(RESOURCE ${SAMPLES_RESOURCES})
+    OCCT_INSTALL_FILE_OR_DIR ("samples/${RESOURCE}" "${INSTALL_DIR_RESOURCE}/samples")
+    #message("Copy Sample resources: samples/${RESOURCE} into ${INSTALL_DIR_RESOURCE}/samples")
+  endforeach()
+endif()
+
+
 # patch installed DrawDefault file if BUILD_SHARED_LIBRARY_NAME_POSTFIX is changed
 if (NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
   OCCT_UPDATE_DRAW_DEFAULT_FILE()
@@ -951,9 +975,11 @@ endif()
 
 message (STATUS "Info: \(${CURRENT_TIME}\) OCCT toolkits processed")
 # samples do not support patch usage
-if (BUILD_MODULE_MfcSamples)
+if (BUILD_SAMPLES_MFC OR BUILD_SAMPLES_QT)
   set (OCCT_ROOT ${CMAKE_SOURCE_DIR})
+endif()
 
+if (BUILD_SAMPLES_MFC)
   set (MFC_STANDARD_SAMPLES_DIR ${OCCT_ROOT}/samples/mfc/standard)
   set (COMMON_WINMAIN_FILE      ${MFC_STANDARD_SAMPLES_DIR}/Common/Winmain.cpp)
 
@@ -972,24 +998,50 @@ if (BUILD_MODULE_MfcSamples)
   message (STATUS "Info: \(${CURRENT_TIME}\) MFC Sample projects added")
 endif()
 
+OCCT_MODULES_AND_TOOLKITS (SAMPLES "SAMPLES_TOOLKITS" OCCT_SAMPLES)
+
+if (BUILD_Inspector OR BUILD_SAMPLES_QT)
+  if (BUILD_SAMPLES_QT)
+    if (NOT Qt5_FOUND OR "${Qt5Gui_EGL_INCLUDE_DIRS}" STREQUAL "" OR NOT WIN32)
+      list (REMOVE_ITEM qt_SAMPLES_TOOLKITS AndroidQt)
+      message (STATUS "Info: AndroidQt sample excluded due to OS is not Windows or Qt is configured without ANGLE")
+    endif()
+  else()
+    list (REMOVE_ITEM OCCT_SAMPLES qt)
+    message (STATUS "Info: qt samples excluded due to BUILD_SAMPLES_QT is disabled")
+  endif()
+
+  foreach (OCCT_SAMPLE ${OCCT_SAMPLES})
+    list (APPEND BUILD_SAMPLE_TOOLKITS ${${OCCT_SAMPLE}_SAMPLES_TOOLKITS})
+
+    # collect all the headers to <binary dir>/inc/samples folder
+    string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
+    message (STATUS "Info: \(${CURRENT_TIME}\) ${OCCT_SAMPLE} Sample projects added")
+
+    # include patched toolkit projects or original ones
+    foreach (BUILD_SAMPLE_TOOLKIT ${${OCCT_SAMPLE}_SAMPLES_TOOLKITS})
+      OCCT_ADD_SUBDIRECTORY ("samples/${OCCT_SAMPLE}/${BUILD_SAMPLE_TOOLKIT}")
+    endforeach()
+  endforeach()
+endif()
+
 if (BUILD_MODULE_UwpSample)
   add_subdirectory(samples/xaml)
 endif()
 
 if (BUILD_TOOL_TOOLKITS)
   # copy tinspector script to install script folder
-  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/dfbrowser.${SCRIPT_EXT}")
-    install (FILES "${BUILD_PATCH}/adm/templates/dfbrowser.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/inspector.${SCRIPT_EXT}")
+    install (FILES "${BUILD_PATCH}/adm/templates/inspector.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
             PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
   else()
-    install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/dfbrowser.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
+    install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/inspector.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
             PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
   endif()
 
-  set (BUILD_SAMPLE_TOOLKITS TInspectorEXE)
-  foreach (BUILD_SAMPLE_TOOL_TOOLKIT ${BUILD_SAMPLE_TOOLKITS})
-    OCCT_ADD_SUBDIRECTORY ("samples/tools/${BUILD_SAMPLE_TOOL_TOOLKIT}")
-  endforeach()
+  set (OpenCASCADE_BINARY_DIR "${INSTALL_DIR}/${INSTALL_DIR_BIN}")
+  # patch TInspectorEXE
+  OCCT_CONFIGURE ("adm/templates/TInspectorEXE.vcxproj.user.in" "${CMAKE_BINARY_DIR}/tools/TInspectorEXE/TInspectorEXE.vcxproj.user")
 endif()
 
 # Prepare variables for configuration of OpenCASCADE cmake config file
@@ -1075,10 +1127,6 @@ if (APPLE)
   set (SET_OpenCASCADE_WITH_GLX "set (OpenCASCADE_WITH_GLX       ${USE_GLX})")
 endif()
 
-if (NOT SINGLE_GENERATOR)
-  OCCT_INSERT_CODE_FOR_TARGET()
-endif()
-
 # Configure and install cmake config file
 configure_file("${CMAKE_SOURCE_DIR}/adm/templates/OpenCASCADEConfig.cmake.in" "OpenCASCADEConfig.cmake" @ONLY)
 install(FILES "${CMAKE_BINARY_DIR}/OpenCASCADEConfig.cmake" DESTINATION  "${INSTALL_DIR_CMAKE}")

adm/CMPLRS

@@ -1,17 +1,17 @@
 wnt WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)
 lin WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)
 
-wnt cmplrs_cxx f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_cxx b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_cxx f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_cxx b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
 wnt cmplrs_cxx Aspect (wnt cmplrs_cxx b) -D_AFXDLL
 wnt cmplrs_cxx (wnt cmplrs_cxx b) -D_AFXDLL -D_AFXDLL
 
-wnt cmplrs_c f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_c b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_c f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_c b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
 wnt cmplrs_c NIS (wnt cmplrs_c b) -DSILGL -DSILGL_VRS=50
 
-lin cmplrs_cxx f -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
-lin cmplrs_cxx b -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+lin cmplrs_cxx f -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+lin cmplrs_cxx b -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
 
 lin cmplrs_c f -D_GNU_SOURCE=1 -fexceptions
 lin cmplrs_c b -D_GNU_SOURCE=1 -fexceptions

adm/SAMPLES

@@ -0,0 +1 @@
+qt AndroidQt FuncDemo IESample Tutorial

adm/SAMPLES_RESOURCES

@@ -0,0 +1,2 @@
+qt/Common/res/
+qt/Tutorial/res/

adm/TOOLS

@@ -1,4 +1,4 @@
 TModelingData TKShapeView
 TVisualization TKView TKVInspector
 TApplicationFramework TKTreeModel TKTInspectorAPI TKDFBrowser
-TTool TKTInspector TKToolsDraw
+TTool TKTInspector TKToolsDraw TInspectorEXE

adm/UDLIST

@@ -433,4 +433,5 @@ n IVtkDraw
 t TKIVtkDraw
 n Geom2dEvaluator
 t TKVCAF
-n XCAFView
+n XCAFView
+n XCAFNoteObjects

adm/cmake/3rdparty_macro.cmake

@@ -117,7 +117,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
 
   foreach (LIBRARY_NAME ${${LIBRARY_CSF_NAME}})
     string (REPLACE "." "" LIBRARY_NAME_SUFFIX "${LIBRARY_NAME}")
-    if (BUILD_SHARED_LIBS)
+#    if (BUILD_SHARED_LIBS)
       # library
       if (NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}}")
         set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
@@ -167,7 +167,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
       if (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX} AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX}}")
         list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX}}")
       else()
-        list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX})
+        list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX})
 
         set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} "" CACHE FILEPATH "The path to ${PRODUCT_NAME} library \"${LIBRARY_NAME}\"" FORCE)
       endif()
@@ -213,7 +213,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
         if (3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX} OR EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX}}")
           list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX}}")
         else()
-          list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX})
+          list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX})
         endif()
       endif()
 
@@ -277,26 +277,6 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
             endif()
           endif()
 
-          if("${PRODUCT_NAME}" STREQUAL "GL2PS")
-            get_filename_component(GL2PSLIB ${3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}} NAME)
-
-            if (SINGLE_GENERATOR)
-              install (FILES "${ABS_PATH}" DESTINATION "${INSTALL_DIR_LIB}" RENAME ${GL2PSLIB}.1)
-            else()
-              install (FILES "${ABS_PATH}"
-                       CONFIGURATIONS Release
-                       DESTINATION "${INSTALL_DIR_LIB}"
-                       RENAME ${GL2PSLIB}.1)
-              install (FILES "${ABS_PATH}"
-                       CONFIGURATIONS RelWithDebInfo
-                       DESTINATION "${INSTALL_DIR_LIB}i"
-                       RENAME ${GL2PSLIB}.1)
-              install (FILES "${ABS_PATH}"
-                       CONFIGURATIONS Debug
-                       DESTINATION "${INSTALL_DIR_LIB}d"
-                       RENAME ${GL2PSLIB}.1)
-            endif()
-          endif()
         endif()
       else()
         # the library directory for using by the executable
@@ -311,7 +291,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
       endif()
 
       mark_as_advanced (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} 3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX})
-    endif()
+#    endif()
   endforeach()
 endmacro()
 

adm/cmake/eigen.cmake

@@ -1,5 +1,9 @@
 # eigen
 
+if (NOT DEFINED INSTALL_EIGEN)
+  set (INSTALL_EIGEN OFF CACHE BOOL "${INSTALL_EIGEN_DESCR}")
+endif()
+
 # eigen directory
 if (NOT DEFINED 3RDPARTY_EIGEN_DIR)
   set (3RDPARTY_EIGEN_DIR "" CACHE PATH "The directory containing eigen")
@@ -61,6 +65,18 @@ endif()
 
 if (3RDPARTY_EIGEN_INCLUDE_DIR AND EXISTS "${3RDPARTY_EIGEN_INCLUDE_DIR}")
   list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_EIGEN_INCLUDE_DIR}")
+
+  # Install header files
+  if (INSTALL_EIGEN)
+    file(GLOB EIGEN_SUBDIRS "${3RDPARTY_EIGEN_INCLUDE_DIR}/*")
+    foreach(SUBDIR ${EIGEN_SUBDIRS})
+      if(IS_DIRECTORY "${SUBDIR}")
+        install (DIRECTORY "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
+      else()
+        install (FILES "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
+      endif()
+    endforeach()
+  endif()
 else()
   list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_EIGEN_INCLUDE_DIR)
 

adm/cmake/ffmpeg.cmake

@@ -8,7 +8,7 @@ if (NOT DEFINED 3RDPARTY_FFMPEG_DIR)
   set (3RDPARTY_FFMPEG_DIR "" CACHE PATH "The directory containing FFmpeg")
 endif()
 
-# include occt macros. compiler_bitness, os_wiht_bit, compiler
+# include occt macros. compiler_bitness, os_with_bit, compiler
 OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
 
 # specify FFMPEG folder in connection with 3RDPARTY_DIR
@@ -27,49 +27,52 @@ if (NOT DEFINED 3RDPARTY_FFMPEG_INCLUDE_DIR)
   set (3RDPARTY_FFMPEG_INCLUDE_DIR  "" CACHE PATH "the path of headers directory")
 endif()
 
-if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY OR NOT 3RDPARTY_FFMPEG_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR}")
-  set (3RDPARTY_FFMPEG_LIBRARY               "" CACHE FILEPATH "FFmpeg framework" FORCE)
-endif()
-
-if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY_DIR)
-  set (3RDPARTY_FFMPEG_LIBRARY_DIR           "" CACHE PATH "The directory containing FFmpeg framework")
-endif()
-
-if (WIN32)
-  if (NOT DEFINED 3RDPARTY_FFMPEG_DLL OR NOT 3RDPARTY_FFMPEG_DLL_DIR OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL_DIR}")
-    set (3RDPARTY_FFMPEG_DLL                 "" CACHE FILEPATH "FFmpeg shared libraries" FORCE)
+separate_arguments (CSF_FFmpeg)
+foreach (LIBRARY_NAME ${CSF_FFmpeg})
+  if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} OR NOT 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
+    set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}               "" CACHE FILEPATH "FFmpeg framework (${LIBRARY_NAME})" FORCE)
   endif()
-endif()
 
-if (WIN32)
-  if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_DIR)
-    set (3RDPARTY_FFMPEG_DLL_DIR               "" CACHE PATH "The directory containing FFmpeg shared libraries")
-  endif()
-endif()
-
-# check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_${PRODUCT_NAME}_DIR
-if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
-  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_INCLUDE_DIR PATH "the path to FFmpeg")
-  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY FILEPATH "the path to FFmpeg framework")
-
-  if (3RDPARTY_FFMPEG_LIBRARY AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY}")
-    get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY}" PATH)
-    set (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY_DIR}" CACHE PATH "The directory containing FFmpeg libraries" FORCE)
-  else()
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY_DIR PATH "The directory containing FFmpeg libraries")
+  if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})
+    set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}           "" CACHE PATH "The directory containing FFmpeg framework (${LIBRARY_NAME})")
   endif()
 
   if (WIN32)
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL FILEPATH "the path to FFmpeg shared libraries")
-
-    if (3RDPARTY_FFMPEG_DLL AND EXISTS "${3RDPARTY_FFMPEG_DLL}")
-      get_filename_component (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL}" PATH)
-      set (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL_DIR}" CACHE PATH "The directory containing FFmpeg shared libraries" FORCE)
-    else()
-      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL_DIR PATH "The directory containing FFmpeg shared libraries")
+    if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} OR NOT 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
+      set (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}                 "" CACHE FILEPATH "FFmpeg shared libraries (${LIBRARY_NAME})" FORCE)
     endif()
   endif()
-endif()
+
+  if (WIN32)
+    if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
+      set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}               "" CACHE PATH "The directory containing FFmpeg shared libraries (${LIBRARY_NAME})")
+    endif()
+  endif()
+
+  # check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_${PRODUCT_NAME}_DIR
+  if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_INCLUDE_DIR PATH "the path to FFmpeg")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} FILEPATH "the path to FFmpeg framework (${LIBRARY_NAME})")
+
+    if (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}")
+      get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}" PATH)
+      set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
+    else()
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} PATH "The directory containing FFmpeg library (${LIBRARY_NAME})")
+    endif()
+
+    if (WIN32)
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} FILEPATH "the path to FFmpeg shared library (${LIBRARY_NAME})")
+
+      if (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}")
+        get_filename_component (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" PATH)
+        set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})" FORCE)
+      else()
+        CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})")
+      endif()
+    endif()
+  endif()
+endforeach()
 
 # header
 if (NOT 3RDPARTY_FFMPEG_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_FFMPEG_INCLUDE_DIR}")
@@ -99,130 +102,132 @@ else()
   set (3RDPARTY_FFMPEG_INCLUDE_DIR "" CACHE FILEPATH "the path to avutil.h" FORCE)
 endif()
 
-# library
-if (NOT 3RDPARTY_FFMPEG_LIBRARY OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY}")
-  set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
+# libraries
+foreach (LIBRARY_NAME ${CSF_FFmpeg})
+  if (NOT 3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}")
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
 
-  set (FFMPEG_PATH_SUFFIXES lib)
-  if (ANDROID)
-    set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} libs/${ANDROID_ABI})
-  elseif(APPLE)
-    set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} Frameworks)
-  endif()
+    set (FFMPEG_PATH_SUFFIXES lib)
+    if (ANDROID)
+      set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} libs/${ANDROID_ABI})
+    elseif(APPLE)
+      set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} Frameworks)
+    endif()
 
-  # set 3RDPARTY_FFMPEG_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FFMPEG_LIBRARY
-  set (3RDPARTY_FFMPEG_LIBRARY "3RDPARTY_FFMPEG_LIBRARY-NOTFOUND" CACHE FILEPATH "The path to FFmpeg library" FORCE)
+    # set 3RDPARTY_FFMPEG_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FFMPEG_LIBRARY
+    set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} "3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}-NOTFOUND" CACHE FILEPATH "The path to FFmpeg library (${LIBRARY_NAME})" FORCE)
 
-  if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
-    find_library (3RDPARTY_FFMPEG_LIBRARY NAMES avutil
-                  PATHS "${3RDPARTY_FFMPEG_LIBRARY_DIR}" "${3RDPARTY_FFMPEG_DIR}"
-                  PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
-                  CMAKE_FIND_ROOT_PATH_BOTH
-                  NO_DEFAULT_PATH)
-  else()
-    find_library (3RDPARTY_FFMPEG_LIBRARY NAMES avutil
-                  PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
-                  CMAKE_FIND_ROOT_PATH_BOTH)
-  endif()
-
-  if (3RDPARTY_FFMPEG_LIBRARY AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY}")
-    get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY}" PATH)
-    set (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY_DIR}" CACHE PATH "The directory containing FFmpeg library" FORCE)
-  else()
-    set (3RDPARTY_FFMPEG_LIBRARY_DIR "" CACHE PATH "The directory containing FFmpeg library" FORCE)
-  endif()
-endif()
-
-if (3RDPARTY_FFMPEG_LIBRARY_DIR AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR}")
-  list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FFMPEG_LIBRARY_DIR}")
-else()
-  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_LIBRARY_DIR)
-
-  set (3RDPARTY_FFMPEG_LIBRARY "" CACHE FILEPATH "The path to FFmpeg library" FORCE)
-endif()
-
-# shared library
-if (WIN32)
-  if (NOT 3RDPARTY_FFMPEG_DLL OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL}")
-
-    set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
-    set (3RDPARTY_FFMPEG_DLL "3RDPARTY_FFMPEG_DLL-NOTFOUND" CACHE FILEPATH "The path to FFmpeg shared library" FORCE)
-
-    # find FFmpeg shared library
-    file (GLOB 3RDPARTY_FFMPEG_DLL "${3RDPARTY_FFMPEG_DIR}/bin/avutil[-][0-9]*")
-
-    if (3RDPARTY_FFMPEG_DLL AND EXISTS "${3RDPARTY_FFMPEG_DLL}")
-      set (3RDPARTY_FFMPEG_DLL "${3RDPARTY_FFMPEG_DLL}" CACHE FILEPATH "FFmpeg shared library" FORCE)
-      get_filename_component (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL}" PATH)
-      set (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL_DIR}" CACHE PATH "The directory containing FFmpeg library" FORCE)
+    if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
+      find_library (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} NAMES ${LIBRARY_NAME}
+                    PATHS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" "${3RDPARTY_FFMPEG_DIR}"
+                    PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
+                    CMAKE_FIND_ROOT_PATH_BOTH
+                    NO_DEFAULT_PATH)
     else()
-      set (3RDPARTY_FFMPEG_DLL_DIR "" CACHE PATH "The directory containing FFmpeg shared library" FORCE)
+      find_library (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} NAMES ${LIBRARY_NAME}
+                    PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
+                    CMAKE_FIND_ROOT_PATH_BOTH)
+    endif()
+
+    if (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}")
+      get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}" PATH)
+      set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
+    else()
+      set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
     endif()
   endif()
 
-  if (3RDPARTY_FFMPEG_DLL_DIR OR EXISTS "${3RDPARTY_FFMPEG_DLL_DIR}")
-    list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FFMPEG_DLL_DIR}")
+  if (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
+    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
   else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_DLL_DIR)
+    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})
+
+    set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} "" CACHE FILEPATH "The path to FFmpeg library (${LIBRARY_NAME})" FORCE)
   endif()
-endif()
-
-# install instructions
-if (INSTALL_FFMPEG)
-  OCCT_MAKE_OS_WITH_BITNESS()
-  OCCT_MAKE_COMPILER_SHORT_NAME()
 
+  # shared library
   if (WIN32)
-    if (DEFINED INSTALL_BIN_DIR)
-      install (FILES "${3RDPARTY_FFMPEG_DLL}" DESTINATION "${INSTALL_BIN_DIR}")
-    else()
-      install (FILES "${3RDPARTY_FFMPEG_DLL}"
-               CONFIGURATIONS Release
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-      install (FILES "${3RDPARTY_FFMPEG_DLL}"
-               CONFIGURATIONS RelWithDebInfo
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-      install (FILES "${3RDPARTY_FFMPEG_DLL}"
-               CONFIGURATIONS Debug
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
-    endif()
-  else()
-    get_filename_component(3RDPARTY_FFMPEG_LIBRARY_ABS ${3RDPARTY_FFMPEG_LIBRARY} REALPATH)
-    get_filename_component(3RDPARTY_FFMPEG_LIBRARY_NAME ${3RDPARTY_FFMPEG_LIBRARY} NAME)
+    if (NOT 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}")
 
-    if (DEFINED INSTALL_LIB_DIR)
-      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-               DESTINATION "${INSTALL_LIB_DIR}"
-               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+      set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
+      set (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} "3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}-NOTFOUND" CACHE FILEPATH "The path to FFmpeg shared library (${LIBRARY_NAME})" FORCE)
+
+      # find FFmpeg shared library
+      file (GLOB 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DIR}/bin/${LIBRARY_NAME}[-][0-9]*")
+
+      if (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}")
+        set (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" CACHE FILEPATH "FFmpeg shared library (${LIBRARY_NAME})" FORCE)
+        get_filename_component (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" PATH)
+        set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
+      else()
+        set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "" CACHE PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})" FORCE)
+      endif()
+    endif()
+
+    if (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} OR EXISTS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
+      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
     else()
-      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-               CONFIGURATIONS Release
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
-      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-               CONFIGURATIONS RelWithDebInfo
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
-      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-               CONFIGURATIONS Debug
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
     endif()
   endif()
 
-  set (USED_3RDPARTY_FFMPEG_DIR "")
-else()
-  # the library directory for using by the executable
-  if (WIN32)
-    set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_DLL_DIR})
+  # install instructions
+  if (INSTALL_FFMPEG)
+    OCCT_MAKE_OS_WITH_BITNESS()
+    OCCT_MAKE_COMPILER_SHORT_NAME()
+
+    if (WIN32)
+      if (DEFINED INSTALL_BIN_DIR)
+        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" DESTINATION "${INSTALL_BIN_DIR}")
+      else()
+        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}"
+                 CONFIGURATIONS Release
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
+        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}"
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
+        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}"
+                 CONFIGURATIONS Debug
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+      endif()
+    else()
+      get_filename_component(3RDPARTY_FFMPEG_LIBRARY_ABS ${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}} REALPATH)
+      get_filename_component(3RDPARTY_FFMPEG_LIBRARY_NAME ${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}} NAME)
+
+      if (DEFINED INSTALL_LIB_DIR)
+        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+                 DESTINATION "${INSTALL_LIB_DIR}"
+                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+      else()
+        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+                 CONFIGURATIONS Release
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
+                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
+                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+                 CONFIGURATIONS Debug
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
+                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+      endif()
+    endif()
+
+    set (USED_3RDPARTY_FFMPEG_DIR "")
   else()
-    set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_LIBRARY_DIR})
+    # the library directory for using by the executable
+    if (WIN32)
+      set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}})
+    else()
+      set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}})
+    endif()
   endif()
-endif()
+
+  mark_as_advanced (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME})
+endforeach()
 
 # unset all redundant variables
 OCCT_CHECK_AND_UNSET (FFMPEG_INCLUDE_DIRS)
 OCCT_CHECK_AND_UNSET (FFMPEG_LIBRARY_DIRS)
 OCCT_CHECK_AND_UNSET (FFMPEG_DIR)
-
-mark_as_advanced (3RDPARTY_FFMPEG_LIBRARY 3RDPARTY_FFMPEG_DLL)

adm/cmake/freetype.cmake

@@ -218,7 +218,7 @@ else()
 endif()
 
 # freetype library
-if (BUILD_SHARED_LIBS)
+#if (BUILD_SHARED_LIBS)
   if (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
     set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
 
@@ -253,7 +253,7 @@ if (BUILD_SHARED_LIBS)
   if (3RDPARTY_FREETYPE_LIBRARY_DIR AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_FREETYPE_LIBRARY_DIR)
 
     set (3RDPARTY_FREETYPE_LIBRARY "" CACHE FILEPATH "The path to freetype library" FORCE)
   endif()
@@ -290,7 +290,7 @@ if (BUILD_SHARED_LIBS)
     if (3RDPARTY_FREETYPE_DLL_DIR OR EXISTS "${3RDPARTY_FREETYPE_DLL_DIR}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FREETYPE_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_DLL_DIR)
+      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_FREETYPE_DLL_DIR)
     endif()
   endif()
 
@@ -345,7 +345,7 @@ if (BUILD_SHARED_LIBS)
       set (USED_3RDPARTY_FREETYPE_DIR ${3RDPARTY_FREETYPE_LIBRARY_DIR})
     endif()
   endif()
-endif()
+#endif()
 
 # unset all redundant variables
 OCCT_CHECK_AND_UNSET(FREETYPE_INCLUDE_DIR_ft2build)

adm/cmake/gl2ps.cmake

@@ -1,3 +0,0 @@
-#GL2PS
-
-THIRDPARTY_PRODUCT("GL2PS" "gl2ps.h" "CSF_GL2PS" "d")

adm/cmake/occt_csf.cmake

@@ -35,7 +35,11 @@ endif()
 if (USE_FREEIMAGE)
   set (CSF_FreeImagePlus "freeimage")
 else()
-  set (CSF_FreeImagePlus)
+  if (WIN32)
+    set (CSF_FreeImagePlus "windowscodecs")
+  else()
+    set (CSF_FreeImagePlus)
+  endif()
 endif()
 
 # TCL/TK
@@ -54,21 +58,13 @@ if (USE_TCL)
   endif()
 endif()
 
-# GL2PS
-if (NOT DEFINED ANDROID)
-  if (USE_GL2PS)
-    set (CSF_GL2PS "gl2ps")
-  else()
-    set (CSF_GL2PS)
-  endif()
-endif()
-
 if (WIN32)
   set (CSF_advapi32      "advapi32.lib")
   set (CSF_gdi32         "gdi32.lib")
   set (CSF_user32        "user32.lib")
   set (CSF_wsock32       "wsock32.lib")
   set (CSF_psapi         "Psapi.lib")
+  set (CSF_d3d9          "D3D9.lib")
   if ("${CMAKE_SYSTEM_NAME}" STREQUAL "WindowsStore" OR USE_GLES2)
     set (CSF_OpenGlLibs  "libEGL libGLESv2")
   else()
@@ -81,7 +77,7 @@ if (WIN32)
     set (CSF_objc        "objc")
 
     # frameworks
-    find_library (Appkit_LIB NAMES Appkit)
+    find_library (Appkit_LIB NAMES AppKit)
     set (CSF_Appkit ${Appkit_LIB})
 
     find_library (IOKit_LIB NAMES IOKit)
@@ -105,7 +101,11 @@ if (WIN32)
     set (CSF_OpenGlLibs  "EGL GLESv2")
   elseif (UNIX)
     set (CSF_ThreadLibs  "pthread rt stdc++")
-    set (CSF_OpenGlLibs  "GL")
+    if (USE_GLES2)
+      set (CSF_OpenGlLibs  "EGL GLESv2")
+    else()
+      set (CSF_OpenGlLibs  "GL")
+    endif()
     set (CSF_XwLibs      "X11 Xext Xmu Xi")
     set (CSF_dl          "dl")
   endif()

adm/cmake/occt_defs_flags.cmake

@@ -16,16 +16,15 @@ if (MSVC)
   set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   /fp:precise")
 endif()
 
-# set compiler short name and choose SSE2 option for appropriate MSVC compilers
-# ONLY for 32-bit
+# add SSE2 option for old MSVC compilers (VS 2005 - 2010, 32 bit only)
 if (NOT CMAKE_SIZEOF_VOID_P EQUAL 8)
-  if (MSVC80 OR MSVC90 OR MSVC10)
+  if (MSVC AND ((MSVC_VERSION EQUAL 1400) OR (MSVC_VERSION EQUAL 1500) OR (MSVC_VERSION EQUAL 1600)))
     set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:SSE2")
     set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   /arch:SSE2")
   endif()
 endif()
 
-if (WIN32)
+if (MSVC)
   add_definitions (-D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE)
 else()
   set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fexceptions -fPIC")
@@ -82,13 +81,18 @@ if (IS_DEBUG_C)
   string (REGEX REPLACE "-DDEBUG" "" CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG}")
 endif()
 # enable parallel compilation on MSVC 9 and above
-if (MSVC AND NOT MSVC70 AND NOT MSVC80)
+if (MSVC AND (MSVC_VERSION GREATER 1400))
   set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP")
 endif()
 
 # generate a single response file which enlist all of the object files
-SET(CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS 1)
-SET(CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS 1)
+if (NOT DEFINED CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS)
+  SET(CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS 1)
+endif()
+if (NOT DEFINED CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS)
+  SET(CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS 1)
+endif()
+
 # increase compiler warnings level (-W4 for MSVC, -Wextra for GCC)
 if (MSVC)
   if (CMAKE_CXX_FLAGS MATCHES "/W[0-4]")

adm/cmake/occt_macros.cmake

@@ -60,25 +60,27 @@ endmacro()
 # COMPILER variable
 macro (OCCT_MAKE_COMPILER_SHORT_NAME)
   if (MSVC)
-    if (MSVC70)
+    if ((MSVC_VERSION EQUAL 1300) OR (MSVC_VERSION EQUAL 1310))
       set (COMPILER vc7)
-    elseif (MSVC80)
+    elseif (MSVC_VERSION EQUAL 1400)
       set (COMPILER vc8)
-    elseif (MSVC90)
+    elseif (MSVC_VERSION EQUAL 1500)
       set (COMPILER vc9)
-    elseif (MSVC10)
+    elseif (MSVC_VERSION EQUAL 1600)
       set (COMPILER vc10)
-    elseif (MSVC11)
+    elseif (MSVC_VERSION EQUAL 1700)
       set (COMPILER vc11)
-    elseif (MSVC12)
+    elseif (MSVC_VERSION EQUAL 1800)
       set (COMPILER vc12)
-    elseif (MSVC14)
+    elseif (MSVC_VERSION EQUAL 1900)
       set (COMPILER vc14)
-    elseif (MSVC15)
+    elseif ((MSVC_VERSION GREATER 1900) AND (MSVC_VERSION LESS 2000))
       # Since Visual Studio 15 (2017), its version diverged from version of
       # compiler which is 14.1; as that compiler uses the same run-time as 14.0,
       # we keep its id as "vc14" to be compatibille
       set (COMPILER vc14)
+    else()
+      message (FATAL_ERROR "Unrecognized MSVC_VERSION")
     endif()
   elseif (DEFINED CMAKE_COMPILER_IS_GNUCC)
     set (COMPILER gcc)
@@ -116,7 +118,7 @@ function (FIND_SUBDIRECTORY ROOT_DIRECTORY DIRECTORY_SUFFIX SUBDIRECTORY_NAME)
   foreach (SUBDIR_NAME ${SUBDIR_NAME_LIST})
     #message("Subdir: ${SUBDIR_NAME}, ${DIRECTORY_SUFFIX}")
     # REGEX failed if the directory name contains '++' combination, so we replace it
-    string(REPLACE "++" "\\+\\+" SUBDIR_NAME_ESCAPED ${SUBDIR_NAME})
+    string(REPLACE "+" "\\+" SUBDIR_NAME_ESCAPED ${SUBDIR_NAME})
     string (REGEX MATCH "${SUBDIR_NAME_ESCAPED}" DOES_PATH_CONTAIN "${DIRECTORY_SUFFIX}")
     if (DOES_PATH_CONTAIN)
       set(${SUBDIRECTORY_NAME} "${ROOT_DIRECTORY}/${SUBDIR_NAME}" PARENT_SCOPE)
@@ -340,7 +342,7 @@ macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOO
   string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
   message (STATUS "Info: \(${CURRENT_TIME}\) Checking headers in inc folder...")
     
-  file (GLOB OCCT_HEADER_FILES_OLD "${ROOT_TARGET_OCCT_DIR}/inc/*")
+  file (GLOB OCCT_HEADER_FILES_OLD "${ROOT_TARGET_OCCT_DIR}/${OCCT_INSTALL_DIR_PREFIX}/*")
   foreach (OCCT_HEADER_FILE_OLD ${OCCT_HEADER_FILES_OLD})
     get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE_OLD} NAME)
     string (REGEX MATCH "^[a-zA-Z0-9]+" PACKAGE_NAME "${HEADER_FILE_NAME}")
@@ -500,11 +502,11 @@ function (OCCT_TOOLKIT_FULL_DEP TOOLKIT_NAME TOOLKIT_FULL_DEPS)
   set (${TOOLKIT_FULL_DEPS} ${LOCAL_TOOLKIT_FULL_DEPS} PARENT_SCOPE)
 endfunction()
 
-# Function to get list of modules and toolkits from file adm/MODULES.
+# Function to get list of modules/toolkits/samples from file adm/${FILE_NAME}.
 # Creates list <$MODULE_LIST> to store list of MODULES and
-# <NAME_OF_MODULE>_TOOLKITS foreach module to store its toolkits.
-function (OCCT_MODULES_AND_TOOLKITS MODULE_LIST)
-  FILE_TO_LIST ("adm/MODULES" FILE_CONTENT)
+# <NAME_OF_MODULE>_TOOLKITS foreach module to store its toolkits, where "TOOLKITS" is defined by TOOLKITS_NAME_SUFFIX.
+function (OCCT_MODULES_AND_TOOLKITS FILE_NAME TOOLKITS_NAME_SUFFIX MODULE_LIST)
+  FILE_TO_LIST ("adm/${FILE_NAME}" FILE_CONTENT)
 
   foreach (CONTENT_LINE ${FILE_CONTENT})
     string (REPLACE " " ";" CONTENT_LINE ${CONTENT_LINE})
@@ -512,30 +514,12 @@ function (OCCT_MODULES_AND_TOOLKITS MODULE_LIST)
     list (REMOVE_AT CONTENT_LINE 0)
     list (APPEND ${MODULE_LIST} ${MODULE_NAME})
     # (!) REMOVE THE LINE BELOW (implicit variables)
-    set (${MODULE_NAME}_TOOLKITS ${CONTENT_LINE} PARENT_SCOPE)
+    set (${MODULE_NAME}_${TOOLKITS_NAME_SUFFIX} ${CONTENT_LINE} PARENT_SCOPE)
   endforeach()
 
   set (${MODULE_LIST} ${${MODULE_LIST}} PARENT_SCOPE)
 endfunction()
 
-# Function to get list of tools and toolkits from file adm/TOOLS.
-# Creates list <$TOOL_LIST> to store list of TOOLS and
-# <NAME_OF_TOOL>_TOOLKITS foreach tool to store its toolkits.
-function (OCCT_TOOLS_AND_TOOLKITS TOOL_LIST)
-  FILE_TO_LIST ("adm/TOOLS" FILE_CONTENT)
-
-  foreach (CONTENT_LINE ${FILE_CONTENT})
-    string (REPLACE " " ";" CONTENT_LINE ${CONTENT_LINE})
-    list (GET CONTENT_LINE 0 TOOL_NAME)
-    list (REMOVE_AT CONTENT_LINE 0)
-    list (APPEND ${TOOL_LIST} ${TOOL_NAME})
-    # (!) REMOVE THE LINE BELOW (implicit variables)
-    set (${TOOL_NAME}_TOOL_TOOLKITS ${CONTENT_LINE} PARENT_SCOPE)
-  endforeach()
-
-  set (${TOOL_LIST} ${${TOOL_LIST}} PARENT_SCOPE)
-endfunction()
-
 # Returns OCC version string from file Standard_Version.hxx (if available)
 function (OCC_VERSION OCC_VERSION_MAJOR OCC_VERSION_MINOR OCC_VERSION_MAINTENANCE OCC_VERSION_DEVELOPMENT OCC_VERSION_STRING_EXT)
 
@@ -601,7 +585,7 @@ endmacro()
 # prior to version 3.3 not supporting per-configuration install paths
 # for install target files (see https://cmake.org/Bug/view.php?id=14317)
 macro (OCCT_UPDATE_TARGET_FILE)
-  if (NOT SINGLE_GENERATOR)
+  if (MSVC)
     OCCT_INSERT_CODE_FOR_TARGET ()
   endif()
 

adm/cmake/occt_resources.cmake

@@ -68,6 +68,7 @@ FILE_TO_LIST ("adm/RESOURCES" RESOURCES)
 foreach (CurrentResource ${RESOURCES})
   get_filename_component (CurrentResource_FileName "${CurrentResource}" NAME)
   if ("${CurrentResource_FileName}" STREQUAL TObj.msg OR
+      "${CurrentResource_FileName}" STREQUAL BOPAlgo.msg OR
       "${CurrentResource_FileName}" STREQUAL Units.dat OR
       "${CurrentResource}" STREQUAL XSMessage OR
       "${CurrentResource}" STREQUAL SHMessage OR

adm/cmake/occt_toolkit.cmake

@@ -1,28 +1,69 @@
 # script for each OCCT toolkit
 
-# parce PACKAGES file
-if ("${PROJECT_NAME}" STREQUAL DRAWEXE)
-  set (USED_PACKAGES DRAWEXE)
-else()
-  FILE_TO_LIST ("src/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+# filling some variables by default values(src) or using custom(tools, samples)
+set (RELATIVE_SOURCES_DIR "${RELATIVE_DIR}")
+if ("${RELATIVE_SOURCES_DIR}" STREQUAL "")
+  #if it is not defined, use default directory
+  set (RELATIVE_SOURCES_DIR "src")
 endif()
 
+set (OCC_MODULES_LIST "${MODULES_LIST}")
+if ("${OCC_MODULES_LIST}" STREQUAL "")
+  set (OCC_MODULES_LIST ${OCCT_MODULES})
+endif()
+
+set (OCC_TARGET_FOLDER "${TARGET_FOLDER}")
+if ("${OCC_TARGET_FOLDER}" STREQUAL "")
+  set (OCC_TARGET_FOLDER "Modules")
+endif()
+
+set (OCCT_TOOLKITS_NAME_SUFFIX "${TOOLKITS_NAME_SUFFIX}")
+if ("${OCCT_TOOLKITS_NAME_SUFFIX}" STREQUAL "")
+  set (OCCT_TOOLKITS_NAME_SUFFIX "TOOLKITS")
+endif()
+
+# parce PACKAGES file
+FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+if ("${USED_PACKAGES}" STREQUAL "")
+  set (USED_PACKAGES ${PROJECT_NAME})
+endif()
+
+if (USE_QT)
+  # Qt dependencies
+  OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt_macro)
+  FIND_QT_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
+  include_directories("${PROJECT_INCLUDES}")
+endif(USE_QT)
+
 set (PRECOMPILED_DEFS)
 
 if (NOT BUILD_SHARED_LIBS)
   list (APPEND PRECOMPILED_DEFS "-DOCCT_NO_PLUGINS")
+  if (WIN32)
+    list (APPEND PRECOMPILED_DEFS "-DOCCT_STATIC_BUILD")
+  endif()
 endif()
 
 # Get all used packages from toolkit
+UNSET(RESOURCE_FILES)
 foreach (OCCT_PACKAGE ${USED_PACKAGES})
-  
+
+  #remove part after "/" in the OCCT_PACKAGE variable if exists
+  string (FIND "${OCCT_PACKAGE}" "/" _index)
+  if (_index GREATER -1)
+    math (EXPR _index "${_index}")
+    string (SUBSTRING "${OCCT_PACKAGE}" 0 ${_index} OCCT_PACKAGE_NAME)
+  else()
+    set (OCCT_PACKAGE_NAME "${OCCT_PACKAGE}")
+  endif()
+
   # TKService contains platform-dependent packages: Xw and WNT
   if ((WIN32 AND "${OCCT_PACKAGE}" STREQUAL "Xw") OR (NOT WIN32 AND "${OCCT_PACKAGE}" STREQUAL "WNT"))
     # do nothing
   else()
 
     if (WIN32)
-      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
+      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE_NAME}_DLL")
     endif()
 
     set (SOURCE_FILES)
@@ -32,11 +73,11 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
     if (${BUILD_YACCLEX})
 
       # flex files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
+      OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
       list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
 
       # bison files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
+      OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
       list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
 
       if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
@@ -58,8 +99,8 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
           if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
             set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
             set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
-            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
-            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
+            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
+            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
             ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
            
             list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
@@ -69,23 +110,23 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
     endif()
 
     # header files
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES")
-      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
 
-      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
       if(APPLE)
-        file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
+        file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
       endif()
     else()
-      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
 
-      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
       if(APPLE)
-        file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
+        file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
       endif()
     endif()
     
@@ -96,26 +137,36 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
     endif()
 
     foreach(HEADER_FILE ${HEADER_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-        list (APPEND USED_INCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
       else()
-        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
       endif()
     endforeach()
 
     foreach(SOURCE_FILE ${SOURCE_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        list (APPEND USED_SRCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
       else()
-        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
       endif()
     endforeach()
+
+    if (USE_QT)
+      FIND_AND_INSTALL_QT_RESOURCES (${OCCT_PACKAGE} RESOURCE_FILES)
+      #message("Qt Resource files are: ${QT_RESOURCE_FILES} in ${OCCT_PACKAGE}")
+    endif(USE_QT)
+
+    #message("Resource files are: ${RESOURCE_FILES} in ${OCCT_PACKAGE}")
+    foreach(RESOURCE_FILE ${RESOURCE_FILES})
+      SOURCE_GROUP ("Resource Files\\${OCCT_PACKAGE_NAME}" FILES "${RESOURCE_FILE}")
+    endforeach()
   endif()
 endforeach()
 string (REGEX REPLACE ";" " " PRECOMPILED_DEFS "${PRECOMPILED_DEFS}")
@@ -132,28 +183,34 @@ if (MSVC)
 endif()
 
 set (CURRENT_MODULE)
-foreach (OCCT_MODULE ${OCCT_MODULES})
-  list (FIND ${OCCT_MODULE}_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
+foreach (OCCT_MODULE ${OCC_MODULES_LIST})
+  list (FIND ${OCCT_MODULE}_${OCCT_TOOLKITS_NAME_SUFFIX} ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
+
   if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
     set (CURRENT_MODULE ${OCCT_MODULE})
   endif()
 endforeach()
 
-if (NOT SINGLE_GENERATOR)
+if (MSVC)
   OCCT_INSERT_CODE_FOR_TARGET ()
 endif()
 
-if ("${PROJECT_NAME}" STREQUAL "DRAWEXE")
-  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})
+if (USE_QT)
+  FIND_AND_WRAP_MOC_FILES("${USED_INCFILES}" "${PROJECT_NAME}_MOC_FILES")
+  #message("MOC files: ${${PROJECT_NAME}_MOC_FILES}")
+endif (USE_QT)
+
+if (EXECUTABLE_PROJECT)
+  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RESOURCE_FILES} ${${PROJECT_NAME}_MOC_FILES})
 
   install (TARGETS ${PROJECT_NAME}
            DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
 else()
-  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})
+  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RESOURCE_FILES} ${${PROJECT_NAME}_MOC_FILES})
 
   if (MSVC)
-    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind/${PROJECT_NAME}.pdb
-             CONFIGURATIONS Debug
+    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
+             CONFIGURATIONS Debug RelWithDebInfo
              DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
   endif()
 
@@ -178,7 +235,7 @@ else()
 endif()
 
 if (CURRENT_MODULE)
-  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "Modules/${CURRENT_MODULE}")
+  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "${OCC_TARGET_FOLDER}/${CURRENT_MODULE}")
   set_target_properties (${PROJECT_NAME} PROPERTIES MODULE "${CURRENT_MODULE}")
   if (APPLE)
     if (NOT "${INSTALL_NAME_DIR}" STREQUAL "")
@@ -204,7 +261,7 @@ set (USED_TOOLKITS_BY_CURRENT_PROJECT)
 set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)
 
 # parce EXTERNLIB file
-FILE_TO_LIST ("src/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
+FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
 foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
   string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
   if (NOT COMMENT_FOUND)
@@ -213,6 +270,9 @@ foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
     
     if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
       list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
+      if (NOT "${VTK_FOUND}" STREQUAL "" AND BUILD_SHARED_LIBS AND INSTALL_VTK AND COMMAND OCCT_INSTALL_VTK)
+        OCCT_INSTALL_VTK(${USED_ITEM})
+      endif()
     else()
       string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
       if ("${CSF_FOUND}" STREQUAL "")
@@ -278,15 +338,34 @@ if("${VTK_RENDERING_BACKEND}" STREQUAL "OpenGL2")
       list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT ${VTK_EXCLUDE_LIBRARY})
       if (${VTK_EXCLUDE_LIBRARY} STREQUAL vtkRenderingOpenGL)
         list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT vtkRenderingOpenGL2)
+        if(VTK_MAJOR_VERSION GREATER 6)
+          list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT vtkRenderingGL2PSOpenGL2)
+        endif()
       endif()
     endif()
   endforeach()
+else()
+  if(VTK_MAJOR_VERSION EQUAL 6 AND VTK_MINOR_VERSION GREATER 2 OR VTK_MAJOR_VERSION GREATER 6)
+    list (FIND USED_TOOLKITS_BY_CURRENT_PROJECT "vtkRenderingFreeTypeOpenGL" IS_VTK_RENDER_FREETYPE_FOUND)
+    if (NOT ${IS_VTK_RENDER_FREETYPE_FOUND} EQUAL -1)
+      list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT "vtkRenderingFreeTypeOpenGL")
+    endif()
+  endif()
 endif()
 
 if (BUILD_SHARED_LIBS)
   target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
 endif()
 
+if (USE_QT)
+  foreach (PROJECT_LIBRARY_DEBUG ${PROJECT_LIBRARIES_DEBUG})
+    target_link_libraries (${PROJECT_NAME} debug ${PROJECT_LIBRARY_DEBUG})
+  endforeach()
+  foreach (PROJECT_LIBRARY_RELEASE ${PROJECT_LIBRARIES_RELEASE})
+    target_link_libraries (${PROJECT_NAME} optimized ${PROJECT_LIBRARY_RELEASE})
+  endforeach()
+endif()
+
 # suppress deprecation warnings inside OCCT itself for old gcc versions with unavailable Standard_DISABLE_DEPRECATION_WARNINGS
 if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
   if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.6.0)

adm/cmake/occt_toolkit_prepare_sample.cmake

@@ -0,0 +1,18 @@
+if ("${TARGET_FOLDER}" STREQUAL "")
+  set (EXECUTABLE_PROJECT ON)
+  set (USE_QT ON)
+
+  set (RELATIVE_DIR "samples/qt")
+  set (MODULES_LIST ${OCCT_SAMPLES})
+  set (TARGET_FOLDER "Samples")
+  set (TOOLKITS_NAME_SUFFIX "SAMPLES_TOOLKITS")
+
+  include_directories("${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/${RELATIVE_DIR}")
+else()
+  unset (USE_QT)
+  unset (RELATIVE_DIR)
+  unset (EXECUTABLE_PROJECT)
+  unset (MODULES_LIST)
+  unset (TARGET_FOLDER)
+  unset (TOOLKITS_NAME_SUFFIX)
+endif("${TARGET_FOLDER}" STREQUAL "")

adm/cmake/occt_toolkit_prepare_tool.cmake

@@ -0,0 +1,13 @@
+if ("${TARGET_FOLDER}" STREQUAL "")
+  set (USE_QT ON)
+  set (RELATIVE_DIR "tools")
+  set (MODULES_LIST ${OCCT_TOOLS})
+  set (TARGET_FOLDER "Tools")
+  set (TOOLKITS_NAME_SUFFIX "TOOL_TOOLKITS")
+else()
+  unset (USE_QT)
+  unset (RELATIVE_DIR)
+  unset (MODULES_LIST)
+  unset (TARGET_FOLDER)
+  unset (TOOLKITS_NAME_SUFFIX)
+endif("${TARGET_FOLDER}" STREQUAL "")

adm/cmake/occt_toolkit_tool.cmake

@@ -1,298 +0,0 @@
-# script for each OCCT tool toolkit
-
-# Qt dependencies
-OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt5_macro)
-
-FIND_QT5_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
-include_directories("${PROJECT_INCLUDES}"
-                    "${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/tools")
-
-FILE_TO_LIST ("tools/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
-# parce PACKAGES file
-
-if ("${PROJECT_NAME}" STREQUAL TInspectorEXE)
-  set (USED_PACKAGES ${PROJECT_NAME})
-  set (PACKAGE_PREFIX_DIR "samples/tools")
-  include_directories("${PROJECT_INCLUDES}"
-                      "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${PROJECT_NAME}")
-else()
-  FILE_TO_LIST ("tools/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
-  set (PACKAGE_PREFIX_DIR "tools")
-endif()
-
-
-SET (RCC_FILES)
-foreach (OCCT_PACKAGE ${USED_PACKAGES})
-  file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
-
-  #message("Sources are ${SOURCE_FILES_C}")
-  FIND_AND_WRAP_MOC_FILES("${SOURCE_FILES_C}")
-
-  #message("Dir is ${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${OCCT_PACKAGE}.qrc")
-  FIND_AND_WRAP_RESOURCE_FILE("${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${OCCT_PACKAGE}.qrc" RCC_FILES)
-endforeach()
-#message("RCC_FILES for ${PROJECT_NAME} are ${RCC_FILES}")
-
-set (PRECOMPILED_DEFS)
-
-if (NOT BUILD_SHARED_LIBS)
-  list (APPEND PRECOMPILED_DEFS "-DOCCT_NO_PLUGINS")
-endif()
-
-# Get all used packages from toolkit
-foreach (OCCT_PACKAGE ${USED_PACKAGES})
-
-  ADD_DEFINITIONS(-D${OCCT_PACKAGE}_EXPORTS)
-  
-  # TKService contains platform-dependent packages: Xw and WNT
-  if ((WIN32 AND "${OCCT_PACKAGE}" STREQUAL "Xw") OR (NOT WIN32 AND "${OCCT_PACKAGE}" STREQUAL "WNT"))
-    # do nothing
-  else()
-
-    if (WIN32)
-      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
-    endif()
-
-    set (SOURCE_FILES)
-    set (HEADER_FILES)
-
-    # Generate Flex and Bison files
-    if (${BUILD_YACCLEX})
-
-      # flex files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("tools/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
-      list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
-
-      # bison files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("tools/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
-      list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
-
-      if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
-      
-        list (SORT SOURCE_FILES_FLEX)
-        list (SORT SOURCE_FILES_BISON)
-
-        math (EXPR SOURCE_FILES_FLEX_LEN "${SOURCE_FILES_FLEX_LEN} - 1")
-        foreach (FLEX_FILE_INDEX RANGE ${SOURCE_FILES_FLEX_LEN})
-
-          list (GET SOURCE_FILES_FLEX ${FLEX_FILE_INDEX} CURRENT_FLEX_FILE)
-          get_filename_component (CURRENT_FLEX_FILE_NAME ${CURRENT_FLEX_FILE} NAME_WE)
-
-          list (GET SOURCE_FILES_BISON ${FLEX_FILE_INDEX} CURRENT_BISON_FILE)
-          get_filename_component (CURRENT_BISON_FILE_NAME ${CURRENT_BISON_FILE} NAME_WE)
-          
-          string (COMPARE EQUAL ${CURRENT_FLEX_FILE_NAME} ${CURRENT_BISON_FILE_NAME} ARE_FILES_EQUAL)
-
-          if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
-            set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
-            set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
-            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/tools/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
-            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/tools/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
-            ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
-           
-            list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
-          endif()
-        endforeach()
-      endif()
-    endif()
-
-    # header files
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES")
-      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
-
-      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
-      if(APPLE)
-        file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
-      endif()
-    else()
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
-
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
-      if(APPLE)
-        file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
-      endif()
-    endif()
-
-
-    
-    list (APPEND HEADER_FILES ${HEADER_FILES_M} ${HEADER_FILES_LXX} ${SOURCE_FILES_GXX})
-    list (APPEND SOURCE_FILES ${SOURCE_FILES_C})
-    if(APPLE)
-      list (APPEND SOURCE_FILES ${SOURCE_FILES_M})
-    endif()
-
-    foreach(HEADER_FILE ${HEADER_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
-        list (APPEND USED_INCFILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
-      else()
-        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-      endif()
-    endforeach()
-
-
-    foreach(SOURCE_FILE ${SOURCE_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        list (APPEND USED_SRCFILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      else()
-        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      endif()
-    endforeach()
-  endif()
-endforeach()
-string (REGEX REPLACE ";" " " PRECOMPILED_DEFS "${PRECOMPILED_DEFS}")
-
-set (USED_RCFILE "")
-if (MSVC)
-  set (USED_RCFILE "${CMAKE_BINARY_DIR}/resources/${PROJECT_NAME}.rc")
-
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in")
-    configure_file("${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
-  else()
-    configure_file("${CMAKE_SOURCE_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
-  endif()
-endif()
-
-set (CURRENT_MODULE)
-foreach (OCCT_MODULE ${OCCT_TOOLS})
-  list (FIND ${OCCT_MODULE}_TOOL_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
-  if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
-    set (CURRENT_MODULE ${OCCT_MODULE})
-  endif()
-endforeach()
-
-if (NOT SINGLE_GENERATOR)
-  OCCT_INSERT_CODE_FOR_TARGET ()
-endif()
-
-if ("${PROJECT_NAME}" STREQUAL TInspectorEXE)
-  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RCC_FILES})
-
-  install (TARGETS ${PROJECT_NAME}
-           DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
-else()
-  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RCC_FILES})
-
-  if (MSVC)
-    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind/${PROJECT_NAME}.pdb
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
-  endif()
-
-  if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
-    set (CMAKE_SHARED_LIBRARY_SUFFIX_DEFAULT ${CMAKE_SHARED_LIBRARY_SUFFIX})
-    set (CMAKE_SHARED_LIBRARY_SUFFIX "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}${CMAKE_SHARED_LIBRARY_SUFFIX}")
-  endif()
-
-  install (TARGETS ${PROJECT_NAME}
-           EXPORT OpenCASCADE${CURRENT_MODULE}Targets
-           RUNTIME DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}"
-           ARCHIVE DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}"
-           LIBRARY DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}")
-
-
-  if (NOT WIN32)
-    if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
-      set (LINK_NAME    "${INSTALL_DIR}/${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}/lib${PROJECT_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX_DEFAULT}/tools")
-      set (LIBRARY_NAME "${INSTALL_DIR}/${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}/lib${PROJECT_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX}/tools")
-      OCCT_CREATE_SYMLINK_TO_FILE (${LIBRARY_NAME} ${LINK_NAME})
-    endif()
-  endif()
-endif()
-
-if (CURRENT_MODULE)
-  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "Tools/${CURRENT_MODULE}")
-  set_target_properties (${PROJECT_NAME} PROPERTIES MODULE "${CURRENT_MODULE}")
-  if (APPLE)
-    if (NOT "${INSTALL_NAME_DIR}" STREQUAL "")
-      set_target_properties (${PROJECT_NAME} PROPERTIES BUILD_WITH_INSTALL_RPATH 1 INSTALL_NAME_DIR "${INSTALL_NAME_DIR}")
-    endif()
-  endif()
-endif()
-
-get_property (OCC_VERSION_MAJOR GLOBAL PROPERTY OCC_VERSION_MAJOR)
-get_property (OCC_VERSION_MINOR GLOBAL PROPERTY OCC_VERSION_MINOR)
-get_property (OCC_VERSION_MAINTENANCE GLOBAL PROPERTY OCC_VERSION_MAINTENANCE)
-
-if (ANDROID)
-  # do not append version to the filename
-  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}")
-else()
-  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}"
-                                                    SOVERSION     "${OCC_VERSION_MAJOR}"
-                                                    VERSION       "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}.${OCC_VERSION_MAINTENANCE}")
-endif()
-
-set (USED_TOOLKITS_BY_CURRENT_PROJECT)
-set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)
-
-# parce EXTERNLIB file
-FILE_TO_LIST ("${PACKAGE_PREFIX_DIR}/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
-foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
-  string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
-  if (NOT COMMENT_FOUND)
-    string (REGEX MATCH "^TK" TK_FOUND ${USED_ITEM})
-    string (REGEX MATCH "^vtk" VTK_FOUND ${USED_ITEM})
-    
-    if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
-      list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
-    else()
-      string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
-      if ("${CSF_FOUND}" STREQUAL "")
-        message (STATUS "Info: ${USED_ITEM} from ${PROJECT_NAME} skipped due to it is empty")
-      else() # get CSF_ value
-        set (CURRENT_CSF ${${USED_ITEM}})
-        if (NOT "x${CURRENT_CSF}" STREQUAL "x")
-          # prepare a list from a string with whitespaces
-          separate_arguments (CURRENT_CSF)
-          list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT ${CURRENT_CSF})
-        endif()
-      endif()
-    endif()
-  endif()
-endforeach()
-
-if (APPLE)
-  list (FIND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT X11 IS_X11_FOUND)
-  if (NOT ${IS_X11_FOUND} EQUAL -1)
-    find_package (X11 COMPONENTS X11 Xext Xmu Xi)
-    if (NOT X11_FOUND)
-      message (STATUS "Warning: X11 is not found. It's required to install The XQuartz project: http://www.xquartz.org")
-    endif()
-  endif()
-endif()
-
-# Update list of used VTK libraries if OpenGL2 Rendering BackEnd is used.
-# Add VTK_OPENGL2_BACKEND definition.
-if("${VTK_RENDERING_BACKEND}" STREQUAL "OpenGL2")
-  add_definitions(-DVTK_OPENGL2_BACKEND)
-  foreach (VTK_EXCLUDE_LIBRARY vtkRenderingOpenGL vtkRenderingFreeTypeOpenGL)
-    list (FIND USED_TOOLKITS_BY_CURRENT_PROJECT "${VTK_EXCLUDE_LIBRARY}" IS_VTK_OPENGL_FOUND)
-    if (NOT ${IS_VTK_OPENGL_FOUND} EQUAL -1)
-      list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT ${VTK_EXCLUDE_LIBRARY})
-      if (${VTK_EXCLUDE_LIBRARY} STREQUAL vtkRenderingOpenGL)
-        list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT vtkRenderingOpenGL2)
-      endif()
-    endif()
-  endforeach()
-endif()
-
-if (BUILD_SHARED_LIBS)
-  target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
-endif()
-
-# Set Qt dependencies
-target_link_libraries(${PROJECT_NAME} "${PROJECT_LIBRARIES}")
-
-target_link_libraries(${PROJECT_NAME} debug "${PROJECT_LIBRARIES_DEBUG}")
-target_link_libraries(${PROJECT_NAME} optimized "${PROJECT_LIBRARIES_RELEASE}")
-

adm/cmake/qt.cmake

@@ -0,0 +1,36 @@
+#qt
+
+#looking for 3RDPARTY_QT_DIR variable used later in qt_macro.cmake
+SET(CSF_QtCore "QtCore")
+THIRDPARTY_PRODUCT("QT" "" "CSF_QtCore" "d")
+
+list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_QT_DIR}/bin")
+
+list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_INCLUDE_DIR")
+list (REMOVE_ITEM 3RDPARTY_NO_LIBS "3RDPARTY_QT_LIBRARY_DIR")
+list (REMOVE_ITEM 3RDPARTY_NO_DLLS "3RDPARTY_QT_DLL_DIR")
+
+UNSET (${3RDPARTY_QT_DLL} CACHE)
+UNSET (${3RDPARTY_QT_DLL_DIR} CACHE)
+UNSET (${3RDPARTY_QT_INCLUDE_DIR} CACHE)
+UNSET (${3RDPARTY_QT_LIBRARY} CACHE)
+UNSET (${3RDPARTY_QT_LIBRARY_DIR} CACHE)
+
+set (USED_3RDPARTY_QT_DIR "${3RDPARTY_QT_DIR}")
+message (STATUS "Info: Qt is used from folder: ${3RDPARTY_QT_DIR}")
+
+# Now set CMAKE_PREFIX_PATH to point to local Qt installation.
+# Without this setting find_package() will not work
+set(CMAKE_PREFIX_PATH ${3RDPARTY_QT_DIR})
+
+# Now we can apply standard CMake finder for Qt5. We do this mostly
+# to have qt5_wrap_cpp() function available and Qt5_FOUND variable filled
+find_package(Qt5 QUIET COMPONENTS Widgets Quick Xml PATHS ${3RDPARTY_QT_DIR} NO_DEFAULT_PATH)
+if (NOT ${Qt5_FOUND})
+  # Now we can apply standard CMake finder for Qt. We do this mostly
+  # to have qt4_wrap_cpp() function available
+  find_package(Qt4)
+  #message (STATUS "Qt4 cmake configuration")
+else()
+  #message (STATUS "Qt5 cmake configuration")
+endif()

adm/cmake/qt5.cmake

@@ -1,22 +0,0 @@
-#qt
-
-#looking for 3RDPARTY_QT_DIR variable used later in qt5_macro.cmake
-if (${USE_QT4})
-  SET(CSF_QtCore "QtCore")
-  THIRDPARTY_PRODUCT("QT" "" "CSF_QtCore" "d")
-else()
-  SET(CSF_Qt5Core "Qt5Core")
-  THIRDPARTY_PRODUCT("QT" "" "CSF_Qt5Core" "d")
-endif()
-
-list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_INCLUDE_DIR")
-list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_LIBRARY_DIR")
-list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_DLL_DIR")
-
-UNSET (${3RDPARTY_QT_DLL} CACHE)
-UNSET (${3RDPARTY_QT_DLL_DIR} CACHE)
-UNSET (${3RDPARTY_QT_INCLUDE_DIR} CACHE)
-UNSET (${3RDPARTY_QT_LIBRARY} CACHE)
-UNSET (${3RDPARTY_QT_LIBRARY_DIR} CACHE)
-
-set (USED_3RDPARTY_QT_DIR "${3RDPARTY_QT_DIR}")

adm/cmake/qt5_macro.cmake

@@ -1,68 +0,0 @@
-#qt
-
-macro (FIND_QT5_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
-
-  if ("${3RDPARTY_QT_DIR}" STREQUAL "")
-    message (FATAL_ERROR "Empty Qt dir")
-  endif()
-
-  # Now set CMAKE_PREFIX_PATH to point to local Qt installation.
-  # Without this setting find_package() will not work
-  set(CMAKE_PREFIX_PATH ${3RDPARTY_QT_DIR})
-  if (USE_QT4)
-    # Now we can apply standard CMake finder for Qt. We do this mostly
-    # to have qt5_wrap_cpp() function available
-    find_package(Qt4)
-    #message (STATUS "Qt cmake configuration at directory ${Qt4DIR}")
-
-    set(PROJECT_INCLUDES ${QT_INCLUDES})
-    if (WIN32)
-      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/QtCored4.lib;${3RDPARTY_QT_DIR}/lib/QtGuid4.lib")
-      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/QtCore4.lib;${3RDPARTY_QT_DIR}/lib/QtGui4.lib")
-    else()
-      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
-      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
-    endif(WIN32)
-  else()
-    # Now we can apply standard CMake finder for Qt4. We do this mostly
-    # to have qt5_wrap_cpp() function available
-    find_package(Qt5 REQUIRED COMPONENTS Widgets)
-    #message (STATUS "Qt cmake configuration at directory ${Qt5DIR}")
-
-    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}")
-    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}")
-    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}")
-  endif()
-endmacro()
-
-
-macro (FIND_AND_WRAP_MOC_FILES SOURCE_FILES)
-  SET(CMAKE_AUTOMOC ON)
-
-  foreach (FILE ${SOURCE_FILES})
-    set (src_files ${src_files} ${FILE})
-    unset (MOC_FILE)
-    if (USE_QT4)
-      qt4_wrap_cpp(MOC_FILE ${FILE})
-    else()
-      qt5_wrap_cpp(MOC_FILE ${FILE})
-    endif()
-    #message (STATUS "... Info: next MOC file ${MOC_FILE}")
-
-  endforeach (FILE)
-
-endmacro()
-
-macro (FIND_AND_WRAP_RESOURCE_FILE RESOURCE_FILE_NAME RCC_FILES)
-  if(EXISTS "${RESOURCE_FILE_NAME}")
-    if (USE_QT4)
-      qt4_add_resources(RCC_FILES "${RESOURCE_FILE_NAME}")
-      # suppress some GCC warnings coming from source files generated from .qrc resources
-      if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
-        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-unused-variable")
-      endif()
-    else()
-      qt5_add_resources(RCC_FILES "${RESOURCE_FILE_NAME}")
-    endif()
-  endif()
-endmacro()

adm/cmake/qt_macro.cmake

@@ -0,0 +1,117 @@
+#qt
+
+macro (FIND_QT_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
+
+  if ("${3RDPARTY_QT_DIR}" STREQUAL "")
+    message (FATAL_ERROR "Empty Qt dir")
+  endif()
+
+  if (${Qt5_FOUND})
+    #message (STATUS "Qt5 cmake configuration")
+
+    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}" "${Qt5Quick_INCLUDE_DIRS}" "${Qt5Xml_INCLUDE_DIRS}")
+    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}" "${Qt5Quick_LIBRARIES}" "${Qt5Xml_LIBRARIES}")
+    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}" "${Qt5Quick_LIBRARIES}" "${Qt5Xml_LIBRARIES}")
+
+    # processing *.ts files to generate *.qm
+    find_package(Qt5LinguistTools)
+    get_target_property(QT_LRELEASE_EXECUTABLE Qt5::lrelease LOCATION)
+    mark_as_advanced(QT_LRELEASE_EXECUTABLE)
+
+    GET_FILENAME_COMPONENT(QT_BINARY_DIR ${QT_LRELEASE_EXECUTABLE} DIRECTORY)
+    MARK_AS_ADVANCED(QT_BINARY_DIR)
+  else()
+    #message (STATUS "Qt4 cmake configuration")
+    set(PROJECT_INCLUDES ${QT_INCLUDES})
+    if (WIN32)
+      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/QtCored4.lib;${3RDPARTY_QT_DIR}/lib/QtGuid4.lib;${3RDPARTY_QT_DIR}/lib/QtXmld4.lib")
+      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/QtCore4.lib;${3RDPARTY_QT_DIR}/lib/QtGui4.lib;${3RDPARTY_QT_DIR}/lib/QtXml4.lib")
+    else()
+      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so;${3RDPARTY_QT_DIR}/lib/libQtXml.so")
+      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so;${3RDPARTY_QT_DIR}/lib/libQtXml.so")
+    endif(WIN32)
+    find_program(QT_LRELEASE_EXECUTABLE lrelease)
+  endif()
+endmacro()
+
+
+macro (FIND_AND_WRAP_MOC_FILES HEADER_FILES GENERATED_MOC_FILES)
+  set (GENERATED_MOC_FILES "")
+  foreach (FILE ${HEADER_FILES})
+    # processing only files where Q_OBJECT exists
+    file(STRINGS "${FILE}" LINES REGEX "Q_OBJECT")
+    if(LINES)
+      unset (MOC_FILE)
+      if (${Qt5_FOUND})
+        qt5_wrap_cpp(MOC_FILE ${FILE})
+      else()
+        qt4_wrap_cpp(MOC_FILE ${FILE})
+      endif()
+      #message (STATUS "... Info: next MOC file ${MOC_FILE}")
+      list(APPEND ${GENERATED_MOC_FILES} ${MOC_FILE})
+     endif(LINES)
+  endforeach (FILE)
+
+endmacro()
+
+macro (FIND_AND_WRAP_RESOURCE_FILE RESOURCE_FILE_NAME RCC_FILES)
+  if(EXISTS "${RESOURCE_FILE_NAME}")
+    if (${Qt5_FOUND})
+      qt5_add_resources(RCC_FILES "${RESOURCE_FILE_NAME}")
+    else()
+      qt4_add_resources(RCC_FILES "${RESOURCE_FILE_NAME}")
+      # suppress some GCC warnings coming from source files generated from .qrc resources
+      if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
+        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-unused-variable")
+      endif()
+    endif()
+  endif()
+endmacro()
+
+macro (FIND_AND_WRAP_TS_FILE RESOURCE_FILE_NAME TARGET_FOLDER QM_FILES)
+  if(EXISTS "${RESOURCE_FILE_NAME}")
+    if (${Qt5_FOUND})
+      qt5_add_translation(QM_FILES "${RESOURCE_FILE_NAME}")
+    else()
+      qt4_add_translation(QM_FILES "${RESOURCE_FILE_NAME}")
+    endif()
+  endif()
+endmacro()
+
+macro (FIND_AND_INSTALL_QT_RESOURCES OCCT_PACKAGE RESOURCE_FILES)
+  file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   TS_FILES   REGEX ".+[.]ts")
+  file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   QRC_FILES  REGEX ".+[.]qrc")
+
+  string (FIND "${OCCT_PACKAGE}" "/" _index)
+  if (_index GREATER -1)
+    math (EXPR _index "${_index}")
+    string (SUBSTRING "${OCCT_PACKAGE}" 0 ${_index} OCCT_PACKAGE_NAME)
+  else()
+    set (OCCT_PACKAGE_NAME "${OCCT_PACKAGE}")
+  endif(_index GREATER -1)
+
+  #message("QRC files are: ${QRC_FILES} in ${OCCT_PACKAGE}")
+  foreach (QRC_FILE ${QRC_FILES})
+    set (QRC_FILE_RELATIVE "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${QRC_FILE}")
+    if (EXISTS ${QRC_FILE_RELATIVE})
+      FIND_AND_WRAP_RESOURCE_FILE(${QRC_FILE_RELATIVE} RCC_FILES)
+      list (APPEND ${RESOURCE_FILES} "${RCC_FILES}")
+    endif()
+  endforeach()
+
+  #message("TS files are: ${TS_FILES} in ${OCCT_PACKAGE}")
+  foreach (TS_FILE ${TS_FILES})
+    set (TS_FILE_RELATIVE "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${TS_FILE}")
+    FIND_AND_WRAP_TS_FILE(${TS_FILE_RELATIVE} "${TARGET_FOLDER}/${CURRENT_MODULE}" QM_FILES)
+    if (EXISTS ${TS_FILE_RELATIVE})
+      list (APPEND ${RESOURCE_FILES} "${TS_FILE_RELATIVE}")
+      list (APPEND ${RESOURCE_FILES} "${QM_FILES}")
+    endif()
+  endforeach()
+
+  foreach (QM_FILE ${QM_FILES})
+    INSTALL(FILES ${QM_FILE} DESTINATION "${INSTALL_DIR_RESOURCE}/samples")
+    #message("install *.qm files (${QM_FILE}) to: ${INSTALL_DIR_RESOURCE}/samples")
+  endforeach (QM_FILE ${QM_FILES})
+endmacro()
+

adm/cmake/tbb.cmake

@@ -173,7 +173,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
   if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)
 
     set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY "" CACHE FILEPATH "The path to ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
   endif()
@@ -226,7 +226,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
     if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR OR EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
+      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
     endif()
   endif()
 
@@ -275,7 +275,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
   mark_as_advanced (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL)
 endmacro()
 
-if (BUILD_SHARED_LIBS)
+#if (BUILD_SHARED_LIBS)
   separate_arguments (CSF_TBB)
   foreach (LIB IN LISTS CSF_TBB)
     TBB_PRODUCT_SEARCH (${LIB})
@@ -291,4 +291,4 @@ if (BUILD_SHARED_LIBS)
       set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_LIBRARY_DIR})
     endif()
   endif()
-endif()
+#endif()

adm/cmake/tcl.cmake

@@ -184,14 +184,14 @@ if (BUILD_SHARED_LIBS)
   if (3RDPARTY_TCL_LIBRARY AND EXISTS "${3RDPARTY_TCL_LIBRARY}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_TCL_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TCL_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_TCL_LIBRARY_DIR)
   endif()
 
   if (WIN32)
     if (3RDPARTY_TCL_DLL OR EXISTS "${3RDPARTY_TCL_DLL}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_TCL_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TCL_DLL_DIR)
+      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_TCL_DLL_DIR)
     endif()
   endif()
 

adm/cmake/tk.cmake

@@ -190,14 +190,14 @@ if (BUILD_SHARED_LIBS)
   if (3RDPARTY_TK_LIBRARY AND EXISTS "${3RDPARTY_TK_LIBRARY}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_TK_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TK_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_TK_LIBRARY_DIR)
   endif()
 
   if (WIN32)
     if (3RDPARTY_TK_DLL OR EXISTS "${3RDPARTY_TK_DLL}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_TK_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TK_DLL_DIR)
+      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_TK_DLL_DIR)
     endif()
   endif()
 

adm/cmake/vardescr.cmake

@@ -40,7 +40,7 @@ Precompiled headers are generated automatically by Cotire tool.")
 # install variables
 set (INSTALL_DIR_DESCR 
 "The place where built OCCT libraries, headers, test cases (INSTALL_TEST_CASES variable),
-samples (INSTALL_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_GL2PS, INSTALL_TBB and
+samples (INSTALL_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_TBB and
 other similar variables) will be placed during the installation process (building INSTALL project)")
 
 set (INSTALL_DIR_WITH_VERSION_DESCR
@@ -84,15 +84,14 @@ INSTALL_MESSAGE (INSTALL_TEST_CASES       "non-regression OCCT test scripts")
 INSTALL_MESSAGE (INSTALL_DOC_Overview     "OCCT overview documentation (HTML format)")
 INSTALL_MESSAGE (INSTALL_FFMPEG           "FFmpeg binaries")
 INSTALL_MESSAGE (INSTALL_FREEIMAGE        "FreeImage binaries")
+INSTALL_MESSAGE (INSTALL_EIGEN            "EIGEN header files")
 INSTALL_MESSAGE (INSTALL_EGL              "EGL binaries")
 INSTALL_MESSAGE (INSTALL_GLES2            "OpenGL ES 2.0 binaries")
 INSTALL_MESSAGE (INSTALL_FREETYPE         "FreeType binaries")
-INSTALL_MESSAGE (INSTALL_GL2PS            "GL2PS binaries")
 INSTALL_MESSAGE (INSTALL_TBB              "TBB binaries")
 INSTALL_MESSAGE (INSTALL_TCL              "TCL binaries")
 INSTALL_MESSAGE (INSTALL_TK               "TK binaries")
-
-#INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
+INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
 
 # build variables
 macro (BUILD_MODULE_MESSAGE BUILD_MODULE_TARGET_VARIABLE BUILD_MODULE_TARGET_STRING)
@@ -117,11 +116,23 @@ want to build some particular libraries (toolkits) only, then you may uncheck
 all modules in the corresponding BUILD_MODUE_* options and provide the list of
 necessary libraries here. Of course, all dependencies will be resolved automatically")
 
-set (BUILD_MODULE_MfcSamples_DESCR
+set (BUILD_SAMPLES_MFC_DESCR
 "Indicates whether OCCT MFC samples should be built together with OCCT.
 These samples show some possibilities of using OCCT and they can be executed
 with script samples.bat from the installation directory (INSTALL_DIR)")
 
+set (BUILD_SAMPLES_QT_DESCR
+"Indicates whether OCCT Qt samples should be built together with OCCT.
+These samples show some possibilities of using OCCT and they can be executed
+with script samples.bat from the installation directory (INSTALL_DIR)")
+
+set (BUILD_Inspector_DESCR
+"Indicates whether OCCT inspector should be built together with OCCT.
+This inspector provides functionality to interactively inspect low-level content
+of the OCAF data model, OCCT viewer, etc. have been introduced in OCCT.
+It can be executed with script inspector.bat from the installation directory (INSTALL_DIR) or
+using 'tinspector' command in DRAW interpretator")
+
 set (BUILD_MODULE_UwpSample_DESCR
 "Indicates whether OCCT UWP sample should be built together with OCCT.")
 
@@ -153,10 +164,6 @@ set (USE_GLES2_DESCR
 "Indicates whether OpenGL ES 2.0 should be used in OCCT visualization
 module instead of desktop OpenGL")
 
-set (USE_GL2PS_DESCR
-"Indicates whether GL2PS product should be used in OCCT visualization
-module for support of vector image formats (PS, EPS etc)")
-
 set (USE_TBB_DESCR
 "Indicates whether TBB is used or not. TBB stands for Threading Building Blocks,
 the technology of Intel Corp, which comes with different mechanisms and patterns for
@@ -172,11 +179,6 @@ set (USE_GLX_DESCR "Indicates whether X11 OpenGl on OSX is used or not")
 
 set (USE_D3D_DESCR "Indicates whether optional Direct3D wrapper in OCCT visualization module should be build or not")
 
-set (BUILD_QT_TOOLS_DESCR "Indicates whether OCCT tools should be build or not")
-
-set (USE_QT_TOOLS_DESCR "Indicates whether OCCT tools should be used or not
-The tools will be searched in third-party directory or may be set manually")
-
 macro (BUILD_MODULE MODULE_NAME)
   set (ENABLE_MODULE TRUE)
   set (BUILD_MODULE_${MODULE_NAME} ${ENABLE_MODULE} CACHE BOOL "${BUILD_MODULE_${MODULE_NAME}_DESCR}")

adm/cmake/vtk.cmake

@@ -1,8 +1,8 @@
 # vtk
 
-#if (NOT DEFINED INSTALL_VTK)
-#  set (INSTALL_VTK OFF CACHE BOOL "${INSTALL_VTK_DESCR}")
-#endif()
+if (NOT DEFINED INSTALL_VTK)
+  set (INSTALL_VTK OFF CACHE BOOL "${INSTALL_VTK_DESCR}")
+endif()
 
 # vtk directory
 if (NOT DEFINED 3RDPARTY_VTK_DIR)
@@ -31,7 +31,7 @@ if (NOT DEFINED 3RDPARTY_VTK_INCLUDE_DIR)
   set (3RDPARTY_VTK_INCLUDE_DIR "" CACHE PATH "The directory containing headers of VTK")
 endif()
 
-if (BUILD_SHARED_LIBS)
+#if (BUILD_SHARED_LIBS)
   # vtk library directory
   if (NOT DEFINED 3RDPARTY_VTK_LIBRARY_DIR)
     set (3RDPARTY_VTK_LIBRARY_DIR "" CACHE PATH "The directory containing VTK libraries")
@@ -41,7 +41,7 @@ if (BUILD_SHARED_LIBS)
   if (WIN32 AND NOT DEFINED 3RDPARTY_VTK_DLL_DIR)
     set (3RDPARTY_VTK_DLL_DIR "" CACHE PATH "The directory containing VTK shared libraries")
   endif()
-endif()
+#endif()
 
 # check 3RDPARTY_VTK_ paths for consistency with specified 3RDPARTY_VTK_DIR
 if (3RDPARTY_VTK_DIR AND EXISTS "${3RDPARTY_VTK_DIR}")
@@ -75,10 +75,10 @@ if (VTK_FOUND)
 
     set (3RDPARTY_VTK_INCLUDE_DIRS)
 
-    if (BUILD_SHARED_LIBS)
+#    if (BUILD_SHARED_LIBS)
       set (3RDPARTY_VTK_LIBRARY_DIRS)
       set (3RDPARTY_VTK_DLL_DIRS)
-    endif()
+#    endif()
 
     foreach (VTK_LIBRARY ${VTK_LIBRARIES})
       string (REGEX MATCH "^vtk" IS_VTK_LIBRARY ${VTK_LIBRARY})
@@ -168,7 +168,7 @@ if (VTK_FOUND)
     set (3RDPARTY_VTK_INCLUDE_DIR "${3RDPARTY_VTK_INCLUDE_DIR}" CACHE PATH "The directory containing headers of VTK" FORCE)
   endif()
 
-  if (BUILD_SHARED_LIBS)
+#  if (BUILD_SHARED_LIBS)
     if (3RDPARTY_VTK_LIBRARY_DIRS)
       list (REMOVE_DUPLICATES 3RDPARTY_VTK_LIBRARY_DIRS)
       list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIRS})
@@ -186,7 +186,7 @@ if (VTK_FOUND)
         set (3RDPARTY_VTK_DLL_DIR "${3RDPARTY_VTK_DLL_DIR}" CACHE PATH "The directory containing VTK shared libraries" FORCE)
       endif()
     endif()
-  endif()
+#  endif()
 
 if (3RDPARTY_VTK_INCLUDE_DIR AND EXISTS "${3RDPARTY_VTK_INCLUDE_DIR}")
   list (APPEND 3RDPARTY_INCLUDE_DIRS ${3RDPARTY_VTK_INCLUDE_DIR})
@@ -198,23 +198,98 @@ if (BUILD_SHARED_LIBS)
   if (3RDPARTY_VTK_LIBRARY_DIR AND EXISTS "${3RDPARTY_VTK_LIBRARY_DIR}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIR})
   else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_VTK_LIBRARY_DIR)
   endif()
 
   if (WIN32)
     if (3RDPARTY_VTK_DLL_DIR OR EXISTS "${3RDPARTY_VTK_DLL_DIR}")
       list (APPEND 3RDPARTY_DLL_DIRS ${3RDPARTY_VTK_DLL_DIR})
     else()
-      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_DLL_DIR)
+      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_VTK_DLL_DIR)
     endif()
   endif()
 endif()
 
+# Install vtk library using vtk targets
+macro (OCCT_INSTALL_VTK VTK_LIBRARY_NAME)
+  # Check that input library name contains "vtk" prefix
+  string (REGEX MATCH "^vtk" IS_VTK_LIBRARY ${VTK_LIBRARY_NAME})
+  # Check that input library was not already installed
+  list (FIND OCCT_VTK_USED_TARGETS ${VTK_LIBRARY_NAME} VTK_LIBRARY_IS_USED)
+  if (BUILD_SHARED_LIBS AND INSTALL_VTK AND TARGET ${VTK_LIBRARY_NAME} AND VTK_LIBRARY_IS_USED EQUAL -1 AND IS_VTK_LIBRARY)
+    OCCT_MAKE_OS_WITH_BITNESS()
+
+    # Get configuration of vtk
+    get_target_property (TARGET_VTK_IMPORT_CONFS ${VTK_LIBRARY_NAME} IMPORTED_CONFIGURATIONS)
+    list (GET TARGET_VTK_IMPORT_CONFS 0 CHOSEN_IMPORT_CONF)
+
+    # Get dependencies for current input library
+    get_property(VTK_LIBRARY_PATH       TARGET ${VTK_LIBRARY_NAME} PROPERTY LOCATION)
+    get_property(VTK_DEPEND             TARGET ${VTK_LIBRARY_NAME} PROPERTY IMPORTED_LINK_DEPENDENT_LIBRARIES_${CHOSEN_IMPORT_CONF})
+    get_property(VTK_IMPORTED_INTERFACE TARGET ${VTK_LIBRARY_NAME} PROPERTY IMPORTED_LINK_INTERFACE_LIBRARIES_${CHOSEN_IMPORT_CONF})
+    get_property(VTK_INTERFACE          TARGET ${VTK_LIBRARY_NAME} PROPERTY INTERFACE_LINK_LIBRARIES)
+    list (APPEND VTK_DEPEND ${VTK_INTERFACE} ${VTK_IMPORTED_INTERFACE})
+
+    # Install
+    if (WIN32)
+      if (SINGLE_GENERATOR)
+        install (FILES "${VTK_LIBRARY_PATH}" DESTINATION "${INSTALL_DIR_BIN}")
+      else()
+        install (FILES "${VTK_LIBRARY_PATH}"
+                 CONFIGURATIONS Release
+                 DESTINATION "${INSTALL_DIR_BIN}")
+        install (FILES "${VTK_LIBRARY_PATH}"
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${INSTALL_DIR_BIN}i")
+        install (FILES "${VTK_LIBRARY_PATH}"
+                 CONFIGURATIONS Debug
+                 DESTINATION "${INSTALL_DIR_BIN}d")
+      endif()
+    else()
+      get_filename_component(3RDPARTY_VTK_LIBRARY_ABS ${VTK_LIBRARY_PATH} REALPATH)
+
+      if (SINGLE_GENERATOR)
+        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
+                 DESTINATION "${INSTALL_DIR_LIB}")
+      else()
+        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
+                 CONFIGURATIONS Release
+                 DESTINATION "${INSTALL_DIR_LIB}")
+        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${INSTALL_DIR_LIB}i")
+        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
+                 CONFIGURATIONS Debug
+                 DESTINATION "${INSTALL_DIR_LIB}d")
+      endif()
+    endif()
+
+    set (USED_3RDPARTY_VTK_DIR "")
+
+    # Mark current library as already installed
+    list (APPEND OCCT_VTK_USED_TARGETS ${VTK_LIBRARY_NAME})
+    set (OCCT_VTK_USED_TARGETS "${OCCT_VTK_USED_TARGETS}" CACHE INTERNAL "" FORCE)
+
+    # Recursively install all depended libraries
+    foreach(VTK_TARGET ${VTK_DEPEND})
+      OCCT_INSTALL_VTK(${VTK_TARGET})
+    endforeach()
+  endif()
+endmacro()
+
+if (NOT BUILD_SHARED_LIBS)
+  OCCT_CHECK_AND_UNSET(3RDPARTY_VTK_DLL_DIR)
+  OCCT_CHECK_AND_UNSET(3RDPARTY_VTK_LIBRARY_DIR)
+  OCCT_CHECK_AND_UNSET(INSTALL_VTK)
+endif()
+
 # the library directory for using by the executable
-if (WIN32)
-  set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_DLL_DIR})
-else()
-  set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_LIBRARY_DIR})
+if (NOT INSTALL_VTK)
+  if (WIN32)
+    set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_DLL_DIR})
+  else()
+    set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_LIBRARY_DIR})
+  endif()
 endif()
 
 OCCT_CHECK_AND_UNSET (VTK_INCLUDE_DIRS)

adm/genconf.tcl

@@ -139,12 +139,6 @@ proc wokdep:gui:UpdateList {} {
   wokdep:SearchFreeType  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   wokdep:SearchX11       anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   if { "$::HAVE_GLES2" == "true" } {
-    if { "$::HAVE_GL2PS" == "true" } {
-      lappend anIncErrs "Error: gl2ps can not be used with OpenGL ES"
-    }
-    if { "$::HAVE_D3D" == "true" } {
-      lappend anIncErrs "Error: Direct3D can not be used with OpenGL ES"
-    }
     wokdep:SearchEGL     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
     wokdep:SearchGLES    anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   }
@@ -154,9 +148,6 @@ proc wokdep:gui:UpdateList {} {
   if { "$::HAVE_FFMPEG" == "true" } {
     wokdep:SearchFFmpeg  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   }
-  if { "$::HAVE_GL2PS" == "true" } {
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "gl2ps" "gl2ps.h" "gl2ps" {"gl2ps"}
-  }
   if { "$::HAVE_TBB" == "true" } {
     wokdep:SearchTBB     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   }
@@ -418,8 +409,6 @@ entry         .myFrame.mySrchEntry     -textvariable PRODUCTS_PATH -width 80
 ttk::button   .myFrame.mySrchBrowseBtn -text "Browse" -command wokdep:gui:BrowsePartiesRoot
 checkbutton   .myFrame.myChecks.myFImageCheck   -offvalue "false" -onvalue "true" -variable HAVE_FREEIMAGE -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myFImageLbl     -text "Use FreeImage"
-checkbutton   .myFrame.myChecks.myGl2psCheck    -offvalue "false" -onvalue "true" -variable HAVE_GL2PS     -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myGl2psLbl      -text "Use GL2PS"
 checkbutton   .myFrame.myChecks.myTbbCheck      -offvalue "false" -onvalue "true" -variable HAVE_TBB       -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myTbbLbl        -text "Use Intel TBB"
 if { "$::tcl_platform(os)" != "Darwin" } {
@@ -548,9 +537,6 @@ if { "$::tcl_platform(os)" != "Darwin" } {
 grid .myFrame.myChecks.myZLibCheck     -row $aCheckRowIter -column 6 -sticky e
 grid .myFrame.myChecks.myZLibLbl       -row $aCheckRowIter -column 7 -sticky w
 
-grid .myFrame.myChecks.myGl2psCheck    -row $aCheckRowIter -column 8 -sticky e
-grid .myFrame.myChecks.myGl2psLbl      -row $aCheckRowIter -column 9 -sticky w
-
 grid .myFrame.myChecks.myQt4Check      -row $aCheckRowIter -column 10 -sticky e
 grid .myFrame.myChecks.myQt4Lbl        -row $aCheckRowIter -column 11 -sticky w
 

adm/genconfdeps.tcl

@@ -65,7 +65,7 @@ if { [info exists ::env(SHORTCUT_HEADERS)] } {
 }
 
 # fetch environment variables (e.g. set by custom.sh or custom.bat) and set them as tcl variables with the same name
-set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_GL2PS HAVE_ZLIB HAVE_LIBLZMA HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
+set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_ZLIB HAVE_LIBLZMA HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
 foreach anEnvIter $THE_ENV_VARIABLES {
   set ${anEnvIter} "false"
   if { [info exists ::env(${anEnvIter})] } {

adm/gendoc.tcl

@@ -655,6 +655,8 @@ proc OCCDoc_Main {docType {docfiles {}} {modules {}} generatorMode verboseMode s
 
 # Generates Doxygen configuration file for Overview documentation
 proc OCCDoc_MakeDoxyfile {docType outDir tagFileDir {doxyFileName} {generatorMode ""} {DocFilesList {}} {ModulesList {}} verboseMode searchMode hhcPath mathjaxLocation graphvizPath productsPath} {
+  global module_dependency
+
   set inputDir      [OCCDoc_GetDoxDir [OCCDoc_GetProdRootDir]]
 
   set TEMPLATES_DIR [OCCDoc_GetDoxDir]/resources
@@ -725,6 +727,16 @@ proc OCCDoc_MakeDoxyfile {docType outDir tagFileDir {doxyFileName} {generatorMod
       set name OCCT
     }
 
+    OCCDoc_LoadData "${productsPath}"
+
+    # Add all dependencies of modules to the graph
+    set additional_modules {}
+    foreach module $modules {
+      set additional_modules [list {*}$additional_modules {*}$module_dependency($module)]
+    }
+    set modules [list {*}$modules {*}$additional_modules]
+    set modules [lsort -unique $modules]
+
     # Get list of header files in the specified modules
     set filelist {}
     foreach module $modules {

adm/genproj.tcl

@@ -26,7 +26,7 @@ set path [file normalize .]
 set THE_CASROOT ""
 set fBranch ""
 if { [info exists ::env(CASROOT)] } {
-  set THE_CASROOT "$::env(CASROOT)"
+  set THE_CASROOT [file normalize "$::env(CASROOT)"]
 }
 
 proc _get_options { platform type branch } {
@@ -344,6 +344,22 @@ proc genproj {theFormat args} {
   genAllResources
 }
 
+# copy file providing warning if the target file exists and has 
+# different date or size; if it is newer than source, save it as .bak
+proc copy_with_warning {from to} {
+  if { [file exists "$to"] &&
+      ([file size   "$to"] != [file size  "$from"] ||
+       [file mtime  "$to"] != [file mtime "$from"]) } {
+    puts "Warning: file $to is updated (copied from $from)!"
+    if { [file mtime $to] > [file mtime $from] } {
+      puts "Info: old content of file $to is saved in ${to}.bak"
+      file copy -force -- "$to" "${to}.bak"
+    }
+  }
+
+  file copy -force -- "$from" "$to"
+}
+
 proc genprojbat {theFormat thePlatform} {
   set aTargetPlatformExt sh
   if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
@@ -369,11 +385,11 @@ proc genprojbat {theFormat thePlatform} {
       close $anEnvFile
     }
 
-    file copy -force -- "$::THE_CASROOT/adm/templates/draw.${aTargetPlatformExt}" "$::path/draw.${aTargetPlatformExt}"
+    copy_with_warning "$::THE_CASROOT/adm/templates/draw.${aTargetPlatformExt}" "$::path/draw.${aTargetPlatformExt}"
   }
 
   if { [regexp {^vc} $theFormat] } {
-    file copy -force -- "$::THE_CASROOT/adm/templates/msvc.bat" "$::path/msvc.bat"
+    copy_with_warning "$::THE_CASROOT/adm/templates/msvc.bat" "$::path/msvc.bat"
   } else {
     switch -exact -- "$theFormat" {
       "cbp"   {
@@ -1296,13 +1312,12 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
     } else {
       set aLibsMap(CSF_FreeImagePlus) "freeimage"
     }
+  } elseif { "$theOS" == "wnt" } {
+    set aLibsMap(CSF_FreeImagePlus) "windowscodecs"
   }
   if { "$::HAVE_FFMPEG" == "true" } {
     set aLibsMap(CSF_FFmpeg) "avcodec avformat swscale avutil"
   }
-  if { "$::HAVE_GL2PS" == "true" } {
-    set aLibsMap(CSF_GL2PS) "gl2ps"
-  }
   if { "$::HAVE_TBB" == "true" } {
     set aLibsMap(CSF_TBB) "tbb tbbmalloc"
   }
@@ -1345,9 +1360,10 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
     # tbb headers define different pragma lib depending on debug/release
     set aLibsMap(CSF_TBB) ""
   } else {
+    set aLibsMap(CSF_dl)           "dl"
     if { "$theOS" == "mac" } {
       set aLibsMap(CSF_objc)       "objc"
-      set aFrmsMap(CSF_Appkit)     "Appkit"
+      set aFrmsMap(CSF_Appkit)     "AppKit"
       set aFrmsMap(CSF_IOKit)      "IOKit"
       set aFrmsMap(CSF_OpenGlLibs) "OpenGL"
       set aFrmsMap(CSF_TclLibs)    "Tcl"
@@ -1708,7 +1724,7 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
   regsub -all -- {__TKDEP__} $theProjTmpl $aUsedLibs theProjTmpl
 
   set anIncPaths "..\\..\\..\\inc"
-  set aTKDefines ""
+#  set aTKDefines ""
   set aFilesSection ""
   set aVcFilesX(units) ""
   set listloc [osutils:tk:units $theToolKit]
@@ -1775,13 +1791,13 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
     }
 
     # macros
-    append aTKDefines ";__${xlo}_DLL"
+#    append aTKDefines ";__${xlo}_DLL"
     # common includes
 #    append anIncPaths ";..\\..\\..\\src\\${xlo}"
   }
 
   regsub -all -- {__TKINC__}  $theProjTmpl $anIncPaths theProjTmpl
-  regsub -all -- {__TKDEFS__} $theProjTmpl $aTKDefines theProjTmpl
+#  regsub -all -- {__TKDEFS__} $theProjTmpl $aTKDefines theProjTmpl
   regsub -all -- {__FILES__}  $theProjTmpl $aFilesSection theProjTmpl
 
   # write file
@@ -1847,6 +1863,7 @@ proc osutils:tk:files { tkloc thePlatform } {
          "t" { set utyp "toolkit" }
          "n" { set utyp "nocdlpack" }
          "x" { set utyp "executable" }
+         default { error "Error: Cannot determine type of unit $loc, check adm/UDLIST!" }
     }
     if [array exists map] { unset map }
     osutils:tk:loadunit $loc map
@@ -1928,10 +1945,10 @@ proc osutils:vcprojx { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
       puts "Warning : in vcproj there are than one occurences for [file tail $f]"
     }
     #puts "$aProjTmpl $aFilesSection"
-    set aTKDefines ";__${theToolKit}_DLL"
+#    set aTKDefines ";__${theToolKit}_DLL"
     set anIncPaths "..\\..\\..\\inc"
     regsub -all -- {__TKINC__}  $aProjTmpl $anIncPaths    aProjTmpl
-    regsub -all -- {__TKDEFS__} $aProjTmpl $aTKDefines    aProjTmpl
+#    regsub -all -- {__TKDEFS__} $aProjTmpl $aTKDefines    aProjTmpl
     regsub -all -- {__FILES__}  $aProjTmpl $aFilesSection aProjTmpl
     regsub -all -- {__CONF__}   $aProjTmpl Application    aProjTmpl
 
@@ -2143,9 +2160,9 @@ proc osutils:cbptk { theCmpl theOutDir theToolKit thePlatform} {
     }
 
     # macros for correct DLL exports
-    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
-      lappend aTKDefines "__${xlo}_DLL"
-    }
+#    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
+#      lappend aTKDefines "__${xlo}_DLL"
+#    }
   }
 
   return [osutils:cbp $theCmpl $theOutDir $theToolKit $thePlatform $aTKSrcFiles $aUsedLibs $aFrameworks $anIncPaths $aTKDefines]
@@ -2262,9 +2279,9 @@ proc osutils:cbpx { theCmpl theOutDir theToolKit thePlatform } {
     }
 
     # macros for correct DLL exports
-    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
-      lappend aTKDefines "__${theToolKit}_DLL"
-    }
+#    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
+#      lappend aTKDefines "__${theToolKit}_DLL"
+#    }
 
     # common include paths
     lappend anIncPaths "../../../inc"

adm/svgdiff.bat

@@ -0,0 +1,31 @@
+@echo off
+rem Script to diff SVG images visually (as PNG) in TortoiseGit client
+rem 
+rem It assumes that Inkscape and TortoiseGitIDiff executables are either 
+rem installed in default locations in Program Files, or are accessible by PATH
+rem 
+rem To use this script for diffing SVG images, open TortoiseGit settings
+rem (Start -> Programs -> TortoiseGit -> Settings), select "Diff Viewer",
+rem click button "Advanced..." on the right tab and then add new record:
+rem - Extension: .svg
+rem - External program: <path to OCCT>\adm\svgdiff.bat %base %mine %bname %yname
+
+rem Remove double quotes around arguments
+set "f1=%1"
+set "f2=%2"
+set "f1=%f1:~1,-1%.png"
+set "f2=%f2:~1,-1%.png"
+
+rem Check if Inkscape and TortoiseGit are installed in default locations in 
+rem ProgramFiles; if not, assume they still may be accessible by PATH
+set "inkscape=%ProgramFiles%\Inkscape\inkscape.exe"
+if not exist "%inkscape%" set inkscape=inkscape.exe
+set "tgitidiff=%ProgramFiles%\TortoiseGit\bin\TortoiseGitIDiff.exe"
+if not exist "%tgitidiff%" set tgitidiff=TortoiseGitIDiff.exe
+
+rem Convert SVG to PNG using Inkscape
+"%inkscape%" -e "%f1%" %1
+"%inkscape%" -e "%f2%" %2
+
+rem Call Tortoise differ
+"%tgitidiff%" /left:"%f1%" /right:"%f2%" /lefttitle:%3 /righttitle:%4

adm/templates/OpenCASCADEConfig.cmake.in

@@ -58,7 +58,6 @@ set (OpenCASCADE_BUILD_SHARED_LIBS @BUILD_SHARED_LIBS@)
 set (OpenCASCADE_WITH_TCL       @USE_TCL@)
 set (OpenCASCADE_WITH_FREETYPE  @USE_FREETYPE@)
 set (OpenCASCADE_WITH_FREEIMAGE @USE_FREEIMAGE@)
-set (OpenCASCADE_WITH_GL2PS     @USE_GL2PS@)
 set (OpenCASCADE_WITH_TBB       @USE_TBB@)
 set (OpenCASCADE_WITH_VTK       @USE_VTK@)
 set (OpenCASCADE_WITH_FFMPEG    @USE_FFMPEG@)

adm/templates/TInspectorEXE.vcxproj.user.in

@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@X_COMPILER_BITNESS@'">
+  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
+CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
+QTDIR=@3RDPARTY_QT_DIR@
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@;%PATH%
+ </LocalDebuggerEnvironment>
+ <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
+ <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='RelWithDebInfo|@X_COMPILER_BITNESS@'">
+  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
+CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
+QTDIR=@3RDPARTY_QT_DIR@
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@i;%PATH%
+ </LocalDebuggerEnvironment>
+ <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
+ <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@X_COMPILER_BITNESS@'">
+  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
+CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
+QTDIR=@3RDPARTY_QT_DIR@
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@d;%PATH%
+ </LocalDebuggerEnvironment>
+ <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
+ <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
+ </PropertyGroup>
+</Project>

adm/templates/custom.build.bat.in

@@ -11,7 +11,6 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "FREEIMAGE_DIR=@3RDPARTY_FREEIMAGE_DLL_DIRS@"
     set "EGL_DIR=@3RDPARTY_EGL_DLL_DIRS@"
     set "GLES2_DIR=@3RDPARTY_GLES2_DLL_DIRS@"
-    set "GL2PS_DIR=@3RDPARTY_GL2PS_DLL_DIRS@"
     set "TBB_DIR=@3RDPARTY_TBB_DLL_DIR@"
     set "VTK_DIR=@3RDPARTY_VTK_DLL_DIR@"
     set "FFMPEG_DIR=@3RDPARTY_FFMPEG_DLL_DIR@"

adm/templates/custom.build.sh.in

@@ -9,7 +9,6 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TK_DIR="@3RDPARTY_TK_LIBRARY_DIR@"
     export FREETYPE_DIR="@3RDPARTY_FREETYPE_LIBRARY_DIR@"
     export FREEIMAGE_DIR="@3RDPARTY_FREEIMAGE_LIBRARY_DIRS@"
-    export GL2PS_DIR="@3RDPARTY_GL2PS_LIBRARY_DIRS@"
     export TBB_DIR="@3RDPARTY_TBB_LIBRARY_DIR@"
     export VTK_DIR="@3RDPARTY_VTK_LIBRARY_DIR@"
     export FFMPEG_DIR="@3RDPARTY_FFMPEG_LIBRARY_DIR@"

adm/templates/custom.install.bat.in

@@ -13,7 +13,6 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "FREEIMAGE_DIR=@USED_3RDPARTY_FREEIMAGE_DIRS@"
     set "EGL_DIR=@USED_3RDPARTY_EGL_DIRS@"
     set "GLES2_DIR=@USED_3RDPARTY_GLES2_DIRS@"
-    set "GL2PS_DIR=@USED_3RDPARTY_GL2PS_DIRS@"
     set "TBB_DIR=@USED_3RDPARTY_TBB_DIR@"
     set "VTK_DIR=@USED_3RDPARTY_VTK_DIR@"
     set "FFMPEG_DIR=@USED_3RDPARTY_FFMPEG_DIR@"
@@ -24,18 +23,15 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "TCL_VERSION_WITH_DOT=@3RDPARTY_TCL_LIBRARY_VERSION_WITH_DOT@"
     set "TK_VERSION_WITH_DOT=@3RDPARTY_TK_LIBRARY_VERSION_WITH_DOT@"
 
-    set "CSF_OCCTBinPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_BIN@%3"
-    set "CSF_OCCTLibPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_LIB@%3"
+    set "CSF_OCCTBinPath=%CASROOT%/@INSTALL_DIR_BIN@%3"
+    set "CSF_OCCTLibPath=%CASROOT%/@INSTALL_DIR_LIB@%3"
 
-    set "CSF_OCCTIncludePath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_INCLUDE@"
-    set "CSF_OCCTResourcePath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_RESOURCE@"
-    set "CSF_OCCTDataPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DATA@"
-    set "CSF_OCCTSamplesPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_SAMPLES@"
-    set "CSF_OCCTTestsPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_TESTS@"
-    set "CSF_OCCTDocPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DOC@"
-
-    rem for compatability with external application using CASROOT
-    set "CASROOT=@INSTALL_DIR_ABSOLUTE@"
+    set "CSF_OCCTIncludePath=%CASROOT%/@INSTALL_DIR_INCLUDE@"
+    set "CSF_OCCTResourcePath=%CASROOT%/@INSTALL_DIR_RESOURCE@"
+    set "CSF_OCCTDataPath=%CASROOT%/@INSTALL_DIR_DATA@"
+    set "CSF_OCCTSamplesPath=%CASROOT%/@INSTALL_DIR_SAMPLES@"
+    set "CSF_OCCTTestsPath=%CASROOT%/@INSTALL_DIR_TESTS@"
+    set "CSF_OCCTDocPath=%CASROOT%/@INSTALL_DIR_DOC@"
   )
 )
 

adm/templates/custom.install.sh.in

@@ -9,7 +9,6 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TK_DIR="@USED_3RDPARTY_TK_DIR@"
     export FREETYPE_DIR="@USED_3RDPARTY_FREETYPE_DIR@"
     export FREEIMAGE_DIR="@USED_3RDPARTY_FREEIMAGE_DIRS@"
-    export GL2PS_DIR="@USED_3RDPARTY_GL2PS_DIRS@"
     export TBB_DIR="@USED_3RDPARTY_TBB_DIR@"
     export VTK_DIR="@USED_3RDPARTY_VTK_DIR@"
     export FFMPEG_DIR="@USED_3RDPARTY_FFMPEG_DIR@"
@@ -21,17 +20,14 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TCL_VERSION_WITH_DOT="@3RDPARTY_TCL_LIBRARY_VERSION_WITH_DOT@"
     export TK_VERSION_WITH_DOT="@3RDPARTY_TK_LIBRARY_VERSION_WITH_DOT@"
 
-    export CSF_OCCTBinPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_BIN@"
-    export CSF_OCCTLibPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_LIB@"
-    export CSF_OCCTIncludePath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_INCLUDE@"
-    export CSF_OCCTResourcePath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_RESOURCE@"
-    export CSF_OCCTDataPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DATA@"
-    export CSF_OCCTSamplesPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_SAMPLES@"
-    export CSF_OCCTTestsPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_TESTS@"
-    export CSF_OCCTDocPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DOC@"
-    
-    # for compatability with external application using CASROOT
-    export CASROOT="@INSTALL_DIR_ABSOLUTE@"
+    export CSF_OCCTBinPath="${CASROOT}/@INSTALL_DIR_BIN@"
+    export CSF_OCCTLibPath="${CASROOT}/@INSTALL_DIR_LIB@"
+    export CSF_OCCTIncludePath="${CASROOT}/@INSTALL_DIR_INCLUDE@"
+    export CSF_OCCTResourcePath="${CASROOT}/@INSTALL_DIR_RESOURCE@"
+    export CSF_OCCTDataPath="${CASROOT}/@INSTALL_DIR_DATA@"
+    export CSF_OCCTSamplesPath="${CASROOT}/@INSTALL_DIR_SAMPLES@"
+    export CSF_OCCTTestsPath="${CASROOT}/@INSTALL_DIR_TESTS@"
+    export CSF_OCCTDocPath="${CASROOT}/@INSTALL_DIR_DOC@"
   fi
 fi
 

adm/templates/dfbrowser.bat

@@ -1,7 +0,0 @@
-@echo off
-
-rem Setup environment and launch TInspector
-call "%~dp0env.bat" %1 %2 %3
-
-TInspectorEXE.exe --dfbrowser
-

adm/templates/env.bat

@@ -19,7 +19,6 @@ set "HAVE_TBB=false"
 set "HAVE_OPENCL=false"
 set "HAVE_FREEIMAGE=false"
 set "HAVE_FFMPEG=false"
-set "HAVE_GL2PS=false"
 set "HAVE_VTK=false"
 set "HAVE_GLES2=false"
 set "HAVE_D3D=false"
@@ -31,14 +30,14 @@ set "CSF_OPT_LIB64="
 set "CSF_OPT_BIN32="
 set "CSF_OPT_BIN64="
 
-rem ----- Load local settings -----
-if exist "%~dp0custom.bat" (
-  call "%~dp0custom.bat" %1 %2 %3 %4 %5
-)
-
 if not ["%CASROOT%"] == [""] if exist "%SCRIPTROOT%\%CASROOT%" set "CASROOT=%SCRIPTROOT%\%CASROOT%"
 if     ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
 
+rem ----- Load local settings -----
+if exist "%CASROOT%\custom.bat" (
+  call "%CASROOT%\custom.bat" %1 %2 %3 %4 %5
+)
+
 rem ----- Read script arguments (override local settings) -----
 if not ["%1"]    == [""]      set "VCVER=%1"
 if not ["%2"]    == [""]      set "ARCH=%2"
@@ -49,14 +48,41 @@ if /I ["%3"]     == ["d"]     set "CASDEB=d"
 if /I ["%3"]     == ["i"]     set "CASDEB=i"
 if /I ["%3"]     == ["relwithdeb"] set "CASDEB=i"
 
-rem Decode VCVER
-call "%~dp0adm\vcver.bat"
+rem Decode VCVER variable and define related ones:
+rem
+rem VCFMT - "vc" followed by full version number of Visual Studio toolset
+rem         (same as VCVER without optional suffix "-uwp")
+rem VCLIB - name of folder contining binaries
+rem         (same as VCVER except without third version in number)
+rem VCPROP - name of required Visual Studion Workload (starting with VS 2017)
+rem
+rem Note that for VS before 2015 (vc14) always
+rem VCFMT=VCLIB=VCVER and VCPROP=NativeDesktop
+
+rem Since VS 2017, environment variables like VS100COMNTOOLS are not defined 
+rem any more, we can only use vswhere.exe tool to find Visual Studio.
+rem Add path to vswhere.exe
+set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
+
+rem for vc10-12, interpretation is trivial
+set VCFMT=%VCVER%
+set VCLIB=%VCVER:~0,4%
+set VCPROP=NativeDesktop
+rem vc14 and later can have optional suffix "-uwp"
+if "%VCVER:~-4%" == "-uwp" (
+  set VCFMT=%VCVER:~0,-4%
+  set VCLIB=%VCLIB%-uwp
+  set VCPROP=Universal
+)
+rem echo VCVER=%VCVER% VCFMT=%VCFMT% VCLIB=%VCLIB% VCPROP=%VCPROP%
 
 rem ----- Parsing of Visual Studio platform -----
 set "VisualStudioExpressName=VCExpress"
 
 if not "%DevEnvDir%" == "" (
   rem If DevEnvDir is already defined (e.g. in custom.bat), use that value
+) else if /I "%VCFMT%" == "vc9" (
+  set "DevEnvDir=%VS90COMNTOOLS%..\IDE"
 ) else if /I "%VCFMT%" == "vc10" (
   set "DevEnvDir=%VS100COMNTOOLS%..\IDE"
 ) else if /I "%VCFMT%" == "vc11" (
@@ -73,13 +99,25 @@ if not "%DevEnvDir%" == "" (
   for /f "usebackq delims=" %%i in (`vswhere.exe -version "[15.0,15.99]" -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
     set "DevEnvDir=%%i\Common7\IDE\"
   )
+) else if /I "%VCFMT%" == "gcc" (
+  rem MinGW
 ) else (
-  echo Error: wrong VS identifier
+  echo Error: first argument ^(%VCVER%^) should specify supported version of Visual C++, 
+  echo one of: 
+  echo vc9   = VS 2008 ^(SP1^)
+  echo vc10  = VS 2010 ^(SP3^)
+  echo vc11  = VS 2012 ^(SP3^)
+  echo vc12  = VS 2013 ^(SP3^)
+  echo vc14  = VS 2015
+  echo vc141 = VS 2017
   exit /B
 )
 
 rem ----- Parsing vcvarsall for qt samples and define PlatformToolset -----
-if /I "%VCFMT%" == "vc10" (
+if /I "%VCFMT%" == "vc9" (
+  set "VCVARS=%VS90COMNTOOLS%..\..\VC\vcvarsall.bat"
+  set "VCPlatformToolSet=v90"
+) else if /I "%VCFMT%" == "vc10" (
   set "VCVARS=%VS100COMNTOOLS%..\..\VC\vcvarsall.bat"
   set "VCPlatformToolSet=v100"
 ) else if /I "%VCFMT%" == "vc11" (
@@ -96,10 +134,11 @@ if /I "%VCFMT%" == "vc10" (
     set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
   )
   set "VCPlatformToolSet=v141"
+) else if /I "%VCFMT%" == "gcc" (
+  rem MinGW
 ) else (
-  echo Error: first argument ^(%VCVER%^) should specify supported version of Visual C++,
-  echo one of: vc10 ^(VS 2010 SP3^), vc11 ^(VS 2012 SP3^), vc12 ^(VS 2013^) or vc14 ^(VS 2015^)
-  exit
+  echo Error: wrong VS identifier
+  exit /B
 )
 
 set "CSF_OPT_LIB32D=%CSF_OPT_LIB32%"
@@ -116,7 +155,6 @@ set "CSF_OPT_CMPL="
 set "PRODUCTS_DEFINES="
 if ["%HAVE_TBB%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_TBB"       & set "CSF_DEFINES=HAVE_TBB;%CSF_DEFINES%"
 if ["%HAVE_OPENCL%"]    == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_OPENCL"    & set "CSF_DEFINES=HAVE_OPENCL;%CSF_DEFINES%"
-if ["%HAVE_GL2PS%"]     == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_GL2PS"     & set "CSF_DEFINES=HAVE_GL2PS;%CSF_DEFINES%"
 if ["%HAVE_FREEIMAGE%"] == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_FREEIMAGE" & set "CSF_DEFINES=HAVE_FREEIMAGE;%CSF_DEFINES%"
 if ["%HAVE_FFMPEG%"]    == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_FFMPEG"    & set "CSF_DEFINES=HAVE_FFMPEG;%CSF_DEFINES%"
 if ["%HAVE_VTK%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_VTK"       & set "CSF_DEFINES=HAVE_VTK;%CSF_DEFINES%"

adm/templates/env.bat.in

@@ -31,7 +31,9 @@ rem VCFMT=VCLIB=VCVER and VCPROP=NativeDesktop
 rem Since VS 2017, environment variables like VS100COMNTOOLS are not defined 
 rem any more, we can only use vswhere.exe tool to find Visual Studio.
 rem Add path to vswhere.exe
-set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
+if /I not "%VCFMT%" == "gcc" (
+  set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
+)
 
 rem for vc10-12, interpretation is trivial
 set VCFMT=%VCVER%
@@ -50,6 +52,8 @@ set "VisualStudioExpressName=VCExpress"
 
 if not "%DevEnvDir%" == "" (
   rem If DevEnvDir is already defined (e.g. in custom.bat), use that value
+) else if /I "%VCFMT%" == "vc9" (
+  set "DevEnvDir=%VS90COMNTOOLS%..\IDE"
 ) else if /I "%VCFMT%" == "vc10" (
   set "DevEnvDir=%VS100COMNTOOLS%..\IDE"
 ) else if /I "%VCFMT%" == "vc11" (
@@ -66,13 +70,18 @@ if not "%DevEnvDir%" == "" (
   for /f "usebackq delims=" %%i in (`vswhere.exe -version "[15.0,15.99]" -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
     set "DevEnvDir=%%i\Common7\IDE\"
   )
+) else if /I "%VCFMT%" == "gcc" (
+  rem MinGW
 ) else (
   echo Error: wrong VS identifier
   exit /B
 )
 
 rem ----- Parsing vcvarsall for qt samples and define PlatformToolset -----
-if /I "%VCFMT%" == "vc10" (
+if /I "%VCFMT%" == "vc9" (
+  set "VCVARS=%VS90COMNTOOLS%..\..\VC\vcvarsall.bat"
+  set "VCPlatformToolSet=v90"
+) else if /I "%VCFMT%" == "vc10" (
   set "VCVARS=%VS100COMNTOOLS%..\..\VC\vcvarsall.bat"
   set "VCPlatformToolSet=v100"
 ) else if /I "%VCFMT%" == "vc11" (
@@ -89,30 +98,34 @@ if /I "%VCFMT%" == "vc10" (
     set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
   )
   set "VCPlatformToolSet=v141"
+) else if /I "%VCFMT%" == "gcc" (
+  rem MinGW
 ) else (
   echo Error: first argument ^(%VCVER%^) should specify supported version of Visual C++,
   echo one of: vc10 ^(VS 2010 SP3^), vc11 ^(VS 2012 SP3^), vc12 ^(VS 2013^) or vc14 ^(VS 2015^)
   exit
 )
 
+rem ----- For compatability with external application using CASROOT -----
+if ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
+
+rem ----- Define path to 3rdparty products -----
+set "THIRDPARTY_DIR=@3RDPARTY_DIR@"
+
 if ["%ARCH%"] == ["32"] set VCARCH=x86
 if ["%ARCH%"] == ["64"] set VCARCH=amd64
 
 if /I ["%1"] == ["vc141"] set "VCVER=vc14"
-if exist "%~dp0custom.bat" (
-  call "%~dp0custom.bat" %VCVER% %ARCH% %CASDEB%
+if exist "%CASROOT%\custom.bat" (
+  call "%CASROOT%\custom.bat" %VCVER% %ARCH% %CASDEB%
 )
 
-rem for compatability with external application using CASROOT
-if ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
-
 if not ["%TCL_DIR%"] == [""]           set "PATH=%TCL_DIR%;%PATH%"
 if not ["%TK_DIR%"] == [""]            set "PATH=%TK_DIR%;%PATH%"
 if not ["%FREETYPE_DIR%"] == [""]      set "PATH=%FREETYPE_DIR%;%PATH%"
 if not ["%FREEIMAGE_DIR%"] == [""]     set "PATH=%FREEIMAGE_DIR%;%PATH%"
 if not ["%EGL_DIR%"] == [""]           set "PATH=%EGL_DIR%;%PATH%"
 if not ["%GLES2_DIR%"] == [""]         set "PATH=%GLES2_DIR%;%PATH%"
-if not ["%GL2PS_DIR%"] == [""]         set "PATH=%GL2PS_DIR%;%PATH%"
 if not ["%TBB_DIR%"] == [""]           set "PATH=%TBB_DIR%;%PATH%"
 if not ["%VTK_DIR%"] == [""]           set "PATH=%VTK_DIR%;%PATH%"
 if not ["%FFMPEG_DIR%"] == [""]        set "PATH=%FFMPEG_DIR%;%PATH%"
@@ -146,7 +159,7 @@ set "CSF_STEPDefaults=%CSF_OCCTResourcePath%\XSTEPResource"
 set "CSF_XmlOcafResource=%CSF_OCCTResourcePath%\XmlOcafResource"
 set "CSF_MIGRATION_TYPES=%CSF_OCCTResourcePath%\StdResource\MigrationSheet.txt"
 
-rem Draw Harness special stuff
+rem ----- Draw Harness special stuff -----
 if exist "%CSF_OCCTResourcePath%\DrawResources" (
   set "DRAWHOME=%CSF_OCCTResourcePath%\DrawResources"
   set "CSF_DrawPluginDefaults=%CSF_OCCTResourcePath%\DrawResources"

adm/templates/env.sh

@@ -11,7 +11,6 @@ export HAVE_TBB="false";
 export HAVE_OPENCL="false";
 export HAVE_FREEIMAGE="false";
 export HAVE_FFMPEG="false";
-export HAVE_GL2PS="false";
 export HAVE_VTK="false";
 export HAVE_GLES2="false";
 export HAVE_ZLIB="false";
@@ -24,15 +23,13 @@ export CSF_OPT_BIN32=""
 export CSF_OPT_BIN64=""
 
 # ----- Set local settings -----
-if [ "${CASROOT}" != "" ] && [ -e "${CASROOT}/custom.sh" ]; then source "${CASROOT}/custom.sh"; fi
-if [ -e "${aScriptPath}/custom.sh" ]; then source "${aScriptPath}/custom.sh"; fi
-
 if [ "${CASROOT}" != "" ] && [ -d "${aScriptPath}/${CASROOT}" ]; then
   export CASROOT="${aScriptPath}/${CASROOT}"
 fi
 if [ "${CASROOT}" == "" ]; then
   export CASROOT="${aScriptPath}"
 fi
+if [ -e "${CASROOT}/custom.sh" ]; then source "${CASROOT}/custom.sh"; fi
 
 # Read script arguments
 shopt -s nocasematch
@@ -98,7 +95,6 @@ if [ "$HAVE_TBB"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -D
 if [ "$HAVE_OPENCL"    == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_OPENCL"; fi
 if [ "$HAVE_FREEIMAGE" == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_FREEIMAGE"; fi
 if [ "$HAVE_FFMPEG"    == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_FFMPEG"; fi
-if [ "$HAVE_GL2PS"     == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_GL2PS"; fi
 if [ "$HAVE_GLES2"     == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_GLES2"; fi
 if [ "$HAVE_VTK"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_VTK"; fi
 if [ "$HAVE_ZLIB"      == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_ZLIB"; fi

adm/templates/env.sh.in

@@ -2,12 +2,15 @@
 
 aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
 
-# ----- for compatability with external application using CASROOT -----
+# ----- For compatability with external application using CASROOT -----
 if [ "${CASROOT}" == "" ]; then
-  export CASROOT="${aScriptPath}"
+  export CASROOT="@INSTALL_DIR@"
 fi
 
-# Read script arguments
+# ----- Define path to 3rdparty products -----
+export THIRDPARTY_DIR="@3RDPARTY_DIR@"
+
+# ----- Read script arguments -----
 shopt -s nocasematch
 export CASDEB="";
 if [[ "$1" == "debug" ]]; then export CASDEB="d"; fi
@@ -33,8 +36,8 @@ else
 fi
 
 # ----- Set local settings -----
-if [ -e "${aScriptPath}/custom.sh" ]; then
-  source "${aScriptPath}/custom.sh" "${CASDEB}" "${ARCH}"
+if [ -e "${CASROOT}/@INSTALL_DIR_SCRIPT@/custom.sh" ]; then
+  source "${CASROOT}/@INSTALL_DIR_SCRIPT@/custom.sh" "${CASDEB}" "${ARCH}"
 fi
 
 THRDPARTY_PATH=""
@@ -54,10 +57,6 @@ if [ "$FREEIMAGE_DIR" != "" ]; then
   THRDPARTY_PATH="${FREEIMAGE_DIR}:${THRDPARTY_PATH}"
 fi
 
-if [ "$GL2PS_DIR" != "" ]; then
-  THRDPARTY_PATH="${GL2PS_DIR}:${THRDPARTY_PATH}"
-fi
-
 if [ "$TBB_DIR" != "" ]; then
   THRDPARTY_PATH="${TBB_DIR}:${THRDPARTY_PATH}"
 fi
@@ -127,7 +126,7 @@ export CSF_STEPDefaults="${CSF_OCCTResourcePath}/XSTEPResource"
 export CSF_XmlOcafResource="${CSF_OCCTResourcePath}/XmlOcafResource"
 export CSF_MIGRATION_TYPES="${CSF_OCCTResourcePath}/StdResource/MigrationSheet.txt"
 
-# Draw Harness special stuff
+# ----- Draw Harness special stuff -----
 if [ -e "${CSF_OCCTResourcePath}/DrawResources" ]; then
   export DRAWHOME="${CSF_OCCTResourcePath}/DrawResources"
   export CSF_DrawPluginDefaults="${CSF_OCCTResourcePath}/DrawResources"

adm/templates/inspector.bat

@@ -0,0 +1,17 @@
+@echo off
+
+rem Use:
+rem - first argument specifies version of Visual Studio (vc8, vc9, or vc10),
+rem - second argument specifies architecture (win32 or win64),
+rem - third argument specifies build mode (Debug or Release)
+rem - fourth and next arguments specify loaded tool plugins
+rem     The arguments are: dfbrowser shapeview vinspector
+rem     If there are no tool plugins are specified, all plugins will be loaded
+rem Default options are:
+rem   vc8 win32 Release
+
+rem Setup environment and launch TInspector
+call "%~dp0env.bat" %1 %2 %3
+
+TInspectorEXE.exe %*
+

adm/templates/inspector.sh

@@ -6,4 +6,4 @@ aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath
 source "${aScriptPath}/env.sh" "$1"
 
 cd ${aCurrentPath}
-TInspectorEXE --dfbrowser
+TInspectorEXE

adm/templates/sample.bat

@@ -16,11 +16,16 @@ if ["%1"] == [""] (
   echo    HLR
   echo    Animation
   echo    Convert
+  echo    AndroidQt
+  echo    FuncDemo
+  echo    IESample
+  echo    Tutorial
   PAUSE
   exit /B
 )
 
 call "%~dp0env.bat" %2 %3 %4
+if not ["%QTDIR%"] == [""] if exist "%QTDIR%\qml" if ["%QML2_IMPORT_PATH%"] == [""] set "QML2_IMPORT_PATH=%QTDIR%/qml"
 set "EXE_PATH=%CSF_OCCTBinPath%/%1.exe"
 
 if not exist "%EXE_PATH%" (

adm/templates/sample.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+
+if [ "$1" == "" ]; then
+  echo Launch selected sample as follows:
+  echo   sample.sh SampleName d
+  echo or to use last sample build configuration:
+  echo   sample.sh SampleName
+  echo available samples:
+  echo    FuncDemo
+  echo    IESample
+  echo    Tutorial
+fi
+
+
+aCurrentPath="$PWD"
+aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
+
+source "${aScriptPath}/env.sh" "$2"
+
+if test "${QTDIR}" == ""; then
+  if [ -d "$QTDIR%\qml" ];
+    then export QML2_IMPORT_PATH="$QTDIR\qml";
+  fi
+fi
+
+export "EXE_PATH=$CSF_OCCTBinPath/$1"
+
+if [ ! -f "$EXE_PATH" ]; then
+  echo "Executable \"$EXE_PATH\" not found."
+  echo "Probably you didn't compile the application."
+  exit 1
+fi
+
+cd ${aCurrentPath}
+"$EXE_PATH"

adm/templates/template.vc10

@@ -90,7 +90,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -107,7 +107,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
@@ -138,7 +138,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -156,7 +156,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
@@ -186,7 +186,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -203,7 +203,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
@@ -234,7 +234,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -252,7 +252,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>

adm/templates/template.vc10x

@@ -85,7 +85,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -100,7 +100,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
@@ -130,7 +130,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -146,7 +146,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
@@ -175,7 +175,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -190,7 +190,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
@@ -219,7 +219,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -235,7 +235,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>

adm/templates/template.vc7

@@ -22,7 +22,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 				StringPooling="TRUE"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="TRUE"
@@ -62,7 +62,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 				Culture="1036"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
@@ -89,7 +89,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
 				PrecompiledHeaderFile=".\..\..\..\win32\vc7\objd\__TKNAM__\__TKNAM__.pch"
@@ -131,7 +131,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 				Culture="1036"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>

adm/templates/template.vc7x

@@ -22,7 +22,7 @@
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
 				AssemblerListingLocation=".\..\..\..\win32\vc7\objd\__XQTNAM__/"
@@ -61,7 +61,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 				Culture="1033"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
@@ -86,7 +86,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 				StringPooling="TRUE"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="TRUE"
@@ -124,7 +124,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 				Culture="1033"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>

adm/templates/template.vc8

@@ -50,7 +50,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -70,7 +70,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 				Culture="1036"
 			/>
 			<Tool
@@ -148,7 +148,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -170,7 +170,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 				Culture="1036"
 			/>
 			<Tool
@@ -249,7 +249,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -268,7 +268,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 				Culture="1036"
 			/>
 			<Tool
@@ -347,7 +347,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -368,7 +368,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 				Culture="1036"
 			/>
 			<Tool

adm/templates/template.vc8x

@@ -49,7 +49,7 @@
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -68,7 +68,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__;"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES);"
 				Culture="1033"
 			/>
 			<Tool
@@ -145,7 +145,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -164,7 +164,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES);"
 				Culture="1033"
 			/>
 			<Tool
@@ -240,7 +240,7 @@
 				AdditionalOptions="/favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -258,7 +258,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 				Culture="1033"
 			/>
 			<Tool
@@ -337,7 +337,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -355,7 +355,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 				Culture="1033"
 			/>
 			<Tool

adm/templates/template.vc9

@@ -24,6 +24,7 @@
 			ConfigurationType="2"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
+			CharacterSet="1"
 			>
 			<Tool
 				Name="VCPreBuildEventTool"
@@ -52,7 +53,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -72,7 +73,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -120,7 +121,7 @@
 			ConfigurationType="2"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
-			ManagedExtensions="0"
+			CharacterSet="1"
 			>
 			<Tool
 				Name="VCPreBuildEventTool"
@@ -149,7 +150,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -171,7 +172,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -218,6 +219,7 @@
 			ConfigurationType="2"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
+			CharacterSet="1"
 			>
 			<Tool
 				Name="VCPreBuildEventTool"
@@ -246,7 +248,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -265,7 +267,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -311,7 +313,7 @@
 			ConfigurationType="2"
 			UseOfMFC="0"
 			ATLMinimizesCRunTimeLibraryUsage="false"
-			ManagedExtensions="0"
+			CharacterSet="1"
 			>
 			<Tool
 				Name="VCPreBuildEventTool"
@@ -340,7 +342,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -361,7 +363,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"

adm/templates/template.vc9x

@@ -52,7 +52,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -71,7 +71,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -143,7 +143,7 @@
 				AdditionalOptions="-MP"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -162,7 +162,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -236,7 +236,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -254,7 +254,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -327,7 +327,7 @@
 				AdditionalOptions="-MP -favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -345,7 +345,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"

adm/upgrade.dat

@@ -1,8 +1,76 @@
 [rename]
+Adaptor3d_OffsetCurve Adaptor2d_OffsetCurve
 BRepExtrema_OverlappedSubShapes BRepExtrema_MapOfIntegerPackedMapOfInteger
 ShapeConstruct_CompBezierCurves2dToBSplineCurve2d Convert_CompBezierCurves2dToBSplineCurve2d
 ShapeConstruct_CompBezierCurves2dToBSplineCurve Convert_CompBezierCurves2dToBSplineCurve
 Image_PixMap::Img Image_Format_
+V3d_TypeOfShadingModel Graphic3d_TypeOfShadingModel
+Graphic3d_TOSM_NONE Graphic3d_TOSM_UNLIT
+V3d_COLOR Graphic3d_TOSM_UNLIT
+V3d_FLAT Graphic3d_TOSM_FACET
+V3d_GOURAUD Graphic3d_TOSM_VERTEX
+V3d_PHONG Graphic3d_TOSM_FRAGMENT
+V3d_TypeOfLight Graphic3d_TypeOfLightSource
+V3d_AMBIENT Graphic3d_TOLS_AMBIENT
+V3d_DIRECTIONAL Graphic3d_TOLS_DIRECTIONAL
+V3d_POSITIONAL Graphic3d_TOLS_POSITIONAL
+V3d_SPOT Graphic3d_TOLS_SPOT
+BOPCol_BaseAllocator Handle(NCollection_BaseAllocator)
+BOPCol_BoxBndTree is replaced with BOPTools_BoxBndTree
+BOPCol_DataMapOfIntegerInteger TColStd_DataMapOfIntegerInteger
+BOPCol_DataMapOfIntegerListOfInteger TColStd_DataMapOfIntegerListOfInteger
+BOPCol_DataMapOfIntegerListOfShape TopTools_DataMapOfIntegerListOfShape
+BOPCol_DataMapOfIntegerReal TColStd_DataMapOfIntegerReal
+BOPCol_DataMapOfIntegerShape TopTools_DataMapOfIntegerShape
+BOPCol_DataMapOfShapeBox TopTools_DataMapOfShapeBox
+BOPCol_DataMapOfShapeInteger TopTools_DataMapOfShapeInteger
+BOPCol_DataMapOfShapeListOfShape TopTools_DataMapOfShapeListOfShape
+BOPCol_DataMapOfShapeReal TopTools_DataMapOfShapeReal
+BOPCol_DataMapOfShapeShape TopTools_DataMapOfShapeShape
+BOPCol_IndexedDataMapOfShapeListOfShape TopTools_IndexedDataMapOfShapeListOfShape
+BOPCol_IndexedDataMapOfShapeShape TopTools_IndexedDataMapOfShapeShape
+BOPCol_IndexedMapOfInteger TColStd_IndexedMapOfInteger
+BOPCol_IndexedMapOfOrientedShape TopTools_IndexedMapOfOrientedShape
+BOPCol_IndexedMapOfShape TopTools_IndexedMapOfShape
+BOPCol_ListOfInteger TColStd_ListOfInteger
+BOPCol_ListOfListOfShape TopTools_ListOfListOfShape
+BOPCol_ListOfShape TopTools_ListOfShape
+BOPCol_MapOfInteger TColStd_MapOfInteger
+BOPCol_MapOfOrientedShapeTopTools_MapOfOrientedShape
+BOPCol_MapOfShape TopTools_MapOfShape
+BOPCol_SequenceOfPnt2d TColgp_SequenceOfPnt2d
+BOPCol_SequenceOfReal TColStd_SequenceOfReal
+BOPCol_SequenceOfShape TopTools_SequenceOfShape 
+BOPCol_Parallel BOPTools_Parallel
+BOPCol_NCVector NCollection_Vector
+BOPCol_DataMapOfShapeAddress DataMapOfShapeAddress
+BOPCol_DataMapOfTransientAddress DataMapOfTransientAddress
+BOPCol_DataMapIteratorOfDataMapOfIntegerReal TColStd_DataMapIteratorOfDataMapOfIntegerReal
+BOPCol_DataMapIteratorOfDataMapOfShapeAddress DataMapOfShapeAddress::Iterator
+BOPCol_DataMapIteratorOfDataMapOfTransientAddress DataMapOfTransientAddress::Iterator
+BOPCol_ListIteratorOfListOfInteger TColStd_ListIteratorOfListOfInteger
+BOPCol_ListIteratorOfListOfShape TopTools_ListIteratorOfListOfShape
+BOPCol_MapIteratorOfMapOfInteger TColStd_MapIteratorOfMapOfInteger
+BOPCol_BoxBndTreeSelector BOPTools_BoxBndTreeSelector
+BOPCol_BoxBndTree BOPTools_BoxBndTree
+BOPCol_PListOfInteger TColStd_ListOfInteger*
+BOPCol_IndexedDataMapOfShapeReal TopTools_IndexedDataMapOfShapeReal
+BOPCol_MapOfOrientedShape TopTools_MapOfOrientedShape
+BOPCol_DataMapIteratorOfDataMapOfIntegerInteger TColStd_DataMapIteratorOfDataMapOfIntegerInteger
+BOPCol_MapIteratorOfMapOfShape TopTools_MapIteratorOfMapOfShape
+BOPCol_ContextFunctor BOPTools_ContextFunctor
+BOPCol_ContextCnt BOPTools_ContextCnt
+BOPCol_Functor BOPTools_Functor
+BOPCol_Cnt BOPTools_Cnt
+BOPCol_DataMapIteratorOfDataMapOfIntegerListOfShape TopTools_DataMapIteratorOfDataMapOfIntegerListOfShape
+BOPCol_MapIteratorOfMapOfOrientedShape TopTools_MapIteratorOfMapOfOrientedShape
+BOPCol_DataMapIteratorOfDataMapOfIntegerListOfInteger TColStd_DataMapIteratorOfDataMapOfIntegerListOfInteger
+BOPCol_DataMapIteratorOfDataMapOfShapeShape TopTools_DataMapIteratorOfDataMapOfShapeShape
+BOPTools::MapShapes TopExp::MapShapes
+BOPTools::MapShapesAndAncestors TopExp::MapShapesAndAncestors
+BOPCol_Box2DBndTreeSelector BOPTools_BoxSelector<Bnd_Box2d>
+BiTgte_DataMapOfShapeBox TopTools_DataMapOfShapeBox
+CDM_MessageDriver Message_Messenger
 
 [tcollection]
 AdvApp2Var_SequenceOfNode

adm/vcver.bat

@@ -1,30 +0,0 @@
-@echo off
-rem Decode VCVER variable and define related ones:
-rem
-rem VCFMT - "vc" followed by full version number of Visual Studio toolset
-rem         (same as VCVER without optional suffix "-uwp")
-rem VCLIB - name of folder contining binaries
-rem         (same as VCVER except without third version in number)
-rem VCPROP - name of required Visual Studion Workload (starting with VS 2017)
-rem
-rem Note that for VS before 2015 (vc14) always
-rem VCFMT=VCLIB=VCVER and VCPROP=NativeDesktop
-
-rem Since VS 2017, environment variables like VS100COMNTOOLS are not defined 
-rem any more, we can only use vswhere.exe tool to find Visual Studio.
-rem Add path to vswhere.exe
-set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
-
-rem for vc10-12, interpretation is trivial
-set VCFMT=%VCVER%
-set VCLIB=%VCVER:~0,4%
-set VCPROP=NativeDesktop
-
-rem vc14 and later can have optional suffix "-uwp"
-if "%VCVER:~-4%" == "-uwp" (
-  set VCFMT=%VCVER:~0,-4%
-  set VCLIB=%VCLIB%-uwp
-  set VCPROP=Universal
-)
-
-rem echo VCVER=%VCVER% VCFMT=%VCFMT% VCLIB=%VCLIB% VCPROP=%VCPROP%

data/occ/Box.brep

@@ -1,282 +0,0 @@
-DBRep_DrawableShape
-
-CASCADE Topology V1, (c) Matra-Datavision
-Locations 0
-Curve2ds 24
-1 0 0 1 0 
-1 0 0 1 0 
-1 50 0 0 -1 
-1 0 0 0 1 
-1 0 -80 1 0 
-1 0 0 1 0 
-1 0 0 0 -1 
-1 0 0 0 1 
-1 0 0 1 0 
-1 0 77 1 0 
-1 50 0 0 -1 
-1 77 0 0 1 
-1 0 -80 1 0 
-1 0 77 1 0 
-1 0 0 0 -1 
-1 77 0 0 1 
-1 0 0 0 1 
-1 0 0 1 0 
-1 50 0 0 1 
-1 0 0 1 0 
-1 0 0 0 1 
-1 0 80 1 0 
-1 50 0 0 1 
-1 0 80 1 0 
-Curves 12
-1 821 803 0 0 0 1 
-1 821 803 50 0 1 0 
-1 821 883 0 0 0 1 
-1 821 803 0 0 1 0 
-1 898 803 0 0 0 1 
-1 898 803 50 0 1 0 
-1 898 883 0 0 0 1 
-1 898 803 0 0 1 0 
-1 821 803 0 1 0 0 
-1 821 803 50 1 0 0 
-1 821 883 0 1 0 0 
-1 821 883 50 1 0 0 
-Polygon3D 0
-PolygonOnTriangulations 0
-Surfaces 6
-1 821 803 0 1 0 0 0 0 1 0 -1 0 
-1 821 803 0 0 1 0 0 0 1 1 0 0 
-1 821 803 50 0 0 1 1 0 0 0 1 0 
-1 821 883 0 0 1 0 0 0 1 1 0 0 
-1 821 803 0 0 0 1 1 0 0 0 1 0 
-1 898 803 0 1 0 0 0 0 1 0 -1 0 
-Triangulations 0
-
-TShapes 34
-Ve
-1e-007
-821 803 50
-0 0
-
-0101100
-*
-Ve
-1e-007
-821 803 0
-0 0
-
-0101100
-*
-Ed
- 1e-007 1 1 0
-1  1 0 0 50
-2  1 1 0 0 50
-2  2 2 0 0 50
-0
-
-0101000
--34 0 +33 0 *
-Ve
-1e-007
-821 883 50
-0 0
-
-0101100
-*
-Ed
- 1e-007 1 1 0
-1  2 0 0 80
-2  3 1 0 0 80
-2  4 3 0 0 80
-0
-
-0101000
--31 0 +34 0 *
-Ve
-1e-007
-821 883 0
-0 0
-
-0101100
-*
-Ed
- 1e-007 1 1 0
-1  3 0 0 50
-2  5 1 0 0 50
-2  6 4 0 0 50
-0
-
-0101000
--31 0 +29 0 *
-Ed
- 1e-007 1 1 0
-1  4 0 0 80
-2  7 1 0 0 80
-2  8 5 0 0 80
-0
-
-0101000
--29 0 +33 0 *
-Wi
-
-0101000
--32 0 -30 0 +28 0 +27 0 *
-Fa
-0  1e-007 1 0
-
-0111000
-+26 0 *
-Ve
-1e-007
-898 803 50
-0 0
-
-0101100
-*
-Ve
-1e-007
-898 803 0
-0 0
-
-0101100
-*
-Ed
- 1e-007 1 1 0
-1  5 0 0 50
-2  9 6 0 0 50
-2  10 2 0 0 50
-0
-
-0101000
--24 0 +23 0 *
-Ve
-1e-007
-898 883 50
-0 0
-
-0101100
-*
-Ed
- 1e-007 1 1 0
-1  6 0 0 80
-2  11 6 0 0 80
-2  12 3 0 0 80
-0
-
-0101000
--21 0 +24 0 *
-Ve
-1e-007
-898 883 0
-0 0
-
-0101100
-*
-Ed
- 1e-007 1 1 0
-1  7 0 0 50
-2  13 6 0 0 50
-2  14 4 0 0 50
-0
-
-0101000
--21 0 +19 0 *
-Ed
- 1e-007 1 1 0
-1  8 0 0 80
-2  15 6 0 0 80
-2  16 5 0 0 80
-0
-
-0101000
--19 0 +23 0 *
-Wi
-
-0101000
--22 0 -20 0 +18 0 +17 0 *
-Fa
-0  1e-007 6 0
-
-0111000
-+16 0 *
-Ed
- 1e-007 1 1 0
-1  9 0 0 77
-2  17 2 0 0 77
-2  18 5 0 0 77
-0
-
-0101000
--23 0 +33 0 *
-Ed
- 1e-007 1 1 0
-1  10 0 0 77
-2  19 2 0 0 77
-2  20 3 0 0 77
-0
-
-0101000
--24 0 +34 0 *
-Wi
-
-0101000
--14 0 -22 0 +13 0 +32 0 *
-Fa
-0  1e-007 2 0
-
-0111000
-+12 0 *
-Ed
- 1e-007 1 1 0
-1  11 0 0 77
-2  21 4 0 0 77
-2  22 5 0 0 77
-0
-
-0101000
--19 0 +29 0 *
-Ed
- 1e-007 1 1 0
-1  12 0 0 77
-2  23 4 0 0 77
-2  24 3 0 0 77
-0
-
-0101000
--21 0 +31 0 *
-Wi
-
-0101000
--10 0 -18 0 +9 0 +28 0 *
-Fa
-0  1e-007 4 0
-
-0111000
-+8 0 *
-Wi
-
-0101000
--27 0 -10 0 +17 0 +14 0 *
-Fa
-0  1e-007 5 0
-
-0111000
-+6 0 *
-Wi
-
-0101000
--30 0 -9 0 +20 0 +13 0 *
-Fa
-0  1e-007 3 0
-
-0111000
-+4 0 *
-Sh
-
-0101100
--25 0 +15 0 -11 0 +7 0 -5 0 +3 0 *
-So
-
-1100000
-+2 0 *
-
-+1 0 

dox/FILES_HTML.txt

@@ -13,6 +13,7 @@ overview/overview.md
 
 ../samples/qt/AndroidQt/ReadMe.md
 ../samples/java/jniviewer/ReadMe.md
+../samples/ios/UIKitSample/ReadMe.md
 
 tutorial/tutorial.md
 
@@ -31,6 +32,7 @@ user_guides/xde/xde.md
 user_guides/ocaf/ocaf.md
 user_guides/tobj/tobj.md
 user_guides/draw_test_harness/draw_test_harness.md
+user_guides/inspector/inspector.md
 user_guides/brep_wp/brep_wp.md
 user_guides/vis/vis.md
 

dox/FILES_PDF.txt

@@ -14,6 +14,7 @@ user_guides/shape_healing/shape_healing.md
 user_guides/ocaf/ocaf.md
 user_guides/step/step.md
 user_guides/draw_test_harness/draw_test_harness.md
+user_guides/inspector/inspector.md
 user_guides/tobj/tobj.md
 user_guides/visualization/visualization.md
 user_guides/xde/xde.md

dox/dev_guides/building/3rdparty/3rdparty_linux.md

@@ -19,7 +19,6 @@ There are two types of third-party products, which are  necessary to build OCCT:
 	* FreeType 2.4.10 - 2.5.3;
 * Optional  products: 
 	* TBB 3.x - 4.x;
-	* gl2ps 1.3.5 - 1.3.8;
 	* FreeImage 3.14.1 - 3.16.0;
 	* VTK 6.1.0.
 
@@ -108,32 +107,6 @@ This third-party product is  installed with binaries from the archive that can b
 Go to the **Download** page, find the  release version you need and pick the archive for Linux platform.
 To install, unpack the downloaded archive of TBB product.
 
-@subsection dev_guides__building_3rdparty_linux_3_2 gl2ps
-
-Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.
-  
-1. Install or build *cmake* product from the source file. 
-2. Start *cmake* in GUI mode with the directory where the source files of gl2ps are located:
-
-       ccmake GL2PS_SRC_DIR   
-
-   * Press <i>[c]</i> to make the  initial configuration; 
-   * Define the necessary options in *CMAKE_INSTALL_PREFIX* 
-   * Press <i>[c]</i> to make the final  configuration 
-   * Press <i>[g]</i> to generate  Makefile and exit 
-
-   or just run the following command: 
-
-       cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
-
-3. Start the building of gl2ps: 
-
-       make   
-
-4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option. 
-
-       make install   
-
 @subsection dev_guides__building_3rdparty_linux_3_3 FreeImage
 
 Download the necessary archive from http://sourceforge.net/projects/freeimage/files/Source%20Distribution/
@@ -221,7 +194,7 @@ Download the necessary archive from http://www.vtk.org/VTK/resources/software.ht
 
        make
 
-4. Start the installation of gl2ps. Binaries will be  installed according to the *VTK_INSTALL_PREFIX* option.
+4. Start the installation of VTK. Binaries will be installed according to the *VTK_INSTALL_PREFIX* option.
 
        make install
 
@@ -232,7 +205,7 @@ Download the necessary archive from http://www.vtk.org/VTK/resources/software.ht
 All 3rd-party products required for building of  OCCT could be installed
 from official repositories. You may install them from  console using apt-get utility:
 
-    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libxt-dev libxmu-dev libxi-dev libgl1-mesa-dev libglu1-mesa-dev libfreeimage-dev libtbb-dev libgl2ps-dev
+    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libxt-dev libxmu-dev libxi-dev libgl1-mesa-dev libglu1-mesa-dev libfreeimage-dev libtbb-dev
 
 To launch binaries built with WOK you need to install C shell and 32-bit libraries on x86_64 distributives:
 

dox/dev_guides/building/3rdparty/3rdparty_osx.md

@@ -17,7 +17,6 @@ There are two types of third-party products, which are  necessary to build OCCT:
 	* FreeType 2.4.10 - 2.5.3.
 * Optional  products: 
 	* TBB 3.x - 4.x;
-	* gl2ps  1.3.5 - 1.3.8;
 	* FreeImage 3.14.1 - 3.16.0
   
 @section dev_guides__building_3rdparty_osx_2 Building Mandatory Third-party Products
@@ -106,33 +105,6 @@ Go to the **Download** page, find the release version you need (e.g. *tbb30_018o
 and  pick the archive for Mac OS X platform. 
 To install, unpack the downloaded archive of TBB 3.0 product (*tbb30_018oss_osx.tgz*).
 
-@subsection dev_guides__building_3rdparty_osx_3_2 gl2ps 1.3.5
-
-Download the necessary archive from http://geuz.org/gl2ps/ and unpack it. 
-
-1. Install or build cmake product from the source file. 
-
-2. Start cmake in GUI mode with the directory, where the source  files of *fl2ps* are located: 
-
-       ccmake GL2PS_SRC_DIR   
-
-   * Press <i>[c]</i> to make the  initial configuration; 
-   * Define the necessary options in *CMAKE_INSTALL_PREFIX*; 
-   * Press <i>[c]</i> to make the final  configuration; 
-   * Press <i>[g]</i> to generate  Makefile and exit. 
-
-   or just run the following command: 
-
-       cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
-
-3. Start the building of gl2ps 
-
-       make   
-
-4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option 
-
-       make install   
-
 @subsection dev_guides__building_3rdparty_osx_3_3 FreeImage 3.14.1 or 3.15.x
 
 Download the necessary archive from 

dox/dev_guides/building/3rdparty/3rdparty_windows.md

@@ -17,7 +17,6 @@ There are two types of third-party products used  by OCCT:
 	* FreeType 2.4.10 -- 2.5.3.
 * Optional  products:
 	* TBB 3.x -- 4.x;
-	* gl2ps 1.3.5 -- 1.3.8;
 	* FreeImage 3.14.1 -- 3.16.0;
 	* VTK 6.1.0.
 
@@ -156,85 +155,6 @@ Unpack the downloaded  archive of TBB product into the *3rdparty* folder.
 
 Further in this document,  this folder is referred to as *tbb*. 
 
-@subsection dev_guides__building_3rdparty_win_3_2  gl2ps
-
-This third-party product should be built as a dynamically loadable library (dll file). 
-You can download its sources from  http://geuz.org/gl2ps/src/. 
-
-### The building procedure
-
-1. Unpack the downloaded  archive of gl2ps product (e.g. *gl2ps-1.3.5.tgz*) into the *3rdparty*  folder. 
-
-   As a result, you will get a folder named, for example, *3rdparty\\gl2ps-1.3.5-source*. 
-
-   Rename it into <i>gl2ps-platform-compiler-building mode</i>, where 
-   * **platform** -- *win32*  or *win64*; 
-   * **compiler** -- *vc8*, *vc9* or *vc10*; 
-   * **building mode** -- *opt*  (for release) or *deb* (for debug). 
-   
-   For example, <i>gl2ps-win64-vc10-deb</i>
-
-   Further in this document,  this folder is referred to as *gl2ps*. 
-
-2. Download (from http://www.cmake.org/cmake/resources/software.html) 
-   and install the *CMake* build system.  
-
-3. Edit the file *gl2ps\\CMakeLists.txt*. 
-
-   After line 113 in *CMakeLists.txt*: 
-
-       set_target_properties(shared PROPERTIES  COMPILE_FLAGS \"-DGL2PSDLL -DGL2PSDLL_EXPORTS\")
-    
-   add the following line:   
-    
-       add_definitions(-D_USE_MATH_DEFINES)  
-
-   Attention: If Cygwin was installed on  your computer, make sure that there is no path to it in the *PATH* variable to avoid possible conflicts during the configuration. 
-
-4. Launch CMake <i>(cmake-gui.exe)</i> using  the Program menu. 
-
-   In CMake: 
-  
-   * Define where the source code is. 
-     This path must point to *gl2ps*  folder. 
-
-   * Define where to build the  binaries. 
-     This path must point to the folder where generated gl2ps project binaries will be placed 
-     (for example, *gl2ps\\bin*). 
-     Further in this document, this folder is referred to as *gl2ps_bin*.
-
-   * Press  **Configure** button. 
-   
-     @figure{/dev_guides/building/3rdparty/images/3rdparty_image004.png}
-
-   * Select the generator (the compiler  and the target platform -- 32 or 64 bit) in the pop-up window. 
-   
-     @figure{/dev_guides/building/3rdparty/images/3rdparty_image005.png}
-
-   * Press **Finish** button to  return to the main CMake window. 
-     Expand the ENABLE group and uncheck  ENABLE_PNG and ENABLE_ZLIB check boxes. 
-	 
-     @figure{/dev_guides/building/3rdparty/images/3rdparty_image006.png}
-
-   * Expand the CMAKE group and define *CMAKE_INSTALL_PREFIX* which is the path where you want to install the build results, for example, *c:\\occ3rdparty\\gl2ps-1.3.5*. 
-   
-     @figure{/dev_guides/building/3rdparty/images/3rdparty_image007.png}
-
-   * Press **Configure** button again, then press **Generate** button to generate Visual Studio projects. After completion, close CMake application. 
-
-5. Open the solution file *gl2ps_bin\\gl2ps.sln* in Visual Studio. 
-
-   * Select a configuration to build 
-     * Choose **Release** to build Release binaries. 
-     * Choose **Debug** to build Debug binaries. 
-   * Select a platform to build. 
-     * Choose **Win32** to build for a 32 bit platform. 
-     * Choose **x64** to build for a 64 bit platform. 
-   * Build the solution. 
-   * Build the *INSTALL* project. 
-    
-As a  result, you should have the installed gl2ps product in the *CMAKE_INSTALL_PREFIX* path. 
-
 @subsection dev_guides__building_3rdparty_win_3_3 FreeImage
 
 This third-party product should be built as a dynamically loadable library (.dll file). 

dox/dev_guides/building/cmake/cmake.md

@@ -82,21 +82,21 @@ The following table gives the full list of environment variables used at the con
 |----------|------|---------|
 | CMAKE_BUILD_TYPE | String | Specifies the build type on single-configuration generators (such as make).  Possible values are Debug, Release and RelWithDebInfo |
 | USE_FREEIMAGE | Boolean flag | Indicates whether FreeImage product should be used in OCCT visualization module for support of popular graphics image formats (PNG, BMP, etc.) |
-| USE_GL2PS | Boolean flag | Indicates whether GL2PS product should be used in OCCT visualization module for support of vector image formats (PS, EPS, etc.) |
 | USE_TBB | Boolean flag | Indicates whether TBB 3rd party is used or not. TBB stands for Threading Building Blocks, the technology of Intel Corp, which comes with different mechanisms and patterns for injecting parallelism into your application. OCCT remains parallel even without TBB product |
 | USE_VTK | Boolean flag | Indicates whether VTK 3rd party is used or not. VTK stands for Visualization ToolKit, the technology of Kitware Inc intended for general-purpose scientific visualization. OCCT comes with a bridge between CAD data representation and VTK by means of its dedicated VIS component (VTK Integration Services). You may skip this 3rd party unless you are planning to use VTK visualization for OCCT geometry. See the official documentation @ref occt_user_guides__vis for the details on VIS |
 | 3RDPARTY_DIR | Path | Defines the root directory where all required 3rd party products will be searched. Once you define this path it is very convenient to click "Configure" button in order to let CMake automatically detect all necessary products|
 | 3RDPARTY_FREETYPE_* | Path | Path to Freetype binaries |
 | 3RDPARTY_TCL_* 3RDPARTY_TK_* | Path | Path to Tcl/Tk binaries |
 | 3RDPARTY_FREEIMAGE* | Path | Path to Freeimage binaries |
-| 3RDPARTY_GL2PS_* | Path | Path to GL2PS binaries |
 | 3RDPARTY_TBB* | Path | Path to TBB binaries |
 | 3RDPARTY_VTK_* | Path | Path to VTK binaries |
 | BUILD_MODULE_<MODULE>| Boolean flag | Indicates whether the corresponding OCCT module should be built or not. It should be noted that some toolkits of a module can be built even if this module is not checked (this happens if some other modules depend on these toolkits). The main modules and their descriptions can be found in @ref user_guides |
-| BUILD_LIBRARY_TYPE | String |  Specifies the type of library to be created. "Shared" libraries are linked dynamically and loaded at runtime. "Static" libraries are archives of object files used when linking other targets |
+| BUILD_LIBRARY_TYPE | String |  Specifies the type of library to be created. "Shared" libraries are linked dynamically and loaded at runtime. "Static" libraries are archives of object files used when linking other targets. Note that Draw Harness plugin system is incompatible with "Static" builds, and therefore it is disabled for these builds.|
 | BUILD_ADDITIONAL_TOOLKITS | String | Semicolon-separated individual toolkits to include into build process. If you want to build some particular libraries (toolkits) only, then you may uncheck all modules in the corresponding *BUILD_MODUE_\<MODULE\>* options and provide the list of necessary libraries here. Of course, all dependencies will be resolved automatically |
 | BUILD_YACCLEX | Boolean flag | Enables Flex/Bison lexical analyzers. OCCT source files relating to STEP reader and ExprIntrp functionality are generated automatically with Flex/Bison. Checking this option leads to automatic search of Flex/Bison binaries and regeneration of the mentioned files |
-| BUILD_MODULE_MfcSamples | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
+| BUILD_SAMPLES_MFC | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
+| BUILD_SAMPLES_QT | Boolean flag | Indicates whether QT samples should be built together with OCCT. |
+| BUILD_Inspector | Boolean flag | Indicates whether Inspector should be built together with OCCT. |
 | BUILD_DOC_Overview | Boolean flag | Indicates whether OCCT overview documentation project should be created together with OCCT. It is not built together with OCCT. Checking this option leads to automatic search of Doxygen binaries. Its building calls Doxygen command to generate the documentation in HTML format |
 | BUILD_PATCH | Path | Points to the directory recognized as a "patch" for OCCT. If specified, the files from this directory take precedence over the corresponding native OCCT sources. This way you are able to introduce patches to Open CASCADE Technology not affecting the original source distribution |
 | BUILD_WITH_DEBUG | Boolean flag | Enables extended messages of many OCCT algorithms, usually printed to cout. These include messages on internal errors and special cases encountered, timing, etc. |
@@ -115,7 +115,6 @@ The following table gives the full list of environment variables used at the con
 | INSTALL_DIR_DOC | Path | Relative path to the documentation installation directory (absolute path is ${INSTALL_DIR}/${INSTALL_DIR_DOC}) |
 | INSTALL_FREETYPE | Boolean flag | Indicates whether Freetype binaries should be installed into the installation directory |
 | INSTALL_FREEIMAGE* | Boolean flag | Indicates whether Freeimage binaries should be installed into the installation directory |
-| INSTALL_GL2PS | Boolean flag | Indicates whether GL2PS binaries should be installed into the installation directory |
 | INSTALL_TBB | Boolean flag | Indicates whether TBB binaries should be installed into the installation directory |
 | INSTALL_VTK | Boolean flag | Indicates whether VTK binaries should be installed into the installation directory |
 | INSTALL_TCL | Boolean flag | Indicates whether TCL binaries should be installed into the installation directory |

dox/dev_guides/building/code_blocks.md

@@ -26,7 +26,7 @@ The environment is defined in the file *custom.sh* (on Linux and OS X) or *custo
   * "HardLink* - hard links to headers located in *src* will be created.
 * For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
 ~~~~~
-       export HAVE_GL2PS=false
+       export HAVE_FREEIMAGE=false
 ~~~~~
 
 Alternatively, or when *custom.sh* or *custom.bat* does not exist, you can launch **genconf** tool to configure environment interactively:
@@ -56,6 +56,6 @@ To build all toolkits, click **Build->Build workspace** in the menu bar.
 
 To start *DRAWEXE*, which has been built with **Code::Blocks** on Mac OS X, run the script
 ~~~~~
-   ./draw_cbp.sh cbp [d]
+   ./draw.sh cbp [d]
 ~~~~~
 Option *d* is used if OCCT has been built in **Debug** mode.

dox/dev_guides/building/xcode.md

@@ -27,7 +27,7 @@ The environment is defined in the file *custom.sh* which can be edited directly:
   * "HardLink* - hard links to headers located in *src* will be created.
 * For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
 ~~~~~
-       export HAVE_GL2PS=false
+       export HAVE_FREEIMAGE=false
 ~~~~~
 
 Alternatively, or when *custom.sh* does not exist, you can launch *genconf.sh* to configure environment interactively:
@@ -49,6 +49,13 @@ For instance, in Terminal application:
   $ ./genproj
 ~~~~~
 
+Option **-static** can be used with XCode to build static libraries.
+
+~~~~~
+  $ cd /dev/OCCT/opencascade-7.0.0
+  $ ./genproj xcd -static
+~~~~~
+
 @section build_xcode_build Building
 
 To start **Xcode**, launch script *xcode.sh*.

dox/dev_guides/contribution/coding_rules.md

@@ -76,19 +76,28 @@ Note that .lxx files should be avoided in most cases - inline method should be p
 
 Toolkit names are prefixed by *TK*, followed by a meaningful part of the name explaining the domain of functionality covered by the toolkit (e.g. *TKOpenGl*).
 
-### Names of classes
+### Names of public types
 
-Usually the names of source files located in a unit start from the unit name separated from the other part of the file name by underscore "_".
-
-Thus, the names of files containing sources of C++ classes that belong to a package are constructed according to the following template:
+Names of public classes and other types (structures, enums, typedefs) should match the common pattern: name of the package followed by underscore and suffix (the own name of the type):
 
 ~~~~~
-    <package-name>_<class-name>.cxx (or .hxx)
+    <package-name>_<class-name>
 ~~~~~
 
-For example, file *Adaptor2d_Curve2d.cxx* belongs to the package *Adaptor2d*
+Static methods related to the whole package are defined in the class with the same name as package (without suffix).
 
-Files that contain sources related to the whole unit are called by the unit name with appropriate extension.
+Each type should be defined in its own header file with the name of the type and extension ".hxx".
+Implementation should be placed in the file with the same name and extension ".cxx"; for large classes it is possible to split implementation into multiple source files with additional suffixes in the names (usually numerical, e.g. *BSplCLib_1.cxx*).
+
+For example, class *Adaptor2d_Curve2d* belongs to the package *Adaptor2d*; it is defined in header file *Adaptor2d_Curve2d.hxx* and implemented in source file *Adaptor2d_Curve2d.cxx*.
+
+This rule also applies to complex types constructed by instantiation of templates.
+Such types should be given own names using *typedef* statement, located in same-named header file.
+
+For example, see definition in the file *TColStd_IndexedDataMapOfStringString.hxx*:
+~~~~~
+typedef NCollection_IndexedDataMap<TCollection_AsciiString,TCollection_AsciiString,TCollection_AsciiString> TColStd_IndexedDataMapOfStringString;
+~~~~~
 
 ### Names of functions
 
@@ -479,6 +488,8 @@ Inclusion of class header on top verifies consistency of the header (e.g. that h
 
 An exception to the rule is ordering system headers generating a macros declaration conflicts (like "windows.h" or "X11/Xlib.h") - these headers should be placed in the way solving the conflict.
 
+The source or header file should include only minimal set of headers necessary for compilation, without duplicates (considering nested includes).
+
 ~~~~~{.cpp}
 // the header file of implemented class
 #include <PackageName_ClassName.hxx>

dox/dev_guides/contribution_workflow/contribution_workflow.md

@@ -204,7 +204,7 @@ In a general case, the following elements should be present:
 Example:
 
 > *0026330: BRepOffsetAPI_ThruSections creates invalid shape.*
-> 
+>
 > *Methods BRep_Tool::CurveOnSurface() and BRepCheck_Edge::InContext() now properly handle parametric range on a 3D curve when it is used to generate a p-curve dynamically (on a planar surface) and both the surface and the 3D curve have non-null locations.*
 
 Provide sufficient context so that potential user of the affected functionality can understand what has been changed and how the algorithm works now.

dox/dev_guides/documentation/documentation.md

@@ -134,7 +134,7 @@ Add a relative path to *svn.md* in file <i>dox/FILES.txt</i>. For instance
 dev_guides/svn/svn.md
 @endverbatim
 
-**Note** that the order of paths to documents in *FILES.txt* is reproduced in the Table of Contents in the HTML output. Please, place them logically.
+**Note** that the order of paths to documents in *FILES.txt* is reproduced in the Table of Contents in the HTML output, thus they need to be placed logically.
 
 **Note** that you should specify a file tag, not the document name. See @ref OCCT_DM_SECTION_A_1 "Header and hierarchic document structure" section for details.
 
@@ -180,7 +180,7 @@ For example:
   @subsubsection occt_ocaf_1_1_1 The document and the data framework
 @endverbatim
 
-Please, note that section names can be used for references within the document and in other documents, so it is necessary to use the common prefix indicative of the document name for all section names in the given document. 
+**Note** that section names can be used for references within the document and in other documents, so it is necessary to use the common prefix indicative of the document name for all section names in the given document. 
 For example,  *occt_ocaf* for sections in Open CASCADE Application Framework manual.
 
 The remaining part of section names in most documents consists only of numbers, for example *1_1*. Actually, the hierarchical structure of the output table of contents is not based on these numbers and is generated automatically. 
@@ -352,6 +352,21 @@ Smaller code blocks can be inserted by wrapping with tags <i>\@code</i> and <i>\
 
 Verbatim content (same as code but without syntax highlighting) can be inserted by wrapping with tags <i>\@verbatim</i> and <i>\@endverbatim</i>.
 
+@subsection  OCCT_DM_SECTION_A_5a Quotes
+
+Text quoted from other sources can be indented using ">" tag. For example:
+
+@verbatim
+> [Regression in 6.9.0] *IGES - Export of a reversed face leads to wrong data*
+@endverbatim
+
+will produce 
+
+> [Regression in 6.9.0] *IGES - Export of a reversed face leads to wrong data*
+
+Note that this tag should prefix each line of the quoted text.
+Empty lines in the quoted text, if any, should not have trailing spaces after the ">" (lines with trailing spaces will break the quote block).
+
 @subsection  OCCT_DM_SECTION_A_6 References
 
 To insert a reference to a website, it is sufficient to write an URL.

dox/dev_guides/git_guide/git_guide.md

@@ -11,14 +11,13 @@ Guide to installing and using Git for OCCT development {#occt_dev_guides__git_gu
   to OCCT developers who are not familiar with this tool 
   and to facilitate the use of the official OCCT Git repository for code contribution to OCCT.
 
-  Reading this document does not exempt from the need to learn Git concepts and tools. 
-  Please consult a book or manual describing Git to get acquainted with this tool. 
+  It can be useful to learn more about Git concepts and tools from a book a or manual. 
   Many good books on Git can be found at http://git-scm.com/documentation 
   
   For the experienced Git users it can be enough to read sections 1 and 3
    of this document to start working with the repository.
    
-  Please make sure to get familiar with the Contribution Workflow document 
+  Familiarize yourselves with the @ref occt_dev_guides__contribution_workflow "Contribution Workflow document"  
   that describes how Git is used for processing contributions to OCCT.
   
   This and related documents are available at the Resources page 
@@ -82,8 +81,8 @@ The official repository contains:
 
 @subsection occt_gitguide_1_5 Version of Git
 
-  The repository is tested to work with Git 1.7.6 to 1.7.9. 
-  Please do not use versions below 1.7.1 as they are known to cause troubles.
+  The repository is tested to work with Git 1.7.6 and above. 
+  Avoid using versions below 1.7.1 as they are known to cause troubles.
 
 @section occt_gitguide_2 Installing Tools for Work with Git
 
@@ -139,6 +138,13 @@ The official repository contains:
   
   @figure{OCCT_GitGuide_V2_image006.png,"",320}
 
+  Optionally, you can set up TortoiseGit to use visual diff utility for SVG images used in OCCT documentation.
+  For that, click on item "Diff Viewer" in the Settings dialog, then click button "Advanced..." in the right tab to add a new record with the following parameters:
+  - Extension: <code>.svg</code>
+  - External program: <code>&lt;path_to_OCCT&gt;\\adm\\svgdiff.bat %%base %%mine %%bname %%yname</code>
+
+@figure{OCCT_GitGuide_V2_svgdiff.png,"",709}
+
 @subsection occt_gitguide_2_2 Linux platform
 
   We assume that Linux users have Git already installed and available in the *PATH*.
@@ -243,7 +249,7 @@ Click **Save** to input the key to the system.
   It is typical to use your e-mail address or workstation name for this field; no restrictions are set by the portal.
 
 
-  Please note that some time (5-10 min) is needed for the system 
+  **Note** that some time (5-10 min) is needed for the system 
   to update the configuration after the new key is added. 
   After that time, you can try accessing Git.
 

dox/dev_guides/tests/tests.md

@@ -192,7 +192,11 @@ Use prefix <i>bug</i> followed by Mantis issue ID and, if necessary, additional
 	*	If the test case reports error due to an existing problem and the fix is not available, add @ref testmanual_3_6 "TODO" statement for each error to mark it as a known problem. The TODO statements must be specific so as to match the actually generated messages but not all similar errors.
 	*	To check expected output which should be obtained as the test result, add @ref testmanual_3_7 "REQUIRED" statement for each line of output to mark it as required.
 	*	If the test case produces error messages (contained in parse.rules), which are expected in that test and should not be considered as its failure (e.g. test for *checkshape* command), add REQUIRED statement for each error to mark it as required output.
-4.	If the test uses data file(s) that are not yet present in the test database, it is possible to put them to (sub)directory pointed out by *CSF_TestDataPath* variable for running test. The files should be attached to the Mantis issue corresponding to the tested modification.
+4.	To check whether the data files needed for the test are already present in the database, use DRAW command *testfile* (see below).
+    If the data file is already present, use it for a new test instead of adding a duplicate.
+    If the data file(s) are not yet present in the test database, put them to a folder and add it to the environment variable *CSF_TestDataPath* to be found by the test system.
+    The location of the data files, which need to be accessed by OCC team and put to the official database, should be provided in the comment to Mantis issue, clearly indicating how the names of the files used by the test script match the actual names of the files.
+    The simplest way is to attach the data files to the Mantis issue, with the same names as used by the test script.
 5.	Check that the test case runs as expected (test for fix: OK with the fix, FAILED without the fix; test for existing problem: BAD), and integrate it to the Git branch created for the issue.
 
 Example:
@@ -218,6 +222,33 @@ fixshape result a 0.01 0.01
 checkshape result
 ~~~~~
 
+DRAW command *testfile* should be used to check the data files used by the test for possible duplication of content or names.
+The command accepts the list of paths to files to be checked (as a single argument) and gives a conclusion on each of the files, for instance:
+
+~~~~~
+Draw[1]> testfile [glob /my/data/path/bug12345*]
+Collecting info on test data files repository...
+Checking new file(s)...
+
+* /my/data/path/bug12345.brep: duplicate
+  already present under name bug28773_1.brep
+  --> //server/occt_tests_data/public/brep/bug28773_1.brep
+
+* /my/data/path/cadso.brep: new file
+  Warning: DOS encoding detected, consider converting to
+           UNIX unless DOS line ends are needed for the test
+  Warning: shape contains triangulation (946 triangles),
+           consider removing them unless they are needed for the test!
+  BREP size=201 KiB, nbfaces=33, nbedges=94 -> private
+
+* /my/data/path/case_8_wire3.brep: already present
+  --> //server/occt_tests_data/public/brep/case_8_wire3.brep
+
+* /my/data/path/case_8_wire4.brep: error
+  name is already used by existing file
+  --> //server/occt_tests_data/public/brep/case_8_wire4.brep
+~~~~~
+
 @section testmanual_2 Organization of Test Scripts
 
 @subsection testmanual_2_1 General Layout

dox/dev_guides/upgrade/upgrade.md

@@ -51,7 +51,7 @@ for (Standard_Integer aGr = 1; aGr <= aLen; ++aGr)
 
 * All occurrences of *Select3D_Projector* in the application code (if any) should be replaced with *Handle(Select3D_Projector)*.
 * The code of inheritors of *Select3D_SensitiveEntity* should be updated if they override <i>Matches()</i> (this is probable, if clipping planes are used).
-* Constructor for *V3d_Plane* has been changed, so the extra argument should be removed if used in the application. It is necessary to add a new plane using method *V3d_Viewer::AddPlane()* if *V3d_Viewer* has been used to manage clipping planes list (this does not affect clipping planes representation). Please, have a look at the source code for new DRAWEXE *vclipplane* command in *ViewerTest_ObjectsCommands.cxx, VClipPlane* to see how clipping planes can be managed in the application.
+* Constructor for *V3d_Plane* has been changed, so the extra argument should be removed if used in the application. It is necessary to add a new plane using method *V3d_Viewer::AddPlane()* if *V3d_Viewer* has been used to manage clipping planes list (this does not affect clipping planes representation). Have a look at the source code for new DRAWEXE *vclipplane* command in *ViewerTest_ObjectsCommands.cxx, VClipPlane* to see how clipping planes can be managed in the application.
 
 @section upgrade_652 Upgrade to OCCT 6.5.2
 
@@ -112,14 +112,14 @@ Porting of user applications from an earlier OCCT version to version 6.6.0 requi
 It is necessary to introduce the corresponding changes in the applications for which the order of sub-shapes resulting from a Boolean operation is important. It is strongly recommended to use identification methods not relying on the order of sub-shapes (e.g. OCAF naming).
 * If you need to use OCCT on Mac OS X with X11 (without Cocoa), build OCCT with defined pre-processor macro *CSF_MAC_USE_GLX11*. XLib front-end (previously the only way for unofficial OCCT builds on Mac OS X) is now disabled by default on this platform. If your application has no support for Cocoa framework you may build OCCT with XLib front-end adding *MACOSX_USE_GLX* macro to compiler options (you may check the appropriate option in WOK configuration GUI and in CMake configuration). Notice that XQuartz (XLib implementation for Mac OS X) now is an optional component and does not provide a sufficient level of integrity with native (Cocoa-based) applications in the system. It is not possible to build OCCT with both XLib and Cocoa at the same time due to symbols conflict in OpenGL functions. 
 * Animation mode and degeneration presentation mode (simplified presentation for animation) and associated methods have been removed from 3D viewer functionality.
-Correspondingly, the code using methods *SetAnimationModeOn(), SetAnimationModeOff(), AnimationModeIsOn(), AnimationMode(), Tumble(), SetDegenerateModeOn(), SetDegenerateModeOff()* and *DegenerateModeIsOn()* of classes *V3d_View* and *Visual3d_View* will need to be removed or redesigned. Please, notice that Hidden Line Removal presentation was not affected; however, the old code that used methods *V3d_View::SetDegenerateModeOn* or *V3d_View::SetDegenerateModeOff* to control HLR presentation should be updated to use *V3d_View::SetComputedMode* method instead.
+Correspondingly, the code using methods *SetAnimationModeOn(), SetAnimationModeOff(), AnimationModeIsOn(), AnimationMode(), Tumble(), SetDegenerateModeOn(), SetDegenerateModeOff()* and *DegenerateModeIsOn()* of classes *V3d_View* and *Visual3d_View* will need to be removed or redesigned. Hidden Line Removal presentation was not affected; however, the old code that used methods *V3d_View::SetDegenerateModeOn* or *V3d_View::SetDegenerateModeOff* to control HLR presentation should be updated to use *V3d_View::SetComputedMode* method instead.
 * Calls of *Graphic3d_Group::BeginPrimitives()* and *Graphic3d_Group::EndPrimitives()* should be removed from the application code.
 * Application functionality for drawing 2D graphics that was formerly based on *TKV2d* API should be migrated to *TKV3d* API. The following changes are recommended for this migration:
    * A 2D view can be implemented as a *V3d_View* instance belonging to *V3d_Viewer* managed by *AIS_InteractiveContext* instance. To turn *V3d_View* into a 2D view, the necessary view orientation should be set up at the view initialization stage using *V3d_View::SetProj()* method, and view rotation methods simply should not be called.
    * Any 2D graphic entity (formerly represented with *AIS2D_InteractiveObject*) should become a class derived from *AIS_InteractiveObject* base. These entities should be manipulated in a view using *AIS_InteractiveContext* class API.
    * All drawing code should be put into *Compute()* virtual method of a custom interactive object class and use API of *Graphic3d* package. In particular, all geometry should be drawn using class hierarchy derived from *Graphic3d_ArrayOfPrimitives*. Normally, the Z coordinate for 2D geometry should be constant, unless the application implements some advanced 2D drawing techniques like e.g. multiple "Z layers" of drawings.
    * Interactive selection of 2D presentations should be set up inside *ComputeSelection()* virtual method of a custom interactive object class, using standard sensitive entities from *Select3D* package and standard or custom entity owners derived from *SelectMgr_EntityOwner* base.
-Please refer to the Visualization User's Guide for further details concerning OCCT 3D visualization and selection classes. See also *Viewer2D* OCCT sample application, which shows how 2D drawing can be implemented using TKV3d API.
+Refer to the Visualization User's Guide for further details concerning OCCT 3D visualization and selection classes. See also *Viewer2D* OCCT sample application, which shows how 2D drawing can be implemented using TKV3d API.
 * Run-time graphic driver library loading mechanism based on *CSF_GraphicShr* environment variable usage has been replaced by explicit linking against *TKOpenGl* library. The code sample below shows how the graphic driver should be created and initialized in the application code: 
 ~~~~
 // initialize a new viewer with OpenGl graphic driver
@@ -161,10 +161,10 @@ Porting of user applications from an earlier OCCT version to version 6.7.0 requi
 
 @subsection upgrade_670_clipping Object-level clipping and capping algorithm. 
 
-* It might be necessary to revise and port code related to management of view-level clipping to use *Graphic3d_ClipPlane* instead of *V3d_Plane* instances. Please note that *V3d_Plane* class has been preserved -- as previously, it can be used as plane representation. Another approach to represent *Graphic3d_ClipPlane* in a view is to use custom presentable object.
-* The list of arguments of *Select3D_SensitiveEntity::Matches()* method for picking detection has changed. Since now, for correct selection clipping, the implementations should perform a depth clipping check and return (as output argument) minimum depth value found at the detected part of sensitive. Please refer to CDL / Doxygen documentation to find descriptive hints and snippets.
+* It might be necessary to revise and port code related to management of view-level clipping to use *Graphic3d_ClipPlane* instead of *V3d_Plane* instances. Note that *V3d_Plane* class has been preserved -- as previously, it can be used as plane representation. Another approach to represent *Graphic3d_ClipPlane* in a view is to use custom presentable object.
+* The list of arguments of *Select3D_SensitiveEntity::Matches()* method for picking detection has changed. Since now, for correct selection clipping, the implementations should perform a depth clipping check and return (as output argument) minimum depth value found at the detected part of sensitive. Refer to CDL / Doxygen documentation to find descriptive hints and snippets.
 * *Select3D_SensitiveEntity::ComputeDepth()* abstract method has been removed. Custom implementations should provide depth checks by method *Matches()* instead -- all data required for it is available within a scope of single method.
-* It might be necessary to revise the code of custom sensitive entities and port *Matches()* and *ComputeDepth()* methods to ensure proper selection clipping. Please note that obsolete signature of *Matches* is not used anymore by the selector. If your class inheriting *Select3D_SensitiveEntity* redefines the method with old signature the code should not compile as the return type has been changed. This is done to prevent override of removed methods.
+* It might be necessary to revise the code of custom sensitive entities and port *Matches()* and *ComputeDepth()* methods to ensure proper selection clipping. Note that obsolete signature of *Matches* is not used anymore by the selector. If your class inheriting *Select3D_SensitiveEntity* redefines the method with old signature the code should not compile as the return type has been changed. This is done to prevent override of removed methods.
 
 @subsection upgrade_670_markers Redesign of markers presentation
 
@@ -210,7 +210,7 @@ If *ViewMapping* and *ViewOrientation* were used directly, this functionality ha
 
 The current perspective model is not fully backward compatible, so the old perspective-related functionality needs to be reviewed.
 
-Please revise application-specific custom presentations to provide proper bounding box. Otherwise object might become erroneously clipped by automatic *ZFit* or frustum culling algorithms enabled by default.
+Revise application-specific custom presentations to provide a proper bounding box, otherwise the object might become erroneously clipped by automatic *ZFit* or frustum culling algorithms enabled by default.
 
 @subsection upgrade_680_connected_objects Redesign of Connected Interactive Objects
 
@@ -324,6 +324,15 @@ The methods *V3d_View::Convert* and *V3d_View::ConvertWithProj()* have ceased to
 
 Porting of user applications from an earlier OCCT version to version 7.0.0 requires taking into account the following major changes.
 
+Building OCCT now requires compiler supporting some C++11 features.
+The supported compilers are:
+- MSVC: version 10 (Visual Studio 2010) or later
+- GCC: version 4.3 or later
+- CLang: version 3.6 or later
+- ICC: version XE 2013 SP 1 or later
+
+When compiling code that uses OCCT with GCC and CLang compilers, it is necessary to use compiler option -std=c++0x (or its siblings) to enable C++11 features.
+
 @subsection upgrade_700_persist Removal of legacy persistence
 
 Legacy persistence for shapes and OCAF data based on *Storage_Schema* (toolkits *TKPShape*, *TKPLCAF*, *TKPCAF*, *TKShapeShcema, TLStdLSchema, TKStdSchema*, and *TKXCAFSchema*) has been removed in OCCT 7.0.0.
@@ -782,6 +791,7 @@ std::stable_sort (aValues.begin(), aValues.end());
 
 The old mechanism for rendering Underlay and Overlay on-screen 2D objects based on *Visual3d_Layer* and immediate drawing model (uncached and thus slow) has been removed.
 Classes *Aspect_Clayer2d, OpenGl_GraphicDriver_Layer, Visual3d_Layer, Visual3d_LayerItem, V3d_LayerMgr* and *V3d_LayerMgrPointer* have been deleted.
+The following auxiliary definition have been removed as well: Aspect_TypeOfPrimitive, Aspect_TypeOfLayer, Aspect_TypeOfEdge, Aspect_TypeOfDrawMode, Aspect_TypeOfConstraint, Aspect_DriverDefinitionError, Aspect_BadAccess.
 
 General AIS interactive objects with transformation persistence flag *Graphic3d_TMF_2d* can be used as a replacement of *Visual3d_LayerItem*.
 The anchor point specified for transformation persistence defines the window corner of  (or center in case of (0, 0) point).
@@ -977,11 +987,11 @@ The applications that use *gp_Quaternion* to convert Yaw-Pitch-Roll angles (or o
 
 @subsection upgrade_zoom_persistent_selection Zoom Persistent Selection
 
-Zoom persistent selection introduces a new structure *Graphic3d_TransformPers* to transform persistence methods and parameters and a new class *Graphic3d_WorldViewProjState* to refer to the camera transformation state. You might need to update your code to deal with the new classes if you were using the related features. Please, keep in mind the following: 
+Zoom persistent selection introduces a new structure *Graphic3d_TransformPers* to transform persistence methods and parameters and a new class *Graphic3d_WorldViewProjState* to refer to the camera transformation state. You might need to update your code to deal with the new classes if you were using the related features. Keep in mind the following: 
 * *Graphic3d_Camera::ModelViewState* has been renamed to *Graphic3d_Camera::WorldViewState*.
 * Transformation matrix utilities from *OpenGl_Utils* namespace have been moved to *Graphic3d_TransformUtils* and *Graphic3d_TransformUtils.hxx* header respectively.
 * Matrix stack utilities from *OpenGl_Utils* namespace have been moved to *OpenGl_MatrixStack* class and *OpenGl_MatrixStack.hxx* header respectively.
-* *OpenGl_View* methods *Begin/EndTransformPersistence* have been removed. Please, use *Graphic3d_TransformPers::Apply()* instead to apply persistence to perspective and world-view projection matrices.
+* *OpenGl_View* methods *Begin/EndTransformPersistence* have been removed. Use *Graphic3d_TransformPers::Apply()* instead to apply persistence to perspective and world-view projection matrices.
 
 @subsection upgrade_occt700_correction_of_texture Texture mapping of objects
 
@@ -1114,7 +1124,7 @@ The following classes have been changed:
 * *BRepTools_Modifier* class now has two modes of work. They are defined by the boolean parameter *MutableInput*, which is turned off by default. This means that the algorithm always makes a copy of a sub-shape (e.g. vertex) if its tolerance is to be increased in the output shape. The old mode corresponds to *MutableInput* turned on. This change may impact an application if it implements a class derived from *BRepTools_Modifier*.
 * The second parameter *theIsOuterWire* of method *ShapeAnalysis_Wire::CheckSmallArea* has been removed.
 * In class *GeomPlate_CurveConstraint*, two constructors taking boundary curves of different types have been replaced with one constructor taking the curve of an abstract type.
-*  The last optional argument *RemoveInvalidFaces* has been removed from the constructor of class  *BRepOffset_MakeOffset* and method *Initialize*.
+* The last optional argument *RemoveInvalidFaces* has been removed from the constructor of class  *BRepOffset_MakeOffset* and method *Initialize*.
 * The public method *BOPDS_DS::VerticesOnIn* has been renamed into *SubShapesOnIn* and the new output parameter *theCommonPB* has been added.
 
 @section upgrade_occt720 Upgrade to OCCT 7.2.0
@@ -1147,7 +1157,13 @@ The following obsolete features have been removed:
 * The method Perform of the *ShapeConstruct_ProjectCurveOnSurface* class is modified:
   - input arguments *continuity*, *maxdeg*, *nbinterval* have been removed as unused;
   - input arguments *TolFirst*, *TolLast* have been added at the end of arguments' list.
-* The functionality to process shapes different only in orientation by different ways was removed from types *BRepTools_ReShape* and *ShapeBuild_ReShape*.
+* Typedefs Quantity_Factor, Quantity_Parameter, Quantity_Ratio, Quantity_Coefficient, Quantity_PlaneAngle, Quantity_Length, V3d_Parameter and V3d_Coordinate have been removed; Standard_Real should be used instead.
+
+@subsection upgrade_occt720_reshape_oriented_removed Corrections in BRepOffset API
+
+In classes *BRepTools_ReShape* and *ShapeBuild_ReShape*, the possibility to process shapes different only by orientation in different ways has been removed.
+Thus methods *Remove()* and *Replace()* do not have any more the last argument 'oriented'; they work always as if *Standard_False* was passed before (default behavior).
+Methods *ModeConsiderLo()* and *Apply()* with three arguments have been removed.
 
 @subsection upgrade_occt720_correction_of_Offset_API Corrections in BRepOffset API
 
@@ -1195,12 +1211,17 @@ Management of highlight attributes has been revised and might require modificati
   it is now possible to customize default highlight attributes like *Display Mode* and *ZLayer*, which previously could be defined only on Object level.
 * Properties *Prs3d_Drawer::HighlightStyle()* and *Prs3d_Drawer::SelectionStyle()* have been removed.
   Instead, *AIS_InteractiveObject* now defines *DynamicHilightAttributes()* for dynamic highlighting in addition to *HilightAttributes()* used for highlighting in selected state.
+  Note that *AIS_InteractiveObject::HilightAttributes()* and *AIS_InteractiveObject::DynamicHilightAttributes()* override highlighting properties for both - entire object and for part coming from decomposition.
+  This includes Z-layer settings, which will be the same when overriding properties through AIS_InteractiveObject, while *AIS_InteractiveContext::HighlightStyle()* allows customizing properties for local and global selection independently
+  (with Graphic3d_ZLayerId_Top used for dynamic highlighting of entire object and Graphic3d_ZLayerId_Topmost for dynamic highlighting of object part by default).
 * The following protected fields have been removed from class *AIS_InteractiveObject*:
   - *myOwnColor*, replaced by *myDrawer->Color()*
   - *myTransparency*, replaced by *myDrawer->Transparency()*
   - *myZLayer*, replaced by *myDrawer->ZLayer()*
 * The method *PrsMgr_PresentationManager::Unhighlight()* taking Display Mode as an argument has been marked deprecated.
   Implementation now performs unhighlighting of all highlighted presentation mode.
+* The methods taking/returning *Quantity_NameOfColor* (predefined list of colors) and duplicating methods operating with *Quantity_Color* (definition of arbitrary RGB color) in AIS have been removed.
+  *Quantity_Color* should be now used instead.
 
 @subsection upgrade_720_implicit_viewer_update Elimination of implicit 3D Viewer updates
 
@@ -1214,7 +1235,7 @@ To avoid such issues, the interface has been modified and default value has been
 Therefore, old application code should be updated to set the flag theToUpdateViewer explicitly
 to desired value (TRUE to preserve old previous behavior), if it was not already set.
 
-The follow AIS_InteractiveContext methods have been changed:
+The following AIS_InteractiveContext methods have been changed:
   Display, Erase, EraseAll, DisplayAll, EraseSelected, DisplaySelected, ClearPrs, Remove, RemoveAll, Hilight,
   HilightWithColor, Unhilight, Redisplay, RecomputePrsOnly, Update, SetDisplayMode, UnsetDisplayMode, SetColor,
   UnsetColor, SetWidth, UnsetWidth, SetMaterial, UnsetMaterial, SetTransparency, UnsetTransparency,
@@ -1261,7 +1282,8 @@ In most cases this change should be transparent, however applications implementi
 * Package BVH now uses opencascade::handle instead of NCollection_Handle (for classes BVH_Properties, BVH_Builder, BVH_Tree, BVH_Object).
   Application code using BVH package directly should be updated accordingly.
 * AIS_Shape now computes UV texture coordinates for AIS_Shaded presentation in case if texture mapping is enabled within Shaded Attributes.
-  Therefore, redundant class AIS_TexturedShape has been marked deprecated - applications can use AIS_Shape directly (texture mapping should be defined through AIS_Shape::Attributes()).
+  Therefore, redundant class *AIS_TexturedShape is now deprecated* - applications can use *AIS_Shape* directly (texture mapping should be defined through AIS_Shape::Attributes()).
+* Methods for managing active texture within OpenGl_Workspace class (ActiveTexture(), DisableTexture(), EnableTexture()) have been moved to *OpenGl_Context::BindTextures()*.
 
 @subsection upgrade_720_BOP_DataStructure BOP - Pairs of interfering indices
 
@@ -1286,14 +1308,14 @@ In most cases this change should be transparent, however applications implementi
 
 
 @subsection upgrade_720_persistence Restore OCCT 6.9.1 persistence
-  
-The capability of reading / writing files in old format using *Storage_ShapeSchema* functionality from OCCT 6.9.1 has been restored in OCCT 7.2.0. 
+
+The capability of reading / writing files in old format using *Storage_ShapeSchema* functionality from OCCT 6.9.1 has been restored in OCCT 7.2.0.
 
 One can use this functionality in two ways:
 - invoke DRAW Test Harness commands *fsdread / fsdwrite* for shapes;
 - call *StdStorage* class *Read / Write* functions in custom code.
 
-The code example below demonstrates how to read shapes from a storage driver using *StdStorage* class. 
+The code example below demonstrates how to read shapes from a storage driver using *StdStorage* class.
 
 ~~~~
 // aDriver should be created and opened for reading
@@ -1341,7 +1363,7 @@ NCollection_Handle<Storage_BaseDriver> aFileDriver(new FSD_File());
 try
 {
   OCC_CATCH_SIGNALS
-  PCDM_ReadWriter::Open(*aFileDriver, TCollection_ExtendedString(CStringA(filename).GetBuffer()), Storage_VSWrite);
+  PCDM_ReadWriter::Open (*aFileDriver, TCollection_ExtendedString(theFilename), Storage_VSWrite);
 }
 catch (Standard_Failure& e)
 {
@@ -1349,7 +1371,7 @@ catch (Standard_Failure& e)
 }
 
 // Create a storage data instance
-Handle(StdStorage_Data) aData = new StdStorage_Data;
+Handle(StdStorage_Data) aData = new StdStorage_Data();
 // Set an axiliary application name (optional)
 aData->HeaderData()->SetApplicationName(TCollection_ExtendedString("Application"));
 
@@ -1368,8 +1390,7 @@ for (Standard_Integer i = 1; i <= shapes.Length(); ++i)
   }
 
   // Construct a root name
-  TCollection_AsciiString aName = "Shape_";
-  aName += i;
+  TCollection_AsciiString aName = TCollection_AsciiString("Shape_") + i;
 
   // Add a root to storage data
   Handle(StdStorage_Root) aRoot = new StdStorage_Root(aName, aPShape);
@@ -1386,17 +1407,17 @@ if (anError != Storage_VSOk)
 
 @subsection upgrade_720_Change_In_BRepLib_MakeFace_Algo Change in BRepLib_MakeFace algorithm
 
-  Previously, *BRepLib_MakeFace* algorithm changed orientation of the source wire in order to avoid creation of face as a hole (i.e. it is impossible to create the entire face as a hole; the hole can be created in context of another face only). New algorithm does not reverse the wire if it is open. Material of the face for the open wire will be located on the left side from the source wire.
+Previously, *BRepLib_MakeFace* algorithm changed orientation of the source wire in order to avoid creation of face as a hole (i.e. it is impossible to create the entire face as a hole; the hole can be created in context of another face only). New algorithm does not reverse the wire if it is open. Material of the face for the open wire will be located on the left side from the source wire.
 
 @subsection upgrade_720_Change_In_BRepFill_OffsetWire Change in BRepFill_OffsetWire algorithm
 
-  From now on, the offset  will always be directed to the outer region in case of positive offset value and to the inner region in case of negative offset value.
-  Inner/Outer region for an open wire is defined by the following rule:
-    when we go along the wire (taking into account edges orientation) the outer region will be on the right side, the inner region will be on the left side.
-  In case of a closed wire, the inner region will always be inside the wire (at that, the edges orientation is not taken into account).
-  
+From now on, the offset  will always be directed to the outer region in case of positive offset value and to the inner region in case of negative offset value.
+Inner/Outer region for an open wire is defined by the following rule:
+when we go along the wire (taking into account edges orientation) the outer region will be on the right side, the inner region will be on the left side.
+In case of a closed wire, the inner region will always be inside the wire (at that, the edges orientation is not taken into account).
+
 @subsection upgrade_720_Change_In_GeomAdaptor_Curve Change in Geom(2d)Adaptor_Curve::IsPeriodic
-  
+
 Since 7.2.0 version, method *IsPeriodic()* returns the corresponding status of periodicity of the basis curve regardless of closure status of the adaptor curve (see method *IsClosed()*).
 Method *IsClosed()* for adaptor can return false even on periodic curve, in the case if its parametric range is not full period, e.g. for adaptor on circle in range [0, @f$ \pi @f$].
 In previous versions, *IsPeriodic()* always returned false if *IsClosed()* returned false.
@@ -1410,3 +1431,188 @@ The history of the changing of the initial shape was corrected:
 @subsection upgrade_720_Change_In_RWStl Changes in STL Reader / Writer
 
 Class RWStl now uses class Poly_Triangulation for storing triangular mesh instead of StlMesh data classes; the latter have been removed.
+
+@subsection upgrade_720_New_Error_Warning_system_in_BOA Refactoring of the Error/Warning reporting system in Boolean Component
+
+The Error/Warning reporting system of the algorithms in Boolean Component (in all BOPAlgo_* and BRepAlgoAPI_* algorithms) has been refactored.
+The methods returning the status of errors and warnings of the algorithms (ErrorStatus() and WarningStatus()) have been removed.
+Instead use methods HasErrors() and HasWarnings() to check for presence of errors and warnings, respectively.
+The full list of errors and warnings, with associated data such as problematic sub-shapes, can be obtained by method GetReport().
+
+@section upgrade_occt721 Upgrade to OCCT 7.2.1
+
+@subsection upgrade_721_Changes_In_USD Changes in ShapeUpgrade_UnifySameDomain
+
+The following public methods in the class ShapeUpgrade_UnifySameDomain became protected:
+* *UnifyFaces*
+* *UnifyEdges*
+
+The following public method has been removed:
+* *UnifyFacesAndEdges*
+
+@subsection upgrade_721_Move_BuildPCurveForEdgeOnPlane Moving BuildPCurveForEdgeOnPlane from BOPTools_AlgoTools2D to BRepLib
+
+The methods BuildPCurveForEdgeOnPlane and BuildPCurveForEdgesOnPlane have been moved from the class BOPTools_AlgoTools2D
+to the more lower level class BRepLib.
+
+@subsection upgrade_721_removed Removed features
+
+The following obsolete features have been removed:
+* The package BOPCol has been fully removed:
+  - *BOPCol_BaseAllocator* is replaced with *Handle(NCollection_BaseAllocator)*;
+  - *BOPCol_BoxBndTree* is replaced with *BOPTools_BoxBndTree*;
+  - *BOPCol_Box2DBndTree* is removed as unused;
+  - *BOPCol_DataMapOfIntegerInteger* is replaced with *TColStd_DataMapOfIntegerInteger*;
+  - *BOPCol_DataMapOfIntegerListOfInteger* is replaced with *TColStd_DataMapOfIntegerListOfInteger*;
+  - *BOPCol_DataMapOfIntegerListOfShape* is replaced with *TopTools_DataMapOfIntegerListOfShape*;
+  - *BOPCol_DataMapOfIntegerMapOfInteger.hxx* is removed as unused;
+  - *BOPCol_DataMapOfIntegerReal* is replaced with *TColStd_DataMapOfIntegerReal*;
+  - *BOPCol_DataMapOfIntegerShape* is replaced with *TopTools_DataMapOfIntegerShape*;
+  - *BOPCol_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
+  - *BOPCol_DataMapOfShapeInteger* is replaced with *TopTools_DataMapOfShapeInteger*;
+  - *BOPCol_DataMapOfShapeListOfShape* is replaced with *TopTools_DataMapOfShapeListOfShape*;
+  - *BOPCol_DataMapOfShapeReal* is replaced with *TopTools_DataMapOfShapeReal*;
+  - *BOPCol_DataMapOfShapeShape* is replaced with *TopTools_DataMapOfShapeShape*;
+  - *BOPCol_DataMapOfTransientAddress* is removed as unused;
+  - *BOPCol_IndexedDataMapOfIntegerListOfInteger* is removed as unused;
+  - *BOPCol_IndexedDataMapOfShapeBox* is removed as unused;
+  - *BOPCol_IndexedDataMapOfShapeInteger* is removed as unused;
+  - *BOPCol_IndexedDataMapOfShapeListOfShape* is replaced with *TopTools_IndexedDataMapOfShapeListOfShape*;
+  - *BOPCol_IndexedDataMapOfShapeReal* is removed as unused;
+  - *BOPCol_IndexedDataMapOfShapeShape* is replaced with *TopTools_IndexedDataMapOfShapeShape*;
+  - *BOPCol_IndexedMapOfInteger* is replaced with *TColStd_IndexedMapOfInteger*;
+  - *BOPCol_IndexedMapOfOrientedShape* is replaced with *TopTools_IndexedMapOfOrientedShape*;
+  - *BOPCol_IndexedMapOfShape* is replaced with *TopTools_IndexedMapOfShape*;
+  - *BOPCol_ListOfInteger* is replaced with *TColStd_ListOfInteger*;
+  - *BOPCol_ListOfListOfShape* is replaced with *TopTools_ListOfListOfShape*;
+  - *BOPCol_ListOfShape* is replaced with *TopTools_ListOfShape*;
+  - *BOPCol_MapOfInteger* is replaced with *TColStd_MapOfInteger*;
+  - *BOPCol_MapOfOrientedShape* is replaced with *TopTools_MapOfOrientedShape*;
+  - *BOPCol_MapOfShape* is replaced with *TopTools_MapOfShape*;
+  - *BOPCol_PListOfInteger* is removed as unused;
+  - *BOPCol_PInteger* is removed as unused
+  - *BOPCol_SequenceOfPnt2d* is replaced with *TColgp_SequenceOfPnt2d*;
+  - *BOPCol_SequenceOfReal* is replaced with *TColStd_SequenceOfReal*;
+  - *BOPCol_SequenceOfShape* is replaced with *TopTools_SequenceOfShape*;
+  - *BOPCol_Parallel* is replaced with *BOPTools_Parallel*;
+  - *BOPCol_NCVector* is replaced with *NCollection_Vector*;
+* The class *BOPDS_PassKey* and containers for it have been removed as unused.
+* The unused containers from *IntTools* package have been removed:
+  - *IntTools_DataMapOfShapeAddress* is removed as unused;
+  - *IntTools_IndexedDataMapOfTransientAddress* is removed as unused;
+* The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
+* The class *BOPTools* has been removed as duplicate of the class *TopExp*;
+* The method *BOPAlgo_Builder::Splits()* has been removed as excessive. The method *BOPAlgo_Builder::Images()* can be used instead.
+* The method *BOPTools_AlgoTools::CheckSameGeom()* has been removed as excessive. The method *BOPTools_AlgoTools::AreFacesSameDomain()* can be used instead.
+
+@section upgrade_occt730 Upgrade to OCCT 7.3.0
+
+@subsection upgrade_730_lights Light sources
+
+Multiple changes have been applied to lights management within *TKV3d* and *TKOpenGl*:
+* *V3d_Light* class is now an alias to *Graphic3d_CLight*.
+  *Graphic3d_CLight* is now a Handle class with refactored methods for managing light source parameters.
+  Most methods of *V3d_Light* sub-classes have been preserved to simplify porting.
+* Obsolete debugging functionality for drawing a light source has been removed from *V3d_Light*.
+  Methods and constructors that take parameters for debug display and do not affect the light definition itself have also been removed.
+* Light constructors taking *V3d_Viewer* have been marked as deprecated.
+  Use method *AddLight()* of the class *V3d_Viewer* or *V3d_View* to add new light sources to a scene or a single view, respectively.
+* The upper limit of 8 light sources has been removed.
+* The classes for specific light source types: *V3d_AmbientLight, V3d_DirectionalLight, V3d_PositionalLight* and *V3d_SpotLight* have been preserved, but it is now possible to define the light of any type by creating base class *Graphic3d_CLight* directly. The specific classes only hide unrelated light properties depending on the type of light source.
+* It is no more required to call *V3d_Viewer::UpdateLights()* after modifying the properties of light sources (color, position, etc.)
+
+@subsection upgrade_730_shadingmodels Shading Models
+
+*Graphic3d_AspectFillArea3d* has been extended by a new property *ShadingModel()*, which previously has been defined globally for the entire View.
+
+Previously, a triangle array without normal vertex attributes was implicitly considered as unshaded,
+but now such array will be shaded using *Graphic3d_TOSM_FACET* model (e.g. by computing per-triangle normals).
+Therefore, *Graphic3d_TOSM_UNLIT* should be explicitly specified to disable shading of triangles array.
+Alternatively, a material without reflectance properties can be used to disable shading (as before).
+
+@subsection upgrade_730_tkopengl Custom low-level OpenGL elements
+
+The following API changes should be considered while porting custom *OpenGl_Element* objects:
+* *OpenGl_ShaderManager::BindFaceProgram()*, *BindLineProgram()*, *BindMarkerProgram()* now take enumeration arguments instead of Boolean flags.
+
+@subsection upgrade_730_BOPAlgo_Section Changes in BOPAlgo_Section
+
+The public method *BuildSection()* in the class *BOPAlgo_Section* has become protected. The methods *Perform()* or *PerformWithFiller()* should be called for construction of the result of SECTION operation.
+
+@subsection upgrade_730_BRepAdaptor_CompCurve Changes in BRepAdaptor_CompCurve
+
+The method *BRepAdaptor_CompCurve::SetPeriodic* has been eliminated.
+Since the new version, the method *BRepAdaptor_CompCurve::IsPeriodic()* will always return FALSE. Earlier, it could return TRUE in case if the wire contained only one edge based on a periodic curve. 
+
+@subsection upgrade_730_removed Removed features
+* The methods *SetDeflection*, *SetEpsilonT*, *SetDiscretize* of the class *IntTools_EdgeFace* have been removed as redundant.
+* Deprecated functionality *V3d_View::Export()*, related enumerations Graphic3d_ExportFormat, Graphic3d_SortType
+  as well as optional dependency from gl2ps library have been removed.
+
+@subsection upgrade_730_BuilderSolid Boolean Operations - Solid Builder algorithm
+
+Previously, the unclassified faces of *BOPAlgo_BuilderSolid* algorithm (i.e. the faces not used for solids creation and located outside of all created solids) were used to form an additional (not closed) solid with INTERNAL orientation.
+Since the new version, these unclassified faces are no longer added into the resulting solids. Instead, the @ref occt_algorithms_ers "warning" with a list of these faces appears.
+
+The following public methods of the *BOPAlgo_BuilderSolid* class have been removed as redundant:
+* *void SetSolid(const TopoDS_Solid& theSolid);*
+* *const TopoDS_Solid& Solid() const;*
+
+@subsection upgrade_730_BRepAlgoBO Boolean Operation classes in BRepAlgo are deprecated
+
+The API classes in the package BRepAlgo providing access to old Boolean operations are marked as deprecated:
+* BRepAlgo_Fuse
+* BRepAlgo_Common
+* BRepAlgo_Cut
+* BRepAlgo_Section
+Corresponding classes from the package BRepAlgoAPI should be used instead.
+
+@subsection upgrade_730_replace_CDM_MessageDriver_interface_by_Message_Messenger Unification of the Error/Warning reporting system of Application Framework
+
+Class *CDM_MessageDriver* and its descendants have been removed; class *Message_Messenger* is used instead in all OCAF packages.
+By default, messenger returned by *Message::DefaultMessenger()* is used, thus all messages generated by OCAF are directed in the common message queue of OCCT.
+
+In classes implementing OCAF persistence for custom attributes (those inheriting from *BinMDF_ADriver*, *XmlMDF_ADriver*), uses of method *WriteMessage()* should be replaced by call to method *Send()* of the inherited field *myMessageDriver*. Note that this method takes additional argument indicating the gravity of the message (Trace, Info, Warning, Alarm, or Fail).
+
+Class *Message_PrinterOStream* can be used instead of *CDM_COutMessageDriver* to direct all messages to a stream.
+If custom driver class is used in the application, that class shall be reimplemented inheriting from *Message_Printer* instead of *CDM_MessageDriver*.
+Method *Send()* should be redefined instead of method *Write()* of *CDM_MessageDriver*.
+To use the custom printer in OCAF, it can be either added to default messenger or set into the custom *Message_Messenger* object created in the method *MessageDriver()* of a class inheriting *CDF_Application*.
+
+@section upgrade_occt740 Upgrade to OCCT 7.4.0
+
+@subsection upgrade_740_BRepPrimAPI_MakeRevol Changes in BRepPrimAPI_MakeRevol algorithm
+Previously the algorithm could create a shape with the same degenerated edge shared between some faces. Now it is prevented. The algorithm creates the different copy of this edge for each face. The method *Generated(...)* has been changed in order to apply restriction to the input shape: input shape can be only of type VERTEX, EDGE, FACE or SOLID. For input shape of another type the method always returns empty list.
+
+@subsection upgrade_740_extremaalgo Changes in behavior of Extrema algorithms
+
+Since OCCT 7.4.0 exception is thrown on the attempt of taking points in case of infinite number of solution (IsParallel status). Request of distances is available as before. Method NbExt() always returns 1 in such cases. 
+
+@subsection upgrade_740_removed Removed features
+* The following methods of the class *BRepAlgoAPI_BooleanOperation* have been removed as obsolete or replaced:
+  - *BuilderCanWork* can be replaced with *IsDone* or *HasErrors* method.
+  - *FuseEdges* removed as obsolete.
+  - *RefineEdges* replaced with new method *SimplifyResult*.
+* The method *ImagesResult* of the class *BOPAlgo_BuilderShape* has been removed as unused. The functionality of this method can be completely replaced by the history methods *Modified* and *IsDeleted*.
+* The method *TrackHistory* of the classes *BOPAlgo_RemoveFeatures* and *BRepAlgoAPI_Defeaturing* has been renamed to *SetToFillHistory*.
+* The method *GetHistory* of the class *BRepAlgoAPI_Defeaturing* has been renamed to *History*.
+
+@subsection upgrade_740_localcontext Local Context removal
+
+Previously deprecated Local Context functionality has been removed from AIS package,
+so that related methods have been removed from AIS_InteractiveContext interface:
+*HasOpenedContext()*, *HighestIndex()*, *LocalContext()*, *LocalSelector()*, *OpenLocalContext()*, *CloseLocalContext()*,
+*IndexOfCurrentLocal()*, *CloseAllContexts()*, *ResetOriginalState()*, *ClearLocalContext()*, *UseDisplayedObjects()*, *NotUseDisplayedObjects()*,
+*SetShapeDecomposition()*, *SetTemporaryAttributes()*, *ActivateStandardMode()*, *DeactivateStandardMode()*, *KeepTemporary()*,
+*SubIntensityOn()*, *SubIntensityOff()*, *ActivatedStandardModes()*, *IsInLocal()*, *AddOrRemoveSelected()* taking TopoDS_Shape.
+
+A set of deprecated methods previously related to Local Context and now redirecting to other methods has been preserved to simplify porting; they will be removed in next release.
+
+@subsection upgrade_740_geomconvert Changes in behavior of Convert algorithms
+
+Now methods *GeomConvert::ConcatG1*, *GeomConvert::ConcatC1*, *Geom2dConvert::ConcatG1*, *Geom2dConvert::ConcatC1* modify the input argument representing the flag of closedness.
+
+@subsection upgrade_740_selection Changes in selection API and picked point calculation algorithm.
+
+*SelectBasics_PickResult* structure has been extended, so that it now defines 3D point on detected entity in addition to Depth value along picking ray.
+*SelectMgr_SelectingVolumeManager::Overlap()* methods have been corrected to fill in *SelectBasics_PickResult* structure (depth and 3D point) instead of only depth value, so that custom *Select3D_SensitiveEntity* implementation should be updated accordingly (including *Select3D_SensitiveSet* subclasses).

dox/overview/overview.md

@@ -18,7 +18,7 @@ modeling (CAD), manufacturing / measuring (CAM) or numerical simulation (CAE).
 @section OCCT_OVW_SECTION_2 Copyrights
 
 Open CASCADE Technology and all materials, including this documentation, is 
-Copyright (c) 1999-2016 by OPEN CASCADE S.A.S. All rights reserved.
+Copyright (c) 1999-2018 by OPEN CASCADE S.A.S. All rights reserved.
 
 @htmlonly<center>@endhtmlonly
 https://www.opencascade.com
@@ -28,13 +28,22 @@ https://www.opencascade.com
  License
 --------
 
-Open CASCADE Technology is free software; you can redistribute it and / or 
-modify it under the terms of the 
-@ref license_lgpl_21 "GNU Lesser General Public License (LGPL) version 2.1", 
-with additional @ref occt_lgpl_exception "exception".
+Open CASCADE Technology is free software; you can redistribute it and / or modify it under the terms of the 
+@ref license_lgpl_21 "GNU Lesser General Public License (LGPL) version 2.1", with additional @ref occt_lgpl_exception "exception".
 
-Alternatively, Open CASCADE Technology may be used under the terms of Open 
-CASCADE commercial license or contractual agreement.
+Note that LGPL imposes some obligations on the application linked with Open CASCADE Technology.
+If you wish to use OCCT in a proprietary application, please pay a special attention to address the requirements of LGPL section 6.
+At minimum the following should be considered:
+1. Add the notice visible to the users of your application clearly stating that Open CASCADE Technology is used in this application, and that they have rights in this regard according to LGPL. 
+   Such notice can be added in About dialog box (this is mandatory if this box contains copyright statements) or a similar place and/or in the documentation. 
+   The text of LGPL license should be accessible to the user.
+2. Make the copy of OCCT sources used by the application available to its users, and if necessary provide instructions on how to build it in a way compatible with the application.
+3. Ensure that the user actually can exercise the right to run your application with a modified version of OCCT. 
+   If the application is distributed in a form that does not allow the user to modify OCCT part (e.g. the application is linked to OCCT statically or is distributed via AppStore on iOS, GooglePlay on Android, Windows Store, etc.), 
+   the application should be provided separately in a modifiable form, with all materials needed for the user to be able to run the application with a modified version of OCCT.
+
+If you want to use Open CASCADE Technology without being bound by LGPL requirements, 
+please <a href="https://www.opencascade.com/contact">contact Open CASCADE company</a> for a commercial license.
 
 Note that Open CASCADE Technology is provided on an "AS IS" basis, WITHOUT 
 WARRANTY OF ANY KIND. The entire risk related to any use of the OCCT code and 
@@ -46,7 +55,7 @@ disclaimer.
 
 You are hereby informed that all software is a property of its respective authors and is protected by 
 international and domestic laws on intellectual property and trademarks. 
-Should you need further information, please directly contact the authors.
+Should you need further information, directly contact the authors.
 
 **CAS.CADE** and **Open CASCADE** are registered trademarks of 
 OPEN CASCADE S.A.S.
@@ -71,7 +80,7 @@ and, in case you need any further information, directly contact their authors.
 **Qt** is a cross-platform application framework that is widely used for developing application software 
 with graphical user interface (GUI). Qt is free and open source software distributed under 
 the terms of the GNU Lesser General Public License. In OCCT Qt is used for programming samples. 
-If you need further information on Qt, please, refer to Qt Homepage (https://www.qt.io/)
+If you need further information on Qt, refer to Qt Homepage (https://www.qt.io/)
 
 **Tcl** is a high-level programming language. Tk is a graphical user interface (GUI) toolkit, 
 with buttons, menus, listboxes, scrollbars, and so on. Taken together Tcl and Tk provide a solution 
@@ -79,53 +88,52 @@ to develop cross-platform graphical user interfaces with a native look and feel.
 Scriptics Corp., Sun Microsystems, and other companies. However, Tcl/Tk is an open source, and 
 the copyright allows you to use, modify, and redistribute Tcl/Tk for any purpose, without an 
 explicit license agreement and without paying any license fees or royalties. 
-To use Tcl/Tk, please refer to the Licensing Terms (https://www.tcl.tk/software/tcltk/license.html).
-
-**GL2PS** is developed by Christophe Geuzaine and others. It is optionally used by OCCT to
-export content of OpenGL scene to vector graphics formats (PS, PDF, EMF, SVG). 
-The library is licensed under GL2PS LICENSE https://www.geuz.org/gl2ps/COPYING.GL2PS Version 2, November 2003.
+To use Tcl/Tk, refer to the Licensing Terms (https://www.tcl.tk/software/tcltk/license.html).
 
 **FreeType 2** is developed by Antoine Leca, David Turner, Werner Lemberg and others. 
 It is a software font engine that is designed to be small, efficient, highly customizable and 
 portable while capable of producing high-quality output (glyph images). This product 
 can be used in graphic libraries, display servers, font conversion tools, 
 text image generation tools, and many other products.
-
-FreeType 2 is released under two open-source licenses: BSD-like FreeType License and the GPL.
+FreeType 2 is released under two open-source licenses: BSD-like FreeType License and the GPL (https://www.freetype.org/license.html).
 
 **Intel(R) Threading Building Blocks (TBB)** offers a rich and complete approach to expressing parallelism in a C++ program. 
 It is a library that helps you to take advantage of multi-core processor performance without having to be a threading expert. 
 Threading Building Blocks is not just a threads-replacement library. It represents a higher-level, task-based parallelism that 
 abstracts platform details and threading mechanisms for scalability and performance. 
-TBB is available under GPLv2 license with the runtime exception.
+TBB version 2017 is available under Apache 2.0 license, while older versions 
+until 4.4 are available under GPLv2 license with the runtime exception (https://www.threadingbuildingblocks.org).
 
 **OpenGL** is an industry standard API for 3D graphics used by OCCT for 
 implementation of 3D viewer. OpenGL specification is developed by the
 Khronos group, https://www.khronos.org/opengl/. OCCT code includes header 
 file *glext.h* obtained from Khronos web site.
 
-**VTK** -- The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, please, refer to VTK Homepage https://www.vtk.org/.
+**VTK** -- The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, refer to VTK Homepage http://www.vtk.org/.
 
 **Doxygen** developed by Dimitri van Heesch is open source documentation system for 
 C++, C, Java, Objective-C, Python, IDL, PHP and C#. This product is used in Open CASCADE Technology 
 for automatic creation of Technical Documentation from C++ header files. 
-If you need further information on Doxygen, please refer to https://www.stack.nl/~dimitri/doxygen/index.html.
+If you need further information on Doxygen, refer to https://www.stack.nl/~dimitri/doxygen/index.html.
 
 **Graphviz** is open source graph visualization software developed by John Ellson, Emden Gansner, Yifan Hu and Arif Bilgin. 
 Graph visualization is representiation of structured information as diagrams of abstract graphs and networks. 
 This product is used together with Doxygen in Open CASCADE Technology for automatic creation of Technical Documentation 
 (generation of dependency graphs). Current versions of Graphviz are licensed on an open source 
-basis under The Eclipse Public License (EPL) (https://www.graphviz.org/License.php).
+basis under The Eclipse Public License (EPL) (http://www.graphviz.org/License.php).
 
 **Inno Setup** is a free script-driven installation system created in CodeGear Delphi by Jordan Russell. 
 In OCCT Inno Setup is used to create Installation Wizard on Windows. 
-It is licensed under Inno Setup License (https://www.jrsoftware.org/files/is/license.txt).
+It is licensed under Inno Setup License (http://www.jrsoftware.org/files/is/license.txt).
 
 **FreeImage** is an Open Source library supporting popular graphics image formats, such as PNG, BMP, JPEG, TIFF, 
 and others used by multimedia applications. This library is developed by Hervé Drolon and Floris van den Berg. 
 FreeImage is easy to use, fast, multithreading safe, compatible with all 32-bit or 64-bit versions of Windows, 
 and cross-platform (works both with Linux and Mac OS X). FreeImage is optionally used by OCCT to work
-with images, on conditions of the FreeImage Public License (FIPL) (https://freeimage.sourceforge.net/freeimage-license.txt).
+with images, on conditions of the FreeImage Public License (FIPL) (http://freeimage.sourceforge.net/freeimage-license.txt).
+
+**David M. Gay's floating point routines** (dtoa.c) are used for fast reading of floating point values from text strings.
+These routines are available under MIT-like license (see http://www.netlib.org/fp/).
 
 **CMake** is an open-source, cross-platform family of tools designed to build, test and package software. CMake is used to control the software compilation process using simple platform and compiler independent configuration files, and generate native makefiles and workspaces that can be used in the compiler environment of your choice. 
 OCCT uses CMake as a build system. CMake is available under BSD 3-Clause license. See more at https://cmake.org/
@@ -196,9 +204,9 @@ for which OCCT is certified to work.
 
 | OS        | Compiler |
 | --------- | ----------- |
-| Windows   | Microsoft Visual Studio: 2010 SP1<sup>1</sup>, 2012 Update 4, 2013 Update 5, 2015 <br> Intel C++ Composer XE 2013 SP1 <br> GCC 4.3+ (Mingw-w64)|
+| Windows   | Microsoft Visual Studio: 2008 SP1, 2010 SP1<sup>1</sup>, 2012 Update 4, 2013 Update 5, 2015, 2017 <br> GCC 4.3+ (Mingw-w64)|
 | Linux     | GNU gcc 4.3+ <br> LLVM CLang 3.6+ |
-| OS X      | XCode 6 or newer |
+| OS X / macOS | XCode 6 or newer |
 | Android   | NDK r10, GNU gcc 4.8 or newer |
 
 1) VC++ 10 64-bit is used for regular testing and for building 
@@ -209,15 +217,14 @@ for which OCCT is certified to work.
 | Component | Requirement |
 | --------- | ----------- |
 | Graphic library | OpenGL 3.3+, OpenGL ES 2.0+ <br> Direct3D 9 |
-| Qt (for samples and demos) | Desktop: Qt 4.8.6+ http://www.qt.io/download/ <br> Android: Qt 5.3.2+ http://www.qt.io/download/ |
-| TCL (for testing tools)    | Tcl/Tk 8.6.3+ http://www.tcl.tk/software/tcltk/download.html <br> or ActiveTcl 8.6 http://www.activestate.com/activetcl/downloads (for Windows)| 
-| Freetype (for text rendering) | FreeType 2.4.11-2.5.5 http://sourceforge.net/projects/freetype/files/ |
-| FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ http://sourceforge.net/projects/freeimage/files |
-| FFmpeg (optional, for video recording) | FFmpeg 3.1+ https://www.ffmpeg.org |
-| gl2ps (optional, for export contents of OCCT viewer to vector formats) | gl2ps-1.3.8+  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x http://www.threadingbuildingblocks.org/ |
-| VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/VTK/resources/software.html |
-| Doxygen (optional for building documentation) | Doxygen 1.8.5+ http://www.stack.nl/~dimitri/doxygen/download.html |
+| Qt (for samples and demos) | Desktop: Qt 4.8.6+ https://www.qt.io/download/ <br> Android: Qt 5.3.2+ https://www.qt.io/download/ |
+| TCL (for testing tools)    | Tcl/Tk 8.6.3+ https://www.tcl.tk/software/tcltk/download.html <br> or ActiveTcl 8.6 https://www.activestate.com/activetcl/downloads (for Windows)| 
+| Freetype (for text rendering) | FreeType 2.4.11-2.7.1 https://sourceforge.net/projects/freetype/files/ |
+| FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ https://sourceforge.net/projects/freeimage/files |
+| FFmpeg (optional, for video recording) | FFmpeg 3.1+ https://www.ffmpeg.org/download.html |
+| Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x https://www.threadingbuildingblocks.org/ |
+| VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/download/ |
+| Doxygen (optional for building documentation) | Doxygen 1.8.5+ https://www.stack.nl/~dimitri/doxygen/download.html |
 
 @subsection overview_req_hw Hardware
 
@@ -274,13 +281,13 @@ When the installation is complete, you will find the directories for 3rd party p
 
 @figure{/overview/images/overview_3rdparty.png}
 
-The contents of the OCCT-7.0.0 directory (called further "OCCT root", or $CASROOT) are as follows:
+The contents of the OCCT-7.3.0 directory (called further "OCCT root", or $CASROOT) are as follows:
 
 @figure{/overview/images/overview_installation.png, "The directory tree"}
 
   * **adm**   This folder contains administration files, which allow rebuilding OCCT;
   * **adm/cmake**  This folder contains files of CMake building procedure;
-  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++  2005, 2008, 2010, 2012 and 2013 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
+  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++ 2010, 2012, 2013, 2015 and 2017 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
   * **data**  This folder contains CAD files in different formats, which can be used to test the OCCT functionality;
   * **doc**  This folder contains OCCT documentation in HTML and PDF format;
   * **dox**  This folder contains sources of OCCT documentation in plain text (MarkDown) format;
@@ -288,6 +295,7 @@ The contents of the OCCT-7.0.0 directory (called further "OCCT root", or $CASROO
   * **samples**  This folder contains sample applications.
   * **src**  This folder contains OCCT source files. They are organized in folders, one per development unit;
   * **tests**  This folder contains scripts for OCCT testing.
+  * **tools**  This folder contains sources of Inspector tool.
   * **win64/vc10**  This folder contains executable and library files built in optimize mode for Windows platform by Visual C++  2010;
 
 @section OCCT_OVW_SECTION_4_2 Environment Variables
@@ -298,7 +306,7 @@ To run any Open CASCADE Technology application you need to set the environment v
 
 You can define the environment variables with env.bat script located in the 
 $CASROOT folder. This script accepts two arguments to be used: 
-the version of Visual Studio (vc8 -- vc12) and the architecture (win32 or win64).
+the version of Visual Studio (vc10 -- vc141) and the architecture (win32 or win64).
 
 The additional environment settings necessary for compiling OCCT libraries and samples 
 by Microsoft Visual Studio can be set using script custom.bat located in the same folder. 
@@ -388,7 +396,7 @@ the specified resource file and activates the commands implemented in the plug-i
 The whole process of using the plug-in mechanism as well as the instructions for extending Test Harness is described in the @ref occt_user_guides__test_harness.
 
 Draw Test Harness provides an environment for OCCT automated testing system. 
-Please, consult its @ref occt_dev_guides__tests "Automated Testing System" for details.
+Check its @ref occt_dev_guides__tests "Automated Testing System" for details.
 
 Remarks:
 
@@ -534,11 +542,11 @@ Export:
   * Stl
   * Vrml
 
-See \subpage samples_csharp_occt "Readme" for details.
+See \subpage samples_csharp_occt "C# sample Readme" for details.
 
 There is also another C# example with the same functionality, which demonstrates the integration of Direct3D Viewer into .NET applications using WPF front end.
 
-See \subpage samples_csharp_direct3d "Readme" for details.
+See \subpage samples_csharp_direct3d "Direct3D C# sample Readme" for details.
 
 @subsubsection OCCT_OVW_SECTION_7_3_4 Android
 
@@ -546,8 +554,16 @@ There are two samples are representing usage OCCT framework on Android mobile pl
 
 jniviewer
 @figure{/overview/images/samples_java_android_occt.jpg}
-Java -- See \subpage samples_java_android_occt "Readme" for details.
+Java -- See \subpage samples_java_android_occt "Android Java sample Readme" for details.
 
 AndroidQt
 @figure{/overview/images/samples_qml_android_occt.jpg}
-Qt -- See \subpage samples_qml_android_occt "Readme" for details.
+Qt -- See \subpage samples_qml_android_occt "Android Qt sample Readme" for details.
+
+@subsubsection OCCT_OVW_SECTION_7_3_5 iOS
+
+There is a sample demonstrating usage of OCCT on iOS with Apple UIKit framework.
+
+@figure{/overview/images/sample_ios_uikit.png}
+
+See \subpage occt_samples_ios_uikit "iOS sample Readme" for details.

dox/technical_overview/technical_overview.md

@@ -56,7 +56,7 @@ This module also provides a variety of general-purpose services, such as:
   * Progress indication and user break interfaces, giving a possibility even for low-level algorithms to communicate with the user in a universal and convenient way;
   * and many others...
 
-Please, see the details in @ref occt_user_guides__foundation_classes "Foundation Classes User's Guide"
+See the details in @ref occt_user_guides__foundation_classes "Foundation Classes User's Guide"
 
 See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
 
@@ -85,7 +85,7 @@ Topology defines relationships between simple geometric entities.  A shape, whic
 
 Complex shapes can be defined as assemblies of simpler entities.
 
-Please, see the details in @ref occt_user_guides__modeling_data "Modeling Data User's Guide"
+See the details in @ref occt_user_guides__modeling_data "Modeling Data User's Guide"
 
 3D geometric models can be stored in OCCT native BREP format.
 See @ref occt_user_guides__brep_wp "BREP Format Description White Paper" for details on the format.
@@ -147,7 +147,7 @@ See @ref occt_user_guides__boolean_operations "Boolean Operations" User's Guide
 
 @figure{/technical_overview/images/0004.png}
  
-Please, see the details in @ref occt_user_guides__modeling_algos "Modeling Algorithms User's Guide".
+See the details in @ref occt_user_guides__modeling_algos "Modeling Algorithms User's Guide".
 
 See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
 
@@ -204,7 +204,7 @@ Here are just a few examples:
 
 @figure{/technical_overview/images/0008.png, "Display of shape cross-section and dimensions"}
 
-For more details see @ref occt_user_guides__visualization "Visualization User's Guide".
+For more details, see @ref occt_user_guides__visualization "Visualization User's Guide".
 
 The visualization of OCCT topological shapes by means of VTK library provided by VIS component is described in a separate @ref occt_user_guides__vis "VTK Integration Services" User's Guide.
 
@@ -263,7 +263,7 @@ Each sub-domain of Shape Healing has its own scope of functionality:
 | Customization | Modifies the shape representation to fit specific needs. | The shape is not modified, only the mathematical form of its internal representation is changed. |
 | Processing | Mechanism of shape modification via a user-editable resource file. | |
 
-For more details refer to @ref occt_user_guides__shape_healing "Shape Healing User's guide".
+For more details, refer to @ref occt_user_guides__shape_healing "Shape Healing User's guide".
 
 See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
 
@@ -285,7 +285,7 @@ OCAF differs from any other CAD framework in the organization of application dat
 
 OCAF organizes and embeds these attributes in a document. OCAF documents, in their turn, are managed by an OCAF application.
 
-For more details see @ref occt_user_guides__ocaf "OCAF User's Guide". 
+For more details, see @ref occt_user_guides__ocaf "OCAF User's Guide". 
 
 See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
 
@@ -310,4 +310,4 @@ In addition, **Test Harness** provides commands to create and manipulate curves
 
 You can add custom commands to test or demonstrate any new functionalities, which you develop.
 
-For more details see @ref occt_user_guides__test_harness "Draw Test Harness Manual".
+For more details, see @ref occt_user_guides__test_harness "Draw Test Harness Manual".

dox/user_guides/boolean_operations/images/operations_image020.svg

@@ -1,296 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="488.59842"
-   height="239.24245"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="operations_image020.svg">
-  <defs
-     id="defs4">
-    <marker
-       inkscape:stockid="Arrow2Lstart"
-       orient="auto"
-       refY="0.0"
-       refX="0.0"
-       id="Arrow2Lstart"
-       style="overflow:visible">
-      <path
-         id="path7116"
-         style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round"
-         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
-         transform="scale(1.1) translate(1,0)" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow2Mend"
-       orient="auto"
-       refY="0.0"
-       refX="0.0"
-       id="Arrow2Mend"
-       style="overflow:visible;">
-      <path
-         id="path7125"
-         style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;"
-         d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z "
-         transform="scale(0.6) rotate(180) translate(0,0)" />
-    </marker>
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect2990"
-         height="19.040462"
-         width="177.28004"
-         y="73.463196"
-         x="191.21669" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect2993"
-         height="19.040462"
-         width="176.83047"
-         y="12.743616"
-         x="192.41554" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect2996"
-         height="18.890537"
-         width="177.28004"
-         y="133.13332"
-         x="191.21669" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath4"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect2999"
-         height="18.890537"
-         width="149.10706"
-         y="204.34763"
-         x="130.52487" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath5"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect3002"
-         height="18.890537"
-         width="148.9572"
-         y="204.34763"
-         x="292.81927" />
-    </clipPath>
-    <marker
-       inkscape:stockid="Arrow2Lstart"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Lstart-3"
-       style="overflow:visible">
-      <path
-         inkscape:connector-curvature="0"
-         id="path7116-4"
-         style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="matrix(1.1,0,0,1.1,1.1,0)" />
-    </marker>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="2.1979709"
-     inkscape:cx="318.63273"
-     inkscape:cy="137.81983"
-     inkscape:document-units="px"
-     inkscape:current-layer="g3004"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="1670"
-     inkscape:window-height="723"
-     inkscape:window-x="42"
-     inkscape:window-y="158"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata7">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-153.88697,-412.74096)">
-    <g
-       id="g3004"
-       transform="translate(153.4374,405.50687)">
-      <text
-         id="text3006"
-         style="font-size:13.78678322px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Calibri"
-         y="246.47653"
-         x="0.44956902"
-         xml:space="preserve"> </text>
-      <path
-         id="path3008"
-         d="m 279.61319,66.547912 -0.0468,-23.360172 c -0.009,-0.346702 0.27162,-0.627811 0.61816,-0.627811 0.34654,0 0.62752,0.281109 0.62752,0.61844 l 0.0468,23.369543 c 0,0.337331 -0.28098,0.61844 -0.61815,0.61844 -0.34655,0.0094 -0.62753,-0.271738 -0.62753,-0.61844 z m -3.17508,-22.104551 3.73704,-7.505615 3.75578,7.486874 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:0.14985634px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3010"
-         d="m 281.04619,126.53661 -0.59005,-22.61992 c 0,-0.3467 0.27161,-0.62781 0.60879,-0.63718 0.34654,-0.009 0.63689,0.26237 0.64625,0.60907 l 0.5807,22.61055 c 0.009,0.3467 -0.26225,0.62781 -0.59943,0.63718 -0.34654,0.009 -0.63689,-0.26237 -0.64626,-0.5997 z m -3.67148,-21.28933 3.54973,-7.589952 3.93373,7.393172 z"
-         style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:0.14985634px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3016"
-         d="m 190.63599,68.421973 0,28.916764 178.32904,0 0,-28.916764 -178.32904,0 z"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3018"
-         d="m 190.647,68.432978 0,28.894754 186.95136,0 0,-28.894754 z"
-         style="fill:none;stroke:#000000;stroke-width:0.95861244px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3020"
-         style="font-size:13.68622589px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="84.089729"
-         x="203.04033"
-         xml:space="preserve"
-         transform="scale(0.99270628,1.0073473)">BOPAlgo_BuilderShape</text>
-      <text
-         id="text3024"
-         style="font-size:13.78678322px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="102.69855"
-         x="283.97775"
-         xml:space="preserve"> </text>
-      <path
-         id="path3026"
-         d="m 191.75992,7.7023914 0,28.9167636 177.9544,0 0,-28.9167636 -177.9544,0 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3028"
-         d="m 191.7698,7.7122711 0,28.8970039 185.66905,0 0,-28.8970039 z"
-         style="fill:none;stroke:#000000;stroke-width:0.95636153px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3030"
-         style="font-size:13.78678322px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="23.987984"
-         x="231.37817"
-         xml:space="preserve">BOPAlgo_Algo</text>
-      <text
-         id="text3032"
-         style="font-size:13.78678322px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="23.987984"
-         x="330.28336"
-         xml:space="preserve"> </text>
-      <path
-         id="path3034"
-         d="m 190.63599,128.01712 0,28.91676 178.32904,0 0,-28.91676 -178.32904,0 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3036"
-         d="m 190.64871,128.02984 0,28.89132 188.31283,0 0,-28.89132 z"
-         style="fill:none;stroke:#000000;stroke-width:0.96203959px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3038"
-         style="font-size:13.78678322px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="144.37767"
-         x="218.04097"
-         xml:space="preserve">BOPAlgo_Builder</text>
-      <text
-         id="text3040"
-         style="font-size:13.78678322px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="144.37767"
-         x="341.67245"
-         xml:space="preserve"> </text>
-      <path
-         id="path3042"
-         d="m 129.94418,199.23144 0,28.91677 150.04365,0 0,-28.91677 -150.04365,0 z"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3050"
-         style="font-size:13.78678322px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="233.43306"
-         x="213.24557"
-         xml:space="preserve"> </text>
-      <path
-         id="path3052"
-         d="m 292.16366,199.23144 0,28.91677 150.04366,0 0,-28.91677 -150.04366,0 z"
-         clip-path="url(#clipEmfPath4)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3054"
-         d="m 67.466014,185.63759 0,28.80655 188.150506,0 0,-28.80655 z"
-         style="fill:none;stroke:#000000;stroke-width:1.04681468px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3056"
-         style="font-size:13.78678322px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="204.21788"
-         x="124.58641"
-         xml:space="preserve">BOPAlgo_BOP</text>
-      <text
-         id="text3058"
-         style="font-size:13.78678322px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="215.592"
-         x="412.70435"
-         xml:space="preserve"> </text>
-      <path
-         id="path3054-8"
-         d="m 300.37408,185.70141 0,28.80655 188.1505,0 0,-28.80655 z"
-         style="fill:none;stroke:#000000;stroke-width:1.04681468px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3056-9"
-         style="font-size:13.78678322px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="203.31017"
-         x="336.76245"
-         xml:space="preserve">BOPAlgo_Section</text>
-      <path
-         style="fill:none;stroke:#000000;stroke-width:0.95747238px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-start:url(#Arrow2Lstart);marker-end:none"
-         d="m 267.10914,158.63892 -77.87032,26.89356"
-         id="path13459"
-         inkscape:connector-curvature="0" />
-      <path
-         style="fill:none;stroke:#000000;stroke-width:0.88220716px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-start:url(#Arrow2Lstart);marker-end:none"
-         d="m 316.41379,158.50756 65.91804,26.97147"
-         id="path13459-4"
-         inkscape:connector-curvature="0" />
-    </g>
-  </g>
-</svg>

dox/user_guides/boolean_operations/images/operations_image064.svg

@@ -1,238 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="500.70731"
-   height="102.98"
-   id="svg3731"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="operations_image064.svg">
-  <defs
-     id="defs3733">
-    <marker
-       inkscape:stockid="Arrow2Mstart"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow2Mstart"
-       style="overflow:visible">
-      <path
-         id="path4673"
-         style="fill-rule:evenodd;stroke-width:0.625;stroke-linejoin:round"
-         d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
-         transform="scale(0.6,0.6)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <marker
-       inkscape:stockid="Arrow1Lstart"
-       orient="auto"
-       refY="0"
-       refX="0"
-       id="Arrow1Lstart"
-       style="overflow:visible">
-      <path
-         id="path4649"
-         d="M 0,0 5,-5 -12.5,0 5,5 0,0 z"
-         style="fill-rule:evenodd;stroke:#000000;stroke-width:1pt"
-         transform="matrix(0.8,0,0,0.8,10,0)"
-         inkscape:connector-curvature="0" />
-    </marker>
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect3744"
-         height="157.5"
-         width="566.85828"
-         y="0"
-         x="0" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect3747"
-         height="15"
-         width="134.10196"
-         y="14.7"
-         x="215.55315" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect3750"
-         height="13.95"
-         width="158.85233"
-         y="118.5"
-         x="53.850784" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath4"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect3753"
-         height="15"
-         width="189.90277"
-         y="68.849998"
-         x="185.10271" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath5"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect3756"
-         height="13.95"
-         width="180.15263"
-         y="118.2"
-         x="315.3046" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1.7435336"
-     inkscape:cx="250.35365"
-     inkscape:cy="74.48907"
-     inkscape:document-units="px"
-     inkscape:current-layer="g3758"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="1037"
-     inkscape:window-height="615"
-     inkscape:window-x="38"
-     inkscape:window-y="209"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata3736">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(204.63937,-395.29983)">
-    <g
-       id="g3758"
-       transform="translate(-262.09021,339.42982)">
-      <text
-         id="text3760"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="142.64999"
-         x="558.15814"
-         xml:space="preserve"> </text>
-      <path
-         id="path3762"
-         d="m 214.87814,10.5 0,23.4375 135.43322,0 0,-23.4375 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:none;stroke:#000000;stroke-width:1.25626838px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0"
-         transform="translate(-1.4412873,56.78124)" />
-      <text
-         id="text3764"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="80.110596"
-         x="236.44154"
-         xml:space="preserve">BOPAlgo_Algo</text>
-      <text
-         id="text3766"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="25.049999"
-         x="327.60477"
-         xml:space="preserve"> </text>
-      <path
-         id="path3768"
-         d="m 53.175776,114.3 0,22.37812 160.127334,0 0,-22.37812 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:none;stroke:#000000;stroke-width:1.24689317px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3772"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="128.85001"
-         x="204.603"
-         xml:space="preserve"> </text>
-      <text
-         id="text3774"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="158.85001"
-         x="57.45084"
-         xml:space="preserve"> </text>
-      <path
-         id="path3776"
-         d="m 280.56035,62.94375 -0.59064,-22.621875 c -0.009,-0.346875 0.26251,-0.6375 0.60939,-0.646875 0.34688,-0.0094 0.62813,0.2625 0.63751,0.609375 l 0.59063,22.63125 c 0.009,0.346875 -0.2625,0.628125 -0.60938,0.6375 -0.34688,0.0094 -0.62814,-0.2625 -0.63751,-0.609375 z m -3.68443,-21.290625 3.55317,-7.603125 3.94694,7.40625 z"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:0.1500022px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3778"
-         d="m 185.00124,121.96729 0,23.4375 191.2528,0 0,-23.4375 z"
-         style="fill:none;stroke:#000000;stroke-width:1.25626838px;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3780"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="135.98123"
-         x="213.3766"
-         xml:space="preserve">BOPAlgo_PaveFiller</text>
-      <text
-         id="text3782"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="79.199997"
-         x="351.30511"
-         xml:space="preserve"> </text>
-      <text
-         id="text3784"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="108.3"
-         x="188.70276"
-         xml:space="preserve"> </text>
-      <path
-         id="path3786"
-         d="m 198.98728,113.10938 20.70968,-20.700005 c 0.24375,-0.24375 0.63751,-0.24375 0.88126,0 0.24375,0.24375 0.24375,0.6375 0,0.88125 L 199.87792,114 c -0.24376,0.24375 -0.64689,0.24375 -0.89064,0 -0.24375,-0.24375 -0.24375,-0.64688 0,-0.89062 z m 17.61588,-22.031255 7.95012,-2.653125 -2.64379,7.959375 z"
-         clip-path="url(#clipEmfPath4)"
-         style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:0.1500022px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3794"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Courier New"
-         y="128.55"
-         x="480.30701"
-         xml:space="preserve"> </text>
-      <text
-         id="text3796"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="158.39999"
-         x="318.75464"
-         xml:space="preserve"> </text>
-      <path
-         style="fill:#916f6f;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-start:url(#Arrow2Mstart)"
-         d="m 281.70806,91.744904 0,30.398036"
-         id="path3875"
-         inkscape:connector-curvature="0" />
-    </g>
-  </g>
-</svg>

dox/user_guides/foundation_classes/foundation_classes.md

@@ -1682,7 +1682,7 @@ All these functions are provided by geometric processor package <i> gp</i>. Its
 
 The *gp* package defines the basic geometric entities used for algebraic calculation and basic analytical geometry  in 2d & 3d space. It also provides basic transformations such as identity,  rotation, translation, mirroring, scale transformations, combinations of  transformations, etc. Entities are handled by value.  
 
-Please, note that <i> gp</i> curves and surfaces are analytic: there is no parameterization and no orientation on <i>gp</i> entities, i.e. these entities do not provide functions which work with these properties. 
+Note that <i> gp</i> curves and surfaces are analytic: there is no parameterization and no orientation on <i>gp</i> entities, i.e. these entities do not provide functions which work with these properties. 
 
 If you need, you may use more evolved data structures provided by <i> Geom</i> (in 3D space) and <i> Geom2d</i> (in the plane). However, the definition of <i> gp</i> entities is identical to the one of equivalent <i> Geom</i> and <i> Geom2d</i> entities, and they are located in the plane or in space with the same kind of positioning systems. They implicitly contain the orientation, which they express on the <i> Geom </i> and <i> Geom2d </i> entities, and they induce the definition of their parameterization.
 

dox/user_guides/iges/iges.md

@@ -9,7 +9,7 @@ The IGES interface reads IGES files and translates them to Open CASCADE Technolo
 
 Other kinds of data such as colors and names can be read or written with the help of XDE tools <i> IGESCAFControl_Reader</i> and <i> IGESCAFControl_Writer</i>. 
 
-Please, note:
+**Note** :
 
   * an IGES model is an IGES file that has been loaded into memory.
   * an IGES entity is an entity in the IGES normal sense.
@@ -251,7 +251,7 @@ Default value is 0.01.
 <h4>read.iges.bspline.approxd1.mode</h4>
 This parameter is obsolete (it is rarely used in real  practice). If set to True, it affects the translation of bspline curves of  degree 1 from IGES: these curves (which geometrically are polylines) are split  by duplicated points, and the translator attempts to convert each of the  obtained parts to a bspline of a higher continuity.  
 
-Read this parameter  with:  
+Read this parameter with:  
 ~~~~~
 Standard_Real bam =   Interface_Static::CVal("read.iges.bspline.approxd1.mode"); 
 ~~~~~
@@ -266,9 +266,9 @@ Default value is Off.
 <h4>read.iges.resource.name and read.iges.sequence</h4>
 These two parameters define the name of the resource file  and the name of the sequence of operators   (defined in that file) for Shape Processing, which is automatically performed  by the IGES   translator. The Shape Processing is a user-configurable step, which is  performed after   the translation and consists in application of a set of operators to a  resulting shape. This is   a very powerful tool allowing to customize the shape and to adapt it to the  needs of   a receiving application. By default, the sequence consists of a single operator  *ShapeFix* that calls Shape Healing from the IGES translator.  
 
-Please find an example of the resource file for IGES (which  defines parameters   corresponding to the sequence applied by default, i.e. if the resource file is  not found) in   the Open CASCADE Technology installation, by the path   <i>%CASROOT%/src/XSTEPResource/IGES</i> . 
+Find an example of the resource file for IGES (which  defines parameters corresponding to the sequence applied by default, i.e. if the resource file is  not found) in the Open CASCADE Technology sources by the path <i>%CASROOT%/src/XSTEPResource/IGES</i>. 
 
-In order for the IGES translator to use that file, you have  to define the environment variable   *CSF_IGESDefaults*, which should point to the directory where the resource file  resides.   Note that if you change parameter *read.iges.resource.name*, you should change  the name   of the resource file and the name of the environment variable correspondingly.  The variable should contain a path to the resource file. 
+IGES translator will use that file if you define the environment variable *CSF_IGESDefaults*, which should point to the directory where the resource file  resides.   Note that if you change parameter *read.iges.resource.name*, you should change  the name of the resource file and the name of the environment variable correspondingly.  The variable should contain a path to the resource file. 
 
 Default values:  
 * read.iges.resource.name -- IGES,  
@@ -286,7 +286,7 @@ A list of entities can  be formed by invoking the method *IGESControl_Reader::Gi
 Handle(TColStd_HSequenceOfTransient)  list = reader.GiveList(); 
 ~~~~~
 Several predefined  operators can be used to select a list of entities of a specific type. 
-To make a selection, you  use the method *IGESControl_Reader::GiveList* with the selection type in  quotation marks as an argument. You can also make cumulative selections. For  example, you would use the following syntax: 
+To make a selection, use the method *IGESControl_Reader::GiveList* with the selection type in  quotation marks as an argument. You can also make cumulative selections. For  example, you would use the following syntax: 
 1. Requesting the faces in the  file: 
 ~~~~~
 faces =  Reader.GiveList("iges-faces"); 
@@ -577,7 +577,7 @@ All  methods are in charge of transferring curves  from IGES curve entities <i>(
   * *IGESToBRep_TopoCurve::TransferPoint* -- vertex is constructed from a Point entity with tolerance *EpsGeom*UnitFactor*. 
   * *IGESToBRep_TopoCurve::Transfer2dPoint* -- vertex is constructed from a Point entity with tolerance *EpsCoeff*. 
   * *IGESToBRep_TopoCurve::TransferCompositeCurveGeneral* -- obtains shapes (edges or wires) from other methods and adds  them into the resulting wire. Two adjacent edges of the wire can be connected  with tolerance up to *MaxTol*. 
-  * *IGESToBRep_TopoCurve::TransferCurveOnFace* and  *IGESToBRep_TopoCurve::TransferBoundaryOnFace* build a wire from 3D and 2D representations of  a curve on surface. Edges and vertices of the wire cannot have tolerance larger than *MaxTol*. The value *EpsGeom*UnitFactor* is passed into *ShapeFix_Wire::SetPrecision* and *MaxTol* is passed into *ShapeFix_Wire::MaxTolerance*. To find out how these parameters affect the resulting tolerance changes, please,  refer to class *ShapeFix_Wire*. 
+  * *IGESToBRep_TopoCurve::TransferCurveOnFace* and  *IGESToBRep_TopoCurve::TransferBoundaryOnFace* build a wire from 3D and 2D representations of  a curve on surface. Edges and vertices of the wire cannot have tolerance larger than *MaxTol*. The value *EpsGeom*UnitFactor* is passed into *ShapeFix_Wire::SetPrecision* and *MaxTol* is passed into *ShapeFix_Wire::MaxTolerance*. To find out how these parameters affect the resulting tolerance changes, refer to class *ShapeFix_Wire*. 
   * *IGESToBRep_TopoCurve::TransferTopoBasicCurve* and  *IGESToBRep_TopoCurve::Transfer2dTopoBasicCurve* -- the boundary vertices of an edge (or a wire if a curve was  of C0 continuity) translated from a basis IGES curve (*BSplineCurve,  CopiousData, Line,* etc.) are built with tolerance *EpsGeom*UnitFactor*, the edge tolerance is *Precision::Confusion*. If a curve was divided into several edges, the common  vertices of such adjacent edges have tolerance *Precision::Confusion*.
   
   
@@ -710,7 +710,7 @@ if  (!Interface_Static::SetRVal(;write.precision.val;,0.01))
 ~~~~~
 Default value is 0.0001. 
 
-<h4>write.iges.resource.name</h4> and <h4>write.iges.sequence</h4> are the same as the corresponding read.iges.\* parameters, please, see above. Note that the  default sequence for writing   contains *DirectFaces* operator, which converts elementary surfaces based on left-hand axes (valid in CASCADE) to right-hand axes (which are valid only in IGES). 
+<h4>write.iges.resource.name</h4> and <h4>write.iges.sequence</h4> are the same as the corresponding read.iges.\* parameters. Note that the  default sequence for writing contains *DirectFaces* operator, which converts elementary surfaces based on left-hand axes (valid in CASCADE) to right-hand axes (which are valid only in IGES). 
 
 Default values : 
 ~~~~~

dox/user_guides/inspector/images/3DView_elements.svg

@@ -0,0 +1,224 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="165.36458mm"
+   height="99.483337mm"
+   viewBox="0 0 165.36458 99.483337"
+   version="1.1"
+   id="svg8"
+   sodipodi:docname="3DView_elements.svg"
+   inkscape:version="0.92.2 (5c3e80d, 2017-08-06)">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="0.98994949"
+     inkscape:cx="237.05748"
+     inkscape:cy="217.01184"
+     inkscape:document-units="mm"
+     inkscape:current-layer="layer1"
+     showgrid="false"
+     inkscape:window-width="1410"
+     inkscape:window-height="786"
+     inkscape:window-x="265"
+     inkscape:window-y="101"
+     inkscape:window-maximized="0"
+     fit-margin-top="0"
+     fit-margin-left="0"
+     fit-margin-right="0"
+     fit-margin-bottom="0"
+     showborder="true"
+     inkscape:showpageshadow="false" />
+  <metadata
+     id="metadata5">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     transform="translate(-208.35938,-140.66904)">
+    <rect
+       style="opacity:1;fill:#000000;fill-opacity:0;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4147-9"
+       width="164.83542"
+       height="98.95417"
+       x="208.62396"
+       y="140.93362"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <rect
+       style="opacity:1;fill:#bfbfbf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4157-5"
+       width="155.95102"
+       height="20.214758"
+       x="212.62312"
+       y="145.17099"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <rect
+       style="opacity:1;fill:#bfbfbf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4159-1"
+       width="155.83388"
+       height="64.776878"
+       x="212.62471"
+       y="170.05089"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <rect
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620295;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4195-1-1"
+       width="30.417513"
+       height="11.316654"
+       x="286.53876"
+       y="149.43106"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <rect
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620295;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4195-1-5-9"
+       width="30.417513"
+       height="11.316654"
+       x="321.21384"
+       y="149.43106"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="295.72775"
+       y="156.1628"
+       id="text5675-5"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90"><tspan
+         sodipodi:role="line"
+         id="tspan5677-3"
+         x="295.72775"
+         y="156.1628"
+         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Single</tspan></text>
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="331.03946"
+       y="156.53418"
+       id="text5679-5"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90"><tspan
+         sodipodi:role="line"
+         id="tspan5681-0"
+         x="331.03946"
+         y="156.53418"
+         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Clean</tspan></text>
+    <rect
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.45057005;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4195-8-33"
+       width="14.354354"
+       height="56.42762"
+       x="216.9996"
+       y="174.34537"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <rect
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.83517319;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4195-7-0"
+       width="67.939919"
+       height="26.352776"
+       x="265.93634"
+       y="189.26295"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:3.3866663px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="295.6308"
+       y="201.46571"
+       id="text5683-5-2"
+       transform="scale(0.98830373,1.0118347)"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90"><tspan
+         sodipodi:role="line"
+         id="tspan5685-3-7"
+         x="295.6308"
+         y="201.46571"
+         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">3D view</tspan></text>
+    <rect
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620298;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4195-1-1-3"
+       width="30.417513"
+       height="11.316654"
+       x="217.1886"
+       y="149.43106"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="227.84984"
+       y="156.48491"
+       id="text5675-5-2"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90"><tspan
+         sodipodi:role="line"
+         id="tspan5677-3-2"
+         x="227.84984"
+         y="156.48491"
+         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">View</tspan></text>
+    <rect
+       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620298;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
+       id="rect4195-1-1-9"
+       width="30.417513"
+       height="11.316654"
+       x="251.86369"
+       y="149.43106"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90" />
+    <text
+       xml:space="preserve"
+       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       x="262.35156"
+       y="156.53418"
+       id="text5675-5-9"
+       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
+       inkscape:export-xdpi="90"
+       inkscape:export-ydpi="90"><tspan
+         sodipodi:role="line"
+         id="tspan5677-3-0"
+         x="262.35156"
+         y="156.53418"
+         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Multi</tspan></text>
+  </g>
+</svg>