OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-04-08 18:40:55 +03:00
Code Packages Releases Activity
occt/tests/bugs/modalg_6
History
nbv 98974dccef 0029972: Intersection curve has a weird gap in the middle of it 
1. The condition of WLine breaking (in IntWalk_IWalking algorithm) has become more independent of the input tolerance.

2. Currently the algorithm of IntPatch_Points of WLine processing depends on the algorithm of obtaining the WLine.

3. The methods IntSurf_LineOn2S::Add(...) and IntSurf_LineOn2S::SetUV(...) have become not inline (see the message ~0077431 in the issue #29866).
2018-09-03 17:05:14 +03:00
..
begin
0021821: Section of face by plane is not built due to small edges
2015-04-16 14:10:25 +03:00
bug6768
0028677: Avoid change of wire orientation in BRepLib_MakeFace if the wire is open
2017-05-05 11:27:53 +03:00
bug7093
0007093: BRepLib::SameParameter() changes tolerance of shape, not involved into operation
2015-04-06 17:24:47 +03:00
bug8040
0008040: Offset direction is wrong for a closed circle
2016-08-18 14:46:24 +03:00
bug10234
0010234: BRepOffsetAPI_MakePipeShell fails on spine built from two segments and profile built from arc
2016-09-22 12:19:45 +03:00
bug14531
0014531: Boolean Operation Algorithm fails
2016-09-23 09:57:46 +03:00
bug21107
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug21246
0029701: BRepTools::Update(Face) unexpectedly updates UV points of pcurve
2018-05-23 06:39:49 +03:00
bug21351
0021351: Fail to compute derivatives of offset surface on trimmed surfaces on offsets on CN surfaces
2015-04-23 16:29:58 +03:00
bug21427
0021427: Invalid result of cutting attached shapes
2016-08-11 11:43:24 +03:00
bug21507
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug21624
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug21670
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug21727
0021727: BRepBuilderAPI_Copy (and possibly other similar tools) create new shape in Frozen state
2015-04-30 14:11:07 +03:00
bug21750
0021750: Intersection of two cylindrical surfaces fails
2017-03-02 12:32:01 +03:00
bug21821
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug21875
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug22037
0022037: Exception (Construction Error) during splitting face with hole by another face
2016-09-15 12:13:18 +03:00
bug22454
0022454: Export /Import of valid model leads to lost of tolerances
2016-09-15 11:16:18 +03:00
bug22609
0022609: Cut operation between two solids produces not valid shape
2016-09-15 11:18:16 +03:00
bug22634
0022634: Cut operation on closed solids returns opened one
2016-08-18 14:46:38 +03:00
bug22644_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug22644_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug22644_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug22793
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug22794
0028146: Data files with the same content in test cases
2016-11-23 13:09:48 +03:00
bug23138
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug23177_1
0023177: Intersection of plane and torus misses a result and never produces analytical result
2017-06-01 13:55:20 +03:00
bug23177_2
0023177: Intersection of plane and torus misses a result and never produces analytical result
2017-06-01 13:55:20 +03:00
bug23178
0023178: Intersection of cylinders fails to produce results
2016-10-07 13:37:31 +03:00
bug23585
0023585: Boolean Fuse Operation Fails.
2016-08-25 11:14:13 +03:00
bug23666
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug24011
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug24094
0028491: Incomplete section curve
2017-03-03 16:11:27 +03:00
bug24097
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug24161
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug24357
0026241: Sewing algorithm computes tolerance of joint vertex too rough
2015-06-18 14:04:52 +03:00
bug24417
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug24803
0024803: improve the result of v/v interference for two vertices case
2015-04-09 16:28:55 +03:00
bug24890
0025957: nurbsconvert modifies original shape
2016-08-18 14:46:13 +03:00
bug24932
0024932: addsweep does not check if the supplied variable contains a shape
2016-11-03 14:15:47 +03:00
bug25055
0025055: Incorrect shape copying in BRepBuilderAPI_Copy
2016-09-08 11:09:27 +03:00
bug25102
0025102: A part of intersection cannot be found
2016-09-08 11:30:31 +03:00
bug25138
0025138: SIGSEGV when sweeping along helix
2016-09-15 12:11:58 +03:00
bug25152
0029972: Intersection curve has a weird gap in the middle of it
2018-09-03 17:05:14 +03:00
bug25214
0025214: HLR fails to project edges
2016-10-27 17:27:26 +03:00
bug25220
0025220: Using BRepFill_OffsetWire withs wires containing arc edges throws exception "Standard_NullValue"
2016-09-01 11:21:49 +03:00
bug25271
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25342
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25423_1
0025423: Incorrect result of splitting some shapes
2016-09-15 11:20:16 +03:00
bug25423_2
0025423: Incorrect result of splitting some shapes
2016-09-15 11:20:16 +03:00
bug25593
0029368: Incorrect intersection state of the intersection point of two 2d curves
2018-01-17 16:43:31 +03:00
bug25613_1
0027300: Boolean operation produces invalid shape in terms of "bopargcheck" command
2016-04-08 11:42:42 +03:00
bug25613_2
0025613: Wrong distance found by xdistef command for attached shapes
2015-07-03 13:39:37 +03:00
bug25792
0025792: BRepAlgoAPI_Section fails depending on order of arguments
2016-10-27 17:54:31 +03:00
bug25813_1
0025813: regression in Hidden Line Removal
2016-03-29 15:52:33 +03:00
bug25813_2
0025813: regression in Hidden Line Removal
2016-03-29 15:52:33 +03:00
bug25813_3
0025813: regression in Hidden Line Removal
2016-03-29 15:52:33 +03:00
bug25813_4
0025813: regression in Hidden Line Removal
2016-03-29 15:52:33 +03:00
bug25813_5
0025813: regression in Hidden Line Removal
2016-03-29 15:52:33 +03:00
bug25820_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25820_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25820_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25844
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25880
0026738: Make Boolean operations safely treating arguments when running with fuzzy option
2016-11-08 16:42:44 +03:00
bug25890
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug25908
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug25937_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25937_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25937_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug25957_1
0025957: nurbsconvert modifies original shape
2016-08-18 14:46:13 +03:00
bug25957_2
0025957: nurbsconvert modifies original shape
2016-08-18 14:46:13 +03:00
bug26008
0026008: Wrong intersection 2D-curves obtained for pair of faces.
2015-04-09 16:12:05 +03:00
bug26010
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26016
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26041
0026041: GeomLib_Tool::Parameter method fails
2015-04-16 11:30:11 +03:00
bug26063
0028599: Replacement of old Boolean operations with new ones in BRepProj_Projection algorithm
2018-02-01 18:46:36 +03:00
bug26064
0026064: distmini of two edges locks up
2015-04-30 13:19:23 +03:00
bug26075
0027162: Draw command "(2d)extrema" incorrectly represent underlying algorithm results
2016-02-20 10:10:03 +03:00
bug26080
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26098
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26099
0026099: Wrong result done by 2d intersection algorithm
2015-09-17 12:47:07 +03:00
bug26112
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26130
0028909: Algorithm of BO is stuck while fusing shell and edges
2017-10-06 10:28:17 +03:00
bug26132
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26150_1
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_2
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_3
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_4
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_5
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_6
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_7
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_8
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_9
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_10
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_11
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_12
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_13
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_14
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_15
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_16
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_17
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26150_18
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26151_1
0026151: Wrong result obtained by intersection algorithm.
2015-06-10 10:39:34 +03:00
bug26151_2
0026151: Wrong result obtained by intersection algorithm.
2015-06-10 10:39:34 +03:00
bug26152_1
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26152_2
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26173
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26180
0026180: Modeling Algorithms - Provide shape self-intersection detector
2015-05-28 12:19:25 +03:00
bug26185_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26185_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26185_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26185_4
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26185_5
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26185_6
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26185_7
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26188
0026188: Incorrect PCurve creation
2015-12-17 15:34:21 +03:00
bug26193
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26196
0026196: Wrong result obtained by projection algorithm.
2015-09-17 17:11:34 +03:00
bug26197
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26201
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26202
0026202: Wrong result of chamfer on cylindrical surface: wrong value of chord
2015-05-14 17:05:38 +03:00
bug26206
0026206: BRepClass_FaceClassifier returns TopAbs_OUT for internal point
2015-06-04 14:35:36 +03:00
bug26208
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26218
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26224
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26233
0028903: BRepOffset_MakeOffset produces invalid shape (thickshell) in Intersection mode
2018-03-29 17:13:04 +03:00
bug26241
0026241: Sewing algorithm computes tolerance of joint vertex too rough
2015-06-18 14:04:52 +03:00
bug26243_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26243_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26243_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26251
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26253
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26270
0026270: GeomFill_NSections constructor crash
2016-07-21 12:49:08 +03:00
bug26281_1
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-06-04 14:03:08 +03:00
bug26281_2
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-06-04 14:03:08 +03:00
bug26288
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26296_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26296_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26296_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26296_4
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26296_5
0028677: Avoid change of wire orientation in BRepLib_MakeFace if the wire is open
2017-05-05 11:27:53 +03:00
bug26305_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26305_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26305_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26308
0026308: Segmentation fault in BSplCLib::LocateParameter
2015-07-20 15:24:00 +03:00
bug26310_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26310_3
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug26310_4
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug26313
0026313: Method BRepBuilderAPI_GTransform::ModifiedShape(...) thows exception
2015-09-10 16:19:23 +03:00
bug26315
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26316
0026316: Infinite modification of the shapes in General Fuse operation
2015-06-25 12:51:30 +03:00
bug26330
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26332
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26333
0026333: Regression of BRepOffsetAPI_MakeOffset regarding to 6.7.0: it fails on a shape with BSpline boundaries
2016-02-11 13:05:05 +03:00
bug26334
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26352
0026352: Wrong intersection points found
2015-07-02 14:28:55 +03:00
bug26354
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26356
0026356: Wrong result done by projection algorithm
2015-07-09 14:14:55 +03:00
bug26379_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26379_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26387
0026387: BRepPrimAPI_MakePrism crash when extruding Paraboloid face.
2015-07-20 14:08:18 +03:00
bug26393
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug26396
0026396: Taper API result differs run-to-run for identical inputs
2015-10-08 10:35:08 +03:00
bug26406
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26418_1
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_2
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_3
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_4
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26420_1
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26420_2
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26420_3
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26426
0026426: Draft angle algorithm modifies input argument + the result of the operation have very large tolerance values
2015-10-29 13:36:17 +03:00
bug26427
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26431_1
0026431: Can't cut a sphere from a cylinder
2015-12-04 13:15:04 +03:00
bug26431_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26431_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26440_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26440_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26440_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26442_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26442_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26444
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26446
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26450
0026450: Boolean operation is running endless
2016-11-23 18:08:37 +03:00
bug26464
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26466
0026466: UnifySameDomain creates invalid result shape from valid input shape
2015-07-28 17:59:16 +03:00
bug26470_1
0026470: BRepFill_Evolved: exception and invalid result
2015-10-22 15:43:33 +03:00
bug26470_2
0026470: BRepFill_Evolved: exception and invalid result
2015-10-22 15:43:33 +03:00
bug26473_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26473_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26481
0028677: Avoid change of wire orientation in BRepLib_MakeFace if the wire is open
2017-05-05 11:27:53 +03:00
bug26484
0026484: BRepExtrema_DistShapeShape hangs
2015-07-29 16:04:54 +03:00
bug26493
0026493: BRepProj_Projection failed to project a wire on a shell
2018-05-24 15:36:21 +03:00
bug26496
0026496: Error in use the BRepCheck_Analyzer
2015-07-30 12:40:05 +03:00
bug26498
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26523
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26525_1
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26525_2
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26525_3
0026252: GeomAdaptor_Surface should use inner adaptor to calculate values of complex surfaces
2015-11-19 14:50:54 +03:00
bug26525_4
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26535
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26540
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26553
0026553: Out of range exception in BRepFill_Pipe::FindEdge
2015-08-20 16:43:39 +03:00
bug26554
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26556_1
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_2
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_3
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_4
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26565_1
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_2
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_3
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_4
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_5
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_6
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_7
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_8
0028574: Get rid of the TestTopOpe* packages
2017-03-30 12:46:01 +03:00
bug26567
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26575
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26576_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26576_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26576_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26576_4
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26580_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26580_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26582
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26587
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26588
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26607
0026607: Wrong value of area.
2015-10-01 13:49:24 +03:00
bug26609
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26616
Final updates before release
2015-12-25 10:29:11 +03:00
bug26619
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug26621
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26627
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26636
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26640
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26647
0026647: BRepTools::UVBounds() computes zero range by V
2015-09-10 16:31:40 +03:00
bug26673
0026673: BOPTools_AlgoTools::ComputeVV incorrectly checks two vertices for intersection
2016-11-03 14:15:49 +03:00
bug26675
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26681
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26684_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26684_2
0027190: IntPatch_ImpPrmIntersection algorithm does not split intersection curve by the seam-edge of the quadric
2016-03-18 07:11:00 +03:00
bug26687
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26699
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26701
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26717
0026717: Error in IntPatch_PrmPrmIntersection: change of local resolution leads to break of walking line
2015-10-08 10:24:07 +03:00
bug26718
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26736_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26736_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26738
0026738: Make Boolean operations safely treating arguments when running with fuzzy option
2016-11-08 16:42:44 +03:00
bug26744
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26745
0026745: Boolean Cut produces invalid result
2017-01-26 13:42:19 +03:00
bug26746
0026746: Method gp_Torus::Coefficients(...) returns incorrect value.
2015-10-15 12:48:28 +03:00
bug26747_1
0026747: Some constructors of gp_Parab2d class contain redundant parameters
2016-06-09 12:31:14 +03:00
bug26747_2
0026747: Some constructors of gp_Parab2d class contain redundant parameters
2016-06-09 12:31:14 +03:00
bug26747_3
0026747: Some constructors of gp_Parab2d class contain redundant parameters
2016-06-09 12:31:14 +03:00
bug26748
0026745: Boolean Cut produces invalid result
2017-01-26 13:42:19 +03:00
bug26750
0026750: Method IsNormal(...) for gp_Vec2d returns FALSE if the angle between two vectors is equal to -90 degree (-M_PI/2 radian)
2015-10-08 10:17:03 +03:00
bug26757_1
0026757: Wrong history of a fillet
2015-11-05 12:14:03 +03:00
bug26757_2
0026757: Wrong history of a fillet
2015-11-05 12:14:03 +03:00
bug26775
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26789_1
0029646: Boolean Operations algorithm produces a face with self-intersecting wire
2018-03-29 17:13:12 +03:00
bug26789_2
0029646: Boolean Operations algorithm produces a face with self-intersecting wire
2018-03-29 17:13:12 +03:00
bug26789_3
0028486: Fuse of several solids fails due to presence of common zones between faces
2017-03-16 10:47:51 +03:00
bug26796
0026796: The result of General Fuse operation is self-intersecting shape
2017-03-02 12:32:00 +03:00
bug26841_1
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug26841_2
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug26848
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26894
0026894: Intersection algorithm between two infinite cylinders is hanging
2016-10-07 13:37:33 +03:00
bug26896_1
0028802: The tolerance reached by approximator is used in creation of an edge, it is incorrect
2017-06-15 15:27:34 +03:00
bug26896_2
0029359: Approximation algorithm computes multidimensional distance in Euclidean space incorrectly
2017-12-11 11:19:22 +03:00
bug26896_3
0028802: The tolerance reached by approximator is used in creation of an edge, it is incorrect
2017-06-15 15:27:34 +03:00
bug26897
0027126: Create command checktrinfo to verify meshes
2016-02-05 11:14:44 +03:00
bug26910
0026910: General fuse does not find intersection between line and circle
2016-09-01 11:15:35 +03:00
bug26923
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26938_1
0029179: Result of Boolean common depends on an order of arguments
2017-12-14 17:44:27 +03:00
bug26938_2
0029179: Result of Boolean common depends on an order of arguments
2017-12-14 17:44:27 +03:00
bug26938_3
0029368: Incorrect intersection state of the intersection point of two 2d curves
2018-01-17 16:43:31 +03:00
bug26938_4
0029368: Incorrect intersection state of the intersection point of two 2d curves
2018-01-17 16:43:31 +03:00
bug26952_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26952_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26953_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26953_2
0027448: BOPTools_AlgoTools::IsMicroEdge does not correspond to shape validity criteria
2016-07-28 15:00:26 +03:00
bug26953_3
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26953_4
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26954_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26954_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26954_3
0028259: Method MakeBlocksCnx is duplicated in two different places in BOPAlgo
2017-06-01 10:20:25 +03:00
bug26954_4
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26954_5
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26955
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26971
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug26985
0026985: Wrong section between two faces: it has a gap
2016-02-20 13:04:34 +03:00
bug27002_1
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug27002_2
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug27010
0026833: Create command checkview containing all viewer types
2016-02-05 11:14:37 +03:00
bug27015
0027015: Sewing returns invalid shape if some faces are nearly plane cones
2016-06-03 10:47:08 +03:00
bug27032
0027032: [Regression to 6.9.1] Result of bcut has the same volume as the object
2016-01-13 15:49:03 +03:00
bug27033
0027033: Modeling -- ensure stable result of area calculation
2016-11-25 13:50:18 +03:00
bug27035
0027035: General fuse algorithm loses face
2016-02-20 13:04:32 +03:00
bug27045_1
0027045: firsthole & holend commands work incorrectly
2016-01-15 11:13:23 +03:00
bug27045_2
0027045: firsthole & holend commands work incorrectly
2016-01-15 11:13:23 +03:00
bug27051
0027051: BRepBuilderAPI_GTransform produces invalid result
2016-03-31 11:33:56 +03:00
bug27065_1
0027065: BRepOffsetAPI_MakePipe misses definition of virtual method Generated()
2016-02-12 00:04:04 +03:00
bug27065_2
0027065: BRepOffsetAPI_MakePipe misses definition of virtual method Generated()
2016-02-12 00:04:04 +03:00
bug27079_1
0027079: Bad approximation of intersection curves with variable curvature
2017-06-16 14:24:53 +03:00
bug27079_2
0027079: Bad approximation of intersection curves with variable curvature
2017-06-16 14:24:53 +03:00
bug27079_3
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug27079_4
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug27082_1
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
2016-04-08 11:42:37 +03:00
bug27082_1i
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
2016-04-08 11:42:37 +03:00
bug27082_2
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
2016-04-08 11:42:37 +03:00
bug27082_2i
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
2016-04-08 11:42:37 +03:00
bug27082_3
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
2016-04-08 11:42:37 +03:00
bug27082_3i
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
2016-04-08 11:42:37 +03:00
bug27110
0027110: Regression: Draw command "parameters" can not compute parameter on the line.
2016-02-04 13:29:29 +03:00
bug27117
0027117: BRepClass3d_SolidClassifier doesn't take into account vertex/edge/face tolerances
2016-04-08 11:50:38 +03:00
bug27124
0027124: Invalid curve on surface in the result of General Fuse operation
2016-04-14 12:32:40 +03:00
bug27128
0027179: The algorithm of sharing edges in Boolean operation should be improved
2016-03-29 15:52:13 +03:00
bug27129
0027124: Invalid curve on surface in the result of General Fuse operation
2016-04-14 12:32:40 +03:00
bug27134
0027134: Offset algorithm produces an invalid shape from a cone
2016-02-12 00:04:28 +03:00
bug27151
0027151: Exception is raised during performing command "splitshape" in the Test Harness
2016-04-08 11:42:11 +03:00
bug27159
0027159: Section between two faces is lost
2016-02-20 18:43:47 +03:00
bug27167
0027167: Boolean operations produce an invalid shape
2016-03-30 12:40:45 +03:00
bug27175
0027175: Intersection algorithm with increased tolerance works incorrect with some shapes
2016-03-28 17:31:15 +03:00
bug27179
0027179: The algorithm of sharing edges in Boolean operation should be improved
2016-03-29 15:52:13 +03:00
bug27182
0027182: Wrong result of General Fuse operation for two spheres
2017-02-27 15:09:44 +03:00
bug27190
0027167: Boolean operations produce an invalid shape
2016-03-30 12:40:45 +03:00
bug27199
0027199: Unifysamedomain regression issue in OCCT 7
2016-07-21 11:16:35 +03:00
bug27221
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug27222
0027222: Empty result of making volume operation
2016-09-08 11:28:14 +03:00
bug27240_1
0027244: Test case with workaround for issue 0027240
2016-10-27 17:53:28 +03:00
bug27252_1
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug27252_2
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug27252_3
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug27252_4
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug27253
0027253: Boolean cut produces invalid result shape
2016-03-18 07:15:52 +03:00
bug27260
0027260: Incorrect result of General Fuse operation
2016-10-27 17:42:37 +03:00
bug27262
0027263: Regression vs 6.9.1: Exception is raised during intersection of two faces
2016-03-18 07:14:33 +03:00
bug27263
Adjusting test case after changes of issue 27270
2016-03-21 14:56:33 +03:00
bug27264_1
0027264: Weird difference between two BRepTools::Write() overloads
2016-07-21 11:05:39 +03:00
bug27264_2
0027264: Weird difference between two BRepTools::Write() overloads
2016-07-21 11:05:39 +03:00
bug27264_3
0027264: Weird difference between two BRepTools::Write() overloads
2016-07-21 11:05:39 +03:00
bug27264_4
0027264: Weird difference between two BRepTools::Write() overloads
2016-07-21 11:05:39 +03:00
bug27264_5
0027264: Weird difference between two BRepTools::Write() overloads
2016-07-21 11:05:39 +03:00
bug27264_6
0027264: Weird difference between two BRepTools::Write() overloads
2016-07-21 11:05:39 +03:00
bug27267
0027267: [Regression to 6.9.1] geom/boolean_operations_06/G3: Cut produces invalid shape
2016-03-18 07:09:27 +03:00
bug27269
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug27270
0027270: Boolean operations: incorrect assembling of sub-shapes in container shapes (wires, shells, compsolids)
2016-03-18 16:24:16 +03:00
bug27271
0027271: Unifysamedomain invalid result
2016-04-08 11:50:58 +03:00
bug27272
0027272: FixMissingSeam function creates G1 seam curves
2016-04-15 10:59:52 +03:00
bug27273
0027273: The computation of linear properties on shared shapes is not correct
2016-03-28 17:31:20 +03:00
bug27274
0027274: Regression vs 6.9.1: Wrong result of General Fuse operation on two cylinders
2016-03-24 12:49:28 +03:00
bug27280
0027280: HLR algorithms taking seam edges into account
2016-04-14 12:45:56 +03:00
bug27282_1
0027300: Boolean operation produces invalid shape in terms of "bopargcheck" command
2016-04-08 11:42:42 +03:00
bug27282_2
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug27283
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27302
0029359: Approximation algorithm computes multidimensional distance in Euclidean space incorrectly
2017-12-11 11:19:22 +03:00
bug27309
0027309: Result of UnifySameDomain has InvalidMultiConnexity error
2016-04-08 11:42:37 +03:00
bug27310_1
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug27310_2
0028802: The tolerance reached by approximator is used in creation of an edge, it is incorrect
2017-06-15 15:27:34 +03:00
bug27315
0027315: UnifySameDomain leaves unmerged edges
2016-04-08 11:42:53 +03:00
bug27322
0029176: Exception while projection 2D-point on 2D-line
2017-10-06 10:28:14 +03:00
bug27325
0027269: Intersection algorithm produces null-length curve
2016-04-28 14:21:40 +03:00
bug27341
0027468: Incorrect processing of some cases by HLR algorithm
2016-05-12 10:33:35 +03:00
bug27341_101
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_102
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_103
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_104
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_105
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_106
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_107
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_201
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_202
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_203
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_204
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_205
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_206
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_207
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_301
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_302
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_303
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_304
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_305
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_306
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_307
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_308
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_309
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_310
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_311
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_312
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_313
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_314
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_315
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_316
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_317
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_318
0029359: Approximation algorithm computes multidimensional distance in Euclidean space incorrectly
2017-12-11 11:19:22 +03:00
bug27341_319
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_320
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_321
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_322
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_323
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_324
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_325
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_326
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_327
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_328
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27341_329
0029380: Delete "checknbshapes" from bugs/modalg_6/bug27341* test cases
2017-12-25 18:30:29 +03:00
bug27357
0027357: Geom2dGcc_Circ2d2TanOn: check status of sub-algorithms to avoid exceptions
2016-06-30 13:49:20 +03:00
bug27383_1
0028259: Method MakeBlocksCnx is duplicated in two different places in BOPAlgo
2017-06-01 10:20:25 +03:00
bug27383_2
0027383: Modeling - improve handling of regularity on edges
2017-01-26 12:45:22 +03:00
bug27383_3
0027383: Modeling - improve handling of regularity on edges
2017-01-26 12:45:22 +03:00
bug27383_4
0027383: Modeling - improve handling of regularity on edges
2017-01-26 12:45:22 +03:00
bug27383_5
0027383: Modeling - improve handling of regularity on edges
2017-01-26 12:45:22 +03:00
bug27383_6
0027383: Modeling - improve handling of regularity on edges
2017-01-26 12:45:22 +03:00
bug27383_7
0027383: Modeling - improve handling of regularity on edges
2017-01-26 12:45:22 +03:00
bug27386_1
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27386_2
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27386_3
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27386_4
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27386_5
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27386_6
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27386_7
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27386_8
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27391
0027391: BRepLib::EnsureNormalConsistency() raises exception in case of asynchronious PolygonOnTriangulation problem
2016-06-16 12:21:02 +03:00
bug27431
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug27434
0027434: Wrong result of classification of the point in "infinity"
2016-12-08 16:34:18 +03:00
bug27441
0027428: DRAW command "bsection" did not built section line between two faces (one face based on the plane)
2016-11-09 13:12:51 +03:00
bug27448_1
0027448: BOPTools_AlgoTools::IsMicroEdge does not correspond to shape validity criteria
2016-07-28 15:00:26 +03:00
bug27448_2
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug27481
0027481: [Regression to OCCT 6.6.0] Modeling Algorithms - incorrect CUT on two solids
2016-06-02 14:23:40 +03:00
bug27519_1
0027448: BOPTools_AlgoTools::IsMicroEdge does not correspond to shape validity criteria
2016-07-28 15:00:26 +03:00
bug27519_2
0027448: BOPTools_AlgoTools::IsMicroEdge does not correspond to shape validity criteria
2016-07-28 15:00:26 +03:00
bug27521_1
0027521: Standard_ConstructionError when trying to use unifySameDom into a shape
2016-05-26 12:19:26 +03:00
bug27521_2
0027521: Standard_ConstructionError when trying to use unifySameDom into a shape
2016-05-26 12:19:26 +03:00
bug27524
Update of tests database
2017-08-18 12:13:40 +03:00
bug27529
0027529: Invalid result of CUT operation
2016-06-23 18:15:08 +03:00
bug27537
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug27540_1
0026917: 3D Offset algorithm produces incorrect result
2016-11-08 18:05:05 +03:00
bug27540_2
0026917: 3D Offset algorithm produces incorrect result
2016-11-08 18:05:05 +03:00
bug27540_3
0026917: 3D Offset algorithm produces incorrect result
2016-11-08 18:05:05 +03:00
bug27552_1
0027552: Wire creation fails depending on the order of edges
2016-07-28 15:00:28 +03:00
bug27552_2
0027552: Wire creation fails depending on the order of edges
2016-07-28 15:00:28 +03:00
bug27552_3
0027552: Wire creation fails depending on the order of edges
2016-07-28 15:00:28 +03:00
bug27568
0027568: Exception is thrown when a degenerated edge is added to a wire
2016-06-23 18:14:27 +03:00
bug27615
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug27664_1
0029359: Approximation algorithm computes multidimensional distance in Euclidean space incorrectly
2017-12-11 11:19:22 +03:00
bug27664_2
0027664: Incomplete intersection curve from the attached shapes
2016-07-14 13:05:15 +03:00
bug27665
0027665: BrepExrtrema_DistShapeShape bad performance on OCCT 6.7.0
2016-08-04 12:08:05 +03:00
bug27674
0027674: BRepOffsetAPI_ThruSections make invalid shape if sections are connected at ends
2016-12-08 16:22:33 +03:00
bug27677
0027677: Incorrect CUT of a solid by semi-infinite solid
2016-07-21 11:14:57 +03:00
bug27679
0027679: Wrong offset: overlapping edges
2016-07-21 11:20:34 +03:00
bug27704
0027704: Numeric inaccuracy due to huge extension of the offset faces
2016-07-28 15:00:31 +03:00
bug27719_101
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_102
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_103
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_104
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_105
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_201
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_202
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_203
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_204
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27719_205
0027719: HLRBrep_Algo incorrect output
2016-08-09 14:14:04 +03:00
bug27720_1
0029972: Intersection curve has a weird gap in the middle of it
2018-09-03 17:05:14 +03:00
bug27720_2
0029972: Intersection curve has a weird gap in the middle of it
2018-09-03 17:05:14 +03:00
bug27720_3
0029972: Intersection curve has a weird gap in the middle of it
2018-09-03 17:05:14 +03:00
bug27720_4
0029972: Intersection curve has a weird gap in the middle of it
2018-09-03 17:05:14 +03:00
bug27720_5
0028081: Fix regression in HLR introduced by the fix for 28053
2016-11-17 14:48:57 +03:00
bug27746_1
0027746: Incomplete result of SECTION operation
2016-08-04 12:11:02 +03:00
bug27746_2
0027746: Incomplete result of SECTION operation
2016-08-04 12:11:02 +03:00
bug27746_3
0027746: Incomplete result of SECTION operation
2016-08-04 12:11:02 +03:00
bug27759
0027759: Invalid result of a Boolean fuse operation
2016-09-08 11:13:56 +03:00
bug27761
0027766: Incorrect section curves between attached cylinders
2016-08-18 14:46:35 +03:00
bug27762_1
0027762: Incorrect result of General Fuse operation
2016-08-18 14:46:09 +03:00
bug27762_2
Test for 0028196: Algorithm 'Extrema_GenLocateExtPS' failed to find the extremum in a case
2016-12-16 11:58:12 +03:00
bug27766
0023178: Intersection of cylinders fails to produce results
2016-10-07 13:37:31 +03:00
bug27773
0027773: Empty result of section operation between line and offset of a circle
2016-08-18 14:46:20 +03:00
bug27775
0027775: Different behavior of GeomFill_BSplineCurves algorithm in DEBUG and RELEASE mode
2016-08-18 14:46:27 +03:00
bug27780
0027780: Face-face intersection produces 2D curve that has reversed derivative at its end
2016-08-25 11:26:05 +03:00
bug27782
0027782: Hidden Line Removal algorithm fails to handle filleted edges
2016-10-27 17:24:41 +03:00
bug27802
0027802: [Regression to 7.0] Solid classifier raises exception ConstructionError
2016-11-08 15:15:24 +03:00
bug27822
0029604: Uniform mechanism providing History of shape's modifications for OCCT algorithms in DRAW
2018-04-12 13:30:56 +03:00
bug27830
0027830: Infinite HLR looping
2016-09-15 12:19:52 +03:00
bug27842
0027713: Test bugs fclasses bug6143 is not OK for Linux after restoring FPS (26329)
2016-09-30 11:17:19 +03:00
bug27851
0027851: Wrong result of classification of the point relative to the solid
2016-09-15 11:38:53 +03:00
bug27856_1
0027856: Regression vs 6.7.1: General Fuse operation fails to fuse the solids
2016-10-27 17:26:00 +03:00
bug27856_2
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug27862
0027862: Exception in BRepOffsetAPI_MakePipeShell
2016-09-15 12:04:32 +03:00
bug27873
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug27875
0027875: GeomFill_NSections constructor crash on sequence of curve containing only one curve
2016-09-22 12:27:14 +03:00
bug27878_1
0027878: Development of the Gluing operations based on the new Boolean component
2016-12-08 16:50:17 +03:00
bug27878_2
0027878: Development of the Gluing operations based on the new Boolean component
2016-12-08 16:50:17 +03:00
bug27878_3
0027878: Development of the Gluing operations based on the new Boolean component
2016-12-08 16:50:17 +03:00
bug27878_4
0027878: Development of the Gluing operations based on the new Boolean component
2016-12-08 16:50:17 +03:00
bug27878_5
0027878: Development of the Gluing operations based on the new Boolean component
2016-12-08 16:50:17 +03:00
bug27878_6
0027878: Development of the Gluing operations based on the new Boolean component
2016-12-08 16:50:17 +03:00
bug27888
0027888: Fuse of valid untouched solids leads to result with faulties
2016-09-30 11:17:20 +03:00
bug27896
0029359: Approximation algorithm computes multidimensional distance in Euclidean space incorrectly
2017-12-11 11:19:22 +03:00
bug27907
0027946: Out of range item access in offset algorithm
2016-10-13 13:46:39 +03:00
bug27907_1
0027946: Out of range item access in offset algorithm
2016-10-13 13:46:39 +03:00
bug27929
0027929: Methods D0 and D1 for trimmed offset surface return different values if the surface has osculating surface
2016-10-06 12:27:40 +03:00
bug27937_1
0027930: XMT file conversion loops infinitely
2016-10-13 13:49:02 +03:00
bug27937_2
0027930: XMT file conversion loops infinitely
2016-10-13 13:49:02 +03:00
bug27981
0027981: BRepExtrema_DistShapeShape returns not null distance on interfered shapes
2017-05-05 11:27:38 +03:00
bug27984
0027984: Volume maker algorithm is unable to build all possible solids from the given faces
2016-10-27 17:06:03 +03:00
bug27987
0027987: CellsBuilder algorithm does not find shared common parts of the arguments
2016-10-27 17:03:24 +03:00
bug27992
0027992: Modeling Algorithms - Extrema_ExtPS crashes on face without geometric surface
2016-11-17 18:49:36 +03:00
bug27998_1
0027998: Self-intersection is not detected
2017-03-02 12:31:55 +03:00
bug27998_2
0027998: Self-intersection is not detected
2017-03-02 12:31:55 +03:00
bug27998_3
0027998: Self-intersection is not detected
2017-03-02 12:31:55 +03:00
bug28002_1
0028002: Invalid result of Boolean Fuse operation
2016-10-27 17:43:43 +03:00
bug28002_2
0028002: Invalid result of Boolean Fuse operation
2016-10-27 17:43:43 +03:00
bug28003
0028326: Checking invariant shapes in revolve is incomplete
2017-02-09 16:16:11 +03:00
bug28009_1
0028009: [Regression vs OCCT7.0.0] Cut produces not valid shape
2016-11-03 14:15:43 +03:00
bug28009_2
0029359: Approximation algorithm computes multidimensional distance in Euclidean space incorrectly
2017-12-11 11:19:22 +03:00
bug28012
0028012: Exception while intersecting two surfaces
2016-11-03 14:15:51 +03:00
bug28017
0028017: Unexpected result of General Fuse operation
2016-12-16 11:59:40 +03:00
bug28028
0028028: Solid becomes invalid after scaling
2016-11-08 15:15:18 +03:00
bug28054_1
0028054: Regression: Class BRepProj_Projection gives invalid result after projection edge based on the line on the conical surface
2016-11-08 19:29:55 +03:00
bug28054_2
0028054: Regression: Class BRepProj_Projection gives invalid result after projection edge based on the line on the conical surface
2016-11-08 19:29:55 +03:00
bug28094
0028094: Shape obtained after DRAW command "splitshape" has unnecessary high tolerance.
2016-11-17 15:36:26 +03:00
bug28165_1
0028165: Improve performance of Boolean Operations
2016-12-08 16:53:22 +03:00
bug28165_2
0028165: Improve performance of Boolean Operations
2016-12-08 16:53:22 +03:00
bug28165_3
0028165: Improve performance of Boolean Operations
2016-12-08 16:53:22 +03:00
bug28165_4
0028165: Improve performance of Boolean Operations
2016-12-08 16:53:22 +03:00
bug28187
0028187: Add possibility to avoid creation of Internal parts in the result of Volume maker algorithm
2016-12-08 16:59:25 +03:00
bug28189_1
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_2
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_3
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_4
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_5
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_6
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_7
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_8
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28189_9
0028189: Result of Boolean operation is non-manifold wire
2016-12-29 18:32:44 +03:00
bug28207
0028747: Incorrect result of the section operation after edge refinement
2018-06-14 14:03:06 +03:00
bug28210
0027252: Implicit-implicit intersection (Cylinder-Plane) loses intersection curve
2017-01-26 13:34:16 +03:00
bug28221
0028221: General Fuse operation error
2016-12-22 12:44:05 +03:00
bug28222_1
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug28222_2
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug28222_3
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug28223
0028223: Projection of closed curve onto cylinder is wrong
2016-12-29 14:27:22 +03:00
bug28261
0028261: Chamfer fails on edge connected to cone's seam
2017-01-26 13:19:44 +03:00
bug28266
0028261: Chamfer fails on edge connected to cone's seam
2017-01-26 13:19:44 +03:00
bug28283
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug28284_1
0028284: Avoid classification of sub-shapes of arguments of BOPs relatively solids during Intersection phase
2017-01-26 13:39:02 +03:00
bug28284_2
0028284: Avoid classification of sub-shapes of arguments of BOPs relatively solids during Intersection phase
2017-01-26 13:39:02 +03:00
bug28284_3
0028284: Avoid classification of sub-shapes of arguments of BOPs relatively solids during Intersection phase
2017-01-26 13:39:02 +03:00
bug28326
0028326: Checking invariant shapes in revolve is incomplete
2017-02-09 16:16:11 +03:00
bug28343_1
0028747: Incorrect result of the section operation after edge refinement
2018-06-14 14:03:06 +03:00
bug28343_2
0028747: Incorrect result of the section operation after edge refinement
2018-06-14 14:03:06 +03:00
bug28346
0028346: Function ProjectOnSegments of ShapeAnalysis_Curve returns only single solution leading to projection result far from optimal
2017-06-01 13:55:22 +03:00
bug28373
0028373: Incomplete section between cylinder and plane
2017-01-26 12:53:35 +03:00
bug28394_1
0028394: Not precise extrema solution of line and circle lying in the same plane
2017-02-02 16:09:03 +03:00
bug28394_2
0028394: Not precise extrema solution of line and circle lying in the same plane
2017-02-02 16:09:03 +03:00
bug28468_1
0028468: Sweep with different sections raises Standard_NoSuchObject: BRep_Tool:: no parameter on edge
2017-03-16 10:51:54 +03:00
bug28468_2
0028468: Sweep with different sections raises Standard_NoSuchObject: BRep_Tool:: no parameter on edge
2017-03-16 10:51:54 +03:00
bug28474_1
0028474: Boolean operations - General Fuse operator breaks validity of resulting shape
2017-04-20 12:35:45 +03:00
bug28474_2
0028474: Boolean operations - General Fuse operator breaks validity of resulting shape
2017-04-20 12:35:45 +03:00
bug28486_1
0028486: Fuse of several solids fails due to presence of common zones between faces
2017-03-16 10:47:51 +03:00
bug28486_2
0028486: Fuse of several solids fails due to presence of common zones between faces
2017-03-16 10:47:51 +03:00
bug28486_3
0028486: Fuse of several solids fails due to presence of common zones between faces
2017-03-16 10:47:51 +03:00
bug28486_4
0028486: Fuse of several solids fails due to presence of common zones between faces
2017-03-16 10:47:51 +03:00
bug28490_1
0028490: Point located outside the solid is classified as inside
2017-06-22 11:31:00 +03:00
bug28490_2
0028490: Point located outside the solid is classified as inside
2017-06-22 11:31:00 +03:00
bug28491
0028491: Incomplete section curve
2017-03-03 16:11:27 +03:00
bug28492_1
0028492: Boolean common does not produce expected result
2017-03-16 13:31:01 +03:00
bug28492_2
0028492: Boolean common does not produce expected result
2017-03-16 13:31:01 +03:00
bug28492_3
0028492: Boolean common does not produce expected result
2017-03-16 13:31:01 +03:00
bug28496
0028496: BOP Cut failed on two attached faces with error "ErrorStatus : 191"
2017-03-16 10:44:27 +03:00
bug28501_1
0028501: Incomplete result of offset operation in mode Complete with Join type intersection
2017-03-16 10:54:35 +03:00
bug28501_2
0028501: Incomplete result of offset operation in mode Complete with Join type intersection
2017-03-16 10:54:35 +03:00
bug28501_3
0028501: Incomplete result of offset operation in mode Complete with Join type intersection
2017-03-16 10:54:35 +03:00
bug28501_4
0028501: Incomplete result of offset operation in mode Complete with Join type intersection
2017-03-16 10:54:35 +03:00
bug28501_5
0028501: Incomplete result of offset operation in mode Complete with Join type intersection
2017-03-16 10:54:35 +03:00
bug28501_6
0028501: Incomplete result of offset operation in mode Complete with Join type intersection
2017-03-16 10:54:35 +03:00
bug28501_7
0028501: Incomplete result of offset operation in mode Complete with Join type intersection
2017-03-16 10:54:35 +03:00
bug28535
0028535: BOP Fuse reports "ErrorStatus : 11" on two attached faces
2017-03-16 10:53:09 +03:00
bug28585
0028585: Wrong value of area computation
2017-03-30 12:49:05 +03:00
bug28591
0028591: BOP Cut creates wrong result
2017-04-12 17:53:03 +03:00
bug28594
0028594: Geom2dAPI_Interpolate generated curve is not the same as proe
2017-04-12 17:52:43 +03:00
bug28601
0028601: ShapeFix_Shape increases tolerance of sub-shapes of a valid shape
2017-04-28 12:44:51 +03:00
bug28626_1
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug28626_2
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug28626_3
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug28637
0028637: [regression] Extrema curve - curve can not find correct solution between edge based on the line and BSpline edge
2017-05-25 11:35:53 +03:00
bug28661_1
0028661: BRepOffsetAPI_MakePipeShell throws an exception Standard_NoSuchObject: NCollection_DataMap::Find
2017-04-28 12:44:54 +03:00
bug28661_2
0028661: BRepOffsetAPI_MakePipeShell throws an exception Standard_NoSuchObject: NCollection_DataMap::Find
2017-04-28 12:44:54 +03:00
bug28675_1
0028675: Invalid result of Boolean Cut operation when running with fuzzy value
2017-05-05 11:27:51 +03:00
bug28675_2
0028675: Invalid result of Boolean Cut operation when running with fuzzy value
2017-05-05 11:27:51 +03:00
bug28683
0028683: Wrong result of CUT operation
2017-05-05 12:11:23 +03:00
bug28690
0028775: Code duplication removal across the BOPAlgo_PaveFiller algorithm
2017-06-09 13:01:32 +03:00
bug28690_1
0028775: Code duplication removal across the BOPAlgo_PaveFiller algorithm
2017-06-09 13:01:32 +03:00
bug28690_2
0028775: Code duplication removal across the BOPAlgo_PaveFiller algorithm
2017-06-09 13:01:32 +03:00
bug28690_3
0028775: Code duplication removal across the BOPAlgo_PaveFiller algorithm
2017-06-09 13:01:32 +03:00
bug28692
0028692: Projection failed (projponf)
2017-05-25 11:37:04 +03:00
bug28706
0028222: Intersection of two cylinders fails
2017-05-26 14:48:59 +03:00
bug28718
0028802: The tolerance reached by approximator is used in creation of an edge, it is incorrect
2017-06-15 15:27:34 +03:00
bug28724
0028724: Extrema between circle and plane cannot be found
2017-05-18 16:56:42 +03:00
bug28745_1
0028745: Wrong results of Boolean operations on hemisphere solids
2017-05-18 16:49:10 +03:00
bug28745_2
0028745: Wrong results of Boolean operations on hemisphere solids
2017-05-18 16:49:10 +03:00
bug28745_3
0028745: Wrong results of Boolean operations on hemisphere solids
2017-05-18 16:49:10 +03:00
bug28745_4
0028745: Wrong results of Boolean operations on hemisphere solids
2017-05-18 16:49:10 +03:00
bug28745_5
0028745: Wrong results of Boolean operations on hemisphere solids
2017-05-18 16:49:10 +03:00
bug28745_6
0028745: Wrong results of Boolean operations on hemisphere solids
2017-05-18 16:49:10 +03:00
bug28745_7
0028745: Wrong results of Boolean operations on hemisphere solids
2017-05-18 16:49:10 +03:00
bug28771
0028771: BRepOffset_MakeOffset incorrect result
2017-06-01 10:10:46 +03:00
bug28773
0028773: BRepAlgoAPI_Cut invalid result
2017-06-01 13:55:24 +03:00
bug28775
0028775: Code duplication removal across the BOPAlgo_PaveFiller algorithm
2017-06-09 13:01:32 +03:00
bug28776
0028776: Extend the field BOPAlgo_Builder::myOrigins so that the shape could have multiple origins
2017-05-26 14:48:40 +03:00
bug28782
0028782: Shape sewing behavior not consistent for the same CAD file
2017-06-01 13:55:15 +03:00
bug28795
0028795: Boolean operations corrupt the p-curve of the source planar face if "non-destructive" option is switched off
2017-06-02 11:47:42 +03:00