OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-04-05 18:16:23 +03:00
Code Packages Releases Activity
occt/tests/bugs/modalg_7
History
emv d476fc37f8 0030559: BOP Fuse: result is inconsistent 
Implement alternative approach for making the edge seam (closed) on the face. This approach is useful for non-periodic surfaces (e.g. tore-like surface of revolution is periodic in U direction only).
Avoid internal faces in the affected solids of the result of BOP Fuse.
2020-09-27 12:00:04 +03:00
..
begin
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug83
Update of tests database
2017-10-06 10:28:34 +03:00
bug5081_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug5081_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug5582
Update of tests database
2017-10-06 10:28:34 +03:00
bug10377_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug10377_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug13565_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug13565_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug13566
Update of tests database
2017-10-06 10:28:34 +03:00
bug21134
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug21413
0026071: BRepOffsetAPI_MakePipeShell produces rough result
2019-10-22 15:15:48 +03:00
bug21414
Test for 0021414: GeomAPI_IntCS fails to find all intersections between line and surface of revolution
2017-06-29 14:24:54 +03:00
bug22288
Test for 0022288: checkshape works wrong with attached shape.
2017-07-13 12:36:04 +03:00
bug22750
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug22821
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug22886
0022886: Bug in Boolean
2019-09-20 19:39:30 +03:00
bug23171_1
Update of tests database
2017-11-24 15:39:23 +03:00
bug23171_2
Update of tests database
2017-11-24 15:39:23 +03:00
bug23187
Test for 0023187: Cut with a compound
2017-07-20 11:40:37 +03:00
bug23378_1
0023378: BRepAlgoAPI_Cut returns wrong result
2017-06-01 13:55:29 +03:00
bug23378_2
0023378: BRepAlgoAPI_Cut returns wrong result
2017-06-01 13:55:29 +03:00
bug23386
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23610
Update of tests database
2017-11-24 15:39:23 +03:00
bug23612
Update of tests database
2017-11-24 15:39:23 +03:00
bug23660
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug23667
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug23669
Update of tests database
2017-11-24 15:39:23 +03:00
bug23838
0023838: Modeling Data - Standard_OutOfRange in Geom_OffsetSurface::LocalDN (called by BRepFill_PipeShell)
2019-03-20 11:25:06 +03:00
bug23902
Update of tests database
2017-11-24 15:39:23 +03:00
bug23925
Update of tests database
2017-08-10 13:56:12 +03:00
bug23927
0028599: Replacement of old Boolean operations with new ones in BRepProj_Projection algorithm
2018-02-01 18:46:36 +03:00
bug23942
0026071: BRepOffsetAPI_MakePipeShell produces rough result
2019-10-22 15:15:48 +03:00
bug24145_1
Test for 0024145: OCCT fails to project a wire onto BSplineSurface using BRepAlgo_NormalProjection
2017-07-27 13:59:28 +03:00
bug24145_2
Test for 0024145: OCCT fails to project a wire onto BSplineSurface using BRepAlgo_NormalProjection
2017-07-27 13:59:28 +03:00
bug24185
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24215
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24251
0026570: Crash on attempt to rotate a shape.
2017-12-08 16:39:30 +03:00
bug24319
Update of tests database
2017-11-24 15:39:23 +03:00
bug24365
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24421
Update of tests data base for reproduced issues
2017-07-28 15:16:41 +03:00
bug24424
Test for 0024424: BRepAlgoAPI_Cut throws Standard_ConstructionError with disjoint, but adjacent solids
2017-07-27 14:00:09 +03:00
bug24490
Update of tests database
2017-08-10 13:56:12 +03:00
bug24568
Update of tests database
2017-08-10 13:56:12 +03:00
bug24632_1
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug24632_2
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug24632_3
Update of tests database
2017-10-06 10:28:34 +03:00
bug24692
Update of tests database
2017-08-10 13:56:12 +03:00
bug24789
0024789: BOPAlgo_Builder produces invalid result on planar, conical and spherical surfaces
2020-09-18 17:46:50 +03:00
bug24905
0024905: Boolean cut produced invalid result
2018-10-24 18:55:07 +03:00
bug24954_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_3
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_4
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_5
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_6
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_7
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_8
Update of tests database
2017-08-10 13:56:12 +03:00
bug24954_9
Update of tests database
2017-08-10 13:56:12 +03:00
bug25023
0025023: Check fails after cut operation
2017-08-08 17:44:01 +03:00
bug25082_1
0025082: bopcommon returns different result on Windows and Linux system
2018-11-02 17:06:43 +03:00
bug25082_2
0025082: bopcommon returns different result on Windows and Linux system
2018-11-02 17:06:43 +03:00
bug25104
0025104: Prism from BSpline curve can not be chamfered
2017-11-14 15:56:55 +03:00
bug25206
Update of tests database
2017-08-10 13:56:12 +03:00
bug25385
0028599: Replacement of old Boolean operations with new ones in BRepProj_Projection algorithm
2018-02-01 18:46:36 +03:00
bug25395_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug25395_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug25458
Update of tests database
2017-08-10 13:56:12 +03:00
bug25462
0025462: BRepAlgoAPI_Fuse not work correctly for a planar face
2020-09-18 17:46:55 +03:00
bug25478_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug25478_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug25521
Update of tests database
2017-08-10 13:56:12 +03:00
bug25542
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug25626
Update of tests database
2017-08-10 13:56:12 +03:00
bug25730
0028131: BRepOffset_MakeOffset can't create offset with a face which created by filling 3 bsplinecurve
2017-08-30 11:22:47 +03:00
bug25776
Update of tests database
2017-08-10 13:56:12 +03:00
bug25798
Update of tests database
2017-08-10 13:56:12 +03:00
bug25856_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug25856_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug25879
0025879: result of blend fails the bopcheck
2017-11-22 15:45:26 +03:00
bug25930
0027784: Thickness fails on cylinder with draft
2017-11-01 17:01:59 +03:00
bug25939
0031731: Draw Harness - colorize errors and exception messages
2020-08-25 09:44:15 +03:00
bug25966
0025966: Booleans with tangent faces
2017-11-14 15:56:57 +03:00
bug25968
0025968: boolean returning an invalid shape
2017-11-14 15:57:02 +03:00
bug25979
Update of tests database
2017-08-10 13:56:12 +03:00
bug25983_1
0029580: Regression: invalid result of BOP Fuse
2018-03-20 15:18:16 +03:00
bug25983_2
0029580: Regression: invalid result of BOP Fuse
2018-03-20 15:18:16 +03:00
bug25994
0029496: No intersection curve between faces if starting points are given
2018-02-16 15:07:01 +03:00
bug26034
Update of tests database
2017-08-10 13:56:12 +03:00
bug26077_1
Update of tests database
2017-08-10 13:56:12 +03:00
bug26077_2
Update of tests database
2017-08-10 13:56:12 +03:00
bug26225_1
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug26225_2
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug26295
0031731: Draw Harness - colorize errors and exception messages
2020-08-25 09:44:15 +03:00
bug26374
Update of tests database
2017-08-18 12:13:40 +03:00
bug26516
0026516: Creating revolved shapes fails in some cases
2017-08-17 15:47:25 +03:00
bug26558
0031731: Draw Harness - colorize errors and exception messages
2020-08-25 09:44:15 +03:00
bug26563
Update of tests database
2017-08-18 12:13:40 +03:00
bug26568
0026568: Modeling Algorithms - Exception when creating pipe
2020-08-22 12:13:10 +03:00
bug26570
0026570: Crash on attempt to rotate a shape.
2017-12-08 16:39:30 +03:00
bug26604
Update of tests database
2017-08-18 12:13:40 +03:00
bug26655
Update of tests database
2017-08-18 12:13:40 +03:00
bug26697
Update of tests database
2017-08-18 12:13:40 +03:00
bug26776
0026776: Bad result of section algorithm
2017-08-17 15:47:08 +03:00
bug26793_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug26793_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug26795
0026795: Unable to perform General Fuse operation on the attached faces
2017-09-22 11:51:49 +03:00
bug26820
0026820: bsection returns single vertex instead of curve
2018-11-07 18:11:55 +03:00
bug26842_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug26842_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug26876
0029843: Modeling Algorithms - Boolean FUSE produces incorrect result
2019-10-22 15:15:45 +03:00
bug26882
0029843: Modeling Algorithms - Boolean FUSE produces incorrect result
2019-10-22 15:15:45 +03:00
bug26883_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug26883_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug26883_3
Update of tests database
2017-08-18 12:13:40 +03:00
bug26883_4
0029843: Modeling Algorithms - Boolean FUSE produces incorrect result
2019-10-22 15:15:45 +03:00
bug26933
0029133: Unstable test cases
2017-11-02 17:02:45 +03:00
bug27049
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug27087
0027087: [Regression to OCCT 6.7.1] BRepExtrema_DistShapeShape gives wrong result
2020-05-14 20:24:45 +03:00
bug27090
Update of tests database
2017-08-24 21:24:34 +03:00
bug27224
Update of tests database
2017-08-24 21:24:34 +03:00
bug27230
0027230: Boolean operations fails on attached shapes
2018-07-20 16:56:55 +03:00
bug27378
Update of tests database
2017-08-24 21:24:34 +03:00
bug27390_1
Update of tests database
2017-08-24 21:24:34 +03:00
bug27390_2
Update of tests database
2017-08-24 21:24:34 +03:00
bug27419
Update of tests database
2017-08-18 12:13:40 +03:00
bug27469_1
Update of tests database
2017-08-18 12:13:40 +03:00
bug27469_2
Update of tests database
2017-08-18 12:13:40 +03:00
bug27471
Update of tests database
2017-08-18 12:13:40 +03:00
bug27472
Update of tests database
2017-08-18 12:13:40 +03:00
bug27614
Update of tests database
2017-08-18 12:13:40 +03:00
bug27648
0029972: Intersection curve has a weird gap in the middle of it
2018-09-03 17:05:14 +03:00
bug27683
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug27687
Update of tests database
2017-08-24 21:24:34 +03:00
bug27711_1
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug27711_2
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug27711_3
0030435: Improving performance of Approx_ComputeCLine
2019-04-22 14:03:45 +03:00
bug27760
0027760: [regression] BRepAlgoAPI_Common returns empty result
2017-08-24 19:12:01 +03:00
bug27784
0027784: Thickness fails on cylinder with draft
2017-11-01 17:01:59 +03:00
bug27908
0027909: Modeling Algorithms - Exception during offset computation
2020-07-08 16:03:42 +03:00
bug27909
0027909: Modeling Algorithms - Exception during offset computation
2020-07-08 16:03:42 +03:00
bug27910
0027909: Modeling Algorithms - Exception during offset computation
2020-07-08 16:03:42 +03:00
bug27911
0027909: Modeling Algorithms - Exception during offset computation
2020-07-08 16:03:42 +03:00
bug27912
0027909: Modeling Algorithms - Exception during offset computation
2020-07-08 16:03:42 +03:00
bug27913
0027909: Modeling Algorithms - Exception during offset computation
2020-07-08 16:03:42 +03:00
bug27928
0029839: Modeling Algorithms - Unexpected Circle to BSpline surface extrema behavior
2020-07-08 16:03:10 +03:00
bug27936
0027936: [regression] BRepAlgoAPI_Common returns empty result for a solid and a face
2017-08-24 19:12:41 +03:00
bug27948
0029646: Boolean Operations algorithm produces a face with self-intersecting wire
2018-03-29 17:13:12 +03:00
bug27973
0027973: Result of Common operation contains a face with an open wire
2020-09-04 18:14:22 +03:00
bug28085_1
0028085: Incorrect result of CUT operation
2018-07-31 19:21:41 +03:00
bug28102_1
0028102: Problem cutting a plate with several holes (670)
2018-01-25 19:36:37 +03:00
bug28102_2
0028102: Problem cutting a plate with several holes (670)
2018-01-25 19:36:37 +03:00
bug28108
Update of tests database
2017-10-06 10:28:34 +03:00
bug28112_1
0028964: Draw - need to have command to apply ShapeFix_FixSmallFace tool
2017-08-24 19:13:04 +03:00
bug28112_2
0028964: Draw - need to have command to apply ShapeFix_FixSmallFace tool
2017-08-24 19:13:04 +03:00
bug28113_1
0028113: BOPAlgo_Builder produces invalid shape
2018-07-21 13:45:00 +03:00
bug28113_2
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug28119_1
0029910: Porting to Debian80-64 : Regressions in Modeling Algorithms
2018-08-07 17:49:52 +03:00
bug28119_2
Update of tests database
2017-08-24 21:24:34 +03:00
bug28119_3
Update of tests database
2017-08-24 21:24:34 +03:00
bug28123
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug28131
0028131: BRepOffset_MakeOffset can't create offset with a face which created by filling 3 bsplinecurve
2017-08-30 11:22:47 +03:00
bug28144
0028144: Modeling Data, GeomAdaptor_Curve - regression in comparison of version OCCT654
2019-09-16 09:47:26 +03:00
bug28150_1
0028097: Test system does not recognize 'fail...' messages as errors
2018-03-26 15:40:11 +03:00
bug28150_2
0028150: Exception is raised during Boolean operation
2017-09-22 11:52:05 +03:00
bug28151
Update of tests database
2017-08-24 21:24:34 +03:00
bug28157
0028157: Setting the tolerance of a face to a small value and then fixing it leads to a face with vertex-vertex intersections
2017-09-22 11:51:27 +03:00
bug28167
Update of tests database
2017-10-06 10:28:34 +03:00
bug28168
Update of tests database
2017-10-06 10:28:34 +03:00
bug28195_1
0028195: Boolean common returns empty result for a solid where some surfaces of revolution touch the axis
2017-08-29 11:28:43 +03:00
bug28195_2
0028195: Boolean common returns empty result for a solid where some surfaces of revolution touch the axis
2017-08-29 11:28:43 +03:00
bug28200
0028499: Checkshape incorrectly reports BRepCheck_NotClosed when gap is covered by vertex tolerance
2017-12-29 15:44:06 +03:00
bug28211_1
0028211: Modeling Algorithms - Boolean fuse operation produces incorrect result
2018-01-12 14:54:59 +03:00
bug28211_2
0028211: Modeling Algorithms - Boolean fuse operation produces incorrect result
2018-01-12 14:54:59 +03:00
bug28216
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug28245
Update of tests database
2017-10-06 10:28:34 +03:00
bug28248
0028248: [Regression] HLR Algo result is retrieved from the last added shape only
2017-12-20 18:51:43 +03:00
bug28274
0029368: Incorrect intersection state of the intersection point of two 2d curves
2018-01-17 16:43:31 +03:00
bug28279
Update of tests database
2017-10-06 10:28:34 +03:00
bug28354
Update of tests database
2017-10-06 10:28:34 +03:00
bug28366
Update of tests database
2017-10-06 10:28:34 +03:00
bug28385_1
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_2
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_3
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_4
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_5
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_6
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_7
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_8
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_9
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_10
0028385: Improve drawing isolines (DBRep_IsoBuilder algorithm)
2018-01-23 20:11:08 +03:00
bug28385_11
0029368: Incorrect intersection state of the intersection point of two 2d curves
2018-01-17 16:43:31 +03:00
bug28388_1
0028388: Boolean common of simple face and solid results in empty compound
2017-08-30 13:52:36 +03:00
bug28388_2
0028388: Boolean common of simple face and solid results in empty compound
2017-08-30 13:52:36 +03:00
bug28393_1
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug28393_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28402
Update of tests database
2017-10-06 10:28:34 +03:00
bug28485
0029237: Improve performance of Boolean Operations
2017-11-01 17:27:08 +03:00
bug28485_1
0029237: Improve performance of Boolean Operations
2017-11-01 17:27:08 +03:00
bug28499
0028499: Checkshape incorrectly reports BRepCheck_NotClosed when gap is covered by vertex tolerance
2017-12-29 15:44:06 +03:00
bug28544_1
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug28551
Test for 0028551: Bad result of general fuse
2017-07-27 13:59:05 +03:00
bug28571_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28571_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28572_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28572_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28596_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28596_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28640
Update of tests database
2017-10-06 10:28:34 +03:00
bug28656
Update of tests database
2017-10-06 10:28:34 +03:00
bug28696_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28696_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_1
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_2
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_3
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_4
Update of tests database
2017-10-06 10:28:34 +03:00
bug28700_5
Update of tests database
2017-10-06 10:28:34 +03:00
bug28722
0028722: Conversion of a spherical face to a spline produces an invalid shape
2017-12-20 18:51:13 +03:00
bug28739
Update of tests database
2017-10-06 10:28:34 +03:00
bug28763
0028763: Projection of a short line segment on a polar surface causes exception
2017-10-19 12:26:39 +03:00
bug28780
0028780: HLR with focus does not seem to work
2017-08-30 11:22:45 +03:00
bug28784
0030243: Regression in HLR PolyAlgo in OCCT 7.1.0
2018-11-07 18:17:59 +03:00
bug28786_1
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_2
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_3
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_4
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28786_5
0028786: Refactoring of the Warning/Error reporting system of Boolean Operations Algorithm
2017-07-06 12:41:56 +03:00
bug28828_1
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_2
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_3
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_4
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_6
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_7
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_8
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_9
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_10
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_11
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_12
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_13
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_14
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_15
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_16
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_17
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_18
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_19
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_20
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28828_21
0028828: Modeling Algorithms - New functionalities of BRepFilletAPI_MakeChamfer algorithm
2018-11-16 19:16:05 +03:00
bug28830
0028830: HalfSpace command chooses the wrong side of the given shell
2017-06-15 11:31:39 +03:00
bug28844_1
0028844: Regression vs 7.1.0: Exception is raised by the solid classification algorithm
2017-06-22 11:34:18 +03:00
bug28844_2
0028844: Regression vs 7.1.0: Exception is raised by the solid classification algorithm
2017-06-22 11:34:18 +03:00
bug28844_3
0028844: Regression vs 7.1.0: Exception is raised by the solid classification algorithm
2017-06-22 11:34:18 +03:00
bug28849
0028849: [Regression to 7.1.0] Exception in Boolean operation
2017-06-22 12:45:05 +03:00
bug28856
0028856: Extrema between two curves gives wrong result
2017-07-13 17:29:42 +03:00
bug28883_1
0028883: Invalid result of Section operation
2017-07-06 12:41:32 +03:00
bug28883_2
0028085: Incorrect result of CUT operation
2018-07-31 19:21:41 +03:00
bug28892_1
0028892: BOPAlgo_PaveFiller returns status "error: 11" in draw or raises exception in app on the given shapes set
2017-08-17 15:47:50 +03:00
bug28892_2
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug28892_3
0029323: Intersection algorithm produces the curve with oscillation
2017-12-08 16:39:03 +03:00
bug28893_1
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28893_2
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28893_3
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28893_4
0028893: BOP cut produces result with artifacts consisting of tools parts
2017-08-17 15:48:15 +03:00
bug28903
0028903: BRepOffset_MakeOffset produces invalid shape (thickshell) in Intersection mode
2018-03-29 17:13:04 +03:00
bug28909
0028909: Algorithm of BO is stuck while fusing shell and edges
2017-10-06 10:28:17 +03:00
bug28944
0028944: Cannot find section between two faces
2017-08-08 17:40:57 +03:00
bug28949_1
0028949: BRepOffsetAPI_MakePipe Generated() method produces no result for spine edges
2018-09-24 17:54:57 +03:00
bug28949_2
0028949: BRepOffsetAPI_MakePipe Generated() method produces no result for spine edges
2018-09-24 17:54:57 +03:00
bug28949_3
0028949: BRepOffsetAPI_MakePipe Generated() method produces no result for spine edges
2018-09-24 17:54:57 +03:00
bug28949_4
0028949: BRepOffsetAPI_MakePipe Generated() method produces no result for spine edges
2018-09-24 17:54:57 +03:00
bug28949_5
0028949: BRepOffsetAPI_MakePipe Generated() method produces no result for spine edges
2018-09-24 17:54:57 +03:00
bug28949_6
0028949: BRepOffsetAPI_MakePipe Generated() method produces no result for spine edges
2018-09-24 17:54:57 +03:00
bug28949_7
0028949: BRepOffsetAPI_MakePipe Generated() method produces no result for spine edges
2018-09-24 17:54:57 +03:00
bug28967
0028967: Boolean cut fails the first time, works the second time
2017-08-17 15:48:22 +03:00
bug28968
0028968: Incorrect offset for the faces with singularities
2017-08-30 13:52:56 +03:00
bug28982
0028982: 2D offset creates faulty result from wire
2017-08-09 18:11:03 +03:00
bug29038
0029038: Modeling - IntTools_EdgeEdge::FindParameters() hangs on bad curve
2017-09-22 11:51:56 +03:00
bug29073
0029073: Regression: General Cut produces invalid shape
2017-09-28 10:46:50 +03:00
bug29099
0029099: Extra shapes in result of General Cut (box by ellipsoid)
2017-09-22 11:51:47 +03:00
bug29159
0029159: Sewing fail when using a maximum tolerance
2017-10-06 10:28:08 +03:00
bug29175
0029175: BRepOffsetAPI_MakeOffset problem
2017-11-23 13:05:02 +03:00
bug29179
0029179: Result of Boolean common depends on an order of arguments
2017-12-14 17:44:27 +03:00
bug29182
0029182: BOPAlgo_PaveFiller sometimes raises exception in parallel mode
2017-10-19 12:26:47 +03:00
bug29182_1
0029182: BOPAlgo_PaveFiller sometimes raises exception in parallel mode
2017-10-19 12:26:47 +03:00
bug29183
0029183: Result of general fuse of shell and edge produces a shape with too large tolerance
2017-10-19 12:26:52 +03:00
bug29204
0029204: BRepOffsetAPI_MakePipeShell produces invalid result and raises exception in Draw
2017-11-14 15:57:57 +03:00
bug29234
0029234: BRepOffsetAPI_NormalProjection produces INTERNAL edges and vertices
2017-11-14 16:52:41 +03:00
bug29289
0029289: Wrong derivatives in math_TrigonometricFunctionRoots.cxx file
2017-11-27 11:01:21 +03:00
bug29293_1
0029293: Boolean Operations algorithm does not preserve the orientations of the faces
2017-11-08 16:38:56 +03:00
bug29293_2
0029293: Boolean Operations algorithm does not preserve the orientations of the faces
2017-11-08 16:38:56 +03:00
bug29301
0029301: Improve performance of Boolean Operations
2017-11-14 15:57:00 +03:00
bug29311_1
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_2
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_3
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_4
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_5
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_6
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_7
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_8
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_9
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_10
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_11
0029311: Implementation of the Oriented Bounding Boxes (OBB) functionality
2017-12-08 16:39:11 +03:00
bug29311_12
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_13
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_14
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_15
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_16
0029967: Draw Harness - command bounding has annoying syntax
2018-07-27 16:19:26 +03:00
bug29311_17
0026106: BRepMesh - revision of data model
2018-11-02 17:06:40 +03:00
bug29322_1
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_2
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_3
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_4
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29322_5
0029322: Unify faces classification procedures in Boolean Operations
2017-11-23 13:04:52 +03:00
bug29333_1
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug29333_2
0029333: Boolean Operations - Prevent modification of the input shapes in case their sub-shapes have not been modified
2017-11-30 12:11:20 +03:00
bug29334
0029334: Simple offsets complicate geometry
2019-09-02 08:08:37 +03:00
bug29387
0029387: Incorrect result of cut a face with several shapes
2017-12-26 19:06:10 +03:00
bug29400
0029400: Fuse of two edges creates self-interfered shape
2017-12-25 11:47:53 +03:00
bug29430
0029430: [Regression] Curve evaluation at boundary point.
2018-01-17 16:44:57 +03:00
bug29484
0029484: Avoid inheritance of the BRepAlgoAPI_Check from BRepBuilderAPI_MakeShape
2018-02-06 18:57:01 +03:00
bug29488_1
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug29488_2
0029494: Intersection line between two parametric surfaces is restricted incorrectly if it matches the surface boundary
2018-02-16 15:09:10 +03:00
bug29496
0029496: No intersection curve between faces if starting points are given
2018-02-16 15:07:01 +03:00
bug29511
0029511: Section fails for these two faces
2018-06-14 14:03:08 +03:00
bug29524
0029868: Draw Harness - help message for readstl command is unclear
2018-07-06 15:53:48 +03:00
bug29530
0030194: Modeling Algorithms - Intersection points between line and torus are not found
2018-10-16 10:42:37 +03:00
bug29535
0029535: Modeling Algorithms - BRepExtrema_DistShapeShape returns only one solution but the wires have two intersections
2018-03-16 14:57:01 +03:00
bug29573
0029573: ConcatenateWireC0 crashes on two edges wire
2018-07-30 18:39:01 +03:00
bug29580_1
0029839: Modeling Algorithms - Unexpected Circle to BSpline surface extrema behavior
2020-07-08 16:03:10 +03:00
bug29580_2
0029586: Revolution creates solid with degenerated edges shared among faces
2018-06-14 14:03:03 +03:00
bug29586
0029586: Revolution creates solid with degenerated edges shared among faces
2018-06-14 14:03:03 +03:00
bug29606
0029606: [Regression vs 7.0] BRepClass3d_SolidClassifier classifies the point as IN while it is ON
2018-04-02 16:36:31 +03:00
bug29627
0029627: BRepOffsetAPI_NormalProjection class changes orientation of the result
2018-03-23 13:09:50 +03:00
bug29655
0029655: [Regression to 6.9.1] Distance between cylinder and straight line
2018-05-23 06:02:39 +03:00
bug29663
0027531: Modeling Algorithms - Make the algorithm Approx_SameParameter more clear and robust
2020-03-06 15:54:46 +03:00
bug29688
0029688: Regression vs 7.2.0: Wrong result of CUT operation
2018-04-12 12:40:07 +03:00
bug29698
0029698: Regression vs 7.2.0: Common operation raises FLT_INVALID_OPERATION exception
2018-05-23 05:44:12 +03:00
bug29701_1
0026106: BRepMesh - revision of data model
2018-11-02 17:06:40 +03:00
bug29701_2
0026106: BRepMesh - revision of data model
2018-11-02 17:06:40 +03:00
bug29701_3
0026106: BRepMesh - revision of data model
2018-11-02 17:06:40 +03:00
bug29711
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug29712_1
0029712: Extrema algorithm raises exception
2018-06-14 14:03:05 +03:00
bug29731
0029734: Modeling Algorithms - Compute global properties of tessellated shape
2018-06-23 13:12:36 +03:00
bug29734
0029734: Modeling Algorithms - Compute global properties of tessellated shape
2018-06-23 13:12:36 +03:00
bug29789
0029789: Modeling Algorithms - General Fuse produces invalid shape for valid arguments
2020-09-18 17:46:56 +03:00
bug29807_b1
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b2
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b3a
0026106: BRepMesh - revision of data model
2018-11-02 17:06:40 +03:00
bug29807_b3b
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b4a
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b4b
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b5a
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_b5b
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_sc01
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_svm01
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29807_svm02
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29813_1
0029813: BRepFill_PipeShell algorithm produces invalid result
2018-06-14 14:03:08 +03:00
bug29813_2
0029813: BRepFill_PipeShell algorithm produces invalid result
2018-06-14 14:03:08 +03:00
bug29813_3
0029813: BRepFill_PipeShell algorithm produces invalid result
2018-06-14 14:03:08 +03:00
bug29824
0029807: [Regression to 7.0.0] Impossible to cut cone from prism
2018-07-06 15:52:48 +03:00
bug29839
0029839: Modeling Algorithms - Unexpected Circle to BSpline surface extrema behavior
2020-07-08 16:03:10 +03:00
bug29843_1
0029843: Modeling Algorithms - Boolean FUSE produces incorrect result
2019-10-22 15:15:45 +03:00
bug29843_2
0029843: Modeling Algorithms - Boolean FUSE produces incorrect result
2019-10-22 15:15:45 +03:00
bug29857
0029857: Incorrect behavior of Point-Curve Extrema
2018-06-29 12:11:45 +03:00
bug29857_1
0029857: Incorrect behavior of Point-Curve Extrema
2018-06-29 12:11:45 +03:00
bug29861
0029861: Modeling Algorithms - BiTgte_Blend gives exception
2018-07-20 16:58:12 +03:00
bug29887_1
0029887: Wrong result of CUT operation due to incorrect point-face classification
2018-06-23 13:34:38 +03:00
bug29887_2
0029887: Wrong result of CUT operation due to incorrect point-face classification
2018-06-23 13:34:38 +03:00
bug29900
0029711: General Fuse operation produces invalid result
2018-07-27 16:19:15 +03:00
bug29910_1
0029910: Porting to Debian80-64 : Regressions in Modeling Algorithms
2018-08-07 17:49:52 +03:00
bug29939
0029939: Modeling Algorithms - add NULL check to BRepGProp_Face::Load()
2018-07-13 15:03:55 +03:00
bug29955
0029955: Face and Solid BOP: Building 2D curve of edge on face has failed
2018-07-27 16:18:20 +03:00
bug29968
0029968: Modeling Algorithms - BRepAlgoAPI_Cut produces an empty result with half-space
2018-07-20 17:15:53 +03:00
bug29973_1
0029973: Modeling Algorithms - access violation within BRepAlgoAPI_Cut on empty input shape
2018-07-27 16:19:20 +03:00
bug29973_2
0029973: Modeling Algorithms - access violation within BRepAlgoAPI_Cut on empty input shape
2018-07-27 16:19:20 +03:00
bug30090
0030090: Modeling Algorithms - BRepLib::FindValidRange does not find valid range for the edge
2018-09-01 11:10:22 +03:00
bug30092
0030092: Modeling Algorithms - Invalid result of Section operation
2018-09-11 20:24:47 +03:00
bug30140
0030140: Modeling Algorithms - Access Null Pointer
2018-09-19 11:58:32 +03:00
bug30150
0030150: Modeling Algorithms - Removal of BRepAlgo_BooleanOperations and BRepAlgo_DSAccess classes
2018-10-15 20:26:25 +03:00
bug30154_1
0030154: [REGRESSION] Modeling Algorithms - Boolean Operation on planar geometry hangs inside BRepLib::FindValidRange()
2018-09-28 11:07:35 +03:00
bug30154_2
0030154: [REGRESSION] Modeling Algorithms - Boolean Operation on planar geometry hangs inside BRepLib::FindValidRange()
2018-09-28 11:07:35 +03:00
bug30186_1
0030186: BRepOffsetAPI_MakePipe Generated() method produces no results for the spine edges
2018-11-09 17:32:39 +03:00
bug30186_2
0030186: BRepOffsetAPI_MakePipe Generated() method produces no results for the spine edges
2018-11-09 17:32:39 +03:00
bug30186_3
0030186: BRepOffsetAPI_MakePipe Generated() method produces no results for the spine edges
2018-11-09 17:32:39 +03:00
bug30186_4
0030186: BRepOffsetAPI_MakePipe Generated() method produces no results for the spine edges
2018-11-09 17:32:39 +03:00
bug30186_5
0030186: BRepOffsetAPI_MakePipe Generated() method produces no results for the spine edges
2018-11-09 17:32:39 +03:00
bug30194
0030194: Modeling Algorithms - Intersection points between line and torus are not found
2018-10-16 10:42:37 +03:00
bug30196
0030196: [REGRESSION] Modeling Algorithms - Crash in BRepBuilderAPI_GTransform
2019-09-06 18:26:43 +03:00
bug30198
0030198: Regression to 7.1.0: BRepAlgoAPI_Fuse unlimited memory usage
2018-10-10 18:47:18 +03:00
bug30199
0030199: Extrema Point<->Curve gives inaccurate result
2018-10-23 20:08:38 +03:00
bug30202_1
0030202: IntPatch_WLineTool::JoinWLines array out of bounds
2018-10-10 18:47:17 +03:00
bug30203
0030203: ProjLib_ComputeApproxOnPolarSurface::BuildInitialCurve2d array out of bound
2018-10-23 20:09:55 +03:00
bug30204_1
0030204: BRepOffsetAPI_MakePipeShell crash
2018-10-18 19:10:55 +03:00
bug30204_2
0030204: BRepOffsetAPI_MakePipeShell crash
2018-10-18 19:10:55 +03:00
bug30230
0030230: An optimal bounding box of a face is too large
2018-10-18 19:06:09 +03:00
bug30269
0030269: Modeling Algorithms - unhandled Standard_NullObject within BRepBndLib::Add()
2018-10-22 18:29:28 +03:00
bug30270
0030270: Modeling Algorithms - BRepBndLib should provide an option for skipping infinite entities
2018-10-24 22:53:26 +03:00
bug30273
0031489: Data Exchange - STEP Reader can't read a big file
2020-09-09 19:32:00 +03:00
bug30281
0030281: Regression to 7.2.0: Modeling Algorithms - Wrong result of CUT operation
2018-10-31 17:46:21 +03:00
bug30346_1
0030346: Modeling Algorithms - BRepPrimAPI_MakeRevol throws "BRepSweep_Translation::MakeEmptyVertex"
2018-12-28 15:54:30 +03:00
bug30346_2
0031031: Incorrect result is returned from BRepPrimAPI_MakePrism::Generated()
2019-10-22 15:15:43 +03:00
bug30354
0030354: BOP Cut doesn't modify the attached face
2018-11-15 17:34:42 +03:00
bug30363
0030363: BRepLib::SameParameter with option "forced" corrupts valid shape
2018-12-03 15:57:36 +03:00
bug30386_1
0030386: Modeling Algorithms - Unable to perform Cut operation
2020-03-04 19:17:16 +03:00
bug30386_2
0030386: Modeling Algorithms - Unable to perform Cut operation
2020-03-04 19:17:16 +03:00
bug30386_3
0030386: Modeling Algorithms - Unable to perform Cut operation
2020-03-04 19:17:16 +03:00
bug30386_4
0030386: Modeling Algorithms - Unable to perform Cut operation
2020-03-04 19:17:16 +03:00
bug30386_5
0030386: Modeling Algorithms - Unable to perform Cut operation
2020-03-04 19:17:16 +03:00
bug30391_1
0030391: Improvement of the method BRepOffset_Tool::EnLargeFace
2018-12-11 19:15:54 +03:00
bug30391_2
0030391: Improvement of the method BRepOffset_Tool::EnLargeFace
2018-12-11 19:15:54 +03:00
bug30391_3
0030391: Improvement of the method BRepOffset_Tool::EnLargeFace
2018-12-11 19:15:54 +03:00
bug30395
0030395: DRAW bop: Some sub-shapes of some of the argument become connected through other shapes and the argument became self-interfered.
2018-12-13 13:32:53 +03:00
bug30396_1
0030396: Infinite recursion during ShapeFix after BRepAlgoAPI_Cut
2018-12-21 19:45:20 +03:00
bug30396_2
0030396: Infinite recursion during ShapeFix after BRepAlgoAPI_Cut
2018-12-21 19:45:20 +03:00
bug30433
0030433: Checkshape: bad solid, created by revolution, is reported as valid.
2019-05-06 15:57:56 +03:00
bug30490
0030490: Modeling Algorithms - Incomplete result of Cut operation
2019-03-06 20:20:10 +03:00
bug30522
0030522: Modeling Algorithms - BRepBuilderAPI_MakeWire produces different wires depending on the order of parameters
2019-03-22 17:21:01 +03:00
bug30559
0030559: BOP Fuse: result is inconsistent
2020-09-27 12:00:04 +03:00
bug30560_1
0030560: Modeling Algorithms - Improvement of the method BRepTools::DetectClosedness
2019-03-16 16:46:50 +03:00
bug30560_2
0030560: Modeling Algorithms - Improvement of the method BRepTools::DetectClosedness
2019-03-16 16:46:50 +03:00
bug30590_1
0030590: Wrong result of Boolean Cut algorithm
2019-05-24 12:11:52 +03:00
bug30590_2
0030590: Wrong result of Boolean Cut algorithm
2019-05-24 12:11:52 +03:00
bug30590_3
0030590: Wrong result of Boolean Cut algorithm
2019-05-24 12:11:52 +03:00
bug30595_1
0030595: Oriented Bounding Box seems not optimal for some shapes
2019-06-17 09:26:54 +03:00
bug30595_2
0030595: Oriented Bounding Box seems not optimal for some shapes
2019-06-17 09:26:54 +03:00
bug30595_3
0030595: Oriented Bounding Box seems not optimal for some shapes
2019-06-17 09:26:54 +03:00
bug30597
0030597: Result of BRepOffsetAPI_MakePipeShell doesn't match the given profiles
2019-12-19 16:53:36 +03:00
bug30621
0030621: Implementation of building U-periodical surfaces.
2019-04-23 18:12:16 +03:00
bug30629
0030629: Modeling Algorithms - Invalid result of fuse operation
2019-04-08 16:03:41 +03:00
bug30645_1
0030645: Modeling Algorithms - B-spline segmentation produces wrong parametrization
2019-04-23 18:17:47 +03:00
bug30645_2
0030645: Modeling Algorithms - B-spline segmentation produces wrong parametrization
2019-04-23 18:17:47 +03:00
bug30645_3
0030645: Modeling Algorithms - B-spline segmentation produces wrong parametrization
2019-04-23 18:17:47 +03:00
bug30647
0030647: Geom2dGcc_Circ2d2TanRad not giving all the solutions
2019-04-16 14:07:45 +03:00
bug30679
0030679: Attached model hangs most of OCCT common functionality
2019-05-16 19:46:25 +03:00
bug30760
0030760: Modeling Algorithms - Intersection fails in Occt 7.3.0
2019-06-05 13:35:24 +03:00
bug30778
0030778: [Regression to 7.3.0] Extrema raises exception StdFail_InfiniteSolutions
2019-09-06 18:26:44 +03:00
bug30786
0030786: BOP Cut: artifacts with enabled nondestructive flag
2020-09-18 17:46:49 +03:00
bug30787
0030795: BRepOffsetAPI_MakePipeShell: hangs on the attached model and produces infinite rails
2020-09-03 20:00:47 +03:00
bug30792
0030792: Modeling Algorithms, BOP Fuse - some parts of the shape are dropped
2020-09-16 19:32:57 +03:00
bug30794_1
0030817: Modeling Algorithms - BRepOffsetAPI_MakePipeShell produces invalid result
2019-06-27 16:07:14 +03:00
bug30794_2
0030817: Modeling Algorithms - BRepOffsetAPI_MakePipeShell produces invalid result
2019-06-27 16:07:14 +03:00
bug30794_3
0030817: Modeling Algorithms - BRepOffsetAPI_MakePipeShell produces invalid result
2019-06-27 16:07:14 +03:00
bug30794_4
0030817: Modeling Algorithms - BRepOffsetAPI_MakePipeShell produces invalid result
2019-06-27 16:07:14 +03:00
bug30795
0030795: BRepOffsetAPI_MakePipeShell: hangs on the attached model and produces infinite rails
2020-09-03 20:00:47 +03:00
bug30817
0030817: Modeling Algorithms - BRepOffsetAPI_MakePipeShell produces invalid result
2019-06-27 16:07:14 +03:00
bug30829
0030829: BRepExtrema_ShapeProximity crashes with shape from STL/WRL
2019-07-18 11:09:08 +03:00
bug30869
0030869: Modeling Data - BRepAdaptor_CompCurve incorrectly evaluates the boundary points
2019-08-09 17:36:46 +03:00
bug30880_1
0030880: Modeling Algorithms - Bug in BRepExtrema_ExtCF
2019-09-06 19:23:19 +03:00
bug30880_2
0030880: Modeling Algorithms - Bug in BRepExtrema_ExtCF
2019-09-06 19:23:19 +03:00
bug30903
0030903: Bug in IntCurvesFace_ShapeIntersector
2019-08-29 19:03:48 +03:00
bug30913_1
0030913: Invalid result of Fusing slices
2019-08-29 19:04:39 +03:00
bug30913_2
0030913: Invalid result of Fusing slices
2019-08-29 19:04:39 +03:00
bug30940_1
0030940: BRepFilletAPI_MakeFillet algorithm fails on closed shell
2019-10-22 15:15:49 +03:00
bug30940_2
0030940: BRepFilletAPI_MakeFillet algorithm fails on closed shell
2019-10-22 15:15:49 +03:00
bug30940_3
0030940: BRepFilletAPI_MakeFillet algorithm fails on closed shell
2019-10-22 15:15:49 +03:00
bug30940_4
0030940: BRepFilletAPI_MakeFillet algorithm fails on closed shell
2019-10-22 15:15:49 +03:00
bug30940_5
0030940: BRepFilletAPI_MakeFillet algorithm fails on closed shell
2019-10-22 15:15:49 +03:00
bug30940_6
0030940: BRepFilletAPI_MakeFillet algorithm fails on closed shell
2019-10-22 15:15:49 +03:00
bug30944
0030944: [Regression to 7.0.0] Modeling Algorithms - Intersection curves between pair of faces are not found
2020-08-03 10:52:59 +03:00
bug30949
0030949: Foundation Classes - Dump improvement for OCCT classes
2019-09-20 19:39:28 +03:00
bug30958
0030958: BRepOffsetAPI_ThruSections operation raises an exception while building history
2019-11-14 22:40:01 +03:00
bug31016_01
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_02
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_03
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_04
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_05
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_06
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_07
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_08
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_09
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_10
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_11
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_12
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_13
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_14
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_15
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_16
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_17
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_18
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_19
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_20
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_21
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_22
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_23
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31016_24
0031016: Projection of an ellipse is a B-spline in some cases
2020-07-20 16:57:29 +03:00
bug31023
0031023: Fillet regression in OCCT 7.4 from 7.3
2019-10-22 15:15:50 +03:00
bug31029
0031029: BRepLib::SameParameter regression in OCCT 7.4 from OCCT 7.3
2019-10-22 15:15:44 +03:00
bug31030
0030940: BRepFilletAPI_MakeFillet algorithm fails on closed shell
2019-10-22 15:15:49 +03:00
bug31031
0031031: Incorrect result is returned from BRepPrimAPI_MakePrism::Generated()
2019-10-22 15:15:43 +03:00
bug31043
0031043: GCPnts_TangentialDeflection generates points which number is inconsistent with MinimumOfPoints Parameter
2019-10-29 11:04:53 +03:00
bug31120
0031120: Memory leak in BRepOffsetAPI_MakeOffset
2019-12-17 15:51:06 +03:00
bug31201_1
0031201: Modeling Algorithms - Result of a section operation is incomplete
2019-11-29 09:59:01 +03:00
bug31201_2
0031201: Modeling Algorithms - Result of a section operation is incomplete
2019-11-29 09:59:01 +03:00
bug31201_3
0031201: Modeling Algorithms - Result of a section operation is incomplete
2019-11-29 09:59:01 +03:00
bug31203
0031203: Test harness command "bsection" on the planar faces return only one vertex instead edge representing intersection line
2019-12-19 16:45:54 +03:00
bug31207
0031207: Regression in Boolean Operations: fuse gives wrong result
2020-04-16 10:00:54 +03:00
bug31242
0031242: Scaling with different coefficients along axes produces invalid shape
2019-12-23 11:49:04 +03:00
bug31260
0031260: Geom2dGcc_Circ2d2TanRad fails in this case (720)
2020-01-16 18:20:01 +03:00
bug31294
0031294: Modeling Algorithms - Regression relatively 7.3.0. Crash in method BRepPrimAPI_MakePrism::Generated(...)
2020-01-14 18:26:50 +03:00
bug31306
0031306: Modeling Algorithms - Incomplete result of Cut operation
2020-01-22 10:15:21 +03:00
bug31404
0031404: Modeling Algorithms - BOP Fuse produces a self-interfering or a good shape depending on the order of arguments
2020-03-19 19:00:58 +03:00
bug31407_1
0031407: [Regression to 7.3.0] Extrema does not process parallel circles correctly
2020-03-06 16:05:19 +03:00
bug31407_2
0031407: [Regression to 7.3.0] Extrema does not process parallel circles correctly
2020-03-06 16:05:19 +03:00
bug31407_3
0031407: [Regression to 7.3.0] Extrema does not process parallel circles correctly
2020-03-06 16:05:19 +03:00
bug31415
0031415: Modeling Algorithms - Solid classifier works incorrectly on a cylinder
2020-03-26 19:54:58 +03:00
bug31430
0031430: Offset surfaces on C1 surfaces (with multiplicity equal to degree) may still throw exception
2020-03-18 19:38:12 +03:00
bug31460
0031460: Modeling Algorithms - Regression: Revolution not done.
2020-03-24 19:57:37 +03:00
bug31462
0031462: Modeling Algorithms - BOP result depends on the arguments order
2020-04-01 20:44:23 +03:00
bug31469
0031469: BRepFeat_MakePrism failed
2020-04-10 17:41:39 +03:00
bug31470
0031470: Modeling Algorithms - Regression: BOP common produces empty result (box and holed sphere)
2020-04-16 09:58:15 +03:00
bug31492
0031492: BRepBuilderAPI_MakeFace crashes on a wire
2020-04-20 20:36:27 +03:00
bug31496
0031496: Modeling Algorithms - BRepAlgo::ConcatenateWireC0() crashes
2020-04-16 09:59:25 +03:00
bug31499_1
0031499: Boolean Operations - Custom fuzzy value corrupts the result of CUT
2020-04-16 10:01:55 +03:00
bug31499_2
0031499: Boolean Operations - Custom fuzzy value corrupts the result of CUT
2020-04-16 10:01:55 +03:00
bug31604
0031604: Wrong result of Boolean Operation Cut
2020-07-08 16:03:10 +03:00
bug31611
0031611: Modeling Algorithms - BRepOffsetAPI_NormalProjection - can't build wire in 720 but it was possible in 691
2020-06-18 19:57:46 +03:00
bug31616
0031616: Modeling algorithm - Section between two shells returns wire with gaps (720)
2020-07-01 17:50:56 +03:00
bug31655
0031655: Modeling Algorithms - Invalid result of General Fuse operation
2020-07-11 11:26:31 +03:00
bug31662
0024789: BOPAlgo_Builder produces invalid result on planar, conical and spherical surfaces
2020-09-18 17:46:50 +03:00