0029506: DRAW command "incmesh" hangs on the attached planar face with specified deflection.

Added test case

CMakeLists.txt

@@ -86,6 +86,11 @@ if (BUILD_WITH_DEBUG)
   set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS $<$<CONFIG:DEBUG>:OCCT_DEBUG>)
 endif()
 
+# option disabling OCCT exceptions in Release builds (No_Exception)
+if (NOT DEFINED BUILD_RELEASE_DISABLE_EXCEPTIONS)
+  set (BUILD_RELEASE_DISABLE_EXCEPTIONS ON CACHE BOOL "${BUILD_RELEASE_DISABLE_EXCEPTIONS_DESCR}")
+endif()
+
 # option to enable or disable use of precompiled headers
 if (NOT DEFINED BUILD_USE_PCH)
   set (BUILD_USE_PCH OFF CACHE BOOL "${BUILD_USE_PCH_DESCR}")
@@ -628,6 +633,26 @@ else()
   OCCT_CHECK_AND_UNSET ("INSTALL_TBB")
 endif()
 
+# RapidJSON
+# search for CSF_RapidJSON variable in EXTERNLIB of each being used toolkit
+OCCT_IS_PRODUCT_REQUIRED (CSF_RapidJSON CAN_USE_RAPIDJSON)
+if (CAN_USE_RAPIDJSON)
+  set (USE_RAPIDJSON OFF CACHE BOOL "${USE_RAPIDJSON_DESCR}")
+
+  if (USE_RAPIDJSON)
+    add_definitions (-DHAVE_RAPIDJSON)
+    OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/rapidjson")
+  else()
+    OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_RAPIDJSON")
+    OCCT_CHECK_AND_UNSET ("INSTALL_RAPIDJSON")
+  endif()
+else()
+  OCCT_CHECK_AND_UNSET ("USE_RAPIDJSON")
+
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_RAPIDJSON")
+  OCCT_CHECK_AND_UNSET ("INSTALL_RAPIDJSON")
+endif()
+
 # EIGEN
 if (CAN_USE_EIGEN)
   set (USE_EIGEN OFF CACHE BOOL "${USE_EIGEN_DESCR}")

adm/.gitignore

@@ -0,0 +1 @@
+/build-*

adm/MODULES

@@ -3,5 +3,5 @@ ModelingData TKG2d TKG3d TKGeomBase TKBRep
 ModelingAlgorithms TKGeomAlgo TKTopAlgo TKPrim TKBO TKBool TKHLR TKFillet TKOffset TKFeat TKMesh TKXMesh TKShHealing
 Visualization TKService TKV3d TKOpenGl TKMeshVS TKIVtk TKD3DHost
 ApplicationFramework TKCDF TKLCAF TKCAF TKBinL TKXmlL TKBin TKXml TKStdL TKStd TKTObj TKBinTObj TKXmlTObj TKVCAF
-DataExchange TKXSBase TKSTEPBase TKSTEPAttr TKSTEP209 TKSTEP TKIGES TKXCAF TKXDEIGES TKXDESTEP TKSTL TKVRML TKXmlXCAF TKBinXCAF
+DataExchange TKXSBase TKSTEPBase TKSTEPAttr TKSTEP209 TKSTEP TKIGES TKXCAF TKXDEIGES TKXDESTEP TKSTL TKVRML TKXmlXCAF TKBinXCAF TKRWMesh
 Draw TKDraw TKTopTest TKViewerTest TKXSDRAW TKDCAF TKXDEDRAW TKTObjDRAW TKQADraw TKIVtkDraw DRAWEXE

adm/UDLIST

@@ -203,6 +203,7 @@ n Aspect
 n DsgPrs
 n Graphic3d
 n Image
+n Media
 n MeshVS
 n OpenGl
 n D3DHost
@@ -438,3 +439,7 @@ n Geom2dEvaluator
 t TKVCAF
 n XCAFView
 n XCAFNoteObjects
+t TKRWMesh
+n RWGltf
+n RWMesh
+n RWObj

adm/cmake/3rdparty_macro.cmake

@@ -133,7 +133,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
         # set 3RDPARTY_${PRODUCT_NAME}_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_LIBRARY
         set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} "3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}-NOTFOUND" CACHE FILEPATH "The path to ${PRODUCT_NAME} library \"${LIBRARY_NAME}\"" FORCE)
 
-        if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
+        if ((3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}") OR (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME}}"))
           find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} NAMES ${LIBRARY_NAME}
                                                                                 PATHS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME}}" "${3RDPARTY_${PRODUCT_NAME}_DIR}"
                                                                                 PATH_SUFFIXES ${${PRODUCT_NAME}_PATH_SUFFIXES}
@@ -181,9 +181,9 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
           # set 3RDPARTY_${PRODUCT_NAME}_DLL as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_DLL
           set (3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX} "3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX}-NOTFOUND" CACHE FILEPATH "The path to ${PRODUCT_NAME} shared library \"${LIBRARY_NAME}\"" FORCE)
 
-          if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
+          if ((3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}") OR (3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME}}"))
             find_library (3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX}  NAMES ${LIBRARY_NAME}
-                                                                               PATHS "${3RDPARTY_${PRODUCT_NAME}_DIR}"
+                                                                               PATHS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME}}" "${3RDPARTY_${PRODUCT_NAME}_DIR}"
                                                                                PATH_SUFFIXES bin  win${COMPILER_BITNESS}/${COMPILER}/bin
                                                                                NO_DEFAULT_PATH)
             if (3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX} STREQUAL "3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX}-NOTFOUND")

adm/cmake/occt_csf.cmake

@@ -65,6 +65,7 @@ if (WIN32)
   set (CSF_shell32       "shell32.lib")
   set (CSF_wsock32       "wsock32.lib")
   set (CSF_psapi         "psapi.lib")
+  set (CSF_winmm         "winmm.lib")
   set (CSF_d3d9          "D3D9.lib")
   if ("${CMAKE_SYSTEM_NAME}" STREQUAL "WindowsStore" OR USE_GLES2)
     set (CSF_OpenGlLibs  "libEGL libGLESv2")
@@ -72,28 +73,35 @@ if (WIN32)
     set (CSF_OpenGlLibs  "opengl32.lib")
   endif()
 
-  else()
+else()
 
   if (APPLE)
     set (CSF_objc        "objc")
 
     # frameworks
-    find_library (Appkit_LIB NAMES AppKit)
-    set (CSF_Appkit ${Appkit_LIB})
+    if (IOS)
+      find_library (Appkit_LIB NAMES UIKit)
+      set (CSF_Appkit ${Appkit_LIB})
+    else()
+      find_library (Appkit_LIB NAMES AppKit)
+      set (CSF_Appkit ${Appkit_LIB})
+    endif()
+    OCCT_CHECK_AND_UNSET (Appkit_LIB)
 
     find_library (IOKit_LIB NAMES IOKit)
     set (CSF_IOKit ${IOKit_LIB})
-
-    OCCT_CHECK_AND_UNSET (Appkit_LIB)
     OCCT_CHECK_AND_UNSET (IOKit_LIB)
 
-    if (USE_GLX)
+    if (IOS)
+      find_library (OpenGlLibs_LIB NAMES OpenGLES)
+      set (CSF_OpenGlLibs ${OpenGlLibs_LIB})
+      OCCT_CHECK_AND_UNSET (OpenGlLibs_LIB)
+    elseif (USE_GLX)
       set (CSF_OpenGlLibs GL)
       set (CSF_XwLibs     "X11 Xext Xmu Xi")
     else()
       find_library (OpenGlLibs_LIB NAMES OpenGL)
       set (CSF_OpenGlLibs ${OpenGlLibs_LIB})
-
       OCCT_CHECK_AND_UNSET (OpenGlLibs_LIB)
     endif()
     
@@ -109,5 +117,6 @@ if (WIN32)
     endif()
     set (CSF_XwLibs      "X11 Xext Xmu Xi")
     set (CSF_dl          "dl")
+    set (CSF_fontconfig  "fontconfig")
   endif()
 endif()

adm/cmake/occt_defs_flags.cmake

@@ -143,5 +143,7 @@ if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX OR MINGW)
   set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -s")
 endif()
 
-set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -DNo_Exception")
-set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DNo_Exception")
+if (BUILD_RELEASE_DISABLE_EXCEPTIONS)
+  set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -DNo_Exception")
+  set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DNo_Exception")
+endif()

adm/cmake/occt_macros.cmake

@@ -163,13 +163,18 @@ function (FIND_PRODUCT_DIR ROOT_DIR PRODUCT_NAME RESULT)
   OCCT_MAKE_COMPILER_BITNESS()
 
   string (TOLOWER "${PRODUCT_NAME}" lower_PRODUCT_NAME)
-
-  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*${COMPILER}.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+")
-  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*")
+  if ("${lower_PRODUCT_NAME}" STREQUAL "egl")
+    string (SUBSTRING "${lower_PRODUCT_NAME}" 1 -1 lower_PRODUCT_NAME)
+    list (APPEND SEARCH_TEMPLATES "[^gl]+${lower_PRODUCT_NAME}.*")
+  else()
+    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*${COMPILER}.*${COMPILER_BITNESS}")
+    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
+    list (APPEND SEARCH_TEMPLATES "^[a-zA-Z]*[0-9]*-${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
+    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER_BITNESS}")
+    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*.*${COMPILER_BITNESS}")
+    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+")
+    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*")
+  endif()
 
   SUBDIRECTORY_NAMES ("${ROOT_DIR}" SUBDIR_NAME_LIST)
 

adm/cmake/rapidjson.cmake

@@ -0,0 +1,86 @@
+# RapidJSON
+
+if (NOT DEFINED INSTALL_RAPIDJSON)
+  set (INSTALL_RAPIDJSON OFF CACHE BOOL "${INSTALL_RAPIDJSON_DESCR}")
+endif()
+
+# RapidJSON directory
+if (NOT DEFINED 3RDPARTY_RAPIDJSON_DIR)
+  set (3RDPARTY_RAPIDJSON_DIR "" CACHE PATH "The directory containing RapidJSON")
+endif()
+
+# search for RapidJSON in user defined directory
+if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
+  if (NOT 3RDPARTY_RAPIDJSON_DIR OR NOT EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
+    FIND_PRODUCT_DIR("${3RDPARTY_DIR}" RapidJSON RAPIDJSON_DIR_NAME)
+    if (RAPIDJSON_DIR_NAME)
+      set (3RDPARTY_RAPIDJSON_DIR "${3RDPARTY_DIR}/${RAPIDJSON_DIR_NAME}" CACHE PATH "The directory containing RapidJSON" FORCE)
+    endif()
+  endif()
+endif()
+
+if (NOT DEFINED 3RDPARTY_RAPIDJSON_INCLUDE_DIR)
+  set (3RDPARTY_RAPIDJSON_INCLUDE_DIR  "" CACHE FILEPATH "The directory containing headers of the RAPIDJSON")
+endif()
+
+if (NOT 3RDPARTY_RAPIDJSON_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
+
+  set (HEADER_NAMES rapidjson/rapidjson.h)
+
+  set (3RDPARTY_RAPIDJSON_INCLUDE_DIR "3RDPARTY_RAPIDJSON_INCLUDE_DIR-NOTFOUND" CACHE PATH "the path to RapidJSON header file" FORCE)
+
+  if (3RDPARTY_RAPIDJSON_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
+    find_path (3RDPARTY_RAPIDJSON_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                              PATHS ${3RDPARTY_RAPIDJSON_DIR}
+                                              PATH_SUFFIXES include rapidjson
+                                              CMAKE_FIND_ROOT_PATH_BOTH
+                                              NO_DEFAULT_PATH)
+  else()
+    find_path (3RDPARTY_RAPIDJSON_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                              PATH_SUFFIXES include rapidjson
+                                              CMAKE_FIND_ROOT_PATH_BOTH)
+  endif()
+
+  # use default (CMake) RapidJSON search
+  if (NOT 3RDPARTY_RAPIDJSON_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
+    if (3RDPARTY_RAPIDJSON_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
+      set (CACHED_RAPIDJSON_DIR $ENV{RapidJSON_DIR})
+      set (ENV{RapidJSON_DIR} "${3RDPARTY_RAPIDJSON_DIR}")
+    endif()
+
+    find_package(RapidJSON QUIET)
+
+    # restore ENV{RapidJSON_DIR}
+    if (3RDPARTY_RAPIDJSON_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
+      set (ENV{RapidJSON_DIR} ${CACHED_RAPIDJSON_DIR})
+    endif()
+
+    if (${RAPIDJSON_FOUND})
+      set (3RDPARTY_RAPIDJSON_INCLUDE_DIR "${RAPIDJSON_INCLUDE_DIR}" CACHE PATH "the path to RapidJSON header file" FORCE)
+      set (3RDPARTY_RAPIDJSON_DIR         "${RAPIDJSON_ROOT_DIR}"    CACHE PATH "The directory containing RapidJSON" FORCE)
+    endif()
+  endif()
+endif()
+
+if (3RDPARTY_RAPIDJSON_INCLUDE_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
+  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
+
+  # Install header files
+  if (INSTALL_RAPIDJSON)
+    file(GLOB RAPIDJSON_SUBDIRS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}/*")
+    foreach(SUBDIR ${RAPIDJSON_SUBDIRS})
+      if(IS_DIRECTORY "${SUBDIR}")
+        install (DIRECTORY "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
+      else()
+        install (FILES "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
+      endif()
+    endforeach()
+  endif()
+else()
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_RAPIDJSON_INCLUDE_DIR)
+
+  set (3RDPARTY_RAPIDJSON_INCLUDE_DIR "" CACHE PATH "the path to RapidJSON header file" FORCE)
+endif()
+
+# unset all redundant variables
+OCCT_CHECK_AND_UNSET(RapidJSON_DIR)

adm/cmake/vardescr.cmake

@@ -28,6 +28,11 @@ Applies only for Debug configuration.")
 set (BUILD_SHARED_LIBRARY_NAME_POSTFIX_DESCR
 "Append the postfix to names of output libraries")
 
+set (BUILD_RELEASE_DISABLE_EXCEPTIONS_DESCR
+"Disables exceptions like Standard_OutOfRange in Release builds.
+Defines No_Exception macros for Release builds when enabled (default).
+These exceptions are always enabled in Debug builds, but disable in Release for better performance")
+
 set (BUILD_ENABLE_FPE_SIGNAL_HANDLER_DESCR
 "Enable/Disable the floating point exceptions (FPE) during DRAW execution only.
 Corresponding environment variable (CSF_FPE) can be changed manually
@@ -89,6 +94,7 @@ INSTALL_MESSAGE (INSTALL_EGL              "EGL binaries")
 INSTALL_MESSAGE (INSTALL_GLES2            "OpenGL ES 2.0 binaries")
 INSTALL_MESSAGE (INSTALL_FREETYPE         "FreeType binaries")
 INSTALL_MESSAGE (INSTALL_TBB              "TBB binaries")
+INSTALL_MESSAGE (INSTALL_RAPIDJSON        "RapidJSON header files")
 INSTALL_MESSAGE (INSTALL_TCL              "TCL binaries")
 INSTALL_MESSAGE (INSTALL_TK               "TK binaries")
 INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
@@ -156,6 +162,10 @@ set (USE_FREEIMAGE_DESCR
 "Indicates whether Freeimage product should be used in OCCT visualization
 module for support of popular graphics image formats (PNG, BMP etc)")
 
+set (USE_RAPIDJSON_DESCR
+"Indicates whether RapidJSON product should be used in OCCT DataExchange
+module for support of JSON-based formats like glTF")
+
 set (USE_EGL_DESCR
 "Indicates whether EGL should be used in OCCT visualization
 module instead of conventional OpenGL context creation APIs")

adm/genconf.tcl

@@ -30,10 +30,30 @@ set aRowIter 0
 set aCheckRowIter 0
 frame .myFrame -padx 5 -pady 5
 pack  .myFrame -fill both -expand 1
+frame .myFrame.myPrjFrame
 frame .myFrame.myVsFrame
 frame .myFrame.myHxxChecks
 frame .myFrame.myChecks
 
+# project file format
+set SYS_PRJFMT_LIST {}
+set SYS_PRJNAME_LIST {}
+if { "$::tcl_platform(platform)" == "windows" } {
+  lappend ::SYS_PRJFMT_LIST "vcxproj"
+  lappend ::SYS_PRJNAME_LIST "Visual Studio (.vcxproj)"
+}
+if { "$tcl_platform(os)" == "Darwin" } {
+  lappend ::SYS_PRJFMT_LIST "xcd"
+  lappend ::SYS_PRJNAME_LIST "XCode (.xcd)"
+}
+lappend ::SYS_PRJFMT_LIST "cbp"
+lappend ::SYS_PRJNAME_LIST "Code Blocks (.cbp)"
+lappend ::SYS_PRJFMT_LIST "pro"
+lappend ::SYS_PRJNAME_LIST "Qt Creator (.pro)"
+
+set aPrjIndex [lsearch $::SYS_PRJFMT_LIST $::PRJFMT]
+set ::PRJNAME [lindex $::SYS_PRJNAME_LIST $aPrjIndex]
+
 set SYS_VS_LIST {}
 set SYS_VC_LIST {}
 set SYS_VCVARS_LIST {}
@@ -101,6 +121,7 @@ proc wokdep:gui:Close {} {
 }
 
 proc wokdep:gui:SwitchConfig {} {
+  set ::PRJFMT [lindex $::SYS_PRJFMT_LIST [.myFrame.myPrjFrame.myPrjCombo current]]
   set ::VCVER  [lindex $::SYS_VC_LIST     [.myFrame.myVsFrame.myVsCombo current]]
   set ::VCVARS [lindex $::SYS_VCVARS_LIST [.myFrame.myVsFrame.myVsCombo current]]
 
@@ -168,6 +189,9 @@ proc wokdep:gui:UpdateList {} {
     }
     wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "liblzma" "lzma.h" "$aCheckLib" {"lzma" "xz"}
   }
+  if { "$::HAVE_RAPIDJSON" == "true" } {
+    wokdep:SearchRapidJson anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
+  }
 
   if { "$::CHECK_QT4" == "true" } {
     wokdep:SearchQt4     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
@@ -390,6 +414,8 @@ proc wokdep:gui:Show64Bitness { theRowIter } {
 }
 
 # Header
+ttk::label    .myFrame.myPrjFrame.myPrjLbl     -text "Project format:" -padding {5 5 20 5}
+ttk::combobox .myFrame.myPrjFrame.myPrjCombo   -values $SYS_PRJNAME_LIST -state readonly -textvariable PRJNAME -width 40
 ttk::label    .myFrame.myVsFrame.myVsLbl       -text "Visual Studio configuration:" -padding {5 5 20 5}
 ttk::combobox .myFrame.myVsFrame.myVsCombo     -values $SYS_VS_LIST -state readonly -textvariable VSVER -width 40
 ttk::combobox .myFrame.myVsFrame.myArchCombo   -values { {32} {64} } -textvariable ARCH -state readonly -width 6
@@ -433,6 +459,9 @@ ttk::label    .myFrame.myChecks.myZLibLbl       -text "Use zlib"
 checkbutton   .myFrame.myChecks.myLzmaCheck     -offvalue "false" -onvalue "true" -variable HAVE_LIBLZMA   -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myLzmaLbl       -text "Use liblzma"
 
+checkbutton   .myFrame.myChecks.myRapidJsonCheck -offvalue "false" -onvalue "true" -variable HAVE_RAPIDJSON -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myRapidJsonLbl   -text "Use RapidJSON"
+
 checkbutton   .myFrame.myChecks.myQt4Check      -offvalue "false" -onvalue "true" -variable CHECK_QT4      -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myQt4Lbl        -text "Search Qt4"
 checkbutton   .myFrame.myChecks.myJDKCheck      -offvalue "false" -onvalue "true" -variable CHECK_JDK      -command wokdep:gui:UpdateList
@@ -494,6 +523,10 @@ ttk::button   .myFrame.myClose -text "Close" -command wokdep:gui:Close
 
 # Create grid
 # Header
+grid .myFrame.myPrjFrame            -row $aRowIter -column 0 -columnspan 10 -sticky w
+grid .myFrame.myPrjFrame.myPrjLbl   -row 0 -column 0
+grid .myFrame.myPrjFrame.myPrjCombo -row 0 -column 1
+incr aRowIter
 if { "$tcl_platform(platform)" == "windows" } {
   grid .myFrame.myVsFrame               -row $aRowIter -column 0 -columnspan 10 -sticky w
   grid .myFrame.myVsFrame.myVsLbl       -row 0 -column 0
@@ -537,8 +570,8 @@ if { "$::tcl_platform(os)" != "Darwin" } {
 grid .myFrame.myChecks.myZLibCheck     -row $aCheckRowIter -column 6 -sticky e
 grid .myFrame.myChecks.myZLibLbl       -row $aCheckRowIter -column 7 -sticky w
 
-grid .myFrame.myChecks.myQt4Check      -row $aCheckRowIter -column 10 -sticky e
-grid .myFrame.myChecks.myQt4Lbl        -row $aCheckRowIter -column 11 -sticky w
+grid .myFrame.myChecks.myQt4Check      -row $aCheckRowIter -column 12 -sticky e
+grid .myFrame.myChecks.myQt4Lbl        -row $aCheckRowIter -column 13 -sticky w
 
 incr aCheckRowIter
 grid .myFrame.myChecks.myFFmpegCheck   -row $aCheckRowIter -column 0 -sticky e
@@ -551,8 +584,8 @@ if { "$::tcl_platform(platform)" == "windows" } {
 }
 grid .myFrame.myChecks.myLzmaCheck     -row $aCheckRowIter -column 6 -sticky e
 grid .myFrame.myChecks.myLzmaLbl       -row $aCheckRowIter -column 7 -sticky w
-grid .myFrame.myChecks.myJDKCheck      -row $aCheckRowIter -column 10 -sticky e
-grid .myFrame.myChecks.myJDKLbl        -row $aCheckRowIter -column 11 -sticky w
+grid .myFrame.myChecks.myJDKCheck      -row $aCheckRowIter -column 12 -sticky e
+grid .myFrame.myChecks.myJDKLbl        -row $aCheckRowIter -column 13 -sticky w
 
 incr aCheckRowIter
 if { "$::tcl_platform(os)" == "Darwin" } {
@@ -561,6 +594,10 @@ if { "$::tcl_platform(os)" == "Darwin" } {
   incr aCheckRowIter
 }
 
+grid .myFrame.myChecks.myRapidJsonCheck -row $aCheckRowIter -column 6 -sticky e
+grid .myFrame.myChecks.myRapidJsonLbl   -row $aCheckRowIter -column 7 -sticky w
+incr aCheckRowIter
+
 # Additional headers search paths
 grid .myFrame.myIncLbl    -row $aRowIter -column 0 -columnspan 10 -sticky w
 incr aRowIter
@@ -592,6 +629,9 @@ grid .myFrame.mySave  -row $aRowIter -column 4 -columnspan 2
 grid .myFrame.myClose -row $aRowIter -column 6 -columnspan 2
 
 # Bind events
+bind .myFrame.myPrjFrame.myPrjCombo <<ComboboxSelected>> {
+  wokdep:gui:SwitchConfig
+}
 bind .myFrame.myVsFrame.myVsCombo <<ComboboxSelected>> {
   wokdep:gui:SwitchConfig
 }

adm/genconfdeps.tcl

@@ -27,8 +27,10 @@ if { "$tcl_platform(platform)" == "unix" } {
   set SYS_EXE_SUFFIX    ""
   if { "$tcl_platform(os)" == "Darwin" } {
     set SYS_LIB_SUFFIX "dylib"
+    set PRJFMT "xcd"
   } else {
     set SYS_LIB_SUFFIX "so"
+    set PRJFMT "cbp"
   }
   set VCVER "gcc"
   set VCVARS ""
@@ -39,6 +41,7 @@ if { "$tcl_platform(platform)" == "unix" } {
   set SYS_EXE_SUFFIX    ".exe"
   set VCVER  "vc10"
   set VCVARS ""
+  set PRJFMT "vcxproj"
 }
 
 set SHORTCUT_HEADERS "ShortCut"
@@ -65,7 +68,7 @@ if { [info exists ::env(SHORTCUT_HEADERS)] } {
 }
 
 # fetch environment variables (e.g. set by custom.sh or custom.bat) and set them as tcl variables with the same name
-set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_ZLIB HAVE_LIBLZMA HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
+set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_ZLIB HAVE_LIBLZMA HAVE_RAPIDJSON HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
 foreach anEnvIter $THE_ENV_VARIABLES {
   set ${anEnvIter} "false"
   if { [info exists ::env(${anEnvIter})] } {
@@ -82,7 +85,7 @@ if { "$tcl_platform(platform)" != "windows" } {
   set HAVE_D3D ""
   set HAVE_RelWithDebInfo ""
 }
-foreach anEnvIter {ARCH VCVER VCVARS PRODUCTS_PATH} {
+foreach anEnvIter {ARCH VCVER VCVARS PRJFMT PRODUCTS_PATH} {
   if { [info exists ::env(${anEnvIter})] } {
     set ${anEnvIter} "$::env(${anEnvIter})"
   }
@@ -855,6 +858,25 @@ proc wokdep:SearchGLES {theErrInc theErrLib32 theErrLib64 theErrBin32 theErrBin6
   return "$isFound"
 }
 
+# Search RapidJSON headers
+proc wokdep:SearchRapidJson {theErrInc theErrLib32 theErrLib64 theErrBin32 theErrBin64} {
+  upvar $theErrInc anErrInc
+
+  set isFound "true"
+  set aRJHPath [wokdep:SearchHeader "rapidjson/rapidjson.h"]
+  if { "$aRJHPath"  == "" } {
+    set aPath [wokdep:Preferred [glob -nocomplain -directory "$::PRODUCTS_PATH" -type d *{rapidjson}*] "$::VCVER" "$::ARCH" ]
+    if { "$aPath" != "" && [file exists "$aPath/include/rapidjson/rapidjson.h"] } {
+      lappend ::CSF_OPT_INC "$aPath/include"
+    } else {
+      lappend anErrInc "Error: 'rapidjson/rapidjson.h' not found (RapidJSON)"
+      set isFound "false"
+    }
+  }
+
+  return "$isFound"
+}
+
 # Auxiliary function, gets VTK version to set default search directory
 proc wokdep:VtkVersion { thePath } {
   set aResult "6.1"
@@ -1118,15 +1140,33 @@ proc wokdep:SearchX11 {theErrInc theErrLib32 theErrLib64 theErrBin32 theErrBin64
   return "$isFound"
 }
 
+# Returns OCCT version string from file Standard_Version.hxx (if available)
+proc wokdep:DetectCasVersion {} {
+  set occt_ver 7.0.0
+  set aCasRoot [file normalize [file dirname [info script]]]
+  set filename "${aCasRoot}/src/Standard/Standard_Version.hxx"
+  if { [file exists $filename] } {
+    set fh [open $filename "r"]
+    set fh_loaded [read $fh]
+    close $fh
+    regexp {[^/]\s*#\s*define\s+OCC_VERSION_COMPLETE\s+\"([^\s]*)\"} $fh_loaded dummy occt_ver
+  } else {
+    puts "Error: file '$filename' not found"
+  }
+  return $occt_ver
+}
+
 # Generate (override) custom environment file
 proc wokdep:SaveCustom {} {
+  set aGenInfo "This environment file was generated by genconf.tcl script at [clock format [clock seconds] -format "%Y.%m.%d %H:%M"]"
   if { "$::tcl_platform(platform)" == "windows" } {
     set aCustomFilePath "./custom.bat"
     set aFile [open $aCustomFilePath "w"]
     puts $aFile "@echo off"
-    puts $aFile "rem This environment file was generated by wok_depsgui.tcl script at [clock format [clock seconds] -format "%Y.%m.%d %H:%M"]"
+    puts $aFile "rem $aGenInfo"
 
     puts $aFile ""
+    puts $aFile "set PRJFMT=$::PRJFMT"
     puts $aFile "set VCVER=$::VCVER"
     puts $aFile "set ARCH=$::ARCH"
     puts $aFile "set VCVARS=$::VCVARS"
@@ -1146,26 +1186,41 @@ proc wokdep:SaveCustom {} {
     }
 
     set aStringInc [join $::CSF_OPT_INC $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringInc [regsub -all "$::PRODUCTS_PATH" $aStringInc "%PRODUCTS_PATH%"]
+    }
     puts $aFile ""
     puts $aFile "rem Additional headers search paths"
     puts $aFile "set \"CSF_OPT_INC=$aStringInc\""
 
     set aStringLib32 [join $::CSF_OPT_LIB32 $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringLib32 [regsub -all "$::PRODUCTS_PATH" $aStringLib32 "%PRODUCTS_PATH%"]
+    }
     puts $aFile ""
     puts $aFile "rem Additional libraries (32-bit) search paths"
     puts $aFile "set \"CSF_OPT_LIB32=$aStringLib32\""
 
     set aStringLib64 [join $::CSF_OPT_LIB64 $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringLib64 [regsub -all "$::PRODUCTS_PATH" $aStringLib64 "%PRODUCTS_PATH%"]
+    }
     puts $aFile ""
     puts $aFile "rem Additional libraries (64-bit) search paths"
     puts $aFile "set \"CSF_OPT_LIB64=$aStringLib64\""
 
     set aStringBin32 [join $::CSF_OPT_BIN32 $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringBin32 [regsub -all "$::PRODUCTS_PATH" $aStringBin32 "%PRODUCTS_PATH%"]
+    }
     puts $aFile ""
     puts $aFile "rem Additional (32-bit) search paths"
     puts $aFile "set \"CSF_OPT_BIN32=$aStringBin32\""
 
     set aStringBin64 [join $::CSF_OPT_BIN64 $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringBin64 [regsub -all "$::PRODUCTS_PATH" $aStringBin64 "%PRODUCTS_PATH%"]
+    }
     puts $aFile ""
     puts $aFile "rem Additional (64-bit) search paths"
     puts $aFile "set \"CSF_OPT_BIN64=$aStringBin64\""
@@ -1175,9 +1230,10 @@ proc wokdep:SaveCustom {} {
     set aCustomFilePath "./custom.sh"
     set aFile [open $aCustomFilePath "w"]
     puts $aFile "#!/bin/bash"
-    puts $aFile "# This environment file was generated by wok_depsgui.tcl script at [clock format [clock seconds] -format "%Y.%m.%d %H:%M"]"
+    puts $aFile "# $aGenInfo"
 
     puts $aFile ""
+    puts $aFile "export PRJFMT=$::PRJFMT"
     puts $aFile "export ARCH=$::ARCH"
     puts $aFile "export SHORTCUT_HEADERS=$::SHORTCUT_HEADERS"
 
@@ -1195,22 +1251,88 @@ proc wokdep:SaveCustom {} {
     }
 
     set aStringInc [join $::CSF_OPT_INC $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringInc [regsub -all "$::PRODUCTS_PATH" $aStringInc "\${PRODUCTS_PATH}"]
+    }
     puts $aFile ""
     puts $aFile "# Additional headers search paths"
     puts $aFile "export CSF_OPT_INC=\"$aStringInc\""
 
-    set aStringLib$::ARCH [join [set ::CSF_OPT_LIB$::ARCH] $::SYS_PATH_SPLITTER]
+    set aStringLib [join [set ::CSF_OPT_LIB$::ARCH] $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringLib [regsub -all "$::PRODUCTS_PATH" $aStringLib "\${PRODUCTS_PATH}"]
+    }
     puts $aFile ""
     puts $aFile "# Additional libraries ($::ARCH-bit) search paths"
-    puts $aFile "export CSF_OPT_LIB$::ARCH=\"[set aStringLib$::ARCH]\""
+    puts $aFile "export CSF_OPT_LIB$::ARCH=\"[set aStringLib]\""
 
-    set aStringBin$::ARCH [join [set ::CSF_OPT_BIN$::ARCH] $::SYS_PATH_SPLITTER]
+    set aStringBin [join [set ::CSF_OPT_BIN$::ARCH] $::SYS_PATH_SPLITTER]
+    if { "$::PRODUCTS_PATH" != "" } {
+      set aStringBin [regsub -all "$::PRODUCTS_PATH" $aStringBin "\${PRODUCTS_PATH}"]
+    }
     puts $aFile ""
     puts $aFile "# Additional ($::ARCH-bit) search paths"
-    puts $aFile "export CSF_OPT_BIN$::ARCH=\"[set aStringBin$::ARCH]\""
+    puts $aFile "export CSF_OPT_BIN$::ARCH=\"[set aStringBin]\""
 
     close $aFile
   }
-
   puts "Configuration saved to file '$aCustomFilePath'"
+
+  # generate custom.auto.pri
+  set toExportCustomPri 1
+  if { $toExportCustomPri == 1 } {
+    set aCasVer [wokdep:DetectCasVersion]
+    set aCustomFilePath "./adm/qmake/custom.auto.pri"
+    set aFile [open $aCustomFilePath "w"]
+    puts $aFile "# $aGenInfo"
+
+    puts $aFile ""
+    puts $aFile "VERSION=$aCasVer"
+    puts $aFile "PRODUCTS_PATH=\"$::PRODUCTS_PATH\""
+
+    puts $aFile ""
+    puts $aFile "# Optional 3rd-parties switches"
+    foreach anEnvIter $::THE_ENV_VARIABLES {
+      set aName ${anEnvIter}
+      set aValue [set ::${anEnvIter}]
+      if { "$aValue" == "true" } {
+        puts $aFile "CONFIG += ${aName}"
+      } else {
+        #puts $aFile "CONFIG -= ${aName}"
+      }
+    }
+
+    puts $aFile ""
+    puts $aFile "# Additional headers search paths"
+    foreach anIncPath $::CSF_OPT_INC {
+      if { "$::PRODUCTS_PATH" != "" } {
+        set anIncPath [regsub -all "$::PRODUCTS_PATH" $anIncPath "\$\$\{PRODUCTS_PATH\}"]
+      }
+      puts $aFile "INCLUDEPATH += \"${anIncPath}\""
+    }
+
+    puts $aFile ""
+    puts $aFile "# Additional libraries search paths"
+    foreach aLibPath [set ::CSF_OPT_LIB$::ARCH] {
+      if { "$::PRODUCTS_PATH" != "" } {
+        set aLibPath [regsub -all "$::PRODUCTS_PATH" $aLibPath "\$\$\{PRODUCTS_PATH\}"]
+      }
+      puts $aFile "LIBS += -L\"${aLibPath}\""
+    }
+
+    if { "$::tcl_platform(platform)" == "windows" } {
+      puts $aFile ""
+      puts $aFile "# Additional DLLs search paths"
+      foreach aDllPath [set ::CSF_OPT_BIN$::ARCH] {
+        if { "$::PRODUCTS_PATH" != "" } {
+          set aDllPath [regsub -all "$::PRODUCTS_PATH" $aDllPath "\$\$\{PRODUCTS_PATH\}"]
+        }
+        puts $aFile "LIBS += -L\"${aDllPath}\""
+      }
+    }
+
+    puts $aFile ""
+    close $aFile
+    puts "Configuration saved to file '$aCustomFilePath'"
+  }
 }

adm/genproj.tcl

@@ -256,7 +256,7 @@ proc genAllResources {} {
 
 # Wrapper-function to generate VS project files
 proc genproj {theFormat args} {
-  set aSupportedFormats { "vc7" "vc8" "vc9" "vc10" "vc11" "vc12" "vc14" "vc141" "cbp" "xcd"}
+  set aSupportedFormats { "vc7" "vc8" "vc9" "vc10" "vc11" "vc12" "vc14" "vc141" "cbp" "xcd" "pro"}
   set aSupportedPlatforms { "wnt" "uwp" "lin" "mac" "ios" "qnx" }
   set isHelpRequire false
 
@@ -314,6 +314,7 @@ proc genproj {theFormat args} {
       vc141    -  Visual Studio 2017
       cbp      -  CodeBlocks
       xcd      -  XCode
+      pro      -  Qt Creator
 
     Platform (optional):
       wnt   -  Windows Desktop
@@ -395,9 +396,14 @@ proc genprojbat {theFormat thePlatform} {
       "cbp"   {
         file copy -force -- "$::THE_CASROOT/adm/templates/codeblocks.sh"  "$::path/codeblocks.sh"
         file copy -force -- "$::THE_CASROOT/adm/templates/codeblocks.bat" "$::path/codeblocks.bat"
+
         # Code::Blocks 16.01 does not create directory for import libs, help him
-        file mkdir "$::path/$thePlatform/cbp/lib"
-        file mkdir "$::path/$thePlatform/cbp/libd"
+        set aPlatformAndCompiler "${thePlatform}/gcc"
+        if { "$thePlatform" == "mac" || "$thePlatform" == "ios" } {
+          set aPlatformAndCompiler "${thePlatform}/clang"
+        }
+        file mkdir "$::path/${aPlatformAndCompiler}/lib"
+        file mkdir "$::path/${aPlatformAndCompiler}/libd"
       }
       "xcd"   { file copy -force -- "$::THE_CASROOT/adm/templates/xcode.sh"      "$::path/xcode.sh" }
     }
@@ -472,15 +478,6 @@ proc OS:MKPRC { theOutDir theFormat theLibType thePlatform theCmpl } {
     }
   }
 
-  # generate one solution for all projects if complete OS or VAS is processed
-  set anAllSolution "OCCT"
-
-  wokUtils:FILES:mkdir $anOutDir
-  if { ![file exists $anOutDir] } {
-    puts stderr "Error: Could not create output directory \"$anOutDir\""
-    return
-  }
-
   # create the out dir if it does not exist
   if (![file isdirectory $path/inc]) {
     puts "$path/inc folder does not exists and will be created"
@@ -491,6 +488,19 @@ proc OS:MKPRC { theOutDir theFormat theLibType thePlatform theCmpl } {
   puts "Collecting required header files into $path/inc ..."
   osutils:collectinc $aModules $path/inc
 
+  if { "$theFormat" == "pro" } {
+    return
+  }
+
+  # generate one solution for all projects if complete OS or VAS is processed
+  set anAllSolution "OCCT"
+
+  wokUtils:FILES:mkdir $anOutDir
+  if { ![file exists $anOutDir] } {
+    puts stderr "Error: Could not create output directory \"$anOutDir\""
+    return
+  }
+
   # Generating project files for the selected format
   switch -exact -- "$theFormat" {
     "vc7"   -
@@ -1349,6 +1359,7 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
     set aLibsMap(CSF_opengl32)     "opengl32"
     set aLibsMap(CSF_wsock32)      "wsock32"
     set aLibsMap(CSF_netapi32)     "netapi32"
+    set aLibsMap(CSF_winmm)        "winmm"
     set aLibsMap(CSF_OpenGlLibs)   "opengl32"
     if { "$::HAVE_GLES2" == "true" } {
       set aLibsMap(CSF_OpenGlLibs) "libEGL libGLESv2"
@@ -1366,17 +1377,23 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
     set aLibsMap(CSF_TBB) ""
   } else {
     set aLibsMap(CSF_dl)           "dl"
-    if { "$theOS" == "mac" } {
+    if { "$theOS" == "mac" || "$theOS" == "ios" } {
       set aLibsMap(CSF_objc)       "objc"
-      set aFrmsMap(CSF_Appkit)     "AppKit"
+      if { "$theOS" == "ios" } {
+        set aFrmsMap(CSF_Appkit)     "UIKit"
+        set aFrmsMap(CSF_OpenGlLibs) "OpenGLES"
+      } else {
+        set aFrmsMap(CSF_Appkit)     "AppKit"
+        set aFrmsMap(CSF_OpenGlLibs) "OpenGL"
+      }
       set aFrmsMap(CSF_IOKit)      "IOKit"
-      set aFrmsMap(CSF_OpenGlLibs) "OpenGL"
       set aFrmsMap(CSF_TclLibs)    "Tcl"
       set aLibsMap(CSF_TclLibs)    ""
       set aFrmsMap(CSF_TclTkLibs)  "Tk"
       set aLibsMap(CSF_TclTkLibs)  ""
       set aLibsMap(CSF_QT)         "QtCore QtGui"
     } else {
+      set aLibsMap(CSF_fontconfig) "fontconfig"
       if { "$theOS" == "qnx" } {
         # CSF_ThreadLibs - pthread API is part of libc on QNX
         set aLibsMap(CSF_OpenGlLibs) "EGL GLESv2"
@@ -2295,6 +2312,10 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
   set aCmplFlagsDebug   [list]
   set toPassArgsByFile 0
   set aLibPrefix "lib"
+  set aPlatformAndCompiler "${thePlatform}/gcc"
+  if { "$thePlatform" == "mac" || "$thePlatform" == "ios" } {
+    set aPlatformAndCompiler "${thePlatform}/clang"
+  }
   if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" || "$thePlatform" == "qnx" } {
     set toPassArgsByFile 1
   }
@@ -2351,17 +2372,17 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
   # Release target configuration
   puts $aFile "\t\t\t<Target title=\"Release\">"
   if { "$theIsExe" == "true" } {
-    puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bin/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
+    puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bin/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
     puts $aFile "\t\t\t\t<Option type=\"1\" />"
   } else {
     if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bin/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${thePlatform}/cbp/lib/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bin/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${aPlatformAndCompiler}/lib/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
     } else {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/lib/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/lib/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
     }
     puts $aFile "\t\t\t\t<Option type=\"3\" />"
   }
-  puts $aFile "\t\t\t\t<Option object_output=\"../../../${thePlatform}/cbp/obj\" />"
+  puts $aFile "\t\t\t\t<Option object_output=\"../../../${aPlatformAndCompiler}/obj\" />"
   puts $aFile "\t\t\t\t<Option compiler=\"$aCmplCbp\" />"
   puts $aFile "\t\t\t\t<Option createDefFile=\"0\" />"
   if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
@@ -2384,7 +2405,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
   if { $toPassArgsByFile == 1 } {
     puts $aFile "\t\t\t\t\t<Add option=\"\@$aLnkFileName\" />"
   }
-  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${thePlatform}/cbp/lib\" />"
+  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${aPlatformAndCompiler}/lib\" />"
   if { "$thePlatform" == "mac" } {
     if { [ lsearch $theLibsList X11 ] >= 0} {
       puts $aFile "\t\t\t\t\t<Add directory=\"/usr/X11/lib\" />"
@@ -2392,7 +2413,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
   }
   puts $aFile "\t\t\t\t\t<Add option=\"\$(CSF_OPT_LNK${aWokArch})\" />"
   if { "$thePlatform" == "lin" } {
-    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${thePlatform}/cbp/lib\" />"
+    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${aPlatformAndCompiler}/lib\" />"
   }
   puts $aFile "\t\t\t\t</Linker>"
 
@@ -2401,17 +2422,17 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
   # Debug target configuration
   puts $aFile "\t\t\t<Target title=\"Debug\">"
   if { "$theIsExe" == "true" } {
-    puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bind/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
+    puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bind/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
     puts $aFile "\t\t\t\t<Option type=\"1\" />"
   } else {
     if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bind/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${thePlatform}/cbp/libd/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bind/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${aPlatformAndCompiler}/libd/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
     } else {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/libd/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/libd/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
     }
     puts $aFile "\t\t\t\t<Option type=\"3\" />"
   }
-  puts $aFile "\t\t\t\t<Option object_output=\"../../../${thePlatform}/cbp/objd\" />"
+  puts $aFile "\t\t\t\t<Option object_output=\"../../../${aPlatformAndCompiler}/objd\" />"
   puts $aFile "\t\t\t\t<Option compiler=\"$aCmplCbp\" />"
   puts $aFile "\t\t\t\t<Option createDefFile=\"0\" />"
   if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
@@ -2434,7 +2455,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
   if { $toPassArgsByFile == 1 } {
     puts $aFile "\t\t\t\t\t<Add option=\"\@$aLnkDebFileName\" />"
   }
-  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${thePlatform}/cbp/libd\" />"
+  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${aPlatformAndCompiler}/libd\" />"
   if { "$thePlatform" == "mac" } {
     if { [ lsearch $theLibsList X11 ] >= 0} {
       puts $aFile "\t\t\t\t\t<Add directory=\"/usr/X11/lib\" />"
@@ -2442,7 +2463,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
   }
   puts $aFile "\t\t\t\t\t<Add option=\"\$(CSF_OPT_LNK${aWokArch}D)\" />"
   if { "$thePlatform" == "lin" } {
-    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${thePlatform}/cbp/libd\" />"
+    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${aPlatformAndCompiler}/libd\" />"
   }
   puts $aFile "\t\t\t\t</Linker>"
 
@@ -2509,8 +2530,8 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
       puts $aFile "\t\t\t<Option link=\"0\" />"
       puts $aFile "\t\t</Unit>"
 
-      set aFileObj  [string map {.cxx .o} [string map [list "/src/" "/$thePlatform/cbp/obj/src/"]  $aSrcFile]]
-      set aFileObjd [string map {.cxx .o} [string map [list "/src/" "/$thePlatform/cbp/objd/src/"] $aSrcFile]]
+      set aFileObj  [string map {.cxx .o} [string map [list "/src/" "/${aPlatformAndCompiler}/obj/src/"]  $aSrcFile]]
+      set aFileObjd [string map {.cxx .o} [string map [list "/src/" "/${aPlatformAndCompiler}/objd/src/"] $aSrcFile]]
       puts -nonewline $aFileLnkObj  "$aFileObj "
       puts -nonewline $aFileLnkObjd "$aFileObjd "
     } else {
@@ -2655,7 +2676,7 @@ proc OS:xcodeproj { theModules theOutDir theGuidsMap theLibType thePlatform} {
 }
 
 # Generates dependencies section for Xcode project files.
-proc osutils:xcdtk:deps {theToolKit theTargetType theGuidsMap theFileRefSection theDepsGuids theDepsRefGuids theIsStatic} {
+proc osutils:xcdtk:deps {theToolKit theTargetType theGuidsMap theFileRefSection theDepsGuids theDepsRefGuids thePlatform theIsStatic} {
   upvar $theGuidsMap         aGuidsMap
   upvar $theFileRefSection   aFileRefSection
   upvar $theDepsGuids        aDepsGuids
@@ -2679,7 +2700,7 @@ proc osutils:xcdtk:deps {theToolKit theTargetType theGuidsMap theFileRefSection
     }
   }
 
-  osutils:usedOsLibs $theToolKit "mac" aLibs aFrameworks
+  osutils:usedOsLibs $theToolKit $thePlatform aLibs aFrameworks
   set aUsedLibs [concat $aUsedLibs $aLibs]
   set aUsedLibs [concat $aUsedLibs $aFrameworks]
   foreach tkx $aUsedLibs {
@@ -2894,7 +2915,7 @@ proc osutils:xcdtk { theOutDir theToolKit theGuidsMap theIsStatic thePlatform {t
   }
 
   puts $aPbxprojFile [osutils:xcdtk:sources $theToolKit $theTargetType aSrcFileRefSection aGroupSection aPackagesGuids aSrcFileGuids aGuidsMap anIncPaths]
-  puts $aPbxprojFile [osutils:xcdtk:deps    $theToolKit $theTargetType aGuidsMap aDepsFileRefSection aDepsGuids aDepsRefGuids $theIsStatic]
+  puts $aPbxprojFile [osutils:xcdtk:deps    $theToolKit $theTargetType aGuidsMap aDepsFileRefSection aDepsGuids aDepsRefGuids $thePlatform $theIsStatic]
   # End PBXBuildFile section
 
   # Begin PBXFileReference section

adm/qmake/.gitignore

@@ -0,0 +1,5 @@
+/*/*.pro
+/*/*/*.pro
+*.pro.user
+custom.pri
+custom.auto.pri

adm/qmake/OccCppConfig.pri

@@ -0,0 +1,157 @@
+# This is project defines C++ compilation rules for building an OCCT Toolkit.
+
+exists(custom.auto.pri) { include(custom.auto.pri) }
+exists(custom.pri)      { include(custom.pri) }
+
+# Disable some dummy Qt defaults
+QT -= core gui
+CONFIG -= qt app_bundle
+CONFIG -= qml_debug
+CONFIG -= debug_and_release
+
+OccGitRoot = $$_PRO_FILE_PWD_/../../../..
+
+# Define compilation flags
+CONFIG += warn_on
+QMAKE_CFLAGS_WARN_ON   = -Wall
+QMAKE_CXXFLAGS_WARN_ON = -Wall
+win32 {
+  QMAKE_CFLAGS_WARN_ON   = -W4
+  QMAKE_CXXFLAGS_WARN_ON = -W4
+  QMAKE_CXXFLAGS_EXCEPTIONS_ON = /EHa
+  QMAKE_CXXFLAGS_STL_ON = /EHa
+
+  QMAKE_CXXFLAGS += -fp:precise
+  #QMAKE_CXXFLAGS -= -Zc:throwingNew
+  #QMAKE_CXXFLAGS -= -Zc:rvalueCast
+
+  QMAKE_LFLAGS += -INCREMENTAL:NO
+
+  CONFIG(debug, debug|release) {
+    QMAKE_CXXFLAGS += -Od
+    QMAKE_CXXFLAGS += -Ob1
+  }
+
+  DEFINES -= WIN32
+  DEFINES -= WIN64
+  DEFINES += _CRT_SECURE_NO_WARNINGS
+  DEFINES += _CRT_NONSTDC_NO_DEPRECATE
+  DEFINES += _SCL_SECURE_NO_WARNINGS
+} else {
+  CONFIG += c++11
+  QMAKE_CFLAGS   += -fexceptions
+  QMAKE_CXXFLAGS += -fexceptions
+  QMAKE_CXXFLAGS += -fvisibility=default
+  DEFINES += OCC_CONVERT_SIGNALS
+  mac {
+    iphoneos {
+      QMAKE_IOS_DEPLOYMENT_TARGET = 8.0
+    } else {
+      QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.14
+    }
+  }
+}
+!CONFIG(debug, debug|release) {
+  # disable exceptions in Release builds
+  DEFINES += No_Exception
+  HAVE_RelWithDebInfo {
+    win32 {
+      CONFIG += force_debug_info
+    }
+  }
+}
+
+# Define output folder depending on compiler name
+MY_BITNESS = 32
+
+equals(QMAKE_TARGET.arch, x86_64) | equals(QMAKE_HOST.arch, x86_64) { MY_BITNESS = 64 }
+equals(ANDROID_TARGET_ARCH, arm64-v8a) { MY_BITNESS = 64 }
+has64Target = $$find(QMAKE_TARGET.arch, "x64")
+count(has64Target, 1) { MY_BITNESS = 64 }
+
+MY_PLATFORM = platform
+CONFIG(iphonesimulator, iphoneos|iphonesimulator) { MY_PLATFORM = iphonesimulator
+} else:CONFIG(iphoneos, iphoneos|iphonesimulator) { MY_PLATFORM = iphoneos
+} else:android { MY_PLATFORM = android-$$ANDROID_TARGET_ARCH
+} else:win32   { MY_PLATFORM = win$$MY_BITNESS
+} else:mac     { MY_PLATFORM = mac
+} else:linux   { MY_PLATFORM = lin
+} else:unix    { MY_PLATFORM = unix
+} else { warning (Unknown platform. "$$MY_PLATFORM" is used) }
+
+MY_COMPILER = compiler
+MY_VC_VER = 0
+android-g++ {
+  MY_COMPILER = gcc
+} else:clang {
+  MY_COMPILER = clang
+} else:gcc {
+  MY_COMPILER = gcc
+} else:win32-msvc2010 {
+  MY_COMPILER = vc10
+  MY_VC_VER = 10
+} else:win32-msvc2012 {
+  MY_COMPILER = vc11
+  MY_VC_VER = 11
+} else:win32-msvc2013 {
+  MY_COMPILER = vc12
+  MY_VC_VER = 12
+} else:win32-msvc2015 {
+  MY_COMPILER = vc14
+  MY_VC_VER = 14
+} else:win32-msvc2017 {
+  MY_COMPILER = vc14
+  MY_VC_VER = 14
+} else:win32-msvc {
+  MY_COMPILER = vc14
+  MY_VC_VER = 14
+  aMsvcVer = $$(VisualStudioVersion)
+  equals(aMsvcVer, 14.0){
+    # VS2015, vc140
+  } else:equals(aMsvcVer, 15.0){
+    # VS2015, vc141
+  } else:equals(aMsvcVer, 16.0){
+    # VS2019, vc142
+  } else {
+    warning (Unknown msvc version. "$$MY_COMPILER" is used)
+  }
+} else {
+  warning (Unknown compiler. "$$MY_COMPILER" is used)
+}
+MY_PLATFORM_AND_COMPILER = $$MY_PLATFORM/$$MY_COMPILER
+#warning (The platform is "$$MY_PLATFORM"; bitness is "$$MY_BITNESS"; compiler is "$$MY_COMPILER")
+
+CONFIG(debug, debug|release) { MY_BUILDTYPE = d }
+
+DESTDIR = $$OccGitRoot/$${MY_PLATFORM_AND_COMPILER}/lib$${MY_BUILDTYPE}
+win32 {
+  DESTDIR  = $$OccGitRoot/win$${MY_BITNESS}/vc$${MY_VC_VER}/bin$${MY_BUILDTYPE}
+  aLibDest = $$DESTDIR/../lib$${MY_BUILDTYPE}
+  #DLLDESTDIR = $$DESTDIR/../bin$${MY_BUILDTYPE}
+
+  # dummy target creating lib/libd folder
+  occtkgen_libfolder.input  = $$_PRO_FILE_PWD_/../../OcctDummy.in
+  occtkgen_libfolder.output = $$aLibDest/dummy.tmp
+  occtkgen_libfolder.config = verbatim
+  QMAKE_SUBSTITUTES += occtkgen_libfolder
+
+  LIBS += -L$$aLibDest
+  equals(TEMPLATE, lib) {
+    QMAKE_CLEAN += $$DESTDIR/$${TARGET}.dll
+    QMAKE_CLEAN += $$aLibDest/$${TARGET}.lib
+    QMAKE_CLEAN += $$aLibDest/$${TARGET}.exp
+  } else {
+    QMAKE_CLEAN += $$DESTDIR/$${TARGET}.exe
+  }
+  QMAKE_CLEAN += $$DESTDIR/$${TARGET}.pdb
+  QMAKE_LFLAGS += -PDB:"$$DESTDIR/$${TARGET}.pdb"
+  QMAKE_LFLAGS += -IMPLIB:"$$aLibDest/$${TARGET}.lib"
+} else {
+  LIBS += -L$$DESTDIR
+  equals(TEMPLATE, app) {
+    DESTDIR = $$OccGitRoot/$${MY_PLATFORM_AND_COMPILER}/bin$${MY_BUILDTYPE}
+  }
+}
+
+#OBJECTS_DIR = $$DESTDIR/../obj$${MY_BUILDTYPE}/$${TARGET}
+OBJECTS_DIR = $$DESTDIR/../obj$${MY_BUILDTYPE}

adm/qmake/OccModule.pri

@@ -0,0 +1,36 @@
+# This is a project template file defining an OCCT Module.
+# This project should be included with predefined OCC_MODULE_NAME variable.
+TEMPLATE = subdirs
+exists(custom.auto.pri) { include(custom.auto.pri) }
+exists(custom.pri)      { include(custom.pri) }
+
+# Iterate over Toolkits within current Module and generate sub-project per Toolkit
+aModuleList = $$cat(../MODULES, lines)
+for (aModuleIter, aModuleList) {
+  #aTkList = $$list($$aModuleIter) - this doesn't work, qmake bug?
+  aModule = $$first($$list($$aModuleIter))
+  equals (aModule, $$OCC_MODULE_NAME) {
+    for (aToolKit, $$list($$aModuleIter)) {
+      toSkipToolkit = 0
+      equals (aToolKit, $$OCC_MODULE_NAME)      { toSkipToolkit = 1 }
+      !HAVE_VTK:equals (aToolKit, "TKIVtk")     { toSkipToolkit = 1 }
+      !HAVE_VTK:equals (aToolKit, "TKIVtkDraw") { toSkipToolkit = 1 }
+      !win32:   equals (aToolKit, "TKD3DHost")  { toSkipToolkit = 1 }
+      equals (toSkipToolkit, 0) {
+        #warning(aToolKit($$OCC_MODULE_NAME)=$$aToolKit)
+        eval(occtkgen_$${aToolKit}.input  = $$_PRO_FILE_PWD_/../OccToolkit.pro.in)
+        eval(occtkgen_$${aToolKit}.output = $$_PRO_FILE_PWD_/$${aToolKit}/$${aToolKit}.pro)
+        eval(occtkgen_$${aToolKit}.config = verbatim)
+        eval(QMAKE_SUBSTITUTES += occtkgen_$${aToolKit})
+        SUBDIRS += $${aToolKit}
+
+        aModExtList = $$cat(../../src/$${aToolKit}/EXTERNLIB, lines)
+        aTkDepends = $${aToolKit}.depends
+        for (aModExtIter, aModExtList) {
+          contains ($$list($$aModuleIter), $$aModExtIter) { eval ($${aTkDepends} += $$aModExtIter) }
+        }
+        #warning($$aToolKit depends on: $$reverse($${aTkDepends}))
+      }
+    }
+  }
+}

adm/qmake/OccModule.pro.in

@@ -0,0 +1,2 @@
+OCC_MODULE_NAME = \$\$TARGET
+include(../OccModule.pri)

adm/qmake/OccToolkit.pri

@@ -0,0 +1,144 @@
+# This is a project template file defining an OCCT Toolkit.
+# This project should be included with predefined OCC_TOOLKIT_NAME variable.
+
+TEMPLATE = lib
+!exists(../../src/$$OCC_TOOLKIT_NAME/PACKAGES) {
+  TEMPLATE = app
+  CONFIG += console
+}
+win32 {
+  # do not append version to DLL name
+  CONFIG += skip_target_version_ext
+}
+
+include(OccCppConfig.pri)
+
+aSrcRoot = $$OccGitRoot/src
+aHxxRoot = $$OccGitRoot/inc
+INCLUDEPATH += $$aHxxRoot
+
+# CSF variables
+CSF_FREETYPE  = -lfreetype
+CSF_TclLibs   = -ltcl8.6
+CSF_TclTkLibs = -ltk8.6
+HAVE_FREEIMAGE { CSF_FreeImagePlus = -lfreeimage } else:win32 { CSF_FreeImagePlus = -lwindowscodecs -lole32 }
+HAVE_FFMPEG    { CSF_FFmpeg = -lavcodec -lavformat -lswscale -lavutil }
+HAVE_TBB       { CSF_TBB = -ltbb -ltbbmalloc }
+HAVE_ZLIB      { CSF_ZLIB = -lzlib }
+HAVE_LIBLZMA   { CSF_LIBLZMA = -lliblzma }
+win32 {
+  CSF_kernel32   = -lkernel32
+  CSF_advapi32   = -ladvapi32
+  CSF_gdi32      = -lgdi32
+  CSF_user32     = -luser32 -lcomdlg32
+  CSF_shell32    = -lShell32
+  CSF_opengl32   = -lopengl32
+  CSF_wsock32    = -lwsock32
+  CSF_netapi32   = -lnetapi32
+  CSF_OpenGlLibs = -lopengl32
+  HAVE_GLES2 { CSF_OpenGlLibs = -llibEGL -llibGLESv2 }
+  CSF_psapi      = -lPsapi
+  CSF_winmm      = -lwinmm
+  CSF_d3d9       = -ld3d9
+  CSF_TclLibs    = -ltcl86
+  CSF_TclTkLibs  = -ltk86
+  CSF_TBB =
+} else:mac {
+  CSF_dl         = -ldl
+  CSF_objc       = -lobjc
+  iphoneos {
+    CSF_Appkit     = -framework UIKit
+    CSF_OpenGlLibs = -framework OpenGLES
+  } else {
+    CSF_Appkit     = -framework AppKit
+    CSF_OpenGlLibs = -framework OpenGL
+  }
+  CSF_IOKit      = -framework IOKit
+  CSF_TclLibs    = -framework Tcl
+  CSF_TclTkLibs  = -framework Tk
+} else {
+  CSF_dl = -ldl
+  CSF_ThreadLibs = -lpthread -lrt
+  CSF_OpenGlLibs = -lGL
+  CSF_TclTkLibs  = -lX11 -ltk8.6
+  CSF_XwLibs     = -lX11 -lXext -lXmu -lXi
+  CSF_MotifLibs  = -lX11
+  CSF_fontconfig = -lfontconfig
+  HAVE_GLES2 { CSF_OpenGlLibs = -lEGL -lGLESv2 }
+}
+
+for (aCfgIter, CONFIG) {
+  aRes = $$find(aCfgIter, "^HAVE_")
+  count(aRes, 1) {
+    DEFINES += $$aCfgIter
+  }
+}
+
+# Define the list of standard OCCT file extensions
+aHxxRegex = ^.*\.(hxx|h|lxx|gxx)$
+aPxxRegex = ^.*\.(pxx)$
+aCxxRegex = ^.*\.(cxx|c)$
+mac { aCxxRegex = ^.*\.(cxx|c|m|mm)$ }
+
+# Auxiliary function for probing file extension
+defineTest (occCheckExtension) {
+  aProbe = $$find(1, "$$2")
+  count(aProbe, 1) { return(true) } else { return(false) }
+}
+
+# Auxiliary function for probing compilable files
+defineTest (occIsCxxFile) { occCheckExtension ($$1, $$aCxxRegex) { return(true) } else { return(false) } }
+
+# Auxiliary function for probing header files
+defineTest (occIsHxxFile) { occCheckExtension ($$1, $$aHxxRegex) { return(true) } else { return(false) } }
+
+aTkFiles     = $$cat($$aSrcRoot/$$OCC_TOOLKIT_NAME/FILES,     lines)
+aTkFiles += CMakeLists.txt
+aPackages    = $$cat($$aSrcRoot/$$OCC_TOOLKIT_NAME/PACKAGES,  lines)
+anExternLibs = $$cat($$aSrcRoot/$$OCC_TOOLKIT_NAME/EXTERNLIB, lines)
+
+for (aTkFileIter, aTkFiles) { OTHER_FILES += $$aSrcRoot/$$OCC_TOOLKIT_NAME/$$aTkFileIter }
+for (anExternLib, anExternLibs) {
+  hasCsf = $$find(anExternLib, CSF_)
+  count(hasCsf, 1) {
+    aList = $$split($$anExternLib, "\n")
+    LIBS += $$aList
+  } else {
+    LIBS += -l$$anExternLib
+  }
+}
+
+# Iterate over Packages and add compilable files into this project
+isEmpty (aPackages) { aPackages = $$OCC_TOOLKIT_NAME }
+for (aPackage, aPackages) {
+  aPackageFolder = $$aSrcRoot/$$OCC_TOOLKIT_NAME/$$aPackage
+  aPackageFiles = $$cat($$aSrcRoot/$$aPackage/FILES, lines)
+  for (aFileIter, aPackageFiles) {
+    occIsCxxFile($$aFileIter) {
+      SOURCES += $$aSrcRoot/$$aPackage/$$aFileIter
+    }
+  }
+}
+
+# extend clean with versioned .so files
+!win32 {
+  aVerList = $$split(VERSION, ".")
+  aVerMaj = $$member(aVerList, 0)
+  aVerMin = $$member(aVerList, 1)
+  aVerMic = $$member(aVerList, 2)
+  equals(TEMPLATE, app) {
+    QMAKE_CLEAN += $$DESTDIR/$${TARGET}
+  } else {
+    mac {
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.dylib
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.dylib
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.$${aVerMin}.dylib
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.$${aVerMin}.$${aVerMic}.dylib
+    } else {
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}.$${aVerMin}
+      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}.$${aVerMin}.$${aVerMic}
+    }
+  }
+}

adm/qmake/OccToolkit.pro.in

@@ -0,0 +1,2 @@
+OCC_TOOLKIT_NAME = \$\$TARGET
+include(../../OccToolkit.pri)

adm/qmake/Occt.pro

@@ -0,0 +1,41 @@
+# This is an experimental Solution project for building entire OCCT framework using qmake.
+# It can be also used for just source code navigation in Qt Creator without actually building OCCT.
+# Note, as this is an experimental project, compiler flags might differ from official builds - use it on your own risk!
+# Building OCCT using CMake is a preferred solution.
+#
+# This project GENERATES sub-projects (OCCT modules) dynamically, so to start using it:
+# - Launch genconf, select Project Format "Qt Project" and configure dependencies; this will also generate "custom.auto.pri".
+# - Launch genproj to fill in "inc" folder with links to header files.
+# - Open project in Qt Creator, and call "Run qmake".
+# - Close the project in Qt Creator, open it again so that you should see the sub-modules in Project tree; call "Run qmake" again.
+# - "Run qmake" and perform Build.
+TEMPLATE = subdirs
+exists(custom.auto.pri) { include(custom.auto.pri) }
+exists(custom.pri)      { include(custom.pri) }
+
+OTHER_FILES += OccModule.pro.in \
+               OcctHeaderLink.hxx.in \
+               OccToolkit.pro.in \
+               OccCppConfig.pri \
+               OccModule.pri \
+               OccToolkit.pri \
+               custom.pri.template
+
+# Iterate over Modules and generate sub-projects
+aSolModuleList = $$cat(../MODULES, lines)
+for (aSolModuleIter, aSolModuleList) {
+  aSolModule = $$first($$list($$aSolModuleIter))
+  eval(occtkgen_$${aSolModule}.input  = $$_PRO_FILE_PWD_/OccModule.pro.in)
+  eval(occtkgen_$${aSolModule}.output = $$_PRO_FILE_PWD_/$${aSolModule}/$${aSolModule}.pro)
+  eval(occtkgen_$${aSolModule}.config = verbatim)
+  eval(QMAKE_SUBSTITUTES += occtkgen_$${aSolModule})
+  SUBDIRS += $${aSolModule}
+}
+
+# These dependencies are manually defined
+ModelingData.depends = FoundationClasses
+ModelingAlgorithms.depends = FoundationClasses ModelingData
+Visualization.depends = FoundationClasses ModelingData ModelingAlgorithms
+ApplicationFramework.depends = FoundationClasses ModelingData ModelingAlgorithms Visualization
+DataExchange.depends = FoundationClasses ModelingData ModelingAlgorithms ApplicationFramework
+Draw.depends = FoundationClasses ModelingData ModelingAlgorithms ApplicationFramework DataExchange Visualization

adm/qmake/OcctHeaderLink.hxx.in

@@ -0,0 +1 @@
+#include \"../src/$${OCCT_PACKAGE}/$${OCCT_HEADER}\"

adm/qmake/custom.pri.template

@@ -0,0 +1,17 @@
+PRODUCTS_PATH = c:/3rdparty/vc14
+
+#CONFIG += HAVE_FREEIMAGE
+#CONFIG += HAVE_FFMPEG
+#CONFIG += HAVE_TBB
+#CONFIG += HAVE_GLES2
+#CONFIG += HAVE_D3D
+#CONFIG += HAVE_VTK
+
+aFreeType = $$PRODUCTS_PATH/freetype-2.5.5-vc14-64
+aTclTk    = $$PRODUCTS_PATH/tcltk-86-64
+
+INCLUDEPATH += $$aFreeType/include
+LIBS        += -L$$aFreeType/lib
+
+INCLUDEPATH += $$aTclTk/include
+LIBS        += -L$$aTclTk/lib

adm/templates/env.bat

@@ -24,11 +24,13 @@ set "HAVE_GLES2=false"
 set "HAVE_D3D=false"
 set "HAVE_ZLIB=false"
 set "HAVE_LIBLZMA=false"
+set "HAVE_RAPIDJSON=false"
 set "CSF_OPT_INC="
 set "CSF_OPT_LIB32="
 set "CSF_OPT_LIB64="
 set "CSF_OPT_BIN32="
 set "CSF_OPT_BIN64="
+set "CSF_DEFINES=%CSF_DEFINES_EXTRA%"
 
 if not ["%CASROOT%"] == [""] if exist "%SCRIPTROOT%\%CASROOT%" set "CASROOT=%SCRIPTROOT%\%CASROOT%"
 if     ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
@@ -162,6 +164,7 @@ if ["%HAVE_GLES2%"]     == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DH
 if ["%HAVE_D3D%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_D3D"       & set "CSF_DEFINES=HAVE_D3D;%CSF_DEFINES%"
 if ["%HAVE_ZLIB%"]      == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_ZLIB"      & set "CSF_DEFINES=HAVE_ZLIB;%CSF_DEFINES%"
 if ["%HAVE_LIBLZMA%"]   == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_LIBLZMA"   & set "CSF_DEFINES=HAVE_LIBLZMA;%CSF_DEFINES%"
+if ["%HAVE_RAPIDJSON%"] == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_RAPIDJSON" & set "CSF_DEFINES=HAVE_RAPIDJSON;%CSF_DEFINES%"
 
 rem Eliminate VS warning
 if ["%CSF_DEFINES%"]  == [""] set "CSF_DEFINES=;"

adm/templates/env.sh

@@ -6,7 +6,7 @@ aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath
 # Reset values
 export CASROOT="__CASROOT__"
 export CASDEB=""
-export TARGET="";
+export PRJFMT="";
 export HAVE_TBB="false";
 export HAVE_OPENCL="false";
 export HAVE_FREEIMAGE="false";
@@ -40,9 +40,9 @@ do
   elif [ "$i" == "i" ] || [ "$i" == "relwithdeb" ]; then
     export CASDEB="i"
   elif [ "$i" == "cbp" ]; then
-    export TARGET="cbp";
+    export PRJFMT="cbp";
   elif [ "$i" == "xcd" ] || [ "$i" == "xcode" ]; then
-    export TARGET="xcd";
+    export PRJFMT="xcd";
   fi
 done
 shopt -u nocasematch
@@ -64,28 +64,32 @@ else
 fi
 
 export CASBIN=""
-if [ "${TARGET}" == "cbp" ]; then
-  export CASBIN="${WOKSTATION}/cbp"
-elif [ "${TARGET}" == "xcd" ]; then
+if [ "${PRJFMT}" == "xcd" ]; then
   export CASBIN="adm/mac/xcd/build"
+else
+  if [ "$aSystem" == "Darwin" ]; then
+    export CASBIN="${WOKSTATION}/clang"
+  else
+    export CASBIN="${WOKSTATION}/gcc"
+  fi
 fi
 
 export CSF_OPT_INC="${CSF_OPT_INC}:${CASROOT}/inc"
 
-if [ "${TARGET}" == "cbp" ]; then
-  export CSF_OPT_LIB32D="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/libd"
-  export CSF_OPT_LIB64D="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/libd"
-  export CSF_OPT_LIB32="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/lib"
-  export CSF_OPT_LIB64="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/lib"
-  export CSF_OPT_LIB32I="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/libi"
-  export CSF_OPT_LIB64I="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/libi"
-elif [ "${TARGET}" == "xcd" ]; then
+if [ "${PRJFMT}" == "xcd" ]; then
   export CSF_OPT_LIB32D="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/Debug"
   export CSF_OPT_LIB64D="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/Debug"
   export CSF_OPT_LIB32="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/Release"
   export CSF_OPT_LIB64="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/Release"
   export CSF_OPT_LIB32I="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/RelWithDebInfo"
   export CSF_OPT_LIB64I="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/RelWithDebInfo"
+else
+  export CSF_OPT_LIB32D="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/libd"
+  export CSF_OPT_LIB64D="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/libd"
+  export CSF_OPT_LIB32="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/lib"
+  export CSF_OPT_LIB64="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/lib"
+  export CSF_OPT_LIB32I="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/libi"
+  export CSF_OPT_LIB64I="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/libi"
 fi
 
 export CSF_OPT_CMPL=""
@@ -174,7 +178,7 @@ export CSF_OCCTSamplesPath="${CSF_OCCTSamplesPath:-$CASROOT/samples}"
 export CSF_OCCTDataPath="${CSF_OCCTDataPath:-$CASROOT/data}"
 export CSF_OCCTTestsPath="${CSF_OCCTTestsPath:-$CASROOT/tests}"
 
-if [ "${TARGET}" == "xcd" ]; then
+if [ "${PRJFMT}" == "xcd" ]; then
   if [ "${CASDEB}" == "d" ]; then
     export CSF_OCCTBinPath="${CSF_OCCTBinPath:-$CASROOT/$CASBIN/Debug}"
   else

dox/dev_guides/upgrade/upgrade.md

@@ -1716,9 +1716,48 @@ aGroup->SetPrimitivesAspect (myDrawer->LineAspect()->Aspect()); //!< next array
 aGroup->AddPrimitiveArray (aLines);
 ~~~~
 
+@subsection upgrade_740_prsupdate Presentation invalidation
+
+Historically AIS_InteractiveObject provided two independent mechanisms invalidating presentation (asking presentation manager to recompute specific display mode or all modes):
+
+1. *AIS_InteractiveObject::SetToUpdate()*, marking existing presentation for update.
+   This is main invalidation API, which is expected to be followed by *AIS_InteractiveContext::Update()* call.
+2. *AIS_InteractiveObject::myToRecomputeModes* + *myRecomputeEveryPrs*.
+   This is auxiliary invalidation API, used internally by AIS_InteractiveContext::SetColor()/UnsetColor() and similar modification methods.
+
+The latter one has been removed to avoid confusion and unexpected behavior.
+In addition, two methods *AIS_InteractiveObject::Update()* have been deprecated in favor of new *AIS_InteractiveObject::UpdatePresentations()* recomputing only invalidated presentations.
+
+Custom presentations implementing interface methods *AIS_InteractiveObject::SetColor()* and others should be revised to use *AIS_InteractiveObject::SetToUpdate()*
+or updating presentation without recomputation (see *AIS_InteractiveObject::SynchronizeAspects()* and *AIS_InteractiveObject::replaceAspects()*).
+
 @subsection upgrade_740_interiorstyles Interior styles
 
 * *Aspect_IS_HOLLOW* is now an alias to *Aspect_IS_EMPTY* and does not implicitly enables drawing mesh edges anymore.
   Specify Graphic3d_AspectFillArea3d::SetDrawEdges(true) with Graphic3d_AspectFillArea3d::SetInteriorStyle(Aspect_IS_EMPTY) to get previous behavior of Aspect_IS_HOLLOW style.
 * *Aspect_IS_HIDDENLINE* does not implicitly enables drawing mesh edges anymore.
   Specify Graphic3d_AspectFillArea3d::SetDrawEdges(true) with Graphic3d_AspectFillArea3d::SetInteriorStyle(Aspect_IS_HIDDENLINE) to get previous behavior of Aspect_IS_HIDDENLINE style.
+
+@subsection upgrade_740_modedprs PrsMgr and SelectMgr hierarchy clean up
+
+Proxy classes *Prs3d_Presentation*, *PrsMgr_ModedPresentation* and *PrsMgr_Prs* have been removed.
+Code iterating through the list of low-level structures AIS_InteractiveObject::Presentations() should be updated to access PrsMgr_Presentation directly.
+Forward declarations of *Prs3d_Presentation* should be corrected, since it is now a typedef to *Graphic3d_Structure*.
+
+Proxy classes *SelectBasics_SensitiveEntity* and *SelectBasics_EntityOwner* have been removed - *Select3D_SensitiveEntity* and *SelectMgr_EntityOwner* should be now used directly instead.
+
+@subsection upgrade_740_geproj Custom defines within env.bat
+
+*env.bat* produced by Visual Studio project generator *genproj.bat* has been modified so that *%CSF_DEFINES%* variable is reset to initial state.
+Custom building environment relying on old behavior and setting extra macros within *%CSF_DEFINES%* before env.bat should be updated
+to either modify custom.bat or setup new variable *%CSF_DEFINES_EXTRA%* instead.
+
+@subsection upgrade_740_BVH_in_BOP Switching Boolean Operations algorithm to use BVH tree instead of UB tree
+
+Since OCCT 7.4.0 Boolean Operations algorithm uses BVH tree instead of UBTree to find the pairs of entities with interfering bounding boxes.
+The following API changes have been made:
+* BOPTools_BoxBndTree and BOPTools_BoxBndTreeSelector have been removed. Use the BOPTools_BoxTree and BOPTools_BoxTreeSelector instead.
+* BOPTools_BoxSelector::SetBox() method now accepts the BVH_Box instead of Bnd_Box.
+* Methods BOPTools_BoxSelector::Reject and BOPTools_BoxSelector::Accept have been removed as unused.
+* The RunParallel flag has been removed from the list of parameters of BOPAlgo_Tools::IntersectVertices method. Earlier, it performed selection from the UB tree in parallel mode. Now all interfering pairs are found in one pass, using pair traverse of the same BVH tree.
+

dox/overview/overview.md

@@ -222,6 +222,7 @@ for which OCCT is certified to work.
 | Freetype (for text rendering) | FreeType 2.4.11-2.7.1 https://sourceforge.net/projects/freetype/files/ |
 | FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ https://sourceforge.net/projects/freeimage/files |
 | FFmpeg (optional, for video recording) | FFmpeg 3.1+ https://www.ffmpeg.org/download.html |
+| RapidJSON (optional, for reading glTF) | RapidJSON 1.1+ http://rapidjson.org/ |
 | Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x https://www.threadingbuildingblocks.org/ |
 | VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/download/ |
 | Doxygen (optional for building documentation) | Doxygen 1.8.5+ https://www.stack.nl/~dimitri/doxygen/download.html |

dox/resources/occt_rm.doxyfile

@@ -23,7 +23,7 @@ WARNINGS               = NO
 ENABLE_PREPROCESSING   = YES
 MACRO_EXPANSION        = YES
 EXPAND_ONLY_PREDEF     = YES
-PREDEFINED             = Standard_EXPORT Standard_NODISCARD Standard_OVERRIDE:=override __Standard_API __Draw_API Handle(a):=Handle<a> DEFINE_STANDARD_ALLOC DEFINE_NCOLLECTION_ALLOC
+PREDEFINED             = Standard_EXPORT Standard_NODISCARD Standard_OVERRIDE:=override __Standard_API __Draw_API Handle(a):=Handle<a> DEFINE_STANDARD_ALLOC DEFINE_NCOLLECTION_ALLOC "Standard_DEPRECATED=//! @deprecated "
 GENERATE_HTML          = YES
 GENERATE_LATEX         = NO
 SEARCH_INCLUDES        = YES

dox/user_guides/draw_test_harness/draw_test_harness.md

@@ -1,4 +1,4 @@
-Draw Test Harness  {#occt_user_guides__test_harness}
+Draw Test Harness  {#occt_user_guides__test_harness}
 ===============================
 
 @tableofcontents
@@ -5593,8 +5593,9 @@ Draw provides command to create curves and surfaces by approximation.
 
 * **2dapprox** fits a curve through 2d points; 
 * **appro** fits a curve through 3d points;
-* **surfapp** and **grilapp** fit a surface through 3d points;
-* **2dinterpolate** interpolates a curve. 
+* **surfapp** and **grilapp** fit a surface through 3d points by approximation;
+* **surfint** fit a surface through 3d points by interpolation;
+* **2dinterpole** interpolates a curve. 
 
 @subsubsection occt_draw_6_8_1   appro, dapprox
 
@@ -5614,17 +5615,28 @@ Let us pick points and they will be fitted
 2dapprox c 10 
 ~~~~~
 
-@subsubsection occt_draw_6_8_2  surfapp, grilapp
+@subsubsection occt_draw_6_8_2  surfapp, grilapp, surfint
 
 
 Syntax: 
 ~~~~~
 surfapp name nbupoints nbvpoints x y z .... 
+or
+surfapp name nbupoints nbvpoints surf [periodic_flag = 0]
 grilapp name nbupoints nbvpoints xo dx yo dy z11 z12 ... 
+surfint name surf nbupoints nbvpoints [periodic_flag = 0]
 ~~~~~
 
 * **surfapp** fits a surface through an array of u and v points, nbupoints*nbvpoints. 
 * **grilapp** has the same function, but the x,y coordinates of the points are on a grid starting at x0,y0 with steps dx,dy. 
+* **surfapp** can take array of points from other input surface, if alternative syntax
+**surfapp** name nbupoints nbvpoints surf [periodic_flag = 0]
+is used.
+Both command use for fitting approximation algorithm.
+**surfint** uses interpolation algorithm and can take array of point only from other input surface.
+Optional parameter **periodic_flag** allows to get correct periodical surfaces in U direction.
+U direction of result surface corresponds colums of initial array of points.
+If **periodic_flag** = 1, algorithm uses first row of array as last row and builds periodical surface.
 
 **Example:** 
 ~~~~~

dox/user_guides/modeling_data/modeling_data.md

@@ -1341,7 +1341,26 @@ Further, let us consider the triangle \f$ T_{0}\left \langle p_{0}, p_{1}, p_{2}
 <span>10.</span> Compute the center of OBB and its half dimensions.<br>
 <span>11.</span> Create OBB using the center, axes and half dimensions.<br>
 
-This algorithm is implemented in the *Bnd_OBB::ReBuild(...)* method.
+@subsubsection occt_modat_6_1_1_opt Creation of Optimal OBB from set of points
+
+For creation of the optimal OBB from set of points the same algorithm as described above is used but with some simplifications in logic and increased computation time.
+For the optimal OBB it is necessary to check all possible axes which can be created by the extremal points. And since the extremal points are only valid for the initial axes it is necessary to project the whole set of points on each axis.
+This approach usually provides much tighter OBB but the performance is lower. The complexity of the algorithm is still linear and with use of BVH for the set of points it is O(N + C*log(N)).
+
+Here is the example of optimal and not optimal OBB for the model using the set of 125K nodes:
+<table align="center">
+<tr>
+  <td>@figure{/user_guides/modeling_data/images/modeling_data_obb_125K.png,"Not optimal OBB by DiTo-14",160}</td>
+  <td>@figure{/user_guides/modeling_data/images/modeling_data_opt_obb_125K.png,"Optimal OBB by DiTo-14",160}</td>
+  <td>@figure{/user_guides/modeling_data/images/modeling_data_pca_obb_125K.png,"Not optimal OBB by PCA",160}</td>
+</tr>
+</table>
+
+Computation of the not optimal OBB in this case took 0.007 sec, optimal - 0.1 sec, which is about 14 times slower. Such performance is comparable to creation of the OBB for this shape by PCA approach (see below) which takes about 0.17 sec.
+
+The computation of optimal OBB is controlled by the same *theIsOptimal* flag in the BRepBndLib::AddOBB method as for PCA algorithm.
+
+These algorithms are implemented in the *Bnd_OBB::ReBuild(...)* method.
 
 @subsubsection occt_modat_6_1_2 Creation of OBB based on Axes of inertia
 

dox/user_guides/visualization/visualization.md

@@ -226,8 +226,6 @@ Selection is implemented as a combination of various algorithms divided among se
 #### SelectBasics
 
 *SelectBasics* package contains basic classes and interfaces for selection. The most notable are:
-  - *SelectBasics_SensitiveEntity* -- the base definition of a sensitive entity;
-  - *SelectBasics_EntityOwner* -- the base definition of the an entity owner -- the link between the sensitive entity and the object to be selected;
   - *SelectBasics_PickResult* -- the structure for storing quantitative results of detection procedure, for example, depth and distance to the center of geometry;
   - *SelectBasics_SelectingVolumeManager* -- the interface for interaction with the current selection frustum.
 
@@ -247,9 +245,11 @@ Each custom sensitive entity must inherit at least *SelectBasics_SensitiveEntity
   - triangulation;
   - wire.
 
-Each basic sensitive entity inherits *Select3D_SensitiveEntity*, which is a child class of *SelectBasics_SensitiveEntity*.
+Each basic sensitive entity inherits *Select3D_SensitiveEntity*.
 The package also contains two auxiliary classes, *Select3D_SensitivePoly* and *Select3D_SensitiveSet*.
 
+*Select3D_SensitiveEntity* -- the base definition of a sensitive entity.
+
 *Select3D_SensitiveSet* -- a base class for all complex sensitive entities that require the third level BVH usage. It implements traverse of the tree and defines an interface for the methods that check sub-entities.
 
 *Select3D_SensitivePoly* -- describes an arbitrary point set and implements basic functions for selection. It is important to know that this class does not perform any internal data checks. Hence, custom implementations of sensitive entity inherited from *Select3D_SensitivePoly* must satisfy the terms of Separating Axis Theorem to use standard OCCT overlap detection methods.

genproj

@@ -19,10 +19,6 @@ anOpt2=$2
 anOpt3=$3
 anOpt4=$4
 anOpt5=$5
-if [ "$aTarget" == "" ]; then
-  aTarget="cbp"
-  if [ "$aSystem" == "Darwin" ]; then aTarget="xcd"; fi;
-fi
 
 if [ ! -e "${aScriptPath}/custom.sh" ]; then
   tclsh "${aScriptPath}/adm/genconf.tcl"
@@ -37,6 +33,12 @@ source "${aScriptPath}/custom.sh"
 
 if [ -e "${aScriptPath}/env.sh" ]; then source "${aScriptPath}/env.sh"; fi
 
+if [ "$aTarget" == "" ]; then aTarget=$PRJFMT; fi;
+if [ "$aTarget" == "" ]; then
+  aTarget="cbp"
+  if [ "$aSystem" == "Darwin" ]; then aTarget="xcd"; fi;
+fi
+
 cd $aScriptPath
 tclsh "./adm/start.tcl" genproj ${aTarget} $anOpt2 $anOpt3 $anOpt4 $anOpt5
 

genproj.bat

@@ -49,6 +49,10 @@ if "%aPlatform%" == "" (
   )
 )
 
+set aPrjFmt=%PRJFMT%
+if "%aPrjFmt%" == "" ( set "aPrjFmt=vcxproj" )
+if "%aPrjFmt%" == "vcxproj" ( set "aPrjFmt=%VCFMT%" )
+
 cd %~dp0
-%TCL_EXEC% %~dp0adm/start.tcl genproj %VCFMT% %aPlatform% %3 %4 %5
+%TCL_EXEC% %~dp0adm/start.tcl genproj %aPrjFmt% %aPlatform% %3 %4 %5
 SET "PATH=%OLD_PATH%"

samples/mfc/standard/03_Viewer2d/src/StdAfx.h

@@ -155,7 +155,6 @@ class ISession2D_InteractiveObject;
 class V3d_Viewer;
 class SelectMgr_SelectableObject;
 class TCollection_AsciiString;
-class SelectBasics_EntityOwner;
 class gp_Pnt2d;
 
 //{{AFX_INSERT_LOCATION}}

samples/mfc/standard/Common/ISession2D/ISession2D_Shape.cpp

@@ -17,7 +17,8 @@ void ISession2D_Shape::Add(const TopoDS_Shape& aShape)
   myListOfShape.Append(aShape);
   myAlgo.Nullify();
   myPolyAlgo.Nullify();
-  Update(); // protected method used to specify that the presentation are not up to date 
+  SetToUpdate();
+  UpdatePresentations();
 }
 
 void ISession2D_Shape::Remove (const TopoDS_Shape& theShape)
@@ -42,23 +43,17 @@ void ISession2D_Shape::SetProjector (HLRAlgo_Projector& aProjector)
   myProjector= aProjector;
   myAlgo.Nullify();
   myPolyAlgo.Nullify();
-  Update(); // protected method used to specify that the presentation are not up to date 
+  SetToUpdate();
+  UpdatePresentations();
 };
 
 
 void ISession2D_Shape::SetNbIsos(Standard_Integer& aNbIsos)
-{ 
-	myNbIsos= aNbIsos; 
-	myAlgo.Nullify(); 
-    
-	// declare the mode 100 to 110 as non valid
-	for (int i=100;i<=110;i++)
-       Update(i,Standard_False); // protected method used to specify that the presentation are not up to date 
-
-	// declare the mode 1100 to 1110 as non valid
-	for (int i=1100;i<=1110;i++)
-       Update(i,Standard_False); // protected method used to specify that the presentation are not up to date 
-
+{
+  myNbIsos= aNbIsos;
+  myAlgo.Nullify();
+  SetToUpdate();
+  UpdatePresentations();
 };
 
 void ISession2D_Shape::BuildAlgo() 

samples/tcl/ANC101.tcl

@@ -264,11 +264,11 @@ bfuse _model _model t_s
 explode _model e
 
 # Make a weld at joint edges of platform and wedge 
-blend _model _model 2 _model_26
 blend _model _model 2 _model_27
 blend _model _model 2 _model_28
 blend _model _model 2 _model_29
-blend _model _model 2 _model_31
+blend _model _model 2 _model_30
+blend _model _model 2 _model_32
 
 # Cylinder on wedge
 blend result _model 2 _model_161
@@ -276,7 +276,7 @@ blend result _model 2 _model_161
 # Show result
 pload VISUALIZATION
 vinit Driver1/Viewer1/View1
-vsetcolorbg 200 200 255
+vbackground -color 0.784314 0.784314 1
 vdisplay -dispMode 1 result
 vfit
 vaspects result -setFaceBoundaryDraw 1 -mostContinuity c2

samples/tcl/MBBGehauseRohteil.tcl

@@ -262,7 +262,7 @@ unifysamedom result  p_1
 # Show result
 pload VISUALIZATION
 vinit Driver1/Viewer1/View1
-vsetcolorbg 200 200 255
+vbackground -color 0.784314 0.784314 1
 vdisplay -dispMode 1 result
 vfit
 vaspects result -setFaceBoundaryDraw 1

samples/tcl/Penrose.tcl

@@ -53,7 +53,7 @@ for {set i 1} {$i <= 1} {incr i} {
 
 # prepare a view
 vinit Penrose w=1024 h=512
-vsetcolorbg 255 255 255
+vbackground -color WHITE
 vrenderparams -rayTrace -fsaa on -reflections off -shadows off
 
 # set camera position and adjust lights

samples/tcl/dimensions.tcl

@@ -19,7 +19,7 @@ restore $aBotLoc b
 vinit View1 w=768 h=768
 vclear
 vsetdispmode 0
-vsetcolorbg 255 255 255
+vbackground -color WHITE
 vbottom
 
 puts "Getting cut projection..."

samples/tcl/materials.tcl

@@ -51,7 +51,7 @@ proc drawObjects {theRow theColor} {
     uplevel #0 box     $aBox $aCtr $aCtr $aCtr $aSize $aSize $aSize
     uplevel #0 ttranslate   $aSph $x $y 0
     uplevel #0 ttranslate   $aBox [expr $x + 10] $y 0
-    uplevel #0 vdisplay     -noredraw $aSph $aBox
+    uplevel #0 vdisplay     -noredraw -dispMode 1 $aSph $aBox
     uplevel #0 vsetmaterial -noredraw $aSph $aBox $aMatIter
     if {$theColor != ""} {
       uplevel #0 vsetcolor  -noredraw $aSph $aBox $theColor
@@ -64,21 +64,19 @@ proc drawObjects {theRow theColor} {
 # setup 3D viewer content
 pload MODELING VISUALIZATION
 
-catch { vclose View1 }
-vinit View1 w=768 h=768
 vclear
+vclose ALL
+vinit View1 w=768 h=768
 vtop
 vglinfo
-vsetgradientbg 180 200 255 180 180 180 2
+vbackground -gradient 0.705882 0.784314 1  0.705882 0.705882 0.705882 -gradientMode VERTICAL
 
 vlight -change 0 -dir 0.577 -0.577 -0.577
-vsetdispmode 1
 vrenderparams -msaa 8
 
 # adjust scene bounding box
 box bnd 0 0 0 180 210 1
-vdisplay -noredraw bnd
-vsetdispmode       bnd 0
+vdisplay -noredraw -dispMode 0 bnd
 vfit
 vremove -noredraw  bnd
 
@@ -88,5 +86,3 @@ drawObjects 0 ""
 drawObjects 1 red
 drawObjects 2 green
 drawObjects 3 blue1
-#vfit
-vzfit

samples/tcl/pencil.tcl

@@ -59,7 +59,7 @@ XShow D
 vfit
 vsetdispmode 1
 vrenderparams -msaa 8
-vsetcolorbg 255 255 255
+vbackground -color WHITE
 
 #param write.iges.brep.mode 1
 #WriteIges D d:/pencil3.igs

samples/tcl/raytrace.tcl

@@ -30,7 +30,7 @@ vsettransparency glass 0.6
 vlight new spot pos -100 -100 300
 
 # set white background and fit view
-vsetcolorbg 255 255 255
+vbackground -color WHITE
 vfit
 
 # set ray tracing

samples/tcl/snowflake.tcl

@@ -129,7 +129,7 @@ vrenderparams -msaa 8
 vsetcolor snowflake 0 0 0 
 vsetcolor lines 0 0 0 
 vsetcolor text 0 0 0 
-vsetcolorbg 255 255 255
+vbackground -color WHITE
 vtop
 vfit
 

src/AIS/AIS.cxx

@@ -14,10 +14,10 @@
 // Alternatively, this file may be used under the terms of Open CASCADE
 // commercial license or contractual agreement.
 
+#include <AIS.hxx>
 
 #include <Adaptor3d_HCurve.hxx>
 #include <Adaptor3d_HSurface.hxx>
-#include <AIS.hxx>
 #include <Bnd_Box.hxx>
 #include <BRep_Tool.hxx>
 #include <BRepAdaptor_Curve.hxx>
@@ -783,6 +783,7 @@ Standard_Boolean AIS::GetPlaneFromFace(const TopoDS_Face&            aFace,
   BRepAdaptor_Surface surf1( aFace );
   Handle( Adaptor3d_HSurface ) surf2;
   Standard_Boolean isOffset = Standard_False;
+  Offset = 0.0;
 
   if (surf1.GetType() == GeomAbs_OffsetSurface)
   {
@@ -801,7 +802,6 @@ Standard_Boolean AIS::GetPlaneFromFace(const TopoDS_Face&            aFace,
   {
     aPlane = surf2->Plane();
     aSurfType = AIS_KOS_Plane;
-    Offset = 0.;
     Result = Standard_True;
   }
 
@@ -817,7 +817,6 @@ Standard_Boolean AIS::GetPlaneFromFace(const TopoDS_Face&            aFace,
       gp_Pln thePlane( LinePos, LineDir ^ ExtrusionDir);
       aPlane = thePlane;
       aSurfType = AIS_KOS_Plane;
-      Offset = 0.;
       Result = Standard_True;
     }
   }
@@ -826,7 +825,6 @@ Standard_Boolean AIS::GetPlaneFromFace(const TopoDS_Face&            aFace,
   {
     aSurf = (Handle( Geom_OffsetSurface )::DownCast( aSurf ))->Surface();
     aPlane = (Handle( Geom_Plane )::DownCast( aSurf ))->Pln();
-    Offset = 0.0e0;
   }
   if (Result == Standard_False)
   {
@@ -839,7 +837,6 @@ Standard_Boolean AIS::GetPlaneFromFace(const TopoDS_Face&            aFace,
         TheType == STANDARD_TYPE(Geom_ToroidalSurface))
       {
         aSurf = (Handle( Geom_OffsetSurface )::DownCast( aSurf ))->Surface();
-        Offset = 0.0e0;
       }
       else
       {
@@ -899,20 +896,18 @@ gp_Pnt AIS::ProjectPointOnLine( const gp_Pnt & aPoint, const gp_Lin & aLine )
 //function : InitFaceLength
 //purpose  : 
 //=======================================================================
-void AIS::InitFaceLength (const TopoDS_Face& aFace,
-                          gp_Pln               & aPlane,
-                          Handle(Geom_Surface) & aSurface,
-                          AIS_KindOfSurface    & aSurfaceType,
-                          Standard_Real        & anOffset)
+void AIS::InitFaceLength (const TopoDS_Face& theFace,
+                          gp_Pln& thePlane,
+                          Handle(Geom_Surface)& theSurface,
+                          AIS_KindOfSurface& theSurfaceType,
+                          Standard_Real& theOffset)
 {
-  AIS::GetPlaneFromFace( aFace, aPlane, aSurface, aSurfaceType, anOffset );
-  
-  if (Abs( anOffset ) > Precision::Confusion())
-    {
-      aSurface = new Geom_OffsetSurface( aSurface, anOffset );
-      anOffset = 0.0e0;
-    }
-  
+  if (AIS::GetPlaneFromFace (theFace, thePlane, theSurface, theSurfaceType, theOffset)
+   && Abs (theOffset) > Precision::Confusion())
+  {
+    theSurface = new Geom_OffsetSurface (theSurface, theOffset);
+    theOffset = 0.0e0;
+  }
 }
 
 //=======================================================================

src/AIS/AIS.hxx

@@ -17,73 +17,26 @@
 #ifndef _AIS_HeaderFile
 #define _AIS_HeaderFile
 
+#include <AIS_KindOfSurface.hxx>
+#include <Aspect_TypeOfLine.hxx>
+#include <Aspect_TypeOfMarker.hxx>
+#include <gp_Dir.hxx>
+#include <gp_Pnt.hxx>
+#include <Quantity_NameOfColor.hxx>
+#include <Prs3d_Drawer.hxx>
+#include <Prs3d_Presentation.hxx>
 #include <Standard.hxx>
 #include <Standard_DefineAlloc.hxx>
 #include <Standard_Handle.hxx>
 
-#include <Standard_Boolean.hxx>
-#include <Standard_Integer.hxx>
-#include <Standard_Real.hxx>
-#include <AIS_KindOfSurface.hxx>
-#include <Prs3d_Drawer.hxx>
-#include <Quantity_NameOfColor.hxx>
-#include <Aspect_TypeOfLine.hxx>
-#include <Aspect_TypeOfMarker.hxx>
-class gp_Pnt;
-class TopoDS_Shape;
-class gp_Lin;
-class Geom_Curve;
-class TopoDS_Edge;
-class Geom_Plane;
-class TopoDS_Vertex;
-class TopoDS_Face;
-class gp_Pln;
-class Geom_Surface;
-class gp_Dir;
 class Bnd_Box;
-class gp_Elips;
-class Prs3d_Presentation;
-class AIS_Triangulation;
-class AIS_InteractiveContext;
-class AIS_GraphicTool;
-class AIS_GlobalStatus;
-class AIS_InteractiveObject;
-class AIS_Point;
-class AIS_Axis;
-class AIS_Trihedron;
-class AIS_PlaneTrihedron;
-class AIS_Line;
-class AIS_Circle;
-class AIS_Plane;
-class AIS_Shape;
-class AIS_ConnectedInteractive;
-class AIS_MultipleConnectedInteractive;
-class AIS_DimensionOwner;
-class AIS_Relation;
-class AIS_EllipseRadiusDimension;
-class AIS_MaxRadiusDimension;
-class AIS_MinRadiusDimension;
-class AIS_Chamf2dDimension;
-class AIS_Chamf3dDimension;
-class AIS_OffsetDimension;
-class AIS_FixRelation;
-class AIS_PerpendicularRelation;
-class AIS_ParallelRelation;
-class AIS_TangentRelation;
-class AIS_ConcentricRelation;
-class AIS_IdenticRelation;
-class AIS_SymmetricRelation;
-class AIS_MidPointRelation;
-class AIS_EqualRadiusRelation;
-class AIS_EqualDistanceRelation;
-class AIS_TypeFilter;
-class AIS_SignatureFilter;
-class AIS_ExclusionFilter;
-class AIS_AttributeFilter;
-class AIS_C0RegularityFilter;
-class AIS_BadEdgeFilter;
-class AIS_Selection;
-
+class Geom_Curve;
+class Geom_Plane;
+class Geom_Surface;
+class TopoDS_Edge;
+class TopoDS_Face;
+class TopoDS_Shape;
+class TopoDS_Vertex;
 
 //! Application Interactive Services provide the means to create links between an application GUI viewer and
 //! the packages which are used to manage selection and presentation.

src/AIS/AIS_Animation.cxx

@@ -168,7 +168,7 @@ void AIS_Animation::StartTimer (const Standard_Real    theStartPts,
 {
   if (myTimer.IsNull())
   {
-    myTimer = new AIS_AnimationTimer();
+    myTimer = new Media_Timer();
   }
   myTimer->Stop();
   myTimer->Seek (theStartPts);

src/AIS/AIS_Animation.hxx

@@ -191,7 +191,7 @@ protected:
 
 protected:
 
-  Handle(AIS_AnimationTimer) myTimer;
+  Handle(Media_Timer) myTimer;
 
   TCollection_AsciiString myName;           //!< animation name
   NCollection_Sequence<Handle(AIS_Animation)>

src/AIS/AIS_AnimationTimer.hxx

@@ -15,60 +15,7 @@
 #ifndef _AIS_AnimationTimer_HeaderFile
 #define _AIS_AnimationTimer_HeaderFile
 
-#include <OSD_Timer.hxx>
-#include <Standard_Transient.hxx>
-#include <Standard_Type.hxx>
-
-//! Auxiliary class defining the animation timer.
-class AIS_AnimationTimer : public Standard_Transient
-{
-  DEFINE_STANDARD_RTTIEXT(AIS_AnimationTimer, Standard_Transient)
-public:
-
-  //! Empty constructor.
-  AIS_AnimationTimer() : myTimerFrom (0.0), myTimerSpeed (1.0) {}
-
-  //! Return elapsed time in seconds.
-  Standard_Real ElapsedTime() const
-  {
-    return myTimerFrom + myTimer.ElapsedTime() * myTimerSpeed;
-  }
-
-  //! Return playback speed coefficient (1.0 means normal speed).
-  Standard_Real PlaybackSpeed() const { return myTimerSpeed; }
-
-  //! Setup playback speed coefficient.
-  Standard_EXPORT void SetPlaybackSpeed (const Standard_Real theSpeed);
-
-  //! Return true if timer has been started.
-  Standard_Boolean IsStarted() const
-  {
-    return myTimer.IsStarted();
-  }
-
-  //! Start the timer.
-  void Start()
-  {
-    myTimer.Start();
-  }
-
-  //! Pause the timer.
-  Standard_EXPORT void Pause();
-
-  //! Stop the timer.
-  Standard_EXPORT void Stop();
-
-  //! Seek the timer to specified position.
-  Standard_EXPORT void Seek (const Standard_Real theTime);
-
-protected:
-
-  OSD_Timer     myTimer;
-  Standard_Real myTimerFrom;
-  Standard_Real myTimerSpeed;
-
-};
-
-DEFINE_STANDARD_HANDLE(AIS_AnimationTimer, Standard_Transient)
+#include <Media_Timer.hxx>
+typedef Media_Timer AIS_AnimationTimer;
 
 #endif // _AIS_AnimationTimer_HeaderFile

src/AIS/AIS_Axis.cxx

@@ -34,10 +34,8 @@
 #include <Prs3d_Projector.hxx>
 #include <Quantity_Color.hxx>
 #include <Select3D_SensitiveSegment.hxx>
-#include <SelectBasics_EntityOwner.hxx>
 #include <SelectMgr_EntityOwner.hxx>
 #include <SelectMgr_Selection.hxx>
-#include <Standard_Type.hxx>
 #include <StdPrs_Curve.hxx>
 #include <TColgp_Array1OfPnt.hxx>
 #include <TopoDS.hxx>
@@ -81,7 +79,7 @@ myIsXYZAxis(Standard_True)
   Standard_Real aLength;
   try {
     aLength = UnitsAPI::AnyToLS(100. ,"mm");
-  } catch (Standard_Failure) {
+  } catch (Standard_Failure const&) {
     aLength = 0.1;
   }
   DA->SetAxisLength(aLength,aLength,aLength);
@@ -199,8 +197,7 @@ void AIS_Axis::Compute(const Handle(Prs3d_Projector)& aProjector, const Handle(G
 void AIS_Axis::ComputeSelection(const Handle(SelectMgr_Selection)& aSelection,
 				const Standard_Integer)
 {
-  Handle(SelectMgr_EntityOwner) eown = new SelectMgr_EntityOwner(this);
-  eown -> SelectBasics_EntityOwner::Set(3);
+  Handle(SelectMgr_EntityOwner) eown = new SelectMgr_EntityOwner (this, 3);
   Handle(Select3D_SensitiveSegment) seg = new Select3D_SensitiveSegment(eown,
 									myPfirst,
 									myPlast);
@@ -221,7 +218,7 @@ void AIS_Axis::SetColor(const Quantity_Color &aCol)
   DA->LineAspect(Prs3d_DP_XAxis)->SetColor(aCol);
   DA->LineAspect(Prs3d_DP_YAxis)->SetColor(aCol);
   DA->LineAspect(Prs3d_DP_ZAxis)->SetColor(aCol);
-  
+  SynchronizeAspects();
 }
 
 //=======================================================================
@@ -230,7 +227,6 @@ void AIS_Axis::SetColor(const Quantity_Color &aCol)
 //=======================================================================
 void AIS_Axis::SetWidth(const Standard_Real aValue)
 {
-  
   if(aValue<0.0) return;
   if(aValue==0) UnsetWidth();
   
@@ -240,6 +236,7 @@ void AIS_Axis::SetWidth(const Standard_Real aValue)
   DA->LineAspect(Prs3d_DP_XAxis)->SetWidth(aValue);
   DA->LineAspect(Prs3d_DP_YAxis)->SetWidth(aValue);
   DA->LineAspect(Prs3d_DP_ZAxis)->SetWidth(aValue);
+  SynchronizeAspects();
 }
 
 
@@ -324,14 +321,13 @@ AcceptDisplayMode(const Standard_Integer aMode) const
 //=======================================================================
 void AIS_Axis::UnsetColor()
 {
-  
   myDrawer->LineAspect()->SetColor(Quantity_NOC_RED);
-
-  hasOwnColor=Standard_False;
+  hasOwnColor = Standard_False;
 
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_XAxis)->SetColor(Quantity_NOC_TURQUOISE);
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_YAxis)->SetColor(Quantity_NOC_TURQUOISE);
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_ZAxis)->SetColor(Quantity_NOC_TURQUOISE);
+  SynchronizeAspects();
 }
 //=======================================================================
 //function : UnsetWidth
@@ -340,10 +336,10 @@ void AIS_Axis::UnsetColor()
 
 void AIS_Axis::UnsetWidth()
 {
-  myOwnWidth = 0.0;
+  myOwnWidth = 0.0f;
   myDrawer->LineAspect()->SetWidth(1.);
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_XAxis)->SetWidth(1.);
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_YAxis)->SetWidth(1.);
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_ZAxis)->SetWidth(1.);
+  SynchronizeAspects();
 }
-

src/AIS/AIS_CameraFrustum.cxx

@@ -90,6 +90,7 @@ void AIS_CameraFrustum::SetColor (const Quantity_Color& theColor)
   AIS_InteractiveObject::SetColor (theColor);
   myDrawer->ShadingAspect()->SetColor (theColor);
   myDrawer->LineAspect()->SetColor (theColor);
+  SynchronizeAspects();
 }
 
 //=======================================================================
@@ -107,6 +108,7 @@ void AIS_CameraFrustum::UnsetColor()
 
   myDrawer->ShadingAspect()->SetColor (THE_DEFAULT_COLOR);
   myDrawer->LineAspect()->SetColor (THE_DEFAULT_COLOR);
+  SynchronizeAspects();
 }
 
 //=======================================================================
@@ -117,6 +119,7 @@ void AIS_CameraFrustum::UnsetTransparency()
 {
   myDrawer->ShadingAspect()->SetTransparency (0.0f);
   myDrawer->SetTransparency (0.0f);
+  SynchronizeAspects();
 }
 
 //=======================================================================

src/AIS/AIS_Chamf2dDimension.hxx

@@ -17,29 +17,13 @@
 #ifndef _AIS_Chamf2dDimension_HeaderFile
 #define _AIS_Chamf2dDimension_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
-#include <gp_Dir.hxx>
-#include <AIS_Relation.hxx>
-#include <Standard_Real.hxx>
-#include <DsgPrs_ArrowSide.hxx>
 #include <AIS_KindOfDimension.hxx>
-#include <Standard_Boolean.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
+#include <AIS_Relation.hxx>
+#include <DsgPrs_ArrowSide.hxx>
+#include <gp_Dir.hxx>
+
 class Geom_Plane;
-class TCollection_ExtendedString;
-class gp_Pnt;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_Chamf2dDimension;
 DEFINE_STANDARD_HANDLE(AIS_Chamf2dDimension, AIS_Relation)
 
 //! A framework to define display of 2D chamfers.
@@ -48,10 +32,9 @@ DEFINE_STANDARD_HANDLE(AIS_Chamf2dDimension, AIS_Relation)
 //! chamfer, or the angle if it is not.
 class AIS_Chamf2dDimension : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_Chamf2dDimension, AIS_Relation)
 public:
 
-  
   //! Constructs the display object for 2D chamfers.
   //! This object is defined by the face aFShape, the
   //! dimension aVal, the plane aPlane and the text aText.
@@ -79,18 +62,7 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_Chamf2dDimension,AIS_Relation)
-
-protected:
-
-
-
-
 private:
-
   
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
@@ -101,14 +73,8 @@ private:
   gp_Pnt myPntAttach;
   gp_Dir myDir;
 
-
 };
 
-
 #include <AIS_Chamf2dDimension.lxx>
 
-
-
-
-
 #endif // _AIS_Chamf2dDimension_HeaderFile

src/AIS/AIS_Chamf3dDimension.hxx

@@ -17,28 +17,11 @@
 #ifndef _AIS_Chamf3dDimension_HeaderFile
 #define _AIS_Chamf3dDimension_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
-#include <gp_Dir.hxx>
-#include <AIS_Relation.hxx>
-#include <Standard_Real.hxx>
-#include <DsgPrs_ArrowSide.hxx>
 #include <AIS_KindOfDimension.hxx>
-#include <Standard_Boolean.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
-class TCollection_ExtendedString;
-class gp_Pnt;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
+#include <AIS_Relation.hxx>
+#include <DsgPrs_ArrowSide.hxx>
+#include <gp_Dir.hxx>
 
-
-class AIS_Chamf3dDimension;
 DEFINE_STANDARD_HANDLE(AIS_Chamf3dDimension, AIS_Relation)
 
 //! A framework to define display of 3D chamfers.
@@ -47,10 +30,9 @@ DEFINE_STANDARD_HANDLE(AIS_Chamf3dDimension, AIS_Relation)
 //! chamfer, or the angle if it is not.
 class AIS_Chamf3dDimension : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_Chamf3dDimension, AIS_Relation)
 public:
 
-  
   //! Constructs a display object for 3D chamfers.
   //! This object is defined by the shape aFShape, the
   //! dimension aVal and the text aText.
@@ -78,19 +60,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_Chamf3dDimension,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -100,14 +71,8 @@ private:
   gp_Pnt myPntAttach;
   gp_Dir myDir;
 
-
 };
 
-
 #include <AIS_Chamf3dDimension.lxx>
 
-
-
-
-
 #endif // _AIS_Chamf3dDimension_HeaderFile

src/AIS/AIS_Circle.cxx

@@ -112,6 +112,29 @@ void AIS_Circle::ComputeSelection(const Handle(SelectMgr_Selection)& aSelection,
 
 }
 
+//=======================================================================
+//function : replaceWithNewLineAspect
+//purpose  :
+//=======================================================================
+void AIS_Circle::replaceWithNewLineAspect (const Handle(Prs3d_LineAspect)& theAspect)
+{
+  if (!myDrawer->HasLink())
+  {
+    myDrawer->SetLineAspect (theAspect);
+    return;
+  }
+
+  const Handle(Graphic3d_AspectLine3d) anAspectOld = myDrawer->LineAspect()->Aspect();
+  const Handle(Graphic3d_AspectLine3d) anAspectNew = !theAspect.IsNull() ? theAspect->Aspect() : myDrawer->Link()->LineAspect()->Aspect();
+  if (anAspectNew != anAspectOld)
+  {
+    myDrawer->SetLineAspect (theAspect);
+    Graphic3d_MapOfAspectsToAspects aReplaceMap;
+    aReplaceMap.Bind (anAspectOld, anAspectNew);
+    replaceAspects (aReplaceMap);
+  }
+}
+
 //=======================================================================
 //function : SetColor
 //purpose  : 
@@ -122,34 +145,41 @@ void AIS_Circle::SetColor(const Quantity_Color &aCol)
   hasOwnColor=Standard_True;
   myDrawer->SetColor (aCol);
 
-  Standard_Real WW = HasWidth() ? myOwnWidth :
-                                  myDrawer->HasLink() ?
-                                  AIS_GraphicTool::GetLineWidth (myDrawer->Link(), AIS_TOA_Line) :
-                                  1.;
-
-  if (!myDrawer->HasOwnLineAspect ())
-    myDrawer->SetLineAspect (new Prs3d_LineAspect(aCol,Aspect_TOL_SOLID,WW));
+  if (!myDrawer->HasOwnLineAspect())
+  {
+    Standard_Real WW = HasWidth() ? myOwnWidth :
+                                    myDrawer->HasLink() ?
+                                    AIS_GraphicTool::GetLineWidth (myDrawer->Link(), AIS_TOA_Line) :
+                                    1.;
+    replaceWithNewLineAspect (new Prs3d_LineAspect (aCol, Aspect_TOL_SOLID, WW));
+  }
   else
+  {
     myDrawer->LineAspect()->SetColor(aCol);
+    SynchronizeAspects();
+  }
 }
 
-
-
 //=======================================================================
 //function : SetWidth 
 //purpose  : 
 //=======================================================================
 void AIS_Circle::SetWidth(const Standard_Real aValue)
 {
-  myOwnWidth=aValue;
+  myOwnWidth = (Standard_ShortReal )aValue;
 
-  if (!myDrawer->HasOwnLineAspect ()) {
+  if (!myDrawer->HasOwnLineAspect())
+  {
     Quantity_Color CC = Quantity_NOC_YELLOW;
     if( HasColor() ) CC = myDrawer->Color();
     else if(myDrawer->HasLink()) AIS_GraphicTool::GetLineColor (myDrawer->Link(), AIS_TOA_Line, CC);
-    myDrawer->SetLineAspect (new Prs3d_LineAspect(CC,Aspect_TOL_SOLID,aValue));
-  } else
+    replaceWithNewLineAspect (new Prs3d_LineAspect (CC, Aspect_TOL_SOLID, aValue));
+  }
+  else
+  {
     myDrawer->LineAspect()->SetWidth(aValue);
+    SynchronizeAspects();
+  }
 }
 
 
@@ -161,15 +191,18 @@ void AIS_Circle::UnsetColor()
 {
   hasOwnColor = Standard_False;
 
-  Handle(Prs3d_LineAspect) NullAsp;
-
-  if (!HasWidth()) myDrawer->SetLineAspect(NullAsp);
-  else{
+  if (!HasWidth())
+  {
+    replaceWithNewLineAspect (Handle(Prs3d_LineAspect)());
+  }
+  else
+  {
     Quantity_Color CC = Quantity_NOC_YELLOW;;
     if( HasColor() ) CC = myDrawer->Color();
     else if (myDrawer->HasLink()) AIS_GraphicTool::GetLineColor(myDrawer->Link(),AIS_TOA_Line,CC);
     myDrawer->LineAspect()->SetColor(CC);
     myDrawer->SetColor (CC);
+    SynchronizeAspects();
   }
 }
 
@@ -179,11 +212,13 @@ void AIS_Circle::UnsetColor()
 //=======================================================================
 void AIS_Circle::UnsetWidth()
 {
-  Handle(Prs3d_LineAspect) NullAsp;
-
-  if (!HasColor()) myDrawer->SetLineAspect(NullAsp);
-  else{
-   Standard_Real WW = myDrawer->HasLink() ? AIS_GraphicTool::GetLineWidth(myDrawer->Link(),AIS_TOA_Line) : 1.;
+  if (!HasColor())
+  {
+    replaceWithNewLineAspect (Handle(Prs3d_LineAspect)());
+  }
+  else
+  {
+   Standard_ShortReal WW = myDrawer->HasLink() ? (Standard_ShortReal )AIS_GraphicTool::GetLineWidth(myDrawer->Link(),AIS_TOA_Line) : 1.0f;
    myDrawer->LineAspect()->SetWidth(WW);
    myOwnWidth = WW;
   }

src/AIS/AIS_Circle.hxx

@@ -115,6 +115,9 @@ private:
   
   Standard_EXPORT void ComputeArcSelection (const Handle(SelectMgr_Selection)& aSelection);
 
+  //! Replace aspects of already computed groups with the new value.
+  void replaceWithNewLineAspect (const Handle(Prs3d_LineAspect)& theAspect);
+
 private:
 
   Handle(Geom_Circle) myComponent;

src/AIS/AIS_ColoredShape.cxx

@@ -124,8 +124,7 @@ Handle(AIS_ColoredDrawer) AIS_ColoredShape::CustomAspects (const TopoDS_Shape& t
   {
     aDrawer = new AIS_ColoredDrawer (myDrawer);
     myShapeColors.Bind (theShape, aDrawer);
-    LoadRecomputable (AIS_WireFrame);
-    LoadRecomputable (AIS_Shaded);
+    SetToUpdate();
   }
   return aDrawer;
 }
@@ -141,8 +140,7 @@ void AIS_ColoredShape::ClearCustomAspects()
     return;
   }
   myShapeColors.Clear();
-  LoadRecomputable (AIS_WireFrame);
-  LoadRecomputable (AIS_Shaded);
+  SetToUpdate();
 }
 
 //=======================================================================
@@ -157,8 +155,7 @@ void AIS_ColoredShape::UnsetCustomAspects (const TopoDS_Shape&    theShape,
     return;
   }
 
-  LoadRecomputable (AIS_WireFrame);
-  LoadRecomputable (AIS_Shaded);
+  SetToUpdate();
   if (theToUnregister)
   {
     myShapeColors.UnBind (theShape);
@@ -183,8 +180,6 @@ void AIS_ColoredShape::SetCustomColor (const TopoDS_Shape&   theShape,
   const Handle(AIS_ColoredDrawer)& aDrawer = CustomAspects (theShape);
   setColor (aDrawer, theColor);
   aDrawer->SetOwnColor (theColor);
-  LoadRecomputable (AIS_WireFrame);
-  LoadRecomputable (AIS_Shaded);
 }
 
 //=======================================================================
@@ -202,8 +197,6 @@ void AIS_ColoredShape::SetCustomTransparency (const TopoDS_Shape& theShape,
   const Handle(AIS_ColoredDrawer)& aDrawer = CustomAspects (theShape);
   setTransparency (aDrawer, theTransparency);
   aDrawer->SetOwnTransparency (theTransparency);
-  LoadRecomputable (AIS_WireFrame);
-  LoadRecomputable (AIS_Shaded);
 }
 
 //=======================================================================
@@ -221,8 +214,6 @@ void AIS_ColoredShape::SetCustomWidth (const TopoDS_Shape& theShape,
   const Handle(AIS_ColoredDrawer)& aDrawer = CustomAspects (theShape);
   setWidth (aDrawer, theLineWidth);
   aDrawer->SetOwnWidth (theLineWidth);
-  LoadRecomputable (AIS_WireFrame);
-  LoadRecomputable (AIS_Shaded);
 }
 
 //=======================================================================
@@ -521,8 +512,8 @@ void AIS_ColoredShape::ComputeSelection (const Handle(SelectMgr_Selection)& theS
   Handle(SelectMgr_SelectableObject) aThis (this);
   for (NCollection_Vector<Handle(SelectMgr_SensitiveEntity)>::Iterator aSelEntIter (theSelection->Entities()); aSelEntIter.More(); aSelEntIter.Next())
   {
-    Handle(SelectMgr_EntityOwner) anOwner = Handle(SelectMgr_EntityOwner)::DownCast (aSelEntIter.Value()->BaseSensitive()->OwnerId());
-    anOwner->Set (aThis);
+    const Handle(SelectMgr_EntityOwner)& anOwner = aSelEntIter.Value()->BaseSensitive()->OwnerId();
+    anOwner->SetSelectable (aThis);
   }
 
   StdSelect_BRepSelectionTool::PreBuildBVH (theSelection);

src/AIS/AIS_ConcentricRelation.hxx

@@ -17,24 +17,11 @@
 #ifndef _AIS_ConcentricRelation_HeaderFile
 #define _AIS_ConcentricRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
-#include <Standard_Real.hxx>
-#include <gp_Dir.hxx>
 #include <AIS_Relation.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
+#include <gp_Dir.hxx>
+
 class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_ConcentricRelation;
 DEFINE_STANDARD_HANDLE(AIS_ConcentricRelation, AIS_Relation)
 
 //! A framework to define a constraint by a relation of
@@ -44,10 +31,9 @@ DEFINE_STANDARD_HANDLE(AIS_ConcentricRelation, AIS_Relation)
 //! relation of concentricity can be extended.
 class AIS_ConcentricRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_ConcentricRelation, AIS_Relation)
 public:
 
-  
   //! Constructs the display object for concentric relations
   //! between shapes.
   //! This object is defined by the two shapes, aFShape
@@ -65,19 +51,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_ConcentricRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -95,13 +70,6 @@ private:
   gp_Dir myDir;
   gp_Pnt myPnt;
 
-
 };
 
-
-
-
-
-
-
 #endif // _AIS_ConcentricRelation_HeaderFile

src/AIS/AIS_ConnectedInteractive.cxx

@@ -23,7 +23,6 @@
 #include <Precision.hxx>
 #include <Prs3d_Drawer.hxx>
 #include <Prs3d_Projector.hxx>
-#include <PrsMgr_ModedPresentation.hxx>
 #include <Select3D_SensitiveEntity.hxx>
 #include <SelectMgr_EntityOwner.hxx>
 #include <SelectMgr_Selection.hxx>
@@ -92,12 +91,12 @@ void AIS_ConnectedInteractive::connect (const Handle(AIS_InteractiveObject)& the
 
 void AIS_ConnectedInteractive::Disconnect()
 {
-  for(Standard_Integer aPrsIter = 1; aPrsIter <= myPresentations.Length(); ++aPrsIter)
+  for (PrsMgr_Presentations::Iterator aPrsIter (myPresentations); aPrsIter.More(); aPrsIter.Next())
   {
-    const Handle(PrsMgr_Presentation)& aPrs = myPresentations (aPrsIter).Presentation();
+    const Handle(PrsMgr_Presentation)& aPrs = aPrsIter.Value();
     if (!aPrs.IsNull())
     {
-      aPrs->Presentation()->DisconnectAll (Graphic3d_TOC_DESCENDANT);
+      aPrs->DisconnectAll (Graphic3d_TOC_DESCENDANT);
     }
   }
 }
@@ -112,7 +111,7 @@ void AIS_ConnectedInteractive::Compute (const Handle(PrsMgr_PresentationManager3
   if (HasConnection())
   {
     thePrs->Clear (Standard_False);
-    thePrs->RemoveAll();
+    thePrs->DisconnectAll (Graphic3d_TOC_DESCENDANT);
 
     if (!myReference->HasInteractiveContext())
     {
@@ -234,7 +233,7 @@ void AIS_ConnectedInteractive::ComputeSelection (const Handle(SelectMgr_Selectio
 
   for (NCollection_Vector<Handle(SelectMgr_SensitiveEntity)>::Iterator aSelEntIter (TheRefSel->Entities()); aSelEntIter.More(); aSelEntIter.Next())
   {
-    if (Handle(Select3D_SensitiveEntity) aSensitive = Handle(Select3D_SensitiveEntity)::DownCast (aSelEntIter.Value()->BaseSensitive()))
+    if (const Handle(Select3D_SensitiveEntity)& aSensitive = aSelEntIter.Value()->BaseSensitive())
     {
       // Get the copy of SE3D
       if (Handle(Select3D_SensitiveEntity) aNewSensitive = aSensitive->GetConnected())
@@ -272,7 +271,7 @@ void AIS_ConnectedInteractive::computeSubShapeSelection (const Handle(SelectMgr_
   Shapes2EntitiesMap aShapes2EntitiesMap;
   for (NCollection_Vector<Handle(SelectMgr_SensitiveEntity)>::Iterator aSelEntIter (aRefSel->Entities()); aSelEntIter.More(); aSelEntIter.Next())
   {
-    if (Handle(Select3D_SensitiveEntity) aSE = Handle(Select3D_SensitiveEntity)::DownCast (aSelEntIter.Value()->BaseSensitive()))
+    if (const Handle(Select3D_SensitiveEntity)& aSE = aSelEntIter.Value()->BaseSensitive())
     {
       if (Handle(StdSelect_BRepOwner) anOwner = Handle(StdSelect_BRepOwner)::DownCast (aSE->OwnerId()))
       {

src/AIS/AIS_Dimension.cxx

@@ -335,31 +335,31 @@ TCollection_ExtendedString AIS_Dimension::GetValueString (Standard_Real& theWidt
   if (myDrawer->DimensionAspect()->IsText3d())
   {
     // text width produced by BRepFont
-    Font_BRepFont aFont (aTextAspect->Aspect()->Font().ToCString(),
-                         aTextAspect->Aspect()->GetTextFontAspect(),
-                         aTextAspect->Height());
-
-    for (NCollection_Utf8Iter anIter = anUTFString.Iterator(); *anIter != 0; )
+    Font_BRepFont aFont;
+    if (aFont.FindAndInit (aTextAspect->Aspect()->Font(), aTextAspect->Aspect()->GetTextFontAspect(), aTextAspect->Height(), Font_StrictLevel_Any))
     {
-      Standard_Utf32Char aCurrChar = *anIter;
-      Standard_Utf32Char aNextChar = *(++anIter);
-      theWidth += aFont.AdvanceX (aCurrChar, aNextChar);
+      for (NCollection_Utf8Iter anIter = anUTFString.Iterator(); *anIter != 0; )
+      {
+        Standard_Utf32Char aCurrChar = *anIter;
+        Standard_Utf32Char aNextChar = *(++anIter);
+        theWidth += aFont.AdvanceX (aCurrChar, aNextChar);
+      }
     }
   }
   else
   {
     // Text width for 1:1 scale 2D case
-    Handle(Font_FTFont) aFont = new Font_FTFont();
-    aFont->Init (aTextAspect->Aspect()->Font().ToCString(),
-                 aTextAspect->Aspect()->GetTextFontAspect(),
-                 (const unsigned int)aTextAspect->Height(),
-                 THE_2D_TEXT_RESOLUTION);
-
-    for (NCollection_Utf8Iter anIter = anUTFString.Iterator(); *anIter != 0; )
+    Font_FTFontParams aFontParams;
+    aFontParams.PointSize  = (unsigned int )aTextAspect->Height();
+    aFontParams.Resolution = THE_2D_TEXT_RESOLUTION;
+    if (Handle(Font_FTFont) aFont = Font_FTFont::FindAndCreate (aTextAspect->Aspect()->Font(), aTextAspect->Aspect()->GetTextFontAspect(), aFontParams, Font_StrictLevel_Any))
     {
-      Standard_Utf32Char aCurrChar = *anIter;
-      Standard_Utf32Char aNextChar = *(++anIter);
-      theWidth += (Standard_Real) aFont->AdvanceX (aCurrChar, aNextChar);
+      for (NCollection_Utf8Iter anIter = anUTFString.Iterator(); *anIter != 0; )
+      {
+        Standard_Utf32Char aCurrChar = *anIter;
+        Standard_Utf32Char aNextChar = *(++anIter);
+        theWidth += (Standard_Real) aFont->AdvanceX (aCurrChar, aNextChar);
+      }
     }
   }
 

src/AIS/AIS_DragAction.hxx

@@ -1,5 +1,4 @@
-// Copyright (c) 1997-1999 Matra Datavision
-// Copyright (c) 1999-2014 OPEN CASCADE SAS
+// Copyright (c) 2018-2019 OPEN CASCADE SAS
 //
 // This file is part of Open CASCADE Technology software library.
 //
@@ -12,14 +11,16 @@
 // Alternatively, this file may be used under the terms of Open CASCADE
 // commercial license or contractual agreement.
 
-// math_Gauss.lxx 
-// lpa, le 28/01/92
+#ifndef _AIS_DragAction_HeaderFile
+#define _AIS_DragAction_HeaderFile
 
-inline Standard_Boolean math_Gauss::IsDone() const { return Done; }
-
-inline Standard_OStream& operator<<(Standard_OStream& o, const math_Gauss& mG) 
+//! Dragging action.
+enum AIS_DragAction
 {
-  mG.Dump(o);
-  return o;
-}
+  AIS_DragAction_Start,  //!< (try) start dragging object
+  AIS_DragAction_Update, //!< perform dragging (update position)
+  AIS_DragAction_Stop,   //!< stop dragging (save position)
+  AIS_DragAction_Abort,  //!< abort dragging (restore initial position)
+};
 
+#endif // _AIS_DragAction_HeaderFile

src/AIS/AIS_EqualDistanceRelation.hxx

@@ -17,32 +17,12 @@
 #ifndef _AIS_EqualDistanceRelation_HeaderFile
 #define _AIS_EqualDistanceRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <TopoDS_Shape.hxx>
-#include <gp_Pnt.hxx>
 #include <AIS_Relation.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-#include <Prs3d_Drawer.hxx>
-#include <Standard_Real.hxx>
-#include <Standard_Boolean.hxx>
-#include <DsgPrs_ArrowSide.hxx>
 #include <AIS_TypeOfDist.hxx>
-class TopoDS_Shape;
+#include <DsgPrs_ArrowSide.hxx>
+
 class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
-class TopoDS_Edge;
-class Bnd_Box;
-class gp_Pnt;
-class TopoDS_Vertex;
 
-
-class AIS_EqualDistanceRelation;
 DEFINE_STANDARD_HANDLE(AIS_EqualDistanceRelation, AIS_Relation)
 
 //! A framework to display equivalent distances between
@@ -52,10 +32,9 @@ DEFINE_STANDARD_HANDLE(AIS_EqualDistanceRelation, AIS_Relation)
 //! These distances are used to compare shapes by this vector alone.
 class AIS_EqualDistanceRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_EqualDistanceRelation,AIS_Relation)
 public:
 
-  
   //! Constructs a framework to display equivalent
   //! distances between the shapes aShape1, aShape2,
   //! aShape3, aShape4 and the plane aPlane.
@@ -105,19 +84,8 @@ public:
   //! a line or a circle.
   Standard_EXPORT static void ComputeOneEdgeOneVertexLength (const Handle(Prs3d_Presentation)& aPresentation, const Handle(Prs3d_Drawer)& aDrawer, const Standard_Real ArrowSize, const TopoDS_Shape& FirstShape, const TopoDS_Shape& SecondShape, const Handle(Geom_Plane)& Plane, const Standard_Boolean AutomaticPos, const Standard_Boolean IsSetBndBox, const Bnd_Box& BndBox, gp_Pnt& Position, gp_Pnt& FirstAttach, gp_Pnt& SecondAttach, gp_Pnt& FirstExtreme, gp_Pnt& SecondExtreme, DsgPrs_ArrowSide& SymbolPrs);
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_EqualDistanceRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -135,14 +103,8 @@ private:
   gp_Pnt myPoint3;
   gp_Pnt myPoint4;
 
-
 };
 
-
 #include <AIS_EqualDistanceRelation.lxx>
 
-
-
-
-
 #endif // _AIS_EqualDistanceRelation_HeaderFile

src/AIS/AIS_EqualRadiusRelation.hxx

@@ -17,31 +17,17 @@
 #ifndef _AIS_EqualRadiusRelation_HeaderFile
 #define _AIS_EqualRadiusRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
 #include <AIS_Relation.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Edge;
+
 class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_EqualRadiusRelation;
 DEFINE_STANDARD_HANDLE(AIS_EqualRadiusRelation, AIS_Relation)
 
-
 class AIS_EqualRadiusRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_EqualRadiusRelation, AIS_Relation)
 public:
 
-  
   //! Creates equal relation of two arc's radiuses.
   //! If one of edges is not in the given plane,
   //! the presentation method projects it onto the plane.
@@ -56,19 +42,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_EqualRadiusRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -82,13 +57,6 @@ private:
   gp_Pnt myFirstPoint;
   gp_Pnt mySecondPoint;
 
-
 };
 
-
-
-
-
-
-
 #endif // _AIS_EqualRadiusRelation_HeaderFile

src/AIS/AIS_FixRelation.hxx

@@ -17,32 +17,11 @@
 #ifndef _AIS_FixRelation_HeaderFile
 #define _AIS_FixRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
 #include <TopoDS_Wire.hxx>
-#include <gp_Pnt.hxx>
 #include <AIS_Relation.hxx>
-#include <Standard_Real.hxx>
-#include <Standard_Boolean.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
+
 class Geom_Plane;
-class TopoDS_Wire;
-class gp_Pnt;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
-class TopoDS_Vertex;
-class Geom_Curve;
-class TopoDS_Edge;
-class gp_Lin;
-class gp_Circ;
 
-
-class AIS_FixRelation;
 DEFINE_STANDARD_HANDLE(AIS_FixRelation, AIS_Relation)
 
 //! Constructs and manages a constraint by a fixed
@@ -55,9 +34,8 @@ DEFINE_STANDARD_HANDLE(AIS_FixRelation, AIS_Relation)
 //! object.
 class AIS_FixRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_FixRelation, AIS_Relation)
 public:
-
   
   //! initializes the vertex aShape, the
   //! plane aPlane and the wire aWire, which connects
@@ -98,16 +76,6 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_FixRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
   
@@ -141,11 +109,6 @@ private:
 
 };
 
-
 #include <AIS_FixRelation.lxx>
 
-
-
-
-
 #endif // _AIS_FixRelation_HeaderFile

src/AIS/AIS_IdenticRelation.hxx

@@ -17,21 +17,14 @@
 #ifndef _AIS_IdenticRelation_HeaderFile
 #define _AIS_IdenticRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <Standard_Boolean.hxx>
-#include <gp_Pnt.hxx>
 #include <AIS_Relation.hxx>
+#include <gp_Pnt.hxx>
 #include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
 #include <SelectMgr_Selection.hxx>
-#include <Standard_Real.hxx>
+#include <TColStd_ListOfTransient.hxx>
+
 class TopoDS_Shape;
 class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 class Geom_Line;
 class gp_Pnt;
 class Geom_Circle;
@@ -40,8 +33,6 @@ class TopoDS_Wire;
 class TopoDS_Vertex;
 class gp_Dir;
 
-
-class AIS_IdenticRelation;
 DEFINE_STANDARD_HANDLE(AIS_IdenticRelation, AIS_Relation)
 
 //! Constructs a constraint by a relation of identity

src/AIS/AIS_InteractiveContext.cxx

@@ -37,7 +37,6 @@
 #include <Prs3d_PlaneAspect.hxx>
 #include <Prs3d_PointAspect.hxx>
 #include <Prs3d_ShadingAspect.hxx>
-#include <PrsMgr_ModedPresentation.hxx>
 #include <PrsMgr_PresentableObject.hxx>
 #include <Quantity_Color.hxx>
 #include <SelectMgr_EntityOwner.hxx>
@@ -107,7 +106,6 @@ AIS_InteractiveContext::AIS_InteractiveContext(const Handle(V3d_Viewer)& MainVie
 myMainPM(new PrsMgr_PresentationManager3d(MainViewer->StructureManager())),
 myMainVwr(MainViewer),
 myMainSel(new StdSelect_ViewerSelector3d()),
-myWasLastMain(Standard_False),
 myToHilightSelected(Standard_True),
 mySelection(new AIS_Selection()),
 myFilters(new SelectMgr_OrFilter()),
@@ -426,8 +424,7 @@ void AIS_InteractiveContext::Display (const Handle(AIS_InteractiveObject)& theIO
   setContextToObject (theIObj);
   if (!myObjects.IsBound (theIObj))
   {
-    Handle(AIS_GlobalStatus) aStatus = new AIS_GlobalStatus (AIS_DS_Displayed, theDispMode, theSelectionMode);
-    myObjects.Bind   (theIObj, aStatus);
+    setObjectStatus (theIObj, AIS_DS_Displayed, theDispMode, theSelectionMode);
     myMainVwr->StructureManager()->RegisterObject (theIObj);
     myMainPM->Display(theIObj, theDispMode);
     if (theSelectionMode != -1)
@@ -504,8 +501,7 @@ void AIS_InteractiveContext::Load (const Handle(AIS_InteractiveObject)& theIObj,
   {
     Standard_Integer aDispMode, aHiMod, aSelModeDef;
     GetDefModes (theIObj, aDispMode, aHiMod, aSelModeDef);
-    Handle(AIS_GlobalStatus) aStatus = new AIS_GlobalStatus (AIS_DS_Erased, aDispMode, theSelMode != -1 ? theSelMode : aSelModeDef);
-    myObjects.Bind (theIObj, aStatus);
+    setObjectStatus (theIObj, AIS_DS_Erased, aDispMode, theSelMode != -1 ? theSelMode : aSelModeDef);
     myMainVwr->StructureManager()->RegisterObject (theIObj);
   }
 
@@ -756,7 +752,9 @@ Standard_Boolean AIS_InteractiveContext::IsHilighted (const Handle(SelectMgr_Ent
     return myObjects (anObj)->IsHilighted();
   }
 
-  return theOwner->IsSelected();
+  const Handle(Prs3d_Drawer)& aStyle = getSelStyle (anObj, theOwner);
+  const Standard_Integer aHiMode = getHilightMode (anObj, aStyle, -1);
+  return theOwner->IsHilighted (myMainPM, aHiMode);
 }
 
 //=======================================================================
@@ -952,7 +950,8 @@ void AIS_InteractiveContext::RecomputePrsOnly (const Handle(AIS_InteractiveObjec
     return;
   }
 
-  theIObj->Update (theAllModes);
+  theIObj->SetToUpdate();
+  theIObj->UpdatePresentations (theAllModes);
   if (!theToUpdateViewer)
   {
     return;
@@ -1006,13 +1005,7 @@ void AIS_InteractiveContext::Update (const Handle(AIS_InteractiveObject)& theIOb
     return;
   }
 
-  TColStd_ListOfInteger aPrsModes;
-  theIObj->ToBeUpdated (aPrsModes);
-  for (TColStd_ListIteratorOfListOfInteger aPrsModesIt (aPrsModes); aPrsModesIt.More(); aPrsModesIt.Next())
-  {
-    theIObj->Update (aPrsModesIt.Value(), Standard_False);
-  }
-
+  theIObj->UpdatePresentations();
   mgrSelector->Update(theIObj);
 
   if (theUpdateViewer)
@@ -1369,63 +1362,6 @@ void AIS_InteractiveContext::SetCurrentFacingModel (const Handle(AIS_Interactive
   }
 }
 
-//=======================================================================
-//function : redisplayPrsRecModes
-//purpose  :
-//=======================================================================
-void AIS_InteractiveContext::redisplayPrsRecModes (const Handle(AIS_InteractiveObject)& theIObj,
-                                                   const Standard_Boolean               theToUpdateViewer)
-{
-  if (theIObj->RecomputeEveryPrs())
-  {
-    theIObj->Update (Standard_True);
-    theIObj->UpdateSelection();
-  }
-  else
-  {
-    for (TColStd_ListIteratorOfListOfInteger aModes (theIObj->ListOfRecomputeModes()); aModes.More(); aModes.Next())
-    {
-      theIObj->Update (aModes.Value(), Standard_False);
-    }
-    theIObj->UpdateSelection();
-    theIObj->SetRecomputeOk();
-  }
-
-  if (theToUpdateViewer)
-  {
-    UpdateCurrentViewer();
-  }
-}
-
-//=======================================================================
-//function : redisplayPrsModes
-//purpose  :
-//=======================================================================
-void AIS_InteractiveContext::redisplayPrsModes (const Handle(AIS_InteractiveObject)& theIObj,
-                                                const Standard_Boolean               theToUpdateViewer)
-{
-  if (theIObj->RecomputeEveryPrs())
-  {
-    theIObj->Update (Standard_True);
-    theIObj->UpdateSelection();
-  }
-  else
-  {
-    TColStd_ListOfInteger aModes;
-    theIObj->ToBeUpdated (aModes);
-    for (TColStd_ListIteratorOfListOfInteger aModeIter (aModes); aModeIter.More(); aModeIter.Next())
-    {
-      theIObj->Update (aModeIter.Value(), Standard_False);
-    }
-    theIObj->SetRecomputeOk();
-  }
-
-  if (theToUpdateViewer)
-  {
-    UpdateCurrentViewer();
-  }
-}
-
 //=======================================================================
 //function : SetColor
 //purpose  :
@@ -1441,7 +1377,11 @@ void AIS_InteractiveContext::SetColor (const Handle(AIS_InteractiveObject)& theI
 
   setContextToObject (theIObj);
   theIObj->SetColor (theColor);
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
+  theIObj->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1486,7 +1426,11 @@ void AIS_InteractiveContext::SetDeviationCoefficient (const Handle(AIS_Interacti
 
   Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast (theIObj);
   aShape->SetOwnDeviationCoefficient (theCoefficient);
-  redisplayPrsModes (theIObj, theToUpdateViewer);
+  aShape->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1516,7 +1460,11 @@ void AIS_InteractiveContext::SetHLRDeviationCoefficient (const Handle(AIS_Intera
 
   Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast (theIObj);
   aShape->SetOwnHLRDeviationCoefficient (theCoefficient);
-  redisplayPrsModes (theIObj, theToUpdateViewer);
+  aShape->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1545,7 +1493,11 @@ void AIS_InteractiveContext::SetDeviationAngle (const Handle(AIS_InteractiveObje
 
   Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast (theIObj);
   aShape->SetOwnDeviationAngle (theAngle);
-  redisplayPrsModes (theIObj, theToUpdateViewer);
+  aShape->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1574,15 +1526,10 @@ void AIS_InteractiveContext::SetAngleAndDeviation (const Handle(AIS_InteractiveO
 
   Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast (theIObj);
   aShape->SetAngleAndDeviation (theAngle);
-
-  if (theIObj->RecomputeEveryPrs())
+  aShape->UpdatePresentations();
+  if (theToUpdateViewer)
   {
-    theIObj->Update (Standard_True);
-    theIObj->UpdateSelection();
-  }
-  else
-  {
-    Update (theIObj, theToUpdateViewer);
+    UpdateCurrentViewer();
   }
 }
 
@@ -1611,7 +1558,11 @@ void AIS_InteractiveContext::SetHLRAngleAndDeviation (const Handle(AIS_Interacti
   }
   Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast (theIObj);
   aShape->SetHLRAngleAndDeviation (theAngle);
-  redisplayPrsModes (theIObj, theToUpdateViewer);
+  aShape->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1639,7 +1590,11 @@ void AIS_InteractiveContext::SetHLRDeviationAngle (const Handle(AIS_InteractiveO
   }
   Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast (theIObj);
   aShape->SetOwnHLRDeviationAngle (theAngle);
-  redisplayPrsModes (theIObj, theToUpdateViewer);
+  aShape->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1655,7 +1610,11 @@ void AIS_InteractiveContext::UnsetColor (const Handle(AIS_InteractiveObject)& th
   }
 
   theIObj->UnsetColor();
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
+  theIObj->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1701,23 +1660,27 @@ void AIS_InteractiveContext::SetWidth (const Handle(AIS_InteractiveObject)& theI
 
   setContextToObject (theIObj);
   theIObj->SetWidth (theWidth);
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
-  if (!myLastinMain.IsNull() && myLastinMain->IsSameSelectable (theIObj))
+  theIObj->UpdatePresentations();
+  if (!myLastPicked.IsNull() && myLastPicked->IsSameSelectable (theIObj))
   {
-    if (myLastinMain->IsAutoHilight())
+    if (myLastPicked->IsAutoHilight())
     {
       const Standard_Integer aHiMode = theIObj->HasHilightMode() ? theIObj->HilightMode() : 0;
-      myLastinMain->HilightWithColor (myMainPM,
-                                      myLastinMain->IsSelected() ? getSelStyle (theIObj, myLastinMain) : getHiStyle (theIObj, myLastinMain),
+      myLastPicked->HilightWithColor (myMainPM,
+                                      myLastPicked->IsSelected() ? getSelStyle (theIObj, myLastPicked) : getHiStyle (theIObj, myLastPicked),
                                       aHiMode);
     }
     else
     {
       theIObj->HilightOwnerWithColor (myMainPM,
-                                      myLastinMain->IsSelected() ? getSelStyle (theIObj, myLastinMain) : getHiStyle (theIObj, myLastinMain),
-                                      myLastinMain);
+                                      myLastPicked->IsSelected() ? getSelStyle (theIObj, myLastPicked) : getHiStyle (theIObj, myLastPicked),
+                                      myLastPicked);
     }
   }
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1733,7 +1696,11 @@ void AIS_InteractiveContext::UnsetWidth (const Handle(AIS_InteractiveObject)& th
   }
 
   theIObj->UnsetWidth();
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
+  theIObj->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1751,7 +1718,11 @@ void AIS_InteractiveContext::SetMaterial (const Handle(AIS_InteractiveObject)& t
 
   setContextToObject (theIObj);
   theIObj->SetMaterial (theMaterial);
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
+  theIObj->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1766,7 +1737,11 @@ void AIS_InteractiveContext::UnsetMaterial (const Handle(AIS_InteractiveObject)&
     return;
   }
   theIObj->UnsetMaterial();
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
+  theIObj->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1796,7 +1771,11 @@ void AIS_InteractiveContext::SetTransparency (const Handle(AIS_InteractiveObject
   }
 
   theIObj->SetTransparency (theValue);
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
+  theIObj->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1812,7 +1791,11 @@ void AIS_InteractiveContext::UnsetTransparency (const Handle(AIS_InteractiveObje
   }
 
   theIObj->UnsetTransparency();
-  redisplayPrsRecModes (theIObj, theToUpdateViewer);
+  theIObj->UpdatePresentations();
+  if (theToUpdateViewer)
+  {
+    UpdateCurrentViewer();
+  }
 }
 
 //=======================================================================
@@ -1822,6 +1805,7 @@ void AIS_InteractiveContext::UnsetTransparency (const Handle(AIS_InteractiveObje
 void AIS_InteractiveContext::SetSelectedAspect (const Handle(Prs3d_BasicAspect)& theAspect,
                                                 const Standard_Boolean           theToUpdateViewer)
 {
+  Standard_DISABLE_DEPRECATION_WARNINGS
   Standard_Boolean isFound = Standard_False;
   for (AIS_NListOfEntityOwner::Iterator aSelIter (mySelection->Objects()); aSelIter.More(); aSelIter.Next())
   {
@@ -1829,6 +1813,7 @@ void AIS_InteractiveContext::SetSelectedAspect (const Handle(Prs3d_BasicAspect)&
     Handle(AIS_InteractiveObject) anObj = Handle(AIS_InteractiveObject)::DownCast (aSelIter.Value()->Selectable());
     anObj->SetAspect (theAspect);
   }
+  Standard_ENABLE_DEPRECATION_WARNINGS
 
   if (isFound && theToUpdateViewer)
   {
@@ -1951,42 +1936,18 @@ void AIS_InteractiveContext::GetDefModes (const Handle(AIS_InteractiveObject)& t
 void AIS_InteractiveContext::EraseGlobal (const Handle(AIS_InteractiveObject)& theIObj,
                                           const Standard_Boolean               theToUpdateviewer)
 {
+  Handle(AIS_GlobalStatus) aStatus;
   if (theIObj.IsNull()
-  || !myObjects.IsBound (theIObj))
+  || !myObjects.Find (theIObj, aStatus)
+  ||  aStatus->GraphicStatus() == AIS_DS_Erased)
   {
     return;
   }
 
-  Handle(AIS_GlobalStatus) aStatus = myObjects (theIObj);
-
   const Standard_Integer aDispMode = theIObj->HasHilightMode() ? theIObj->HilightMode() : 0;
-  if (aStatus->GraphicStatus() == AIS_DS_Erased)
-  {
-    return;
-  }
-
-  if (aStatus->IsHilighted())
-  {
-    Standard_DISABLE_DEPRECATION_WARNINGS
-    if (IsCurrent (theIObj))
-    {
-      AddOrRemoveCurrentObject (theIObj, Standard_False);
-    }
-    else if (myMainPM->IsHighlighted (theIObj, aStatus->DisplayMode()))
-    {
-      unhighlightGlobal (theIObj);
-    }
-    Standard_ENABLE_DEPRECATION_WARNINGS
-  }
-
+  unhighlightOwners (theIObj);
   myMainPM->SetVisibility (theIObj, aStatus->DisplayMode(), Standard_False);
 
-  if (aStatus->IsHilighted()
-   && theIObj->HasHilightMode())
-  {
-    unhighlightGlobal (theIObj);
-  }
-
   if (!myLastPicked.IsNull()
     && myLastPicked->IsSameSelectable (theIObj))
   {
@@ -2042,8 +2003,9 @@ void AIS_InteractiveContext::unhighlightOwners (const Handle(AIS_InteractiveObje
 void AIS_InteractiveContext::ClearGlobal (const Handle(AIS_InteractiveObject)& theIObj,
                                           const Standard_Boolean               theToUpdateviewer)
 {
+  Handle(AIS_GlobalStatus) aStatus;
   if (theIObj.IsNull()
-  || !myObjects.IsBound (theIObj))
+  || !myObjects.Find (theIObj, aStatus))
   {
     // for cases when reference shape of connected interactives was not displayed
     // but its selection primitives were calculated
@@ -2052,7 +2014,6 @@ void AIS_InteractiveContext::ClearGlobal (const Handle(AIS_InteractiveObject)& t
     return;
   }
 
-  Handle(AIS_GlobalStatus) aStatus = myObjects (theIObj);
   unhighlightOwners (theIObj);
 
   myMainPM->Erase (theIObj, -1);
@@ -2093,7 +2054,7 @@ void AIS_InteractiveContext::ClearGlobal (const Handle(AIS_InteractiveObject)& t
   const Handle(SelectMgr_SelectableObject)& anObj = theIObj; // to avoid ambiguity
   mgrSelector->Remove (anObj);
 
-  myObjects.UnBind (theIObj);
+  setObjectStatus (theIObj, AIS_DS_None, -1, -1);
   myMainVwr->StructureManager()->UnregisterObject (theIObj);
 
   for (V3d_ListOfViewIterator aDefViewIter (myMainVwr->DefinedViewIterator()); aDefViewIter.More(); aDefViewIter.Next())
@@ -2101,13 +2062,11 @@ void AIS_InteractiveContext::ClearGlobal (const Handle(AIS_InteractiveObject)& t
     aDefViewIter.Value()->View()->ChangeHiddenObjects()->Remove (theIObj.get());
   }
 
-  if (!myLastinMain.IsNull())
+  if (!myLastPicked.IsNull())
   {
-    if (myLastinMain->IsSameSelectable (theIObj)
-     || myLastPicked->IsSameSelectable(theIObj))
+    if (myLastPicked->IsSameSelectable (theIObj))
     {
       clearDynamicHighlight();
-      myLastinMain.Nullify();
       myLastPicked.Nullify();
     }
   }
@@ -2161,15 +2120,12 @@ Standard_Boolean AIS_InteractiveContext::ClearDetected (Standard_Boolean theToRe
   myCurDetected = 0;
   myCurHighlighted = 0;
   myDetectedSeq.Clear();
-  myLastPicked  = myLastinMain;
-  myWasLastMain = Standard_True;
   Standard_Boolean toUpdate = Standard_False;
   if (!myLastPicked.IsNull() && myLastPicked->HasSelectable())
   {
     toUpdate = Standard_True;
     clearDynamicHighlight();
   }
-  myLastinMain.Nullify();
   myLastPicked.Nullify();
   myMainSel->ClearPicked();
   if (toUpdate && theToRedrawImmediate)
@@ -2460,6 +2416,13 @@ void AIS_InteractiveContext::Disconnect (const Handle(AIS_InteractiveObject)& th
   {
     Handle(AIS_MultipleConnectedInteractive) theObj (Handle(AIS_MultipleConnectedInteractive)::DownCast (theAssembly));
     theObj->Disconnect (theObjToDisconnect);
+    if (!myObjects.IsBound (theObjToDisconnect))
+    {
+      // connected presentation might contain displayed presentations
+      myMainPM->Erase (theObjToDisconnect, -1);
+      theObjToDisconnect->ErasePresentations (true);
+    }
+
     const Handle(SelectMgr_SelectableObject)& anObj = theObjToDisconnect; // to avoid ambiguity
     mgrSelector->Remove (anObj);
   }
@@ -2559,3 +2522,38 @@ void AIS_InteractiveContext::SetTransformPersistence (const Handle(AIS_Interacti
     anActiveViewIter.Value()->View()->InvalidateZLayerBoundingBox (aLayerId);
   }
 }
+
+//=======================================================================
+//function : GravityPoint
+//purpose  :
+//=======================================================================
+gp_Pnt AIS_InteractiveContext::GravityPoint (const Handle(V3d_View)& theView) const
+{
+  return theView->GravityPoint();
+}
+//=======================================================================
+//function : setObjectStatus
+//purpose  :
+//=======================================================================
+void AIS_InteractiveContext::setObjectStatus (const Handle(AIS_InteractiveObject)& theIObj,
+                                              const AIS_DisplayStatus theStatus,
+                                              const Standard_Integer theDispMode,
+                                              const Standard_Integer theSelectionMode)
+{
+  if (theStatus != AIS_DS_None)
+  {
+    Handle(AIS_GlobalStatus) aStatus = new AIS_GlobalStatus (AIS_DS_Displayed, theDispMode, theSelectionMode);
+    myObjects.Bind (theIObj, aStatus);
+  }
+  else
+    myObjects.UnBind (theIObj);
+
+  for (PrsMgr_ListOfPresentableObjectsIter aPrsIter (theIObj->Children()); aPrsIter.More(); aPrsIter.Next())
+  {
+    Handle(AIS_InteractiveObject) aChild (Handle(AIS_InteractiveObject)::DownCast (aPrsIter.Value()));
+    if (aChild.IsNull())
+      continue;
+
+    setObjectStatus (aChild, theStatus, theDispMode, theSelectionMode);
+  }
+}

src/AIS/AIS_InteractiveContext.hxx

@@ -454,6 +454,7 @@ public: //! @name iteration through detected entities
 public: //! @name Selection management
 
   //! Sets the graphic basic aspect to the current presentation of ALL selected objects.
+  Standard_DEPRECATED ("Deprecated method - presentation attributes should be assigned directly to object")
   Standard_EXPORT void SetSelectedAspect (const Handle(Prs3d_BasicAspect)& theAspect,
                                           const Standard_Boolean           theToUpdateViewer);
 
@@ -556,6 +557,14 @@ public: //! @name Selection management
   Standard_EXPORT void AddOrRemoveSelected (const Handle(AIS_InteractiveObject)& theObject,
                                             const Standard_Boolean               theToUpdateViewer);
 
+  //! Updates Selected state of specified owner without calling HilightSelected().
+  //! Has no effect if Selected state is not changed, and redirects to AddOrRemoveSelected() otherwise.
+  //! @param theOwner owner object to set selected state
+  //! @param theIsSelected new selected state
+  //! @return TRUE if Selected state has been changed
+  Standard_EXPORT Standard_Boolean SetSelectedState (const Handle(SelectMgr_EntityOwner)& theOwner,
+                                                     const Standard_Boolean               theIsSelected);
+
   //! Highlights selected objects.
   Standard_EXPORT void HilightSelected (const Standard_Boolean theToUpdateViewer);
 
@@ -815,6 +824,9 @@ public: //! @name common properties
   //! returns the number of removed  structures from the viewers.
   Standard_EXPORT Standard_Integer PurgeDisplay();
 
+  //! Return rotation gravity point.
+  Standard_EXPORT virtual gp_Pnt GravityPoint (const Handle(V3d_View)& theView) const;
+
 public: //! @name debug visualization
 
   //! Visualization of sensitives - for debugging purposes!
@@ -1082,6 +1094,7 @@ public: //! @name iso-line display attributes
   //! Returns true if drawing isolines on triangulation algorithm is enabled.
   Standard_EXPORT Standard_Boolean IsoOnTriangulation() const;
 
+//! @name obsolete methods
 public:
 
   //! Updates the view of the current object in open context.
@@ -1207,14 +1220,6 @@ protected: //! @name internal methods
   Standard_EXPORT void InitAttributes();
   
   Standard_EXPORT Standard_Integer PurgeViewer (const Handle(V3d_Viewer)& Vwr);
-  
-  //! UNKNOWN
-  Standard_EXPORT void redisplayPrsModes (const Handle(AIS_InteractiveObject)& theIObj,
-                                          const Standard_Boolean               theToUpdateViewer);
-  
-  //! UNKNOWN
-  Standard_EXPORT void redisplayPrsRecModes (const Handle(AIS_InteractiveObject)& theIObj,
-                                             const Standard_Boolean               theToUpdateViewer);
 
   //! Helper function to unhighlight all entity owners currently highlighted with seleciton color.
   Standard_EXPORT void unhighlightOwners (const Handle(AIS_InteractiveObject)& theObject);
@@ -1346,19 +1351,27 @@ protected: //! @name internal methods
   //! Removes dynamic highlight draw
   void clearDynamicHighlight() const
   {
-    if (myLastinMain.IsNull())
+    if (myLastPicked.IsNull())
       return;
 
-    if (myLastinMain->IsAutoHilight())
+    if (myLastPicked->IsAutoHilight())
     {
       myMainPM->ClearImmediateDraw();
     }
     else
     {
-      myLastinMain->Selectable()->ClearDynamicHighlight (myMainPM);
+      myLastPicked->Selectable()->ClearDynamicHighlight (myMainPM);
     }
   }
 
+  //! Bind/Unbind status to object and its children
+  //! @param theObj [in] the object to change status
+  //! @param theStatus status, if NULL, unbind object
+  Standard_EXPORT void setObjectStatus (const Handle(AIS_InteractiveObject)& theIObj,
+                                        const AIS_DisplayStatus theStatus,
+                                        const Standard_Integer theDispyMode,
+                                        const Standard_Integer theSelectionMode);
+
 protected: //! @name internal fields
 
   AIS_DataMapOfIOStatus myObjects;
@@ -1367,8 +1380,6 @@ protected: //! @name internal fields
   Handle(V3d_Viewer) myMainVwr;
   Handle(StdSelect_ViewerSelector3d) myMainSel;
   Handle(SelectMgr_EntityOwner) myLastPicked;
-  Handle(SelectMgr_EntityOwner) myLastinMain;
-  Standard_Boolean myWasLastMain;
   Standard_Boolean myToHilightSelected;
   Handle(AIS_Selection) mySelection;
   Handle(SelectMgr_OrFilter) myFilters;

src/AIS/AIS_InteractiveContext_1.cxx

@@ -30,7 +30,7 @@
 #include <Prs3d_LineAspect.hxx>
 #include <Prs3d_Presentation.hxx>
 #include <Quantity_Color.hxx>
-#include <SelectBasics_SensitiveEntity.hxx>
+#include <Select3D_SensitiveEntity.hxx>
 #include <SelectMgr_EntityOwner.hxx>
 #include <SelectMgr_Filter.hxx>
 #include <SelectMgr_OrFilter.hxx>
@@ -184,7 +184,6 @@ void AIS_InteractiveContext::unhighlightSelected (const Standard_Boolean theIsTo
     {
       anObjToClear.Add (anInteractive);
     }
-    anOwner->SetSelected (Standard_False);
     if (anOwner == anInteractive->GlobalSelOwner())
     {
       myObjects.ChangeFind (anInteractive)->SetHilightStatus (Standard_False);
@@ -328,8 +327,6 @@ AIS_StatusOfDetection AIS_InteractiveContext::MoveTo (const Standard_Integer  th
   myDetectedSeq.Clear();
 
   // preliminaires
-  myLastPicked  = myLastinMain;
-  myWasLastMain = Standard_True;
   AIS_StatusOfDetection aStatus        = AIS_SOD_Nothing;
   Standard_Boolean      toUpdateViewer = Standard_False;
 
@@ -399,7 +396,6 @@ AIS_StatusOfDetection AIS_InteractiveContext::MoveTo (const Standard_Integer  th
 
     // initialize myLastPicked field with currently detected object
     myLastPicked = aNewPickedOwner;
-    myLastinMain = myLastPicked;
 
     // highlight detected object if it is not selected or myToHilightSelected flag is true
     if (myLastPicked->HasSelectable())
@@ -440,7 +436,6 @@ AIS_StatusOfDetection AIS_InteractiveContext::MoveTo (const Standard_Integer  th
       toUpdateViewer = Standard_True;
     }
 
-    myLastinMain.Nullify();
     myLastPicked.Nullify();
   }
 
@@ -500,7 +495,6 @@ AIS_StatusOfPick AIS_InteractiveContext::Select (const Standard_Integer  theXPMi
   // all objects detected by the selector are taken, previous current objects are emptied,
   // new objects are put...
   ClearSelected (Standard_False);
-  myWasLastMain = Standard_True;
   myMainSel->Pick (theXPMin, theYPMin, theXPMax, theYPMax, theView);
   for (Standard_Integer aPickIter = 1; aPickIter <= myMainSel->NbPicked(); ++aPickIter)
   {
@@ -509,7 +503,6 @@ AIS_StatusOfPick AIS_InteractiveContext::Select (const Standard_Integer  theXPMi
       continue;
 
     mySelection->Select (aCurOwner);
-    aCurOwner->SetSelected (Standard_True);
   }
 
   if (myAutoHilight)
@@ -541,7 +534,6 @@ AIS_StatusOfPick AIS_InteractiveContext::Select (const TColgp_Array1OfPnt2d& the
   // all objects detected by the selector are taken, previous current objects are emptied,
   // new objects are put...
   ClearSelected (Standard_False);
-  myWasLastMain = Standard_True;
   myMainSel->Pick (thePolyline, theView);
   for (Standard_Integer aPickIter = 1; aPickIter <= myMainSel->NbPicked(); ++aPickIter)
   {
@@ -550,7 +542,6 @@ AIS_StatusOfPick AIS_InteractiveContext::Select (const TColgp_Array1OfPnt2d& the
       continue;
 
     mySelection->Select (anOwner);
-    anOwner->SetSelected (Standard_True);
   }
 
   if (myAutoHilight)
@@ -572,17 +563,17 @@ AIS_StatusOfPick AIS_InteractiveContext::Select (const TColgp_Array1OfPnt2d& the
 //=======================================================================
 AIS_StatusOfPick AIS_InteractiveContext::Select (const Standard_Boolean toUpdateViewer)
 {
-  if (myWasLastMain && !myLastinMain.IsNull())
+  if (!myLastPicked.IsNull())
   {
     if (myAutoHilight)
     {
       clearDynamicHighlight();
     }
-    if (!myLastinMain->IsSelected()
-      || myLastinMain->IsForcedHilight()
+    if (!myLastPicked->IsSelected()
+      || myLastPicked->IsForcedHilight()
       || NbSelected() > 1)
     {
-      SetSelected (myLastinMain, Standard_False);
+      SetSelected (myLastPicked, Standard_False);
       if(toUpdateViewer)
       {
         UpdateCurrentViewer();
@@ -611,9 +602,9 @@ AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect (const Standard_Boolean toU
   {
     clearDynamicHighlight();
   }
-  if (myWasLastMain && !myLastinMain.IsNull())
+  if (!myLastPicked.IsNull())
   {
-    AddOrRemoveSelected (myLastinMain, toUpdateViewer);
+    AddOrRemoveSelected (myLastPicked, toUpdateViewer);
   }
 
   Standard_Integer aSelNum = NbSelected();
@@ -643,7 +634,6 @@ AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect (const Standard_Integer the
   {
     UnhilightSelected (Standard_False);
   }
-  myWasLastMain = Standard_True;
   myMainSel->Pick (theXPMin, theYPMin, theXPMax, theYPMax, theView);
   for (Standard_Integer aPickIter = 1; aPickIter <= myMainSel->NbPicked(); ++aPickIter)
   {
@@ -651,8 +641,7 @@ AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect (const Standard_Integer the
     if (anOwner.IsNull() || !anOwner->HasSelectable() || !myFilters->IsOk (anOwner))
       continue;
 
-    AIS_SelectStatus aSelStatus = mySelection->Select (anOwner);
-    anOwner->SetSelected (aSelStatus == AIS_SS_Added);
+    mySelection->Select (anOwner);
   }
 
   if (myAutoHilight)
@@ -685,7 +674,6 @@ AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect (const TColgp_Array1OfPnt2d
   {
     UnhilightSelected (Standard_False);
   }
-  myWasLastMain = Standard_True;
   myMainSel->Pick (thePolyline, theView);
   for (Standard_Integer aPickIter = 1; aPickIter <= myMainSel->NbPicked(); ++aPickIter)
   {
@@ -693,8 +681,7 @@ AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect (const TColgp_Array1OfPnt2d
     if (anOwner.IsNull() || !anOwner->HasSelectable() || !myFilters->IsOk (anOwner))
       continue;
 
-    AIS_SelectStatus aSelStatus = mySelection->Select (anOwner);
-    anOwner->SetSelected (aSelStatus == AIS_SS_Added);
+    mySelection->Select (anOwner);
   }
 
   if (myAutoHilight)
@@ -729,7 +716,6 @@ void AIS_InteractiveContext::HilightSelected (const Standard_Boolean theToUpdate
       aState->SetHilightStatus (Standard_True);
       aState->SetHilightStyle (anObjSelStyle);
     }
-    anOwner->SetSelected (Standard_True);
     if (!anOwner->IsAutoHilight())
     {
       NCollection_Handle<SelectMgr_SequenceOfOwner> aSeq;
@@ -779,7 +765,6 @@ void AIS_InteractiveContext::UnhilightSelected (const Standard_Boolean theToUpda
       myObjects.ChangeFind (anObj)->SetHilightStatus (Standard_False);
     }
 
-    anOwner->SetSelected (Standard_False);
     anOwner->Unhilight (myMainPM);
   }
 
@@ -801,13 +786,6 @@ void AIS_InteractiveContext::ClearSelected (const Standard_Boolean theToUpdateVi
   {
     unhighlightSelected();
   }
-  else
-  {
-    for (AIS_NListOfEntityOwner::Iterator aSelIter (mySelection->Objects()); aSelIter.More(); aSelIter.Next())
-    {
-      aSelIter.Value()->SetSelected (Standard_False);
-    }
-  }
 
   mySelection->Clear();
   if (myAutoHilight)
@@ -833,7 +811,7 @@ void AIS_InteractiveContext::SetSelected (const Handle(AIS_InteractiveObject)& t
 
   if (!myObjects.IsBound (theObject))
   {
-    Display (theObject, Standard_False);
+    return;
   }
 
   Handle(SelectMgr_EntityOwner) anOwner = theObject->GlobalSelOwner();
@@ -869,7 +847,6 @@ void AIS_InteractiveContext::SetSelected (const Handle(AIS_InteractiveObject)& t
     {
       Unhilight (aSelectable, Standard_False);
     }
-    aSelOwner->SetSelected (Standard_False);
     if (aSelOwner == aSelectable->GlobalSelOwner())
     {
       myObjects.ChangeFind (aSelectable)->SetHilightStatus (Standard_False);
@@ -894,7 +871,6 @@ void AIS_InteractiveContext::SetSelected (const Handle(AIS_InteractiveObject)& t
       HilightWithColor (theObject, anObjSelStyle, Standard_False);
     }
   }
-  anOwner->SetSelected (Standard_True);
 
   if (theToUpdateViewer)
     UpdateCurrentViewer();
@@ -927,7 +903,7 @@ void AIS_InteractiveContext::SetSelected (const Handle(SelectMgr_EntityOwner)& t
   }
 
   if (!myObjects.IsBound (anObject))
-    Display (anObject, Standard_False);
+    return;
 
   if (myAutoHilight)
   {
@@ -941,12 +917,10 @@ void AIS_InteractiveContext::SetSelected (const Handle(SelectMgr_EntityOwner)& t
     if (!HighlightStyle (theOwner, aCustomStyle) ||
       (!aCustomStyle.IsNull() && aCustomStyle != anObjSelStyle))
     {
-      theOwner->SetSelected (Standard_True);
       highlightSelected (theOwner);
     }
   }
 
-  theOwner->SetSelected (Standard_True);
   if (myAutoHilight && theOwner == anObject->GlobalSelOwner())
   {
     Handle(AIS_GlobalStatus)& aState = myObjects.ChangeFind (anObject);
@@ -995,8 +969,7 @@ void AIS_InteractiveContext::AddOrRemoveSelected (const Handle(SelectMgr_EntityO
   if (!myFilters->IsOk(theOwner) && !theOwner->IsSelected())
     return;
 
-  AIS_SelectStatus aSelStat = mySelection->Select (theOwner);
-  theOwner->SetSelected (aSelStat == AIS_SS_Added);
+  mySelection->Select (theOwner);
 
   if (myAutoHilight)
   {
@@ -1031,6 +1004,43 @@ void AIS_InteractiveContext::AddOrRemoveSelected (const Handle(SelectMgr_EntityO
     UpdateCurrentViewer();
 }
 
+// =======================================================================
+// function : SetSelectedState
+// purpose  :
+// =======================================================================
+Standard_Boolean AIS_InteractiveContext::SetSelectedState (const Handle(SelectMgr_EntityOwner)& theEntity,
+                                                           const Standard_Boolean theIsSelected)
+{
+  if (theEntity.IsNull())
+  {
+    throw Standard_ProgramError ("Internal error: AIS_InteractiveContext::SetSelectedState() called with NO object");
+  }
+
+  if (!theEntity->HasSelectable()
+    || mySelection->IsSelected (theEntity) == theIsSelected)
+  {
+    return false;
+  }
+
+  if (theEntity->IsAutoHilight())
+  {
+    AddOrRemoveSelected (theEntity, false);
+    return true;
+  }
+
+  if (theIsSelected)
+  {
+    const AIS_SelectStatus aSelStatus = mySelection->AddSelect (theEntity);
+    theEntity->SetSelected (true);
+    return aSelStatus == AIS_SS_Added;
+  }
+  else
+  {
+    const AIS_SelectStatus aSelStatus = mySelection->Select (theEntity);
+    theEntity->SetSelected (false);
+    return aSelStatus == AIS_SS_Removed;
+  }
+}
 
 //=======================================================================
 //function : IsSelected
@@ -1144,9 +1154,9 @@ void AIS_InteractiveContext::EntityOwners(Handle(SelectMgr_IndexedMapOfOwner)& t
 
     for (NCollection_Vector<Handle(SelectMgr_SensitiveEntity)>::Iterator aSelEntIter (aSel->Entities()); aSelEntIter.More(); aSelEntIter.Next())
     {
-      if (Handle(SelectBasics_SensitiveEntity) aEntity = aSelEntIter.Value()->BaseSensitive())
+      if (Handle(Select3D_SensitiveEntity) aEntity = aSelEntIter.Value()->BaseSensitive())
       {
-        if (Handle(SelectMgr_EntityOwner) aOwner = Handle(SelectMgr_EntityOwner)::DownCast(aEntity->OwnerId()))
+        if (const Handle(SelectMgr_EntityOwner)& aOwner = aEntity->OwnerId())
         {
           theOwners->Add (aOwner);
         }
@@ -1201,7 +1211,6 @@ Standard_Integer AIS_InteractiveContext::HilightNextDetected (const Handle(V3d_V
 
   highlightWithColor (anOwner, theView->Viewer());
   myLastPicked = anOwner;
-  myLastinMain = myLastPicked;
 
   if (theToRedrawImmediate)
   {
@@ -1237,7 +1246,6 @@ Standard_Integer AIS_InteractiveContext::HilightPreviousDetected (const Handle(V
 
   highlightWithColor (anOwner, theView->Viewer());
   myLastPicked = anOwner;
-  myLastinMain = myLastPicked;
 
   if (theToRedrawImmediate)
   {

src/AIS/AIS_InteractiveContext_2.cxx

@@ -419,7 +419,7 @@ Standard_Boolean AIS_InteractiveContext::ImmediateAdd (const Handle(AIS_Interact
     return Standard_False;
   }
 
-  myMainPM->AddToImmediateList (myMainPM->Presentation (theObj, theMode)->Presentation());
+  myMainPM->AddToImmediateList (myMainPM->Presentation (theObj, theMode));
   return Standard_True;
 }
 

src/AIS/AIS_InteractiveObject.cxx

@@ -16,32 +16,20 @@
 
 #include <AIS_InteractiveObject.hxx>
 
-#include <AIS_GraphicTool.hxx>
 #include <AIS_InteractiveContext.hxx>
-#include <Aspect_PolygonOffsetMode.hxx>
-#include <Bnd_Box.hxx>
 #include <Graphic3d_AspectFillArea3d.hxx>
 #include <Graphic3d_AspectLine3d.hxx>
 #include <Graphic3d_AspectMarker3d.hxx>
 #include <Graphic3d_AspectText3d.hxx>
-#include <Graphic3d_BndBox4f.hxx>
 #include <Graphic3d_CStructure.hxx>
 #include <Graphic3d_Group.hxx>
-#include <Graphic3d_MaterialAspect.hxx>
 #include <Graphic3d_Structure.hxx>
-#include <Prs3d_BasicAspect.hxx>
 #include <Prs3d_LineAspect.hxx>
 #include <Prs3d_PointAspect.hxx>
 #include <Prs3d_Presentation.hxx>
-#include <Prs3d_Root.hxx>
 #include <Prs3d_ShadingAspect.hxx>
 #include <Prs3d_TextAspect.hxx>
-#include <PrsMgr_ModedPresentation.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Quantity_Color.hxx>
-#include <Standard_Transient.hxx>
-#include <Standard_Type.hxx>
-#include <TColStd_ListIteratorOfListOfInteger.hxx>
+#include <PrsMgr_PresentationManager.hxx>
 
 IMPLEMENT_STANDARD_RTTIEXT(AIS_InteractiveObject,SelectMgr_SelectableObject)
 
@@ -51,15 +39,9 @@ IMPLEMENT_STANDARD_RTTIEXT(AIS_InteractiveObject,SelectMgr_SelectableObject)
 //=======================================================================
 AIS_InteractiveObject::AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d)
 : SelectMgr_SelectableObject (aTypeOfPresentation3d),
-  myCTXPtr (NULL),
-  myOwnWidth (0.0),
-  myCurrentFacingModel (Aspect_TOFM_BOTH_SIDE),
-  myInfiniteState (Standard_False),
-  hasOwnColor (Standard_False),
-  hasOwnMaterial (Standard_False),
-  myRecomputeEveryPrs (Standard_True)
+  myCTXPtr (NULL)
 {
-  SetCurrentFacingModel();
+  //
 }
 
 //=======================================================================
@@ -74,30 +56,6 @@ void AIS_InteractiveObject::Redisplay (const Standard_Boolean AllModes)
   myCTXPtr->Redisplay (this, Standard_False, AllModes);
 }
 
-//=======================================================================
-//function : Type
-//purpose  : 
-//=======================================================================
-
-AIS_KindOfInteractive AIS_InteractiveObject::Type() const 
-{return AIS_KOI_None;}
-
-//=======================================================================
-//function : Signature
-//purpose  : 
-//=======================================================================
-
-Standard_Integer AIS_InteractiveObject::Signature() const 
-{return -1;}
-
-//=======================================================================
-//function : RecomputeEveryPrs
-//purpose  : 
-//=======================================================================
-
-Standard_Boolean  AIS_InteractiveObject::RecomputeEveryPrs() const 
-{return myRecomputeEveryPrs;}
-
 //=======================================================================
 //function : 
 //purpose  : 
@@ -125,274 +83,6 @@ void AIS_InteractiveObject::SetContext (const Handle(AIS_InteractiveContext)& th
   }
 }
 
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-Standard_Boolean AIS_InteractiveObject::HasOwner() const 
-{
-  return (!myOwner.IsNull());
-}
-
-
-
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::ClearOwner()
-{
-  myOwner.Nullify();
-}
-
-//=======================================================================
-//function : SetDisplayMode
-//purpose  :
-//=======================================================================
-void AIS_InteractiveObject::SetDisplayMode (const Standard_Integer theMode)
-{
-  if (AcceptDisplayMode (theMode))
-  {
-    myDrawer->SetDisplayMode (theMode);
-  }
-}
-
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::SetCurrentFacingModel(const Aspect_TypeOfFacingModel aModel) {
-  myCurrentFacingModel = aModel;
-}
-
-//=======================================================================
-//function : CurrentFacingModel
-//purpose  : 
-//=======================================================================
-
-Aspect_TypeOfFacingModel AIS_InteractiveObject::CurrentFacingModel() const {
-  return myCurrentFacingModel;
-}
-
-//=======================================================================
-//function : SetColor
-//purpose  : 
-//=======================================================================
-
-void AIS_InteractiveObject::SetColor(const Quantity_Color& theColor)
-{
-  myDrawer->SetColor (theColor);
-  hasOwnColor = Standard_True;
-}
-
-//=======================================================================
-//function : UnsetColor
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::UnsetColor()
-{
-  hasOwnColor = Standard_False;
-}
-
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::SetWidth(const Standard_Real aValue)
-{
-  myOwnWidth = aValue;
-}
-
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::UnsetWidth()
-{
-  myOwnWidth = 0.;
-}
-
-//=======================================================================
-//function : Material
-//purpose  :
-//=======================================================================
-Graphic3d_NameOfMaterial AIS_InteractiveObject::Material() const
-{
-  return myDrawer->ShadingAspect()->Material().Name();
-}
-
-//=======================================================================
-//function : SetMaterial
-//purpose  :
-//=======================================================================
-void AIS_InteractiveObject::SetMaterial (const Graphic3d_MaterialAspect& theMaterial)
-{
-  if (!myDrawer->HasOwnShadingAspect())
-  {
-    myDrawer->SetShadingAspect (new Prs3d_ShadingAspect());
-    if (myDrawer->HasLink())
-    {
-      *myDrawer->ShadingAspect()->Aspect() = *myDrawer->Link()->ShadingAspect()->Aspect();
-    }
-  }
-
-  myDrawer->ShadingAspect()->SetMaterial (theMaterial);
-  hasOwnMaterial = Standard_True;
-}
-
-//=======================================================================
-//function : UnsetMaterial
-//purpose  :
-//=======================================================================
-void AIS_InteractiveObject::UnsetMaterial()
-{
-  if (!HasMaterial())
-  {
-    return;
-  }
-
-  if (HasColor() || IsTransparent())
-  {
-    if(myDrawer->HasLink())
-    {
-      myDrawer->ShadingAspect()->SetMaterial (AIS_GraphicTool::GetMaterial (myDrawer->Link()));
-    }
-
-    if (HasColor())
-    {
-      SetColor (myDrawer->Color());
-    }
-
-    if (IsTransparent())
-    {
-      SetTransparency (myDrawer->Transparency());
-    }
-  }
-  else
-  {
-    Handle(Prs3d_ShadingAspect) anAspect;
-    myDrawer->SetShadingAspect (anAspect);
-  }
-
-  hasOwnMaterial = Standard_False;
-}
-
-//=======================================================================
-//function : SetTransparency
-//purpose  :
-//=======================================================================
-void AIS_InteractiveObject::SetTransparency (const Standard_Real theValue)
-{
-  if (!myDrawer->HasOwnShadingAspect())
-  {
-    myDrawer->SetShadingAspect(new Prs3d_ShadingAspect());
-    if(myDrawer->HasLink())
-      myDrawer->ShadingAspect()->SetMaterial(AIS_GraphicTool::GetMaterial(myDrawer->Link()));
-  }
-
-  myDrawer->ShadingAspect()->Aspect()->ChangeFrontMaterial().SetTransparency (Standard_ShortReal(theValue));
-  myDrawer->ShadingAspect()->Aspect()->ChangeBackMaterial() .SetTransparency (Standard_ShortReal(theValue));
-  myDrawer->SetTransparency (Standard_ShortReal(theValue));
-}
-
-//=======================================================================
-//function : UnsetTransparency
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::UnsetTransparency()
-{
-  if(HasColor() || HasMaterial() )
-  {
-    myDrawer->ShadingAspect()->Aspect()->ChangeFrontMaterial().SetTransparency (0.0f);
-    myDrawer->ShadingAspect()->Aspect()->ChangeBackMaterial() .SetTransparency (0.0f);
-  }
-  else{
-    Handle (Prs3d_ShadingAspect) SA;
-    myDrawer->SetShadingAspect(SA);
-  }
-  myDrawer->SetTransparency (0.0f);
-}
-//=======================================================================
-//function : Transparency
-//purpose  : 
-//=======================================================================
-Standard_Real AIS_InteractiveObject::Transparency() const 
-{
-  return (myDrawer->Transparency() <= 0.005f ? 0.0 : myDrawer->Transparency());
-// Graphic3d_MaterialAspect Mat = myDrawer->ShadingAspect()->Aspect()->FrontMaterial();
-// return Mat.Transparency();
-}
-
-//=======================================================================
-//function : UnsetAttributes
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::UnsetAttributes()
-{
-  SelectMgr_SelectableObject::UnsetAttributes();
-
-  hasOwnColor    = Standard_False;
-  hasOwnMaterial = Standard_False;
-  myOwnWidth     = 0.0;
-  myDrawer->SetTransparency (0.0f);
-}
-
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::MustRecomputePrs(const Standard_Integer ) const 
-{}
-
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-const TColStd_ListOfInteger& AIS_InteractiveObject::ListOfRecomputeModes() const 
-{return myToRecomputeModes;}
-
-//=======================================================================
-//function : 
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::SetRecomputeOk()
-{myToRecomputeModes.Clear();}
-
-
-//=======================================================================
-//function : AcceptDisplayMode
-//purpose  : 
-//=======================================================================
-
-Standard_Boolean  AIS_InteractiveObject::AcceptDisplayMode(const Standard_Integer ) const
-{return Standard_True;}
-
-//=======================================================================
-//function : DefaultDisplayMode
-//purpose  : 
-//=======================================================================
-
-Standard_Integer AIS_InteractiveObject::DefaultDisplayMode() const
-{return 0;}
-
-
-//=======================================================================
-//function : SetInfiniteState
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::SetInfiniteState(const Standard_Boolean aFlag)
-{
-  myInfiniteState = aFlag;
-  Handle(Prs3d_Presentation) P;
-
-  for(Standard_Integer i =1; i<=myPresentations.Length();i++)
-  {
-    P = myPresentations(i).Presentation()->Presentation();
-    if(!P.IsNull())
-      P->SetInfiniteState(myInfiniteState);
-  }
-}
-
 //=======================================================================
 //function : HasPresentation
 //purpose  :
@@ -415,214 +105,41 @@ Handle(Prs3d_Presentation) AIS_InteractiveObject::Presentation() const
   }
 
   Handle(PrsMgr_Presentation) aPrs = myCTXPtr->MainPrsMgr()->Presentation (this, myDrawer->DisplayMode(), false);
-  return !aPrs.IsNull()
-       ? aPrs->Presentation()
-       : Handle(Prs3d_Presentation)();
+  return aPrs;
 }
 
 //=======================================================================
 //function : SetAspect 
 //purpose  : 
 //=======================================================================
-void AIS_InteractiveObject::SetAspect(const Handle(Prs3d_BasicAspect)& anAspect)
+void AIS_InteractiveObject::SetAspect(const Handle(Prs3d_BasicAspect)& theAspect)
 {
 
-  if( HasPresentation() ) {
-    Handle(Prs3d_Presentation) prs = Presentation();
-    { Handle(Prs3d_ShadingAspect) aspect =
-			Handle(Prs3d_ShadingAspect)::DownCast(anAspect);
-      if( !aspect.IsNull() ) {
-        Prs3d_Root::CurrentGroup(prs)->SetGroupPrimitivesAspect(aspect->Aspect());
-        return;
-      }
-    }
-    { Handle(Prs3d_LineAspect) aspect =
-			Handle(Prs3d_LineAspect)::DownCast(anAspect);
-      if( !aspect.IsNull() ) {
-        Prs3d_Root::CurrentGroup(prs)->SetGroupPrimitivesAspect(aspect->Aspect());
-        return;
-      }
-    }
-    { Handle(Prs3d_PointAspect) aspect =
-			Handle(Prs3d_PointAspect)::DownCast(anAspect);
-      if( !aspect.IsNull() ) {
-        Prs3d_Root::CurrentGroup(prs)->SetGroupPrimitivesAspect(aspect->Aspect());
-        return;
-      }
-    }
-    { Handle(Prs3d_TextAspect) aspect =
-			Handle(Prs3d_TextAspect)::DownCast(anAspect);
-      if( !aspect.IsNull() ) {
-        Prs3d_Root::CurrentGroup(prs)->SetGroupPrimitivesAspect(aspect->Aspect());
-        return;
-      }
-    }
-  }
-}
-
-//=======================================================================
-//function : SetPolygonOffsets 
-//purpose  : 
-//======================================================================= 
-void AIS_InteractiveObject::SetPolygonOffsets(const Standard_Integer    aMode,
-                                              const Standard_ShortReal  aFactor,
-                                              const Standard_ShortReal  aUnits) 
-{
-  if ( !HasPolygonOffsets() )
-    myDrawer->SetShadingAspect(new Prs3d_ShadingAspect());
-
-  myDrawer->ShadingAspect()->Aspect()->SetPolygonOffsets( aMode, aFactor, aUnits );
-  SynchronizeAspects();
-}
-
-//=======================================================================
-//function : HasPolygonOffsets 
-//purpose  : 
-//=======================================================================
-Standard_Boolean AIS_InteractiveObject::HasPolygonOffsets() const
-{
-  return !( myDrawer->ShadingAspect().IsNull() || 
-          ( myDrawer->HasLink() &&
-          myDrawer->ShadingAspect() == myDrawer->Link()->ShadingAspect() ) );
-}
-
-//=======================================================================
-//function : PolygonOffsets 
-//purpose  : 
-//=======================================================================
-void AIS_InteractiveObject::PolygonOffsets(Standard_Integer&    aMode,
-                                           Standard_ShortReal&  aFactor,
-                                           Standard_ShortReal&  aUnits) const 
-{
-  if( HasPolygonOffsets() )
-    myDrawer->ShadingAspect()->Aspect()->PolygonOffsets( aMode, aFactor, aUnits );
-}
-
-//=======================================================================
-//function : BoundingBox
-//purpose  : Returns bounding box of object correspondingly to its
-//           current display mode
-//=======================================================================
-void AIS_InteractiveObject::BoundingBox (Bnd_Box& theBndBox)
-{
-  if (myDrawer->DisplayMode() == -1)
-  {
-    if (!myPresentations.IsEmpty())
-    {
-      const Handle(PrsMgr_Presentation)& aPrs3d = myPresentations.First().Presentation();
-      const Handle(Graphic3d_Structure)& aStruct = aPrs3d->Presentation();
-      const Graphic3d_BndBox3d& aBndBox = aStruct->CStructure()->BoundingBox();
-
-      if (!aBndBox.IsValid())
-      {
-        theBndBox.SetVoid();
-        return;
-      }
-
-      theBndBox.Update (aBndBox.CornerMin().x(), aBndBox.CornerMin().y(), aBndBox.CornerMin().z(),
-                        aBndBox.CornerMax().x(), aBndBox.CornerMax().y(), aBndBox.CornerMax().z());
-      return;
-    }
-    else
-    {
-      for (PrsMgr_ListOfPresentableObjectsIter aPrsIter (Children()); aPrsIter.More(); aPrsIter.Next())
-      {
-        Handle(AIS_InteractiveObject) aChild (Handle(AIS_InteractiveObject)::DownCast (aPrsIter.Value()));
-        if (aChild.IsNull())
-        {
-          continue;
-        }
-        Bnd_Box aBox;
-        aChild->BoundingBox (aBox);
-        theBndBox.Add (aBox);
-      }
-      return;
-    }
-  }
-  else
-  {
-    for (Standard_Integer aPrsIter = 1; aPrsIter <= myPresentations.Length(); ++aPrsIter)
-    {
-      if (myPresentations (aPrsIter).Mode() == myDrawer->DisplayMode())
-      {
-        const Handle(PrsMgr_Presentation)& aPrs3d = myPresentations (aPrsIter).Presentation();
-        const Handle(Graphic3d_Structure)& aStruct = aPrs3d->Presentation();
-        const Graphic3d_BndBox3d& aBndBox = aStruct->CStructure()->BoundingBox();
-
-        if (!aBndBox.IsValid())
-        {
-          theBndBox.SetVoid();
-          return;
-        }
-
-        theBndBox.Update (aBndBox.CornerMin().x(), aBndBox.CornerMin().y(), aBndBox.CornerMin().z(),
-                          aBndBox.CornerMax().x(), aBndBox.CornerMax().y(), aBndBox.CornerMax().z());
-        return;
-      }
-    }
-  }
-}
-
-//=======================================================================
-//function : SetIsoOnTriangulation
-//purpose  : Enables or disables isoline on triangulation building
-//=======================================================================
-void AIS_InteractiveObject::SetIsoOnTriangulation (const Standard_Boolean theIsEnabled)
-{
-  myDrawer->SetIsoOnTriangulation (theIsEnabled);
-}
-
-//=======================================================================
-//function : SynchronizeAspects
-//purpose  :
-//=======================================================================
-void AIS_InteractiveObject::SynchronizeAspects()
-{
-  for (PrsMgr_Presentations::Iterator aPrsIter (myPresentations); aPrsIter.More(); aPrsIter.Next())
-  {
-    const Handle(PrsMgr_Presentation)& aPrs3d = aPrsIter.ChangeValue().Presentation();
-    if (aPrs3d.IsNull()
-     || aPrs3d->Presentation().IsNull())
-    {
-      continue;
-    }
-
-    for (Graphic3d_SequenceOfGroup::Iterator aGroupIter (aPrs3d->Presentation()->Groups()); aGroupIter.More(); aGroupIter.Next())
-    {
-      if (!aGroupIter.Value().IsNull())
-      {
-        aGroupIter.ChangeValue()->SynchronizeAspects();
-      }
-    }
-  }
-}
-
-//=======================================================================
-//function : replaceAspects
-//purpose  :
-//=======================================================================
-void AIS_InteractiveObject::replaceAspects (const Graphic3d_MapOfAspectsToAspects& theMap)
-{
-  if (theMap.IsEmpty())
+  if (!HasPresentation())
   {
     return;
   }
 
-  for (PrsMgr_Presentations::Iterator aPrsIter (myPresentations); aPrsIter.More(); aPrsIter.Next())
+  Handle(Prs3d_Presentation) aPrs = Presentation();
+  if (aPrs->Groups().IsEmpty())
   {
-    const Handle(PrsMgr_Presentation)& aPrs3d = aPrsIter.ChangeValue().Presentation();
-    if (aPrs3d.IsNull()
-     || aPrs3d->Presentation().IsNull())
-    {
-      continue;
-    }
-
-    for (Graphic3d_SequenceOfGroup::Iterator aGroupIter (aPrs3d->Presentation()->Groups()); aGroupIter.More(); aGroupIter.Next())
-    {
-      if (!aGroupIter.Value().IsNull())
-      {
-        aGroupIter.ChangeValue()->ReplaceAspects (theMap);
-      }
-    }
+    return;
+  }
+  const Handle(Graphic3d_Group)& aGroup = aPrs->Groups().Last();
+  if (Handle(Prs3d_ShadingAspect) aShadingAspect = Handle(Prs3d_ShadingAspect)::DownCast(theAspect))
+  {
+    aGroup->SetGroupPrimitivesAspect (aShadingAspect->Aspect());
+  }
+  else if (Handle(Prs3d_LineAspect) aLineAspect = Handle(Prs3d_LineAspect)::DownCast(theAspect))
+  {
+    aGroup->SetGroupPrimitivesAspect (aLineAspect->Aspect());
+  }
+  else if (Handle(Prs3d_PointAspect) aPointAspect = Handle(Prs3d_PointAspect)::DownCast(theAspect))
+  {
+    aGroup->SetGroupPrimitivesAspect (aPointAspect->Aspect());
+  }
+  else if (Handle(Prs3d_TextAspect) aTextAspect = Handle(Prs3d_TextAspect)::DownCast(theAspect))
+  {
+    aGroup->SetGroupPrimitivesAspect (aTextAspect->Aspect());
   }
 }

src/AIS/AIS_InteractiveObject.hxx

@@ -17,139 +17,48 @@
 #ifndef _AIS_InteractiveObject_HeaderFile
 #define _AIS_InteractiveObject_HeaderFile
 
-#include <Aspect_TypeOfFacingModel.hxx>
 #include <AIS_KindOfInteractive.hxx>
-#include <Graphic3d_NameOfMaterial.hxx>
-#include <PrsMgr_TypeOfPresentation3d.hxx>
 #include <SelectMgr_SelectableObject.hxx>
-#include <TColStd_ListOfInteger.hxx>
-#include <TColStd_ListOfTransient.hxx>
-#include <Quantity_Color.hxx>
 
 class AIS_InteractiveContext;
 class Graphic3d_MaterialAspect;
-class Prs3d_Presentation;
 class Prs3d_BasicAspect;
 class Bnd_Box;
 
 //! Defines a class of objects with display and selection services.
-//! Entities which are visualized and selected are
-//! Interactive Objects. You can make use of classes of
-//! standard Interactive Objects for which all necessary
-//! methods have already been programmed, or you can
-//! implement your own classes of Interactive Objects.
-//! Specific attributes of entities such as arrow aspect for
-//! dimensions must be loaded in a Drawer. This Drawer
-//! is then applied to the Interactive Object in view.
-//! There are four types of Interactive Object in AIS: the
-//! construction element or Datum, the Relation, which
-//! includes both dimensions and constraints, the Object,
-//! and finally, when the object is of an unknown type, the None type.
-//! Inside these categories, a signature, or index,
-//! provides the possibility of additional characterization.
-//! By default, the Interactive Object has a None type
-//! and a signature of 0. If you want to give a particular
-//! type and signature to your interactive object, you must
-//! redefine the methods, Signature and Type.
-//! Warning
-//! In the case of attribute methods, methods for
-//! standard attributes are virtual. They must be
-//! redefined   by the inheriting classes. Setcolor for a
-//! point and Setcolor for a plane, for example, do not
-//! affect the same attributes in the Drawer.
+//! Entities which are visualized and selected are Interactive Objects.
+//! Specific attributes of entities such as arrow aspect for dimensions must be loaded in a Prs3d_Drawer.
+//!
+//! You can make use of classes of standard Interactive Objects for which all necessary methods have already been programmed,
+//! or you can implement your own classes of Interactive Objects.
+//! Key interface methods to be implemented by every Interactive Object:
+//! * Presentable Object (PrsMgr_PresentableObject)
+//!   Consider defining an enumeration of supported Display Mode indexes for particular Interactive Object or class of Interactive Objects.
+//!   - AcceptDisplayMode() accepting display modes implemented by this object;
+//!   - Compute() computing presentation for the given display mode index;
+//! * Selectable Object (SelectMgr_SelectableObject)
+//!   Consider defining an enumeration of supported Selection Mode indexes for particular Interactive Object or class of Interactive Objects.
+//!   - ComputeSelection() computing selectable entities for the given selection mode index.
 class AIS_InteractiveObject : public SelectMgr_SelectableObject
 {
   friend class AIS_InteractiveContext;
   DEFINE_STANDARD_RTTIEXT(AIS_InteractiveObject, SelectMgr_SelectableObject)
 public:
 
-  //! Returns the kind of Interactive Object:
-  //! -   None
-  //! -   Datum
-  //! -   Relation
-  //! -   Object
-  //! By default, the   interactive object has a None type.
-  //! Because specific shapes entail different behavior
-  //! according to their sub-shapes, you may need to
-  //! create a Local Context. This will allow you to
-  //! specify the additional characteristics which you
-  //! need to handle these shapes.
-  Standard_EXPORT virtual AIS_KindOfInteractive Type() const;
-  
-  //! Specifies additional characteristics of Interactive
-  //! Objects. A signature is, in fact, an index with integer
-  //! values assigned different properties.
-  //! This method is frequently used in conjuction with
-  //! Type to give a particular type and signature to an
-  //! Interactive Object. By default, the Interactive Object
-  //! has a None type and a signature of 0. Among the
-  //! datums, this signature is attributed to the shape
+  //! Returns the kind of Interactive Object; AIS_KOI_None by default.
+  virtual AIS_KindOfInteractive Type() const { return AIS_KOI_None; }
+
+  //! Specifies additional characteristics of Interactive Object of Type(); -1 by default.
+  //! Among the datums, this signature is attributed to the shape.
   //! The remaining datums have the following default signatures:
-  //! -   Point                   signature 1
-  //! -   Axis                     signature 2
-  //! -   Trihedron                signature 3
-  //! -   PlaneTrihedron            signature 4
-  //! -   Line                     signature 5
-  //! -   Circle                  signature 6
-  //! -   Plane                   signature 7.
-  Standard_EXPORT virtual Standard_Integer Signature() const;
-  
-  //! Informs the graphic context that the interactive Object
-  //! may be decomposed into sub-shapes for dynamic selection.
-  //! The most used Interactive Object is AIS_Shape.
-  //! Activation methods for standard selection modes are
-  //! proposed in the Interactive Context. These include
-  //! selection by vertex or by edges. For datums with the
-  //! same behavior as AIS_Shape, such as vetices and
-  //! edges, we must redefine the virtual method so that
-  //! AcceptShapeDecomposition returns false.
-  //! Rule for selection :
-  //! Mode 0 :  Selection of  the interactive Object itself
-  //! Mode 1 :  Selection of vertices
-  //! Mode 2 :  Selection Of Edges
-  //! Mode 3 :  Selection Of Wires
-  //! Mode 4 :  Selection Of Faces ...
-  virtual Standard_Boolean AcceptShapeDecomposition() const { return Standard_False; }
-
-  //! change the current facing model apply on polygons for
-  //! SetColor(), SetTransparency(), SetMaterial() methods
-  //! default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is
-  //! applying both on the front and back face.
-  Standard_EXPORT void SetCurrentFacingModel (const Aspect_TypeOfFacingModel aModel = Aspect_TOFM_BOTH_SIDE);
-  
-  //! Returns the current facing model which is in effect.
-  Standard_EXPORT Aspect_TypeOfFacingModel CurrentFacingModel() const;
-
-  //! Only the interactive object knowns which Drawer attribute is affected by the color, if any
-  //! (ex: for a wire,it's the wireaspect field of the drawer, but for a vertex, only the point aspect field is affected by the color).
-  //! WARNING : Do not forget to set the corresponding fields here (hasOwnColor and myDrawer->SetColor())
-  Standard_EXPORT virtual void SetColor (const Quantity_Color& theColor);
-
-  //! Removes color settings. Only the Interactive Object
-  //! knows which Drawer attribute is   affected by the color
-  //! setting. For a wire, for example, wire aspect is the
-  //! attribute affected. For a vertex, however, only point
-  //! aspect is affected by the color setting.
-  Standard_EXPORT virtual void UnsetColor();
-  
-  //! Allows you to provide the setting aValue for width.
-  //! Only the Interactive Object knows which Drawer
-  //! attribute is affected by the width setting.
-  Standard_EXPORT virtual void SetWidth (const Standard_Real aValue);
-  
-  Standard_EXPORT virtual void UnsetWidth();
-  
-  //! Returns true if the class of objects accepts the display mode aMode.
-  //! The interactive context can have a default mode of
-  //! representation for the set of Interactive Objects. This
-  //! mode may not be accepted by a given class of
-  //! objects. Consequently, this virtual method allowing us
-  //! to get information about the class in question must be implemented.
-  Standard_EXPORT virtual Standard_Boolean AcceptDisplayMode (const Standard_Integer aMode) const;
-  
-  //! Returns the default display mode. This method is to
-  //! be implemented when the main mode is not mode 0.
-  Standard_EXPORT virtual Standard_Integer DefaultDisplayMode() const;
+  //! - Point          signature 1
+  //! - Axis           signature 2
+  //! - Trihedron      signature 3
+  //! - PlaneTrihedron signature 4
+  //! - Line           signature 5
+  //! - Circle         signature 6
+  //! - Plane          signature 7.
+  virtual Standard_Integer Signature() const { return -1; }
   
   //! Updates the active presentation; if <AllModes> = Standard_True
   //! all the presentations inside are recomputed.
@@ -158,33 +67,20 @@ public:
   //! is accessible. This method just redirects call to myCTXPtr,
   //! so this class field must be up to date for proper result.
   Standard_EXPORT void Redisplay (const Standard_Boolean AllModes = Standard_False);
-  
-  //! Sets the infinite state flag aFlage.
-  //! if   <aFlag>   = True  ,  the   interactiveObject  is
-  //! considered as infinite, i.e. its graphic presentations
-  //! are not taken in account for View FitAll...
-  Standard_EXPORT void SetInfiniteState (const Standard_Boolean aFlag = Standard_True);
-
-  //! Returns true if the interactive object is infinite. In this
-  //! case, its graphic presentations are not taken into
-  //! account in the fit-all view.
-  Standard_Boolean IsInfinite() const { return myInfiniteState; }
 
   //! Indicates whether the Interactive Object has a pointer to an interactive context.
   Standard_Boolean HasInteractiveContext() const { return myCTXPtr != NULL; }
 
   //! Returns the context pointer to the interactive context.
-  Standard_EXPORT Handle(AIS_InteractiveContext) GetContext() const;
+  AIS_InteractiveContext* InteractiveContext() const { return myCTXPtr; }
   
   //! Sets the interactive context aCtx and provides a link
   //! to the default drawing tool or "Drawer" if there is none.
   Standard_EXPORT virtual void SetContext (const Handle(AIS_InteractiveContext)& aCtx);
   
   //! Returns true if the object has an owner attributed to it.
-  //! The owner can be a shape for a set of sub-shapes or
-  //! a sub-shape for sub-shapes which it is composed of,
-  //! and takes the form of a transient.
-  Standard_EXPORT Standard_Boolean HasOwner() const;
+  //! The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient.
+  Standard_Boolean HasOwner() const { return !myOwner.IsNull(); }
   
   //! Returns the owner of the Interactive Object.
   //! The owner can be a shape for a set of sub-shapes or
@@ -203,207 +99,24 @@ public:
   //! is composed of. The owner takes the form of a transient.
   void SetOwner (const Handle(Standard_Transient)& theApplicativeEntity) { myOwner = theApplicativeEntity; }
 
-  //! Each Interactive Object has methods which allow us
-  //! to attribute an Owner to it in the form of a Transient.
+  //! Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient.
   //! This method removes the owner from the graphic entity.
-  Standard_EXPORT void ClearOwner();
+  void ClearOwner() { myOwner.Nullify(); }
 
-  //! Returns true if the Interactive Object has a display
-  //! mode setting. Otherwise, it is displayed in Neutral Point.
-  Standard_Boolean HasDisplayMode() const { return myDrawer->DisplayMode() != -1; }
+public:
 
-  //! Sets the display mode aMode for the interactive object.
-  //! An object can have its own temporary display mode,
-  //! which is different from that proposed by the interactive context.
-  //! The range of possibilities currently proposed is the following:
-  //! -   AIS_WireFrame
-  //! -   AIS_Shaded
-  //! This range can, however, be extended through the creation of new display modes.
-  Standard_EXPORT void SetDisplayMode (const Standard_Integer aMode);
+  //! Returns the context pointer to the interactive context.
+  Standard_EXPORT Handle(AIS_InteractiveContext) GetContext() const;
 
-  //! Removes display mode settings from the interactive object.
-  void UnsetDisplayMode() { myDrawer->SetDisplayMode (-1); }
-
-  //! Returns the display mode setting of the Interactive Object.
-  //! The range of possibilities is the following:
-  //! -   AIS_WireFrame
-  //! -   AIS_Shaded
-  //! This range can, however, be extended through the
-  //! creation of new display modes.
-  Standard_Integer DisplayMode() const { return myDrawer->DisplayMode(); }
-
-  //! Returns true if the Interactive Object is in highlight mode.
-  Standard_Boolean HasHilightMode() const { return !myHilightDrawer.IsNull() && myHilightDrawer->DisplayMode() != -1; }
-
-  //! Returns highlight display mode.
-  //! This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead.
-  Standard_Integer HilightMode() const { return !myHilightDrawer.IsNull() ? myHilightDrawer->DisplayMode() : -1; }
-
-  //! Sets highlight display mode.
-  //! This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead.
-  void SetHilightMode (const Standard_Integer theMode)
-  {
-    if (myHilightDrawer.IsNull())
-    {
-      myHilightDrawer = new Prs3d_Drawer();
-      myHilightDrawer->Link (myDrawer);
-      myHilightDrawer->SetAutoTriangulation (Standard_False);
-      myHilightDrawer->SetColor (Quantity_NOC_GRAY80);
-      myHilightDrawer->SetZLayer(Graphic3d_ZLayerId_UNKNOWN);
-    }
-    if (myDynHilightDrawer.IsNull())
-    {
-      myDynHilightDrawer = new Prs3d_Drawer();
-      myDynHilightDrawer->Link (myDrawer);
-      myDynHilightDrawer->SetColor (Quantity_NOC_CYAN1);
-      myDynHilightDrawer->SetAutoTriangulation (Standard_False);
-      myDynHilightDrawer->SetZLayer(Graphic3d_ZLayerId_Top);
-    }
-    myHilightDrawer   ->SetDisplayMode (theMode);
-    myDynHilightDrawer->SetDisplayMode (theMode);
-  }
-
-  //! Unsets highlight display mode.
-  void UnsetHilightMode()
-  {
-    if (!myHilightDrawer.IsNull())
-    {
-      myHilightDrawer->SetDisplayMode (-1);
-    }
-    if (!myDynHilightDrawer.IsNull())
-    {
-      myDynHilightDrawer->SetDisplayMode (-1);
-    }
-  }
-
-  //! Returns true if the Interactive Object has color.
-  Standard_Boolean HasColor() const { return hasOwnColor; }
-
-  //! Returns the color setting of the Interactive Object.
-  virtual void Color (Quantity_Color& theColor) const { theColor = myDrawer->Color(); }
-
-  //! Returns true if the Interactive Object has width.
-  Standard_Boolean HasWidth() const { return myOwnWidth != 0.0; }
-
-  //! Returns the width setting of the Interactive Object.
-  Standard_Real Width() const { return myOwnWidth; }
-
-  //! Returns true if the Interactive Object has a setting for material.
-  Standard_Boolean HasMaterial() const { return hasOwnMaterial; }
-
-  //! Returns the current material setting.
-  //! This will be on of the following materials:
-  //! -   Brass
-  //! -   Bronze
-  //! -   Gold
-  //! -   Pewter
-  //! -   Silver
-  //! -   Stone.
-  Standard_EXPORT virtual Graphic3d_NameOfMaterial Material() const;
-
-  //! Sets the material aMat defining this display attribute
-  //! for the interactive object.
-  //! Material aspect determines shading aspect, color and
-  //! transparency of visible entities.
-  Standard_EXPORT virtual void SetMaterial (const Graphic3d_MaterialAspect& aName);
-  
-  //! Removes the setting for material.
-  Standard_EXPORT virtual void UnsetMaterial();
-  
-  //! Attributes a setting aValue for transparency.
-  //! The transparency value should be between 0.0 and 1.0.
-  //! At 0.0 an object will be totally opaque, and at 1.0, fully transparent.
-  //! Warning At a value of 1.0, there may be nothing visible.
-  Standard_EXPORT virtual void SetTransparency (const Standard_Real aValue = 0.6);
-  
-  //! Returns true if there is a transparency setting.
-  Standard_Boolean IsTransparent() const { return myDrawer->Transparency() > 0.005f; }
-
-  //! Returns the transparency setting.
-  //! This will be between 0.0 and 1.0.
-  //! At 0.0 an object will be totally opaque, and at 1.0, fully transparent.
-  Standard_EXPORT virtual Standard_Real Transparency() const;
-  
-  //! Removes the transparency setting. The object is opaque by default.
-  Standard_EXPORT virtual void UnsetTransparency();
-  
-  //! Clears settings provided by the drawing tool aDrawer.
-  Standard_EXPORT virtual void UnsetAttributes() Standard_OVERRIDE;
-
-  //! Returns TRUE when this object has a presentation
-  //! in the current DisplayMode()
+  //! Returns TRUE when this object has a presentation in the current DisplayMode()
   Standard_EXPORT Standard_Boolean HasPresentation() const;
-  
-  //! Returns the current presentation of this object
-  //! according to the current DisplayMode()
+
+  //! Returns the current presentation of this object according to the current DisplayMode()
   Standard_EXPORT Handle(Prs3d_Presentation) Presentation() const;
 
   //! Sets the graphic basic aspect to the current presentation.
+  Standard_DEPRECATED("Deprecated method, results might be undefined")
   Standard_EXPORT void SetAspect (const Handle(Prs3d_BasicAspect)& anAspect);
-  
-  //! Sets up polygon offsets for this object.
-  //! It modifies all existing presentations of <anObj> (if any),
-  //! so it is reasonable to call this method after <anObj> has been displayed.
-  //! Otherwise, Compute() method should pass Graphic3d_AspectFillArea3d
-  //! aspect from <myDrawer> to Graphic3d_Group to make polygon offsets work.
-  //!
-  //! <aMode> parameter can contain various combinations of
-  //! Aspect_PolygonOffsetMode enumeration elements (Aspect_POM_None means
-  //! that polygon offsets are not changed).
-  //! If <aMode> is different from Aspect_POM_Off and Aspect_POM_None, then <aFactor> and <aUnits>
-  //! arguments are used by graphic renderer to calculate a depth offset value:
-  //!
-  //! offset = <aFactor> * m + <aUnits> * r, where
-  //! m - maximum depth slope for the polygon currently being displayed,
-  //! r - minimum window coordinates depth resolution (implementation-specific).
-  //!
-  //! Deafult settings for OCC 3D viewer: mode = Aspect_POM_Fill, factor = 1., units = 0.
-  //!
-  //! Negative offset values move polygons closer to the viewport,
-  //! while positive values shift polygons away.
-  //! Consult OpenGL reference for details (glPolygonOffset function description).
-  //!
-  //! NOTE: This method has a side effect - it creates own shading aspect
-  //! if not yet created, so it is better to set up object material,
-  //! color, etc. first.
-  Standard_EXPORT virtual void SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor = 1.0, const Standard_ShortReal aUnits = 0.0);
-  
-  //! Returns Standard_True if <myDrawer> has non-null shading aspect
-  Standard_EXPORT virtual Standard_Boolean HasPolygonOffsets() const;
-  
-  //! Retrieves current polygon offsets settings from <myDrawer>.
-  Standard_EXPORT virtual void PolygonOffsets (Standard_Integer& aMode, Standard_ShortReal& aFactor, Standard_ShortReal& aUnits) const;
-  
-  //! Returns bounding box of object correspondingly to its current display mode.
-  Standard_EXPORT virtual void BoundingBox (Bnd_Box& theBndBox) Standard_OVERRIDE;
-
-  //! Enables or disables on-triangulation build of isolines according to the flag given.
-  Standard_EXPORT void SetIsoOnTriangulation (const Standard_Boolean theIsEnabled);
-
-  //! Synchronize presentation aspects after their modification.
-  //!
-  //! This method should be called after modifying primitive aspect properties (material, texture, shader)
-  //! so that modifications will take effect on already computed presentation groups (thus avoiding re-displaying the object).
-  Standard_EXPORT void SynchronizeAspects();
-
-protected:
-
-  //! Replace aspects of existing (computed) presentation groups,
-  //! so that the new aspects can be applied without recomputing presentation.
-  //! It is NOT recommended approach, because user has to fill such map and then search for each occurrence in computed groups.
-  //! The recommended approach is computing presentation with necessary customized aspects,
-  //! and then modify them directly followed by SynchronizeAspects() call.
-  Standard_EXPORT void replaceAspects (const Graphic3d_MapOfAspectsToAspects& theMap);
-
-private:
-
-  Standard_EXPORT virtual Standard_Boolean RecomputeEveryPrs() const;
-
-  Standard_EXPORT void MustRecomputePrs (const Standard_Integer aMode) const;
-
-  Standard_EXPORT const TColStd_ListOfInteger& ListOfRecomputeModes() const;
-
-  Standard_EXPORT void SetRecomputeOk();
 
 protected:
 
@@ -411,20 +124,10 @@ protected:
   //! may have a presentation dependant of the view of Display.
   Standard_EXPORT AIS_InteractiveObject(const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d = PrsMgr_TOP_AllView);
 
-private:
-
-  AIS_InteractiveContext* myCTXPtr;
-  Handle(Standard_Transient) myOwner;
-
 protected:
 
-  TColStd_ListOfInteger myToRecomputeModes;
-  Standard_Real myOwnWidth;
-  Aspect_TypeOfFacingModel myCurrentFacingModel;
-  Standard_Boolean myInfiniteState;
-  Standard_Boolean hasOwnColor;
-  Standard_Boolean hasOwnMaterial;
-  Standard_Boolean myRecomputeEveryPrs;
+  AIS_InteractiveContext*    myCTXPtr; //!< pointer to Interactive Context, where object is currently displayed; @sa SetContext()
+  Handle(Standard_Transient) myOwner;  //!< application-specific owner object
 
 };
 

src/AIS/AIS_LengthDimension.hxx

@@ -18,37 +18,13 @@
 #include <AIS_Dimension.hxx>
 #include <AIS_KindOfDimension.hxx>
 #include <Geom_Plane.hxx>
-#include <Geom_Transformation.hxx>
 #include <gp_Pnt.hxx>
 #include <gp_Dir.hxx>
 #include <Prs3d_DimensionAspect.hxx>
 #include <Prs3d_Drawer.hxx>
-#include <Prs3d_Presentation.hxx>
 #include <Prs3d_Projector.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <SelectMgr_Selection.hxx>
-#include <Standard.hxx>
-#include <Standard_Macro.hxx>
-#include <Standard_Type.hxx>
 #include <TopoDS.hxx>
 #include <TopoDS_Vertex.hxx>
-#include <TCollection_ExtendedString.hxx>
-
-class TopoDS_Face;
-class TCollection_ExtendedString;
-class gp_Pnt;
-class TopoDS_Edge;
-class TopoDS_Shape;
-class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
-class SelectMgr_Selection;
-class Bnd_Box;
-class gp_Dir;
-class TopoDS_Vertex;
-class Standard_Transient;
-class AIS_LengthDimension;
 
 DEFINE_STANDARD_HANDLE (AIS_LengthDimension, AIS_Dimension)
 

src/AIS/AIS_Line.cxx

@@ -41,52 +41,6 @@
 
 IMPLEMENT_STANDARD_RTTIEXT(AIS_Line,AIS_InteractiveObject)
 
-//==================================================================
-// function: FindLimits
-// purpose:
-//==================================================================
-//unused
-/*#ifdef OCCT_DEBUG
-static void FindLimits(const Adaptor3d_Curve& aCurve,
-		       const Standard_Real  aLimit,
-		       gp_Pnt& P1,
-		       gp_Pnt& P2)
-{
-  Standard_Real First = aCurve.FirstParameter();
-  Standard_Real Last  = aCurve.LastParameter();
-  Standard_Boolean firstInf = Precision::IsNegativeInfinite(First);
-  Standard_Boolean lastInf  = Precision::IsPositiveInfinite(Last);
-  if (firstInf || lastInf) {
-    Standard_Real delta = 1;
-    if (firstInf && lastInf) {
-      do {
-	delta *= 2;
-	First = - delta;
-	Last  =   delta;
-	aCurve.D0(First,P1);
-	aCurve.D0(Last,P2);
-      } while (P1.Distance(P2) < aLimit);
-    }
-    else if (firstInf) {
-      aCurve.D0(Last,P2);
-      do {
-	delta *= 2;
-	First = Last - delta;
-	aCurve.D0(First,P1);
-      } while (P1.Distance(P2) < aLimit);
-    }
-    else if (lastInf) {
-      aCurve.D0(First,P1);
-      do {
-	delta *= 2;
-	Last = First + delta;
-	aCurve.D0(Last,P2);
-      } while (P1.Distance(P2) < aLimit);
-    }
-  }    
-}
-#endif
-*/
 //=======================================================================
 //function : AIS_Line
 //purpose  : 
@@ -126,8 +80,7 @@ void AIS_Line::Compute(const Handle(PrsMgr_PresentationManager3d)&,
 
 void AIS_Line::Compute(const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTransformation, const Handle(Prs3d_Presentation)& aPresentation)
 {
-// throw Standard_NotImplemented("AIS_Line::Compute(const Handle(Prs3d_Projector)&, const Handle(Geom_Transformation)&, const Handle(Prs3d_Presentation)&)");
- PrsMgr_PresentableObject::Compute( aProjector , aTransformation , aPresentation) ;
+  PrsMgr_PresentableObject::Compute( aProjector , aTransformation , aPresentation) ;
 }
 
 //=======================================================================
@@ -152,6 +105,29 @@ void AIS_Line::ComputeSelection(const Handle(SelectMgr_Selection)& theSelection,
   }
 }
 
+//=======================================================================
+//function : replaceWithNewLineAspect
+//purpose  :
+//=======================================================================
+void AIS_Line::replaceWithNewLineAspect (const Handle(Prs3d_LineAspect)& theAspect)
+{
+  if (!myDrawer->HasLink())
+  {
+    myDrawer->SetLineAspect (theAspect);
+    return;
+  }
+
+  const Handle(Graphic3d_Aspects)& anAspectOld = myDrawer->LineAspect()->Aspect();
+  const Handle(Graphic3d_Aspects)& anAspectNew = !theAspect.IsNull() ? theAspect->Aspect() : myDrawer->Link()->LineAspect()->Aspect();
+  if (anAspectNew != anAspectOld)
+  {
+    myDrawer->SetLineAspect (theAspect);
+    Graphic3d_MapOfAspectsToAspects aReplaceMap;
+    aReplaceMap.Bind (anAspectOld, anAspectNew);
+    replaceAspects (aReplaceMap);
+  }
+}
+
 //=======================================================================
 //function : SetColor
 //purpose  :
@@ -165,10 +141,15 @@ void AIS_Line::SetColor(const Quantity_Color &aCol)
                                  myDrawer->HasLink() ?
                                  AIS_GraphicTool::GetLineWidth (myDrawer->Link(), AIS_TOA_Line) : 1.;
 
-  if (!myDrawer->HasOwnLineAspect ())
-    myDrawer->SetLineAspect (new Prs3d_LineAspect(aCol,Aspect_TOL_SOLID,WW));
+  if (!myDrawer->HasOwnLineAspect())
+  {
+    replaceWithNewLineAspect (new Prs3d_LineAspect (aCol, Aspect_TOL_SOLID, WW));
+  }
   else
-    myDrawer->LineAspect()->SetColor(aCol);
+  {
+    myDrawer->LineAspect()->SetColor (aCol);
+    SynchronizeAspects();
+  }
 }
 
 
@@ -180,16 +161,19 @@ void AIS_Line::UnsetColor()
 {
   hasOwnColor = Standard_False;
 
-  Handle(Prs3d_LineAspect) NullAsp;
-
-  if (!HasWidth()) myDrawer->SetLineAspect(NullAsp);
-  else{
+  if (!HasWidth())
+  {
+    replaceWithNewLineAspect (Handle(Prs3d_LineAspect)());
+  }
+  else
+  {
     Quantity_Color CC = Quantity_NOC_YELLOW;
     if( HasColor() ) CC = myDrawer->Color();
     else if (myDrawer->HasLink()) AIS_GraphicTool::GetLineColor (myDrawer->Link(), AIS_TOA_Line, CC);
     myDrawer->LineAspect()->SetColor(CC);
     myDrawer->SetColor (CC);
- }
+    SynchronizeAspects();
+  }
 }
 
 //=======================================================================
@@ -198,15 +182,20 @@ void AIS_Line::UnsetColor()
 //=======================================================================
 void AIS_Line::SetWidth(const Standard_Real aValue)
 {
-  myOwnWidth=aValue;
+  myOwnWidth = (Standard_ShortReal )aValue;
 
-  if (!myDrawer->HasOwnLineAspect ()) {
+  if (!myDrawer->HasOwnLineAspect())
+  {
     Quantity_Color CC = Quantity_NOC_YELLOW;
     if( HasColor() ) CC = myDrawer->Color();
     else if(myDrawer->HasLink()) AIS_GraphicTool::GetLineColor (myDrawer->Link(), AIS_TOA_Line, CC);
-    myDrawer->SetLineAspect (new Prs3d_LineAspect (CC, Aspect_TOL_SOLID, aValue));
-  } else
-    myDrawer->LineAspect()->SetWidth(aValue);
+    replaceWithNewLineAspect (new Prs3d_LineAspect (CC, Aspect_TOL_SOLID, aValue));
+  }
+  else
+  {
+    myDrawer->LineAspect()->SetWidth (aValue);
+    SynchronizeAspects();
+  }
 }
 
 
@@ -216,14 +205,16 @@ void AIS_Line::SetWidth(const Standard_Real aValue)
 //=======================================================================
 void AIS_Line::UnsetWidth()
 {
-  Handle(Prs3d_LineAspect) NullAsp;
-
-  if (!HasColor()) myDrawer->SetLineAspect(NullAsp);
-  else{
-   Standard_Real WW = myDrawer->HasLink() ?
-     AIS_GraphicTool::GetLineWidth (myDrawer->Link(), AIS_TOA_Line) : 1.;
-   myDrawer->LineAspect()->SetWidth(WW);
+  if (!HasColor())
+  {
+    replaceWithNewLineAspect (Handle(Prs3d_LineAspect)());
+  }
+  else
+  {
+   Standard_ShortReal WW = myDrawer->HasLink() ? (Standard_ShortReal )AIS_GraphicTool::GetLineWidth (myDrawer->Link(), AIS_TOA_Line) : 1.0f;
+   myDrawer->LineAspect()->SetWidth (WW);
    myOwnWidth = WW;
+   SynchronizeAspects();
   }
 }
 

src/AIS/AIS_Line.hxx

@@ -107,6 +107,9 @@ private:
   
   Standard_EXPORT void ComputeSegmentLineSelection (const Handle(SelectMgr_Selection)& aSelection);
 
+  //! Replace aspects of already computed groups with the new value.
+  void replaceWithNewLineAspect (const Handle(Prs3d_LineAspect)& theAspect);
+
 private:
 
   Handle(Geom_Line) myComponent;

src/AIS/AIS_Manipulator.cxx

@@ -85,7 +85,7 @@ namespace
   {
   public:
     //! Main constructor.
-    ManipSensCircle (const Handle(SelectBasics_EntityOwner)& theOwnerId,
+    ManipSensCircle (const Handle(SelectMgr_EntityOwner)& theOwnerId,
                      const Handle(Geom_Circle)& theCircle,
                      const Standard_Integer theNbPnts)
     : Select3D_SensitiveCircle (theOwnerId, theCircle, Standard_False, theNbPnts),
@@ -104,7 +104,7 @@ namespace
   class ManipSensTriangulation : public Select3D_SensitiveTriangulation, public ManipSensRotation
   {
   public:
-    ManipSensTriangulation (const Handle(SelectBasics_EntityOwner)& theOwnerId,
+    ManipSensTriangulation (const Handle(SelectMgr_EntityOwner)& theOwnerId,
                             const Handle(Poly_Triangulation)& theTrg,
                             const gp_Dir& thePlaneNormal)
     : Select3D_SensitiveTriangulation (theOwnerId, theTrg, TopLoc_Location(), Standard_True),
@@ -297,7 +297,7 @@ void AIS_Manipulator::SetPart (const Standard_Integer theAxisIndex, const AIS_Ma
 //=======================================================================
 void AIS_Manipulator::SetPart (const AIS_ManipulatorMode theMode, const Standard_Boolean theIsEnabled)
 {
-  for (Standard_Integer anIt = 0; anIt < 4; ++anIt)
+  for (Standard_Integer anIt = 0; anIt < 3; ++anIt)
   {
     SetPart (anIt, theMode, theIsEnabled);
   }
@@ -702,7 +702,20 @@ void AIS_Manipulator::Transform (const gp_Trsf& theTrsf)
     NCollection_Sequence<gp_Trsf>::Iterator aTrsfIter (myStartTrsfs);
     for (; anObjIter.More(); anObjIter.Next(), aTrsfIter.Next())
     {
-      anObjIter.ChangeValue()->SetLocalTransformation (theTrsf * aTrsfIter.Value());
+      const Handle(AIS_InteractiveObject)& anObj = anObjIter.ChangeValue();
+      const gp_Trsf& anOldTrsf = aTrsfIter.Value();
+      const Handle(Geom_Transformation)& aParentTrsf = anObj->CombinedParentTransformation();
+      if (!aParentTrsf.IsNull()
+        && aParentTrsf->Form() != gp_Identity)
+      {
+        // recompute local transformation relative to parent transformation
+        const gp_Trsf aNewLocalTrsf = aParentTrsf->Trsf().Inverted() * theTrsf * aParentTrsf->Trsf() * anOldTrsf;
+        anObj->SetLocalTransformation (aNewLocalTrsf);
+      }
+      else
+      {
+        anObj->SetLocalTransformation (theTrsf * anOldTrsf);
+      }
     }
   }
 
@@ -1022,15 +1035,21 @@ void AIS_Manipulator::HilightOwnerWithColor (const Handle(PrsMgr_PresentationMan
   {
     return;
   }
+
+  aPresentation->CStructure()->ViewAffinity = thePM->StructureManager()->ObjectAffinity (Handle(Standard_Transient) (this));
+
   if (anOwner->Mode() == AIS_MM_TranslationPlane)
   {
     Handle(Prs3d_Drawer) aStyle = new Prs3d_Drawer();
-    aStyle->SetColor(myAxes[anOwner->Index()].Color());
-    aStyle->SetTransparency(0.5);
-    aPresentation->Highlight(aStyle);
+    aStyle->SetColor (myAxes[anOwner->Index()].Color());
+    aStyle->SetTransparency (0.5);
+    aPresentation->Highlight (aStyle);
   }
   else
-    aPresentation->Highlight(theStyle);
+  {
+    aPresentation->Highlight (theStyle);
+  }
+
   for (Graphic3d_SequenceOfGroup::Iterator aGroupIter (aPresentation->Groups());
        aGroupIter.More(); aGroupIter.Next())
   {

src/AIS/AIS_MaxRadiusDimension.hxx

@@ -17,38 +17,19 @@
 #ifndef _AIS_MaxRadiusDimension_HeaderFile
 #define _AIS_MaxRadiusDimension_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
 #include <AIS_EllipseRadiusDimension.hxx>
-#include <Standard_Real.hxx>
 #include <DsgPrs_ArrowSide.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class Standard_ConstructionError;
-class TopoDS_Shape;
-class TCollection_ExtendedString;
-class gp_Pnt;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_MaxRadiusDimension;
 DEFINE_STANDARD_HANDLE(AIS_MaxRadiusDimension, AIS_EllipseRadiusDimension)
 
-
 //! Ellipse  Max  radius  dimension  of  a  Shape  which  can  be  Edge
 //! or  Face  (planar  or  cylindrical(surface  of  extrusion  or
 //! surface  of  offset))
 class AIS_MaxRadiusDimension : public AIS_EllipseRadiusDimension
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_MaxRadiusDimension, AIS_EllipseRadiusDimension)
 public:
 
-  
   //! Max  Ellipse  radius dimension
   //! Shape  can  be  edge  ,  planar  face  or  cylindrical  face
   Standard_EXPORT AIS_MaxRadiusDimension(const TopoDS_Shape& aShape, const Standard_Real aVal, const TCollection_ExtendedString& aText);
@@ -66,19 +47,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_MaxRadiusDimension,AIS_EllipseRadiusDimension)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT virtual void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -93,13 +63,6 @@ private:
   gp_Pnt myApexN;
   gp_Pnt myEndOfArrow;
 
-
 };
 
-
-
-
-
-
-
 #endif // _AIS_MaxRadiusDimension_HeaderFile

src/AIS/AIS_MediaPlayer.cxx

@@ -0,0 +1,250 @@
+// Created by: Kirill GAVRILOV
+// Copyright (c) 2019 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#include <AIS_MediaPlayer.hxx>
+
+#include <AIS_InteractiveContext.hxx>
+#include <Media_PlayerContext.hxx>
+#include <Message.hxx>
+#include <Message_Messenger.hxx>
+#include <Graphic3d_ArrayOfTriangles.hxx>
+#include <Graphic3d_MediaTexture.hxx>
+#include <SelectMgr_EntityOwner.hxx>
+#include <Select3D_SensitivePrimitiveArray.hxx>
+#include <V3d_Viewer.hxx>
+
+IMPLEMENT_STANDARD_RTTIEXT(AIS_MediaPlayer, AIS_InteractiveObject)
+
+//! Create an array of triangles defining a rectangle.
+static Handle(Graphic3d_ArrayOfTriangles) createRectangleArray (const Graphic3d_Vec2i& theLower,
+                                                                const Graphic3d_Vec2i& theUpper,
+                                                                Graphic3d_ArrayFlags theFlags)
+{
+  Handle(Graphic3d_ArrayOfTriangles) aRectTris = new Graphic3d_ArrayOfTriangles (4, 6, theFlags);
+  aRectTris->AddVertex (gp_Pnt (theLower.x(), theLower.y(), 0.0), gp_Pnt2d (0.0, 1.0));
+  aRectTris->AddVertex (gp_Pnt (theLower.x(), theUpper.y(), 0.0), gp_Pnt2d (0.0, 0.0));
+  aRectTris->AddVertex (gp_Pnt (theUpper.x(), theUpper.y(), 0.0), gp_Pnt2d (1.0, 0.0));
+  aRectTris->AddVertex (gp_Pnt (theUpper.x(), theLower.y(), 0.0), gp_Pnt2d (1.0, 1.0));
+  aRectTris->AddEdges (1, 2, 3);
+  aRectTris->AddEdges (1, 3, 4);
+  return aRectTris;
+}
+
+//================================================================
+// Function : AIS_MediaPlayer
+// Purpose  :
+//================================================================
+AIS_MediaPlayer::AIS_MediaPlayer()
+: myFramePair (new Graphic3d_MediaTextureSet()),
+  myFrameSize (1, 1),
+  myToClosePlayer (false)
+{
+  SetTransformPersistence (new Graphic3d_TransformPers (Graphic3d_TMF_2d, Aspect_TOTP_LEFT_LOWER));
+  SetZLayer (Graphic3d_ZLayerId_TopOSD);
+  SetInfiniteState (true);
+
+  Graphic3d_MaterialAspect aMat;
+  myFrameAspect = new Graphic3d_AspectFillArea3d (Aspect_IS_SOLID, Quantity_NOC_WHITE, Quantity_NOC_BLACK, Aspect_TOL_SOLID, 1.0f, aMat, aMat);
+  myFrameAspect->SetShadingModel (Graphic3d_TOSM_UNLIT);
+  myFrameAspect->SetTextureMapOn (true);
+  myFrameAspect->SetTextureSet (myFramePair);
+}
+
+//================================================================
+// Function : ~AIS_MediaPlayer
+// Purpose  :
+//================================================================
+AIS_MediaPlayer::~AIS_MediaPlayer()
+{
+  // stop threads
+  myFramePair.Nullify();
+}
+
+// =======================================================================
+// function : OpenInput
+// purpose  :
+// =======================================================================
+void AIS_MediaPlayer::OpenInput (const TCollection_AsciiString& thePath,
+                                 Standard_Boolean theToWait)
+{
+  if (myFramePair->PlayerContext().IsNull()
+   && thePath.IsEmpty())
+  {
+    return;
+  }
+
+  myFramePair->OpenInput (thePath, theToWait);
+  SynchronizeAspects();
+}
+
+// =======================================================================
+// function : PresentFrame
+// purpose  :
+// =======================================================================
+bool AIS_MediaPlayer::PresentFrame (const Graphic3d_Vec2i& theLeftCorner,
+                                    const Graphic3d_Vec2i& theMaxSize)
+{
+  if (myToClosePlayer)
+  {
+    myToClosePlayer = false;
+    if (!HasInteractiveContext())
+    {
+      return false;
+    }
+
+    if (!myFramePair->PlayerContext().IsNull())
+    {
+      myFramePair->PlayerContext()->Pause();
+    }
+
+    Handle(AIS_InteractiveContext) aCtx = GetContext();
+    Handle(AIS_InteractiveObject) aThis = this;
+    aCtx->Remove (aThis, false);
+    aCtx->CurrentViewer()->Invalidate();
+    return true;
+  }
+
+  if (myFramePair->PlayerContext().IsNull())
+  {
+    return false;
+  }
+
+  bool toRedraw = myFramePair->SwapFrames();
+  toRedraw = updateSize (theLeftCorner, theMaxSize) || toRedraw;
+  if (toRedraw)
+  {
+    myFrameAspect->SetShaderProgram (myFramePair->ShaderProgram());
+    SynchronizeAspects();
+  }
+  return toRedraw;
+}
+
+// =======================================================================
+// function : updateSize
+// purpose  :
+// =======================================================================
+bool AIS_MediaPlayer::updateSize (const Graphic3d_Vec2i& theLeftCorner,
+                                  const Graphic3d_Vec2i& theMaxSize)
+{
+  const Graphic3d_Vec2i aFrameSize = myFramePair->FrameSize();
+  Graphic3d_Vec2i aNewPos  = theLeftCorner;
+  Graphic3d_Vec2i aNewSize = myFrameSize;
+  if (aFrameSize.x() > 0
+   && aFrameSize.y() > 0)
+  {
+    const double anAspect   = double(theMaxSize.x()) / double(theMaxSize.y());
+    const double aFitAspect = double(aFrameSize.x()) / double(aFrameSize.y());
+    aNewSize = aFrameSize;
+    if (aFitAspect >= anAspect)
+    {
+      aNewSize.y() = int(double(aFrameSize.x()) / aFitAspect);
+    }
+    else
+    {
+      aNewSize.x() = int(double(aFrameSize.y()) * aFitAspect);
+    }
+
+    for (int aCoord = 0; aCoord < 2; ++aCoord)
+    {
+      if (aNewSize[aCoord] > theMaxSize[aCoord])
+      {
+        const double aScale = double(theMaxSize[aCoord]) / double(aNewSize[aCoord]);
+        aNewSize.x() = int(double(aNewSize.x()) * aScale);
+        aNewSize.y() = int(double(aNewSize.y()) * aScale);
+      }
+    }
+
+    aNewPos = theLeftCorner + theMaxSize / 2 - aNewSize / 2;
+  }
+  else if (myFrameSize.x() < 2
+        || myFrameSize.y() < 2)
+  {
+    aNewSize = theMaxSize;
+  }
+
+  if (myFrameSize == aNewSize
+   && myFrameBottomLeft == aNewPos)
+  {
+    return false;
+  }
+
+  myFrameSize = aNewSize;
+  myFrameBottomLeft = aNewPos;
+  if (HasInteractiveContext())
+  {
+    SetToUpdate();
+    GetContext()->Redisplay (this, false);
+    GetContext()->CurrentViewer()->Invalidate();
+  }
+  return true;
+}
+
+// =======================================================================
+// function : PlayPause
+// purpose  :
+// =======================================================================
+void AIS_MediaPlayer::PlayPause()
+{
+  if (myFramePair->PlayerContext().IsNull())
+  {
+    return;
+  }
+
+  Standard_Real aProgress = 0.0, aDuration = 0.0;
+  bool isPaused = false;
+  myFramePair->PlayerContext()->PlayPause (isPaused, aProgress, aDuration);
+}
+
+// =======================================================================
+// function : Compute
+// purpose  :
+// =======================================================================
+void AIS_MediaPlayer::Compute (const Handle(PrsMgr_PresentationManager3d)& ,
+                               const Handle(Prs3d_Presentation)& thePrs,
+                               const Standard_Integer theMode)
+{
+  thePrs->SetInfiniteState (IsInfinite());
+  if (theMode != 0)
+  {
+    return;
+  }
+
+  // main frame
+  {
+    Handle(Graphic3d_ArrayOfTriangles) aTris = createRectangleArray (myFrameBottomLeft, myFrameBottomLeft + myFrameSize, Graphic3d_ArrayFlags_VertexTexel);
+    Handle(Graphic3d_Group) aMainGroup = thePrs->NewGroup();
+    aMainGroup->SetGroupPrimitivesAspect (myFrameAspect);
+    aMainGroup->AddPrimitiveArray (aTris);
+  }
+}
+
+// =======================================================================
+// function : ComputeSelection
+// purpose  :
+// =======================================================================
+void AIS_MediaPlayer::ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                        const Standard_Integer theMode)
+{
+  if (theMode != 0)
+  {
+    return;
+  }
+
+  Handle(Graphic3d_ArrayOfTriangles) aTris = createRectangleArray (myFrameBottomLeft, myFrameBottomLeft + myFrameSize, Graphic3d_ArrayFlags_None);
+
+  Handle(SelectMgr_EntityOwner) anOwner = new SelectMgr_EntityOwner (this, 5);
+  Handle(Select3D_SensitivePrimitiveArray) aSens = new Select3D_SensitivePrimitiveArray (anOwner);
+  aSens->InitTriangulation (aTris->Attributes(), aTris->Indices(), TopLoc_Location());
+  theSel->Add (aSens);
+}

src/AIS/AIS_MediaPlayer.hxx

@@ -0,0 +1,96 @@
+// Created by: Kirill GAVRILOV
+// Copyright (c) 2019 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#ifndef _AIS_MediaPlayer_HeaderFile
+#define _AIS_MediaPlayer_HeaderFile
+
+#include <AIS_InteractiveObject.hxx>
+#include <Graphic3d_MediaTextureSet.hxx>
+
+class Media_PlayerContext;
+
+//! Presentation for video playback.
+class AIS_MediaPlayer : public AIS_InteractiveObject
+{
+  DEFINE_STANDARD_RTTIEXT(AIS_MediaPlayer, AIS_InteractiveObject)
+public:
+
+  //! Empty constructor.
+  Standard_EXPORT AIS_MediaPlayer();
+
+  //! Destructor.
+  Standard_EXPORT virtual ~AIS_MediaPlayer();
+
+  //! Setup callback to be called on queue progress (e.g. when new frame should be displayed).
+  void SetCallback (Graphic3d_MediaTextureSet::CallbackOnUpdate_t theCallbackFunction, void* theCallbackUserPtr)
+  {
+    myFramePair->SetCallback (theCallbackFunction, theCallbackUserPtr);
+  }
+
+  //! Open specified file.
+  Standard_EXPORT void OpenInput (const TCollection_AsciiString& thePath,
+                                  Standard_Boolean theToWait);
+
+  //! Display new frame.
+  Standard_EXPORT bool PresentFrame (const Graphic3d_Vec2i& theLeftCorner,
+                                     const Graphic3d_Vec2i& theMaxSize);
+
+  //! Return player context.
+  const Handle(Media_PlayerContext)& PlayerContext() const { return myFramePair->PlayerContext(); }
+
+  //! Switch playback state.
+  Standard_EXPORT void PlayPause();
+
+  //! Schedule player to be closed.
+  void SetClosePlayer()
+  {
+    myToClosePlayer = true;
+    myFramePair->Notify();
+  }
+
+  //! Return duration.
+  double Duration() const { return myFramePair->Duration(); }
+
+//! @name AIS_InteractiveObject interface
+protected:
+
+  //! Accept only display mode 0.
+  virtual Standard_Boolean AcceptDisplayMode (const Standard_Integer theMode) const Standard_OVERRIDE { return theMode == 0; }
+
+  //! Compute presentation.
+  Standard_EXPORT virtual void Compute (const Handle(PrsMgr_PresentationManager3d)& thePrsMgr,
+                                        const Handle(Prs3d_Presentation)& thePrs,
+                                        const Standard_Integer theMode) Standard_OVERRIDE;
+
+  //! Compute selection
+  Standard_EXPORT virtual void ComputeSelection (const Handle(SelectMgr_Selection)& theSel,
+                                                 const Standard_Integer theMode) Standard_OVERRIDE;
+
+protected:
+
+  //! Update frame size.
+  Standard_EXPORT bool updateSize (const Graphic3d_Vec2i& theLeftCorner,
+                                   const Graphic3d_Vec2i& theMaxSize);
+
+protected:
+
+  Handle(Graphic3d_MediaTextureSet)  myFramePair;
+  Handle(Graphic3d_AspectFillArea3d) myFrameAspect;
+  Graphic3d_Vec2i     myFrameBottomLeft;
+  Graphic3d_Vec2i     myFrameSize;
+  bool                myToClosePlayer;
+
+};
+
+#endif // _AIS_MediaPlayer_HeaderFile

src/AIS/AIS_MidPointRelation.hxx

@@ -16,37 +16,22 @@
 #ifndef _AIS_MidPointRelation_HeaderFile
 #define _AIS_MidPointRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <TopoDS_Shape.hxx>
-#include <gp_Pnt.hxx>
 #include <AIS_Relation.hxx>
-#include <Standard_Boolean.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
+
 class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 class gp_Lin;
 class gp_Pnt;
 class gp_Circ;
 class gp_Elips;
 
-
-class AIS_MidPointRelation;
 DEFINE_STANDARD_HANDLE(AIS_MidPointRelation, AIS_Relation)
 
 //! presentation of equal distance to point myMidPoint
 class AIS_MidPointRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_MidPointRelation, AIS_Relation)
 public:
 
-  
   Standard_EXPORT AIS_MidPointRelation(const TopoDS_Shape& aSymmTool, const TopoDS_Shape& FirstShape, const TopoDS_Shape& SecondShape, const Handle(Geom_Plane)& aPlane);
   
     virtual Standard_Boolean IsMovable() const Standard_OVERRIDE;
@@ -64,19 +49,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_MidPointRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -118,14 +92,8 @@ private:
   gp_Pnt mySecondPnt1;
   gp_Pnt mySecondPnt2;
 
-
 };
 
-
 #include <AIS_MidPointRelation.lxx>
 
-
-
-
-
 #endif // _AIS_MidPointRelation_HeaderFile

src/AIS/AIS_MinRadiusDimension.hxx

@@ -17,26 +17,9 @@
 #ifndef _AIS_MinRadiusDimension_HeaderFile
 #define _AIS_MinRadiusDimension_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
 #include <AIS_EllipseRadiusDimension.hxx>
-#include <Standard_Real.hxx>
 #include <DsgPrs_ArrowSide.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class Standard_ConstructionError;
-class TopoDS_Shape;
-class TCollection_ExtendedString;
-class gp_Pnt;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_MinRadiusDimension;
 DEFINE_STANDARD_HANDLE(AIS_MinRadiusDimension, AIS_EllipseRadiusDimension)
 
 //! --  Ellipse  Min  radius  dimension  of  a  Shape  which
@@ -44,10 +27,9 @@ DEFINE_STANDARD_HANDLE(AIS_MinRadiusDimension, AIS_EllipseRadiusDimension)
 //! extrusion  or  surface  of  offset))
 class AIS_MinRadiusDimension : public AIS_EllipseRadiusDimension
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_MinRadiusDimension, AIS_EllipseRadiusDimension)
 public:
 
-  
   //! Max  Ellipse  radius dimension
   //! Shape  can  be  edge  ,  planar  face  or  cylindrical  face
   Standard_EXPORT AIS_MinRadiusDimension(const TopoDS_Shape& aShape, const Standard_Real aVal, const TCollection_ExtendedString& aText);
@@ -65,18 +47,7 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_MinRadiusDimension,AIS_EllipseRadiusDimension)
-
-protected:
-
-
-
-
 private:
-
   
   Standard_EXPORT virtual void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
@@ -92,13 +63,6 @@ private:
   gp_Pnt myApexN;
   gp_Pnt myEndOfArrow;
 
-
 };
 
-
-
-
-
-
-
 #endif // _AIS_MinRadiusDimension_HeaderFile

src/AIS/AIS_MouseGesture.hxx

@@ -0,0 +1,36 @@
+// Copyright (c) 2019 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#ifndef _AIS_MouseGesture_HeaderFile
+#define _AIS_MouseGesture_HeaderFile
+
+#include <NCollection_DataMap.hxx>
+
+//! Mouse gesture - only one can be active at one moment.
+enum AIS_MouseGesture
+{
+  AIS_MouseGesture_NONE,            //!< no active gesture
+  //
+  AIS_MouseGesture_SelectRectangle, //!< rectangular selection
+  AIS_MouseGesture_SelectLasso,     //!< polygonal   selection
+  //
+  AIS_MouseGesture_Zoom,            //!< view zoom gesture
+  AIS_MouseGesture_Pan,             //!< view panning gesture
+  AIS_MouseGesture_RotateOrbit,     //!< orbit rotation gesture
+  AIS_MouseGesture_RotateView,      //!< view  rotation gesture
+};
+
+//! Map defining mouse gestures.
+typedef NCollection_DataMap<unsigned int, AIS_MouseGesture> AIS_MouseGestureMap;
+
+#endif // _AIS_MouseGesture_HeaderFile

src/AIS/AIS_MultipleConnectedInteractive.cxx

@@ -20,7 +20,6 @@
 #include <AIS_InteractiveContext.hxx>
 #include <AIS_InteractiveObject.hxx>
 #include <Prs3d_Projector.hxx>
-#include <PrsMgr_ModedPresentation.hxx>
 #include <Select3D_SensitiveEntity.hxx>
 #include <SelectMgr_EntityOwner.hxx>
 #include <Standard_NotImplemented.hxx>

src/AIS/AIS_NavigationMode.hxx

@@ -0,0 +1,31 @@
+// Copyright (c) 2019 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#ifndef _AIS_NavigationMode_HeaderFile
+#define _AIS_NavigationMode_HeaderFile
+
+//! Camera navigation mode.
+enum AIS_NavigationMode
+{
+  AIS_NavigationMode_Orbit,             //!< orbit rotation
+  AIS_NavigationMode_FirstPersonFlight, //!< flight rotation (first person)
+  AIS_NavigationMode_FirstPersonWalk,   //!< walking mode (first person)
+};
+
+enum
+{
+  AIS_NavigationMode_LOWER = 0,
+  AIS_NavigationMode_UPPER = AIS_NavigationMode_FirstPersonWalk
+};
+
+#endif // _V3d_NavigationMode_HeaderFile

src/AIS/AIS_OffsetDimension.hxx

@@ -17,28 +17,9 @@
 #ifndef _AIS_OffsetDimension_HeaderFile
 #define _AIS_OffsetDimension_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
-#include <gp_Dir.hxx>
-#include <gp_Trsf.hxx>
 #include <AIS_Relation.hxx>
-#include <Standard_Real.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
 #include <AIS_KindOfDimension.hxx>
-#include <Standard_Boolean.hxx>
-class TopoDS_Shape;
-class TCollection_ExtendedString;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
-class gp_Trsf;
 
-
-class AIS_OffsetDimension;
 DEFINE_STANDARD_HANDLE(AIS_OffsetDimension, AIS_Relation)
 
 //! A framework to display dimensions of offsets.
@@ -48,10 +29,9 @@ DEFINE_STANDARD_HANDLE(AIS_OffsetDimension, AIS_Relation)
 //! and the basis shape.
 class AIS_OffsetDimension : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_OffsetDimension, AIS_Relation)
 public:
 
-  
   //! Constructs the offset display object defined by the
   //! first shape aFShape, the second shape aSShape, the
   //! dimension aVal, and the text aText.
@@ -77,19 +57,8 @@ public:
   //! selection to a relative position.
     void SetRelativePos (const gp_Trsf& aTrsf);
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_OffsetDimension,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT virtual void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -108,14 +77,8 @@ private:
   gp_Dir myDirAttach2;
   gp_Trsf myRelativePos;
 
-
 };
 
-
 #include <AIS_OffsetDimension.lxx>
 
-
-
-
-
 #endif // _AIS_OffsetDimension_HeaderFile

src/AIS/AIS_ParallelRelation.hxx

@@ -17,27 +17,9 @@
 #ifndef _AIS_ParallelRelation_HeaderFile
 #define _AIS_ParallelRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
-#include <gp_Dir.hxx>
 #include <AIS_Relation.hxx>
 #include <DsgPrs_ArrowSide.hxx>
-#include <Standard_Real.hxx>
-#include <Standard_Boolean.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
-class Geom_Plane;
-class gp_Pnt;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_ParallelRelation;
 DEFINE_STANDARD_HANDLE(AIS_ParallelRelation, AIS_Relation)
 
 //! A framework to display constraints of parallelism
@@ -45,7 +27,7 @@ DEFINE_STANDARD_HANDLE(AIS_ParallelRelation, AIS_Relation)
 //! entities can be faces or edges.
 class AIS_ParallelRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_ParallelRelation, AIS_Relation)
 public:
 
   
@@ -73,19 +55,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_ParallelRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -100,14 +71,8 @@ private:
   gp_Pnt mySAttach;
   gp_Dir myDirAttach;
 
-
 };
 
-
 #include <AIS_ParallelRelation.lxx>
 
-
-
-
-
 #endif // _AIS_ParallelRelation_HeaderFile

src/AIS/AIS_PerpendicularRelation.hxx

@@ -17,22 +17,8 @@
 #ifndef _AIS_PerpendicularRelation_HeaderFile
 #define _AIS_PerpendicularRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
 #include <AIS_Relation.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
-class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_PerpendicularRelation;
 DEFINE_STANDARD_HANDLE(AIS_PerpendicularRelation, AIS_Relation)
 
 //! A framework to display constraints of perpendicularity
@@ -40,10 +26,9 @@ DEFINE_STANDARD_HANDLE(AIS_PerpendicularRelation, AIS_Relation)
 //! datums can be edges or faces.
 class AIS_PerpendicularRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_PerpendicularRelation, AIS_Relation)
 public:
 
-  
   //! Constructs an object to display constraints of
   //! perpendicularity on shapes.
   //! This object is defined by a first shape aFShape, a
@@ -68,16 +53,6 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_PerpendicularRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
   
@@ -94,13 +69,6 @@ private:
   gp_Pnt myFAttach;
   gp_Pnt mySAttach;
 
-
 };
 
-
-
-
-
-
-
 #endif // _AIS_PerpendicularRelation_HeaderFile

src/AIS/AIS_Plane.cxx

@@ -43,7 +43,6 @@
 #include <Prs3d_ShadingAspect.hxx>
 #include <Quantity_Color.hxx>
 #include <Select3D_SensitiveTriangulation.hxx>
-#include <SelectBasics_EntityOwner.hxx>
 #include <SelectMgr_EntityOwner.hxx>
 #include <Standard_Type.hxx>
 #include <StdPrs_Plane.hxx>
@@ -387,7 +386,8 @@ void AIS_Plane::SetSize(const Standard_Real aXLength,
   
   
   myHasOwnSize = Standard_True;
-  Update();
+  SetToUpdate();
+  UpdatePresentations();
   UpdateSelection();
 }
 
@@ -418,7 +418,8 @@ void AIS_Plane::UnsetSize()
   }
   
   myHasOwnSize = Standard_False;
-  Update();
+  SetToUpdate();
+  UpdatePresentations();
   UpdateSelection();
 
 }

src/AIS/AIS_PlaneTrihedron.cxx

@@ -248,6 +248,7 @@ void AIS_PlaneTrihedron::SetColor(const Quantity_Color &aCol)
   myDrawer->SetColor (aCol);
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_XAxis)->SetColor(aCol);
   myDrawer->DatumAspect()->LineAspect(Prs3d_DP_YAxis)->SetColor(aCol);
+  SynchronizeAspects();
 }
 
 

src/AIS/AIS_PlaneTrihedron.hxx

@@ -89,7 +89,7 @@ public:
   virtual AIS_KindOfInteractive Type() const Standard_OVERRIDE { return AIS_KOI_Datum; }
 
   //! Allows you to provide settings for the color aColor.
-  Standard_EXPORT void SetColor (const Quantity_Color& theColor) Standard_OVERRIDE;
+  Standard_EXPORT virtual void SetColor (const Quantity_Color& theColor) Standard_OVERRIDE;
 
   void SetXLabel (const TCollection_AsciiString& theLabel) { myXLabel = theLabel; }
 

src/AIS/AIS_Point.cxx

@@ -31,7 +31,6 @@
 #include <Prs3d_Projector.hxx>
 #include <Quantity_Color.hxx>
 #include <Select3D_SensitivePoint.hxx>
-#include <SelectBasics_EntityOwner.hxx>
 #include <SelectMgr_EntityOwner.hxx>
 #include <Standard_Type.hxx>
 #include <StdPrs_Point.hxx>
@@ -124,7 +123,6 @@ void AIS_Point::ComputeSelection(const Handle(SelectMgr_Selection)& aSelection,
                                  const Standard_Integer /*aMode*/)
 {
   Handle(SelectMgr_EntityOwner) eown = new SelectMgr_EntityOwner(this,10);
-//  eown -> SelectBasics_EntityOwner::Set(5);
   Handle(Select3D_SensitivePoint) sp = new Select3D_SensitivePoint(eown,
 								   myComponent->Pnt());
   aSelection->Add(sp);
@@ -205,6 +203,29 @@ void AIS_Point::UnsetMarker()
       || theMode == -99;
 }
 
+//=======================================================================
+//function : replaceWithNewPointAspect
+//purpose  :
+//=======================================================================
+void AIS_Point::replaceWithNewPointAspect (const Handle(Prs3d_PointAspect)& theAspect)
+{
+  if (!myDrawer->HasLink())
+  {
+    myDrawer->SetPointAspect (theAspect);
+    return;
+  }
+
+  const Handle(Graphic3d_AspectMarker3d) anAspectOld = myDrawer->PointAspect()->Aspect();
+  const Handle(Graphic3d_AspectMarker3d) anAspectNew = !theAspect.IsNull() ? theAspect->Aspect() : myDrawer->Link()->PointAspect()->Aspect();
+  if (anAspectNew != anAspectOld)
+  {
+    myDrawer->SetPointAspect (theAspect);
+    Graphic3d_MapOfAspectsToAspects aReplaceMap;
+    aReplaceMap.Bind (anAspectOld, anAspectNew);
+    replaceAspects (aReplaceMap);
+  }
+}
+
 //=======================================================================
 //function : UpdatePointValues
 //purpose  : 
@@ -212,12 +233,14 @@ void AIS_Point::UnsetMarker()
 
 void AIS_Point::UpdatePointValues()
 {
-
-  if(!hasOwnColor && myOwnWidth==0.0 && !myHasTOM)
+  if (!hasOwnColor
+   &&  myOwnWidth == 0.0f
+   && !myHasTOM)
   {
-    myDrawer->SetPointAspect (Handle(Prs3d_PointAspect)());
+    replaceWithNewPointAspect (Handle(Prs3d_PointAspect)());
     return;
   }
+
   Quantity_Color      aCol (Quantity_NOC_YELLOW);
   Aspect_TypeOfMarker aTOM = Aspect_TOM_PLUS;
   Standard_Real       aScale = 1.0;
@@ -229,20 +252,20 @@ void AIS_Point::UpdatePointValues()
   }
 
   if(hasOwnColor) aCol = myDrawer->Color();
-  if(myOwnWidth!=0.0) aScale = myOwnWidth;
+  if(myOwnWidth != 0.0f) aScale = myOwnWidth;
   if(myHasTOM) aTOM = myTOM;
-  
-  
-  if(myDrawer->HasOwnPointAspect()){
-    // CLE
-    // const Handle(Prs3d_PointAspect) PA =  myDrawer->PointAspect();
+
+  if(myDrawer->HasOwnPointAspect())
+  {
     Handle(Prs3d_PointAspect) PA =  myDrawer->PointAspect();
-    // ENDCLE
     PA->SetColor(aCol);
     PA->SetTypeOfMarker(aTOM);
     PA->SetScale(aScale);
+    SynchronizeAspects();
   }
   else
-    myDrawer->SetPointAspect(new Prs3d_PointAspect(aTOM,aCol,aScale));
+  {
+    replaceWithNewPointAspect (new Prs3d_PointAspect (aTOM, aCol, aScale));
+  }
 }
 

src/AIS/AIS_Point.hxx

@@ -59,10 +59,10 @@ public:
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
   //! Allows you to provide settings for the Color.
-  Standard_EXPORT void SetColor (const Quantity_Color& theColor) Standard_OVERRIDE;
+  Standard_EXPORT virtual void SetColor (const Quantity_Color& theColor) Standard_OVERRIDE;
 
   //! Allows you to remove color settings.
-  Standard_EXPORT void UnsetColor() Standard_OVERRIDE;
+  Standard_EXPORT virtual void UnsetColor() Standard_OVERRIDE;
   
   //! Allows you to provide settings for a marker. These include
   //! -   type of marker,
@@ -91,6 +91,9 @@ private:
 
   Standard_EXPORT void UpdatePointValues();
 
+  //! Replace aspects of already computed groups with the new value.
+  void replaceWithNewPointAspect (const Handle(Prs3d_PointAspect)& theAspect);
+
 private:
 
   Handle(Geom_Point) myComponent;

src/AIS/AIS_PointCloud.cxx

@@ -24,7 +24,6 @@
 #include <Prs3d_Presentation.hxx>
 #include <Prs3d_Root.hxx>
 #include <Prs3d_ShadingAspect.hxx>
-#include <PrsMgr_ModedPresentation.hxx>
 #include <PrsMgr_Presentations.hxx>
 #include <Select3D_SensitiveBox.hxx>
 #include <Select3D_SensitivePrimitiveArray.hxx>

src/AIS/AIS_Relation.hxx

@@ -27,7 +27,6 @@
 #include <DsgPrs_ArrowSide.hxx>
 #include <gp_Pln.hxx>
 #include <gp_Pnt.hxx>
-#include <PrsMgr_TypeOfPresentation3d.hxx>
 #include <TCollection_ExtendedString.hxx>
 #include <TopoDS_Shape.hxx>
 

src/AIS/AIS_RotationMode.hxx

@@ -0,0 +1,33 @@
+// Copyright (c) 2019 OPEN CASCADE SAS
+//
+// This file is part of Open CASCADE Technology software library.
+//
+// This library is free software; you can redistribute it and/or modify it under
+// the terms of the GNU Lesser General Public License version 2.1 as published
+// by the Free Software Foundation, with special exception defined in the file
+// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
+// distribution for complete text of the license and disclaimer of any warranty.
+//
+// Alternatively, this file may be used under the terms of Open CASCADE
+// commercial license or contractual agreement.
+
+#ifndef _AIS_RotationMode_HeaderFile
+#define _AIS_RotationMode_HeaderFile
+
+//! Camera rotation mode.
+enum AIS_RotationMode
+{
+  AIS_RotationMode_BndBoxActive, //!< default OCCT rotation
+  AIS_RotationMode_PickLast,     //!< rotate around last picked point
+  AIS_RotationMode_PickCenter,   //!< rotate around point at the center of window
+  AIS_RotationMode_CameraAt,     //!< rotate around camera center
+  AIS_RotationMode_BndBoxScene,  //!< rotate around scene center
+};
+
+enum
+{
+  AIS_RotationMode_LOWER = 0,
+  AIS_RotationMode_UPPER = AIS_RotationMode_BndBoxScene,
+};
+
+#endif // _AIS_RotationMode_HeaderFile

src/AIS/AIS_Selection.cxx

@@ -39,6 +39,11 @@ AIS_Selection::AIS_Selection()
 //=======================================================================
 void AIS_Selection::Clear()
 {
+  for (AIS_NListOfEntityOwner::Iterator aSelIter (Objects()); aSelIter.More(); aSelIter.Next())
+  {
+    const Handle(SelectMgr_EntityOwner) anObject = aSelIter.Value();
+    anObject->SetSelected (Standard_False);
+  }
   myresult.Clear();
   myResultMap.Clear();
   myIterator = AIS_NListOfEntityOwner::Iterator();
@@ -61,6 +66,7 @@ AIS_SelectStatus AIS_Selection::Select (const Handle(SelectMgr_EntityOwner)& the
     AIS_NListOfEntityOwner::Iterator aListIter;
     myresult.Append  (theObject, aListIter);
     myResultMap.Bind (theObject, aListIter);
+    theObject->SetSelected (Standard_True);
     return AIS_SS_Added;
   }
 
@@ -87,6 +93,7 @@ AIS_SelectStatus AIS_Selection::Select (const Handle(SelectMgr_EntityOwner)& the
 
   myresult.Remove (aListIter);
   myResultMap.UnBind (theObject);
+  theObject->SetSelected (Standard_False);
 
   // update list iterator for next object in <myresult> list if any
   if (aListIter.More())
@@ -120,5 +127,6 @@ AIS_SelectStatus AIS_Selection::AddSelect (const Handle(SelectMgr_EntityOwner)&
   AIS_NListOfEntityOwner::Iterator aListIter;
   myresult.Append  (theObject, aListIter);
   myResultMap.Bind (theObject, aListIter);
+  theObject->SetSelected (Standard_True);
   return AIS_SS_Added;
 }

src/AIS/AIS_Shape.cxx

@@ -48,7 +48,6 @@
 #include <Prs3d_ShadingAspect.hxx>
 #include <StdPrs_BndBox.hxx>
 #include <StdPrs_ToolTriangulatedShape.hxx>
-#include <PrsMgr_ModedPresentation.hxx>
 #include <Quantity_Color.hxx>
 #include <Select3D_SensitiveBox.hxx>
 #include <Select3D_SensitiveEntity.hxx>
@@ -68,15 +67,6 @@
 
 IMPLEMENT_STANDARD_RTTIEXT(AIS_Shape,AIS_InteractiveObject)
 
-static Standard_Boolean IsInList(const TColStd_ListOfInteger& LL, const Standard_Integer aMode)
-{
-  TColStd_ListIteratorOfListOfInteger It(LL);
-  for(;It.More();It.Next()){
-    if(It.Value()==aMode) 
-      return Standard_True;}
-  return Standard_False;
-}
-
 // Auxiliary macros
 #define replaceAspectWithDef(theMap, theAspect) \
   if (myDrawer->Link()->theAspect()->Aspect() != myDrawer->theAspect()->Aspect()) \
@@ -411,8 +401,6 @@ void AIS_Shape::SetColor (const Quantity_Color& theColor)
   myDrawer->SetColor (theColor);
   hasOwnColor = Standard_True;
 
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
   if (!toRecompute
    || !myDrawer->HasLink())
   {
@@ -432,8 +420,6 @@ void AIS_Shape::SetColor (const Quantity_Color& theColor)
 
 void AIS_Shape::UnsetColor()
 {
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
   if (!HasColor())
   {
     return;
@@ -578,10 +564,8 @@ bool AIS_Shape::setWidth (const Handle(Prs3d_Drawer)& theDrawer,
 
 void AIS_Shape::SetWidth (const Standard_Real theLineWidth)
 {
-  myOwnWidth = theLineWidth;
+  myOwnWidth = (Standard_ShortReal )theLineWidth;
 
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
   if (!setWidth (myDrawer, theLineWidth)
    || !myDrawer->HasLink())
   {
@@ -601,14 +585,12 @@ void AIS_Shape::SetWidth (const Standard_Real theLineWidth)
 
 void AIS_Shape::UnsetWidth()
 {
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
-  if (myOwnWidth == 0.0)
+  if (myOwnWidth == 0.0f)
   {
     return;
   }
 
-  myOwnWidth = 0.0;
+  myOwnWidth = 0.0f;
   if (!HasColor())
   {
     Graphic3d_MapOfAspectsToAspects aReplaceMap;
@@ -681,8 +663,6 @@ void AIS_Shape::SetMaterial (const Graphic3d_MaterialAspect& theMat)
   setMaterial (myDrawer, theMat, HasColor(), IsTransparent());
   hasOwnMaterial = Standard_True;
 
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
   if (!toRecompute
    || !myDrawer->HasLink())
   {
@@ -701,8 +681,6 @@ void AIS_Shape::SetMaterial (const Graphic3d_MaterialAspect& theMat)
 
 void AIS_Shape::UnsetMaterial()
 {
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
   if (!HasMaterial())
   {
     return;
@@ -761,8 +739,6 @@ void AIS_Shape::SetTransparency (const Standard_Real theValue)
   setTransparency (myDrawer, theValue);
   myDrawer->SetTransparency ((Standard_ShortReal )theValue);
 
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
   if (!toRecompute
    || !myDrawer->HasLink())
   {
@@ -781,9 +757,6 @@ void AIS_Shape::SetTransparency (const Standard_Real theValue)
 
 void AIS_Shape::UnsetTransparency()
 {
-  myRecomputeEveryPrs = false; // no mode to recalculate, only viewer update
-  myToRecomputeModes.Clear();
-
   myDrawer->SetTransparency (0.0f);
   if (!myDrawer->HasOwnShadingAspect())
   {
@@ -805,18 +778,6 @@ void AIS_Shape::UnsetTransparency()
   }
 }
 
-//=======================================================================
-//function : LoadRecomputable
-//purpose  : 
-//=======================================================================
-
-void AIS_Shape::LoadRecomputable(const Standard_Integer TheMode)
-{
-  myRecomputeEveryPrs = Standard_False;
-  if(!IsInList(myToRecomputeModes,TheMode))
-    myToRecomputeModes.Append(TheMode);
-}
-
 //=======================================================================
 //function : BoundingBox
 //purpose  : 
@@ -903,8 +864,7 @@ Standard_Boolean AIS_Shape::SetOwnHLRDeviationAngle ()
 void AIS_Shape::SetOwnDeviationCoefficient ( const Standard_Real  aCoefficient )
 {
   myDrawer->SetDeviationCoefficient( aCoefficient );
-  SetToUpdate(0) ; // WireFrame
-  SetToUpdate(1) ; // Shadding
+  SetToUpdate();
 }
 
 //=======================================================================
@@ -923,11 +883,10 @@ void AIS_Shape::SetOwnHLRDeviationCoefficient ( const Standard_Real  aCoefficien
 //purpose  : 
 //=======================================================================
 
-void AIS_Shape::SetOwnDeviationAngle ( const Standard_Real  anAngle )
+void AIS_Shape::SetOwnDeviationAngle (const Standard_Real theAngle)
 {
-
-  myDrawer->SetDeviationAngle(anAngle );
-  SetToUpdate(0) ;   // WireFrame
+  myDrawer->SetDeviationAngle (theAngle);
+  SetToUpdate (AIS_WireFrame);
 }
 //=======================================================================
 //function : SetOwnDeviationAngle
@@ -941,8 +900,7 @@ void AIS_Shape::SetAngleAndDeviation ( const Standard_Real  anAngle )
   SetOwnDeviationAngle(anAngle) ;
   SetOwnDeviationCoefficient(OutDefl) ;
   myInitAng = anAngle;
-  SetToUpdate(0);
-  SetToUpdate(1);
+  SetToUpdate();
 }
 
 //=======================================================================

src/AIS/AIS_Shape.hxx

@@ -302,8 +302,6 @@ protected:
   Standard_EXPORT virtual void ComputeSelection (const Handle(SelectMgr_Selection)& theSelection,
                                                  const Standard_Integer theMode) Standard_OVERRIDE;
   
-  Standard_EXPORT void LoadRecomputable (const Standard_Integer TheMode);
-  
   //! Create own aspects (if they do not exist) and set color to them.
   //! @return TRUE if new aspects have been created
   Standard_EXPORT bool setColor (const Handle(Prs3d_Drawer)& theDrawer, const Quantity_Color& theColor) const;

src/AIS/AIS_SymmetricRelation.hxx

@@ -17,25 +17,11 @@
 #ifndef _AIS_SymmetricRelation_HeaderFile
 #define _AIS_SymmetricRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
 #include <TopoDS_Shape.hxx>
 #include <gp_Pnt.hxx>
 #include <gp_Dir.hxx>
 #include <AIS_Relation.hxx>
-#include <Standard_Boolean.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <Standard_Integer.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
-class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_SymmetricRelation;
 DEFINE_STANDARD_HANDLE(AIS_SymmetricRelation, AIS_Relation)
 
 //! A framework to display constraints of symmetricity
@@ -44,10 +30,9 @@ DEFINE_STANDARD_HANDLE(AIS_SymmetricRelation, AIS_Relation)
 //! shapes of which the datums are parts.
 class AIS_SymmetricRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_SymmetricRelation, AIS_Relation)
 public:
 
-  
   //! Constructs an object to display constraints of symmetricity.
   //! This object is defined by a tool aSymmTool, a first
   //! shape FirstShape, a second shape SecondShape, and a plane aPlane.
@@ -79,19 +64,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_SymmetricRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -110,14 +84,8 @@ private:
   gp_Dir myFDirAttach;
   gp_Dir myAxisDirAttach;
 
-
 };
 
-
 #include <AIS_SymmetricRelation.lxx>
 
-
-
-
-
 #endif // _AIS_SymmetricRelation_HeaderFile

src/AIS/AIS_TangentRelation.hxx

@@ -17,24 +17,8 @@
 #ifndef _AIS_TangentRelation_HeaderFile
 #define _AIS_TangentRelation_HeaderFile
 
-#include <Standard.hxx>
-#include <Standard_Type.hxx>
-
-#include <gp_Pnt.hxx>
-#include <gp_Dir.hxx>
-#include <Standard_Real.hxx>
-#include <Standard_Integer.hxx>
 #include <AIS_Relation.hxx>
-#include <PrsMgr_PresentationManager3d.hxx>
-#include <SelectMgr_Selection.hxx>
-class TopoDS_Shape;
-class Geom_Plane;
-class Prs3d_Presentation;
-class Prs3d_Projector;
-class Geom_Transformation;
 
-
-class AIS_TangentRelation;
 DEFINE_STANDARD_HANDLE(AIS_TangentRelation, AIS_Relation)
 
 //! A framework to display tangency constraints between
@@ -42,10 +26,9 @@ DEFINE_STANDARD_HANDLE(AIS_TangentRelation, AIS_Relation)
 //! The datums are normally faces or edges.
 class AIS_TangentRelation : public AIS_Relation
 {
-
+  DEFINE_STANDARD_RTTIEXT(AIS_TangentRelation, AIS_Relation)
 public:
 
-  
   //! TwoFacesTangent or TwoEdgesTangent relation
   //! Constructs an object to display tangency constraints.
   //! This object is defined by the first shape aFShape, the
@@ -79,19 +62,8 @@ public:
   //! to the object to display before computation  !!!
   Standard_EXPORT virtual void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Geom_Transformation)& aTrsf, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
 
-
-
-
-  DEFINE_STANDARD_RTTIEXT(AIS_TangentRelation,AIS_Relation)
-
-protected:
-
-
-
-
 private:
 
-  
   Standard_EXPORT void Compute (const Handle(PrsMgr_PresentationManager3d)& aPresentationManager, const Handle(Prs3d_Presentation)& aPresentation, const Standard_Integer aMode = 0) Standard_OVERRIDE;
   
   Standard_EXPORT void Compute (const Handle(Prs3d_Projector)& aProjector, const Handle(Prs3d_Presentation)& aPresentation) Standard_OVERRIDE;
@@ -107,13 +79,6 @@ private:
   Standard_Real myLength;
   Standard_Integer myExternRef;
 
-
 };
 
-
-
-
-
-
-
 #endif // _AIS_TangentRelation_HeaderFile