0027257: Visualization, TKOpenGl - bind integer vertex attributes

Technical docs are reviewed to:
* update references to page with third-party products
* update description of persistence, handles, and RTTI according to changes in OCCT 7.0
* remove references to CDL, WOK, and WOK-generated stuff
* update the list of environment variables

CMakeLists.txt

@@ -6,8 +6,8 @@ set (CMAKE_CONFIGURATION_TYPES Release Debug RelWithDebInfo CACHE INTERNAL "" FO
 
 # macro: include patched file if it exists
 macro (OCCT_INCLUDE_CMAKE_FILE BEING_INCLUDED_FILE)
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${BEING_INCLUDED_FILE}.cmake")
-    include (${APPLY_OCCT_PATCH_DIR}/${BEING_INCLUDED_FILE}.cmake)
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${BEING_INCLUDED_FILE}.cmake")
+    include (${BUILD_PATCH}/${BEING_INCLUDED_FILE}.cmake)
   else()
     include (${CMAKE_SOURCE_DIR}/${BEING_INCLUDED_FILE}.cmake)
   endif()
@@ -31,10 +31,27 @@ endif()
 # the name of the project
 project (OCCT)
 
+# include occt macros
+OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
+
 # Solution folder property
 set_property (GLOBAL PROPERTY USE_FOLDERS ON)
 
-set (INSTALL_OCCT_TEST_CASES OFF CACHE BOOL "${INSTALL_OCCT_TEST_CASES_DESCR}")
+# get current OCCT version
+OCC_VERSION (OCC_VERSION_MAJOR OCC_VERSION_MINOR OCC_VERSION_MAINTENANCE OCC_VERSION_DEVELOPMENT OCC_VERSION_STRING_EXT)
+
+set_property (GLOBAL PROPERTY OCC_VERSION_MAJOR ${OCC_VERSION_MAJOR})
+set_property (GLOBAL PROPERTY OCC_VERSION_MINOR ${OCC_VERSION_MINOR})
+set_property (GLOBAL PROPERTY OCC_VERSION_MAINTENANCE ${OCC_VERSION_MAINTENANCE})
+
+set (INSTALL_TEST_CASES OFF CACHE BOOL "${INSTALL_TEST_CASES_DESCR}")
+
+# single-configuration generator
+set (SINGLE_GENERATOR OFF)
+if (CMAKE_BUILD_TYPE)
+  set (SINGLE_GENERATOR ON)
+endif()
+
 # a single-configuration generator like the Makefile generator defines CMAKE_BUILD_TYPE variable
 # check this variable and set if it's required
 if (DEFINED CMAKE_BUILD_TYPE AND NOT CMAKE_BUILD_TYPE) # single-configuration generator.
@@ -42,19 +59,127 @@ if (DEFINED CMAKE_BUILD_TYPE AND NOT CMAKE_BUILD_TYPE) # single-configuration ge
 endif()
 
 # enable extended messages of many OCCT algorithms
-set (OCCT_ALGO_EXTENDED_OUTPUT OFF CACHE BOOL "${OCCT_ALGO_EXTENDED_OUTPUT_DESCR}")
-if (OCCT_ALGO_EXTENDED_OUTPUT)
+set (BUILD_WITH_DEBUG OFF CACHE BOOL "${BUILD_WITH_DEBUG_DESCR}")
+if (BUILD_WITH_DEBUG)
   add_definitions (-DOCCT_DEBUG)
 endif()
 
 # copy samples to install directory
-set (INSTALL_OCCT_SAMPLES OFF CACHE BOOL "${INSTALL_OCCT_SAMPLES_DESCR}")
+set (INSTALL_SAMPLES OFF CACHE BOOL "${INSTALL_SAMPLES_DESCR}")
 
-# install dir of the built project
-set (INSTALL_DIR "" CACHE PATH "${INSTALL_DIR_DESCR}" )
-set (CMAKE_INSTALL_PREFIX "${INSTALL_DIR}" CACHE INTERNAL "" FORCE )
+# install dir of the project
+if (NOT DEFINED INSTALL_DIR)
+  set (INSTALL_DIR "${CMAKE_INSTALL_PREFIX}" CACHE PATH "${INSTALL_DIR_DESCR}")
+endif()
 
-set (APPLY_OCCT_PATCH_DIR "" CACHE PATH "${APPLY_OCCT_PATCH_DIR_DESCR}")
+if (NOT DEFINED CMAKE_INSTALL_PREFIX_PREV)
+  set (CMAKE_INSTALL_PREFIX_PREV "${CMAKE_INSTALL_PREFIX}" CACHE INTERNAL "" FORCE)
+elseif (NOT "${CMAKE_INSTALL_PREFIX_PREV}" STREQUAL "${CMAKE_INSTALL_PREFIX}")
+  # CMAKE_INSTALL_PREFIX has been changed at previous step
+  set (CMAKE_INSTALL_PREFIX_PREV "${CMAKE_INSTALL_PREFIX}" CACHE INTERNAL "" FORCE)
+  
+  # INSTALL_DIR is required to be updated
+  set (INSTALL_DIR "${CMAKE_INSTALL_PREFIX}" CACHE PATH "${INSTALL_DIR_DESCR}" FORCE)
+endif()
+
+if (NOT DEFINED INSTALL_DIR_PREV)
+  set (INSTALL_DIR_PREV "${INSTALL_DIR}" CACHE INTERNAL "" FORCE)
+elseif (NOT "${INSTALL_DIR_PREV}" STREQUAL "${INSTALL_DIR}")
+  # INSTALL_DIR has been changed at previous step
+  set (INSTALL_DIR_PREV "${INSTALL_DIR}" CACHE INTERNAL "" FORCE)
+
+  # sync CMAKE_INSTALL_PREFIX with INSTALL_DIR 
+  set (CMAKE_INSTALL_PREFIX "${INSTALL_DIR}" CACHE INTERNAL "" FORCE)
+
+  # set CMAKE_INSTALL_PREFIX_PREV to avoid the reset of structure of the install folder 
+  set (CMAKE_INSTALL_PREFIX_PREV "${INSTALL_DIR}" CACHE INTERNAL "" FORCE)
+
+  # The structure of install folder should be reset
+  OCCT_CHECK_AND_UNSET (INSTALL_BIN_DIR)
+  OCCT_CHECK_AND_UNSET (INSTALL_SCRIPT_DIR)
+  OCCT_CHECK_AND_UNSET (INSTALL_LIB_DIR)
+  OCCT_CHECK_AND_UNSET (INSTALL_INCLUDE_DIR)
+  OCCT_CHECK_AND_UNSET (INSTALL_OCCT_RESOURCE_DIR)
+  OCCT_CHECK_AND_UNSET (INSTALL_SHARE_DIR)
+endif()
+
+# hide CMAKE_INSTALL_PREFIX from a user
+set (CMAKE_INSTALL_PREFIX "${INSTALL_DIR}" CACHE INTERNAL "" FORCE)
+
+set (BIN_LETTER "")
+if ("${CMAKE_BUILD_TYPE}" STREQUAL "Debug")
+  set (BIN_LETTER "d")
+elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "RelWithDebInfo")
+  set (BIN_LETTER "i")
+endif()
+
+# Get all used variables: OS_WITH_BIT, COMPILER
+OCCT_MAKE_OS_WITH_BITNESS()
+OCCT_MAKE_COMPILER_SHORT_NAME()
+
+# do not define INSTALL_BIN_DIR for win. 
+# Leave library structure for win: <prefix>/win64/vc10/bin(d)
+if (NOT DEFINED INSTALL_BIN_DIR)
+  if (UNIX)
+    set (INSTALL_BIN_DIR "${INSTALL_DIR}/bin" CACHE PATH "${INSTALL_BIN_DIR_DESCR}")
+  else()
+    if (SINGLE_GENERATOR)
+      set (INSTALL_BIN_DIR "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin${BIN_LETTER}" CACHE PATH "${INSTALL_BIN_DIR_DESCR}")
+    endif()
+  endif()
+endif()
+
+# define folder contaning all shell/batch scripts
+if (NOT DEFINED INSTALL_SCRIPT_DIR)
+  if (UNIX)
+    set (INSTALL_SCRIPT_DIR "${INSTALL_BIN_DIR}/opencascade-${OCC_VERSION_STRING_EXT}" CACHE PATH "${INSTALL_SCRIPT_DIR_DESCR}")
+  else()
+    set (INSTALL_SCRIPT_DIR "${INSTALL_DIR}" CACHE PATH "${INSTALL_SCRIPT_DIR_DESCR}")
+  endif()
+endif()
+
+# place the libraries to <prefix>/lib folder for unix and leave old structure for windows
+if (NOT DEFINED INSTALL_LIB_DIR)
+  if (UNIX)
+    set (INSTALL_LIB_DIR "${INSTALL_DIR}/lib" CACHE PATH "${INSTALL_LIB_DIR_DESCR}")
+  else()
+    if (SINGLE_GENERATOR)
+      set (INSTALL_LIB_DIR "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib${BIN_LETTER}" CACHE PATH "${INSTALL_LIB_DIR_DESCR}")
+    endif()
+  endif()
+endif()
+
+# OCCT headers: <prefix>/inc for windows,
+#               <prefix>/include/opencascade-7.0.0 for unix
+if (NOT DEFINED INSTALL_INCLUDE_DIR)
+  if (UNIX)
+    set (INSTALL_INCLUDE_DIR "${INSTALL_DIR}/include/opencascade-${OCC_VERSION_STRING_EXT}" CACHE PATH "${INSTALL_INCLUDE_DIR_DESCR}")
+  else()
+    set (INSTALL_INCLUDE_DIR "${INSTALL_DIR}/inc" CACHE PATH "${INSTALL_INCLUDE_DIR_DESCR}")
+  endif()
+endif()
+
+# OCCT resources: <prefix>/src for windows,
+#                 <prefix>/share/opencascade-7.0.0/resources for unix
+if (NOT DEFINED INSTALL_OCCT_RESOURCE_DIR)
+  if (UNIX)
+    set (INSTALL_OCCT_RESOURCE_DIR "${INSTALL_DIR}/share/opencascade-${OCC_VERSION_STRING_EXT}/resources" CACHE PATH "${INSTALL_OCCT_RESOURCE_DIR_DESCR}")
+  else()
+    set (INSTALL_OCCT_RESOURCE_DIR "${INSTALL_DIR}/src" CACHE PATH "${INSTALL_OCCT_RESOURCE_DIR_DESCR}")
+  endif()
+endif()
+
+# OCCT data
+if (NOT DEFINED INSTALL_SHARE_DIR)
+  if (UNIX)
+    set (INSTALL_SHARE_DIR "${INSTALL_DIR}/share/opencascade-${OCC_VERSION_STRING_EXT}" CACHE PATH "${INSTALL_SHARE_DIR_DESCR}")
+  else()
+    set (INSTALL_SHARE_DIR "${INSTALL_DIR}" CACHE PATH "${INSTALL_SHARE_DIR_DESCR}")
+  endif()
+endif()
+
+# a directory recognized as a 'patch' for OCCT
+set (BUILD_PATCH "" CACHE PATH "${BUILD_PATCH_DESCR}")
 
 # the list of being built toolkits
 set (BUILD_ADDITIONAL_TOOLKITS "" CACHE STRING "${BUILD_ADDITIONAL_TOOLKITS_DESCR}")
@@ -68,15 +193,11 @@ endif()
 if (APPLE)
   set (USE_GLX OFF CACHE BOOL "${USE_GLX_DESCR}")
 endif()
+
 if (WIN32)
   set (USE_D3D OFF CACHE BOOL "${USE_D3D_DESCR}")
 endif()
 
-set (USE_VTK OFF CACHE BOOL "${USE_VTK_DESCR}")
-
-# include occt macros
-OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
-
 # include the patched or original list of modules
 # list <MODULENAME>_TOOLKITS is created foreach module and contains its toolkits
 # list <OCCT_MODULES> will contain all modules
@@ -86,14 +207,14 @@ foreach (OCCT_MODULE ${OCCT_MODULES})
   BUILD_MODULE (${OCCT_MODULE})
 endforeach()
 
+if (ANDROID AND BUILD_MODULE_Draw)
+  message (STATUS "Info. Draw module is turned off due to it is not supported on Android")
+  set (BUILD_MODULE_Draw OFF CACHE BOOL "${BUILD_MODULE_Draw_DESCR}" FORCE)
+endif()
+
 # Overview
 set (BUILD_DOC_OcctOverview OFF CACHE BOOL "${BUILD_DOC_OcctOverview_DESCR}")
 
-if (NOT USE_VTK)
-  list (REMOVE_ITEM Visualization_TOOLKITS TKIVtk)
-  list (REMOVE_ITEM Draw_TOOLKITS TKIVtkDraw)
-endif()
-
 if (NOT USE_D3D)
   list (REMOVE_ITEM Visualization_TOOLKITS TKD3DHost)
 endif()
@@ -116,7 +237,7 @@ endif()
 # accumulate all used toolkits
 list (REMOVE_DUPLICATES BUILD_TOOLKITS)
 set (RAW_BUILD_TOOLKITS)
-foreach(BUILD_TOOLKIT ${BUILD_TOOLKITS})
+foreach (BUILD_TOOLKIT ${BUILD_TOOLKITS})
   OCCT_TOOLKIT_FULL_DEP (${BUILD_TOOLKIT} TOOLKIT_FULL_DEPS)
   list (APPEND RAW_BUILD_TOOLKITS ${BUILD_TOOLKIT} ${TOOLKIT_FULL_DEPS})
 endforeach()
@@ -129,35 +250,39 @@ OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_defs_flags")
 
 OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/3rdparty_macro")
 
+# search for TKIVtk and TKIVtkDraw in BUILD_TOOLKITS
+list (FIND BUILD_TOOLKITS TKIVtk CAN_USE_VTK)
+if (CAN_USE_VTK EQUAL -1)
+  list (FIND BUILD_TOOLKITS TKIVtkDraw CAN_USE_VTK)
+endif()
+
+if (NOT CAN_USE_VTK EQUAL -1)
+  if (NOT DEFINED USE_VTK)
+    set (USE_VTK OFF CACHE BOOL "${USE_VTK_DESCR}")
+  endif()
+else()
+  OCCT_CHECK_AND_UNSET (USE_VTK)
+endif()
+
 # Rebuild *.yacc and *.lex files that are contained by TKMath toolkit
 list (FIND BUILD_TOOLKITS TKMath   CAN_REBUILD_PDC_FOR_TKMATH)
 list (FIND BUILD_TOOLKITS StepFile CAN_REBUILD_PDC_FOR_STEPFILE)
 
-if (NOT "${CAN_REBUILD_PDC_FOR_TKMATH}" STREQUAL "-1" OR NOT "${CAN_REBUILD_PDC_FOR_STEPFILE}" STREQUAL "-1")
-  set (REBUILD_PLATFORM_DEPENDENT_CODE OFF CACHE BOOL "${REBUILD_PLATFORM_DEPENDENT_CODE_DESCR}")
+if (NOT ${CAN_REBUILD_PDC_FOR_TKMATH} EQUAL -1 OR NOT ${CAN_REBUILD_PDC_FOR_STEPFILE} EQUAL -1)
+  set (BUILD_YACCLEX OFF CACHE BOOL "${BUILD_YACCLEX_DESCR}")
 else()
-  OCCT_CHECK_AND_UNSET (REBUILD_PLATFORM_DEPENDENT_CODE)
+  OCCT_CHECK_AND_UNSET (BUILD_YACCLEX)
 endif()
 
 if (NOT DEFINED 3RDPARTY_DIR)
   set (3RDPARTY_DIR "" CACHE PATH ${3RDPARTY_DIR_DESCR})
-endif()
-
-# search for 3rdparty dir
-if ("${3RDPARTY_DIR}" STREQUAL "")
-  if (DEFINED ENV{3RDPARTY_DIR})
-    set (3RDPARTY_DIR "$ENV{3RDPARTY_DIR}" CACHE PATH ${3RDPARTY_DIR_DESCR} FORCE)
-  elseif (EXISTS "${CMAKE_SOURCE_DIR}/../")
-    # in version 6.7.0 and above, occt parent directory contains 3rdparties
-    get_filename_component (3RDPARTY_DIR "${CMAKE_SOURCE_DIR}/../" ABSOLUTE)
-    set (3RDPARTY_DIR "${3RDPARTY_DIR}" CACHE PATH ${3RDPARTY_DIR_DESCR} FORCE)
-  endif()
+  get_filename_component (3RDPARTY_DIR "${3RDPARTY_DIR}" ABSOLUTE)
 endif()
 
 # search for CSF_TclLibs variable in EXTERNLIB of each being used toolkit
 OCCT_IS_PRODUCT_REQUIRED (CSF_TclLibs USE_TCL)
 
-if ("${USE_TCL}" STREQUAL ON)
+if (USE_TCL)
   message (STATUS "Info: TCL is used by OCCT")
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/tcl")
   
@@ -174,7 +299,7 @@ endif()
 # search for CSF_FREETYPE variable in EXTERNLIB of each being used toolkit
 OCCT_IS_PRODUCT_REQUIRED (CSF_FREETYPE USE_FREETYPE)
 
-if ("${USE_FREETYPE}" STREQUAL ON)
+if (USE_FREETYPE)
   message (STATUS "Info: Freetype is used by OCCT")
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/freetype")
 else()
@@ -190,7 +315,13 @@ if (USE_VTK)
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/vtk")
 else()
   OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_VTK")
-  OCCT_CHECK_AND_UNSET ("INSTALL_VTK")
+  
+  if (NOT CAN_USE_VTK EQUAL -1)
+    message (STATUS "Info: TKIVtk and TKIVtkDraw toolkits excluded due to VTK usage is disabled")
+
+    list (REMOVE_ITEM BUILD_TOOLKITS TKIVtk)
+    list (REMOVE_ITEM BUILD_TOOLKITS TKIVtkDraw)
+  endif()
 endif()
 
 # D3D
@@ -285,9 +416,12 @@ if (BUILD_DOC_OcctOverview)
   endif()
 
   if (INSTALL_DOC_OcctOverview)
-    install (DIRECTORY "${CMAKE_BINARY_DIR}/doc/overview" DESTINATION  "${INSTALL_DIR}/doc")
+    install (DIRECTORY "${CMAKE_BINARY_DIR}/doc/overview" DESTINATION  "${INSTALL_SHARE_DIR}/doc")
 
-    OCCT_INSTALL_FILE_OR_DIR ("dox/resources/overview.html" "${INSTALL_DIR}")
+    # create overview.html only for windows
+    if (WIN32)
+      OCCT_INSTALL_FILE_OR_DIR ("dox/resources/overview.html" "${INSTALL_SCRIPT_DIR}")
+    endif()
   endif()
 
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/doxygen")
@@ -295,18 +429,18 @@ else()
   OCCT_CHECK_AND_UNSET ("INSTALL_DOC_OcctOverview")
 
   OCCT_CHECK_AND_UNSET ("3RDPARTY_DOXYGEN_EXECUTABLE")
-  OCCT_CHECK_AND_UNSET ("3RDPARTY_DOXYGEN_DOT_EXECUTABLE")
+  OCCT_CHECK_AND_UNSET ("3RDPARTY_DOT_EXECUTABLE")
 endif()
 
 # bison 
-if (REBUILD_PLATFORM_DEPENDENT_CODE)
+if (BUILD_YACCLEX)
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/bison")
 else()
   OCCT_CHECK_AND_UNSET ("3RDPARTY_BISON_EXECUTABLE")
 endif()
 
 # flex 
-if (REBUILD_PLATFORM_DEPENDENT_CODE)
+if (BUILD_YACCLEX)
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/flex")
 else()
   OCCT_CHECK_AND_UNSET ("3RDPARTY_FLEX_EXECUTABLE")
@@ -322,7 +456,7 @@ endif()
 if (3RDPARTY_INCLUDE_DIRS)
   list (REMOVE_DUPLICATES 3RDPARTY_INCLUDE_DIRS)
   string (REGEX REPLACE ";" "\n\t" 3RDPARTY_INCLUDE_DIRS_WITH_ENDS "${3RDPARTY_INCLUDE_DIRS}")
-  message (STATUS "The directories containing 3rdparty headers: ${3RDPARTY_INCLUDE_DIRS_WITH_ENDS}")
+  message (STATUS "Info: The directories of 3rdparty headers: ${3RDPARTY_INCLUDE_DIRS_WITH_ENDS}")
   include_directories (${3RDPARTY_INCLUDE_DIRS})
 endif()
 
@@ -332,14 +466,10 @@ include_directories (${CMAKE_BINARY_DIR}/inc)
 if (3RDPARTY_LIBRARY_DIRS)
   list (REMOVE_DUPLICATES 3RDPARTY_LIBRARY_DIRS)
   string (REGEX REPLACE ";" "\n\t" 3RDPARTY_LIBRARY_DIRS_WITH_ENDS "${3RDPARTY_LIBRARY_DIRS}")
-  message (STATUS "The directories containing 3rdparty libraries: ${3RDPARTY_LIBRARY_DIRS_WITH_ENDS}")
+  message (STATUS "Info: The directories of 3rdparty libraries: ${3RDPARTY_LIBRARY_DIRS_WITH_ENDS}")
   link_directories (${3RDPARTY_LIBRARY_DIRS})
 endif()
 
-# Get all used variables: OS_WITH_BIT, COMPILER
-OCCT_MAKE_OS_WITH_BITNESS()
-OCCT_MAKE_COMPILER_SHORT_NAME()
-
 # build directories
 set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
 set (CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
@@ -359,29 +489,33 @@ if (WIN32)
   set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_DEBUG          "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
 endif()
 
-if ("${INSTALL_DIR}" STREQUAL "")
-  get_filename_component (CMAKE_BINARY_DIR_PARENT ${CMAKE_BINARY_DIR} DIRECTORY)
-
-  set (INSTALL_DIR "${CMAKE_BINARY_DIR_PARENT}/install" CACHE PATH "${INSTALL_DIR_DESCR}" FORCE)
-  set (CMAKE_INSTALL_PREFIX "${INSTALL_DIR}" CACHE INTERNAL "" FORCE )
-
-  message (STATUS "Info: INSTALL_DIR has been set as ${INSTALL_DIR}")
-endif()
-
-message (STATUS "\nInfo: Collecting all OCCT header files into ${CMAKE_BINARY_DIR}/inc ...")
+string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
+message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT header files into ${CMAKE_BINARY_DIR}/inc ...")
 
 # collect all the headers to <binary dir>/inc folder
 COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOLKITS}")
 
-OCCT_INSTALL_FILE_OR_DIR ("data" "${INSTALL_DIR}")
-OCCT_INSTALL_FILE_OR_DIR ("samples/tcl" "${INSTALL_DIR}/samples")
+string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
+message (STATUS "Info: \(${CURRENT_TIME}\) End the collecting")
 
-if (INSTALL_OCCT_SAMPLES)
-  OCCT_INSTALL_FILE_OR_DIR ("samples" "${INSTALL_DIR}")
+OCCT_INSTALL_FILE_OR_DIR ("data" "${INSTALL_SHARE_DIR}")
+
+# OCCT samples
+if (INSTALL_SAMPLES)
+  if (WIN32)
+    OCCT_INSTALL_FILE_OR_DIR ("samples/CSharp" "${INSTALL_SHARE_DIR}/samples")
+    OCCT_INSTALL_FILE_OR_DIR ("samples/mfc" "${INSTALL_SHARE_DIR}/samples")   
+  endif()
+  
+  OCCT_INSTALL_FILE_OR_DIR ("samples/java" "${INSTALL_SHARE_DIR}/samples")
+  OCCT_INSTALL_FILE_OR_DIR ("samples/ocafsamples" "${INSTALL_SHARE_DIR}/samples")
+  OCCT_INSTALL_FILE_OR_DIR ("samples/qt" "${INSTALL_SHARE_DIR}/samples")
 endif()
 
-if (INSTALL_OCCT_TEST_CASES)
-  OCCT_INSTALL_FILE_OR_DIR ("tests" "${INSTALL_DIR}")
+OCCT_INSTALL_FILE_OR_DIR ("samples/tcl" "${INSTALL_SHARE_DIR}/samples")
+
+if (INSTALL_TEST_CASES)
+  OCCT_INSTALL_FILE_OR_DIR ("tests" "${INSTALL_SHARE_DIR}")
 endif()
 
 if (WIN32)
@@ -390,14 +524,16 @@ else()
   set (SCRIPT_EXT sh)
 endif()
 
-# DRAW.BAT or DRAW.SH
-if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/adm/templates/draw.${SCRIPT_EXT}")
-  install (FILES "${APPLY_OCCT_PATCH_DIR}/adm/templates/draw.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR}" PERMISSIONS
-          OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
+# copy draw script to install script folder
+if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/draw.${SCRIPT_EXT}")
+  install (FILES "${BUILD_PATCH}/adm/templates/draw.${SCRIPT_EXT}" DESTINATION  "${INSTALL_SCRIPT_DIR}"
+          PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
 else()
-  install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/draw.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR}" PERMISSIONS
-          OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
+  install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/draw.${SCRIPT_EXT}" DESTINATION  "${INSTALL_SCRIPT_DIR}"
+          PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
 endif()
+
+# copy draw script to CMake binary folder
 OCCT_COPY_FILE_OR_DIR ("adm/templates/draw.${SCRIPT_EXT}" "${CMAKE_BINARY_DIR}")
 
 set (SUB_CUSTOM_NAME "custom_${COMPILER}_${COMPILER_BITNESS}.${SCRIPT_EXT}")
@@ -405,29 +541,29 @@ set (SUB_CUSTOM_NAME "custom_${COMPILER}_${COMPILER_BITNESS}.${SCRIPT_EXT}")
 if (WIN32)
   set (ADDITIONAL_CUSTOM_CONTENT "\nif exist \"%~dp0${SUB_CUSTOM_NAME}\" (\n  call \"%~dp0${SUB_CUSTOM_NAME}\" %VCVER% %ARCH% %CASDEB% \n)")
 else()
-  set (ADDITIONAL_CUSTOM_CONTENT "\nif [ -e \"\${aScriptPath}/${SUB_CUSTOM_NAME}\" ]; then\n  source \"\${aScriptPath}/${SUB_CUSTOM_NAME}\" \"\${COMPILER}\" \"\${WOKSTATION}\${ARCH}\" \"\${CASDEB}\" \nfi")
+  set (ADDITIONAL_CUSTOM_CONTENT "\nif [ -e \"\${aScriptPath}/${SUB_CUSTOM_NAME}\" ]; then\n  source \"\${aScriptPath}/${SUB_CUSTOM_NAME}\" \"\$1\" \"\$2\" \nfi")
 endif()
 
  # change custom.bat/sh
-if (EXISTS "${INSTALL_DIR}/custom.${SCRIPT_EXT}")
-  file (READ "${INSTALL_DIR}/custom.${SCRIPT_EXT}" CUSTOM_CONTENT)
+if (EXISTS "${INSTALL_BIN_DIR}/custom.${SCRIPT_EXT}")
+  file (READ "${INSTALL_BIN_DIR}/custom.${SCRIPT_EXT}" CUSTOM_CONTENT)
 
   set (CUSTOM_CONTENT "${CUSTOM_CONTENT} ${ADDITIONAL_CUSTOM_CONTENT}")
 
-  file (WRITE "${INSTALL_DIR}/custom.${SCRIPT_EXT}" "${CUSTOM_CONTENT}")
+  file (WRITE "${INSTALL_BIN_DIR}/custom.${SCRIPT_EXT}" "${CUSTOM_CONTENT}")
 else()
-  OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_DIR}")
+  OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_SCRIPT_DIR}")
 endif()
 
 # write current custom.bat/sh (for install directory)
 set (SUB_CUSTOM_BUILD_NAME "custom_${COMPILER}_${COMPILER_BITNESS}.install.${SCRIPT_EXT}")
-OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${SUB_CUSTOM_BUILD_NAME}" "${SUB_CUSTOM_NAME}" "${INSTALL_DIR}")
+OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${SUB_CUSTOM_BUILD_NAME}" "${SUB_CUSTOM_NAME}" "${INSTALL_SCRIPT_DIR}")
 
 # write current custom.bat/sh (for build directory)
 OCCT_CONFIGURE ("adm/templates/custom.build.${SCRIPT_EXT}.in" "${SUB_CUSTOM_NAME}")
 
 if (BUILD_MODULE_OcctMfcSamples)
-  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.bat" "${INSTALL_DIR}")
+  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.bat" "${INSTALL_SCRIPT_DIR}")
   OCCT_COPY_FILE_OR_DIR    ("adm/templates/sample.bat" "${CMAKE_BINARY_DIR}")
 endif()
 
@@ -435,29 +571,31 @@ endif()
 OCCT_CONFIGURE ("adm/templates/env.build.${SCRIPT_EXT}.in" "env.${SCRIPT_EXT}")
 
 # end script for draw in standalone environment
-# release version
-set (BUILD_LETTER "")
-OCCT_CONFIGURE ("adm/templates/env.install.${SCRIPT_EXT}.in" "env.install.release.${SCRIPT_EXT}")
-install (FILES "${CMAKE_BINARY_DIR}/env.install.release.${SCRIPT_EXT}" 
-         CONFIGURATIONS Release
-         DESTINATION  "${INSTALL_DIR}"
-         RENAME "env.${SCRIPT_EXT}")
+if (UNIX)
+  OCCT_CONFIGURE ("adm/templates/env.install.sh.in" "env.install.sh")
+  install (FILES "${CMAKE_BINARY_DIR}/env.install.sh" DESTINATION  "${INSTALL_SCRIPT_DIR}" RENAME "env.sh")
+else()
+  # release version
+  set (CURRENT_BUILD_LETTER "")
+  OCCT_CONFIGURE ("adm/templates/env.install.bat.in" "env.install.release.bat")
+  install (FILES "${CMAKE_BINARY_DIR}/env.install.release.bat" 
+           CONFIGURATIONS Release
+           DESTINATION  "${INSTALL_SCRIPT_DIR}" RENAME "env.bat")
 
-# debug version
-set (BUILD_LETTER "d")
-OCCT_CONFIGURE ("adm/templates/env.install.${SCRIPT_EXT}.in" "env.install.debug.${SCRIPT_EXT}")
-install (FILES "${CMAKE_BINARY_DIR}/env.install.debug.${SCRIPT_EXT}" 
-         CONFIGURATIONS Debug
-         DESTINATION  "${INSTALL_DIR}"
-         RENAME "env.${SCRIPT_EXT}")
+  # debug version
+  set (CURRENT_BUILD_LETTER "d")
+  OCCT_CONFIGURE ("adm/templates/env.install.bat.in" "env.install.debug.bat")
+  install (FILES "${CMAKE_BINARY_DIR}/env.install.debug.bat" 
+           CONFIGURATIONS Debug
+           DESTINATION  "${INSTALL_SCRIPT_DIR}" RENAME "env.bat")
 
-# release with debug info version
-set (BUILD_LETTER "i")
-OCCT_CONFIGURE ("adm/templates/env.install.${SCRIPT_EXT}.in" "env.install.relwithdebinfo.${SCRIPT_EXT}")
-install (FILES "${CMAKE_BINARY_DIR}/env.install.relwithdebinfo.${SCRIPT_EXT}" 
-         CONFIGURATIONS RelWithDebInfo
-         DESTINATION  "${INSTALL_DIR}"
-         RENAME "env.${SCRIPT_EXT}")
+  # release with debug info version
+  set (CURRENT_BUILD_LETTER "i")
+  OCCT_CONFIGURE ("adm/templates/env.install.bat.in" "env.install.relwithdebinfo.bat")
+  install (FILES "${CMAKE_BINARY_DIR}/env.install.relwithdebinfo.bat" 
+           CONFIGURATIONS RelWithDebInfo
+           DESTINATION  "${INSTALL_SCRIPT_DIR}" RENAME "env.bat")
+endif()
 
 # copy DrawAppliInit from OCCT source to build directory
 if (NOT EXISTS "${CMAKE_BINARY_DIR}/DrawAppliInit")
@@ -470,12 +608,15 @@ foreach(RESOURCE ${RESOURCES})
   get_filename_component(RESOURCE_FOLDER ${RESOURCE} DIRECTORY)
   if(NOT "${RESOURCE_FOLDER}" STREQUAL "")
     get_filename_component(RESOURCE_FOLDER ${RESOURCE_FOLDER} NAME)
-    OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_DIR}/src/${RESOURCE_FOLDER}")
+    OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_OCCT_RESOURCE_DIR}/${RESOURCE_FOLDER}")
   else()
-    OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_DIR}/src")
+    OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_OCCT_RESOURCE_DIR}")
   endif()
 endforeach()
 
+# define CSF variable
+OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_csf")
+
 # include patched toolkit projects or original ones
 foreach (BUILD_TOOLKIT ${BUILD_TOOLKITS})
   OCCT_ADD_SUBDIRECTORY ("src/${BUILD_TOOLKIT}")

adm/MODULES

@@ -2,6 +2,6 @@ FoundationClasses TKernel TKMath
 ModelingData TKG2d TKG3d TKGeomBase TKBRep
 ModelingAlgorithms TKGeomAlgo TKTopAlgo TKPrim TKBO TKBool TKHLR TKFillet TKOffset TKFeat TKMesh TKXMesh TKShHealing
 Visualization TKService TKV3d TKOpenGl TKMeshVS TKIVtk TKD3DHost
-ApplicationFramework TKCDF TKLCAF TKCAF TKBinL TKXmlL TKBin TKXml FWOSPlugin TKTObj TKBinTObj TKXmlTObj
+ApplicationFramework TKCDF TKLCAF TKCAF TKBinL TKXmlL TKBin TKXml TKStdL TKStd FWOSPlugin TKTObj TKBinTObj TKXmlTObj TKVCAF
 DataExchange TKXSBase TKSTEPBase TKSTEPAttr TKSTEP209 TKSTEP TKIGES TKXCAF TKXDEIGES TKXDESTEP TKSTL TKVRML TKXmlXCAF TKBinXCAF
-Draw TKDraw TKTopTest TKViewerTest TKXSDRAW TKDCAF TKXDEDRAW TKTObjDRAW TKQADraw TKIVtkDraw DRAWEXE
+Draw TKDraw TKTopTest TKViewerTest TKXSDRAW TKDCAF TKXDEDRAW TKTObjDRAW TKQADraw TKIVtkDraw DRAWEXE

adm/UDLIST

@@ -67,6 +67,7 @@ n GeomLProp
 n GeomLib
 n GeomProjLib
 n GeomTools
+n GeomEvaluator
 n Hermit
 n IntAna
 n IntAna2d
@@ -236,13 +237,20 @@ n BinMDataXtd
 n BinMDocStd
 n BinMFunction
 n BinMNaming
-n BinMPrsStd
 n BinObjMgt
 n BinTools
 n CDF
 n CDM
 n FWOSDriver
 n PCDM
+n StdLDrivers
+n StdLObject
+n StdLPersistent
+n StdObjMgt
+n StdDrivers
+n StdObject
+n StdPersistent
+n ShapePersistent
 n TDF
 n TDataStd
 n TDataXtd
@@ -259,7 +267,6 @@ n XmlMDataXtd
 n XmlMDocStd
 n XmlMFunction
 n XmlMNaming
-n XmlMPrsStd
 n XmlObjMgt
 r StdResource
 r XmlOcafResource
@@ -272,6 +279,8 @@ t TKCAF
 t TKCDF
 t TKLCAF
 
+t TKStdL
+t TKStd
 t TKTObj
 t TKXml
 t TKXmlL
@@ -430,3 +439,5 @@ n IVtkTools
 t TKIVtk
 n IVtkDraw
 t TKIVtkDraw
+n Geom2dEvaluator
+t TKVCAF

adm/cmake/3rdparty_macro.cmake

@@ -1,113 +1,103 @@
-#
+##
+
+if(3RDPARTY_MACRO_ALREADY_INCLUDED)
+  return()
+endif()
+set(3RDPARTY_MACRO_ALREADY_INCLUDED 1)
 
-# include occt macros. compiler_bitness, os_wiht_bit, compiler
-OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
 
 macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_NAME LIBRARY_NAME_DEBUG)
 
-  # define 3RDPARTY_${PRODUCT_NAME}_DIR variable is it isn't defined
+  if (NOT DEFINED INSTALL_${PRODUCT_NAME})
+    set (INSTALL_${PRODUCT_NAME} OFF CACHE BOOL "${INSTALL_${PRODUCT_NAME}_DESCR}")
+  endif()
+
   if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_DIR)
     set (3RDPARTY_${PRODUCT_NAME}_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME}")
   endif()
 
-  # search for product directory inside 3RDPARTY_DIR directory
-  if (NOT 3RDPARTY_${PRODUCT_NAME}_DIR AND 3RDPARTY_DIR)
-    FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" "${PRODUCT_NAME}" ${PRODUCT_NAME}_DIR_NAME)
-    if (${PRODUCT_NAME}_DIR_NAME)
-      message (STATUS "Info: ${PRODUCT_NAME}: ${${PRODUCT_NAME}_DIR_NAME} folder is used")
-      set (3RDPARTY_${PRODUCT_NAME}_DIR "${3RDPARTY_DIR}/${${PRODUCT_NAME}_DIR_NAME}" CACHE PATH "The directory containing ${PRODUCT_NAME}" FORCE)
+  # include occt macros. compiler_bitness, os_wiht_bit, compiler
+  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
+
+  # specify product folder in connectin with 3RDPARTY_DIR
+  if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
+    #CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_DIR 3RDPARTY_${PRODUCT_NAME}_DIR PATH "The directory containing ${PRODUCT_NAME}")
+
+    if (NOT 3RDPARTY_${PRODUCT_NAME}_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
+      FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" ${PRODUCT_NAME} ${PRODUCT_NAME}_DIR_NAME)
+      if (${PRODUCT_NAME}_DIR_NAME)
+        set (3RDPARTY_${PRODUCT_NAME}_DIR "${3RDPARTY_DIR}/${${PRODUCT_NAME}_DIR_NAME}" CACHE PATH "The directory containing ${PRODUCT_NAME}" FORCE)
+      endif()
     endif()
+  else()
+    #set (3RDPARTY_${PRODUCT_NAME}_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME}" FORCE)
   endif()
 
-  if (NOT DEFINED INSTALL_${PRODUCT_NAME})
-    message (STATUS "${INSTALL_${PRODUCT_NAME}_DESCR}")
-    if (NOT "${INSTALL_${PRODUCT_NAME}_DESCR}" STREQUAL "")
-      set (INSTALL_${PRODUCT_NAME} OFF CACHE BOOL "${INSTALL_${PRODUCT_NAME}_DESCR}")
-    else()
-      set (INSTALL_${PRODUCT_NAME} OFF CACHE BOOL "Is ${PRODUCT_NAME} required to be copied into install directory")
-    endif()
+  if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR)
+    set (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR           "" CACHE PATH "the path of ${HEADER_NAME}")
   endif()
 
-  # search for include directory
-  if (NOT 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR}")
-    set (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR "3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR-NOTFOUND" CACHE FILEPATH "The directory containing the headers of the ${PRODUCT_NAME}" FORCE)
-    find_path (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR ${HEADER_NAME} PATHS
-                                                                    "${3RDPARTY_${PRODUCT_NAME}_DIR}/include"
-                                                                    ${3RDPARTY_${PRODUCT_NAME}_ADDITIONAL_PATH_FOR_HEADER}
-                                                                   NO_DEFAULT_PATH)
-    find_path (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR ${HEADER_NAME})
-  endif()
-
-  if (NOT 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR}")
-    set (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR "" CACHE FILEPATH "The directory containing the headers of the ${PRODUCT_NAME}" FORCE)
-  endif()
-
-  if (NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR)
-    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "" CACHE FILEPATH "${PRODUCT_NAME} library" FORCE)
-  elseif (3RDPARTY_${PRODUCT_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
-    get_filename_component(3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_TMP "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}" PATH)
-    if (NOT "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" STREQUAL "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_TMP}")
-      set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "" CACHE FILEPATH "${PRODUCT_NAME} library" FORCE)
-    endif()
-  endif()
-
-  # search for library
-  if (NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
-    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "3RDPARTY_${PRODUCT_NAME}_LIBRARY-NOTFOUND" CACHE FILEPATH "${PRODUCT_NAME} library" FORCE)
-
-    find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY ${LIBRARY_NAME} PATHS
-                                                                   "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}"
-                                                                   "${3RDPARTY_${PRODUCT_NAME}_DIR}/lib"
-                                                                   ${3RDPARTY_${PRODUCT_NAME}_ADDITIONAL_PATH_FOR_LIB}
-                                                                   NO_DEFAULT_PATH)
-    # second search if previous one do not find anything
-    find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY ${LIBRARY_NAME})
+  if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_LIBRARY OR NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}")
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY               "" CACHE FILEPATH "${PRODUCT_NAME} library" FORCE)
   endif()
 
   if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR)
-    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "" CACHE FILEPATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR           "" CACHE PATH "The directory containing ${PRODUCT_NAME} library")
   endif()
 
-  # library path
-  if (3RDPARTY_${PRODUCT_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
-    get_filename_component (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}" PATH)
-    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" CACHE FILEPATH "The directory containing ${PRODUCT_NAME} library" FORCE)
-  endif()
-
-  # search for shared library (just for win case)
   if (WIN32)
-    set (CMAKE_FIND_LIBRARY_SUFFIXES ".lib" ".dll")
+    if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_DLL OR NOT 3RDPARTY_${PRODUCT_NAME}_DLL_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}")
+      set (3RDPARTY_${PRODUCT_NAME}_DLL                 "" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
+    endif()
+  endif()
 
-    if (NOT 3RDPARTY_${PRODUCT_NAME}_DLL_DIR)
-      set (3RDPARTY_${PRODUCT_NAME}_DLL "" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
-    elseif (3RDPARTY_${PRODUCT_NAME}_DLL AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
-      get_filename_component(3RDPARTY_${PRODUCT_NAME}_DLL_DIR_TMP "${3RDPARTY_${PRODUCT_NAME}_DLL}" PATH)
-      if (NOT "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}" STREQUAL "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_TMP}")
-        set (3RDPARTY_${PRODUCT_NAME}_DLL "" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
+  if (WIN32)
+    if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR)
+      set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR             "" CACHE PATH "The directory containing ${PRODUCT_NAME} shared library")
+    endif()
+  endif()
+
+  # check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_${PRODUCT_NAME}_DIR
+  if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_${PRODUCT_NAME}_DIR 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR PATH "the path to ${PRODUCT_NAME}")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_${PRODUCT_NAME}_DIR 3RDPARTY_${PRODUCT_NAME}_LIBRARY FILEPATH "the path to ${PRODUCT_NAME} library")
+
+    if (3RDPARTY_${PRODUCT_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
+      get_filename_component (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}" PATH)
+      set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+    else()
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_${PRODUCT_NAME}_DIR 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR PATH "The directory containing ${PRODUCT_NAME} library")
+    endif()
+
+    if (WIN32)
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_${PRODUCT_NAME}_DIR 3RDPARTY_${PRODUCT_NAME}_DLL FILEPATH "the path to ${PRODUCT_NAME} shared library")
+
+      if (3RDPARTY_${PRODUCT_NAME}_DLL AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
+        get_filename_component (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL}" PATH)
+        set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} shared library" FORCE)
+      else()
+      
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_${PRODUCT_NAME}_DIR 3RDPARTY_${PRODUCT_NAME}_DLL_DIR PATH "The directory containing ${PRODUCT_NAME} shared library")
       endif()
     endif()
+  endif()
 
-    if (NOT 3RDPARTY_${PRODUCT_NAME}_DLL OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
-      set (3RDPARTY_${PRODUCT_NAME}_DLL "3RDPARTY_${PRODUCT_NAME}_DLL-NOTFOUND" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
+  # header
+  if (NOT 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR}")
 
-      find_library (3RDPARTY_${PRODUCT_NAME}_DLL "${LIBRARY_NAME}" PATHS
-                                                                   "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}"
-                                                                   "${3RDPARTY_${PRODUCT_NAME}_DIR}/bin"
-                                                                   ${3RDPARTY_${PRODUCT_NAME}_ADDITIONAL_PATH_FOR_DLL}
-                                                                   NO_DEFAULT_PATH)
+    # set 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR
+    set (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR "3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR-NOTFOUND" CACHE FILEPATH "the path to ${HEADER_NAME}" FORCE)
 
-        # second search if previous one do not find anything
-        find_library (3RDPARTY_${PRODUCT_NAME}_DLL "${LIBRARY_NAME}")
-    endif()
-
-    if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR)
-      set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "" CACHE FILEPATH "The directory containing ${PRODUCT_NAME} shared library" FORCE)
-    endif()
-
-    # shared library path
-    if (3RDPARTY_${PRODUCT_NAME}_DLL AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
-      get_filename_component (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL}" PATH)
-      set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}" CACHE FILEPATH "The directory containing ${PRODUCT_NAME} shared library" FORCE)
+    if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
+      find_path (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR NAMES ${HEADER_NAME}
+                                                      PATHS ${3RDPARTY_${PRODUCT_NAME}_DIR}
+                                                      PATH_SUFFIXES include
+                                                      CMAKE_FIND_ROOT_PATH_BOTH
+                                                      NO_DEFAULT_PATH)
+    else()
+      find_path (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR NAMES ${HEADER_NAME}
+                                                      PATH_SUFFIXES include
+                                                      CMAKE_FIND_ROOT_PATH_BOTH)
     endif()
   endif()
 
@@ -115,16 +105,79 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_NAME LIBRARY_NAME_DEB
     list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR}")
   else()
     list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR)
+
+    set (3RDPARTY_${PRODUCT_NAME}_INCLUDE_DIR "" CACHE FILEPATH "The path to ${HEADER_NAME}" FORCE)
   endif()
 
-  if (3RDPARTY_${PRODUCT_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
+  # library
+  if (NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib)
+
+    set (${PRODUCT_NAME}_PATH_SUFFIXES lib)
+    if (ANDROID)
+      set (${PRODUCT_NAME}_PATH_SUFFIXES ${${PRODUCT_NAME}_PATH_SUFFIXES} libs/${ANDROID_ABI})
+    endif()
+
+    # set 3RDPARTY_${PRODUCT_NAME}_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_LIBRARY
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "3RDPARTY_${PRODUCT_NAME}_LIBRARY-NOTFOUND" CACHE FILEPATH "The path to ${PRODUCT_NAME} library" FORCE)
+
+    if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
+      find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY NAMES ${LIBRARY_NAME}
+                                                     PATHS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" "${3RDPARTY_${PRODUCT_NAME}_DIR}"
+                                                     PATH_SUFFIXES ${${PRODUCT_NAME}_PATH_SUFFIXES}
+                                                     CMAKE_FIND_ROOT_PATH_BOTH
+                                                     NO_DEFAULT_PATH)
+    else()
+      find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY NAMES ${LIBRARY_NAME} 
+                                                     PATH_SUFFIXES ${${PRODUCT_NAME}_PATH_SUFFIXES}
+                                                     CMAKE_FIND_ROOT_PATH_BOTH)
+    endif()
+
+    if (3RDPARTY_${PRODUCT_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
+      get_filename_component (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}" PATH)
+      set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+    else()
+      set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+    endif()
+  endif()
+
+  if (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}")
   else()
     list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR)
+
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "" CACHE FILEPATH "The path to ${PRODUCT_NAME} library" FORCE)
   endif()
 
+  # shared library
   if (WIN32)
-    if (3RDPARTY_${PRODUCT_NAME}_DLL OR EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
+    if (NOT 3RDPARTY_${PRODUCT_NAME}_DLL OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
+      
+      set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
+
+      # set 3RDPARTY_${PRODUCT_NAME}_DLL as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_DLL
+      set (3RDPARTY_${PRODUCT_NAME}_DLL "3RDPARTY_${PRODUCT_NAME}_DLL-NOTFOUND" CACHE FILEPATH "The path to ${PRODUCT_NAME} shared library" FORCE)
+
+      if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
+        find_library (3RDPARTY_${PRODUCT_NAME}_DLL  NAMES ${LIBRARY_NAME}
+                                                    PATHS "${3RDPARTY_${PRODUCT_NAME}_DIR}"
+                                                    PATH_SUFFIXES bin
+                                                    NO_DEFAULT_PATH)
+      else()
+        find_library (3RDPARTY_${PRODUCT_NAME}_DLL NAMES ${LIBRARY_NAME} PATH_SUFFIXES bin)
+      endif()
+
+      if (3RDPARTY_${PRODUCT_NAME}_DLL AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
+        get_filename_component (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL}" PATH)
+        set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+      else()
+        set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME} shared library" FORCE)
+
+        set (3RDPARTY_${PRODUCT_NAME}_DLL "" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
+      endif()
+    endif()
+
+    if (3RDPARTY_${PRODUCT_NAME}_DLL_DIR OR EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}")
     else()
       list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR)
@@ -138,47 +191,62 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_NAME LIBRARY_NAME_DEB
     OCCT_MAKE_COMPILER_SHORT_NAME()
 
     if (WIN32)
-      install (FILES "${3RDPARTY_${PRODUCT_NAME}_DLL}" 
-               CONFIGURATIONS Release
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-      install (FILES "${3RDPARTY_${PRODUCT_NAME}_DLL}" 
-               CONFIGURATIONS RelWithDebInfo
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-      install (FILES "${3RDPARTY_${PRODUCT_NAME}_DLL}" 
-               CONFIGURATIONS Debug
-               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
-
+      if (DEFINED INSTALL_BIN_DIR)
+        install (FILES "${3RDPARTY_${PRODUCT_NAME}_DLL}" DESTINATION "${INSTALL_BIN_DIR}")
+      else()
+        install (FILES "${3RDPARTY_${PRODUCT_NAME}_DLL}" 
+                 CONFIGURATIONS Release
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
+        install (FILES "${3RDPARTY_${PRODUCT_NAME}_DLL}" 
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
+        install (FILES "${3RDPARTY_${PRODUCT_NAME}_DLL}" 
+                 CONFIGURATIONS Debug
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+      endif()
     else()
       get_filename_component(ABS_PATH ${3RDPARTY_${PRODUCT_NAME}_LIBRARY} REALPATH)
+
       if ("${PRODUCT_NAME}" STREQUAL "FREEIMAGE")
         get_filename_component(FREEIMLIB ${3RDPARTY_${PRODUCT_NAME}_LIBRARY} NAME)
-        install (FILES "${ABS_PATH}"
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-                 RENAME ${FREEIMLIB}.3)
-                 install (FILES "${ABS_PATH}"
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-                 RENAME ${FREEIMLIB}.3)
-        install (FILES "${ABS_PATH}"
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-                 RENAME ${FREEIMLIB}.3)
+
+        if (DEFINED INSTALL_LIB_DIR)
+          install (FILES "${ABS_PATH}" DESTINATION "${INSTALL_LIB_DIR}" RENAME ${FREEIMLIB}.3)
+        else()
+          install (FILES "${ABS_PATH}"
+                   CONFIGURATIONS Release
+                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
+                   RENAME ${FREEIMLIB}.3)
+          install (FILES "${ABS_PATH}"
+                   CONFIGURATIONS RelWithDebInfo
+                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
+                   RENAME ${FREEIMLIB}.3)
+          install (FILES "${ABS_PATH}"
+                   CONFIGURATIONS Debug
+                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
+                   RENAME ${FREEIMLIB}.3)
+        endif()
       endif()
+
       if("${PRODUCT_NAME}" STREQUAL "GL2PS")
         get_filename_component(GL2PSLIB ${3RDPARTY_${PRODUCT_NAME}_LIBRARY} NAME)
-        install (FILES "${ABS_PATH}"
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-                 RENAME ${GL2PSLIB}.1)
-        install (FILES "${ABS_PATH}"
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-                 RENAME ${GL2PSLIB}.1)
-        install (FILES "${ABS_PATH}"
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-                 RENAME ${GL2PSLIB}.1)
+
+        if (DEFINED INSTALL_LIB_DIR)
+          install (FILES "${ABS_PATH}" DESTINATION "${INSTALL_LIB_DIR}" RENAME ${GL2PSLIB}.1)
+        else()
+          install (FILES "${ABS_PATH}"
+                   CONFIGURATIONS Release
+                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
+                   RENAME ${GL2PSLIB}.1)
+          install (FILES "${ABS_PATH}"
+                   CONFIGURATIONS RelWithDebInfo
+                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
+                   RENAME ${GL2PSLIB}.1)
+          install (FILES "${ABS_PATH}"
+                   CONFIGURATIONS Debug
+                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
+                   RENAME ${GL2PSLIB}.1)
+        endif()
       endif()
     endif()
   else()

adm/cmake/bison.cmake

@@ -9,7 +9,7 @@ endif()
 # BISON_EXECUTABLE is required by BISON_TARGET macro and should be defined
 set (BISON_EXECUTABLE "${3RDPARTY_BISON_EXECUTABLE}" CACHE FILEPATH "path to the bison executable" FORCE)
 
-find_package (Bison)
+find_package (BISON)
 
 if (BISON_FOUND)
   set (3RDPARTY_BISON_EXECUTABLE "${BISON_EXECUTABLE}" CACHE FILEPATH "The Path to the bison command" FORCE)

adm/cmake/doxygen.cmake

@@ -1,32 +1,35 @@
 # doxygen
 
+set (3RDPARTY_DOT_EXECUTABLE_DESCR       "The path to the 'dot' tool producing layered drawings of directed graphs.\nThis tool used by doxygen")
+set (3RDPARTY_DOXYGEN_EXECUTABLE_DESCR   "The path to the doxygen command")
+
 if (NOT DEFINED 3RDPARTY_DOXYGEN_EXECUTABLE)
-  set (3RDPARTY_DOXYGEN_EXECUTABLE "" CACHE FILEPATH "The Path to the doxygen command")
+  set (3RDPARTY_DOXYGEN_EXECUTABLE "" CACHE FILEPATH "${3RDPARTY_DOXYGEN_EXECUTABLE_DESCR}")
 endif()
 
-if (NOT DEFINED 3RDPARTY_DOXYGEN_DOT_EXECUTABLE)
-  set (3RDPARTY_DOXYGEN_DOT_EXECUTABLE "" CACHE FILEPATH "The path to the dot program used by doxygen")
+if (NOT DEFINED 3RDPARTY_DOT_EXECUTABLE)
+  set (3RDPARTY_DOT_EXECUTABLE "" CACHE FILEPATH "${3RDPARTY_DOT_EXECUTABLE_DESCR}")
 endif()
 
-if (NOT DEFINED 3RDPARTY_DOXYGEN_SKIP_DOT_EXECUTABLE)
-  set (3RDPARTY_DOXYGEN_SKIP_DOT_EXECUTABLE OFF CACHE BOOL "Skip trying to find Dot")
+if (NOT DEFINED 3RDPARTY_SKIP_DOT_EXECUTABLE)
+  set (3RDPARTY_SKIP_DOT_EXECUTABLE OFF CACHE BOOL "Skip trying to find Dot")
 endif()
 
-if (3RDPARTY_DOXYGEN_SKIP_DOT_EXECUTABLE)
-  OCCT_CHECK_AND_UNSET (3RDPARTY_DOXYGEN_DOT_EXECUTABLE)
+if (3RDPARTY_SKIP_DOT_EXECUTABLE)
+  OCCT_CHECK_AND_UNSET (3RDPARTY_DOT_EXECUTABLE)
 endif()
 
-if (NOT 3RDPARTY_DOXYGEN_EXECUTABLE OR (NOT 3RDPARTY_DOXYGEN_SKIP_DOT_EXECUTABLE AND NOT 3RDPARTY_DOXYGEN_DOT_EXECUTABLE))
+if (NOT 3RDPARTY_DOXYGEN_EXECUTABLE OR (NOT 3RDPARTY_SKIP_DOT_EXECUTABLE AND NOT 3RDPARTY_DOT_EXECUTABLE))
 
-  set (DOXYGEN_SKIP_DOT ${3RDPARTY_DOXYGEN_SKIP_DOT_EXECUTABLE})
+  set (DOXYGEN_SKIP_DOT ${3RDPARTY_SKIP_DOT_EXECUTABLE})
   find_package (Doxygen)
   
   if (NOT 3RDPARTY_DOXYGEN_EXECUTABLE AND DOXYGEN_EXECUTABLE)
-    set (3RDPARTY_DOXYGEN_EXECUTABLE "${DOXYGEN_EXECUTABLE}" CACHE FILEPATH "The Path to the doxygen command" FORCE)
+    set (3RDPARTY_DOXYGEN_EXECUTABLE "${DOXYGEN_EXECUTABLE}" CACHE FILEPATH "${3RDPARTY_DOXYGEN_EXECUTABLE_DESCR}" FORCE)
   endif()
   
-  if (NOT 3RDPARTY_DOXYGEN_SKIP_DOT_EXECUTABLE AND NOT 3RDPARTY_DOXYGEN_DOT_EXECUTABLE AND DOXYGEN_DOT_EXECUTABLE)
-    set (3RDPARTY_DOXYGEN_DOT_EXECUTABLE "${DOXYGEN_DOT_EXECUTABLE}" CACHE FILEPATH "The path to the dot program used by doxygen" FORCE)
+  if (NOT 3RDPARTY_SKIP_DOT_EXECUTABLE AND NOT 3RDPARTY_DOT_EXECUTABLE AND DOXYGEN_DOT_EXECUTABLE)
+    set (3RDPARTY_DOT_EXECUTABLE "${DOXYGEN_DOT_EXECUTABLE}" CACHE FILEPATH "${3RDPARTY_DOT_EXECUTABLE_DESCR}" FORCE)
   endif()
 endif()
 
@@ -34,9 +37,9 @@ if (NOT 3RDPARTY_DOXYGEN_EXECUTABLE OR NOT EXISTS "${3RDPARTY_DOXYGEN_EXECUTABLE
   list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_DOXYGEN_EXECUTABLE)
 endif()
 
-if (NOT 3RDPARTY_DOXYGEN_SKIP_DOT_EXECUTABLE)
-  if (NOT 3RDPARTY_DOXYGEN_DOT_EXECUTABLE OR NOT EXISTS "${3RDPARTY_DOXYGEN_DOT_EXECUTABLE}")
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_DOXYGEN_DOT_EXECUTABLE)
+if (NOT 3RDPARTY_SKIP_DOT_EXECUTABLE)
+  if (NOT 3RDPARTY_DOT_EXECUTABLE OR NOT EXISTS "${3RDPARTY_DOT_EXECUTABLE}")
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_DOT_EXECUTABLE)
   endif()
 endif()
 

adm/cmake/freetype.cmake

@@ -8,29 +8,27 @@ if (NOT DEFINED 3RDPARTY_FREETYPE_DIR)
   set (3RDPARTY_FREETYPE_DIR "" CACHE PATH "The directory containing freetype")
 endif()
 
-# store ENV{FREETYPE_DIR}
-SET (CACHED_FREETYPE_DIR $ENV{FREETYPE_DIR})
-
 # include occt macros. compiler_bitness, os_wiht_bit, compiler
 OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
 
 OCCT_MAKE_COMPILER_SHORT_NAME()
 OCCT_MAKE_COMPILER_BITNESS()
 
-if (NOT ENV{FREETYPE_DIR})
-  # search for freetype in user defined directory
-  if (NOT 3RDPARTY_FREETYPE_DIR AND 3RDPARTY_DIR)
-    FIND_PRODUCT_DIR("${3RDPARTY_DIR}" FREETYPE FREETYPE_DIR_NAME)
+# specify freetype folder in connectin with 3RDPARTY_DIR
+if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
+  #CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_DIR 3RDPARTY_FREETYPE_DIR PATH "The directory containing freetype")
+
+  if (NOT 3RDPARTY_FREETYPE_DIR OR NOT EXISTS "${3RDPARTY_FREETYPE_DIR}")
+    FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" FREETYPE FREETYPE_DIR_NAME)
     if (FREETYPE_DIR_NAME)
       set (3RDPARTY_FREETYPE_DIR "${3RDPARTY_DIR}/${FREETYPE_DIR_NAME}" CACHE PATH "The directory containing freetype" FORCE)
     endif()
   endif()
-
-  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
-    set (ENV{FREETYPE_DIR} "${3RDPARTY_FREETYPE_DIR}")
-  endif()
+else()
+  #set (3RDPARTY_FREETYPE_DIR "" CACHE PATH "The directory containing freetype" FORCE)
 endif()
 
+# define required freetype variables
 if (NOT DEFINED 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build)
   set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build  "" CACHE FILEPATH "the path of ft2build.h")
 endif()
@@ -39,202 +37,296 @@ if (NOT DEFINED 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2)
   set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "" CACHE FILEPATH "the path of freetype2")
 endif()
 
-if (NOT DEFINED 3RDPARTY_FREETYPE_LIBRARY OR NOT 3RDPARTY_FREETYPE_LIBRARY_DIR)
-  set (3RDPARTY_FREETYPE_LIBRARY               "" CACHE FILEPATH "freetype library")
+if (NOT DEFINED 3RDPARTY_FREETYPE_LIBRARY OR NOT 3RDPARTY_FREETYPE_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
+  set (3RDPARTY_FREETYPE_LIBRARY               "" CACHE FILEPATH "freetype library" FORCE)
 endif()
 
 if (NOT DEFINED 3RDPARTY_FREETYPE_LIBRARY_DIR)
-  set (3RDPARTY_FREETYPE_LIBRARY_DIR           "" CACHE FILEPATH "The directory containing freetype library")
+  set (3RDPARTY_FREETYPE_LIBRARY_DIR           "" CACHE PATH "The directory containing freetype library")
 endif()
 
 if (WIN32)
-  if (NOT DEFINED 3RDPARTY_FREETYPE_DLL OR NOT 3RDPARTY_FREETYPE_DLL_DIR)
-    set (3RDPARTY_FREETYPE_DLL                   "" CACHE FILEPATH "freetype shared library")
+  if (NOT DEFINED 3RDPARTY_FREETYPE_DLL OR NOT 3RDPARTY_FREETYPE_DLL_DIR OR NOT EXISTS "${3RDPARTY_FREETYPE_DLL_DIR}")
+    set (3RDPARTY_FREETYPE_DLL                 "" CACHE FILEPATH "freetype shared library" FORCE)
   endif()
 endif()
 
 if (WIN32)
   if (NOT DEFINED 3RDPARTY_FREETYPE_DLL_DIR)
-    set (3RDPARTY_FREETYPE_DLL_DIR               "" CACHE FILEPATH "The directory containing freetype shared library")
+    set (3RDPARTY_FREETYPE_DLL_DIR               "" CACHE PATH "The directory containing freetype shared library")
   endif()
 endif()
 
-find_package(Freetype)
+# check 3RDPARTY_FREETYPE_ paths for consistency with specified 3RDPARTY_FREETYPE_DIR
+if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build FILEPATH "the path to ft2build.h")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 FILEPATH "the path to ftheader.h")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_LIBRARY FILEPATH "the path to freetype library")
 
-# ft2build header
-if (FREETYPE_INCLUDE_DIR_ft2build AND EXISTS "${FREETYPE_INCLUDE_DIR_ft2build}")
-  if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build)
-    set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build  "${FREETYPE_INCLUDE_DIR_ft2build}" CACHE FILEPATH "the path of ft2build.h" FORCE)
+  if (3RDPARTY_FREETYPE_LIBRARY AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
+    get_filename_component (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY}" PATH)
+    set (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY_DIR}" CACHE PATH "The directory containing freetype library" FORCE)
+  else()
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_LIBRARY_DIR PATH "The directory containing freetype library")
+  endif()
+
+  if (WIN32)
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_DLL FILEPATH "the path to freetype shared library")
+
+    if (3RDPARTY_FREETYPE_DLL AND EXISTS "${3RDPARTY_FREETYPE_DLL}")
+      get_filename_component (3RDPARTY_FREETYPE_DLL_DIR "${3RDPARTY_FREETYPE_DLL}" PATH)
+      set (3RDPARTY_FREETYPE_DLL_DIR "${3RDPARTY_FREETYPE_DLL_DIR}" CACHE PATH "The directory containing freetype shared library" FORCE)
+    else()
+    
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_DLL_DIR PATH "The directory containing freetype shared library")
+    endif()
   endif()
 endif()
 
-if (NOT FREETYPE_INCLUDE_DIR_freetype2 OR NOT EXISTS "${FREETYPE_INCLUDE_DIR_freetype2}")
-  # cmake (version is < 3.0) doesn't find ftheader.h of freetype (version is >= 2.5.1)
-  # do search taking into account freetype structure of 2.5.1 version
-  find_path (FREETYPE_INCLUDE_DIR_freetype2 NAMES
-                                             freetype/config/ftheader.h
-                                             config/ftheader.h
-                                           HINTS
-                                             ENV FREETYPE_DIR
-                                           PATHS
-                                             /usr/X11R6
-                                             /usr/local/X11R6
-                                             /usr/local/X11
-                                             /usr/freeware
-                                           PATH_SUFFIXES include/freetype2 include freetype2
-                                           NO_DEFAULT_PATH)
-  find_path (FREETYPE_INCLUDE_DIR_freetype2 NAMES freetype/config/ftheader.h config/ftheader.h)
-elseif (FREETYPE_INCLUDE_DIR_freetype2 OR EXISTS "${FREETYPE_INCLUDE_DIR_freetype2}")
+# the FIRST step in search for freetype library and header folders (built-in search engine)
+
+# execute built-in search engine to seek freetype
+set (IS_BUILTIN_SEARCH_REQUIRED OFF)
+if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build}")
+  set (IS_BUILTIN_SEARCH_REQUIRED ON)
+elseif (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2}")
+  set (IS_BUILTIN_SEARCH_REQUIRED ON)
+elseif (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
+  set (IS_BUILTIN_SEARCH_REQUIRED ON)
+#elseif (WIN32)
+  #if (NOT 3RDPARTY_FREETYPE_DLL OR NOT EXISTS "${3RDPARTY_FREETYPE_DLL}")
+  #  set (IS_BUILTIN_SEARCH_REQUIRED ON)
+  #endif()
+endif()
+
+if (IS_BUILTIN_SEARCH_REQUIRED)
+
+  # use 3RDPARTY_FREETYPE_DIR if it is specified for freetype search
   if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
-    get_filename_component (3RDPARTY_FREETYPE_DIR_ABS "${3RDPARTY_FREETYPE_DIR}" ABSOLUTE)
-    get_filename_component (FREETYPE_INCLUDE_DIR_freetype2_ABS "${FREETYPE_INCLUDE_DIR_freetype2}" ABSOLUTE)
+    set (CACHED_FREETYPE_DIR $ENV{FREETYPE_DIR})
+    set (ENV{FREETYPE_DIR} "${3RDPARTY_FREETYPE_DIR}")
+  endif()
 
-    string (REGEX MATCH "${3RDPARTY_FREETYPE_DIR_ABS}" DOES_PATH_CONTAIN "${FREETYPE_INCLUDE_DIR_freetype2_ABS}")
+  find_package(Freetype)
 
-    if (NOT DOES_PATH_CONTAIN) # if cmake found freetype2 at different place from 3RDPARTY_FREETYPE_DIR
-      # search for freetype2 in 3RDPARTY_FREETYPE_DIR and if it will be found - replace freetyp2 path by new one
-      set (TMP_FREETYPE2 "TMP_FREETYPE2-NOTFOUND" CACHE FILEPATH "" FORCE)
-      find_path (TMP_FREETYPE2 NAMES freetype/config/ftheader.h config/ftheader.h
-                               PATHS "${3RDPARTY_FREETYPE_DIR}"
-                               PATH_SUFFIXES include/freetype2 include freetype2
-                               NO_DEFAULT_PATH)
+  # restore ENV{FREETYPE_DIR}
+  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
+    set (ENV{FREETYPE_DIR} ${CACHED_FREETYPE_DIR})
+  endif()
 
-      if (TMP_FREETYPE2 OR NOT EXISTS "${TMP_FREETYPE2}")
-        set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "${TMP_FREETYPE2}" CACHE FILEPATH "the path of freetype2" FORCE)
+  # check the found paths for consistency with specified 3RDPARTY_FREETYPE_DIR
+  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_ft2build FILEPATH "the path to ft2build.h")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_freetype2 FILEPATH "the path to ftheader.h")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_LIBRARY FILEPATH "freetype library")
+  endif()
 
-        # hide and remove TMP_FREETYPE2
-        mark_as_advanced (TMP_FREETYPE2)
-        unset (TMP_FREETYPE2)
-      endif()
+  # assign the found paths to corresponding 3RDPARTY_FREETYPE_ variables
+  if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build}")
+    if (FREETYPE_INCLUDE_DIR_ft2build AND EXISTS "${FREETYPE_INCLUDE_DIR_ft2build}")
+      set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build  "${FREETYPE_INCLUDE_DIR_ft2build}" CACHE FILEPATH "the path to ft2build.h" FORCE)
     endif()
   endif()
-endif()
 
-# return ENV{FREETYPE_DIR}
-SET (ENV{FREETYPE_DIR} ${CACHED_FREETYPE_DIR})
-
-# freetype2 header
-if (FREETYPE_INCLUDE_DIR_freetype2 AND EXISTS "${FREETYPE_INCLUDE_DIR_freetype2}")
-  if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2)
-    set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "${FREETYPE_INCLUDE_DIR_freetype2}" CACHE FILEPATH "the path of freetype2" FORCE)
-  endif()
-endif()
-
-if (NOT 3RDPARTY_FREETYPE_LIBRARY_DIR)
-  set (3RDPARTY_FREETYPE_LIBRARY "" CACHE FILEPATH "freetype library" FORCE)
-elseif (3RDPARTY_FREETYPE_LIBRARY AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
-  get_filename_component(3RDPARTY_FREETYPE_LIBRARY_DIR_TMP "${3RDPARTY_FREETYPE_LIBRARY}" PATH)
-  if (NOT "${3RDPARTY_FREETYPE_LIBRARY_DIR}" STREQUAL "${3RDPARTY_FREETYPE_LIBRARY_DIR_TMP}")
-    set (3RDPARTY_FREETYPE_LIBRARY "" CACHE FILEPATH "freetype library" FORCE)
-  endif()
-endif()
-
-if (WIN32)
-  if (NOT 3RDPARTY_FREETYPE_DLL_DIR)
-    set (3RDPARTY_FREETYPE_DLL "" CACHE FILEPATH "freetype shared library" FORCE)
-  elseif (3RDPARTY_FREETYPE_DLL AND EXISTS "${3RDPARTY_FREETYPE_DLL}")
-    get_filename_component(3RDPARTY_FREETYPE_DLL_DIR_TMP "${3RDPARTY_FREETYPE_DLL}" PATH)
-    if (NOT "${3RDPARTY_FREETYPE_DLL_DIR}" STREQUAL "${3RDPARTY_FREETYPE_DLL_DIR_TMP}")
-      set (3RDPARTY_FREETYPE_DLL "" CACHE FILEPATH "freetype shared library" FORCE)
+  if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2}")
+    if (FREETYPE_INCLUDE_DIR_freetype2 AND EXISTS "${FREETYPE_INCLUDE_DIR_freetype2}")
+      set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2  "${FREETYPE_INCLUDE_DIR_freetype2}" CACHE FILEPATH "the path to ftheader.h" FORCE)
     endif()
   endif()
-endif()
 
-# freetype library
-if (FREETYPE_LIBRARY AND EXISTS "${FREETYPE_LIBRARY}")
-  if (NOT 3RDPARTY_FREETYPE_LIBRARY)
-    set (3RDPARTY_FREETYPE_LIBRARY "${FREETYPE_LIBRARY}" CACHE FILEPATH "freetype library" FORCE)
+  if (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
+    if (FREETYPE_LIBRARY AND EXISTS "${FREETYPE_LIBRARY}")
+      set (3RDPARTY_FREETYPE_LIBRARY  "${FREETYPE_LIBRARY}" CACHE FILEPATH "The path to freetype library" FORCE)
+    endif()
   endif()
 
   if (3RDPARTY_FREETYPE_LIBRARY AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
     get_filename_component (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY}" PATH)
-    set (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY_DIR}" CACHE FILEPATH "The directory containing freetype library" FORCE)
+    set (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY_DIR}" CACHE PATH "The directory containing freetype library" FORCE)
+  else()
+    set (3RDPARTY_FREETYPE_LIBRARY_DIR "" CACHE PATH "The directory containing freetype library" FORCE)
+  endif()
+endif()
+
+# the SECOND step in search for freetype library and header folders (additional search algorithms)
+
+# ft2build.h
+if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build}")
+  set (FT2BUILD_NAMES ft2build.h config/ft2build.h freetype/config/ft2build.h)
+
+  # set 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build "3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build-NOTFOUND" CACHE FILEPATH "the path to ft2build.h" FORCE)
+
+  # cmake (version < 3.0) doesn't find ft2build.h of freetype (version is >= 2.5.1)
+  # do search taking into account freetype structure of 2.5.1 version
+  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
+    find_path (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build NAMES ${FT2BUILD_NAMES}
+                                                      PATHS ${3RDPARTY_FREETYPE_DIR}
+                                                      PATH_SUFFIXES include freetype2 include/freetype2
+                                                      CMAKE_FIND_ROOT_PATH_BOTH
+                                                      NO_DEFAULT_PATH)
+  else()
+    find_path (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build NAMES ${FT2BUILD_NAMES}
+                                                      PATHS /usr/X11R6 /usr/local/X11R6 /usr/local/X11 /usr/freeware
+                                                      PATH_SUFFIXES include/freetype2 include freetype2
+                                                      CMAKE_FIND_ROOT_PATH_BOTH)
+  endif()
+endif()
+
+if (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build AND EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build}")
+  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build}")
+else()
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build)
+
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build "" CACHE FILEPATH "the path to ft2build.h" FORCE)
+endif()
+
+# ftheader.h
+if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2}")
+  set (FTHEADER_NAMES ftheader.h config/ftheader.h freetype/config/ftheader.h)
+
+  # set 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2-NOTFOUND" CACHE FILEPATH "the path to ftheader.h" FORCE)
+
+  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
+    find_path (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 NAMES ${FTHEADER_NAMES}
+                                                       HINTS ${3RDPARTY_FREETYPE_DIR}
+                                                       PATH_SUFFIXES include/freetype2 include freetype2
+                                                       CMAKE_FIND_ROOT_PATH_BOTH
+                                                       NO_DEFAULT_PATH)
+  else()
+    find_path (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 NAMES ${FTHEADER_NAMES}
+                                                       PATHS /usr/X11R6 /usr/local/X11R6 /usr/local/X11 /usr/freeware
+                                                       PATH_SUFFIXES include/freetype2 include freetype2
+                                                       CMAKE_FIND_ROOT_PATH_BOTH)
+  endif()
+endif()
+
+if (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 AND EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2}")
+  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2}")
+else()
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2)
+
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "" CACHE FILEPATH "the path to ftheader.h" FORCE)
+endif()
+
+# freetype library
+if (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
+  set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib)
+
+  set (FREETYPE_PATH_SUFFIXES lib)
+  if (ANDROID)
+    set (FREETYPE_PATH_SUFFIXES ${FREETYPE_PATH_SUFFIXES} libs/${ANDROID_ABI})
   endif()
 
-  if (WIN32)
-    set (CMAKE_FIND_LIBRARY_SUFFIXES ".lib" ".dll")
+  # set 3RDPARTY_FREETYPE_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FREETYPE_LIBRARY
+  set (3RDPARTY_FREETYPE_LIBRARY "3RDPARTY_FREETYPE_LIBRARY-NOTFOUND" CACHE FILEPATH "The path to freetype library" FORCE)
 
-    if (NOT 3RDPARTY_FREETYPE_DLL OR NOT EXISTS "${3RDPARTY_FREETYPE_DLL}")
-      get_filename_component (FREETYPE_LIBRARY_PARENT_DIR "${3RDPARTY_FREETYPE_LIBRARY_DIR}" PATH) # parent of the library directory
+  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
+    find_library (3RDPARTY_FREETYPE_LIBRARY freetype
+                                            PATHS "${3RDPARTY_FREETYPE_LIBRARY_DIR}" "${3RDPARTY_FREETYPE_DIR}"
+                                            PATH_SUFFIXES ${FREETYPE_PATH_SUFFIXES}
+                                            CMAKE_FIND_ROOT_PATH_BOTH
+                                            NO_DEFAULT_PATH)
+  else()
+    find_library (3RDPARTY_FREETYPE_LIBRARY freetype 
+                                            PATH_SUFFIXES ${FREETYPE_PATH_SUFFIXES}
+                                            CMAKE_FIND_ROOT_PATH_BOTH)
+  endif()
 
-      set (3RDPARTY_FREETYPE_DLL "3RDPARTY_FREETYPE_DLL-NOTFOUND" CACHE FILEPATH "freetype shared library" FORCE)
-      find_library (3RDPARTY_FREETYPE_DLL freetype PATHS "${FREETYPE_LIBRARY_PARENT_DIR}/bin" NO_DEFAULT_PATH)
+  if (3RDPARTY_FREETYPE_LIBRARY AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
+    get_filename_component (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY}" PATH)
+    set (3RDPARTY_FREETYPE_LIBRARY_DIR "${3RDPARTY_FREETYPE_LIBRARY_DIR}" CACHE PATH "The directory containing freetype library" FORCE)
+  else()
+    set (3RDPARTY_FREETYPE_LIBRARY_DIR "" CACHE PATH "The directory containing freetype library" FORCE)
+  endif()
+endif()
+
+if (3RDPARTY_FREETYPE_LIBRARY_DIR AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
+  list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
+else()
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_LIBRARY_DIR)
+
+  set (3RDPARTY_FREETYPE_LIBRARY "" CACHE FILEPATH "The path to freetype library" FORCE)
+endif()
+
+# freetype shared library
+if (WIN32)
+  if (NOT 3RDPARTY_FREETYPE_DLL OR NOT EXISTS "${3RDPARTY_FREETYPE_DLL}")
+    
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
+
+    # set 3RDPARTY_FREETYPE_DLL as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FREETYPE_DLL
+    set (3RDPARTY_FREETYPE_DLL "3RDPARTY_FREETYPE_DLL-NOTFOUND" CACHE FILEPATH "The path to freetype shared library" FORCE)
+
+    if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
+      find_library (3RDPARTY_FREETYPE_DLL freetype
+                                          PATHS "${3RDPARTY_FREETYPE_DIR}"
+                                          PATH_SUFFIXES bin
+                                          NO_DEFAULT_PATH)
+    else()
+      find_library (3RDPARTY_FREETYPE_DLL freetype
+                                          PATH_SUFFIXES bin)
     endif()
 
     if (3RDPARTY_FREETYPE_DLL AND EXISTS "${3RDPARTY_FREETYPE_DLL}")
       get_filename_component (3RDPARTY_FREETYPE_DLL_DIR "${3RDPARTY_FREETYPE_DLL}" PATH)
-      set (3RDPARTY_FREETYPE_DLL_DIR "${3RDPARTY_FREETYPE_DLL_DIR}" CACHE FILEPATH "The directory containing freetype shared library" FORCE)
+      set (3RDPARTY_FREETYPE_DLL_DIR "${3RDPARTY_FREETYPE_DLL_DIR}" CACHE PATH "The directory containing freetype library" FORCE)
+    else()
+      set (3RDPARTY_FREETYPE_DLL_DIR "" CACHE PATH "The directory containing freetype shared library" FORCE)
+
+      set (3RDPARTY_FREETYPE_DLL "" CACHE FILEPATH "freetype shared library" FORCE)
     endif()
   endif()
-endif()
 
-
-if (NOT 3RDPARTY_FREETYPE_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
-  set (3RDPARTY_FREETYPE_LIBRARY_DIR "" CACHE FILEPATH "The directory containing freetype library" FORCE)
-endif()
-
-if (WIN32)
-  if (NOT 3RDPARTY_FREETYPE_DLL_DIR OR NOT EXISTS "${3RDPARTY_FREETYPE_DLL_DIR}")
-    set (3RDPARTY_FREETYPE_DLL_DIR "" CACHE FILEPATH "The directory containing shared freetype library" FORCE)
-  endif()
-endif()
-
-# include found paths to common variables
-if (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build)
-  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build}")
-else()
-  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build)
-endif()
-
-if (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2)
-  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2}")
-else()
-  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2)
-endif()
-
-if (3RDPARTY_FREETYPE_LIBRARY)
-  list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
-else()
-  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_LIBRARY_DIR)
-endif()
-
-if (WIN32)
-  if (3RDPARTY_FREETYPE_DLL OR EXISTS "${3RDPARTY_FREETYPE_DLL}")
+  if (3RDPARTY_FREETYPE_DLL_DIR OR EXISTS "${3RDPARTY_FREETYPE_DLL_DIR}")
     list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FREETYPE_DLL_DIR}")
   else()
     list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_DLL_DIR)
   endif()
 endif()
 
+
+# install instructions
 if (INSTALL_FREETYPE)
-
   OCCT_MAKE_OS_WITH_BITNESS()
-  if (WIN32)
-    install (FILES "${3RDPARTY_FREETYPE_DLL}"
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-    install (FILES "${3RDPARTY_FREETYPE_DLL}"
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-    install (FILES "${3RDPARTY_FREETYPE_DLL}"
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
-  else()
-    get_filename_component(ABS_PATH ${3RDPARTY_FREETYPE_LIBRARY} REALPATH)
-    get_filename_component(FREETYPELIB ${3RDPARTY_FREETYPE_LIBRARY} NAME)
 
-    install (FILES "${ABS_PATH}"
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-             RENAME ${FREETYPELIB}.6)
-    install (FILES "${ABS_PATH}"
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-             RENAME ${FREETYPELIB}.6)
-    install (FILES "${ABS_PATH}"
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-             RENAME ${FREETYPELIB}.6)
+  if (WIN32)
+    if (DEFINED INSTALL_BIN_DIR)
+      install (FILES "${3RDPARTY_FREETYPE_DLL}" DESTINATION "${INSTALL_BIN_DIR}")
+    else()
+      install (FILES "${3RDPARTY_FREETYPE_DLL}"
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
+      install (FILES "${3RDPARTY_FREETYPE_DLL}"
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
+      install (FILES "${3RDPARTY_FREETYPE_DLL}"
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+    endif()
+  else()
+    get_filename_component(3RDPARTY_FREETYPE_LIBRARY_ABS ${3RDPARTY_FREETYPE_LIBRARY} REALPATH)
+    get_filename_component(3RDPARTY_FREETYPE_LIBRARY_NAME ${3RDPARTY_FREETYPE_LIBRARY} NAME)
+
+    if (DEFINED INSTALL_LIB_DIR)
+      install (FILES "${3RDPARTY_FREETYPE_LIBRARY_ABS}"
+               DESTINATION "${INSTALL_LIB_DIR}"
+               RENAME ${3RDPARTY_FREETYPE_LIBRARY_NAME}.6)
+    else()
+      install (FILES "${3RDPARTY_FREETYPE_LIBRARY_ABS}"
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
+               RENAME ${3RDPARTY_FREETYPE_LIBRARY_NAME}.6)
+      install (FILES "${3RDPARTY_FREETYPE_LIBRARY_ABS}"
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
+               RENAME ${3RDPARTY_FREETYPE_LIBRARY_NAME}.6)
+      install (FILES "${3RDPARTY_FREETYPE_LIBRARY_ABS}"
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
+               RENAME ${3RDPARTY_FREETYPE_LIBRARY_NAME}.6)
+    endif()
   endif()
 
   set (USED_3RDPARTY_FREETYPE_DIR "")
@@ -252,4 +344,4 @@ OCCT_CHECK_AND_UNSET(FREETYPE_INCLUDE_DIR_ft2build)
 OCCT_CHECK_AND_UNSET(FREETYPE_INCLUDE_DIR_freetype2)
 OCCT_CHECK_AND_UNSET(FREETYPE_LIBRARY)
 
-mark_as_advanced (3RDPARTY_FREETYPE_LIBRARY 3RDPARTY_FREETYPE_DLL)
+mark_as_advanced (3RDPARTY_FREETYPE_LIBRARY 3RDPARTY_FREETYPE_DLL)

adm/cmake/occt_csf.cmake

@@ -0,0 +1,121 @@
+# CSF variables definition
+
+if(CSFS_ALREADY_INCLUDED)
+  return()
+endif()
+set(CSFS_ALREADY_INCLUDED 1)
+
+
+if (NOT DEFINED USE_TCL)
+  OCCT_IS_PRODUCT_REQUIRED (CSF_TclLibs USE_TCL)
+endif()
+
+if (USE_TCL)
+  if ("${3RDPARTY_TCL_LIBRARY_VERSION}" STREQUAL "")
+    message (STATUS "Warning: TCL version has not been specified by CSF_TclLibs defining thus it will be used as 8.6")
+    set (3RDPARTY_TCL_LIBRARY_VERSION "8.6")
+  endif()
+
+  if ("${3RDPARTY_TK_LIBRARY_VERSION}" STREQUAL "")
+    message (STATUS "Warning: TK version has not been specified by CSF_TclTkLibs defining thus it will be used as 8.6")
+    set (3RDPARTY_TK_LIBRARY_VERSION "8.6")
+  endif()
+endif()
+
+if (USE_TBB)
+  set (CSF_TBB "tbb tbbmalloc")
+else()
+  set (CSF_TBB)
+endif()
+
+if (WIN32)
+  set (CSF_advapi32      "advapi32.lib")
+  set (CSF_gdi32         "gdi32.lib")
+  set (CSF_user32        "user32.lib")
+  set (CSF_wsock32       "wsock32.lib")
+  set (CSF_winspool      "Winspool.lib")
+  set (CSF_psapi         "Psapi.lib")
+  set (CSF_AviLibs       "ws2_32.lib vfw32.lib")
+  set (CSF_OpenGlLibs    "opengl32.lib glu32.lib")
+
+  if (USE_FREETYPE)
+    set (CSF_FREETYPE "freetype.lib")
+  else()
+    set (CSF_FREETYPE)
+  endif()
+
+  if (USE_FREEIMAGE)
+    set (CSF_FreeImagePlus "freeimage.lib freeimageplus.lib")
+  else()
+    set (CSF_FreeImagePlus)
+  endif()
+
+  if (USE_TCL)
+    set (CSF_TclLibs     "tcl${3RDPARTY_TCL_LIBRARY_VERSION}.lib")
+    set (CSF_TclTkLibs   "tk${3RDPARTY_TK_LIBRARY_VERSION}.lib")
+  endif()
+
+else()
+
+  if (APPLE)
+    set (CSF_objc        "objc")
+
+    # frameworks
+    find_library (Appkit_LIB NAMES Appkit)
+    set (CSF_Appkit ${Appkit_LIB})
+
+    find_library (IOKit_LIB NAMES IOKit)
+    set (CSF_IOKit ${IOKit_LIB})
+
+    OCCT_CHECK_AND_UNSET (Appkit_LIB)
+    OCCT_CHECK_AND_UNSET (IOKit_LIB)
+
+    if (USE_GLX)
+      set (CSF_OpenGlLibs GL)
+      set (CSF_XwLibs     "X11 Xext Xmu Xi")
+    else()
+      find_library (OpenGlLibs_LIB NAMES OpenGL)
+      set (CSF_OpenGlLibs ${OpenGlLibs_LIB})
+
+      OCCT_CHECK_AND_UNSET (OpenGlLibs_LIB)
+    endif()
+    
+    if (USE_TCL)
+      set (CSF_TclTkLibs Tk)
+      set (CSF_TclLibs   Tcl)
+    endif()
+  elseif (ANDROID)
+    set (CSF_ThreadLibs  "c")
+    set (CSF_OpenGlLibs  "EGL GLESv2")
+  elseif (UNIX)
+    set (CSF_ThreadLibs  "pthread rt stdc++")
+    set (CSF_OpenGlLibs  "GLU GL")
+    set (CSF_XwLibs      "X11 Xext Xmu Xi")
+    set (CSF_dl          "dl")
+
+    if (USE_TCL)
+      set (CSF_TclLibs     "tcl${3RDPARTY_TCL_LIBRARY_VERSION}")
+      set (CSF_TclTkLibs   "tk${3RDPARTY_TK_LIBRARY_VERSION}")
+    endif()
+  endif()
+
+  if (USE_FREETYPE)
+    set (CSF_FREETYPE "freetype")
+  else()
+    set (CSF_FREETYPE)
+  endif()
+
+  if (USE_FREEIMAGE)
+    set (CSF_FreeImagePlus "freeimage")
+  else()
+    set (CSF_FreeImagePlus)
+  endif()
+
+  if (NOT DEFINED ANDROID)
+    if (USE_GL2PS)
+      set (CSF_GL2PS "gl2ps")
+    else()
+      set (CSF_GL2PS)
+    endif()
+  endif()
+endif()

adm/cmake/occt_defs_flags.cmake

@@ -1,70 +1,84 @@
+##
 
+if(FLAGS_ALREADY_INCLUDED)
+  return()
+endif()
+set(FLAGS_ALREADY_INCLUDED 1)
+
+# force option -fp:precise for Visual Studio projects.
+#
+# Note that while this option is default for MSVC compiler, Visual Studio
+# project can be switched later to use Intel Compiler (ICC).
+# Enforcing -fp:precise ensures that in such case ICC will use correct
+# option instead of its default -fp:fast which is harmful for OCCT.
 if (MSVC)
-  add_definitions(/fp:precise)
+  set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fp:precise")
+  set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   -fp:precise")
 endif()
 
 # set compiler short name and choose SSE2 option for appropriate MSVC compilers
 # ONLY for 32-bit
 if (NOT CMAKE_SIZEOF_VOID_P EQUAL 8)
   if (MSVC80 OR MSVC90 OR MSVC10)
-    add_definitions(/arch:SSE2)
+    set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:SSE2")
+    set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   /arch:SSE2")
   endif()
 endif()
 
 if (WIN32)
-  add_definitions (-wd4996)
-elseif (APPLE)
-  add_definitions (-fexceptions -fPIC -DOCC_CONVERT_SIGNALS)
+  add_definitions (-D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE)
 else()
-  add_definitions (-fexceptions -fPIC -DOCC_CONVERT_SIGNALS)
+  set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fexceptions -fPIC")
+  set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   -fexceptions -fPIC")
+  add_definitions(-DOCC_CONVERT_SIGNALS)
 endif()
 
 # enable structured exceptions for MSVC
 string (REGEX MATCH "EHsc" ISFLAG "${CMAKE_CXX_FLAGS}")
 if (ISFLAG)
   string (REGEX REPLACE "EHsc" "EHa" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
-elseif (WIN32)
+elseif (MSVC)
   set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -EHa")
 endif()
 
 # remove _WINDOWS flag if it exists
 string (REGEX MATCH "/D_WINDOWS" IS_WINDOWSFLAG "${CMAKE_CXX_FLAGS}")
 if (IS_WINDOWSFLAG)
-  message (STATUS "/D_WINDOWS has been removed from CMAKE_CXX_FLAGS")
+  message (STATUS "Info: /D_WINDOWS has been removed from CMAKE_CXX_FLAGS")
   string (REGEX REPLACE "/D_WINDOWS" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
 endif()
 
 # remove WIN32 flag if it exists
 string (REGEX MATCH "/DWIN32" IS_WIN32FLAG "${CMAKE_CXX_FLAGS}")
 if (IS_WIN32FLAG)
-  message (STATUS "/DWIN32 has been removed from CMAKE_CXX_FLAGS")
+  message (STATUS "Info: /DWIN32 has been removed from CMAKE_CXX_FLAGS")
   string (REGEX REPLACE "/DWIN32" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
 endif()
 
 # remove _WINDOWS flag if it exists
 string (REGEX MATCH "/D_WINDOWS" IS_WINDOWSFLAG "${CMAKE_C_FLAGS}")
 if (IS_WINDOWSFLAG)
-  message (STATUS "/D_WINDOWS has been removed from CMAKE_C_FLAGS")
+  message (STATUS "Info: /D_WINDOWS has been removed from CMAKE_C_FLAGS")
   string (REGEX REPLACE "/D_WINDOWS" "" CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
 endif()
 
 # remove WIN32 flag if it exists
 string (REGEX MATCH "/DWIN32" IS_WIN32FLAG "${CMAKE_C_FLAGS}")
 if (IS_WIN32FLAG)
-  message (STATUS "/DWIN32 has been removed from CMAKE_C_FLAGS")
+  message (STATUS "Info: /DWIN32 has been removed from CMAKE_C_FLAGS")
   string (REGEX REPLACE "/DWIN32" "" CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
 endif()
 
 # remove DEBUG flag if it exists
 string (REGEX MATCH "-DDEBUG" IS_DEBUG_CXX "${CMAKE_CXX_FLAGS_DEBUG}")
 if (IS_DEBUG_CXX)
-  message (STATUS "-DDEBUG has been removed from CMAKE_CXX_FLAGS_DEBUG")
+  message (STATUS "Info: -DDEBUG has been removed from CMAKE_CXX_FLAGS_DEBUG")
   string (REGEX REPLACE "-DDEBUG" "" CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG}")
 endif()
 
 string (REGEX MATCH "-DDEBUG" IS_DEBUG_C "${CMAKE_C_FLAGS_DEBUG}")
 if (IS_DEBUG_C)
-  message (STATUS "-DDEBUG has been removed from CMAKE_C_FLAGS_DEBUG")
+  message (STATUS "Info: -DDEBUG has been removed from CMAKE_C_FLAGS_DEBUG")
   string (REGEX REPLACE "-DDEBUG" "" CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG}")
 endif()
 # enable parallel compilation on MSVC 9 and above
@@ -75,20 +89,42 @@ endif()
 # generate a single response file which enlist all of the object files
 SET(CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS 1)
 SET(CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS 1)
-# increase compiler warnings level (-W4 for MSVC, -Wall for GCC)
+# increase compiler warnings level (-W4 for MSVC, -Wextra for GCC)
 if (MSVC)
   if (CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
     string (REGEX REPLACE "/W[0-4]" "/W4" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
   else()
     set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")
   endif()
-elseif (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
+elseif (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wextra")
+  if (BUILD_SHARED_LIBS)
+    if (APPLE)
+      set (CMAKE_SHARED_LINKER_FLAGS "-lm ${CMAKE_SHARED_LINKER_FLAGS}")
+    elseif(NOT WIN32)
+      set (CMAKE_SHARED_LINKER_FLAGS "-lm ${CMAKE_SHARED_LINKER_FLAGS}")
+    endif()
+  else()
+    if (NOT ANDROID AND NOT MINGW)
+      set (CMAKE_STATIC_LINKER_FLAGS "-lm ${CMAKE_SHARED_STATIC_FLAGS}")
+    endif()
+  endif()
 endif()
 
-if (DEFINED CMAKE_COMPILER_IS_GNUCXX OR "x${CMAKE_CXX_COMPILER_ID}" STREQUAL "xClang")
+if(MINGW)
+  set (CMAKE_CXX_FLAGS "-std=gnu++0x ${CMAKE_CXX_FLAGS}")
+  add_definitions(-D_WIN32_WINNT=0x0501)
+  # workaround bugs in mingw with vtable export
+  set (CMAKE_SHARED_LINKER_FLAGS "-Wl,--export-all-symbols")
+elseif (DEFINED CMAKE_COMPILER_IS_GNUCXX OR "x${CMAKE_CXX_COMPILER_ID}" STREQUAL "xClang")
   set (CMAKE_CXX_FLAGS "-std=c++0x ${CMAKE_CXX_FLAGS}")
 endif()
 
+# Optimize size of binaries
+if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX OR MINGW)
+  set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -s")
+  set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -s")
+endif()
+
 set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -DNo_Exception")
-set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DNo_Exception")
+set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DNo_Exception")

adm/cmake/occt_macros.cmake

@@ -1,4 +1,11 @@
-#
+##
+
+if(OCCT_MACROS_ALREADY_INCLUDED)
+  return()
+endif()
+set(OCCT_MACROS_ALREADY_INCLUDED 1)
+
+
 macro (OCCT_CHECK_AND_UNSET VARNAME)
   if (DEFINED ${VARNAME})
     unset (${VARNAME} CACHE)
@@ -84,22 +91,21 @@ endfunction()
 
 function (OCCT_ORIGIN_AND_PATCHED_FILES RELATIVE_PATH SEARCH_TEMPLATE RESULT)
 
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${RELATIVE_PATH}")
-    file (GLOB FOUND_FILES "${APPLY_OCCT_PATCH_DIR}/${RELATIVE_PATH}/${SEARCH_TEMPLATE}")
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_PATH}")
+    file (GLOB FOUND_FILES "${BUILD_PATCH}/${RELATIVE_PATH}/${SEARCH_TEMPLATE}")
   endif()
 
   file (GLOB ORIGIN_FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_PATH}/${SEARCH_TEMPLATE}")
   foreach (ORIGIN_FILE ${ORIGIN_FILES})
     # check for existence of patched version of current file
-    if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${RELATIVE_PATH}")
+    if (NOT BUILD_PATCH OR NOT EXISTS "${BUILD_PATCH}/${RELATIVE_PATH}")
+      list (APPEND FOUND_FILES ${ORIGIN_FILE})
+    else()
       get_filename_component (ORIGIN_FILE_NAME "${ORIGIN_FILE}" NAME)
-      if (EXISTS "${APPLY_OCCT_PATCH_DIR}/${RELATIVE_PATH}/${ORIGIN_FILE_NAME}")
-        continue()
+      if (NOT EXISTS "${BUILD_PATCH}/${RELATIVE_PATH}/${ORIGIN_FILE_NAME}")
+        list (APPEND FOUND_FILES ${ORIGIN_FILE})
       endif()
     endif()
-
-    # append origin version if patched one is not found
-    list (APPEND FOUND_FILES ${ORIGIN_FILE})
   endforeach()
 
   set (${RESULT} ${FOUND_FILES} PARENT_SCOPE)
@@ -111,16 +117,12 @@ function (FIND_PRODUCT_DIR ROOT_DIR PRODUCT_NAME RESULT)
 
   string (TOLOWER "${PRODUCT_NAME}" lower_PRODUCT_NAME)
 
-  list (APPEND SEARCH_TEMPLATES "^${lower_PRODUCT_NAME}.*${COMPILER}.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "^${lower_PRODUCT_NAME}.*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "^${lower_PRODUCT_NAME}.*[0-9.]+.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "^${lower_PRODUCT_NAME}.*[0-9.]+")
-  list (APPEND SEARCH_TEMPLATES "^${lower_PRODUCT_NAME}")
-  list (APPEND SEARCH_TEMPLATES "${lower_PRODUCT_NAME}.*${COMPILER}.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "${lower_PRODUCT_NAME}.*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "${lower_PRODUCT_NAME}.*[0-9.]+.*${COMPILER_BITNESS}")
-  list (APPEND SEARCH_TEMPLATES "${lower_PRODUCT_NAME}.*[0-9.]+")
-  list (APPEND SEARCH_TEMPLATES "${lower_PRODUCT_NAME}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*${COMPILER}.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*")
 
   SUBDIRECTORY_NAMES ("${ROOT_DIR}" SUBDIR_NAME_LIST)
 
@@ -140,23 +142,21 @@ function (FIND_PRODUCT_DIR ROOT_DIR PRODUCT_NAME RESULT)
   endforeach()
 
   if (LOCAL_RESULT)
-    list (LENGTH "${LOCAL_RESULT}" LOC_LEN)
-    math (EXPR LAST_ELEMENT_INDEX "${LOC_LEN}-1")
-    list (GET LOCAL_RESULT ${LAST_ELEMENT_INDEX} DUMMY)
+    list (GET LOCAL_RESULT -1 DUMMY)
     set (${RESULT} ${DUMMY} PARENT_SCOPE)
   endif()
 endfunction()
 
 macro (OCCT_INSTALL_FILE_OR_DIR BEING_INSTALLED_OBJECT DESTINATION_PATH)
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${BEING_INSTALLED_OBJECT}")
-    if (IS_DIRECTORY "${APPLY_OCCT_PATCH_DIR}/${BEING_INSTALLED_OBJECT}")
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${BEING_INSTALLED_OBJECT}")
+    if (IS_DIRECTORY "${BUILD_PATCH}/${BEING_INSTALLED_OBJECT}")
       # first of all, install original files
       install (DIRECTORY "${CMAKE_SOURCE_DIR}/${BEING_INSTALLED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
 
       # secondly, rewrite original files with patched ones
-      install (DIRECTORY "${APPLY_OCCT_PATCH_DIR}/${BEING_INSTALLED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
+      install (DIRECTORY "${BUILD_PATCH}/${BEING_INSTALLED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
     else()
-      install (FILES     "${APPLY_OCCT_PATCH_DIR}/${BEING_INSTALLED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
+      install (FILES     "${BUILD_PATCH}/${BEING_INSTALLED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
     endif()
   else()
     if (IS_DIRECTORY "${CMAKE_SOURCE_DIR}/${BEING_INSTALLED_OBJECT}")
@@ -168,8 +168,8 @@ macro (OCCT_INSTALL_FILE_OR_DIR BEING_INSTALLED_OBJECT DESTINATION_PATH)
 endmacro()
 
 macro (OCCT_CONFIGURE_AND_INSTALL BEING_CONGIRUGED_FILE BUILD_NAME INSTALL_NAME DESTINATION_PATH)
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${BEING_CONGIRUGED_FILE}")
-    configure_file("${APPLY_OCCT_PATCH_DIR}/${BEING_CONGIRUGED_FILE}" "${BUILD_NAME}" @ONLY)
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${BEING_CONGIRUGED_FILE}")
+    configure_file("${BUILD_PATCH}/${BEING_CONGIRUGED_FILE}" "${BUILD_NAME}" @ONLY)
   else()
     configure_file("${CMAKE_SOURCE_DIR}/${BEING_CONGIRUGED_FILE}" "${BUILD_NAME}" @ONLY)
   endif()
@@ -178,54 +178,147 @@ macro (OCCT_CONFIGURE_AND_INSTALL BEING_CONGIRUGED_FILE BUILD_NAME INSTALL_NAME
 endmacro()
 
 macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOOLKITS)
-  set (OCCT_SOURCE_DIRS)
+  set (OCCT_USED_PACKAGES)
 
   # consider patched header.in template
   set (TEMPLATE_HEADER_PATH "${CMAKE_SOURCE_DIR}/adm/templates/header.in")
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/adm/templates/header.in")
-    set (TEMPLATE_HEADER_PATH "${APPLY_OCCT_PATCH_DIR}/adm/templates/header.in")
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/header.in")
+    set (TEMPLATE_HEADER_PATH "${BUILD_PATCH}/adm/templates/header.in")
   endif()
 
   set (ROOT_OCCT_DIR ${CMAKE_SOURCE_DIR})
 
   foreach (OCCT_USED_TOOLKIT ${OCCT_BUILD_TOOLKITS})
-    # append parent folder
-    list (APPEND OCCT_SOURCE_DIRS ${OCCT_USED_TOOLKIT})
-
     # append all required package folders
-    set (OCCT_USED_TOOLKIT_DEPS)
-    if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_USED_TOOLKIT}/PACKAGES")
-      file (STRINGS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_USED_TOOLKIT}/PACKAGES" OCCT_USED_TOOLKIT_DEPS)
+    set (OCCT_TOOLKIT_PACKAGES)
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_USED_TOOLKIT}/PACKAGES")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_USED_TOOLKIT}/PACKAGES" OCCT_TOOLKIT_PACKAGES)
     elseif (EXISTS "${CMAKE_SOURCE_DIR}/src/${OCCT_USED_TOOLKIT}/PACKAGES")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_USED_TOOLKIT}/PACKAGES" OCCT_USED_TOOLKIT_DEPS)
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_USED_TOOLKIT}/PACKAGES" OCCT_TOOLKIT_PACKAGES)
     endif()
 
-    foreach (OCCT_USED_TOOLKIT_DEP ${OCCT_USED_TOOLKIT_DEPS})
-      list (APPEND OCCT_SOURCE_DIRS ${OCCT_USED_TOOLKIT_DEP})
-    endforeach()
+    list (APPEND OCCT_USED_PACKAGES ${OCCT_TOOLKIT_PACKAGES})
   endforeach()
 
-  foreach (OCCT_SOURCE_DIR ${OCCT_SOURCE_DIRS})
-    # get all header files from each src folder
-    file (GLOB OCCT_HEADER_FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_SOURCE_DIR}/*.[hgl]xx" "${CMAKE_SOURCE_DIR}/src/${OCCT_SOURCE_DIR}/*.h")
-    install (FILES ${OCCT_HEADER_FILES} DESTINATION "${INSTALL_DIR}/inc")
+  list (REMOVE_DUPLICATES OCCT_USED_PACKAGES)
 
-    # create new file including found header
-    foreach (OCCT_HEADER_FILE ${OCCT_HEADER_FILES})
-      get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE} NAME)
-      configure_file ("${TEMPLATE_HEADER_PATH}" "${ROOT_TARGET_OCCT_DIR}/inc/${HEADER_FILE_NAME}" @ONLY)
+  set (OCCT_HEADER_FILES_COMPLETE)
+  set (OCCT_HEADER_FILE_NAMES_NOT_IN_FILES)
+  set (OCCT_HEADER_FILE_WITH_PROPER_NAMES)
+
+  string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
+  message (STATUS "Info: \(${CURRENT_TIME}\) Compare FILES with files in package directories...")
+
+  foreach (OCCT_PACKAGE ${OCCT_USED_PACKAGES})
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" OCCT_ALL_FILE_NAMES)
+    elseif (EXISTS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES" OCCT_ALL_FILE_NAMES)
+    else()
+      message (WARNING "FILES has not been found in ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}")
+      continue()
+    endif()
+
+    list (LENGTH OCCT_ALL_FILE_NAMES ALL_FILES_NB)
+    math (EXPR ALL_FILES_NB "${ALL_FILES_NB} - 1" )
+
+    # emit warnings if there is unprocessed headers
+    file (GLOB OCCT_ALL_FILES_IN_DIR "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/*.*")
+    file (GLOB OCCT_ALL_FILES_IN_PATCH_DIR "${BUILD_PATCH}/src/${OCCT_PACKAGE}/*.*")
+
+    # use patched header files
+    foreach (OCCT_FILE_IN_PATCH_DIR ${OCCT_ALL_FILES_IN_PATCH_DIR})
+      get_filename_component (OCCT_FILE_IN_PATCH_DIR_NAME ${OCCT_FILE_IN_PATCH_DIR} NAME)
+      list (REMOVE_ITEM OCCT_ALL_FILES_IN_DIR "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${OCCT_FILE_IN_PATCH_DIR_NAME}")
+      list (APPEND OCCT_ALL_FILES_IN_DIR "${OCCT_FILE_IN_PATCH_DIR}")
     endforeach()
 
-    # consider pathed the source files
-    if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_SOURCE_DIR}")
-      file (GLOB PATCHED_OCCT_HEADER_FILES "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_SOURCE_DIR}/*.[hgl]xx" "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_SOURCE_DIR}/*.h")
-      install (FILES ${PATCHED_OCCT_HEADER_FILES} DESTINATION "${INSTALL_DIR}/inc")
+    foreach (OCCT_FILE_IN_DIR ${OCCT_ALL_FILES_IN_DIR})
+      get_filename_component (OCCT_FILE_IN_DIR_NAME ${OCCT_FILE_IN_DIR} NAME)
 
-      # create new patched file including found header
-      foreach (OCCT_HEADER_FILE ${PATCHED_OCCT_HEADER_FILES})
-        get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE} NAME)
-        configure_file ("${TEMPLATE_HEADER_PATH}" "${ROOT_TARGET_OCCT_DIR}/inc/${HEADER_FILE_NAME}" @ONLY)
+      set (OCCT_FILE_IN_DIR_STATUS OFF)
+
+      if (${ALL_FILES_NB} LESS 0)
+        break()
+      endif()
+
+      foreach (FILE_INDEX RANGE ${ALL_FILES_NB})
+        list (GET OCCT_ALL_FILE_NAMES ${FILE_INDEX} OCCT_FILE_NAME)
+
+        if ("${OCCT_FILE_IN_DIR_NAME}" STREQUAL "${OCCT_FILE_NAME}")
+          set (OCCT_FILE_IN_DIR_STATUS ON)
+
+          string (REGEX MATCH ".+\\.[hlg]xx|.+\\.h$" IS_HEADER_FOUND "${OCCT_FILE_NAME}")
+          if (IS_HEADER_FOUND)
+            list (APPEND OCCT_HEADER_FILES_COMPLETE ${OCCT_FILE_IN_DIR})
+
+            # collect header files with name that does not contain its package one
+            string (FIND "${OCCT_FILE_NAME}" "${OCCT_PACKAGE}_" FOUND_INDEX)
+            if (NOT ${FOUND_INDEX} EQUAL 0)
+              list (APPEND OCCT_HEADER_FILE_WITH_PROPER_NAMES "${OCCT_FILE_NAME}")
+            endif()
+          endif()
+
+          # remove found element from list
+          list (REMOVE_AT OCCT_ALL_FILE_NAMES ${FILE_INDEX})
+          math (EXPR ALL_FILES_NB "${ALL_FILES_NB} - 1" ) # decrement number
+
+          break()
+        endif()
       endforeach()
+
+      if (NOT OCCT_FILE_IN_DIR_STATUS)
+        message (STATUS "Warning. File ${OCCT_FILE_IN_DIR} is not listed in ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES")
+
+        string (REGEX MATCH ".+\\.[hlg]xx|.+\\.h$" IS_HEADER_FOUND "${OCCT_FILE_NAME}")
+        if (IS_HEADER_FOUND)
+          list (APPEND OCCT_HEADER_FILE_NAMES_NOT_IN_FILES ${OCCT_FILE_NAME})
+        endif()
+      endif()
+    endforeach()
+  endforeach()
+  
+  # create new file including found header
+  string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
+  message (STATUS "Info: \(${CURRENT_TIME}\) Create header-links in inc folder...")
+
+  foreach (OCCT_HEADER_FILE ${OCCT_HEADER_FILES_COMPLETE})
+    get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE} NAME)
+    configure_file ("${TEMPLATE_HEADER_PATH}" "${ROOT_TARGET_OCCT_DIR}/inc/${HEADER_FILE_NAME}" @ONLY)
+  endforeach()
+  
+  install (FILES ${OCCT_HEADER_FILES_COMPLETE} DESTINATION "${INSTALL_INCLUDE_DIR}")
+  
+  string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
+  message (STATUS "Info: \(${CURRENT_TIME}\) Checking headers in inc folder...")
+    
+  file (GLOB OCCT_HEADER_FILES_OLD "${ROOT_TARGET_OCCT_DIR}/inc/*")
+  foreach (OCCT_HEADER_FILE_OLD ${OCCT_HEADER_FILES_OLD})
+    get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE_OLD} NAME)
+    string (REGEX MATCH "^[a-zA-Z0-9]+" PACKAGE_NAME "${HEADER_FILE_NAME}")
+    
+    list (FIND OCCT_USED_PACKAGES ${PACKAGE_NAME} IS_HEADER_FOUND)
+    if (NOT ${IS_HEADER_FOUND} EQUAL -1)
+      if (NOT EXISTS "${CMAKE_SOURCE_DIR}/src/${PACKAGE_NAME}/${HEADER_FILE_NAME}")
+        message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is not presented in the sources and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
+        file (REMOVE "${OCCT_HEADER_FILE_OLD}")
+      else()
+        list (FIND OCCT_HEADER_FILE_NAMES_NOT_IN_FILES ${PACKAGE_NAME} IS_HEADER_FOUND)
+        if (NOT ${IS_HEADER_FOUND} EQUAL -1)
+          message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is presented in the sources but not involved in FILES and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
+          file (REMOVE "${OCCT_HEADER_FILE_OLD}")
+        endif()
+      endif()
+    else()
+      set (IS_HEADER_FOUND -1)
+      if (NOT "${OCCT_HEADER_FILE_WITH_PROPER_NAMES}" STREQUAL "")
+        list (FIND OCCT_HEADER_FILE_WITH_PROPER_NAMES ${HEADER_FILE_NAME} IS_HEADER_FOUND)
+      endif()
+      
+      if (${IS_HEADER_FOUND} EQUAL -1)
+        message (STATUS "Warning. \(${PACKAGE_NAME}\) ${OCCT_HEADER_FILE_OLD} is not used and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
+        file (REMOVE "${OCCT_HEADER_FILE_OLD}")
+      endif()
     endif()
   endforeach()
 endmacro()
@@ -236,23 +329,23 @@ macro (OCCT_COPY_FILE_OR_DIR BEING_COPIED_OBJECT DESTINATION_PATH)
     file (COPY "${CMAKE_SOURCE_DIR}/${BEING_COPIED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
   endif()
 
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${BEING_COPIED_OBJECT}")
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${BEING_COPIED_OBJECT}")
     # secondly, rewrite original files with patched ones
-    file (COPY "${APPLY_OCCT_PATCH_DIR}/${BEING_COPIED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
+    file (COPY "${BUILD_PATCH}/${BEING_COPIED_OBJECT}" DESTINATION  "${DESTINATION_PATH}")
   endif()
 endmacro()
 
 macro (OCCT_CONFIGURE BEING_CONGIRUGED_FILE FINAL_NAME)
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${BEING_CONGIRUGED_FILE}")
-    configure_file("${APPLY_OCCT_PATCH_DIR}/${BEING_CONGIRUGED_FILE}" "${FINAL_NAME}" @ONLY)
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${BEING_CONGIRUGED_FILE}")
+    configure_file("${BUILD_PATCH}/${BEING_CONGIRUGED_FILE}" "${FINAL_NAME}" @ONLY)
   else()
     configure_file("${CMAKE_SOURCE_DIR}/${BEING_CONGIRUGED_FILE}" "${FINAL_NAME}" @ONLY)
   endif()
 endmacro()
 
 macro (OCCT_ADD_SUBDIRECTORY BEING_ADDED_DIRECTORY)
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${BEING_ADDED_DIRECTORY}/CMakeLists.txt")
-    add_subdirectory(${APPLY_OCCT_PATCH_DIR}/${BEING_ADDED_DIRECTORY})
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${BEING_ADDED_DIRECTORY}/CMakeLists.txt")
+    add_subdirectory(${BUILD_PATCH}/${BEING_ADDED_DIRECTORY})
   elseif (EXISTS "${CMAKE_SOURCE_DIR}/${BEING_ADDED_DIRECTORY}/CMakeLists.txt")
     add_subdirectory (${CMAKE_SOURCE_DIR}/${BEING_ADDED_DIRECTORY})
   else()
@@ -267,8 +360,8 @@ function (OCCT_IS_PRODUCT_REQUIRED CSF_VAR_NAME USE_PRODUCT)
     message(STATUS "Warning: the list of being used toolkits is empty")
   else()
     foreach (USED_TOOLKIT ${BUILD_TOOLKITS})
-      if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/src/${USED_TOOLKIT}/EXTERNLIB")
-        file (READ "${APPLY_OCCT_PATCH_DIR}/src/${USED_TOOLKIT}/EXTERNLIB" FILE_CONTENT)
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${USED_TOOLKIT}/EXTERNLIB")
+        file (READ "${BUILD_PATCH}/src/${USED_TOOLKIT}/EXTERNLIB" FILE_CONTENT)
       elseif (EXISTS "${CMAKE_SOURCE_DIR}/src/${USED_TOOLKIT}/EXTERNLIB")
         file (READ "${CMAKE_SOURCE_DIR}/src/${USED_TOOLKIT}/EXTERNLIB" FILE_CONTENT)
       endif()
@@ -285,8 +378,8 @@ endfunction()
 
 function (FILE_TO_LIST FILE_NAME FILE_CONTENT)
   set (LOCAL_FILE_CONTENT)
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/${FILE_NAME}")
-    file (STRINGS "${APPLY_OCCT_PATCH_DIR}/${FILE_NAME}" LOCAL_FILE_CONTENT)
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${FILE_NAME}")
+    file (STRINGS "${BUILD_PATCH}/${FILE_NAME}" LOCAL_FILE_CONTENT)
   elseif (EXISTS "${CMAKE_SOURCE_DIR}/${FILE_NAME}")
     file (STRINGS "${CMAKE_SOURCE_DIR}/${FILE_NAME}" LOCAL_FILE_CONTENT)
   endif()
@@ -377,27 +470,60 @@ function (OCCT_MODULES_AND_TOOLKITS MODULE_LIST)
   set (${MODULE_LIST} ${${MODULE_LIST}} PARENT_SCOPE)
 endfunction()
 
-# Returns OCCT version string from file Standard_Version.hxx (if available)
-function (OCCT_VERSION OCCT_VERSION_VAR)
-  set (OCC_VERSION_COMPLETE "7.1.0")
-  set (OCC_VERSION_DEVELOPMENT "")
-  
-  set (OCCT_VERSION_LOCALVAR "${OCC_VERSION_COMPLETE}.${OCC_VERSION_DEVELOPMENT}")
+# Returns OCC version string from file Standard_Version.hxx (if available)
+function (OCC_VERSION OCC_VERSION_MAJOR OCC_VERSION_MINOR OCC_VERSION_MAINTENANCE OCC_VERSION_DEVELOPMENT OCC_VERSION_STRING_EXT)
 
+  set (OCC_VERSION_MAJOR         7)
+  set (OCC_VERSION_MINOR         0)
+  set (OCC_VERSION_MAINTENANCE   0)
+  set (OCC_VERSION_DEVELOPMENT   dev)
+  set (OCC_VERSION_COMPLETE      "7.0.0")
+ 
   set (STANDARD_VERSION_FILE "${CMAKE_SOURCE_DIR}/src/Standard/Standard_Version.hxx")
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/Standard/Standard_Version.hxx")
+    set (STANDARD_VERSION_FILE "${BUILD_PATCH}/src/Standard/Standard_Version.hxx")
+  endif()
+
   if (EXISTS "${STANDARD_VERSION_FILE}")
-    foreach (SOUGHT_VERSION OCC_VERSION_COMPLETE OCC_VERSION_DEVELOPMENT)
+    foreach (SOUGHT_VERSION OCC_VERSION_MAJOR OCC_VERSION_MINOR OCC_VERSION_MAINTENANCE)
+      file (STRINGS "${STANDARD_VERSION_FILE}" ${SOUGHT_VERSION} REGEX "^#define ${SOUGHT_VERSION} .*")
+      string (REGEX REPLACE ".*${SOUGHT_VERSION} .*([^ ]+).*" "\\1" ${SOUGHT_VERSION} "${${SOUGHT_VERSION}}" )
+    endforeach()
+    
+    foreach (SOUGHT_VERSION OCC_VERSION_DEVELOPMENT OCC_VERSION_COMPLETE)
       file (STRINGS "${STANDARD_VERSION_FILE}" ${SOUGHT_VERSION} REGEX "^#define ${SOUGHT_VERSION} .*")
       string (REGEX REPLACE ".*${SOUGHT_VERSION} .*\"([^ ]+)\".*" "\\1" ${SOUGHT_VERSION} "${${SOUGHT_VERSION}}" )
     endforeach()
-    
-    if (NOT "${OCC_VERSION_DEVELOPMENT}" STREQUAL "")
-      set (OCCT_VERSION_LOCALVAR "${OCC_VERSION_COMPLETE}.${OCC_VERSION_DEVELOPMENT}")
-    else()
-      set (OCCT_VERSION_LOCALVAR "${OCC_VERSION_COMPLETE}")
-    endif()
   endif()
-
-  set (${OCCT_VERSION_VAR} "${OCCT_VERSION_LOCALVAR}" PARENT_SCOPE)
+ 
+  set (OCC_VERSION_MAJOR "${OCC_VERSION_MAJOR}" PARENT_SCOPE)
+  set (OCC_VERSION_MINOR "${OCC_VERSION_MINOR}" PARENT_SCOPE)
+  set (OCC_VERSION_MAINTENANCE "${OCC_VERSION_MAINTENANCE}" PARENT_SCOPE)
+  set (OCC_VERSION_DEVELOPMENT "${OCC_VERSION_DEVELOPMENT}" PARENT_SCOPE)
+  
+  if (OCC_VERSION_DEVELOPMENT AND OCC_VERSION_COMPLETE)
+    set (OCC_VERSION_STRING_EXT "${OCC_VERSION_COMPLETE}.${OCC_VERSION_DEVELOPMENT}" PARENT_SCOPE)
+  else()
+    set (OCC_VERSION_STRING_EXT "${OCC_VERSION_COMPLETE}" PARENT_SCOPE)
+  endif()
 endfunction()
 
+macro (CHECK_PATH_FOR_CONSISTENCY THE_ROOT_PATH_NAME THE_BEING_CHECKED_PATH_NAME THE_VAR_TYPE THE_MESSAGE_OF_BEING_CHECKED_PATH)
+  
+  set (THE_ROOT_PATH "${${THE_ROOT_PATH_NAME}}")
+  set (THE_BEING_CHECKED_PATH "${${THE_BEING_CHECKED_PATH_NAME}}")
+
+  if (THE_BEING_CHECKED_PATH OR EXISTS "${THE_BEING_CHECKED_PATH}")
+    get_filename_component (THE_ROOT_PATH_ABS "${THE_ROOT_PATH}" ABSOLUTE)
+    get_filename_component (THE_BEING_CHECKED_PATH_ABS "${THE_BEING_CHECKED_PATH}" ABSOLUTE)
+
+    string (REGEX MATCH "${THE_ROOT_PATH_ABS}" DOES_PATH_CONTAIN "${THE_BEING_CHECKED_PATH_ABS}")
+
+    if (NOT DOES_PATH_CONTAIN) # if cmake found the being checked path at different place from THE_ROOT_PATH_ABS
+      set (${THE_BEING_CHECKED_PATH_NAME} "" CACHE ${THE_VAR_TYPE} "${THE_MESSAGE_OF_BEING_CHECKED_PATH}" FORCE)
+    endif()
+  else()
+    set (${THE_BEING_CHECKED_PATH_NAME} "" CACHE ${THE_VAR_TYPE} "${THE_MESSAGE_OF_BEING_CHECKED_PATH}" FORCE)
+  endif()
+
+endmacro()

adm/cmake/occt_toolkit.cmake

@@ -1,128 +1,138 @@
 # script for each OCCT toolkit
 
+# parce PACKAGES file
+if ("${PROJECT_NAME}" STREQUAL DRAWEXE)
+  set (USED_PACKAGES DRAWEXE)
+else()
+  FILE_TO_LIST ("src/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+endif()
+
+set (PRECOMPILED_DEFS)
+
 # Get all used packages from toolkit
-foreach (OCCT_PACKAGE ${TOOLKIT_MODULES})
-  if (WIN32)
-    list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
-  endif()
-  # ${OCCT_SOURCE_DIR}/src/${OCCT_PACKAGE}
-
-  set (SOURCE_FILES)
-  set (HEADER_FILES)
-
-  # Generate Flex and Bison files
-  if (${REBUILD_PLATFORM_DEPENDENT_CODE})
-
-    # flex files
-    OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
-    list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
-    list (SORT SOURCE_FILES_FLEX)
-
-    # bison files
-    OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
-    list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
-    list (SORT SOURCE_FILES_BISON)
-
-    if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
-
-      math (EXPR SOURCE_FILES_FLEX_LEN "${SOURCE_FILES_FLEX_LEN} - 1")
-      foreach (FLEX_FILE_INDEX RANGE ${SOURCE_FILES_FLEX_LEN})
-
-        list (GET SOURCE_FILES_FLEX ${FLEX_FILE_INDEX} CURRENT_FLEX_FILE)
-        get_filename_component (CURRENT_FLEX_FILE_NAME ${CURRENT_FLEX_FILE} NAME_WE)
-
-        list (GET SOURCE_FILES_BISON ${FLEX_FILE_INDEX} CURRENT_BISON_FILE)
-        get_filename_component (CURRENT_BISON_FILE_NAME ${CURRENT_BISON_FILE} NAME_WE)
-        
-        string (COMPARE EQUAL ${CURRENT_FLEX_FILE_NAME} ${CURRENT_BISON_FILE_NAME} ARE_FILES_EQUAL)
-
-        if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
-          set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
-          set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
-          BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMP_DIR}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
-          FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMP_DIR}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
-          ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
-
-          list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
-        endif()
-      endforeach()
-    endif()
-  endif()
-
-  # header files
-  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/FILES")
-    file (STRINGS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
-    file (STRINGS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
-    file (STRINGS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
-
-    file (STRINGS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
-    if(APPLE)
-      file (STRINGS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
-    endif()
-  else()
-    file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
-    file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
-    file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
-
-    file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
-    if(APPLE)
-      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
-    endif()
-  endif()
+foreach (OCCT_PACKAGE ${USED_PACKAGES})
   
-  list (APPEND HEADER_FILES ${HEADER_FILES_M} ${HEADER_FILES_LXX} ${SOURCE_FILES_GXX})
-  list (APPEND SOURCE_FILES ${SOURCE_FILES_C})
-  if(APPLE)
-    list (APPEND SOURCE_FILES ${SOURCE_FILES_M})
+  # TKService contains platform-dependent packages: Xw and WNT
+  if ((WIN32 AND "${OCCT_PACKAGE}" STREQUAL "Xw") OR (NOT WIN32 AND "${OCCT_PACKAGE}" STREQUAL "WNT"))
+    # do nothing
+  else()
+
+    if (WIN32)
+      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
+    endif()
+
+    set (SOURCE_FILES)
+    set (HEADER_FILES)
+
+    # Generate Flex and Bison files
+    if (${BUILD_YACCLEX})
+
+      # flex files
+      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
+      list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
+
+      # bison files
+      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
+      list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
+
+      if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
+      
+        list (SORT SOURCE_FILES_FLEX)
+        list (SORT SOURCE_FILES_BISON)
+
+        math (EXPR SOURCE_FILES_FLEX_LEN "${SOURCE_FILES_FLEX_LEN} - 1")
+        foreach (FLEX_FILE_INDEX RANGE ${SOURCE_FILES_FLEX_LEN})
+
+          list (GET SOURCE_FILES_FLEX ${FLEX_FILE_INDEX} CURRENT_FLEX_FILE)
+          get_filename_component (CURRENT_FLEX_FILE_NAME ${CURRENT_FLEX_FILE} NAME_WE)
+
+          list (GET SOURCE_FILES_BISON ${FLEX_FILE_INDEX} CURRENT_BISON_FILE)
+          get_filename_component (CURRENT_BISON_FILE_NAME ${CURRENT_BISON_FILE} NAME_WE)
+          
+          string (COMPARE EQUAL ${CURRENT_FLEX_FILE_NAME} ${CURRENT_BISON_FILE_NAME} ARE_FILES_EQUAL)
+
+          if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
+            set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
+            set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
+            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
+            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
+            ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
+           
+            list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
+          endif()
+        endforeach()
+      endif()
+    endif()
+
+    # header files
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
+
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+      if(APPLE)
+        file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
+      endif()
+    else()
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
+
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
+      if(APPLE)
+        file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
+      endif()
+    endif()
+    
+    list (APPEND HEADER_FILES ${HEADER_FILES_M} ${HEADER_FILES_LXX} ${SOURCE_FILES_GXX})
+    list (APPEND SOURCE_FILES ${SOURCE_FILES_C})
+    if(APPLE)
+      list (APPEND SOURCE_FILES ${SOURCE_FILES_M})
+    endif()
+
+    foreach(HEADER_FILE ${HEADER_FILES})
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+      else()
+        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+      endif()
+    endforeach()
+
+    foreach(SOURCE_FILE ${SOURCE_FILES})
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      else()
+        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      endif()
+    endforeach()
   endif()
-
-  foreach(HEADER_FILE ${HEADER_FILES})
-    if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-      message (STATUS "Info. consider patched file: ${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-      list (APPEND USED_INCFILES "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-      SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-    else()
-      list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-      SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
-    endif()
-  endforeach()
-
-  foreach(SOURCE_FILE ${SOURCE_FILES})
-    if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      message (STATUS "Info. consider patched file: ${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      list (APPEND USED_SRCFILES "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${APPLY_OCCT_PATCH_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-    else()
-      list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-      SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
-    endif()
-  endforeach()
 endforeach()
 string (REGEX REPLACE ";" " " PRECOMPILED_DEFS "${PRECOMPILED_DEFS}")
 
-# Get from toolkits EXTERNLIB all used libs
-OCCT_TOOLKIT_DEP (${PROJECT_NAME} ${PROJECT_NAME}_DEPS)
-foreach (PROJECT_DEP ${${PROJECT_NAME}_DEPS})
-  IS_OCCT_TOOLKIT (${PROJECT_DEP} OCCT_MODULES FOUND_TOOLKIT)
-  if ("${FOUND_TOOLKIT}" STREQUAL "ON")
-    list (APPEND USED_LIBS "${PROJECT_DEP}")
+set (USED_RCFILE "")
+if (MSVC)
+  set (USED_RCFILE "${CMAKE_BINARY_DIR}/resources/${PROJECT_NAME}.rc")
+
+  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in")
+    configure_file("${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
+  else()
+    configure_file("${CMAKE_SOURCE_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
   endif()
-endforeach()
+endif()
 
-# Create project for toolkit
-list (FIND BUILD_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
-if ("${BUILD_TOOLKITS}" STREQUAL "" OR NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
-
-  foreach (OCCT_MODULE ${OCCT_MODULES})
-    list (FIND ${OCCT_MODULE}_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
-    if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
-      set (CURRENT_MODULE ${OCCT_MODULE})
-    endif()
-  endforeach()
-  
-  if ("${PROJECT_NAME}" STREQUAL "DRAWEXE")
-    add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES})
+if ("${PROJECT_NAME}" STREQUAL "DRAWEXE")
+  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})
 
+  if (DEFINED INSTALL_BIN_DIR)
+    install (TARGETS ${PROJECT_NAME} DESTINATION "${INSTALL_BIN_DIR}")
+  else()
     install (TARGETS ${PROJECT_NAME}
              CONFIGURATIONS Release
              DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
@@ -132,9 +142,16 @@ if ("${BUILD_TOOLKITS}" STREQUAL "" OR NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
     install (TARGETS ${PROJECT_NAME}
              CONFIGURATIONS Debug
              DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
-  else()
-    add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES})
+  endif()
+else()
+  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})
 
+  if (DEFINED INSTALL_LIB_DIR)
+    install (TARGETS ${PROJECT_NAME}
+             RUNTIME DESTINATION "${INSTALL_BIN_DIR}"
+             ARCHIVE DESTINATION "${INSTALL_LIB_DIR}"
+             LIBRARY DESTINATION "${INSTALL_LIB_DIR}") 
+  else()
     install (TARGETS ${PROJECT_NAME}
              CONFIGURATIONS Release
              RUNTIME DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin"
@@ -150,14 +167,72 @@ if ("${BUILD_TOOLKITS}" STREQUAL "" OR NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
              RUNTIME DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind"
              ARCHIVE DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
              LIBRARY DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd")
+
     if (MSVC)
       install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind/${PROJECT_NAME}.pdb
                CONFIGURATIONS Debug
                DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
     endif()
   endif()
+endif()
 
-  set_property (TARGET ${PROJECT_NAME} PROPERTY FOLDER "Modules/${CURRENT_MODULE}")
-  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}")
-  target_link_libraries (${PROJECT_NAME} ${USED_LIBS})
-endif()
+set (CURRENT_MODULE)
+foreach (OCCT_MODULE ${OCCT_MODULES})
+  list (FIND ${OCCT_MODULE}_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
+  if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
+    set (CURRENT_MODULE ${OCCT_MODULE})
+  endif()
+endforeach()
+
+if (CURRENT_MODULE)
+  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "Modules/${CURRENT_MODULE}")
+endif()
+
+get_property (OCC_VERSION_MAJOR GLOBAL PROPERTY OCC_VERSION_MAJOR)
+get_property (OCC_VERSION_MINOR GLOBAL PROPERTY OCC_VERSION_MINOR)
+get_property (OCC_VERSION_MAINTENANCE GLOBAL PROPERTY OCC_VERSION_MAINTENANCE)
+
+set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}"
+                                                  SOVERSION     "${OCC_VERSION_MAJOR}"
+                                                  VERSION       "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}.${OCC_VERSION_MAINTENANCE}")               
+
+set (USED_TOOLKITS_BY_CURRENT_PROJECT)
+set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)
+
+# parce EXTERNLIB file
+FILE_TO_LIST ("src/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
+foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
+  string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
+  if (NOT COMMENT_FOUND)
+    string (REGEX MATCH "^TK" TK_FOUND ${USED_ITEM})
+    string (REGEX MATCH "^vtk" VTK_FOUND ${USED_ITEM})
+    
+    if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
+      list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
+    else()
+      string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
+      if ("${CSF_FOUND}" STREQUAL "")
+        message (STATUS "Info: ${USED_ITEM} from ${PROJECT_NAME} skipped due to it is empty")
+      else() # get CSF_ value
+        set (CURRENT_CSF ${${USED_ITEM}})
+        if (NOT "${CURRENT_CSF}" STREQUAL "")
+          # prepare a list from a string with whitespaces
+          separate_arguments (CURRENT_CSF)
+          list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT ${CURRENT_CSF})
+        endif()
+      endif()
+    endif()
+  endif()
+endforeach()
+
+if (APPLE)
+  list (FIND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT X11 IS_X11_FOUND)
+  if (NOT ${IS_X11_FOUND} EQUAL -1)
+    find_package (X11 COMPONENTS X11 Xext Xmu Xi)
+    if (NOT X11_FOUND)
+      message (STATUS "Warning: X11 is not found. It's required to install The XQuartz project: http://www.xquartz.org")
+    endif()
+  endif()
+endif()
+
+target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})

adm/cmake/tbb.cmake

@@ -9,55 +9,6 @@ if (NOT DEFINED 3RDPARTY_TBB_DIR)
   set (3RDPARTY_TBB_DIR "" CACHE PATH "The directory containing tbb")
 endif()
 
-# tbb include directory
-if (NOT DEFINED 3RDPARTY_TBB_INCLUDE_DIR)
-  set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE FILEPATH "The directory containing headers of the tbb")
-endif()
-
-# tbb library file (with absolute path)
-if (NOT DEFINED 3RDPARTY_TBB_LIBRARY OR NOT 3RDPARTY_TBB_LIBRARY_DIR)
-  set (3RDPARTY_TBB_LIBRARY "" CACHE FILEPATH "tbb library" FORCE)
-endif()
-
-# tbb library directory
-if (NOT DEFINED 3RDPARTY_TBB_LIBRARY_DIR)
-  set (3RDPARTY_TBB_LIBRARY_DIR "" CACHE FILEPATH "The directory containing tbb library")
-endif()
-
-# tbb malloc library file (with absolute path)
-if (NOT DEFINED 3RDPARTY_TBBMALLOC_LIBRARY OR NOT 3RDPARTY_TBBMALLOC_LIBRARY_DIR)
-  set (3RDPARTY_TBBMALLOC_LIBRARY "" CACHE FILEPATH "tbb malloc library" FORCE)
-endif()
-
-# tbb malloc library directory
-if (NOT DEFINED 3RDPARTY_TBBMALLOC_LIBRARY_DIR)
-  set (3RDPARTY_TBBMALLOC_LIBRARY_DIR "" CACHE FILEPATH "The directory containing tbb malloc library")
-endif()
-
-# tbb shared library (with absolute path)
-if (WIN32)
-  if (NOT DEFINED 3RDPARTY_TBB_DLL OR NOT 3RDPARTY_TBB_DLL_DIR)
-    set (3RDPARTY_TBB_DLL "" CACHE FILEPATH "tbb shared library" FORCE)
-  endif()
-endif()
-
-# tbb shared library directory
-if (WIN32 AND NOT DEFINED 3RDPARTY_TBB_DLL_DIR)
-  set (3RDPARTY_TBB_DLL_DIR "" CACHE FILEPATH "The directory containing tbb shared library")
-endif()
-
-# tbb malloc shared library (with absolute path)
-if (WIN32)
-  if (NOT DEFINED 3RDPARTY_TBBMALLOC_DLL OR NOT 3RDPARTY_TBBMALLOC_DLL_DIR)
-    set (3RDPARTY_TBBMALLOC_DLL "" CACHE FILEPATH "tbb malloc shared library" FORCE)
-  endif()
-endif()
-
-# tbb malloc shared library directory
-if (WIN32 AND NOT DEFINED 3RDPARTY_TBBMALLOC_DLL_DIR)
-  set (3RDPARTY_TBBMALLOC_DLL_DIR "" CACHE FILEPATH "The directory containing tbb malloc shared library")
-endif()
-
 if (MSVC)
   add_definitions (-D__TBB_NO_IMPLICIT_LINKAGE)
   add_definitions (-D__TBBMALLOC_NO_IMPLICIT_LINKAGE)
@@ -66,184 +17,270 @@ endif()
 # include occt macros. compiler_bitness, os_wiht_bit, compiler
 OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
 
-# search for product directory inside 3RDPARTY_DIR directory
-if (NOT 3RDPARTY_TBB_DIR AND 3RDPARTY_DIR)
-  FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" "TBB" TBB_DIR_NAME)
-  if (TBB_DIR_NAME)
-    message (STATUS "Info: TBB: ${TBB_DIR_NAME} folder is used")
-    set (3RDPARTY_TBB_DIR "${3RDPARTY_DIR}/${TBB_DIR_NAME}" CACHE PATH "The directory containing tbb" FORCE)
+# specify TBB folder in connectin with 3RDPARTY_DIR
+if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
+  #CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_DIR 3RDPARTY_TBB_DIR PATH "The directory containing tbb")
+
+  if (NOT 3RDPARTY_TBB_DIR OR NOT EXISTS "${3RDPARTY_TBB_DIR}")
+    FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" TBB TBB_DIR_NAME)
+    if (TBB_DIR_NAME)
+      set (3RDPARTY_TBB_DIR "${3RDPARTY_DIR}/${TBB_DIR_NAME}" CACHE PATH "The directory containing tbb" FORCE)
+    endif()
   endif()
-endif()
-
-OCCT_MAKE_COMPILER_BITNESS()
-
-if (${COMPILER_BITNESS} STREQUAL 32)
-  set (TBB_ARCH_NAME ia32)
 else()
-  set (TBB_ARCH_NAME intel64)
+  #set (3RDPARTY_TBB_DIR "" CACHE PATH "The directory containing TBB" FORCE)
 endif()
 
-# search for include directory in defined 3rdparty directory
+if (NOT DEFINED 3RDPARTY_TBB_INCLUDE_DIR)
+  set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE PATH "The directory containing headers of the TBB")
+endif()
+
+if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
+    # check 3RDPARTY_TBB_INCLUDE_DIR for consictency with specified 3RDPARTY_TBB_DIR
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_TBB_INCLUDE_DIR PATH "The directory containing headers of the TBB")
+endif()
+
+# tbb.h
 if (NOT 3RDPARTY_TBB_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_TBB_INCLUDE_DIR}")
-  set (3RDPARTY_TBB_INCLUDE_DIR "3RDPARTY_TBB_INCLUDE_DIR-NOTFOUND" CACHE FILEPATH "The directory containing the headers of tbb" FORCE)
-  find_path (3RDPARTY_TBB_INCLUDE_DIR tbb/tbb.h PATHS "${3RDPARTY_TBB_DIR}/include" NO_DEFAULT_PATH)
-  find_path (3RDPARTY_TBB_INCLUDE_DIR tbb/tbb.h PATHS "${3RDPARTY_TBB_DIR}/include")
+
+  set (HEADER_NAMES tbb.h tbb/tbb.h)
+
+  # set 3RDPARTY_TBB_INCLUDE_DIR as notfound, otherwise find_library can't assign a new value to 3RDPARTY_TBB_INCLUDE_DIR
+  set (3RDPARTY_TBB_INCLUDE_DIR "3RDPARTY_TBB_INCLUDE_DIR-NOTFOUND" CACHE PATH "the path to tbb.h" FORCE)
+
+  if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
+    find_path (3RDPARTY_TBB_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                              PATHS ${3RDPARTY_TBB_DIR}
+                                              PATH_SUFFIXES include
+                                              CMAKE_FIND_ROOT_PATH_BOTH
+                                              NO_DEFAULT_PATH)
+  else()
+    find_path (3RDPARTY_TBB_INCLUDE_DIR NAMES ${HEADER_NAMES}
+                                              PATH_SUFFIXES include
+                                              CMAKE_FIND_ROOT_PATH_BOTH)
+  endif()
 endif()
 
-if (NOT 3RDPARTY_TBB_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_TBB_INCLUDE_DIR}")
-  set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE FILEPATH "The directory containing the headers of tbb" FORCE)
-endif()
-
-OCCT_MAKE_COMPILER_SHORT_NAME()
-
-# TBB_COMPILER_FOLER
-#if (WIN32)
-  set (TBB_COMPILER_FOLER ${COMPILER})
-#else()
-#  set (TBB_COMPILER_FOLER ${COMPILER})
-#endif()
-
-# search for tbb and tbb malloc library in defined 3rdparty directory
-foreach (LIBRARY_NAME TBB TBBMALLOC)
-  if (NOT WIN32)
-    file (GLOB TBB_SUBDIRS RELATIVE ${3RDPARTY_TBB_DIR}/lib/${TBB_ARCH_NAME}/ ${3RDPARTY_TBB_DIR}/lib/${TBB_ARCH_NAME}/*)
-    list (SORT TBB_SUBDIRS)
-    list (REVERSE TBB_SUBDIRS)
-    list (LENGTH TBB_SUBDIRS TBB_SUBDIRS_LENGTH)
-    set (TBB_SUBDIR_FIRST "")
-    if (${TBB_SUBDIRS_LENGTH})
-      list (GET TBB_SUBDIRS 0 TBB_SUBDIR_FIRST)
-      set (3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR "${3RDPARTY_TBB_DIR}/lib/${TBB_ARCH_NAME}/${TBB_SUBDIR_FIRST}")
-    endif()
-  endif()
-  if (NOT 3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR)
-    set (3RDPARTY_${LIBRARY_NAME}_LIBRARY "" CACHE FILEPATH "${LIBRARY_NAME} library" FORCE)
-  elseif (3RDPARTY_${LIBRARY_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${LIBRARY_NAME}_LIBRARY}")
-    get_filename_component(3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR_TMP "${3RDPARTY_${LIBRARY_NAME}_LIBRARY}" PATH)
-    if (NOT "${3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR}" STREQUAL "${3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR_TMP}")
-      set (3RDPARTY_${LIBRARY_NAME}_LIBRARY "" CACHE FILEPATH "${LIBRARY_NAME} library" FORCE)
-    endif()
-  endif()
-
-  if (NOT 3RDPARTY_${LIBRARY_NAME}_LIBRARY OR NOT EXISTS "${3RDPARTY_${LIBRARY_NAME}_LIBRARY}")
-    set (3RDPARTY_${LIBRARY_NAME}_LIBRARY "3RDPARTY_${LIBRARY_NAME}_LIBRARY-NOTFOUND" CACHE FILEPATH "Path to library of ${LIBRARY_NAME}" FORCE)
-
-    string (TOLOWER "${LIBRARY_NAME}" lower_LIBRARY_NAME)
-    find_library (3RDPARTY_${LIBRARY_NAME}_LIBRARY ${lower_LIBRARY_NAME} PATHS
-                                                                         "${3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR}"
-                                                                         "${3RDPARTY_TBB_DIR}/lib/${TBB_ARCH_NAME}/${TBB_COMPILER_FOLER}"
-                                                                         NO_DEFAULT_PATH)
-
-      # second search if previous one do not find anything
-      find_library (3RDPARTY_${LIBRARY_NAME}_LIBRARY ${LIBRARY_NAME})
-  endif()
-
-  if (NOT 3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR}")
-    get_filename_component(3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR "${3RDPARTY_${LIBRARY_NAME}_LIBRARY}" PATH)
-  endif()
-  set (3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR "${3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR}" CACHE FILEPATH "The directory containing ${LIBRARY_NAME} library" FORCE)
-
-  # search for dll in defined 3rdparty directory (just for win case)
-  if (WIN32)
-    set (CMAKE_FIND_LIBRARY_SUFFIXES ".lib" ".dll")
-
-    if (NOT 3RDPARTY_${LIBRARY_NAME}_DLL_DIR)
-      set (3RDPARTY_${LIBRARY_NAME}_DLL "" CACHE FILEPATH "${LIBRARY_NAME} shared library" FORCE)
-    elseif (3RDPARTY_${LIBRARY_NAME}_DLL AND EXISTS "${3RDPARTY_${LIBRARY_NAME}_DLL}")
-      get_filename_component(3RDPARTY_${LIBRARY_NAME}_DLL_DIR_TMP "${3RDPARTY_${LIBRARY_NAME}_DLL}" PATH)
-      if (NOT "${3RDPARTY_${LIBRARY_NAME}_DLL_DIR}" STREQUAL "${3RDPARTY_${LIBRARY_NAME}_DLL_DIR_TMP}")
-        set (3RDPARTY_${LIBRARY_NAME}_DLL "" CACHE FILEPATH "${LIBRARY_NAME} shared library" FORCE)
-      endif()
-    endif()
-
-    if (NOT 3RDPARTY_${LIBRARY_NAME}_DLL OR NOT EXISTS "${3RDPARTY_${LIBRARY_NAME}_DLL}")
-      set (3RDPARTY_${LIBRARY_NAME}_DLL "3RDPARTY_${LIBRARY_NAME}_DLL-NOTFOUND" CACHE FILEPATH "Path to shared library of ${LIBRARY_NAME}" FORCE)
-
-      find_library (3RDPARTY_${LIBRARY_NAME}_DLL ${LIBRARY_NAME} PATHS
-                                                                 "${3RDPARTY_${LIBRARY_NAME}_DLL_DIR}"
-                                                                 "${3RDPARTY_TBB_DIR}/bin/${TBB_ARCH_NAME}/${TBB_COMPILER_FOLER}"
-                                                                 NO_DEFAULT_PATH)
-
-        # second search if previous one do not find anything
-        find_library (3RDPARTY_${LIBRARY_NAME}_DLL ${LIBRARY_NAME})
-    endif()
-
-    if (NOT 3RDPARTY_${LIBRARY_NAME}_DLL_DIR OR NOT EXISTS "${3RDPARTY_${LIBRARY_NAME}_DLL_DIR}")
-      get_filename_component(3RDPARTY_${LIBRARY_NAME}_DLL_DIR "${3RDPARTY_${LIBRARY_NAME}_DLL}" PATH)
-      set (3RDPARTY_${LIBRARY_NAME}_DLL_DIR "${3RDPARTY_${LIBRARY_NAME}_DLL_DIR}" CACHE FILEPATH "The directory containing ${LIBRARY_NAME} shared library" FORCE)
-    endif()
-  endif() # end dll search
-endforeach() # end tbb / tbbmalloc
-
-# include found paths to common variables
 if (3RDPARTY_TBB_INCLUDE_DIR AND EXISTS "${3RDPARTY_TBB_INCLUDE_DIR}")
   list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_TBB_INCLUDE_DIR}")
 else()
   list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TBB_INCLUDE_DIR)
+
+  set (3RDPARTY_TBB_INCLUDE_DIR "" CACHE PATH "the path to tbb.h" FORCE)
 endif()
 
-foreach (LIBRARY_NAME TBB TBBMALLOC)
-  if (3RDPARTY_${LIBRARY_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${LIBRARY_NAME}_LIBRARY}")
-    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR}")
-  else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${LIBRARY_NAME}_LIBRARY_DIR)
+# common steps for tbb and tbbmalloc
+macro (TBB_PRODUCT_SEARCH PRODUCT_NAME)
+
+  string (TOLOWER ${PRODUCT_NAME} lower_PRODUCT_NAME)
+
+  # define required tbb/tbbmalloc variables
+  if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_LIBRARY OR NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}")
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "" CACHE FILEPATH "${PRODUCT_NAME} library" FORCE)
+  endif()
+
+  if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR)
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME} library")
   endif()
 
   if (WIN32)
-    if (3RDPARTY_${LIBRARY_NAME}_DLL OR EXISTS "${3RDPARTY_${LIBRARY_NAME}_DLL}")
-      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${LIBRARY_NAME}_DLL_DIR}")
-    else()
-      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${LIBRARY_NAME}_DLL_DIR)
+    if (NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_DLL OR NOT 3RDPARTY_${PRODUCT_NAME}_DLL_DIR OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}")
+      set (3RDPARTY_${PRODUCT_NAME}_DLL "" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
     endif()
   endif()
-endforeach()
 
-# install tbb
-if (INSTALL_TBB)
-  OCCT_MAKE_OS_WITH_BITNESS()
-  OCCT_MAKE_COMPILER_SHORT_NAME()
-
-  if (WIN32)
-    install (FILES ${3RDPARTY_TBB_DLL} ${3RDPARTY_TBBMALLOC_DLL}
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-    install (FILES ${3RDPARTY_TBB_DLL} ${3RDPARTY_TBBMALLOC_DLL}
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-    install (FILES ${3RDPARTY_TBB_DLL} ${3RDPARTY_TBBMALLOC_DLL}
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
-  else()
-    get_filename_component(TBBLIB ${3RDPARTY_TBB_LIBRARY} NAME)
-    get_filename_component(TBBMALLOCLIB ${3RDPARTY_TBBMALLOC_LIBRARY} NAME)
-
-    install (FILES ${3RDPARTY_TBB_LIBRARY}.2
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-             RENAME ${TBBLIB}.2)
-    install (FILES ${3RDPARTY_TBB_LIBRARY}.2
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-             RENAME ${TBBLIB}.2)
-    install (FILES ${3RDPARTY_TBB_LIBRARY}.2
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-             RENAME ${TBBLIB}.2)
-
-    install (FILES ${3RDPARTY_TBBMALLOC_LIBRARY}.2
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-             RENAME ${TBBMALLOCLIB}.2)
-    install (FILES ${3RDPARTY_TBBMALLOC_LIBRARY}.2
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-             RENAME ${TBBMALLOCLIB}.2)
-    install (FILES ${3RDPARTY_TBBMALLOC_LIBRARY}.2
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-             RENAME ${TBBMALLOCLIB}.2)
+  if (WIN32 AND NOT DEFINED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR)
+    set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME} shared library")
   endif()
 
+  # check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_TBB_DIR
+  if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${PRODUCT_NAME}_LIBRARY FILEPATH "the path to ${PRODUCT_NAME} library")
+
+    if (3RDPARTY_${PRODUCT_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
+      get_filename_component (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}" PATH)
+      set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+    else()
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR PATH "The directory containing ${PRODUCT_NAME} library")
+    endif()
+
+    if (WIN32)
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${PRODUCT_NAME}_DLL FILEPATH "the path to ${PRODUCT_NAME} shared library")
+
+      if (3RDPARTY_${PRODUCT_NAME}_DLL AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
+        get_filename_component (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL}" PATH)
+        set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} shared library" FORCE)
+      else()
+
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_TBB_DIR 3RDPARTY_${PRODUCT_NAME}_DLL_DIR PATH "The directory containing ${PRODUCT_NAME} shared library")
+      endif()
+    endif()
+  endif()
+
+  OCCT_MAKE_COMPILER_SHORT_NAME()
+  OCCT_MAKE_COMPILER_BITNESS()
+
+  if (${COMPILER_BITNESS} EQUAL 32)
+    set (${PRODUCT_NAME}_ARCH_NAME ia32)
+  else()
+    set (${PRODUCT_NAME}_ARCH_NAME intel64)
+  endif()
+
+  # tbb/tbbmalloc library
+  if (NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
+    
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib)
+    set (PRODUCT_PATH_SUFFIXES lib ${lower_PRODUCT_NAME})
+
+    # set 3RDPARTY_${PRODUCT_NAME}_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_LIBRARY
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "3RDPARTY_${PRODUCT_NAME}_LIBRARY-NOTFOUND" CACHE FILEPATH "The path to ${PRODUCT_NAME} library" FORCE)
+
+    if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
+      if (NOT EXISTS "${3RDPARTY_TBB_DIR}/lib/${${PRODUCT_NAME}_ARCH_NAME}/${COMPILER}")
+        if (EXISTS "${3RDPARTY_TBB_DIR}/lib/${${PRODUCT_NAME}_ARCH_NAME}")
+          file (GLOB ${PRODUCT_NAME}_COMPILER_LIST "${3RDPARTY_TBB_DIR}/lib/${${PRODUCT_NAME}_ARCH_NAME}/*")
+          if (${PRODUCT_NAME}_COMPILER_LIST)
+            list (GET ${PRODUCT_NAME}_COMPILER_LIST -1 THE_MOST_FRESH_COMPILER_VERSION)
+            if (THE_MOST_FRESH_COMPILER_VERSION)
+              get_filename_component (THE_MOST_FRESH_COMPILER_VERSION_NAME "${THE_MOST_FRESH_COMPILER_VERSION}" NAME)
+              set (PRODUCT_PATH_SUFFIXES lib ${lower_PRODUCT_NAME} lib/${${PRODUCT_NAME}_ARCH_NAME}/${THE_MOST_FRESH_COMPILER_VERSION_NAME})
+            endif()
+          endif()
+        endif()
+      else()
+        set (PRODUCT_PATH_SUFFIXES lib ${lower_PRODUCT_NAME} lib/${${PRODUCT_NAME}_ARCH_NAME}/${COMPILER})
+      endif()
+
+      find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY ${lower_PRODUCT_NAME}
+                                         PATHS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" "${3RDPARTY_TBB_DIR}"
+                                         PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES}
+                                         CMAKE_FIND_ROOT_PATH_BOTH
+                                         NO_DEFAULT_PATH)
+    else()
+      find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY ${lower_PRODUCT_NAME} 
+                                         PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES}
+                                         CMAKE_FIND_ROOT_PATH_BOTH)
+    endif()
+
+    if (3RDPARTY_${PRODUCT_NAME}_LIBRARY AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}")
+      get_filename_component (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY}" PATH)
+      set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+    else()
+      set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+    endif()
+  endif()
+
+  if (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}")
+    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR}")
+  else()
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR)
+
+    set (3RDPARTY_${PRODUCT_NAME}_LIBRARY "" CACHE FILEPATH "The path to ${PRODUCT_NAME} library" FORCE)
+  endif()
+
+  # tbb/tbbmalloc shared library
+  if (WIN32)
+    if (NOT 3RDPARTY_${PRODUCT_NAME}_DLL OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
+      set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
+      set (PRODUCT_PATH_SUFFIXES bin)
+
+      # set 3RDPARTY_${PRODUCT_NAME}_DLL as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_DLL
+      set (3RDPARTY_${PRODUCT_NAME}_DLL "3RDPARTY_${PRODUCT_NAME}_DLL-NOTFOUND" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
+
+      if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
+        if (NOT EXISTS "${3RDPARTY_TBB_DIR}/bin/${${PRODUCT_NAME}_ARCH_NAME}/${COMPILER}")
+          if (EXISTS "${3RDPARTY_TBB_DIR}/bin/${${PRODUCT_NAME}_ARCH_NAME}")
+            file (GLOB ${PRODUCT_NAME}_COMPILER_LIST "${3RDPARTY_TBB_DIR}/bin/${${PRODUCT_NAME}_ARCH_NAME}/*")
+            if (${PRODUCT_NAME}_COMPILER_LIST)
+              list (GET ${PRODUCT_NAME}_COMPILER_LIST -1 THE_MOST_FRESH_COMPILER_VERSION)
+              if (THE_MOST_FRESH_COMPILER_VERSION)
+                get_filename_component (THE_MOST_FRESH_COMPILER_VERSION_NAME "${THE_MOST_FRESH_COMPILER_VERSION}" NAME)
+                set (PRODUCT_PATH_SUFFIXES bin bin/${${PRODUCT_NAME}_ARCH_NAME}/${THE_MOST_FRESH_COMPILER_VERSION_NAME})
+              endif()
+            endif()
+          endif()
+        else()
+          set (PRODUCT_PATH_SUFFIXES bin bin/${${PRODUCT_NAME}_ARCH_NAME}/${COMPILER})
+        endif()
+
+        if (3RDPARTY_TBB_DIR AND EXISTS "${3RDPARTY_TBB_DIR}")
+          find_library (3RDPARTY_${PRODUCT_NAME}_DLL ${lower_PRODUCT_NAME}
+                                         PATHS "${3RDPARTY_TBB_DIR}"
+                                         PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES}
+                                         NO_DEFAULT_PATH)
+        else()
+          find_library (3RDPARTY_${PRODUCT_NAME}_DLL ${lower_PRODUCT_NAME} PATH_SUFFIXES ${PRODUCT_PATH_SUFFIXES})
+        endif()
+
+        if (3RDPARTY_${PRODUCT_NAME}_DLL AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL}")
+          get_filename_component (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL}" PATH)
+          set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}" CACHE PATH "The directory containing ${PRODUCT_NAME} library" FORCE)
+        else()
+          set (3RDPARTY_${PRODUCT_NAME}_DLL_DIR "" CACHE PATH "The directory containing ${PRODUCT_NAME} shared library" FORCE)
+
+          set (3RDPARTY_${PRODUCT_NAME}_DLL "" CACHE FILEPATH "${PRODUCT_NAME} shared library" FORCE)
+        endif()
+      endif()
+    endif()
+
+    if (3RDPARTY_${PRODUCT_NAME}_DLL_DIR OR EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}")
+      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR}")
+    else()
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR)
+    endif()
+  endif()
+
+  # install tbb/tbbmalloc
+  if (INSTALL_${PRODUCT_NAME})
+    OCCT_MAKE_OS_WITH_BITNESS()
+    OCCT_MAKE_COMPILER_SHORT_NAME()
+
+    if (WIN32)
+      if (DEFINED INSTALL_BIN_DIR)
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_DLL} DESTINATION "${INSTALL_BIN_DIR}")
+      else()
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_DLL}
+                 CONFIGURATIONS Release
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_DLL}
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_DLL}
+                 CONFIGURATIONS Debug
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+      endif()
+    else()
+      get_filename_component (PRODUCT_LIBRARY_NAME ${3RDPARTY_${PRODUCT_NAME}_LIBRARY} NAME)
+
+      if (DEFINED INSTALL_LIB_DIR)
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_LIBRARY}.2
+                 DESTINATION "${INSTALL_LIB_DIR}"
+                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
+      else()
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_LIBRARY}.2
+                 CONFIGURATIONS Release
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
+                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_LIBRARY}.2
+                 CONFIGURATIONS RelWithDebInfo
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
+                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
+        install (FILES ${3RDPARTY_${PRODUCT_NAME}_LIBRARY}.2
+                 CONFIGURATIONS Debug
+                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
+                 RENAME ${PRODUCT_LIBRARY_NAME}.2)
+      endif()
+    endif()
+  endif()
+  mark_as_advanced (3RDPARTY_${PRODUCT_NAME}_LIBRARY 3RDPARTY_${PRODUCT_NAME}_DLL)
+endmacro()
+
+
+TBB_PRODUCT_SEARCH (TBB)
+TBB_PRODUCT_SEARCH (TBBMALLOC)
+
+
+if (INSTALL_TBB)
   set (USED_3RDPARTY_TBB_DIR "")
 else()
   # the library directory for using by the executable
@@ -253,5 +290,3 @@ else()
     set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_LIBRARY_DIR})
   endif()
 endif()
-
-mark_as_advanced (3RDPARTY_TBB_LIBRARY 3RDPARTY_TBBMALLOC_LIBRARY 3RDPARTY_TBB_DLL 3RDPARTY_TBBMALLOC_DLL)

adm/cmake/tcl.cmake

@@ -77,7 +77,7 @@ endif()
 
 if (WIN32)
   if (NOT 3RDPARTY_TCL_DLL)
-    set (CMAKE_FIND_LIBRARY_SUFFIXES ".lib" ".dll")
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .dll)
 
     set (DLL_FOLDER_FOR_SEARCH "")
     if (3RDPARTY_TCL_DLL_DIR)
@@ -142,7 +142,7 @@ endif()
 
 if (WIN32)
   if (NOT 3RDPARTY_TCL_DLL)
-    set (CMAKE_FIND_LIBRARY_SUFFIXES ".lib" ".dll")
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .dll)
 
     set (DLL_FOLDER_FOR_SEARCH "")
     if (3RDPARTY_TCL_DLL_DIR)
@@ -203,32 +203,47 @@ if (INSTALL_TCL)
 
     # collect and install all dlls from tcl dll dirs
     file (GLOB TCL_DLLS "${3RDPARTY_TCL_DLL_DIR}/*.dll")
-    install (FILES ${TCL_DLLS}
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-    install (FILES ${TCL_DLLS}
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-    install (FILES ${TCL_DLLS}
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+
+    if (DEFINED INSTALL_BIN_DIR)
+      install (FILES ${TCL_DLLS} DESTINATION "${INSTALL_BIN_DIR}")
+    else()
+      install (FILES ${TCL_DLLS}
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
+      install (FILES ${TCL_DLLS}
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
+      install (FILES ${TCL_DLLS}
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+    endif()
   else()
     get_filename_component(3RDPARTY_TCL_LIBRARY_REALPATH ${3RDPARTY_TCL_LIBRARY} REALPATH)
-    install (FILES ${3RDPARTY_TCL_LIBRARY_REALPATH}
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
-    install (FILES ${3RDPARTY_TCL_LIBRARY_REALPATH}
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi")
-    install (FILES ${3RDPARTY_TCL_LIBRARY_REALPATH}
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd")
+
+    if (DEFINED INSTALL_LIB_DIR)
+      install (FILES ${3RDPARTY_TCL_LIBRARY_REALPATH} DESTINATION "${INSTALL_LIB_DIR}")
+    else()
+      install (FILES ${3RDPARTY_TCL_LIBRARY_REALPATH}
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
+      install (FILES ${3RDPARTY_TCL_LIBRARY_REALPATH}
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi")
+      install (FILES ${3RDPARTY_TCL_LIBRARY_REALPATH}
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd")
+    endif()
   endif()
 
   if (TCL_TCLSH_VERSION)
     # tcl is required to install in lib folder (without)
-    install (DIRECTORY "${3RDPARTY_TCL_LIBRARY_DIR}/tcl8"                    DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
-    install (DIRECTORY "${3RDPARTY_TCL_LIBRARY_DIR}/tcl${TCL_TCLSH_VERSION}" DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
+    if (DEFINED INSTALL_LIB_DIR)
+      install (DIRECTORY "${3RDPARTY_TCL_LIBRARY_DIR}/tcl8"                    DESTINATION "${INSTALL_LIB_DIR}")
+      install (DIRECTORY "${3RDPARTY_TCL_LIBRARY_DIR}/tcl${TCL_TCLSH_VERSION}" DESTINATION "${INSTALL_LIB_DIR}")
+    else()
+      install (DIRECTORY "${3RDPARTY_TCL_LIBRARY_DIR}/tcl8"                    DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
+      install (DIRECTORY "${3RDPARTY_TCL_LIBRARY_DIR}/tcl${TCL_TCLSH_VERSION}" DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
+    endif()
   else()
     message (STATUS "\nWarning: tclX.X subdir won't be copyied during the installation process.")
     message (STATUS "Try seeking tcl within another folder by changing 3RDPARTY_TCL_DIR variable.")
@@ -247,10 +262,15 @@ endif()
 mark_as_advanced (3RDPARTY_TCL_LIBRARY 3RDPARTY_TCL_DLL)
 
 if (TK_FOUND AND 3RDPARTY_TCL_DIR)
-  get_filename_component (3RDPARTY_TK_WISH_DIR "${TK_WISH}" PATH)
-  get_filename_component (3RDPARTY_TK_WISH_DIR_PARENT "${3RDPARTY_TK_WISH_DIR}" PATH)
-  if ("${3RDPARTY_TK_WISH_DIR_PARENT}" STREQUAL "${3RDPARTY_TCL_DIR}")
+
+  get_filename_component (TK_WISH_ABSOLUTE          "${TK_WISH}"          ABSOLUTE)
+  get_filename_component (3RDPARTY_TCL_DIR_ABSOLUTE "${3RDPARTY_TCL_DIR}" ABSOLUTE)
+
+  string (FIND "${TK_WISH_ABSOLUTE}" "${3RDPARTY_TCL_DIR_ABSOLUTE}" THE_SAME_FOLDER)
+
+  if (${THE_SAME_FOLDER} EQUAL 0)
     set (3RDPARTY_TCLTK_DIR "${3RDPARTY_TCL_DIR}")
+    message (STATUS "Info: TK is used from TCL folder: ${3RDPARTY_TCLTK_DIR}")
   endif()
 endif()
 

adm/cmake/tk.cmake

@@ -207,31 +207,45 @@ if (INSTALL_TK)
 
     # collect and install all dlls from tk dll dirs
     file (GLOB TK_DLLS  "${3RDPARTY_TK_DLL_DIR}/*.dll")
-    install (FILES ${TK_DLLS}
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-    install (FILES ${TK_DLLS}
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-    install (FILES ${TK_DLLS}
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+
+    if (DEFINED INSTALL_BIN_DIR)
+      install (FILES ${TK_DLLS} DESTINATION "${INSTALL_BIN_DIR}")
+    else()
+      install (FILES ${TK_DLLS}
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
+      install (FILES ${TK_DLLS}
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
+      install (FILES ${TK_DLLS}
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
+    endif()
   else()
     get_filename_component(3RDPARTY_TK_LIBRARY_REALPATH ${3RDPARTY_TK_LIBRARY} REALPATH)
-    install (FILES ${3RDPARTY_TK_LIBRARY_REALPATH}
-             CONFIGURATIONS Release
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
-    install (FILES ${3RDPARTY_TK_LIBRARY_REALPATH}
-             CONFIGURATIONS RelWithDebInfo
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi")
-    install (FILES ${3RDPARTY_TK_LIBRARY_REALPATH}
-             CONFIGURATIONS Debug
-             DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd")
+
+    if (DEFINED INSTALL_LIB_DIR)
+      install (FILES ${3RDPARTY_TK_LIBRARY_REALPATH} DESTINATION "${INSTALL_LIB_DIR}")
+    else()
+      install (FILES ${3RDPARTY_TK_LIBRARY_REALPATH}
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
+      install (FILES ${3RDPARTY_TK_LIBRARY_REALPATH}
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi")
+      install (FILES ${3RDPARTY_TK_LIBRARY_REALPATH}
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd")
+    endif()
   endif()
 
   if (TCL_TCLSH_VERSION)
     # tk is required to install in lib folder (without)
-    install (DIRECTORY "${3RDPARTY_TK_LIBRARY_DIR}/tk${TCL_TCLSH_VERSION}"  DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
+    if (DEFINED INSTALL_LIB_DIR)
+      install (DIRECTORY "${3RDPARTY_TK_LIBRARY_DIR}/tk${TCL_TCLSH_VERSION}"  DESTINATION "${INSTALL_LIB_DIR}")
+    else()
+      install (DIRECTORY "${3RDPARTY_TK_LIBRARY_DIR}/tk${TCL_TCLSH_VERSION}"  DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
+    endif()
   else()
     message (STATUS "\nWarning: tkX.X subdir won't be copyied during the installation process.")
     message (STATUS "Try seeking tk within another folder by changing 3RDPARTY_TK_DIR variable.")

adm/cmake/vardescr.cmake

@@ -1,7 +1,7 @@
 # variable description
 
 # 
-set (APPLY_OCCT_PATCH_DIR_DESCR 
+set (BUILD_PATCH_DESCR 
 "Points to the directory recognized as a 'patch' for OCCT. If specified,
 the files from this directory take precedence over the corresponding native
 OCCT sources. This way you are able to introduce patches to Open CASCADE
@@ -13,19 +13,19 @@ set (BUILD_LIBRARY_TYPE_DESCR
 are linked dynamically and loaded at runtime. 'Static' libraries
 are archives of object files for use when linking other targets")
 
-set (REBUILD_PLATFORM_DEPENDENT_CODE_DESCR 
+set (BUILD_YACCLEX_DESCR 
 "Enables Flex/Bison lexical analyzers. OCCT source files relating to STEP reader and
 ExprIntrp functionality are generated automatically with Flex/Bison. Checking this options
 leads to automatic search of Flex/Bison binaries and regeneration of the mentioned files")
 
-set (OCCT_ALGO_EXTENDED_OUTPUT_DESCR
+set (BUILD_WITH_DEBUG_DESCR
 "Enables extended messages of many OCCT algorithms, usually printed to cout. 
 These include messages on internal errors and special cases encountered, timing etc")
 
 # install variables
 set (INSTALL_DIR_DESCR 
-"The place where built OCCT libraries, headers, test cases (INSTALL_OCCT_TEST_CASES variable),
-samples (INSTALL_OCCT_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_GL2PS, INSTALL_TBB and
+"The place where built OCCT libraries, headers, test cases (INSTALL_TEST_CASES variable),
+samples (INSTALL_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_GL2PS, INSTALL_TBB and
 other similar variables) will be placed during the installation process (building INSTALL project)")
 
 macro (INSTALL_MESSAGE INSTALL_TARGET_VARIABLE INSTALL_TARGET_STRING)
@@ -34,8 +34,8 @@ set (${INSTALL_TARGET_VARIABLE}_DESCR
 project) into the installation directory (INSTALL_DIR variable)")
 endmacro()
 
-INSTALL_MESSAGE (INSTALL_OCCT_SAMPLES     "OCCT samples")
-INSTALL_MESSAGE (INSTALL_OCCT_TEST_CASES  "non-regression OCCT test scripts")
+INSTALL_MESSAGE (INSTALL_SAMPLES          "OCCT samples")
+INSTALL_MESSAGE (INSTALL_TEST_CASES       "non-regression OCCT test scripts")
 INSTALL_MESSAGE (INSTALL_DOC_OcctOverview "OCCT overview documentation (HTML format)")
 INSTALL_MESSAGE (INSTALL_FREEIMAGE        "FreeImage binaries")
 INSTALL_MESSAGE (INSTALL_FREEIMAGEPLUS    "FreeImagePlus binaries")
@@ -44,7 +44,7 @@ INSTALL_MESSAGE (INSTALL_GL2PS            "GL2PS binaries")
 INSTALL_MESSAGE (INSTALL_TBB              "TBB binaries")
 INSTALL_MESSAGE (INSTALL_TCL              "TCL binaries")
 INSTALL_MESSAGE (INSTALL_TK               "TK binaries")
-INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
+#INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
 
 # build variables
 macro (BUILD_MODULE_MESSAGE BUILD_MODULE_TARGET_VARIABLE BUILD_MODULE_TARGET_STRING)

adm/cmake/vtk.cmake

@@ -1,183 +1,197 @@
 # vtk
 
-if (NOT DEFINED INSTALL_VTK)
-  set (INSTALL_VTK OFF CACHE BOOL "${INSTALL_VTK_DESCR}")
-endif()
+#if (NOT DEFINED INSTALL_VTK)
+#  set (INSTALL_VTK OFF CACHE BOOL "${INSTALL_VTK_DESCR}")
+#endif()
 
 # vtk directory
 if (NOT DEFINED 3RDPARTY_VTK_DIR)
-  set (3RDPARTY_VTK_DIR "" CACHE PATH "The directory containing vtk")
+  set (3RDPARTY_VTK_DIR "" CACHE PATH "The directory containing VTK")
+endif()
+
+# include occt macros. compiler_bitness, os_wiht_bit, compiler
+OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
+
+# specify VTK folder in connectin with 3RDPARTY_DIR
+if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
+  #CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_DIR 3RDPARTY_VTK_DIR PATH "The directory containing VTK")
+
+  if (NOT 3RDPARTY_VTK_DIR OR NOT EXISTS "${3RDPARTY_VTK_DIR}")
+    FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" VTK VTK_DIR_NAME)
+    if (VTK_DIR_NAME)
+      set (3RDPARTY_VTK_DIR "${3RDPARTY_DIR}/${VTK_DIR_NAME}" CACHE PATH "The directory containing VTK" FORCE)
+    endif()
+  endif()
+else()
+  #set (3RDPARTY_VTK_DIR "" CACHE PATH "The directory containing VTK" FORCE)
 endif()
 
 # vtk include directory
 if (NOT DEFINED 3RDPARTY_VTK_INCLUDE_DIR)
-  set (3RDPARTY_VTK_INCLUDE_DIR "" CACHE FILEPATH "The directory containing headers of vtk")
+  set (3RDPARTY_VTK_INCLUDE_DIR "" CACHE PATH "The directory containing headers of VTK")
 endif()
 
 # vtk library directory
 if (NOT DEFINED 3RDPARTY_VTK_LIBRARY_DIR)
-  set (3RDPARTY_VTK_LIBRARY_DIR "" CACHE FILEPATH "The directory containing vtk library")
+  set (3RDPARTY_VTK_LIBRARY_DIR "" CACHE PATH "The directory containing VTK libraries")
 endif()
 
 # vtk dll directory
 if (WIN32 AND NOT DEFINED 3RDPARTY_VTK_DLL_DIR)
-  set (3RDPARTY_VTK_DLL_DIR "" CACHE FILEPATH "The directory containing VTK dll")
+  set (3RDPARTY_VTK_DLL_DIR "" CACHE PATH "The directory containing VTK shared libraries")
 endif()
 
-# search for vtk in user defined directory
-if (NOT 3RDPARTY_VTK_DIR AND 3RDPARTY_DIR)
-  FIND_PRODUCT_DIR("${3RDPARTY_DIR}" vtk VTK_DIR_NAME)
-  if (VTK_DIR_NAME)
-    set (3RDPARTY_VTK_DIR "${3RDPARTY_DIR}/${VTK_DIR_NAME}" CACHE PATH "The directory containing vtk product" FORCE)
+# check 3RDPARTY_VTK_ paths for consistency with specified 3RDPARTY_VTK_DIR
+if (3RDPARTY_VTK_DIR AND EXISTS "${3RDPARTY_VTK_DIR}")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_VTK_DIR 3RDPARTY_VTK_INCLUDE_DIR PATH "The directory containing headers of VTK")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_VTK_DIR 3RDPARTY_VTK_LIBRARY_DIR PATH "The directory containing VTK libraries")
+
+  if (WIN32)
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_VTK_DIR 3RDPARTY_VTK_DLL_DIR PATH "The directory containing VTK shared library")
   endif()
 endif()
 
-# find installed vtk
+if (3RDPARTY_VTK_DIR AND EXISTS "${3RDPARTY_VTK_DIR}")
+  set (CACHED_VTK_DIR $ENV{VTK_DIR})
+  set (ENV{VTK_DIR} "${3RDPARTY_VTK_DIR}")
+endif()
+
 find_package(VTK QUIET)
 
-# find native vtk
-if (NOT VTK_FOUND)
-  find_package(VTK QUIET PATHS "${3RDPARTY_VTK_DIR}")
-endif()
-
-if (NOT VTK_FOUND AND NOT 3RDPARTY_VTK_DIR OR NOT EXISTS "${3RDPARTY_VTK_DIR}")
-  message(SEND_ERROR "VTK not found. Set the 3RDPARTY_VTK_DIR cmake cache entry to the directory containing VTK.")
-  set (3RDPARTY_VTK_DIR "3RDPARTY_VTK_DIR-NOTFOUND" CACHE PATH "The directory containing vtk product" FORCE)
-endif()
-
-set(VTK_VERSION "")
 if (3RDPARTY_VTK_DIR AND EXISTS "${3RDPARTY_VTK_DIR}")
-  get_filename_component(3RDPARTY_VTK_DIR_NAME "${3RDPARTY_VTK_DIR}" NAME)
-  string(REGEX MATCH "^VTK-([0-9].[0-9])" VTK_VERSION "${3RDPARTY_VTK_DIR_NAME}")
-  set(VTK_VERSION "${CMAKE_MATCH_1}")
-  if (NOT 3RDPARTY_VTK_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_VTK_INCLUDE_DIR}")
-    set (3RDPARTY_VTK_INCLUDE_DIR "${3RDPARTY_VTK_DIR}/include/vtk-${VTK_VERSION}" CACHE FILEPATH "The directory containing includes of VTK" FORCE)
-  endif()
-  if (NOT 3RDPARTY_VTK_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_VTK_LIBRARY_DIR}")
-    if(EXISTS "${3RDPARTY_VTK_DIR}/lib")
-      set (3RDPARTY_VTK_LIBRARY_DIR "${3RDPARTY_VTK_DIR}/lib" CACHE FILEPATH "The directory containing libs of VTK" FORCE)
-    elseif (EXISTS "${3RDPARTY_VTK_DIR}/lib")
-      set (3RDPARTY_VTK_LIBRARY_DIR "${3RDPARTY_VTK_DIR}/lib" CACHE FILEPATH "The directory containing libs of VTK" FORCE)
-    endif()
-  endif()
-  if(3RDPARTY_VTK_LIBRARY_DIR)
-    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_VTK_LIBRARY_DIR}")
-  endif()
+  set (ENV{VTK_DIR} ${CACHED_VTK_DIR})
 endif()
 
-# vtk libraries
-# lib
-set (VTK_LIBRARY_NAMES vtkCommonCore-${VTK_VERSION}.lib vtkCommonDataModel-${VTK_VERSION}.lib vtkCommonExecutionModel-${VTK_VERSION}.lib
-                       vtkCommonMath-${VTK_VERSION}.lib vtkCommonTransforms-${VTK_VERSION}.lib vtkRenderingCore-${VTK_VERSION}.lib
-                       vtkRenderingOpenGL-${VTK_VERSION}.lib vtkFiltersGeneral-${VTK_VERSION}.lib vtkIOCore-${VTK_VERSION}.lib
-                       vtkIOImage-${VTK_VERSION}.lib vtkImagingCore-${VTK_VERSION}.lib vtkInteractionStyle-${VTK_VERSION}.lib )
+if (VTK_FOUND)
 
-#dll
-set (VTK_DLL_NAMES vtkCommonComputationalGeometry-${VTK_VERSION}.dll
-                   vtkCommonCore-${VTK_VERSION}.dll
-                   vtkCommonDataModel-${VTK_VERSION}.dll
-                   vtkCommonExecutionModel-${VTK_VERSION}.dll
-                   vtkCommonMath-${VTK_VERSION}.dll
-                   vtkCommonMisc-${VTK_VERSION}.dll
-                   vtkCommonSystem-${VTK_VERSION}.dll
-                   vtkCommonTransforms-${VTK_VERSION}.dll
-                   vtkDICOMParser-${VTK_VERSION}.dll
-                   vtkFiltersCore-${VTK_VERSION}.dll
-                   vtkFiltersExtraction-${VTK_VERSION}.dll
-                   vtkFiltersGeneral-${VTK_VERSION}.dll
-                   vtkFiltersGeometry-${VTK_VERSION}.dll
-                   vtkFiltersSources-${VTK_VERSION}.dll
-                   vtkFiltersStatistics-${VTK_VERSION}.dll
-                   vtkIOCore-${VTK_VERSION}.dll
-                   vtkIOImage-${VTK_VERSION}.dll
-                   vtkImagingCore-${VTK_VERSION}.dll
-                   vtkImagingFourier-${VTK_VERSION}.dll
-                   vtkImagingHybrid-${VTK_VERSION}.dll
-                   vtkInteractionStyle-${VTK_VERSION}.dll
-                   vtkRenderingCore-${VTK_VERSION}.dll
-                   vtkRenderingOpenGL-${VTK_VERSION}.dll
-                   vtkalglib-${VTK_VERSION}.dll
-                   vtkjpeg-${VTK_VERSION}.dll
-                   vtkmetaio-${VTK_VERSION}.dll
-                   vtkpng-${VTK_VERSION}.dll
-                   vtksys-${VTK_VERSION}.dll
-                   vtktiff-${VTK_VERSION}.dll
-                   vtkzlib-${VTK_VERSION}.dll )
+  # add compiler flags, preprocessor definitions, include and link dirs
+  include (${VTK_USE_FILE})
 
-# search for dll directory
-if (WIN32)
-  if (NOT 3RDPARTY_VTK_DLL_DIR OR NOT EXISTS "${3RDPARTY_VTK_DLL_DIR}")
-    if(EXISTS "${3RDPARTY_VTK_DIR}/bin")
-      set (3RDPARTY_VTK_DLL_DIR "${3RDPARTY_VTK_DIR}/bin" CACHE FILEPATH "The directory containing dll of VTK" FORCE)
-    elseif (EXISTS "${3RDPARTY_VTK_DIR}/bind")
-      set (3RDPARTY_VTK_DLL_DIR "${3RDPARTY_VTK_DIR}/bind" CACHE FILEPATH "The directory containing dll of VTK" FORCE)
+  if (VTK_LIBRARIES)
+
+    set (3RDPARTY_VTK_INCLUDE_DIRS)
+    set (3RDPARTY_VTK_LIBRARY_DIRS)
+    set (3RDPARTY_VTK_DLL_DIRS)
+
+    set (HARDCODED_D3D9_LIB "C:/Program Files (x86)/Microsoft DirectX SDK (June 2010)/Lib/x64/d3d9.lib")
+
+    foreach (VTK_LIBRARY ${VTK_LIBRARIES})
+      string (REGEX MATCH "^vtk" IS_VTK_LIBRARY ${VTK_LIBRARY})
+      if (IS_VTK_LIBRARY)
+        # get paths from corresponding variables
+        if (${VTK_LIBRARY}_INCLUDE_DIRS AND EXISTS "${${VTK_LIBRARY}_INCLUDE_DIRS}")
+          list (APPEND 3RDPARTY_VTK_INCLUDE_DIRS "${${VTK_LIBRARY}_INCLUDE_DIRS}")
+        endif()
+
+        if (${VTK_LIBRARY}_LIBRARY_DIRS AND EXISTS "${${VTK_LIBRARY}_LIBRARY_DIRS}")
+          list (APPEND 3RDPARTY_VTK_LIBRARY_DIRS "${${VTK_LIBRARY}_LIBRARY_DIRS}")
+        endif()
+
+        if (${VTK_LIBRARY}_RUNTIME_LIBRARY_DIRS AND EXISTS "${${VTK_LIBRARY}_RUNTIME_LIBRARY_DIRS}")
+          list (APPEND 3RDPARTY_VTK_DLL_DIRS "${${VTK_LIBRARY}_RUNTIME_LIBRARY_DIRS}")
+          if (NOT WIN32)
+            list (APPEND 3RDPARTY_VTK_LIBRARY_DIRS "${${VTK_LIBRARY}_RUNTIME_LIBRARY_DIRS}")
+          endif()
+        endif()
+
+        # get paths from corresponding properties
+        get_target_property (TARGET_VTK_IMPORT_CONFS ${VTK_LIBRARY} IMPORTED_CONFIGURATIONS)
+
+        if (TARGET_VTK_IMPORT_CONFS)
+          list (GET TARGET_VTK_IMPORT_CONFS 0 CHOSEN_IMPORT_CONF)
+          
+          # todo: choose configuration in connection with the build type
+          #if (CMAKE_BUILD_TYPE)
+          #  foreach (IMPORT_CONF ${TARGET_VTK_IMPORT_CONFS})
+          #  endforeach()
+          #endif()
+
+          get_target_property (TARGET_PROPERTY_IMP_LINK_INTERFACE_LIBRARIES ${VTK_LIBRARY} IMPORTED_LINK_INTERFACE_LIBRARIES_${CHOSEN_IMPORT_CONF})
+          if(TARGET_PROPERTY_IMP_LINK_INTERFACE_LIBRARIES)
+            list (FIND TARGET_PROPERTY_IMP_LINK_INTERFACE_LIBRARIES "${HARDCODED_D3D9_LIB}" D3D9_INDEX)
+            if (NOT D3D9_INDEX EQUAL -1)
+              message (STATUS "Warning: ${HARDCODED_D3D9_LIB} has been removed from ${VTK_LIBRARY}")
+              
+              list (REMOVE_AT TARGET_PROPERTY_IMP_LINK_INTERFACE_LIBRARIES ${D3D9_INDEX})
+              set_target_properties (${VTK_LIBRARY} PROPERTIES IMPORTED_LINK_INTERFACE_LIBRARIES_${CHOSEN_IMPORT_CONF} "${TARGET_PROPERTY_IMP_LINK_INTERFACE_LIBRARIES}")
+            endif()            
+          endif()
+
+          get_target_property (TARGET_PROPERTY_IMP_PATH ${VTK_LIBRARY} IMPORTED_IMPLIB_${CHOSEN_IMPORT_CONF})
+          if(TARGET_PROPERTY_IMP_PATH AND EXISTS "${TARGET_PROPERTY_IMP_PATH}")
+            get_filename_component (TARGET_PROPERTY_IMP_DIR "${TARGET_PROPERTY_IMP_PATH}" PATH)
+            list (APPEND 3RDPARTY_VTK_LIBRARY_DIRS "${TARGET_PROPERTY_IMP_DIR}")
+          endif()
+
+          get_target_property (TARGET_PROPERTY_LOCATION_PATH ${VTK_LIBRARY} IMPORTED_LOCATION_${CHOSEN_IMPORT_CONF})
+          if(TARGET_PROPERTY_LOCATION_PATH AND EXISTS "${TARGET_PROPERTY_LOCATION_PATH}")
+            get_filename_component (TARGET_PROPERTY_LOCATION_DIR "${TARGET_PROPERTY_LOCATION_PATH}" PATH)
+
+            if (WIN32)
+              list (APPEND 3RDPARTY_VTK_DLL_DIRS "${TARGET_PROPERTY_LOCATION_DIR}")
+            else()
+              list (APPEND 3RDPARTY_VTK_LIBRARY_DIRS "${TARGET_PROPERTY_LOCATION_DIR}")
+            endif()
+          endif()
+        endif()
+      endif()
+    endforeach()
+  endif()
+
+  if (3RDPARTY_VTK_INCLUDE_DIRS)
+    list (REMOVE_DUPLICATES 3RDPARTY_VTK_INCLUDE_DIRS)
+    list (APPEND 3RDPARTY_INCLUDE_DIRS ${3RDPARTY_VTK_INCLUDE_DIRS})
+
+    list (GET 3RDPARTY_VTK_INCLUDE_DIRS 0 3RDPARTY_VTK_INCLUDE_DIR)
+    set (3RDPARTY_VTK_INCLUDE_DIR "${3RDPARTY_VTK_INCLUDE_DIR}" CACHE PATH "The directory containing headers of VTK" FORCE)
+  endif()
+
+  if (3RDPARTY_VTK_LIBRARY_DIRS)
+    list (REMOVE_DUPLICATES 3RDPARTY_VTK_LIBRARY_DIRS)
+    list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIRS})
+
+    list (GET 3RDPARTY_VTK_LIBRARY_DIRS 0 3RDPARTY_VTK_LIBRARY_DIR)
+    set (3RDPARTY_VTK_LIBRARY_DIR "${3RDPARTY_VTK_LIBRARY_DIR}" CACHE PATH "The directory containing VTK libraries" FORCE)
+  endif()
+
+  if (WIN32)
+    if (3RDPARTY_VTK_DLL_DIRS)
+      list (REMOVE_DUPLICATES 3RDPARTY_VTK_DLL_DIRS)
+      list (APPEND 3RDPARTY_DLL_DIRS ${3RDPARTY_VTK_DLL_DIRS})
+
+      list (GET 3RDPARTY_VTK_DLL_DIRS 0 3RDPARTY_VTK_DLL_DIR)
+      set (3RDPARTY_VTK_DLL_DIR "${3RDPARTY_VTK_DLL_DIR}" CACHE PATH "The directory containing VTK shared libraries" FORCE)
     endif()
   endif()
-
-  if (3RDPARTY_VTK_DLL_DIR OR EXISTS "${3RDPARTY_VTK_DLL_DIR}")
-    list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_VTK_DLL_DIR}")
-  endif()
-endif() 
-
-OCCT_CHECK_AND_UNSET(VTK_DIR)
+endif()
 
 if (3RDPARTY_VTK_INCLUDE_DIR AND EXISTS "${3RDPARTY_VTK_INCLUDE_DIR}")
-  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_VTK_INCLUDE_DIR}")
+  list (APPEND 3RDPARTY_INCLUDE_DIRS ${3RDPARTY_VTK_INCLUDE_DIR})
 else()
   list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_INCLUDE_DIR)
 endif()
 
-if (INSTALL_VTK)
-  OCCT_MAKE_OS_WITH_BITNESS()
-  OCCT_MAKE_COMPILER_SHORT_NAME()
-  if (WIN32)
-    if(3RDPARTY_VTK_DLL_DIR AND EXISTS "${3RDPARTY_VTK_DLL_DIR}")
-      set (CMAKE_FIND_LIBRARY_SUFFIXES ".lib" ".dll")
-      foreach(VTK_DLL_NAME ${VTK_DLL_NAMES})
-        set (3RDPARTY_VTK_DLL "3RDPARTY_VTK_DLL-NOTFOUND" CACHE FILEPATH "VTK shared library" FORCE)
-        find_library(3RDPARTY_VTK_DLL "${VTK_DLL_NAME}" PATHS "${3RDPARTY_VTK_DLL_DIR}" NO_DEFAULT_PATH)
-        if (NOT 3RDPARTY_VTK_DLL OR NOT EXISTS "${3RDPARTY_VTK_DLL}")
-          list (APPEND 3RDPARTY_NOT_INCLUDED "${3RDPARTY_VTK_DLL}")
-        else()
-          install (FILES ${3RDPARTY_VTK_DLL}
-                   CONFIGURATIONS Release
-                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-          install (FILES ${3RDPARTY_VTK_DLL}
-                   CONFIGURATIONS RelWithDebInfo
-                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-          install (FILES ${3RDPARTY_VTK_DLL}
-                   CONFIGURATIONS Debug
-                   DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
-        endif()
-      endforeach()
-      OCCT_CHECK_AND_UNSET(3RDPARTY_VTK_DLL)
-    endif()
-  else ()
-    foreach(VTK_DLL_NAME ${VTK_DLL_NAMES})
-      string(REPLACE ".dll" ".so.1" VTK_DLL_NAME "${VTK_DLL_NAME}")
-      install(FILES "${3RDPARTY_VTK_LIBRARY_DIR}/lib${VTK_DLL_NAME}"
-              CONFIGURATIONS Release
-              DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-              RENAME "lib${VTK_DLL_NAME}")
-      install(FILES "${3RDPARTY_VTK_LIBRARY_DIR}/lib${VTK_DLL_NAME}"
-              CONFIGURATIONS RelWithDebInfo
-              DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-              RENAME "lib${VTK_DLL_NAME}")
-      install(FILES "${3RDPARTY_VTK_LIBRARY_DIR}/lib${VTK_DLL_NAME}"
-              CONFIGURATIONS Debug
-              DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-              RENAME "lib${VTK_DLL_NAME}")
-    endforeach()
-  endif()
-
-  set (USED_3RDPARTY_VTK_DIR "")
+if (3RDPARTY_VTK_LIBRARY_DIR AND EXISTS "${3RDPARTY_VTK_LIBRARY_DIR}")
+  list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIR})
 else()
-  # the library directory for using by the executable
-  if (WIN32)
-    set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_DLL_DIR})
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_LIBRARY_DIR)
+endif()
+
+if (WIN32)
+  if (3RDPARTY_VTK_DLL_DIR OR EXISTS "${3RDPARTY_VTK_DLL_DIR}")
+    list (APPEND 3RDPARTY_DLL_DIRS ${3RDPARTY_VTK_DLL_DIR})
   else()
-    set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_LIBRARY_DIR})
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_DLL_DIR)
   endif()
 endif()
 
-mark_as_advanced (VTK_INCLUDE_DIRS VTK_LIBRARY_DIRS VTK_DIR)
+# the library directory for using by the executable
+if (WIN32)
+  set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_DLL_DIR})
+else()
+  set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_LIBRARY_DIR})
+endif()
+
+OCCT_CHECK_AND_UNSET (VTK_INCLUDE_DIRS)
+OCCT_CHECK_AND_UNSET (VTK_LIBRARY_DIRS)
+OCCT_CHECK_AND_UNSET (VTK_DIR)

adm/genconf.tcl

@@ -27,8 +27,12 @@ source [file join [file dirname [info script]] genconfdeps.tcl]
 package require Tk
 
 set aRowIter 0
+set aCheckRowIter 0
 frame .myFrame -padx 5 -pady 5
 pack  .myFrame -fill both -expand 1
+frame .myFrame.myVsFrame
+frame .myFrame.myHxxChecks
+frame .myFrame.myChecks
 
 set SYS_VS_LIST {}
 set SYS_VC_LIST {}
@@ -86,8 +90,8 @@ proc wokdep:gui:Close {} {
 }
 
 proc wokdep:gui:SwitchConfig {} {
-  set ::VCVER  [lindex $::SYS_VC_LIST     [.myFrame.myVsCombo current]]
-  set ::VCVARS [lindex $::SYS_VCVARS_LIST [.myFrame.myVsCombo current]]
+  set ::VCVER  [lindex $::SYS_VC_LIST     [.myFrame.myVsFrame.myVsCombo current]]
+  set ::VCVARS [lindex $::SYS_VCVARS_LIST [.myFrame.myVsFrame.myVsCombo current]]
 
   set ::CSF_OPT_INC {}
   set ::CSF_OPT_LIB32 {}
@@ -359,41 +363,40 @@ proc wokdep:gui:Show64Bitness { theRowIter } {
 }
 
 # Header
-ttk::label    .myFrame.myVsLbl       -text "Visual Studio configuration" -relief solid -padding {5 5 80 5}
-ttk::combobox .myFrame.myVsCombo     -values $SYS_VS_LIST -state readonly -textvariable VSVER -width 30
-ttk::combobox .myFrame.myArchCombo   -values { {32} {64} } -textvariable ARCH -state readonly -width 6
+ttk::label    .myFrame.myVsFrame.myVsLbl       -text "Visual Studio configuration:" -padding {5 5 80 5}
+ttk::combobox .myFrame.myVsFrame.myVsCombo     -values $SYS_VS_LIST -state readonly -textvariable VSVER -width 30
+ttk::combobox .myFrame.myVsFrame.myArchCombo   -values { {32} {64} } -textvariable ARCH -state readonly -width 6
 entry         .myFrame.myVcEntry     -textvariable VCVER  -width 6
 entry         .myFrame.myVcVarsEntry -textvariable VCVARS -width 70
 ttk::button   .myFrame.myVcBrowseBtn -text "Browse" -command wokdep:gui:BrowseVcVars
 
 #
-ttk::label    .myFrame.myOcctBuildLbl -text "OCCT headers configuration" -relief solid -padding {5 5 80 5}
-checkbutton   .myFrame.myScutsCheck   -offvalue "false" -onvalue "true" -variable SHORTCUT_HEADERS
-ttk::label    .myFrame.myScutsLbl     -text "Short-cut headers instead original ones in inc"
+checkbutton   .myFrame.myHxxChecks.myScutsCheck   -offvalue "false" -onvalue "true" -variable SHORTCUT_HEADERS
+ttk::label    .myFrame.myHxxChecks.myScutsLbl     -text "Create short-cuts to headers in inc folder instead of copying"
 
 #
-ttk::label    .myFrame.mySrchLbl       -text "3rd-parties search path" -relief solid -padding {5 5 80 5}
+ttk::label    .myFrame.mySrchLbl       -text "3rd-parties search path:" -padding {5 5 80 5}
 entry         .myFrame.mySrchEntry     -textvariable PRODUCTS_PATH -width 80
 ttk::button   .myFrame.mySrchBrowseBtn -text "Browse" -command wokdep:gui:BrowsePartiesRoot
-checkbutton   .myFrame.myFImageCheck   -offvalue "false" -onvalue "true" -variable HAVE_FREEIMAGE -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myFImageLbl     -text "Use FreeImage"
-checkbutton   .myFrame.myGl2psCheck    -offvalue "false" -onvalue "true" -variable HAVE_GL2PS     -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myGl2psLbl      -text "Use GL2PS"
-checkbutton   .myFrame.myTbbCheck      -offvalue "false" -onvalue "true" -variable HAVE_TBB       -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myTbbLbl        -text "Use Intel TBB"
-checkbutton   .myFrame.myOpenClCheck   -offvalue "false" -onvalue "true" -variable HAVE_OPENCL    -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myOpenClLbl     -text "Use OpenCL"
-checkbutton   .myFrame.myMacGLXCheck   -offvalue "false" -onvalue "true" -variable MACOSX_USE_GLX
-ttk::label    .myFrame.myMacGLXLbl     -text "Use X11 for windows drawing"
-ttk::label    .myFrame.myVtkLbl        -text "Use VTK"
-checkbutton   .myFrame.myVtkCheck      -offvalue "false" -onvalue "true" -variable HAVE_VTK       -command wokdep:gui:UpdateList
-checkbutton   .myFrame.myQt4Check      -offvalue "false" -onvalue "true" -variable CHECK_QT4      -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myQt4Lbl        -text "Search Qt4"
-checkbutton   .myFrame.myJDKCheck      -offvalue "false" -onvalue "true" -variable CHECK_JDK      -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myJDKLbl        -text "Search JDK"
+checkbutton   .myFrame.myChecks.myFImageCheck   -offvalue "false" -onvalue "true" -variable HAVE_FREEIMAGE -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myFImageLbl     -text "Use FreeImage"
+checkbutton   .myFrame.myChecks.myGl2psCheck    -offvalue "false" -onvalue "true" -variable HAVE_GL2PS     -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myGl2psLbl      -text "Use GL2PS"
+checkbutton   .myFrame.myChecks.myTbbCheck      -offvalue "false" -onvalue "true" -variable HAVE_TBB       -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myTbbLbl        -text "Use Intel TBB"
+checkbutton   .myFrame.myChecks.myOpenClCheck   -offvalue "false" -onvalue "true" -variable HAVE_OPENCL    -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myOpenClLbl     -text "Use OpenCL"
+checkbutton   .myFrame.myChecks.myMacGLXCheck   -offvalue "false" -onvalue "true" -variable MACOSX_USE_GLX
+ttk::label    .myFrame.myChecks.myMacGLXLbl     -text "Use X11 for windows drawing"
+ttk::label    .myFrame.myChecks.myVtkLbl        -text "Use VTK"
+checkbutton   .myFrame.myChecks.myVtkCheck      -offvalue "false" -onvalue "true" -variable HAVE_VTK       -command wokdep:gui:UpdateList
+checkbutton   .myFrame.myChecks.myQt4Check      -offvalue "false" -onvalue "true" -variable CHECK_QT4      -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myQt4Lbl        -text "Search Qt4"
+checkbutton   .myFrame.myChecks.myJDKCheck      -offvalue "false" -onvalue "true" -variable CHECK_JDK      -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myJDKLbl        -text "Search JDK"
 
 # Additional headers search paths
-ttk::label    .myFrame.myIncLbl    -text "Additional headers search paths" -relief solid -padding {5 5 80 5}
+ttk::label    .myFrame.myIncLbl    -text "Additional headers search paths:" -padding {5 5 80 5}
 scrollbar     .myFrame.myIncScrl   -command ".myFrame.myIncList yview"
 listbox       .myFrame.myIncList   -listvariable CSF_OPT_INC -width 80 -height 5 -yscrollcommand ".myFrame.myIncScrl set"
 ttk::button   .myFrame.myIncAdd    -text "Add"     -command wokdep:gui:AddIncPath
@@ -403,7 +406,7 @@ ttk::button   .myFrame.myIncClear  -text "Reset"   -command wokdep:gui:ResetIncP
 ttk::label    .myFrame.myIncErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
 
 # Additional libraries (32-bit) search paths
-ttk::label    .myFrame.myLib32Lbl    -text "Additional libraries (32-bit) search paths" -relief solid -padding {5 5 80 5}
+ttk::label    .myFrame.myLib32Lbl    -text "Additional libraries (32-bit) search paths:" -padding {5 5 80 5}
 scrollbar     .myFrame.myLib32Scrl   -command ".myFrame.myLib32List yview"
 listbox       .myFrame.myLib32List   -listvariable CSF_OPT_LIB32 -width 80 -height 5 -yscrollcommand ".myFrame.myLib32Scrl set"
 ttk::button   .myFrame.myLib32Add    -text "Add"     -command wokdep:gui:AddLib32Path
@@ -413,7 +416,7 @@ ttk::button   .myFrame.myLib32Clear  -text "Reset"   -command wokdep:gui:ResetLi
 ttk::label    .myFrame.myLib32ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
 
 # Additional libraries (64-bit) search paths
-ttk::label    .myFrame.myLib64Lbl    -text "Additional libraries (64-bit) search paths" -relief solid -padding {5 5 80 5}
+ttk::label    .myFrame.myLib64Lbl    -text "Additional libraries (64-bit) search paths:" -padding {5 5 80 5}
 scrollbar     .myFrame.myLib64Scrl   -command ".myFrame.myLib64List yview"
 listbox       .myFrame.myLib64List   -listvariable CSF_OPT_LIB64 -width 80 -height 5 -yscrollcommand ".myFrame.myLib64Scrl set"
 ttk::button   .myFrame.myLib64Add    -text "Add"     -command wokdep:gui:AddLib64Path
@@ -423,7 +426,7 @@ ttk::button   .myFrame.myLib64Clear  -text "Reset"   -command wokdep:gui:ResetLi
 ttk::label    .myFrame.myLib64ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
 
 # Additional executables (32-bit) search paths
-ttk::label    .myFrame.myBin32Lbl    -text "Additional executables (32-bit) search paths" -relief solid -padding {5 5 80 5}
+ttk::label    .myFrame.myBin32Lbl    -text "Additional executables (32-bit) search paths:" -padding {5 5 80 5}
 scrollbar     .myFrame.myBin32Scrl   -command ".myFrame.myBin32List yview"
 listbox       .myFrame.myBin32List   -listvariable CSF_OPT_BIN32 -width 80 -height 5 -yscrollcommand ".myFrame.myBin32Scrl set"
 ttk::button   .myFrame.myBin32Add    -text "Add"     -command wokdep:gui:AddBin32Path
@@ -433,7 +436,7 @@ ttk::button   .myFrame.myBin32Clear  -text "Reset"   -command wokdep:gui:ResetBi
 ttk::label    .myFrame.myBin32ErrLbl -text "Error: " -foreground red -padding {5 5 5 5}
 
 # Additional executables (64-bit) search paths
-ttk::label    .myFrame.myBin64Lbl    -text "Additional executables (64-bit) search paths" -relief solid -padding {5 5 80 5}
+ttk::label    .myFrame.myBin64Lbl    -text "Additional executables (64-bit) search paths:" -padding {5 5 80 5}
 scrollbar     .myFrame.myBin64Scrl   -command ".myFrame.myBin64List yview"
 listbox       .myFrame.myBin64List   -listvariable CSF_OPT_BIN64 -width 80 -height 5 -yscrollcommand ".myFrame.myBin64Scrl set"
 ttk::button   .myFrame.myBin64Add    -text "Add"     -command wokdep:gui:AddBin64Path
@@ -449,10 +452,10 @@ ttk::button   .myFrame.myClose -text "Close" -command wokdep:gui:Close
 # Create grid
 # Header
 if { "$tcl_platform(platform)" == "windows" } {
-  grid .myFrame.myVsLbl       -row $aRowIter -column 0 -columnspan 10 -sticky w
-  incr aRowIter
-  grid .myFrame.myVsCombo     -row $aRowIter -column 0 -columnspan 2 -sticky w
-  grid .myFrame.myArchCombo   -row $aRowIter -column 2 -sticky w
+  grid .myFrame.myVsFrame               -row $aRowIter -column 0 -columnspan 10 -sticky w
+  grid .myFrame.myVsFrame.myVsLbl       -row 0 -column 0
+  grid .myFrame.myVsFrame.myVsCombo     -row 0 -column 1 -padx 5
+  grid .myFrame.myVsFrame.myArchCombo   -row 0 -column 2
   incr aRowIter
   grid .myFrame.myVcEntry     -row $aRowIter -column 0
   grid .myFrame.myVcVarsEntry -row $aRowIter -column 1 -columnspan 4 -sticky w
@@ -461,10 +464,9 @@ if { "$tcl_platform(platform)" == "windows" } {
 }
 
 #
-grid .myFrame.myOcctBuildLbl -row $aRowIter -column 0 -columnspan 10 -sticky w
-incr aRowIter
-grid .myFrame.myScutsCheck   -row $aRowIter -column 0 -sticky e
-grid .myFrame.myScutsLbl     -row $aRowIter -column 1 -columnspan 2 -sticky w
+grid .myFrame.myHxxChecks -row $aRowIter -column 0 -columnspan 10 -sticky w
+grid .myFrame.myHxxChecks.myScutsCheck   -row 0 -column 0
+grid .myFrame.myHxxChecks.myScutsLbl     -row 0 -column 1
 incr aRowIter
 #
 grid .myFrame.mySrchLbl       -row $aRowIter -column 0 -columnspan 10 -sticky w
@@ -472,29 +474,29 @@ incr aRowIter
 grid .myFrame.mySrchEntry     -row $aRowIter -column 0 -columnspan 5
 grid .myFrame.mySrchBrowseBtn -row $aRowIter -column 6
 incr aRowIter
-grid .myFrame.myFImageCheck   -row $aRowIter -column 0 -sticky e
-grid .myFrame.myFImageLbl     -row $aRowIter -column 1 -sticky w
-grid .myFrame.myQt4Check      -row $aRowIter -column 2 -sticky e
-grid .myFrame.myQt4Lbl        -row $aRowIter -column 3 -sticky w
-incr aRowIter
-grid .myFrame.myGl2psCheck    -row $aRowIter -column 0 -sticky e
-grid .myFrame.myGl2psLbl      -row $aRowIter -column 1 -sticky w
-grid .myFrame.myJDKCheck      -row $aRowIter -column 2 -sticky e
-grid .myFrame.myJDKLbl        -row $aRowIter -column 3 -sticky w
-incr aRowIter
-grid .myFrame.myTbbCheck      -row $aRowIter -column 0 -sticky e
-grid .myFrame.myTbbLbl        -row $aRowIter -column 1 -sticky w
-incr aRowIter
-grid .myFrame.myOpenClCheck   -row $aRowIter -column 0 -sticky e
-grid .myFrame.myOpenClLbl     -row $aRowIter -column 1 -sticky w
-incr aRowIter
-grid .myFrame.myVtkCheck      -row $aRowIter -column 0 -sticky e
-grid .myFrame.myVtkLbl        -row $aRowIter -column 1 -sticky w
+
+grid .myFrame.myChecks        -row $aRowIter -column 0 -columnspan 10 -sticky w
 incr aRowIter
+grid .myFrame.myChecks.myFImageCheck   -row $aCheckRowIter -column 0 -sticky e
+grid .myFrame.myChecks.myFImageLbl     -row $aCheckRowIter -column 1 -sticky w
+grid .myFrame.myChecks.myTbbCheck      -row $aCheckRowIter -column 2 -sticky e
+grid .myFrame.myChecks.myTbbLbl        -row $aCheckRowIter -column 3 -sticky w
+grid .myFrame.myChecks.myQt4Check      -row $aCheckRowIter -column 4 -sticky e
+grid .myFrame.myChecks.myQt4Lbl        -row $aCheckRowIter -column 5 -sticky w
+#grid .myFrame.myChecks.myOpenClCheck   -row $aCheckRowIter -column 6 -sticky e
+#grid .myFrame.myChecks.myOpenClLbl     -row $aCheckRowIter -column 7 -sticky w
+incr aCheckRowIter
+grid .myFrame.myChecks.myGl2psCheck    -row $aCheckRowIter -column 0 -sticky e
+grid .myFrame.myChecks.myGl2psLbl      -row $aCheckRowIter -column 1 -sticky w
+grid .myFrame.myChecks.myVtkCheck      -row $aCheckRowIter -column 2 -sticky e
+grid .myFrame.myChecks.myVtkLbl        -row $aCheckRowIter -column 3 -sticky w
+grid .myFrame.myChecks.myJDKCheck      -row $aCheckRowIter -column 4 -sticky e
+grid .myFrame.myChecks.myJDKLbl        -row $aCheckRowIter -column 5 -sticky w
+incr aCheckRowIter
 if { "$::tcl_platform(os)" == "Darwin" } {
-  grid .myFrame.myMacGLXCheck -row $aRowIter -column 0 -sticky e
-  grid .myFrame.myMacGLXLbl   -row $aRowIter -column 1 -sticky w
-  incr aRowIter
+  grid .myFrame.myChecks.myMacGLXCheck -row $aCheckRowIter -column 0 -sticky e
+  grid .myFrame.myChecks.myMacGLXLbl   -row $aCheckRowIter -column 1 -sticky w
+  incr aCheckRowIter
 }
 
 # Additional headers search paths
@@ -528,10 +530,10 @@ grid .myFrame.mySave  -row $aRowIter -column 4 -columnspan 2
 grid .myFrame.myClose -row $aRowIter -column 6 -columnspan 2
 
 # Bind events
-bind .myFrame.myVsCombo <<ComboboxSelected>> {
+bind .myFrame.myVsFrame.myVsCombo <<ComboboxSelected>> {
   wokdep:gui:SwitchConfig
 }
-bind .myFrame.myArchCombo <<ComboboxSelected>> {
+bind .myFrame.myVsFrame.myArchCombo <<ComboboxSelected>> {
   wokdep:gui:SwitchArch
 }
 

adm/genconfdeps.tcl

@@ -770,10 +770,10 @@ proc wokdep:SearchVTK {theErrInc theErrLib32 theErrLib64 theErrBin32 theErrBin64
       # We didn't find preferred binary path => search through inc path or among all available VTK directories
       if { "$aVtkBinPath" == "" } {
         # Try to find in lib path
-        set aPath [wokdep:SearchBin "vtkCommonCore-${aVtkVer}.dll" "$anArchIter" "$aLibPath/bin"]
-        if { "$aPath" != "" } { lappend ::CSF_OPT_BIN$anArchIter "$aLibPath/bin"
-        } elseif { [wokdep:SearchBin "vtkCommonCore-${aVtkVer}.dll" "$anArchIter" "$aLibPath/lib"] != "" } {
-          lappend ::CSF_OPT_BIN$anArchIter "$aLibPath/lib"
+        set aPath [wokdep:SearchBin "vtkCommonCore-${aVtkVer}.dll" "$anArchIter" "$aVtkLibPath/bin"]
+        if { "$aPath" != "" } { lappend ::CSF_OPT_BIN$anArchIter "$aVtkLibPath/bin"
+        } elseif { [wokdep:SearchBin "vtkCommonCore-${aVtkVer}.dll" "$anArchIter" "$aVtkLibPath/lib"] != "" } {
+          lappend ::CSF_OPT_BIN$anArchIter "$aVtkLibPath/lib"
         } else {
            lappend anErrBin$anArchIter "Error: 'vtkCommonCore-${aVtkVer}.dll' not found (VTK)"
            set isFound "false"

adm/gendoc.tcl

@@ -731,7 +731,7 @@ proc OCCDoc_MakeDoxyfile {docType outDir tagFileDir {doxyFileName} {generatorMod
 
     puts $doxyFile "DOTFILE_DIRS             = $outDir/html"
     puts $doxyFile "DOT_PATH                 = $graphvizPath"
-    puts $doxyFile "INCLUDE_PATH             = [OCCDoc_GetIncDir $productsPath]"
+    puts $doxyFile "INCLUDE_PATH             = [OCCDoc_GetSourceDir $productsPath]"
     
     # list of files to generate
     set mainpage [OCCDoc_MakeMainPage $outDir $outDir/$name.dox $modules $productsPath]

adm/templates/codeblocks.bat

@@ -0,0 +1,19 @@
+@echo off
+
+rem Setup environment
+call "%~dp0env.bat" %1 %2 %3
+
+rem Define path to project file
+set "PRJFILE=%~dp0\adm\wnt\cbp\OCCT.workspace"
+if not exist "%PRJFILE%" set "PRJFILE=%~dp0\adm\wnt\cbp\Products.workspace"
+if not "%4" == "" (
+  set "PRJFILE=%4"
+)
+
+if "%CB_PATH%"=="" if exist "%PROGRAMFILES%\CodeBlocks" set "CB_PATH=%PROGRAMFILES%\CodeBlocks\codeblocks.exe"
+if "%CB_PATH%"=="" set "CB_PATH=codeblocks.exe"
+
+set "CASBIN=wnt\cbp"
+set "PATH=%~dp0%CASBIN%\bin%CASDEB%;%PATH%"
+
+start "" "%CB_PATH%" "%PRJFILE%"

adm/templates/custom.install.sh.in

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-if [ "$COMPILER" == "@COMPILER@" ]; then
-  if [ "$ARCH" == "@COMPILER_BITNESS@" ]; then
+if [ "$1" == "@COMPILER@" ]; then
+  if [ "$2" == "@COMPILER_BITNESS@" ]; then
     export TCL_DIR="@USED_3RDPARTY_TCL_DIR@"
     export TK_DIR="@USED_3RDPARTY_TK_DIR@"
     export FREETYPE_DIR="@USED_3RDPARTY_FREETYPE_DIR@"
@@ -9,6 +9,32 @@ if [ "$COMPILER" == "@COMPILER@" ]; then
     export GL2PS_DIR="@USED_3RDPARTY_GL2PS_DIR@"
     export TBB_DIR="@USED_3RDPARTY_TBB_DIR@"
     export VTK_DIR="@USED_3RDPARTY_VTK_DIR@"
+
+    export BIN_PATH="@INSTALL_BIN_DIR@"
+    if [ "$BIN_PATH" != "" ]; then
+      export PATH="${BIN_PATH}:${PATH}"
+    fi
+
+    export LIB_PATH="@INSTALL_LIB_DIR@"
+    if [ "$LIB_PATH" != "" ]; then
+      if [ "$LD_LIBRARY_PATH" != "" ]; then
+        export LD_LIBRARY_PATH="${LIB_PATH}:${LD_LIBRARY_PATH}"
+      else
+        export LD_LIBRARY_PATH="${LIB_PATH}"
+      fi
+    fi
+    
+    export OCCT_RESOURCE_PATH="${CASROOT}/src"
+    if [ "@INSTALL_OCCT_RESOURCE_DIR@" != "" ]; then
+      export OCCT_RESOURCE_PATH="@INSTALL_OCCT_RESOURCE_DIR@"
+    fi
+
+    # required for set default testing environment
+    # and "Samples" window creation in DRAW
+    export OCCT_SHARE_PATH="${CASROOT}"
+    if [ "@INSTALL_SHARE_DIR@" != "" ]; then
+      export OCCT_SHARE_PATH="@INSTALL_SHARE_DIR@"
+    fi
   fi
 fi
 

adm/templates/draw.sh

@@ -2,7 +2,7 @@
 
 aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
 
-source "${aScriptPath}/env.sh" "$1" "$2"
+source "${aScriptPath}/env.sh" "$1"
 
 echo 'Hint: use "pload ALL" command to load standard commands'
 DRAWEXE

adm/templates/env.bat

@@ -9,20 +9,16 @@ rem   vc8 win32 Release
 
 set "SCRIPTROOT=%~dp0"
 set "SCRIPTROOT=%SCRIPTROOT:~0,-1%"
-set "CASROOT=__CASROOT__"
-if not ["%CASROOT%"] == [""] if exist "%SCRIPTROOT%\%CASROOT%" set "CASROOT=%SCRIPTROOT%\%CASROOT%"
-if     ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
 
 rem ----- Reset values to defaults -----
 set "CASDEB="
-set "VCVER=vc8"
-set "ARCH=32"
+set "VCVER=vc10"
+set "ARCH=64"
 set "VCVARS="
 set "HAVE_TBB=false"
 set "HAVE_OPENCL=false"
 set "HAVE_FREEIMAGE=false"
 set "HAVE_GL2PS=false"
-set "HAVE_OPENCL=false"
 set "HAVE_VTK=false"
 set "HAVE_D3D=false"
 set "CSF_OPT_INC="
@@ -32,10 +28,16 @@ set "CSF_OPT_BIN32="
 set "CSF_OPT_BIN64="
 
 rem ----- Load local settings -----
+if not ["%CASROOT%"] == [""] if exist "%CASROOT%\custom.bat" (
+  call "%CASROOT%\custom.bat" %1 %2 %3 %4 %5
+)
 if exist "%~dp0custom.bat" (
   call "%~dp0custom.bat" %1 %2 %3 %4 %5
 )
 
+if not ["%CASROOT%"] == [""] if exist "%SCRIPTROOT%\%CASROOT%" set "CASROOT=%SCRIPTROOT%\%CASROOT%"
+if     ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
+
 rem ----- Read script arguments (override local settings) -----
 if not ["%1"]    == [""]      set "VCVER=%1"
 if not ["%2"]    == [""]      set "ARCH=%2"
@@ -46,19 +48,14 @@ if /I ["%3"]     == ["d"]     set "CASDEB=d"
 if /I ["%3"]     == ["i"]     set "CASDEB=i"
 if /I ["%3"]     == ["relwithdeb"] set "CASDEB=i"
 
-set "CSF_OPT_INC=%CSF_OPT_INC%;%CASROOT%\inc"
-set "CSF_OPT_LIB32D=%CSF_OPT_LIB32%;%CASROOT%\win32\%VCVER%\libd"
-set "CSF_OPT_LIB64D=%CSF_OPT_LIB64%;%CASROOT%\win64\%VCVER%\libd"
-set "CSF_OPT_BIN32D=%CSF_OPT_BIN32%;%CASROOT%\win32\%VCVER%\bind"
-set "CSF_OPT_BIN64D=%CSF_OPT_BIN64%;%CASROOT%\win64\%VCVER%\bind"
-set "CSF_OPT_LIB32I=%CSF_OPT_LIB32%;%CASROOT%\win32\%VCVER%\libi"
-set "CSF_OPT_LIB64I=%CSF_OPT_LIB64%;%CASROOT%\win64\%VCVER%\libi"
-set "CSF_OPT_BIN32I=%CSF_OPT_BIN32%;%CASROOT%\win32\%VCVER%\bini"
-set "CSF_OPT_BIN64I=%CSF_OPT_BIN64%;%CASROOT%\win64\%VCVER%\bini"
-set "CSF_OPT_LIB32=%CSF_OPT_LIB32%;%CASROOT%\win32\%VCVER%\lib"
-set "CSF_OPT_LIB64=%CSF_OPT_LIB64%;%CASROOT%\win64\%VCVER%\lib"
-set "CSF_OPT_BIN32=%CSF_OPT_BIN32%;%CASROOT%\win32\%VCVER%\bin"
-set "CSF_OPT_BIN64=%CSF_OPT_BIN64%;%CASROOT%\win64\%VCVER%\bin"
+set "CSF_OPT_LIB32D=%CSF_OPT_LIB32%"
+set "CSF_OPT_LIB64D=%CSF_OPT_LIB64%"
+set "CSF_OPT_BIN32D=%CSF_OPT_BIN32%"
+set "CSF_OPT_BIN64D=%CSF_OPT_BIN64%"
+set "CSF_OPT_LIB32I=%CSF_OPT_LIB32%"
+set "CSF_OPT_LIB64I=%CSF_OPT_LIB64%"
+set "CSF_OPT_BIN32I=%CSF_OPT_BIN32%"
+set "CSF_OPT_BIN64I=%CSF_OPT_BIN64%"
 
 rem ----- Optional 3rd-parties should be enabled by HAVE macros -----
 set "CSF_OPT_CMPL="
@@ -147,9 +144,6 @@ if exist "%CASROOT%\src\DrawResources" (
   set "DRAWHOME=%CASROOT%\src\DrawResources"
   set "CSF_DrawPluginDefaults=%DRAWHOME%"
 )
-if exist "%SCRIPTROOT%\src\DrawResourcesProducts" (
-  set "CSF_DrawPluginProductsDefaults=%SCRIPTROOT%\src\DrawResourcesProducts"
-)
 goto :eof
 
 :concatCmplInc
@@ -157,9 +151,13 @@ set "CSF_OPT_CMPL=%CSF_OPT_CMPL% -I%1"
 goto :eof
 
 :concatLib32
-set "OPT_LIB32=%OPT_LIB32% /LIBPATH:%1"
+rem Compiler options for Code::Blocks: -L for gcc/mingw and /LIBPATH for msvc
+rem set "OPT_LIB32=%OPT_LIB32% /LIBPATH:%1"
+set "OPT_LIB32=%OPT_LIB32% -L%1"
 goto :eof
 
 :concatLib64
-set "OPT_LIB64=%OPT_LIB64% /LIBPATH:%1"
+rem Compiler options for Code::Blocks: -L for gcc/mingw and /LIBPATH for msvc
+rem set "OPT_LIB64=%OPT_LIB64% /LIBPATH:%1"
+set "OPT_LIB64=%OPT_LIB64% -L%1"
 goto :eof

adm/templates/env.install.bat.in

@@ -5,7 +5,7 @@ set "SCRIPTROOT=%SCRIPTROOT:~0,-1%"
 
 set "VCVER=@COMPILER@"
 set "ARCH=@COMPILER_BITNESS@"
-set "CASDEB=@BUILD_LETTER@"
+set "CASDEB=@CURRENT_BUILD_LETTER@"
 
 if not ["%1"]    == [""]      set "VCVER=%1"
 if not ["%2"]    == [""]      set "ARCH=%2"

adm/templates/env.install.sh.in

@@ -35,7 +35,7 @@ fi
 
 # ----- Set local settings -----
 if [ -e "${aScriptPath}/custom.sh" ]; then 
-  source "${aScriptPath}/custom.sh" "${COMPILER}" "${WOKSTATION}${ARCH}" "${CASDEB}"
+  source "${aScriptPath}/custom.sh" "${COMPILER}" "${ARCH}"
 fi
 
 THRDPARTY_PATH=""
@@ -76,15 +76,10 @@ if [ "$TK_DIR" != "$TCL_DIR" ]; then
   fi
 fi
 
-BIN_PATH="${WOKSTATION}${ARCH}/${COMPILER}/bin${CASDEB}"
-LIBS_PATH="${WOKSTATION}${ARCH}/${COMPILER}/lib${CASDEB}"
-
-export PATH="${CASROOT}/${BIN_PATH}:${PATH}"
-
 if [ "$LD_LIBRARY_PATH" != "" ]; then
-  export LD_LIBRARY_PATH="${CASROOT}/${LIBS_PATH}:${THRDPARTY_PATH}:${LD_LIBRARY_PATH}"
+  export LD_LIBRARY_PATH="${THRDPARTY_PATH}:${LD_LIBRARY_PATH}"
 else
-  export LD_LIBRARY_PATH="${CASROOT}/${LIBS_PATH}:${THRDPARTY_PATH}"
+  export LD_LIBRARY_PATH="${THRDPARTY_PATH}"
 fi
 
 if [ "$WOKSTATION" == "mac" ]; then
@@ -99,34 +94,34 @@ fi
 export CSF_LANGUAGE=us
 export MMGT_CLEAR=1
 export CSF_EXCEPTION_PROMPT=1
-export CSF_SHMessage="${CASROOT}/src/SHMessage"
-export CSF_MDTVTexturesDirectory="${CASROOT}/src/Textures"
-export CSF_ShadersDirectory="${CASROOT}/src/Shaders"
-export CSF_XSMessage="${CASROOT}/src/XSMessage"
-export CSF_TObjMessage="${CASROOT}/src/TObj"
-export CSF_StandardDefaults="${CASROOT}/src/StdResource"
-export CSF_PluginDefaults="${CASROOT}/src/StdResource"
-export CSF_XCAFDefaults="${CASROOT}/src/StdResource"
-export CSF_TObjDefaults="${CASROOT}/src/StdResource"
-export CSF_StandardLiteDefaults="${CASROOT}/src/StdResource"
-export CSF_UnitsLexicon="${CASROOT}/src/UnitsAPI/Lexi_Expr.dat"
-export CSF_UnitsDefinition="${CASROOT}/src/UnitsAPI/Units.dat"
-export CSF_IGESDefaults="${CASROOT}/src/XSTEPResource"
-export CSF_STEPDefaults="${CASROOT}/src/XSTEPResource"
-export CSF_XmlOcafResource="${CASROOT}/src/XmlOcafResource"
-export CSF_MIGRATION_TYPES="${CASROOT}/src/StdResource/MigrationSheet.txt"
+export CSF_SHMessage="${OCCT_RESOURCE_PATH}/SHMessage"
+export CSF_MDTVTexturesDirectory="${OCCT_RESOURCE_PATH}/Textures"
+export CSF_ShadersDirectory="${OCCT_RESOURCE_PATH}/Shaders"
+export CSF_XSMessage="${OCCT_RESOURCE_PATH}/XSMessage"
+export CSF_TObjMessage="${OCCT_RESOURCE_PATH}/TObj"
+export CSF_StandardDefaults="${OCCT_RESOURCE_PATH}/StdResource"
+export CSF_PluginDefaults="${OCCT_RESOURCE_PATH}/StdResource"
+export CSF_XCAFDefaults="${OCCT_RESOURCE_PATH}/StdResource"
+export CSF_TObjDefaults="${OCCT_RESOURCE_PATH}/StdResource"
+export CSF_StandardLiteDefaults="${OCCT_RESOURCE_PATH}/StdResource"
+export CSF_UnitsLexicon="${OCCT_RESOURCE_PATH}/UnitsAPI/Lexi_Expr.dat"
+export CSF_UnitsDefinition="${OCCT_RESOURCE_PATH}/UnitsAPI/Units.dat"
+export CSF_IGESDefaults="${OCCT_RESOURCE_PATH}/XSTEPResource"
+export CSF_STEPDefaults="${OCCT_RESOURCE_PATH}/XSTEPResource"
+export CSF_XmlOcafResource="${OCCT_RESOURCE_PATH}/XmlOcafResource"
+export CSF_MIGRATION_TYPES="${OCCT_RESOURCE_PATH}/StdResource/MigrationSheet.txt"
 
 # Draw Harness special stuff
-if [ -e "${CASROOT}/src/DrawResources" ]; then
-  export DRAWHOME="${CASROOT}/src/DrawResources"
-  export CSF_DrawPluginDefaults="${CASROOT}/src/DrawResources"
+if [ -e "${OCCT_RESOURCE_PATH}/DrawResources" ]; then
+  export DRAWHOME="${OCCT_RESOURCE_PATH}/DrawResources"
+  export CSF_DrawPluginDefaults="${OCCT_RESOURCE_PATH}/DrawResources"
 
-  if [ -e "${CASROOT}/src/DrawResources/DrawDefault" ]; then
-    export DRAWDEFAULT="${CASROOT}/src/DrawResources/DrawDefault"
+  if [ -e "${OCCT_RESOURCE_PATH}/DrawResources/DrawDefault" ]; then
+    export DRAWDEFAULT="${OCCT_RESOURCE_PATH}/DrawResources/DrawDefault"
   fi
 fi
 
-if [ -e "${CASROOT}/src/DrawResourcesProducts" ]; then
-  export CSF_DrawPluginProductsDefaults="${CASROOT}/src/DrawResourcesProducts"
+if [ -e "${OCCT_RESOURCE_PATH}/DrawResourcesProducts" ]; then
+  export CSF_DrawPluginProductsDefaults="${OCCT_RESOURCE_PATH}/DrawResourcesProducts"
 fi
 

adm/templates/env.sh

@@ -3,16 +3,8 @@
 # go to the script directory
 aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
 
-export CASROOT="__CASROOT__"
-
-if [ "${CASROOT}" != "" ] && [ -d "${aScriptPath}/${CASROOT}" ]; then
-  export CASROOT="${aScriptPath}/${CASROOT}"
-fi
-if [ "${CASROOT}" == "" ]; then
-  export CASROOT="${aScriptPath}"
-fi
-
 # Reset values
+export CASROOT="__CASROOT__"
 export CASDEB=""
 export TARGET="";
 export HAVE_TBB="false";
@@ -28,8 +20,16 @@ export CSF_OPT_BIN32=""
 export CSF_OPT_BIN64=""
 
 # ----- Set local settings -----
+if [ "${CASROOT}" != "" ] && [ -e "${CASROOT}/custom.sh" ]; then source "${CASROOT}/custom.sh"; fi
 if [ -e "${aScriptPath}/custom.sh" ]; then source "${aScriptPath}/custom.sh"; fi
 
+if [ "${CASROOT}" != "" ] && [ -d "${aScriptPath}/${CASROOT}" ]; then
+  export CASROOT="${aScriptPath}/${CASROOT}"
+fi
+if [ "${CASROOT}" == "" ]; then
+  export CASROOT="${aScriptPath}"
+fi
+
 # Read script arguments
 shopt -s nocasematch
 for i in $*

adm/templates/occt_toolkit.rc.in

@@ -0,0 +1,30 @@
+#include <windows.h>
+#include <Standard_Version.hxx>
+
+VS_VERSION_INFO VERSIONINFO
+FILEVERSION     OCC_VERSION_MAJOR, OCC_VERSION_MINOR, OCC_VERSION_MAINTENANCE, 0
+PRODUCTVERSION  OCC_VERSION_MAJOR, OCC_VERSION_MINOR, OCC_VERSION_MAINTENANCE, 0
+FILEFLAGSMASK   VS_FFI_FILEFLAGSMASK
+#ifdef _DEBUG
+FILEFLAGS VS_FF_DEBUG
+#endif
+FILEOS          VOS_NT
+FILETYPE        VFT_DLL
+FILESUBTYPE     VFT2_UNKNOWN
+BEGIN
+  BLOCK "StringFileInfo"
+  BEGIN BLOCK "040904E4" // Language type = U.S English(0x0409) and Character Set = Windows, Multilingual(0x04E4)
+    BEGIN
+      VALUE "FileDescription", "@PROJECT_NAME@ Toolkit\000"
+      VALUE "FileVersion",     OCC_VERSION_STRING_EXT "\000"
+      VALUE "LegalCopyright",  "\251 OPEN CASCADE SAS\000"
+      VALUE "ProductName",     "@PROJECT_NAME@\000"
+      VALUE "ProductVersion",  OCC_VERSION_STRING_EXT "\000"
+      VALUE "OfficialSite",    "www.opencascade.org\000"
+    END
+  END
+  BLOCK "VarFileInfo"
+  BEGIN
+    VALUE "Translation", 0x0409, 0x04E4
+  END
+END

adm/templates/template.vc10

@@ -85,7 +85,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -95,7 +95,7 @@
       <ProgramDataBaseFileName>.\..\..\..\win32\__VCVER__\obj\__TKNAM__/</ProgramDataBaseFileName>
       <WarningLevel>Level4</WarningLevel>
       <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL32__
     </ClCompile>
     <ResourceCompile>
@@ -107,6 +107,7 @@
       <OutputFile>.\..\..\..\win32\__VCVER__\bin\__TKNAM__.dll</OutputFile>
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\lib;$(CSF_OPT_LIB32);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <GenerateDebugInformation>No</GenerateDebugInformation>
       <ProgramDatabaseFile>.\..\..\..\win32\__VCVER__\bin\__TKNAM__.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
       <ImportLibrary>..\..\..\win32\__VCVER__\lib\__TKNAM__.lib</ImportLibrary>
@@ -128,7 +129,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -138,7 +139,7 @@
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
       <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL32__
     </ClCompile>
@@ -173,7 +174,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -183,7 +184,7 @@
       <ProgramDataBaseFileName>.\..\..\..\win64\__VCVER__\obj\__TKNAM__/</ProgramDataBaseFileName>
       <WarningLevel>Level4</WarningLevel>
       <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL64__
     </ClCompile>
     <ResourceCompile>
@@ -195,6 +196,7 @@
       <OutputFile>.\..\..\..\win64\__VCVER__\bin\__TKNAM__.dll</OutputFile>
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\lib;$(CSF_OPT_LIB64);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <GenerateDebugInformation>No</GenerateDebugInformation>
       <ProgramDatabaseFile>.\..\..\..\win64\__VCVER__\bin\__TKNAM__.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
       <ImportLibrary>..\..\..\win64\__VCVER__\lib\__TKNAM__.lib</ImportLibrary>
@@ -216,7 +218,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -226,7 +228,7 @@
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
       <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL64__
     </ClCompile>

adm/templates/template.vc10x

@@ -85,7 +85,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -95,7 +95,7 @@
       <ProgramDataBaseFileName>.\..\..\..\win32\__VCVER__\obj\__XQTNAM__/</ProgramDataBaseFileName>
       <WarningLevel>Level4</WarningLevel>
       <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL32__
     </ClCompile>
     <ResourceCompile>
@@ -106,6 +106,7 @@
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\lib;$(CSF_OPT_LIB32);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <GenerateDebugInformation>No</GenerateDebugInformation>
       <ProgramDatabaseFile>.\..\..\..\win32\__VCVER__\bin\__XQTNAM__.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
       <ImportLibrary>..\..\..\win32\__VCVER__\lib\__XQTNAM__.lib</ImportLibrary>
@@ -127,7 +128,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -137,7 +138,7 @@
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
       <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL32__
     </ClCompile>
@@ -171,7 +172,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -181,7 +182,7 @@
       <ProgramDataBaseFileName>.\..\..\..\win64\__VCVER__\obj\__XQTNAM__/</ProgramDataBaseFileName>
       <WarningLevel>Level4</WarningLevel>
       <SuppressStartupBanner>true</SuppressStartupBanner>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL64__
     </ClCompile>
     <ResourceCompile>
@@ -192,6 +193,7 @@
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\lib;$(CSF_OPT_LIB64);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+      <GenerateDebugInformation>No</GenerateDebugInformation>
       <ProgramDatabaseFile>.\..\..\..\win64\__VCVER__\bin\__XQTNAM__.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
       <ImportLibrary>..\..\..\win64\__VCVER__\lib\__XQTNAM__.lib</ImportLibrary>
@@ -213,7 +215,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -223,7 +225,7 @@
       <SuppressStartupBanner>true</SuppressStartupBanner>
       <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
       <CompileAs>Default</CompileAs>
-      <DisableSpecificWarnings>4996;%(DisableSpecificWarnings)</DisableSpecificWarnings>
+      <DisableSpecificWarnings>%(DisableSpecificWarnings)</DisableSpecificWarnings>
       <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
       <FloatingPointModel>Precise</FloatingPointModel>__VCMPL64__
     </ClCompile>

adm/templates/template.vc8

@@ -50,7 +50,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -62,7 +62,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win32\vc8\obj\__TKNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 				EnableEnhancedInstructionSet="2"
 			/>
 			<Tool
@@ -149,7 +148,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -163,7 +162,6 @@
 				Detect64BitPortabilityProblems="false"
 				DebugInformationFormat="3"
 				CompileAs="0"
-				DisableSpecificWarnings="4996"
 				EnableEnhancedInstructionSet="2"
 			/>
 			<Tool
@@ -251,7 +249,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -263,7 +261,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win64\vc8\obj\__TKNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -350,7 +347,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -364,7 +361,6 @@
 				Detect64BitPortabilityProblems="false"
 				DebugInformationFormat="3"
 				CompileAs="0"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"

adm/templates/template.vc8x

@@ -49,7 +49,7 @@
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__;"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -60,7 +60,6 @@
 				WarningLevel="4"
 				SuppressStartupBanner="true"
 				DebugInformationFormat="3"
-				DisableSpecificWarnings="4996"
 				EnableEnhancedInstructionSet="2"
 			/>
 			<Tool
@@ -146,7 +145,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -157,7 +156,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win32\vc8\obj\__XQTNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 				EnableEnhancedInstructionSet="2"
 			/>
 			<Tool
@@ -242,7 +240,7 @@
 				AdditionalOptions="/favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -253,7 +251,6 @@
 				WarningLevel="4"
 				SuppressStartupBanner="true"
 				DebugInformationFormat="3"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -340,7 +337,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -351,7 +348,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win64\vc8\obj\__XQTNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"

adm/templates/template.vc9

@@ -52,7 +52,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -65,7 +65,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win32\vc9\obj\__TKNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -150,7 +149,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -165,7 +164,6 @@
 				Detect64BitPortabilityProblems="false"
 				DebugInformationFormat="3"
 				CompileAs="0"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -248,7 +246,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -260,7 +258,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win64\vc9\obj\__TKNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -343,7 +340,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -357,7 +354,6 @@
 				Detect64BitPortabilityProblems="false"
 				DebugInformationFormat="3"
 				CompileAs="0"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"

adm/templates/template.vc9x

@@ -52,7 +52,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -64,7 +64,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win32\vc9\obj\__XQTNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -144,7 +143,7 @@
 				AdditionalOptions="-MP"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -156,7 +155,6 @@
 				WarningLevel="4"
 				SuppressStartupBanner="true"
 				DebugInformationFormat="3"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -238,7 +236,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -249,7 +247,6 @@
 				ProgramDataBaseFileName=".\..\..\..\win64\vc9\obj\__XQTNAM__/"
 				WarningLevel="4"
 				SuppressStartupBanner="true"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -330,7 +327,7 @@
 				AdditionalOptions="-MP -favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -341,7 +338,6 @@
 				WarningLevel="4"
 				SuppressStartupBanner="true"
 				DebugInformationFormat="3"
-				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"

adm/upgrade.tcl

@@ -477,6 +477,77 @@ proc ConvertTColFwd {thePackagePath theHeaderExtensions} {
   }
 }
 
+# try to find source file corresponding to the specified header and either
+# inject macro IMPLEMENT_STANDARD_RTTIEXT in it, or check it already present,
+# and depending on this, return suffix to be used for corresponding macro
+# DEFINE_STANDARD_RTTI... (either inline or out-of-line variant)
+proc DefineExplicitRtti {hxxfile class base theSourceExtensions} {
+  # if current file is not a header (by extension), exit with "inline" variant
+  # (there is no need to bother with out-of-line instantiations for local class)
+  set ext [string range [file extension $hxxfile] 1 end]
+  if { [lsearch -exact [split $theSourceExtensions ,] $ext] >=0 } {
+    return "_INLINE"
+  }
+
+  # try to find source file with the same name but source-type extension 
+  # in the same folder
+  set filename [file rootname $hxxfile]
+  foreach ext [split $theSourceExtensions ,] {
+#    puts "Checking ${filename}.$ext"
+    if { ! [file readable ${filename}.$ext] } { continue }
+
+    # check the file content
+    set aFileContent [ReadFileToList ${filename}.$ext aFileRawContent aEOL]
+
+    # try to find existing macro IMPLEMENT_STANDARD_RTTIEXT and check that 
+    # it is consistent
+    foreach line $aFileContent {
+      if { [regexp "^\\s*IMPLEMENT_STANDARD_RTTIEXT\\s*\\(\\s*$class\\s*,\\s*(\[A-Za-z0-9_\]+)\\s*\\)" $line res impl_base] } {
+        # implementation is in place, just report warning if second argument
+        # is different
+        if { $base != $impl_base } {
+          logwarn "Warning in ${filename}.$ext: second argument of macro"
+          logwarn "        IMPLEMENT_STANDARD_RTTIEXT($class,$impl_base)"
+          logwarn "        is not the same as detected base class, $base"
+        }
+        return "EXT"
+      }
+    }
+
+    # inject a new macro before the first non-empty, non-comment, and 
+    # non-preprocessor line
+    set aNewFileContent {}
+    set injected 0
+    set inc_found 0
+    foreach line $aFileContent {
+      if { ! $injected } {
+        # add macro before first non-empty line after #includes
+        if { [regexp {^\s*$} $line] } {
+        } elseif { [regexp {^\s*\#\s*include} $line] } {
+          set inc_found 1
+        } elseif { $inc_found } {
+          set injected 1
+          lappend aNewFileContent "IMPLEMENT_STANDARD_RTTIEXT($class,$base)"
+          if { ! [regexp "^IMPLEMENT_" $line] } {
+            lappend aNewFileContent ""
+          }
+        }
+      }
+      lappend aNewFileContent $line
+    }
+    if { ! $injected } {
+      lappend aNewFileContent "IMPLEMENT_STANDARD_RTTIEXT($class,$base)"
+    }
+    SaveListToFile ${filename}.$ext $aNewFileContent $aEOL
+
+    return "EXT"
+  }
+
+  logwarn "Warning in ${hxxfile}: cannot find corresponding source file,"
+  logwarn "           will use inline version of DEFINE_STANDARD_RTTI"
+  return "_INLINE"
+}
+
 # Parse source files and:
 #
 # - add second argument to macro DEFINE_STANDARD_RTTI specifying first base 
@@ -521,13 +592,14 @@ proc ConvertRtti {theProcessedPath theIncPaths theCheckMode theCompatibleMode \
 
     # find all instances of DEFINE_STANDARD_RTTI with single or two arguments
     set index 0
-    set pattern_rtti {^(\s*DEFINE_STANDARD_RTTI\s*)\(\s*([A-Za-z_0-9,\s]+)\s*\)}
+    set pattern_rtti {^(\s*DEFINE_STANDARD_RTTI)([_A-Z]+)?\s*\(\s*([A-Za-z_0-9,\s]+)\s*\)}
     while { [regexp -start $index -indices -lineanchor $pattern_rtti \
-                    $aProcessedFileContent location start clist] } {
+                    $aProcessedFileContent location start suffix clist] } {
       set index [lindex $location 1]
 
-      set start [eval string range \$aProcessedFileContent $start]
-      set clist [split [eval string range \$aProcessedFileContent $clist] ,]
+      set start  [eval string range \$aProcessedFileContent $start]
+      set suffix [eval string range \$aProcessedFileContent $suffix]
+      set clist  [split [eval string range \$aProcessedFileContent $clist] ,]
 
       if { [llength $clist] == 1 } {
         set class [string trim [lindex $clist 0]]
@@ -538,7 +610,8 @@ proc ConvertRtti {theProcessedPath theIncPaths theCheckMode theCompatibleMode \
               logwarn "macro DEFINE_STANDARD_RTTI is changed assuming it inherits $inherits($class), please check!"
             }
             set change_flag 1
-            ReplaceSubString aProcessedFileContent $location "${start}($class, $inherits($class))" index
+            ReplaceSubString aProcessedFileContent $location \
+                             "${start}EXT($class,$inherits($class))" index
           }
         } else {
           logwarn "Error in $aProcessedFile: Macro DEFINE_STANDARD_RTTI used for class $class whose declaration is not found in this file, cannot fix"
@@ -548,12 +621,19 @@ proc ConvertRtti {theProcessedPath theIncPaths theCheckMode theCompatibleMode \
         set base  [string trim [lindex $clist 1]]
         if { ! [info exists inherits($class)] } {
           logwarn "Warning in $aProcessedFile: Macro DEFINE_STANDARD_RTTI used for class $class whose declaration is not found in this file"
-        } elseif { $base != $inherits($class) } {
+        } elseif { $base != $inherits($class) && ! [info exists inherits($class,multiple)] } {
           logwarn "Warning in $aProcessedFile: Second argument in macro DEFINE_STANDARD_RTTI for class $class is $base while $class seems to inherit from $inherits($class)"
-          if { ! $theCheckMode && ! [info exists inherits($class,multiple)] } {
-            set change_flag 1
-            ReplaceSubString aProcessedFileContent $location "${start}($class, $inherits($class))" index
-          }
+        }
+        # convert intermediate version of macro DEFINE_STANDARD_RTTI
+        # with two arguments to either _INLINE or EXT variant
+        if { ! $theCheckMode && "$suffix" == "" } {
+          set change_flag 1
+          # try to inject macro IMPLEMENT_STANDARD_RTTIEXT in the 
+          # corresponding source file (or check it already present),
+          # and depending on this, use either inline or out-of-line variant
+          set rtti_suffix [DefineExplicitRtti $aProcessedFile $class $base $theSourceExtensions]
+          ReplaceSubString aProcessedFileContent $location \
+                           "${start}${rtti_suffix}($class,$base)" index
         }
       }
     }
@@ -578,8 +658,12 @@ proc ConvertRtti {theProcessedPath theIncPaths theCheckMode theCompatibleMode \
       set index 0
       set first_newline \n\n
       set pattern_implement {\\?\n\s*IMPLEMENT_(DOWNCAST|STANDARD_[A-Z_]+|HARRAY1|HARRAY2|HUBTREE|HEBTREE|HSEQUENCE)\s*\([A-Za-z0-9_ ,]*\)\s*;?}
-      while { [regexp -start $index -indices -lineanchor $pattern_implement $aProcessedFileContent location] } {
+      while { [regexp -start $index -indices -lineanchor $pattern_implement $aProcessedFileContent location macro] } {
         set index [lindex $location 1]
+        # macro IMPLEMENT_STANDARD_RTTIEXT is retained
+        if { [eval string range \$aProcessedFileContent $macro] == "STANDARD_RTTIEXT" } {
+          continue
+        }
         if { ! $theCheckMode } {
           set change_flag 1
           ReplaceSubString aProcessedFileContent $location $first_newline index
@@ -594,7 +678,7 @@ proc ConvertRtti {theProcessedPath theIncPaths theCheckMode theCompatibleMode \
 
     # find all uses of macro STANDARD_TYPE and method DownCast and ensure that
     # argument class is explicitly included
-    set pattern_incbeg {\s*#\s*include\s*[\"<]\s*}
+    set pattern_incbeg {\s*#\s*include\s*[\"<]\s*([A-Za-z0-9_/]*/)?}
     set pattern_incend {[.][a-zA-Z]+\s*[\">]}
     set index 0
     set addtype {}
@@ -622,7 +706,9 @@ proc ConvertRtti {theProcessedPath theIncPaths theCheckMode theCompatibleMode \
       if { ! $theCheckMode } {
         set addinc ""
         foreach type $addtype {
-          append addinc "\n#include <$type.hxx>"
+          if { "$aProcessedFileName" != "$type.hxx" } {
+            append addinc "\n#include <$type.hxx>"
+          }
         }
         if { [regexp -indices ".*\n${pattern_incbeg}\[A-Za-z0-9_/\]+${pattern_incend}" $aProcessedFileContent location] } {
           set change_flag 1
@@ -649,6 +735,7 @@ proc ConvertHandle {theTargetPath theIncPaths theCheckMode theExtensions} {
 
   # iterate by header files
   foreach aHeader [glob -nocomplain -type f -directory $theTargetPath *.{$theExtensions}] {
+    set aCurrentHeaderName [file tail $aHeader]
 
     # skip gxx files, as names Handle_xxx used there are in most cases 
     # placeholders of the argument types substituted by #define
@@ -682,8 +769,9 @@ proc ConvertHandle {theTargetPath theIncPaths theCheckMode theExtensions} {
       set anUpdatedHeaderContent {}    
       set pattern_handle {\mHandle_([A-Za-z0-9_]+)}
       foreach line $aHeaderContent {
-        # do not touch #include and #if... statements
-        if { [regexp {\s*\#\s*include} $line] || [regexp {\s*\#\s*if} $line] } {
+        # do not touch typedefs, #include, and #if... statements
+        if { [regexp {^\s*typedef} $line] || 
+             [regexp {^\s*\#\s*include} $line] || [regexp {^\s*\#\s*if} $line] } {
           lappend anUpdatedHeaderContent $line
           continue
         }
@@ -763,8 +851,8 @@ proc ConvertHandle {theTargetPath theIncPaths theCheckMode theExtensions} {
         } else {
           # replace by forward declaration of a class or its include unless 
           # it is already declared or included
-          if { ! [regexp "^\s*\#\s*include\s*\[\<\"\]\s*$aForwardDeclHandledClass\s*\[\>\"\]" $aHeaderContent] } {
-            if { $isQObject } {
+          if { ! [regexp "\#\\s*include\\s*\[\<\"\]\\s*(\[A-Za-z0-9_/\]*/)?$aForwardDeclHandledClass\[.\]hxx\\s*\[\>\"\]" $aHeaderContent] } {
+            if { $isQObject && "$aCurrentHeaderName" != "${aForwardDeclHandledClass}.hxx" } {
               lappend anUpdatedHeaderContent "#include <${aForwardDeclHandledClass}.hxx>"
               if { ! [SearchForFile $theIncPaths ${aForwardDeclHandledClass}.hxx] } {
                 loginfo "Warning: include ${aForwardDeclHandledClass}.hxx added in $aHeader, assuming it exists and defines Handle_$aForwardDeclHandledClass"
@@ -946,7 +1034,10 @@ proc ConvertCStyleHandleCast {pkpath theExtensions theCheckMode} {
     while { [regexp -start $index -indices -lineanchor $pattern_refcast0 $hxx location class var] } {
       set index [lindex $location 1]
 
-      logwarn "Warning in $afile: C-style cast: [eval string range \$hxx $location]"
+      set var   [eval string range \$hxx $var]
+      if { "$var" != "const" && "$var" != "Standard_OVERRIDE" } {
+        logwarn "Warning in $afile: C-style cast: [eval string range \$hxx $location]"
+      }
     }
 
     # replace const Handle(A)& a = Handle(B)::DownCast (b); by 
@@ -1069,21 +1160,14 @@ proc ReadFileToList {theFilePath theFileContent theFileEOL} {
   set aFileContent [read $aFile]
   close $aFile
 
-  set aFileEOL "\r"
-  if [regexp "\r\n" $aFileContent] {
+  # detect DOS end-of-lines
+  if { [regexp "\r\n" $aFileContent] } {
     set aFileEOL "\r\n"
-  } elseif [regexp "\n" $aFileContent] {
+    set aList [split [regsub -all "\r\n" $aFileContent "\n"] "\r\n"]
+  } else {
+    # standard UNIX end-of-lines
     set aFileEOL "\n"
-  }
-
-  # convert to unix eol
-  if {"$aFileEOL" != "\n"} {
-    regsub -all {$aFileEOL} $aFileContent "\n" aFileContent
-  }
-
-  set aList {}
-  foreach aLine [split $aFileContent "\n"] {
-    lappend aList [string trimright $aLine]
+    set aList [split $aFileContent "\n"]
   }
 
   return $aList
@@ -1154,6 +1238,8 @@ proc SaveListToFile {theFilePath theData {theEOL "auto"}} {
   fconfigure $aFile -translation binary
   puts -nonewline $aFile [join $theData $anUsedEol]
   close $aFile
+
+  loginfo "File $theFilePath modified"
 }
 
 # collect all subdirs of theBaseDir

adm/upgrade_sample_orig.dat

@@ -0,0 +1,67 @@
+// This is sample C++ file intended for testing and verifyig automatic upgrade 
+// script. Copy it with extension .cxx and apply upgrade procedure to see
+// the result, as follows:
+// > upgrade.bat -src=./adm -inc=./src -recurse -all
+
+// Include of Geom_Line.hxx and Geom_Plane.hxx should be added below
+#include <gp.hxx>
+
+//========================================================================
+// OCCT 7.0
+//========================================================================
+
+//------------------------------------------------------------------------
+// Option -rtti
+//------------------------------------------------------------------------
+
+// Should be replaced by <Standard_Type.hxx>
+#include <Standard_DefineHandle.hxx>
+
+class A_0
+{
+}
+
+class B_1 : 
+public A_0
+{
+  // second argument "A_0" should be added
+  DEFINE_STANDARD_RTTI(B_1)
+};
+
+class C_2 : public Standard_Transient, B_1
+{
+  // second argument "Standard_Transient" should be added
+  DEFINE_STANDARD_RTTI(C_2)
+};
+
+void for_rtti ()
+{
+  Handle(Geom_Curve) aCurve = new Geom_Line (gp::Origin(), gp::DZ());
+  Handle(Geom_Line) aLine = Handle(Geom_Line)::DownCast (aCurve);
+}
+
+// should be removed
+IMPLEMENT_DOWNCAST(A)
+IMPLEMENT_STANDARD_RTTIEXT(A, B)
+
+//------------------------------------------------------------------------
+// Option -fwd
+//------------------------------------------------------------------------
+
+// force safe mode used for Qt objects
+Q_OBJECT
+slots:
+
+// these includes should be recognized as corresponding to forward declarations 
+#include <occt/TColStd_HArray1OfReal.hxx>
+
+// these declarations should be just removed
+class Handle(TColStd_HArray1OfReal);
+
+// should be replaced by include of corresponding header
+class TColStd_Array1OfReal;
+class Handle(Geom_Curve);
+
+// check that trailing spaces at the following line are preserved
+void ff();       
+

dox/CMakeLists.txt

@@ -37,12 +37,10 @@ set (OCCT_CONFIG_FOR_DOXYGEN "${OCCT_GENERATED_DOC_DIR}/occt.cfg")
 
 set (3RDPARTY_MATHJAX_RELATIVE_PATH "http://cdn.mathjax.org/mathjax/latest")
 
-OCCT_VERSION (OCCT_SOURCE_VERSION)
-
 configure_file ("${OCCT_OVERVIEW_RESOURCE_DIR}/occt_ug_html.doxyfile" "${OCCT_CONFIG_FOR_DOXYGEN}" COPYONLY)
 
 # Add common options for generation of Overview and User Guides
-file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nPROJECT_NUMBER         = ${OCCT_SOURCE_VERSION}")
+file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nPROJECT_NUMBER         = ${OCC_VERSION_STRING_EXT}")
 file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nOUTPUT_DIRECTORY       = ${OCCT_GENERATED_OVERVIEW_DIR}/.")
 file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nPROJECT_LOGO           = ${OCCT_OVERVIEW_DIR}/resources/occ_logo.png")
 

dox/FILES_HTML.txt

@@ -32,9 +32,6 @@ user_guides/ocaf/ocaf.md
 user_guides/tobj/tobj.md
 user_guides/draw_test_harness/draw_test_harness.md
 user_guides/brep_wp/brep_wp.md
-user_guides/ocaf_functionmechanism_wp/ocaf_functionmechanism_wp.md
-user_guides/ocaf_tree_wp/ocaf_tree_wp.md
-user_guides/ocaf_wp/ocaf_wp.md
 user_guides/vis/vis.md
 
 dev_guides/dev_guides.md
@@ -50,8 +47,6 @@ dev_guides/building/building.md
 dev_guides/building/3rdparty/3rdparty_windows.md
 dev_guides/building/3rdparty/3rdparty_linux.md
 dev_guides/building/3rdparty/3rdparty_osx.md
-dev_guides/building/wok/wok.md
-dev_guides/building/automake.md
 dev_guides/building/cmake/cmake.md
 dev_guides/building/android/android.md
 dev_guides/building/code_blocks.md

dox/FILES_PDF.txt

@@ -12,9 +12,6 @@ user_guides/modeling_algos/modeling_algos.md
 user_guides/boolean_operations/boolean_operations.md
 user_guides/shape_healing/shape_healing.md
 user_guides/ocaf/ocaf.md
-user_guides/ocaf_functionmechanism_wp/ocaf_functionmechanism_wp.md
-user_guides/ocaf_tree_wp/ocaf_tree_wp.md
-user_guides/ocaf_wp/ocaf_wp.md
 user_guides/step/step.md
 user_guides/draw_test_harness/draw_test_harness.md
 user_guides/tobj/tobj.md

dox/dev_guides/building/3rdparty/3rdparty_linux.md

@@ -10,7 +10,7 @@ products used by Open CASCADE Technology and samples on Linux platform.
 
 The links for downloading the third-party products are available on the web site 
 of OPEN CASCADE SAS at 
-http://www.opencascade.org/getocc/require/. 
+http://www.opencascade.com/content/3rd-party-components. 
 
 There are two types of third-party products, which are  necessary to build OCCT: 
   

dox/dev_guides/building/3rdparty/3rdparty_osx.md

@@ -8,8 +8,7 @@ This document presents additional guidelines for building third-party products
 used by Open CASCADE Technology and samples on Mac OS X platform (10.6.4  and later). 
 
 The links for downloading the third-party products are available 
-on the web site of OPEN CASCADE SAS at 
-http://www.opencascade.org/getocc/require/</a>. 
+on the web site of OPEN CASCADE SAS at http://www.opencascade.com/content/3rd-party-components. 
 
 There are two types of third-party products, which are  necessary to build OCCT: 
   

dox/dev_guides/building/3rdparty/3rdparty_windows.md

@@ -8,15 +8,17 @@ This document presents guidelines for building third-party products used by Open
 
 You need to use the same version of MS Visual Studio for building all third-party products and OCCT itself, in order to receive a consistent set of run-time binaries. 
 
-The links for downloading the third-party products are available on the web site of OPEN CASCADE SAS at http://www.opencascade.org/getocc/require/. There are two types of third-party products used  by OCCT: 
+The links for downloading the third-party products are available on the web site of OPEN CASCADE SAS at http://www.opencascade.com/content/3rd-party-components.
+
+There are two types of third-party products used  by OCCT: 
 
 * Mandatory  products: 
-	* Tcl/Tk 8.5 - 8.6;
-	* FreeType 2.4.10 - 2.5.3.
+	* Tcl/Tk 8.5 -- 8.6;
+	* FreeType 2.4.10 -- 2.5.3.
 * Optional  products:
-	* TBB 3.x - 4.x;
-	* gl2ps 1.3.5 - 1.3.8;
-	* FreeImage 3.14.1 -3.16.0;
+	* TBB 3.x -- 4.x;
+	* gl2ps 1.3.5 -- 1.3.8;
+	* FreeImage 3.14.1 -- 3.16.0;
 	* VTK 6.1.0.
 
 It is recommended to create a separate new folder on your workstation, where you will unpack the downloaded archives of the third-party  products, and where you will build these products (for example, *c:\\occ3rdparty*). 
@@ -168,9 +170,9 @@ You can download its sources from  http://geuz.org/gl2ps/src/.
    As a result, you will get a folder named, for example, *3rdparty\\gl2ps-1.3.5-source*. 
 
    Rename it into <i>gl2ps-platform-compiler-building mode</i>, where 
-   * **platform** is *win32*  or *win64*; 
-   * **compiler** is *vc8*, *vc9* or *vc10*; 
-   * **building mode** - *opt*  (for release) or *deb* (for debug). 
+   * **platform** -- *win32*  or *win64*; 
+   * **compiler** -- *vc8*, *vc9* or *vc10*; 
+   * **building mode** -- *opt*  (for release) or *deb* (for debug). 
    
    For example, <i>gl2ps-win64-vc10-deb</i>
 
@@ -208,7 +210,7 @@ You can download its sources from  http://geuz.org/gl2ps/src/.
      @image html /dev_guides/building/3rdparty/images/3rdparty_image004.png 
      @image latex /dev_guides/building/3rdparty/images/3rdparty_image004.png 
 
-   * Select the generator (the compiler  and the target platform - 32 or 64 bit) in the pop-up window. 
+   * Select the generator (the compiler  and the target platform -- 32 or 64 bit) in the pop-up window. 
    
      @image html /dev_guides/building/3rdparty/images/3rdparty_image005.png 
      @image latex /dev_guides/building/3rdparty/images/3rdparty_image005.png 

dox/dev_guides/building/android/android.md

@@ -1,19 +1,21 @@
-Building with CMake and ADT for Android {#occt_dev_guides__building_android}
+Building with CMake for Android {#occt_dev_guides__building_android}
 ===================
 
 @tableofcontents
 
-This file describes the steps to build OCCT libraries from a complete source package
-with following tools:
-  - Generation of eclipse project files
-    - CMake v3.0+ http://www.cmake.org/cmake/resources/software.html
-    - Cross-compilation toolchain for CMake https://github.com/taka-no-me/android-cmake
-    - Android NDK rev.10+ https://developer.android.com/tools/sdk/ndk/index.html
-    - Make: MinGW v4.82+ for Windows, GNU Make vXX for Linux. http://sourceforge.net/projects/mingw/files/
-  - Building eclipse project files of OCCT
-    - Android Developer Tools (ADT) v22+ https://developer.android.com/sdk/index.html
+This article describes the steps to build OCCT libraries for Android from a complete source package
+with GNU make (makefiles) on Windows 7 and Ubuntu 15.10.
 
-## Generation of eclipse project files
+The steps on Windows and Ubuntu are similar. There is the only one difference: makefiles are built with mingw32-make
+on Windows and native GNU make on Ubuntu.
+
+Required tools (download and install if it is required):
+  - CMake v3.0+ http://www.cmake.org/cmake/resources/software.html
+  - Cross-compilation toolchain for CMake https://github.com/taka-no-me/android-cmake
+  - Android NDK rev.10+ https://developer.android.com/tools/sdk/ndk/index.html
+  - GNU Make: MinGW v4.82+ for Windows (http://sourceforge.net/projects/mingw/files/), GNU Make 4.0 for Ubuntu. 
+  
+## Generation of makefiles
 Run GUI tool provided by CMake: cmake-gui
 
 ### Tools configuration
@@ -22,21 +24,23 @@ Run GUI tool provided by CMake: cmake-gui
 
 @figure{/dev_guides/building/android/images/android_image001.png}
 
-Click **Configure** button. It opens the window with a drop-down list of generators supported by CMake project. - 
+Click **Configure** button. It opens the window with a drop-down list of generators supported by CMake project.
 
-Select "Eclipse CDT4 - MinGW MakeFiles" item from the list
+Select "MinGW MakeFiles" item from the list
   - Choose "Specify toolchain file for cross-compiling"
   - Click "Next"
 @figure{/dev_guides/building/android/images/android_image002.png}
-  - Specify the Toolchain file at next dialog by android.toolchain.cmake is contained by cross-compilation toolchain for CMake
+
+  - Specify a toolchain file at the next dialog by android.toolchain.cmake . It is contained by cross-compilation toolchain for CMake
   - Click "Finish"
 @figure{/dev_guides/building/android/images/android_image003.png}
 
-Add cache entry ANDROID_NDK - path (entry type is PATH) to the NDK folder ("Add Entry" button)
+If ANDROID_NDK environment variable is not defined in current OS, add cache entry ANDROID_NDK (entry type is PATH) -- path to the NDK folder ("Add Entry" button)
 @figure{/dev_guides/building/android/images/android_image004.png}
 
-if there is message "CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles".  CMAKE_MAKE_PROGRAM is not set.  You probably need to select a different build tool."  
-Define CMAKE_MAKE_PROGRAM variable with the file path to mingw32-make executable. 
+If on Windows the message is appeared: "CMake Error: CMake was unable to find a build program corresponding to "MinGW Makefiles"
+CMAKE_MAKE_PROGRAM is not set.  You probably need to select a different build tool.",
+specify **CMAKE_MAKE_PROGRAM** to mingw32-make executable.
 @figure{/dev_guides/building/android/images/android_image005.png}
 
 ### OCCT Configuration
@@ -45,27 +49,36 @@ How to configure OCCT, see "OCCT Configuration" section of @ref occt_dev_guides_
 taking into account the specific configuration variables for android:
   - ANDROID_ABI = armeabi-v7a
   - ANDROID_NATIVE_API_LEVEL = 15
-  - ANDROID_NDK_LAYOUT is equal to BUILD_CONFIGURATION variable 
-  - CMAKE_ECLIPSE_VERSION is equal to installed eclipse version (e.g., 4.2)
-
-Configure parallel building:
-  - CMAKE_ECLIPSE_MAKE_ARGUMENTS = -jN where N = your numbers of CPU cores (threads)
+  - ANDROID_NDK_LAYOUT is equal to CMAKE_BUILD_TYPE variable
+  - **BUILD_MODULE_Draw = OFF**
 
 @figure{/dev_guides/building/android/images/android_image006.png}
 
-### Generation of eclipse projects files
+### Generation of makefiles
 
 Click **Generate** button and wait until the generation process is finished. 
-Then the eclipse project files will appear in the build folder (e.g. <i> D:/android-build-eclipse-api-15 </i>).
+Then makefiles will appear in the build folder (e.g. <i> D:/tmp/occt-android </i>).
 
-## Building eclipse project files of OCCT
+## Building makefiles of OCCT
 
-  - Open eclipse (downloaded ADT bundle contains it)
-  @figure{/dev_guides/building/android/images/android_image007.png}
-  - Import "Existing project into Workspace"
-  @figure{/dev_guides/building/android/images/android_image008.png}
-  @figure{/dev_guides/building/android/images/android_image009.png}
-  - Build ALL
-  @figure{/dev_guides/building/android/images/android_image010.png}
-  
-When the building process has finished, libraries are located in \<build folder\>/out (e.g. <i> D:/android-build-eclipse-api-15/out </i>).
+Open console and go to the build folder. Type "mingw32-make" (Windows) or "make" (Ubuntu) to start build process.
+
+> mingw32-make
+or
+> make
+
+
+Parallel building can be started with using **"-jN"** argument of "mingw32-make/make", where N is the number of building threads.
+
+> mingw32-make -j4
+or
+> make -j4
+
+## Install built OCCT libraries
+
+Type "mingw32-make/make" with argument "install" to place the libraries 
+to the install folder (see "OCCT Configuration" section of @ref occt_dev_guides__building_cmake "Building with CMake")
+
+> mingw32-make install
+or
+> make install

dox/dev_guides/building/automake.md

@@ -1,72 +0,0 @@
-Building with Automake {#occt_dev_guides__building_automake}
-======================
-
-This file describes steps to build OCCT libraries from a complete source
-archive on Linux with **Autotools** GNU build system.
-
-If you build OCCT from bare sources (as in Git repository), or do some 
-changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See paragraph 1 \ref occt_dev_guides__building_wok for instructions.
-
-Before building OCCT, you need to install the required third-party libraries; see paragraph 1 of 
-\ref occt_dev_guides__building for instructions.
-
-Note that during compilation by makefiles on Linux station with 
-NVIDIA video card you may experience problems because the installation 
-procedure of NVIDIA video driver removes library *libGL.so* included in package 
-*libMesaGL* from directory <i>/usr/X11R6/lib</i> and places this library *libGL.so* in 
-directory <i>/usr/lib</i>. However, *libtool* expects to find the library in directory 
-<i>/usr/X11R6/lib</i>, which causes compilation crash (See <i>/usr/X11R6/lib/libGLU.la </i>). 
-
-To prevent this, it is suggested to make links: 
-
-
-	ln -s /usr/lib/libGL.so /usr/X11R6/lib/libGL.so 
-	ln -s /usr/lib/libGL.la /usr/X11R6/lib/libGL.la 
-
-
-  1.In OCCT root folder, launch *build_configure* script to generate files *configure* and *Makefile.in* for your system.
-
-  2.Go to the directory, where OCCT will be built, and run *configure* to generate makefiles.
-
- 
-	$CASROOT/configure \<FLAGS\>
-
-   Where <i> \<FLAGS\> </i> is a set of options.
-   The following flags are mandatory:
-
-   * <i> --with-tcl= </i> defines the location of *tclConfig.sh*;
-   * <i> --with-tk= </i> defines location of *tkConfig.sh*;
-   * <i> --with-freetype= </i> defines location of installed **FreeType** product
-   * <i> --prefix= </i> defines the location for installation of OCCT binaries
-
-   Additional flags:
-
-   * <i> --with-gl2ps= </i> defines the location of installed **gl2ps** product;
-   * <i> --with-freeimage= </i> defines the location of installed **FreeImage** product;
-   * <i> --with-tbb-include= </i> defines the location of *tbb.h*;
-   * <i> --with-tbb-library= </i> defines the location of *libtbb.so*;
-   * <i> --with-vtk-include= </i> defines the location of VTK includes;
-   * <i> --with-vtk-library= </i> defines the location of VTK libraries;
-   * <i> --enable-debug=   yes: </i>  includes debug information, no: does not include debug information;
-   * <i> --enable-production=   yes: </i> switches code optimization, no: switches off code optimization;
-   * <i> --disable-draw </i> allows OCCT building without Draw.
-
-   If location of **FreeImage, TBB, gl2ps** or **VTK** is not specified, OCCT will be built without these optional libraries.
-
-   
-  Attention: 64-bit platforms are detected automatically.
-
-  Example:
-   
-
-  \>  ./configure -prefix=/PRODUCTS/occt-6.5.5 --with-tcl=/PRODUCTS/tcltk-8.5.8/lib --with-tk=/PRODUCTS/tcltk-8.5.8/lib --with-freetype=/PRODUCTS/freetype-2.4.10 --with-gl2ps=/PRODUCTS/gl2ps-1.3.5 --with-freeimage=/PRODUCTS/freeimage-3.14.1 --with-tbb-include=/PRODUCTS/tbb30_018oss/include --with-tbb-library=/PRODUCTS/tbb30_018oss/lib/ia32/cc4.1.0_libc2.4_kernel2.6.16.21 -–with-vtk-include=/PRODUCTS/VTK-6.1.0/include/vtk-6.1 –with-vtk-library=/PRODUCTS/ /VTK-6.1.0//lib
-
-
-  3.If configure exits successfully, you can build OCCT with *make* command.
-
-  \> make -j8 install
-
-  4.To start *DRAW*, launch
-
-  \> draw.sh

dox/dev_guides/building/building.md

@@ -1,25 +1,24 @@
 Building OCCT from sources {#occt_dev_guides__building}
 =========
 
-In order to build OCCT libraries from these sources for use in your program, 
-you need to:
+Before building OCCT, make sure to have all the required third-party libraries installed.
+The list of required libraries depends on what OCCT modules will be used, and your preferences.
+The typical minimum is **Freetype** (necessary for Visualization) and **Tcl/Tk** (for DRAW Test Harness).
+See "Third-party libraries" section in \ref OCCT_OVW_SECTION_5 "Overview" for a full list.
 
-1. Make sure you have all required third-party libraries installed (check 
-   software requirements in \ref OCCT_OVW_SECTION_5 "Overview").
+On Windows, the easiest way to install third-party libraries is to download archive with pre-built binaries from http://www.opencascade.com/content/3rd-party-components.
+On Linux and OS X, it is recommended to use the version installed in the system natively.
 
-   See the following documents for short guide to installation of 
-   third-party libraries on different platforms:
-   - \subpage occt_dev_guides__building_3rdparty_windows
-   - \subpage occt_dev_guides__building_3rdparty_linux
-   - \subpage occt_dev_guides__building_3rdparty_osx
+You can also build third-party libraries from their sources:
+* \subpage occt_dev_guides__building_3rdparty_windows
+* \subpage occt_dev_guides__building_3rdparty_linux
+* \subpage occt_dev_guides__building_3rdparty_osx
 
-
-2. Build using your preferred build tool.
-   - \subpage occt_dev_guides__building_automake "Building on Linux with Autotools"
-   - \subpage occt_dev_guides__building_cmake "Building with CMake (cross-platform)"
-   - \subpage occt_dev_guides__building_android "Building with CMake and ADT for Android (cross-platform)"
-   - \subpage occt_dev_guides__building_code_blocks "Building on Mac OS X with Code::Blocks"
-   - \subpage occt_dev_guides__building_msvc "Building on Windows with MS Visual Studio"
-   - \subpage occt_dev_guides__building_xcode "Building on Mac OS X with Xcode"
+Build OCCT using your preferred build tool.
+* \subpage occt_dev_guides__building_cmake "Building with CMake (cross-platform)"
+* \subpage occt_dev_guides__building_android "Building with CMake for Android (cross-platform)"
+* \subpage occt_dev_guides__building_msvc "Building on Windows with MS Visual Studio projects"
+* \subpage occt_dev_guides__building_code_blocks "Building on Mac OS X with Code::Blocks projects"
+* \subpage occt_dev_guides__building_xcode "Building on Mac OS X with Xcode projects"
 
 The current version of OCCT can be consulted in the file src/Standard/Standard_Version.hxx

dox/dev_guides/building/cmake/cmake.md

@@ -3,39 +3,23 @@ Building with CMake {#occt_dev_guides__building_cmake}
 
 @tableofcontents
 
-This article describes **CMake**-based build process which is now suggested as a standard way to produce the binaries of Open CASCADE Technology from sources. *OCCT requires CMake version 3.0 or later*.
+@section build_cmake_intro General
 
-**Note**: Comparing to the previous (6.x) releases of Open CASCADE Technology, OCCT 7.0 comes with a complete set of CMake scripts and projects, so that there is no need to use WOK anymore. Moreover, CMake gives you a powerful configuration tool which allows to control many aspects of OCCT deployment. At the same time this tool is quite intuitive which is a significant advantage over the legacy WOK utilities.
+This article describes **CMake**-based build process which is now suggested as a standard way to produce the binaries of Open CASCADE Technology from sources. *OCCT requires CMake version 2.8.12 or later*.
 
-**Note**: We discuss the build procedure on example of Windows platform. However, the workflow is almost the same for *nix and Mac operating systems.
+@note Comparing to the previous (6.x) releases of Open CASCADE Technology, OCCT 7.0 comes with a complete set of CMake scripts and projects, so that there is no need to use WOK anymore. Moreover, CMake gives you a powerful configuration tool which allows to control many aspects of OCCT deployment. At the same time this tool is quite intuitive which is a significant advantage over the legacy WOK utilities.
 
-All the examples in the article will be based on Windows x64 platform and Visual Studio 2010 solution will be the target IDE. The solution will be generated by CMake from the OCCT sources, the one will be built by an user and ready-to-go OCCT binaries will be deployed into a user specified directory by building *INSTALL* project.
+Here we describe the build procedure on example of Windows platform with Visual Studio 2010. 
+However, CMake is cross-platform and can be used to build OCCT on Linux and OS X in essentially the same way.
 
-You can get all the required 3-rd party products visiting [the official download page](http://www.opencascade.org/getocc/download/loadocc); see @ref occt_dev_guides__building for more detailed information also.
+@note Before you start, make sure to have installed all the 3-rd party products that you are going to use with OCCT; see @ref occt_dev_guides__building.
 
-## Get sources
+@section build_cmake_start Start CMake
 
-The sources of OCCT can be obtained from [the official development web-site](http://dev.opencascade.org) by either downloading the universal source package (available at [the official download page](http://www.opencascade.org/getocc/download/loadocc)) or by cloning the Git repository:
+CMake is a tool that generates the actual project files for the selected target build system (e.g. Unix makefiles) or IDE (e.g. Visual Studio 2010).
 
-    git clone ssh://gitolite@git.dev.opencascade.org/occt occt
-
-As a result, you obtain the following directory structure in your filesystem (d:\ name is used for example):
-    
-    d:\occt\adm
-           \data
-           \dox
-           \samples
-           \src
-           \tests
-           ...
-
-The bare sources distribution contains not only the sources of Open CASCADE Technology, but also documentation, samples and non-regression test scripts.
-
-## The usage of CMake
-
-Now it is time to run a CMake tool which will generate the actual project files for the target IDE (e.g., Visual Studio 2010 solution).
-
-It is recommended to use *cmake-gui* - cross-platform GUI tool provided by CMake on Windows, Mac and Linux. As a command-line alternative, *ccmake* also can be used.
+For unexpericnced users we recommend to start with *cmake-gui* -- cross-platform GUI tool provided by CMake on Windows, Mac and Linux.
+A command-line alternative, *ccmake* also can be used.
 
 CMake deals with three directories: source, build or binary and install.
 
@@ -43,17 +27,17 @@ CMake deals with three directories: source, build or binary and install.
 * The build or binary directory is where all the files created during CMake configuration and generation process will be located. The mentioned process will be described below.
 * The installation directory is where binaries will be installed after build the *INSTALL* project that is created by CMake generation process, along with header files and resources required for OCCT use in applications. 
 
-**Note**: It is possible to choose one installation directory for several configurations of OCCT (differentiated by platform, bitness, compiler and build type).
-
-**Note**: The good practice is not to mix up different build configurations in a single directory and not to use the source directory as a build one, for example:
+The good practice is not to use the source directory as a build one.
+Different configurations should be built in different build directories to avoid conflicts. 
+It is however possible to choose one installation directory for several configurations of OCCT (differentiated by platform, bitness, compiler and build type), for example:
       
-    d:/occt/                   - the source directory
-    d:/tmp/occt-build-vc10-x64 - the build directory with the generated
-                                 solution and other intermediate files created during a CMake tool working
-    d:/occt-install            - the installation directory that is
-                                 able to contain several OCCT configuratoion
+    d:/occt/                   -- the source directory
+    d:/tmp/occt-build-vc10-x64 -- the build directory with the generated
+                                  solution and other intermediate files created during a CMake tool working
+    d:/occt-install            -- the installation directory that is
+                                  able to contain several OCCT configuratoion
 
-## Configuration process
+@section build_cmake_conf Configuration process
 
 If the command-line tool is used, run the tool from the build directory with a single argument indicating the source (relative or absolute path) directory:
 
@@ -93,22 +77,23 @@ The following table enumerates the full list of environment variables used at co
 | CMAKE_BUILD_TYPE | String | Specifies the build type on single-configuration generators (sush as make).  Possible values are Debug, Release and RelWithDebInfo |
 | USE_FREEIMAGE | Boolean flag | Indicates whether Freeimage product should be used in OCCT visualization module for support of popular graphics image formats (PNG, BMP etc) |
 | USE_GL2PS | Boolean flag | Indicates whether GL2PS product should be used in OCCT visualization module for support of vector image formats (PS, EPS etc) |
-| USE_TBB | Boolean flag | Indicates whether TBB 3-rd party is used or not. TBB stands for Threading Building Blocks, the technology of Intel Corp, which comes with different mechanisms and patterns for injecting parallelism into your application. OCCT remains parallel even without TBB product |
-| USE_VTK | Boolean flag | Indicates whether VTK 3-rd party is used or not. VTK stands for Visualization ToolKit, the technology of Kitware Inc intended for general-purpose scientific visualization. OCCT comes with a bridge between CAD data representation and VTK by means of its dedicated VIS component (VTK Integration Services). You may skip this 3-rd party unless you are planning to use VTK visualization for OCCT geometry. The official documentation @ref occt_user_guides__vis for the details on VIS |
-| 3RDPARTY_DIR | Path | Defines the root directory where all required 3-rd party products will be searched. Once you define this path it is very convenient to click "Configure" button in order to let CMake automatically detect all necessary products|
+| USE_TBB | Boolean flag | Indicates whether TBB 3rd party is used or not. TBB stands for Threading Building Blocks, the technology of Intel Corp, which comes with different mechanisms and patterns for injecting parallelism into your application. OCCT remains parallel even without TBB product |
+| USE_VTK | Boolean flag | Indicates whether VTK 3rd party is used or not. VTK stands for Visualization ToolKit, the technology of Kitware Inc intended for general-purpose scientific visualization. OCCT comes with a bridge between CAD data representation and VTK by means of its dedicated VIS component (VTK Integration Services). You may skip this 3rd party unless you are planning to use VTK visualization for OCCT geometry. The official documentation @ref occt_user_guides__vis for the details on VIS |
+| 3RDPARTY_DIR | Path | Defines the root directory where all required 3rd party products will be searched. Once you define this path it is very convenient to click "Configure" button in order to let CMake automatically detect all necessary products|
 | 3RDPARTY_FREETYPE_* | Path | Path to Freetype binaries |
 | 3RDPARTY_TCL_* 3RDPARTY_TK_* | Path | Path to Tcl/Tk binaries |
 | 3RDPARTY_FREEIMAGE* | Path | Path to Freeimage binaries |
 | 3RDPARTY_GL2PS_* | Path | Path to GL2PS binaries |
 | 3RDPARTY_TBB* | Path | Path to TBB binaries |
 | 3RDPARTY_VTK_* | Path | Path to VTK binaries |
-| BUILD_MODULE_<MODULE>| Boolean flag | Indicates whether the corresponding OCCT module should be built or not. It should be noted that some toolkits of a module can be built even if this module is not checked (this happens if some other modules depend on these toolkits). The main modules and their descriptions can be found in @ref occt_user_guides |
+| BUILD_MODULE_<MODULE>| Boolean flag | Indicates whether the corresponding OCCT module should be built or not. It should be noted that some toolkits of a module can be built even if this module is not checked (this happens if some other modules depend on these toolkits). The main modules and their descriptions can be found in @ref user_guides |
 | BUILD_LIBRARY_TYPE | String |  Specifies the type of library to be created. "Shared" libraries are linked dynamically and loaded at runtime. "Static" libraries are archives of object files for use when linking other targets |
 | BUILD_ADDITIONAL_TOOLKITS | String | Semicolon-separated individual toolkits to include into build process. If you want to build some particular libraries (toolkits) only, then you may uncheck all modules in the corresponding *BUILD_MODUE_\<MODULE\>* options and provide the list of necessary libraries here. Of course, all dependencies will be resolved automatically |
-| REBUILD_PLATFORM_DEPENDENT_CODE | Boolean flag | Enables Flex/Bison lexical analyzers. OCCT source files relating to STEP reader and ExprIntrp functionality are generated automatically with Flex/Bison. Checking this options leads to automatic search of Flex/Bison binaries and regeneration of the mentioned files |
+| BUILD_YACCLEX | Boolean flag | Enables Flex/Bison lexical analyzers. OCCT source files relating to STEP reader and ExprIntrp functionality are generated automatically with Flex/Bison. Checking this options leads to automatic search of Flex/Bison binaries and regeneration of the mentioned files |
 | BUILD_MODULE_OcctMfcSamples | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
 | BUILD_DOC_OcctOverview | Boolean flag | Indicates whether OCCT overview documentation project should be created together with OCCT. It is not built together with OCCT. Checking this options leads to automatic search of Doxygen binaries. Building of it will be call Doxygen command to generate the documentation in HTML format |
-| APPLY_OCCT_PATH_DIR | Boolean flag | Points to the directory recognized as a "patch" for OCCT. If specified, the files from this directory take precedence over the corresponding native OCCT sources. This way you are able to introduce patches to Open CASCADE Technology not affecting the original source distribution |
+| BUILD_PATCH | Path | Points to the directory recognized as a "patch" for OCCT. If specified, the files from this directory take precedence over the corresponding native OCCT sources. This way you are able to introduce patches to Open CASCADE Technology not affecting the original source distribution |
+| BUILD_WITH_DEBUG | Boolean flag | Enables extended messages of many OCCT algorithms, usually printed to cout. These include messages on internal errors and special cases encountered, timing etc |
 | CMAKE_CONFIGURATION_TYPES | String | Semicolon-separated CMake configurations |
 | INSTALL_DIR | Path | Points to the installation directory |
 | INSTALL_FREETYPE | Boolean flag | Indicates whether Freetype binaries should be installed into the installation directory |
@@ -117,24 +102,24 @@ The following table enumerates the full list of environment variables used at co
 | INSTALL_TBB | Boolean flag | Indicates whether TBB binaries should be installed into the installation directory |
 | INSTALL_VTK | Boolean flag | Indicates whether VTK binaries should be installed into the installation directory |
 | INSTALL_TCL | Boolean flag | Indicates whether TCL binaries should be installed into the installation directory |
-| INSTALL_OCCT_TEST_CASES | Boolean flag | Indicates whether non-regression OCCT test scripts should be installed into the installation directory |
-| INSTALL_OCCT_SAMPLES | Boolean flag | Indicates whether OCCT samples should be installed into the installation directory |
+| INSTALL_TEST_CASES | Boolean flag | Indicates whether non-regression OCCT test scripts should be installed into the installation directory |
+| INSTALL_SAMPLES | Boolean flag | Indicates whether OCCT samples should be installed into the installation directory |
 | INSTALL_DOC_OcctOverview | Boolean flag | Indicates whether OCCT overview documentation should be installed into the installation directory |
 
 **Note:** In those CMake options defining paths only the forward slashes ("/") are acceptable.
 
-### 3rd-party search mechanism (The variables with <i>3RDPARTY_</i> prefix)
+@section build_cmake_3rdparty 3rd party search mechanism
 
-If *3RDPARTY_DIR* directory is defined, required 3rd-party binaries are sought in it, default system folders are ignored.
+If *3RDPARTY_DIR* directory is defined, then required 3rd party binaries are sought in it, and default system folders are ignored.
 
-The procedure expects to find binary and header files of each 3rd-party product in its own sub-directory: *bin*, *lib* and *include*.
+The procedure expects to find binary and header files of each 3rd party product in its own sub-directory: *bin*, *lib* and *include*.
 
 The result of the search (achived on the next pass of the configuration process) are recorded in the corresponding variables:
 
-* *3RDPARTY_\<PRODUCT\>_DIR* - path to the 3rdparty directory (with directory name) (e.g. <i>D:/3rdparty/tcltk-86-32</i>)
-* *3RDPARTY_\<PRODUCT\>_LIBRARY_DIR* - path to directory containing a library (e.g. <i>D:/3rdparty/tcltk-86-32/lib</i>). 
-* *3RDPARTY_\<PRODUCT\>_INCLUDE_DIR* - path to the directory containing a header file (e.g., <i>D:/3rdparty/tcltk-86-32/include</i>)
-* *3RDPARTY_\<PRODUCT\>_DLL_DIR* - path to the directory containing a shared library (e.g., <i>D:/3rdparty/tcltk-86-32/bin</i>) This variable is only relevant to Windows platforms
+* *3RDPARTY_\<PRODUCT\>_DIR* -- path to the 3rdparty directory (with directory name) (e.g. <i>D:/3rdparty/tcltk-86-32</i>)
+* *3RDPARTY_\<PRODUCT\>_LIBRARY_DIR* -- path to the directory containing a library (e.g. <i>D:/3rdparty/tcltk-86-32/lib</i>). 
+* *3RDPARTY_\<PRODUCT\>_INCLUDE_DIR* -- path to the directory containing a header file (e.g., <i>D:/3rdparty/tcltk-86-32/include</i>)
+* *3RDPARTY_\<PRODUCT\>_DLL_DIR* -- path to the directory containing a shared library (e.g., <i>D:/3rdparty/tcltk-86-32/bin</i>) This variable is only relevant to Windows platforms.
 
 Note: each library and include directory should be the children of product directory if the last one is defined.
 
@@ -166,11 +151,11 @@ During the configuration process the related variables (*3RDPARTY_FREETYPE_DLL_D
 
 **Note**: The names of searched libraries and header files are hard-coded. If there is the need to change their names, change appropriate cmake variables (edit CMakeCache.txt file or edit in cmake-gui in advance mode) without reconfiguration: *3RDPARTY_\<PRODUCT\>_INCLUDE* for include, *3RDPARTY_\<PRODUCT\>_LIB* for library and *3RDPARTY_\<PRODUCT\>_DLL* for shared library.
 
-### OCCT Generation
+@section build_cmake_gen Projects generation
 
 Once the configuration process is done, "Generate" button is used to prepare project files for the target IDE. In our exercise the Visual Studio solution will be automatically created in the buid directory.
 
-### OCCT Building
+@section build_cmake_build Building
 
 Go to the build folder, start the Visual Studio solution *OCCT.sln* and build it by clicking **Build -> Build Solution**.
 
@@ -184,7 +169,7 @@ When the building process is finished build:
 
 For this, right-click on the *Overview/INSTALL* project and select **Project Only -> Build Only** -> *Overview/INSTALL* in the solution explorer. 
 
-## Installation process
+@section build_cmake_install Installation
 
 Installation is a process of extracting redistributable resources (binaries,include files etc) from the build directory into the installation one. The installation directory will be free of project files, intermediate object files and any other information related to the build routines. 
 
@@ -192,14 +177,14 @@ Normally you use the installation directory of OCCT to link against your specifi
 
 the directory structure is follow:
     
-    data            - data files for OCCT (brep, iges, stp)
-    doc             - OCCT overview documentation in HTML format
-    inc             - header files
-    samples         - samples
-    src             - all required source files for OCCT
-    tests           - OCCT test suite
-    win32\vc10\bind - binary files (installed 3rdparties and occt)
-              \libd - libraries (installed 3rdparties and occt)
+    data            -- data files for OCCT (brep, iges, stp)
+    doc             -- OCCT overview documentation in HTML format
+    inc             -- header files
+    samples         -- samples
+    src             -- all required source files for OCCT
+    tests           -- OCCT test suite
+    win32\vc10\bind -- binary files (installed 3rdparties and occt)
+              \libd -- libraries (installed 3rdparties and occt)
 
 **Note:** The above example is given for debug configuration. However, it is generally safe to use the same installation directory for the release build. In the latter case the contents of install directory will be enriched with subdirectories and files related to the release configuration. In particular, the binaries directory win64 will be expanded as
 follows:
@@ -209,6 +194,6 @@ follows:
                \bin
                \lib
 
-If CMake installation flags are enabled for the 3-rd party products (e.g. INSTALL_FREETYPE), then the corresponding binaries will be copied to the same bin(d) and lib(d) directories together with the native binaries of OCCT. Such organization of libraries can be especially helpful if your OCCT-based software does not use itself the 3-rd parties of Open CASCADE Technology (thus, there is no sense to pack them into dedicated directories)
+If CMake installation flags are enabled for the 3rd party products (e.g. INSTALL_FREETYPE), then the corresponding binaries will be copied to the same bin(d) and lib(d) directories together with the native binaries of OCCT. Such organization of libraries can be especially helpful if your OCCT-based software does not use itself the 3rd parties of Open CASCADE Technology (thus, there is no sense to pack them into dedicated directories)
 
 The installation folder contains the scripts to run *DRAWEXE* (*draw.bat* or *draw.sh*), samples (if its were installed) and overview.html (short-cut for installed OCCT overview documentation).

dox/dev_guides/building/code_blocks.md

@@ -1,70 +1,58 @@
-Building with Code::Blocks on Mac OS X {#occt_dev_guides__building_code_blocks}
-======================================
+Building with Code::Blocks {#occt_dev_guides__building_code_blocks}
+==========================
 
-This file describes steps to build OCCT libraries from a complete source package
-on Mac OS X with **Code::Blocks**.
+@tableofcontents
 
-If you build OCCT from bare sources (as in Git repository) or do some 
-changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See \ref occt_dev_guides__building_wok for instructions.
+@section build_codeblocks_intro General
 
-Before building OCCT, you need to install the required third-party libraries; see
-paragraph 1 of \ref occt_dev_guides__building for details.
+This file describes steps to build OCCT libraries from sources using **Code::Blocks**, a cross-platform IDE, using project files generated by OCCT legacy tool **genproj**.
+It can be an alternative to use of CMake build system (see @ref occt_dev_guides__building_cmake) for all supported platforms.
 
-1. Add paths to the mandatory 3rd-party products (**Tcl/Tk** and **FreeType**) in file 
-   *custom.sh* located in <i>\<OCCT_ROOT_DIR\></i>. For this:
+@section build_codeblocks_3rdparty Third-party libraries
 
-   1.1. Add paths to the includes in variable *CSF_OPT_INC*;
+Before building OCCT, make sure to have all the needed third-party libraries installed, see @ref occt_dev_guides__building.
 
-   1.2. Add paths to the binary libraries in variable  *CSF_OPT_LIB64*;
-   
-   All paths should be separated by ":" symbol. 
+@section build_codeblocks_conf Configuration
 
-2. Add paths to the optional 3rd-party libraries (**TBB, gl2ps** and **FreeImage**) 
-   in the aforementioned environment variables *CSF_OPT_INC* and 
-   *CSF_OPT_LIB64* from file *custom.sh*.
+Before building it is necessary to set up build environment.
 
-   If you want to build OCCT without the optional libraries perform the 
-   following steps:
+The environment is defined in the file *custom.sh* (on Linux and OS X) or *custom.bat* (on Windows) which can be edited directly:
 
-   2.1 Disable unnecessary library in custom.sh by setting the corresponding 
-       variable <i>HAVE_\<LIBRARY_NAME\></i> to *false*. 
-
-~~~~~	   
-export HAVE_GL2PS=false
+* Add paths to includes of used third-party libraries in variable *CSF_OPT_INC*. 
+* Add paths to their binary libraries in variable  *CSF_OPT_LIB64*.
+* Set variable *SHORTCUT_HEADERS* to "true" to have folder *inc* populated by short-cut files pointing to actual headers located in *src*; otherwise, header files will be copied to *inc*.
+* For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
+~~~~~
+       export HAVE_GL2PS=false
 ~~~~~
 
-   2.2 Remove this library from Linker settings in **Code::Blocks** for each project 
-       that uses it: right click on the required project, choose **Build options**, 
-       go to **Linker settings** tab in the opened window , select unnecessary 
-       libraries and click **Delete** button.
+Alternatively, or when *custom.sh* or *custom.bat* does not exist, you can launch **genconf** tool to configure environment interactively:
 
-3. Open Terminal application
+@figure{/dev_guides/building/3rdparty/images/genconf_linux.png}
 
-4. Enter <i> \<OCCT_ROOT_DIR\></i>:
+Click "Save" to store the specified configuration in *custom.sh* or *custom.bat* file.
+  
+@section build_codeblocks_gen Projects generation
+
+Launch **genproj** tool with option *-target=cbp* to update content of *inc* folder and generate project files after changes in OCCT code affecting layout or composition of source files:
 
 ~~~~~
-   cd \<OCCT_ROOT_DIR\>
+  $ cd /dev/OCCT/opencascade-7.0.0
+  $ ./genproj.sh -target=cbp
 ~~~~~
 
-5. To start **Code::Blocks**, run the command <i>/codeblocks.sh</i>
+The generated Code::Blocks project are placed into subfolder *adm/&lt;OS&gt;/cbp*.
 
-6. To build all toolkits, click **Build->Build workspace** in the menu bar.
+@note To use **genproj** and **genconf** tools you need to have Tcl installed and accessible by PATH.
 
+@section build_codeblocks_build Building
 
-To start *DRAWEXE*, which has been built with **Code::Blocks** on Mac OS X, perform 
-the following steps:
+To start **Code::Blocks**, launch script *codeblocks.sh*.
 
-1.Open Terminal application
+To build all toolkits, click **Build->Build workspace** in the menu bar.
 
-2.Enter <i>\<OCCT_ROOT_DIR\></i>:
-
-~~~~~
-   cd \<OCCT_ROOT_DIR\>
-~~~~~
-
-3.Run the script
+To start *DRAWEXE*, which has been built with **Code::Blocks** on Mac OS X, run the script
 ~~~~~
    ./draw_cbp.sh cbp [d]
 ~~~~~
-   Option *d* is used if OCCT has been built in **Debug** mode.
+Option *d* is used if OCCT has been built in **Debug** mode.

dox/dev_guides/building/msvc.md

@@ -1,35 +1,68 @@
 Building with MS Visual C++ {#occt_dev_guides__building_msvc}
 ===========================
 
-This file describes steps to build OCCT libraries from a complete source
-archive on Windows with <b>MS Visual C++</b>. 
+@tableofcontents
 
-If you build OCCT from bare sources (as in Git repository) or do some 
-changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See \ref occt_dev_guides__building_wok for instructions.
+@section build_msvc_intro General
 
-Before building OCCT, you need to install the required third-party libraries; see
-paragraph 1 of \ref occt_dev_guides__building for instructions.
+This page describes steps to build OCCT libraries from a complete source archive on Windows with <b>MS Visual C++</b> using projects generated by **genproj** tool. 
+It is an alternative to use of CMake build system (see @ref occt_dev_guides__building_cmake).
 
-1. Edit file *custom.bat* to define the environment: 
+**genproj** is a legacy tool (originated from command "wgenproj" in WOK) for generation of Visual Studio, Code.Blocks, and XCode project files used for building Open CASCADE Technology.
+These project files are placed inside OCCT directory (in *adm* subfolder) and use relative paths, thus can be moved together with sources.
 
-   - *VCVER* - version of Visual Studio (vc8, vc9, vc10, vc11 or vc12), 
-             and relevant *VCVARS* path
-   - *ARCH* - architecture (32 or 64), affects only *PATH* variable for execution
-   - <i>HAVE_*</i> - flags to enable or disable use of optional third-party products
-   - CSF_OPT_* - paths to search for includes and binaries of all used 
-                 third-party products
+The project files included in official distribution of OCCT are generated by this tool.
+If you have official distribution with project files included, you can use them directly without a need to call **genproj**.
 
-2. Launch *msvc.bat* to start Visual Studio with all necessary environment 
-   variables defined.
+@section build_msvc_3rdparty Third-party libraries
 
-   Note: the MSVC project files are located in folders <i>adm\\msvc\\vc[9-12]</i>.
-   Binaries are produced in *win32* or *win64* folders.
+Before building OCCT, make sure to have all the required third-party libraries installed.
 
-3. Build with Visual Studio
+The easiest way to install third-party libraries is to download archive with pre-built binaries, corresponding to version of Visual Studio you are using, from http://www.opencascade.com/content/3rd-party-components.
 
-   Note: If VTK was not installed on you computer and you are not interested in usage of 
-            OCCT VTK Integration Services (VIS) component you should exclude TKIVtk and TKIVtkDraw 
-            projects from process of compilation in the main menu  <b>Build / Configuration Manager</b>. 
+You can also build third-party libraries from their sources, see @ref occt_dev_guides__building_3rdparty_windows for instructions.
+
+@section build_msvc_conf Configuration
+
+If you have Visual Studio projects already available (pre-installed or generated), you can edit file *custom.bat* manually to adjust the environment:
+
+* *VCVER* -- version of Visual Studio (vc10, vc11, vc12, or vc14), and relevant *VCVARS* path
+* *ARCH* -- architecture (32 or 64), affects only *PATH* variable for execution
+* <i>HAVE_*</i> -- flags to enable or disable use of optional third-party products
+* <i>CSF_OPT_*</i> -- paths to search for includes and binaries of all used  third-party products
+* *SHORTCUT_HEADERS* -- if set to "true", folder *inc* will be populated by short-cut files pointing to actual headers located in *src*; otherwise, header files will be copied to *inc*.
+
+Alternatively, you can launch **genconf**, a GUI tool allowing to configure build options interactively.
+That tool will analyze your environment and propose you to choose available options:
+
+* Version of Visual Studio to be used (from the list of installed ones, detected by presence of environment variables like *VS100COMNTOOLS*)
+* Option to use short-cuts to header files in folder *inc* (enabled by default).
+* Location of third-party libraries (usually downloaded from OCCT web site, see above).
+* Path to common directory where third-party libraries are located (optional)
+* Paths to headers and binaries of the third-party libraries (found automatically basing on previous options; click button "Reset" to update).
+
+@figure{/dev_guides/building/3rdparty/images/genconf_windows.png}
+
+Click "Save" to store the specified configuration in *custom.bat* file.
+  
+@section build_msvc_generate Projects generation
+
+Launch **genproj** to update content of *inc* folder and generate project files after changes in OCCT code affecting layout or composition of source files.
+
+@note To use **genproj** and **genconf** tools you need to have Tcl installed and accessible by PATH.
+If Tcl is not found, the tool may prompt you to enter the path to directory where Tcl can be found.
+ 
+~~~~~
+  $ genproj.bat
+~~~~~
+
+Note that if *custom.bat* is not present, **genproj** will start **genconf** to configure environment.
+
+@section build_msvc_build Building
+
+Launch *msvc.bat* to start Visual Studio with all necessary environment variables defined, and build the whole solution or required toolkits.
+
+Note: the MSVC project files are located in folders <i>adm\\msvc\\vc...</i>.
+Binaries are produced in *win32* or *win64* folders.
 
 To start DRAW, launch *draw.bat*.

dox/dev_guides/building/wok/wok.md

@@ -1,162 +0,0 @@
-Using WOK {#occt_dev_guides__building_wok}
-=========
-
-@tableofcontents
-
-\ref occt_dev_guides__wok "WOK" is a legacy build environment for Open CASCADE Technology. 
-It is required for generation of header files for classes defined with 
-@ref occt_dev_guides__cdl "CDL" ("Cascade Definition Language"). 
-Also tools for generation of project files for other build systems, and OCCT 
-documentation, are integrated to WOK.
-
-WOK thus is needed in the following situations:
-- Building from OCCT sources from Git repository (do not contain generated files)
-- Building after some changes made in CDL files
-
-Before installing and using WOK, make sure that you have installed a compiler 
-(it is assumed that it is Visual Studio on Windows or gcc on Linux and MacOS) 
-and third-party components required for building OCCT.
-
-@section wok1 Installing WOK
-
-  Download the latest version of binary distribution WOK from http://dev.opencascade.org/index.php?q=home/resources
-
-@subsection wok11 Windows
-
-  Run the installer. You will be prompted to read and accept the OCCT Public License to proceed:
-  
-  @image html /dev_guides/building/wok/images/wok_image001.png
-  @image latex /dev_guides/building/wok/images/wok_image001.png
- 
-  Click **Next** and proceed with the installation.
-  At the end of the installation you will be prompted to specify the version and the location of Visual Studio to be used, and the location of third-party libraries:
-  
-  @image html /dev_guides/building/wok/images/wok_image002.png
-  @image latex /dev_guides/building/wok/images/wok_image002.png
- 
-  You can change these settings at any time later. For this click on the item **Customize environment (GUI tool)** in the WOK group in the Windows Start menu.
-  
-  The shortcuts from this group provide two ways to run WOK: 
-  * In command prompt window using option *WOK TCL shell*. 
-  * In Emacs editor using option *WOK Emacs*. Using Emacs is convenient if you need to work within WOK environment. 
-
-  By default WOK installer creates a WOK factory with name *LOC* within workshop *dev*. I.e. the WOK path is <i>:LOC:dev</i>. 
-
-@subsection wok12 Linux
-
-  * Unpack the .tgz archive containing WOK distributive into the installation directory <i>\<WOK_INSTALL_DIR\></i>.
-
-  * Perform the following commands assuming that you have unpacked WOK distributive archive into <i>\<WOK_INSTALL_DIR\></i>:
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  cd \<WOK_INSTALL_DIR\>/site
-  wok_confgui.sh
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  
-  Define all necessary paths to third-party products in the dialog window:
-  
-  @image html /dev_guides/building/wok/images/wok_image003.png
-  @image latex /dev_guides/building/wok/images/wok_image003.png
- 
-  * Run the following commands to create WOK LOC factory:
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  cd \<WOK_INSTALL_DIR\>/site
-  wok_init.sh
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  
-  * Your installation procedure is over. To run WOK use one the following commands:
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  cd \<WOK_INSTALL_DIR\>/site
-  wok_emacs.sh
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  or
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  cd \<WOK_INSTALL_DIR\>/site
-  wok_tclsh.sh
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-@subsection wok13 Mac OS X
-
-  * Double click on file *wokSetup.dmg* in the Finder. This opens a new window. Drag and drop *wokSetup* folder from this window at the location in the Finder where you want to install WOK, i.e. <i>\<WOK_INSTALL_DIR\></i>.
-  
-  * Browse to the folder <i>\<WOK_INSTALL_DIR\>/site</i> and double click on *WokConfig*. This opens a window with additional search path settings. Define all necessary paths to third-party products in the dialog window:
-  
-  @image html /dev_guides/building/wok/images/wok_image004.png
-  @image latex /dev_guides/building/wok/images/wok_image004.png
- 
-  * Run the following commands to create WOK LOC factory:
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  cd \<WOK_INSTALL_DIR\>/site
-  wok_init.sh
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-  
-  * Your installation procedure is over. To run WOK in Emacs navigate in the Finder to the folder <i>\<WOK_INSTALL_DIR\>/site</i> and double click on *WokEmacs*.
-
-
-@section wok2 Initialization of Workbench
-
-  To start working with OCCT, clone the OCCT Git repository from the server (see http://dev.opencascade.org/index.php?q=home/resources for details) or unpack the source archive. 
-  
-  Then create a WOK workbench (command *wcreate*) setting its Home to the directory, where the repository is created (<i>$CASROOT</i> variable). The workbench should have the same name as that directory. 
-  
-  For example, assuming that OCCT repository has been cloned into *D:/occt* folder: 
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  LOC:dev> wcreate occt -DHome=D:/occt
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-  Note that <i>$CASROOT</i> is equal to *D:/occt* now.
-
-  Then you can work with this workbench using normal WOK functionality (*wprocess, umake*, etc.; see @ref occt_dev_guides__wok "WOK User's Guide" for details) or use it only for generation of derived sources and project files, and build OCCT with Visual Studio on Windows or *make* command on Linux, as described below.
-  
-@section wok3 Generation of building projects
-
-  Use command *wgenproj* in WOK to generate derived headers, source and building projects files: 
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  LOC:dev> wokcd occt
-  LOC:dev:occt> wgenproj [ -target=<TARGET> ] [ -no_wprocess ]
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-TARGET:
-  * *vc8* - Visual Studio 2005;
-  * *vc9* - Visual Studio 2008;
-  * *vc10* - Visual Studio 2010;
-  * *vc11* - Visual Studio 2012;
-  * *cbp* - CodeBlocks;
-  * *cmake* - CMake;
-  * *amk* - AutoMake;
-  * *xcd* - Xcode;
-  * <i>-no_wprocess</i> option skips generation of derived headers and source files.
-
-Note that this command takes several minutes to complete at the first call. 
-
-Re-execute this step to generate derived headers, source and building projects files if some CDL files in OCCT have been modified (either by you directly, or due to updates in the repository). Note that in some cases WOK may fail to update correctly; in such case remove sub-directories *drv* and <i>.adm</i> and repeat the command. 
-
-To regenerate derived headers and source files without regeneration of projects use command:
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  LOC:dev> wokcd occt
-  LOC:dev:occt> wprocess -DGroups=Src,Xcpp
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The generated building project has been placed into <i>$CASROOT/adm</i> folder:
-  * for vc8 - <i>$CASROOT/adm/msvc/vc8</i>;
-  * for vc9 - <i>$CASROOT/adm/msvc/vc9</i>;
-  * for vc10 - <i>$CASROOT/adm/msvc/vc10</i>;
-  * for vc11 - <i>$CASROOT/adm/msvc/vc11</i>;
-  * for cbp - <i>$CASROOT/adm/\<OS\>/cbp</i>;
-  * for cmake - <i>$CASROOT/adm/cmake</i>;
-  * for amk - <i>$CASROOT/adm/lin/amk</i>;
-  * xcd - <i>$CASROOT/adm/\<OS\>/xcd</i>
-
-@section wok4  Generation of documentation
-
-  Use command *wgendoc* in WOK to generate reference documentation: 
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
-  :LOC:dev> wokcd occt
-  :LOC:dev:occt> wgendoc 
-  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The following options can be used: 
-  * <i>-wb=\<workbench name\></i>  the name of OCCT workbench (the current one by default);
-  * <i>-m=\<list of modules\></i> the list of modules that will be contained in the documentation;
-  * <i>-outdir=\<path\></i> the output directory for the documentation;
-  * <i>-chm</i>  the option to generate CHM file;
-  * <i>-hhc=\<path\></i> the path to HTML Help Compiler *hhc.exe* or equivalent;
-  * <i>-qthelp=\<path\></i> the option to generate Qt Help file, where <i>\<path\></i> is the required path to *qthelpgenerator* executable;
-  * <i>-doxygen=\<path\></i> the path to Doxygen executable;
-  * <i>-dot=\<path\></i> the path to GraphViz dot executable.

dox/dev_guides/building/xcode.md

@@ -1,58 +1,65 @@
 Building with Xcode {#occt_dev_guides__building_xcode}
 ===================
 
-This file describes steps to build OCCT libraries from a complete source package
-on Mac OS X with **Xcode**.
+@tableofcontents
 
-If you build OCCT from bare sources (as in Git repository) or do some 
-changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See \ref occt_dev_guides__building_wok for instructions.
+@section build_xcode_intro General
 
-Before building OCCT, you need to install the required third-party libraries; see
-paragraph 1 of \ref occt_dev_guides__building for details.
+This file describes steps to build OCCT libraries from sources on Mac OS X with **Xcode** projects, generated by OCCT legacy tool **genproj**.
 
-1. Add paths to the mandatory 3rd-party products (**Tcl/Tk** and **FreeType**) 
-   in file *custom.sh* located in <i>\<OCCT_ROOT_DIR\> </i>. For this:
+@section build_xcode_3rdparty Third-party libraries
 
-   1.1. Add paths to the includes in variable *CSF_OPT_INC*;
+Before building OCCT, make sure to have all the needed third-party libraries installed.
+On OS X we recommend to use native libraries.
+You can also build third-party libraries from their sources, see @ref occt_dev_guides__building_3rdparty_osx for instructions.
 
-   1.2. Add paths to the binary libraries in variable  *CSF_OPT_LIB64*;
+@section build_xcode_conf Configuration
 
-   All paths should be separated by ":" symbol. 
+Before building it is necessary to set up build environment.
 
-2. Add paths to the optional 3rd-party libraries (**TBB, gl2ps** and **FreeImage**) 
-   in the aforementioned environment variables *CSF_OPT_INC* and *CSF_OPT_LIB64* from file *custom.sh*.
+The environment is defined in the file *custom.sh* which can be edited directly:
 
-   If you want to build OCCT without the optional libraries perform the following steps:
-
-   2.1 Disable unnecessary library in *custom.sh* by setting the corresponding 
-       variable <i>HAVE_<LIBRARY_NAME></i> to *false*. 
+* Add paths to includes of used third-party libraries in variable *CSF_OPT_INC* (use colon ":" as path separator).
+* Add paths to their binary libraries in variable  *CSF_OPT_LIB64*.
+* Set variable *SHORTCUT_HEADERS* to "true" to have folder *inc* populated by short-cut files pointing to actual headers located in *src*; otherwise, header files will be copied to *inc*.
+* For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
 ~~~~~
        export HAVE_GL2PS=false
 ~~~~~
-   2.2 Remove this library from Project navigator in Xcode for each project that 
-       uses it: choose the required project, right click on the unnecessary 
-       library and select **Delete** button.
 
-3. Open Terminal application.
+Alternatively, or when *custom.sh* does not exist, you can launch *genconf.sh* to configure environment interactively:
+
+@figure{/dev_guides/building/3rdparty/images/genconf_osx.png}
+
+Click "Save" to store the specified configuration in *custom.sh* file.
+  
+@section build_xcode_gen Projects generation
+
+Launch **genproj** tool to update content of *inc* folder and generate project files after changes in OCCT code affecting layout or composition of source files.
+
+@note To use **genproj** and **genconf** tools you need to have Tcl installed and accessible by PATH.
+
+For instance, in Terminal application:
 
-4. Enter <i>\<OCCT_ROOT_DIR\></i>:
 ~~~~~
-   cd \<OCCT_ROOT_DIR\>
+  $ cd /dev/OCCT/opencascade-7.0.0
+  $ ./genproj.sh
 ~~~~~
-5. To start **Xcode**, run command  <i>/xcode.sh</i>
 
-6. To build a certain toolkit, select it in **Scheme** drop-down list in Xcode 
-   toolbar, press **Product** in the menu and click **Build** button. 
+@section build_xcode_build Building
 
-   To build the entire OCCT, create a new empty project (select **File -> 
-   New -> Project -> "Empty project** in the menu. Input the project name, 
-   e.g. *OCCT*, click **Next** and **Create** buttons). Drag and drop the *OCCT* 
-   folder in the created *OCCT* project in the Project navigator. Select 
-   **File -> New -> Target -> Aggregate** in the menu. Enter the project name 
-   (e.g. <i>OCCT</i>) and click **Finish**. The **Build Phases** tab will open.  
-   Click "+" button to add the necessary toolkits to the target project. 
-   It is possible to select all toolkits by pressing **Command+A** combination. 
+To start **Xcode**, launch script *xcode.sh*.
+
+To build a certain toolkit, select it in **Scheme** drop-down list in Xcode toolbar, press **Product** in the menu and click **Build** button. 
+
+To build the entire OCCT:
+* Create a new empty project (select **File -> New -> Project -> Empty project** in the menu; input the project name, e.g. *OCCT*; then click **Next** and **Create**).
+* Drag and drop the *OCCT* folder in the created *OCCT* project in the Project navigator.
+* Select **File -> New -> Target -> Aggregate** in the menu. 
+* Enter the project name (e.g. *OCCT*) and click **Finish**. The **Build Phases** tab will open.  
+* Click "+" button to add the necessary toolkits to the target project. It is possible to select all toolkits by pressing **Command+A** combination. 
+
+@section build_xcode_draw Launching DRAW
 
 To start *DRAWEXE*, which has been built with Xcode on Mac OS X, perform the following steps:
 
@@ -67,4 +74,5 @@ To start *DRAWEXE*, which has been built with Xcode on Mac OS X, perform the fol
 ~~~~~
    ./draw_cbp.sh xcd [d]
 ~~~~~
-   Option *d* is used if OCCT has been built in **Debug** mode.
+
+Option *d* is used if OCCT has been built in **Debug** mode.

dox/dev_guides/contribution/coding_rules.md

@@ -36,7 +36,6 @@ Open CASCADE Technology is an open source platform available for an internationa
 Names should be meaningful or, at least, contain a meaningful part. To better understand this requirement, let us examine the existing names of toolkits, packages, classes and methods:
 - Packages containing words *Geom* or *Geom2d* in their names are related to geometrical data and operations.
 - Packages containing words *TopoDS* or *BRep* in their names are related to topological data and operations.
-- In OCAF, packages that define transient, persistent data classes and drivers to map between them, have similar names prefixed by *T*, *P*, and *M* correspondingly (e.g. *TDocStd*, *PDocStd*, *MDocStd*).
 - Packages ending with <i>...Test</i> define Draw Harness plugins.
 - Methods starting with *Get...* and *Set...* are usually responsible for correspondingly retrieving and storing data.
 
@@ -67,10 +66,9 @@ Names of units should not contain underscores, unless the use of underscores is
 
 The following extensions should be used for source files, depending on their type:
 
-* <i>.cdl</i> - CDL declaration files
-* <i>.cxx</i> - C++ source files
-* <i>.hxx</i> - C++ header files
-* <i>.lxx</i> - headers with definitions of inline methods (CDL packages)
+* <i>.cxx</i> -- C++ source files
+* <i>.hxx</i> -- C++ header files
+* <i>.lxx</i> -- additional headers containing definitions of inline methods and auxiliary code
 
 ### Prefix for toolkit names [MANDATORY]
 
@@ -452,7 +450,7 @@ The source code is one of the most important references for documentation.
 The comments in the source code should be complete enough to allow understanding the corresponding code and to serve as basis for other documents.
 
 The main reasons why the comments are regarded as documentation and should be maintained are:
-- The comments are easy to reach - they are always together with the source code;
+- The comments are easy to reach -- they are always together with the source code;
 - It is easy to update a description in the comment when the source is modified;
 - The source by itself is a good context to describe various details that would require much more explanations in a separate document;
 - As a summary, this is the most cost-effective documentation.
@@ -486,7 +484,7 @@ They should be detailed enough to allow any person to understand what each part
 
 It is recommended to comment all static functions (like methods in headers), and to insert at least one comment per each 10-100 lines in the function body.
 
-There are also some rules that define how comments should be formatted, see <a href="#occt_coding_rules_3">Formatting Rules</a>.
+There are also some rules that define how comments should be formatted, see @ref occt_coding_rules_3 "Formatting Rules".
 
 Following these rules is important for good comprehension of the comments. Moreover, this approach  allows automatically generating user-oriented documentation directly from the commented sources.
 
@@ -950,7 +948,7 @@ Command should warn the user about unknown arguments, including cases when extra
 
 ### Message printing
 
-Informative messages should be printed into standard output *std::cout*, whilst command results (if any) - into Draw Interpreter.
+Informative messages should be printed into standard output *std::cout*, whilst command results (if any) -- into Draw Interpreter.
 
 Information printed into Draw Interpreter should be well-structured to allow usage in TCL script.
 

dox/dev_guides/contribution_workflow/contribution_workflow.md

@@ -2,282 +2,464 @@ Contribution Workflow {#occt_dev_guides__contribution_workflow}
 ====================================
 @tableofcontents 
 
-@section occt_contribution_workflow_1 Introduction
+@section occt_contribution_intro Introduction
 
 The purpose of this document is to describe standard workflow for processing contributions to certified version of OCCT. 
 
-@subsection occt_contribution_workflow_1_1 Use of issue tracker system
+@subsection occt_contribution_intro_tracker Use of issue tracker system
 
 Each contribution should have corresponding issue (bug, or feature, or integration request) 
 registered in the MantisBT issue tracker system accessible by URL 
 http://tracker.dev.opencascade.org. 
-The issue is processed further according to the described workflow.
+The issue is processed according to the described workflow.
 
-@subsection occt_contribution_workflow_1_2 Access Levels 
+@subsection occt_contribution_intro_access Access levels
 
-  Access level defines the permissions of the user to view, 
-  register and modify issues in a Mantis bugtracker. 
-  The correspondence of access level and user permissions 
-  is defined in accordance with the table below.
+Access level defines the permissions of the user to view, register and modify issues in the issue tracker. 
+The correspondence of access level and user permissions is defined in the table below.
 
 | Access level  | Granted to       | Permissions       | Can set statuses         |
 |:------------- | :--------- | :-------------- | :----------------------- |
-| Viewer        | Everyone (anonymous access)   | View public issues only    | No     |
-| Reporter | Users registered on dev.opencascade.com  | View, report, and comment issues  | New, Resolved   |
-| Updater       | Users of dev.opencascade.com in publicly visible projects | View  and comment issues | New, Resolved  |
-| Developer     | OCC developers and external contributors who signed the CLA  | View, report, modify, and handle issues | New, Assigned, Resolved, Reviewed  |
-| Tester        | OCC engineer devoted to certification testing | View, report, modify, and handle issues | Assigned, Tested         |
-| Manager       | Person responsible for a project or OCCT component | View, report, modify, and handle issues | New, Resolved, Reviewed, Tested, Closed  |
+| Viewer        | Everyone (anonymous access)   | View public issues only    | None |
+| Updater       | Users registered on dev.opencascade.org, in Open CASCADE project | View  and comment issues | None |
+| Reporter      | Users registered on dev.opencascade.org, in Community project | View, report, and comment issues  | New, Resolved, Feedback |
+| Developer     | OCC developers and (in Community project) external contributors who signed the CLA | View, report, modify, and handle issues | New, Assigned, Resolved, Reviewed, Feedback |
+| Tester        | OCC engineer devoted to certification testing | View, report, modify, and handle issues | Assigned, Tested, Feedback |
+| Maintainer    | Person responsible for a project or OCCT component | View, report, modify, and handle issues | New, Resolved, Reviewed, Tested, Closed, Feedback |
+| Bugmaster     | Person responsible for Mantis issue tracker, integrations, certification, and releases | Full access | All statuses |
 
 According to his access level, the user can participate in the issue handling process under different roles, as described below.
 
-@section occt_contribution_workflow_2 Typical workflow for an issue
+@section occt_contribution_workflow Standard workflow for an issue
 
-@subsection occt_contribution_workflow_2_1 General scheme
+@subsection occt_contribution_workflow_general General scheme
 
-@image html OCCT_ContributionWorkflow_V3_image001.png "Standard life cycle of an issue"
-@image latex OCCT_ContributionWorkflow_V3_image001.png "Standard life cycle of an issue"
+<center>
+@image html OCCT_ContributionWorkflow_V3_image001.svg "Standard life cycle of an issue"
+@image latex OCCT_ContributionWorkflow_V3_image001.svg "Standard life cycle of an issue"
+</center>
   
-@subsection occt_contribution_workflow_2_2 Issue registration
+@subsection occt_contribution_workflow_issue Issue registration
 
-An issue is registered in Mantis bugtracker by the Reporter with definition of the necessary attributes. 
-The definition of the following attributes is obligatory:
+An issue is registered in Mantis bugtracker by the **Reporter** with definition of the necessary attributes (see also @ref occt_contribution_app):
 
-  * **Category** - indicates component of OCCT to which the issue relates. If in doubt, assign OCCT:Foundation Classes.
-  * **Reproducibility** 
-  * **Severity** 
-  * **Priority**
-  * **Profile** - allows defining the platform on which the problem was detected   from the list of predefined platforms. If a platform is absent in the list of predefined platforms it is possible to use Or Fill In option to define the platform manually.
-    * **Platform**
-    * **OS**
-    * **OS Version**
-  * **Products Version** - defines the version of Open CASCADE on which the problem has been detected.
-  * **Summary** - a short, one sentence description of the issue. It has a limit of 128 characters. It should be informative and useful for the developers. It is advisable to avoid vague or misleading phrases, such as "it doesn't work" or "it crashed". It is not allowed to mention the issue originator, and in particular the customer, in the name of the registered issue.
-  * **Description** - should contain a detailed definition of the nature of the registered issue depending on its type. For a bug it is required to submit a detailed description of the incorrect behavior, including the indication of the cause of the problem (if possible at this stage) or any inputs from the originator. For a feature or integration request it is recommended to describe the proposed feature in details (as possible at that stage), including the changes required for its implementation and the main features of the new functionality. Filling the bug description is obligatory. 
-  * **Steps To Reproduce** - in this field it is possible to describe in detail how to reproduce the issue.  This field considerably helps to find the cause of the problem, to eliminate it and to create the test case.
-  * *Upload File* field allows attaching the shapes, scripts or modified source files of OCCT. It is recommended to attach a prototype test case in form of a Tcl script for DRAW,   using either existing DRAW commands, or a C++ code which can be organized in DRAW commands,   as well as sample shapes or other input data (if applicable), immediately after the issue registration. 
+**Category** -- indicates the OCCT component, to which the issue relates.
+    (If in doubt, assign to OCCT:Foundation Classes.)
+
+**Severity** -- indicates the impact of the issue in the context where it was discovered.
+
+**Profile** -- specifies the configuration, on which the problem was detected. 
+For specific configurations it is possible to specify separately platform, OS, and version.
+These fields can be left empty if the issue is not configuration-specific.
+Additional details relevant for the environment where the issue is reproduced (such as compiler version, bitness, etc.) can be provided in the **Description**.
+
+**Products Version** -- defines the OCCT version, on which the problem has been detected.
+
+It is preferable to indicate the version of the earliest known official release where the problem can be reproduced.
+If the issue is reported on the current development version of OCCT, the current development version should be used (for convenience, this version is marked by asterisk in Mantis).
+    
+@note OCCT version number can be consulted in the file Standard_Version.hxx (value of OCC_VERSION_COMPLETE macro).
+
+**Assign to** -- developer to whom the issue will be assigned. 
+    By default, it is set to **Maintainer** of the OCCT component selected in **Category** field.
+
+**Target Version** -- defines the target version for the fix to be provided.
+    By default, it is set to the current version under development.
+
+**Summary** -- a short, one sentence description of the issue. 
   
-  The newly registered issue gets status **NEW** and is assigned to the developer responsible for the OCCT component indicated in the Category field (Maintainer). 
+The **Summary** has a limit of 128 characters. 
+It should be informative and useful for the developers. 
+It is not allowed to mention the issue originator, and in particular the customer, in the name of the registered issue.
 
-@subsection occt_contribution_workflow_2_3 Assigning the issue
+A good practice is to start the issue with indication of the relevant component (OCCT module, package, class etc.) to better represent its context.
 
-  The description of the new issue is checked by the **Maintainer** and if it is feasible, 
-  he may assign the issue to a **Developer**. Alternatively, any user with **Developer** access level  
-  or higher can assign the issue to himself if he wants to provide a solution. 
+The summary should be given in imperative mood when it can be formulated as goal to be achieved or action to be done.
+In particular, this applies to feature requests and improvements, for instance:
+
+> *Visualization - provide a support of zoom persistent selection*
+
+If the issue reports a problem, the summary should be given in Present Simple.
+If reported problem is believed to be a regression, it is recommended to indicate this in the summary, like this:
+
+> [Regression in 6.9.0] *IGES - Export of a reversed face leads to wrong data*
+
+**Description** -- should contain a detailed definition of the nature of the registered issue depending on its type. 
+
+For a bug it is required to submit a detailed description of the incorrect behavior, including the indication of the cause of the problem (if known at this stage), and details on the context where the issue has been detected.
+
+For a feature or integration request it is necessary to describe the proposed feature in details (as much as possible at that stage), including the changes required for its implementation and the main features of the new functionality. 
+
+Example:
+
+> *Currently selection does not work correctly for non-zoomable objects (those defined using transform persistence). To provide correct selection for such objects, first-level (object) BVH structures must be updated on each camera change, and frustum must be rebuilt accordingly.*
+
+@note In the description and notes to the issues you can refer to another issue by its ID prefixed by number sign (e.g.: #12345), and refer to a note by its ID prefixed by tilde (e.g.: ~20123). 
+These references will be expanded by Mantis into links to the corresponding issue or note. 
+When the number sign or the tilde followed by digits are a part of a normal text, add a space before digits (e.g.: "face # 12345 contains ~ 1000 edges") to avoid this conversion.
+
+**Steps To Reproduce** -- allows describing in detail how to reproduce the issue. 
+
+This information is crucial for the developer to investigate the cause of the problem and to create the test case.
+The optimal approach is to give a sequence of @ref occt_user_guides__test_harness "DRAW Test Harness" commands to reproduce the problem in DRAW.
+This information can also be provided as a DRAW Tcl script attached to the issue (in **Upload File** field).
+
+**Additional information and documentation updates** -- any additional information, remarks to be taken into account in Release Notes, etc.. 
+
+**Upload File** -- allows attaching the shapes, snapshots, scripts, documents, or modified source files of OCCT. 
+
+This field can be used to attach a prototype test case in form of a Tcl script for DRAW, a C++ code which can be organized in DRAW commands, sample shapes, documents describing proposed change or analysis of the problem, or other data required for reproduction of the issue.
+Where applicable, pictures demonstrating a problem and/or desired result can be attached.
   
-  The recommended way to handle contributions is that the **Reporter** assigns the issue to himself and provides a solution.
+The newly registered issue gets status **NEW** and is assigned to the person indicated in the **Assign to** field. 
 
-  The **Maintainer, Technical Project Manager,** or **Bugmaster** can close or reassign the issue 
-  (in **FEEDBACK** state) to the **Reporter** after it has been registered, if its description does not contain sufficient details to reproduce the bug or explain the purpose of the new feature. 
-  That decision shall be documented in the comments to the issue in the Bugtracker.
+@subsection occt_contribution_workflow_assign Assigning the issue
 
-  The assigned issue should have state **ASSIGNED**.
-
-@subsection occt_contribution_workflow_2_4 Resolving the issue
-
-  The **Developer** responsible for the issue assigned to him provides a solution 
-  as a change on the version of OCCT indicated in the issue attributes, or the last development version. 
-
-  The modified sources should be submitted for review and testing to the dedicated branch of the official OCCT Git repository:
-
-  * Branch should be created for the issue with name composed of letters ‘CR’ followed by issue ID number (without leading zeroes). 
-   Optional suffix can be added to the branch name after issue ID, 
-   e.g. to distinguish between several version of the fix.
-  * The branch should be based on recent version of the master branch 
-   (not later than commit tagged as last OCCT release).
-  * The first line of the first commit message should contain 
-   the Summary of the issue (starting with its ID followed by colon, e.g. "0022943: Bug TDataXtd_PatternStd"). 
-   The consequent lines should contain a description of the changes made. 
-   If more than one commit has been made, the commit messages should contain description of the changes made.
-  * The amount of the code affected by the change should be limited 
-   to only the changes required for the bug fix or improvement. 
-   Change of layout or re-formatting of the existing code is allowed 
-   only in the parts where meaningful changes related to the issue have been made.
-  * The name of the branch where the fix is submitted should be given 
-   in the note to the Mantis issue 
-   (providing the direct link to relevant branch view in GitWeb is encouraged).
-  * The description of the changes made should be put to the field 
-   "Additional information and documentation updates" of the Mantis issue.
-
-  In some cases (if Git is not accessible for the contributor), 
-  external contributions can be submitted as patch (diff) files or sources 
-  attached to the Mantis issue, with indication of OCCT version on which the fix is made. 
-  Such contributions should be put to Git for processing by someone else,
-  and hence they have less priority in processing than the ones submitted directly through Git.
-
-  The issue for which solution is provided should be switched to **RESOLVED** state 
-  and assigned to the developer who is expected to make a code review 
-  (the **Reviewer**; by default, can be set to the **Maintainer** of the component).
-
-@subsection occt_contribution_workflow_2_5 Code review
-
-  The **Reviewer** analyzes the proposed solution for applicability in accordance with OCCT Code reviewing rules and examines all changes in the sources to detect obvious and possible errors, misprints, conformity to coding style.
+The description of the new issue is checked by the **Maintainer** and if it is feasible, he may assign the issue to a **Developer**.
+Alternatively, any user with **Developer** access level or higher can assign the issue to himself if he wants to provide a solution. 
   
-    * If Reviewer detects some problems, he can either:
-      * Fix these issues and provide new solution, reassigning the issue (in **RESOLVED** state) to the **Developer**, who then becomes a **Reviewer**. 
-       Possible disagreements should be resolved through discussion, which is done normally within issue notes (or on the OCCT developer’s forum if necessary).
-      * Reassign the issue back to the **Developer**,  providing detailed list of remarks. The issue then gets status **ASSIGNED** and a new solution should be provided.
-    * If Reviewer does not detect any problems, he changes status to **REVIEWED**.
+The recommended way to handle contributions is that the **Reporter** assigns the issue to himself and provides a solution.
 
-@subsection occt_contribution_workflow_2_6 Testing
+The **Maintainer** or **Bugmaster** can close or reassign the issue (in **FEEDBACK** state) to the **Reporter** after it has been registered, if its description does not contain sufficient details to reproduce the bug or explain the need of the new feature. 
+That decision shall be documented in the comments to the issue in the Bugtracker.
+
+The assigned issue has status **ASSIGNED**.
+
+@subsection occt_contribution_workflow_fix Resolving the issue
+
+The **Developer** responsible for the issue assigned to him provides a solution including:
+
+* Changes in the code, with appropriate comments;
+* Test case (when applicable) and data necessary for its execution;
+* Changes in the user and developer guides (when necessary).
+
+The change is integrated to branch named CRxxxxx (where **xxxxx** is issue number) in the OCCT Git repository, based on current master, and containing a single commit with the appropriate description.
+Then the issue is switched to **RESOLVED** for further review and testing.
+
+The following sub-sections describe this process, relevant requirements and options, in more details.
+
+@subsubsection  occt_contribution_workflow_fix_code Requirements to the code modification
+ 
+The amount of code affected by the change should be limited to the changes required for the bug fix or improvement.
+Change of layout or re-formatting of the existing code is allowed only in the parts where meaningful changes related to the issue have been made.
+
+@note If deemed useful, re-formatting or cosmetic changes affecting considerable parts of the code can be made within a dedicated issue.
+
+The changes should comply with the OCCT @ref occt_dev_guides__coding_rules "Codng Rules". 
+It is especially important to comment the code properly so that other people can understand it easier.
+
+The modification should be tested by running OCCT tests (on the platform and scope available to **Developer**) and ensuring absence of regressions.
+In case if modification affects results of some existing test case and the new result is correct, such test case should be updated to report OK (or BAD), as descibed in @ref testmanual_details_results "Automated Test System / Interpretation of Test Results".
+      
+@subsubsection occt_contribution_workflow_fix_test Providing a test case
+
+For modifications affecting OCCT functionality, a test case should be created (unless already exists) and included in the commit or patch.
+See @ref testmanual_intro_quick_create "Automated Test System / Creating a New Test" for relevant instructions.
+
+The data files required for a test case should be attached to the corresponding issue in Mantis (i.e. not included in the commit).
+
+When the test case cannot be provided for any reason, the maximum possible information on how the problem can be reproduced and how to check the fix should be provided in the **Steps to Reproduce** field of an issue.
+
+@subsubsection  occt_contribution_workflow_fix_doc Updating user and developer guides
+
+If the change affects a functionality described in @ref user_guides "User Guides", the corresponding user guide should be updated to reflect the change.
+
+If the change affects OCCT test system, build environment, or development tools described in @ref dev_guides "Developer Guides", the corresponding guide should be updated.
+ 
+The changes that break compatibility with the previous versions of OCCT (i.e. affecting API or behavior of existing functionality in the way that may require update of existing applications based on an earlier official release of OCCT to work correctly) should be described in the document @ref occt_dev_guides__upgrade "Upgrade from previous OCCT versions".
+It is recommended to add a sub-section for each change described.
+The description should provide the explanation of the incompatibility introduced by the change, and describe how it can be resolved (at least, in known situations).
+When feasible, the automatic upgrade procedure (adm/upgrade.tcl) can be extended by a new option to perform the required upgrade of the dependent code automatically. 
+
+@subsubsection  occt_contribution_workflow_fix_git Submission of change as a Git branch
+  
+The modification of sources should be provided in the dedicated branch of the official OCCT Git repository.
+
+The branch should contain a single commit, with the appropriate commit message (see @ref occt_contribution_workflow_fix_commit "Requirements to the commit message" below).
+
+In general, this branch should be based on the recent version of the master branch.
+It is highly preferable to submit changes basing on the current master.
+In case if the fix is implemented on the previous release of OCCT, the branch can be based on the corresponding tag in Git, instead of the master.
+  
+The branch name should be composed of letters **CR** (abbreviation of "Change Request") followed by the issue ID number (without leading zeros). 
+It is possible to add an optional suffix to the branch name after the issue ID, e.g. to distinguish between several versions of the fix (see @ref occt_contribution_nonstd_rebase).
+
+See @ref occt_dev_guides__git_guide "Guide to using GIT" for help.
+
+@note When a branch with the name given according to the above rule is pushed to Git, a note is automatically added to the corresponding issue in Mantis, indicating the person who has made the push, the commit hash, and (for new commits) the description.
+  
+@subsubsection  occt_contribution_workflow_fix_commit Requirements to the commit message
+
+The commit message posted in Git constitutes an integral part of both the fix and the release documentation.
+
+The first line of the commit message should contain the Summary of the issue (starting with its ID followed by colon, e.g. "0022943: Bug in TDataXtd_PatternStd"), followed by an empty line. 
+
+The following lines should provide a description of the context and details on the changes made.
+The contents and the recommended structure of the description depend on the nature of the bug. 
+  
+In a general case, the following elements should be present:
+* **Problem** -- a description of the unwanted behavior;
+* **Change** -- a description of the implemented changes, including the names of involved classes / methods / enumerations etc.;
+* **Result** -- a description of the current behavior (after the implementation).
+
+Example:
+
+> *0026330: BRepOffsetAPI_ThruSections creates invalid shape.*
+> 
+> *Methods BRep_Tool::CurveOnSurface() and BRepCheck_Edge::InContext() now properly handle parametric range on a 3D curve when it is used to generate a p-curve dynamically (on a planar surface) and both the surface and the 3D curve have non-null locations.*
+
+Provide sufficient context so that potential user of the affected functionality can understand what has been changed and how the algorithm works now.
+Describe reason and essence of the changes made, but do not go too deep into implementation details -- these should be reflected in comments in the code.
+
+@subsubsection occt_contribution_workflow_fix_resolve Marking issue as resolved
+
+To mark the change as ready for review and testing, the corresponding issue should be switched to **RESOLVED** state.
+By default, the issue gets assigned to the **Maintainer** of the component, who is thus responsible for its review. 
+Alternatively, another person can be selected as a reviewer at this step.
+
+When the issue is switched to **RESOLVED**, it is required to update or fill the field **Steps to reproduce**.
+The possible variants are:
+
+* The name of an existing or new test case (preferred variant);
+* A sequence of DRAW commands;
+* N/A (Not required / Not possible / Not applicable);
+* Reference to an issue in the bug tracker of another project.
+
+@subsection occt_contribution_workflow_review Code review
+
+The **Reviewer** analyzes the proposed solution for applicability in accordance with OCCT @ref occt_dev_guides__coding_rules "Coding Rules" and examines all changes in the sources, test case(s), and documentation to detect obvious and possible errors, misprints, or violations of the coding style. 
+
+If the Reviewer detects some problems, he can either:
+
+* Fix these issues and provide a new solution. 
+  The issue can then be switched to **REVIEWED**. 
+  
+  In case of doubt or possible disagreement the **Reviewer** can reassign the issue (in **RESOLVED** state) to the **Developer**, who then becomes a **Reviewer**. 
+  Possible disagreements should be resolved through discussion, which is done normally within issue notes (or on the OCCT developer’s forum if necessary).
+
+* Reassign the issue back to the **Developer**,  providing detailed list of remarks. The issue then gets status **ASSIGNED** and a new solution should be provided.
+    
+If Reviewer does not detect any problems, or provides a corrected version, he changes status to **REVIEWED**.
+The issue gets assigned to the **Bugmaster**.
+
+@subsection occt_contribution_workflow_test Testing
 
   The issues that are in **REVIEWED** state are subject of certification (non-regression) testing. 
-  The issue is assigned to OCC **Tester** when he starts processing it.
-  The results of tests are checked by the **Tester**: 
-    * If the **Tester** detects build problems or regressions, he changes the status to **ASSIGNED** and reassigns the issue to the **Developer** with a detailed description of the problem. The **Developer** should produce a new solution.
-    * If the **Tester** does not detect build problems or regressions, he changes the status to **TESTED** for further integration.
+  The issue is assigned to an OCCT **Tester** when he starts processing it.
 
-@subsection occt_contribution_workflow_2_7 Integration of a solution
+  If the branch submitted for testing is based on obsolete status of the master branch, **Tester** @ref occt_contribution_nonstd_rebase "rebases" it on master HEAD.
+  In case of conflicts, the issue is assigned back to **Developer** in **FEEDBACK** status, requesting for a rebase.
 
-  Before integration into the master branch of the repository the **Integrator** checks the following conditions:
+  Certification testing includes:
+	* Addition of new data models (if required for a new test case) to the data base;
+    * Revision of the new test case(s) added by developer, and changes in the existing test cases included in commit. 
+	  The **Tester** can amend tests to ensure their correct behavior in the certification environment.
+    * Building OCCT on a sub-set of supported configurations (OS and compiler), watching for errors and warnings;
+	* Execution of tests on sub-set of supported platforms (at least, one Windows and one Linux configuration), watching for regressions;
+	* Building OCCT samples, watching for errors;
+	* Building and testing of OCC products based on OCCT.
+
+If the **Tester** does not detect problems or regressions, he changes the status to **TESTED** for further integration.
+
+If the **Tester** detects build problems or regressions, he changes the status to **ASSIGNED** and reassigns the issue to the **Developer** with a detailed description of the problems. 
+The **Developer** should analyze the reported problems and, depending on results of this analysis, either:
+* Confirm that the detected problems are expected changes and they should be accepted as a new status of the code. Then the issue should be switched to **FEEDBACK** and assigned to the **Bugmaster**.
+* Produce a new solution (see @ref occt_contribution_workflow_fix, and also @ref occt_contribution_nonstd_minor).
+
+@subsection occt_contribution_workflow_integrate Integration of a solution
+
+Before integration into the master branch of the repository the **Integrator** checks the following conditions:
     * the change has been reviewed;
     * the change has been tested without regressions (or with regressions treated properly);
     * the test case has been created for this issue (when applicable), and the change has been rechecked on this test case;
-    * "Additional information and documentation updates" field is filled by the developer;
     * the change does not conflict with other changes integrated previously.
   
-  If the result of check is successful the Integrator integrates solution 
-  into the master branch of the repository. Each change is integrated into the master branch 
-  as a single commit without preserving the history of changes made in the branch 
-  (by rebase, squashing all intermediate commits), however, preserving the author when possible. 
-  This is done to have the master branch history plain and clean. 
-  The following picture illustrates the process:
+If the result of check is successful the Integrator integrates the solution into the branch.
+The integrations are performed weekly; integration branches are named following the pattern IR-YYYY-MM-DD.
+
+Each change is integrated as a single commit without preserving the history of changes made in the branch (by rebase, squashing all intermediate commits if any), however, preserving the author when possible.
+This is done to have the master branch history plain and clean.
+The following picture illustrates the process:
   
-@image html OCCT_ContributionWorkflow_V3_image002.png "Integration of several branches"
-@image latex OCCT_ContributionWorkflow_V3_image002.png "Integration of several branches"
+@image html OCCT_ContributionWorkflow_V3_image002.png "Integration of several branches" width=\textwidth
+@image latex OCCT_ContributionWorkflow_V3_image002.png "Integration of several branches" width=\textwidth
   
-  The new master branch is tested against possible regressions that might appear due to interference between separate changes. When the tests are Ok, the new master is pushed to the official repository 
-  and the original branches are removed from it.
-  The issue status is set then to **VERIFIED** and is assigned to the **Reporter** so that he could check the fix as-integrated.
+The new integration branch is tested against possible regressions that might appear due to interference between separate changes.
+When the tests are OK, the integration branch is pushed as the new master to the official repository.
+The issue status is set then to **VERIFIED** and is assigned to the **Reporter** so that he could check the fix as integrated.
 
-@subsection occt_contribution_workflow_2_8 Closing a bug
+The branches corresponding to the integrated fixes are removed from the repository by the **Bugmaster**.
 
-  The **Bugmaster** closes the issue after regular OCCT Release provided that the issue status is **VERIFIED** and that issue was really solved in that release, by rechecking the corresponding test case. The final issue state is **CLOSED**.
+@subsection occt_contribution_workflow_close Closing an issue
 
-@subsection occt_contribution_workflow_2_9 Reopening a bug
+When possible, the **Reporter** should check whether the problem is actually resolved in the environment where it has been discovered, after the fix is integrated to master.
+If the fix does not actually resolve the original problem, the issue in **VERIFIED** status can be reopened and assigned back to the **Developer** for rework.
+The details on how to check that the issue is still reproducible should be provided.
+However, if the issue does resolve the problem as described in the original report, but a similar problem is discovered for another input data or configuration, or the fix has caused a regression, that problem should be registered as a separate (@ref occt_contribution_nonstd_relate "related") issue.
 
-  If a regression is detected, the **Bugmaster** may reopen and reassign the **CLOSED** issue to the appropriate developer with comprehensive comments about the reason of reopening. The issue then becomes **ASSIGNED** again. 
+If the fix integrated to master causes regressions, **Bugmaster** can revert it and reopen the issue.
 
-@section occt_contribution_workflow_3 Appendix
+The **Bugmaster** closes the issue after the regular OCCT Release, provided that the issue status is **VERIFIED** and the change was actually included in the release.
+The final issue state is **CLOSED**.
 
-@subsection occt_contribution_workflow_3_1 Issue attributes
+The field **Fixed in Version** of the issue is set to the OCCT version where it is fixed.
 
-@subsubsection occt_contribution_workflow_3_1_1 Severity
+@section occt_contribution_nonstd Additional workflow elements
+
+@subsection occt_contribution_nonstd_feedback Requesting more information or specific action
+
+If, at any step of the issue lifetime, the person responsible for it cannot process it due to absence of required information, expertise, or rights, he can switch it to status **FEEDBACK** and assign to the person who is (presumably) able to resolve the block. Some examples of typical situations where **FEEDBACK** is used are:
+
+* The **Maintainer** or the **Developer** requests for more information from the **Reporter** to reproduce the issue;
+* The **Tester** requests the **Developer** or the **Maintainer** to help him in the interpretation of testing results; 
+* The **Developer** or the **Maintainer** asks the **Bugmaster** to close the issue that is found irrelevant or already fixed (see @ref occt_contribution_nonstd_autofix).
+
+In general, issues with status **FEEDBACK** should be processed as fast as possible, to avoid unjustified delays.
+
+@subsection occt_contribution_nonstd_relate Defining relationships between issues
+
+When two or more issues are related to each other, this relationship should be reflected in the issue tracker.
+It is also highly recommended to add a note to explain the relationship.
+Typical cases of relationships are:
+
+* Issue A is caused by previous fix made for issue B (A is a child of B);
+* Issue A describes the same problem as issue B (A is a duplicate of B);
+* Issues A and B relate to the same piece of code, functionality etc., in the sense that the fix for one of these issues will affect the other (A is related to B)
+
+When the fix made for one issue also resolves  another one, these issues should be marked as related or duplicate.
+In general, the duplicate issue should have the same status, and, when closed, be marked as fixed in the same OCCT version, as the main one.
+
+@subsection  occt_contribution_nonstd_patch Submission of a change as a patch
+  
+In some cases (if Git is not accessible for the contributor), external contributions can be submitted as a patch file (generated by *diff* command) or as modified sources attached to the Mantis issue.
+The OCCT version, for which the patch is generated, should be clearly specified (e.g. as hash code of Git commit if the patch is based on an intermediate state of the master).
+  
+@note Such contributions should be put to Git by someone else (e.g. the **Reviewer**), this may cause delay in their processing.
+  
+@subsection occt_contribution_nonstd_rebase Updating branches in Git
+
+Updates of the existing branch (e.g. taking into account the remarks of the **Reviewer**, or fixing regressions) should be provided as new commits on top of previous state of the branch.
+
+It is allowed to rebase the branch on the new state of the master and push it to the repository under the same name (with <i>--force</i> option) provided that the original sequence of commits is preserved.
+
+When a change is squashed into a single commit (e.g. to be submitted for review), it should be pushed into a branch a with different name.
+
+The recommended approach is to add a numeric suffix (index) indicating the version of the change, e.g. "CR12345_5".
+Usually it is worth keeping a non-squashed branch in Git for reference.
+
+To avoid confusions, the branch corresponding to the latest version of the change should have a greater index.
+
+@note Make sure to revise the commit message after squashing a branch, to keep it meaningful and comprehensive.
+
+@subsection occt_contribution_nonstd_minor Minor corrections
+
+In some cases review remarks or results of testing require only minor corrections to be done in the branch containing a change.
+"Minor" implies that the correction does not impact the functionality and does not affect the description of the previously committed change.
+
+As an exception to general @ref occt_contribution_workflow_fix_git "single-commit rule", it is allowed to put such minor corrections on top of the existing branch as a separate commit, and re-submit it for further processing in the same branch, without squashing.
+
+Minor commits should have a single-line message starting with //.
+These messages will be ignored when the branch is squashed at integration.
+
+Typical cases of minor corrections are:
+
+* Amendments of test cases (including those made by the **Tester** to adjust a test script to a specific platform);
+* Trivial corrections of compilation warnings (such as removal of an unused variable);
+* Addition or correction of comments or documentation;
+* Corrections of code formatting (e.g. reversion of irrelevant formatting changes made in the main commit).
+
+@subsection occt_contribution_nonstd_autofix Handling non-reproducible issues
+
+Investigation of each issue starts with reproducing it on current development version (master).
+
+If it cannot be reproduced on the current master, but can be reproduced on one of previous releases (or previous state of the master), it is considered as solved by a change made for another issue.
+If that "fixing" issue can be identified (e.g. by parsing Git log), it should be set as related to that issue.
+The issue should be switched to **FEEDBACK** and assigned to the **Bugmaster** for further processing.
+
+The **Bugmaster** decides whether it is necessary to create a test case for that issue, and if so may assign it to the **Developer** or the **Tester** to create a test.
+The issue then follows the standard workflow.
+
+Otherwise, if the issue is fixed in one of previous releases, the **Bugmaster** closes it setting the appropriate value in **Fixed in Version** field, or, if the issue is fixed after the last release, switches it to **VERIFIED** status.
+
+If the issue cannot be reproduced due to an unclear description, missing data, etc., it should be assigned back to the **Reporter** in **FEEDBACK** status, requesting for more information.
+The **Reporter** should provide additional information within one month; after that time, if no new information is provided, the issue should be closed by the **Bugmaster** with resolution **Unable to reproduce**. 
+
+@section occt_contribution_app Appendix: Issue attributes
+
+@subsection occt_contribution_app_category Category
+
+The category corresponds to the component of OCCT where the issue is found:
+    
+  |              Category        |                       Component                        |
+  | :--------------------------- | :----------------------------------------------------- |
+  | OCCT:Foundation Classes      | Foundation Classes module                              |
+  | OCCT:Modeling Data           | Modeling Data classes                                  |
+  | OCCT:Modeling Algorithms     | Modeling Algorithms, except shape healing and meshing  |
+  | OCCT:Shape Healing           | Shape Healing component (TKShapeHealing)               |
+  | OCCT:Mesh                    | BRepMesh algorithm                                     |
+  | OCCT:Data Exchange           | Data Exchange module                                   |
+  | OCCT:Visualization           | Visualization module                                   |
+  | OCCT:Application Framework   | OCAF                                                   |
+  | OCCT:DRAW                    | DRAW Test Harness                                      |
+  | OCCT:Tests                   | Automatic Test System                                  |
+  | OCCT:Documentation           | Documentation                                          |
+  | OCCT:Coding                  | General code quality                                   |
+  | OCCT:Configuration           | Configuration, build system, etc.                      |
+  | OCCT:Releases                | Official OCCT releases                                 |
+  | Website:Tracker              | OCCT Mantis issue tracker, tracker.dev.opencascade.org |
+  | Website:Portal               | OCCT development portal, dev.opencascade.org           |
+  | Website:Git                  | OCCT Git repository, git.dev.opencascade.org           |
+
+
+@subsection occt_contribution_app_severity Severity
 
   Severity shows at which extent the issue affects the product. 
   The list of used severities is given in the table below in the descending order.
   
-  | Severity    |                  Description                      | Weight for Bug Score |
-  | :---------- | :------------------------------------------------ | :------------------: |
-  | crash       | Crash of the application or OS, loss of data      |          5           |
-  | block       | Regression corresponding to the previously  delivered official version. Impossible  operation of a function on any data with no work-around. Missing function previously requested in software requirements specification.   Destroyed data.     |        4            |
-  | major       | Impossible operation of a function with existing work-around. Incorrect operation of a function on a particular dataset. Impossible operation of a function after intentional input of incorrect data. Incorrect behavior of a function   after intentional input of incorrect data.  | 3 |
-  | minor       | Incorrect behavior of a function corresponding  to the description in software requirements specification. Insufficient performance  of a function.          |   2     |
-  | tweak       | Ergonomic inconvenience, need of light updates.   |          1           |
-  | text        | Inconsistence of program code to the Coding Standard. Errors in source text  (e.g.  unnecessary variable declarations, missing   comments, grammatical errors in user manuals). | 1 |
-  | trivial     | Cosmetic bugs.                                    |          1           |
-  | feature     | Bug fix, new feature, improvement that requires workload estimation and validation. | 1 |   
-  | integration request | Requested integration of an existing feature into the product.               |          0           |
-  | Just a question       | A question to be processed, without need   of any changes in the product.        |         0                |
+  | Severity    |                  Description                      |
+  | :---------- | :------------------------------------------------ |
+  | crash       | Crash of the application or OS, loss of data      |
+  | block       | Regression corresponding to the previously  delivered official version. Impossible  operation of a function on any data with no work-around. Missing function previously requested in software requirements specification.   Destroyed data. |
+  | major       | Impossible operation of a function with existing work-around. Incorrect operation of a function on a particular dataset. Impossible operation of a function after intentional input of incorrect data. Incorrect behavior of a function   after intentional input of incorrect data. |
+  | minor       | Incorrect behavior of a function corresponding  to the description in software requirements specification. Insufficient performance  of a function. |
+  | tweak       | Ergonomic inconvenience, need of light updates. |
+  | text        | Non-conformance of the program code to the Coding Rules, mistakes and non-functional errors in the source text  (e.g. unnecessary variable declarations, missing comments, grammatical errors in user manuals). |
+  | trivial     | Cosmetic issues.                                    |
+  | feature     | Request for a new feature or improvement. |
+  | integration request | Requested integration of an existing feature into the product. |
+  | just a question       | A question to be processed, without need   of any changes in the product. |
 
-@subsubsection occt_contribution_workflow_3_1_2 Statuses of issues
+@subsection occt_contribution_app_status Status
 
   The bug statuses that can be applied to the issues are listed in the table below. 
   
   | Status               |  Description                                                        |
   | :------------------- | :----------------------------------------- |
-  | New                  | New just registered issue. Testing case should be created by Reporter. |
-  | Feedback             | The issue requires more information; the original posters should pay attention. |
+  | New                  | A new, just registered issue. |
+  | Acknowledged         | Can be used to mark the issue as postponed. |
+  | Confirmed            | Can be used to mark the issue as postponed. |
+  | Feedback             | The issue requires more information or a specific action. |
   | Assigned             | Assigned to a developer.  |
-  | Resolved + a resolution  |    The issue has been fixed, and now is waiting for revision.  |
-  |Revised  + a resolution   | The issue has been revised, and now is waiting for testing. |
+  | Resolved             | The issue has been fixed, and now is waiting for review.  |
+  | Reviewed             | The issue has been reviewed, and now is waiting for testing (or being tested). |
   | Tested               | The fix has been internally tested by the tester with success on the full non-regression database or its part and a test case has been created for this issue. |
   | Verified             | The fix has been integrated into the master of the corresponding repository |
-  | Closed               | The fix has been integrated to the master. The corresponding test case has been executed successfully. The issue is no longer reproduced. |
+  | Closed + resolution  | The fix has been integrated to the master. The corresponding test case has been executed successfully. The issue is no longer reproduced. |
 
-@subsubsection occt_contribution_workflow_3_1_3 Resolutions
+@subsection occt_contribution_app_resolution Resolution
 
-  **Resolution** is set when the bug is resolved. "Reopen" resolution is added automatically when the bug is reopened.
+  **Resolution** is set when the bug is closed. "Reopen" resolution is added automatically when the bug is reopened.
 
   | Resolution            |                               Description                                    |
   |:--------------------- | :--------------------------------------------------------------------------- |
-  | Open                  | The issue is being processed.                                                |
+  | Open                  | The issue is pending.                                                        |
   | Fixed                 | The issue has been successfully fixed.                                       |
   | Reopened              | The bug has been reopened because of insufficient fix or regression.         |
-  | Unable to reproduce   | The bug is not reproduced.                                |
-  | Not fixable           | The bug cannot be fixed because it is a bug of third party software, or because it requires more workload than it can be allowed.        |
+  | Unable to reproduce   | The bug is not reproduced.                                                   |
+  | Not fixable           | The bug cannot be fixed because e.g. it is a bug of third party software, OS or hardware limitation, etc. |
   | Duplicate             | The bug for the same issue already exists in the tracker.                    |
-  | Not a bug             | It is a normal behavior in accordance with the specification of the product  |
-  | No change required    | The issue didn’t require any change of the product, such as a question issue |
-  | Suspended             | This resolution is set for Acknowledged status only. It means that the issue is waiting for fix until a special administrative decision is taken (e.g. a budget is not yet set in accordance with the contract)       | 
-  | Documentation updated | The issue was a normal behavior of the product, but the actions of the user  were wrong. The specification and the user manual have been updated  to reflect this issue.    |
-  | Won’t fix             | An administrative/contractual decision has been taken to not fix the bug     |
-
-@subsection occt_contribution_workflow_3_2 Update and evolution of documentation
-
-  The documentation on Open CASCADE Technology currently exists in three forms:
-  
-  * OCCT Technical Documentation generated automatically with Doxygen tool on the basis of comments in CDL or HXX files.    
-  * User’s Reference Documentation on OCCT packages and Products supplied in the form of PDF User’s guides
-  * OCCT Release Documentation supplied in the form of Release Notes with each release.
-  
-  It is strictly required to properly report the improvements and changes introduced in OCCT in all three forms of Documentation.
-  
-@subsubsection occt_contribution_workflow_3_2_1 Maintenance of CDL files
-
-  Every developer providing a contribution to the source code of OCC 
-  should make a relevant change in the corresponding header file, including CDL.
-
-  Making the appropriate comments is mandatory in the following cases:
-  
-  * Development of a new package / class / method / enumeration;
-  * Modification of an existing package / class / method / enumeration that changes its behavior;
-  * Modification / new development impacts at other packages / classes / methods / enumerations, the documentation  which of should be modified correspondingly.  
-
-  The only case when the comments may be not required is introducing 
-  a modification that does not change the existing behavior in any noticeable way
-  or brings the behavior in accordance with the existing description.
-  
-  CDL description must be in good English, containing as much relevant 
-  information and as clear as possible. If the developer is unable to properly formulate 
-  his ideas in English or suspects that his description can be misunderstood, 
-  he should address to the Documentation Engineer for language assistance. 
-  Such action is completely subject to the discretion of the developer; however, 
-  the Documentation Engineer can require that the developer should provide a relevant 
-  technical documentation and reopen a bug until all documentation satisfies the requirements above.
-
-@subsubsection occt_contribution_workflow_3_2_2 Maintenance of the User’s Reference Documentation
-
-  The User’s Reference Documentation is distributed among a number of User’s Guides, 
-  each describing a certain module of OCCT. 
-  The User's Guides do not cover the entire functionality of OCCT; 
-  however, they describe most widely used and important packages.
-  
-  In most aspects the User's Guides present the information that is contained in CDL descriptions for methods, classes, etc., only from a different point of view. Thus, it is required that any developer who implements a new or modifies an existing package / class / method / enumeration and adds a description of new development or changes in the corresponding CDL file should also check if this class  package / class / method / enumeration or the package / class, to which the added class / method belongs is already described in the documentation and update the User’s Reference Documentation correspondingly.
-
-3.2.3. Preparation of the Release Documentation
-
-  Before changing the bug Status to RESOLVED, the developer should provide a description of the implemented work using the "Additional information and documentation updates" field of Mantis bugtracker. 
-  
-  This description is used for the Release Documentation and has the following purposes:
-  
-  * to inform the OCCT users about the main features and improvements implemented in the platform in the release;
-  * to give a complete and useable list of changes introduced into the OCCT since the latest version. 
-
-  The changes should be described from the user’s viewpoint so that the text 
-  could be comprehensible even for beginners having a very vague idea about OCCT. 
-  If the developer is unable to properly formulate his ideas in English or suspects 
-  that his description can be misunderstood, he should address to the Documentation Engineer 
-  for language assistance. Such action is completely subject to the discretion of the developer; 
-  however, the Documentation Engineer can require that the developer 
-  should provide a relevant technical documentation and reopen a bug 
-  until all documentation satisfies the requirements.
-
-  **Note**, that it is required to single out the changes in the OCCT behavior as compared to the previous versions and especially the changes to be considered when porting from the previous version of OCCT.
-
-For example: 
-*  If global macros XXX() was used in the code of your application, revise it for direct use of the argument stream object. 
-*  You might need to revise the code related to text display in 3d viewer to take into account new approach of using system fonts via XXX library. 
-
-  The **Documentation Engineer** is responsible for preparation of the version Release Notes 
-  and update of the User’s Guides. If the **Documentation Engineer** considers that the description currently provided by the **Developer** is somehow inadequate or unsatisfactory he can demand the **Developer** to rewrite the documentation with the **Documentation Engineer’s** assistance.
+  | Not a bug             | It is a normal behavior in accordance with the specification of the product. |
+  | No change required    | The issue didn’t require any change of the product, such as a question issue.|
+  | Suspended             | The issue is postponed (for Acknowledged status).                            |
+  | Documentation updated | The documentation has been updated to resolve a misunderstanding causing the issue. |
+  | Won’t fix             | It is decided to keep the existing behavior.                                     |

dox/dev_guides/debug/debug.md

@@ -59,8 +59,8 @@ const char* DBRep_Set (const char* theNameStr, void* theShapePtr)
 ~~~~~
 
 Sets the specified shape as a value of DRAW interpreter variable with the given name.
-- *theNameStr* - the DRAW interpreter variable name to set.
-- *theShapePtr* - a pointer to *TopoDS_Shape* variable.
+- *theNameStr* -- the DRAW interpreter variable name to set.
+- *theShapePtr* -- a pointer to *TopoDS_Shape* variable.
 
 ~~~~~
 const char* DrawTrSurf_Set (const char* theNameStr, void* theHandlePtr)
@@ -69,10 +69,10 @@ const char* DrawTrSurf_SetPnt2d (const char* theNameStr, void* thePnt2dPtr)
 ~~~~~
 
 Sets the specified geometric object as a value of DRAW interpreter variable with the given name.
-- *theNameStr* - the DRAW interpreter variable name to set.
-- *theHandlePtr* - a pointer to the geometric variable (Handle to *Geom_Geometry* or *Geom2d_Curve* or descendant) to be set.
-- *thePntPtr* - a pointer to the variable of type *gp_Pnt* to be set.
-- *thePnt2dPtr* - a pointer to the variable of type *gp_Pnt2d* to be set.
+- *theNameStr* -- the DRAW interpreter variable name to set.
+- *theHandlePtr* -- a pointer to the geometric variable (Handle to *Geom_Geometry* or *Geom2d_Curve* or descendant) to be set.
+- *thePntPtr* -- a pointer to the variable of type *gp_Pnt* to be set.
+- *thePnt2dPtr* -- a pointer to the variable of type *gp_Pnt2d* to be set.
 
 All these functions are defined in *TKDraw* toolkit and return a string indicating the result of execution.
 
@@ -85,8 +85,8 @@ const char* BRepTools_Write (const char* theFileNameStr, void* theShapePtr)
 ~~~~~
 
 Saves the specified shape to a file with the given name.
-- *theFileNameStr* - the name of the file where the shape is saved.
-- *theShapePtr* - a pointer to *TopoDS_Shape* variable.
+- *theFileNameStr* -- the name of the file where the shape is saved.
+- *theShapePtr* -- a pointer to *TopoDS_Shape* variable.
 
 ~~~~~
 const char* BRepTools_Dump (void* theShapePtr)
@@ -94,7 +94,7 @@ const char* BRepTools_DumpLoc (void* theShapePtr)
 ~~~~~
 
 Dumps shape or its location to cout.
-- *theShapePtr* - a pointer to *TopoDS_Shape* variable.
+- *theShapePtr* -- a pointer to *TopoDS_Shape* variable.
 
 The following function is provided by *TKMesh* toolkit:
 
@@ -103,8 +103,8 @@ const char* BRepMesh_Dump (void* theMeshHandlePtr, const char* theFileNameStr)
 ~~~~~
 
 Stores mesh produced in parametric space to BREP file.
-- *theMeshHandlePtr* - a pointer to *Handle(BRepMesh_DataStructureOfDelaun)* variable.
-- *theFileNameStr* - the name of the file where the mesh is stored.
+- *theMeshHandlePtr* -- a pointer to *Handle(BRepMesh_DataStructureOfDelaun)* variable.
+- *theFileNameStr* -- the name of the file where the mesh is stored.
 
 The following additional function is provided by *TKGeomBase* toolkit:
 
@@ -113,7 +113,7 @@ const char* GeomTools_Dump (void* theHandlePtr)
 ~~~~~
 
 Dump geometric object to cout.
-- *theHandlePtr* - a pointer to the geometric variable (<i>Handle</i> to *Geom_Geometry* or *Geom2d_Curve* or descendant) to be set.
+- *theHandlePtr* -- a pointer to the geometric variable (<i>Handle</i> to *Geom_Geometry* or *Geom2d_Curve* or descendant) to be set.
 
 @section occt_debug_vstudio Using Visual Studio debugger 
 

dox/dev_guides/debug/occt.natvis

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <AutoVisualizer xmlns="http://schemas.microsoft.com/vstudio/debugger/natvis/2010">
-  <Type Name="gp_XY">
+<Type Name="gp_XY">
     <DisplayString>[{(float)x} {(float)y}]</DisplayString>
   </Type>
   <Type Name="gp_Pnt2d">
@@ -40,18 +40,25 @@
   </Type>
   <Type Name="Handle_Standard_Transient">
     <DisplayString Condition="entity==0x00000000">NULL</DisplayString>
-    <DisplayString Condition="entity!=0x00000000">[count={entity->count}]</DisplayString>
+    <DisplayString Condition="entity!=0x00000000">[cnt={entity->count}]</DisplayString>
     <Expand>
       <ExpandedItem>*entity</ExpandedItem>
     </Expand>
   </Type>
   <Type Name="NCollection_Handle&lt;*&gt;">
     <DisplayString Condition="entity==0x00000000">NULL</DisplayString>
-    <DisplayString Condition="entity!=0x00000000">[count={entity->count}]</DisplayString>
+    <DisplayString Condition="entity!=0x00000000">{(void*)entity} [cnt={entity->count}]</DisplayString>
     <Expand>
       <ExpandedItem>*((NCollection_Handle&lt;$T1&gt;::Ptr*)entity)->myPtr</ExpandedItem>
     </Expand>
   </Type>
+  <Type Name="opencascade::handle&lt;*&gt;">
+    <DisplayString Condition="entity==0x00000000">NULL</DisplayString>
+    <DisplayString Condition="entity!=0x00000000">{(void*)entity} [cnt={entity->count} {*entity}]</DisplayString>
+    <Expand>
+      <ExpandedItem>(opencascade::handle&lt;$T1&gt;::element_type*)entity</ExpandedItem>
+    </Expand>
+  </Type>
   <Type Name="TCollection_AsciiString">
     <DisplayString>{mylength}: {mystring,s}</DisplayString>
   </Type>
@@ -101,6 +108,17 @@
       </LinkedListItems>
     </Expand>
   </Type>
+  <Type Name="NCollection_Sequence&lt;*&gt;">
+    <DisplayString>NCollection_Sequence [{mySize}]</DisplayString>
+    <Expand>
+      <LinkedListItems>
+        <Size>mySize</Size>
+        <HeadPointer>myFirstItem</HeadPointer>
+        <NextPointer>myNext</NextPointer>
+        <ValueNode>*($T1*)(sizeof(NCollection_SeqNode) + ((char *)this))</ValueNode>
+      </LinkedListItems>
+    </Expand>
+  </Type>
   <Type Name="Bnd_B2f">
     <AlternativeType Name="Bnd_B2d"></AlternativeType>
     <DisplayString Condition="myCenter[0] &gt; 1000000000000000000.">VOID</DisplayString>
@@ -143,4 +161,97 @@
   <Type Name="OpenGl_Context">
     <DisplayString>[{myGlVerMajor}.{myGlVerMinor}]</DisplayString>
   </Type>
+
+<!--ArrayItems Expansion-->
+<Type Name="TColStd_Array1OfInteger">
+    <DisplayString Condition="isAllocated != 1">empty</DisplayString> 
+    <DisplayString>{{size = {myUpperBound - myLowerBound + 1}}}</DisplayString>
+    <Expand>
+        <Item Condition="isAllocated == 1" Name="[size]">myUpperBound - myLowerBound + 1</Item>
+        <ArrayItems Condition="isAllocated == 1">
+            <Size>myUpperBound - myLowerBound + 1</Size>
+            <ValuePointer>(Standard_Integer*)(myStart) + myLowerBound</ValuePointer>
+        </ArrayItems>
+    </Expand>
+</Type>
+
+<Type Name="TColStd_Array1OfReal">
+    <DisplayString Condition="isAllocated != 1">empty</DisplayString> 
+    <DisplayString>{{size = {myUpperBound - myLowerBound + 1}}}</DisplayString>
+    <Expand>
+        <Item Condition="isAllocated == 1" Name="[size]">myUpperBound - myLowerBound + 1</Item>
+        <ArrayItems Condition="isAllocated == 1">
+            <Size>myUpperBound - myLowerBound + 1</Size>
+            <ValuePointer>(Standard_Real*)(myStart) + myLowerBound</ValuePointer>
+        </ArrayItems>
+    </Expand>
+</Type>
+
+<!--Multi-dimensional Arrays-->
+<Type Name="TColStd_Array2OfInteger">
+    <DisplayString Condition="(myUpperColumn == myLowerColumn) &amp;&amp; (myUpperRow == myLowerRow)">empty</DisplayString>
+    <DisplayString>extent = {(myUpperColumn-myLowerColumn+1) * (myUpperRow-myLowerRow+1)}</DisplayString>
+</Type>
+
+
+<!--LinkedListItems Expansion-->
+<Type Name="TColStd_ListNodeOfListOfInteger">
+    <DisplayString>{{current = {myValue}}}</DisplayString>
+    <Expand>
+        <LinkedListItems>
+            <HeadPointer>this</HeadPointer>
+            <NextPointer>(TColStd_ListNodeOfListOfInteger*)myNext</NextPointer>
+            <ValueNode>this-&gt;myValue</ValueNode>
+        </LinkedListItems>
+    </Expand>
+</Type>
+
+<Type Name="TColStd_ListOfInteger">
+    <DisplayString Condition="myFirst == 0">empty</DisplayString>
+    <Expand>
+        <Item Name="values">(TColStd_ListNodeOfListOfInteger*)(myFirst)</Item>
+    </Expand>
+</Type>
+
+<Type Name="TColStd_ListNodeOfListOfReal">
+    <DisplayString>{{current = {myValue}}}</DisplayString>
+    <Expand>
+        <LinkedListItems>
+            <HeadPointer>this</HeadPointer>
+            <NextPointer>(TColStd_ListNodeOfListOfReal*)myNext</NextPointer>
+            <ValueNode>this-&gt;myValue</ValueNode>
+        </LinkedListItems>
+    </Expand>
+</Type>
+
+<Type Name="TColStd_ListOfReal">
+    <DisplayString Condition="myFirst == 0">empty</DisplayString>
+    <Expand>
+        <Item Name="values">(TColStd_ListNodeOfListOfReal*)(myFirst)</Item>
+    </Expand>
+</Type>
+
+<Type Name="BRep_ListOfCurveRepresentation">
+    <DisplayString Condition="myFirst == 0">empty</DisplayString>
+    <Expand>
+        <Item Name="values">(BRep_ListNodeOfListOfCurveRepresentation*)(myFirst)</Item>
+    </Expand>
+</Type>
+
+<Type Name="TopoDS_Shape">
+    <DisplayString>{myOrient} {myTShape} loc={myLocation}</DisplayString>
+</Type>
+
+<Type Name="TopoDS_TShape">
+    <DisplayString>subshapes={myShapes} flags={myFlags}</DisplayString>
+</Type>
+
+<Type Name="BOPDS_Pave">
+    <DisplayString>{{{myIndex} {myParameter}}}</DisplayString>
+</Type>
+
+<Type Name="BOPDS_PaveBlock">
+    <DisplayString>edge={myEdge} orig={myOriginalEdge} pave1={myPave1} pave2={myPave2} extpaves={myExtPaves}</DisplayString>
+</Type>
+
 </AutoVisualizer>

dox/dev_guides/documentation/documentation.md

@@ -37,8 +37,8 @@ Follow the instructions to proceed (define proxy settings if needed, select a mi
 
 **MathJax** is used for rendering math formulas in browser (HTML and CHM outputs): http://www.mathjax.org.
 
-By default MathJAX scripts and fonts are taken from http://cdn.mathjax.org/mathjax/latest and no installation of MathJAX is necessary if Internet is accessible.
-If you need to use OCCT documentation while off-line, you can install a local copy of MatJAX, see http://www.mathjax.org/download/.
+By default MathJAX scripts and fonts work on-line and no installation of MathJAX is necessary if Internet is accessible.
+If you need to use OCCT documentation while off-line, you can install a local copy of MatJAX, see https://docs.mathjax.org/en/v2.6-latest/start.html#installing-your-own-copy-of-mathjax.
 See \ref OCCT_DM_SECTION_A_9 for more details on inserting mathematical expressions. 
 
 @section OCCT_DM_SECTION_2_1 Documentation Generation
@@ -117,16 +117,16 @@ If you want to use the same image for several documents, you can place it in *do
 
 
 The documentation is generated in subfolder *doc* :
-* *html* - a directory for generated HTML pages;
-* *pdf* - a directory for generated PDF files.
+* *html* -- a directory for generated HTML pages;
+* *pdf* -- a directory for generated PDF files.
 
 @section  OCCT_DM_SECTION_4 Adding a New Document
 
 Place a new document in the folder taking into account its logical position in the documentation hierarchy. For instance, the document *svn.md* about the use of SVN to work with OCCT source code can be placed into <i>/dox/dev_guides/</i>. 
 
 If there are images in the document, it should be placed in its own folder containing a subfolder for images. For instance:
-* <i> /dox/dev_guides/svn/ </i> - for *svn.md* file;
-* <i> /dox/dev_guides/svn/images/ </i> - for images.
+* <i> /dox/dev_guides/svn/ </i> -- for *svn.md* file;
+* <i> /dox/dev_guides/svn/images/ </i> -- for images.
 
 Add a relative path to *svn.md* in file <i>dox/FILES.txt</i>. For instance
 
@@ -136,7 +136,7 @@ dev_guides/svn/svn.md
 
 **Note** that the order of paths to documents in *FILES.txt* is reproduced in the Table of Contents in the HTML output. Please, place them logically.
 
-**Note** that you should specify a file tag, not the document name. See <a href="#OCCT_DM_SECTION_A_1">Header section</a> for details.
+**Note** that you should specify a file tag, not the document name. See @ref OCCT_DM_SECTION_A_1 "Header and hierarchic document structure" section for details.
 
 @section  OCCT_DOC_SECTION_5 Additional Resources
 
@@ -168,9 +168,9 @@ The table of contents, page numbers (in PDF), and figure numbers (in PDF) are ge
 @subsection  OCCT_DM_SECTION_A_1 Headers and hierarchic document structure
 
 Headers of different levels can be specified with the following tags:
-* <i>\@section</i> - for the first-level headers; 
-* <i>\@subsection</i> - for the second level headers;
-* <i>\@subsubsection</i> - for the third level headers.
+* <i>\@section</i> -- for the first-level headers; 
+* <i>\@subsection</i> -- for the second level headers;
+* <i>\@subsubsection</i> -- for the third level headers.
 
 For example:
 

dox/dev_guides/git_guide/git_guide.md

@@ -66,7 +66,7 @@ The official repository contains:
   Integration of contributions that have passed certification testing is made exclusively by the Bugmaster. 
   Normally this is made by rebasing the contribution branch on the current master 
   and squashing it into a single commit. This is made to have the master branch history plain and clean, 
-  following the general rule “one issue – one commit”. 
+  following the general rule “one issue -- one commit”. 
   The description of the commit integrated to the master branch is taken from the Mantis issue 
   (ID, 'Summary', followed by the information from 'Documentation' field if present).
   
@@ -97,25 +97,14 @@ The official repository contains:
 
 @subsubsection occt_gitguide_2_1_1 Installation of Git for Windows
 
-  Download Git for Windows distributive from http://code.google.com/p/msysgit/downloads/list.
+  Download Git for Windows distributive from https://git-for-windows.github.io/
   During the installation:
 
-  * Select Windows Explorer integration options:
-    * Git Bash Here
-    * Git GUI Here
-    
-@image html OCCT_GitGuide_V2_image001.png
-@image latex OCCT_GitGuide_V2_image001.png
-
-  * To avoid a mess in your PATH, we recommend selecting ‘Run Git from Windows Prompt’ in the environment settings dialog: 
-  
-@image html OCCT_GitGuide_V2_image002.png
-@image latex OCCT_GitGuide_V2_image002.png
-
+  * Check-in "Windows Explorer integration" options:
+    * "Git Bash Here";
+    * "Git GUI Here".
+  * To avoid a mess in your PATH, we recommend selecting "Run Git from Windows Prompt" in the environment settings dialog: 
   * In "Configuring the line ending conversions" dialog, select "Checkout Windows-style, commit Unix style endings".
-  
-@image html OCCT_GitGuide_V2_image003.png
-@image latex OCCT_GitGuide_V2_image003.png
  
   Note that by default Git user interface is localized to the system default language. 
   If you prefer to work with the English interface, remove or rename .msg localization file 
@@ -128,15 +117,12 @@ The official repository contains:
   Download TortoiseGit distributive from http://code.google.com/p/tortoisegit/downloads/list. 
   Launch the installation.
 
-  * Select your SSH client. Choose OpenSSH if you prefer to use command-line tools 
-   for SSH keys generation, or TortoisePLink if you prefer to use GUI tool (PuttyGen, see 3.2):
-   
-@image html OCCT_GitGuide_V2_image004.png
-@image latex OCCT_GitGuide_V2_image004.png
-
-  * Complete the installation.
+ * Select your SSH client. Choose option 
+	  * "OpenSSH, Git default SSH Client" if you prefer to use command-line tools for SSH keys generation, or
+	  * "TortoisePLink, coming from Putty, integrates with Windows better" if you prefer to use GUI tool (PuttyGen, see 3.2).
+ * Complete the installation.
   
-  TortoiseGit integrates to Windows Explorer, thus it is possible to use context menu in Windows Explorer to access its functionality:  
+  TortoiseGit integrates into Windows Explorer, thus it is possible to use context menu in Windows Explorer to access its functionality:  
   
 @image html OCCT_GitGuide_V2_image005.png
 @image latex OCCT_GitGuide_V2_image005.png
@@ -236,8 +222,8 @@ The official repository contains:
   
   On Windows, make sure to note the complete path to the generated files (the location of your $HOME might be not obvious). Two key files will be created in the specified location (by default in $HOME/.ssh/):
   
-  * *id_rsa* - private key
-  * *id_rsa.pub* - public key
+  * *id_rsa* -- private key
+  * *id_rsa.pub* -- public key
   
   The content of the public key file (one text line) is the key to be added to the user account on the site (see below).
 
@@ -250,11 +236,10 @@ The official repository contains:
 @subsection occt_gitguide_3_3 Adding public key in your account
 
 Log in on the portal http://dev.opencascade.org and click on **My account** link to the right. If you have a Contributor status, you will see **SSH keys** tab to the right. 
+
 Click on that tab, then click **Add a public key**, and paste the text of the public key (see above sections on how to generate the key) into the text box. 
-  Click **Save** to input the key to the system. 
-  
-@image html OCCT_GitGuide_V2_image008.png
-@image latex OCCT_GitGuide_V2_image008.png  
+
+Click **Save** to input the key to the system. 
 
   Note that a user can have several SSH keys. 
   You can distinguish between these keys by the Title field ID; by default it is taken from SSH key comment. 
@@ -280,8 +265,7 @@ Click on that tab, then click **Add a public key**, and paste the text of the pu
 
   * Create a new branch for your development, basing on the selected version of the sources 
    (usually the current master) and switch your working copy to it
-  * Develop and test your change. Note that for the first time, and after any changes 
-   made in CDL files you will have to re-generate build scripts or Visual Studio projects using WOK. 
+  * Develop and test your change.
   * Do as many commits in your branch as you feel convenient; 
    the general recommendation is to commit every stable state (even incomplete), to record the history of your development.
   * Push your branch to the repository when your development is complete or when you need to share it with other people (e.g. for review)
@@ -335,10 +319,6 @@ In the console:
 In TortoiseGit: 
   * Go to the local copy of the repository. 
   * Right-click in the Explorer window, then choose **Git Create Branch**.
-  
-@image html OCCT_GitGuide_V2_image011.png
-@image latex OCCT_GitGuide_V2_image011.png
-
   * Select **Base On** Branch *remotes/origin/master*.  
 
 @image html OCCT_GitGuide_V2_image012.png
@@ -377,7 +357,7 @@ In TortoiseGit:
     > git commit -a -m "Write meaningful commit message here"
 ~~~~~
 
-  Option –a tells the command to automatically include (stage) files 
+  Option -a tells the command to automatically include (stage) files 
   that have been modified or deleted, but it will omit the new files that might have been added by you. 
   To commit such new files, you must add (stage) them before commit command.
 
@@ -456,7 +436,7 @@ Note that Git forbids pushing a branch if the corresponding remote branch alread
 @image html OCCT_GitGuide_V2_image019.png
 @image latex OCCT_GitGuide_V2_image019.png
 
-Note that the local branches of your repository are the primary place, where your changes are stored until they get integrated to the official version of OCCT (master branch). The branches submitted to official repository are for collaborative work, review, and integration - that repository should not be used for long-term storage of incomplete changes. 
+Note that the local branches of your repository are the primary place, where your changes are stored until they get integrated to the official version of OCCT (master branch). The branches submitted to official repository are for collaborative work, review, and integration -- that repository should not be used for long-term storage of incomplete changes. 
   
 Remove the local branches that you do not need any more. Note that you cannot delete the current branch. It means that you need to switch to another one (e.g. master) if the branch you are going to delete is the current one.
   
@@ -539,7 +519,7 @@ To rebase your branch into a single commit, you need to do the following:
 
   Use of TortoiseGit is recommended for convenient code review:
 
-  * Fetch the changes from the remote repository as described in <a href="#occt_gitguide_4_7">Synchronizing with remote repository</a> section.   
+  * Fetch the changes from the remote repository as described in @ref occt_gitguide_4_7 "Synchronizing with remote repository" section.   
   * Right-click on the repository, choose **TortoiseGit** -> **Show** log;
   * Locate the remote branch you need to review;
   * To review commits one-by-one, select each commit in the log. The list of changed files is shown at the bottom of the window; double-click on the file will open visual compare tool.

dox/dev_guides/tests/tests.md

@@ -3,15 +3,15 @@
 
 @tableofcontents
 
-@section testmanual_1 Introduction
+@section testmanual_intro Introduction
 
 This document provides OCCT developers and contributors with an overview and practical guidelines for work with OCCT automatic testing system.
 
 Reading the Introduction should be sufficient for developers to use the test system to control non-regression of the modifications they implement in OCCT. Other sections provide a more in-depth description of the test system, required for modifying the tests and adding new test cases. 
 
-@subsection testmanual_1_1 Basic Information
+@subsection testmanual_intro_basic Basic Information
 
-OCCT automatic testing system is organized around DRAW Test Harness @ref occt_user_guides__test_harness "DRAW Test Harness", a console application based on Tcl (a scripting language) interpreter extended by OCCT-related commands.
+OCCT automatic testing system is organized around @ref occt_user_guides__test_harness "DRAW Test Harness", a console application based on Tcl (a scripting language) interpreter extended by OCCT-related commands.
 
 Standard OCCT tests are included with OCCT sources and are located in subdirectory *tests* of the OCCT root folder. Other test folders can be included in the test system, e.g. for testing applications based on OCCT.
 
@@ -21,9 +21,10 @@ The tests are organized in three levels:
   * Grid: a set of test cases within a group, usually aimed at testing some particular aspect or mode of execution of the relevant functionality (e.g. buildevol);
   * Test case: a script implementing an individual test (e.g. K4).
   
-See <a href="#testmanual_5_1">Test Groups</a> for the current list of available test groups and grids.
+See @ref testmanual_5_1 "Test Groups" chapter for the current list of available test groups and grids.
 
-Some tests involve data files (typically CAD models) which are located separately and are not included with OCCT code. The archive with publicly available test data files should be downloaded and installed independently on OCCT sources (see http://dev.opencascade.org).
+@note Many tests involve data files (typically CAD models) which are located separately and (except a few) are not included with OCCT code. 
+These tests will be skipped if data files are not available.
 
 @subsection testmanual_1_2 Intended Use of Automatic Tests
 
@@ -98,10 +99,10 @@ Example:
     Detailed logs are saved in D:/occt/results_2012-06-04T0919
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The tests are considered as non-regressive if only OK, BAD (i.e. known problem), and SKIPPED (i.e. not executed, typically because of lack of a data file) statuses are reported. See <a href="#testmanual_3_5">Interpretation of test results</a> for details.
+The tests are considered as non-regressive if only OK, BAD (i.e. known problem), and SKIPPED (i.e. not executed, typically because of lack of a data file) statuses are reported. See @ref testmanual_details_results "Interpretation of test results" for details.
 
 The results and detailed logs of the tests are saved by default to a new subdirectory of the subdirectory *results* in the current folder, whose name is generated automatically using the current date and time, prefixed by Git branch name (if Git is available and current sources are managed by Git).
-If necessary, a non-default output directory can be specified using option <i> –outdir</i> followed by a path to the directory. This directory should be new or empty; use option <i>–overwrite</i> to allow writing results in the existing non-empty directory. 
+If necessary, a non-default output directory can be specified using option <i> -outdir</i> followed by a path to the directory. This directory should be new or empty; use option <i>-overwrite</i> to allow writing results in the existing non-empty directory. 
 
 Example:
 ~~~~~
@@ -109,6 +110,14 @@ Draw[]> testgrid -outdir d:/occt/last_results -overwrite
 ~~~~~
 In the output directory, a cumulative HTML report <i>summary.html</i> provides links to reports on each test case. An additional report in JUnit-style XML format can be output for use in Jenkins or other continuous integration system.
 
+To re-run the test cases, which were detected as regressions on the previous run, option <i>-regress dirname</i> should be used.
+<i>dirname</i> is a path to the directory containing the results of the previous run. Only the test cases with *FAILED* and *IMPROVEMENT* statuses will be tested.
+
+Example:
+~~~~~
+Draw[]> testgrid -regress d:/occt/last_results
+~~~~~
+
 Type <i>help testgrid</i> in DRAW prompt to get help on options supported by *testgrid* command:
 
 ~~~~~
@@ -122,8 +131,10 @@ testgrid: Run all tests, or specified group, or one grid
     -overwrite: force writing logs in existing non-empty directory
     -xml filename: write XML report for Jenkins (in JUnit-like format)
     -beep: play sound signal at the end of the tests
-    Groups, grids, and test cases to be executed can be specified by list of file 
-    masks, separated by spaces or comma; default is all (*).
+    -regress dirname: re-run only a set of tests that have been detected as regressions on the previous run.
+                      Here "dirname" is a path to the directory containing the results of the previous run.
+    Groups, grids, and test cases to be executed can be specified by the list of file 
+    masks separated by spaces or commas; default is all (*).
 ~~~~~
 
 @subsubsection testmanual_1_3_3 Running a Single Test
@@ -165,31 +176,31 @@ test: Run specified test case
         This key will be ignored if the "-echo" key is already set.
 ~~~~~
 
-@subsubsection testmanual_1_3_4 Creating a New Test
+@subsubsection testmanual_intro_quick_create Creating a New Test
 
-The detailed rules of creation of new tests are given in <a href="#testmanual_3">section 3</a>. The following short description covers the most typical situations:
+The detailed rules of creation of new tests are given in @ref testmanual_3 "Creation and modification of tests" chapter. The following short description covers the most typical situations:
 
 Use prefix <i>bug</i> followed by Mantis issue ID and, if necessary, additional suffixes, for naming the test script, data files, and DRAW commands specific for this test case.
 
 1.	If the test requires C++ code, add it as new DRAW command(s) in one of files in *QABugs* package. 
-2.	Add script(s) for the test case in the subfolder corresponding to the relevant OCCT module of the group *bugs* <i>($CASROOT/tests/bugs)</i>. See <a href="#testmanual_5_2">the correspondence map</a>.
+2.	Add script(s) for the test case in the subfolder corresponding to the relevant OCCT module of the group *bugs* <i>($CASROOT/tests/bugs)</i>. See @ref testmanual_5_2 "the correspondence map".
 3.	In the test script:
 	*	Load all necessary DRAW modules by command *pload*.
 	*	Use command *locate_data_file* to get a path to data files used by test script. (Make sure to have this command not inside catch statement if it is used.)
-	*	Use DRAW commands to reproduce the situation being tested.
-	*	Make sure that in case of failure the test produces message containing word "Error" or other recognized by test system as error (add new error patterns in file parse.rules if necessary).
-	*	If test case reports error due to existing problem and the fix is not available, add @ref testmanual_3_6 "TODO" statement for each error to mark it as known problem. The TODO statements must be specific so as to match the actually generated messages but not all similar errors.
-	*	To check expected output which should be obtained as a result of a test, add @ref testmanual_3_7 "REQUIRED" statement for each line of output to mark it as required.
-	*	If test case produces error messages (contained in parse.rules) which are expected in that test and should not be considered as its failure (e.g. test for checkshape command), add REQUIRED statement for each error to mark it as required output.
-4.	If the test uses data file(s) not yet present in the test database, these can be put to (sub)directory pointed out by *CSF_TestDataPath* variable for running test. The files should be attached to Mantis issue corresponding to the modification being tested.
-5.	Check that the test case runs as expected (test for fix: OK with the fix, FAILED without the fix; test for existing problem: BAD), and integrate to Git branch created for the issue.
+	*	Use DRAW commands to reproduce the tested situation.
+	*	Make sure that in case of failure the test produces a message containing word "Error" or other recognized by the test system as error (add new error patterns in file parse.rules if necessary).
+	*	If the test case reports error due to an existing problem and the fix is not available, add @ref testmanual_3_6 "TODO" statement for each error to mark it as a known problem. The TODO statements must be specific so as to match the actually generated messages but not all similar errors.
+	*	To check expected output which should be obtained as the test result, add @ref testmanual_3_7 "REQUIRED" statement for each line of output to mark it as required.
+	*	If the test case produces error messages (contained in parse.rules), which are expected in that test and should not be considered as its failure (e.g. test for *checkshape* command), add REQUIRED statement for each error to mark it as required output.
+4.	If the test uses data file(s) that are not yet present in the test database, it is possible to put them to (sub)directory pointed out by *CSF_TestDataPath* variable for running test. The files should be attached to the Mantis issue corresponding to the tested modification.
+5.	Check that the test case runs as expected (test for fix: OK with the fix, FAILED without the fix; test for existing problem: BAD), and integrate it to the Git branch created for the issue.
 
 Example:
 
 * Added files:
 
 ~~~~~
-git status –short
+git status -short
 A tests/bugs/heal/data/bug210_a.brep
 A tests/bugs/heal/data/bug210_b.brep
 A tests/bugs/heal/bug210_1
@@ -288,7 +299,7 @@ This file is a TCL script. It is executed after every test in the current group.
 
 Note: *TEST COMPLETED* string should be present in the output to indicate that the test is finished without crash. 
 
-See <a href="#testmanual_3">section 3</a> for more information.
+See @ref testmanual_3 "Creation and modification of tests" chapter for more information.
 
 Example:
 ~~~~~
@@ -306,7 +317,7 @@ The test group may contain *parse.rules* file. This file defines patterns used f
 
 Each line in the file should specify a status (single word), followed by a regular expression delimited by slashes (*/*) that will be matched against lines in the test output log to check if it corresponds to this status.
 
-The regular expressions should follow <a href="http://www.tcl.tk/man/tcl/TclCmd/re_syntax.htm">Tcl syntax</a>, with special exception that "\b" is considered as word limit (Perl-style), in addition to "\y" used in Tcl.
+The regular expressions should follow <a href="http://www.tcl.tk/man/tcl/TclCmd/re_syntax.htm">Tcl syntax</a>, with a special exception that "\b" is considered as word limit (Perl-style), in addition to "\y" used in Tcl.
 
 The rest of the line can contain a comment message, which will be added to the test report when this status is detected.
 
@@ -321,7 +332,7 @@ Example:
 
 Lines starting with a *#* character and blank lines are ignored to allow comments and spacing.
 
-See <a href="#testmanual_3_5">Interpretation of test results</a> chapter for details.
+See @ref testmanual_details_results "Interpretation of test results" chapter for details.
 
 If a line matches several rules, the first one applies. Rules defined in the grid are checked first, then rules in the group, then rules in the test root directory. This allows defining some rules on the grid level with status *IGNORE* to ignore messages that would otherwise be treated as errors due to the group level rules.
 
@@ -334,7 +345,7 @@ Example:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 @subsubsection testmanual_2_2_6  Directory "data"
-The test group may contain subdirectory *data*, where test scripts shared by different test grids can be put. See also <a href="#testmanual_2_3_5">Directory *data*</a>.
+The test group may contain subdirectory *data*, where test scripts shared by different test grids can be put. See also @ref testmanual_2_3_5 "Directory data".
 
 @subsection testmanual_2_3 Test Grids
 
@@ -440,7 +451,7 @@ This section describes how to add new tests and update existing ones.
 
 The new tests are usually added in the frame of processing issues in OCCT Mantis tracker. 
 Such tests in general should be added to group bugs, in the grid 
-corresponding to the affected OCCT functionality. See <a href="#testmanual_5_2">Mapping of OCCT functionality to grid names in group *bugs*</a>.
+corresponding to the affected OCCT functionality. See @ref testmanual_5_2 "Mapping of OCCT functionality to grid names in group bugs".
 
 New grids can be added as necessary to contain tests for the functionality not yet covered by existing test grids. 
 The test case name in the bugs group should be prefixed by the ID of the corresponding issue in Mantis (without leading zeroes) with prefix *bug*. It is recommended to add a suffix providing a hint on the tested situation. If more than one test is added for a bug, they should be distinguished by suffixes; either meaningful or just ordinal numbers.
@@ -560,10 +571,10 @@ Other Tcl variables defined during the test execution are:
 
 In order to ensure that the test works as expected in different environments, observe the following additional rules:
 * Avoid using external commands such as *grep, rm,* etc., as these commands can be absent on another system (e.g. on Windows); use facilities provided by Tcl instead.
-* Do not put call to *locate_data_file* in catch statement – this can prevent correct interpretation of the missing data file by the test system.
+* Do not put call to *locate_data_file* in catch statement -- this can prevent correct interpretation of the missing data file by the test system.
 * Do not use commands *decho* and *dlog* in the test script, to avoid interference with use of these commands by the test system.
 
-@subsection testmanual_3_5 Interpretation of test results
+@subsection testmanual_details_results Interpretation of test results
 
 The result of the test is evaluated by checking its output against patterns defined in the files *parse.rules* of the grid and group.
 
@@ -621,8 +632,8 @@ puts "TODO OCC22817 All: TEST INCOMPLETE"
 
 @subsection testmanual_3_7 Marking required output
 
-To check expected output which must be obtained as a result of a test for it to be considered correct, add REQUIRED statement for each specific message.
-For that, the following statement should be added to such a test script:
+To check the obtained test output matches the expected results considered correct, add REQUIRED statement for each specific message.
+For that, the following statement should be added to the corresponding test script:
 
 ~~~~~
 puts "REQUIRED ListOfPlatforms: RegularExpression"
@@ -630,11 +641,11 @@ puts "REQUIRED ListOfPlatforms: RegularExpression"
 
 Here *ListOfPlatforms* and *RegularExpression* have the same meaning as in TODO statements described above.
 
-The REQUIRED statament can also be used to mask message that would normally be interpreted as error (according to rules defined in *parse.rules*) but should not be considered as such within current test.
+The REQUIRED statement can also be used to mask the message that would normally be interpreted as error (according to the rules defined in *parse.rules*) but should not be considered as such within the current test.
 
 Example:
 ~~~~~
-puts "TODO REQUIRED Linux: Faulty shapes in variables faulty_1 to faulty_5"
+puts "REQUIRED Linux: Faulty shapes in variables faulty_1 to faulty_5"
 ~~~~~
 
 This statement notifies test system that errors reported by *checkshape* command are expected in that test case, and test should be considered as OK if this message appears, despite of presence of general rule stating that 'Faulty' signals failure.
@@ -695,15 +706,15 @@ testdiff dir1 dir2 [groupname [gridname]] [options...]
 Here *dir1* and *dir2* are directories containing logs of two test runs.
 
 Possible options are:
-* <i>-save \<filename\> </i> - saves the resulting log in a specified file (<i>$dir1/diff-$dir2.log</i> by default). HTML log is saved with the same name and extension .html;
-* <i>-status {same|ok|all}</i> - allows filtering compared cases by their status:
-	* *same* - only cases with same status are compared (default);
-	* *ok*   - only cases with OK status in both logs are compared;
-	* *all*  - results are compared regardless of status;
-* <i>-verbose \<level\> </i> - defines the scope of output data:
-	* 1 - outputs only differences;
-	* 2 - additionally outputs the list of logs and directories present in one of directories only;
-	* 3 - (by default) additionally outputs progress messages;
+* <i>-save \<filename\> </i> -- saves the resulting log in a specified file (<i>$dir1/diff-$dir2.log</i> by default). HTML log is saved with the same name and extension .html;
+* <i>-status {same|ok|all}</i> -- allows filtering compared cases by their status:
+	* *same* -- only cases with same status are compared (default);
+	* *ok*   -- only cases with OK status in both logs are compared;
+	* *all*  -- results are compared regardless of status;
+* <i>-verbose \<level\> </i> -- defines the scope of output data:
+	* 1 -- outputs only differences;
+	* 2 -- additionally outputs the list of logs and directories present in one of directories only;
+	* 3 -- (by default) additionally outputs progress messages;
 
 Example:
 
@@ -750,9 +761,9 @@ This group allows testing Boolean operations.
 DRAW module: MODELING (packages *BOPTest* and *BRepTest*).
 
 Grids names are based on name of the command used, with suffixes: 
-* <i>_2d</i> – for tests operating with 2d objects (wires, wires, 3d objects, etc.); 
-* <i>_simple</i> – for tests operating on simple shapes (boxes, cylinders, toruses, etc.);
-* <i>_complex</i> – for tests dealing with complex shapes.
+* <i>_2d</i> -- for tests operating with 2d objects (wires, wires, 3d objects, etc.); 
+* <i>_simple</i> -- for tests operating on simple shapes (boxes, cylinders, toruses, etc.);
+* <i>_complex</i> -- for tests dealing with complex shapes.
 
 | Grid	| Commands	| Functionality |
 | :---- | :----- | :------- | 
@@ -786,7 +797,7 @@ Grids names are based on name of the command used, with suffixes:
 This group allows testing cases coming from Mantis issues.
 
 The grids are organized following OCCT module and category set for the issue in the Mantis tracker. 
-See <a href="#testmanual_5_2">Mapping of OCCT functionality to grid names in group *bugs*</a> for details.
+See @ref testmanual_5_2 "Mapping of OCCT functionality to grid names in group bugs" chapter for details.
 
 @subsubsection testmanual_5_1_5 caf
 
@@ -1055,6 +1066,7 @@ Error : Number of faults is UNSTABLE
 ~~~~~
 
 @subsubsection testmanual_5_3_2 Shape tolerance
+
 The maximal tolerance of sub-shapes of each kind of the resulting shape can be extracted from output of tolerance command as follows:
 
 ~~~~~
@@ -1069,10 +1081,10 @@ It is possible to use command *checkmaxtol* to check maximal tolerance of shape
 Use: checkmaxtol shape [options...]
 
 Allowed options are:
- *   -ref: reference value of maximum tolerance
- *   -source: list of shapes to compare with
- *   -min_tol: minimum tolerance for comparison
- *   -multi_tol: tolerance multiplier
+ *   <i>-ref</i> -- reference value of maximum tolerance;
+ *   <i>-source</i> -- list of shapes to compare with;
+ *   <i>-min_tol</i> -- minimum tolerance for comparison;
+ *   <i>-multi_tol</i> -- tolerance multiplier.
 
 The default syntax of *checkmaxtol* command for comparison with the reference value:
 ~~~~~
@@ -1111,9 +1123,10 @@ if { abs($area - $expected) > 0.1 + 0.01 * abs ($area) } {
 
 @subsubsection testmanual_5_3_4 Memory leaks
 
-The test system measures the amount of memory used by each test case, and considerable deviations (as well as overall difference) comparing with reference results will be reported by *testdiff* command.
+The test system measures the amount of memory used by each test case. Considerable deviations (as well as the overall difference) in comparison with reference results can be reported by command *testdiff*  (see @ref testmanual_4_4).
 
-The typical approach to checking memory leak on a particular operation is to run this operation in cycle measuring memory consumption at each step and comparing it with some threshold value. Note that file begin in group bugs defines command *checktrend* that can be used to analyze a sequence of memory measurements to get statistically based evaluation of the leak presence.
+To check memory leak on a particular operation, run it in a cycle, measure the memory consumption at each step and compare it with a threshold value.
+The command *checktrend* (defined in *tests/bugs/begin*) can be used to analyze a sequence of memory measurements and to get a statistically based evaluation of the leak presence.
 
 Example: 
 ~~~~~
@@ -1132,7 +1145,7 @@ for {set i 1} {$i < 100} {incr i} {
 
 @subsubsection testmanual_5_3_5 Visualization
 
-Take a snapshot of the viewer, give it the name of the test case, and save in the directory indicated by Tcl variable *imagedir*. 
+The following command sequence allows you to take a snapshot of the viewer, give it the name of the test case, and save in the directory indicated by Tcl variable *imagedir*. 
 
 ~~~~~
 vinit
@@ -1146,27 +1159,71 @@ vdump $imagedir/${casename}_shading.png
 
 This image will be included in the HTML log produced by *testgrid* command and will be checked for non-regression through comparison of images by command *testdiff*.
 
+Also it is possible to use command *checkview* to make a snapshot of the viewer.
+
+Use: checkview [options...]
+Allowed options are:
+*   <i>-display shapename </i>  -- displays shape with name *shapename*;
+*   <i>-3d </i> -- displays shape in 3d viewer;
+*   <i>-2d [ v2d / smallview ] </i> - displays shape in 2d viewer (the default viewer is *smallview*);
+*   <i>-path PATH</i> -- sets the location of the saved viewer screenshot;
+*   <i>-vdispmode N</i> -- sets *vdispmode* for 3d viewer (default value is 1)
+*   <i>-screenshot</i> -- makes a screenshot of already created viewer
+*   The procedure can check a property of shape (length, area or volume) and compare it with value *N*:
+	* <i>-l [N]</i>
+	* <i>-s [N]</i>
+	* <i>-v [N]</i>
+	* If the current property is equal to value *N*, the shape is marked as valid in the procedure.
+	* If value *N* is not given, the procedure will mark the shape as valid if the current property is non-zero.
+*   <i>-with {a b c}</i> -- displays shapes *a, b* and *c* together with the shape (if the shape is valid)
+*   <i>-otherwise {d e f}</i> -- displays shapes *d, e* and *f* instead of the shape (if the shape is NOT valid)
+
+Note that is required to use either option <i> -2d </i> or option <i> -3d</i>.
+
+Examples:
+~~~~~
+checkview -display result -2d -path ${imagedir}/${test_image}.png
+checkview -display result -3d -path ${imagedir}/${test_image}.png
+checkview -display result_2d -2d v2d -path ${imagedir}/${test_image}.png
+~~~~~
+
+~~~~~
+box a 10 10 10
+box b 5 5 5 10 10 10
+bcut result b a
+set result_vertices [explode result v]
+checkview -display result -2d -with ${result_vertices} -otherwise { a b } -l -path ${imagedir}/${test_image}.png
+~~~~~
+
+~~~~~
+box a 10 10 10
+box b 5 5 5 10 10 10
+bcut result b a
+vinit
+vdisplay a b
+vfit
+checkview -screenshot -3d -path ${imagedir}/${test_image}.png
+~~~~~
+
 @subsubsection testmanual_5_3_6 Number of free edges
 
-To check the number of free edges run the command *checkfreebounds*.
-
-It compares number of free edges with reference value.
+Procedure *checkfreebounds* compares the number of free edges with a reference value.
 
 Use: checkfreebounds shape ref_value [options...]
 
 Allowed options are:
- * -tol N: used tolerance (default -0.01)
- * -type N: used type, possible values are "closed" and "opened" (default "closed")
+ * <i>-tol N</i> -- used tolerance (default -0.01);
+ * <i>-type N</i> -- used type, possible values are "closed" and "opened" (default "closed").
 
 ~~~~~
 checkfreebounds result 13
 ~~~~~
 
-Option -tol N is used to set tolerance for command *freebounds*, which is used within command *checkfreebounds*.
+Option <i>-tol N</i> defines tolerance for command *freebounds*, which is used within command *checkfreebounds*.
 
-Option -type N is used to select the type of counted free edges - closed or opened.
+Option <i>-type N</i> is used to select the type of counted free edges: closed or open.
 
-If the number of free edges in the resulting shape is unstable, reference value should be set to "-1".
+If the number of free edges in the resulting shape is unstable, the reference value should be set to "-1".
 As a result command *checkfreebounds* will return the following error:
 
 ~~~~~
@@ -1176,7 +1233,7 @@ Error : Number of free edges is UNSTABLE
 
 @subsubsection testmanual_5_3_7 Compare numbers
 
-Procedure to check equality of two reals with some tolerance (relative and absolute)
+Procedure *checkreal* checks the equality of two reals with a tolerance (relative and absolute).
 
 Use: checkreal name value expected tol_abs tol_rel
 
@@ -1186,11 +1243,12 @@ checkreal "Some important value" $value 5 0.0001 0.01
 
 @subsubsection testmanual_5_3_8 Check number of sub-shapes
 
-Compare number of sub-shapes in "shape" with given reference data
+Procedure *checknbshapes* compares the number of sub-shapes in "shape" with the given reference data.
 
 Use: checknbshapes shape [options...]
+
 Allowed options are:
- * -vertex N
+ * <i>-vertex N
  * -edge N
  * -wire N
  * -face N
@@ -1199,9 +1257,9 @@ Allowed options are:
  * -compsolid N
  * -compound N
  * -shape N
- * -t: compare the number of sub-shapes in "shape" counting
+ * -t</i> -- compares the number of sub-shapes in "shape" counting
       the same sub-shapes with different location as different sub-shapes.
- * -m msg: print "msg" in case of error
+ * <i>-m msg</i> -- prints "msg" in case of error
 
 ~~~~~
 checknbshapes result -vertex 8 -edge 4
@@ -1209,18 +1267,127 @@ checknbshapes result -vertex 8 -edge 4
 
 @subsubsection testmanual_5_3_9 Check pixel color
 
-To check pixel color command *checkcolor* can be used.
+Command *checkcolor* can be used to check pixel color.
 
 Use: checkcolor x y red green blue
 
-  x y - pixel coordinates
+where:
+ * <i>x, y</i> -- pixel coordinates;
+ * <i>red green blue</i> -- expected pixel color (values from 0 to 1).
 
-  red green blue - expected pixel color (values from 0 to 1)
-
-This procedure checks color with tolerance (5x5 area)
+This procedure checks color with tolerance (5x5 area).
 
 Next example will compare color of point with coordinates x=100 y=100 with RGB color R=1 G=0 B=0.
 If colors are not equal, procedure will check the nearest ones points (5x5 area)
 ~~~~~
 checkcolor 100 100 1 0 0
 ~~~~~
+
+@subsubsection testmanual_5_3_10 Compute length, area and volume of input shape
+
+Procedure *checkprops* computes length, area and volume of the input shape.
+
+Use: checkprops shapename [options...]
+
+Allowed options are:
+ * <i>-l LENGTH</i> -- command *lprops*, computes the mass properties of all edges in the shape with a linear density of 1;
+ * <i>-s AREA</i> -- command *sprops*, computes the mass properties of all faces with a surface density of 1; 
+ * <i>-v VOLUME</i> -- command *vprops*, computes the mass properties of all solids with a density of 1;
+ * <i>-eps EPSILON</i> -- the epsilon defines relative precision of computation;
+ * <i>-equal SHAPE</i> -- compares area, volume and length of input shapes. Puts error if they are not equal;
+ * <i>-notequal SHAPE</i> -- compares area, volume and length of input shapes. Puts error if they are equal.
+
+Options <i> -l, -s </i> and <i> -v</i> are independent and can be used in any order. Tolerance *epsilon* is the same for all options.
+
+~~~~~
+checkprops result -s 6265.68 
+checkprops result -s -equal FaceBrep
+~~~~~
+
+@subsubsection testmanual_5_3_11 Parse output dump and compare it with reference values
+
+Procedure *checkdump* is used to parse output dump and compare it with reference values.
+
+Use: checkdump shapename [options...]
+
+Allowed options are:
+ * <i>-name NAME</i> -- list of parsing parameters (e.g. Center, Axis, etc.);
+ * <i>-ref VALUE</i> -- list of reference values for each parameter in *NAME*; 
+ * <i>-eps EPSILON</i> -- the epsilon defines relative precision of computation.
+
+~~~~~
+checkdump result -name {Center Axis XAxis YAxis Radii} -ref {{-70 0} {-1 -0} {-1 -0} {0 -1} {20 10}} -eps 0.01
+~~~~~
+
+@subsubsection testmanual_5_3_12 Compute length of input curve
+
+Procedure *checklength* computes length of the input curve.
+
+Use: checklength curvename [options...]
+  
+Allowed options are:
+ * <i>-l LENGTH</i> -- command *length*, computes the length of the input curve with precision of computation;
+ * <i>-eps EPSILON</i> -- the epsilon defines a relative precision of computation;
+ * <i>-equal CURVE</i> -- compares the length of input curves. Puts error if they are not equal;
+ * <i>-notequal CURVE</i> -- compares the length of input curves. Puts error if they are equal.
+
+~~~~~
+checklength cp1 -l 7.278
+checklength res -l -equal ext_1
+~~~~~
+@subsubsection testmanual_5_3_13 Check maximum deflection, number of triangles and nodes in mesh
+
+Command *checktrinfo* can be used to to check the maximum deflection, as well as the number of nodes and triangles in mesh.
+
+Use: checktrinfo shapename [options...]
+
+Allowed options are:
+ * <i>-tri [N]</i> --  compares the current number of triangles in *shapename* mesh with the given reference data.
+      If reference value N is not given and the current number of triangles is equal to 0, procedure *checktrinfo* will print an error.
+ * <i>-nod [N]</i> --  compares the current number of nodes in *shapename* mesh with the given reference data.
+      If reference value N is not given and the current number of nodes is equal to 0, procedure *checktrinfo* will print an error.
+ * <i>-defl [N]</i> -- compares the current value of maximum deflection in *shapename* mesh with the given reference data.
+      If reference value N is not given and current maximum deflection is equal to 0, procedure *checktrinfo* will print an error.
+ * <i>-max_defl N</i> --     compares the current value of maximum deflection in *shapename* mesh with the max possible value.
+ * <i>-tol_abs_tri N</i> --  absolute tolerance for comparison of number of triangles (default value 0).
+ * <i>-tol_rel_tri N</i> --  relative tolerance for comparison of number of triangles (default value 0).
+ * <i>-tol_abs_nod N</i> --  absolute tolerance for comparison of number of nodes (default value 0).
+ * <i>-tol_rel_nod N</i> --  relative tolerance for comparison of number of nodes (default value 0).
+ * <i>-tol_abs_defl N</i> -- absolute tolerance for deflection comparison (default value 0).
+ * <i>-tol_rel_defl N</i> -- relative tolerance for deflection comparison (default value 0).
+ * <i>-ref [trinfo a]</i> -- compares deflection, number of triangles and nodes in *shapename* and *a*.
+
+Note that options <i> -tri, -nod </i> and <i> -defl </i> do not work together with option <i> -ref</i>.
+
+Examples:
+
+Comparison with some reference values:
+~~~~~
+checktrinfo result -tri 129 -nod 131 -defl 0.01
+~~~~~
+
+Comparison with another mesh:
+~~~~~
+checktrinfo result -ref [tringo a]
+~~~~~
+
+Comparison of deflection with the max possible value:
+~~~~~
+checktrinfo result -max_defl 1
+~~~~~
+
+Check that the current values are not equal to zero:
+~~~~~
+checktrinfo result -tri -nod -defl
+~~~~~
+
+Check that the number of triangles and the number of nodes are not equal to some specific values:
+~~~~~
+checktrinfo result -tri !10 -nod !8
+~~~~~
+
+It is possible to compare current values with reference values with some tolerances.
+Use options <i>-tol_\* </i> for that.
+~~~~~
+checktrinfo result -defl 1 -tol_abs_defl 0.001
+~~~~~

dox/dev_guides/upgrade/upgrade.md

@@ -5,53 +5,349 @@ Upgrade from older OCCT versions  {#occt_dev_guides__upgrade}
 
 @section upgrade_intro Introduction
 
-This document provides technical details on changes made in particular versions of OCCT, and is aimed to help upgrading user applications based on previous versions of OCCT to newer ones.
+This document provides technical details on changes made in particular versions of OCCT. It can help to upgrade user applications based on previous versions of OCCT to newer ones.
 
 @subsection upgrade_intro_precautions Precautions
 
-Back-up your code before upgrade.
-We strongly recommend using version control system during upgrade process, saving one or several commits for each step of upgrade, until overall result is verified.
-This will facilitate identification and correction of possible problems that can occur on intermediate steps of upgrade.
-Carefully document each step to be able to repeat it if necessary.
+Back-up your code before the upgrade.
+We strongly recommend using version control system during the upgrade process and saving one or several commits at each step of upgrade, until the overall result is verified.
+This will facilitate identification and correction of possible problems that can occur at the intermediate steps of upgrade.
+It is advisable to document each step carefully to be able to repeat it if necessary.
 
 @subsection upgrade_intro_disclaim Disclaimer
 
-This document describes known issues that have been encountered in porting of OCCT and some applications, and approaches that helped to resolve these issues in known cases.
+This document describes known issues that have been encountered during porting of OCCT and some applications and approaches that have helped to resolve these issues in known cases.
 It does not pretend to cover all possible migration issues that can appear in your application.
-Please take this document with discretion; apply your expertise and knowledge of your application to ensure correct result. 
+Take this document with discretion; apply your expertise and knowledge of your application to ensure the correct result. 
 
-The automatic upgrade tool is provided as-is, without warranty of any kind, and we explicitly disclaim any liability for possible errors that may appear due to use of this tool. 
+The automatic upgrade tool is provided as is, without warranty of any kind, and we explicitly disclaim any liability for possible errors that may appear due to use of this tool. 
 It is your responsibility to ensure that the changes you made in your code are correct. 
-When upgrading your code by automatic script, make sure to carefully review the changes made by it, on each step, before committing them.
+When you upgrade the code by an automatic script, make sure to carefully review the introduced changes at each step before committing them.
+
+
+@section upgrade_65 Upgrade to OCCT 6.5.0
+
+Porting of user applications from an earlier OCCT version to version 6.5 requires taking into account the following major changes:
+* If you are not comfortable with dependence on Intel TBB, FreeImage, or Gl2Ps libraries, you will need to (re)build OCCT with these dependencies disabled.
+* The low-level format version of OCAF binary and XML persistence has been incremented. Hence, the files saved by OCCT 6.5 to OCAF binary or XML format will not be readable by previous versions of OCCT.
+* The *BRepMesh* triangulation algorithm has been seriously revised and now tries hard to fulfill the requested deflection and angular tolerance parameters. If you experience any problems with performance or triangulation quality (in particular, display of shapes in shading mode), consider revising the values of these parameters used in your application.
+* If you were using method *ToPixMap()* of class *V3d_View* to get a buffer for passing to Windows API functions (e.g. *BitBlt*), this will not work anymore. You will need to use method *Image_PixMap::AccessBuffer()* to get the raw buffer data that can be further passed to WinAPI functions.
+* As the processing of message gravity parameter in *Message* package has been improved, some application messages (especially the ones generated by IGES or STEP translators) can be suppressed or new messages appear in the application. Use relevant message level parameter to tune this behavior.
+
+@section upgrade_651 Upgrade to OCCT 6.5.1
+
+Porting of user applications from an earlier OCCT version to version 6.5.1 requires taking into account the following major changes:
+
+*	Method *Graphic3d_Structure::Groups()* now returns *Graphic3d_SequenceOfGroup*. If this method has been used, the application code should be updated to iterate another collection type or, if *Graphic3d_HSetOfGroup* is required, to fill its own collection:
+~~~~
+const Graphic3d_SequenceOfGroup& aGroupsSeq = theStructure.Groups();
+Handle(Graphic3d_HSetOfGroup) aGroupSet = new Graphic3d_HSetOfGroup();
+Standard_Integer aLen = aGroupsSeq.Length();
+for (Standard_Integer aGr = 1; aGr <= aLen; ++aGr)
+{
+ aGroupSet->Add (aGroupsSeq.Value (aGr));
+}
+~~~~
+
+* All occurrences of *Select3D_Projector* in the application code (if any) should be replaced with *Handle(Select3D_Projector)*.
+* The code of inheritors of *Select3D_SensitiveEntity* should be updated if they override <i>Matches()</i> (this is probable, if clipping planes are used).
+* Constructor for *V3d_Plane* has been changed, so the extra argument should be removed if used in the application. It is necessary to add a new plane using method *V3d_Viewer::AddPlane()* if *V3d_Viewer* has been used to manage clipping planes list (this does not affect clipping planes representation). Please, have a look at the source code for new DRAWEXE *vclipplane* command in *ViewerTest_ObjectsCommands.cxx, VClipPlane* to see how clipping planes can be managed in the application.
+
+@section upgrade_652 Upgrade to OCCT 6.5.2
+
+Porting of user applications from an earlier OCCT version to version 6.5.2 requires taking into account the following major changes:
+* Any code that has been generated by WOK from CDL generic classes *Tcollection_DataMap* and *Tcollection_IndexedDataMap* needs to be regenerated by WOK to take into account the change in the interface of these classes.
+* The enumerations *CDF_StoreStatus* and *CDF_RetrievableStatus* have been replaced by the enumerations *PCDM_StoreStatus* and *PCDM_ReaderStatus*. Correspondingly, the methods *Open, Save* and *SaveAs* of the class *TDocStd_Application* have changed their return value. Any code, which uses these enumerations, needs to be updated.
+* *BRepLib_MakeFace* has been modified to accept tolerance value for resolution of degenerated edges. This tolerance parameter has no default value to ensure that the client code takes care of passing a meaningful value, not just *Precision::Confusion*, so some porting overheads are expected. 
+* If the callback mechanism in call_togl_redraw function was used in the application code, it is necessary to revise it to take into account the new callback execution and provide a check of reason value of Aspect_GraphicCallbackStruct in callback methods to confirm that the callback code is executed at the right moment. Now the callbacks are executed before redrawing the underlayer, before redrawing the overlayer and at the end of redrawing. The information about the moment when the callback is invoked is provided with the reason value in form of an additional bit flag <i>(OCC_PRE_REDRAW, OCC_PRE_OVERLAY)</i>. The state of OpenGl changed in callback methods will not be restored automatically, which might lead to unwanted behavior in redrawing procedure.
+* The print method used in the application code might need to be revised to take into account the ability to choose between print algorithms: tile and stretch. The stretch algorithm will be selected by default during porting.
+* It is recommended to *BRepMesh_DiscretFactory* users, to check *BRepMesh_DiscretFactory::SetDefault()* return value to determine plugin availability / validity. *BRepMesh_DiscretFactory::Discret()* method now returns handle instead of pointer. The code should be updated in the following manner:
+~~~~
+Handle(BRepMesh_DiscretRoot) aMeshAlgo = BRepMesh_DiscretFactory::Get().Discret (theShape, theDeflection, theAngularToler);
+ if (!aMeshAlgo.IsNull())  {}
+~~~~
+
+* The default state of *BRepMesh* parallelization has been turned off. The user should switch this flag explicitly:
+    *	by using methods *BRepMesh_IncrementalMesh::SetParallel(Standard_True)* for each *BRepMesh_IncrementalMesh* instance before <i>Perform()</i>;
+    *	by calling *BRepMesh_IncrementalMesh::SetParallelDefault(Standard_True)* when *BRepMesh_DiscretFactory* is used to retrieve the meshing tool (this also affects auto-triangulation in *AIS*).
+
+@section upgrade_653 Upgrade to OCCT 6.5.3
+
+Porting of user applications from an earlier OCCT version to version 6.5.3 requires taking into account the following major changes:
+* As a result of code clean-up and redesign of *TKOpenGl* driver, some obsolete functions and rendering primitives <i>(TriangleMesh, TriangleSet, Bezier, Polyline, Polygon, PolygonHoles, QuadrangleMesh</i> and *QuadrangleSet*) have been removed. Instead, the application developers should use primitive arrays that provide the same functionality but are hardware-accelerated. The details can be found in OCCT Visualization User's Guide, “Primitive Arrays” chapter.
+* Applications should not call *AIS_InteractiveObject::SetPolygonOffsets()* method for an instance of *AIS_TexturedShape* class after it has been added to *AIS_InteractiveContext*. More generally, modification of *Graphic3d_AspectFillArea3d* parameters for the computed groups of any *AIS_InteractiveObject* subclass that uses texture mapping should be avoided, because this results in broken texture mapping (see issue 23118). It is still possible to apply non-default polygon offsets to *AIS_TexturedShape* by calling *SetPolygonOffsets()* before displaying the shape.
+* The applications that might have used internal functions provided by *TKOpenGl* or removed primitives will need to be updated.
+* In connection with the implementation of Z-layers it might be necessary to revise the application code or revise the custom direct descendant classes of *Graphic3d_GraphicDriver* and *Graphic3d_StructureManager* to use the Z-layer feature.
+* Global variables *Standard_PI* and *PI* have been eliminated (use macro *M_PI* instead). 
+* Method *HashCode()* has been removed from class *Standard_Transient*. It is advisable to use global function <i>HashCode()</i> for Handle objects instead. 
+* Declaration of operators new/delete for classes has become consistent and is encapsulated in macros.
+* Memory management has been changed to use standard heap <i>(MMGT_OPT=0)</i> and reentrant mode <i>(MMGT_REENTRANT=1)</i> by default.
+* Map classes in *NCollection* package now accept one more argument defining a hash tool.
+
+@section upgrade_654 Upgrade to OCCT 6.5.4
+
+Porting of user applications from an earlier OCCT version to version 6.5.4 requires taking into account the following major changes:
+* The code using obsolete classes *Aspect_PixMap, Xw_PixMap* and *WNT_PixMap* should be rewritten implementing class *Image_PixMap*, which is now retrieved by *ToPixMap* methods as argument. A sample code using *ToPixMap* is given below:
+~~~~
+#include <Image_AlienPixMap.hxx>
+void dump (Handle(V3d_View)& theView3D)
+{
+  Standard_Integer aWndSizeX = 0;
+  Standard_Integer aWndSizeY = 0;
+  theView3D->Window()->Size (aWndSizeX, aWndSizeY);
+  Image_AlienPixMap aPixMap;
+  theView3D->ToPixMap (aPixMap, aWndSizeX, aWndSizeY);
+  aPixMap.Save ("c:\\image.png");
+}
+~~~~
+* Now OpenGL resources related to Interactive Objects are automatically freed when the last view (window) is removed from graphical driver. 
+To avoid presentation data loss, the application should replace an old view with a new one in the proper order: first the new view is created and activated and only then the old one is detached and removed. 
+* It is recommended to use *NCollection* containers with hasher parameter (introduced in 6.5.3) instead of global definition <i>IsEqual()/HashCode()</i> as well as to use explicit namespaces to avoid name collision.
+
+
+@section upgrade_660 Upgrade to OCCT 6.6.0
+
+Porting of user applications from an earlier OCCT version to version 6.6.0 requires taking into account the following major changes:
+* Due to the changes in the implementation of Boolean Operations, the order of sub-shapes resulting from the same operation performed with OCCT 6.5.x and OCCT 6.6.0 can be different. 
+It is necessary to introduce the corresponding changes in the applications for which the order of sub-shapes resulting from a Boolean operation is important. It is strongly recommended to use identification methods not relying on the order of sub-shapes (e.g. OCAF naming).
+* If you need to use OCCT on Mac OS X with X11 (without Cocoa), build OCCT with defined pre-processor macro *CSF_MAC_USE_GLX11*. XLib front-end (previously the only way for unofficial OCCT builds on Mac OS X) is now disabled by default on this platform. If your application has no support for Cocoa framework you may build OCCT with XLib front-end adding *MACOSX_USE_GLX* macro to compiler options (you may check the appropriate option in WOK configuration GUI and in CMake configuration). Notice that XQuartz (XLib implementation for Mac OS X) now is an optional component and does not provide a sufficient level of integrity with native (Cocoa-based) applications in the system. It is not possible to build OCCT with both XLib and Cocoa at the same time due to symbols conflict in OpenGL functions. 
+* Animation mode and degeneration presentation mode (simplified presentation for animation) and associated methods have been removed from 3D viewer functionality.
+Correspondingly, the code using methods *SetAnimationModeOn(), SetAnimationModeOff(), AnimationModeIsOn(), AnimationMode(), Tumble(), SetDegenerateModeOn(), SetDegenerateModeOff()* and *DegenerateModeIsOn()* of classes *V3d_View* and *Visual3d_View* will need to be removed or redesigned. Please, notice that Hidden Line Removal presentation was not affected; however, the old code that used methods *V3d_View::SetDegenerateModeOn* or *V3d_View::SetDegenerateModeOff* to control HLR presentation should be updated to use *V3d_View::SetComputedMode* method instead.
+* Calls of *Graphic3d_Group::BeginPrimitives()* and *Graphic3d_Group::EndPrimitives()* should be removed from the application code.
+* Application functionality for drawing 2D graphics that was formerly based on *TKV2d* API should be migrated to *TKV3d* API. The following changes are recommended for this migration:
+   * A 2D view can be implemented as a *V3d_View* instance belonging to *V3d_Viewer* managed by *AIS_InteractiveContext* instance. To turn *V3d_View* into a 2D view, the necessary view orientation should be set up at the view initialization stage using *V3d_View::SetProj()* method, and view rotation methods simply should not be called.
+   * Any 2D graphic entity (formerly represented with *AIS2D_InteractiveObject*) should become a class derived from *AIS_InteractiveObject* base. These entities should be manipulated in a view using *AIS_InteractiveContext* class API.
+   * All drawing code should be put into *Compute()* virtual method of a custom interactive object class and use API of *Graphic3d* package. In particular, all geometry should be drawn using class hierarchy derived from *Graphic3d_ArrayOfPrimitives*. Normally, the Z coordinate for 2D geometry should be constant, unless the application implements some advanced 2D drawing techniques like e.g. multiple "Z layers" of drawings.
+   * Interactive selection of 2D presentations should be set up inside *ComputeSelection()* virtual method of a custom interactive object class, using standard sensitive entities from *Select3D* package and standard or custom entity owners derived from *SelectMgr_EntityOwner* base.
+Please refer to the Visualization User's Guide for further details concerning OCCT 3D visualization and selection classes. See also *Viewer2D* OCCT sample application, which shows how 2D drawing can be implemented using TKV3d API.
+* Run-time graphic driver library loading mechanism based on *CSF_GraphicShr* environment variable usage has been replaced by explicit linking against *TKOpenGl* library. The code sample below shows how the graphic driver should be created and initialized in the application code: 
+~~~~
+// initialize a new viewer with OpenGl graphic driver
+Handle(Graphic3d_GraphicDriver) aGraphicDriver = 
+new OpenGl_GraphicDriver ("TKOpenGl");
+  aGraphicDriver->Begin (new Aspect_DisplayConnection());
+  TCollection_ExtendedString aNameOfViewer ("Visu3D");
+  Handle(V3d_Viewer) aViewer 
+= new V3d_Viewer (aGraphicDriver, aNameOfViewer.ToExtString());
+  aViewer->Init();
+
+// create a new window or a wrapper over the existing window, 
+// provided by a 3rd-party framework (Qt, MFC, C# or Cocoa)
+#if defined(_WIN32) || defined(__WIN32__)
+  Aspect_Handle aWindowHandle = (Aspect_Handle )winId();
+  Handle(WNT_Window) aWindow = new WNT_Window (winId());
+#elif defined(__APPLE__) && !defined(MACOSX_USE_GLX)
+  NSView* aViewHandle = (NSView* )winId();
+  Handle(Cocoa_Window) aWindow = new Cocoa_Window (aViewHandle);
+#else
+ Aspect_Handle aWindowHandle = (Aspect_Handle )winId();
+  Handle(Xw_Window) aWindow = 
+     new Xw_Window (aGraphicDriver->GetDisplayConnection(), aWindowHandle);
+#endif // WNT
+
+// setup the window for a new view
+  Handle(V3d_View) aView = aViewer->CreateView();
+  aView->SetWindow (aWindow);
+~~~~
+
+* The following changes should be made in the application-specific implementations of texture aspect:
+    * *Graphic3d_TextureRoot* inheritors now should return texture image by overloading of *Graphic3d_TextureRoot::GetImage()* method instead of the old logic.
+    * Now you can decide if the application should store the image copy as a field of property or reload it dynamically each time (to optimize the memory usage). The default implementation (which loads the image content from the provided file path) does not hold an extra copy since it will be uploaded to the graphic memory when first used.
+    * Notice that the image itself should be created within *Image_PixMap* class from *AlienImage* package, while *Image_Image* class is no more supported and will be removed in the next OCCT release.
+	
+@section upgrade_670 Upgrade to OCCT 6.7.0
+
+Porting of user applications from an earlier OCCT version to version 6.7.0 requires taking into account the following major changes.
+
+@subsection upgrade_670_clipping Object-level clipping and capping algorithm. 
+
+* It might be necessary to revise and port code related to management of view-level clipping to use *Graphic3d_ClipPlane* instead of *V3d_Plane* instances. Please note that *V3d_Plane* class has been preserved -- as previously, it can be used as plane representation. Another approach to represent *Graphic3d_ClipPlane* in a view is to use custom presentable object.
+* The list of arguments of *Select3D_SensitiveEntity::Matches()* method for picking detection has changed. Since now, for correct selection clipping, the implementations should perform a depth clipping check and return (as output argument) minimum depth value found at the detected part of sensitive. Please refer to CDL / Doxygen documentation to find descriptive hints and snippets.
+* *Select3D_SensitiveEntity::ComputeDepth()* abstract method has been removed. Custom implementations should provide depth checks by method *Matches()* instead -- all data required for it is available within a scope of single method.
+* It might be necessary to revise the code of custom sensitive entities and port *Matches()* and *ComputeDepth()* methods to ensure proper selection clipping. Please note that obsolete signature of *Matches* is not used anymore by the selector. If your class inheriting *Select3D_SensitiveEntity* redefines the method with old signature the code should not compile as the return type has been changed. This is done to prevent override of removed methods.
+
+@subsection upgrade_670_markers Redesign of markers presentation
+
+* Due to the redesign of *Graphic3d_AspectMarker3d* class the code of custom markers initialization should be updated. Notice that you can reuse old markers definition code as *TColStd_HArray1OfByte*; however, *Image_PixMap* is now the preferred way (and supports full-color images on modern hardware).
+* Logics and arguments of methods *AIS_InteractiveContext::Erase()* and *AIS_InteractiveContext::EraseAll()* have been changed. Now these methods do not remove resources from *Graphic3d_Structure*; they simply change the visibility flag in it. Therefore, the code that deletes and reсomputes resources should be revised.
+* *Graphic3d_Group::MarkerSet()* has been removed. *Graphic3d_Group::AddPrimitiveArray()* should be used instead to specify marker(s) array.
+
+@subsection upgrade_670_views Default views are not created automatically 
+
+As the obsolete methods *Init(), DefaultOrthographicView()* and *DefaultPerspectiveView()* have been removed from *V3d_Viewer* class, the two default views are no longer created automatically. It is obligatory to create *V3d_View* instances explicitly, either directly by operator new or by calling *V3d_Viewer::CreateView()*. 
+
+The call *V3d_Viewer::SetDefaultLights()* should also be done explicitly at the application level, if the application prefers to use the default light source configuration. Otherwise, the application itself should set up the light sources to obtain a correct 3D scene.
+
+@subsection upgrade_670_dimensions Improved dimensions implementation
+
+* It might be necessary to revise and port code related to management of *AIS_LengthDimension, AIS_AngleDimension* and *AIS_DiameterDimension* presentations. There is no more need to compute value of dimension and pass it as string to constructor argument. The value is computed internally. The custom value can be set with *SetCustomValue()* method.
+* The definition of units and general aspect properties is now provided by *Prs3d_DimensionUnits* and *Prs3d_DimensionApsect* classes.
+* It might be also necessary to revise code of your application related to usage of *AIS_DimensionDisplayMode enumeration*. If it used for specifying the selection mode, then it should be replaced by a more appropriate enumeration *AIS_DimensionSelectionMode*.
+
+@subsection upgrade_670_list_collection NCollection_Set replaced by List collection 
+
+It might be necessary to revise your application code, which uses non-ordered *Graphic3d_SetOfHClipPlane* collection type and replace its occurrences by ordered *Graphic3d_SequenceOfHClipPlane* collection type.
+
+
+@section upgrade_680 Upgrade to OCCT 6.8.0
+
+Porting of user applications from an earlier OCCT version to version 6.8.0 requires taking into account the following major changes.
+
+@subsection upgrade_680_ncollection Changes in NCollection classes
+
+Method *Assign()* in *NCollection* classes does not allow any more copying between different collection types. Such copying should be done manually.
+
+List and map classes in *NCollection* package now require that their items be copy-constructible, but do not require items to have default constructor. Thus the code using *NCollection* classes for non-copy-constructible objects needs be updated. One option is to provide copy constructor; another possibility is to use Handle or other smart pointer.
+
+@subsection upgrade_680_view_camera 3D View Camera
+
+If *ViewMapping* and *ViewOrientation* were used directly, this functionality has to be ported to the new camera model. The following methods should be considered as an alternative to the obsolete *Visual3d* services (all points and directions are supposed to be in world coordinates):
+* *Graphic3d_Camera::ViewDimensions()* or *V3d_View::Size()/ZSize()* -- returns view width, height and depth (or "Z size"). Since the view is symmetric now, you can easily compute top, bottom, left and right limits. *Graphic3d_Camera::ZNear()/ZFar()* can be used to obtain the near and far clipping distances with respect to the eye.
+* *Graphic3d_Camera::Up()* or *V3d_View::Up()* -- returns Y direction of the view.
+* *Graphic3d_Camera::Direction()* returns the reverse view normal directed from the eye, *V3d_View::Proj()* returns the old-style view normal.
+* *Graphic3d_Camera::Eye()* or *V3d_View::Eye()* -- returns the camera position (same as projection reference point in old implementation).
+* *Graphic3d_Camera::Center()* or *V3d_View::At()* -- returns the point the camera looks at (or view reference point according to old terminology).
+
+The current perspective model is not fully backward compatible, so the old perspective-related functionality needs to be reviewed.
+
+Please revise application-specific custom presentations to provide proper bounding box. Otherwise object might become erroneously clipped by automatic *ZFit* or frustum culling algorithms enabled by default.
+
+@subsection upgrade_680_connected_objects Redesign of Connected Interactive Objects
+
+The new implementation of connected Interactive Objects makes it necessary to take the following steps if you use connected Interactive Objects in your application.
+* Use new *PrsMgr_PresentableObject* transformation API.
+* Call *RemoveChild()* from the original object after connect if you need the original object and *AIS_ConnectedInteractive* to move independently.
+* Access instances of objects connected to *AIS_MultiplyConnectedInteractive* with *Children()* method.
+* For *PrsMgr_PresentableObject* transformation:
+   * *SetLocation (TopLoc_Location) -> SetLocalTransformation (gp_Trsf)*
+   * *Location -> LocalTransformation*
+   * *HasLocation -> HasTransformation*
+   * *ResetLocation -> ResetTransformation*
+   
+@subsection upgrade_680_unicode Support of UNICODE Characters 
+
+Support of UNICODE characters introduced in OCCT breaks backward compatibility with applications, which currently use filenames in extended ASCII encoding bound to the current locale. Such applications should be updated to convert such strings to UTF-8 format.
+
+The conversion from UTF-8 to wchar_t is made using little-endian approach. Thus, this code will not work correctly on big-endian platforms. It is needed to complete this in the way similar as it is done for binary persistence (see the macro *DO_INVERSE* in *FSD_FileHeader.hxx).*
+
+@subsection upgrade_680_projection_shift Elimination of Projection Shift Concept
+
+It might be necessary to revise the application code, which deals with *Center()* method of *V3d_View*. 
+
+This method was used to pan a *V3d* view by virtually moving the screen center with respect to the projection ray passed through Eye and At points. There is no more need to derive the panning from the Center parameter to get a camera-like eye position and look at the coordinates. *Eye()* and *At()* now return these coordinates directly. When porting code dealing with *Center()*, the parameters *Eye()* and *At()* can be adjusted instead. Also *V3d_View::SetCenter(Xpix, Ypix)* method can be used instead of *V3d_View::Center(X, Y)* to center the view at the given point. However, if the center coordinates X and Y come from older OCCT releases, calling *V3d_View::Panning(-X, -Y)* can be recommended to compensate missing projection shift effect.
+
+There are several changes introduced to *Graphic3d_Camera*. The internal data structure of the camera is based on *Standard_Real* data types to avoid redundant application-level conversions and precision errors. The transformation matrices now can be evaluated both for *Standard_Real* and *Standard_ShortReal* value types. *ZNear* and *ZFar* planes can be either negative or positive for orthographic camera projection, providing a trade-off between the camera distance and the range of *ZNear* or *ZFar* to reduce difference of exponents of values composing the orientation matrix - to avoid calculation errors. The negative values can be specified to avoid Z-clipping if the reference system of camera goes inside of the model when decreasing camera distance.
+
+The auto z fit mode, since now, has a parameter defining Z-range margin (the one which is usually passed as argument to *ZFitAll()* method). The methods *SetAutoZFitMode(), AutoZFitScaleFactor()* and *ZFitAll()* from class *V3d_View* deal with the new parameter.
+
+The class *Select3D_Projector* now supports both orientation and projection transformation matrices, which can be naturally set for the projector. The definition of projector was revised in *StdSelect_ViewerSelector3d*: perspective and orthographic projection parameters are handled properly. Orthographic projector is based only on direction of projection - no more *Center* property. This makes it possible to avoid unnecessary re-projection of sensitive while panning, zooming or moving along the projection ray of the view. These operations do not affect the orthographic projection.
+
+
+@section upgrade_690 Upgrade to OCCT 6.9.0
+
+Porting of user applications from an earlier OCCT version to version 6.9.0 requires taking into account the following major changes.
+
+
+@subsection upgrade_690_selection Changes in Selection
+
+Selection mechanism of 3D Viewer has been redesigned to use 3-level BVH tree traverse directly in 3D space instead of projection onto 2D screen space (updated on each rotation). This architectural redesign may require appropriate changes at application level in case if custom Interactive Objects are used.
+
+#### Standard selection
+Usage of standard OCCT selection entities would require only minor updates.
+
+Custom Interactive Objects should implement new virtual method *SelectMgr_SelectableObject::BoundingBox().*
+
+Now the method *SelectMgr_Selection::Sensitive()* does not return *SelectBasics_SensitiveEntity*. It returns an instance of *SelectMgr_SensitiveEntity*, which belongs to a different class hierarchy (thus *DownCast()* will fail). To access base sensitive it is necessary to use method *SelectMgr_SensitiveEntity::BaseSensitive()*. For example:
+
+~~~~
+Handle(SelectMgr_Selection) aSelection = anInteractiveObject->Selection (aMode);
+for (aSelection->Init(); aSelection->More(); aSelection->Next())
+{
+   Handle(SelectBasics_SensitiveEntity) anEntity = aSelection->Sensitive()->BaseSensitive();
+}
+~~~~
+
+#### Custom sensitive entities
+
+Custom sensitive entities require more complex changes, since the selection algorithm has been redesigned and requires different output from the entities. 
+
+The method *SelectBasics_SensitiveEntity::Matches()* of the base class should be overridden following the new signature:
+
+*Standard_Boolean Matches (SelectBasics_SelectingVolumeManager& theMgr, SelectBasics_PickResult& thePickResult)*, where *theMgr* contains information about the currently selected frustum or set of frustums (see *SelectMgr_RectangularFrustum, SelectMgr_TrangularFrustum, SelectMgr_TriangularFrustumSet)* and *SelectBasics_PickResult* is an output parameter, containing information about the depth of the detected entity and distance to its center of geometry.
+
+In the overridden method it is necessary to implement an algorithm of overlap and inclusion detection (the active mode is returned by *theMgr.IsOverlapAllowed()*) with triangular and rectangular frustums.
+
+The depth and distance to the center of geometry must be calculated for the 3D projection of user-picked screen point in the world space. You may use already implemented overlap and inclusion detection methods for different primitives from *SelectMgr_RectangularFrustum* and *SelectMgr_TriangularFrustum*, including triangle, point, axis-aligned box, line segment and planar polygon. 
+
+Here is an example of overlap/inclusion test for a box:
+
+~~~~
+if (!theMgr.IsOverlapAllowed()) // check for inclusion
+{
+  Standard_Boolean isInside = Standard_True;
+  return theMgr.Overlaps (myBox.CornerMin(), myBox.CornerMax(), &isInside) && isInside;
+}
+
+Standard_Real aDepth;
+if (!theMgr.Overlaps (myBox, aDepth)) // check for overlap
+{
+  return Standard_False;
+}
+
+thePickResult =
+SelectBasics_PickResult (aDepth, theMgr.DistToGeometryCenter (myCenter3d));
+~~~~
+
+The interface of *SelectBasics_SensitiveEntity* now contains four new pure virtual functions that should be implemented by each custom sensitive:
+* <i>BoundingBox()</i> – returns a bounding box of the entity;
+* <i>Clear()</i> – clears up all the resources and memory allocated for complex sensitive entities;
+* <i>BVH()</i> – builds a BVH tree for complex sensitive entities, if it is needed;
+* <i>NbSubElements()</i> – returns atomic sub-entities of a complex sensitive entity, which will be used as primitives for BVH building. If the entity is simple and no BVH is required, this method returns 1.
+
+Each sensitive entity now has its own tolerance, which can be overridden by method *SelectBasics_SensitiveEntity::SetSensitivityFactor()* called from constructor.
+
+
+@subsection upgrade_690_adaptor3d-curve Changes in Adaptor3d_Curve class
+
+All classes inheriting *Adaptor3d_Curve* (directly or indirectly) must be updated in application code to use new signature of methods *Intervals()* and *NbIntervals()*. Note that no compiler warning will be generated if this is not done.
+
+@subsection upgrade_690_v3d_view Changes in V3d_View class
+
+The methods *V3d_View::Convert* and *V3d_View::ConvertWithProj()* have ceased to return point on the active grid. It might be necessary to revise the code of your application so that *V3d_View::ConvertToGrid()* was called explicitly for the values returned by *V3d_View::Convert* to get analogous coordinates on the grid. The methods *V3d_View::Convert* and *V3d_View::ConvertWithProj* convert point into reference plane of the view corresponding to the intersection with the projection plane of the eye/view point vector.
 
 @section upgrade_700 Upgrade to OCCT 7.0.0
 
+Porting of user applications from an earlier OCCT version to version 7.0.0 requires taking into account the following major changes.
+
 @subsection upgrade_700_persist Removal of legacy persistence
 
-Legacy persistence for shapes and OCAF data based on Storage_Schema (toolkits TKShapeShcema, TLStdLSchema, TKStdSchema, TKXCAFSchema) has been removed in OCCT 7.0.0.
-Applications that used these persistence tools for their data need to be updated to use other persistence mechanisms.
+Legacy persistence for shapes and OCAF data based on *Storage_Schema* (toolkits *TKPShape*, *TKPLCAF*, *TKPCAF*, *TKShapeShcema, TLStdLSchema, TKStdSchema*, and *TKXCAFSchema*) has been removed in OCCT 7.0.0.
+The applications that used these data persistence tools need to be updated to use other persistence mechanisms.
 
-The existing data files in standard formats can be converted using OCCT 6.9.0 or previous version, as follows.
+@note For compatibility with previous versions, possibility to read standard OCAF data (TKLCAF, TKCAF) from the files stored in old format is preserved (toolkits *TKStdL*, *TKStd*).
+
+The existing data files in standard formats can be converted using OCCT 6.9.1 or a previous version, as follows.
 
 #### CSFDB files
 
 Files in CSFDB format (usually with extension .csfdb) contain OCCT shape data that can be converted to BRep format. 
 The easiest way to do that is to use ImportExport sample provided with OCCT 6.9.0 (or earlier):
 
-- Start ImportExport sample
-- Select File / New
-- Select File / Import / CSFDB... and specify the file to be converted
-- Drag mouse with right button pressed across the view to select all shapes by rectangle
-- Select File / Export / BREP... and specify location and name for the resulting file
+- Start ImportExport sample;
+- Select File / New;
+- Select File / Import / CSFDB... and specify the file to be converted;
+- Drag the mouse with the right button pressed across the view to select all shapes by the rectangle;
+- Select File / Export / BREP... and specify the location and name for the resulting file
 
 #### OCAF and XCAF documents
 
-Files containing OCAF data saved in old format usually have extensions .std or .sgd or .dxc (XDE documents).
-These files can be converted to XML or binary OCAF formats using DRAW Test Harness commands available in OCCT 6.9.0 or earlier.
+Files containing OCAF data saved in the old format usually have extensions <i>.std, .sgd</i> or <i>.dxc</i> (XDE documents).
+These files can be converted to XML or binary OCAF formats using DRAW Test Harness commands.
+Note that if the file contains only attributes defined in TKLCAF and TKCAF, this action can be performed in OCCT 7.0; otherwise OCCT 6.9.1 or earlier should be used.
 
 For that, start *DRAWEXE* and perform the following commands: 
 
-  * for the conversion of the "*.std" and "*.sgd" file formats to the binary format "*.cbf" (Created document should be in **BinOcaf** format instead of **MDTV-Standard**):
+  * To convert <i>*.std</i> and <i>*.sgd</i> file formats to binary format <i>*.cbf</i> (The created document should be in *BinOcaf* format instead of *MDTV-Standard*):
 
   @code
   Draw[]> pload ALL
@@ -60,7 +356,7 @@ For that, start *DRAWEXE* and perform the following commands:
   Draw[]> SaveAs Doc [path to the new file]
   @endcode
 
-  * for the conversion of the "*.dxc" file format to the binary format "*.xbf" (Created document should be in **BinXCAF** format instead of **MDTV-XCAF**):
+  * To convert <i>*.dxc</i> file format to binary format <i>*.xbf</i> (The created document should be in *BinXCAF* format instead of *MDTV-XCAF*):
 
   @code
   Draw[]> pload ALL
@@ -69,24 +365,26 @@ For that, start *DRAWEXE* and perform the following commands:
   Draw[]> XSave Doc [path to the new file]
   @endcode
 
-On Windows, be careful to replace back slashes in the file path by either direct slash or pairs of back slashes.
-Use "XmlOcaf" or "XmlXCAF" instead of "BinOcaf" and "BinXCAF", respectively, to save in XML format instead of binary one.
+On Windows, it is necessary to replace back slashes in the file path by  direct slashes or pairs of back slashes.
+
+Use *XmlOcaf* or *XmlXCAF* instead of *BinOcaf* and *BinXCAF*, respectively, to save in XML format instead of binary one.
 
 @subsection upgrade_occt700_cdl Removal of CDL and WOK
 
 OCCT code has been completely refactored in version 7.0 to get rid of obsolete technologies used since its inception: CDL (Cas.Cade Definition Language) and WOK (Workshop Organization Kit).
+
 C++ code previously generated by WOK from CDL declarations is now included directly in OCCT sources.
 
 This modification did not change names, API, and behavior of existing OCCT classes, thus in general the code based on OCCT 6.x should compile and work fine with OCCT 7.0.
 However, due to redesign of basic mechanisms (CDL generic classes, Handles and RTTI) using C++ templates, some changes may be necessary in the code when porting to OCCT 7.0, as described below.
 
-WOK is not necessary anymore for building OCCT from sources, though it still can be used in traditional way -- auxiliary files required for that are preserved.
+WOK is not necessary anymore for building OCCT from sources, though it still can be used in a traditional way -- auxiliary files required for that are preserved.
 The recommended method for building OCCT 7.x is CMake, see @ref occt_dev_guides__building_cmake.
-Alternative solution is to use legacy generator of project files (extracted from WOK), see @ref occt_dev_guides__building_wok.
+The alternative solution is to use project files generated by OCCT legacy tool **genproj**, see @ref occt_dev_guides__building_msvc, @ref occt_dev_guides__building_code_blocks, and @ref occt_dev_guides__building_xcode.
 
 @subsubsection upgrade_occt700_cdl_auto Automatic upgrade
 
-Most of typical changes required for upgrading code to use OCCT 7.0 can be done automatically using the *upgrade* tool included in OCCT 7.0.
+Most of typical changes required for upgrading code for OCCT 7.0 can be done automatically using the *upgrade* tool included in OCCT 7.0.
 This tool is a Tcl script, thus Tcl should be available on your workstation to run it.
 
 Example:
@@ -96,49 +394,54 @@ Example:
  % upgrade -recurse -all -src=<path_to_your_sources>
 ~~~~~
 
-On Windows, helper batch script upgrade.bat can be used, provided that Tcl is either available in PATH, or configured via custom.bat script (for instance, if you use OCCT installed from Windows installer package). Start it from command prompt:
+On Windows, the helper batch script *upgrade.bat* can be used, provided that Tcl is either available in *PATH*, or configured via *custom.bat* script (for instance, if you use OCCT installed from Windows installer package). Start it from the command prompt:
 
 ~~~~~
 cmd> <path_to_occt>\upgrade.bat -recurse -all -inc=<path_to_occt>\inc -src=<path_to_your_sources> [options]
 ~~~~~
 
-Run upgrade tool without arguments to see the list of available options.
+Run the upgrade tool without arguments to see the list of available options.
 
-Upgrade tool performs the following changes in the code.
+The upgrade tool performs the following changes in the code.
 
-1. Adds second argument to macro DEFINE_STANDARD_RTTI indicating base class for its argument class (if inheritance is recognized by the script):
+1. Replaces macro *DEFINE_STANDARD_RTTI* by *DEFINE_STANDARD_RTTIEXT*, with second argument indicating base class for the main argument class (if inheritance is recognized by the script):
 ~~~~~
-DEFINE_STANDARD_RTTI(Class) -> DEFINE_STANDARD_RTTI(Class, Base)
+DEFINE_STANDARD_RTTI(Class) -> DEFINE_STANDARD_RTTIEXT(Class, Base)
 ~~~~~
 
-2. Replaces forward declarations of collection classes previously generated from CDL generics (defined in TCollection package) by \#include of corresponding header:
+   @note If macro *DEFINE_STANDARD_RTTI* with two arguments (used in intermediate development versions of OCCT 7.0) is found, the script will convert it to either *DEFINE_STANDARD_RTTIEXT* or *DEFINE_STANDARD_RTTI_INLINE*. 
+   The former case is used if current file is header and source file with the same name is found in the same folder. 
+   In this case, macro *IMPLEMENT_STANDARD_RTTI* is injected in the corresponding source file.
+   The latter variant defines all methods for RTTI as inline, and does not require *IMPLEMENT_STANDARD_RTTIEXT* macro. 
+
+2. Replaces forward declarations of collection classes previously generated from CDL generics (defined in *TCollection* package) by inclusion of the corresponding header:
 ~~~~~
 class TColStd_Array1OfReal; -> #include <TColStd_Array1OfReal.hxx>
 ~~~~~
 
-3. Replaces underscored names of Handle classes by usage of a macro:
+3. Replaces underscored names of *Handle* classes by usage of a macro:
 ~~~~~
 Handle_Class -> Handle(Class)
 ~~~~~
-  This change is not applied if source or header file is recognized as containing definition of Qt class with signals or slots, to avoid possible compilation errors of MOC files caused by inability of MOC to recognize macros (see http://doc.qt.io/qt-4.8/signalsandslots.html).
-  The file is considered as defining Qt object if it contains strings "Q_OBJECT" and either "slots:" or "signals". 
+  This change is not applied if the source or header file is recognized as containing the definition of Qt class with signals or slots, to avoid possible compilation errors of MOC files caused by inability of MOC to recognize macros (see http://doc.qt.io/qt-4.8/signalsandslots.html).
+  The file is considered as defining a Qt object if it contains strings *Q_OBJECT* and either *slots:* or *signals:*. 
 
-4. Removes forward declarations of classes with names Handle(C) or Handle_C, replacing these either by forward declaration of its argument class, or (for files defining Qt objects) \#include statement for header with name of the argument class and extension .hxx:
+4. Removes forward declarations of classes with names <i>Handle(C)</i> or *Handle_C*, replacing them either by forward declaration of its argument class, or (for files defining Qt objects) <i>\#include</i> statement for a header with the name of the argument class and extension .hxx:
 ~~~~~
 class Handle(TColStd_HArray1OfReal); -> #include <TColStd_HArray1OfReal.hxx>
 ~~~~~
 
-5. Removes \#includes of files Handle_...hxx disappeared in OCCT 7.0:
+5. Removes <i> \#includes </i> of files <i>Handle_...hxx</i> that have disappeared in OCCT 7.0:
 ~~~~~
 #include <Handle_Geom_Curve.hxx> ->
 ~~~~~
 
-6. Removes typedef statements that use Handle macro to generate name:
+6. Removes *typedef* statements that use *Handle* macro to generate the name:
 ~~~~~
 typedef NCollection_Handle<Message_Msg> Handle(Message_Msg); ->
 ~~~~~
 
-7. Converts C-style casts applied to Handles to calls to DownCast() method:
+7. Converts C-style casts applied to Handles into calls to <i>DownCast()</i> method:
 ~~~~~
     ((Handle(A)&)b)     -> Handle(A)::DownCast(b)
     (Handle(A)&)b       -> Handle(A)::DownCast(b)
@@ -147,21 +450,23 @@ typedef NCollection_Handle<Message_Msg> Handle(Message_Msg); ->
     (*(Handle(A)*)&b)   -> Handle(A)::DownCast(b)
 ~~~~~
 
-8. Moves Handle() macro out of namespace scope:
+8. Moves <i>Handle()</i> macro out of namespace scope:
 ~~~~~
 Namespace::Handle(Class) -> Handle(Namespace::Class)
 ~~~~~
 
-9. Converts local variables of reference type initialized by temporary object returned by call to DownCast(), to non-references (to avoid using reference to destroyed memory):
+9. Converts local variables of reference type, which are initialized by a temporary object returned by call to <i>DownCast()</i>, to the variables of non-reference type (to avoid using references to destroyed memory):
 ~~~~~
     const Handle(A)& a = Handle(B)::DownCast (b); -> Handle(A) a (Handle(B)::DownCast (b));
 ~~~~~
 
-10. Adds \#include for all classes used as argument to macro STANDARD_TYPE(), except of already included ones;
+10. Adds  <i>\#include</i> for all classes used as argument to macro <i>STANDARD_TYPE()</i>, except for already included ones;
 
-11. Removes uses of obsolete macros IMPLEMENT_DOWNCAST() and IMPLEMENT_STANDARD_*().
+11. Removes uses of obsolete macros *IMPLEMENT_DOWNCAST* and *IMPLEMENT_STANDARD_*..., except *IMPLEMENT_STANDARD_RTTIEXT*.
 
-  > If you plan to keep compatibility of your code with older versions of OCCT, add option "-compat" to avoid the latter change. See also @ref upgrade_occt700_cdl_compat.
+    @note If you plan to keep compatibility of your code with older versions of OCCT, add option <i>-compat</i> to avoid this change. See also @ref upgrade_occt700_cdl_compat.
+
+.
 
 As long as the upgrade routine runs, some information messages are sent to the standard output. 
 In some cases the warnings or errors like the following may appear:
@@ -170,20 +475,20 @@ In some cases the warnings or errors like the following may appear:
   Error in {HEADER_FILE}: Macro DEFINE_STANDARD_RTTI used for class {CLASS_NAME} whose declaration is not found in this file, cannot fix
 ~~~~~
 
-Be sure to check carefully all reported errors and warnings, as corresponding places likely will require manual corrections.
-In some cases these messages may help you to detect errors in your code, for instance, cases where DEFINE_STANDARD_RTTI macro passes invalid class name as an argument.
+Be sure to check carefully all reported errors and warnings, as the corresponding code will likely require manual corrections.
+In some cases these messages may help you to detect errors in your code, for instance, cases where *DEFINE_STANDARD_RTTI* macro is used with incorrect class name as an argument.
 
 @subsubsection upgrade_occt700_cdl_compiler Possible compiler errors
 
-Some situations requiring upgrade cannot be detected and / or handled by automatic procedure.
-If you get compiler errors or warnings when trying to build upgraded code, you will need to fix them manually. 
+Some situations requiring upgrade cannot be detected and / or handled by the automatic procedure.
+If you get compiler errors or warnings when trying to build the upgraded code, you will need to fix them manually. 
 The following paragraphs list known situations of this kind.
 
 #### Missing header files
 
-Use of handle objects (construction, comparison using operators == or !=, use of function STANDRAD_TYPE() and method DownCast()) now requires the type of the object pointed by Handle to be completely known at compile time. Thus it may be necessary to include header of the corresponding class to make the code compilable.
+The use of handle objects (construction, comparison using operators == or !=, use of function <i>STANDRAD_TYPE()</i> and method <i>DownCast()</i>) now requires the type of the object pointed by Handle to be completely known at compile time. Thus it may be necessary to include header of the corresponding class to make the code compilable.
 
-For example, the following lines will fail to compile if Geom_Line.hxx is not included:
+For example, the following lines will fail to compile if *Geom_Line.hxx* is not included:
 
 ~~~~~
 Handle(Geom_Line) aLine = 0;
@@ -198,8 +503,8 @@ This will eliminate the need to include the header *A* in each source file where
 
 #### Ambiguity of calls to overloaded functions
 
-This issue appears in compilers that do not support default arguments in template functions (known cases are Visual C++ 10 and 11): compiler reports ambiguity error if handle is used in argument of call to function that has two or move overloaded versions, accepting handles to different types. 
-The problem is that operator const handle<T2>& is defined for any type T2, thus compiler cannot make a right choice.
+This issue appears in the compilers that do not support default arguments in template functions (known cases are Visual C++ 10 and 11): the compiler reports an ambiguity error if a handle is used in the argument of a call to the function that has two or move overloaded versions, accepting handles to different types. 
+The problem is that operator  <i> const handle<T2>& </i> is defined for any type *T2*, thus the compiler cannot make the right choice.
 
 Example:
 ~~~~~
@@ -210,14 +515,16 @@ Handle(Geom_TrimmedCurve) aCurve = new Geom_TrimmedCurve (...);
 func (aCurve); // ambiguity error in VC++ 10
 ~~~~~
 
-To resolve this ambiguity, change your code so that argument type corresponds exactly to the function signature. 
-In some cases this can be done by using relevant type for the corresponding variable, like in the example above:
+Note that this problem can be avoided in many cases if macro *OCCT_HANDLE_NOCAST* is used, see @ref upgrade_occt700_cdl_nocast "below".
+
+To resolve this ambiguity, change your code so that argument type should correspond exactly to the function signature. 
+In some cases this can be done by using the relevant type for the corresponding variable, like in the example above:
 
 ~~~~~
 Handle(Geom_Curve) aCurve = new Geom_TrimmedCurve (...);  
 ~~~~~
 
-Other variants are assigning the argument to local variable of correct type, using direct cast or constructor:
+Other variants consist in assigning the argument to a local variable of the correct type and using the direct cast or constructor:
 
 ~~~~~
 const Handle(Geom_Curve)& aGCurve (aTrimmedCurve);
@@ -226,12 +533,12 @@ func (static_cast(aCurve)); // OK - direct cast
 func (Handle(Geom_Curve)(aCurve)); // OK - temporary handle is constructed
 ~~~~~
 
-Another possibility is defining additional templated variant of the overloaded function causing ambiguity, and use SFINAE to resolve the ambiguity.
-For example of this technique, see definition of the template variant of the method IGESData_IGESWriter::Send().
+Another possibility consists in defining additional template variant of the overloaded function causing ambiguity, and using *SFINAE* to resolve the ambiguity.
+This technique can be illustrated by the definition of the template variant of method <i>IGESData_IGESWriter::Send()</i>.
 
 #### Lack of implicit cast to base type
 
-Due to the fact that now cast of handle to reference to handle to the base type is user-defined operation, conversions that require this cast combined with other user-defined cast will not be resolved automatically by compiler.
+As the cast of a handle to the reference to another handle to the base type has become a user-defined operation, the conversions that require this cast together with another user-defined cast will not be resolved automatically by the compiler.
 
 For example:
 
@@ -239,25 +546,35 @@ For example:
 Handle(Geom_Geometry) aC = GC_MakeLine (p, v); // compiler error
 ~~~~~
 
-The problem here is that class GCE2d_MakeSegment has user-defined conversion to const Handle(Geom_TrimmedCurve)&, which is not the same as type of the local variable aC.
+The problem is that the class *GCE2d_MakeSegment* has a user-defined conversion to <i>const Handle(Geom_TrimmedCurve)&,</i> which is not the same as the type of the local variable *aC*.
 
-To resolve this, use method Value():
+To resolve this, use method <i>Value()</i>:
 
 ~~~~~
 Handle(Geom_Geometry) aC = GC_MakeLine (p, v).Value(); // ok
 ~~~~~
 
-or use variable of appropriate type:
+or use variable of the appropriate type:
 
 ~~~~~
 Handle(Geom_TrimmedCurve) aC = GC_MakeLine (p, v); // ok
 ~~~~~
 
+With GCC compiler, similar problem appears when const handle to derived type is used to construct handle to base type via assignment (and in some cases in return statement), for instance:
+
+~~~~~
+  const Handle(Geom_Line) aLine;
+  Handle(Geom_Curve) c1 = aLine; // GCC error 
+  Handle(Geom_Curve) c2 (aLine); // ok
+~~~~~
+
+This problem is specific to GCC and it does not appear if macro *OCCT_HANDLE_NOCAST* is used, see @ref upgrade_occt700_cdl_nocast "below".
+
 #### Incorrect use of STANDARD_TYPE and Handle macros
 
 You might need to clean your code from incorrect use of macros *STANDARD_TYPE*() and *Handle*().
 
-1. Explicit definitions of static functions with names generated by macro STANDARD_TYPE(), which are artifacts of old implementation of RTTI, should be removed.
+1. Explicit definitions of static functions with names generated by macro *STANDARD_TYPE()*, which are artifacts of old implementation of RTTI, should be removed.
    
    Example:
 ~~~~~
@@ -268,7 +585,7 @@ const Handle(Standard_Type)& STANDARD_TYPE(math_GlobOptMin)
 }
 ~~~~~
 
-2. Incorrect location of closing parenthesis of Handle() macro that was not detectable in OCCT 6.x will cause compiler error and must be corrected.
+2. Incorrect location of closing parenthesis of *Handle()* macro that was not detectable in OCCT 6.x will cause a compiler error and must be corrected.
 
    Example (note misplaced closing parenthesis):
 ~~~~~
@@ -277,21 +594,21 @@ aBSpline = Handle( Geom2d_BSplineCurve::DownCast(BS->Copy()) );
 
 #### Use of class Standard_AncestorIterator
 
-Class Standard_AncestorIterator has been removed; use method Parent() of Standard_Type class to parse inheritance chain.
+Class *Standard_AncestorIterator* has been removed; use method *Parent()* of *Standard_Type* class to parse the inheritance chain.
 
 #### Absence of cast to Standard_Transient*
 
-Handles in OCCT 7.0 do not have operator of conversion to Standard_Transient*, which was present in earlier versions.
+Handles in OCCT 7.0 do not have the operator of conversion to <i>Standard_Transient*,</i> which was present in earlier versions.
 This is done to prevent possible unintended errors like this:
 
 ~~~~~
 Handle(Geom_Line) aLine = ...;
 Handle(Geom_Surface) aSurf = ...;
 ...
-if (aLine == aSurf) {...} // will cause compiler error in OCCT 7.0, but not OCCT 6.x
+if (aLine == aSurf) {...} // will cause a compiler error in OCCT 7.0, but not OCCT 6.x
 ~~~~~
 
-Places where this implicit cast has been used should be corrected manually.
+The places where this implicit cast has been used should be corrected manually.
 The typical situation is when Handle is passed to stream:
 
 ~~~~~
@@ -299,16 +616,42 @@ Handle(Geom_Line) aLine = ...;
 os << aLine; // in OCCT 6.9.0, resolves to operator << (void*) 
 ~~~~~
 
-Call method get() explicitly to output address of the Handle.
+Call method <i>get()</i> explicitly to output the address of the Handle.
+
+#### Method DownCast for non-base types
+
+Method *DownCast()* in OCCT 7.0 is made templated; if it is used with argument which is not a base class, "deprecated" compiler warning is generated.
+This is done to prevent possible unintended errors like this:
+
+~~~~~
+Handle(Geom_Surface) aSurf = ;
+Handle(Geom_Line) aLine = 
+  Handle(Geom_Line)::DownCast (aSurf); // will cause a compiler warning in OCCT 7.0, but not OCCT 6.x
+~~~~~
+
+The places where this cast has been used should be corrected manually.
+
+If down casting is used in a template context where argument can have the same or unrelated type so that *DownCast()* may be not available in all cases, use C++ *dynamic_cast<>* instead, e.g.: 
+
+~~~~~
+template <class T>
+bool CheckLine (const Handle(T) theArg)
+{
+  Handle(Geom_Line) aLine = dynamic_cast<Geom_Line> (theArg.get());
+  ...
+}
+~~~~~
 
 @subsubsection upgrade_occt700_cdl_runtime Possible runtime problems
 
-Known situations when problems are possible at run time after upgrade to OCCT 7.0 are listed here.
+Here is the list of known possible problems at run time after the upgrade to OCCT 7.0.
 
 #### References to temporary objects
 
-In previous versions, compiler was able to detect situation when local variable of reference type to Handle is initialized by temporary object, and ensured that lifetime of that object is longer than that of the variable. 
-Since OCCT 7.0, it will not work if types of the temporary object and variable are different (due to involvement of user-defined type cast), thus such temporary object will be destroyed immediately.
+In previous versions, the compiler was able to detect the situation when a local variable of a "reference to a Handle" type is initialized by temporary object, and ensured that lifetime of that object is longer than that of the variable. 
+In OCCT 7.0 with default options, it will not work if types of the temporary object and variable are different (due to involvement of user-defined type cast), thus such temporary object will be destroyed immediately.
+
+This problem does not appear if macro *OCCT_HANDLE_NOCAST* is used during compilation, see below.
 
 Example:
 
@@ -319,49 +662,93 @@ Handle(Geom_TrimmedCurve)::DownCast(aCurve);
 aBC->Transform (T); // access violation in OCCT 7.0
 ~~~~~
 
+@subsubsection upgrade_occt700_cdl_nocast Option to avoid cast of handle to reference to base type
+
+In OCCT 6.x and earlier versions the handle classes formed a hierarchy echoing hierarchy of corresponding object classes.
+This automatically enabled possibility to use handle to derived class in all contexts where handle to base class was needed, e.g. pass it in function by reference without copying:
+
+~~~~
+Standard_Boolean GetCurve (Handle(Geom_Curve)& theCurve);
+....
+Handle(Geom_Line) aLine;
+if (GetCurve (aLine)) {
+  // use aLine, unsafe
+}
+~~~~
+
+This feature was used in multiple places in OCCT and dependent projects.
+However it is potentially unsafe: in the above example no checks are done at compile time or at run time to ensure that argument handle is assigned a type compatible with the type of handle passed as argument. 
+If object of incompatible type (e.g. Geom_Circle) is assigned to *theCurve*, the behavior will be unpredictable.
+
+For compatibility with existing code, by default OCCT 7.0 keeps this possibility, providing operators of type cast to handle to base type.
+Besides being unsafe, in specific situations this feature may cause compile-time or run-time errors as described above.
+
+In order to provide safer behavior, this feature can be disabled by defining a compile-time macro *OCCT_HANDLE_NOCAST*.
+When it is defined, constructors and assignment operators are defined (instead of type cast operators) to convert from handle to defived type to handle to base type.
+This implies creation of temporary objects and hence may be more expensive at run time in some circumstances, however this way is more standard, safer, and in general recommended.
+
+The code that relies on possibility of casting to base should be amended so that handle of argument type is always used in function call, and to use DownCast() to safely convert the result to desired type.
+For instance, the code from the example below can be changed as follows:
+
+~~~~~
+Handle(Geom_Line) aLine;
+Handle(Geom_Curve) aCurve;
+if (GetCurve (aCure) && !(aLine = Handle(Geom_Line)::DownCast (aCurve)).IsNull()) {
+  // use aLine safely
+}
+~~~~~
+
 @subsubsection upgrade_occt700_cdl_compat Preserving compatibility with OCCT 6.x
 
-If you like to preserve compatibility of your application code with OCCT versions 6.x even after upgrade to 7.0, consider the following suggestions:
+If you like to preserve the compatibility of your application code with OCCT versions 6.x even after the upgrade to 7.0, consider the following suggestions:
 
-1. When running automatic upgrade tool, add option *-compat*.
+1. If your code used sequences of macros *IMPLEMENT_STANDARD_*... generated by WOK, replace them by single macro *IMPLEMENT_STANDARD_RTTIEXT*
 
-2. In order to overcome incompatibility of macro DEFINE_STANDARD_RTTI which has additional argument in OCCT 7.0, you can replace (after upgrade) its use in your code by your own version-dependent macro, which resolves to either 6.x or 7.x version.
+2. When running automatic upgrade tool, add option <i>-compat</i>.
+
+3. Define macros *DEFINE_STANDARD_RTTIEXT* and *DEFINE_STANDARD_RTTI_INLINE* when building with previous versions of OCCT, resolving to *DEFINE_STANDARD_RTTI* with single argument 
 
    Example:
 ~~~~~   
 #if OCC_VERSION_HEX < 0x070000
-  #define DEFINE_STANDARD_RTTI_COMPAT(C1,C2) DEFINE_STANDARD_RTTI(C1) 
-#else
-  #define DEFINE_STANDARD_RTTI_COMPAT(C1,C2) DEFINE_STANDARD_RTTI(C1,C2) 
+  #define DEFINE_STANDARD_RTTIEXT(C1,C2) DEFINE_STANDARD_RTTI(C1)
+  #define DEFINE_STANDARD_RTTI_INLINE(C1,C2) DEFINE_STANDARD_RTTI(C1)
 #endif
 ~~~~~
 
 @subsubsection upgrade_occt700_cdl_wok Applications based on CDL and WOK
 
-If you have application essentially based on CDL, and need to upgrade it to OCCT 7.0, you will very likely need to convert your application code to non-CDL form.
-This is non-trivial effort; the required actions would depend strongly on the structure of the code and used features of CDL.
+If your application is essentially based on CDL, and you need to upgrade it to OCCT 7.0, you will very likely need to convert your application code to non-CDL form.
+This is a non-trivial effort; the required actions would depend strongly on the structure of the code and used CDL features.
 
-The upgrade script and sources of specialized version of WOK used for upgrading OCCT code can be found in WOK Git repository in branch [CR0_700_2](http://git.dev.opencascade.org/gitweb/?p=occt-wok.git;a=log;h=refs/heads/CR0_700_2).
+The upgrade script and sources of a specialized WOK version used for OCCT code upgrade can be found in WOK Git repository in branch [CR0_700_2](http://git.dev.opencascade.org/gitweb/?p=occt-wok.git;a=log;h=refs/heads/CR0_700_2).
 
 [Contact us](http://www.opencascade.com/contact/) if you need more help.
 
 @subsection upgrade_occt700_bspline Separation of BSpline cache
 
-Implementation of NURBS curves and surfaces has been revised: cache of polynomial coefficients, used to accelerate calculate values of B-spline, is separated from data objects (Geom2d_BSplineCurve, Geom_BSplineCurve, Geom_BSplineSurface), into dedicated classes (BSplCLib_Cache and BSplSLib_Cache). 
+Implementation of NURBS curves and surfaces has been revised: the cache of polynomial coefficients, which is used to accelerate calculate values of B-spline, has been separated from data objects *Geom2d_BSplineCurve, Geom_BSplineCurve* and *Geom_BSplineSurface* into the dedicated classes *BSplCLib_Cache* and *BSplSLib_Cache*. 
 
 The benefits of this change are:
-
 * Reduced memory footprint of OCCT shapes (up to 20% on some cases)
 * Possibility to evaluate the same B-Spline concurrently in parallel threads without data races and mutex locks 
 
-The drawback is that direct evaluation of B-Splines using methods of curves and surfaces becomes slower, due to absence of cache. The way to avoid slow down is to use adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface): they now use cache when the curve or surface is a B-spline.
+The drawback is that direct evaluation of B-Splines using methods of curves and surfaces becomes slower due to the absence of cache. The slow-down can be avoided by using adaptor classes *Geom2dAdaptor_Curve, GeomAdaptor_Curve* and *GeomAdaptor_Surface*, which now use cache when the curve or surface is a B-spline.
 
-OCCT algorithms are changed to use adaptors for B-spline calculations instead of direct methods of curves and surfaces.
-The same changes (use of adaptors instead of direct call to curve and surface methods) should be implemented in relevant places in applications based on OCCT in order to get maximum performance.
+OCCT algorithms have been changed to use adaptors for B-spline calculations instead of direct methods for  curves and surfaces.
+The same changes (use of adaptors instead of direct call to curve and surface methods) should be implemented in relevant places in the applications based on OCCT to get the maximum performance.
+
+@subsection upgrade_occt700_booleanresult Structural result of Boolean operations
+
+The result of Boolean operations became structured according to the structure of the input shapes. Therefore it may impact old applications that always iterate on direct children of the result compound assuming to obtain solids as iteration items, regardless of the structure of the input shapes. In order to get always solids as iteration items it is recommended to use TopExp_Explorer instead of TopoDS_Iterator.
+
+@subsection upgrade_occt700_brepextrema BRepExtrema_ExtCC finds one solution only
+
+Extrema computation between non-analytical curves in shape-shape distance calculation algorithm has been changed in order to return only one solution. So, if e.g. two edges are created on parallel b-spline curves the algorithm BRepExtrema_DistShapeShape will return only one solution instead of enormous number of solutions. There is no way to get algorithm working in old manner.
 
 @subsection upgrade_occt700_sorttools Removal of SortTools package
 
-Package SortTools has been removed. 
+Package *SortTools* has been removed. 
 The code that used the tools provided by that package should be corrected manually.
 The recommended approach is to use sorting algorithms provided by STL.
 
@@ -382,22 +769,22 @@ can be replaced by:
 ...
 TCollection_Array1OfReal aValues = ...;
 ...
-std::stable_sort (aValues->begin(), aValues->end());
+std::stable_sort (aValues.begin(), aValues.end());
 ~~~~~
 
 @subsection upgrade_occt700_2dlayers On-screen objects and ColorScale
 
-Old mechanism for rendering Underlay and Overlay on-screen 2D objects based on Visual3d_Layer and immediate drawing model (e.g. uncached and thus slow) have been removed.
-Classes Aspect_Clayer2d, OpenGl_GraphicDriver_Layer, Visual3d_Layer, Visual3d_LayerItem, V3d_LayerMgr, V3d_LayerMgrPointer have been deleted.
+The old mechanism for rendering Underlay and Overlay on-screen 2D objects based on *Visual3d_Layer* and immediate drawing model (uncached and thus slow) has been removed.
+Classes *Aspect_Clayer2d, OpenGl_GraphicDriver_Layer, Visual3d_Layer, Visual3d_LayerItem, V3d_LayerMgr* and *V3d_LayerMgrPointer* have been deleted.
 
-General AIS interactive objects with transformation persistence flag Graphic3d_TMF_2d can be used as replacement of Visual3d_LayerItem.
-Anchor point specified for transformation persistence defines a corner of window (or center in case of (0, 0) point).
-To keep on-screen 2D objects on the top of main screen, them could be assigned to appropriate Z-layer.
-Predefined Z-layers Graphic3d_ZLayerId_TopOSD and Graphic3d_ZLayerId_BotOSD are intended to replace Underlay and Overlay layers within old API.
+General AIS interactive objects with transformation persistence flag *Graphic3d_TMF_2d* can be used as a replacement of *Visual3d_LayerItem*.
+The anchor point specified for transformation persistence defines the window corner of  (or center in case of (0, 0) point).
+To keep on-screen 2D objects on top of the main screen, they can be assigned to the appropriate Z-layer.
+Predefined Z-layers *Graphic3d_ZLayerId_TopOSD* and *Graphic3d_ZLayerId_BotOSD* are intended to replace Underlay and Overlay layers within the old API.
 
-ColorScale object previously implemented using Visual3d_LayerItem has been moved to a new class AIS_ColorScale, with width and height specified explicitly.
-The property of V3d_View storing global ColorScale object has been removed with associated methods V3d_View::ColorScaleDisplay(), V3d_View::ColorScaleErase(), V3d_View::ColorScaleIsDisplayed(), V3d_View::ColorScale() and classes V3d_ColorScale, V3d_ColorScaleLayerItem, Aspect_ColorScale.
-Here is an example of creating ColorScale using updated API:
+*ColorScale* object previously implemented using *Visual3d_LayerItem* has been moved to a new class *AIS_ColorScale*, with width and height specified explicitly.
+The property of *V3d_View* storing the global *ColorScale* object has been removed with associated methods *V3d_View::ColorScaleDisplay(), V3d_View::ColorScaleErase(), V3d_View::ColorScaleIsDisplayed()* and *V3d_View::ColorScale()* as well as the classes *V3d_ColorScale, V3d_ColorScaleLayerItem* and *Aspect_ColorScale*.
+Here is an example of creating *ColorScale* using the updated API:
 
 ~~~~~
 Handle(AIS_ColorScale) aCS = new AIS_ColorScale();
@@ -414,14 +801,14 @@ aCS->SetToUpdate();
 theContextAIS->Display (aCS);
 ~~~~~
 
-To see how 2d objects are realized in OCCT you can call draw commands vcolorscale, vlayerline or vdrawtext (with -2d option).
-Draw command vcolorscale now requires a name of ColorScale object as an argument.
-To display this object use command vdisplay. Example:
+To see how 2d objects are implemented in OCCT you can call Draw commands *vcolorscale, vlayerline* or *vdrawtext* (with <i>-2d</i> option).
+Draw command *vcolorscale* now requires the name of *ColorScale* object as argument.
+To display this object use command *vdisplay*. For example:
 
 ~~~~~
 pload VISUALIZATION
 vinit
-vcolorscale cs –demo
+vcolorscale cs -demo
 pload MODELING
 box b 100 100 100
 vdisplay b
@@ -431,7 +818,7 @@ vlayerline 0 300 300 300 10
 vdrawtext t "2D-TEXT" -2d -pos 0 150 0 -color red
 ~~~~~
 
-Here is a small example in c++ how to display a custom AIS object in 2d:
+Here is a small example in C++ illustrating how to display a custom AIS object in 2d:
 ~~~~~
 Handle(AIS_InteractiveContext) aContext = ...;
 Handle(AIS_InteractiveObject) anObj =...; // create an AIS object
@@ -444,39 +831,37 @@ aContext->Display (anObj); // display the object
 
 #### Visual3d package
 
-Package Visual3d implementing intermediate layer between high-level V3d classes
+Package *Visual3d* implementing the intermediate layer between high-level *V3d* classes
 and low-level OpenGl classes for views and graphic structures management has been dropped.
 
-The OpenGl_View inherits from the new class Graphic3d_CView.
-Graphic3d_CView is an interface class that declares abstract methods for managing displayed structures,
+The *OpenGl_View* inherits from the new class *Graphic3d_CView*.
+*Graphic3d_CView* is an interface class that declares abstract methods for managing displayed structures,
 display properties and a base layer code that implements computation
 and management of HLR (or more broadly speaking view-depended) structures.
 
-In new implementation it takes place of eliminated Visual3d_View.
-As before the instance of Graphic3d_CView is still completely managed by V3d_View classes.
-It can be accessed through V3d_View interface but normally this should not be required as all its methods are completely wrapped.
+In the new implementation it takes place of the eliminated *Visual3d_View*.
+As before the instance of *Graphic3d_CView* is still completely managed by *V3d_View* classes.
+It can be accessed through *V3d_View* interface but normally it should not be required as all its methods are completely wrapped.
 
-In more details, a concrete specialization of Graphic3d_CView is created and returned by graphical driver on request.
-Right after creation the views is directly used for setting rendering properties and adding graphical structures to be displayed.
+In more details, a concrete specialization of *Graphic3d_CView* is created and returned by the graphical driver on request.
+Right after the creation the views are directly used for setting rendering properties and adding graphical structures to be displayed.
 
 The rendering of graphics is possible after mapping a window and activating the view.
-The direct setting of properties makes obsolete usage of intermediate structures with display parameter
-like Visual3d_ContextView and etc (the whole package of Visual3d become redundant).
+The direct setting of properties obsoletes the use of intermediate structures with display parameter
+like *Visual3d_ContextView*, etc. This means that the whole package *Visual3d* becomes redundant.
 
-New location of functionality previously provided by Visual3d package:
-- Logic of managing display of structures was put from Visual3d_ViewManager into Graphic3d_StructureManager.
-- Removed Visual3d_View class. Logic of managing computed structures was put into base layer of Graphi3d_CView.
-- Removed all intermediate structures for storing view parameters e.g. Visual3d_ContextView.
-  All settings are kept by instances of Graphic3d_CView
-- Removed Visual3d_Light intermediate class.
-  All light properties are still stored in Graphic3d_CLight structure.
-  The structure is directly access by instance of V3d_Light classes.
-- Moved all needed enumerations into Graphic3d package.
+The functionality previously provided by *Visual3d* package has been redesigned in the following way :
+- The management of display of structures has been moved from *Visual3d_ViewManager* into *Graphic3d_StructureManager*.
+- The class *Visual3d_View* has been removed. The management of computed structures has been moved into the base layer of *Graphi3d_CView*.
+- All intermediate structures for storing view parameters, e.g. *Visual3d_ContextView*, have been removed.
+  The settings are now kept by instances of *Graphic3d_CView*.
+- The intermediate class *Visual3d_Light* has been removed. All light properties are stored in *Graphic3d_CLight* structure, which is directly accessed by instances of *V3d_Light* classes.
+- All necessary enumerations have been moved into *Graphic3d* package.
 
 #### Custom OpenGL rendering and UserDraw
 
-Old APIs based on global callback functions for creating UserDraw objects and for performing custom OpenGL rendering within the view have been dropped.
-UserDraw callbacks no more required since OpenGl_Group now inherits Graphic3d_Group and thus can be accessed directly from AIS_InteractiveObject:
+Old APIs based on global callback functions for creating *UserDraw* objects and for performing custom OpenGL rendering within the view have been dropped.
+*UserDraw* callbacks are no more required since *OpenGl_Group* now inherits *Graphic3d_Group* and thus can be accessed directly from *AIS_InteractiveObject*:
 
 ~~~~~
 //! Class implementing custom OpenGL element.
@@ -502,7 +887,7 @@ void UserDrawObject::Compute (const Handle(PrsMgr_PresentationManager3d)& thePrs
 }
 ~~~~~
 
-For performing custom OpenGL code within view, user should inherit from class OpenGl_View.
+To perform a custom OpenGL code within the view, it is necessary to inherit from class *OpenGl_View*.
 See the following code sample:
 
 ~~~~~
@@ -556,7 +941,33 @@ public:
 
 @subsection upgrade_occt700_localcontext Deprecation of Local Context
 
-Conception of Local Context has been deprecated.
-Related classes (AIS_LocalContext) and methods (AIS_InteractiveContext::OpenLocalContext() and others) will be removed within some future OCCT release.
+The conception of Local Context has been deprecated.
+The related classes, e.g. *AIS_LocalContext*, and methods ( <i>AIS_InteractiveContext::OpenLocalContext()</i> and others) will be removed in a future OCCT release.
 
 The main functionality provided by Local Context - selection of object subparts - can be now used within Neutral Point without opening any Local Context.
+
+@subsection upgrade_occt700_separate_caf_visualisation Separation of visualization part from TKCAF
+
+Visualization CAF attributes have been moved into a new toolkit *TKVCAF*. 
+If your application uses the classes from *TPrsStd* package then add link to *TKVCAF* library.
+
+Version numbers of *BinOCAF* and *XmlOCAF* formats are incremented; new files cannot be read by earlier versions of OCCT.
+
+Before loading the OCAF files saved by previous versions and containing *TPrsStd_AISPresentation* attribute it is necessary to define the environment variable *CSF_MIGRATION_TYPES*, pointing to file *src/StdResources/MigrationSheet.txt*.
+When using documents loaded from a file, make sure to call method *TPrsStd_AISViewer::New()* prior to accessing *TPrsStd_AISPresentation* attributes in this document as that method creates them.
+
+@subsection upgrade_euler_angles Correction of interpretation of Euler angles in gp_Quaternion
+
+Conversion of *gp_Quaternion* to and from intrinsic Tait-Bryan angles (including *gp_YawPitchRoll*) is fixed.
+
+Before that fix the sequence of rotation axes was opposite to the intended; e.g. *gp_YawPitchRoll* (equivalent to *gp_Intrinsic_ZYX*) actually  defined intrinsic rotations around X, then Y, then Z. Now the rotations are made in correct order.
+
+Applications that use *gp_Quaternion* to convert Yaw-Pitch-Roll angles (or other intrinsic Tait-Bryan sequences) may need to be updated to take this change into account.
+
+@subsection upgrade_zoom_persistent_selection Zoom Persistent Selection
+
+Zoom persistent selection introduces a new structure *Graphic3d_TransformPers* for transform persistence methods and parameters and a new class *Graphic3d_WorldViewProjState* for referring camera transformation state. You might need to update your code to deal with the new classes if you were using the related features. Please, keep in mind the following: 
+* *Graphic3d_Camera::ModelViewState* has been renamed to *Graphic3d_Camera::WorldViewState*.
+* Transformation matrix utilities from *OpenGl_Utils* namespace have been moved to *Graphic3d_TransformUtils* and *Graphic3d_TransformUtils.hxx* header respectively.
+* Matrix stack utilities from *OpenGl_Utils* namespace have been moved to *OpenGl_MatrixStack* class and *OpenGl_MatrixStack.hxx* header respectively.
+* *OpenGl_View* methods *Begin/EndTransformPersistence* have been removed. Please, use *Graphic3d_TransformPers::Apply()* instead to apply persistence to perspective and world-view projection matrices.

dox/overview/overview.md

@@ -19,7 +19,7 @@ modeling (CAD), manufacturing / measuring (CAM) or numerical simulation (CAE).
 @section OCCT_OVW_SECTION_2 Copyrights
 
 Open CASCADE Technology and all materials, including this documentation, is 
-Copyright (c) 1999-2015 by OPEN CASCADE S.A.S. All rights reserved.
+Copyright (c) 1999-2016 by OPEN CASCADE S.A.S. All rights reserved.
 
 @htmlonly<center>@endhtmlonly
 http://www.opencascade.com
@@ -59,8 +59,8 @@ OPEN CASCADE S.A.S.
 
 **Mac** and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.
 
- Acknowledgements
-------------------
+ Acknowledgments
+-----------------
 
 The following parties are acknowledged for producing tools which are used within 
 Open CASCADE Technology libraries or for release preparation.
@@ -73,7 +73,7 @@ and, in case you need any further information, directly contact their authors.
 **Qt** is a cross-platform application framework that is widely used for developing application software 
 with graphical user interface (GUI). Qt is free and open source software distributed under 
 the terms of the GNU Lesser General Public License. In OCCT Qt is used for programming samples. 
-If you need further information on Qt, please, refer to Qt Homepage (http://qt.digia.com).
+If you need further information on Qt, please, refer to Qt Homepage (http://www.qt.io/)
 
 **Tcl** is a high-level programming language. Tk is a graphical user interface (GUI) toolkit, 
 with buttons, menus, listboxes, scrollbars, and so on. Taken together Tcl and Tk provide a solution 
@@ -107,15 +107,12 @@ Threading Building Blocks is not just a threads-replacement library. It represen
 abstracts platform details and threading mechanisms for scalability and performance. 
 TBB is available under GPLv2 license with the runtime exception.
 
-Open CASCADE Technology WOK module on Windows also makes use of LGPL-licensed C routines **regexp** 
-and **getopt**, taken from GNU C library.
-
 **OpenGL** is an industry standard API for 3D graphics used by OCCT for 
 implementation of 3D viewer. OpenGL specification is developed by the
 Khronos group, http://www.khronos.org/opengl/. OCCT code includes header 
 file *glext.h* obtained from Khronos web site.
 
-**VTK** - The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, please, refer to VTK Homepage http://www.vtk.org/.
+**VTK** -- The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, please, refer to VTK Homepage http://www.vtk.org/.
 
 **Doxygen** developed by Dimitri van Heesch is open source documentation system for 
 C++, C, Java, Objective-C, Python, IDL, PHP and C#. This product is used in Open CASCADE Technology 
@@ -158,7 +155,7 @@ OCCT documentation is provided in several forms:
   which is a freeware and can be downloaded from the Adobe site. 
 
 - Full reference documentation covering all OCCT classes generated automatically by Doxygen 
-  software is provided in HTML format, in a separate package. 
+  software is provided in HTML format. 
   Reference documentation is presented in **Modules --> Toolkits --> Packages --> Classes** 
   logic structure with cross-references to all OCCT classes and complete in-browser search by all classes.
 
@@ -191,90 +188,66 @@ Linux (x86-64), MAC OS X (x86-64) and Android (4.0.4 armv7) platforms.
 The tables below describe the recommended hardware and software configurations
 for which OCCT is certified to work.
 
-@subsection OCCT_OVW_SECTION_5_1 Linux
+@subsection overview_req_os Operating System
 
-| Operating System  | Mandriva 2010, CentOS 5.5, CentOS 6.3, Fedora 17, Fedora 18, Ubuntu 13.04, Debian 6.0\*  |
-| ----- | ----- |
-| Minimum memory    | 512 MB, 1 GB recommended |
-| Free disk space (complete installation) | 600 MB approx. |
-| Video card   | See \ref overview_req_graphics |
-| Graphic library | OpenGL 3.3+, OpenGL ES 2.0+ |
-| C++      | GNU gcc 4.0.  - 4.7.3. |
-| TCL (for testing tools)    | Tcl/Tk 8.5 or 8.6 http://www.tcl.tk/software/tcltk/download.html |
-| Qt (for demonstration tools) | Qt 4.8.6 http://qt-project.org/downloads |
-| Freetype (for text rendering) | freetype-2.5.3 http://sourceforge.net/projects/freetype/files/ |
-| FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.16.0 http://sourceforge.net/projects/freeimage/files |
-| gl2ps (optional, for export contents of OCCT viewer to vector graphic files) | gl2ps-1.3.8  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 3.x or 4.x http://www.threadingbuildingblocks.org/ |
-| VTK (for VTK Integration Services | VTK 6.1.0 http://www.vtk.org/VTK/resources/software.html |
+| OS        | Versions |
+| --------- | ----------- |
+| Windows   | 10, 8.1, 7 SP1, Vista SP2 |
+| Linux     | Mandriva 2010, CentOS 6.3, Fedora 18, Ubuntu 14.10 - 15.10, Debian 6.0, Debian 7.0 |
+| OS X      | 10.10 Yosemite / 10.9 Mavericks / 10.8 Mountain Lion / 10.7 Lion |
+| Android   | 6.x, 5.x, 4.0.4+ |
+| iOS       | iOS 7 |
 
-* Debian 6.0 64 bit is a platform used for regular testing of contributions
+@subsection overview_req_cpp C++ Compiler / IDE
 
-@subsection OCCT_OVW_SECTION_5_2 Windows
+| OS        | Compiler |
+| --------- | ----------- |
+| Windows   | Microsoft Visual Studio: 2010 SP1<sup>1</sup>, 2012 Update 4, 2013 Update 5, 2015 <br> Intel C++ Composer XE 2013 SP1 <br> GCC 4.3+ (Mingw-w64)|
+| Linux     | GNU gcc 4.3+ <br> LLVM CLang 3.6+ |
+| OS X      | XCode 6 or newer |
+| Android   | NDK r10, GNU gcc 4.8 or newer |
 
-| Operating System | Windows 8.1 / 7 SP1 / Vista SP2 / XP SP3 |
-| ----- | ----- |
-| Minimum memory    | 512 MB, 1 GB recommended |
-| Free disk space (complete installation) | 600 MB approx. |
-| Video card   | See \ref overview_req_graphics |
-| Graphic library | OpenGL 3.3+, OpenGL ES 2.0+ |
-| C++ | Microsoft Visual Studio: 2005 SP1, 2008 SP1, 2010 SP1 \*, 2012 Update 3, 2013 <br>Intel C++ Composer XE 2013 SP1 |
-| TCL (for testing tools) | Tcl/Tk 8.5 or 8.6 http://www.tcl.tk/software/tcltk/download.html  |
-| Qt (for demonstration tools) | Qt 4.8.6 http://qt-project.org/downloads |
-| Freetype (OCCT Text rendering) | freetype-2.5.3 http://sourceforge.net/projects/freetype/files/ |
-| FreeImage (Support of common graphic formats) | FreeImage 3.16.0 http://sourceforge.net/projects/freeimage/files |
-| gl2ps (Export contents of OCCT viewer to vector graphic file) | gl2ps-1.3.8  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 3.x or 4.x http://www.threadingbuildingblocks.org/ |
-| VTK (for VTK Integration Services | VTK 6.1.0 http://www.vtk.org/VTK/resources/software.html |
-
-* VC++ 10 64-bit is used for certification of contributions and for building 
+1) VC++ 10 64-bit is used for regular testing and for building 
   binary package of official release of OCCT on Windows.
 
-@subsection OCCT_OVW_SECTION_5_3 MAC OS X
+@subsection overview_req_libs Third-party libraries
 
-| Operating System | OS X 10.10 Yosemite / 10.9 Mavericks / 10.8 Mountain Lion / 10.7 Lion / 10.6.8 Snow Leopard |
-| ----- | ----- |
+| Component | Requirement |
+| --------- | ----------- |
+| Graphic library | OpenGL 3.3+, OpenGL ES 2.0+ <br> Direct3D 9 |
+| Qt (for samples and demos) | Desktop: Qt 4.8.6+ http://www.qt.io/download/ <br> Android: Qt 5.3.2+ http://www.qt.io/download/ |
+| TCL (for testing tools)    | Tcl/Tk 8.6.3+ http://www.tcl.tk/software/tcltk/download.html <br> or ActiveTcl 8.6 http://www.activestate.com/activetcl/downloads (for Windows)| 
+| Freetype (for text rendering) | FreeType 2.4.11-2.5.5 http://sourceforge.net/projects/freetype/files/ |
+| FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ http://sourceforge.net/projects/freeimage/files |
+| gl2ps (optional, for export contents of OCCT viewer to vector formats) | gl2ps-1.3.8+  http://geuz.org/gl2ps/ |
+| Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x http://www.threadingbuildingblocks.org/ |
+| VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/VTK/resources/software.html |
+| Doxygen (optional for building documentation) | Doxygen 1.8.5+ http://www.stack.nl/~dimitri/doxygen/download.html |
+
+@subsection overview_req_hw Hardware
+
+| Component | Requirement |
+| --------- | ----------- |
 | Minimum memory    | 512 MB, 1 GB recommended |
 | Free disk space (complete installation) | 600 MB approx. |
-| C++      | XCode 3.2 or newer (4.x is recommended) |
-| TCL (for testing tools)    | Tcl/Tk 8.5 or 8.6 http://www.tcl.tk/software/tcltk/download.html |
-| Qt (for demonstration tools) | Qt 4.8.6 http://qt-project.org/downloads |
-| Freetype (OCCT Text rendering) | freetype-2.5.3 http://sourceforge.net/projects/freetype/files/ |
-| FreeImage (Support of common graphic formats) | FreeImage 3.16.0 http://sourceforge.net/projects/freeimage/files |
-| gl2ps (Export contents of OCCT viewer to vector graphic file) | gl2ps-1.3.8  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 3.x or 4.x http://www.threadingbuildingblocks.org/ |
 
-@subsection OCCT_OVW_SECTION_5_4 Android
-
-| Operating System  | Android 4.0.4+  |
-| ----- | ----- |
-| Minimum memory | 512 MB, 1 GB recommended |
-| C++      | NDK r10, GNU gcc 4.8 or newer |
-| Qt (for demonstration tools) | Qt 5.3.2 http://qt-project.org/downloads |
-| Freetype (for text rendering) | freetype-2.5.3 http://sourceforge.net/projects/freetype/files/ |
-
-@subsection overview_req_graphics Graphic cards
-
-On desktop, 3D viewer requires graphic card or software implementation supporting OpenGL 1.1 or above. OpenGL 2.1+ is highly recommended.
-Ray tracing requires OpenGL 4.0+ or OpenGL 3.1+ with GL_ARB_texture_buffer_object_rgb32 extension. Textures within ray tracing will be available only when GL_ARB_bindless_texture extension is provided by driver.
+On desktop, 3D viewer for optimal performance requires graphics processing unit (GPU) supporting OpenGL 3.3 or above. 
+Ray tracing requires OpenGL 4.0+ or OpenGL 3.3+ with *GL_ARB_texture_buffer_object_rgb32* extension.
+Textures within ray tracing will be available only when *GL_ARB_bindless_texture extension* is provided by driver.
 
 On mobile platforms, OpenGL ES 2.0+ is required for 3D viewer. The ray tracing is not yet available on mobile platforms.
 Some old hardware might be unable to execute complex GLSL programs (e.g. with high number of light sources, clipping planes).
 
 The following table lists graphic cards tested to work with OCCT.
 
-| Graphic card                     | Driver                           | OS                         | OpenGL (fixed pipeline) | OpenGL (shaders) | OpenGL (ray tracing) |
+| Graphic card  | Driver | OS | OpenGL (fixed pipeline) | OpenGL (shaders) | OpenGL (ray tracing) |
 | ---- | ---- | ---- | :----: | :----: | :----: |
 | NVIDIA GeForce GTX 650     | Driver 340.52, OpenGL 4.4        | Windows 7 64 bit           | OK | OK  | OK |
 | AMD/ATI RadeOn HD 7870     | Driver 14.100, OpenGL 4.4        | Windows 7 64-bit           | OK | OK  | OK |
 | Intel(R) HD Graphics 2500  | Driver 10.18.10.3621, OpenGL 4.0 | Windows 7 64 bit           | OK | OK  | limited (no textures) |
-| RadeOn 9600                | OpenGL 2.1.8454                  | Windows XP 32-bit          | OK | bad | unsupported by hardware |
-| NVIDIA GeForce 6600 GT     | OpenGL 2.1                       | Windows XP 32-bit          | OK | OK  | unsupported by hardware |
 | NVIDIA GeForce 320         | N/A                              | Mac OS X 10.6 / OS X 10.10 | OK | OK  | not yet supported by OCCT |
 | Apple software OpenGL      | N/A                              | Mac OS X 10.6 / OS X 10.10 | OK | OK  | N/A |
-| Mesa 10.2.4 \*             | "Gallium 0.4 on llvmpipe (LLVM 3.4, 256 bits)" OpenGL 3.0 | Windows 7 64 bit   | OK | OK  | unsupported by software |
-
-* Mesa implementation of OpenGL is used for certification testing of OCCT
+| Mesa 10.2.4 (software emulator) | "Gallium 0.4 on llvmpipe (LLVM 3.4, 256 bits)" OpenGL 3.0 | Windows 7 64 bit   | OK | OK  | unsupported by software |
 
 @section OCCT_OVW_SECTION_4 Installation
 
@@ -312,7 +285,7 @@ When the installation is complete, you will find the directories for 3rd party p
 @image html /overview/images/overview_3rdparty.png 
 @image latex /overview/images/overview_3rdparty.png 
 
-The contents of the OCCT-6.9.0 directory (called further "OCCT root", or $CASROOT) are as follows:
+The contents of the OCCT-7.0.0 directory (called further "OCCT root", or $CASROOT) are as follows:
 
 @image html /overview/images/overview_installation.png "The directory tree"
 @image latex /overview/images/overview_installation.png "The directory tree"
@@ -323,8 +296,7 @@ The contents of the OCCT-6.9.0 directory (called further "OCCT root", or $CASROO
   * **data**  This folder contains CAD files in different formats, which can be used to test the OCCT functionality;
   * **doc**  This folder contains OCCT documentation in HTML and PDF format;
   * **dox**  This folder contains sources of OCCT documentation in plain text (MarkDown) format;
-  * **drv**  This folder contains source files generated by WOK (private header files and instantiations of generic classes);
-  * **inc**  This folder contains all OCCT header files;
+  * **inc**  This folder contains copies of all OCCT header files;
   * **samples**  This folder contains sample applications.
   * **src**  This folder contains OCCT source files. They are organized in folders, one per development unit;
   * **tests**  This folder contains scripts for OCCT testing.
@@ -338,7 +310,7 @@ To run any Open CASCADE Technology application you need to set the environment v
 
 You can define the environment variables with env.bat script located in the 
 $CASROOT folder. This script accepts two arguments to be used: 
-the version of Visual Studio (vc8 - vc12) and the architecture (win32 or win64).
+the version of Visual Studio (vc8 -- vc12) and the architecture (win32 or win64).
 
 The additional environment settings necessary for compiling OCCT libraries and samples 
 by Microsoft Visual Studio can be set using script custom.bat located in the same folder. 
@@ -365,7 +337,7 @@ The scripts are located in the OCCT root folder.
   * **MMGT_OPT** (optional) if set to 1, the memory manager performs optimizations as described below; if set to 2, 
     Intel (R) TBB optimized memory manager is used; if 0 (default), every memory block is allocated 
     in C memory heap directly (via malloc() and free() functions). 
-    In the latter case, all other options except MMGT_CLEAR are ignored;
+    In the latter case, all other options starting with *MMGT*, except MMGT_CLEAR, are ignored;
   * **MMGT_CLEAR** (optional) if set to 1 (default), every allocated memory block is cleared by zeros; 
     if set to 0, memory block is returned as it is;
   * **MMGT_CELLSIZE** (optional) defines the maximal size of blocks allocated in large pools of memory. Default is 200;
@@ -376,21 +348,18 @@ The scripts are located in the OCCT root folder.
   * **MMGT_MMAP** (optional) when set to 1 (default), large memory blocks are allocated using 
     memory mapping functions of the operating system; if set to 0, 
     they will be allocated in the C heap by malloc();
-  * **CSF_LANGUAGE** is required to define the default language of messages;
+  * **CSF_LANGUAGE** (optional) defines default language of messages;
   * **CSF_DEBUG** (optional, Windows only): if defined then a diagnostic message is displayed in case of an exception;
   * **CSF_DEBUG_BOP** (optional): if defined then it should specify directory where diagnostic data on problems occured in Boolean operations will be saved;
   * **CSF_MDTVTexturesDirectory** defines the directory for available textures when using texture mapping;
-  * **CSF_ShadersDirectory** defines the directory for GLSL programs (required for advanced rendering techniques and custom shaders);
-  * **CSF_UnitsDefinition** and **CSF_UnitsLexicon** should define paths to resource files Lexi_Expr.dat and Units.dat, respectively, required for support of measurement units;
-  * **CSF_SHMessage** is required in order to define the path to the messages file for *ShapeHealing*;
-  * **CSF_XSMessage** is required in order to define the path to the messages file for **STEP** and **IGES** translators;
-  * **CSF_StandardDefaults** and **CSF_PluginDefaults** are required in order to maintain CASCADE Persistence mechanism to make possible any open/save operations with OCAF documents;
-  * **CSF_StandardLiteDefaults** is required in order to maintain *OCCT Persistence mechanism* to make possible any open/save operations with Lite OCAF documents;
-  * **CSF_XCAFDefaults**  any open/save operations for **XDE** documents;
-  * **CSF_IGESDefaults** and **CSF_STEPDefaults** are required for **IGES** and **STEP** translators correspondingly in order to define the path to the resource files;
+  * **CSF_ShadersDirectory** defines the directory for GLSL programs (required for 3D viewer to work);
+  * **CSF_UnitsDefinition** and **CSF_UnitsLexicon** should define paths to resource files Lexi_Expr.dat and Units.dat, respectively (required for support of measurement units);
+  * **CSF_SHMessage** defines the path to the messages file for *ShapeHealing*;
+  * **CSF_XSMessage** defines the path to the messages file for **STEP** and **IGES** translators;
+  * **CSF_StandardDefaults**, **CSF_StandardLiteDefaults*, **CSF_XCAFDefaults**, and **CSF_PluginDefaults** define paths to directory where configuration files for OCAF persistence are located (required for open/save operations with OCAF documents);
+  * **CSF_IGESDefaults** and **CSF_STEPDefaults** (optional) define paths to directory where resource files of **IGES** and **STEP** translators are located;
   * **CSF_XmlOcafResource** is required in order to set the path to **XSD** resources, which defines XML grammar.
   * **CSF_MIGRATION_TYPES** is required in order to read documents that contain old data types, such as *TDataStd_Shape*;
-  * **TCLLIBPATH**, **TCL_LIBRARY**, **TK_LIBRARY** and **TIX_LIBRARY** are required to allow work with **DRAW** and **WOK**.
 
 @section OCCT_OVW_SECTION_7 Getting Started
 
@@ -420,14 +389,14 @@ Draw contains:
 You can add new custom test harness commands to Draw in order to test 
 or demonstrate a new functionality, which you are developing.
 
-Currently DRAW Test Harness is a single executable called DRAWEXE.
+Currently DRAW Test Harness is a single executable called *DRAWEXE*.
 
 Commands grouped in toolkits can be loaded at run-time thereby implementing dynamically loaded plug-ins. 
 Thus you can work only with the commands that suit your needs adding 
 the commands dynamically without leaving the Test Harness session.
 
 Declaration of available plug-ins is done through special resource file(s). 
-The pload command loads the plug-in in accordance with 
+The *pload* command loads the plug-in in accordance with 
 the specified resource file and activates the commands implemented in the plug-in.
 
 The whole process of using the plug-in mechanism as well as the instructions for extending Test Harness is described in the @ref occt_user_guides__test_harness.
@@ -595,9 +564,9 @@ There are two samples are representing usage OCCT framework on Android mobile pl
 jniviewer
 @image html /overview/images/samples_java_android_occt.jpg
 @image latex /overview/images/samples_java_android_occt.jpg
-Java - See \subpage samples_java_android_occt "Readme" for details.
+Java -- See \subpage samples_java_android_occt "Readme" for details.
 
 AndroidQt
 @image html /overview/images/samples_qml_android_occt.jpg
 @image latex /overview/images/samples_qml_android_occt.jpg
-Qt - See \subpage samples_qml_android_occt "Readme" for details.
+Qt -- See \subpage samples_qml_android_occt "Readme" for details.