* Add status flag to GeomFill_Pipe
* Add myIsPerform flag to GeomFill_Pipe
* Add checking vectors in GeomFill_CorrectedFrenet
* Add boolean return to SetCurve virtual methods
* Add test case
ProjLib/ProjLib_ProjectOnPlane.cxx - formatting
0031661: Modeling Data - Algorithm crashes when projecting parabola or hyperbola to plane
ProjLib/ProjLib_ProjectOnPlane.cxx - building of analytical parabola and hyperbola is added
bugs/moddata_3/bug31661_* - new test cases are added
Added "ELAPSED TIME" to test case log.
Improved syntax of chrono/dchrono command:
added -elapsed, -userCPU, -sysCPU options printing individual values in seconds.
OSD_Chronometer::IsThisThreadOnly() - added missing accessors to the property.
Fixed GeomAdaptor_Curve::LocalContinuity() for periodic curves.
Fixed GeomAdaptor_Curve::NbIntervals() for periodic curves.
Fixed GeomAdaptor_Curve::Intervals() for periodic curves.
Improved definition of length in tests.
Update Geom2dAdaptor_Curve to the same behavior.
* Fix error on computing V first derivative on a cone (take into account the slope of the conical generatrix).
* Add DRAW command 'sderivative' to compute certain derivative on a surface.
GeomInt/GeomInt_IntSS.cxx - handle flat cone case
IntPatch/IntPatch_Intersection.hxx, IntPatch/IntPatch_Intersection.cxx - method for preparing surfaces is added
bugs/lowalgos/intss/bug24772 - test case is changed according new behavior
Incorrect curve handling.
If curve doesn't have trims and vertexes, we handle it such as trimmed curve, but it should be a simple curve.
Curves with only one vertex and one trim should handle by another way, such as a curve that has trims but doesn't have vertexes.
So I added conditions which handles these cases
Do not limit the normalization factor of the highly anisotropic parametric space when filtering start points in the algorithm of walking line construction.
Additionally check the knots are in the increasing orders when merging two B-spline curves
Improved the test stability: created 10 iterations of measurements and take the minimum to
minimize the affect of other processes and threads; increased the compare range of
the quarter and the whole of the document load.
Image_PixMap has been extended to support definition of 3D bitmap (as an array of 2D slices).
Graphic3d_TypeOfTexture enumeration values have been renamed to include full enum prefix.
Added Graphic3d_TypeOfTexture_3D redirecting to GL_TEXTURE_3D.
OpenGl_Texture::Init() has been extended to allow initialization of 3D texture.
Graphic3d_Texture2Dmanual merged into Graphic3d_Texture2D and marked as deprecated alias.
Graphic3d_TOT_2D_MIPMAP has been deprecated in favor of dedicated Graphic3d_TextureRoot::SetMipMaps().
Added Graphic3d_Texture3D class.
vtexture - added argument -3d for uploading 3D texture.
GeomInt/GeomInt_IntSS.cxx, IntTools/IntTools_FaceFace.cxx - setting deflection 0.01
for case of two bspline surfaces
IntPolyh/IntPolyh_Intersection.cxx, IntPolyh/IntPolyh_Intersection.hxx - status IsParallel is added
BndLib/BndLib_Add3dCurve.cxx, IntTools/IntTools_TopolTool.cxx - fix small bugs
Correction of test scripts according to current behavior of algorithms
lowalgos/intss/bug32849 - test case added
IntPatch_ALineToWLine.cxx - setting minimal number of points in a WLine depending on step size
IntPatch_WLineTool.cxx - fix WLines connecting check condition
test cases has been changed according to new behavior
Add the case of closed, smooth but not periodic surface (unification of faces lying on it if the flag "myConcatBSplines" is true - modify the underlying surface to make it periodic).
Added PLY writing tools RWPly_CafWriter and RWPly_PlyWriterContext.
Added tool BRepLib_PointCloudShape generating point cloud from shape in two ways:
- random points on surface with specified density;
- points from triangulation nodes.
StdPrs_ToolTriangulatedShape::ComputeNormals() has been moved to
BRepLib_ToolTriangulatedShape for reusing outside of AIS.
Command vpointcloud has been extended to use new generation tool.
Command writeply has been added to write triangulation or point set into PLY format.
ApproxInt_Approx, ApproxInt_KnotTools, BRepApprox_Approx,
GeomInt_IntSS, IntTools_FaceFace:
Analysis of curvature is added for adjusting ParametrizationType
IntPatch_Intersection.cxx - adding methods for estimation of UV max step depending on used surfaces
GeomInt_IntSS.cxx, IntTools_FaceFace.cxx - using methods for max step estimation
Approx_SameParameter.cxx - adding control against big values.
BOPAlgo_PaveFiller_6.cxx - adjusting position of faces before intersection
A flag not to raise an exception is used on reading of an XCAF document. If such a shape with scaling transformation is stored in the document, it should be read.
Added new option Graphic3d_RenderingParams::ToSmoothInterlacing enabled by default.
Added -smooth option to vstereo command.
Added -dpiAware option to vinit command (Windows).
1) BRepFill_Generator and BRepOffsetAPI_ThruSections now support 'non-destructive' mode for the input shapes (sections wires). The shape history of this algorithms also has been modified.
2) New test grids (based on the previous ones) have been added. These new cases use locked shapes as input arguments
3) The option '-safe' has been added to 'thrusections' command
Add more faces for intersection in rebuilding process basing on the connection of the splits of offset faces (special treatment for the artificially invalid faces).
When rebuilding faces add vertices common for faces for trimming the new intersection edges.
Adjust existing and create new test cases.
Use distance criteria additionally to parameter criteria when verifying the extrema solution to belong to the edge boundary.
Refactor the BRepExtrema_DistanceSS class to remove the excessive methods with mirrored parameters.
A copy of myface is made, where further on the copy the geometry changes. We connect the face, wire, edge of the original shape with the one whose geometry was changed. This is done in order to get the original shape in the TransferWire() and TransferEdge() methods.
Prs3d_Drawer getters now return NULL instead of implicitly creating "default" aspects.
Added missing initialization of default properties in AIS_InteractiveContext.
AIS_InteractiveContext::setContextToObject() - added missing propagation of Context to child presentations.
Adds two new overloaded 'ComputeDeviation()' function (approx & exact) to GeomLib_Tool class to calculates the parameter in the curve where the maximum deviation is obtained between the curve and the line segment connecting its points with the specified parameters
Adds new '2ddeviation' DRAW command for 'ComputeDeviation()' functional testing
In STEPCAFControl_Writer::WriteNames, write the names of components
even if the name of the assembly is absent.
In STEPControl_ActorWrite::TransferSubShape, move assembly structure
information to the beginning of the list of results, so that CDSR
information of this assembly became preceding CDSR of any sub shapes.
Add '-exact' option to checkshape command to use exact method to validate edges using BRepLib_ValidateEdge class. Default mode is calculating in finite number of points.
- Added getting and setting Material, VisMaterial and Props to XCAFDoc_Editor::Expand.
- Added XCAFDoc_Editor::Extract to transfer part to a new location
- XCAFDoc_Editor::Extract allows to extract a part as a component or simply extract to an empty label with attached colors, layers, materials, vismaterials and props
- Added XCAFDoc_Editor::CloneMetaData to clone shape's attributes to new location
- Added XCAFDoc_Editor::CloneShapeLabel to clone shape to new document
- Added XCAFDoc_DocumentTool::Check*Tool methods to check an existing of an any tool
- Protected against creating a new label for non-existent tools via extract or expand process
move algorithm of obtaining results from function gproject to method ProjLib_CompProjectedCurve::Perform;
fix tolerances in ProjLib_PrjResolve::ProjLib_PrjResolve;
new treatment of myMaxDist;
use extend bounds in approximation;
add test;
test case "bugs modalg_5 bug25980", "bugs modalg_7 bug24185" have been changed according to new behavior.
