New sample created for ray tracing in DRAW: samples/tcl/raytrace.tcl, rendering OCCT bottle with glass on a rectangular table, with shadows and reflections (if OpenCL is available). Sample bottle.tcl retains only modeling part.
I. New features:
I.1 class BOPAlgo_ShellSplitter
The new class BOPAlgo_ShellSplitter has been added.
Purpose: The class provides the splitting of the set of connected faces
on separate loops
II. Changes:
II.1. class BOPAlgo_BuilderSolid
- method:
void BOPAlgo_BuilderSolid::PerformLoops()
the changes that provide parallel run the ShellSplitter algorithm have been done.
- method:
void BOPAlgo_BuilderSolid::PerformAreas()
the classification the grows and holes has been done using
the algorithm of unbalanced binary tree of overlapped bounding boxes
1) Used more accurate Select3D_SensitiveTriangulation instead of Select3D_SensitiveFace for rectangular sensitives in AIS_Plane::ComputeSelection, AIS_Dimension::ComputeSelection
2) Test case for CR24564
1) Allow AIS_InteractiveContext::Update to check, re-project and recompute selection structures even if presentations are not "to be updated".
2) Test case bugs vis bug24569.
Small correction of test case for issue CR24569
Main problem:
Algorithm of locale extrema, which is called by "sameparameter" command, cannot find extrema because extremal point is far from initial point. Therefore, reparametrization of edge's curve (for same-parameter) cannot be made properly.
Solve:
Using of global extrema (see Approx_SameParameter.cxx).
As the given edge contains two 2d-curves and the second from them is problem, for select needed curve, an interface of "mk2dcurve" DRAW-command is changed. Now there can be used an index of curve (by default, index = 1, as earlier), see help for more detail information.
Test "heal advanced Z3":
Now checkshape finds only two invalid subshapes. Earlier, it found four subshapes. I think it is not regression. Therefore, test case was changed.
Tolerance reducing.
test
Package "BndLib":
Functionality of the files "BndLib_Compute.gxx", "BndLib_Compute2d.cxx" and "BndLib_Compute3d.cxx" (methods Compute(...) for 2d and 3d cases) moved to BndLib.cxx (to the template method Compute(...)). For that had to edit work with points and coordinates a little i.e. method Compute(...) was updated and some methods where Compute(..) is called in "BndLib.cxx".
Handle classes now use 0 as invalid value for pointer instead of custom (and platform-dependent) value like 0xfefd0000.
Compiler macros UndefinedHandleAddress and _OCC64 are eliminated.
In the package "XmlObjMgt" class "XmlObjMgt_Array1" was converted to the non-generic.
And some changes were made in "XmlNaming" package for correct compilation of the application.
Implementation of Ray Tracing mode in standard Qt sample
Fix compile warnings in Qt samples.
Fix tabs in Common-string.ts.
Update Code style.
0024415: Update QT samples
Code which was based on QT3 was removed. Some bugs and warnings has been also fixed.
Porting from QT4 to QT5 sample files.
StdPrs_ToolShadedShape::IsClosed():
- return true if shape is closed Solid (NOT just free closed Shell)
- accept compound of closed Solids as well
- ignore Solids with incomplete triangulation
TKOpenGl, automatically disable back face culling when:
- clipping/capping planes are in effect
- for translucent objects
Update bug23227 test case (now back faces are clipped).
OpenGl_Workspace::AspectFace() - disable culling in case of hatched style
Fixed type casts in NCollection maps
Avoid invalid type cast in handling of LDOM text object
Use correct pointer type in callback function of Graphic3d_CGraduatedTrihedron class
Format of printf() simplified in IntPatch_Point.cxx
Incorrect curve is got after Decompose method applying. This method's using should be restrict.
Decomposition is required if intersection curve contains some parts, where U-parameter on quadric surface changes too sharply.
Decompose method is called for Cone and Sphere only (it does not require for Cylinder).
Comments are changed by jgv.
Test case for issue CR24427
Added test case bugs/moddata_3/bug24427_2
Compiler warning is liquidated.
Test is corrected.
Projection of 3d points corresponding to range of edge on 2d curve considered as successful for all cases to except for cases when projection is not made.
Initialization initial values of flags
Modification initial values of flags setting status Done for first and last parameters
Adding new draw-command for issue CR24370
Test case for issue CR24370
DRAW command discrCurve was created to test GCPnts_UniformAbscissa by count of discretization point.
Two bugs in GCPnts_AbscissaPoint were fixed.
DRAW tests for the bug were created.
for each test execution a specific directory is created in a temp directory.
the format of the created directory is next: group-gridname-casename_<data>_<time with secs>
indentations in changes were realigned
Output of warning messages on use of temporary directory disabled
The intersection between Cone and one of the following surfaces: Cylinder, Sphere, Cone and Torus
is treated as analytical when the axes of the surfaces are collinear.
Test case for issue CR24505
Added test case bugs/modalg_5/bug24204
Modified following test cases:
bugs modalg_3 bug605 - case with bad input data, command "settolerance w1 1.e-7" was added;
bugs modalg_4 bug629 - wrong case, now the algorithm can not build pipes on such profiles, test case was removed;
bugs modalg_4 bug13595_1, bug13595_1 - number of subshapes was has changed;
bugs modalg_5 bug23706_2 - square of resulting face was changed;
bugs modalg_5 bug23870_1, bug23870_2, bug23870_3, bug23870_4, bug23870_5 - the number of subshapes was changed.
Patch 06
I.1. class Bnd_Box2d
- method:
inline Standard_Real Bnd_Box2d::SquareExtent() const
has been added.
Purpose : The method returns the squared diagonal of the bounding box.
I.3. class BOPCol_BoxBndTree
has been added.
Purpose : The class is the instantiation of the algorithm of unbalanced binary tree
of overlapped bounding boxes 3D.
I.4. class BOPCol_Box2DBndTree
has been added.
Purpose : The class is the instantiation of the algorithm of unbalanced binary tree
of overlapped bounding boxes 2D.
I.5. class BOPAlgo_Algo
- method:
void BOPAlgo_Algo::SetRunParallel(const Standard_Boolean theFlag)
has been added.
Purpose: Set the flag of parallel processing
if <theFlag> is true the parallel processing is switched on
if <theFlag> is false the parallel processing is switched off
- method:
Standard_Boolean BOPAlgo_Algo::RunParallel()const
has been added
Purpose: Returns the flag of parallel processing
II.1. class BOPAlgo_Builder
- method:
void BOPAlgo_Builder::SetRunParallel(const Standard_Boolean theFlag)
has been removed due to I.5.
- method:
Standard_Boolean BOPAlgo_Builder::RunParallel()const
has been removed due to I.5
II.2. class BOPDS_BoxBndTree
has been removed due to I.3
II.3. classes
BOPDS_Iterator,
BOPDS_IteratorSI,
BOPDS_SubIterator
BOPAlgo_PaveFiller,
BOPAlgo_Builder
the calls to BOPDS_BoxBndTree have been changed to
the calls to BOPCol_BoxBndTree
due to I.3
II.4. class BOPAlgo_BuilderFace
- method:
void BOPAlgo_BuilderFace::PerformLoops()
the changes that provide parallel run the WireSplitter algorithm have been done.
- method:
void BOPAlgo_BuilderFace::PerformAreas()
the classification the grows and holes has been done using
the algorithm of unbalanced binary tree of overlapped bounding boxes
II.5. class BOPAlgo_WireSplitter
- method:
void BOPAlgo_WireSplitter::SplitBlock(const TopoDS_Face& myFace,
BOPTools_ConnexityBlock& aCB)
the method is transferred to the static, the signature of the method have been changed
- method:
void BOPAlgo_WireSplitter::MakeWires()
the changes to provide parallel run the SplitBlock algorithm have been done
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
