Changes:
class IntTools_FaceFace
- method:
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
The treatment of infinite planes was corrected.
Test case for issue CR25818
I. New features:
No new features.
II. Changes:
II.1. class BOPAlgo_PaveFiller
- method:
void BOPAlgo_PaveFiller::PerformEE()
has been changed.
Intended set of VE interferences has been refined
to avoid unwanted overlaps of pave blocks
- method:
void BOPAlgo_PaveFiller::ForceInterfVE(const Standard_Integer nV,
Handle(BOPDS_PaveBlock)& aPB,
BOPDS_MapOfPaveBlock& aMPBToUpdate)
The initialization of increment of VE interferences has been added.
- method:
Standard_Boolean BOPAlgo_PaveFiller::ForceInterfVF
(const Standard_Integer nV,
const Standard_Integer nF)
The initialization of increment of VF interferences has been added.
III. Modified entities:
packages:
BOPAlgo
Test case for issue CR25847
Handling of degenerated parametrization (like sphere) added in IWalker.
Minor corrections.
Test case for issue CR25842
Correction of test case for issue CR25842
If Walking-lines are coincided we kept line, which contains more points or has more length (because it is more precisely, most likely).
Test cases for issue CR25828
Some test cases were changed
1. class BOPAlgo_PaveFiller
method void BOPAlgo_PaveFiller::PerformEF()
Do not create intersection vertices in case if it lies ON the boundary of the face.
2. class IntTools_Context
New method
Standard_Boolean IntTools_Context::IsPointInFace
(const gp_Pnt& aP,
const TopoDS_Face& aF,
const Standard_Real aTol)
has been implemented to check if the point IN the face.
3. class IntTools_EdgeFace
method
void IntTools_EdgeEdge::FindBestSolution(const Standard_Real aT11,
const Standard_Real aT12,
const Standard_Real aT21,
const Standard_Real aT22,
Standard_Real& aT1,
Standard_Real& aT2)
Treatment of the touching cases.
Test cases for issue CR24646
Correction of test cases for issue CR24646
Changes:
class BOPTools_AlgoTools
method:
Standard_Boolean BOPTools_AlgoTools::GetFaceOff
(const TopoDS_Edge& theE1,
const TopoDS_Face& theF1,
BOPTools_ListOfCoupleOfShape& theLCSOff,
TopoDS_Face& theFOff,
Handle(IntTools_Context)& theContext)
has been changed.
The comparison of the angles done with the angular tolerance value
Test case for issue CR25838
1. Algorithm of adjusting parameter to the surface boundaries has been changed.
2. Control First and Last parameters in BRepLib_CheckCurveOnSurface::Compute() function.
Test cases for issue CR25819
Updated test-cases from branch CR24255_3
0024255: Regressions in test cases on OCCT vc9 win64 Release
Small refactoring.
Fix for CASE bugs modalg_5 bug25298_09: FAILED (error)
Test-cases correction (bugs modalg_5 bugs25804_1, bug25704_2)
Changes:
class BOPAlgo_Builder
method:
void BOPAlgo_Builder::FillIn3DParts
(BOPCol_DataMapOfShapeListOfShape&,
BOPCol_DataMapOfShapeShape&,
const BOPCol_BaseAllocator& )
has been optimized and
modified to provide parallel treatment.
Correction of compilation errors
Test cases for issue CR25788
Test commands for #23952 refactored to:
- avoid interaction with Tcl interpreter from thread functions (fixes sudden crash)
- get shapes outside of the thread functions (keeping only code being tested inside)
- run 100 threads instead of 2 (increases chance for data race to exhibit if present)
Linux compilation problems fixed.
Changes:
class BRepCheck_Solid
method:
void BRepCheck_Solid::Minimum()
has been changed. The treatment of shells with INTERNAL faces has been added.
Added test case bugs/modalg_5/bug25735
Added TODOs in test cases according to issue 25735.
1. Curve boundaries were more precised.
2. Some test cases were changed in accordance of their new behavior.
3. Code fragment for WLines joining was moved to higher level (for more universal using in the future).
Code was changed in accordance with the last remark.
Added test cases bugs/modalg_5/bug25715_1 bug25715_2 bug25715_3
Changes:
class BOPTools_Set
method:
void BOPTools_Set::Add(const TopoDS_Shape& theS,
const TopAbs_ShapeEnum theType)
has been changed. The treatment of INTERNAL edges has been added.
Added test case bugs/modalg_5/bug25721
Interface of bopcurves DDRAW-command were extended. Now it is possible to obtain
a) only 3D-curves;
b) 3D-curves and 2D-curves on one of surfaces intersected (surface can be selected);
c) 3D-curves and 2D-curves on every surface intersected.
Use "help bopcurves" to see detail information.
Added test cases bugs/modalg_5/bug25697_1 bug25697_2
Small changes in test case bugs/modalg_5/bug25697_2
1. The tool of computing the max distance between 3D curve and its 2d representation on the face
has been moved from static methods in BOPTools_AlgoTools class to BRepLib_CheckCurveOnSurface class.
2. The tools has been applied to 2d curves built during Boolean Operation
and to some intersection curves.
3. The functions
Standard_Boolean BOPTools_AlgoTools::ComputeTolerance
(const TopoDS_Face& theFace,
const TopoDS_Edge& theEdge,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
and
Standard_Boolean IntTools_Tools::ComputeTolerance
(const Handle(Geom_Curve)& theCurve3D,
const Handle(Geom2d_Curve)& theCurve2D,
const Handle(Geom_Surface)& theSurf,
const Standard_Real theFirst,
const Standard_Real theLast,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
have been developed for easy access to BRepLib_CheckCurveOnSurface functionality.
class IntTools_FaceFace
method void IntTools_FaceFace::ComputeTolReached3d()
Case for Plane/BSpline intersection added for treatment.
Test case for issue CR25597
Fix for regression boolean bsection N7.
class BOPAlgo_PaveFiller
method
void BOPAlgo_PaveFiller::UpdateFaceInfo
(BOPDS_DataMapOfPaveBlockListOfPaveBlock& theDME,
const BOPCol_DataMapOfIntegerInteger& theDMV)
Updating Face Info information with new vertices created in PostTreatFF.
Correction boolean/bsection/N2
Updated test cases.
Changes:
1.
Class BOPTest_Chronometer
The class definition that depends on TBB has been removed
2.
For the following commands:
>bop s1 s2 [tol]
>bopcommon r s1 s2 [tol]
>bfuse r s1 s2 [tol]
>bcut s1 s2 [tol]
>btuc r s1 s2 [tol]
>bsection r s1 s2 [-n2d/-n2d1/-n2d2] [-na] [tol]
>mkvolume r b1 b2 ... [-c] [-ni] [-s] [tol]
>bopcheck Shape [level of check: 0 - 9] [-t -s] [-tol tol]
>bopargcheck Shape1 [[Shape2] [-F/O/C/T/S/U] [/R|F|T|V|E|I|P|C|S]] [#BF] [-tol tol]
>bfillds [-s -t] [tol]
the syntax has been changed. Parameter [tol] has been removed.
The value "tol" (i.e. Fuzzy Value) is option for the algorithm.
If it is necessary, the value "tol" can be set by the command:
>bfuzzyvalue value
see
http://tracker.dev.opencascade.org/view.php?id=25614
for more details
3.
For the following commands:
>bopcheck Shape [level of check: 0 - 9] [-t -s] [-tol tol]
>bfillds [-s -t] [tol]
>bbuild r [-s -t]
>bbop r op [-s -t]
the syntax has been changed. Parameter [-s] has been removed.
Parameter [-s] was to provide the sequential mode of the computations.
The mode of the computations is option for the algorithm.
The mode of the computations can be set by the command:
>brunparallel [0/1]
1 -sets the parallel mode of the computations
0 -sets the sequential mode of the computations
see
http://tracker.dev.opencascade.org/view.php?id=25614
for more details
class BOPTools_AlgoTools
1. method Standard_Boolean FindPointInFace(const TopoDS_Face& aF,
const gp_Pnt& aP,
gp_Dir& aDB,
gp_Pnt& aPOut,
Handle(IntTools_Context)& theContext,
GeomAPI_ProjectPointOnSurf& aProjPL,
const Standard_Real aDt,
const Standard_Real aTolE)
Use different method of finding a point in the face if the start and projected points are close to each other.
2. method Standard_Real MinStep3D(const TopoDS_Edge& theE1,
const TopoDS_Face& theF1,
const BOPTools_ListOfCoupleOfShape& theLCS,
const gp_Pnt& aP)
The min 3D step has been increased for the spherical faces.
Test case for issue CR25600
Correction of test case for issue CR25600
1. Dump of WLine is shown with more precise.
2. Equation solving with more precise.
3. Dump of Multy-line.
4. Code optimization.
Some test cases were updated in accordance with their new behaviour.
Correction of test cases for issue CR25531
class BOPTools_AlgoTools2D
method void BOPTools_AlgoTools2D::Make2D (const TopoDS_Edge& aE,
const TopoDS_Face& aF,
Handle(Geom2d_Curve)& aC2D,
Standard_Real& aFirst,
Standard_Real& aLast,
Standard_Real& aToler)
Perform projection with the tolerance of the edge.
Test case for issue CR25625
I. New features:
1.1. class BOPAlgo_PaveFiller
method:
void BOPAlgo_PaveFiller::SetArguments(const TopTools_ListOfShape& theLS)
has been added to provide the setting argumemts through
TopTools_ListOfShape
1.2. class BOPAlgo_Builder
method:
void BOPAlgo_Builder::SetArguments(const TopTools_ListOfShape& theLS)
has been added to provide the setting argumemts through
TopTools_ListOfShape
1.3. class BOPAlgo_BOP
method:
void BOPAlgo_BOP::SetTools(const TopTools_ListOfShape& theLS)
has been added to provide the setting tools through
TopTools_ListOfShape
1.4. class BRepAlgoAPI_BuilderAlgo
construcror:
BRepAlgoAPI_BuilderAlgo::BRepAlgoAPI_BuilderAlgo
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
method:
void BRepAlgoAPI_BuilderAlgo::SetArguments
(const TopTools_ListOfShape& theLS)
has been added to provide the setting argumemts
method:
const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Arguments()const
has been added to provide access to the argumemts
1.5. class BRepAlgoAPI_BooleanOperation
method:
void BRepAlgoAPI_BooleanOperation::SetTools
(const TopTools_ListOfShape& theLS)
has been added to provide the setting tools
method:
const TopTools_ListOfShape& BRepAlgoAPI_BooleanOperation::Tools()const
has been added to provide access to the tools
1.6. class BRepAlgoAPI_Common
construcror:
BRepAlgoAPI_Common::BRepAlgoAPI_Common
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.7. class BRepAlgoAPI_Cut
construcror:
BRepAlgoAPI_Cut::BRepAlgoAPI_Cut
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.8. class BRepAlgoAPI_Fuse
construcror:
BRepAlgoAPI_Fuse::BRepAlgoAPI_Fuse
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.9. class BRepAlgoAPI_Section
construcror:
BRepAlgoAPI_Section::BRepAlgoAPI_Section
(const BOPAlgo_PaveFiller& aPF)
has been added to provide the construction
of the object using BOPAlgo_PaveFiller object
1.10. class BOPTest
method:
void BOPTest::APICommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to launch the algorithms
implemented in BRepAlgoAPI package using DRAWEXE application.
Commands:
>bapibuild r
performs General Fuse algorithm.
r -the result of the operation
>bapibop r type
performs Boolean Operation agorithm
r -the result of the operation
type -type of the operation:
0-common
1-fuse
2-cut
3-cut21
4-section
method:
void BOPTest::OptionCommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to set/get the options that is
necessary for the algorithms implemented in BRepAlgoAPI package.
Commands:
>boptions
dump the state of current options
>brunparallel [0/1]
1 -sets the parallel mode of the computations
0 -sets the sequential mode of the computations
>bfuzzyvalue value
sets the fuzzy value
-------------------------------------------------------------------------------------------------------------
II. Changes:
II.1. class BRepAlgoAPI_BuilderAlgo
methods:
const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Generated
(const TopoDS_Shape& aS)
const TopTools_ListOfShape& BRepAlgoAPI_BuilderAlgo::Modified
(const TopoDS_Shape& aS)
Standard_Boolean BRepAlgoAPI_BuilderAlgo::IsDeleted
(const TopoDS_Shape& aS)
Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasModified() const
Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasGenerated() const
Standard_Boolean BRepAlgoAPI_BuilderAlgo::HasDeleted() const
has been redefined to provide access to the history
II.1. class BOPTest
method:
void BOPTest::APICommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to launch the algorithms
implemented in BRepAlgoAPI package using DRAWEXE application.
method:
void BOPTest::OptionCommands(Draw_Interpretor& theCommands)
has been added to provide tcl commands to set/get the options that is
necessary for the algorithms implemented in BRepAlgoAPI package.
II.2. class BRepAlgoAPI
method:
void BRepAlgoAPI::DumpOper(const Standard_CString theFilePath,
const TopoDS_Shape& theShape1,
const TopoDS_Shape& theShape2,
const TopoDS_Shape& theResult,
BOPAlgo_Operation theOperation,
Standard_Boolean isNonValidArgs)
has been removed. The contents has been shifted into the file:
BRepAlgoAPI_BooleanOperation.cxx
II.3. classes QANewModTopOpe_Glue, QANewModTopOpe_Intersection
the modifications have been done to provide the consistency with the
modifications in BRepAlgoAPI package [I].
-------------------------------------------------------------------------------------------------------------
III. Modified entities:
packages:
BOPAlgo
BRepAlgoAPI
BOPTest
QANewModTopOpe
Test cases for issue CR25614
The functionality to decide, whether the edge is degenerated, was shared via BRepLib_MakeFace. The verification of producing degenerated edges was added to BRepLib_MakeShell.
Test case for issue CR25591
New features:
1. class BRepCheck_Solid
The class is to check a solid per se.
The scan area is:
i. Shells that overlaps each other
Status: BRepCheck_InvalidImbricationOfShells
ii. Detached parts of the solid (vertices, edges)
that have non-internal orientation
Status: BRepCheck_BadOrientationOfSubshape
iii. For closed, non-internal shells:
iii.1 Shells containing entities of the solid that
are outside towards the shells
Status: BRepCheck_SubshapeNotInShape
iii.2 Shells that encloses other Shells
(for non-holes)
Status: BRepCheck_EnclosedRegion
Changes:
1. enumeration BRepCheck_Status
members:
InvalidImbricationOfShells,
EnclosedRegion,
has been added
2. class BRepCheck
method:
void BRepCheck::Print(const BRepCheck_Status stat,
Standard_OStream& OS)
has been modified to take into account II.1
3. class BRepCheck_Analyzer
method:
void BRepCheck_Analyzer::Put(const TopoDS_Shape& S,
const Standard_Boolean B)
has been modified to take into account I.1
4. class BRepTest
function:
void StructuralDump(Draw_Interpretor& theCommands,
const BRepCheck_Analyzer &theAna,
const Standard_CString ShName,
const Standard_CString Pref,
const TopoDS_Shape &theShape)
has been modified to take into account I.1, II.1
Test cases for issue CR25509
Correction of test cases for issue CR25509
-Set algorithm flag NotDone if there is a non-degenerated edge with absent 3D curve.
-Check IsDone flag in thrusection command.
-Add test case bugs/modalg_5/bug25568.
Small correction of test case for issue CR25568
Sometimes curve or surface, which is defined as C0, has continuity G1 or above. Offset can be built from these shapes.
Therefore, this extended checking was added into SetBasisCurve and SetBasisSurface methods.
Main changes in function BRepOffset_Tool::ExtentFace(...):
* "return" is added if intersection (in 2D-space) between two edges in a face cannot be found.
Basis curve/surface continuity value found (if G1-checking is OK) is set up as BasisContinuity (see myBasisCurveContinuity and myBasisSurfContinuity members which is returned by GetBasisCurveContinuity and GetBasisSurfContinuity() methods). This fact is used in Geom2dAdaptor and in GeomAdaptor classes.
Possibility is entered, which allows for basis elements of offset curve/surface to avoid of C0-checking.
Test cases were changed according to their new behavior.
Test-cases for issue #25124
Implemented additional verification that the point found by Extrema is placed inside the face. This way turns off searching the additional inner point.
Test case for issue CR25555
