Incorrect work of HLR algorithm caused by usage of wrong tolerances, wrong sampling of 2d curve and some other bugs are fixed.
Test cases for issue CR27341
Command checkplatform was created.
All test cases were updated.
Global variable os_type was eliminated.
New option -osx (MacOS) for procedure checkplatform was added.
When reducing the tolerance values of the vertices put on section curves take into
account all section curves, not only those for which the tolerance have been reduced
(method void BOPAlgo_PaveFiller::CorrectToleranceOfSE()).
The new protection has been added to avoid reducing of tolerance values of vertices
to the values less than the tolerance values of edges containing these vertices.
Adjusting of test case bugs/modalg_5/bug25232_9
Possibility to read shapes and OCAF documents from old persistence format (Std and StdL schema) is restored.
Test cases used old persistent files on input are restored with suffix "_std"
Removing toolkit from OS package
Lipchitz constant approximation and fixes in global optimization algorithm added to improve performance.
Test case added.
Possibility to freeze Lipchitz constant is added to improve performance.
1. Step of Walking-line has been increased as possible and now computes by iteratively adaptive algorithm (every iteration checks if current step is too big/small and decreases/increases one).
2. Interface of IntWalk_PWalking class has been changed
2.1. Method MaxStep() has been added in order to know about maximal distance between 2D-points.
2.2. Method ComputePasInit(...) has been added in order to initial step value computation.
2.3. Fields myTolTang (tolerance for intersection algorithm) and myStepMin (minimal step value) have been added.
Correction of some test cases.
Creation test case for this issue.
Changes to eliminate compiler warnings.
Extrema Curve / Surface algorithm changed to perform more accurate search.
test case bug25232_8 - improvement, one additional intersection point is detected now.
test case bug23830 - normal behavior, position of extrema is changed.
test case for original issue added.
Method BRepGProp::LinearProperties() is corrected to treat not geometric edges (their length is zero). To avoid wrong working of command nexplode global properties are calculated as point properties of vertexes. Small value Epsilon(1.) is used as density of points. This prevents exception on shapes that contain such edges, e.g. copy of a wire containing degenerated edge.
Method BRep_Tool::IsGeometric() is optimized to avoid nested iteration for check of 3D curve for Null.
Small bug is fixed in GProp_PGProps.cxx
0026796: The result of General Fuse operation is self-intersecting shape
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Various bug fixes in the algorithm:
- Compute correct tolerance values for intersections of type Line/Line, Line/Plane, Plane/Plane.
- In case of Line/Plane intersection check if line's vertices lie on the plane.
- Do not allow decreasing of the tolerance value of the Line/Line intersection vertex.
- In IntTools_EdgeEdge, call the method FindParameters with proper 3D tolerance of the curve.
- Force making copy of a degenerated edge if its vertex is touched but no 2D intersection with other curves is found.
- Remove pave blocks both ends of which became referring to the same vertex after vertices substitution.
- Avoid exception in IntTools_Context::IsVertexOnLine if Extrema is not done.
- Reduce tolerance of vertex/edge using actual distances to interfered shapes if it was increased due to line/line, line/plane, or plane/plane small intersection angle.
- Update tolerance of edges to reach all representations in a common block.
- In V-E intersections, check if a vertex hits beyond shrunk range, in such case create V-V interference.
- Do not put a section edge to the result if it becomes to be a micro edge after updating its vertex.
- Correctly make vertices same-domain during the work of MakeBlocks.
- Decrease shrunk range at least on a Precision::Confusion() in addition to vertex tolerance.
- Add Confusion to bounding boxes of new shapes in DS
- Add tolerance Precision::Confusion() to compare distances of touching cases to fix regressions.
TODO marks have been removed from (or modified in) the following test cases (Improvements):
boolean bsection M3 N2 R2
boolean gdml_private B6 C2 C6 G7 I6 F6 J1 J4 M7 N1 N8 N9 O3 O4 O6 O8 O9 P1 P2 P5 Q1 Q3 Q5 S9 T2 U4 U5 U9 ZB5 ZB6 ZC1 ZC5 ZD3 ZD6 ZD7 ZH2 ZH5 ZI2 ZI5 ZI7 ZI9 ZJ3 ZJ4 ZJ7 F8 I6 G1
boolean volumemaker A5 A6 B3 B4 B7 B9 D3 D4 D7 F1
boolean bopcut_2d D5
bugs modalg_5 bug25043
bugs modalg_2 bug472_1 bug472_2 bug472_3
Test cases updated because they are still bad but can be accepted as non-regression:
boolean volumemaker C4 A3 A7 E6
bugs modalg_1 bug10232
boolean bsection N2
Put new TODO in the scripts:
bugs modalg_5 bug25232_9
bugs modalg_6 bug26619
bugs modalg_1 buc60462_2
bugs modalg_4 bug772
For the following tests the result in fix became better, so take fix result as the reference:
bugs modalg_5 bug24628
bugs modalg_6 bug26954_3
boolean volumemaker A4 B5 B6 C3 C8 D2 D5 F2
bugs modalg_2 bug472_2
bugs modalg_1 buc60776_1
- Add the method SetNonDestructive to API classes of user level
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
1. Algorithm of Restriction line processing has been improved in IntTools_FaceFace.cxx file.
2. Algorithm of checking, if Restriction line and Walking line are coincided has been improved in IntPatch_ImpPrmIntersection.cxx file.
3. Algorithm of extending check if starting point of Walking line is a tangent point has been added.
Small correction of some test cases.
Creation of test case for issue #0026699.
Small correction of test case for issue CR26699
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
Changed the rules for the types of the arguments for different operations:
1. FUSE: All arguments and tools should have the same dimension;
2. CUT: The MAXIMAL dimension of the ARGUMENTS should be less
or equal to the MINIMAL dimension of the TOOLS;
3. CUT21: The MINIMAL dimension of ARGUMENTS should be grater
or equal to the MAXIMAL dimension of the TOOLS;
4. COMMON: The arguments and tools could have any dimensions.
For the arguments of collection type (WIRE, SHELL, COMPSOLID)
the type will be passed into the result of the operation.
The documentation should be updated according to new behavior.
Documentation has been updated.
Implemented suggestions by MSV and some grammar changes.
Test cases for issue CR26565
Correction of test cases for issue CR26565
Correction of test cases for issue CR26565
The main reason of the bug is incorrect extending line in SeveralWlinesProcessing(...) function.
Additionally, interface of IntPatch_WLine::Dump(...) method has been changed.
Change some test cases according to their new behavior.
Test-case for issue #26621
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
Computing is unified. ComputeFastTol3d() method was deleted.
If intersection result contains 3D- and corresponded two 2D-curves then tolerance will be computed with using BRepLib_CheckCurveOnSurface algorithm (check same-parameter).
If intersection result contains only 3D-curve (getting 2D-curve can be switched off by users) then tolerance will be computed with using GeomAPI_ProjectPointOnSurf algorithm (projects some point of 3D-curve on the surface and finds maximal distance).
Some workarounds have been deleted.
Some test case have been changed.
1. JoinWLines algorithm has been improved.
2. Reference to the V-boundaries is deleted when computing step.
3. Decreasing the tolerance when computing parameters of WLine.
4. Adding boundary point is forbidden if it lies in prolongation of found ones.
5. Possible reason of exception has been eliminated.
6. Processing of critical point has been improved.
Test cases for this issue have been created.
Correction of some test case(s).
Test case bugs/modalg_6/bug26310_4 is added
Update of test-cases for issue #26310
C2 continuity intervals changed to Knots intervals in case of Bspline curve.
Fixed incorrect extremaPC usage.
Test case for issue CR26351
Update of test-cases according to the new behavior
Upgrade method of computing vertex tolerance.
Update function, which used the old method.
Test case for issue CR26241
Delete obsolete variables.
Small correction of test cases for issue CR26241
1. Conditions for adjusting and for breaking Walking-lines have been amended.
2. Processing of case when WLine should be broken has been changed.
Test cases for issues 26193 and 26208 have been added
Cosmetic correction of test-cases
Modification of test-case according to the new behavior.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
All uses of "MDTV-Standard" and "MDTV-Design" in tests changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
Formats changed: .std to .cbf, .dxc to .dbf.
Test groups renamed accordingly:
xcaf: brep_to_dxc -> brep_to_xbf, igs_to_dxc -> igs_to_xbf, stp_to_dxc -> stp_to_xbf, dxc -> xbf/A1, dxc_add_CL -> xbf_add_CL
xml: ocaf_std -> ocaf_cbf, xcaf_dxc -> xcaf_xbf
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
1. Unification of the polygons creation (it is regardless of arguments order).
2. Output of 2dintersect DRAW-command was changed.
3. Geom2dGcc_Circ2d2TanRadGeo.cxx:
Precise intersection point found by Extrema Curve-Curve method (dot product between every tangent vector and vector between points on two curves must be equal to zero).
4. Some comments have been translated from French to English.
Some test case have been updated.
Changes in accordance with the last remark
Test case for issue CR25593
1. Algorithm of aStepU1 computing was changed.
2. Interface to allow convert gp_XY(Z) to the math_Vector has been added.
3. Algorithm of point in V-boundaries computing has been changed.
4. Situation when intersection line walks along V-boundary of cylinder(s) is processed better.
5. Intersection lines are created with their individual step along U1 parameter.
6. Points processing has been moved to the assembly level.
7. Extend output of "bfuseblend" and "bcutblend" DRAW-command.
8. New option for "bfuseblend" and "bcutblend" command has been added.
Update Test cases
Test cases for issue CR25742
New features:
class BOPTools_AlgoTools2D
- method
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const BRepAdaptor_Surface& aBAS,
const Standard_Real aFirst,
const Standard_Real aLast,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
has been added.
The method uses the refetence to BRepAdaptor_Surface object as parameter.
The fact allows to avoid redundant computations such as
BRepTools::UVBounds(....)
Changes:
class BOPTools_AlgoTools2D
- method:
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const TopoDS_Face& aF,
const Standard_Real aT1,
const Standard_Real aT2,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
has been changed.
The changes are to provide the consistency with I.1
- method:
void BOPTools_AlgoTools2D::MakePCurveOnFace
(const TopoDS_Face& aF,
const Handle(Geom_Curve)& aC3D,
const Standard_Real aT1,
const Standard_Real aT2,
Handle(Geom2d_Curve)& aC2D,
Standard_Real& TolReached2d)
has been changed.
The changes are to provide the consistency with I.1
The restricted surface is used as data for the projection algorithm.
Test case for CR25982
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
Class IntTools_FClass2d
method:void IntTools_FClass2d::Init(const TopoDS_Face& aFace,const Standard_Real TolUV)
has been changed.
The cases where derivattive angles that are near to PI are considered as a sign to avoid express treatment for that wire
Test case for CR25969
1. Restriction line is processed in IntTools_FaceFace with using methods of GeomInt_IntSS class.
2. Check, if Restriction- and Walking-lines (or Restriction-Restriction lines) are coincided, has been added in IntPatch_ImpPrmIntersection.cxx (at that RLine is considered to be isoline only).
3. Check, if RLine and GLine are coincided, has been added in IntPatch_ImpImpIntersection.cxx.
4. Create new class IntPatch_PointLine, which is inherited from IntPatch_Line.
5. The reason of exception (in DEBUG MODE) has been eliminated.
New test cases for issue #25416 were added.
tests/bugs/modalg_5/bug24650 was modified.
