Two test cases are added. One for Boolean operation (it is good, because BO has been fixed already), and another for fixshape operation (it causes Draw crash).
The following changes have been made for improving the offset algorithm:
1. Multi-connexity support - intersection of the faces connected to the edge belonging to more than two faces is now performed.
2. Avoid intersection of the faces connected through internal edge.
3. Filling gaps (holes) in the splits of the created offset faces to increase possibility of creation of the closed volume from these splits.
Test cases for the issue.
Implementation of the new class *BOPAlgo_MakeConnected* for making the group of touching same-dimensional shapes connected.
Provide the material association for the first sub-elements of the input shapes.
Provide possibility to make the connected shape periodic.
Draw commands for new algorithm:
* makeconnected - make the input shapes connected or glued, performs material associations;
* cmaterialson - returns the materials located on the requested side of a shape;
* cmakeperiodic - makes the connected shape periodic in requested directions;
* crepeatshape - repeats the periodic connected shape in requested directions requested number of times;
* cperiodictwins - returns all periodic twins for the shape;
* cclearrepetitions - clears all previous repetitions of the periodic shape, keeping the shape periodic.
Documentation & test cases for the new algorithm.
Implementation of the new class *BOPAlgo_MakePeriodic* for making the shape periodic in 3D space.
Periodicity of the shape means that the shape can be repeated in any periodic direction any number of times without creation of the new geometry or splits.
The idea of this algorithm is to make the shape look similarly on the opposite sides or on the period bounds of periodic directions.
It does not mean that the opposite sides of the shape will be mirrored. It just means the the opposite sides of the shape should be split by each other and obtain the same geometry on opposite sides.
Such approach will allow repeating the shape, i.e. translating the copy of a shape on the period, without creation of new geometry because there will be no coinciding parts of different dimension.
Draw commands for the new algorithm:
* makeperiodic - makes the shape periodic in required directions;
* repeatshape - repeats the periodic shape in requested periodic direction;
* periodictwins - returns the periodic twins for the shape;
* clearrepetitions - clears all previous repetitions of the periodic shape.
Documentation & test cases for the algorithm.
1. Test case for the issue has been created. The issue is fixed by the patch #26106.
2. Since now, "tricheck" command uses edge tolerance instead of edge deflection to check cross-face-errors (set of nodes of the edge on 1st face must be equal to set of nodes of the same edge on 2nd face).
Now end points of intervals calculated in GeomAdapter_Curve are not replaced by GeomAdapter_Surface.
Left bound of periodic curve less than UMin is not corrupted by LocateParameter during intervals calculating.
Implementation of capturing of output to standard streams in DRAW (see command dlog) is revised to avoid problems with command "test" executing long test scripts:
1. Method OSD_File::Capture() is removed: on Windows it was allocating a C file descriptor for a file opened using WinAPI, and never released that descriptor (once allocated, it cannot be released separately from WinAPI file handle). Direct calls to dup/dup2 are used instead.
2. In Draw_Window.cxx the standard Tcl channels are initialized manually using corrected version of Tcl internal function. This works around a problem with Tcl channels on Windows being bound to OS device handle owned by the system which can get invalidated as result of calls to dup2() (used to capture output to standard streams).
3. Temporary file for capturing is opened once and used to store whole log, thus the need to collect log in the string stream in memory is avoided
4. Possible errors of dup() and dup2() are checked and reported
Test demo draw dlog is added
Off-topic changes:
- Test demo draw getsource is corrected for VS2017 which generates file name in lowercase
- Field myFaceBounds is initialized in constructor of the class BRepAlgo_NormalProjection to avoid undefined behavior
- Test bugs modalg_5 bug24012 is corrected to use command nproject instead of custom one, and to check propertes of the resulting shape
Two new functionalities have been added in BRepFilletAPI_MakeChamfer:
- constant throat (the section of chamfer is isosceles triangle, its height is constant in all sections - this is the "throat" of the weld);
- constant throat with penetration(the section of chamfer is right-angled triangle, the first of two surfaces (where is the top of the chamfer) is virtually moved inside the solid by offset operation, the apex of the section is on the intersection curve between moved surface and second surface, right angle is at the top of the chamfer, the length of the leg from apex to top is constant - this is the "throat" of the weld).
- New abstract classes BlendFunc_GenChamfer and BlendFunc_GenChamfInv have been added;
- Class BlendFunc_Chamfer is now descended from BlendFunc_GenChamfer, class BlendFunc_ChamfInv is now descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroat is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatInv is descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroatWithPenetration is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatWithPenetrationInv is descended from BlendFunc_GenChamfInv.
- Class ChFi3d_ChBuilder has now mode of chamfer that can be ClassicChamfer, ConstThroatChamfer and ConstThroatWithPenetrationChamfer.
- Two new DRAW Test Harness commands "chamf_throat" ant "chamf_throat_with_penetration" have been added for the second mode of ChBuilder.
- The interface of DRAW Test Harness command "chamf" changed for symmetric case.
The reason of this problem is in wrong work of classifier algorithm (see the message ~0080992 to the issue #30354). Therefore, the algorithm of IntTools_FClass2d class has been improved. Namely, now orientation of the polygon is computed from area-criterion instead of angle. As result, some simplification of the method IntTools_FClass2d::Init(...) has been made.
<!break>
1. New constructor has been added to the class CSLib_Class2d. It allows applying TColgp_SequenceOfPnt2d.
2. DRAW-commands "addpolygonnode" and "polygonprops" have been created. They are covered by the test case "tests/geometry/2dpolygon/A1".
3. New method Poly::PolygonProperties(...) has been created. See help for detailed information.
4. New testgrid "lowalgos classifier" has been created.
Split seam edge of a cone according to the specified parameters.
Seam edge functor is called before check of triangulation consistency in order to keep face status consistent.
The cause is that split seam edge can set Outdated flag when Reused is set by another functor without reset which can lead to refusement of such face by triangulation procedure.
Fix compilation error on VS2008
The misprint leading to the problems was fixed.
"Draw" tests were created to check the fix.
"Draw" test bugs/modalg_7/bug28784 was corrected
for right changes of the results.
In fact, the DRAW-command "mesh" is duplicate of "incmesh".
The difference is that the "mesh" creates DRAW-object MeshTest_DrawableMesh. However, this object is currently not applicable (e.g. we cannot display it).
DRAW-commands "mesh", "addshape", "smooth", "edges", "vertices", "medge", "mvertex", "triangle", "dumpvertex", "dumpedge", "dumptriangle" and "onetriangulation" have been removed.
The class MeshTest_DrawableMesh has been removed as useless.
Testgrids "mesh standard_mesh" and "mesh advanced_mesh" have been removed.
1. Check whether the mesh satisfies the required angular deflection has been amended. Namely normals (to the surface) in the ends of any not "frontier" link are made collinear (with the given angular tolerance).
2. New parameters AngleInterior and DeflectionInterior have been added in IMeshTools_Parameters structure.
3. In case of thin long faces with internal edges, add points of internal edges to control parameters using grabParamsOfInternalEdges() in order to avoid aberrations on its ends. Disable addition of parameters from boundary edges in case of BSpline surface. Deviation can be controlled through the deflection parameter.
4. Grab parameters from edges in case if there is just a single interval on BSpline surface along U and V direction.
Removed tight connections between data structures, auxiliary tools and algorithms in order to create extensible solution, easy for maintenance and improvements;
Code is separated on several functional units responsible for specific operation for the sake of simplification of debugging and readability;
Introduced new data structures enabling possibility to manipulate discrete model of particular entity (edge, wire, face) in order to perform computations locally instead of processing an entire model.
The workflow of updated component can be divided on six parts:
* Creation of model data structure: source TopoDS_Shape passed to algorithm is analyzed and exploded on faces and edges. For each topological entity corresponding reflection is created in data model. Note that underlying algorithms use data model as input and access it via common interface which allows user to create custom data model with necessary dependencies between particular entities;
* Discretize edges 3D & 2D curves: 3D curve as well as associated set of 2D curves of each model edge is discretized in order to create coherent skeleton used as a base in faces meshing process. In case if some edge of source shape already contains polygonal data which suites specified parameters, it is extracted from shape and stored to the model as is. Each edge is processed separately, adjacency is not taken into account;
* Heal discrete model: source TopoDS_Shape can contain problems, such as open-wire or self-intersections, introduced during design, exchange or modification of model. In addition, some problems like self-intersections can be introduced by roughly discretized edges. This stage is responsible for analysis of discrete model in order to detect and repair faced problems or refuse model’s part for further processing in case if problem cannot be solved;
* Preprocess discrete model: defines actions specific for implemented approach to be performed before meshing of faces. By default, iterates over model faces and checks consistency of existing triangulations. Cleans topological faces and its adjacent edges from polygonal data in case of inconsistency or marks face of discrete model as not required for computation;
* Discretize faces: represents core part performing mesh generation for particular face based on 2D discrete data related to processing face. Caches polygonal data associated with face’s edges in data model for further processing and stores generated mesh to TopoDS_Face;
* Postprocess discrete model: defines actions specific for implemented approach to be performed after meshing of faces. By default, stores polygonal data obtained on previous stage to TopoDS_Edge objects of source model.
Component is now spread over IMeshData, IMeshTools, BRepMeshData and BRepMesh units.
<!break>
1. Extend "tricheck" DRAW-command in order to find degenerated triangles.
2. Class BRepMesh_FastDiscret::Parameters has been declared as deprecated.
3. NURBS range splitter: do not split intervals without necessity. Intervals are split only in case if it is impossible to compute normals directly on intervals.
4. Default value of IMeshTools_Parameters::MinSize has been changed. New value is equal to 0.1*Deflection.
5. Correction of test scripts:
1) perf mesh bug27119: requested deflection is increased from 1e-6 to 1e-5 to keep reasonable performance (but still reproducing original issue)
2) bugs mesh bug26692_1, 2: make snapshot of triangulation instead of wireframe (irrelevant)
Correction in upgrade guide.
