Boolean Operations - Force the face with internal edges to be treated by the BuilderFace algorithm. It is needed for the cases when internal edges of the face go from side to side and should really split the face.
Test case for the issue.
If 2D-curves are requested in intersection result but they cannot be created (by some reason) then the full set of curves (3D and two 2D) is rejected from the intersection result.
1. New testgrid "lowalgos/intss" has been created. It will contain all test cases on geometrical intersection of two surfaces ("intersect" DRAW-command) and two faces ("bopcurves" DRAW-command).
2. New test case for the issue #28493 has been created because the problem is not reproduced on MASTER.
3. Test case (lowalgos/intss/bug24472) for the issue #29501 has been modified in order to check loops of the resulting intersection curves.
Test cases have been created. No fix is needed because the described problem has not to be cause of failing of high-level OCCT-algorithms.
See the message ~80300 (issue #26509) for detail information.
Bnd_Box now keeps calculating of finite part of bounding box after specifying it to be Open in some direction.
The finite part can be retrieved using new method Bnd_Box::FinitePart().
Prs3d::GetDeflection() now uses Bnd_Box::FinitePart() when applying relative deflection.
Draw Harness command bounding has been extended with option -finite returing a finite part of AABB.
Special treatment of bspline curve of first degree is implemented in Extrema_GExtPC.gxx
Test case is added
Some test cases are modified according to actual state of algorithm
Graphic3d_Buffer can be now optionally initialized as non-interleaved array of vertex attributes
and provides an interface to invalidate buffer sub-range tracked by OpenGl_PrimitiveArray.
Replacing usage of BRepAlgo_DSAccess with usage of modern Boolean operations algorithms in BRepFill_Draft.
Removing BRepAlgo_BooleanOperations and BRepAlgo_DSAccess classes.
The following classes have been removed as unused:
* BRepAlgo_DataMapOfShapeBoolean
* BRepAlgo_DataMapOfShapeInterference
* BRepAlgo_EdgeConnector
* BRepAlgo_SequenceOfSequenceOfInteger
SelectMgr_SelectableObject now assigns transformation to mySelectionPrs and myHilightPrs presentations.
Removed confusing method PrsMgr_PresentableObject::UpdateTransformation() with presentation as argument.
When refining the mesh to achieve required deflection (IntPolyh_Triangle::MultipleMiddleRefinement) limit the number of new triangles to avoid infinite loop.
Test case for the issue.
Implemented workaround for dump images with width >= 5462 pix on Intel OpenGl driver.
Changes according to OpenGl_Context::myVendor field in lowercase.
Now roots-references in XCAF Document can be exported to STEP without losing structure of assembly/sharing/metadata of this root. New auxiliary root assembly with each root-reference is created to save all necessary data.
Provide possibility to perform Boolean operations on open solids.
Implementation of the new method *BOPAlgo_Builder::BuildBOP* performing the construction of the result shape for the given type of Boolean operation.
This approach does not rely on the splits of solid to be correct and looks for the faces with necessary state relatively opposite solids to build the result solid.
The call to this method is performed from BOP algorithm in case there were open solids in the arguments.
Implementation of the draw command *buildbop* performing a call to the method above.
Do not allow the precision with which the valid range is found to be less than the epsilon of the max parameter of the edge's range.
Test cases for the issue.
Add history for subshapes of spine: edges and vertices. Each edge of spine generates a shell. Each vertex of spine generates a set of edges and, possibly, faces (in the case of Round Corner).
StdPrs_ToolRFace no skips curves with NULL curves.
Code has been cleaned up from duplicated checks, redundant casts
and dummy Adaptor2d_Curve2dPtr typedef.
StdSelect_BRepSelectionTool::GetSensitiveForFace() now catches
Standard_NullObject exception to skip invalid Edges.
The following improvements have been made in Boolean operations algorithm in order to fix the problem:
1. Initialization of the pave blocks which vertices have acquired the SD ones.
2. Removing from Data Structure the small edges having the same vertices on both ends (either initially or acquired).
3. Avoid adding empty SD connections when one vertex points to itself.
Test case for the issue.
BRepLib::ExtendFace method when working with analytical and periodic faces now takes into account the possible closeness of the result face.
Test cases for the issue.
1. The condition of WLine breaking (in IntWalk_IWalking algorithm) has become more independent of the input tolerance.
2. Currently the algorithm of IntPatch_Points of WLine processing depends on the algorithm of obtaining the WLine.
3. The methods IntSurf_LineOn2S::Add(...) and IntSurf_LineOn2S::SetUV(...) have become not inline (see the message ~0077431 in the issue #29866).
Detection of specific case of error in the definition of transformation matrix describing position of the component within assembly, when it has Axis Placements swapped, is corrected to handle the case when one of these Axis Placements is contained in both Shape Representations (of the assembly and its component).
This allows the problematic STEP file to be translated correctly.
Added test bugs step bug30087
BOPTools_AlgoTools::ComputeState - increase the chance of correct classification of the face relatively solid by classifying the point located inside that face instead of the point taken near the edge of that face.
Test case for the issue.
Extended SelectBasics_PickResult structure by myObjPickedPnt field, which contained the value of the 3d point on the selected object.
Changed all Overlaps methods. Parameter theDepth replaced on object of the structure SelectBasics_PickResult. This approach will be able to add new fields to SelectBasics_PickResult structure without big changes in modules which contained Overlaps method.
Methods GeomConvert::ConcatG1, GeomConvert::ConcatC1, Geom2dConvert::ConcatG1, Geom2dConvert::ConcatC1 are corrected to prevent exceeding maximum degree of BSpline curve in case of closed contour.
