Messages are registered in ShapeExtend_MsgRegistrator added to ShapeCutom and ShapeUpgrade packages
All operators of ShapeProcess_OperLibrary are instrumented with MsgRegistrator
0025520: To provide info on what has been done by Shape Process and Shape Fix
Update SHAPE.fr
Fix some messages (minor change)
New parameter MinSize has been introduced to BRepMesh and GCPnts_TangentialDeflection;
Check length of remaining part of curve for min size parameter instead of distance between two points to avoid large gaps in case highly distorted BSpline surfaces;
Produce fine mesh for sphere and fix other surface;
Test cases for issue CR25378
Correction of test cases for issue CR25378
New features:
1. class BRepCheck_Solid
The class is to check a solid per se.
The scan area is:
i. Shells that overlaps each other
Status: BRepCheck_InvalidImbricationOfShells
ii. Detached parts of the solid (vertices, edges)
that have non-internal orientation
Status: BRepCheck_BadOrientationOfSubshape
iii. For closed, non-internal shells:
iii.1 Shells containing entities of the solid that
are outside towards the shells
Status: BRepCheck_SubshapeNotInShape
iii.2 Shells that encloses other Shells
(for non-holes)
Status: BRepCheck_EnclosedRegion
Changes:
1. enumeration BRepCheck_Status
members:
InvalidImbricationOfShells,
EnclosedRegion,
has been added
2. class BRepCheck
method:
void BRepCheck::Print(const BRepCheck_Status stat,
Standard_OStream& OS)
has been modified to take into account II.1
3. class BRepCheck_Analyzer
method:
void BRepCheck_Analyzer::Put(const TopoDS_Shape& S,
const Standard_Boolean B)
has been modified to take into account I.1
4. class BRepTest
function:
void StructuralDump(Draw_Interpretor& theCommands,
const BRepCheck_Analyzer &theAna,
const Standard_CString ShName,
const Standard_CString Pref,
const TopoDS_Shape &theShape)
has been modified to take into account I.1, II.1
Test cases for issue CR25509
Correction of test cases for issue CR25509
Usage of QAGetPixelColor were checked and corrected.
Using simple comparison instead of regexp.
Improved usage of command vreadpixel for standard colors.
Command QAGetPixelColor was dropped from TKQADraw.
Procedures "checkcolor" and auxiliary "checkpoint" were moved to DrawResources/TestCommands.tcl
Some test cases using "checkcolor" for picking line color were simplified.
Procedures checkcolor and checkpoint were changed to handle situation when pixel is out of view.
Removed unnecessary use of command "vaspects -setwidth" in tests.
Revert -setwidth change in test bugs/vis/bug23525
-Set algorithm flag NotDone if there is a non-degenerated edge with absent 3D curve.
-Check IsDone flag in thrusection command.
-Add test case bugs/modalg_5/bug25568.
Small correction of test case for issue CR25568
Sometimes curve or surface, which is defined as C0, has continuity G1 or above. Offset can be built from these shapes.
Therefore, this extended checking was added into SetBasisCurve and SetBasisSurface methods.
Main changes in function BRepOffset_Tool::ExtentFace(...):
* "return" is added if intersection (in 2D-space) between two edges in a face cannot be found.
Basis curve/surface continuity value found (if G1-checking is OK) is set up as BasisContinuity (see myBasisCurveContinuity and myBasisSurfContinuity members which is returned by GetBasisCurveContinuity and GetBasisSurfContinuity() methods). This fact is used in Geom2dAdaptor and in GeomAdaptor classes.
Possibility is entered, which allows for basis elements of offset curve/surface to avoid of C0-checking.
Test cases were changed according to their new behavior.
Test-cases for issue #25124
Compute parameters to produce regular grid and add new internal points according to calculated values.
Use intervals as an additional parameters to determine regular grid for BSpline surfaces.
Test case for issue CR25519
Correction of test case for issue CR25519
Correction of test cases for issue CR25519
Implemented additional verification that the point found by Extrema is placed inside the face. This way turns off searching the additional inner point.
Test case for issue CR25555
Image_PixMap::ImgFormat - extend enumeration by ImgAlpha and ImgAlphaF.
OpenGl_Workspace::setTextureParams() - specify GL_REPLACE for 1-component textures with disabled modulation.
OpenGl_Texture::GetDataFormat() - return GL_LUMINANCE format for ImgGray format and GL_ALPHA for ImgAlpha.
vmarkerstest - override pixel format for grayscale images to ImgAlpha.
Add test case bugs/vis/bug25544_graytexture.
Writing of colors to IGES Face (510) and Solid (186) entities allowed since this is used by CAD systems (even if not allowed by IGES standard).
Color assigned to surface, face and solid entities to ensure that different CAD systems will recognize them.
Test-case for issue #25518
Modified command cpulimit using OSD_Timer and method ElapsedTime()
Enabled elapsed time control on Linux.
Added resetting of elapsed timer.
Unused variables were removed
Definition of OSD_Timer aTimer was replaced.
Correction of thread terminating on linux.
Wrong border 1.0e-9 jump has deleted. Added periodicity information when projecting to surface.
Period "jump" bug fixes.
AppCont_LeastSquare conversion to non cdl class.
AppCont_Function + AppCont_FunctionTool combined in one class providing the same functionality and converted to non cdl.
Testcase modification.
Test cases for issue CR24988
Fixed incorrect comparison.
Option to link to MS run-time library statically added in description of building of Tcl/Tk from sources
Spelling corrections
Order of sections corrected in "Debug tools and hints"
AIS_LocalContext::Remove() corrected to unbind the argument from
myActiveObjects at the very end. Also some code clean up applied
(e.g. duplicated AddOrRemoveSelected() call removed, formatting corrected).
code formatting
Implementation of Fuzzy Boolean operations. Such operations allow to perform Boolean operations on the shapes
with near-coincidence between the entities of these shapes, i.e. between shapes in which some entities from one shape
are intended to be coincide with some entities from the other, but the coincidence is not precise.
API for Boolean operations has been improved to have a possibility to add new options.
Modified entities:
1. New option of setting additional tolerance have been added to the following classes:
class BOPAlgo_ArgumentAnalyzer
class BOPAlgo_BOP
class BOPAlgo_Builder
class BOPAlgo_MakerVolume
class BOPAlgo_PaveFiller
class BOPDS_DS
class BRepAlgoAPI_BooleanOperation
class BRepAlgoAPI_Check
class BRepAlgoAPI_Common
class BRepAlgoAPI_Cut
class BRepAlgoAPI_Fuse
class BRepAlgoAPI_Section
2. Following draw commands have been modified to support new functionality:
BOP commands:
bop b1 b2 [tol]
bcommon r b1 b2 [tol]
bcut r b1 b2 [tol]
bfuse r b1 b2 [tol]
bsection r s1 s2 [-n2d/-n2d1/-n2d2] [-na] [tol]
mkvolume r b1 b2 ... [-c] [-ni] [-s] [tol]
bfillds [-s -t] [tol]
Check commands:
bopcheck Shape [level of check: 0 - 9] [-t -s] [-tol tol]
bopargcheck [-F/O/C/T/S/U] [/R|F|T|V|E|I|P|C|S]] [#BF] [-tol tol]
3. Two new classes have been added to API to provide the root interface for algorithms
class BRepAlgoAPI_Algo
class BRepAlgoAPI_BuilderAlgo
Fix to eliminate the warning.
Test-cases for issue #25477
