Interpolation state check is fixed to mark as valid only ordered sequences of poles.
Refactoring of Approx_SameParameter.cxx.
Test case is added.
Test cases are updated to the new behavior.
Update of testing cases
1) Reduce the number of calls to malloc by grouping requests to larger blocks. To achieve this goal, the following ways are used:
- Containers of types sequence, list and map are initialized with an instance of NCollection_IncAllocator, at this taking care of the time of life of allocated objects, so that not to occupy huge amount of memory.
- Allocation of several arrays having the same and short life time is changed so that to allocate a buffer array of necessary size and to place arrays in this buffer.
2) In BRepMesh_FastDiscretFace, optimize the function filterParameters so that to avoid excess memory allocations.
3) In NCollection_CellFilter, change declaration of the method Reset to accept array by reference rather than by value.
4) Add Allocator() method in map, sequence and vector collection classes by analogy with list collection.
5) Correct the size of block for IncAllocator for x64 platform. In order free-ed block to be returned to the system its size should be at least 1024K on x64 and 512K on x86. This allows to retain free virtual space almost to the state before algorithm run.
6) Decrease amount of memory zeroed by calloc. For that, reduce theIncrement parameter of the embedded vectors of the classes NCollection_UBTreeFiller and BRepMesh_VertexInspector to default value 256.
7) Avoid computing bounding box when not necessary (if no relative deflection is used)
8) Cycles by wires of face using TopExp_Explorer are converted to use TopoDS_Iterator instead.
9) BRepMesh_FastDiscret::Add optimized to avoid storing sequences of faces and edges
10) The tests "mesh standard_* W7" are corrected to accept the new behavior. Earlier the following error took place:
Not connected mesh inside face 9
{12 13}
Now this error was replaced with another one:
free nodes (in pairs: face / node):
{9 12}
Actually it is not a regression, rather improvement, if we look at the snapshot.
11) Change other test cases to their actual state.
Method BRepLib::EncodeRegularity() is improved to set regularity GeomAbs_CN for edges lying on the same-domain surfaces (where derivatives on both surfaces are equal in all points).
DRAW command getedgeregularity is added to query regularity of the edge on specified faces.
DRAW command edgeregul is removed (this functionality is provided by command encoderegularity).
Added tests: bugs modalg_6 bug27272, bug27383_1, bug27383_2
Correction of shape name in test case for issue CR27272
This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Code corrected to avoid ambiguous situations due to changed implementation of Handle (overloaded methods accepting handles of different types).
In Adaptor3d_CurveOnSurface added method Load() with two parameters, allowing to avoid ambiguity of cast of handles when calling separate methods Load() for curve and surface, replacing by single call.
In DrawTrSurf and IGESData_IGESWriter, template variants of methods Set() and Send(), respectively, are added to avoid ambiguity when these methods are called with handles to derived types (using SFINAE).
In NCollection_DefineHSequence, method Append() accepting handle to another HSequence is made template, to be available only if argument has compatible type.
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
1. Develop special sewing algorithm.
2. DRAW-command "fastsewing" has been created (see help for detail information).
3. BRepLib::EnsureNormalConsistency() method has been added (see help for detail information).
4. DRAW-command correctnormals has been created (see help for detail information).
Test cases for this issue.
Correction of elapsed time in test-cases
Updated test-cases from branch CR24255_3
0024255: Regressions in test cases on OCCT vc9 win64 Release
Small refactoring.
Fix for CASE bugs modalg_5 bug25298_09: FAILED (error)
Test-cases correction (bugs modalg_5 bugs25804_1, bug25704_2)
1. Using of the "Closed" flag was unified:
a) this flag is applicable for TopoDS_Wire and TopoDS_Shell only, because these entities may hedge an area in 2D space or a volume in 3D space correspondingly;
b) other types of TopoDS shapes are passing over this flag;
c) changing of this flag should be controlled by high-level algorithms (not BRep_Builder).
2. Implemented verification of the closedness of edges. An edge is closed if and only if its first and last vertices are the same.
3. Test cases were changed according to new behavior.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
Main problem:
Algorithm of locale extrema, which is called by "sameparameter" command, cannot find extrema because extremal point is far from initial point. Therefore, reparametrization of edge's curve (for same-parameter) cannot be made properly.
Solve:
Using of global extrema (see Approx_SameParameter.cxx).
As the given edge contains two 2d-curves and the second from them is problem, for select needed curve, an interface of "mk2dcurve" DRAW-command is changed. Now there can be used an index of curve (by default, index = 1, as earlier), see help for more detail information.
Test "heal advanced Z3":
Now checkshape finds only two invalid subshapes. Earlier, it found four subshapes. I think it is not regression. Therefore, test case was changed.
Tolerance reducing.
test
