0029144: BOP PaveFiller hangs in some case

1. Method IntWalk_PWalking::ExtendLineInCommonZone(...) now is not called if the already found intersection point is on surface boundary. As result, the intersection line going along any boundary will never be extended. It is appropriate for high-level OCCT-algorithm because they will take the boundary (not computed line) as intersection result. 2. Method IntTools_BeanFaceIntersector::ComputeRangeFromStartPoint(...) has been corrected in order to avoid infinite loop described in the issue. The algorithm of obtaining the neighborhood of the intersection point has been improved. 3. Now, IsInside(...) static function (see BOPAlgo_BuilderFace.cxx file) does not need a 2D-curve for classified edge on the face. It allows avoiding exceptions in cases when the curve creation is impossible. 4. Post-processing has been added to join several common blocks to one. Method BOPDS_DS::RemoveCommonBlock(...) has been added in order to avoid duplication after joining.
2025-08-09 13:22:24 +03:00 · 2017-10-10 11:53:01 +03:00
7257 changed files with 120319 additions and 228498 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -1,10 +1,14 @@

 # standard directories for derived files in CASROOT
 /.adm
+/sun
 /lin
 /mac
+/ao1
+/sil
 /wnt
 /doc
+/drv
 /inc
 /work

@@ -31,8 +35,6 @@ Release
 *.suo
 *.sdf
 *.opensdf
-*.VC.db
-*.VC.opendb
 *.ipch
 *.aps

--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -32,6 +32,7 @@ if ("${BUILD_LIBRARY_TYPE}" STREQUAL "Shared")
  endif()
 else()
  unset (BUILD_SHARED_LIBS)
+  message (STATUS "Info: Only 3rdparty's header files are used for building of static OCCT libraries")
  unset (BUILD_SHARED_LIBRARY_NAME_POSTFIX)
 endif()

@@ -63,7 +64,7 @@ set (BUILD_RESOURCES OFF CACHE BOOL "${BUILD_RESOURCES_DESCR}")

 # single-configuration generator
 set (SINGLE_GENERATOR OFF)
-if (DEFINED CMAKE_BUILD_TYPE)
+if (CMAKE_BUILD_TYPE)
  set (SINGLE_GENERATOR ON)
 endif()

@@ -86,11 +87,6 @@ if (BUILD_WITH_DEBUG)
  set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS $<$<CONFIG:DEBUG>:OCCT_DEBUG>)
 endif()

-# option disabling OCCT exceptions in Release builds (No_Exception)
-if (NOT DEFINED BUILD_RELEASE_DISABLE_EXCEPTIONS)
-  set (BUILD_RELEASE_DISABLE_EXCEPTIONS ON CACHE BOOL "${BUILD_RELEASE_DISABLE_EXCEPTIONS_DESCR}")
-endif()
-
 # option to enable or disable use of precompiled headers
 if (NOT DEFINED BUILD_USE_PCH)
  set (BUILD_USE_PCH OFF CACHE BOOL "${BUILD_USE_PCH_DESCR}")
@@ -348,9 +344,8 @@ set (BUILD_ADDITIONAL_TOOLKITS "" CACHE STRING "${BUILD_ADDITIONAL_TOOLKITS_DESC
 separate_arguments (BUILD_ADDITIONAL_TOOLKITS)

 if (MSVC)
-  set (BUILD_SAMPLES_MFC OFF CACHE BOOL "${BUILD_SAMPLES_MFC_DESCR}")
+  set (BUILD_MODULE_MfcSamples OFF CACHE BOOL "${BUILD_MODULE_MfcSamples_DESCR}")
 endif()
-set (BUILD_SAMPLES_QT OFF CACHE BOOL "${BUILD_SAMPLES_QT_DESCR}")

 set (BUILD_Inspector OFF CACHE BOOL "${BUILD_Inspector_DESCR}")

@@ -386,7 +381,7 @@ endif()
 # include the patched or original list of modules
 # list <MODULENAME>_TOOLKITS is created foreach module and contains its toolkits
 # list <OCCT_MODULES> will contain all modules
-OCCT_MODULES_AND_TOOLKITS (MODULES "TOOLKITS" OCCT_MODULES)
+OCCT_MODULES_AND_TOOLKITS (OCCT_MODULES)

 foreach (OCCT_MODULE ${OCCT_MODULES})
  BUILD_MODULE (${OCCT_MODULE})
@@ -486,6 +481,7 @@ OCCT_IS_PRODUCT_REQUIRED (CSF_FreeImagePlus CAN_USE_FREEIMAGE)
 OCCT_IS_PRODUCT_REQUIRED (CSF_TclLibs USE_TCL)
 OCCT_IS_PRODUCT_REQUIRED (CSF_FREETYPE USE_FREETYPE)
 OCCT_IS_PRODUCT_REQUIRED (CSF_OpenGlLibs CAN_USE_GLES2)
+OCCT_IS_PRODUCT_REQUIRED (CSF_GL2PS CAN_USE_GL2PS)
 OCCT_IS_PRODUCT_REQUIRED (CSF_TBB CAN_USE_TBB)
 OCCT_IS_PRODUCT_REQUIRED (CSF_EIGEN CAN_USE_EIGEN)

@@ -587,7 +583,7 @@ else()
 endif()

 # OpenGL ES 2.0
-if (CAN_USE_GLES2)
+if (WIN32 AND CAN_USE_GLES2)
  if ("${CMAKE_SYSTEM_NAME}" STREQUAL "WindowsStore")
    set (USE_GLES2 ON)
  else()
@@ -613,6 +609,24 @@ else()
  OCCT_CHECK_AND_UNSET ("INSTALL_GLES2")
 endif()

+# GL2PS
+if (NOT DEFINED ANDROID AND CAN_USE_GL2PS)
+  set (USE_GL2PS OFF CACHE BOOL "${USE_GL2PS_DESCR}")
+
+  if (USE_GL2PS)
+    add_definitions (-DHAVE_GL2PS)
+    OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/gl2ps")
+  else()
+    OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_GL2PS")
+    OCCT_CHECK_AND_UNSET ("INSTALL_GL2PS")
+  endif()
+else()
+  OCCT_CHECK_AND_UNSET ("USE_GL2PS")
+
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_GL2PS")
+  OCCT_CHECK_AND_UNSET ("INSTALL_GL2PS")
+endif()
+
 # TBB
 if (NOT DEFINED ANDROID AND CAN_USE_TBB)
  set (USE_TBB OFF CACHE BOOL "${USE_TBB_DESCR}")
@@ -633,26 +647,6 @@ else()
  OCCT_CHECK_AND_UNSET ("INSTALL_TBB")
 endif()

-# RapidJSON
-# search for CSF_RapidJSON variable in EXTERNLIB of each being used toolkit
-OCCT_IS_PRODUCT_REQUIRED (CSF_RapidJSON CAN_USE_RAPIDJSON)
-if (CAN_USE_RAPIDJSON)
-  set (USE_RAPIDJSON OFF CACHE BOOL "${USE_RAPIDJSON_DESCR}")
-
-  if (USE_RAPIDJSON)
-    add_definitions (-DHAVE_RAPIDJSON)
-    OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/rapidjson")
-  else()
-    OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_RAPIDJSON")
-    OCCT_CHECK_AND_UNSET ("INSTALL_RAPIDJSON")
-  endif()
-else()
-  OCCT_CHECK_AND_UNSET ("USE_RAPIDJSON")
-
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_RAPIDJSON")
-  OCCT_CHECK_AND_UNSET ("INSTALL_RAPIDJSON")
-endif()
-
 # EIGEN
 if (CAN_USE_EIGEN)
  set (USE_EIGEN OFF CACHE BOOL "${USE_EIGEN_DESCR}")
@@ -708,22 +702,11 @@ else()
  OCCT_CHECK_AND_UNSET ("3RDPARTY_FLEX_EXECUTABLE")
 endif()

-# qt for inspector and samples
-if (BUILD_Inspector OR BUILD_SAMPLES_QT)
-  # check qt 3rdparty path
-  add_definitions (-DHAVE_QT)
-  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt")
-  message (STATUS "Info: Qt is used by OCCT")
-else()
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_QT")
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_TQTMALLOC")
-  OCCT_CHECK_AND_UNSET ("INSTALL_QT")
-endif()
-
-# check all 3rdparty include paths
 string (REGEX REPLACE ";" " " 3RDPARTY_NOT_INCLUDED "${3RDPARTY_NOT_INCLUDED}")
+
+# check all 3rdparty paths
 if (3RDPARTY_NOT_INCLUDED)
-  message (FATAL_ERROR "Could not find headers of used third-party products: ${3RDPARTY_NOT_INCLUDED}" )
+  message (FATAL_ERROR "NOT FOUND: ${3RDPARTY_NOT_INCLUDED}" )
 endif()

 if (3RDPARTY_INCLUDE_DIRS)
@@ -736,28 +719,13 @@ endif()
 # include <cmake binary folder>/inc
 include_directories (${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE})

-# check all 3rdparty library paths
-string (REGEX REPLACE ";" " " 3RDPARTY_NO_LIBS "${3RDPARTY_NO_LIBS}")
-if (3RDPARTY_NO_LIBS)
-  if (BUILD_SHARED_LIBS)
-    message (SEND_ERROR "Could not find libraries of used third-party products: ${3RDPARTY_NO_LIBS}" )
-  else()
-    message (WARNING "Could not find libraries of used third-party products: ${3RDPARTY_NO_LIBS}" )
-  endif()
-endif()
-if (3RDPARTY_LIBRARY_DIRS)
+if (3RDPARTY_LIBRARY_DIRS AND BUILD_SHARED_LIBS)
  list (REMOVE_DUPLICATES 3RDPARTY_LIBRARY_DIRS)
  string (REGEX REPLACE ";" "\n\t" 3RDPARTY_LIBRARY_DIRS_WITH_ENDS "${3RDPARTY_LIBRARY_DIRS}")
  message (STATUS "Info: The directories of 3rdparty libraries: \n\t${3RDPARTY_LIBRARY_DIRS_WITH_ENDS}")
  link_directories (${3RDPARTY_LIBRARY_DIRS})
 endif()

-# report not found 3rdparty dll paths
-string (REGEX REPLACE ";" " " 3RDPARTY_NO_DLLS "${3RDPARTY_NO_DLLS}")
-if (3RDPARTY_NO_DLLS)
-  message (WARNING "Could not find DLLs of used third-party products: ${3RDPARTY_NO_DLLS}" )
-endif()
-
 # build directories
 if (SINGLE_GENERATOR)
  set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib${BIN_LETTER}")
@@ -811,18 +779,26 @@ endif()
 # include the patched or original list of tools
 # list <TOOLNAME>_TOOLKITS is created foreach tool and contains its toolkits
 # list <OCCT_TOOLS> will contain all tools
-if (BUILD_Inspector)
-  add_definitions (-DHAVE_Inspector)
-
-  OCCT_MODULES_AND_TOOLKITS (TOOLS "TOOL_TOOLKITS" OCCT_TOOLS)
+if (NOT BUILD_Inspector)
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_QT")
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_TQTMALLOC")
+  OCCT_CHECK_AND_UNSET ("INSTALL_QT")
+else()
+  OCCT_TOOLS_AND_TOOLKITS (OCCT_TOOLS)
  foreach (OCCT_TOOL ${OCCT_TOOLS})
    list (APPEND BUILD_TOOL_TOOLKITS ${${OCCT_TOOL}_TOOL_TOOLKITS})
  endforeach()

-  # collect all the headers to <binary dir>/inc/inspector folder
+  # collect all the headers to <binary dir>/inc folder
  string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-  message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/inc/inspector ...")
+  message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/tools/inc ...")
  COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOL_TOOLKITS}" "${CMAKE_SOURCE_DIR}/tools" "${INSTALL_DIR_INCLUDE}/inspector")
+
+
+  # check qt 3rdparty path
+  add_definitions (-DHAVE_QT)
+  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt")
+  message (STATUS "Info: Qt is used by OCCT")
 endif()

 # OCCT samples
@@ -920,24 +896,16 @@ OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${S
 # write current custom.bat/sh (for build directory)
 OCCT_CONFIGURE ("adm/templates/custom.build.${SCRIPT_EXT}.in" "${SUB_CUSTOM_NAME}")

-if (BUILD_SAMPLES_MFC OR BUILD_SAMPLES_QT)
-  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
-  OCCT_COPY_FILE_OR_DIR    ("adm/templates/sample.${SCRIPT_EXT}" "${CMAKE_BINARY_DIR}")
+if (BUILD_MODULE_MfcSamples)
+  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.bat" "${INSTALL_DIR_SCRIPT}")
+  OCCT_COPY_FILE_OR_DIR    ("adm/templates/sample.bat" "${CMAKE_BINARY_DIR}")
 endif()

-if (WIN32)
-  # env script for draw in building environment
-  OCCT_CONFIGURE ("adm/templates/env.${SCRIPT_EXT}.in" "env.${SCRIPT_EXT}")
-  # install env script
-  install (FILES "${CMAKE_BINARY_DIR}/env.${SCRIPT_EXT}" DESTINATION "${INSTALL_DIR_SCRIPT}")
-else()
-  set (SUB_ENV_NAME "env.${SCRIPT_EXT}")
-  set (SUB_ENV_BUILD_NAME "env.install.${SCRIPT_EXT}")
-  # install env script
-  OCCT_CONFIGURE_AND_INSTALL ("adm/templates/env.install.${SCRIPT_EXT}.in" "${SUB_ENV_BUILD_NAME}" "${SUB_ENV_NAME}" "${INSTALL_DIR_SCRIPT}")
-  # env script for draw in building environment
-  OCCT_CONFIGURE ("adm/templates/env.build.${SCRIPT_EXT}.in" "env.${SCRIPT_EXT}")
-endif()
+# env script for draw in building environment
+OCCT_CONFIGURE ("adm/templates/env.${SCRIPT_EXT}.in" "env.${SCRIPT_EXT}")
+
+# install env script
+install (FILES "${CMAKE_BINARY_DIR}/env.${SCRIPT_EXT}" DESTINATION "${INSTALL_DIR_SCRIPT}")

 # copy DrawAppliInit from OCCT source to build directory
 if (NOT EXISTS "${CMAKE_BINARY_DIR}/DrawAppliInit")
@@ -956,15 +924,6 @@ foreach(RESOURCE ${RESOURCES})
  endif()
 endforeach()

-if (BUILD_SAMPLES_QT)
-  FILE_TO_LIST ("adm/SAMPLES_RESOURCES" SAMPLES_RESOURCES)
-  foreach(RESOURCE ${SAMPLES_RESOURCES})
-    OCCT_INSTALL_FILE_OR_DIR ("samples/${RESOURCE}" "${INSTALL_DIR_RESOURCE}/samples")
-    #message("Copy Sample resources: samples/${RESOURCE} into ${INSTALL_DIR_RESOURCE}/samples")
-  endforeach()
-endif()
-
-
 # patch installed DrawDefault file if BUILD_SHARED_LIBRARY_NAME_POSTFIX is changed
 if (NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
  OCCT_UPDATE_DRAW_DEFAULT_FILE()
@@ -1009,11 +968,9 @@ endif()

 message (STATUS "Info: \(${CURRENT_TIME}\) OCCT toolkits processed")
 # samples do not support patch usage
-if (BUILD_SAMPLES_MFC OR BUILD_SAMPLES_QT)
+if (BUILD_MODULE_MfcSamples)
  set (OCCT_ROOT ${CMAKE_SOURCE_DIR})
-endif()

-if (BUILD_SAMPLES_MFC)
  set (MFC_STANDARD_SAMPLES_DIR ${OCCT_ROOT}/samples/mfc/standard)
  set (COMMON_WINMAIN_FILE      ${MFC_STANDARD_SAMPLES_DIR}/Common/Winmain.cpp)

@@ -1032,33 +989,6 @@ if (BUILD_SAMPLES_MFC)
  message (STATUS "Info: \(${CURRENT_TIME}\) MFC Sample projects added")
 endif()

-OCCT_MODULES_AND_TOOLKITS (SAMPLES "SAMPLES_TOOLKITS" OCCT_SAMPLES)
-
-if (BUILD_Inspector OR BUILD_SAMPLES_QT)
-  if (BUILD_SAMPLES_QT)
-    if (NOT Qt5_FOUND OR "${Qt5Gui_EGL_INCLUDE_DIRS}" STREQUAL "" OR NOT WIN32)
-      list (REMOVE_ITEM qt_SAMPLES_TOOLKITS AndroidQt)
-      message (STATUS "Info: AndroidQt sample excluded due to OS is not Windows or Qt is configured without ANGLE")
-    endif()
-  else()
-    list (REMOVE_ITEM OCCT_SAMPLES qt)
-    message (STATUS "Info: qt samples excluded due to BUILD_SAMPLES_QT is disabled")
-  endif()
-
-  foreach (OCCT_SAMPLE ${OCCT_SAMPLES})
-    list (APPEND BUILD_SAMPLE_TOOLKITS ${${OCCT_SAMPLE}_SAMPLES_TOOLKITS})
-
-    # collect all the headers to <binary dir>/inc/samples folder
-    string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-    message (STATUS "Info: \(${CURRENT_TIME}\) ${OCCT_SAMPLE} Sample projects added")
-
-    # include patched toolkit projects or original ones
-    foreach (BUILD_SAMPLE_TOOLKIT ${${OCCT_SAMPLE}_SAMPLES_TOOLKITS})
-      OCCT_ADD_SUBDIRECTORY ("samples/${OCCT_SAMPLE}/${BUILD_SAMPLE_TOOLKIT}")
-    endforeach()
-  endforeach()
-endif()
-
 if (BUILD_MODULE_UwpSample)
  add_subdirectory(samples/xaml)
 endif()
@@ -1073,9 +1003,13 @@ if (BUILD_TOOL_TOOLKITS)
            PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
  endif()

-  set (OpenCASCADE_BINARY_DIR "${INSTALL_DIR}/${INSTALL_DIR_BIN}")
+  set (BUILD_SAMPLE_TOOLKITS TInspectorEXE)
+  foreach (BUILD_SAMPLE_TOOL_TOOLKIT ${BUILD_SAMPLE_TOOLKITS})
+    OCCT_ADD_SUBDIRECTORY ("samples/tools/${BUILD_SAMPLE_TOOL_TOOLKIT}")
+  endforeach()
+
  # patch TInspectorEXE
-  OCCT_CONFIGURE ("adm/templates/TInspectorEXE.vcxproj.user.in" "${CMAKE_BINARY_DIR}/tools/TInspectorEXE/TInspectorEXE.vcxproj.user")
+  OCCT_CONFIGURE ("adm/templates/TInspectorEXE.vcxproj.user.in" "${CMAKE_BINARY_DIR}/samples/tools/TInspectorEXE/TInspectorEXE.vcxproj.user")
 endif()

 # Prepare variables for configuration of OpenCASCADE cmake config file
@@ -1161,6 +1095,10 @@ if (APPLE)
  set (SET_OpenCASCADE_WITH_GLX "set (OpenCASCADE_WITH_GLX       ${USE_GLX})")
 endif()

+if (NOT SINGLE_GENERATOR)
+  OCCT_INSERT_CODE_FOR_TARGET()
+endif()
+
 # Configure and install cmake config file
 configure_file("${CMAKE_SOURCE_DIR}/adm/templates/OpenCASCADEConfig.cmake.in" "OpenCASCADEConfig.cmake" @ONLY)
 install(FILES "${CMAKE_BINARY_DIR}/OpenCASCADEConfig.cmake" DESTINATION  "${INSTALL_DIR_CMAKE}")
--- a/adm/.gitignore
+++ b/adm/.gitignore
@@ -1 +0,0 @@
-/build-*
--- a/adm/CMPLRS
+++ b/adm/CMPLRS
@@ -1,17 +1,17 @@
 wnt WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)
 lin WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)

-wnt cmplrs_cxx f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_cxx b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_cxx f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_cxx b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
 wnt cmplrs_cxx Aspect (wnt cmplrs_cxx b) -D_AFXDLL
 wnt cmplrs_cxx (wnt cmplrs_cxx b) -D_AFXDLL -D_AFXDLL

-wnt cmplrs_c f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_c b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_c f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_c b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
 wnt cmplrs_c NIS (wnt cmplrs_c b) -DSILGL -DSILGL_VRS=50

-lin cmplrs_cxx f -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-lin cmplrs_cxx b -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+lin cmplrs_cxx f -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+lin cmplrs_cxx b -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL

 lin cmplrs_c f -D_GNU_SOURCE=1 -fexceptions
 lin cmplrs_c b -D_GNU_SOURCE=1 -fexceptions
--- a/adm/MODULES
+++ b/adm/MODULES
@@ -3,5 +3,5 @@ ModelingData TKG2d TKG3d TKGeomBase TKBRep
 ModelingAlgorithms TKGeomAlgo TKTopAlgo TKPrim TKBO TKBool TKHLR TKFillet TKOffset TKFeat TKMesh TKXMesh TKShHealing
 Visualization TKService TKV3d TKOpenGl TKMeshVS TKIVtk TKD3DHost
 ApplicationFramework TKCDF TKLCAF TKCAF TKBinL TKXmlL TKBin TKXml TKStdL TKStd TKTObj TKBinTObj TKXmlTObj TKVCAF
-DataExchange TKXSBase TKSTEPBase TKSTEPAttr TKSTEP209 TKSTEP TKIGES TKXCAF TKXDEIGES TKXDESTEP TKSTL TKVRML TKXmlXCAF TKBinXCAF TKRWMesh
+DataExchange TKXSBase TKSTEPBase TKSTEPAttr TKSTEP209 TKSTEP TKIGES TKXCAF TKXDEIGES TKXDESTEP TKSTL TKVRML TKXmlXCAF TKBinXCAF
 Draw TKDraw TKTopTest TKViewerTest TKXSDRAW TKDCAF TKXDEDRAW TKTObjDRAW TKQADraw TKIVtkDraw DRAWEXE
--- a/adm/SAMPLES
+++ b/adm/SAMPLES
@@ -1 +0,0 @@
-qt AndroidQt FuncDemo IESample Tutorial
--- a/adm/SAMPLES_RESOURCES
+++ b/adm/SAMPLES_RESOURCES
@@ -1,2 +0,0 @@
-qt/Common/res/
-qt/Tutorial/res/
--- a/adm/TOOLS
+++ b/adm/TOOLS
@@ -1,4 +1,4 @@
 TModelingData TKShapeView
 TVisualization TKView TKVInspector
 TApplicationFramework TKTreeModel TKTInspectorAPI TKDFBrowser
-TTool TKTInspector TKToolsDraw TInspectorEXE
+TTool TKTInspector TKToolsDraw
--- a/adm/UDLIST
+++ b/adm/UDLIST
@@ -105,7 +105,6 @@ n BRepIntCurveSurface
 n BRepLib
 n BRepMAT2d
 n BRepMesh
-n BRepMeshData
 n BRepOffset
 n BRepOffsetAPI
 n BRepPrim
@@ -142,8 +141,6 @@ n HLRTopoBRep
 n HLRAppli
 n Hatch
 n HatchGen
-n IMeshData
-n IMeshTools
 n IntCurve
 n IntCurveSurface
 n IntCurvesFace
@@ -203,7 +200,6 @@ n Aspect
 n DsgPrs
 n Graphic3d
 n Image
-n Media
 n MeshVS
 n OpenGl
 n D3DHost
@@ -437,9 +433,4 @@ n IVtkDraw
 t TKIVtkDraw
 n Geom2dEvaluator
 t TKVCAF
-n XCAFView
-n XCAFNoteObjects
-t TKRWMesh
-n RWGltf
-n RWMesh
-n RWObj
+n XCAFView
--- a/adm/cmake/3rdparty_macro.cmake
+++ b/adm/cmake/3rdparty_macro.cmake
@@ -117,7 +117,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME

  foreach (LIBRARY_NAME ${${LIBRARY_CSF_NAME}})
    string (REPLACE "." "" LIBRARY_NAME_SUFFIX "${LIBRARY_NAME}")
-#    if (BUILD_SHARED_LIBS)
+    if (BUILD_SHARED_LIBS)
      # library
      if (NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}}")
        set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
@@ -133,7 +133,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
        # set 3RDPARTY_${PRODUCT_NAME}_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_LIBRARY
        set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} "3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}-NOTFOUND" CACHE FILEPATH "The path to ${PRODUCT_NAME} library \"${LIBRARY_NAME}\"" FORCE)

-        if ((3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}") OR (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME}}"))
+        if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
          find_library (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} NAMES ${LIBRARY_NAME}
                                                                                PATHS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME}}" "${3RDPARTY_${PRODUCT_NAME}_DIR}"
                                                                                PATH_SUFFIXES ${${PRODUCT_NAME}_PATH_SUFFIXES}
@@ -167,7 +167,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
      if (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX} AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX}}")
        list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX}}")
      else()
-        list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX})
+        list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX})

        set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} "" CACHE FILEPATH "The path to ${PRODUCT_NAME} library \"${LIBRARY_NAME}\"" FORCE)
      endif()
@@ -181,9 +181,9 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
          # set 3RDPARTY_${PRODUCT_NAME}_DLL as notfound, otherwise find_library can't assign a new value to 3RDPARTY_${PRODUCT_NAME}_DLL
          set (3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX} "3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX}-NOTFOUND" CACHE FILEPATH "The path to ${PRODUCT_NAME} shared library \"${LIBRARY_NAME}\"" FORCE)

-          if ((3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}") OR (3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME}}"))
+          if (3RDPARTY_${PRODUCT_NAME}_DIR AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_DIR}")
            find_library (3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX}  NAMES ${LIBRARY_NAME}
-                                                                               PATHS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME}}" "${3RDPARTY_${PRODUCT_NAME}_DIR}"
+                                                                               PATHS "${3RDPARTY_${PRODUCT_NAME}_DIR}"
                                                                               PATH_SUFFIXES bin  win${COMPILER_BITNESS}/${COMPILER}/bin
                                                                               NO_DEFAULT_PATH)
            if (3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX} STREQUAL "3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX}-NOTFOUND")
@@ -213,7 +213,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
        if (3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX} OR EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX}}")
          list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX}}")
        else()
-          list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX})
+          list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX})
        endif()
      endif()

@@ -277,6 +277,26 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
            endif()
          endif()

+          if("${PRODUCT_NAME}" STREQUAL "GL2PS")
+            get_filename_component(GL2PSLIB ${3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}} NAME)
+
+            if (SINGLE_GENERATOR)
+              install (FILES "${ABS_PATH}" DESTINATION "${INSTALL_DIR_LIB}" RENAME ${GL2PSLIB}.1)
+            else()
+              install (FILES "${ABS_PATH}"
+                       CONFIGURATIONS Release
+                       DESTINATION "${INSTALL_DIR_LIB}"
+                       RENAME ${GL2PSLIB}.1)
+              install (FILES "${ABS_PATH}"
+                       CONFIGURATIONS RelWithDebInfo
+                       DESTINATION "${INSTALL_DIR_LIB}i"
+                       RENAME ${GL2PSLIB}.1)
+              install (FILES "${ABS_PATH}"
+                       CONFIGURATIONS Debug
+                       DESTINATION "${INSTALL_DIR_LIB}d"
+                       RENAME ${GL2PSLIB}.1)
+            endif()
+          endif()
        endif()
      else()
        # the library directory for using by the executable
@@ -291,7 +311,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
      endif()

      mark_as_advanced (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} 3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX})
-#    endif()
+    endif()
  endforeach()
 endmacro()

--- a/adm/cmake/ffmpeg.cmake
+++ b/adm/cmake/ffmpeg.cmake
@@ -37,10 +37,6 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})
    set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}           "" CACHE PATH "The directory containing FFmpeg framework (${LIBRARY_NAME})")
  endif()

-  if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY_DIR)
-    set (3RDPARTY_FFMPEG_LIBRARY_DIR                           "" CACHE PATH "The directory containing FFmpeg libraries")
-  endif()
-
  if (WIN32)
    if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} OR NOT 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
      set (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}                 "" CACHE FILEPATH "FFmpeg shared libraries (${LIBRARY_NAME})" FORCE)
@@ -51,9 +47,6 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})
    if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
      set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}               "" CACHE PATH "The directory containing FFmpeg shared libraries (${LIBRARY_NAME})")
    endif()
-    if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_DIR)
-      set (3RDPARTY_FFMPEG_DLL_DIR                               "" CACHE PATH "The directory containing FFmpeg shared libraries")
-    endif()
  endif()

  # check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_${PRODUCT_NAME}_DIR
@@ -63,7 +56,6 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})

    if (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}")
      get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}" PATH)
-      set (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg libraries" FORCE)
      set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
    else()
      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} PATH "The directory containing FFmpeg library (${LIBRARY_NAME})")
@@ -74,7 +66,6 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})

      if (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}")
        get_filename_component (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" PATH)
-        set (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg shared libraries" FORCE)
        set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})" FORCE)
      else()
        CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})")
@@ -149,7 +140,7 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})
  if (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
  else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})

    set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} "" CACHE FILEPATH "The path to FFmpeg library (${LIBRARY_NAME})" FORCE)
  endif()
@@ -176,7 +167,7 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})
    if (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} OR EXISTS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
    else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
    endif()
  endif()

--- a/adm/cmake/freetype.cmake
+++ b/adm/cmake/freetype.cmake
@@ -61,8 +61,8 @@ endif()

 # check 3RDPARTY_FREETYPE_ paths for consistency with specified 3RDPARTY_FREETYPE_DIR
 if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
-  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build FILEPATH "The directory containing ft2build.h header")
-  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 FILEPATH "The directory containing ftheader.h header")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build FILEPATH "the path to ft2build.h")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 FILEPATH "the path to ftheader.h")
  if (BUILD_SHARED_LIBS)
    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR 3RDPARTY_FREETYPE_LIBRARY FILEPATH "the path to freetype library")

@@ -119,8 +119,8 @@ if (IS_BUILTIN_SEARCH_REQUIRED)

  # check the found paths for consistency with specified 3RDPARTY_FREETYPE_DIR
  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_ft2build FILEPATH "The directory containing ft2build.h header")
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_freetype2 FILEPATH "The directory containing ftheader.h header")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_ft2build FILEPATH "the path to ft2build.h")
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_INCLUDE_DIR_freetype2 FILEPATH "the path to ftheader.h")
    if (BUILD_SHARED_LIBS)
      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FREETYPE_DIR FREETYPE_LIBRARY FILEPATH "freetype library")
    endif()
@@ -129,13 +129,13 @@ if (IS_BUILTIN_SEARCH_REQUIRED)
  # assign the found paths to corresponding 3RDPARTY_FREETYPE_ variables
  if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build}")
    if (FREETYPE_INCLUDE_DIR_ft2build AND EXISTS "${FREETYPE_INCLUDE_DIR_ft2build}")
-      set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build  "${FREETYPE_INCLUDE_DIR_ft2build}" CACHE FILEPATH "The directory containing ft2build.h header" FORCE)
+      set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build  "${FREETYPE_INCLUDE_DIR_ft2build}" CACHE FILEPATH "the path to ft2build.h" FORCE)
    endif()
  endif()

  if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 OR NOT EXISTS "${3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2}")
    if (FREETYPE_INCLUDE_DIR_freetype2 AND EXISTS "${FREETYPE_INCLUDE_DIR_freetype2}")
-      set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2  "${FREETYPE_INCLUDE_DIR_freetype2}" CACHE FILEPATH "The directory containing ftheader.h header" FORCE)
+      set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2  "${FREETYPE_INCLUDE_DIR_freetype2}" CACHE FILEPATH "the path to ftheader.h" FORCE)
    endif()
  endif()

@@ -162,7 +162,7 @@ if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build OR NOT EXISTS "${3RDPARTY_FREETYP
  set (FT2BUILD_NAMES ft2build.h config/ft2build.h freetype/config/ft2build.h)

  # set 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build
-  set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build "3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build-NOTFOUND" CACHE FILEPATH "The directory containing ft2build.h header" FORCE)
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build "3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build-NOTFOUND" CACHE FILEPATH "the path to ft2build.h" FORCE)

  # cmake (version < 3.0) doesn't find ft2build.h of freetype (version is >= 2.5.1)
  # do search taking into account freetype structure of 2.5.1 version
@@ -185,7 +185,7 @@ if (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build AND EXISTS "${3RDPARTY_FREETYPE_INCLU
 else()
  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build)

-  set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build "" CACHE FILEPATH "The directory containing ft2build.h header" FORCE)
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_ft2build "" CACHE FILEPATH "the path to ft2build.h" FORCE)
 endif()

 # ftheader.h
@@ -193,7 +193,7 @@ if (NOT 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 OR NOT EXISTS "${3RDPARTY_FREETY
  set (FTHEADER_NAMES ftheader.h config/ftheader.h freetype/config/ftheader.h)

  # set 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2
-  set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2-NOTFOUND" CACHE FILEPATH "The directory containing ftheader.h header" FORCE)
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2-NOTFOUND" CACHE FILEPATH "the path to ftheader.h" FORCE)

  if (3RDPARTY_FREETYPE_DIR AND EXISTS "${3RDPARTY_FREETYPE_DIR}")
    find_path (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 NAMES ${FTHEADER_NAMES}
@@ -214,11 +214,11 @@ if (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 AND EXISTS "${3RDPARTY_FREETYPE_INCL
 else()
  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2)

-  set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "" CACHE FILEPATH "The directory containing ftheader.h header" FORCE)
+  set (3RDPARTY_FREETYPE_INCLUDE_DIR_freetype2 "" CACHE FILEPATH "the path to ftheader.h" FORCE)
 endif()

 # freetype library
-#if (BUILD_SHARED_LIBS)
+if (BUILD_SHARED_LIBS)
  if (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)

@@ -253,7 +253,7 @@ endif()
  if (3RDPARTY_FREETYPE_LIBRARY_DIR AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
  else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_FREETYPE_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_LIBRARY_DIR)

    set (3RDPARTY_FREETYPE_LIBRARY "" CACHE FILEPATH "The path to freetype library" FORCE)
  endif()
@@ -290,7 +290,7 @@ endif()
    if (3RDPARTY_FREETYPE_DLL_DIR OR EXISTS "${3RDPARTY_FREETYPE_DLL_DIR}")
      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FREETYPE_DLL_DIR}")
    else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_FREETYPE_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_DLL_DIR)
    endif()
  endif()

@@ -345,7 +345,7 @@ endif()
      set (USED_3RDPARTY_FREETYPE_DIR ${3RDPARTY_FREETYPE_LIBRARY_DIR})
    endif()
  endif()
-#endif()
+endif()

 # unset all redundant variables
 OCCT_CHECK_AND_UNSET(FREETYPE_INCLUDE_DIR_ft2build)
--- a/adm/cmake/gl2ps.cmake
+++ b/adm/cmake/gl2ps.cmake
@@ -0,0 +1,3 @@
+#GL2PS
+
+THIRDPARTY_PRODUCT("GL2PS" "gl2ps.h" "CSF_GL2PS" "d")
--- a/adm/cmake/occt_csf.cmake
+++ b/adm/cmake/occt_csf.cmake
@@ -58,50 +58,49 @@ if (USE_TCL)
  endif()
 endif()

+# GL2PS
+if (NOT DEFINED ANDROID)
+  if (USE_GL2PS)
+    set (CSF_GL2PS "gl2ps")
+  else()
+    set (CSF_GL2PS)
+  endif()
+endif()
+
 if (WIN32)
  set (CSF_advapi32      "advapi32.lib")
  set (CSF_gdi32         "gdi32.lib")
  set (CSF_user32        "user32.lib")
-  set (CSF_shell32       "shell32.lib")
  set (CSF_wsock32       "wsock32.lib")
-  set (CSF_psapi         "psapi.lib")
-  set (CSF_winmm         "winmm.lib")
-  set (CSF_d3d9          "D3D9.lib")
+  set (CSF_psapi         "Psapi.lib")
  if ("${CMAKE_SYSTEM_NAME}" STREQUAL "WindowsStore" OR USE_GLES2)
    set (CSF_OpenGlLibs  "libEGL libGLESv2")
  else()
    set (CSF_OpenGlLibs  "opengl32.lib")
  endif()

-else()
+  else()

  if (APPLE)
    set (CSF_objc        "objc")

    # frameworks
-    if (IOS)
-      find_library (Appkit_LIB NAMES UIKit)
-      set (CSF_Appkit ${Appkit_LIB})
-    else()
-      find_library (Appkit_LIB NAMES AppKit)
-      set (CSF_Appkit ${Appkit_LIB})
-    endif()
-    OCCT_CHECK_AND_UNSET (Appkit_LIB)
+    find_library (Appkit_LIB NAMES Appkit)
+    set (CSF_Appkit ${Appkit_LIB})

    find_library (IOKit_LIB NAMES IOKit)
    set (CSF_IOKit ${IOKit_LIB})
+
+    OCCT_CHECK_AND_UNSET (Appkit_LIB)
    OCCT_CHECK_AND_UNSET (IOKit_LIB)

-    if (IOS)
-      find_library (OpenGlLibs_LIB NAMES OpenGLES)
-      set (CSF_OpenGlLibs ${OpenGlLibs_LIB})
-      OCCT_CHECK_AND_UNSET (OpenGlLibs_LIB)
-    elseif (USE_GLX)
+    if (USE_GLX)
      set (CSF_OpenGlLibs GL)
      set (CSF_XwLibs     "X11 Xext Xmu Xi")
    else()
      find_library (OpenGlLibs_LIB NAMES OpenGL)
      set (CSF_OpenGlLibs ${OpenGlLibs_LIB})
+
      OCCT_CHECK_AND_UNSET (OpenGlLibs_LIB)
    endif()
    
@@ -110,13 +109,8 @@ else()
    set (CSF_OpenGlLibs  "EGL GLESv2")
  elseif (UNIX)
    set (CSF_ThreadLibs  "pthread rt stdc++")
-    if (USE_GLES2)
-      set (CSF_OpenGlLibs  "EGL GLESv2")
-    else()
-      set (CSF_OpenGlLibs  "GL")
-    endif()
+    set (CSF_OpenGlLibs  "GL")
    set (CSF_XwLibs      "X11 Xext Xmu Xi")
    set (CSF_dl          "dl")
-    set (CSF_fontconfig  "fontconfig")
  endif()
 endif()
--- a/adm/cmake/occt_defs_flags.cmake
+++ b/adm/cmake/occt_defs_flags.cmake
@@ -16,15 +16,16 @@ if (MSVC)
  set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   /fp:precise")
 endif()

-# add SSE2 option for old MSVC compilers (VS 2005 - 2010, 32 bit only)
+# set compiler short name and choose SSE2 option for appropriate MSVC compilers
+# ONLY for 32-bit
 if (NOT CMAKE_SIZEOF_VOID_P EQUAL 8)
-  if (MSVC AND ((MSVC_VERSION EQUAL 1400) OR (MSVC_VERSION EQUAL 1500) OR (MSVC_VERSION EQUAL 1600)))
+  if (MSVC80 OR MSVC90 OR MSVC10)
    set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:SSE2")
    set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   /arch:SSE2")
  endif()
 endif()

-if (MSVC)
+if (WIN32)
  add_definitions (-D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE)
 else()
  set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fexceptions -fPIC")
@@ -81,18 +82,13 @@ if (IS_DEBUG_C)
  string (REGEX REPLACE "-DDEBUG" "" CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG}")
 endif()
 # enable parallel compilation on MSVC 9 and above
-if (MSVC AND (MSVC_VERSION GREATER 1400))
+if (MSVC AND NOT MSVC70 AND NOT MSVC80)
  set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP")
 endif()

 # generate a single response file which enlist all of the object files
-if (NOT DEFINED CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS)
-  SET(CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS 1)
-endif()
-if (NOT DEFINED CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS)
-  SET(CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS 1)
-endif()
-
+SET(CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS 1)
+SET(CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS 1)
 # increase compiler warnings level (-W4 for MSVC, -Wextra for GCC)
 if (MSVC)
  if (CMAKE_CXX_FLAGS MATCHES "/W[0-4]")
@@ -143,7 +139,5 @@ if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX OR MINGW)
  set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -s")
 endif()

-if (BUILD_RELEASE_DISABLE_EXCEPTIONS)
-  set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -DNo_Exception")
-  set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DNo_Exception")
-endif()
+set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -DNo_Exception")
+set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DNo_Exception")
--- a/adm/cmake/occt_macros.cmake
+++ b/adm/cmake/occt_macros.cmake
@@ -60,27 +60,25 @@ endmacro()
 # COMPILER variable
 macro (OCCT_MAKE_COMPILER_SHORT_NAME)
  if (MSVC)
-    if ((MSVC_VERSION EQUAL 1300) OR (MSVC_VERSION EQUAL 1310))
+    if (MSVC70)
      set (COMPILER vc7)
-    elseif (MSVC_VERSION EQUAL 1400)
+    elseif (MSVC80)
      set (COMPILER vc8)
-    elseif (MSVC_VERSION EQUAL 1500)
+    elseif (MSVC90)
      set (COMPILER vc9)
-    elseif (MSVC_VERSION EQUAL 1600)
+    elseif (MSVC10)
      set (COMPILER vc10)
-    elseif (MSVC_VERSION EQUAL 1700)
+    elseif (MSVC11)
      set (COMPILER vc11)
-    elseif (MSVC_VERSION EQUAL 1800)
+    elseif (MSVC12)
      set (COMPILER vc12)
-    elseif (MSVC_VERSION EQUAL 1900)
+    elseif (MSVC14)
      set (COMPILER vc14)
-    elseif ((MSVC_VERSION GREATER 1900) AND (MSVC_VERSION LESS 2000))
+    elseif (MSVC15)
      # Since Visual Studio 15 (2017), its version diverged from version of
      # compiler which is 14.1; as that compiler uses the same run-time as 14.0,
      # we keep its id as "vc14" to be compatibille
      set (COMPILER vc14)
-    else()
-      message (FATAL_ERROR "Unrecognized MSVC_VERSION")
    endif()
  elseif (DEFINED CMAKE_COMPILER_IS_GNUCC)
    set (COMPILER gcc)
@@ -163,18 +161,13 @@ function (FIND_PRODUCT_DIR ROOT_DIR PRODUCT_NAME RESULT)
  OCCT_MAKE_COMPILER_BITNESS()

  string (TOLOWER "${PRODUCT_NAME}" lower_PRODUCT_NAME)
-  if ("${lower_PRODUCT_NAME}" STREQUAL "egl")
-    string (SUBSTRING "${lower_PRODUCT_NAME}" 1 -1 lower_PRODUCT_NAME)
-    list (APPEND SEARCH_TEMPLATES "[^gl]+${lower_PRODUCT_NAME}.*")
-  else()
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*${COMPILER}.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[a-zA-Z]*[0-9]*-${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*.*${COMPILER_BITNESS}")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+")
-    list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*")
-  endif()
+
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*${COMPILER}.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER}.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*.*${COMPILER_BITNESS}")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*[0-9.]+")
+  list (APPEND SEARCH_TEMPLATES "^[^a-zA-Z]*${lower_PRODUCT_NAME}[^a-zA-Z]*")

  SUBDIRECTORY_NAMES ("${ROOT_DIR}" SUBDIR_NAME_LIST)

@@ -274,7 +267,7 @@ macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOO
    list (LENGTH OCCT_ALL_FILE_NAMES ALL_FILES_NB)
    math (EXPR ALL_FILES_NB "${ALL_FILES_NB} - 1" )

-    # emit warnings if there are unprocessed headers
+    # emit warnings if there is unprocessed headers
    file (GLOB OCCT_ALL_FILES_IN_DIR "${OCCT_COLLECT_SOURCE_DIR}/${OCCT_PACKAGE}/*.*")
    file (GLOB OCCT_ALL_FILES_IN_PATCH_DIR "${BUILD_PATCH}/src/${OCCT_PACKAGE}/*.*")

@@ -307,8 +300,8 @@ macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOO
            list (APPEND OCCT_HEADER_FILES_COMPLETE ${OCCT_FILE_IN_DIR})

            # collect header files with name that does not contain its package one
-            string (REGEX MATCH "^${OCCT_PACKAGE}[_.]" IS_HEADER_MATHCING_PACKAGE "${OCCT_FILE_NAME}")
-            if (NOT IS_HEADER_MATHCING_PACKAGE)
+            string (FIND "${OCCT_FILE_NAME}" "${OCCT_PACKAGE}_" FOUND_INDEX)
+            if (NOT ${FOUND_INDEX} EQUAL 0)
              list (APPEND OCCT_HEADER_FILE_WITH_PROPER_NAMES "${OCCT_FILE_NAME}")
            endif()
          endif()
@@ -355,12 +348,12 @@ macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOO
    list (FIND OCCT_USED_PACKAGES ${PACKAGE_NAME} IS_HEADER_FOUND)
    if (NOT ${IS_HEADER_FOUND} EQUAL -1)
      if (NOT EXISTS "${OCCT_COLLECT_SOURCE_DIR}/${PACKAGE_NAME}/${HEADER_FILE_NAME}")
-        message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is not present in the sources and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
+        message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is not presented in the sources and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
        file (REMOVE "${OCCT_HEADER_FILE_OLD}")
      else()
        list (FIND OCCT_HEADER_FILE_NAMES_NOT_IN_FILES ${PACKAGE_NAME} IS_HEADER_FOUND)
        if (NOT ${IS_HEADER_FOUND} EQUAL -1)
-          message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is present in the sources but not involved in FILES and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
+          message (STATUS "Warning. ${OCCT_HEADER_FILE_OLD} is presented in the sources but not involved in FILES and will be removed from ${ROOT_TARGET_OCCT_DIR}/inc")
          file (REMOVE "${OCCT_HEADER_FILE_OLD}")
        endif()
      endif()
@@ -507,11 +500,11 @@ function (OCCT_TOOLKIT_FULL_DEP TOOLKIT_NAME TOOLKIT_FULL_DEPS)
  set (${TOOLKIT_FULL_DEPS} ${LOCAL_TOOLKIT_FULL_DEPS} PARENT_SCOPE)
 endfunction()

-# Function to get list of modules/toolkits/samples from file adm/${FILE_NAME}.
+# Function to get list of modules and toolkits from file adm/MODULES.
 # Creates list <$MODULE_LIST> to store list of MODULES and
-# <NAME_OF_MODULE>_TOOLKITS foreach module to store its toolkits, where "TOOLKITS" is defined by TOOLKITS_NAME_SUFFIX.
-function (OCCT_MODULES_AND_TOOLKITS FILE_NAME TOOLKITS_NAME_SUFFIX MODULE_LIST)
-  FILE_TO_LIST ("adm/${FILE_NAME}" FILE_CONTENT)
+# <NAME_OF_MODULE>_TOOLKITS foreach module to store its toolkits.
+function (OCCT_MODULES_AND_TOOLKITS MODULE_LIST)
+  FILE_TO_LIST ("adm/MODULES" FILE_CONTENT)

  foreach (CONTENT_LINE ${FILE_CONTENT})
    string (REPLACE " " ";" CONTENT_LINE ${CONTENT_LINE})
@@ -519,12 +512,30 @@ function (OCCT_MODULES_AND_TOOLKITS FILE_NAME TOOLKITS_NAME_SUFFIX MODULE_LIST)
    list (REMOVE_AT CONTENT_LINE 0)
    list (APPEND ${MODULE_LIST} ${MODULE_NAME})
    # (!) REMOVE THE LINE BELOW (implicit variables)
-    set (${MODULE_NAME}_${TOOLKITS_NAME_SUFFIX} ${CONTENT_LINE} PARENT_SCOPE)
+    set (${MODULE_NAME}_TOOLKITS ${CONTENT_LINE} PARENT_SCOPE)
  endforeach()

  set (${MODULE_LIST} ${${MODULE_LIST}} PARENT_SCOPE)
 endfunction()

+# Function to get list of tools and toolkits from file adm/TOOLS.
+# Creates list <$TOOL_LIST> to store list of TOOLS and
+# <NAME_OF_TOOL>_TOOLKITS foreach tool to store its toolkits.
+function (OCCT_TOOLS_AND_TOOLKITS TOOL_LIST)
+  FILE_TO_LIST ("adm/TOOLS" FILE_CONTENT)
+
+  foreach (CONTENT_LINE ${FILE_CONTENT})
+    string (REPLACE " " ";" CONTENT_LINE ${CONTENT_LINE})
+    list (GET CONTENT_LINE 0 TOOL_NAME)
+    list (REMOVE_AT CONTENT_LINE 0)
+    list (APPEND ${TOOL_LIST} ${TOOL_NAME})
+    # (!) REMOVE THE LINE BELOW (implicit variables)
+    set (${TOOL_NAME}_TOOL_TOOLKITS ${CONTENT_LINE} PARENT_SCOPE)
+  endforeach()
+
+  set (${TOOL_LIST} ${${TOOL_LIST}} PARENT_SCOPE)
+endfunction()
+
 # Returns OCC version string from file Standard_Version.hxx (if available)
 function (OCC_VERSION OCC_VERSION_MAJOR OCC_VERSION_MINOR OCC_VERSION_MAINTENANCE OCC_VERSION_DEVELOPMENT OCC_VERSION_STRING_EXT)

@@ -590,7 +601,7 @@ endmacro()
 # prior to version 3.3 not supporting per-configuration install paths
 # for install target files (see https://cmake.org/Bug/view.php?id=14317)
 macro (OCCT_UPDATE_TARGET_FILE)
-  if (MSVC)
+  if (NOT SINGLE_GENERATOR)
    OCCT_INSERT_CODE_FOR_TARGET ()
  endif()

--- a/adm/cmake/occt_toolkit.cmake
+++ b/adm/cmake/occt_toolkit.cmake
@@ -1,69 +1,28 @@
 # script for each OCCT toolkit

-# filling some variables by default values(src) or using custom(tools, samples)
-set (RELATIVE_SOURCES_DIR "${RELATIVE_DIR}")
-if ("${RELATIVE_SOURCES_DIR}" STREQUAL "")
-  #if it is not defined, use default directory
-  set (RELATIVE_SOURCES_DIR "src")
-endif()
-
-set (OCC_MODULES_LIST "${MODULES_LIST}")
-if ("${OCC_MODULES_LIST}" STREQUAL "")
-  set (OCC_MODULES_LIST ${OCCT_MODULES})
-endif()
-
-set (OCC_TARGET_FOLDER "${TARGET_FOLDER}")
-if ("${OCC_TARGET_FOLDER}" STREQUAL "")
-  set (OCC_TARGET_FOLDER "Modules")
-endif()
-
-set (OCCT_TOOLKITS_NAME_SUFFIX "${TOOLKITS_NAME_SUFFIX}")
-if ("${OCCT_TOOLKITS_NAME_SUFFIX}" STREQUAL "")
-  set (OCCT_TOOLKITS_NAME_SUFFIX "TOOLKITS")
-endif()
-
 # parce PACKAGES file
-FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
-if ("${USED_PACKAGES}" STREQUAL "")
-  set (USED_PACKAGES ${PROJECT_NAME})
+if ("${PROJECT_NAME}" STREQUAL DRAWEXE)
+  set (USED_PACKAGES DRAWEXE)
+else()
+  FILE_TO_LIST ("src/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
 endif()

-if (USE_QT)
-  # Qt dependencies
-  OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt_macro)
-  FIND_QT_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
-  include_directories("${PROJECT_INCLUDES}")
-endif(USE_QT)
-
 set (PRECOMPILED_DEFS)

 if (NOT BUILD_SHARED_LIBS)
  list (APPEND PRECOMPILED_DEFS "-DOCCT_NO_PLUGINS")
-  if (WIN32)
-    list (APPEND PRECOMPILED_DEFS "-DOCCT_STATIC_BUILD")
-  endif()
 endif()

 # Get all used packages from toolkit
-UNSET(RESOURCE_FILES)
 foreach (OCCT_PACKAGE ${USED_PACKAGES})
-
-  #remove part after "/" in the OCCT_PACKAGE variable if exists
-  string (FIND "${OCCT_PACKAGE}" "/" _index)
-  if (_index GREATER -1)
-    math (EXPR _index "${_index}")
-    string (SUBSTRING "${OCCT_PACKAGE}" 0 ${_index} OCCT_PACKAGE_NAME)
-  else()
-    set (OCCT_PACKAGE_NAME "${OCCT_PACKAGE}")
-  endif()
-
+  
  # TKService contains platform-dependent packages: Xw and WNT
  if ((WIN32 AND "${OCCT_PACKAGE}" STREQUAL "Xw") OR (NOT WIN32 AND "${OCCT_PACKAGE}" STREQUAL "WNT"))
    # do nothing
  else()

    if (WIN32)
-      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE_NAME}_DLL")
+      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
    endif()

    set (SOURCE_FILES)
@@ -73,11 +32,11 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
    if (${BUILD_YACCLEX})

      # flex files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
+      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
      list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)

      # bison files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
+      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
      list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)

      if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
@@ -99,8 +58,8 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
          if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
            set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
            set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
-            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
-            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
+            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
+            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
            ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
           
            list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
@@ -110,23 +69,23 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
    endif()

    # header files
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES")
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")

-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
      if(APPLE)
-        file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
+        file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
      endif()
    else()
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")

-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
      if(APPLE)
-        file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
+        file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
      endif()
    endif()
    
@@ -137,36 +96,26 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
    endif()

    foreach(HEADER_FILE ${HEADER_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        list (APPEND USED_INCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
      else()
-        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
      endif()
    endforeach()

    foreach(SOURCE_FILE ${SOURCE_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        list (APPEND USED_SRCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
      else()
-        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
      endif()
    endforeach()
-
-    if (USE_QT)
-      FIND_AND_INSTALL_QT_RESOURCES (${OCCT_PACKAGE} RESOURCE_FILES)
-      #message("Qt Resource files are: ${QT_RESOURCE_FILES} in ${OCCT_PACKAGE}")
-    endif(USE_QT)
-
-    #message("Resource files are: ${RESOURCE_FILES} in ${OCCT_PACKAGE}")
-    foreach(RESOURCE_FILE ${RESOURCE_FILES})
-      SOURCE_GROUP ("Resource Files\\${OCCT_PACKAGE_NAME}" FILES "${RESOURCE_FILE}")
-    endforeach()
  endif()
 endforeach()
 string (REGEX REPLACE ";" " " PRECOMPILED_DEFS "${PRECOMPILED_DEFS}")
@@ -183,30 +132,24 @@ if (MSVC)
 endif()

 set (CURRENT_MODULE)
-foreach (OCCT_MODULE ${OCC_MODULES_LIST})
-  list (FIND ${OCCT_MODULE}_${OCCT_TOOLKITS_NAME_SUFFIX} ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
-
+foreach (OCCT_MODULE ${OCCT_MODULES})
+  list (FIND ${OCCT_MODULE}_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
  if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
    set (CURRENT_MODULE ${OCCT_MODULE})
  endif()
 endforeach()

-if (MSVC)
+if (NOT SINGLE_GENERATOR)
  OCCT_INSERT_CODE_FOR_TARGET ()
 endif()

-if (USE_QT)
-  FIND_AND_WRAP_MOC_FILES("${USED_INCFILES}" "${PROJECT_NAME}_MOC_FILES")
-  #message("MOC files: ${${PROJECT_NAME}_MOC_FILES}")
-endif (USE_QT)
-
-if (EXECUTABLE_PROJECT)
-  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RESOURCE_FILES} ${${PROJECT_NAME}_MOC_FILES})
+if ("${PROJECT_NAME}" STREQUAL "DRAWEXE")
+  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})

  install (TARGETS ${PROJECT_NAME}
           DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
 else()
-  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RESOURCE_FILES} ${${PROJECT_NAME}_MOC_FILES})
+  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})

  if (MSVC)
    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
@@ -235,7 +178,7 @@ else()
 endif()

 if (CURRENT_MODULE)
-  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "${OCC_TARGET_FOLDER}/${CURRENT_MODULE}")
+  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "Modules/${CURRENT_MODULE}")
  set_target_properties (${PROJECT_NAME} PROPERTIES MODULE "${CURRENT_MODULE}")
  if (APPLE)
    if (NOT "${INSTALL_NAME_DIR}" STREQUAL "")
@@ -261,7 +204,7 @@ set (USED_TOOLKITS_BY_CURRENT_PROJECT)
 set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)

 # parce EXTERNLIB file
-FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
+FILE_TO_LIST ("src/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
 foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
  string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
  if (NOT COMMENT_FOUND)
@@ -338,34 +281,15 @@ if("${VTK_RENDERING_BACKEND}" STREQUAL "OpenGL2")
      list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT ${VTK_EXCLUDE_LIBRARY})
      if (${VTK_EXCLUDE_LIBRARY} STREQUAL vtkRenderingOpenGL)
        list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT vtkRenderingOpenGL2)
-        if(VTK_MAJOR_VERSION GREATER 6)
-          list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT vtkRenderingGL2PSOpenGL2)
-        endif()
      endif()
    endif()
  endforeach()
-else()
-  if(VTK_MAJOR_VERSION EQUAL 6 AND VTK_MINOR_VERSION GREATER 2 OR VTK_MAJOR_VERSION GREATER 6)
-    list (FIND USED_TOOLKITS_BY_CURRENT_PROJECT "vtkRenderingFreeTypeOpenGL" IS_VTK_RENDER_FREETYPE_FOUND)
-    if (NOT ${IS_VTK_RENDER_FREETYPE_FOUND} EQUAL -1)
-      list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT "vtkRenderingFreeTypeOpenGL")
-    endif()
-  endif()
 endif()

 if (BUILD_SHARED_LIBS)
  target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
 endif()

-if (USE_QT)
-  foreach (PROJECT_LIBRARY_DEBUG ${PROJECT_LIBRARIES_DEBUG})
-    target_link_libraries (${PROJECT_NAME} debug ${PROJECT_LIBRARY_DEBUG})
-  endforeach()
-  foreach (PROJECT_LIBRARY_RELEASE ${PROJECT_LIBRARIES_RELEASE})
-    target_link_libraries (${PROJECT_NAME} optimized ${PROJECT_LIBRARY_RELEASE})
-  endforeach()
-endif()
-
 # suppress deprecation warnings inside OCCT itself for old gcc versions with unavailable Standard_DISABLE_DEPRECATION_WARNINGS
 if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
  if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.6.0)
--- a/adm/cmake/occt_toolkit_prepare_sample.cmake
+++ b/adm/cmake/occt_toolkit_prepare_sample.cmake
@@ -1,18 +0,0 @@
-if ("${TARGET_FOLDER}" STREQUAL "")
-  set (EXECUTABLE_PROJECT ON)
-  set (USE_QT ON)
-
-  set (RELATIVE_DIR "samples/qt")
-  set (MODULES_LIST ${OCCT_SAMPLES})
-  set (TARGET_FOLDER "Samples")
-  set (TOOLKITS_NAME_SUFFIX "SAMPLES_TOOLKITS")
-
-  include_directories("${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/${RELATIVE_DIR}")
-else()
-  unset (USE_QT)
-  unset (RELATIVE_DIR)
-  unset (EXECUTABLE_PROJECT)
-  unset (MODULES_LIST)
-  unset (TARGET_FOLDER)
-  unset (TOOLKITS_NAME_SUFFIX)
-endif("${TARGET_FOLDER}" STREQUAL "")
--- a/adm/cmake/occt_toolkit_prepare_tool.cmake
+++ b/adm/cmake/occt_toolkit_prepare_tool.cmake
@@ -1,13 +0,0 @@
-if ("${TARGET_FOLDER}" STREQUAL "")
-  set (USE_QT ON)
-  set (RELATIVE_DIR "tools")
-  set (MODULES_LIST ${OCCT_TOOLS})
-  set (TARGET_FOLDER "Tools")
-  set (TOOLKITS_NAME_SUFFIX "TOOL_TOOLKITS")
-else()
-  unset (USE_QT)
-  unset (RELATIVE_DIR)
-  unset (MODULES_LIST)
-  unset (TARGET_FOLDER)
-  unset (TOOLKITS_NAME_SUFFIX)
-endif("${TARGET_FOLDER}" STREQUAL "")
--- a/adm/cmake/occt_toolkit_tool.cmake
+++ b/adm/cmake/occt_toolkit_tool.cmake
@@ -0,0 +1,301 @@
+# script for each OCCT tool toolkit
+
+# Qt dependencies
+OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt_macro)
+
+FIND_QT_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
+include_directories("${PROJECT_INCLUDES}"
+                    "${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/tools")
+
+FILE_TO_LIST ("tools/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+# parce PACKAGES file
+
+if ("${PROJECT_NAME}" STREQUAL TInspectorEXE)
+  set (USED_PACKAGES ${PROJECT_NAME})
+  set (PACKAGE_PREFIX_DIR "samples/tools")
+  include_directories("${PROJECT_INCLUDES}"
+                      "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${PROJECT_NAME}")
+else()
+  FILE_TO_LIST ("tools/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+  set (PACKAGE_PREFIX_DIR "tools")
+endif()
+
+
+SET (RCC_FILES)
+foreach (OCCT_PACKAGE ${USED_PACKAGES})
+  file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+
+  #message("Sources are ${SOURCE_FILES_C}")
+  FIND_AND_WRAP_MOC_FILES("${SOURCE_FILES_C}")
+
+  #message("Dir is ${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${OCCT_PACKAGE}.qrc")
+  FIND_AND_WRAP_RESOURCE_FILE("${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${OCCT_PACKAGE}.qrc" RCC_FILES)
+endforeach()
+#message("RCC_FILES for ${PROJECT_NAME} are ${RCC_FILES}")
+
+set (PRECOMPILED_DEFS)
+
+if (NOT BUILD_SHARED_LIBS)
+  list (APPEND PRECOMPILED_DEFS "-DOCCT_NO_PLUGINS")
+endif()
+
+# Get all used packages from toolkit
+foreach (OCCT_PACKAGE ${USED_PACKAGES})
+
+  ADD_DEFINITIONS(-D${OCCT_PACKAGE}_EXPORTS)
+  
+  # TKService contains platform-dependent packages: Xw and WNT
+  if ((WIN32 AND "${OCCT_PACKAGE}" STREQUAL "Xw") OR (NOT WIN32 AND "${OCCT_PACKAGE}" STREQUAL "WNT"))
+    # do nothing
+  else()
+
+    if (WIN32)
+      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
+    endif()
+
+    set (SOURCE_FILES)
+    set (HEADER_FILES)
+
+    # Generate Flex and Bison files
+    if (${BUILD_YACCLEX})
+
+      # flex files
+      OCCT_ORIGIN_AND_PATCHED_FILES ("tools/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
+      list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
+
+      # bison files
+      OCCT_ORIGIN_AND_PATCHED_FILES ("tools/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
+      list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
+
+      if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
+      
+        list (SORT SOURCE_FILES_FLEX)
+        list (SORT SOURCE_FILES_BISON)
+
+        math (EXPR SOURCE_FILES_FLEX_LEN "${SOURCE_FILES_FLEX_LEN} - 1")
+        foreach (FLEX_FILE_INDEX RANGE ${SOURCE_FILES_FLEX_LEN})
+
+          list (GET SOURCE_FILES_FLEX ${FLEX_FILE_INDEX} CURRENT_FLEX_FILE)
+          get_filename_component (CURRENT_FLEX_FILE_NAME ${CURRENT_FLEX_FILE} NAME_WE)
+
+          list (GET SOURCE_FILES_BISON ${FLEX_FILE_INDEX} CURRENT_BISON_FILE)
+          get_filename_component (CURRENT_BISON_FILE_NAME ${CURRENT_BISON_FILE} NAME_WE)
+          
+          string (COMPARE EQUAL ${CURRENT_FLEX_FILE_NAME} ${CURRENT_BISON_FILE_NAME} ARE_FILES_EQUAL)
+
+          if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
+            set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
+            set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
+            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/tools/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
+            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/tools/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
+            ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
+           
+            list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
+          endif()
+        endforeach()
+      endif()
+    endif()
+
+    # header files
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
+
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+      if(APPLE)
+        file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
+      endif()
+    else()
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
+
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
+      if(APPLE)
+        file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
+      endif()
+    endif()
+
+
+    
+    list (APPEND HEADER_FILES ${HEADER_FILES_M} ${HEADER_FILES_LXX} ${SOURCE_FILES_GXX})
+    list (APPEND SOURCE_FILES ${SOURCE_FILES_C})
+    if(APPLE)
+      list (APPEND SOURCE_FILES ${SOURCE_FILES_M})
+    endif()
+
+    foreach(HEADER_FILE ${HEADER_FILES})
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+      else()
+        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+      endif()
+    endforeach()
+
+
+    foreach(SOURCE_FILE ${SOURCE_FILES})
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      else()
+        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      endif()
+    endforeach()
+  endif()
+endforeach()
+string (REGEX REPLACE ";" " " PRECOMPILED_DEFS "${PRECOMPILED_DEFS}")
+
+set (USED_RCFILE "")
+if (MSVC)
+  set (USED_RCFILE "${CMAKE_BINARY_DIR}/resources/${PROJECT_NAME}.rc")
+
+  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in")
+    configure_file("${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
+  else()
+    configure_file("${CMAKE_SOURCE_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
+  endif()
+endif()
+
+set (CURRENT_MODULE)
+foreach (OCCT_MODULE ${OCCT_TOOLS})
+  list (FIND ${OCCT_MODULE}_TOOL_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
+  if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
+    set (CURRENT_MODULE ${OCCT_MODULE})
+  endif()
+endforeach()
+
+if (NOT SINGLE_GENERATOR)
+  OCCT_INSERT_CODE_FOR_TARGET ()
+endif()
+
+if ("${PROJECT_NAME}" STREQUAL TInspectorEXE)
+  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RCC_FILES})
+
+  install (TARGETS ${PROJECT_NAME}
+           DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
+else()
+  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RCC_FILES})
+
+  if (MSVC)
+    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
+             CONFIGURATIONS Debug RelWithDebInfo
+             DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
+  endif()
+
+  if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
+    set (CMAKE_SHARED_LIBRARY_SUFFIX_DEFAULT ${CMAKE_SHARED_LIBRARY_SUFFIX})
+    set (CMAKE_SHARED_LIBRARY_SUFFIX "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}${CMAKE_SHARED_LIBRARY_SUFFIX}")
+  endif()
+
+  install (TARGETS ${PROJECT_NAME}
+           EXPORT OpenCASCADE${CURRENT_MODULE}Targets
+           RUNTIME DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}"
+           ARCHIVE DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}"
+           LIBRARY DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}")
+
+
+  if (NOT WIN32)
+    if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
+      set (LINK_NAME    "${INSTALL_DIR}/${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}/lib${PROJECT_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX_DEFAULT}/tools")
+      set (LIBRARY_NAME "${INSTALL_DIR}/${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}/lib${PROJECT_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX}/tools")
+      OCCT_CREATE_SYMLINK_TO_FILE (${LIBRARY_NAME} ${LINK_NAME})
+    endif()
+  endif()
+endif()
+
+if (CURRENT_MODULE)
+  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "Tools/${CURRENT_MODULE}")
+  set_target_properties (${PROJECT_NAME} PROPERTIES MODULE "${CURRENT_MODULE}")
+  if (APPLE)
+    if (NOT "${INSTALL_NAME_DIR}" STREQUAL "")
+      set_target_properties (${PROJECT_NAME} PROPERTIES BUILD_WITH_INSTALL_RPATH 1 INSTALL_NAME_DIR "${INSTALL_NAME_DIR}")
+    endif()
+  endif()
+endif()
+
+get_property (OCC_VERSION_MAJOR GLOBAL PROPERTY OCC_VERSION_MAJOR)
+get_property (OCC_VERSION_MINOR GLOBAL PROPERTY OCC_VERSION_MINOR)
+get_property (OCC_VERSION_MAINTENANCE GLOBAL PROPERTY OCC_VERSION_MAINTENANCE)
+
+if (ANDROID)
+  # do not append version to the filename
+  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}")
+else()
+  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}"
+                                                    SOVERSION     "${OCC_VERSION_MAJOR}"
+                                                    VERSION       "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}.${OCC_VERSION_MAINTENANCE}")
+endif()
+
+set (USED_TOOLKITS_BY_CURRENT_PROJECT)
+set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)
+
+# parce EXTERNLIB file
+FILE_TO_LIST ("${PACKAGE_PREFIX_DIR}/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
+foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
+  string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
+  if (NOT COMMENT_FOUND)
+    string (REGEX MATCH "^TK" TK_FOUND ${USED_ITEM})
+    string (REGEX MATCH "^vtk" VTK_FOUND ${USED_ITEM})
+    
+    if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
+      list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
+      if (NOT "${VTK_FOUND}" STREQUAL "" AND BUILD_SHARED_LIBS AND INSTALL_VTK AND COMMAND OCCT_INSTALL_VTK)
+        OCCT_INSTALL_VTK(${USED_ITEM})
+      endif()
+    else()
+      string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
+      if ("${CSF_FOUND}" STREQUAL "")
+        message (STATUS "Info: ${USED_ITEM} from ${PROJECT_NAME} skipped due to it is empty")
+      else() # get CSF_ value
+        set (CURRENT_CSF ${${USED_ITEM}})
+        if (NOT "x${CURRENT_CSF}" STREQUAL "x")
+          # prepare a list from a string with whitespaces
+          separate_arguments (CURRENT_CSF)
+          list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT ${CURRENT_CSF})
+        endif()
+      endif()
+    endif()
+  endif()
+endforeach()
+
+if (APPLE)
+  list (FIND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT X11 IS_X11_FOUND)
+  if (NOT ${IS_X11_FOUND} EQUAL -1)
+    find_package (X11 COMPONENTS X11 Xext Xmu Xi)
+    if (NOT X11_FOUND)
+      message (STATUS "Warning: X11 is not found. It's required to install The XQuartz project: http://www.xquartz.org")
+    endif()
+  endif()
+endif()
+
+# Update list of used VTK libraries if OpenGL2 Rendering BackEnd is used.
+# Add VTK_OPENGL2_BACKEND definition.
+if("${VTK_RENDERING_BACKEND}" STREQUAL "OpenGL2")
+  add_definitions(-DVTK_OPENGL2_BACKEND)
+  foreach (VTK_EXCLUDE_LIBRARY vtkRenderingOpenGL vtkRenderingFreeTypeOpenGL)
+    list (FIND USED_TOOLKITS_BY_CURRENT_PROJECT "${VTK_EXCLUDE_LIBRARY}" IS_VTK_OPENGL_FOUND)
+    if (NOT ${IS_VTK_OPENGL_FOUND} EQUAL -1)
+      list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT ${VTK_EXCLUDE_LIBRARY})
+      if (${VTK_EXCLUDE_LIBRARY} STREQUAL vtkRenderingOpenGL)
+        list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT vtkRenderingOpenGL2)
+      endif()
+    endif()
+  endforeach()
+endif()
+
+if (BUILD_SHARED_LIBS)
+  target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
+endif()
+
+# Set Qt dependencies
+target_link_libraries(${PROJECT_NAME} "${PROJECT_LIBRARIES}")
+
+target_link_libraries(${PROJECT_NAME} debug "${PROJECT_LIBRARIES_DEBUG}")
+target_link_libraries(${PROJECT_NAME} optimized "${PROJECT_LIBRARIES_RELEASE}")
+
--- a/adm/cmake/qt.cmake
+++ b/adm/cmake/qt.cmake
@@ -1,34 +1,20 @@
 #qt

-# Qt is searched manually first (just determine root)
-message (STATUS "Processing Qt 3-rd party")
+#looking for 3RDPARTY_QT_DIR variable used later in qt_macro.cmake
+SET(CSF_QtCore "QtCore")
+THIRDPARTY_PRODUCT("QT" "" "CSF_QtCore" "d")

-if (NOT DEFINED ${3RDPARTY_QT_DIR} AND ${3RDPARTY_QT_DIR} STREQUAL "")
-  FIND_PRODUCT_DIR ("${3RDPARTY_DIR}" Qt 3RDPARTY_QT_DIR_NAME)
+list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_QT_DIR}/bin")

-  if (NOT DEFINED ${3RDPARTY_QT_DIR_NAME} AND ${3RDPARTY_QT_DIR_NAME} STREQUAL "")
-    message (FATAL_ERROR "... Qt root directory was not found")
-  endif()
+list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_INCLUDE_DIR")
+list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_LIBRARY_DIR")
+list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_DLL_DIR")

-  # Combine directory name with absolute path and show in GUI
-  set (3RDPARTY_QT_DIR "${3RDPARTY_DIR}/${3RDPARTY_QT_DIR_NAME}" CACHE PATH "The directory containing Qt" FORCE)
-  message (STATUS "Info: Qt is used from folder: ${3RDPARTY_QT_DIR}")
-endif()
+UNSET (${3RDPARTY_QT_DLL} CACHE)
+UNSET (${3RDPARTY_QT_DLL_DIR} CACHE)
+UNSET (${3RDPARTY_QT_INCLUDE_DIR} CACHE)
+UNSET (${3RDPARTY_QT_LIBRARY} CACHE)
+UNSET (${3RDPARTY_QT_LIBRARY_DIR} CACHE)

 set (USED_3RDPARTY_QT_DIR "${3RDPARTY_QT_DIR}")
-
-# Now set CMAKE_PREFIX_PATH to point to local Qt installation.
-# Without this setting find_package() will not work
-set(CMAKE_PREFIX_PATH ${3RDPARTY_QT_DIR})
-
-# Now we can apply standard CMake finder for Qt5. We do this mostly
-# to have qt5_wrap_cpp() function available and Qt5_FOUND variable filled
-find_package(Qt5 QUIET COMPONENTS Widgets Quick Xml PATHS ${3RDPARTY_QT_DIR} NO_DEFAULT_PATH)
-if (NOT ${Qt5_FOUND})
-  # Now we can apply standard CMake finder for Qt. We do this mostly
-  # to have qt4_wrap_cpp() function available
-  find_package(Qt4)
-  #message (STATUS "Qt4 cmake configuration")
-else()
-  #message (STATUS "Qt5 cmake configuration")
-endif()
+message (STATUS "Info: Qt is used from folder: ${3RDPARTY_QT_DIR}")
--- a/adm/cmake/qt_macro.cmake
+++ b/adm/cmake/qt_macro.cmake
@@ -6,50 +6,51 @@ macro (FIND_QT_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT
    message (FATAL_ERROR "Empty Qt dir")
  endif()

+  # Now set CMAKE_PREFIX_PATH to point to local Qt installation.
+  # Without this setting find_package() will not work
+  set(CMAKE_PREFIX_PATH ${3RDPARTY_QT_DIR})
+
+  # Now we can apply standard CMake finder for Qt5. We do this mostly
+  # to have qt5_wrap_cpp() function available
+  find_package(Qt5 QUIET COMPONENTS Widgets PATHS ${3RDPARTY_QT_DIR} NO_DEFAULT_PATH)
  if (${Qt5_FOUND})
    #message (STATUS "Qt5 cmake configuration")

-    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}" "${Qt5Quick_INCLUDE_DIRS}" "${Qt5Xml_INCLUDE_DIRS}")
-    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}" "${Qt5Quick_LIBRARIES}" "${Qt5Xml_LIBRARIES}")
-    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}" "${Qt5Quick_LIBRARIES}" "${Qt5Xml_LIBRARIES}")
-
-    # processing *.ts files to generate *.qm
-    find_package(Qt5LinguistTools)
-    get_target_property(QT_LRELEASE_EXECUTABLE Qt5::lrelease LOCATION)
-    mark_as_advanced(QT_LRELEASE_EXECUTABLE)
-
-    GET_FILENAME_COMPONENT(QT_BINARY_DIR ${QT_LRELEASE_EXECUTABLE} DIRECTORY)
-    MARK_AS_ADVANCED(QT_BINARY_DIR)
+    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}")
+    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}")
+    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}")
  else()
+    # Now we can apply standard CMake finder for Qt. We do this mostly
+    # to have qt4_wrap_cpp() function available
+    find_package(Qt4)
+
    #message (STATUS "Qt4 cmake configuration")
    set(PROJECT_INCLUDES ${QT_INCLUDES})
    if (WIN32)
-      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/QtCored4.lib;${3RDPARTY_QT_DIR}/lib/QtGuid4.lib;${3RDPARTY_QT_DIR}/lib/QtXmld4.lib")
-      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/QtCore4.lib;${3RDPARTY_QT_DIR}/lib/QtGui4.lib;${3RDPARTY_QT_DIR}/lib/QtXml4.lib")
+      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/QtCored4.lib;${3RDPARTY_QT_DIR}/lib/QtGuid4.lib")
+      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/QtCore4.lib;${3RDPARTY_QT_DIR}/lib/QtGui4.lib")
    else()
-      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so;${3RDPARTY_QT_DIR}/lib/libQtXml.so")
-      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so;${3RDPARTY_QT_DIR}/lib/libQtXml.so")
+      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
+      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
    endif(WIN32)
-    find_program(QT_LRELEASE_EXECUTABLE lrelease)
  endif()
 endmacro()


-macro (FIND_AND_WRAP_MOC_FILES HEADER_FILES GENERATED_MOC_FILES)
-  set (GENERATED_MOC_FILES "")
-  foreach (FILE ${HEADER_FILES})
-    # processing only files where Q_OBJECT exists
-    file(STRINGS "${FILE}" LINES REGEX "Q_OBJECT")
-    if(LINES)
-      unset (MOC_FILE)
-      if (${Qt5_FOUND})
-        qt5_wrap_cpp(MOC_FILE ${FILE})
-      else()
-        qt4_wrap_cpp(MOC_FILE ${FILE})
-      endif()
-      #message (STATUS "... Info: next MOC file ${MOC_FILE}")
-      list(APPEND ${GENERATED_MOC_FILES} ${MOC_FILE})
-     endif(LINES)
+macro (FIND_AND_WRAP_MOC_FILES SOURCE_FILES)
+
+  SET(CMAKE_AUTOMOC ON)
+
+  foreach (FILE ${SOURCE_FILES})
+    set (src_files ${src_files} ${FILE})
+    unset (MOC_FILE)
+    if (${Qt5_FOUND})
+      qt5_wrap_cpp(MOC_FILE ${FILE})
+    else()
+      qt4_wrap_cpp(MOC_FILE ${FILE})
+    endif()
+    #message (STATUS "... Info: next MOC file ${MOC_FILE}")
+
  endforeach (FILE)

 endmacro()
@@ -67,51 +68,3 @@ macro (FIND_AND_WRAP_RESOURCE_FILE RESOURCE_FILE_NAME RCC_FILES)
    endif()
  endif()
 endmacro()
-
-macro (FIND_AND_WRAP_TS_FILE RESOURCE_FILE_NAME TARGET_FOLDER QM_FILES)
-  if(EXISTS "${RESOURCE_FILE_NAME}")
-    if (${Qt5_FOUND})
-      qt5_add_translation(QM_FILES "${RESOURCE_FILE_NAME}")
-    else()
-      qt4_add_translation(QM_FILES "${RESOURCE_FILE_NAME}")
-    endif()
-  endif()
-endmacro()
-
-macro (FIND_AND_INSTALL_QT_RESOURCES OCCT_PACKAGE RESOURCE_FILES)
-  file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   TS_FILES   REGEX ".+[.]ts")
-  file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   QRC_FILES  REGEX ".+[.]qrc")
-
-  string (FIND "${OCCT_PACKAGE}" "/" _index)
-  if (_index GREATER -1)
-    math (EXPR _index "${_index}")
-    string (SUBSTRING "${OCCT_PACKAGE}" 0 ${_index} OCCT_PACKAGE_NAME)
-  else()
-    set (OCCT_PACKAGE_NAME "${OCCT_PACKAGE}")
-  endif(_index GREATER -1)
-
-  #message("QRC files are: ${QRC_FILES} in ${OCCT_PACKAGE}")
-  foreach (QRC_FILE ${QRC_FILES})
-    set (QRC_FILE_RELATIVE "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${QRC_FILE}")
-    if (EXISTS ${QRC_FILE_RELATIVE})
-      FIND_AND_WRAP_RESOURCE_FILE(${QRC_FILE_RELATIVE} RCC_FILES)
-      list (APPEND ${RESOURCE_FILES} "${RCC_FILES}")
-    endif()
-  endforeach()
-
-  #message("TS files are: ${TS_FILES} in ${OCCT_PACKAGE}")
-  foreach (TS_FILE ${TS_FILES})
-    set (TS_FILE_RELATIVE "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${TS_FILE}")
-    FIND_AND_WRAP_TS_FILE(${TS_FILE_RELATIVE} "${TARGET_FOLDER}/${CURRENT_MODULE}" QM_FILES)
-    if (EXISTS ${TS_FILE_RELATIVE})
-      list (APPEND ${RESOURCE_FILES} "${TS_FILE_RELATIVE}")
-      list (APPEND ${RESOURCE_FILES} "${QM_FILES}")
-    endif()
-  endforeach()
-
-  foreach (QM_FILE ${QM_FILES})
-    INSTALL(FILES ${QM_FILE} DESTINATION "${INSTALL_DIR_RESOURCE}/samples")
-    #message("install *.qm files (${QM_FILE}) to: ${INSTALL_DIR_RESOURCE}/samples")
-  endforeach (QM_FILE ${QM_FILES})
-endmacro()
-
--- a/adm/cmake/rapidjson.cmake
+++ b/adm/cmake/rapidjson.cmake
@@ -1,86 +0,0 @@
-# RapidJSON
-
-if (NOT DEFINED INSTALL_RAPIDJSON)
-  set (INSTALL_RAPIDJSON OFF CACHE BOOL "${INSTALL_RAPIDJSON_DESCR}")
-endif()
-
-# RapidJSON directory
-if (NOT DEFINED 3RDPARTY_RAPIDJSON_DIR)
-  set (3RDPARTY_RAPIDJSON_DIR "" CACHE PATH "The directory containing RapidJSON")
-endif()
-
-# search for RapidJSON in user defined directory
-if (3RDPARTY_DIR AND EXISTS "${3RDPARTY_DIR}")
-  if (NOT 3RDPARTY_RAPIDJSON_DIR OR NOT EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
-    FIND_PRODUCT_DIR("${3RDPARTY_DIR}" RapidJSON RAPIDJSON_DIR_NAME)
-    if (RAPIDJSON_DIR_NAME)
-      set (3RDPARTY_RAPIDJSON_DIR "${3RDPARTY_DIR}/${RAPIDJSON_DIR_NAME}" CACHE PATH "The directory containing RapidJSON" FORCE)
-    endif()
-  endif()
-endif()
-
-if (NOT DEFINED 3RDPARTY_RAPIDJSON_INCLUDE_DIR)
-  set (3RDPARTY_RAPIDJSON_INCLUDE_DIR  "" CACHE FILEPATH "The directory containing headers of the RAPIDJSON")
-endif()
-
-if (NOT 3RDPARTY_RAPIDJSON_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
-
-  set (HEADER_NAMES rapidjson/rapidjson.h)
-
-  set (3RDPARTY_RAPIDJSON_INCLUDE_DIR "3RDPARTY_RAPIDJSON_INCLUDE_DIR-NOTFOUND" CACHE PATH "the path to RapidJSON header file" FORCE)
-
-  if (3RDPARTY_RAPIDJSON_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
-    find_path (3RDPARTY_RAPIDJSON_INCLUDE_DIR NAMES ${HEADER_NAMES}
-                                              PATHS ${3RDPARTY_RAPIDJSON_DIR}
-                                              PATH_SUFFIXES include rapidjson
-                                              CMAKE_FIND_ROOT_PATH_BOTH
-                                              NO_DEFAULT_PATH)
-  else()
-    find_path (3RDPARTY_RAPIDJSON_INCLUDE_DIR NAMES ${HEADER_NAMES}
-                                              PATH_SUFFIXES include rapidjson
-                                              CMAKE_FIND_ROOT_PATH_BOTH)
-  endif()
-
-  # use default (CMake) RapidJSON search
-  if (NOT 3RDPARTY_RAPIDJSON_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
-    if (3RDPARTY_RAPIDJSON_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
-      set (CACHED_RAPIDJSON_DIR $ENV{RapidJSON_DIR})
-      set (ENV{RapidJSON_DIR} "${3RDPARTY_RAPIDJSON_DIR}")
-    endif()
-
-    find_package(RapidJSON QUIET)
-
-    # restore ENV{RapidJSON_DIR}
-    if (3RDPARTY_RAPIDJSON_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_DIR}")
-      set (ENV{RapidJSON_DIR} ${CACHED_RAPIDJSON_DIR})
-    endif()
-
-    if (${RAPIDJSON_FOUND})
-      set (3RDPARTY_RAPIDJSON_INCLUDE_DIR "${RAPIDJSON_INCLUDE_DIR}" CACHE PATH "the path to RapidJSON header file" FORCE)
-      set (3RDPARTY_RAPIDJSON_DIR         "${RAPIDJSON_ROOT_DIR}"    CACHE PATH "The directory containing RapidJSON" FORCE)
-    endif()
-  endif()
-endif()
-
-if (3RDPARTY_RAPIDJSON_INCLUDE_DIR AND EXISTS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
-  list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}")
-
-  # Install header files
-  if (INSTALL_RAPIDJSON)
-    file(GLOB RAPIDJSON_SUBDIRS "${3RDPARTY_RAPIDJSON_INCLUDE_DIR}/*")
-    foreach(SUBDIR ${RAPIDJSON_SUBDIRS})
-      if(IS_DIRECTORY "${SUBDIR}")
-        install (DIRECTORY "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
-      else()
-        install (FILES "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
-      endif()
-    endforeach()
-  endif()
-else()
-  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_RAPIDJSON_INCLUDE_DIR)
-
-  set (3RDPARTY_RAPIDJSON_INCLUDE_DIR "" CACHE PATH "the path to RapidJSON header file" FORCE)
-endif()
-
-# unset all redundant variables
-OCCT_CHECK_AND_UNSET(RapidJSON_DIR)
--- a/adm/cmake/tbb.cmake
+++ b/adm/cmake/tbb.cmake
@@ -173,7 +173,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
  if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
  else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)

    set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY "" CACHE FILEPATH "The path to ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
  endif()
@@ -226,7 +226,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
    if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR OR EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
    else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
    endif()
  endif()

@@ -275,7 +275,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
  mark_as_advanced (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL)
 endmacro()

-#if (BUILD_SHARED_LIBS)
+if (BUILD_SHARED_LIBS)
  separate_arguments (CSF_TBB)
  foreach (LIB IN LISTS CSF_TBB)
    TBB_PRODUCT_SEARCH (${LIB})
@@ -291,4 +291,4 @@ endmacro()
      set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_LIBRARY_DIR})
    endif()
  endif()
-#endif()
+endif()
--- a/adm/cmake/tcl.cmake
+++ b/adm/cmake/tcl.cmake
@@ -184,14 +184,14 @@ if (BUILD_SHARED_LIBS)
  if (3RDPARTY_TCL_LIBRARY AND EXISTS "${3RDPARTY_TCL_LIBRARY}")
    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_TCL_LIBRARY_DIR}")
  else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_TCL_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TCL_LIBRARY_DIR)
  endif()

  if (WIN32)
    if (3RDPARTY_TCL_DLL OR EXISTS "${3RDPARTY_TCL_DLL}")
      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_TCL_DLL_DIR}")
    else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_TCL_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TCL_DLL_DIR)
    endif()
  endif()

--- a/adm/cmake/tk.cmake
+++ b/adm/cmake/tk.cmake
@@ -190,14 +190,14 @@ if (BUILD_SHARED_LIBS)
  if (3RDPARTY_TK_LIBRARY AND EXISTS "${3RDPARTY_TK_LIBRARY}")
    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_TK_LIBRARY_DIR}")
  else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_TK_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TK_LIBRARY_DIR)
  endif()

  if (WIN32)
    if (3RDPARTY_TK_DLL OR EXISTS "${3RDPARTY_TK_DLL}")
      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_TK_DLL_DIR}")
    else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_TK_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TK_DLL_DIR)
    endif()
  endif()

--- a/adm/cmake/vardescr.cmake
+++ b/adm/cmake/vardescr.cmake
@@ -28,11 +28,6 @@ Applies only for Debug configuration.")
 set (BUILD_SHARED_LIBRARY_NAME_POSTFIX_DESCR
 "Append the postfix to names of output libraries")

-set (BUILD_RELEASE_DISABLE_EXCEPTIONS_DESCR
-"Disables exceptions like Standard_OutOfRange in Release builds.
-Defines No_Exception macros for Release builds when enabled (default).
-These exceptions are always enabled in Debug builds, but disable in Release for better performance")
-
 set (BUILD_ENABLE_FPE_SIGNAL_HANDLER_DESCR
 "Enable/Disable the floating point exceptions (FPE) during DRAW execution only.
 Corresponding environment variable (CSF_FPE) can be changed manually
@@ -45,7 +40,7 @@ Precompiled headers are generated automatically by Cotire tool.")
 # install variables
 set (INSTALL_DIR_DESCR 
 "The place where built OCCT libraries, headers, test cases (INSTALL_TEST_CASES variable),
-samples (INSTALL_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_TBB and
+samples (INSTALL_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_GL2PS, INSTALL_TBB and
 other similar variables) will be placed during the installation process (building INSTALL project)")

 set (INSTALL_DIR_WITH_VERSION_DESCR
@@ -93,8 +88,8 @@ INSTALL_MESSAGE (INSTALL_EIGEN            "EIGEN header files")
 INSTALL_MESSAGE (INSTALL_EGL              "EGL binaries")
 INSTALL_MESSAGE (INSTALL_GLES2            "OpenGL ES 2.0 binaries")
 INSTALL_MESSAGE (INSTALL_FREETYPE         "FreeType binaries")
+INSTALL_MESSAGE (INSTALL_GL2PS            "GL2PS binaries")
 INSTALL_MESSAGE (INSTALL_TBB              "TBB binaries")
-INSTALL_MESSAGE (INSTALL_RAPIDJSON        "RapidJSON header files")
 INSTALL_MESSAGE (INSTALL_TCL              "TCL binaries")
 INSTALL_MESSAGE (INSTALL_TK               "TK binaries")
 INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
@@ -122,16 +117,11 @@ want to build some particular libraries (toolkits) only, then you may uncheck
 all modules in the corresponding BUILD_MODUE_* options and provide the list of
 necessary libraries here. Of course, all dependencies will be resolved automatically")

-set (BUILD_SAMPLES_MFC_DESCR
+set (BUILD_MODULE_MfcSamples_DESCR
 "Indicates whether OCCT MFC samples should be built together with OCCT.
 These samples show some possibilities of using OCCT and they can be executed
 with script samples.bat from the installation directory (INSTALL_DIR)")

-set (BUILD_SAMPLES_QT_DESCR
-"Indicates whether OCCT Qt samples should be built together with OCCT.
-These samples show some possibilities of using OCCT and they can be executed
-with script samples.bat from the installation directory (INSTALL_DIR)")
-
 set (BUILD_Inspector_DESCR
 "Indicates whether OCCT inspector should be built together with OCCT.
 This inspector provides functionality to interactively inspect low-level content
@@ -162,10 +152,6 @@ set (USE_FREEIMAGE_DESCR
 "Indicates whether Freeimage product should be used in OCCT visualization
 module for support of popular graphics image formats (PNG, BMP etc)")

-set (USE_RAPIDJSON_DESCR
-"Indicates whether RapidJSON product should be used in OCCT DataExchange
-module for support of JSON-based formats like glTF")
-
 set (USE_EGL_DESCR
 "Indicates whether EGL should be used in OCCT visualization
 module instead of conventional OpenGL context creation APIs")
@@ -174,6 +160,10 @@ set (USE_GLES2_DESCR
 "Indicates whether OpenGL ES 2.0 should be used in OCCT visualization
 module instead of desktop OpenGL")

+set (USE_GL2PS_DESCR
+"Indicates whether GL2PS product should be used in OCCT visualization
+module for support of vector image formats (PS, EPS etc)")
+
 set (USE_TBB_DESCR
 "Indicates whether TBB is used or not. TBB stands for Threading Building Blocks,
 the technology of Intel Corp, which comes with different mechanisms and patterns for
--- a/adm/cmake/vtk.cmake
+++ b/adm/cmake/vtk.cmake
@@ -31,7 +31,7 @@ if (NOT DEFINED 3RDPARTY_VTK_INCLUDE_DIR)
  set (3RDPARTY_VTK_INCLUDE_DIR "" CACHE PATH "The directory containing headers of VTK")
 endif()

-#if (BUILD_SHARED_LIBS)
+if (BUILD_SHARED_LIBS)
  # vtk library directory
  if (NOT DEFINED 3RDPARTY_VTK_LIBRARY_DIR)
    set (3RDPARTY_VTK_LIBRARY_DIR "" CACHE PATH "The directory containing VTK libraries")
@@ -41,7 +41,7 @@ endif()
  if (WIN32 AND NOT DEFINED 3RDPARTY_VTK_DLL_DIR)
    set (3RDPARTY_VTK_DLL_DIR "" CACHE PATH "The directory containing VTK shared libraries")
  endif()
-#endif()
+endif()

 # check 3RDPARTY_VTK_ paths for consistency with specified 3RDPARTY_VTK_DIR
 if (3RDPARTY_VTK_DIR AND EXISTS "${3RDPARTY_VTK_DIR}")
@@ -75,10 +75,10 @@ if (VTK_FOUND)

    set (3RDPARTY_VTK_INCLUDE_DIRS)

-#    if (BUILD_SHARED_LIBS)
+    if (BUILD_SHARED_LIBS)
      set (3RDPARTY_VTK_LIBRARY_DIRS)
      set (3RDPARTY_VTK_DLL_DIRS)
-#    endif()
+    endif()

    foreach (VTK_LIBRARY ${VTK_LIBRARIES})
      string (REGEX MATCH "^vtk" IS_VTK_LIBRARY ${VTK_LIBRARY})
@@ -168,7 +168,7 @@ if (VTK_FOUND)
    set (3RDPARTY_VTK_INCLUDE_DIR "${3RDPARTY_VTK_INCLUDE_DIR}" CACHE PATH "The directory containing headers of VTK" FORCE)
  endif()

-#  if (BUILD_SHARED_LIBS)
+  if (BUILD_SHARED_LIBS)
    if (3RDPARTY_VTK_LIBRARY_DIRS)
      list (REMOVE_DUPLICATES 3RDPARTY_VTK_LIBRARY_DIRS)
      list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIRS})
@@ -186,7 +186,7 @@ if (VTK_FOUND)
        set (3RDPARTY_VTK_DLL_DIR "${3RDPARTY_VTK_DLL_DIR}" CACHE PATH "The directory containing VTK shared libraries" FORCE)
      endif()
    endif()
-#  endif()
+  endif()

 if (3RDPARTY_VTK_INCLUDE_DIR AND EXISTS "${3RDPARTY_VTK_INCLUDE_DIR}")
  list (APPEND 3RDPARTY_INCLUDE_DIRS ${3RDPARTY_VTK_INCLUDE_DIR})
@@ -198,14 +198,14 @@ if (BUILD_SHARED_LIBS)
  if (3RDPARTY_VTK_LIBRARY_DIR AND EXISTS "${3RDPARTY_VTK_LIBRARY_DIR}")
    list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIR})
  else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_VTK_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_LIBRARY_DIR)
  endif()

  if (WIN32)
    if (3RDPARTY_VTK_DLL_DIR OR EXISTS "${3RDPARTY_VTK_DLL_DIR}")
      list (APPEND 3RDPARTY_DLL_DIRS ${3RDPARTY_VTK_DLL_DIR})
    else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_VTK_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_DLL_DIR)
    endif()
  endif()
 endif()
--- a/adm/genconf.tcl
+++ b/adm/genconf.tcl
@@ -24,44 +24,21 @@
 # load tools
 source [file join [file dirname [info script]] genconfdeps.tcl]

-# proxy variable for implicit file path normalization
-set PRODUCTS_PATH_INPUT "$::PRODUCTS_PATH"
-
 package require Tk

 set aRowIter 0
 set aCheckRowIter 0
 frame .myFrame -padx 5 -pady 5
 pack  .myFrame -fill both -expand 1
-frame .myFrame.myPrjFrame
 frame .myFrame.myVsFrame
 frame .myFrame.myHxxChecks
 frame .myFrame.myChecks

-# project file format
-set SYS_PRJFMT_LIST {}
-set SYS_PRJNAME_LIST {}
-if { "$::tcl_platform(platform)" == "windows" } {
-  lappend ::SYS_PRJFMT_LIST "vcxproj"
-  lappend ::SYS_PRJNAME_LIST "Visual Studio (.vcxproj)"
-}
-if { "$tcl_platform(os)" == "Darwin" } {
-  lappend ::SYS_PRJFMT_LIST "xcd"
-  lappend ::SYS_PRJNAME_LIST "XCode (.xcd)"
-}
-lappend ::SYS_PRJFMT_LIST "cbp"
-lappend ::SYS_PRJNAME_LIST "Code Blocks (.cbp)"
-lappend ::SYS_PRJFMT_LIST "pro"
-lappend ::SYS_PRJNAME_LIST "Qt Creator (.pro)"
-
-set aPrjIndex [lsearch $::SYS_PRJFMT_LIST $::PRJFMT]
-set ::PRJNAME [lindex $::SYS_PRJNAME_LIST $aPrjIndex]
-
 set SYS_VS_LIST {}
 set SYS_VC_LIST {}
 set SYS_VCVARS_LIST {}

-# detect installed Visual Studio 2017+ instances by running vswhere.exe
+# detect installed Visual Studio 2017 instances by running vswhere.exe
 if { ! [catch {exec vswhere.exe -version "\[15.0,15.99\]" -latest -requires Microsoft.VisualStudio.Workload.NativeDesktop -property installationPath} res] } {
  lappend ::SYS_VS_LIST "Visual Studio 2017 (15, toolset v141)"
  lappend ::SYS_VC_LIST "vc141"
@@ -72,16 +49,6 @@ if { ! [catch {exec vswhere.exe -version "\[15.0,15.99\]" -latest -requires Micr
  lappend ::SYS_VC_LIST "vc141-uwp"
  lappend ::SYS_VCVARS_LIST "$res\\VC\\vcvarsall.bat"
 }
-if { ! [catch {exec vswhere.exe -version "\[16.0,16.99\]" -latest -requires Microsoft.VisualStudio.Workload.NativeDesktop -property installationPath} res] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2019 (16, toolset v142)"
-  lappend ::SYS_VC_LIST "vc142"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\vcvarsall.bat"
-}
-if { ! [catch {exec vswhere.exe -version "\[16.0,16.99\]" -latest -requires Microsoft.VisualStudio.Workload.Universal -property installationPath} res] } {
-  lappend ::SYS_VS_LIST "Visual Studio 2019 (16, toolset v142) UWP"
-  lappend ::SYS_VC_LIST "vc142-uwp"
-  lappend ::SYS_VCVARS_LIST "$res\\VC\\vcvarsall.bat"
-}

 # detect installed Visual Studio instances from global environment
 if { [info exists ::env(VS140COMNTOOLS)] } {
@@ -134,7 +101,6 @@ proc wokdep:gui:Close {} {
 }

 proc wokdep:gui:SwitchConfig {} {
-  set ::PRJFMT [lindex $::SYS_PRJFMT_LIST [.myFrame.myPrjFrame.myPrjCombo current]]
  set ::VCVER  [lindex $::SYS_VC_LIST     [.myFrame.myVsFrame.myVsCombo current]]
  set ::VCVARS [lindex $::SYS_VCVARS_LIST [.myFrame.myVsFrame.myVsCombo current]]

@@ -173,6 +139,9 @@ proc wokdep:gui:UpdateList {} {
  wokdep:SearchFreeType  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
  wokdep:SearchX11       anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
  if { "$::HAVE_GLES2" == "true" } {
+    if { "$::HAVE_GL2PS" == "true" } {
+      lappend anIncErrs "Error: gl2ps can not be used with OpenGL ES"
+    }
    wokdep:SearchEGL     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
    wokdep:SearchGLES    anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
  }
@@ -182,6 +151,9 @@ proc wokdep:gui:UpdateList {} {
  if { "$::HAVE_FFMPEG" == "true" } {
    wokdep:SearchFFmpeg  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
  }
+  if { "$::HAVE_GL2PS" == "true" } {
+    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "gl2ps" "gl2ps.h" "gl2ps" {"gl2ps"}
+  }
  if { "$::HAVE_TBB" == "true" } {
    wokdep:SearchTBB     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
  }
@@ -202,17 +174,6 @@ proc wokdep:gui:UpdateList {} {
    }
    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "liblzma" "lzma.h" "$aCheckLib" {"lzma" "xz"}
  }
-  if { "$::HAVE_E57" == "true" } {
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "e57" "e57/E57Foundation.h" "E57RefImpl" {"e57"}
-    set aCheckLib "xerces-c"
-    if { "$::tcl_platform(platform)" == "windows" } {
-      set aCheckLib "xerces-c_3"
-    }
-    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "xerces-c" "xercesc/sax2/XMLReaderFactory.hpp" "$aCheckLib" {"xerces"}
-  }
-  if { "$::HAVE_RAPIDJSON" == "true" } {
-    wokdep:SearchRapidJson anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
-  }

  if { "$::CHECK_QT4" == "true" } {
    wokdep:SearchQt4     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
@@ -236,9 +197,9 @@ proc wokdep:gui:BrowseVcVars {} {
 }

 proc wokdep:gui:BrowsePartiesRoot {} {
-  set aResult [tk_chooseDirectory -initialdir $::PRODUCTS_PATH_INPUT -title "Choose a directory"]
+  set aResult [tk_chooseDirectory -initialdir $::PRODUCTS_PATH -title "Choose a directory"]
  if { "$aResult" != "" } {
-    set ::PRODUCTS_PATH_INPUT $aResult
+    set ::PRODUCTS_PATH $aResult
    wokdep:gui:UpdateList
  }
 }
@@ -435,8 +396,6 @@ proc wokdep:gui:Show64Bitness { theRowIter } {
 }

 # Header
-ttk::label    .myFrame.myPrjFrame.myPrjLbl     -text "Project format:" -padding {5 5 20 5}
-ttk::combobox .myFrame.myPrjFrame.myPrjCombo   -values $SYS_PRJNAME_LIST -state readonly -textvariable PRJNAME -width 40
 ttk::label    .myFrame.myVsFrame.myVsLbl       -text "Visual Studio configuration:" -padding {5 5 20 5}
 ttk::combobox .myFrame.myVsFrame.myVsCombo     -values $SYS_VS_LIST -state readonly -textvariable VSVER -width 40
 ttk::combobox .myFrame.myVsFrame.myArchCombo   -values { {32} {64} } -textvariable ARCH -state readonly -width 6
@@ -452,10 +411,12 @@ ttk::label    .myFrame.myHxxChecks.myScutsLbl     -text "Strategy for filling he

 #
 ttk::label    .myFrame.mySrchLbl       -text "3rd-parties search path:" -padding {5 5 80 5}
-entry         .myFrame.mySrchEntry     -textvariable PRODUCTS_PATH_INPUT -width 80
+entry         .myFrame.mySrchEntry     -textvariable PRODUCTS_PATH -width 80
 ttk::button   .myFrame.mySrchBrowseBtn -text "Browse" -command wokdep:gui:BrowsePartiesRoot
 checkbutton   .myFrame.myChecks.myFImageCheck   -offvalue "false" -onvalue "true" -variable HAVE_FREEIMAGE -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myFImageLbl     -text "Use FreeImage"
+checkbutton   .myFrame.myChecks.myGl2psCheck    -offvalue "false" -onvalue "true" -variable HAVE_GL2PS     -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myGl2psLbl      -text "Use GL2PS"
 checkbutton   .myFrame.myChecks.myTbbCheck      -offvalue "false" -onvalue "true" -variable HAVE_TBB       -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myTbbLbl        -text "Use Intel TBB"
 if { "$::tcl_platform(os)" != "Darwin" } {
@@ -470,9 +431,6 @@ checkbutton   .myFrame.myChecks.myFFmpegCheck   -offvalue "false" -onvalue "true
 ttk::label    .myFrame.myChecks.myFFmpegLbl     -text "Use FFmpeg"
 #checkbutton   .myFrame.myChecks.myOpenClCheck   -offvalue "false" -onvalue "true" -variable HAVE_OPENCL    -command wokdep:gui:UpdateList
 #ttk::label    .myFrame.myChecks.myOpenClLbl     -text "Use OpenCL"
-checkbutton   .myFrame.myChecks.myRapidJsonCheck -offvalue "false" -onvalue "true" -variable HAVE_RAPIDJSON -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myRapidJsonLbl   -text "Use RapidJSON"
-
 checkbutton   .myFrame.myChecks.myMacGLXCheck   -offvalue "false" -onvalue "true" -variable MACOSX_USE_GLX
 ttk::label    .myFrame.myChecks.myMacGLXLbl     -text "Use X11 for windows drawing"
 ttk::label    .myFrame.myChecks.myVtkLbl        -text "Use VTK"
@@ -482,8 +440,6 @@ checkbutton   .myFrame.myChecks.myZLibCheck     -offvalue "false" -onvalue "true
 ttk::label    .myFrame.myChecks.myZLibLbl       -text "Use zlib"
 checkbutton   .myFrame.myChecks.myLzmaCheck     -offvalue "false" -onvalue "true" -variable HAVE_LIBLZMA   -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myLzmaLbl       -text "Use liblzma"
-checkbutton   .myFrame.myChecks.myE57Check      -offvalue "false" -onvalue "true" -variable HAVE_E57       -command wokdep:gui:UpdateList
-ttk::label    .myFrame.myChecks.myE57Lbl        -text "Use E57"

 checkbutton   .myFrame.myChecks.myQt4Check      -offvalue "false" -onvalue "true" -variable CHECK_QT4      -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myQt4Lbl        -text "Search Qt4"
@@ -546,10 +502,6 @@ ttk::button   .myFrame.myClose -text "Close" -command wokdep:gui:Close

 # Create grid
 # Header
-grid .myFrame.myPrjFrame            -row $aRowIter -column 0 -columnspan 10 -sticky w
-grid .myFrame.myPrjFrame.myPrjLbl   -row 0 -column 0
-grid .myFrame.myPrjFrame.myPrjCombo -row 0 -column 1
-incr aRowIter
 if { "$tcl_platform(platform)" == "windows" } {
  grid .myFrame.myVsFrame               -row $aRowIter -column 0 -columnspan 10 -sticky w
  grid .myFrame.myVsFrame.myVsLbl       -row 0 -column 0
@@ -593,8 +545,11 @@ if { "$::tcl_platform(os)" != "Darwin" } {
 grid .myFrame.myChecks.myZLibCheck     -row $aCheckRowIter -column 6 -sticky e
 grid .myFrame.myChecks.myZLibLbl       -row $aCheckRowIter -column 7 -sticky w

-grid .myFrame.myChecks.myQt4Check      -row $aCheckRowIter -column 12 -sticky e
-grid .myFrame.myChecks.myQt4Lbl        -row $aCheckRowIter -column 13 -sticky w
+grid .myFrame.myChecks.myGl2psCheck    -row $aCheckRowIter -column 8 -sticky e
+grid .myFrame.myChecks.myGl2psLbl      -row $aCheckRowIter -column 9 -sticky w
+
+grid .myFrame.myChecks.myQt4Check      -row $aCheckRowIter -column 10 -sticky e
+grid .myFrame.myChecks.myQt4Lbl        -row $aCheckRowIter -column 11 -sticky w

 incr aCheckRowIter
 grid .myFrame.myChecks.myFFmpegCheck   -row $aCheckRowIter -column 0 -sticky e
@@ -604,22 +559,18 @@ grid .myFrame.myChecks.myVtkLbl        -row $aCheckRowIter -column 3 -sticky w
 if { "$::tcl_platform(platform)" == "windows" } {
  grid .myFrame.myChecks.myD3dCheck    -row $aCheckRowIter -column 4 -sticky e
  grid .myFrame.myChecks.myD3dLbl      -row $aCheckRowIter -column 5 -sticky w
-} elseif { "$::tcl_platform(os)" == "Darwin" } {
-  grid .myFrame.myChecks.myMacGLXCheck -row $aCheckRowIter -column 4 -sticky e
-  grid .myFrame.myChecks.myMacGLXLbl   -row $aCheckRowIter -column 5 -sticky w
 }
 grid .myFrame.myChecks.myLzmaCheck     -row $aCheckRowIter -column 6 -sticky e
 grid .myFrame.myChecks.myLzmaLbl       -row $aCheckRowIter -column 7 -sticky w
-grid .myFrame.myChecks.myJDKCheck      -row $aCheckRowIter -column 12 -sticky e
-grid .myFrame.myChecks.myJDKLbl        -row $aCheckRowIter -column 13 -sticky w
-
-incr aCheckRowIter
-grid .myFrame.myChecks.myRapidJsonCheck -row $aCheckRowIter -column 0 -sticky e
-grid .myFrame.myChecks.myRapidJsonLbl   -row $aCheckRowIter -column 1 -sticky w
-grid .myFrame.myChecks.myE57Check      -row $aCheckRowIter -column 6 -sticky e
-grid .myFrame.myChecks.myE57Lbl        -row $aCheckRowIter -column 7 -sticky w
+grid .myFrame.myChecks.myJDKCheck      -row $aCheckRowIter -column 10 -sticky e
+grid .myFrame.myChecks.myJDKLbl        -row $aCheckRowIter -column 11 -sticky w

 incr aCheckRowIter
+if { "$::tcl_platform(os)" == "Darwin" } {
+  grid .myFrame.myChecks.myMacGLXCheck -row $aCheckRowIter -column 0 -sticky e
+  grid .myFrame.myChecks.myMacGLXLbl   -row $aCheckRowIter -column 1 -sticky w
+  incr aCheckRowIter
+}

 # Additional headers search paths
 grid .myFrame.myIncLbl    -row $aRowIter -column 0 -columnspan 10 -sticky w
@@ -652,9 +603,6 @@ grid .myFrame.mySave  -row $aRowIter -column 4 -columnspan 2
 grid .myFrame.myClose -row $aRowIter -column 6 -columnspan 2

 # Bind events
-bind .myFrame.myPrjFrame.myPrjCombo <<ComboboxSelected>> {
-  wokdep:gui:SwitchConfig
-}
 bind .myFrame.myVsFrame.myVsCombo <<ComboboxSelected>> {
  wokdep:gui:SwitchConfig
 }
@@ -663,7 +611,6 @@ bind .myFrame.myVsFrame.myArchCombo <<ComboboxSelected>> {
 }

 .myFrame.mySrchEntry configure -validate all -validatecommand {
-  set ::PRODUCTS_PATH [file normalize "$::PRODUCTS_PATH_INPUT"]
  #return [file exists "$::PRODUCTS_PATH"]
  wokdep:gui:UpdateList
  return 1
--- a/adm/genconfdeps.tcl
+++ b/adm/genconfdeps.tcl
@@ -27,10 +27,8 @@ if { "$tcl_platform(platform)" == "unix" } {
  set SYS_EXE_SUFFIX    ""
  if { "$tcl_platform(os)" == "Darwin" } {
    set SYS_LIB_SUFFIX "dylib"
-    set PRJFMT "xcd"
  } else {
    set SYS_LIB_SUFFIX "so"
-    set PRJFMT "cbp"
  }
  set VCVER "gcc"
  set VCVARS ""
@@ -41,7 +39,6 @@ if { "$tcl_platform(platform)" == "unix" } {
  set SYS_EXE_SUFFIX    ".exe"
  set VCVER  "vc10"
  set VCVARS ""
-  set PRJFMT "vcxproj"
 }

 set SHORTCUT_HEADERS "ShortCut"
@@ -68,7 +65,7 @@ if { [info exists ::env(SHORTCUT_HEADERS)] } {
 }

 # fetch environment variables (e.g. set by custom.sh or custom.bat) and set them as tcl variables with the same name
-set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_ZLIB HAVE_LIBLZMA HAVE_E57 HAVE_RAPIDJSON HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
+set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_GL2PS HAVE_ZLIB HAVE_LIBLZMA HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
 foreach anEnvIter $THE_ENV_VARIABLES {
  set ${anEnvIter} "false"
  if { [info exists ::env(${anEnvIter})] } {
@@ -85,14 +82,11 @@ if { "$tcl_platform(platform)" != "windows" } {
  set HAVE_D3D ""
  set HAVE_RelWithDebInfo ""
 }
-foreach anEnvIter {ARCH VCVER VCVARS PRJFMT } {
+foreach anEnvIter {ARCH VCVER VCVARS PRODUCTS_PATH} {
  if { [info exists ::env(${anEnvIter})] } {
    set ${anEnvIter} "$::env(${anEnvIter})"
  }
 }
-if { [info exists ::env(PRODUCTS_PATH)] } {
-  set PRODUCTS_PATH [file normalize "$::env(PRODUCTS_PATH)"]
-}

 if { [info exists ::env(CSF_OPT_INC)] } {
  set CSF_OPT_INC [split "$::env(CSF_OPT_INC)" $::SYS_PATH_SPLITTER]
@@ -146,12 +140,9 @@ proc wokdep:SearchHeader {theHeader} {
 # Search library file in $::CSF_OPT_LIB* and standard paths
 proc wokdep:SearchLib {theLib theBitness {theSearchPath ""}} {
  if { "$theSearchPath" != "" } {
-    set aPath  "${theSearchPath}/${::SYS_LIB_PREFIX}${theLib}.${::SYS_LIB_SUFFIX}"
-    set aPath2 "${theSearchPath}/${::SYS_LIB_PREFIX}${theLib}.a"
+    set aPath "${theSearchPath}/${::SYS_LIB_PREFIX}${theLib}.${::SYS_LIB_SUFFIX}"
    if { [file exists "$aPath"] } {
      return "$aPath"
-    } elseif { "$::tcl_platform(platform)" != "windows" && [file exists "$aPath2"] } {
-      return "$aPath2"
    } else {
      return ""
    }
@@ -159,42 +150,31 @@ proc wokdep:SearchLib {theLib theBitness {theSearchPath ""}} {

  # search in custom paths
  foreach aLibPath [set ::CSF_OPT_LIB$theBitness] {
-    set aPath  "${aLibPath}/${::SYS_LIB_PREFIX}${theLib}.${::SYS_LIB_SUFFIX}"
-    set aPath2 "${aLibPath}/${::SYS_LIB_PREFIX}${theLib}.a"
+    set aPath "${aLibPath}/${::SYS_LIB_PREFIX}${theLib}.${::SYS_LIB_SUFFIX}"
    if { [file exists "$aPath"] } {
      return "$aPath"
-    } elseif { "$::tcl_platform(platform)" != "windows" && [file exists "$aPath2"] } {
-      return "$aPath2"
    }
  }

  # search in system
  if { "$::ARCH" == "$theBitness"} {
-    set aPath  "/usr/lib/${::SYS_LIB_PREFIX}${theLib}.${::SYS_LIB_SUFFIX}"
-    set aPath2 "/usr/lib/${::SYS_LIB_PREFIX}${theLib}.a"
+    set aPath "/usr/lib/${::SYS_LIB_PREFIX}${theLib}.${::SYS_LIB_SUFFIX}"
    if { [file exists "$aPath"] } {
      return "$aPath"
-    } elseif { [file exists "$aPath2"] } {
-      return "$aPath2"
    }
  }

+
  if { "$::tcl_platform(os)" == "Linux" } {
    if { "$theBitness" == "64" } {
-      set aPath  "/usr/lib/x86_64-linux-gnu/lib${theLib}.so"
-      set aPath2 "/usr/lib/x86_64-linux-gnu/lib${theLib}.a"
+      set aPath "/usr/lib/x86_64-linux-gnu/lib${theLib}.so"
      if { [file exists "$aPath"] } {
        return "$aPath"
-      } elseif { [file exists "$aPath2"] } {
-        return "$aPath2"
      }
    } else {
-      set aPath  "/usr/lib/i386-linux-gnu/lib${theLib}.so"
-      set aPath2 "/usr/lib/i386-linux-gnu/lib${theLib}.a"
+      set aPath "/usr/lib/i386-linux-gnu/lib${theLib}.so"
      if { [file exists "$aPath"] } {
        return "$aPath"
-      } elseif { [file exists "$aPath2"] } {
-        return "$aPath2"
      }
    }
  }
@@ -875,25 +855,6 @@ proc wokdep:SearchGLES {theErrInc theErrLib32 theErrLib64 theErrBin32 theErrBin6
  return "$isFound"
 }

-# Search RapidJSON headers
-proc wokdep:SearchRapidJson {theErrInc theErrLib32 theErrLib64 theErrBin32 theErrBin64} {
-  upvar $theErrInc anErrInc
-
-  set isFound "true"
-  set aRJHPath [wokdep:SearchHeader "rapidjson/rapidjson.h"]
-  if { "$aRJHPath"  == "" } {
-    set aPath [wokdep:Preferred [glob -nocomplain -directory "$::PRODUCTS_PATH" -type d *{rapidjson}*] "$::VCVER" "$::ARCH" ]
-    if { "$aPath" != "" && [file exists "$aPath/include/rapidjson/rapidjson.h"] } {
-      lappend ::CSF_OPT_INC "$aPath/include"
-    } else {
-      lappend anErrInc "Error: 'rapidjson/rapidjson.h' not found (RapidJSON)"
-      set isFound "false"
-    }
-  }
-
-  return "$isFound"
-}
-
 # Auxiliary function, gets VTK version to set default search directory
 proc wokdep:VtkVersion { thePath } {
  set aResult "6.1"
@@ -1157,33 +1118,15 @@ proc wokdep:SearchX11 {theErrInc theErrLib32 theErrLib64 theErrBin32 theErrBin64
  return "$isFound"
 }

-# Returns OCCT version string from file Standard_Version.hxx (if available)
-proc wokdep:DetectCasVersion {} {
-  set occt_ver 7.0.0
-  set aCasRoot [file normalize [file dirname [info script]]]
-  set filename "${aCasRoot}/src/Standard/Standard_Version.hxx"
-  if { [file exists $filename] } {
-    set fh [open $filename "r"]
-    set fh_loaded [read $fh]
-    close $fh
-    regexp {[^/]\s*#\s*define\s+OCC_VERSION_COMPLETE\s+\"([^\s]*)\"} $fh_loaded dummy occt_ver
-  } else {
-    puts "Error: file '$filename' not found"
-  }
-  return $occt_ver
-}
-
 # Generate (override) custom environment file
 proc wokdep:SaveCustom {} {
-  set aGenInfo "This environment file was generated by genconf.tcl script at [clock format [clock seconds] -format "%Y.%m.%d %H:%M"]"
  if { "$::tcl_platform(platform)" == "windows" } {
    set aCustomFilePath "./custom.bat"
    set aFile [open $aCustomFilePath "w"]
    puts $aFile "@echo off"
-    puts $aFile "rem $aGenInfo"
+    puts $aFile "rem This environment file was generated by wok_depsgui.tcl script at [clock format [clock seconds] -format "%Y.%m.%d %H:%M"]"

    puts $aFile ""
-    puts $aFile "set PRJFMT=$::PRJFMT"
    puts $aFile "set VCVER=$::VCVER"
    puts $aFile "set ARCH=$::ARCH"
    puts $aFile "set VCVARS=$::VCVARS"
@@ -1203,41 +1146,26 @@ proc wokdep:SaveCustom {} {
    }

    set aStringInc [join $::CSF_OPT_INC $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringInc [regsub -all "$::PRODUCTS_PATH" $aStringInc "%PRODUCTS_PATH%"]
-    }
    puts $aFile ""
    puts $aFile "rem Additional headers search paths"
    puts $aFile "set \"CSF_OPT_INC=$aStringInc\""

    set aStringLib32 [join $::CSF_OPT_LIB32 $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringLib32 [regsub -all "$::PRODUCTS_PATH" $aStringLib32 "%PRODUCTS_PATH%"]
-    }
    puts $aFile ""
    puts $aFile "rem Additional libraries (32-bit) search paths"
    puts $aFile "set \"CSF_OPT_LIB32=$aStringLib32\""

    set aStringLib64 [join $::CSF_OPT_LIB64 $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringLib64 [regsub -all "$::PRODUCTS_PATH" $aStringLib64 "%PRODUCTS_PATH%"]
-    }
    puts $aFile ""
    puts $aFile "rem Additional libraries (64-bit) search paths"
    puts $aFile "set \"CSF_OPT_LIB64=$aStringLib64\""

    set aStringBin32 [join $::CSF_OPT_BIN32 $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringBin32 [regsub -all "$::PRODUCTS_PATH" $aStringBin32 "%PRODUCTS_PATH%"]
-    }
    puts $aFile ""
    puts $aFile "rem Additional (32-bit) search paths"
    puts $aFile "set \"CSF_OPT_BIN32=$aStringBin32\""

    set aStringBin64 [join $::CSF_OPT_BIN64 $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringBin64 [regsub -all "$::PRODUCTS_PATH" $aStringBin64 "%PRODUCTS_PATH%"]
-    }
    puts $aFile ""
    puts $aFile "rem Additional (64-bit) search paths"
    puts $aFile "set \"CSF_OPT_BIN64=$aStringBin64\""
@@ -1247,10 +1175,9 @@ proc wokdep:SaveCustom {} {
    set aCustomFilePath "./custom.sh"
    set aFile [open $aCustomFilePath "w"]
    puts $aFile "#!/bin/bash"
-    puts $aFile "# $aGenInfo"
+    puts $aFile "# This environment file was generated by wok_depsgui.tcl script at [clock format [clock seconds] -format "%Y.%m.%d %H:%M"]"

    puts $aFile ""
-    puts $aFile "export PRJFMT=$::PRJFMT"
    puts $aFile "export ARCH=$::ARCH"
    puts $aFile "export SHORTCUT_HEADERS=$::SHORTCUT_HEADERS"

@@ -1268,88 +1195,22 @@ proc wokdep:SaveCustom {} {
    }

    set aStringInc [join $::CSF_OPT_INC $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringInc [regsub -all "$::PRODUCTS_PATH" $aStringInc "\${PRODUCTS_PATH}"]
-    }
    puts $aFile ""
    puts $aFile "# Additional headers search paths"
    puts $aFile "export CSF_OPT_INC=\"$aStringInc\""

-    set aStringLib [join [set ::CSF_OPT_LIB$::ARCH] $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringLib [regsub -all "$::PRODUCTS_PATH" $aStringLib "\${PRODUCTS_PATH}"]
-    }
+    set aStringLib$::ARCH [join [set ::CSF_OPT_LIB$::ARCH] $::SYS_PATH_SPLITTER]
    puts $aFile ""
    puts $aFile "# Additional libraries ($::ARCH-bit) search paths"
-    puts $aFile "export CSF_OPT_LIB$::ARCH=\"[set aStringLib]\""
+    puts $aFile "export CSF_OPT_LIB$::ARCH=\"[set aStringLib$::ARCH]\""

-    set aStringBin [join [set ::CSF_OPT_BIN$::ARCH] $::SYS_PATH_SPLITTER]
-    if { "$::PRODUCTS_PATH" != "" } {
-      set aStringBin [regsub -all "$::PRODUCTS_PATH" $aStringBin "\${PRODUCTS_PATH}"]
-    }
+    set aStringBin$::ARCH [join [set ::CSF_OPT_BIN$::ARCH] $::SYS_PATH_SPLITTER]
    puts $aFile ""
    puts $aFile "# Additional ($::ARCH-bit) search paths"
-    puts $aFile "export CSF_OPT_BIN$::ARCH=\"[set aStringBin]\""
+    puts $aFile "export CSF_OPT_BIN$::ARCH=\"[set aStringBin$::ARCH]\""

    close $aFile
  }
+
  puts "Configuration saved to file '$aCustomFilePath'"
-
-  # generate custom.auto.pri
-  set toExportCustomPri 1
-  if { $toExportCustomPri == 1 } {
-    set aCasVer [wokdep:DetectCasVersion]
-    set aCustomFilePath "./adm/qmake/custom.auto.pri"
-    set aFile [open $aCustomFilePath "w"]
-    puts $aFile "# $aGenInfo"
-
-    puts $aFile ""
-    puts $aFile "VERSION=$aCasVer"
-    puts $aFile "PRODUCTS_PATH=\"$::PRODUCTS_PATH\""
-
-    puts $aFile ""
-    puts $aFile "# Optional 3rd-parties switches"
-    foreach anEnvIter $::THE_ENV_VARIABLES {
-      set aName ${anEnvIter}
-      set aValue [set ::${anEnvIter}]
-      if { "$aValue" == "true" } {
-        puts $aFile "CONFIG += ${aName}"
-      } else {
-        #puts $aFile "CONFIG -= ${aName}"
-      }
-    }
-
-    puts $aFile ""
-    puts $aFile "# Additional headers search paths"
-    foreach anIncPath $::CSF_OPT_INC {
-      if { "$::PRODUCTS_PATH" != "" } {
-        set anIncPath [regsub -all "$::PRODUCTS_PATH" $anIncPath "\$\$\{PRODUCTS_PATH\}"]
-      }
-      puts $aFile "INCLUDEPATH += \"${anIncPath}\""
-    }
-
-    puts $aFile ""
-    puts $aFile "# Additional libraries search paths"
-    foreach aLibPath [set ::CSF_OPT_LIB$::ARCH] {
-      if { "$::PRODUCTS_PATH" != "" } {
-        set aLibPath [regsub -all "$::PRODUCTS_PATH" $aLibPath "\$\$\{PRODUCTS_PATH\}"]
-      }
-      puts $aFile "LIBS += -L\"${aLibPath}\""
-    }
-
-    if { "$::tcl_platform(platform)" == "windows" } {
-      puts $aFile ""
-      puts $aFile "# Additional DLLs search paths"
-      foreach aDllPath [set ::CSF_OPT_BIN$::ARCH] {
-        if { "$::PRODUCTS_PATH" != "" } {
-          set aDllPath [regsub -all "$::PRODUCTS_PATH" $aDllPath "\$\$\{PRODUCTS_PATH\}"]
-        }
-        puts $aFile "LIBS += -L\"${aDllPath}\""
-      }
-    }
-
-    puts $aFile ""
-    close $aFile
-    puts "Configuration saved to file '$aCustomFilePath'"
-  }
 }
--- a/adm/genproj.tcl
+++ b/adm/genproj.tcl
@@ -256,7 +256,7 @@ proc genAllResources {} {

 # Wrapper-function to generate VS project files
 proc genproj {theFormat args} {
-  set aSupportedFormats { "vc7" "vc8" "vc9" "vc10" "vc11" "vc12" "vc14" "vc141" "vc142" "cbp" "xcd" "pro"}
+  set aSupportedFormats { "vc7" "vc8" "vc9" "vc10" "vc11" "vc12" "vc14" "vc141" "cbp" "xcd"}
  set aSupportedPlatforms { "wnt" "uwp" "lin" "mac" "ios" "qnx" }
  set isHelpRequire false

@@ -284,12 +284,8 @@ proc genproj {theFormat args} {

  # Check optional arguments
  set aLibType "dynamic"
-  set aSolution "OCCT"
-  for {set anArgIter 0} {$anArgIter < [llength args]} {incr anArgIter} {
-    set arg [lindex $args $anArgIter]
-    if { $arg == "" } {
-      continue
-    } elseif { $arg == "-h" || $arg == "-help" || $arg == "--help" } {
+  foreach arg $args {
+    if { $arg == "-h" || $arg == "-help" || $arg == "--help" } {
      set isHelpRequire true
    } elseif { [lsearch -exact $aSupportedPlatforms $arg] >= 0 } {
      set aPlatform $arg
@@ -299,9 +295,6 @@ proc genproj {theFormat args} {
    } elseif { $arg == "-dynamic" } {
      set aLibType "dynamic"
      puts "Dynamic build has been selected"
-    } elseif { $arg == "-solution" } {
-      incr anArgIter
-      set aSolution [lindex $args $anArgIter]
    } else {
      puts "Error: genproj: unrecognized option \"$arg\""
      set isHelpRequire true
@@ -319,10 +312,8 @@ proc genproj {theFormat args} {
      vc12     -  Visual Studio 2013
      vc14     -  Visual Studio 2015
      vc141    -  Visual Studio 2017
-      vc142    -  Visual Studio 2019
      cbp      -  CodeBlocks
      xcd      -  XCode
-      pro      -  Qt Creator

    Platform (optional):
      wnt   -  Windows Desktop
@@ -347,9 +338,9 @@ proc genproj {theFormat args} {
  # base path to where to generate projects, hardcoded from current dir
  set anAdmPath [file normalize "${::path}/adm"]

-  OS:MKPRC "$anAdmPath" "$theFormat" "$aLibType" "$aPlatform" "$aCmpl" "$aSolution"
+  OS:MKPRC "$anAdmPath" "$theFormat" "$aLibType" "$aPlatform" "$aCmpl"

-  genprojbat "$theFormat" "$aPlatform" "$aSolution"
+  genprojbat "$theFormat" "$aPlatform"
  genAllResources
 }

@@ -369,8 +360,7 @@ proc copy_with_warning {from to} {
  file copy -force -- "$from" "$to"
 }

-# Generate auxiliary scripts for launching IDE.
-proc genprojbat {theFormat thePlatform theSolution} {
+proc genprojbat {theFormat thePlatform} {
  set aTargetPlatformExt sh
  if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
    set aTargetPlatformExt bat
@@ -398,36 +388,20 @@ proc genprojbat {theFormat thePlatform theSolution} {
    copy_with_warning "$::THE_CASROOT/adm/templates/draw.${aTargetPlatformExt}" "$::path/draw.${aTargetPlatformExt}"
  }

-  set aSolShList ""
  if { [regexp {^vc} $theFormat] } {
-    set aSolShList "msvc.bat"
+    copy_with_warning "$::THE_CASROOT/adm/templates/msvc.bat" "$::path/msvc.bat"
  } else {
    switch -exact -- "$theFormat" {
-      "cbp" {
-        set aSolShList { "codeblocks.sh" "codeblocks.bat" }
+      "cbp"   {
+        file copy -force -- "$::THE_CASROOT/adm/templates/codeblocks.sh"  "$::path/codeblocks.sh"
+        file copy -force -- "$::THE_CASROOT/adm/templates/codeblocks.bat" "$::path/codeblocks.bat"
        # Code::Blocks 16.01 does not create directory for import libs, help him
-        set aPlatformAndCompiler "${thePlatform}/gcc"
-        if { "$thePlatform" == "mac" || "$thePlatform" == "ios" } {
-          set aPlatformAndCompiler "${thePlatform}/clang"
-        }
-        file mkdir "$::path/${aPlatformAndCompiler}/lib"
-        file mkdir "$::path/${aPlatformAndCompiler}/libd"
+        file mkdir "$::path/$thePlatform/cbp/lib"
+        file mkdir "$::path/$thePlatform/cbp/libd"
      }
-      "xcd" { set aSolShList "xcode.sh" }
+      "xcd"   { file copy -force -- "$::THE_CASROOT/adm/templates/xcode.sh"      "$::path/xcode.sh" }
    }
  }
-
-  foreach aSolSh $aSolShList {
-    set anShFile [open "$::THE_CASROOT/adm/templates/${aSolSh}" "r"]
-    set anShTmpl [read $anShFile]
-    close $anShFile
-
-    regsub -all -- {__SOLUTION__} $anShTmpl "$theSolution" anShTmpl
-
-    set anShFile [open "$::path/${aSolSh}" "w"]
-    puts $anShFile $anShTmpl
-    close $anShFile
-  }
 }

 ###### MSVC #############################################################33
@@ -448,8 +422,7 @@ set THE_GUIDS_LIST($aTKNullKey) "{00000000-0000-0000-0000-000000000000}"
 # @param theLibType  Library type - dynamic or static
 # @param thePlatform Optional target platform for cross-compiling, e.g. ios for iOS
 # @param theCmpl     Compiler option (msvc or gcc)
-# @param theSolution Solution name
-proc OS:MKPRC { theOutDir theFormat theLibType thePlatform theCmpl theSolution } {
+proc OS:MKPRC { theOutDir theFormat theLibType thePlatform theCmpl } {
  global path
  set anOutRoot $theOutDir
  if { $anOutRoot == "" } {
@@ -499,6 +472,15 @@ proc OS:MKPRC { theOutDir theFormat theLibType thePlatform theCmpl theSolution }
    }
  }

+  # generate one solution for all projects if complete OS or VAS is processed
+  set anAllSolution "OCCT"
+
+  wokUtils:FILES:mkdir $anOutDir
+  if { ![file exists $anOutDir] } {
+    puts stderr "Error: Could not create output directory \"$anOutDir\""
+    return
+  }
+
  # create the out dir if it does not exist
  if (![file isdirectory $path/inc]) {
    puts "$path/inc folder does not exists and will be created"
@@ -509,16 +491,6 @@ proc OS:MKPRC { theOutDir theFormat theLibType thePlatform theCmpl theSolution }
  puts "Collecting required header files into $path/inc ..."
  osutils:collectinc $aModules $path/inc

-  if { "$theFormat" == "pro" } {
-    return
-  }
-
-  wokUtils:FILES:mkdir $anOutDir
-  if { ![file exists $anOutDir] } {
-    puts stderr "Error: Could not create output directory \"$anOutDir\""
-    return
-  }
-
  # Generating project files for the selected format
  switch -exact -- "$theFormat" {
    "vc7"   -
@@ -528,12 +500,11 @@ proc OS:MKPRC { theOutDir theFormat theLibType thePlatform theCmpl theSolution }
    "vc11"  -
    "vc12"  -
    "vc14"  -
-    "vc141" -
-    "vc142"    { OS:MKVC  $anOutDir $aModules $theSolution $theFormat $isUWP}
-    "cbp"      { OS:MKCBP $anOutDir $aModules $theSolution $thePlatform $theCmpl }
+    "vc141"    { OS:MKVC  $anOutDir $aModules $anAllSolution $theFormat $isUWP}
+    "cbp"      { OS:MKCBP $anOutDir $aModules $anAllSolution $thePlatform $theCmpl }
    "xcd"      {
      set ::THE_GUIDS_LIST($::aTKNullKey) "000000000000000000000000"
-      OS:MKXCD $anOutDir $aModules $theSolution $theLibType $thePlatform
+      OS:MKXCD $anOutDir $aModules $anAllSolution $theLibType $thePlatform
    }
  }

@@ -953,7 +924,7 @@ proc osutils:collectinc {theModules theIncPath} {
  set anIncFiles [glob -tails -nocomplain -dir ${anIncPath} "*"]
  foreach anIncFile ${anIncFiles} {
    if { [lsearch -exact ${allHeaderFiles} ${anIncFile}] == -1 } {
-      puts "Warning: file ${anIncPath}/${anIncFile} is not present in the sources and will be removed from ${theIncPath}"
+      puts "Warning: file ${anIncPath}/${anIncFile} is not presented in the sources and will be removed from ${theIncPath}!"
      file delete -force "${theIncPath}/${anIncFile}"
    }
  }
@@ -984,7 +955,7 @@ proc osutils:vcsolution:header { vcversion } {
    append var \
      "Microsoft Visual Studio Solution File, Format Version 12.00\n" \
      "# Visual Studio 2013\n"
-  } elseif { "$vcversion" == "vc14" || "$vcversion" == "vc141" || "$vcversion" == "vc142" } {
+  } elseif { "$vcversion" == "vc14"  || "$vcversion" == "vc141"} {
    append var \
      "Microsoft Visual Studio Solution File, Format Version 12.00\n" \
      "# Visual Studio 14\n"
@@ -1222,9 +1193,6 @@ proc osutils:vcproj:readtemplate {theVcVer isUWP isExec} {
  if { $theVcVer == "vc141" } {
    set aVCRTVer "vc14"
    set aToolset "v141"
-  } elseif { $theVcVer == "vc142" } {
-    set aVCRTVer "vc14"
-    set aToolset "v142"
  }

  set what "$theVcVer"
@@ -1295,16 +1263,12 @@ proc wokUtils:FILES:FileToString { fin } {

 # List extensions of compilable files in OCCT
 proc osutils:compilable {thePlatform} {
-  if { "$thePlatform" == "mac" || "$thePlatform" == "ios" } { return [list .c .cxx .cpp .mm] }
+  if { "$thePlatform" == "mac" || "$thePlatform" == "ios" } {
+    return [list .c .cxx .cpp .mm]
+  }
  return [list .c .cxx .cpp]
 }

-# List extensions of header file in OCCT
-proc osutils:fileExtensionsHeaders {thePlatform} {
-  if { "$thePlatform" == "mac" || "$thePlatform" == "ios" } { return [list .h .hxx .hpp .lxx .pxx .gxx ] }
-  return [list .h .hxx .hpp .lxx .pxx .gxx .mm ]
-}
-
 proc osutils:commonUsedTK { theToolKit } {
  set anUsedToolKits [list]
  set aDepToolkits [LibToLink $theToolKit]
@@ -1354,6 +1318,9 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
  if { "$::HAVE_FFMPEG" == "true" } {
    set aLibsMap(CSF_FFmpeg) "avcodec avformat swscale avutil"
  }
+  if { "$::HAVE_GL2PS" == "true" } {
+    set aLibsMap(CSF_GL2PS) "gl2ps"
+  }
  if { "$::HAVE_TBB" == "true" } {
    set aLibsMap(CSF_TBB) "tbb tbbmalloc"
  }
@@ -1370,11 +1337,6 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
  if { "$::HAVE_LIBLZMA" == "true" } {
    set aLibsMap(CSF_LIBLZMA) "liblzma"
  }
-  if { "$::HAVE_E57" == "true" && "$theOS" != "wnt" } {
-    # exclude wnt, as there are different pragma lib depending on debug/release
-    set aLibsMap(CSF_E57)    "E57RefImpl"
-    set aLibsMap(CSF_xerces) "xerces-c"
-  }

  if { "$theOS" == "wnt" } {
    #  WinAPI libraries
@@ -1382,11 +1344,9 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
    set aLibsMap(CSF_advapi32)     "advapi32"
    set aLibsMap(CSF_gdi32)        "gdi32"
    set aLibsMap(CSF_user32)       "user32 comdlg32"
-    set aLibsMap(CSF_shell32)      "shell32"
    set aLibsMap(CSF_opengl32)     "opengl32"
    set aLibsMap(CSF_wsock32)      "wsock32"
    set aLibsMap(CSF_netapi32)     "netapi32"
-    set aLibsMap(CSF_winmm)        "winmm"
    set aLibsMap(CSF_OpenGlLibs)   "opengl32"
    if { "$::HAVE_GLES2" == "true" } {
      set aLibsMap(CSF_OpenGlLibs) "libEGL libGLESv2"
@@ -1404,23 +1364,17 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
    set aLibsMap(CSF_TBB) ""
  } else {
    set aLibsMap(CSF_dl)           "dl"
-    if { "$theOS" == "mac" || "$theOS" == "ios" } {
+    if { "$theOS" == "mac" } {
      set aLibsMap(CSF_objc)       "objc"
-      if { "$theOS" == "ios" } {
-        set aFrmsMap(CSF_Appkit)     "UIKit"
-        set aFrmsMap(CSF_OpenGlLibs) "OpenGLES"
-      } else {
-        set aFrmsMap(CSF_Appkit)     "AppKit"
-        set aFrmsMap(CSF_OpenGlLibs) "OpenGL"
-      }
+      set aFrmsMap(CSF_Appkit)     "Appkit"
      set aFrmsMap(CSF_IOKit)      "IOKit"
+      set aFrmsMap(CSF_OpenGlLibs) "OpenGL"
      set aFrmsMap(CSF_TclLibs)    "Tcl"
      set aLibsMap(CSF_TclLibs)    ""
      set aFrmsMap(CSF_TclTkLibs)  "Tk"
      set aLibsMap(CSF_TclTkLibs)  ""
      set aLibsMap(CSF_QT)         "QtCore QtGui"
    } else {
-      set aLibsMap(CSF_fontconfig) "fontconfig"
      if { "$theOS" == "qnx" } {
        # CSF_ThreadLibs - pthread API is part of libc on QNX
        set aLibsMap(CSF_OpenGlLibs) "EGL GLESv2"
@@ -1514,7 +1468,8 @@ proc osutils:tk:units { tkloc } {
 }

 proc osutils:justwnt { listloc } {
-  set goaway [list Xw]
+  # ImageUtility is required for support for old (<6.5.4) versions of OCCT
+  set goaway [list Xdps Xw  ImageUtility WOKUnix]
  return [osutils:juststation $goaway $listloc]
 }

@@ -1604,28 +1559,31 @@ proc wokUtils:FILES:wtail { f n } {
 }

 # Generate entry for one source file in Visual Studio 10 project file
-proc osutils:vcxproj:cxxfile { theFile theParams } {
-  if { $theParams == "" } {
-    return "    <ClCompile Include=\"..\\..\\..\\[wokUtils:EASY:bs1 [wokUtils:FILES:wtail $theFile 3]]\" />\n"
+proc osutils:vcxproj:file { file params } {
+  append text "    <ClCompile Include=\"..\\..\\..\\[wokUtils:EASY:bs1 [wokUtils:FILES:wtail $file 3]]\">\n"
+  if { $params != "" } {
+    append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Debug|Win32\'\">[string trim ${params}]  %(AdditionalOptions)</AdditionalOptions>\n"
+  }
+
+  if { $params != "" } {
+    append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Release|Win32\'\">[string trim ${params}]  %(AdditionalOptions)</AdditionalOptions>\n"
+  }
+
+  if { $params != "" } {
+    append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Debug|x64\'\">[string trim ${params}]  %(AdditionalOptions)</AdditionalOptions>\n"
+  }
+
+  if { $params != "" } {
+    append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Release|x64\'\">[string trim ${params}]  %(AdditionalOptions)</AdditionalOptions>\n"
  }

-  set aParams [string trim ${theParams}]
-  append text "    <ClCompile Include=\"..\\..\\..\\[wokUtils:EASY:bs1 [wokUtils:FILES:wtail $theFile 3]]\">\n"
-  append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Debug|Win32\'\">${aParams} %(AdditionalOptions)</AdditionalOptions>\n"
-  append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Release|Win32\'\">${aParams} %(AdditionalOptions)</AdditionalOptions>\n"
-  append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Debug|x64\'\">${aParams} %(AdditionalOptions)</AdditionalOptions>\n"
-  append text "      <AdditionalOptions Condition=\"\'\$(Configuration)|\$(Platform)\'==\'Release|x64\'\">${aParams} %(AdditionalOptions)</AdditionalOptions>\n"
  append text "    </ClCompile>\n"
  return $text
 }

-# Generate entry for one header file in Visual Studio 10 project file
-proc osutils:vcxproj:hxxfile { theFile } { return "    <ClInclude Include=\"..\\..\\..\\[wokUtils:EASY:bs1 [wokUtils:FILES:wtail $theFile 3]]\" />\n" }
-
 # Generate Visual Studio 2010 project filters file
-proc osutils:vcxproj:filters { dir proj theCxxFilesMap theHxxFilesMap } {
-  upvar $theCxxFilesMap aCxxFilesMap
-  upvar $theHxxFilesMap aHxxFilesMap
+proc osutils:vcxproj:filters { dir proj theFilesMap } {
+  upvar $theFilesMap aFilesMap

  # header
  append text "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n"
@@ -1636,25 +1594,17 @@ proc osutils:vcxproj:filters { dir proj theCxxFilesMap theHxxFilesMap } {
  append text "    <Filter Include=\"Source files\">\n"
  append text "      <UniqueIdentifier>[OS:genGUID]</UniqueIdentifier>\n"
  append text "    </Filter>\n"
-  append text "    <Filter Include=\"Header files\">\n"
-  append text "      <UniqueIdentifier>[OS:genGUID]</UniqueIdentifier>\n"
-  append text "    </Filter>\n"
-  foreach unit $aCxxFilesMap(units) {
+  foreach unit $aFilesMap(units) {
    append text "    <Filter Include=\"Source files\\${unit}\">\n"
    append text "      <UniqueIdentifier>[OS:genGUID]</UniqueIdentifier>\n"
    append text "    </Filter>\n"
  }
-  foreach unit $aHxxFilesMap(units) {
-    append text "    <Filter Include=\"Header files\\${unit}\">\n"
-    append text "      <UniqueIdentifier>[OS:genGUID]</UniqueIdentifier>\n"
-    append text "    </Filter>\n"
-  }
  append text "  </ItemGroup>\n"

-  # list of cxx files
+  # list of files
  append text "  <ItemGroup>\n"
-  foreach unit $aCxxFilesMap(units) {
-    foreach file $aCxxFilesMap($unit) {
+  foreach unit $aFilesMap(units) {
+    foreach file $aFilesMap($unit) {
      append text "    <ClCompile Include=\"..\\..\\..\\[wokUtils:EASY:bs1 [wokUtils:FILES:wtail $file 3]]\">\n"
      append text "      <Filter>Source files\\${unit}</Filter>\n"
      append text "    </ClCompile>\n"
@@ -1662,19 +1612,51 @@ proc osutils:vcxproj:filters { dir proj theCxxFilesMap theHxxFilesMap } {
  }
  append text "  </ItemGroup>\n"

-  # list of hxx files
+  # end
+  append text "</Project>"
+
+  # write file
+  set fp [open [set fvcproj [file join $dir ${proj}.vcxproj.filters]] w]
+  fconfigure $fp -translation crlf
+  puts $fp $text
+  close $fp
+
+  return ${proj}.vcxproj.filters
+}
+
+# Generate Visual Studio 2011 project filters file
+proc osutils:vcx1proj:filters { dir proj theFilesMap } {
+  upvar $theFilesMap aFilesMap
+
+  # header
+  append text "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n"
+  append text "<Project ToolsVersion=\"4.0\" xmlns=\"http://schemas.microsoft.com/developer/msbuild/2003\">\n"
+
+  # list of "filters" (units)
  append text "  <ItemGroup>\n"
-  foreach unit $aHxxFilesMap(units) {
-    foreach file $aHxxFilesMap($unit) {
-      append text "    <ClInclude Include=\"..\\..\\..\\[wokUtils:EASY:bs1 [wokUtils:FILES:wtail $file 3]]\">\n"
-      append text "      <Filter>Header files\\${unit}</Filter>\n"
-      append text "    </ClInclude>\n"
+  append text "    <Filter Include=\"Source files\">\n"
+  append text "      <UniqueIdentifier>[OS:genGUID]</UniqueIdentifier>\n"
+  append text "    </Filter>\n"
+  foreach unit $aFilesMap(units) {
+    append text "    <Filter Include=\"Source files\\${unit}\">\n"
+    append text "      <UniqueIdentifier>[OS:genGUID]</UniqueIdentifier>\n"
+    append text "    </Filter>\n"
+  }
+  append text "  </ItemGroup>\n"
+
+  # list of files
+  append text "  <ItemGroup>\n"
+  foreach unit $aFilesMap(units) {
+    foreach file $aFilesMap($unit) {
+      append text "    <ClCompile Include=\"..\\..\\..\\[wokUtils:EASY:bs1 [wokUtils:FILES:wtail $file 3]]\">\n"
+      append text "      <Filter>Source files\\${unit}</Filter>\n"
+      append text "    </ClCompile>\n"
    }
  }
  append text "  </ItemGroup>\n"

  append text "  <ItemGroup>\n"
-  append text "    <ResourceCompile Include=\"${proj}.rc\" />\n"
+  append text "    <ResourceCompile Include=\"${proj}.rc\" />"
  append text "  </ItemGroup>\n"

  # end
@@ -1745,11 +1727,11 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
  regsub -all -- {__TKDEP__} $theProjTmpl $aUsedLibs theProjTmpl

  set anIncPaths "..\\..\\..\\inc"
-#  set aTKDefines ""
+  set aTKDefines ""
  set aFilesSection ""
-  set aVcFilesCxx(units) ""
-  set aVcFilesHxx(units) ""
+  set aVcFilesX(units) ""
  set listloc [osutils:tk:units $theToolKit]
+  set resultloc [osutils:justwnt $listloc]
  if [array exists written] { unset written }
  #puts "\t1 [wokparam -v %CMPLRS_CXX_Options [w_info -f]] father"
  #puts "\t2 [wokparam -v %CMPLRS_CXX_Options] branch"
@@ -1758,10 +1740,9 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
  set fxloparamfcxx [lindex [osutils:intersect3 [_get_options wnt cmplrs_cxx f] [_get_options wnt cmplrs_cxx b]] 2]
  set fxloparamfc   [lindex [osutils:intersect3 [_get_options wnt cmplrs_c f] [_get_options wnt cmplrs_c b]] 2]
  set fxloparam ""
-  foreach fxlo $listloc {
+  foreach fxlo $resultloc {
    set xlo $fxlo
-    set aSrcFiles [osutils:tk:cxxfiles $xlo wnt]
-	set aHxxFiles [osutils:tk:hxxfiles $xlo wnt]
+    set aSrcFiles [osutils:tk:files $xlo wnt]
 	set fxlo_cmplrs_options_cxx [_get_options wnt cmplrs_cxx $fxlo]
    if {$fxlo_cmplrs_options_cxx == ""} {
      set fxlo_cmplrs_options_cxx [_get_options wnt cmplrs_cxx b]
@@ -1790,22 +1771,12 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
      foreach aSrcFile [lsort $aSrcFiles] {
        if { ![info exists written([file tail $aSrcFile])] } {
          set written([file tail $aSrcFile]) 1
-          append aFilesSection [osutils:vcxproj:cxxfile $aSrcFile $needparam]
+          append aFilesSection [osutils:vcxproj:file $aSrcFile $needparam]
        } else {
          puts "Warning : in vcproj more than one occurences for [file tail $aSrcFile]"
        }
-        if { ! [info exists aVcFilesCxx($xlo)] } { lappend aVcFilesCxx(units) $xlo }
-        lappend aVcFilesCxx($xlo) $aSrcFile
-      }
-      foreach aHxxFile [lsort $aHxxFiles] {
-        if { ![info exists written([file tail $aHxxFile])] } {
-          set written([file tail $aHxxFile]) 1
-          append aFilesSection [osutils:vcxproj:hxxfile $aHxxFile]
-        } else {
-          puts "Warning : in vcproj more than one occurences for [file tail $aHxxFile]"
-        }
-        if { ! [info exists aVcFilesHxx($xlo)] } { lappend aVcFilesHxx(units) $xlo }
-        lappend aVcFilesHxx($xlo) $aHxxFile
+        if { ! [info exists aVcFilesX($xlo)] } { lappend aVcFilesX(units) $xlo }
+        lappend aVcFilesX($xlo) $aSrcFile
      }
    } else {
      append aFilesSection "\t\t\t<Filter\n"
@@ -1821,9 +1792,15 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
      }
      append aFilesSection "\t\t\t</Filter>\n"
    }
+
+    # macros
+    append aTKDefines ";__${xlo}_DLL"
+    # common includes
+#    append anIncPaths ";..\\..\\..\\src\\${xlo}"
  }

  regsub -all -- {__TKINC__}  $theProjTmpl $anIncPaths theProjTmpl
+  regsub -all -- {__TKDEFS__} $theProjTmpl $aTKDefines theProjTmpl
  regsub -all -- {__FILES__}  $theProjTmpl $aFilesSection theProjTmpl

  # write file
@@ -1833,8 +1810,12 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
  close $aFile

  # write filters file for vc10+
-  if { "$theVcVer" != "vc7" && "$theVcVer" != "vc8" && "$theVcVer" != "vc9" } {
-    lappend aVcFiles [osutils:vcxproj:filters $theOutDir $theToolKit aVcFilesCxx aVcFilesHxx]
+  if { "$theVcVer" == "vc7" || "$theVcVer" == "vc8" || "$theVcVer" == "vc9" } {
+    # nothing
+  } elseif { "$theVcVer" == "vc10" } {
+    lappend aVcFiles [osutils:vcxproj:filters $theOutDir $theToolKit aVcFilesX]
+  } else {
+    lappend aVcFiles [osutils:vcx1proj:filters $theOutDir $theToolKit aVcFilesX]
  }

  # write resource file
@@ -1866,14 +1847,16 @@ proc osutils:tk:loadunit { loc map } {
  return
 }

-# Returns the list of all files name in a toolkit within specified list of file extensions.
-proc osutils:tk:files { tkloc theExtensions } {
+# Returns the list of all compilable files name in a toolkit, or devunit of any type
+# Tfiles lists for each unit the type of file that can be compiled.
+proc osutils:tk:files { tkloc thePlatform } {
  set Tfiles(source,nocdlpack)     {source pubinclude}
  set Tfiles(source,toolkit)       {}
  set Tfiles(source,executable)    {source pubinclude}
  set listloc [concat [osutils:tk:units $tkloc] $tkloc]
  #puts " listloc = $listloc"

+  set l_comp [osutils:compilable $thePlatform]
  set resultloc $listloc
  set lret {}
  foreach loc $resultloc {
@@ -1883,7 +1866,6 @@ proc osutils:tk:files { tkloc theExtensions } {
         "t" { set utyp "toolkit" }
         "n" { set utyp "nocdlpack" }
         "x" { set utyp "executable" }
-         default { error "Error: Cannot determine type of unit $loc, check adm/UDLIST!" }
    }
    if [array exists map] { unset map }
    osutils:tk:loadunit $loc map
@@ -1898,7 +1880,7 @@ proc osutils:tk:files { tkloc theExtensions } {
      #puts $type
      foreach f $map($type) {
        #puts $f
-        if { [lsearch $theExtensions [file extension $f]] != -1 } {
+        if { [lsearch $l_comp [file extension $f]] != -1 } {
          lappend lret $f
        }
      }
@@ -1907,16 +1889,10 @@ proc osutils:tk:files { tkloc theExtensions } {
  return $lret
 }

-# Returns the list of all compilable files name in a toolkit.
-proc osutils:tk:cxxfiles { tkloc thePlatform } { return [osutils:tk:files $tkloc [osutils:compilable $thePlatform]] }
-
-# Returns the list of all header files name in a toolkit.
-proc osutils:tk:hxxfiles { tkloc thePlatform } { return [osutils:tk:files $tkloc [osutils:fileExtensionsHeaders $thePlatform]] }
-
 # Generate Visual Studio project file for executable
 proc osutils:vcprojx { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
  set aVcFiles {}
-  foreach f [osutils:tk:cxxfiles $theToolKit wnt] {
+  foreach f [osutils:tk:files $theToolKit wnt] {
    set aProjTmpl [osutils:vcproj:readtemplate $theVcVer $isUWP 1]

    set aProjName [file rootname [file tail $f]]
@@ -1951,16 +1927,15 @@ proc osutils:vcprojx { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
    regsub -all -- {__TKDEP__} $aProjTmpl $aUsedLibs aProjTmpl

    set aFilesSection ""
-    set aVcFilesCxx(units) ""
-	set aVcFilesHxx(units) ""
+    set aVcFilesX(units) ""

    if { ![info exists written([file tail $f])] } {
      set written([file tail $f]) 1

      if { "$theVcVer" != "vc7" && "$theVcVer" != "vc8" && "$theVcVer" != "vc9" } {
-        append aFilesSection [osutils:vcxproj:cxxfile $f ""]
-        if { ! [info exists aVcFilesCxx($theToolKit)] } { lappend aVcFilesCxx(units) $theToolKit }
-        lappend aVcFilesCxx($theToolKit) $f
+        append aFilesSection [osutils:vcxproj:file $f ""]
+        if { ! [info exists aVcFilesX($theToolKit)] } { lappend aVcFilesX(units) $theToolKit }
+        lappend aVcFilesX($theToolKit) $f
      } else {
        append aFilesSection "\t\t\t<Filter\n"
        append aFilesSection "\t\t\t\tName=\"$theToolKit\"\n"
@@ -1972,8 +1947,10 @@ proc osutils:vcprojx { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
      puts "Warning : in vcproj there are than one occurences for [file tail $f]"
    }
    #puts "$aProjTmpl $aFilesSection"
+    set aTKDefines ";__${theToolKit}_DLL"
    set anIncPaths "..\\..\\..\\inc"
    regsub -all -- {__TKINC__}  $aProjTmpl $anIncPaths    aProjTmpl
+    regsub -all -- {__TKDEFS__} $aProjTmpl $aTKDefines    aProjTmpl
    regsub -all -- {__FILES__}  $aProjTmpl $aFilesSection aProjTmpl
    regsub -all -- {__CONF__}   $aProjTmpl Application    aProjTmpl

@@ -1989,12 +1966,9 @@ proc osutils:vcprojx { theVcVer isUWP theOutDir theToolKit theGuidsMap } {

    # write filters file for vc10
    if { "$theVcVer" != "vc7" && "$theVcVer" != "vc8" && "$theVcVer" != "vc9" } {
-      lappend aVcFiles [osutils:vcxproj:filters $theOutDir $aProjName aVcFilesCxx aVcFilesHxx]
+      lappend aVcFiles [osutils:vcxproj:filters $theOutDir $aProjName aVcFilesX]
    }

-    # write resource file
-    lappend aVcFiles [osutils:readtemplate:rc $theOutDir $aProjName]
-
    set aCommonSettingsFileTmpl ""
    if { "$theVcVer" == "vc7" || "$theVcVer" == "vc8" } {
      # nothing
@@ -2177,7 +2151,7 @@ proc osutils:cbptk { theCmpl theOutDir theToolKit thePlatform} {
  if [array exists written] { unset written }
  foreach fxlo $resultloc {
    set xlo       $fxlo
-    set aSrcFiles [osutils:tk:cxxfiles $xlo $thePlatform]
+    set aSrcFiles [osutils:tk:files $xlo $thePlatform]
    foreach aSrcFile [lsort $aSrcFiles] {
      if { ![info exists written([file tail $aSrcFile])] } {
        set written([file tail $aSrcFile]) 1
@@ -2188,9 +2162,9 @@ proc osutils:cbptk { theCmpl theOutDir theToolKit thePlatform} {
    }

    # macros for correct DLL exports
-#    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
-#      lappend aTKDefines "__${xlo}_DLL"
-#    }
+    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
+      lappend aTKDefines "__${xlo}_DLL"
+    }
  }

  return [osutils:cbp $theCmpl $theOutDir $theToolKit $thePlatform $aTKSrcFiles $aUsedLibs $aFrameworks $anIncPaths $aTKDefines]
@@ -2271,7 +2245,7 @@ proc osutils:cbpx { theCmpl theOutDir theToolKit thePlatform } {
  set aWokArch    "$::env(ARCH)"

  set aCbpFiles {}
-  foreach aSrcFile [osutils:tk:cxxfiles $theToolKit $thePlatform] {
+  foreach aSrcFile [osutils:tk:files $theToolKit $thePlatform] {
    # collect list of referred libraries to link with
    set aUsedLibs     [list]
    set aFrameworks   [list]
@@ -2307,9 +2281,9 @@ proc osutils:cbpx { theCmpl theOutDir theToolKit thePlatform } {
    }

    # macros for correct DLL exports
-#    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
-#      lappend aTKDefines "__${theToolKit}_DLL"
-#    }
+    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
+      lappend aTKDefines "__${theToolKit}_DLL"
+    }

    # common include paths
    lappend anIncPaths "../../../inc"
@@ -2339,10 +2313,6 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
  set aCmplFlagsDebug   [list]
  set toPassArgsByFile 0
  set aLibPrefix "lib"
-  set aPlatformAndCompiler "${thePlatform}/gcc"
-  if { "$thePlatform" == "mac" || "$thePlatform" == "ios" } {
-    set aPlatformAndCompiler "${thePlatform}/clang"
-  }
  if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" || "$thePlatform" == "qnx" } {
    set toPassArgsByFile 1
  }
@@ -2399,17 +2369,17 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
  # Release target configuration
  puts $aFile "\t\t\t<Target title=\"Release\">"
  if { "$theIsExe" == "true" } {
-    puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bin/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
+    puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bin/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
    puts $aFile "\t\t\t\t<Option type=\"1\" />"
  } else {
    if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bin/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${aPlatformAndCompiler}/lib/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bin/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${thePlatform}/cbp/lib/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
    } else {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/lib/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/lib/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
    }
    puts $aFile "\t\t\t\t<Option type=\"3\" />"
  }
-  puts $aFile "\t\t\t\t<Option object_output=\"../../../${aPlatformAndCompiler}/obj\" />"
+  puts $aFile "\t\t\t\t<Option object_output=\"../../../${thePlatform}/cbp/obj\" />"
  puts $aFile "\t\t\t\t<Option compiler=\"$aCmplCbp\" />"
  puts $aFile "\t\t\t\t<Option createDefFile=\"0\" />"
  if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
@@ -2432,7 +2402,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
  if { $toPassArgsByFile == 1 } {
    puts $aFile "\t\t\t\t\t<Add option=\"\@$aLnkFileName\" />"
  }
-  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${aPlatformAndCompiler}/lib\" />"
+  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${thePlatform}/cbp/lib\" />"
  if { "$thePlatform" == "mac" } {
    if { [ lsearch $theLibsList X11 ] >= 0} {
      puts $aFile "\t\t\t\t\t<Add directory=\"/usr/X11/lib\" />"
@@ -2440,7 +2410,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
  }
  puts $aFile "\t\t\t\t\t<Add option=\"\$(CSF_OPT_LNK${aWokArch})\" />"
  if { "$thePlatform" == "lin" } {
-    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${aPlatformAndCompiler}/lib\" />"
+    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${thePlatform}/cbp/lib\" />"
  }
  puts $aFile "\t\t\t\t</Linker>"

@@ -2449,17 +2419,17 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
  # Debug target configuration
  puts $aFile "\t\t\t<Target title=\"Debug\">"
  if { "$theIsExe" == "true" } {
-    puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bind/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
+    puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bind/${theProjName}\" prefix_auto=\"0\" extension_auto=\"0\" />"
    puts $aFile "\t\t\t\t<Option type=\"1\" />"
  } else {
    if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/bind/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${aPlatformAndCompiler}/libd/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/bind/${aLibPrefix}${theProjName}\" imp_lib=\"../../../${thePlatform}/cbp/libd/\$(TARGET_OUTPUT_BASENAME)\" prefix_auto=\"1\" extension_auto=\"1\" />"
    } else {
-      puts $aFile "\t\t\t\t<Option output=\"../../../${aPlatformAndCompiler}/libd/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
+      puts $aFile "\t\t\t\t<Option output=\"../../../${thePlatform}/cbp/libd/lib${theProjName}.so\" prefix_auto=\"0\" extension_auto=\"0\" />"
    }
    puts $aFile "\t\t\t\t<Option type=\"3\" />"
  }
-  puts $aFile "\t\t\t\t<Option object_output=\"../../../${aPlatformAndCompiler}/objd\" />"
+  puts $aFile "\t\t\t\t<Option object_output=\"../../../${thePlatform}/cbp/objd\" />"
  puts $aFile "\t\t\t\t<Option compiler=\"$aCmplCbp\" />"
  puts $aFile "\t\t\t\t<Option createDefFile=\"0\" />"
  if { "$thePlatform" == "wnt" || "$thePlatform" == "uwp" } {
@@ -2482,7 +2452,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
  if { $toPassArgsByFile == 1 } {
    puts $aFile "\t\t\t\t\t<Add option=\"\@$aLnkDebFileName\" />"
  }
-  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${aPlatformAndCompiler}/libd\" />"
+  puts $aFile "\t\t\t\t\t<Add directory=\"../../../${thePlatform}/cbp/libd\" />"
  if { "$thePlatform" == "mac" } {
    if { [ lsearch $theLibsList X11 ] >= 0} {
      puts $aFile "\t\t\t\t\t<Add directory=\"/usr/X11/lib\" />"
@@ -2490,7 +2460,7 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
  }
  puts $aFile "\t\t\t\t\t<Add option=\"\$(CSF_OPT_LNK${aWokArch}D)\" />"
  if { "$thePlatform" == "lin" } {
-    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${aPlatformAndCompiler}/libd\" />"
+    puts $aFile "\t\t\t\t\t<Add option=\"-Wl,-rpath-link=../../../${thePlatform}/cbp/libd\" />"
  }
  puts $aFile "\t\t\t\t</Linker>"

@@ -2557,8 +2527,8 @@ proc osutils:cbp { theCmpl theOutDir theProjName thePlatform theSrcFiles theLibs
      puts $aFile "\t\t\t<Option link=\"0\" />"
      puts $aFile "\t\t</Unit>"

-      set aFileObj  [string map {.cxx .o} [string map [list "/src/" "/${aPlatformAndCompiler}/obj/src/"]  $aSrcFile]]
-      set aFileObjd [string map {.cxx .o} [string map [list "/src/" "/${aPlatformAndCompiler}/objd/src/"] $aSrcFile]]
+      set aFileObj  [string map {.cxx .o} [string map [list "/src/" "/$thePlatform/cbp/obj/src/"]  $aSrcFile]]
+      set aFileObjd [string map {.cxx .o} [string map [list "/src/" "/$thePlatform/cbp/objd/src/"] $aSrcFile]]
      puts -nonewline $aFileLnkObj  "$aFileObj "
      puts -nonewline $aFileLnkObjd "$aFileObjd "
    } else {
@@ -2703,7 +2673,7 @@ proc OS:xcodeproj { theModules theOutDir theGuidsMap theLibType thePlatform} {
 }

 # Generates dependencies section for Xcode project files.
-proc osutils:xcdtk:deps {theToolKit theTargetType theGuidsMap theFileRefSection theDepsGuids theDepsRefGuids thePlatform theIsStatic} {
+proc osutils:xcdtk:deps {theToolKit theTargetType theGuidsMap theFileRefSection theDepsGuids theDepsRefGuids theIsStatic} {
  upvar $theGuidsMap         aGuidsMap
  upvar $theFileRefSection   aFileRefSection
  upvar $theDepsGuids        aDepsGuids
@@ -2714,7 +2684,7 @@ proc osutils:xcdtk:deps {theToolKit theTargetType theGuidsMap theFileRefSection
  set aDepToolkits      [lappend [wokUtils:LIST:Purge [osutils:tk:close $theToolKit]] $theToolKit]

  if { "$theTargetType" == "executable" } {
-    set aFile [osutils:tk:cxxfiles $theToolKit mac]
+    set aFile [osutils:tk:files $theToolKit mac]
    set aProjName [file rootname [file tail $aFile]]
    set aDepToolkits [LibToLinkX $theToolKit $aProjName]
  }
@@ -2727,7 +2697,7 @@ proc osutils:xcdtk:deps {theToolKit theTargetType theGuidsMap theFileRefSection
    }
  }

-  osutils:usedOsLibs $theToolKit $thePlatform aLibs aFrameworks
+  osutils:usedOsLibs $theToolKit "mac" aLibs aFrameworks
  set aUsedLibs [concat $aUsedLibs $aLibs]
  set aUsedLibs [concat $aUsedLibs $aFrameworks]
  foreach tkx $aUsedLibs {
@@ -2780,7 +2750,7 @@ proc osutils:xcdtk:sources {theToolKit theTargetType theSrcFileRefSection theGro
      set aGuidsMap($aPackage) [OS:genGUID "xcd"]
    }

-    set aSrcFiles [osutils:tk:cxxfiles $xlo mac]
+    set aSrcFiles [osutils:tk:files $xlo mac]
    foreach aSrcFile [lsort $aSrcFiles] {
      set aFileExt "sourcecode.cpp.cpp"

@@ -2942,7 +2912,7 @@ proc osutils:xcdtk { theOutDir theToolKit theGuidsMap theIsStatic thePlatform {t
  }

  puts $aPbxprojFile [osutils:xcdtk:sources $theToolKit $theTargetType aSrcFileRefSection aGroupSection aPackagesGuids aSrcFileGuids aGuidsMap anIncPaths]
-  puts $aPbxprojFile [osutils:xcdtk:deps    $theToolKit $theTargetType aGuidsMap aDepsFileRefSection aDepsGuids aDepsRefGuids $thePlatform $theIsStatic]
+  puts $aPbxprojFile [osutils:xcdtk:deps    $theToolKit $theTargetType aGuidsMap aDepsFileRefSection aDepsGuids aDepsRefGuids $theIsStatic]
  # End PBXBuildFile section

  # Begin PBXFileReference section
--- a/adm/qmake/.gitignore
+++ b/adm/qmake/.gitignore
@@ -1,5 +0,0 @@
-/*/*.pro
-/*/*/*.pro
-*.pro.user
-custom.pri
-custom.auto.pri
--- a/adm/qmake/OccCppConfig.pri
+++ b/adm/qmake/OccCppConfig.pri
@@ -1,157 +0,0 @@
-# This is project defines C++ compilation rules for building an OCCT Toolkit.
-
-exists(custom.auto.pri) { include(custom.auto.pri) }
-exists(custom.pri)      { include(custom.pri) }
-
-# Disable some dummy Qt defaults
-QT -= core gui
-CONFIG -= qt app_bundle
-CONFIG -= qml_debug
-CONFIG -= debug_and_release
-
-OccGitRoot = $$_PRO_FILE_PWD_/../../../..
-
-# Define compilation flags
-CONFIG += warn_on
-QMAKE_CFLAGS_WARN_ON   = -Wall
-QMAKE_CXXFLAGS_WARN_ON = -Wall
-win32 {
-  QMAKE_CFLAGS_WARN_ON   = -W4
-  QMAKE_CXXFLAGS_WARN_ON = -W4
-  QMAKE_CXXFLAGS_EXCEPTIONS_ON = /EHa
-  QMAKE_CXXFLAGS_STL_ON = /EHa
-
-  QMAKE_CXXFLAGS += -fp:precise
-  #QMAKE_CXXFLAGS -= -Zc:throwingNew
-  #QMAKE_CXXFLAGS -= -Zc:rvalueCast
-
-  QMAKE_LFLAGS += -INCREMENTAL:NO
-
-  CONFIG(debug, debug|release) {
-    QMAKE_CXXFLAGS += -Od
-    QMAKE_CXXFLAGS += -Ob1
-  }
-
-  DEFINES -= WIN32
-  DEFINES -= WIN64
-  DEFINES += _CRT_SECURE_NO_WARNINGS
-  DEFINES += _CRT_NONSTDC_NO_DEPRECATE
-  DEFINES += _SCL_SECURE_NO_WARNINGS
-} else {
-  CONFIG += c++11
-  QMAKE_CFLAGS   += -fexceptions
-  QMAKE_CXXFLAGS += -fexceptions
-  QMAKE_CXXFLAGS += -fvisibility=default
-  DEFINES += OCC_CONVERT_SIGNALS
-  mac {
-    iphoneos {
-      QMAKE_IOS_DEPLOYMENT_TARGET = 8.0
-    } else {
-      QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.14
-    }
-  }
-}
-!CONFIG(debug, debug|release) {
-  # disable exceptions in Release builds
-  DEFINES += No_Exception
-  HAVE_RelWithDebInfo {
-    win32 {
-      CONFIG += force_debug_info
-    }
-  }
-}
-
-# Define output folder depending on compiler name
-MY_BITNESS = 32
-
-equals(QMAKE_TARGET.arch, x86_64) | equals(QMAKE_HOST.arch, x86_64) { MY_BITNESS = 64 }
-equals(ANDROID_TARGET_ARCH, arm64-v8a) { MY_BITNESS = 64 }
-has64Target = $$find(QMAKE_TARGET.arch, "x64")
-count(has64Target, 1) { MY_BITNESS = 64 }
-
-MY_PLATFORM = platform
-CONFIG(iphonesimulator, iphoneos|iphonesimulator) { MY_PLATFORM = iphonesimulator
-} else:CONFIG(iphoneos, iphoneos|iphonesimulator) { MY_PLATFORM = iphoneos
-} else:android { MY_PLATFORM = android-$$ANDROID_TARGET_ARCH
-} else:win32   { MY_PLATFORM = win$$MY_BITNESS
-} else:mac     { MY_PLATFORM = mac
-} else:linux   { MY_PLATFORM = lin
-} else:unix    { MY_PLATFORM = unix
-} else { warning (Unknown platform. "$$MY_PLATFORM" is used) }
-
-MY_COMPILER = compiler
-MY_VC_VER = 0
-android-g++ {
-  MY_COMPILER = gcc
-} else:clang {
-  MY_COMPILER = clang
-} else:gcc {
-  MY_COMPILER = gcc
-} else:win32-msvc2010 {
-  MY_COMPILER = vc10
-  MY_VC_VER = 10
-} else:win32-msvc2012 {
-  MY_COMPILER = vc11
-  MY_VC_VER = 11
-} else:win32-msvc2013 {
-  MY_COMPILER = vc12
-  MY_VC_VER = 12
-} else:win32-msvc2015 {
-  MY_COMPILER = vc14
-  MY_VC_VER = 14
-} else:win32-msvc2017 {
-  MY_COMPILER = vc14
-  MY_VC_VER = 14
-} else:win32-msvc {
-  MY_COMPILER = vc14
-  MY_VC_VER = 14
-  aMsvcVer = $$(VisualStudioVersion)
-  equals(aMsvcVer, 14.0){
-    # VS2015, vc140
-  } else:equals(aMsvcVer, 15.0){
-    # VS2015, vc141
-  } else:equals(aMsvcVer, 16.0){
-    # VS2019, vc142
-  } else {
-    warning (Unknown msvc version. "$$MY_COMPILER" is used)
-  }
-} else {
-  warning (Unknown compiler. "$$MY_COMPILER" is used)
-}
-MY_PLATFORM_AND_COMPILER = $$MY_PLATFORM/$$MY_COMPILER
-#warning (The platform is "$$MY_PLATFORM"; bitness is "$$MY_BITNESS"; compiler is "$$MY_COMPILER")
-
-CONFIG(debug, debug|release) { MY_BUILDTYPE = d }
-
-DESTDIR = $$OccGitRoot/$${MY_PLATFORM_AND_COMPILER}/lib$${MY_BUILDTYPE}
-win32 {
-  DESTDIR  = $$OccGitRoot/win$${MY_BITNESS}/vc$${MY_VC_VER}/bin$${MY_BUILDTYPE}
-  aLibDest = $$DESTDIR/../lib$${MY_BUILDTYPE}
-  #DLLDESTDIR = $$DESTDIR/../bin$${MY_BUILDTYPE}
-
-  # dummy target creating lib/libd folder
-  occtkgen_libfolder.input  = $$_PRO_FILE_PWD_/../../OcctDummy.in
-  occtkgen_libfolder.output = $$aLibDest/dummy.tmp
-  occtkgen_libfolder.config = verbatim
-  QMAKE_SUBSTITUTES += occtkgen_libfolder
-
-  LIBS += -L$$aLibDest
-  equals(TEMPLATE, lib) {
-    QMAKE_CLEAN += $$DESTDIR/$${TARGET}.dll
-    QMAKE_CLEAN += $$aLibDest/$${TARGET}.lib
-    QMAKE_CLEAN += $$aLibDest/$${TARGET}.exp
-  } else {
-    QMAKE_CLEAN += $$DESTDIR/$${TARGET}.exe
-  }
-  QMAKE_CLEAN += $$DESTDIR/$${TARGET}.pdb
-  QMAKE_LFLAGS += -PDB:"$$DESTDIR/$${TARGET}.pdb"
-  QMAKE_LFLAGS += -IMPLIB:"$$aLibDest/$${TARGET}.lib"
-} else {
-  LIBS += -L$$DESTDIR
-  equals(TEMPLATE, app) {
-    DESTDIR = $$OccGitRoot/$${MY_PLATFORM_AND_COMPILER}/bin$${MY_BUILDTYPE}
-  }
-}
-
-#OBJECTS_DIR = $$DESTDIR/../obj$${MY_BUILDTYPE}/$${TARGET}
-OBJECTS_DIR = $$DESTDIR/../obj$${MY_BUILDTYPE}
--- a/adm/qmake/OccModule.pri
+++ b/adm/qmake/OccModule.pri
@@ -1,36 +0,0 @@
-# This is a project template file defining an OCCT Module.
-# This project should be included with predefined OCC_MODULE_NAME variable.
-TEMPLATE = subdirs
-exists(custom.auto.pri) { include(custom.auto.pri) }
-exists(custom.pri)      { include(custom.pri) }
-
-# Iterate over Toolkits within current Module and generate sub-project per Toolkit
-aModuleList = $$cat(../MODULES, lines)
-for (aModuleIter, aModuleList) {
-  #aTkList = $$list($$aModuleIter) - this doesn't work, qmake bug?
-  aModule = $$first($$list($$aModuleIter))
-  equals (aModule, $$OCC_MODULE_NAME) {
-    for (aToolKit, $$list($$aModuleIter)) {
-      toSkipToolkit = 0
-      equals (aToolKit, $$OCC_MODULE_NAME)      { toSkipToolkit = 1 }
-      !HAVE_VTK:equals (aToolKit, "TKIVtk")     { toSkipToolkit = 1 }
-      !HAVE_VTK:equals (aToolKit, "TKIVtkDraw") { toSkipToolkit = 1 }
-      !win32:   equals (aToolKit, "TKD3DHost")  { toSkipToolkit = 1 }
-      equals (toSkipToolkit, 0) {
-        #warning(aToolKit($$OCC_MODULE_NAME)=$$aToolKit)
-        eval(occtkgen_$${aToolKit}.input  = $$_PRO_FILE_PWD_/../OccToolkit.pro.in)
-        eval(occtkgen_$${aToolKit}.output = $$_PRO_FILE_PWD_/$${aToolKit}/$${aToolKit}.pro)
-        eval(occtkgen_$${aToolKit}.config = verbatim)
-        eval(QMAKE_SUBSTITUTES += occtkgen_$${aToolKit})
-        SUBDIRS += $${aToolKit}
-
-        aModExtList = $$cat(../../src/$${aToolKit}/EXTERNLIB, lines)
-        aTkDepends = $${aToolKit}.depends
-        for (aModExtIter, aModExtList) {
-          contains ($$list($$aModuleIter), $$aModExtIter) { eval ($${aTkDepends} += $$aModExtIter) }
-        }
-        #warning($$aToolKit depends on: $$reverse($${aTkDepends}))
-      }
-    }
-  }
-}
--- a/adm/qmake/OccModule.pro.in
+++ b/adm/qmake/OccModule.pro.in
@@ -1,2 +0,0 @@
-OCC_MODULE_NAME = \$\$TARGET
-include(../OccModule.pri)
--- a/adm/qmake/OccToolkit.pri
+++ b/adm/qmake/OccToolkit.pri
@@ -1,144 +0,0 @@
-# This is a project template file defining an OCCT Toolkit.
-# This project should be included with predefined OCC_TOOLKIT_NAME variable.
-
-TEMPLATE = lib
-!exists(../../src/$$OCC_TOOLKIT_NAME/PACKAGES) {
-  TEMPLATE = app
-  CONFIG += console
-}
-win32 {
-  # do not append version to DLL name
-  CONFIG += skip_target_version_ext
-}
-
-include(OccCppConfig.pri)
-
-aSrcRoot = $$OccGitRoot/src
-aHxxRoot = $$OccGitRoot/inc
-INCLUDEPATH += $$aHxxRoot
-
-# CSF variables
-CSF_FREETYPE  = -lfreetype
-CSF_TclLibs   = -ltcl8.6
-CSF_TclTkLibs = -ltk8.6
-HAVE_FREEIMAGE { CSF_FreeImagePlus = -lfreeimage } else:win32 { CSF_FreeImagePlus = -lwindowscodecs -lole32 }
-HAVE_FFMPEG    { CSF_FFmpeg = -lavcodec -lavformat -lswscale -lavutil }
-HAVE_TBB       { CSF_TBB = -ltbb -ltbbmalloc }
-HAVE_ZLIB      { CSF_ZLIB = -lzlib }
-HAVE_LIBLZMA   { CSF_LIBLZMA = -lliblzma }
-win32 {
-  CSF_kernel32   = -lkernel32
-  CSF_advapi32   = -ladvapi32
-  CSF_gdi32      = -lgdi32
-  CSF_user32     = -luser32 -lcomdlg32
-  CSF_shell32    = -lShell32
-  CSF_opengl32   = -lopengl32
-  CSF_wsock32    = -lwsock32
-  CSF_netapi32   = -lnetapi32
-  CSF_OpenGlLibs = -lopengl32
-  HAVE_GLES2 { CSF_OpenGlLibs = -llibEGL -llibGLESv2 }
-  CSF_psapi      = -lPsapi
-  CSF_winmm      = -lwinmm
-  CSF_d3d9       = -ld3d9
-  CSF_TclLibs    = -ltcl86
-  CSF_TclTkLibs  = -ltk86
-  CSF_TBB =
-} else:mac {
-  CSF_dl         = -ldl
-  CSF_objc       = -lobjc
-  iphoneos {
-    CSF_Appkit     = -framework UIKit
-    CSF_OpenGlLibs = -framework OpenGLES
-  } else {
-    CSF_Appkit     = -framework AppKit
-    CSF_OpenGlLibs = -framework OpenGL
-  }
-  CSF_IOKit      = -framework IOKit
-  CSF_TclLibs    = -framework Tcl
-  CSF_TclTkLibs  = -framework Tk
-} else {
-  CSF_dl = -ldl
-  CSF_ThreadLibs = -lpthread -lrt
-  CSF_OpenGlLibs = -lGL
-  CSF_TclTkLibs  = -lX11 -ltk8.6
-  CSF_XwLibs     = -lX11 -lXext -lXmu -lXi
-  CSF_MotifLibs  = -lX11
-  CSF_fontconfig = -lfontconfig
-  HAVE_GLES2 { CSF_OpenGlLibs = -lEGL -lGLESv2 }
-}
-
-for (aCfgIter, CONFIG) {
-  aRes = $$find(aCfgIter, "^HAVE_")
-  count(aRes, 1) {
-    DEFINES += $$aCfgIter
-  }
-}
-
-# Define the list of standard OCCT file extensions
-aHxxRegex = ^.*\.(hxx|h|lxx|gxx)$
-aPxxRegex = ^.*\.(pxx)$
-aCxxRegex = ^.*\.(cxx|c)$
-mac { aCxxRegex = ^.*\.(cxx|c|m|mm)$ }
-
-# Auxiliary function for probing file extension
-defineTest (occCheckExtension) {
-  aProbe = $$find(1, "$$2")
-  count(aProbe, 1) { return(true) } else { return(false) }
-}
-
-# Auxiliary function for probing compilable files
-defineTest (occIsCxxFile) { occCheckExtension ($$1, $$aCxxRegex) { return(true) } else { return(false) } }
-
-# Auxiliary function for probing header files
-defineTest (occIsHxxFile) { occCheckExtension ($$1, $$aHxxRegex) { return(true) } else { return(false) } }
-
-aTkFiles     = $$cat($$aSrcRoot/$$OCC_TOOLKIT_NAME/FILES,     lines)
-aTkFiles += CMakeLists.txt
-aPackages    = $$cat($$aSrcRoot/$$OCC_TOOLKIT_NAME/PACKAGES,  lines)
-anExternLibs = $$cat($$aSrcRoot/$$OCC_TOOLKIT_NAME/EXTERNLIB, lines)
-
-for (aTkFileIter, aTkFiles) { OTHER_FILES += $$aSrcRoot/$$OCC_TOOLKIT_NAME/$$aTkFileIter }
-for (anExternLib, anExternLibs) {
-  hasCsf = $$find(anExternLib, CSF_)
-  count(hasCsf, 1) {
-    aList = $$split($$anExternLib, "\n")
-    LIBS += $$aList
-  } else {
-    LIBS += -l$$anExternLib
-  }
-}
-
-# Iterate over Packages and add compilable files into this project
-isEmpty (aPackages) { aPackages = $$OCC_TOOLKIT_NAME }
-for (aPackage, aPackages) {
-  aPackageFolder = $$aSrcRoot/$$OCC_TOOLKIT_NAME/$$aPackage
-  aPackageFiles = $$cat($$aSrcRoot/$$aPackage/FILES, lines)
-  for (aFileIter, aPackageFiles) {
-    occIsCxxFile($$aFileIter) {
-      SOURCES += $$aSrcRoot/$$aPackage/$$aFileIter
-    }
-  }
-}
-
-# extend clean with versioned .so files
-!win32 {
-  aVerList = $$split(VERSION, ".")
-  aVerMaj = $$member(aVerList, 0)
-  aVerMin = $$member(aVerList, 1)
-  aVerMic = $$member(aVerList, 2)
-  equals(TEMPLATE, app) {
-    QMAKE_CLEAN += $$DESTDIR/$${TARGET}
-  } else {
-    mac {
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.dylib
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.dylib
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.$${aVerMin}.dylib
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.$${aVerMaj}.$${aVerMin}.$${aVerMic}.dylib
-    } else {
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}.$${aVerMin}
-      QMAKE_CLEAN += $$DESTDIR/lib$${TARGET}.so.$${aVerMaj}.$${aVerMin}.$${aVerMic}
-    }
-  }
-}
--- a/adm/qmake/OccToolkit.pro.in
+++ b/adm/qmake/OccToolkit.pro.in
@@ -1,2 +0,0 @@
-OCC_TOOLKIT_NAME = \$\$TARGET
-include(../../OccToolkit.pri)
--- a/adm/qmake/Occt.pro
+++ b/adm/qmake/Occt.pro
@@ -1,41 +0,0 @@
-# This is an experimental Solution project for building entire OCCT framework using qmake.
-# It can be also used for just source code navigation in Qt Creator without actually building OCCT.
-# Note, as this is an experimental project, compiler flags might differ from official builds - use it on your own risk!
-# Building OCCT using CMake is a preferred solution.
-#
-# This project GENERATES sub-projects (OCCT modules) dynamically, so to start using it:
-# - Launch genconf, select Project Format "Qt Project" and configure dependencies; this will also generate "custom.auto.pri".
-# - Launch genproj to fill in "inc" folder with links to header files.
-# - Open project in Qt Creator, and call "Run qmake".
-# - Close the project in Qt Creator, open it again so that you should see the sub-modules in Project tree; call "Run qmake" again.
-# - "Run qmake" and perform Build.
-TEMPLATE = subdirs
-exists(custom.auto.pri) { include(custom.auto.pri) }
-exists(custom.pri)      { include(custom.pri) }
-
-OTHER_FILES += OccModule.pro.in \
-               OcctHeaderLink.hxx.in \
-               OccToolkit.pro.in \
-               OccCppConfig.pri \
-               OccModule.pri \
-               OccToolkit.pri \
-               custom.pri.template
-
-# Iterate over Modules and generate sub-projects
-aSolModuleList = $$cat(../MODULES, lines)
-for (aSolModuleIter, aSolModuleList) {
-  aSolModule = $$first($$list($$aSolModuleIter))
-  eval(occtkgen_$${aSolModule}.input  = $$_PRO_FILE_PWD_/OccModule.pro.in)
-  eval(occtkgen_$${aSolModule}.output = $$_PRO_FILE_PWD_/$${aSolModule}/$${aSolModule}.pro)
-  eval(occtkgen_$${aSolModule}.config = verbatim)
-  eval(QMAKE_SUBSTITUTES += occtkgen_$${aSolModule})
-  SUBDIRS += $${aSolModule}
-}
-
-# These dependencies are manually defined
-ModelingData.depends = FoundationClasses
-ModelingAlgorithms.depends = FoundationClasses ModelingData
-Visualization.depends = FoundationClasses ModelingData ModelingAlgorithms
-ApplicationFramework.depends = FoundationClasses ModelingData ModelingAlgorithms Visualization
-DataExchange.depends = FoundationClasses ModelingData ModelingAlgorithms ApplicationFramework
-Draw.depends = FoundationClasses ModelingData ModelingAlgorithms ApplicationFramework DataExchange Visualization
--- a/adm/qmake/OcctDummy.in
+++ b/adm/qmake/OcctDummy.in
--- a/adm/qmake/OcctHeaderLink.hxx.in
+++ b/adm/qmake/OcctHeaderLink.hxx.in
@@ -1 +0,0 @@
-#include \"../src/$${OCCT_PACKAGE}/$${OCCT_HEADER}\"
--- a/adm/qmake/custom.pri.template
+++ b/adm/qmake/custom.pri.template
@@ -1,17 +0,0 @@
-PRODUCTS_PATH = c:/3rdparty/vc14
-
-#CONFIG += HAVE_FREEIMAGE
-#CONFIG += HAVE_FFMPEG
-#CONFIG += HAVE_TBB
-#CONFIG += HAVE_GLES2
-#CONFIG += HAVE_D3D
-#CONFIG += HAVE_VTK
-
-aFreeType = $$PRODUCTS_PATH/freetype-2.5.5-vc14-64
-aTclTk    = $$PRODUCTS_PATH/tcltk-86-64
-
-INCLUDEPATH += $$aFreeType/include
-LIBS        += -L$$aFreeType/lib
-
-INCLUDEPATH += $$aTclTk/include
-LIBS        += -L$$aTclTk/lib
--- a/adm/templates/OpenCASCADEConfig.cmake.in
+++ b/adm/templates/OpenCASCADEConfig.cmake.in
@@ -58,6 +58,7 @@ set (OpenCASCADE_BUILD_SHARED_LIBS @BUILD_SHARED_LIBS@)
 set (OpenCASCADE_WITH_TCL       @USE_TCL@)
 set (OpenCASCADE_WITH_FREETYPE  @USE_FREETYPE@)
 set (OpenCASCADE_WITH_FREEIMAGE @USE_FREEIMAGE@)
+set (OpenCASCADE_WITH_GL2PS     @USE_GL2PS@)
 set (OpenCASCADE_WITH_TBB       @USE_TBB@)
 set (OpenCASCADE_WITH_VTK       @USE_VTK@)
 set (OpenCASCADE_WITH_FFMPEG    @USE_FFMPEG@)
--- a/adm/templates/TInspectorEXE.vcxproj.user.in
+++ b/adm/templates/TInspectorEXE.vcxproj.user.in
@@ -4,7 +4,7 @@
  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
 CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
 QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@;%PATH%
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
 </LocalDebuggerEnvironment>
 <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
 <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
@@ -13,7 +13,7 @@ PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@;%PATH%
  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
 CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
 QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@i;%PATH%
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
 </LocalDebuggerEnvironment>
 <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
 <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
@@ -22,7 +22,7 @@ PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@i;%PATH%
  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
 CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
 QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@d;%PATH%
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
 </LocalDebuggerEnvironment>
 <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
 <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
--- a/adm/templates/codeblocks.sh
+++ b/adm/templates/codeblocks.sh
@@ -1,12 +1,11 @@
 #!/bin/bash
-# This file has been generated by genproj.tcl script from CASROOT/adm/templates/codeblocks.sh

 export TARGET="cbp"

 source ./env.sh "$1" "$TARGET"

 if [ -e "/Applications/CodeBlocks.app/Contents/MacOS/CodeBlocks" ]; then
-  /Applications/CodeBlocks.app/Contents/MacOS/CodeBlocks ./adm/$WOKSTATION/cbp/__SOLUTION__.workspace
+  /Applications/CodeBlocks.app/Contents/MacOS/CodeBlocks ./adm/$WOKSTATION/cbp/OCCT.workspace
 else
-  codeblocks ./adm/$WOKSTATION/cbp/__SOLUTION__.workspace
+  codeblocks ./adm/$WOKSTATION/cbp/OCCT.workspace
 fi
--- a/adm/templates/custom.build.bat.in
+++ b/adm/templates/custom.build.bat.in
@@ -11,6 +11,7 @@ if /I "%VCVER%" == "@COMPILER@" (
    set "FREEIMAGE_DIR=@3RDPARTY_FREEIMAGE_DLL_DIRS@"
    set "EGL_DIR=@3RDPARTY_EGL_DLL_DIRS@"
    set "GLES2_DIR=@3RDPARTY_GLES2_DLL_DIRS@"
+    set "GL2PS_DIR=@3RDPARTY_GL2PS_DLL_DIRS@"
    set "TBB_DIR=@3RDPARTY_TBB_DLL_DIR@"
    set "VTK_DIR=@3RDPARTY_VTK_DLL_DIR@"
    set "FFMPEG_DIR=@3RDPARTY_FFMPEG_DLL_DIR@"
--- a/adm/templates/custom.build.sh.in
+++ b/adm/templates/custom.build.sh.in
@@ -9,6 +9,7 @@ if [ "$1" == "@BIN_LETTER@" ]; then
    export TK_DIR="@3RDPARTY_TK_LIBRARY_DIR@"
    export FREETYPE_DIR="@3RDPARTY_FREETYPE_LIBRARY_DIR@"
    export FREEIMAGE_DIR="@3RDPARTY_FREEIMAGE_LIBRARY_DIRS@"
+    export GL2PS_DIR="@3RDPARTY_GL2PS_LIBRARY_DIRS@"
    export TBB_DIR="@3RDPARTY_TBB_LIBRARY_DIR@"
    export VTK_DIR="@3RDPARTY_VTK_LIBRARY_DIR@"
    export FFMPEG_DIR="@3RDPARTY_FFMPEG_LIBRARY_DIR@"
--- a/adm/templates/custom.install.bat.in
+++ b/adm/templates/custom.install.bat.in
@@ -13,6 +13,7 @@ if /I "%VCVER%" == "@COMPILER@" (
    set "FREEIMAGE_DIR=@USED_3RDPARTY_FREEIMAGE_DIRS@"
    set "EGL_DIR=@USED_3RDPARTY_EGL_DIRS@"
    set "GLES2_DIR=@USED_3RDPARTY_GLES2_DIRS@"
+    set "GL2PS_DIR=@USED_3RDPARTY_GL2PS_DIRS@"
    set "TBB_DIR=@USED_3RDPARTY_TBB_DIR@"
    set "VTK_DIR=@USED_3RDPARTY_VTK_DIR@"
    set "FFMPEG_DIR=@USED_3RDPARTY_FFMPEG_DIR@"
--- a/adm/templates/custom.install.sh.in
+++ b/adm/templates/custom.install.sh.in
@@ -9,6 +9,7 @@ if [ "$1" == "@BIN_LETTER@" ]; then
    export TK_DIR="@USED_3RDPARTY_TK_DIR@"
    export FREETYPE_DIR="@USED_3RDPARTY_FREETYPE_DIR@"
    export FREEIMAGE_DIR="@USED_3RDPARTY_FREEIMAGE_DIRS@"
+    export GL2PS_DIR="@USED_3RDPARTY_GL2PS_DIRS@"
    export TBB_DIR="@USED_3RDPARTY_TBB_DIR@"
    export VTK_DIR="@USED_3RDPARTY_VTK_DIR@"
    export FFMPEG_DIR="@USED_3RDPARTY_FFMPEG_DIR@"
--- a/adm/templates/env.bat
+++ b/adm/templates/env.bat
@@ -19,19 +19,17 @@ set "HAVE_TBB=false"
 set "HAVE_OPENCL=false"
 set "HAVE_FREEIMAGE=false"
 set "HAVE_FFMPEG=false"
+set "HAVE_GL2PS=false"
 set "HAVE_VTK=false"
 set "HAVE_GLES2=false"
 set "HAVE_D3D=false"
 set "HAVE_ZLIB=false"
 set "HAVE_LIBLZMA=false"
-set "HAVE_RAPIDJSON=false"
-set "HAVE_E57=false"
 set "CSF_OPT_INC="
 set "CSF_OPT_LIB32="
 set "CSF_OPT_LIB64="
 set "CSF_OPT_BIN32="
 set "CSF_OPT_BIN64="
-set "CSF_DEFINES=%CSF_DEFINES_EXTRA%"

 if not ["%CASROOT%"] == [""] if exist "%SCRIPTROOT%\%CASROOT%" set "CASROOT=%SCRIPTROOT%\%CASROOT%"
 if     ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
@@ -102,10 +100,6 @@ if not "%DevEnvDir%" == "" (
  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[15.0,15.99]" -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
    set "DevEnvDir=%%i\Common7\IDE\"
  )
-) else if /I "%VCFMT%" == "vc142" (
-  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[16.0,16.99]" -latest -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
-    set "DevEnvDir=%%i\Common7\IDE\"
-  )
 ) else if /I "%VCFMT%" == "gcc" (
  rem MinGW
 ) else (
@@ -117,7 +111,6 @@ if not "%DevEnvDir%" == "" (
  echo vc12  = VS 2013 ^(SP3^)
  echo vc14  = VS 2015
  echo vc141 = VS 2017
-  echo vc142 = VS 2019
  exit /B
 )

@@ -142,11 +135,6 @@ if /I "%VCFMT%" == "vc9" (
    set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
  )
  set "VCPlatformToolSet=v141"
-) else if /I "%VCFMT%" == "vc142" (
-  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[16.0,16.99]" -latest -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
-    set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
-  ) 
-  set "VCPlatformToolSet=v142"
 ) else if /I "%VCFMT%" == "gcc" (
  rem MinGW
 ) else (
@@ -168,6 +156,7 @@ set "CSF_OPT_CMPL="
 set "PRODUCTS_DEFINES="
 if ["%HAVE_TBB%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_TBB"       & set "CSF_DEFINES=HAVE_TBB;%CSF_DEFINES%"
 if ["%HAVE_OPENCL%"]    == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_OPENCL"    & set "CSF_DEFINES=HAVE_OPENCL;%CSF_DEFINES%"
+if ["%HAVE_GL2PS%"]     == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_GL2PS"     & set "CSF_DEFINES=HAVE_GL2PS;%CSF_DEFINES%"
 if ["%HAVE_FREEIMAGE%"] == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_FREEIMAGE" & set "CSF_DEFINES=HAVE_FREEIMAGE;%CSF_DEFINES%"
 if ["%HAVE_FFMPEG%"]    == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_FFMPEG"    & set "CSF_DEFINES=HAVE_FFMPEG;%CSF_DEFINES%"
 if ["%HAVE_VTK%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_VTK"       & set "CSF_DEFINES=HAVE_VTK;%CSF_DEFINES%"
@@ -175,8 +164,6 @@ if ["%HAVE_GLES2%"]     == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DH
 if ["%HAVE_D3D%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_D3D"       & set "CSF_DEFINES=HAVE_D3D;%CSF_DEFINES%"
 if ["%HAVE_ZLIB%"]      == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_ZLIB"      & set "CSF_DEFINES=HAVE_ZLIB;%CSF_DEFINES%"
 if ["%HAVE_LIBLZMA%"]   == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_LIBLZMA"   & set "CSF_DEFINES=HAVE_LIBLZMA;%CSF_DEFINES%"
-if ["%HAVE_RAPIDJSON%"] == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_RAPIDJSON" & set "CSF_DEFINES=HAVE_RAPIDJSON;%CSF_DEFINES%"
-if ["%HAVE_E57%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_E57"       & set "CSF_DEFINES=HAVE_E57;%CSF_DEFINES%"

 rem Eliminate VS warning
 if ["%CSF_DEFINES%"]  == [""] set "CSF_DEFINES=;"
--- a/adm/templates/env.bat.in
+++ b/adm/templates/env.bat.in
@@ -70,10 +70,6 @@ if not "%DevEnvDir%" == "" (
  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[15.0,15.99]" -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
    set "DevEnvDir=%%i\Common7\IDE\"
  )
-) else if /I "%VCFMT%" == "vc142" (
-  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[16.0,16.99]" -latest -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
-    set "DevEnvDir=%%i\Common7\IDE\"
-  )  
 ) else if /I "%VCFMT%" == "gcc" (
  rem MinGW
 ) else (
@@ -102,11 +98,6 @@ if /I "%VCFMT%" == "vc9" (
    set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
  )
  set "VCPlatformToolSet=v141"
-) else if /I "%VCFMT%" == "vc142" (
-  for /f "usebackq delims=" %%i in (`vswhere.exe -version "[16.0,16.99]" -latest -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
-    set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
-  ) 
-  set "VCPlatformToolSet=v142"
 ) else if /I "%VCFMT%" == "gcc" (
  rem MinGW
 ) else (
@@ -135,6 +126,7 @@ if not ["%FREETYPE_DIR%"] == [""]      set "PATH=%FREETYPE_DIR%;%PATH%"
 if not ["%FREEIMAGE_DIR%"] == [""]     set "PATH=%FREEIMAGE_DIR%;%PATH%"
 if not ["%EGL_DIR%"] == [""]           set "PATH=%EGL_DIR%;%PATH%"
 if not ["%GLES2_DIR%"] == [""]         set "PATH=%GLES2_DIR%;%PATH%"
+if not ["%GL2PS_DIR%"] == [""]         set "PATH=%GL2PS_DIR%;%PATH%"
 if not ["%TBB_DIR%"] == [""]           set "PATH=%TBB_DIR%;%PATH%"
 if not ["%VTK_DIR%"] == [""]           set "PATH=%VTK_DIR%;%PATH%"
 if not ["%FFMPEG_DIR%"] == [""]        set "PATH=%FFMPEG_DIR%;%PATH%"
--- a/adm/templates/env.build.sh.in
+++ b/adm/templates/env.build.sh.in
@@ -1,137 +0,0 @@
-#!/bin/bash
-
-aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
-
-# ----- For compatability with external application using CASROOT -----
-if [ "${CASROOT}" == "" ]; then
-  export CASROOT="${aScriptPath}"
-fi
-
-# ----- Define path to 3rdparty products -----
-export THIRDPARTY_DIR="@3RDPARTY_DIR@"
-
-# ----- Read script arguments -----
-shopt -s nocasematch
-export CASDEB="";
-if [[ "$1" == "debug" ]]; then export CASDEB="d"; fi
-if [[ "$1" == "d" ]]; then export CASDEB="d"; fi
-if [[ "$1" == "relwithdeb" ]]; then export CASDEB="i"; fi
-if [[ "$1" == "i" ]]; then export CASDEB="i"; fi
-shopt -u nocasematch
-
-# ----- Set path to 3rd party and OCCT libraries -----
-anArch=`uname -m`
-if [ "$anArch" != "x86_64" ] && [ "$anArch" != "ia64" ]; then
-  export ARCH="32";
-else
-  export ARCH="64";
-fi
-
-aSystem=`uname -s`
-if [ "$aSystem" == "Darwin" ]; then
-  export WOKSTATION="mac";
-  export ARCH="64";
-else
-  export WOKSTATION="lin";
-fi
-
-# ----- Set local settings -----
-if [ -e "${CASROOT}/custom.sh" ]; then
-  source "${CASROOT}/custom.sh" "${CASDEB}" "${ARCH}"
-fi
-
-THRDPARTY_PATH=""
-if [ "$TCL_DIR" != "" ]; then
-  THRDPARTY_PATH="${TCL_DIR}:${THRDPARTY_PATH}"
-fi
-
-if [ "$TK_DIR" != "" ]; then
-  THRDPARTY_PATH="${TK_DIR}:${THRDPARTY_PATH}"
-fi
-
-if [ "$FREETYPE_DIR" != "" ]; then
-  THRDPARTY_PATH="${FREETYPE_DIR}:${THRDPARTY_PATH}"
-fi
-
-if [ "$FREEIMAGE_DIR" != "" ]; then
-  THRDPARTY_PATH="${FREEIMAGE_DIR}:${THRDPARTY_PATH}"
-fi
-
-if [ "$TBB_DIR" != "" ]; then
-  THRDPARTY_PATH="${TBB_DIR}:${THRDPARTY_PATH}"
-fi
-
-if [ "$VTK_DIR" != "" ]; then
-  THRDPARTY_PATH="${VTK_DIR}:${THRDPARTY_PATH}"
-fi
-
-if [ "$FFMPEG_DIR" != "" ]; then
-  THRDPARTY_PATH="${FFMPEG_DIR}:${THRDPARTY_PATH}"
-fi
-
-if [ "$QTDIR" != "" ]; then
-  THRDPARTY_PATH="${QTDIR}/lib:${THRDPARTY_PATH}"
-fi
-
-if [ "$TK_DIR" != "$TCL_DIR" ]; then
-  if [ "$TK_DIR" != "" ]; then
-    export TK_LIBRARY="${TK_DIR}/../lib/tk${TK_VERSION_WITH_DOT}"
-  fi
-  if [ "$TCL_DIR" != "" ]; then
-    export TCL_LIBRARY="${TCL_DIR}/../lib/tcl${TCL_VERSION_WITH_DOT}"
-  fi
-fi
-
-if [ "$LD_LIBRARY_PATH" != "" ]; then
-  export LD_LIBRARY_PATH="${THRDPARTY_PATH}:${LD_LIBRARY_PATH}"
-else
-  export LD_LIBRARY_PATH="${THRDPARTY_PATH}"
-fi
-
-if [ "$CSF_OCCTBinPath" != "" ]; then
-  export PATH="${CSF_OCCTBinPath}:${PATH}"
-fi
-
-if [ "$CSF_OCCTLibPath" != "" ]; then
-  if [ "$LD_LIBRARY_PATH" != "" ]; then
-    export LD_LIBRARY_PATH="${CSF_OCCTLibPath}:${LD_LIBRARY_PATH}"
-  else
-    export LD_LIBRARY_PATH="${CSF_OCCTLibPath}"
-  fi
-fi
-
-if [ "$WOKSTATION" == "mac" ]; then
-  if [ "$DYLD_LIBRARY_PATH" != "" ]; then
-    export DYLD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${DYLD_LIBRARY_PATH}"
-  else
-    export DYLD_LIBRARY_PATH="${LD_LIBRARY_PATH}"
-  fi
-fi
-
-# ----- Set envoronment variables used by OCCT -----
-export CSF_LANGUAGE=us
-export MMGT_CLEAR=1
-export CSF_SHMessage="${CSF_OCCTResourcePath}/SHMessage"
-export CSF_MDTVTexturesDirectory="${CSF_OCCTResourcePath}/Textures"
-export CSF_ShadersDirectory="${CSF_OCCTResourcePath}/Shaders"
-export CSF_XSMessage="${CSF_OCCTResourcePath}/XSMessage"
-export CSF_TObjMessage="${CSF_OCCTResourcePath}/TObj"
-export CSF_StandardDefaults="${CSF_OCCTResourcePath}/StdResource"
-export CSF_PluginDefaults="${CSF_OCCTResourcePath}/StdResource"
-export CSF_XCAFDefaults="${CSF_OCCTResourcePath}/StdResource"
-export CSF_TObjDefaults="${CSF_OCCTResourcePath}/StdResource"
-export CSF_StandardLiteDefaults="${CSF_OCCTResourcePath}/StdResource"
-export CSF_IGESDefaults="${CSF_OCCTResourcePath}/XSTEPResource"
-export CSF_STEPDefaults="${CSF_OCCTResourcePath}/XSTEPResource"
-export CSF_XmlOcafResource="${CSF_OCCTResourcePath}/XmlOcafResource"
-export CSF_MIGRATION_TYPES="${CSF_OCCTResourcePath}/StdResource/MigrationSheet.txt"
-
-# ----- Draw Harness special stuff -----
-if [ -e "${CSF_OCCTResourcePath}/DrawResources" ]; then
-  export DRAWHOME="${CSF_OCCTResourcePath}/DrawResources"
-  export CSF_DrawPluginDefaults="${CSF_OCCTResourcePath}/DrawResources"
-
-  if [ -e "${CSF_OCCTResourcePath}/DrawResources/DrawDefault" ]; then
-    export DRAWDEFAULT="${CSF_OCCTResourcePath}/DrawResources/DrawDefault"
-  fi
-fi
--- a/adm/templates/env.sh
+++ b/adm/templates/env.sh
@@ -6,17 +6,16 @@ aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath
 # Reset values
 export CASROOT="__CASROOT__"
 export CASDEB=""
-export PRJFMT="";
+export TARGET="";
 export HAVE_TBB="false";
 export HAVE_OPENCL="false";
 export HAVE_FREEIMAGE="false";
 export HAVE_FFMPEG="false";
+export HAVE_GL2PS="false";
 export HAVE_VTK="false";
 export HAVE_GLES2="false";
 export HAVE_ZLIB="false";
 export HAVE_LIBLZMA="false";
-export HAVE_RAPIDJSON="false";
-export HAVE_E57="false";
 export MACOSX_USE_GLX="false";
 export CSF_OPT_INC=""
 export CSF_OPT_LIB32=""
@@ -42,9 +41,9 @@ do
  elif [ "$i" == "i" ] || [ "$i" == "relwithdeb" ]; then
    export CASDEB="i"
  elif [ "$i" == "cbp" ]; then
-    export PRJFMT="cbp";
+    export TARGET="cbp";
  elif [ "$i" == "xcd" ] || [ "$i" == "xcode" ]; then
-    export PRJFMT="xcd";
+    export TARGET="xcd";
  fi
 done
 shopt -u nocasematch
@@ -66,32 +65,28 @@ else
 fi

 export CASBIN=""
-if [ "${PRJFMT}" == "xcd" ]; then
+if [ "${TARGET}" == "cbp" ]; then
+  export CASBIN="${WOKSTATION}/cbp"
+elif [ "${TARGET}" == "xcd" ]; then
  export CASBIN="adm/mac/xcd/build"
-else
-  if [ "$aSystem" == "Darwin" ]; then
-    export CASBIN="${WOKSTATION}/clang"
-  else
-    export CASBIN="${WOKSTATION}/gcc"
-  fi
 fi

 export CSF_OPT_INC="${CSF_OPT_INC}:${CASROOT}/inc"

-if [ "${PRJFMT}" == "xcd" ]; then
-  export CSF_OPT_LIB32D="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/Debug"
-  export CSF_OPT_LIB64D="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/Debug"
-  export CSF_OPT_LIB32="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/Release"
-  export CSF_OPT_LIB64="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/Release"
-  export CSF_OPT_LIB32I="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/RelWithDebInfo"
-  export CSF_OPT_LIB64I="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/RelWithDebInfo"
-else
+if [ "${TARGET}" == "cbp" ]; then
  export CSF_OPT_LIB32D="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/libd"
  export CSF_OPT_LIB64D="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/libd"
  export CSF_OPT_LIB32="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/lib"
  export CSF_OPT_LIB64="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/lib"
  export CSF_OPT_LIB32I="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/libi"
  export CSF_OPT_LIB64I="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/libi"
+elif [ "${TARGET}" == "xcd" ]; then
+  export CSF_OPT_LIB32D="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/Debug"
+  export CSF_OPT_LIB64D="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/Debug"
+  export CSF_OPT_LIB32="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/Release"
+  export CSF_OPT_LIB64="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/Release"
+  export CSF_OPT_LIB32I="${CSF_OPT_LIB32}:${CASROOT}/${CASBIN}/RelWithDebInfo"
+  export CSF_OPT_LIB64I="${CSF_OPT_LIB64}:${CASROOT}/${CASBIN}/RelWithDebInfo"
 fi

 export CSF_OPT_CMPL=""
@@ -101,12 +96,11 @@ if [ "$HAVE_TBB"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -D
 if [ "$HAVE_OPENCL"    == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_OPENCL"; fi
 if [ "$HAVE_FREEIMAGE" == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_FREEIMAGE"; fi
 if [ "$HAVE_FFMPEG"    == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_FFMPEG"; fi
+if [ "$HAVE_GL2PS"     == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_GL2PS"; fi
 if [ "$HAVE_GLES2"     == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_GLES2"; fi
 if [ "$HAVE_VTK"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_VTK"; fi
 if [ "$HAVE_ZLIB"      == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_ZLIB"; fi
 if [ "$HAVE_LIBLZMA"   == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_LIBLZMA"; fi
-if [ "$HAVE_RAPIDJSON" == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_RAPIDJSON"; fi
-if [ "$HAVE_E57"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_E57"; fi
 # Option to compile OCCT with X11 libs on Mac OS X
 if [ "$MACOSX_USE_GLX" == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DMACOSX_USE_GLX"; fi

@@ -182,7 +176,7 @@ export CSF_OCCTSamplesPath="${CSF_OCCTSamplesPath:-$CASROOT/samples}"
 export CSF_OCCTDataPath="${CSF_OCCTDataPath:-$CASROOT/data}"
 export CSF_OCCTTestsPath="${CSF_OCCTTestsPath:-$CASROOT/tests}"

-if [ "${PRJFMT}" == "xcd" ]; then
+if [ "${TARGET}" == "xcd" ]; then
  if [ "${CASDEB}" == "d" ]; then
    export CSF_OCCTBinPath="${CSF_OCCTBinPath:-$CASROOT/$CASBIN/Debug}"
  else
--- a/adm/templates/env.install.sh.in
+++ b/adm/templates/env.install.sh.in
@@ -57,6 +57,10 @@ if [ "$FREEIMAGE_DIR" != "" ]; then
  THRDPARTY_PATH="${FREEIMAGE_DIR}:${THRDPARTY_PATH}"
 fi

+if [ "$GL2PS_DIR" != "" ]; then
+  THRDPARTY_PATH="${GL2PS_DIR}:${THRDPARTY_PATH}"
+fi
+
 if [ "$TBB_DIR" != "" ]; then
  THRDPARTY_PATH="${TBB_DIR}:${THRDPARTY_PATH}"
 fi
--- a/adm/templates/msvc.bat
+++ b/adm/templates/msvc.bat
@@ -1,11 +1,10 @@
@echo off
-rem This file has been generated by genproj.tcl script from CASROOT/adm/templates/msvc.bat

 rem Setup environment
 call "%~dp0env.bat" %1 %2 %3

 rem Define path to project file
-set "PRJFILE=%~dp0\adm\msvc\%VCVER%\__SOLUTION__.sln"
+set "PRJFILE=%~dp0\adm\msvc\%VCVER%\OCCT.sln"
 if not exist "%PRJFILE%" set "PRJFILE=%~dp0\adm\msvc\%VCVER%\Products.sln"
 if not "%4" == "" (
  set "PRJFILE=%4"
--- a/adm/templates/sample.bat
+++ b/adm/templates/sample.bat
@@ -16,16 +16,11 @@ if ["%1"] == [""] (
  echo    HLR
  echo    Animation
  echo    Convert
-  echo    AndroidQt
-  echo    FuncDemo
-  echo    IESample
-  echo    Tutorial
  PAUSE
  exit /B
 )

 call "%~dp0env.bat" %2 %3 %4
-if not ["%QTDIR%"] == [""] if exist "%QTDIR%\qml" if ["%QML2_IMPORT_PATH%"] == [""] set "QML2_IMPORT_PATH=%QTDIR%/qml"
 set "EXE_PATH=%CSF_OCCTBinPath%/%1.exe"

 if not exist "%EXE_PATH%" (
--- a/adm/templates/sample.sh
+++ b/adm/templates/sample.sh
@@ -1,35 +0,0 @@
-#!/bin/bash
-
-if [ "$1" == "" ]; then
-  echo Launch selected sample as follows:
-  echo   sample.sh SampleName d
-  echo or to use last sample build configuration:
-  echo   sample.sh SampleName
-  echo available samples:
-  echo    FuncDemo
-  echo    IESample
-  echo    Tutorial
-fi
-
-
-aCurrentPath="$PWD"
-aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
-
-source "${aScriptPath}/env.sh" "$2"
-
-if test "${QTDIR}" == ""; then
-  if [ -d "$QTDIR%\qml" ];
-    then export QML2_IMPORT_PATH="$QTDIR\qml";
-  fi
-fi
-
-export "EXE_PATH=$CSF_OCCTBinPath/$1"
-
-if [ ! -f "$EXE_PATH" ]; then
-  echo "Executable \"$EXE_PATH\" not found."
-  echo "Probably you didn't compile the application."
-  exit 1
-fi
-
-cd ${aCurrentPath}
-"$EXE_PATH"
--- a/adm/templates/template.vc10
+++ b/adm/templates/template.vc10
@@ -90,7 +90,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>MaxSpeed</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <StringPooling>true</StringPooling>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -107,10 +107,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
      <OutputFile>.\..\..\..\win32\__VCVER__\bin\__TKNAM__.dll</OutputFile>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\lib;$(CSF_OPT_LIB32);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
@@ -138,7 +138,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>Disabled</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
      <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -156,10 +156,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
      <OutputFile>.\..\..\..\win32\__VCVER__\bind\__TKNAM__.dll</OutputFile>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\libd;$(CSF_OPT_LIB32D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
@@ -186,7 +186,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>MaxSpeed</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <StringPooling>true</StringPooling>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -203,10 +203,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
      <OutputFile>.\..\..\..\win64\__VCVER__\bin\__TKNAM__.dll</OutputFile>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\lib;$(CSF_OPT_LIB64);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
@@ -234,7 +234,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>Disabled</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
      <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -252,10 +252,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
      <OutputFile>.\..\..\..\win64\__VCVER__\bind\__TKNAM__.dll</OutputFile>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\libd;$(CSF_OPT_LIB64D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
--- a/adm/templates/template.vc10x
+++ b/adm/templates/template.vc10x
@@ -85,7 +85,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>MaxSpeed</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <StringPooling>true</StringPooling>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -100,10 +100,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\lib;$(CSF_OPT_LIB32);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
      <GenerateDebugInformation>__VCReleasePDB__</GenerateDebugInformation>
@@ -130,7 +130,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>Disabled</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
      <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -146,10 +146,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win32\__VCVER__\libd;$(CSF_OPT_LIB32D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
      <GenerateDebugInformation>true</GenerateDebugInformation>
@@ -175,7 +175,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>MaxSpeed</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <StringPooling>true</StringPooling>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -190,10 +190,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\lib;$(CSF_OPT_LIB64);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
      <GenerateDebugInformation>__VCReleasePDB__</GenerateDebugInformation>
@@ -219,7 +219,7 @@
      <MultiProcessorCompilation>true</MultiProcessorCompilation>
      <Optimization>Disabled</Optimization>
      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
      <ExceptionHandling>Async</ExceptionHandling>
      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
      <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -235,10 +235,10 @@
    </ClCompile>
    <ResourceCompile>
      <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
    </ResourceCompile>
    <Link>
-      <AdditionalDependencies>__TKDEP__</AdditionalDependencies>
+      <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
      <SuppressStartupBanner>true</SuppressStartupBanner>
      <AdditionalLibraryDirectories>..\..\..\win64\__VCVER__\libd;$(CSF_OPT_LIB64D);%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
      <GenerateDebugInformation>true</GenerateDebugInformation>
@@ -248,11 +248,7 @@
    </Link>
  </ItemDefinitionGroup>
  <ItemGroup>
-__FILES__
-  </ItemGroup>
-  <ItemGroup>
-    <ResourceCompile Include="__XQTNAM__.rc" />
-  </ItemGroup>
+__FILES__  </ItemGroup>
  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
  <ImportGroup Label="ExtensionTargets">
  </ImportGroup>
--- a/adm/templates/template.vc7
+++ b/adm/templates/template.vc7
@@ -22,7 +22,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="TRUE"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="TRUE"
@@ -62,7 +62,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
@@ -89,7 +89,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
 				PrecompiledHeaderFile=".\..\..\..\win32\vc7\objd\__TKNAM__\__TKNAM__.pch"
@@ -131,7 +131,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
--- a/adm/templates/template.vc7x
+++ b/adm/templates/template.vc7x
@@ -22,7 +22,7 @@
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
 				AssemblerListingLocation=".\..\..\..\win32\vc7\objd\__XQTNAM__/"
@@ -61,7 +61,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
@@ -86,7 +86,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="TRUE"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="TRUE"
@@ -124,7 +124,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
--- a/adm/templates/template.vc8
+++ b/adm/templates/template.vc8
@@ -50,7 +50,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -70,7 +70,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool
@@ -148,7 +148,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -170,7 +170,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool
@@ -249,7 +249,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -268,7 +268,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool
@@ -347,7 +347,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -368,7 +368,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool
--- a/adm/templates/template.vc8x
+++ b/adm/templates/template.vc8x
@@ -49,7 +49,7 @@
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -68,7 +68,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES);"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__;"
 				Culture="1033"
 			/>
 			<Tool
@@ -145,7 +145,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -164,7 +164,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES);"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;"
 				Culture="1033"
 			/>
 			<Tool
@@ -240,7 +240,7 @@
 				AdditionalOptions="/favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -258,7 +258,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"
 			/>
 			<Tool
@@ -337,7 +337,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -355,7 +355,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"
 			/>
 			<Tool
--- a/adm/templates/template.vc9
+++ b/adm/templates/template.vc9
@@ -53,7 +53,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -73,7 +73,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -150,7 +150,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -172,7 +172,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -248,7 +248,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -267,7 +267,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -342,7 +342,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -363,7 +363,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
--- a/adm/templates/template.vc9x
+++ b/adm/templates/template.vc9x
@@ -52,7 +52,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -71,7 +71,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -143,7 +143,7 @@
 				AdditionalOptions="-MP"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -162,7 +162,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -236,7 +236,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -254,7 +254,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -327,7 +327,7 @@
 				AdditionalOptions="-MP -favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -345,7 +345,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
--- a/adm/templates/xcode.sh
+++ b/adm/templates/xcode.sh
@@ -1,8 +1,7 @@
 #!/bin/bash
-# This file has been generated by genproj.tcl script from CASROOT/adm/templates/xcode.sh

 export TARGET="xcd"

 source ./env.sh "$1" "$TARGET"

-open -a Xcode ./adm/mac/xcd/__SOLUTION__.xcworkspace
+open -a Xcode ./adm/mac/xcd/OCCT.xcworkspace
--- a/adm/upgrade.dat
+++ b/adm/upgrade.dat
@@ -1,76 +1,8 @@
 [rename]
-Adaptor3d_OffsetCurve Adaptor2d_OffsetCurve
 BRepExtrema_OverlappedSubShapes BRepExtrema_MapOfIntegerPackedMapOfInteger
 ShapeConstruct_CompBezierCurves2dToBSplineCurve2d Convert_CompBezierCurves2dToBSplineCurve2d
 ShapeConstruct_CompBezierCurves2dToBSplineCurve Convert_CompBezierCurves2dToBSplineCurve
 Image_PixMap::Img Image_Format_
-V3d_TypeOfShadingModel Graphic3d_TypeOfShadingModel
-Graphic3d_TOSM_NONE Graphic3d_TOSM_UNLIT
-V3d_COLOR Graphic3d_TOSM_UNLIT
-V3d_FLAT Graphic3d_TOSM_FACET
-V3d_GOURAUD Graphic3d_TOSM_VERTEX
-V3d_PHONG Graphic3d_TOSM_FRAGMENT
-V3d_TypeOfLight Graphic3d_TypeOfLightSource
-V3d_AMBIENT Graphic3d_TOLS_AMBIENT
-V3d_DIRECTIONAL Graphic3d_TOLS_DIRECTIONAL
-V3d_POSITIONAL Graphic3d_TOLS_POSITIONAL
-V3d_SPOT Graphic3d_TOLS_SPOT
-BOPCol_BaseAllocator Handle(NCollection_BaseAllocator)
-BOPCol_BoxBndTree is replaced with BOPTools_BoxBndTree
-BOPCol_DataMapOfIntegerInteger TColStd_DataMapOfIntegerInteger
-BOPCol_DataMapOfIntegerListOfInteger TColStd_DataMapOfIntegerListOfInteger
-BOPCol_DataMapOfIntegerListOfShape TopTools_DataMapOfIntegerListOfShape
-BOPCol_DataMapOfIntegerReal TColStd_DataMapOfIntegerReal
-BOPCol_DataMapOfIntegerShape TopTools_DataMapOfIntegerShape
-BOPCol_DataMapOfShapeBox TopTools_DataMapOfShapeBox
-BOPCol_DataMapOfShapeInteger TopTools_DataMapOfShapeInteger
-BOPCol_DataMapOfShapeListOfShape TopTools_DataMapOfShapeListOfShape
-BOPCol_DataMapOfShapeReal TopTools_DataMapOfShapeReal
-BOPCol_DataMapOfShapeShape TopTools_DataMapOfShapeShape
-BOPCol_IndexedDataMapOfShapeListOfShape TopTools_IndexedDataMapOfShapeListOfShape
-BOPCol_IndexedDataMapOfShapeShape TopTools_IndexedDataMapOfShapeShape
-BOPCol_IndexedMapOfInteger TColStd_IndexedMapOfInteger
-BOPCol_IndexedMapOfOrientedShape TopTools_IndexedMapOfOrientedShape
-BOPCol_IndexedMapOfShape TopTools_IndexedMapOfShape
-BOPCol_ListOfInteger TColStd_ListOfInteger
-BOPCol_ListOfListOfShape TopTools_ListOfListOfShape
-BOPCol_ListOfShape TopTools_ListOfShape
-BOPCol_MapOfInteger TColStd_MapOfInteger
-BOPCol_MapOfOrientedShapeTopTools_MapOfOrientedShape
-BOPCol_MapOfShape TopTools_MapOfShape
-BOPCol_SequenceOfPnt2d TColgp_SequenceOfPnt2d
-BOPCol_SequenceOfReal TColStd_SequenceOfReal
-BOPCol_SequenceOfShape TopTools_SequenceOfShape 
-BOPCol_Parallel BOPTools_Parallel
-BOPCol_NCVector NCollection_Vector
-BOPCol_DataMapOfShapeAddress DataMapOfShapeAddress
-BOPCol_DataMapOfTransientAddress DataMapOfTransientAddress
-BOPCol_DataMapIteratorOfDataMapOfIntegerReal TColStd_DataMapIteratorOfDataMapOfIntegerReal
-BOPCol_DataMapIteratorOfDataMapOfShapeAddress DataMapOfShapeAddress::Iterator
-BOPCol_DataMapIteratorOfDataMapOfTransientAddress DataMapOfTransientAddress::Iterator
-BOPCol_ListIteratorOfListOfInteger TColStd_ListIteratorOfListOfInteger
-BOPCol_ListIteratorOfListOfShape TopTools_ListIteratorOfListOfShape
-BOPCol_MapIteratorOfMapOfInteger TColStd_MapIteratorOfMapOfInteger
-BOPCol_BoxBndTreeSelector BOPTools_BoxBndTreeSelector
-BOPCol_BoxBndTree BOPTools_BoxBndTree
-BOPCol_PListOfInteger TColStd_ListOfInteger*
-BOPCol_IndexedDataMapOfShapeReal TopTools_IndexedDataMapOfShapeReal
-BOPCol_MapOfOrientedShape TopTools_MapOfOrientedShape
-BOPCol_DataMapIteratorOfDataMapOfIntegerInteger TColStd_DataMapIteratorOfDataMapOfIntegerInteger
-BOPCol_MapIteratorOfMapOfShape TopTools_MapIteratorOfMapOfShape
-BOPCol_ContextFunctor BOPTools_ContextFunctor
-BOPCol_ContextCnt BOPTools_ContextCnt
-BOPCol_Functor BOPTools_Functor
-BOPCol_Cnt BOPTools_Cnt
-BOPCol_DataMapIteratorOfDataMapOfIntegerListOfShape TopTools_DataMapIteratorOfDataMapOfIntegerListOfShape
-BOPCol_MapIteratorOfMapOfOrientedShape TopTools_MapIteratorOfMapOfOrientedShape
-BOPCol_DataMapIteratorOfDataMapOfIntegerListOfInteger TColStd_DataMapIteratorOfDataMapOfIntegerListOfInteger
-BOPCol_DataMapIteratorOfDataMapOfShapeShape TopTools_DataMapIteratorOfDataMapOfShapeShape
-BOPTools::MapShapes TopExp::MapShapes
-BOPTools::MapShapesAndAncestors TopExp::MapShapesAndAncestors
-BOPCol_Box2DBndTreeSelector BOPTools_BoxSelector<Bnd_Box2d>
-BiTgte_DataMapOfShapeBox TopTools_DataMapOfShapeBox
-CDM_MessageDriver Message_Messenger

 [tcollection]
 AdvApp2Var_SequenceOfNode
--- a/data/occ/Box.brep
+++ b/data/occ/Box.brep
@@ -0,0 +1,282 @@
+DBRep_DrawableShape
+
+CASCADE Topology V1, (c) Matra-Datavision
+Locations 0
+Curve2ds 24
+1 0 0 1 0 
+1 0 0 1 0 
+1 50 0 0 -1 
+1 0 0 0 1 
+1 0 -80 1 0 
+1 0 0 1 0 
+1 0 0 0 -1 
+1 0 0 0 1 
+1 0 0 1 0 
+1 0 77 1 0 
+1 50 0 0 -1 
+1 77 0 0 1 
+1 0 -80 1 0 
+1 0 77 1 0 
+1 0 0 0 -1 
+1 77 0 0 1 
+1 0 0 0 1 
+1 0 0 1 0 
+1 50 0 0 1 
+1 0 0 1 0 
+1 0 0 0 1 
+1 0 80 1 0 
+1 50 0 0 1 
+1 0 80 1 0 
+Curves 12
+1 821 803 0 0 0 1 
+1 821 803 50 0 1 0 
+1 821 883 0 0 0 1 
+1 821 803 0 0 1 0 
+1 898 803 0 0 0 1 
+1 898 803 50 0 1 0 
+1 898 883 0 0 0 1 
+1 898 803 0 0 1 0 
+1 821 803 0 1 0 0 
+1 821 803 50 1 0 0 
+1 821 883 0 1 0 0 
+1 821 883 50 1 0 0 
+Polygon3D 0
+PolygonOnTriangulations 0
+Surfaces 6
+1 821 803 0 1 0 0 0 0 1 0 -1 0 
+1 821 803 0 0 1 0 0 0 1 1 0 0 
+1 821 803 50 0 0 1 1 0 0 0 1 0 
+1 821 883 0 0 1 0 0 0 1 1 0 0 
+1 821 803 0 0 0 1 1 0 0 0 1 0 
+1 898 803 0 1 0 0 0 0 1 0 -1 0 
+Triangulations 0
+
+TShapes 34
+Ve
+1e-007
+821 803 50
+0 0
+
+0101100
+*
+Ve
+1e-007
+821 803 0
+0 0
+
+0101100
+*
+Ed
+ 1e-007 1 1 0
+1  1 0 0 50
+2  1 1 0 0 50
+2  2 2 0 0 50
+0
+
+0101000
+-34 0 +33 0 *
+Ve
+1e-007
+821 883 50
+0 0
+
+0101100
+*
+Ed
+ 1e-007 1 1 0
+1  2 0 0 80
+2  3 1 0 0 80
+2  4 3 0 0 80
+0
+
+0101000
+-31 0 +34 0 *
+Ve
+1e-007
+821 883 0
+0 0
+
+0101100
+*
+Ed
+ 1e-007 1 1 0
+1  3 0 0 50
+2  5 1 0 0 50
+2  6 4 0 0 50
+0
+
+0101000
+-31 0 +29 0 *
+Ed
+ 1e-007 1 1 0
+1  4 0 0 80
+2  7 1 0 0 80
+2  8 5 0 0 80
+0
+
+0101000
+-29 0 +33 0 *
+Wi
+
+0101000
+-32 0 -30 0 +28 0 +27 0 *
+Fa
+0  1e-007 1 0
+
+0111000
+26 0 *
+Ve
+1e-007
+898 803 50
+0 0
+
+0101100
+*
+Ve
+1e-007
+898 803 0
+0 0
+
+0101100
+*
+Ed
+ 1e-007 1 1 0
+1  5 0 0 50
+2  9 6 0 0 50
+2  10 2 0 0 50
+0
+
+0101000
+-24 0 +23 0 *
+Ve
+1e-007
+898 883 50
+0 0
+
+0101100
+*
+Ed
+ 1e-007 1 1 0
+1  6 0 0 80
+2  11 6 0 0 80
+2  12 3 0 0 80
+0
+
+0101000
+-21 0 +24 0 *
+Ve
+1e-007
+898 883 0
+0 0
+
+0101100
+*
+Ed
+ 1e-007 1 1 0
+1  7 0 0 50
+2  13 6 0 0 50
+2  14 4 0 0 50
+0
+
+0101000
+-21 0 +19 0 *
+Ed
+ 1e-007 1 1 0
+1  8 0 0 80
+2  15 6 0 0 80
+2  16 5 0 0 80
+0
+
+0101000
+-19 0 +23 0 *
+Wi
+
+0101000
+-22 0 -20 0 +18 0 +17 0 *
+Fa
+0  1e-007 6 0
+
+0111000
+16 0 *
+Ed
+ 1e-007 1 1 0
+1  9 0 0 77
+2  17 2 0 0 77
+2  18 5 0 0 77
+0
+
+0101000
+-23 0 +33 0 *
+Ed
+ 1e-007 1 1 0
+1  10 0 0 77
+2  19 2 0 0 77
+2  20 3 0 0 77
+0
+
+0101000
+-24 0 +34 0 *
+Wi
+
+0101000
+-14 0 -22 0 +13 0 +32 0 *
+Fa
+0  1e-007 2 0
+
+0111000
+12 0 *
+Ed
+ 1e-007 1 1 0
+1  11 0 0 77
+2  21 4 0 0 77
+2  22 5 0 0 77
+0
+
+0101000
+-19 0 +29 0 *
+Ed
+ 1e-007 1 1 0
+1  12 0 0 77
+2  23 4 0 0 77
+2  24 3 0 0 77
+0
+
+0101000
+-21 0 +31 0 *
+Wi
+
+0101000
+-10 0 -18 0 +9 0 +28 0 *
+Fa
+0  1e-007 4 0
+
+0111000
+8 0 *
+Wi
+
+0101000
+-27 0 -10 0 +17 0 +14 0 *
+Fa
+0  1e-007 5 0
+
+0111000
+6 0 *
+Wi
+
+0101000
+-30 0 -9 0 +20 0 +13 0 *
+Fa
+0  1e-007 3 0
+
+0111000
+4 0 *
+Sh
+
+0101100
+-25 0 +15 0 -11 0 +7 0 -5 0 +3 0 *
+So
+
+1100000
+2 0 *
+
+1 0 
--- a/dox/CMakeLists.txt
+++ b/dox/CMakeLists.txt
@@ -89,14 +89,6 @@ file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nEXTERNAL_SEARCH        = NO")
 # Formula options
 file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nMATHJAX_RELPATH        = ${3RDPARTY_MATHJAX_RELATIVE_PATH}")

-# If MSVC is used as build system, change warning format to the one recognized by MSVC
-if (MSVC)
-  file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nWARN_FORMAT            = \"$file($line): $text\"")
-endif()
-
-# Avoid Doxygen parsing messages in the build log
-file (APPEND ${OCCT_CONFIG_FOR_DOXYGEN} "\nQUIET                  = YES")
-
 # Copy index file to provide fast access to HTML documentation
 file(COPY "${OCCT_OVERVIEW_RESOURCE_DIR}/index.html" DESTINATION "${OCCT_GENERATED_OVERVIEW_DIR}")

--- a/dox/dev_guides/building/3rdparty/3rdparty_linux.md
+++ b/dox/dev_guides/building/3rdparty/3rdparty_linux.md
@@ -10,7 +10,7 @@ products used by Open CASCADE Technology and samples on Linux platform.

 The links for downloading the third-party products are available on the web site 
 of OPEN CASCADE SAS at 
-https://www.opencascade.com/content/3rd-party-components.
+http://www.opencascade.com/content/3rd-party-components. 

 There are two types of third-party products, which are  necessary to build OCCT: 
  
@@ -19,6 +19,7 @@ There are two types of third-party products, which are  necessary to build OCCT:
 	* FreeType 2.4.10 - 2.5.3;
 * Optional  products: 
 	* TBB 3.x - 4.x;
+	* gl2ps 1.3.5 - 1.3.8;
 	* FreeImage 3.14.1 - 3.16.0;
 	* VTK 6.1.0.

@@ -30,7 +31,7 @@ Tcl/Tk is required for DRAW test harness.

@subsubsection dev_guides__building_3rdparty_linux_2_1_2 Installation from sources: Tcl
  
-Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
+Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 
  
 1. Enter the unix sub-directory of the directory where the Tcl source  files are located <i>(TCL_SRC_DIR)</i>. 

@@ -53,7 +54,7 @@ Download the necessary archive from https://www.tcl.tk/software/tcltk/download.h

@subsubsection dev_guides__building_3rdparty_linux_2_1_3 Installation from sources: Tk
  
-Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
+Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 
  
 1. Enter the unix sub-directory of the directory where the Tk source files are located <i>(TK_SRC_DIR)</i> 

@@ -78,7 +79,7 @@ Download the necessary archive from https://www.tcl.tk/software/tcltk/download.h
@subsection dev_guides__building_3rdparty_linux_2_2 FreeType

 FreeType is required for text display in the 3D viewer. 
-Download the necessary archive from https://sourceforge.net/projects/freetype/files/ and unpack it.
+Download the necessary archive from http://sourceforge.net/projects/freetype/files/ and unpack it. 
  
 1. Enter the directory where the source files of FreeType  are located <i>(FREETYPE_SRC_DIR)</i>. 

@@ -103,13 +104,39 @@ Download the necessary archive from https://sourceforge.net/projects/freetype/fi
    
@subsection dev_guides__building_3rdparty_linux_3_1 TBB

-This third-party product is  installed with binaries from the archive that can be downloaded from https://github.com/intel/tbb.
+This third-party product is  installed with binaries from the archive that can be downloaded from http://threadingbuildingblocks.org. 
 Go to the **Download** page, find the  release version you need and pick the archive for Linux platform.
 To install, unpack the downloaded archive of TBB product.

+@subsection dev_guides__building_3rdparty_linux_3_2 gl2ps
+
+Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.
+  
+1. Install or build *cmake* product from the source file. 
+2. Start *cmake* in GUI mode with the directory where the source files of gl2ps are located:
+
+       ccmake GL2PS_SRC_DIR   
+
+   * Press <i>[c]</i> to make the  initial configuration; 
+   * Define the necessary options in *CMAKE_INSTALL_PREFIX* 
+   * Press <i>[c]</i> to make the final  configuration 
+   * Press <i>[g]</i> to generate  Makefile and exit 
+
+   or just run the following command: 
+
+       cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
+
+3. Start the building of gl2ps: 
+
+       make   
+
+4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option. 
+
+       make install   
+
@subsection dev_guides__building_3rdparty_linux_3_3 FreeImage

-Download the necessary archive from https://sourceforge.net/projects/freeimage/files/Source%20Distribution/
+Download the necessary archive from http://sourceforge.net/projects/freeimage/files/Source%20Distribution/
 and unpack it. The directory with unpacked sources is  further referred to as *FREEIMAGE_SRC_DIR*. 
  
 1. Modify *FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h*: 
@@ -174,11 +201,11 @@ and unpack it. The directory with unpacked sources is  further referred to as *F

@subsection dev_guides__building_3rdparty_linux_3_4 VTK

-You can download VTK sources from https://www.vtk.org/VTK/resources/software.html
+You can download VTK sources from http://www.vtk.org/VTK/resources/software.html

 ### The building procedure:

-Download the necessary archive from https://www.vtk.org/VTK/resources/software.html and unpack it.
+Download the necessary archive from http://www.vtk.org/VTK/resources/software.html and unpack it.

 1. Install or build *cmake* product from the source file.
 2. Start *cmake* in GUI mode with the directory where the source files of *VTK* are located:
@@ -194,7 +221,7 @@ Download the necessary archive from https://www.vtk.org/VTK/resources/software.h

       make

-4. Start the installation of VTK. Binaries will be installed according to the *VTK_INSTALL_PREFIX* option.
+4. Start the installation of gl2ps. Binaries will be  installed according to the *VTK_INSTALL_PREFIX* option.

       make install

@@ -205,7 +232,7 @@ Download the necessary archive from https://www.vtk.org/VTK/resources/software.h
 All 3rd-party products required for building of  OCCT could be installed
 from official repositories. You may install them from  console using apt-get utility:

-    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libxt-dev libxmu-dev libxi-dev libgl1-mesa-dev libglu1-mesa-dev libfreeimage-dev libtbb-dev
+    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libxt-dev libxmu-dev libxi-dev libgl1-mesa-dev libglu1-mesa-dev libfreeimage-dev libtbb-dev libgl2ps-dev

 To launch binaries built with WOK you need to install C shell and 32-bit libraries on x86_64 distributives:

--- a/dox/dev_guides/building/3rdparty/3rdparty_osx.md
+++ b/dox/dev_guides/building/3rdparty/3rdparty_osx.md
@@ -8,7 +8,7 @@ This document presents additional guidelines for building third-party products
 used by Open CASCADE Technology and samples on Mac OS X platform (10.6.4  and later). 

 The links for downloading the third-party products are available 
-on the web site of OPEN CASCADE SAS at https://www.opencascade.com/content/3rd-party-components.
+on the web site of OPEN CASCADE SAS at http://www.opencascade.com/content/3rd-party-components. 

 There are two types of third-party products, which are  necessary to build OCCT: 
  
@@ -17,6 +17,7 @@ There are two types of third-party products, which are  necessary to build OCCT:
 	* FreeType 2.4.10 - 2.5.3.
 * Optional  products: 
 	* TBB 3.x - 4.x;
+	* gl2ps  1.3.5 - 1.3.8;
 	* FreeImage 3.14.1 - 3.16.0
  
@section dev_guides__building_3rdparty_osx_2 Building Mandatory Third-party Products
@@ -27,7 +28,7 @@ Tcl/Tk is required for DRAW test harness. Version 8.5 or  8.6 can be used with O

@subsubsection dev_guides__building_3rdparty_osx_2_1_2 Installation from sources: Tcl 8.5

-Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
+Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 

 1. Enter the *macosx* sub-directory of the directory where the Tcl source files are located <i>(TCL_SRC_DIR)</i>. 

@@ -50,7 +51,7 @@ Download the necessary archive from https://www.tcl.tk/software/tcltk/download.h

@subsubsection dev_guides__building_3rdparty_osx_2_1_3 Installation from sources: Tk 8.5

-Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
+Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 

 1. Enter the *macosx* sub-directory of the directory where the  source files of Tk are located <i>(TK_SRC_DIR)</i>. 

@@ -74,7 +75,7 @@ Download the necessary archive from https://www.tcl.tk/software/tcltk/download.h
  
 FreeType is required for text display in the 3D viewer. 

-Download the necessary archive from https://sourceforge.net/projects/freetype/files/ and unpack it.
+Download the necessary archive from http://sourceforge.net/projects/freetype/files/ and unpack it. 

 1. Enter the directory where the source files of FreeType  are located <i>(FREETYPE_SRC_DIR)</i>. 

@@ -100,20 +101,47 @@ Download the necessary archive from https://sourceforge.net/projects/freetype/fi
@subsection dev_guides__building_3rdparty_osx_3_1 TBB 3.x or 4.x

 This third-party product is installed with binaries from the archive 
-that can be downloaded from https://github.com/intel/tbb.
+that can be downloaded from http://threadingbuildingblocks.org/. 
 Go to the **Download** page, find the release version you need (e.g. *tbb30_018oss*) 
 and  pick the archive for Mac OS X platform. 
 To install, unpack the downloaded archive of TBB 3.0 product (*tbb30_018oss_osx.tgz*).

+@subsection dev_guides__building_3rdparty_osx_3_2 gl2ps 1.3.5
+
+Download the necessary archive from http://geuz.org/gl2ps/ and unpack it. 
+
+1. Install or build cmake product from the source file. 
+
+2. Start cmake in GUI mode with the directory, where the source  files of *fl2ps* are located: 
+
+       ccmake GL2PS_SRC_DIR   
+
+   * Press <i>[c]</i> to make the  initial configuration; 
+   * Define the necessary options in *CMAKE_INSTALL_PREFIX*; 
+   * Press <i>[c]</i> to make the final  configuration; 
+   * Press <i>[g]</i> to generate  Makefile and exit. 
+
+   or just run the following command: 
+
+       cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
+
+3. Start the building of gl2ps 
+
+       make   
+
+4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option 
+
+       make install   
+
@subsection dev_guides__building_3rdparty_osx_3_3 FreeImage 3.14.1 or 3.15.x

 Download the necessary archive from 
-https://sourceforge.net/projects/freeimage/files/Source%20Distribution/
+http://sourceforge.net/projects/freeimage/files/Source%20Distribution/   
 and unpack it. The directory with unpacked sources is  further referred to as *FREEIMAGE_SRC_DIR*.  

 Note that for building FreeImage on Mac OS X 10.7 you should replace *Makefile.osx* 
 in *FREEIMAGE_SRC_DIR* by the corrected file, which you can find in attachment to issue #22811 in OCCT Mantis bug tracker 
-(https://tracker.dev.opencascade.org/file_download.php?file_id=6937&type=bug).
+(http://tracker.dev.opencascade.org/file_download.php?file_id=6937&type=bug). 

 1. If you build FreeImage 3.15.x you can skip this  step. 
   Modify <i>FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h:</i> 
--- a/dox/dev_guides/building/3rdparty/3rdparty_windows.md
+++ b/dox/dev_guides/building/3rdparty/3rdparty_windows.md
@@ -8,7 +8,7 @@ This document presents guidelines for building third-party products used by Open

 You need to use the same version of MS Visual Studio for building all third-party products and OCCT itself, in order to receive a consistent set of run-time binaries. 

-The links for downloading the third-party products are available on the web site of OPEN CASCADE SAS at https://www.opencascade.com/content/3rd-party-components.
+The links for downloading the third-party products are available on the web site of OPEN CASCADE SAS at http://www.opencascade.com/content/3rd-party-components.

 There are two types of third-party products used  by OCCT: 

@@ -17,6 +17,7 @@ There are two types of third-party products used  by OCCT:
 	* FreeType 2.4.10 -- 2.5.3.
 * Optional  products:
 	* TBB 3.x -- 4.x;
+	* gl2ps 1.3.5 -- 1.3.8;
 	* FreeImage 3.14.1 -- 3.16.0;
 	* VTK 6.1.0.

@@ -32,7 +33,7 @@ Tcl/Tk is required for DRAW test harness.

@subsubsection dev_guides__building_3rdparty_win_2_1_1 Installation from sources: Tcl
  
-Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
+Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 
  
 1. In the *win* sub-directory, edit file *buildall.vc.bat*:

@@ -85,7 +86,7 @@ Download the necessary archive from https://www.tcl.tk/software/tcltk/download.h

@subsubsection dev_guides__building_3rdparty_win_2_1_2 Installation from sources: Tk
  
-Download the necessary archive from https://www.tcl.tk/software/tcltk/download.html and unpack it.
+Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 

 Apply the same steps as described for building Tcl above, with the same INSTALLDIR.
 Note that Tk produces its own executable, called *wish*. 
@@ -94,7 +95,7 @@ You might need to edit default value of *TCLDIR* variable defined in *buildall.v

@subsection dev_guides__building_3rdparty_win_2_2 FreeType

-FreeType is required for text display in a 3D viewer. You can download its sources from https://sourceforge.net/projects/freetype/files/
+FreeType is required for text display in a 3D viewer. You can download its sources from http://sourceforge.net/projects/freetype/files/   

 ### The building procedure

@@ -148,18 +149,97 @@ FreeType is required for text display in a 3D viewer. You can download its sourc
@subsection dev_guides__building_3rdparty_win_3_1 TBB

 This third-party product is installed with binaries 
-from the archive that can be downloaded from https://github.com/intel/tbb.
+from the archive that can be downloaded from http://threadingbuildingblocks.org/. 
 Go to the **Download** page, find the  release version you need  (e.g. *tbb30_018oss*) and pick the archive for Windows  platform. 

 Unpack the downloaded  archive of TBB product into the *3rdparty* folder. 

 Further in this document,  this folder is referred to as *tbb*. 

+@subsection dev_guides__building_3rdparty_win_3_2  gl2ps
+
+This third-party product should be built as a dynamically loadable library (dll file). 
+You can download its sources from  http://geuz.org/gl2ps/src/. 
+
+### The building procedure
+
+1. Unpack the downloaded  archive of gl2ps product (e.g. *gl2ps-1.3.5.tgz*) into the *3rdparty*  folder. 
+
+   As a result, you will get a folder named, for example, *3rdparty\\gl2ps-1.3.5-source*. 
+
+   Rename it into <i>gl2ps-platform-compiler-building mode</i>, where 
+   * **platform** -- *win32*  or *win64*; 
+   * **compiler** -- *vc8*, *vc9* or *vc10*; 
+   * **building mode** -- *opt*  (for release) or *deb* (for debug). 
+   
+   For example, <i>gl2ps-win64-vc10-deb</i>
+
+   Further in this document,  this folder is referred to as *gl2ps*. 
+
+2. Download (from http://www.cmake.org/cmake/resources/software.html) 
+   and install the *CMake* build system.  
+
+3. Edit the file *gl2ps\\CMakeLists.txt*. 
+
+   After line 113 in *CMakeLists.txt*: 
+
+       set_target_properties(shared PROPERTIES  COMPILE_FLAGS \"-DGL2PSDLL -DGL2PSDLL_EXPORTS\")
+    
+   add the following line:   
+    
+       add_definitions(-D_USE_MATH_DEFINES)  
+
+   Attention: If Cygwin was installed on  your computer, make sure that there is no path to it in the *PATH* variable to avoid possible conflicts during the configuration. 
+
+4. Launch CMake <i>(cmake-gui.exe)</i> using  the Program menu. 
+
+   In CMake: 
+  
+   * Define where the source code is. 
+     This path must point to *gl2ps*  folder. 
+
+   * Define where to build the  binaries. 
+     This path must point to the folder where generated gl2ps project binaries will be placed 
+     (for example, *gl2ps\\bin*). 
+     Further in this document, this folder is referred to as *gl2ps_bin*.
+
+   * Press  **Configure** button. 
+   
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image004.png}
+
+   * Select the generator (the compiler  and the target platform -- 32 or 64 bit) in the pop-up window. 
+   
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image005.png}
+
+   * Press **Finish** button to  return to the main CMake window. 
+     Expand the ENABLE group and uncheck  ENABLE_PNG and ENABLE_ZLIB check boxes. 
+	 
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image006.png}
+
+   * Expand the CMAKE group and define *CMAKE_INSTALL_PREFIX* which is the path where you want to install the build results, for example, *c:\\occ3rdparty\\gl2ps-1.3.5*. 
+   
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image007.png}
+
+   * Press **Configure** button again, then press **Generate** button to generate Visual Studio projects. After completion, close CMake application. 
+
+5. Open the solution file *gl2ps_bin\\gl2ps.sln* in Visual Studio. 
+
+   * Select a configuration to build 
+     * Choose **Release** to build Release binaries. 
+     * Choose **Debug** to build Debug binaries. 
+   * Select a platform to build. 
+     * Choose **Win32** to build for a 32 bit platform. 
+     * Choose **x64** to build for a 64 bit platform. 
+   * Build the solution. 
+   * Build the *INSTALL* project. 
+    
+As a  result, you should have the installed gl2ps product in the *CMAKE_INSTALL_PREFIX* path. 
+
@subsection dev_guides__building_3rdparty_win_3_3 FreeImage

 This third-party product should be built as a dynamically loadable library (.dll file). 
 You can download its sources from 
-https://sourceforge.net/projects/freeimage/files/Source%20Distribution/
+http://sourceforge.net/projects/freeimage/files/Source%20Distribution/

 ### The building procedure: 

@@ -232,7 +312,7 @@ VTK is an open-source, freely available software system for 3D computer graphics

 ### The building procedure:

-1. Download the necessary archive from https://www.vtk.org/VTK/resources/software.html and unpack it into *3rdparty* folder.
+1. Download the necessary archive from http://www.vtk.org/VTK/resources/software.html and unpack it into *3rdparty* folder.

   As a result, you will get a folder named, for example, <i>3rdparty\VTK-6.1.0.</i>

--- a/dox/dev_guides/building/3rdparty/images/genconf_linux.png
+++ b/dox/dev_guides/building/3rdparty/images/genconf_linux.png
--- a/dox/dev_guides/building/3rdparty/images/genconf_windows.png
+++ b/dox/dev_guides/building/3rdparty/images/genconf_windows.png
--- a/dox/dev_guides/building/android/android.md
+++ b/dox/dev_guides/building/android/android.md
@@ -10,9 +10,9 @@ The steps on Windows and Ubuntu are similar. There is the only one difference: m
 on Windows and native GNU make on Ubuntu.

 Required tools (download and install if it is required):
-  - CMake v3.7+ https://www.cmake.org/cmake/resources/software.html
+  - CMake v3.7+ http://www.cmake.org/cmake/resources/software.html
  - Android NDK rev.10+ https://developer.android.com/tools/sdk/ndk/index.html
-  - GNU Make: MinGW v4.82+ for Windows (https://sourceforge.net/projects/mingw/files/), GNU Make 4.0 for Ubuntu.
+  - GNU Make: MinGW v4.82+ for Windows (http://sourceforge.net/projects/mingw/files/), GNU Make 4.0 for Ubuntu. 

 ## Prerequisites

--- a/dox/dev_guides/building/building.md
+++ b/dox/dev_guides/building/building.md
@@ -6,7 +6,7 @@ The list of required libraries depends on what OCCT modules will be used, and yo
 The typical minimum is **Freetype** (necessary for Visualization) and **Tcl/Tk** (for DRAW Test Harness).
 See "Third-party libraries" section in \ref OCCT_OVW_SECTION_5 "Overview" for a full list.

-On Windows, the easiest way to install third-party libraries is to download archive with pre-built binaries from https://www.opencascade.com/content/3rd-party-components.
+On Windows, the easiest way to install third-party libraries is to download archive with pre-built binaries from http://www.opencascade.com/content/3rd-party-components.
 On Linux and OS X, it is recommended to use the version installed in the system natively.

 You can also build third-party libraries from their sources:
--- a/dox/dev_guides/building/cmake/cmake.md
+++ b/dox/dev_guides/building/cmake/cmake.md
@@ -82,21 +82,21 @@ The following table gives the full list of environment variables used at the con
 |----------|------|---------|
 | CMAKE_BUILD_TYPE | String | Specifies the build type on single-configuration generators (such as make).  Possible values are Debug, Release and RelWithDebInfo |
 | USE_FREEIMAGE | Boolean flag | Indicates whether FreeImage product should be used in OCCT visualization module for support of popular graphics image formats (PNG, BMP, etc.) |
-| USE_RAPIDJSON | Boolean flag | Indicates whether RapidJSON product should be used in OCCT Data Exchange module for support of glTF mesh file format |
+| USE_GL2PS | Boolean flag | Indicates whether GL2PS product should be used in OCCT visualization module for support of vector image formats (PS, EPS, etc.) |
 | USE_TBB | Boolean flag | Indicates whether TBB 3rd party is used or not. TBB stands for Threading Building Blocks, the technology of Intel Corp, which comes with different mechanisms and patterns for injecting parallelism into your application. OCCT remains parallel even without TBB product |
 | USE_VTK | Boolean flag | Indicates whether VTK 3rd party is used or not. VTK stands for Visualization ToolKit, the technology of Kitware Inc intended for general-purpose scientific visualization. OCCT comes with a bridge between CAD data representation and VTK by means of its dedicated VIS component (VTK Integration Services). You may skip this 3rd party unless you are planning to use VTK visualization for OCCT geometry. See the official documentation @ref occt_user_guides__vis for the details on VIS |
 | 3RDPARTY_DIR | Path | Defines the root directory where all required 3rd party products will be searched. Once you define this path it is very convenient to click "Configure" button in order to let CMake automatically detect all necessary products|
 | 3RDPARTY_FREETYPE_* | Path | Path to Freetype binaries |
 | 3RDPARTY_TCL_* 3RDPARTY_TK_* | Path | Path to Tcl/Tk binaries |
 | 3RDPARTY_FREEIMAGE* | Path | Path to Freeimage binaries |
+| 3RDPARTY_GL2PS_* | Path | Path to GL2PS binaries |
 | 3RDPARTY_TBB* | Path | Path to TBB binaries |
 | 3RDPARTY_VTK_* | Path | Path to VTK binaries |
 | BUILD_MODULE_<MODULE>| Boolean flag | Indicates whether the corresponding OCCT module should be built or not. It should be noted that some toolkits of a module can be built even if this module is not checked (this happens if some other modules depend on these toolkits). The main modules and their descriptions can be found in @ref user_guides |
-| BUILD_LIBRARY_TYPE | String |  Specifies the type of library to be created. "Shared" libraries are linked dynamically and loaded at runtime. "Static" libraries are archives of object files used when linking other targets. Note that Draw Harness plugin system is incompatible with "Static" builds, and therefore it is disabled for these builds.|
+| BUILD_LIBRARY_TYPE | String |  Specifies the type of library to be created. "Shared" libraries are linked dynamically and loaded at runtime. "Static" libraries are archives of object files used when linking other targets |
 | BUILD_ADDITIONAL_TOOLKITS | String | Semicolon-separated individual toolkits to include into build process. If you want to build some particular libraries (toolkits) only, then you may uncheck all modules in the corresponding *BUILD_MODUE_\<MODULE\>* options and provide the list of necessary libraries here. Of course, all dependencies will be resolved automatically |
 | BUILD_YACCLEX | Boolean flag | Enables Flex/Bison lexical analyzers. OCCT source files relating to STEP reader and ExprIntrp functionality are generated automatically with Flex/Bison. Checking this option leads to automatic search of Flex/Bison binaries and regeneration of the mentioned files |
-| BUILD_SAMPLES_MFC | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
-| BUILD_SAMPLES_QT | Boolean flag | Indicates whether QT samples should be built together with OCCT. |
+| BUILD_MODULE_MfcSamples | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
 | BUILD_Inspector | Boolean flag | Indicates whether Inspector should be built together with OCCT. |
 | BUILD_DOC_Overview | Boolean flag | Indicates whether OCCT overview documentation project should be created together with OCCT. It is not built together with OCCT. Checking this option leads to automatic search of Doxygen binaries. Its building calls Doxygen command to generate the documentation in HTML format |
 | BUILD_PATCH | Path | Points to the directory recognized as a "patch" for OCCT. If specified, the files from this directory take precedence over the corresponding native OCCT sources. This way you are able to introduce patches to Open CASCADE Technology not affecting the original source distribution |
@@ -116,6 +116,7 @@ The following table gives the full list of environment variables used at the con
 | INSTALL_DIR_DOC | Path | Relative path to the documentation installation directory (absolute path is ${INSTALL_DIR}/${INSTALL_DIR_DOC}) |
 | INSTALL_FREETYPE | Boolean flag | Indicates whether Freetype binaries should be installed into the installation directory |
 | INSTALL_FREEIMAGE* | Boolean flag | Indicates whether Freeimage binaries should be installed into the installation directory |
+| INSTALL_GL2PS | Boolean flag | Indicates whether GL2PS binaries should be installed into the installation directory |
 | INSTALL_TBB | Boolean flag | Indicates whether TBB binaries should be installed into the installation directory |
 | INSTALL_VTK | Boolean flag | Indicates whether VTK binaries should be installed into the installation directory |
 | INSTALL_TCL | Boolean flag | Indicates whether TCL binaries should be installed into the installation directory |
--- a/dox/dev_guides/building/code_blocks.md
+++ b/dox/dev_guides/building/code_blocks.md
@@ -26,7 +26,7 @@ The environment is defined in the file *custom.sh* (on Linux and OS X) or *custo
  * "HardLink* - hard links to headers located in *src* will be created.
 * For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
 ~~~~~
-       export HAVE_FREEIMAGE=false
+       export HAVE_GL2PS=false
 ~~~~~

 Alternatively, or when *custom.sh* or *custom.bat* does not exist, you can launch **genconf** tool to configure environment interactively:
--- a/dox/dev_guides/building/msvc.md
+++ b/dox/dev_guides/building/msvc.md
@@ -18,7 +18,7 @@ If you have official distribution with project files included, you can use them

 Before building OCCT, make sure to have all the required third-party libraries installed.

-The easiest way to install third-party libraries is to download archive with pre-built binaries, corresponding to version of Visual Studio you are using, from https://www.opencascade.com/content/3rd-party-components.
+The easiest way to install third-party libraries is to download archive with pre-built binaries, corresponding to version of Visual Studio you are using, from http://www.opencascade.com/content/3rd-party-components.

 You can also build third-party libraries from their sources, see @ref occt_dev_guides__building_3rdparty_windows for instructions.

@@ -37,8 +37,6 @@ If you have Visual Studio projects already available (pre-installed or generated
 | vc14-uwp  | 2015 (14)             | UWP (Universal Windows Platform) | vc14-uwp |
 | vc141     | 2017 (15)             | Desktop (Windows API)            | vc14 |
 | vc141-uwp | 2017 (15)             | UWP (Universal Windows Platform) | vc14-uwp |
-| vc142     | 2019 (16)             | Desktop (Windows API)            | vc14 |
-| vc142-uwp | 2019 (16)             | UWP (Universal Windows Platform) | vc14-uwp |

 * *ARCH* -- architecture (32 or 64), affects only *PATH* variable for execution
 * <i>HAVE_*</i> -- flags to enable or disable use of optional third-party products
--- a/dox/dev_guides/building/xcode.md
+++ b/dox/dev_guides/building/xcode.md
@@ -27,7 +27,7 @@ The environment is defined in the file *custom.sh* which can be edited directly:
  * "HardLink* - hard links to headers located in *src* will be created.
 * For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
 ~~~~~
-       export HAVE_FREEIMAGE=false
+       export HAVE_GL2PS=false
 ~~~~~

 Alternatively, or when *custom.sh* does not exist, you can launch *genconf.sh* to configure environment interactively:
@@ -49,13 +49,6 @@ For instance, in Terminal application:
  $ ./genproj
 ~~~~~

-Option **-static** can be used with XCode to build static libraries.
-
-~~~~~
-  $ cd /dev/OCCT/opencascade-7.0.0
-  $ ./genproj xcd -static
-~~~~~
-
@section build_xcode_build Building

 To start **Xcode**, launch script *xcode.sh*.
@@ -82,7 +75,7 @@ To start *DRAWEXE*, which has been built with Xcode on Mac OS X, perform the fol

 3.Run the script
 ~~~~~
-   ./draw.sh xcd [d]
+   ./draw_cbp.sh xcd [d]
 ~~~~~

 Option *d* is used if OCCT has been built in **Debug** mode.
--- a/dox/dev_guides/contribution/coding_rules.md
+++ b/dox/dev_guides/contribution/coding_rules.md
@@ -76,28 +76,19 @@ Note that .lxx files should be avoided in most cases - inline method should be p

 Toolkit names are prefixed by *TK*, followed by a meaningful part of the name explaining the domain of functionality covered by the toolkit (e.g. *TKOpenGl*).

-### Names of public types
+### Names of classes

-Names of public classes and other types (structures, enums, typedefs) should match the common pattern: name of the package followed by underscore and suffix (the own name of the type):
+Usually the names of source files located in a unit start from the unit name separated from the other part of the file name by underscore "_".
+
+Thus, the names of files containing sources of C++ classes that belong to a package are constructed according to the following template:

 ~~~~~
-    <package-name>_<class-name>
+    <package-name>_<class-name>.cxx (or .hxx)
 ~~~~~

-Static methods related to the whole package are defined in the class with the same name as package (without suffix).
+For example, file *Adaptor2d_Curve2d.cxx* belongs to the package *Adaptor2d*

-Each type should be defined in its own header file with the name of the type and extension ".hxx".
-Implementation should be placed in the file with the same name and extension ".cxx"; for large classes it is possible to split implementation into multiple source files with additional suffixes in the names (usually numerical, e.g. *BSplCLib_1.cxx*).
-
-For example, class *Adaptor2d_Curve2d* belongs to the package *Adaptor2d*; it is defined in header file *Adaptor2d_Curve2d.hxx* and implemented in source file *Adaptor2d_Curve2d.cxx*.
-
-This rule also applies to complex types constructed by instantiation of templates.
-Such types should be given own names using *typedef* statement, located in same-named header file.
-
-For example, see definition in the file *TColStd_IndexedDataMapOfStringString.hxx*:
-~~~~~
-typedef NCollection_IndexedDataMap<TCollection_AsciiString,TCollection_AsciiString,TCollection_AsciiString> TColStd_IndexedDataMapOfStringString;
-~~~~~
+Files that contain sources related to the whole unit are called by the unit name with appropriate extension.

 ### Names of functions

@@ -488,8 +479,6 @@ Inclusion of class header on top verifies consistency of the header (e.g. that h

 An exception to the rule is ordering system headers generating a macros declaration conflicts (like "windows.h" or "X11/Xlib.h") - these headers should be placed in the way solving the conflict.

-The source or header file should include only minimal set of headers necessary for compilation, without duplicates (considering nested includes).
-
 ~~~~~{.cpp}
 // the header file of implemented class
 #include <PackageName_ClassName.hxx>
--- a/dox/dev_guides/contribution_workflow/contribution_workflow.md
+++ b/dox/dev_guides/contribution_workflow/contribution_workflow.md
@@ -10,7 +10,7 @@ The purpose of this document is to describe standard workflow for processing con

 Each contribution should have corresponding issue (bug, or feature, or integration request) 
 registered in the MantisBT issue tracker system accessible by URL 
-https://tracker.dev.opencascade.org.
+http://tracker.dev.opencascade.org. 
 The issue is processed according to the described workflow.

@subsection occt_contribution_intro_access Access levels
--- a/dox/dev_guides/debug/debug.md
+++ b/dox/dev_guides/debug/debug.md
@@ -136,69 +136,11 @@ const char* GeomTools_Dump (void* theHandlePtr)
 Dump geometric object to cout.
 - *theHandlePtr* -- a pointer to the geometric variable (<i>Handle</i> to *Geom_Geometry* or *Geom2d_Curve* or descendant) to be set.

-
-@section occt_debug_dump_json Dump OCCT objects into Json
-
-Many OCCT classes may dump the current state into the stream. This stream contains the information about the class field into the field value/s.
-It is possible to prepare recursive dump using corresponded macro for class fields. The depth of this recursion is defined by parameter of the dump.
-The object defines What parameters should be presented in the Dump. The usual way is to dump all object fields.
-
-@subsection occt_debug_dump_json_object Implementation in object
-
-Steps to prepare dump of the object into json:
-
-1. Create method <b>DumpJson</b>. The method should accept the output stream and the depth for the fields dump.
-Depth, equal to zero means that only fields of this class should be dumped. Default value -1 means that whole tree of dump will be built recursively calling dump of all fields.
-
-2. Put into the first row of the method <b>OCCT_DUMP_CLASS_BEGIN</b>. This macro creates a local variable, that will open Json structure on start, and close on exit from this method.
-
-3. Add several macro to store field values.
-
-The following macro are defined to cover the object parameters into json format:
-
-| Name                        | Result in json |
-| :-------------------------- | :--------|
-| OCCT_DUMP_FIELD_VALUE_NUMERICAL  | "field": value |
-| OCCT_DUMP_FIELD_VALUE_STRING     | "field": "value" |
-| OCCT_DUMP_FIELD_VALUE_POINTER    | "field": "pointer address" |
-| OCCT_DUMP_FIELD_VALUES_DUMPED    | "field": { result of field->DumpJson(...) } |
-| OCCT_DUMP_FIELD_VALUES_NUMERICAL | "field": [value_1, ..., value_n]
-| OCCT_DUMP_FIELD_VALUES_STRING    | "field": ["value_1", ..., "value_n"]
-| OCCT_DUMP_BASE_CLASS   | "kind": { result of kind::DumpJson(...) } |
-
-@subsection occt_debug_dump_json_draw Using in DRAW
-
-In DRAW, key '-dumpJson' is used to dump an object.
-It is implemented in 'vaspect' and 'boundingbox' commands.
-
-Json output for Bnd_OBB (using command 'bounding v -obb -dumpJson'):
-
-~~~~~
-"Bnd_OBB": {
-   "Center": {
-      "gp_XYZ": [1, 2, 3]
-   },
-   "Axes[0]": {
-       "gp_XYZ:" [1, 0, 0]
-   },
-   "Axes[1]": {
-       "gp_XYZ:" [0, 1, 0]
-   },
-   "Axes[2]": {
-       "gp_XYZ:" [0, 0, 1]
-   },
-   "HDims[0]": 0,
-   "HDims[1]": 0,
-   "HDims[2]": 0,
-   "IsAABox": 1,
-}
-~~~~~
-
@section occt_debug_vstudio Using Visual Studio debugger 

@subsection occt_debug_vstudio_command Command window 

-Visual Studio debugger provides the Command Window (can be activated from menu <b>View / Other Windows / Command Window</b>), which can be used to evaluate variables and expressions interactively in a debug session (see https://msdn.microsoft.com/en-us/library/c785s0kz.aspx). Note that the Immediate Window can also be used but it has some limitations, e.g. does not support aliases.
+Visual Studio debugger provides the Command Window (can be activated from menu <b>View / Other Windows / Command Window</b>), which can be used to evaluate variables and expressions interactively in a debug session (see http://msdn.microsoft.com/en-us/library/c785s0kz.aspx). Note that the Immediate Window can also be used but it has some limitations, e.g. does not support aliases.

 When the execution is interrupted by a breakpoint, you can use this window to call the above described functions in context of the currently debugged function. Note that in most cases you will need to specify explicitly context of the function by indicating the name of the DLL where it is defined.

--- a/dox/dev_guides/documentation/documentation.md
+++ b/dox/dev_guides/documentation/documentation.md
@@ -12,15 +12,15 @@ This document provides practical guidelines for generation and editing of OCCT u
 You need to have the following software installed to generate the documentation.

 **Tcl/Tk**
-Version 8.5 or 8.6: https://www.tcl.tk/software/tcltk/download.html
+Version 8.5 or 8.6: http://www.tcl.tk/software/tcltk/download.html

 **Doxygen**
-Version 1.8.4 or above: http://www.doxygen.nl/download.html
+Version 1.8.4 or above: http://www.stack.nl/~dimitri/doxygen/download.html

 **Dot**
-Part of Graphviz software, used by Doxygen for generation of class diagrams in Reference Manual: https://www.graphviz.org/download/
+Part of Graphviz software, used by Doxygen for generation of class diagrams in Reference Manual: http://www.graphviz.org/Download..php

-**MiKTeX** or other package providing **pdflatex** command (only needed for generation of PDF documents): https://miktex.org/download
+**MiKTeX** or other package providing **pdflatex** command (only needed for generation of PDF documents): http://miktex.org/download

 **Inkscape** (only needed for generation of PDF documents containing SVG images): http://www.inkscape.org/download

@@ -134,7 +134,7 @@ Add a relative path to *svn.md* in file <i>dox/FILES.txt</i>. For instance
 dev_guides/svn/svn.md
@endverbatim

-**Note** that the order of paths to documents in *FILES.txt* is reproduced in the Table of Contents in the HTML output, thus they need to be placed logically.
+**Note** that the order of paths to documents in *FILES.txt* is reproduced in the Table of Contents in the HTML output. Please, place them logically.

 **Note** that you should specify a file tag, not the document name. See @ref OCCT_DM_SECTION_A_1 "Header and hierarchic document structure" section for details.

@@ -180,7 +180,7 @@ For example:
  @subsubsection occt_ocaf_1_1_1 The document and the data framework
@endverbatim

-**Note** that section names can be used for references within the document and in other documents, so it is necessary to use the common prefix indicative of the document name for all section names in the given document. 
+Please, note that section names can be used for references within the document and in other documents, so it is necessary to use the common prefix indicative of the document name for all section names in the given document. 
 For example,  *occt_ocaf* for sections in Open CASCADE Application Framework manual.

 The remaining part of section names in most documents consists only of numbers, for example *1_1*. Actually, the hierarchical structure of the output table of contents is not based on these numbers and is generated automatically. 
--- a/dox/dev_guides/git_guide/git_guide.md
+++ b/dox/dev_guides/git_guide/git_guide.md
@@ -11,17 +11,18 @@ Guide to installing and using Git for OCCT development {#occt_dev_guides__git_gu
  to OCCT developers who are not familiar with this tool 
  and to facilitate the use of the official OCCT Git repository for code contribution to OCCT.

-  It can be useful to learn more about Git concepts and tools from a book a or manual. 
-  Many good books on Git can be found at https://git-scm.com/documentation
+  Reading this document does not exempt from the need to learn Git concepts and tools. 
+  Please consult a book or manual describing Git to get acquainted with this tool. 
+  Many good books on Git can be found at http://git-scm.com/documentation 
  
  For the experienced Git users it can be enough to read sections 1 and 3
   of this document to start working with the repository.
   
-  Familiarize yourselves with the @ref occt_dev_guides__contribution_workflow "Contribution Workflow document"  
+  Please make sure to get familiar with the Contribution Workflow document 
  that describes how Git is used for processing contributions to OCCT.
  
  This and related documents are available at the Resources page 
-  of the OCCT development portal at https://dev.opencascade.org/index.php?q=home/resources.
+  of the OCCT development portal at http://dev.opencascade.org/index.php?q=home/resources. 

@subsection occt_gitguide_1_2 Git URL

@@ -82,7 +83,7 @@ The official repository contains:
@subsection occt_gitguide_1_5 Version of Git

  The repository is tested to work with Git 1.7.6 and above. 
-  Avoid using versions below 1.7.1 as they are known to cause troubles.
+  Please do not use versions below 1.7.1 as they are known to cause troubles.

@section occt_gitguide_2 Installing Tools for Work with Git

@@ -113,7 +114,7 @@ The official repository contains:

@subsubsection occt_gitguide_2_1_2 Installation and configuration of TortoiseGit

-  Download TortoiseGit distributive from https://tortoisegit.org/download/.
+  Download TortoiseGit distributive from http://code.google.com/p/tortoisegit/downloads/list. 
  Launch the installation.

 * Select your SSH client. Choose option 
@@ -139,7 +140,7 @@ The official repository contains:
  @figure{OCCT_GitGuide_V2_image006.png,"",320}

  Optionally, you can set up TortoiseGit to use visual diff utility for SVG images used in OCCT documentation.
-  For that, click on item "Diff Viewer" in the Settings dialog, then click button "Advanced..." in the right tab to add a new record with the following parameters:
+  For that, click on item "Diff Viewer" in the Settings dialog, then click button "Advanced..." on the right tab add new record with the following parameters:
  - Extension: <code>.svg</code>
  - External program: <code>&lt;path_to_OCCT&gt;\\adm\\svgdiff.bat %%base %%mine %%bname %%yname</code>

@@ -238,7 +239,7 @@ The official repository contains:

@subsection occt_gitguide_3_3 Adding public key in your account

-Log in on the portal https://dev.opencascade.org and click on **My account** link to the right. If you have a Contributor status, you will see **SSH keys** tab to the right.
+Log in on the portal http://dev.opencascade.org and click on **My account** link to the right. If you have a Contributor status, you will see **SSH keys** tab to the right. 

 Click on that tab, then click **Add a public key**, and paste the text of the public key (see above sections on how to generate the key) into the text box. 

@@ -249,7 +250,7 @@ Click **Save** to input the key to the system.
  It is typical to use your e-mail address or workstation name for this field; no restrictions are set by the portal.


-  **Note** that some time (5-10 min) is needed for the system 
+  Please note that some time (5-10 min) is needed for the system 
  to update the configuration after the new key is added. 
  After that time, you can try accessing Git.

@@ -496,7 +497,7 @@ To rebase your branch into a single commit, you need to do the following:

  The changes made in the branch can be reviewed without direct access to Git, using GitWeb interface:

-  * Open GitWeb in your web browser: https://git.dev.opencascade.org/gitweb/?p=occt.git
+  * Open GitWeb in your web browser: http://git.dev.opencascade.org/gitweb/?p=occt.git 
  * Locate the branch you want to review among **heads** (click ‘…’ at the bottom of the page to see the full list).
  * Click **log** (or **shortlog**) to see the history of the branch. 
    
--- a/dox/dev_guides/tests/tests.md
+++ b/dox/dev_guides/tests/tests.md
@@ -193,9 +193,9 @@ Use prefix <i>bug</i> followed by Mantis issue ID and, if necessary, additional
 	*	To check expected output which should be obtained as the test result, add @ref testmanual_3_7 "REQUIRED" statement for each line of output to mark it as required.
 	*	If the test case produces error messages (contained in parse.rules), which are expected in that test and should not be considered as its failure (e.g. test for *checkshape* command), add REQUIRED statement for each error to mark it as required output.
 4.	To check whether the data files needed for the test are already present in the database, use DRAW command *testfile* (see below).
-    If the data file is already present, use it for a new test instead of adding a duplicate.
-    If the data file(s) are not yet present in the test database, put them to a folder and add it to the environment variable *CSF_TestDataPath* to be found by the test system.
-    The location of the data files, which need to be accessed by OCC team and put to the official database, should be provided in the comment to Mantis issue, clearly indicating how the names of the files used by the test script match the actual names of the files.
+    If the data file is already present, use it for new test instead of adding a duplicate.
+    If the data file(s) are not yet present in the test database, put them to some folder and add it to the environment variable *CSF_TestDataPath* to be found by the test system.
+    Information on where the data files can be accessed by OCC team for putting to official database should be provided in comment to Mantis issue, clearly indicating how names of the files used by the test script match the actual names of the files.
    The simplest way is to attach the data files to the Mantis issue, with the same names as used by the test script.
 5.	Check that the test case runs as expected (test for fix: OK with the fix, FAILED without the fix; test for existing problem: BAD), and integrate it to the Git branch created for the issue.

@@ -222,8 +222,8 @@ fixshape result a 0.01 0.01
 checkshape result
 ~~~~~

-DRAW command *testfile* should be used to check the data files used by the test for possible duplication of content or names.
-The command accepts the list of paths to files to be checked (as a single argument) and gives a conclusion on each of the files, for instance:
+DRAW command testfile should be used to check the data files being used by the test for possible duplication of content or names.
+The command accepts list of paths to files being checked as single argument, and will give conclusion on each of the files, for instance:

 ~~~~~
 Draw[1]> testfile [glob /my/data/path/bug12345*]
@@ -347,7 +347,7 @@ The test group may contain *parse.rules* file. This file defines patterns used f

 Each line in the file should specify a status (single word), followed by a regular expression delimited by slashes (*/*) that will be matched against lines in the test output log to check if it corresponds to this status.

-The regular expressions should follow <a href="https://www.tcl.tk/man/tcl/TclCmd/re_syntax.htm">Tcl syntax</a>, with a special exception that "\b" is considered as word limit (Perl-style), in addition to "\y" used in Tcl.
+The regular expressions should follow <a href="http://www.tcl.tk/man/tcl/TclCmd/re_syntax.htm">Tcl syntax</a>, with a special exception that "\b" is considered as word limit (Perl-style), in addition to "\y" used in Tcl.

 The rest of the line can contain a comment message, which will be added to the test report when this status is detected.

@@ -622,7 +622,7 @@ The new test created for an unsolved problem should return BAD. The new test cre

@subsection testmanual_3_6 Marking BAD cases

-If the test produces an invalid result at a certain moment then the corresponding bug should be created in the OCCT issue tracker located at https://tracker.dev.opencascade.org, and the problem should be marked as TODO in the test script.
+If the test produces an invalid result at a certain moment then the corresponding bug should be created in the OCCT issue tracker located at http://tracker.dev.opencascade.org, and the problem should be marked as TODO in the test script.

 The following statement should be added to such a test script:
 ~~~~~
@@ -878,18 +878,7 @@ The test grid name is constructed depending on the type of the tested chamfers.
 | dist_angle_complex	| |	Distance from edge and given angle |
 | dist_angle_sequence	| |	Distance from edge and given angle |

-@subsubsection testmanual_5_1_7 de
-
-This group tests reading and writing of CAD data files (iges, step) to and from OCCT.
-
-Test cases check transfer status, shape and attributes against expected reference values.
-
-| Grid	| Commands | Functionality |
-| :---- | :----- | :------- | 
-| iges_1, iges_2, iges_3 | igesbrep, brepiges, ReadIges, WriteIges | IGES tests | 
-| step_1, step_2, step_3, step_4, step_5 | stepread, stepwrite, ReadStep, WriteStep | STEP tests |
-
-@subsubsection testmanual_5_1_8 demo
+@subsubsection testmanual_5_1_7 demo

 This group allows demonstrating how testing cases are created, and testing DRAW commands and the test system as a whole.

@@ -900,7 +889,7 @@ This group allows demonstrating how testing cases are created, and testing DRAW
 | samples	| |	OCCT samples | 


-@subsubsection testmanual_5_1_9 draft
+@subsubsection testmanual_5_1_8 draft

 This group allows testing draft operations.

@@ -911,7 +900,7 @@ DRAW module: MODELING.
 | Angle	| depouille	| Drafts with angle (inclined walls) |


-@subsubsection testmanual_5_1_10 feat
+@subsubsection testmanual_5_1_9 feat

 This group allows testing creation of features on a shape.

@@ -925,7 +914,7 @@ DRAW module: MODELING (package *BRepTest*).
 | featrevol		| | | 
 | featrf		| | |

-@subsubsection testmanual_5_1_11 heal
+@subsubsection testmanual_5_1_10 heal

 This group allows testing the functionality provided by *ShapeHealing* toolkit.

@@ -954,7 +943,7 @@ DRAW module: XSDRAW
 | surface_to_revolution_standard |	DT_ShapeConvertRev	| Convert elementary surfaces to revolutions, simple cases |
 | update_tolerance_locked	| updatetolerance	| Update the tolerance of shape so that it satisfy the rule: toler(face)<=toler(edge)<=toler(vertex) |

-@subsubsection testmanual_5_1_12 mesh
+@subsubsection testmanual_5_1_11 mesh

 This group allows testing shape tessellation (*BRepMesh*) and shading.

@@ -971,7 +960,7 @@ DRAW modules: MODELING (package *MeshTest*), VISUALIZATION (package *ViewerTest*
 | advanced_incmesh_parallel | incmesh | Meshing of complex shapes, parallel mode |
 | standard_incmesh_parallel | incmesh | Meshing of simple shapes, parallel mode |

-@subsubsection testmanual_5_1_13 mkface
+@subsubsection testmanual_5_1_12 mkface

 This group allows testing creation of simple surfaces.

@@ -986,7 +975,7 @@ DRAW module: MODELING (package *BRepTest*)
 | after_revsurf_and_offset | mkface	| | 
 | mkplane | mkplane	| |

-@subsubsection testmanual_5_1_14 nproject
+@subsubsection testmanual_5_1_13 nproject

 This group allows testing normal projection of edges and wires onto a face.

@@ -996,7 +985,7 @@ DRAW module: MODELING (package *BRepTest*)
 | :---- | :----- | :------- | 
 | Base	| nproject	|  |

-@subsubsection testmanual_5_1_15 offset
+@subsubsection testmanual_5_1_14 offset

 This group allows testing offset functionality for curves and surfaces.

@@ -1012,7 +1001,7 @@ DRAW module: MODELING (package *BRepTest*)
 | shape	 | offsetshape	| |
 | wire_closed_outside_0_005, wire_closed_outside_0_025, wire_closed_outside_0_075, wire_closed_inside_0_005, wire_closed_inside_0_025, wire_closed_inside_0_075, wire_unclosed_outside_0_005, wire_unclosed_outside_0_025, wire_unclosed_outside_0_075	|	mkoffset | 2d offset of closed and unclosed planar wires with different offset step and directions of offset ( inside / outside ) |
 	
-@subsubsection testmanual_5_1_16 pipe
+@subsubsection testmanual_5_1_15 pipe

 This group allows testing construction of pipes (sweeping of a contour along profile).

@@ -1022,7 +1011,7 @@ DRAW module: MODELING (package *BRepTest*)
 | :---- | :----- | :------- | 
 | Standard	| pipe	| |

-@subsubsection testmanual_5_1_17 prism
+@subsubsection testmanual_5_1_16 prism

 This group allows testing construction of prisms.

@@ -1032,7 +1021,7 @@ DRAW module: MODELING (package *BRepTest*)
 | :---- | :----- | :------- | 
 | seminf | prism	| |

-@subsubsection testmanual_5_1_18 sewing
+@subsubsection testmanual_5_1_17 sewing

 This group allows testing sewing of faces by connecting edges.

@@ -1044,7 +1033,7 @@ DRAW module: MODELING (package *BRepTest*)
 | tol_1	| sewing | Sewing faces with tolerance 1 |
 | tol_100 | sewing | Sewing faces with tolerance 100 | 

-@subsubsection testmanual_5_1_19 thrusection
+@subsubsection testmanual_5_1_18 thrusection

 This group allows testing construction of shell or a solid passing through a set of sections in a given sequence (loft).

@@ -1053,7 +1042,7 @@ This group allows testing construction of shell or a solid passing through a set
 | solids	| thrusection | Lofting with resulting solid | 
 | not_solids | thrusection	| Lofting with resulting shell or face | 

-@subsubsection testmanual_5_1_20 xcaf
+@subsubsection testmanual_5_1_19 xcaf

 This group allows  testing extended data exchange packages.

--- a/dox/dev_guides/upgrade/upgrade.md
+++ b/dox/dev_guides/upgrade/upgrade.md
@@ -51,7 +51,7 @@ for (Standard_Integer aGr = 1; aGr <= aLen; ++aGr)

 * All occurrences of *Select3D_Projector* in the application code (if any) should be replaced with *Handle(Select3D_Projector)*.
 * The code of inheritors of *Select3D_SensitiveEntity* should be updated if they override <i>Matches()</i> (this is probable, if clipping planes are used).
-* Constructor for *V3d_Plane* has been changed, so the extra argument should be removed if used in the application. It is necessary to add a new plane using method *V3d_Viewer::AddPlane()* if *V3d_Viewer* has been used to manage clipping planes list (this does not affect clipping planes representation). Have a look at the source code for new DRAWEXE *vclipplane* command in *ViewerTest_ObjectsCommands.cxx, VClipPlane* to see how clipping planes can be managed in the application.
+* Constructor for *V3d_Plane* has been changed, so the extra argument should be removed if used in the application. It is necessary to add a new plane using method *V3d_Viewer::AddPlane()* if *V3d_Viewer* has been used to manage clipping planes list (this does not affect clipping planes representation). Please, have a look at the source code for new DRAWEXE *vclipplane* command in *ViewerTest_ObjectsCommands.cxx, VClipPlane* to see how clipping planes can be managed in the application.

@section upgrade_652 Upgrade to OCCT 6.5.2

@@ -112,14 +112,14 @@ Porting of user applications from an earlier OCCT version to version 6.6.0 requi
 It is necessary to introduce the corresponding changes in the applications for which the order of sub-shapes resulting from a Boolean operation is important. It is strongly recommended to use identification methods not relying on the order of sub-shapes (e.g. OCAF naming).
 * If you need to use OCCT on Mac OS X with X11 (without Cocoa), build OCCT with defined pre-processor macro *CSF_MAC_USE_GLX11*. XLib front-end (previously the only way for unofficial OCCT builds on Mac OS X) is now disabled by default on this platform. If your application has no support for Cocoa framework you may build OCCT with XLib front-end adding *MACOSX_USE_GLX* macro to compiler options (you may check the appropriate option in WOK configuration GUI and in CMake configuration). Notice that XQuartz (XLib implementation for Mac OS X) now is an optional component and does not provide a sufficient level of integrity with native (Cocoa-based) applications in the system. It is not possible to build OCCT with both XLib and Cocoa at the same time due to symbols conflict in OpenGL functions. 
 * Animation mode and degeneration presentation mode (simplified presentation for animation) and associated methods have been removed from 3D viewer functionality.
-Correspondingly, the code using methods *SetAnimationModeOn(), SetAnimationModeOff(), AnimationModeIsOn(), AnimationMode(), Tumble(), SetDegenerateModeOn(), SetDegenerateModeOff()* and *DegenerateModeIsOn()* of classes *V3d_View* and *Visual3d_View* will need to be removed or redesigned. Hidden Line Removal presentation was not affected; however, the old code that used methods *V3d_View::SetDegenerateModeOn* or *V3d_View::SetDegenerateModeOff* to control HLR presentation should be updated to use *V3d_View::SetComputedMode* method instead.
+Correspondingly, the code using methods *SetAnimationModeOn(), SetAnimationModeOff(), AnimationModeIsOn(), AnimationMode(), Tumble(), SetDegenerateModeOn(), SetDegenerateModeOff()* and *DegenerateModeIsOn()* of classes *V3d_View* and *Visual3d_View* will need to be removed or redesigned. Please, notice that Hidden Line Removal presentation was not affected; however, the old code that used methods *V3d_View::SetDegenerateModeOn* or *V3d_View::SetDegenerateModeOff* to control HLR presentation should be updated to use *V3d_View::SetComputedMode* method instead.
 * Calls of *Graphic3d_Group::BeginPrimitives()* and *Graphic3d_Group::EndPrimitives()* should be removed from the application code.
 * Application functionality for drawing 2D graphics that was formerly based on *TKV2d* API should be migrated to *TKV3d* API. The following changes are recommended for this migration:
   * A 2D view can be implemented as a *V3d_View* instance belonging to *V3d_Viewer* managed by *AIS_InteractiveContext* instance. To turn *V3d_View* into a 2D view, the necessary view orientation should be set up at the view initialization stage using *V3d_View::SetProj()* method, and view rotation methods simply should not be called.
   * Any 2D graphic entity (formerly represented with *AIS2D_InteractiveObject*) should become a class derived from *AIS_InteractiveObject* base. These entities should be manipulated in a view using *AIS_InteractiveContext* class API.
   * All drawing code should be put into *Compute()* virtual method of a custom interactive object class and use API of *Graphic3d* package. In particular, all geometry should be drawn using class hierarchy derived from *Graphic3d_ArrayOfPrimitives*. Normally, the Z coordinate for 2D geometry should be constant, unless the application implements some advanced 2D drawing techniques like e.g. multiple "Z layers" of drawings.
   * Interactive selection of 2D presentations should be set up inside *ComputeSelection()* virtual method of a custom interactive object class, using standard sensitive entities from *Select3D* package and standard or custom entity owners derived from *SelectMgr_EntityOwner* base.
-Refer to the Visualization User's Guide for further details concerning OCCT 3D visualization and selection classes. See also *Viewer2D* OCCT sample application, which shows how 2D drawing can be implemented using TKV3d API.
+Please refer to the Visualization User's Guide for further details concerning OCCT 3D visualization and selection classes. See also *Viewer2D* OCCT sample application, which shows how 2D drawing can be implemented using TKV3d API.
 * Run-time graphic driver library loading mechanism based on *CSF_GraphicShr* environment variable usage has been replaced by explicit linking against *TKOpenGl* library. The code sample below shows how the graphic driver should be created and initialized in the application code: 
 ~~~~
 // initialize a new viewer with OpenGl graphic driver
@@ -161,10 +161,10 @@ Porting of user applications from an earlier OCCT version to version 6.7.0 requi

@subsection upgrade_670_clipping Object-level clipping and capping algorithm. 

-* It might be necessary to revise and port code related to management of view-level clipping to use *Graphic3d_ClipPlane* instead of *V3d_Plane* instances. Note that *V3d_Plane* class has been preserved -- as previously, it can be used as plane representation. Another approach to represent *Graphic3d_ClipPlane* in a view is to use custom presentable object.
-* The list of arguments of *Select3D_SensitiveEntity::Matches()* method for picking detection has changed. Since now, for correct selection clipping, the implementations should perform a depth clipping check and return (as output argument) minimum depth value found at the detected part of sensitive. Refer to CDL / Doxygen documentation to find descriptive hints and snippets.
+* It might be necessary to revise and port code related to management of view-level clipping to use *Graphic3d_ClipPlane* instead of *V3d_Plane* instances. Please note that *V3d_Plane* class has been preserved -- as previously, it can be used as plane representation. Another approach to represent *Graphic3d_ClipPlane* in a view is to use custom presentable object.
+* The list of arguments of *Select3D_SensitiveEntity::Matches()* method for picking detection has changed. Since now, for correct selection clipping, the implementations should perform a depth clipping check and return (as output argument) minimum depth value found at the detected part of sensitive. Please refer to CDL / Doxygen documentation to find descriptive hints and snippets.
 * *Select3D_SensitiveEntity::ComputeDepth()* abstract method has been removed. Custom implementations should provide depth checks by method *Matches()* instead -- all data required for it is available within a scope of single method.
-* It might be necessary to revise the code of custom sensitive entities and port *Matches()* and *ComputeDepth()* methods to ensure proper selection clipping. Note that obsolete signature of *Matches* is not used anymore by the selector. If your class inheriting *Select3D_SensitiveEntity* redefines the method with old signature the code should not compile as the return type has been changed. This is done to prevent override of removed methods.
+* It might be necessary to revise the code of custom sensitive entities and port *Matches()* and *ComputeDepth()* methods to ensure proper selection clipping. Please note that obsolete signature of *Matches* is not used anymore by the selector. If your class inheriting *Select3D_SensitiveEntity* redefines the method with old signature the code should not compile as the return type has been changed. This is done to prevent override of removed methods.

@subsection upgrade_670_markers Redesign of markers presentation

@@ -210,7 +210,7 @@ If *ViewMapping* and *ViewOrientation* were used directly, this functionality ha

 The current perspective model is not fully backward compatible, so the old perspective-related functionality needs to be reviewed.

-Revise application-specific custom presentations to provide a proper bounding box, otherwise the object might become erroneously clipped by automatic *ZFit* or frustum culling algorithms enabled by default.
+Please revise application-specific custom presentations to provide proper bounding box. Otherwise object might become erroneously clipped by automatic *ZFit* or frustum culling algorithms enabled by default.

@subsection upgrade_680_connected_objects Redesign of Connected Interactive Objects

@@ -439,7 +439,7 @@ class TColStd_Array1OfReal; -> #include <TColStd_Array1OfReal.hxx>
 ~~~~~
 Handle_Class -> Handle(Class)
 ~~~~~
-  This change is not applied if the source or header file is recognized as containing the definition of Qt class with signals or slots, to avoid possible compilation errors of MOC files caused by inability of MOC to recognize macros (see https://doc.qt.io/qt-4.8/signalsandslots.html).
+  This change is not applied if the source or header file is recognized as containing the definition of Qt class with signals or slots, to avoid possible compilation errors of MOC files caused by inability of MOC to recognize macros (see http://doc.qt.io/qt-4.8/signalsandslots.html).
  The file is considered as defining a Qt object if it contains strings *Q_OBJECT* and either *slots:* or *signals:*. 

 4. Removes forward declarations of classes with names <i>Handle(C)</i> or *Handle_C*, replacing them either by forward declaration of its argument class, or (for files defining Qt objects) <i>\#include</i> statement for a header with the name of the argument class and extension .hxx:
@@ -736,9 +736,9 @@ If you like to preserve the compatibility of your application code with OCCT ver
 If your application is essentially based on CDL, and you need to upgrade it to OCCT 7.0, you will very likely need to convert your application code to non-CDL form.
 This is a non-trivial effort; the required actions would depend strongly on the structure of the code and used CDL features.

-The upgrade script and sources of a specialized WOK version used for OCCT code upgrade can be found in WOK Git repository in branch [CR0_700_2](https://git.dev.opencascade.org/gitweb/?p=occt-wok.git;a=log;h=refs/heads/CR0_700_2).
+The upgrade script and sources of a specialized WOK version used for OCCT code upgrade can be found in WOK Git repository in branch [CR0_700_2](http://git.dev.opencascade.org/gitweb/?p=occt-wok.git;a=log;h=refs/heads/CR0_700_2).

-[Contact us](https://www.opencascade.com/contact/) if you need more help.
+[Contact us](http://www.opencascade.com/contact/) if you need more help.

@subsection upgrade_occt700_bspline Separation of BSpline cache

@@ -791,7 +791,6 @@ std::stable_sort (aValues.begin(), aValues.end());

 The old mechanism for rendering Underlay and Overlay on-screen 2D objects based on *Visual3d_Layer* and immediate drawing model (uncached and thus slow) has been removed.
 Classes *Aspect_Clayer2d, OpenGl_GraphicDriver_Layer, Visual3d_Layer, Visual3d_LayerItem, V3d_LayerMgr* and *V3d_LayerMgrPointer* have been deleted.
-The following auxiliary definition have been removed as well: Aspect_TypeOfPrimitive, Aspect_TypeOfLayer, Aspect_TypeOfEdge, Aspect_TypeOfDrawMode, Aspect_TypeOfConstraint, Aspect_DriverDefinitionError, Aspect_BadAccess.

 General AIS interactive objects with transformation persistence flag *Graphic3d_TMF_2d* can be used as a replacement of *Visual3d_LayerItem*.
 The anchor point specified for transformation persistence defines the window corner of  (or center in case of (0, 0) point).
@@ -987,11 +986,11 @@ The applications that use *gp_Quaternion* to convert Yaw-Pitch-Roll angles (or o

@subsection upgrade_zoom_persistent_selection Zoom Persistent Selection

-Zoom persistent selection introduces a new structure *Graphic3d_TransformPers* to transform persistence methods and parameters and a new class *Graphic3d_WorldViewProjState* to refer to the camera transformation state. You might need to update your code to deal with the new classes if you were using the related features. Keep in mind the following: 
+Zoom persistent selection introduces a new structure *Graphic3d_TransformPers* to transform persistence methods and parameters and a new class *Graphic3d_WorldViewProjState* to refer to the camera transformation state. You might need to update your code to deal with the new classes if you were using the related features. Please, keep in mind the following: 
 * *Graphic3d_Camera::ModelViewState* has been renamed to *Graphic3d_Camera::WorldViewState*.
 * Transformation matrix utilities from *OpenGl_Utils* namespace have been moved to *Graphic3d_TransformUtils* and *Graphic3d_TransformUtils.hxx* header respectively.
 * Matrix stack utilities from *OpenGl_Utils* namespace have been moved to *OpenGl_MatrixStack* class and *OpenGl_MatrixStack.hxx* header respectively.
-* *OpenGl_View* methods *Begin/EndTransformPersistence* have been removed. Use *Graphic3d_TransformPers::Apply()* instead to apply persistence to perspective and world-view projection matrices.
+* *OpenGl_View* methods *Begin/EndTransformPersistence* have been removed. Please, use *Graphic3d_TransformPers::Apply()* instead to apply persistence to perspective and world-view projection matrices.

@subsection upgrade_occt700_correction_of_texture Texture mapping of objects

@@ -1091,7 +1090,7 @@ The following environment variables have become redundant:

 * *CSF_UnitsLexicon* and *CSF_UnitsDefinition* are no more used.  Units definition (*UnitsAPI/Lexi_Expr.dat* and *UnitsAPI/Units.dat*) is now embedded into source code.
 * *CSF_XSMessage* and *CSF_XHMessage* are now optional.
-  English messages (XSMessage/\*XSTEP.us* and SHMessage/\*SHAPE.us*) are now embedded into source code
+  English messages (XSMessage/*XSTEP.us* and SHMessage/*SHAPE.us*) are now embedded into source code
  and automatically loaded when environment variables are not set.
 * *CSF_ShadersDirectory* is not required any more, though it still can be used to load custom shaders.
  Mandatory GLSL resources are now embedded into source code.
@@ -1124,7 +1123,7 @@ The following classes have been changed:
 * *BRepTools_Modifier* class now has two modes of work. They are defined by the boolean parameter *MutableInput*, which is turned off by default. This means that the algorithm always makes a copy of a sub-shape (e.g. vertex) if its tolerance is to be increased in the output shape. The old mode corresponds to *MutableInput* turned on. This change may impact an application if it implements a class derived from *BRepTools_Modifier*.
 * The second parameter *theIsOuterWire* of method *ShapeAnalysis_Wire::CheckSmallArea* has been removed.
 * In class *GeomPlate_CurveConstraint*, two constructors taking boundary curves of different types have been replaced with one constructor taking the curve of an abstract type.
-* The last optional argument *RemoveInvalidFaces* has been removed from the constructor of class  *BRepOffset_MakeOffset* and method *Initialize*.
+*  The last optional argument *RemoveInvalidFaces* has been removed from the constructor of class  *BRepOffset_MakeOffset* and method *Initialize*.
 * The public method *BOPDS_DS::VerticesOnIn* has been renamed into *SubShapesOnIn* and the new output parameter *theCommonPB* has been added.

@section upgrade_occt720 Upgrade to OCCT 7.2.0
@@ -1438,422 +1437,3 @@ The Error/Warning reporting system of the algorithms in Boolean Component (in al
 The methods returning the status of errors and warnings of the algorithms (ErrorStatus() and WarningStatus()) have been removed.
 Instead use methods HasErrors() and HasWarnings() to check for presence of errors and warnings, respectively.
 The full list of errors and warnings, with associated data such as problematic sub-shapes, can be obtained by method GetReport().
-
-@section upgrade_occt721 Upgrade to OCCT 7.2.1
-
-@subsection upgrade_721_Changes_In_USD Changes in ShapeUpgrade_UnifySameDomain
-
-The following public methods in the class ShapeUpgrade_UnifySameDomain became protected:
-* *UnifyFaces*
-* *UnifyEdges*
-
-The following public method has been removed:
-* *UnifyFacesAndEdges*
-
-@subsection upgrade_721_Move_BuildPCurveForEdgeOnPlane Moving BuildPCurveForEdgeOnPlane from BOPTools_AlgoTools2D to BRepLib
-
-The methods BuildPCurveForEdgeOnPlane and BuildPCurveForEdgesOnPlane have been moved from the class BOPTools_AlgoTools2D
-to the more lower level class BRepLib.
-
-@subsection upgrade_721_removed Removed features
-
-The following obsolete features have been removed:
-* The package BOPCol has been fully removed:
-  - *BOPCol_BaseAllocator* is replaced with *Handle(NCollection_BaseAllocator)*;
-  - *BOPCol_BoxBndTree* is replaced with *BOPTools_BoxBndTree*;
-  - *BOPCol_Box2DBndTree* is removed as unused;
-  - *BOPCol_DataMapOfIntegerInteger* is replaced with *TColStd_DataMapOfIntegerInteger*;
-  - *BOPCol_DataMapOfIntegerListOfInteger* is replaced with *TColStd_DataMapOfIntegerListOfInteger*;
-  - *BOPCol_DataMapOfIntegerListOfShape* is replaced with *TopTools_DataMapOfIntegerListOfShape*;
-  - *BOPCol_DataMapOfIntegerMapOfInteger.hxx* is removed as unused;
-  - *BOPCol_DataMapOfIntegerReal* is replaced with *TColStd_DataMapOfIntegerReal*;
-  - *BOPCol_DataMapOfIntegerShape* is replaced with *TopTools_DataMapOfIntegerShape*;
-  - *BOPCol_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
-  - *BOPCol_DataMapOfShapeInteger* is replaced with *TopTools_DataMapOfShapeInteger*;
-  - *BOPCol_DataMapOfShapeListOfShape* is replaced with *TopTools_DataMapOfShapeListOfShape*;
-  - *BOPCol_DataMapOfShapeReal* is replaced with *TopTools_DataMapOfShapeReal*;
-  - *BOPCol_DataMapOfShapeShape* is replaced with *TopTools_DataMapOfShapeShape*;
-  - *BOPCol_DataMapOfTransientAddress* is removed as unused;
-  - *BOPCol_IndexedDataMapOfIntegerListOfInteger* is removed as unused;
-  - *BOPCol_IndexedDataMapOfShapeBox* is removed as unused;
-  - *BOPCol_IndexedDataMapOfShapeInteger* is removed as unused;
-  - *BOPCol_IndexedDataMapOfShapeListOfShape* is replaced with *TopTools_IndexedDataMapOfShapeListOfShape*;
-  - *BOPCol_IndexedDataMapOfShapeReal* is removed as unused;
-  - *BOPCol_IndexedDataMapOfShapeShape* is replaced with *TopTools_IndexedDataMapOfShapeShape*;
-  - *BOPCol_IndexedMapOfInteger* is replaced with *TColStd_IndexedMapOfInteger*;
-  - *BOPCol_IndexedMapOfOrientedShape* is replaced with *TopTools_IndexedMapOfOrientedShape*;
-  - *BOPCol_IndexedMapOfShape* is replaced with *TopTools_IndexedMapOfShape*;
-  - *BOPCol_ListOfInteger* is replaced with *TColStd_ListOfInteger*;
-  - *BOPCol_ListOfListOfShape* is replaced with *TopTools_ListOfListOfShape*;
-  - *BOPCol_ListOfShape* is replaced with *TopTools_ListOfShape*;
-  - *BOPCol_MapOfInteger* is replaced with *TColStd_MapOfInteger*;
-  - *BOPCol_MapOfOrientedShape* is replaced with *TopTools_MapOfOrientedShape*;
-  - *BOPCol_MapOfShape* is replaced with *TopTools_MapOfShape*;
-  - *BOPCol_PListOfInteger* is removed as unused;
-  - *BOPCol_PInteger* is removed as unused
-  - *BOPCol_SequenceOfPnt2d* is replaced with *TColgp_SequenceOfPnt2d*;
-  - *BOPCol_SequenceOfReal* is replaced with *TColStd_SequenceOfReal*;
-  - *BOPCol_SequenceOfShape* is replaced with *TopTools_SequenceOfShape*;
-  - *BOPCol_Parallel* is replaced with *BOPTools_Parallel*;
-  - *BOPCol_NCVector* is replaced with *NCollection_Vector*;
-* The class *BOPDS_PassKey* and containers for it have been removed as unused.
-* The unused containers from *IntTools* package have been removed:
-  - *IntTools_DataMapOfShapeAddress* is removed as unused;
-  - *IntTools_IndexedDataMapOfTransientAddress* is removed as unused;
-* The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
-* The class *BOPTools* has been removed as duplicate of the class *TopExp*;
-* The method *BOPAlgo_Builder::Splits()* has been removed as excessive. The method *BOPAlgo_Builder::Images()* can be used instead.
-* The method *BOPTools_AlgoTools::CheckSameGeom()* has been removed as excessive. The method *BOPTools_AlgoTools::AreFacesSameDomain()* can be used instead.
-
-@section upgrade_occt730 Upgrade to OCCT 7.3.0
-
-@subsection upgrade_730_lights Light sources
-
-Multiple changes have been applied to lights management within *TKV3d* and *TKOpenGl*:
-* *V3d_Light* class is now an alias to *Graphic3d_CLight*.
-  *Graphic3d_CLight* is now a Handle class with refactored methods for managing light source parameters.
-  Most methods of *V3d_Light* sub-classes have been preserved to simplify porting.
-* Obsolete debugging functionality for drawing a light source has been removed from *V3d_Light*.
-  Methods and constructors that take parameters for debug display and do not affect the light definition itself have also been removed.
-* Light constructors taking *V3d_Viewer* have been marked as deprecated.
-  Use method *AddLight()* of the class *V3d_Viewer* or *V3d_View* to add new light sources to a scene or a single view, respectively.
-* The upper limit of 8 light sources has been removed.
-* The classes for specific light source types: *V3d_AmbientLight, V3d_DirectionalLight, V3d_PositionalLight* and *V3d_SpotLight* have been preserved, but it is now possible to define the light of any type by creating base class *Graphic3d_CLight* directly. The specific classes only hide unrelated light properties depending on the type of light source.
-* It is no more required to call *V3d_Viewer::UpdateLights()* after modifying the properties of light sources (color, position, etc.)
-
-@subsection upgrade_730_shadingmodels Shading Models
-
-*Graphic3d_AspectFillArea3d* has been extended by a new property *ShadingModel()*, which previously has been defined globally for the entire View.
-
-Previously, a triangle array without normal vertex attributes was implicitly considered as unshaded,
-but now such array will be shaded using *Graphic3d_TOSM_FACET* model (e.g. by computing per-triangle normals).
-Therefore, *Graphic3d_TOSM_UNLIT* should be explicitly specified to disable shading of triangles array.
-Alternatively, a material without reflectance properties can be used to disable shading (as before).
-
-@subsection upgrade_730_tkopengl Custom low-level OpenGL elements
-
-The following API changes should be considered while porting custom *OpenGl_Element* objects:
-* *OpenGl_ShaderManager::BindFaceProgram()*, *BindLineProgram()*, *BindMarkerProgram()* now take enumeration arguments instead of Boolean flags.
-
-@subsection upgrade_730_BOPAlgo_Section Changes in BOPAlgo_Section
-
-The public method *BuildSection()* in the class *BOPAlgo_Section* has become protected. The methods *Perform()* or *PerformWithFiller()* should be called for construction of the result of SECTION operation.
-
-@subsection upgrade_730_BRepAdaptor_CompCurve Changes in BRepAdaptor_CompCurve
-
-The method *BRepAdaptor_CompCurve::SetPeriodic* has been eliminated.
-Since the new version, the method *BRepAdaptor_CompCurve::IsPeriodic()* will always return FALSE. Earlier, it could return TRUE in case if the wire contained only one edge based on a periodic curve. 
-
-@subsection upgrade_730_removed Removed features
-* The methods *SetDeflection*, *SetEpsilonT*, *SetDiscretize* of the class *IntTools_EdgeFace* have been removed as redundant.
-* Deprecated functionality *V3d_View::Export()*, related enumerations Graphic3d_ExportFormat, Graphic3d_SortType
-  as well as optional dependency from gl2ps library have been removed.
-
-@subsection upgrade_730_BuilderSolid Boolean Operations - Solid Builder algorithm
-
-Previously, the unclassified faces of *BOPAlgo_BuilderSolid* algorithm (i.e. the faces not used for solids creation and located outside of all created solids) were used to form an additional (not closed) solid with INTERNAL orientation.
-Since the new version, these unclassified faces are no longer added into the resulting solids. Instead, the @ref occt_algorithms_ers "warning" with a list of these faces appears.
-
-The following public methods of the *BOPAlgo_BuilderSolid* class have been removed as redundant:
-* *void SetSolid(const TopoDS_Solid& theSolid);*
-* *const TopoDS_Solid& Solid() const;*
-
-@subsection upgrade_730_BRepAlgoBO Boolean Operation classes in BRepAlgo are deprecated
-
-The API classes in the package BRepAlgo providing access to old Boolean operations are marked as deprecated:
-* BRepAlgo_Fuse
-* BRepAlgo_Common
-* BRepAlgo_Cut
-* BRepAlgo_Section
-Corresponding classes from the package BRepAlgoAPI should be used instead.
-
-@subsection upgrade_730_replace_CDM_MessageDriver_interface_by_Message_Messenger Unification of the Error/Warning reporting system of Application Framework
-
-Class *CDM_MessageDriver* and its descendants have been removed; class *Message_Messenger* is used instead in all OCAF packages.
-By default, messenger returned by *Message::DefaultMessenger()* is used, thus all messages generated by OCAF are directed in the common message queue of OCCT.
-
-In classes implementing OCAF persistence for custom attributes (those inheriting from *BinMDF_ADriver*, *XmlMDF_ADriver*), uses of method *WriteMessage()* should be replaced by call to method *Send()* of the inherited field *myMessageDriver*. Note that this method takes additional argument indicating the gravity of the message (Trace, Info, Warning, Alarm, or Fail).
-
-Class *Message_PrinterOStream* can be used instead of *CDM_COutMessageDriver* to direct all messages to a stream.
-If custom driver class is used in the application, that class shall be reimplemented inheriting from *Message_Printer* instead of *CDM_MessageDriver*.
-Method *Send()* should be redefined instead of method *Write()* of *CDM_MessageDriver*.
-To use the custom printer in OCAF, it can be either added to default messenger or set into the custom *Message_Messenger* object created in the method *MessageDriver()* of a class inheriting *CDF_Application*.
-
-@section upgrade_occt740 Upgrade to OCCT 7.4.0
-
-@subsection upgrade_740_BRepPrimAPI_MakeRevol Changes in BRepPrimAPI_MakeRevol algorithm
-Previously the algorithm could create a shape with the same degenerated edge shared between some faces. Now it is prevented. The algorithm creates the different copy of this edge for each face. The method *Generated(...)* has been changed in order to apply restriction to the input shape: input shape can be only of type VERTEX, EDGE, FACE or SOLID. For input shape of another type the method always returns empty list.
-
-@subsection upgrade_740_removed Removed features
-* The following methods of the class *BRepAlgoAPI_BooleanOperation* have been removed as obsolete or replaced:
-  - *BuilderCanWork* can be replaced with *IsDone* or *HasErrors* method.
-  - *FuseEdges* removed as obsolete.
-  - *RefineEdges* replaced with new method *SimplifyResult*.
-* The method *ImagesResult* of the class *BOPAlgo_BuilderShape* has been removed as unused. The functionality of this method can be completely replaced by the history methods *Modified* and *IsDeleted*.
-* The method *TrackHistory* of the classes *BOPAlgo_RemoveFeatures* and *BRepAlgoAPI_Defeaturing* has been renamed to *SetToFillHistory*.
-* The method *GetHistory* of the class *BRepAlgoAPI_Defeaturing* has been renamed to *History*.
-* The classes *BRepAlgo_BooleanOperations* and *BRepAlgo_DSAccess* have been removed as obsolete. Please use the BRepAlgoAPI_* classes to perform Boolean operations.
-* *BRepAlgo_DataMapOfShapeBoolean* has been removed as unused.
-* *BRepAlgo_DataMapOfShapeInterference* has been removed as unused.
-* *BRepAlgo_EdgeConnector* has been removed as unused.
-* *BRepAlgo_SequenceOfSequenceOfInteger* has been removed as unused.
-
-@subsection upgrade_740_localcontext Local Context removal
-
-Previously deprecated Local Context functionality has been removed from AIS package,
-so that related methods have been removed from AIS_InteractiveContext interface:
-*HasOpenedContext()*, *HighestIndex()*, *LocalContext()*, *LocalSelector()*, *OpenLocalContext()*, *CloseLocalContext()*,
-*IndexOfCurrentLocal()*, *CloseAllContexts()*, *ResetOriginalState()*, *ClearLocalContext()*, *UseDisplayedObjects()*, *NotUseDisplayedObjects()*,
-*SetShapeDecomposition()*, *SetTemporaryAttributes()*, *ActivateStandardMode()*, *DeactivateStandardMode()*, *KeepTemporary()*,
-*SubIntensityOn()*, *SubIntensityOff()*, *ActivatedStandardModes()*, *IsInLocal()*, *AddOrRemoveSelected()* taking TopoDS_Shape.
-
-A set of deprecated methods previously related to Local Context and now redirecting to other methods has been preserved to simplify porting; they will be removed in next release.
-
-@subsection upgrade_740_geomconvert Changes in behavior of Convert algorithms
-
-Now methods *GeomConvert::ConcatG1*, *GeomConvert::ConcatC1*, *Geom2dConvert::ConcatG1*, *Geom2dConvert::ConcatC1* modify the input argument representing the flag of closedness.
-
-@subsection upgrade_740_selection Changes in selection API and picked point calculation algorithm.
-
-*SelectBasics_PickResult* structure has been extended, so that it now defines a 3D point on the detected entity in addition to Depth value along picking ray.
-*SelectMgr_SelectingVolumeManager::Overlap()* methods have been corrected to fill in *SelectBasics_PickResult* structure (depth and 3D point) instead of only depth value, so that custom *Select3D_SensitiveEntity* implementation should be updated accordingly (including *Select3D_SensitiveSet* subclasses).
-
-@subsection upgrade_740_ocafpersistence Document format version management improvement.
-
-Previously Document format version restored by *DocumentRetrievalDriver* was propagated using static methods of the corresponding units (like *MDataStd* or *MNaming*) to static variables of these units and after that became accessible to Drivers of these units.
-Now Document format version is available to drivers via *RelocationTable*. The Relocation table now keeps *HeaderData* of the document and a format version can be extracted in the following way: *theRelocTable.GetHeaderData()->StorageVersion()*.
-Obsolete methods: *static void SetDocumentVersion (const Standard_Integer DocVersion)* and *static Standard_Integer DocumentVersion()* have been removed from *BinMDataStd*, *BinMNaming*, *XmlMDataStd* and *XmlMNaming*.
-
-@subsection upgrade_740_changed_api_of_brepmesh BRepMesh - revision of the data model
-
-The entire structure of *BRepMesh* component has been revised and separated into several logically connected classes.
-
-In new version, deflection is controlled more accurately, this may be necessary to tune parameters of call of the BRepMesh algorithm on the application side to obtain the same quality of presentation and/or performance as before.
-
-*BRepMesh_FastDiscret* and *BRepMesh_FastDiscretFace* classes have been removed.
-
-The following changes have been introduced in the API of *BRepMesh_IncrementalMesh*, component entry point:
-* Due to revised logic, *adaptiveMin* parameter of the constructor has been removed as meaningless;
-* *BRepMesh_FastDiscret::Parameters* has been moved to a separate structure called *IMeshTools_Parameters*; the signatures of related methods have been changed correspondingly.
-
-* Interface of *BRepMesh_Delaun* class has been changed.
-
-Example of usage:
-Case 1 (explicit parameters):
-~~~~
-#include <IMeshData_Status.hxx>
-#include <IMeshTools_Parameters.hxx>
-#include <BRepMesh_IncrementalMesh.hxx>
-
-Standard_Boolean meshing_explicit_parameters()
-{
-  BRepMesh_IncrementalMesh aMesher (aShape, 0.1, Standard_False, 0.5, Standard_True);
-  const Standard_Integer aStatus = aMesher.GetStatusFlags();
-  return !aStatus;
-}
-
-Standard_Boolean meshing_new()
-{
-  IMeshTools_Parameters aMeshParams;
-  aMeshParams.Deflection               = 0.1;
-  aMeshParams.Angle                    = 0.5;
-  aMeshParams.Relative                 = Standard_False;
-  aMeshParams.InParallel               = Standard_True;
-  aMeshParams.MinSize                  = Precision::Confusion();
-  aMeshParams.InternalVerticesMode     = Standard_True;
-  aMeshParams.ControlSurfaceDeflection = Standard_True;
-
-  BRepMesh_IncrementalMesh aMesher (aShape, aMeshParams);
-  const Standard_Integer aStatus = aMesher.GetStatusFlags();
-  return !aStatus;
-}
-~~~~
-
-@subsection upgrade_740_chamfer Changes in API of Chamfer algorithms
-
-Some public methods of the class BRepFilletAPI_MakeChamfer are released from excess arguments:
- method Add for symmetric chamfer now takes only 2 arguments: distance and edge;
- method GetDistAngle now takes only 3 arguments: index of contour, distance and angle.
-
-@subsection upgrade_740_aspects Aspects unification
-
-Fill Area, Line and Marker aspects (classes *Graphic3d_AspectFillArea3d*, *Graphic3d_AspectLine3d*, *Graphic3d_AspectMarker3d* and *Graphic3d_AspectText3d*)
-have been merged into new class *Graphic3d_Aspects* providing a single state for rendering primitives of any type.
-The old per-primitive type aspect classes have been preserved as sub-classes of *Graphic3d_Aspects* with default values close to the previous behavior.
-All aspects except Graphic3d_AspectFillArea3d define Graphic3d_TOSM_UNLIT shading model.
-
-The previous approach with dedicated aspects per primitive type was handy in simplified case, but lead to confusion otherwise.
-In fact, drawing points or lines with lighting applied is a valid use case, but only *Graphic3d_AspectFillArea3d* previously defined necessary material properties.
-
-As aspects for different primitive types have been merged, Graphic3d_Group does no more provide per-type aspect properties.
-Existing code relying on old behavior and putting interleaved per-type aspects into single Graphic3d_Group should be updated.
-For example, the following pseudo-code will not work anymore, because all *SetGroupPrimitivesAspect* calls will setup the same property:
-~~~~
-Handle(Graphic3d_Group) aGroup = thePrs->NewGroup();
-aGroup->SetGroupPrimitivesAspect (myDrawer->ShadingAspect()->Aspect());
-aGroup->SetGroupPrimitivesAspect (myDrawer->LineAspect()->Aspect());    //!< overrides previous aspect
-
-Handle(Graphic3d_ArrayOfSegments) aLines = new Graphic3d_ArrayOfSegments (2);
-Handle(Graphic3d_ArrayOfTriangles) aTris = new Graphic3d_ArrayOfTriangles (3);
-aGroup->AddPrimitiveArray (aLines); //!< both arrays will use the same aspect
-aGroup->AddPrimitiveArray (aTris);
-~~~~
-
-To solve the problem, the code should be modified to either put primitives into dedicated groups (preferred approach), or using *SetPrimitivesAspect* in proper order:
-~~~~
-Handle(Graphic3d_Group) aGroup = thePrs->NewGroup();
-
-aGroup->SetGroupPrimitivesAspect (myDrawer->ShadingAspect()->Aspect());
-Handle(Graphic3d_ArrayOfTriangles) aTris = new Graphic3d_ArrayOfTriangles (3);
-aGroup->AddPrimitiveArray (aTris);
-
-Handle(Graphic3d_ArrayOfSegments) aLines = new Graphic3d_ArrayOfSegments (2);
-aGroup->SetPrimitivesAspect (myDrawer->LineAspect()->Aspect()); //!< next array will use the new aspect
-aGroup->AddPrimitiveArray (aLines);
-~~~~
-
-@subsection upgrade_740_materials Material definition
-
-Decomposition of Ambient, Diffuse, Specular and Emissive properties has been eliminated within *Graphic3d_MaterialAspect* definition.
-As result, the following methods of *Graphic3d_MaterialAspect* class have been removed: SetReflectionMode(), SetReflectionModeOn(), Ambient(), Diffuse(), Emissive(), Specular(), SetAmbient(), SetDiffuse(), SetSpecular(), SetEmissive().
-
-Previously, computation of final value required the following code:
-~~~~
-Graphic3d_MaterialAspect theMaterial; Quantity_Color theInteriorColor;
-Graphic3d_Vec3 anAmbient (0.0f);
-if (theMaterial.ReflectionMode (Graphic3d_TOR_AMBIENT))
-{
-  anAmbient = theMaterial.MaterialType (Graphic3d_MATERIAL_ASPECT)
-            ? (Graphic3d_Vec3 )theInteriorColor           * theMaterial.Ambient()
-            : (Graphic3d_Vec3 )theMaterial.AmbientColor() * theMaterial.Ambient();
-}
-~~~~
-
-New code looks like this:
-~~~~
-Graphic3d_MaterialAspect theMaterial; Quantity_Color theInteriorColor;
-Graphic3d_Vec3 anAmbient = theMaterial.AmbientColor();
-if (theMaterial.MaterialType (Graphic3d_MATERIAL_ASPECT)) { anAmbient *= (Graphic3d_Vec3 )theInteriorColor; }
-~~~~
-
-Existing code should be updated to:
- Replace Graphic3d_MaterialAspect::SetReflectionModeOff() with setting black color; SetReflectionModeOn() calls can be simply removed.
-  R.g. theMaterial.SetAmbientColor(Quantity_NOC_BLACK).
- Replace Graphic3d_MaterialAspect::Ambient(), SetAmbient(), Diffuse(), SetDiffuse(), Specular(), SetSpecular(), Emissive(), SetEmissive() with methods working with pre-multiplied color.
-  E.g. theMaterial.SetAmbientColor(Graphic3d_Vec3 (1.0f, 0.0f, 0.0f) * 0.2f).
- Avoid using Graphic3d_MaterialAspect::Color() and SetColor() with non-physical materials (Graphic3d_MATERIAL_ASPECT).
-  These materials do not include color definition, because it is taken from Graphic3d_Aspects::InteriorColor() - this has not been changed.
-  However, previously it was possible storing the color with SetColor() call and then fetching it with Color() by application code (the rendering ignored this value);
-  now SetColor() explicitly ignores call for Graphic3d_MATERIAL_ASPECT materials and Color() returns DiffuseColor() multiplication coefficients.
-
-@subsection upgrade_740_text Changes in Graphic3d_Text and OpenGl_Text API
-
-Parameters of *Text* in *Graphic3d_Group* are moved into a new *Graphic3d_Text* class. *AddText* of *Graphic3d_Group* should be used instead of the previous *Text*.
-
-The previous code:
-~~~~
-Standard_Real x, y, z;
-theAttachmentPoint.Coord(x,y,z);
-theGroup->Text (theText,
-                Graphic3d_Vertex(x,y,z),
-                theAspect->Height(),
-                theAspect->Angle(),
-                theAspect->Orientation(),
-                theAspect->HorizontalJustification(),
-                theAspect->VerticalJustification());
-~~~~
-should be replaced by the new code:
-~~~~
-Handle(Graphic3d_Text) aText = new Graphic3d_Text (theAspect->Height());
-aText->SetText (theText.ToExtString());
-aText->SetPosition (theAttachmentPoint);
-aText->SetHorizontalAlignment (theAspect->HorizontalJustification());
-aText->SetVerticalAlignment (theAspect->VerticalJustification());
-theGroup->AddText (aText);
-~~~~
-
-*OpenGl_Text* contains *Graphic3d_Text* field.
-
-*OpenGl_TextParam* struct is removed. Constructor and *Init* of *OpenGl_Text* with *OpenGl_TextParam* are also removed.
-Instead of using them, change *OpenGl_Text*.
-
-Please, note, that after modifying *OpenGl_Text*, *Reset* of *OpenGl_Text* should be called.
-
-*FormatParams* of *OpenGl_Text* is replaced by *Text*.
-
-@subsection upgrade_740_prsupdate Presentation invalidation
-
-Historically AIS_InteractiveObject provided two independent mechanisms invalidating presentation (asking presentation manager to recompute specific display mode or all modes):
-
-1. *AIS_InteractiveObject::SetToUpdate()*, marking existing presentation for update.
-   This is main invalidation API, which is expected to be followed by *AIS_InteractiveContext::Update()* call.
-2. *AIS_InteractiveObject::myToRecomputeModes* + *myRecomputeEveryPrs*.
-   This is auxiliary invalidation API, used internally by AIS_InteractiveContext::SetColor()/UnsetColor() and similar modification methods.
-
-The latter one has been removed to avoid confusion and unexpected behavior.
-In addition, two methods *AIS_InteractiveObject::Update()* have been deprecated in favor of new *AIS_InteractiveObject::UpdatePresentations()* recomputing only invalidated presentations.
-
-Custom presentations implementing interface methods *AIS_InteractiveObject::SetColor()* and others should be revised to use *AIS_InteractiveObject::SetToUpdate()*
-or updating presentation without recomputation (see *AIS_InteractiveObject::SynchronizeAspects()* and *AIS_InteractiveObject::replaceAspects()*).
-
-@subsection upgrade_740_interiorstyles Interior styles
-
-* *Aspect_IS_HOLLOW* is now an alias to *Aspect_IS_EMPTY* and does not implicitly enables drawing mesh edges anymore.
-  Specify Graphic3d_AspectFillArea3d::SetDrawEdges(true) with Graphic3d_AspectFillArea3d::SetInteriorStyle(Aspect_IS_EMPTY) to get previous behavior of Aspect_IS_HOLLOW style.
-* *Aspect_IS_HIDDENLINE* does not implicitly enables drawing mesh edges anymore.
-  Specify Graphic3d_AspectFillArea3d::SetDrawEdges(true) with Graphic3d_AspectFillArea3d::SetInteriorStyle(Aspect_IS_HIDDENLINE) to get previous behavior of Aspect_IS_HIDDENLINE style.
-
-@subsection upgrade_740_modedprs PrsMgr and SelectMgr hierarchy clean up
-
-Proxy classes *Prs3d_Presentation*, *PrsMgr_ModedPresentation* and *PrsMgr_Prs* have been removed.
-Code iterating through the list of low-level structures AIS_InteractiveObject::Presentations() should be updated to access PrsMgr_Presentation directly.
-Forward declarations of *Prs3d_Presentation* should be corrected, since it is now a typedef to *Graphic3d_Structure*.
-
-Proxy classes *SelectBasics_SensitiveEntity* and *SelectBasics_EntityOwner* have been removed - *Select3D_SensitiveEntity* and *SelectMgr_EntityOwner* should be now used directly instead.
-
-@subsection upgrade_740_offset Polygon offset defaults
-
-*Graphic3d_PolygonOffset* default constructor has been corrected to define Units=1 instead of Units=0.
-Default polygon offset settings Mode=Aspect_POM_Fill + Factor=1 + Units=1 are intended to push triangulation
-(Shaded presentation) a little bit behind of lines (Wireframe and Face Edges)
-for reducing z-fighting effect of Shaded+Wireframe combination.
-The change in defaults (Units changed from 0 to 1) is intended to cover scenario when camera direction is perpendicular to model plane (like 2D view).
-
-Application observing unexpected visual difference on this change should consider customizing this property within AIS_InteractiveContext default attributes
-or on per-presentation basis via *Graphic3d_Aspects::SetPolygonOffset()* methods.
-
-@subsection upgrade_740_zlayer Adding ZLayers in given position
-
-Interface of insertion ZLayer in the viewer has been improved with ability to insert new layer before or after existing one.
-Previously undocumented behavior of *V3d_Viewer::AddZlayer()* method has been corrected to insert new layer before *Graphic3d_ZLayerId_Top*.
-Applications might need revising their custom layers creation code and specify precisely their order with new methods *V3d_Viewer::InsertLayerBefore()* and *V3d_Viewer::InsertLayerAfter()*.
-
-@subsection upgrade_740_enum_changed Modified enumerations
-
-Applications using integer values of the following enumerations in persistence
-should be corrected as these enumerations have been modified:
-
-| Name |
-| :----- |
-| AIS_TypeOfAttribute |
-| Aspect_InteriorStyle |
-| Font_FontAspect |
-
-@subsection upgrade_740_geproj Custom defines within env.bat
-
-*env.bat* produced by Visual Studio project generator *genproj.bat* has been modified so that *%CSF_DEFINES%* variable is reset to initial state.
-Custom building environment relying on old behavior and setting extra macros within *%CSF_DEFINES%* before env.bat should be updated
-to either modify custom.bat or setup new variable *%CSF_DEFINES_EXTRA%* instead.
-
-@subsection upgrade_740_BVH_in_BOP Switching Boolean Operations algorithm to use BVH tree instead of UB tree
-
-Since OCCT 7.4.0 Boolean Operations algorithm uses BVH tree instead of UBTree to find the pairs of entities with interfering bounding boxes.
-The following API changes have been made:
-* BOPTools_BoxBndTree and BOPTools_BoxBndTreeSelector have been removed. Use the BOPTools_BoxTree and BOPTools_BoxTreeSelector instead.
-* BOPTools_BoxSelector::SetBox() method now accepts the BVH_Box instead of Bnd_Box.
-* Methods BOPTools_BoxSelector::Reject and BOPTools_BoxSelector::Accept have been removed as unused.
-* The RunParallel flag has been removed from the list of parameters of BOPAlgo_Tools::IntersectVertices method. Earlier, it performed selection from the UB tree in parallel mode. Now all interfering pairs are found in one pass, using pair traverse of the same BVH tree.
-
-@subsection upgrade_740_stdnamespace Standard_Stream.hxx no more has "using std::" statements
-*Standard_Stream.hxx* header, commonly included by other OCCT header files, does no more add entities from *std namespace* related to streams (like *std::cout*, *std::istream* and others) into global namespace.
-The application code relying on this matter should be updated to either specify std namespace explicitly (like std::cout) or add "using std::" statements locally.
--- a/dox/overview/images/overview_3rdparty.png
+++ b/dox/overview/images/overview_3rdparty.png
--- a/dox/overview/images/overview_installation.png
+++ b/dox/overview/images/overview_installation.png
--- a/dox/overview/overview.md
+++ b/dox/overview/overview.md
@@ -18,7 +18,7 @@ modeling (CAD), manufacturing / measuring (CAM) or numerical simulation (CAE).
@section OCCT_OVW_SECTION_2 Copyrights

 Open CASCADE Technology and all materials, including this documentation, is 
-Copyright (c) 1999-2018 by OPEN CASCADE S.A.S. All rights reserved.
+Copyright (c) 1999-2017 by OPEN CASCADE S.A.S. All rights reserved.

@htmlonly<center>@endhtmlonly
 https://www.opencascade.com
@@ -32,7 +32,7 @@ Open CASCADE Technology is free software; you can redistribute it and / or modif
@ref license_lgpl_21 "GNU Lesser General Public License (LGPL) version 2.1", with additional @ref occt_lgpl_exception "exception".

 Note that LGPL imposes some obligations on the application linked with Open CASCADE Technology.
-If you wish to use OCCT in a proprietary application, please pay a special attention to address the requirements of LGPL section 6.
+If you wish to use OCCT in a proprietary application, please, pay special attention to address the requirements of LGPL section 6.
 At minimum the following should be considered:
 1. Add the notice visible to the users of your application clearly stating that Open CASCADE Technology is used in this application, and that they have rights in this regard according to LGPL. 
   Such notice can be added in About dialog box (this is mandatory if this box contains copyright statements) or a similar place and/or in the documentation. 
@@ -55,7 +55,7 @@ disclaimer.

 You are hereby informed that all software is a property of its respective authors and is protected by 
 international and domestic laws on intellectual property and trademarks. 
-Should you need further information, directly contact the authors.
+Should you need further information, please directly contact the authors.

 **CAS.CADE** and **Open CASCADE** are registered trademarks of 
 OPEN CASCADE S.A.S.
@@ -80,7 +80,7 @@ and, in case you need any further information, directly contact their authors.
 **Qt** is a cross-platform application framework that is widely used for developing application software 
 with graphical user interface (GUI). Qt is free and open source software distributed under 
 the terms of the GNU Lesser General Public License. In OCCT Qt is used for programming samples. 
-If you need further information on Qt, refer to Qt Homepage (https://www.qt.io/)
+If you need further information on Qt, please, refer to Qt Homepage (https://www.qt.io/)

 **Tcl** is a high-level programming language. Tk is a graphical user interface (GUI) toolkit, 
 with buttons, menus, listboxes, scrollbars, and so on. Taken together Tcl and Tk provide a solution 
@@ -88,7 +88,11 @@ to develop cross-platform graphical user interfaces with a native look and feel.
 Scriptics Corp., Sun Microsystems, and other companies. However, Tcl/Tk is an open source, and 
 the copyright allows you to use, modify, and redistribute Tcl/Tk for any purpose, without an 
 explicit license agreement and without paying any license fees or royalties. 
-To use Tcl/Tk, refer to the Licensing Terms (https://www.tcl.tk/software/tcltk/license.html).
+To use Tcl/Tk, please refer to the Licensing Terms (https://www.tcl.tk/software/tcltk/license.html).
+
+**GL2PS** is developed by Christophe Geuzaine and others. It is optionally used by OCCT to
+export content of OpenGL scene to vector graphics formats (PS, PDF, EMF, SVG). 
+The library is licensed under GL2PS license (http://www.geuz.org/gl2ps/COPYING.GL2PS).

 **FreeType 2** is developed by Antoine Leca, David Turner, Werner Lemberg and others. 
 It is a software font engine that is designed to be small, efficient, highly customizable and 
@@ -109,18 +113,18 @@ implementation of 3D viewer. OpenGL specification is developed by the
 Khronos group, https://www.khronos.org/opengl/. OCCT code includes header 
 file *glext.h* obtained from Khronos web site.

-**VTK** -- The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, refer to VTK Homepage https://www.vtk.org/.
+**VTK** -- The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, please, refer to VTK Homepage http://www.vtk.org/.

 **Doxygen** developed by Dimitri van Heesch is open source documentation system for 
 C++, C, Java, Objective-C, Python, IDL, PHP and C#. This product is used in Open CASCADE Technology 
 for automatic creation of Technical Documentation from C++ header files. 
-If you need further information on Doxygen, refer to https://www.stack.nl/~dimitri/doxygen/index.html.
+If you need further information on Doxygen, please refer to https://www.stack.nl/~dimitri/doxygen/index.html.

 **Graphviz** is open source graph visualization software developed by John Ellson, Emden Gansner, Yifan Hu and Arif Bilgin. 
 Graph visualization is representiation of structured information as diagrams of abstract graphs and networks. 
 This product is used together with Doxygen in Open CASCADE Technology for automatic creation of Technical Documentation 
 (generation of dependency graphs). Current versions of Graphviz are licensed on an open source 
-basis under The Eclipse Public License (EPL) (https://www.graphviz.org/license/).
+basis under The Eclipse Public License (EPL) (http://www.graphviz.org/License.php).

 **Inno Setup** is a free script-driven installation system created in CodeGear Delphi by Jordan Russell. 
 In OCCT Inno Setup is used to create Installation Wizard on Windows. 
@@ -130,10 +134,7 @@ It is licensed under Inno Setup License (http://www.jrsoftware.org/files/is/lice
 and others used by multimedia applications. This library is developed by Hervé Drolon and Floris van den Berg. 
 FreeImage is easy to use, fast, multithreading safe, compatible with all 32-bit or 64-bit versions of Windows, 
 and cross-platform (works both with Linux and Mac OS X). FreeImage is optionally used by OCCT to work
-with images, on conditions of the FreeImage Public License (FIPL) (https://freeimage.sourceforge.net/freeimage-license.txt).
-
-**David M. Gay's floating point routines** (dtoa.c) are used for fast reading of floating point values from text strings.
-These routines are available under MIT-like license (see https://www.netlib.org/fp/).
+with images, on conditions of the FreeImage Public License (FIPL) (http://freeimage.sourceforge.net/freeimage-license.txt).

 **CMake** is an open-source, cross-platform family of tools designed to build, test and package software. CMake is used to control the software compilation process using simple platform and compiler independent configuration files, and generate native makefiles and workspaces that can be used in the compiler environment of your choice. 
 OCCT uses CMake as a build system. CMake is available under BSD 3-Clause license. See more at https://cmake.org/
@@ -150,9 +151,6 @@ FFmpeg is optionally used by OCCT for video recording, on LGPL conditions (https
 for generation of User and Developer Guides in PDF format. See https://miktex.org for information
 on this tool.

-**RapidJSON** is an Open Source JSON parser and generator for C++.
-RapidJSON is optionally used by OCCT for reading glTF files (https://rapidjson.org/).
-
 Adobe Systems, Inc. provides **Adobe Reader**, which can be used to view files in Portable Document Format (PDF). 

@section OCCT_OVW_SECTION_3 Documentation
@@ -207,12 +205,13 @@ for which OCCT is certified to work.

 | OS        | Compiler |
 | --------- | ----------- |
-| Windows   | Microsoft Visual Studio: 2008 SP1, 2010 SP1, 2012 Update 4, 2013 Update 5, 2015 Update 3, 2017 <sup>1</sup>, 2019 <br> GCC 4.3+ (Mingw-w64)|
+| Windows   | Microsoft Visual Studio: 2008 SP1, 2010 SP1<sup>1</sup>, 2012 Update 4, 2013 Update 5, 2015, 2017 <br> GCC 4.3+ (Mingw-w64)|
 | Linux     | GNU gcc 4.3+ <br> LLVM CLang 3.6+ |
 | OS X / macOS | XCode 6 or newer |
 | Android   | NDK r10, GNU gcc 4.8 or newer |

-1) VC++ 141 64-bit is used for regular testing and for building binary package of official release of OCCT on Windows.
+1) VC++ 10 64-bit is used for regular testing and for building 
+  binary package of official release of OCCT on Windows.

@subsection overview_req_libs Third-party libraries

@@ -221,12 +220,12 @@ for which OCCT is certified to work.
 | Graphic library | OpenGL 3.3+, OpenGL ES 2.0+ <br> Direct3D 9 |
 | Qt (for samples and demos) | Desktop: Qt 4.8.6+ https://www.qt.io/download/ <br> Android: Qt 5.3.2+ https://www.qt.io/download/ |
 | TCL (for testing tools)    | Tcl/Tk 8.6.3+ https://www.tcl.tk/software/tcltk/download.html <br> or ActiveTcl 8.6 https://www.activestate.com/activetcl/downloads (for Windows)| 
-| Freetype (for text rendering) | FreeType 2.4.11-2.7.1 https://sourceforge.net/projects/freetype/files/ |
+| Freetype (for text rendering) | FreeType 2.4.11-2.5.5 https://sourceforge.net/projects/freetype/files/ |
 | FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ https://sourceforge.net/projects/freeimage/files |
 | FFmpeg (optional, for video recording) | FFmpeg 3.1+ https://www.ffmpeg.org/download.html |
-| RapidJSON (optional, for reading glTF) | RapidJSON 1.1+ https://rapidjson.org/ |
+| gl2ps (optional, for export contents of OCCT viewer to vector formats) | gl2ps-1.3.8+  http://geuz.org/gl2ps/ |
 | Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x https://www.threadingbuildingblocks.org/ |
-| VTK (for VTK Integration Services | VTK 6.1+ https://www.vtk.org/download/ |
+| VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/download/ |
 | Doxygen (optional for building documentation) | Doxygen 1.8.5+ https://www.stack.nl/~dimitri/doxygen/download.html |

@subsection overview_req_hw Hardware
@@ -284,13 +283,13 @@ When the installation is complete, you will find the directories for 3rd party p

@figure{/overview/images/overview_3rdparty.png}

-The contents of the OCCT-7.4.0 directory (called further "OCCT root", or $CASROOT) are as follows:
+The contents of the OCCT-7.0.0 directory (called further "OCCT root", or $CASROOT) are as follows:

@figure{/overview/images/overview_installation.png, "The directory tree"}

  * **adm**   This folder contains administration files, which allow rebuilding OCCT;
  * **adm/cmake**  This folder contains files of CMake building procedure;
-  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++ 2010, 2012, 2013, 2015, 2017 and 2019 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
+  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++  2005, 2008, 2010, 2012 and 2013 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
  * **data**  This folder contains CAD files in different formats, which can be used to test the OCCT functionality;
  * **doc**  This folder contains OCCT documentation in HTML and PDF format;
  * **dox**  This folder contains sources of OCCT documentation in plain text (MarkDown) format;
@@ -298,7 +297,6 @@ The contents of the OCCT-7.4.0 directory (called further "OCCT root", or $CASROO
  * **samples**  This folder contains sample applications.
  * **src**  This folder contains OCCT source files. They are organized in folders, one per development unit;
  * **tests**  This folder contains scripts for OCCT testing.
-  * **tools**  This folder contains sources of Inspector tool.
  * **win64/vc10**  This folder contains executable and library files built in optimize mode for Windows platform by Visual C++  2010;

@section OCCT_OVW_SECTION_4_2 Environment Variables
@@ -309,7 +307,7 @@ To run any Open CASCADE Technology application you need to set the environment v

 You can define the environment variables with env.bat script located in the 
 $CASROOT folder. This script accepts two arguments to be used: 
-the version of Visual Studio (vc10 -- vc142) and the architecture (win32 or win64).
+the version of Visual Studio (vc8 -- vc12) and the architecture (win32 or win64).

 The additional environment settings necessary for compiling OCCT libraries and samples 
 by Microsoft Visual Studio can be set using script custom.bat located in the same folder. 
@@ -332,7 +330,7 @@ The scripts are located in the OCCT root folder.

  * **CASROOT** is used to define the root directory of Open CASCADE Technology;
  * **PATH** is required to define the path to OCCT binaries and 3rdparty folder;
-  * **LD_LIBRARY_PATH** is required to define the path to OCCT libraries (on UNIX platforms only; **DYLD_LIBRARY_PATH** variable in case of macOS);
+  * **LD_LIBRARY_PATH** is required to define the path to OCCT libraries (on UNIX platforms only);
  * **MMGT_OPT** (optional) if set to 1, the memory manager performs optimizations as described below; if set to 2, 
    Intel (R) TBB optimized memory manager is used; if 0 (default), every memory block is allocated 
    in C memory heap directly (via malloc() and free() functions). 
@@ -399,7 +397,7 @@ the specified resource file and activates the commands implemented in the plug-i
 The whole process of using the plug-in mechanism as well as the instructions for extending Test Harness is described in the @ref occt_user_guides__test_harness.

 Draw Test Harness provides an environment for OCCT automated testing system. 
-Check its @ref occt_dev_guides__tests "Automated Testing System" for details.
+Please, consult its @ref occt_dev_guides__tests "Automated Testing System" for details.

 Remarks:

@@ -413,7 +411,8 @@ Remarks:

 **On Linux:**

-* If OCCT was built by Code::Blocks  use <i>$CASROOT/draw.sh</i> file to launch *DRAWEXE* executable.
+1. If OCCT was built by Code::Blocks  use <i>$CASROOT/draw_cbp.sh</i> file to launch *DRAWEXE* executable;
+2. If OCCT was built by Automake    use <i>$CASROOT/draw_amk.sh</i> file to launch *DRAWEXE* executable;

 Draw[1]> prompt appears in the command window

--- a/dox/resources/occ_logo.png
+++ b/dox/resources/occ_logo.png
--- a/dox/resources/occt_rm.doxyfile
+++ b/dox/resources/occt_rm.doxyfile
@@ -23,7 +23,7 @@ WARNINGS               = NO
 ENABLE_PREPROCESSING   = YES
 MACRO_EXPANSION        = YES
 EXPAND_ONLY_PREDEF     = YES
-PREDEFINED             = Standard_EXPORT Standard_NODISCARD Standard_OVERRIDE:=override __Standard_API __Draw_API Handle(a):=Handle<a> DEFINE_STANDARD_ALLOC DEFINE_NCOLLECTION_ALLOC "Standard_DEPRECATED=//! @deprecated "
+PREDEFINED             = Standard_EXPORT Standard_OVERRIDE:=override __Standard_API __Draw_API Handle(a):=Handle<a> DEFINE_STANDARD_ALLOC DEFINE_NCOLLECTION_ALLOC
 GENERATE_HTML          = YES
 GENERATE_LATEX         = NO
 SEARCH_INCLUDES        = YES
--- a/dox/resources/occt_ug_html.doxyfile
+++ b/dox/resources/occt_ug_html.doxyfile
@@ -16,6 +16,7 @@ WARNINGS               = YES
 WARN_IF_UNDOCUMENTED   = YES
 WARN_IF_DOC_ERROR      = YES
 WARN_NO_PARAMDOC       = NO
+WARN_FORMAT            = \\$file:\$line: \$text\
 INPUT_ENCODING         = UTF-8
 FILE_PATTERNS          = *.md *.dox 
 RECURSIVE              = YES
@@ -55,6 +56,6 @@ USE_MATHJAX            = YES
 MATHJAX_FORMAT         = HTML-CSS

 # Define alias for inserting images in uniform way (both HTML and PDF)
-ALIASES += figure{1}="\image html \1"
-ALIASES += figure{2}="\image html \1 \2"
-ALIASES += figure{3}="\image html \1 \2"
+ALIASES += figure{1}="\image html \1 \n"
+ALIASES += figure{2}="\image html \1 \2 \n"
+ALIASES += figure{3}="\image html \1 \2 \n"
--- a/dox/resources/occt_ug_pdf.doxyfile
+++ b/dox/resources/occt_ug_pdf.doxyfile
@@ -16,6 +16,7 @@ WARNINGS               = YES
 WARN_IF_UNDOCUMENTED   = YES
 WARN_IF_DOC_ERROR      = YES
 WARN_NO_PARAMDOC       = NO
+WARN_FORMAT            = \\$file:\$line: \$text\
 INPUT_ENCODING         = UTF-8
 FILE_PATTERNS          = *.md *.dox 
 RECURSIVE              = YES
--- a/dox/technical_overview/technical_overview.md
+++ b/dox/technical_overview/technical_overview.md
@@ -56,9 +56,9 @@ This module also provides a variety of general-purpose services, such as:
  * Progress indication and user break interfaces, giving a possibility even for low-level algorithms to communicate with the user in a universal and convenient way;
  * and many others...

-See the details in @ref occt_user_guides__foundation_classes "Foundation Classes User's Guide"
+Please, see the details in @ref occt_user_guides__foundation_classes "Foundation Classes User's Guide"

-See also: our <a href="https://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.

@section OCCT_TOVW_SECTION_3 Modeling Data

@@ -85,12 +85,12 @@ Topology defines relationships between simple geometric entities.  A shape, whic

 Complex shapes can be defined as assemblies of simpler entities.

-See the details in @ref occt_user_guides__modeling_data "Modeling Data User's Guide"
+Please, see the details in @ref occt_user_guides__modeling_data "Modeling Data User's Guide"

 3D geometric models can be stored in OCCT native BREP format.
 See @ref occt_user_guides__brep_wp "BREP Format Description White Paper" for details on the format.

-See also: our <a href="https://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.

@section OCCT_TOVW_SECTION_4 Modeling Algorithms

@@ -147,9 +147,9 @@ See @ref occt_user_guides__boolean_operations "Boolean Operations" User's Guide

@figure{/technical_overview/images/0004.png}
 
-See the details in @ref occt_user_guides__modeling_algos "Modeling Algorithms User's Guide".
+Please, see the details in @ref occt_user_guides__modeling_algos "Modeling Algorithms User's Guide".

-See also: our <a href="https://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.

@section OCCT_TOVW_SECTION_4a Mesh 

@@ -163,8 +163,8 @@ Open CASCADE Technology includes two mesh converters:
 - STL converter translates Open CASCADE shapes to STL files. STL (STtereoLithography) format is widely used for rapid prototyping (3D printing).

 Open CASCADE SAS also offers Advanced Mesh Products:
- <a href="https://www.opencascade.com/content/mesh-framework">Open CASCADE Mesh Framework (OMF)</a>
- <a href="https://www.opencascade.com/content/express-mesh">Express Mesh</a>
+- <a href="http://www.opencascade.com/content/mesh-framework">Open CASCADE Mesh Framework (OMF)</a>
+- <a href="http://www.opencascade.com/content/express-mesh">Express Mesh</a>

@figure{/technical_overview/images/0003.png}

@@ -204,11 +204,11 @@ Here are just a few examples:

@figure{/technical_overview/images/0008.png, "Display of shape cross-section and dimensions"}

-For more details, see @ref occt_user_guides__visualization "Visualization User's Guide".
+For more details see @ref occt_user_guides__visualization "Visualization User's Guide".

 The visualization of OCCT topological shapes by means of VTK library provided by VIS component is described in a separate @ref occt_user_guides__vis "VTK Integration Services" User's Guide.

-See also: our <a href="https://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.


@section OCCT_TOVW_SECTION_6 Data Exchange
@@ -222,14 +222,12 @@ See also: our <a href="https://www.opencascade.com/content/tutorial-learning">E-
 * **Standardized Data Exchange** interfaces allow querying and examining the input file, converting its contents to a CAD model and running validity checks on a fully translated shape. The following formats are currently supported.
 	* @ref occt_user_guides__step "STEP" (AP203 : Mechanical Design, this covers General 3D CAD; AP214: Automotive Design) 
 	* @ref occt_user_guides__iges "IGES" (up to 5.3) 
-	* glTF, OBJ, VRML and STL meshes.
+	* VRML and STL meshes. 
 * @ref occt_user_guides__xde "Extended data exchange" (XDE) allows translating  additional attributes attached to geometric data (colors, layers, names, materials etc).
-* <a href="https://www.opencascade.com/content/advanced-data-exchange-components">Advanced Data Exchange Components</a> are available in addition to standard Data Exchange interfaces to support interoperability and data adaptation (also using @ref OCCT_TOVW_SECTION_6a "Shape Healing") with CAD software using the following proprietary formats:
-	* <a href="https://www.opencascade.com/content/acis-sat-import-export">ACIS SAT</a>
-	* <a href="https://www.opencascade.com/content/parasolid-import">Parasolid</a>
-	* <a href="https://www.opencascade.com/content/dxf-import-export">DXF</a>
-	* <a href="https://www.opencascade.com/content/ifc-import">IFC</a>
-	* <a href="https://www.opencascade.com/content/jt-import-export">JT</a>
+* <a href="http://www.opencascade.com/content/advanced-data-exchange-components">Advanced Data Exchange Components</a> are available in addition to standard Data Exchange interfaces to support interoperability and data adaptation (also using @ref OCCT_TOVW_SECTION_6a "Shape Healing") with CAD software using the following proprietary formats:
+	* <a href="http://www.opencascade.com/content/acis-sat-import-export">ACIS SAT</a>
+	* <a href="http://www.opencascade.com/content/parasolid-import">Parasolid</a>
+	* <a href="http://www.opencascade.com/content/dxf-import-export">DXF</a> 

 These components are based on the same architecture as interfaces with STEP and IGES.

@@ -265,9 +263,9 @@ Each sub-domain of Shape Healing has its own scope of functionality:
 | Customization | Modifies the shape representation to fit specific needs. | The shape is not modified, only the mathematical form of its internal representation is changed. |
 | Processing | Mechanism of shape modification via a user-editable resource file. | |

-For more details, refer to @ref occt_user_guides__shape_healing "Shape Healing User's guide".
+For more details refer to @ref occt_user_guides__shape_healing "Shape Healing User's guide".

-See also: our <a href="https://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.


@section OCCT_TOVW_SECTION_7 Application Framework
@@ -287,9 +285,9 @@ OCAF differs from any other CAD framework in the organization of application dat

 OCAF organizes and embeds these attributes in a document. OCAF documents, in their turn, are managed by an OCAF application.

-For more details, see @ref occt_user_guides__ocaf "OCAF User's Guide". 
+For more details see @ref occt_user_guides__ocaf "OCAF User's Guide". 

-See also: our <a href="https://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+See also: our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.


@section OCCT_TOVW_SECTION_8 Draw Test Harness
@@ -312,4 +310,4 @@ In addition, **Test Harness** provides commands to create and manipulate curves

 You can add custom commands to test or demonstrate any new functionalities, which you develop.

-For more details, see @ref occt_user_guides__test_harness "Draw Test Harness Manual".
+For more details see @ref occt_user_guides__test_harness "Draw Test Harness Manual".
--- a/dox/tutorial/tutorial.md
+++ b/dox/tutorial/tutorial.md
@@ -701,7 +701,7 @@ Congratulations! Your bottle is complete. Here is the result snapshot of the Tut
@figure{/tutorial/images/tutorial_image019.png,"",320}

 We hope that this tutorial has provided you with a feel for the industrial strength power of Open CASCADE Technology.
-If you want to know more and develop major projects using Open CASCADE Technology, we invite you to study our training, support, and consulting services on our site at https://www.opencascade.com/content/technology-support. Our professional services can maximize the power of your Open CASCADE Technology applications.
+If you want to know more and develop major projects using Open CASCADE Technology, we invite you to study our training, support, and consulting services on our site at http://www.opencascade.com/content/technology-support. Our professional services can maximize the power of your Open CASCADE Technology applications.


@section sec6 Appendix
--- a/dox/user_guides/boolean_operations/boolean_operations.md
+++ b/dox/user_guides/boolean_operations/boolean_operations.md
@@ -548,8 +548,7 @@ The class *BOPAlgo_Options* provides the following options for the algorithms:
 * Check the presence of the Errors and Warnings;
 * Turn on/off the parallel processing;
 * Set the additional tolerance for the operation;
-* Break the operations by user request;
-* Usage of Oriented Bounding boxes in the operation.
+* Break the operations by user request.

@subsection occt_algorithms_root_classes_2 Class BOPAlgo_Algo

@@ -786,121 +785,9 @@ The types of resulting shapes depend on the type of the corresponding argument p
 | 7	| EDGE	| Set of split EDGEs	| |
 | 8	| VERTEX | VERTEX | |

-@subsection occt_algorithms_7_3a Options
-
-The General Fuse algorithm has a set of options, which allow speeding-up the operation and improving the quality of the result:
-* Parallel processing option allows running the algorithm in parallel mode;
-* Fuzzy option allows setting the additional tolerance for the operation;
-* Safe input shapes option allows preventing modification of the input shapes;
-* Gluing option allows speeding-up the intersection of the arguments;
-* Possibility to disable the check for the inverted solids among input shapes;
-* Usage of Oriented Bounding Boxes in the operation;
-* History support.
-
-For more detailed information on these options, see the @ref occt_algorithms_11a "Advanced options" section.
-
-@subsection occt_algorithms_7_3b Usage
-
-The following example illustrates how to use the GF algorithm:
-
-#### Usage of the GF algorithm on C++ level
-
-~~~~
-BOPAlgo_Builder aBuilder;
-// Setting arguments
-TopTools_ListOfShape aLSObjects = …; // Objects
-aBuilder.SetArguments(aLSObjects);
-
-// Setting options for GF
-
-// Set parallel processing mode (default is false)
-Standard_Boolean bRunParallel = Standard_True;
-aBuilder.SetRunParallel(bRunParallel);
-
-// Set Fuzzy value (default is Precision::Confusion())
-Standard_Real aFuzzyValue = 1.e-5;
-aBuilder.SetFuzzyValue(aFuzzyValue);
-
-// Set safe processing mode (default is false)
-Standard_Boolean bSafeMode = Standard_True;
-aBuilder.SetNonDestructive(bSafeMode);
-
-// Set Gluing mode for coinciding arguments (default is off)
-BOPAlgo_GlueEnum aGlue = BOPAlgo_GlueShift;
-aBuilder.SetGlue(aGlue);
-
-// Disabling/Enabling the check for inverted solids (default is true)
-Standard Boolean bCheckInverted = Standard_False;
-aBuilder.SetCheckInverted(bCheckInverted);
-
-// Set OBB usage (default is false)
-Standard_Boolean bUseOBB = Standard_True;
-aBuilder.SetUseOBB(buseobb);
-
-// Perform the operation
-aBuilder.Perform();
-
-// Check for the errors
-if (aBuilder.HasErrors())
-{
-  return;
-}
-
-// Check for the warnings
-if (aBuilder.HasWarnings())
-{
-  // treatment of the warnings
-  ...
-}
-
-// result of the operation
-const TopoDS_Shape& aResult = aBuilder.Shape();
-~~~~
-
-#### Usage of the GF algorithm on Tcl level
-
-~~~~
-# prepare the arguments
-box b1 10 10 10 
-box b2 3 4 5 10 10 10 
-box b3 5 6 7 10 10 10 
-
-# clear inner contents
-bclearobjects; bcleartools;
-
-# set the arguments
-baddobjects b1 b2 b3
-
-# setting options for GF
-
-# set parallel processing mode (default is 0)
-brunparallel 1
-
-# set Fuzzy value
-bfuzzyvalue 1.e-5
-
-# set safe processing mode (default is 0)
-bnondestructive 1
-
-# set gluing mode (default is 0)
-bglue 1
-
-# set check for inverted (default is 1)
-bcheckinverted 0
-
-# set obb usage (default is 0)
-buseobb 1
-
-# perform intersection
-bfillds
-
-# perform GF operaton
-bbuild result
-~~~~
-
@subsection occt_algorithms_7_3 Examples

-Have a look at the examples to better understand the definitions.
+Please, have a look at the examples, which can help to better understand the definitions.

@subsubsection occt_algorithms_7_3_1	Case 1: Three edges intersecting at a point 

@@ -1174,7 +1061,7 @@ The input data for this step is a *BOPAlgo_Builder* object after building result
@section occt_algorithms_8  Splitter Algorithm

 The Splitter algorithm allows splitting a group of arbitrary shapes by another group of arbitrary shapes.<br>
-It is based on the General Fuse  algorithm, thus all options of the General Fuse (see @ref occt_algorithms_7_3a "GF Options") are also available in this algorithm.
+It is based on the General Fuse  algorithm, thus all options of the General Fuse such as Fuzzy mode, safe processing mode, parallel mode, gluing mode and history support are also available in this algorithm.

@subsection occt_algorithms_8_1 Arguments

@@ -1195,18 +1082,22 @@ It is based on the General Fuse  algorithm, thus all options of the General Fuse
 On the low level the Splitter algorithm is implemented in class *BOPAlgo_Splitter*. The usage of this algorithm looks as follows:
 ~~~~~
 BOPAlgo_Splitter aSplitter;
-// Setting arguments and tools
-TopTools_ListOfShape aLSObjects = …; // Objects
-TopTools_ListOfShape aLSTools = …; // Tools
+BOPCol_ListOfShape aLSObjects = …; // Objects
+BOPCol_ListOfShape aLSTools = …; // Tools
+Standard_Boolean bRunParallel = Standard_False; /* parallel or single mode (the default value is FALSE)*/
+Standard_Real aTol = 0.0; /* fuzzy option (default value is 0)*/
+Standard_Boolean bSafeMode = Standard_False; /* protect or not the arguments from modification*/
+BOPAlgo_Glue aGlue = BOPAlgo_GlueOff; /* Glue option to speed up intersection of the arguments*/
+// setting arguments
 aSplitter.SetArguments(aLSObjects);
 aSplitter.SetTools(aLSTools);
-
-// Set options for the algorithm
-// setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-...
-
-// Perform the operation
-aSplitter.Perform();
+// setting options
+aSplitter.SetRunParallel(bRunParallel);
+aSplitter.SetFuzzyValue(aTol);
+aSplitter.SetNonDestructive(bSafeMode);
+aSplitter.SetGlue(aGlue);
+//
+aSplitter.Perform(); //perform the operation
 if (aSplitter.HasErrors()) { //check error status
  return;
 }
@@ -1891,21 +1782,6 @@ The input data for this step is as follows:
 | 2.3 |	Build solids <i>(SDi)</i> from *SFS*. |	*BOPAlgo_BuilderSolid* |
 | 2.4 |	Add the solids <i>(SDi)</i> to the result	| |

-@subsection occt_algorithms_bop_on_opensolids Boolean operations on open solids
-
-The Boolean operations on open solids are tricky enough that the standard approach of Boolean operations for building the result, based on the splits of solids does not work.
-It happens because the algorithm for splitting solids (*BOPAlgo_BuilderSolid*) always tries to create the closed loops (shells) and make solids from them. But if the input solid is not closed, what can be expected from its splits?
-For performing Boolean Operations on open solids another approach is used, which does not rely on the splits of the solids to be correct, but tries to select the splits of faces, which are necessary for the given type of operation.
-The point here is that the type of Boolean operation clearly defines the states for the faces to be taken into result:
- For **COMMON** operation all the faces from the arguments located inside any solid of the opposite group must be taken;
- For **FUSE** operation all the faces from the arguments located outside of all solids of the opposite group must be taken;
- For **CUT** operation all the faces from the Objects located outside of all solids of the Tools and all faces from the Tools located inside any solid of the Objects must be taken;
- For **CUT21** operation all the faces from the Objects located inside any solid of the Tools and all faces from the Tools located outside of all solids of the Objects must be taken.
-From the selected faces the result solids are built. Please note, that the result may contain as normal (closed) solids as the open ones.
-
-Even with this approach, the correct result of Boolean operation on open solids cannot be always guaranteed.
-This is explained by non-manifold nature of open solids: in some cases classification of a face depends on the point of the face chosen for classification.
-
@section occt_algorithms_10a Section Algorithm 

@subsection occt_algorithms_10a_1 Arguments
@@ -2165,7 +2041,7 @@ The algorithm creates only closed solids. In general case the result solids are
 But the algorithm allows preventing the addition of the internal for solids parts into result. In this case the result solids will be manifold and not contain any internal parts. However, this option does not prevent from the occurrence of the internal edges or vertices in the faces.<br>
 Non-closed faces, free wires etc. located outside of any solid are always excluded from the result.

-The Volume Maker algorithm is implemented in the class BOPAlgo_MakerVolume. It is based on the General Fuse (GF) algorithm. All the options of the GF algorithm (see @ref occt_algorithms_7_3a "GF Options") are also available in this algorithm.
+The Volume Maker algorithm is implemented in the class BOPAlgo_MakerVolume. It is based on the General Fuse (GF) algorithm. All the options of the GF algorithm such as possibility to run algorithm in parallel mode, fuzzy option, safe mode, glue options and history support are also available in this algorithm.

 The requirements for the arguments are the same as for the arguments of GF algorithm - they could be of any type, but each argument should be valid and not self-interfered.

@@ -2178,19 +2054,23 @@ This option is useful e.g. for building a solid from the faces of one shell or f
 The usage of the algorithm on the API level:
 ~~~~
 BOPAlgo_MakerVolume aMV;
-// Set the arguments
-TopTools_ListOfShape aLS = …; // arguments
+BOPCol_ListOfShape aLS = …; // arguments
+Standard_Boolean bRunParallel = Standard_False; /* parallel or single mode (the default value is FALSE)*/
+Standard_Boolean bIntersect = Standard_True; /* intersect or not the arguments (the default value is TRUE)*/
+Standard_Real aTol = 0.0; /* fuzzy option (default value is 0)*/
+Standard_Boolean bSafeMode = Standard_False; /* protect or not the arguments from modification*/
+BOPAlgo_Glue aGlue = BOPAlgo_GlueOff; /* Glue option to speed up intersection of the arguments*/
+Standard_Boolean bAvoidInternalShapes = Standard_False; /* Avoid or not the internal for solids shapes in the result*/
+//
 aMV.SetArguments(aLS);
-
-// Set options for the algorithm
-// setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-...
-// Additional option of the algorithm
-Standard_Boolean bAvoidInternalShapes = Standard_False; // Set to True to exclude from the result any shapes internal to the solids
+aMV.SetRunParallel(bRunParallel);
+aMV.SetIntersect(bIntersect);
+aMV.SetFuzzyValue(aTol);
+aMV.SetNonDestructive(bSafeMode);
+aMV.SetGlue(aGlue);
 aMV.SetAvoidInternalShapes(bAvoidInternalShapes);
-
-// Perform the operation
-aMV.Perform();
+//
+aMV.Perform(); //perform the operation
 if (aMV.HasErrors()) { //check error status
  return;
 }
@@ -2248,7 +2128,7 @@ The algorithm can also create containers from the connected Cells added into res

 The algorithm has been implemented in the *BOPAlgo_CellsBuilder* class.

-Cells Builder is based on the General Fuse algorithm. Thus all options of the General Fuse algorithm (see @ref occt_algorithms_7_3a "GF Options") are also available in this algorithm.
+Cells Builder is based on the General Fuse algorithm. Thus all options of the General Fuse algorithm, such as parallel processing mode, fuzzy mode, safe processing mode, gluing mode and history support are also available in this algorithm.

 The requirements for the input shapes are the same as for General Fuse - each argument should be valid in terms of *BRepCheck_Analyzer* and *BOPAlgo_ArgumentAnalyzer*.

@@ -2268,14 +2148,18 @@ It is possible to create typed Containers from the parts added into result by us
 Here is the example of the algorithm use on the API level:
 ~~~~
 BOPAlgo_CellsBuilder aCBuilder;
-// Set the arguments
-TopTools_ListOfShape aLS = …; // arguments
+BOPCol_ListOfShape aLS = …; // arguments
+Standard_Boolean bRunParallel = Standard_False; /* parallel or single mode (the default value is FALSE)*/
+Standard_Real aTol = 0.0; /* fuzzy option (the default value is 0)*/
+Standard_Boolean bSafeMode = Standard_False; /* protect or not the arguments from modification*/
+BOPAlgo_Glue aGlue = BOPAlgo_GlueOff; /* Glue option to speed up the intersection of arguments*/
+//
 aCBuilder.SetArguments(aLS);
-
-// Set options for the algorithm
-// setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-...
-
+aCBuilder.SetRunParallel(bRunParallel);
+aCBuilder.SetFuzzyValue(aTol);
+aCBuilder.SetNonDestructive(bSafeMode);
+aCBuilder.SetGlue(aGlue);
+//
 aCBuilder.Perform(); // build splits of all arguments (GF)
 if (aCBuilder.HasErrors()) { // check error status
  return;
@@ -2285,8 +2169,8 @@ if (aCBuilder.HasErrors()) { // check error status
 const TopoDS_Shape& anEmptyRes = aCBuilder.Shape(); // empty result, as nothing has been added yet 
 const TopoDS_Shape& anAllCells = aCBuilder.GetAllParts(); //all split parts 
 //
-TopTools_ListOfShape aLSToTake = ...; // parts of these arguments will be taken into result
-TopTools_ListOfShape aLSToAvoid = ...; // parts of these arguments will not be taken into result
+BOPCol_ListOfShape aLSToTake = ...; // parts of these arguments will be taken into result
+BOPCol_ListOfShape aLSToAvoid = ...; // parts of these arguments will not be taken into result
 //
 Standard_Integer iMaterial = 1; // defines the material for the cells
 Standard_Boolean bUpdate = Standard_False; // defines whether to update the result right now or not
@@ -2443,7 +2327,7 @@ A lot of failures of GFA algorithm can be caused by bugs in low-level algorithms
 * The Projection Algorithm is used at the Intersection step. The purpose of Projection Algorithm is to compute 2D curves on surfaces. Wrong results here lead to incorrect or missing faces in the final GFA result. 
 * The Classification Algorithm is used at the Building step. The bugs in the Classification Algorithm lead to errors in selecting shape parts (edges, faces, solids) and ultimately to a wrong final GFA result.

-The description below illustrates some known GFA limitations. It does not enumerate exhaustively all problems that can arise in practice. Please address cases of Algorithm failure to the OCCT Maintenance Service.
+The description below illustrates some known GFA limitations. It does not enumerate exhaustively all problems that can arise in practice. Please, address cases of Algorithm failure to the OCCT Maintenance Service.


@subsection occt_algorithms_10_1	Arguments
@@ -2539,7 +2423,7 @@ Let us also consider a cylinder-based *Face 2* with radii *R=3000* and *H=6000*

@figure{/user_guides/boolean_operations/images/operations_image047.png,"P-Curves for Face 2",230}

-Pay attention to the Zoom value of the Figures.
+Please, pay attention to the Zoom value of the Figures.

 It is obvious that starting with some value of *ScF*, e.g. *ScF>1000000*, all sloped p-Curves on *Face 2*  will be almost vertical. At least, there will be no difference between the values of angles computed by standard C Run-Time Library functions, such as *double acos(double x)*. The loss of accuracy in computation of angles can cause failure of some BP sub-algorithms, such as building faces from a set of edges or building solids from a set of faces.

@@ -2834,63 +2718,6 @@ To enable the safe processing mode for the operation in DRAW, it is necessary to
 bnondestructive 1
 ~~~~

-@subsection occt_algorithms_11a_4 How to disable check of input solids for inverted status
-
-By default, all input solids are checked for inverted status, i.e. the solids are classified to understand if they are holes in the space (negative volumes) or normal solids (positive volumes). The possibility to disable the check of the input solids for inverted status is the advanced option in Boolean Operation component. This option can be applied to all Basic operations, such as General Fuse, Splitting, Boolean, Section, Maker Volume and Cells building.
-This option allows avoiding time-consuming classification of the input solids and processing them in the same way as positive volumes, saving up to 10 percent of time on the cases with a big number of input solids.
-
-The classification should be disabled only if the user is sure that there are no negative volumes among the input solids, otherwise the result may be invalid.
-
-@subsubsection occt_algorithms_11a_4_1 Usage
-
-#### API level
-
-To enable/disable the classification of the input solids it is necessary to call *SetCheckInverted()* method with the appropriate value:
-~~~~
-BOPAlgo_Builder aGF;
-//
-....
-// disabling the classification of the input solid
-aGF.SetCheckInverted(Standard_False);
-//
-....
-~~~~
-
-#### TCL level
-To enable/disable the classification of the solids in DRAW, it is necessary to call *bcheckinverted* command with the appropriate value:
-* 0 - disabling the classification;
-* 1 - default value, enabling the classification.
-
-~~~~
-bcheckinverted 0
-~~~~
-
-@subsection occt_algorithms_11a_5_obb Usage of Oriented Bounding Boxes
-
-Since Oriented Bounding Boxes are usually much tighter than Axes Aligned Bounding Boxes (for more information on OBB see the @ref occt_modat_6 "Bounding boxes" chapter of Modeling data User guide) its usage can significantly speed-up the intersection stage of the operation by reducing the number of interfering objects.
-
-@subsubsection occt_algorithms_11a_5_obb_1 Usage
-
-#### API level
-To enable/disable the usage of OBB in the operation it is necessary to call the *SetUseOBB()* method with the approriate value:
-~~~~
-BOPAlgo_Builder aGF;
-//
-....
-// Enabling the usage of OBB in the operation
-aGF.SetUseOBB(Standard_True);
-//
-....
-~~~~
-
-#### TCL level
-To enable/disable the usage of OBB in the operation in DRAW it is necessary to call the *buseobb* command with the approriate value: 
-* 0 - disabling the usage of OBB;
-* 1 - enabling the usage of OBB.
-~~~~
-buseobb 1
-~~~~
-
@section occt_algorithms_ers Errors and warnings reporting system

 The chapter describes the Error/Warning reporting system of the algorithms in the Boolean Component.
@@ -2944,192 +2771,6 @@ Warning: The positioning of the shapes leads to creation of small edges without
 ~~~~


-@section occt_algorithms_history History Information
-
-All operations in Boolean Component support @ref occt_modalg_hist "History information". This chapter describes how the History is filled for these operations.
-
-Additionally to Vertices, Edges and Faces the history is also available for the Solids.
-
-The rules for filling the History information about Deleted and Modified shapes are the same as for the API algorithms.
-
-Only the rules for Generated shapes require clarification.
-In terms of the algorithms in Boolean Component the shape from the arguments can have Generated shapes only if these new shapes 
-have been obtained as a result of pure intersection (not overlapping) of this shape with any other shapes from arguments. Thus, the Generated shapes are always:
-* VERTICES created from the intersection points and may be Generated from edges and faces only;
-* EDGES created from the intersection edges and may be Generated from faces only.
-
-So, only EDGES and FACES could have information about Generated shapes. For all other types of shapes the list of Generated shapes will be empty.
-
-@subsection occt_algorithms_history_ex Examples
-
-Here are some examples illustrating the History information.
-
-@subsubsection occt_algorithms_history_ex_del Deleted shapes
-
-The result of CUT operation of two overlapping planar faces (see the example below) does not contain any parts from the tool face. Thus, the tool face is considered as Deleted.
-If the faces are not fully coinciding, the result must contain some parts of the object face. In this case object face will be considered as not deleted.
-But if the faces are fully coinciding, the result must be empty, and both faces will be considered as Deleted.
-
-Example of the overlapping faces:
-
-~~~~
-plane p 0 0 0 0 0 1
-mkface f1 p -10 10 -10 10
-mkface f2 p 0 20 -10 10
-
-bclearobjects
-bcleartools
-baddobjects f1
-baddtools f2
-bfillds
-bbop r 2
-
-savehistory cut_hist
-isdeleted cut_hist f1
-# Not deleted
-
-isdeleted cut_hist f2
-# Deleted
-~~~~
-
-@subsubsection occt_algorithms_history_ex_modif Modified shapes
-
-In the FUSE operation of two edges intersecting in one point (see the example below), both edges will be split by the intersection point. All these splits will be contained in the result.
-Thus, each of the input edges will be Modified into its two splits.
-But in the CUT operation on the same edges, the tool edge will be Deleted from the result and, thus, will not have any Modified shapes.
-
-Example of the intersecting edges:
-~~~~
-line l1 0 0 0 1 0 0
-mkedge e1 l1 -10 10
-
-line l2 0 0 0 0 1 0
-mkedge e2 l2 -10 10
-
-bclearobjects
-bcleartools
-baddobjects e1
-baddtools e2
-bfillds
-
-# fuse operation
-bbop r 1
-
-savehistory fuse_hist
-
-modified m1 fuse_hist e1
-nbshapes m1
-# EDGES: 2
-
-modified m2 fuse_hist e2
-nbshapes m2
-# EDGES: 2
-
-# cut operation
-bbop r 2
-
-savehistory cut_hist
-
-modified m1 cut_hist e1
-nbshapes m1
-# EDGES: 2
-
-modified m2 cut_hist e2
-# The shape has not been modified
-~~~~
-
-
-@subsubsection occt_algorithms_history_gen Generated shapes
-
-Two intersecting edges will both have the intersection vertices Generated from them.
-
-As for the operation with intersecting faces, consider the following example:
-
-~~~~
-plane p1 0 0 0 0 0 1
-mkface f1 p1 -10 10 -10 10
-
-plane p2 0 0 0 1 0 0
-mkface f2 p2 -10 10 -10 10
-
-bclearobjects
-bcleartools
-baddobjects f1
-baddtools f2
-bfillds
-
-# fuse operation
-bbop r 1
-
-savehistory fuse_hist
-
-generated gf1 fuse_hist f1
-nbshapes gf1
-# EDGES: 1
-
-generated gf2 fuse_hist f2
-nbshapes gf2
-# EDGES: 1
-
-
-# common operation - result is empty
-bbop r 0
-
-savehistory com_hist
-
-generated gf1 com_hist f1
-# No shapes were generated from the shape
-
-generated gf2 com_hist f2
-# No shapes were generated from the shape
-
-~~~~
-
-@section occt_algorithms_simplification BOP result simplification
-
-The API algorithms implementing Boolean Operations provide possibility to simplify the result shape by unification of the connected tangential edges and faces.
-This simplification is performed by the method *SimplifyResult* which is implemented in the class *BRepAlgoAPI_BuilderAlgo* (General Fuse operation).
-It makes it available for users of the classes *BRepAlgoAPI_BooleanOperation* (all Boolean Operations) and *BRepAlgoAPI_Splitter* (split operation).
-
-The simplification is performed by the means of *ShapeUpgrade_UnifySameDom* algorithm. The result of operation is overwritten with the simplified result.
-
-The simplification is performed without creation of the Internal shapes, i.e. shapes connections will never be broken. It is performed on the whole result shape.
-Thus, if the input shapes contained connected tangent edges or faces unmodified during the operation they will also be unified.
-
-History of the simplification is merged into the main history of operation, thus it will be accounted when asking for Modified, Generated and Deleted shapes.
-
-Some options of the main operation are passed into the Unifier:
- Fuzzy tolerance of the operation is given to the Unifier as the linear tolerance.
- Non destructive mode here controls the safe input mode in Unifier.
-
-For controlling this possibility in DRAW the command **bsimplify** has been implemented. See the @ref occt_draw_bop_options "Boolean Operations options" chapter in draw user guide.
-
-
-@subsection occt_algorithms_simplification_examples Examples
-
-Here is the simple example of simplification of the result of Fuse operation of two boxes:
-
-~~~~
-bsimplify -f 1
-
-box b1 10 10 15
-box b2 3 7 0 10 10 15
-bclearobjects
-bcleartools
-baddobjects b1
-baddtools b2
-bfillds
-bapibop r 1
-~~~~
-
-<table align="center">
-  <tr>
-    <td>@figure{/user_guides/boolean_operations/images/bop_simple_001.png, "Not simplified result", 420}</td>
-    <td>@figure{/user_guides/boolean_operations/images/bop_simple_002.png, "Simplified result", 420}</td>
-  </tr>
-</table>
-
-
@section occt_algorithms_11b Usage 

 The chapter contains some examples of the OCCT Boolean Component usage. The usage is possible on two levels: C++ and Tcl. 
@@ -3172,18 +2813,41 @@ The following example illustrates how to use General Fuse operator:
 #include <TopTools_ListOfShape.hxx>
 #include <BRepAlgoAPI_BuilderAlgo.hxx>
 {…
+  Standard_Boolean bRunParallel;
+  Standard_Real aFuzzyValue;
  BRepAlgoAPI_BuilderAlgo aBuilder;
  //
  // prepare the arguments
  TopTools_ListOfShape& aLS=…;
  //
+  bRunParallel=Standard_True;
+  aFuzzyValue=2.1e-5;
+  //
  // set the arguments	
  aBuilder.SetArguments(aLS);
-  
-  // Set options for the algorithm
-  // setting options on this level is similar to setting options to GF algorithm on low level (see "GF Usage" chapter)
-  ...
-
+  // set parallel processing mode 
+  // if  bRunParallel= Standard_True :  the parallel processing is switched on
+  // if  bRunParallel= Standard_False :  the parallel processing is switched off
+  aBuilder.SetRunParallel(bRunParallel);
+  //
+  // set Fuzzy value
+  // if aFuzzyValue=0.: the Fuzzy option is off
+  //  if aFuzzyValue>0.: the Fuzzy option is on
+  aBuilder.SetFuzzyValue(aFuzzyValue);
+  //
+  // safe mode - avoid modification of the arguments
+  Standard_Boolean bSafeMode = Standard_True;
+  // if bSafeMode == Standard_True  - the safe mode is switched on
+  // if bSafeMode == Standard_False - the safe mode is switched off
+  aBuilder.SetNonDestructive(bSafeMode);
+  //
+  // gluing options - for coinciding arguments
+  BOPAlgo_GlueEnum aGlueOpt = BOPAlgo_GlueFull;
+  // if aGlueOpt == BOPAlgo_GlueOff   - the gluing mode is switched off
+  // if aGlueOpt == BOPAlgo_GlueShift - the gluing mode is switched on
+  // if aGlueOpt == BOPAlgo_GlueFull  - the gluing mode is switched on
+  aBuilder.SetGlue(aGlueOpt);
+  //
  // run the algorithm 
  aBuilder.Build(); 
  if (aBuilder.HasErrors()) {
@@ -3210,10 +2874,28 @@ bclearobjects; bcleartools;
 #
 # set the arguments
 baddobjects b1 b2 b3
-
-# set options for the algorithm (see "GF Usage" chapter)
-...
-
+# set parallel processing mode
+# 1:  the parallel processing is switched on
+# 0:  the parallel processing is switched off
+brunparallel 1 
+#
+# set Fuzzy value
+# 0.    : the Fuzzy option is off
+# >0. : the Fuzzy option is on
+bfuzzyvalue 0.
+#
+# set safe processing mode
+bnondestructive 1
+# set safe mode
+# 1 - the safe processing mode is switched on
+# 0 - the safe processing mode is switched off
+#
+# set gluing mode
+bglue 1
+# set the gluing mode
+# 1 or 2 - the gluing mode is switched on
+# 0 - the gluing mode is switched off
+#
 # run the algorithm
 # r is the result of the operation
 bapibuild r 
@@ -3242,9 +2924,31 @@ TopTools_ListOfShape& aLSTools = … ;
 aSplitter.SetArguments(aLSObjects);
 aSplitter.SetTools(aLSTools);
 //
-// Set options for the algorithm
-// setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-...
+// set options
+// parallel processing mode 
+Standard_Boolean bRunParallel = Standard_True;
+// bRunParallel == Standard_True  - the parallel processing is switched on
+// bRunParallel == Standard_False - the parallel processing is switched off
+aSplitter.SetRunParallel();
+//
+// fuzzy value - additional tolerance for the operation
+Standard_Real aFuzzyValue = 1.e-5;
+// if aFuzzyValue == 0. - the Fuzzy option is off
+// if aFuzzyValue > 0.  - the Fuzzy option is on
+aSplitter.SetFuzzyValue(aFuzzyValue);
+//
+// safe mode - avoid modification of the arguments
+Standard_Boolean bSafeMode = Standard_True;
+// if bSafeMode == Standard_True  - the safe mode is switched on
+// if bSafeMode == Standard_False - the safe mode is switched off
+aSplitter.SetNonDestructive(bSafeMode);
+//
+// gluing options - for coinciding arguments
+BOPAlgo_GlueEnum aGlueOpt = BOPAlgo_GlueFull;
+// if aGlueOpt == BOPAlgo_GlueOff   - the gluing mode is switched off
+// if aGlueOpt == BOPAlgo_GlueShift - the gluing mode is switched on
+// if aGlueOpt == BOPAlgo_GlueFull  - the gluing mode is switched on
+aSplitter.SetGlue(aGlueOpt);
 //
 // run the algorithm 
 aSplitter.Build(); 
@@ -3277,8 +2981,27 @@ baddobjects b1 b2
 # set the tools
 baddtools f
 #
-# set options for the algorithm (see "GF Usage" chapter)
-...
+# set parallel processing mode
+# 1:  the parallel processing is switched on
+# 0:  the parallel processing is switched off
+brunparallel 1 
+#
+# set Fuzzy value
+# 0.  : the Fuzzy option is off
+# >0. : the Fuzzy option is on
+bfuzzyvalue 0.
+#
+# set safe processing mode
+bnondestructive 1
+# set safe mode
+# 1 - the safe processing mode is switched on
+# 0 - the safe processing mode is switched off
+#
+# set gluing mode
+bglue 1
+# set the gluing mode
+# 1 or 2 - the gluing mode is switched on
+# 0 - the gluing mode is switched off
 #
 # run the algorithm
 # r is the result of the operation
@@ -3311,9 +3034,28 @@ The following example illustrates how to use Common operation:
  aBuilder.SetArguments(aLS);
  aBuilder.SetTools(aLT);
  //	
-  // Set options for the algorithm
-  // setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-  ...
+  // set parallel processing mode 
+  // if  bRunParallel= Standard_True :  the parallel processing is switched on
+  // if  bRunParallel= Standard_False :  the parallel processing is switched off
+  aBuilder.SetRunParallel(bRunParallel);
+  //
+  // set Fuzzy value
+  // if aFuzzyValue=0.: the Fuzzy option is off
+  //  if aFuzzyValue>0.: the Fuzzy option is on
+  aBuilder.SetFuzzyValue(aFuzzyValue);
+  //
+  // safe mode - avoid modification of the arguments
+  Standard_Boolean bSafeMode = Standard_True;
+  // if bSafeMode == Standard_True  - the safe mode is switched on
+  // if bSafeMode == Standard_False - the safe mode is switched off
+  aBuilder.SetNonDestructive(bSafeMode);
+  //
+  // gluing options - for coinciding arguments
+  BOPAlgo_GlueEnum aGlueOpt = BOPAlgo_GlueFull;
+  // if aGlueOpt == BOPAlgo_GlueOff   - the gluing mode is switched off
+  // if aGlueOpt == BOPAlgo_GlueShift - the gluing mode is switched on
+  // if aGlueOpt == BOPAlgo_GlueFull  - the gluing mode is switched on
+  aBuilder.SetGlue(aGlueOpt);
  //
  // run the algorithm 
  aBuilder.Build(); 
@@ -3343,8 +3085,27 @@ bclearobjects; bcleartools;
 baddobjects b1 b3
 baddtools b2
 #
-# set options for the algorithm (see "GF Usage" chapter)
-...
+# set parallel processing mode
+# 1:  the parallel processing is switched on
+# 0:  the parallel processing is switched off
+brunparallel 1
+#
+# set Fuzzy value
+# 0.    : the Fuzzy option is off
+# >0. : the Fuzzy option is on
+bfuzzyvalue 0.
+#
+# set safe processing mode
+bnondestructive 1
+# set safe mode
+# 1 - the safe processing mode is switched on
+# 0 - the safe processing mode is switched off
+#
+# set gluing mode
+bglue 1
+# set the gluing mode
+# 1 or 2 - the gluing mode is switched on
+# 0 - the gluing mode is switched off
 #
 # run the algorithm
 # r is the result of the operation
@@ -3378,9 +3139,28 @@ The following example illustrates how to use Fuse operation:
  aBuilder.SetArguments(aLS);
  aBuilder.SetTools(aLT);
  //	
-  // Set options for the algorithm
-  // setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-  ...
+  // set parallel processing mode 
+  // if  bRunParallel= Standard_True :  the parallel processing is switched on
+  // if  bRunParallel= Standard_False :  the parallel processing is switched off
+  aBuilder.SetRunParallel(bRunParallel);
+  //
+  // set Fuzzy value
+  // if aFuzzyValue=0.: the Fuzzy option is off
+  //  if aFuzzyValue>0.: the Fuzzy option is on
+  aBuilder.SetFuzzyValue(aFuzzyValue);
+  //
+  // safe mode - avoid modification of the arguments
+  Standard_Boolean bSafeMode = Standard_True;
+  // if bSafeMode == Standard_True  - the safe mode is switched on
+  // if bSafeMode == Standard_False - the safe mode is switched off
+  aBuilder.SetNonDestructive(bSafeMode);
+  //
+  // gluing options - for coinciding arguments
+  BOPAlgo_GlueEnum aGlueOpt = BOPAlgo_GlueFull;
+  // if aGlueOpt == BOPAlgo_GlueOff   - the gluing mode is switched off
+  // if aGlueOpt == BOPAlgo_GlueShift - the gluing mode is switched on
+  // if aGlueOpt == BOPAlgo_GlueFull  - the gluing mode is switched on
+  aBuilder.SetGlue(aGlueOpt);
  //
  // run the algorithm 
  aBuilder.Build(); 
@@ -3410,8 +3190,27 @@ bclearobjects; bcleartools;
 baddobjects b1 b3
 baddtools b2
 #
-# set options for the algorithm (see "GF Usage" chapter)
-...
+# set parallel processing mode
+# 1:  the parallel processing is switched on
+# 0:  the parallel processing is switched off
+brunparallel 1
+#
+# set Fuzzy value
+# 0.    : the Fuzzy option is off
+# >0. : the Fuzzy option is on
+bfuzzyvalue 0.
+#
+# set safe processing mode
+bnondestructive 1
+# set safe mode
+# 1 - the safe processing mode is switched on
+# 0 - the safe processing mode is switched off
+#
+# set gluing mode
+bglue 1
+# set the gluing mode
+# 1 or 2 - the gluing mode is switched on
+# 0 - the gluing mode is switched off
 #
 # run the algorithm
 # r is the result of the operation
@@ -3445,9 +3244,28 @@ The following example illustrates how to use Cut operation:
  aBuilder.SetArguments(aLS);
  aBuilder.SetTools(aLT);
  //	
-  // Set options for the algorithm
-  // setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-  ...
+  // set parallel processing mode 
+  // if  bRunParallel= Standard_True :  the parallel processing is switched on
+  // if  bRunParallel= Standard_False :  the parallel processing is switched off
+  aBuilder.SetRunParallel(bRunParallel);
+  //
+  // set Fuzzy value
+  // if aFuzzyValue=0.: the Fuzzy option is off
+  //  if aFuzzyValue>0.: the Fuzzy option is on
+  aBuilder.SetFuzzyValue(aFuzzyValue);
+  //
+  // safe mode - avoid modification of the arguments
+  Standard_Boolean bSafeMode = Standard_True;
+  // if bSafeMode == Standard_True  - the safe mode is switched on
+  // if bSafeMode == Standard_False - the safe mode is switched off
+  aBuilder.SetNonDestructive(bSafeMode);
+  //
+  // gluing options - for coinciding arguments
+  BOPAlgo_GlueEnum aGlueOpt = BOPAlgo_GlueFull;
+  // if aGlueOpt == BOPAlgo_GlueOff   - the gluing mode is switched off
+  // if aGlueOpt == BOPAlgo_GlueShift - the gluing mode is switched on
+  // if aGlueOpt == BOPAlgo_GlueFull  - the gluing mode is switched on
+  aBuilder.SetGlue(aGlueOpt);
  //
  // run the algorithm 
  aBuilder.Build(); 
@@ -3477,8 +3295,27 @@ bclearobjects; bcleartools;
 baddobjects b1 b3
 baddtools b2
 #
-# set options for the algorithm (see "GF Usage" chapter)
-...
+# set parallel processing mode
+# 1:  the parallel processing is switched on
+# 0:  the parallel processing is switched off
+brunparallel 1
+#
+# set Fuzzy value
+# 0.    : the Fuzzy option is off
+# >0. : the Fuzzy option is on
+bfuzzyvalue 0.
+#
+# set safe processing mode
+bnondestructive 1
+# set safe mode
+# 1 - the safe processing mode is switched on
+# 0 - the safe processing mode is switched off
+# set gluing mode
+#
+bglue 1
+# set the gluing mode
+# 1 or 2 - the gluing mode is switched on
+# 0 - the gluing mode is switched off
 #
 # run the algorithm
 # r is the result of the operation
@@ -3513,9 +3350,28 @@ The following example illustrates how to use Section operation:
  aBuilder.SetArguments(aLS);
  aBuilder.SetTools(aLT);
  //	
-  // Set options for the algorithm
-  // setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
-  ...
+  // set parallel processing mode 
+  // if  bRunParallel= Standard_True :  the parallel processing is switched on
+  // if  bRunParallel= Standard_False :  the parallel processing is switched off
+  aBuilder.SetRunParallel(bRunParallel);
+  //
+  // set Fuzzy value
+  // if aFuzzyValue=0.: the Fuzzy option is off
+  //  if aFuzzyValue>0.: the Fuzzy option is on
+  aBuilder.SetFuzzyValue(aFuzzyValue);
+  //
+  // safe mode - avoid modification of the arguments
+  Standard_Boolean bSafeMode = Standard_True;
+  // if bSafeMode == Standard_True  - the safe mode is switched on
+  // if bSafeMode == Standard_False - the safe mode is switched off
+  aBuilder.SetNonDestructive(bSafeMode);
+  //
+  // gluing options - for coinciding arguments
+  BOPAlgo_GlueEnum aGlueOpt = BOPAlgo_GlueFull;
+  // if aGlueOpt == BOPAlgo_GlueOff   - the gluing mode is switched off
+  // if aGlueOpt == BOPAlgo_GlueShift - the gluing mode is switched on
+  // if aGlueOpt == BOPAlgo_GlueFull  - the gluing mode is switched on
+  aBuilder.SetGlue(aGlueOpt);
  //
  // run the algorithm 
  aBuilder.Build(); 
@@ -3545,8 +3401,27 @@ bclearobjects; bcleartools;
 baddobjects b1 b3
 baddtools b2
 #
-# set options for the algorithm (see "GF Usage" chapter)
-...
+# set parallel processing mode
+# 1:  the parallel processing is switched on
+# 0:  the parallel processing is switched off
+brunparallel 1
+#
+# set Fuzzy value
+# 0.    : the Fuzzy option is off
+# >0. : the Fuzzy option is on
+bfuzzyvalue 0.
+#
+# set safe processing mode
+bnondestructive 1
+# set safe mode
+# 1 - the safe processing mode is switched on
+# 0 - the safe processing mode is switched off
+#
+# set gluing mode
+bglue 1
+# set the gluing mode
+# 1 or 2 - the gluing mode is switched on
+# 0 - the gluing mode is switched off
 #
 # run the algorithm
 # r is the result of the operation
--- a/dox/user_guides/boolean_operations/images/bop_simple_001.png
+++ b/dox/user_guides/boolean_operations/images/bop_simple_001.png
--- a/dox/user_guides/boolean_operations/images/bop_simple_002.png
+++ b/dox/user_guides/boolean_operations/images/bop_simple_002.png
--- a/dox/user_guides/draw_test_harness/draw_test_harness.md
+++ b/dox/user_guides/draw_test_harness/draw_test_harness.md
--- a/dox/user_guides/foundation_classes/foundation_classes.md
+++ b/dox/user_guides/foundation_classes/foundation_classes.md
@@ -5,7 +5,7 @@ Foundation Classes  {#occt_user_guides__foundation_classes}

@section occt_fcug_1 Introduction

-This manual explains how to use Open CASCADE Technology (**OCCT**)  Foundation Classes. It provides basic documentation on foundation classes. For  advanced information on foundation classes and their applications, see our <a href="https://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+This manual explains how to use Open CASCADE Technology (**OCCT**)  Foundation Classes. It provides basic documentation on foundation classes. For  advanced information on foundation classes and their applications, see our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
   
 Foundation Classes provide a variety of general-purpose  services such as automated dynamic memory management (manipulation of objects  by handle), collections, exception handling, genericity by down-casting and  plug-in creation. 

@@ -183,12 +183,12 @@ The table below presents the equivalence existing between  C++ fundamental types
 | int	| Standard_Integer |
 | double 	| Standard_Real |
 | float	| Standard_ShortReal |
-| bool	| Standard_Boolean |
+| unsigned int	| Standard_Boolean |
 | char	| Standard_Character |
-| char16_t	| Standard_ExtCharacter |
+| short	| Standard_ExtCharacter |
 | char\*	| Standard_CString |
 | void\*	| Standard_Address |
-| char16_t\*	| Standard_ExtString |
+| short\*	| Standard_ExtString |

 \* The types with asterisk are pointers. 

@@ -197,12 +197,12 @@ The table below presents the equivalence existing between  C++ fundamental types
 * **Standard_Integer** : fundamental type representing 32-bit integers yielding  negative, positive or null values. *Integer* is implemented as a *typedef* of the C++ *int* fundamental type. As such, the algebraic operations  +, -, *, / as well as the ordering and equivalence relations <, <=, ==, !=, >=, >  are defined on it. 
 * **Standard_Real** : fundamental type representing real numbers with finite  precision and finite size. **Real** is implemented as a *typedef* of  the C++ *double* (double precision) fundamental type. As such, the  algebraic operations +, -, *, /, unary- and the ordering and equivalence  relations <, <=, ==, !=, >=, >  are defined on reals. 
 * **Standard_ShortReal** : fundamental type representing real numbers with finite  precision and finite size. *ShortReal* is implemented as a *typedef* of  the C++ *float* (simple precision) fundamental type. As such, the  algebraic operations +, -, *, /, unary- and the ordering and equivalence  relations <, <=, ==, !=, >=, >  are defined on reals. 
-* **Standard_Boolean** : fundamental type representing logical  expressions. It has two values: *false* and *true*. *Boolean* is implemented  as a *typedef* of the C++ *bool* fundamental type. As such,  the algebraic operations *and, or, xor* and *not* as well as equivalence relations == and != are defined on Booleans. 
+* **Standard_Boolean** : fundamental type representing logical  expressions. It has two values: *false* and *true*. *Boolean* is implemented  as a *typedef* of the C++ *unsigned int* fundamental type. As such,  the algebraic operations *and, or, xor* and *not* as well as equivalence relations == and != are defined on Booleans. 
 * **Standard_Character** : fundamental type representing the  normalized ASCII character set. It may be assigned the values of the 128 ASCII  characters. *Character* is implemented as a *typedef* of the C++ *char* fundamental type. As such, the ordering and equivalence relations <, <=, ==, !=, >=, >  are defined on characters using the order of the  ASCII chart (ex: A B). 
-* **Standard_ExtCharacter** : fundamental type representing the  Unicode character set. It is a 16-bit character type. *ExtCharacter* is  implemented as a *typedef* of the C++ *char16_t* fundamental type. As  such, the ordering and equivalence relations <, <=, ==, !=, >=, >   are defined on extended characters using the order of the UNICODE chart (ex:  A B). 
-* **Standard_CString** : fundamental type representing string  literals. A string literal is a sequence of UTF-8 (8 bits) code points enclosed in double quotes. *CString* is implemented as a *typedef* of the C++ *char* fundamental type. 
+* **Standard_ExtCharacter** : fundamental type representing the  Unicode character set. It is a 16-bit character type. *ExtCharacter* is  implemented as a *typedef* of the C++ *short* fundamental type. As  such, the ordering and equivalence relations <, <=, ==, !=, >=, >   are defined on extended characters using the order of the UNICODE chart (ex:  A B). 
+* **Standard_CString** : fundamental type representing string  literals. A string literal is a sequence of ASCII (8 bits) characters enclosed  in double quotes. *CString* is implemented as a *typedef* of the C++ *char* fundamental type. 
 * **Standard_Address** : fundamental type representing a generic  pointer. *Address* is implemented as a *typedef* of the C++ *void* fundamental  type. 
-* **Standard_ExtString** is a fundamental type representing string  literals as sequences of Unicode (16 bits) characters. *ExtString* is  implemented as a *typedef* of the C++ *char16_t* fundamental type. 
+* **Standard_ExtString** is a fundamental type representing string  literals as sequences of Unicode (16 bits) characters. *ExtString* is  implemented as a *typedef* of the C++ *short* fundamental type. 

@subsubsection occt_fcug_2_1_2 Types manipulated by value
 There are three categories of types which are manipulated by  value: 
@@ -254,13 +254,13 @@ Objects of classes derived (directly or indirectly) from *Transient*, are normal
 Handle is defined as template class *opencascade::handle<>*.
 Open CASCADE Technology  provides preprocessor macro *Handle()* that is historically used throughout OCCT code to name a handle:
 ~~~~~{.cpp}
-Handle(Geom_Line) aLine; // "Handle(Geom_Line)" is expanded to "opencascade::handle<Geom_Line>"
+Handle(Geom_Line) aLine; // "Handle(Geom_Line)" is expanded to "opencascade::handleL<Geom_Line>"
 ~~~~~

 In addition, for standard OCCT classes additional *typedef* is defined for a handle, as the name of a class prefixed by *Handle_*.
 For instance, the above example can be also coded as:
 ~~~~~{.cpp}
-Handle_Geom_Line aLine; // "Handle_Geom_Line" is typedef to "opencascade::handle<Geom_Line>"
+Handle_Geom_Line aLine; // "Handle_Geom_Line" is typedef to "opencascade::handleL<Geom_Line>"
 ~~~~~

 #### Using a Handle
@@ -593,16 +593,16 @@ The following paragraphs describe recommended approaches for  using exceptions w

 To raise an exception of a definite type method Raise() of  the appropriate exception class shall be used. 
 ~~~~~
-Standard_DomainError::Raise(“Cannot cope with this condition”);
+DomainError::Raise(“Cannot cope with this condition”);
 ~~~~~
-raises an exception of *Standard_DomainError* type with the associated message “Cannot cope with this condition”, the message being optional. This exception may be caught by a handler of a *Standard_DomainError* type as follows: 
+raises an exception of *DomainError* type with the associated  message “Cannot cope with this condition”, the message being optional. This  exception may be caught by a handler of a *DomainError* type as follows: 
 ~~~~~
 try {
  OCC_CATCH_SIGNALS
  // try block
 }
-catch(const Standard_DomainError& ) {
-// handle Standard_DomainError exceptions here
+catch(DomainError) {
+// handle DomainError exceptions here
 }
 ~~~~~

@@ -652,7 +652,8 @@ Using this syntax, the *Value* function becomes:
 ~~~~~
 Item  TCollection_Array1::Value (const Standard_Integer&index) const
     { 
-  Standard_OutOfRange_Raise_if(index < r1 || index > r2, “index out of range in  Array1::Value”);
+  OutOfRange_Raise_if(index < r1 || index > r2,
+                      “index out of range in  Array1::Value”);
  return contents[index];
 }
 ~~~~~
@@ -1681,7 +1682,7 @@ All these functions are provided by geometric processor package <i> gp</i>. Its

 The *gp* package defines the basic geometric entities used for algebraic calculation and basic analytical geometry  in 2d & 3d space. It also provides basic transformations such as identity,  rotation, translation, mirroring, scale transformations, combinations of  transformations, etc. Entities are handled by value.  

-Note that <i> gp</i> curves and surfaces are analytic: there is no parameterization and no orientation on <i>gp</i> entities, i.e. these entities do not provide functions which work with these properties. 
+Please, note that <i> gp</i> curves and surfaces are analytic: there is no parameterization and no orientation on <i>gp</i> entities, i.e. these entities do not provide functions which work with these properties. 

 If you need, you may use more evolved data structures provided by <i> Geom</i> (in 3D space) and <i> Geom2d</i> (in the plane). However, the definition of <i> gp</i> entities is identical to the one of equivalent <i> Geom</i> and <i> Geom2d</i> entities, and they are located in the plane or in space with the same kind of positioning systems. They implicitly contain the orientation, which they express on the <i> Geom </i> and <i> Geom2d </i> entities, and they induce the definition of their parameterization.

--- a/Show More
+++ b/Show More
				`@@ -1 +0,0 @@`
				`#include \"../src/$${OCCT_PACKAGE}/$${OCCT_HEADER}\"`