The reason of current problem lies inside projection algorithm
Function_SetUVBounds() for projection of circle onto sphere produces shifted bounds.
Incorrect checking of placement on summit of the sphere was fixed.
Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface now inherit Standard_Transient.
Interfaces Adaptor2d_HCurve2d, Adaptor3d_HCurve, Adaptor3d_HSurface and their subclasses
are now aliases to Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface.
Removed numerous unsafe reinterpret casts.
Generic classes Adaptor3d_GenHCurve, Adaptor3d_GenHSurface, Adaptor2d_GenHCurve2d have been removed.
Several redundant .lxx files have been merged into .hxx.
Removed obsolete adaptor classes with H suffix.
Approx_ComputeCLine.gxx : new class field is added to manage hang checking.
ProjLib/ProjLib_ComputeApprox.cxx : unset hang checking for analytical surfaces and curves
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
1. Approx_ComputeCLine.gxx, Approx_FitAndDivide.hxx, Approx_FitAndDivide2d.hxx, BRepFill_ComputeCLine.hxx
It is base modification, which allows improve performance of approximation with help of Approx_ComputeCLine. The main idea of improvement is using degree selection by inverse order - from maxdegree to mindegree. If tolerance for maxdegree is not reached, there is no sense to make approximation for current number of knots with lower degree, it is necessary to cut parametric interval.
2. ProjLib_ComputeApprox, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ProjectOnPlane
It is additional modification of methods using Approx_ComputeCLine.
Mainly, modifications concern to more optimal choosing parameters for approximation algorithm.
3. BRepCheck_Face
Small improvement of method Intersect(...), which intersects two wires on face.
4. BRepTopAdaptor_FClass2d
Impovement of treatment infinitely narrow faces.
5. ChFi3d/ChFi3d_Builder_6.cxx
Small improvement, which forbids extension of singular boundary of surface.
It was TODO problem in tests/bugs/modalg_7/bug27711_3
6. IntTools_EdgeEdge.cxx
Improvement of performance for cases of searching common parts between line and analytical curve
7. GeomliteTest_CurveCommands.cxx
Adding Draw command fitcurve. This command is analog of approxcurve, but uses Approx_FitAndDivide algorithm.
Mainly to have direct draw command for testing Approx_ComputeCLine.
8. Extrema_ExtElC.cxx
Treatment of case "infinite solutions" for extrema line-ellipse
9. Modification of some tests according to new behavior of algorithm.
10. tests/perf/moddata/bug30435
Test for new improved algorithm.
11. Implementation QAcommand OCC30435 in QABugs_20.cxx used in test bug30435
Approximation parameters: degmin, degmax, max number of segments, boundary condition, maximal distance of projecting are added in interface of classes ProjLib_ProjectedCurve, ProjLib_ComputeApprox,
ProjLib_ComputeApproxOnPolarSurface
Algorithm of Approx/Approx_ComputeCLine is modified in order to treat maximal number of segments allowed for cutting.
Algorithm of method BOPTools_AlgoTools2D::MakePCurveOnFace(...) is modified in order to manage cases with big edge tolerances.
Test case added
Some test cases were modified according to new behavior of algorithms
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
In ProjLib_ComputeApprox algorithm, compute correct parametric tolerance from the input 3D tolerance using surface resolution, in order to pass it to low-level 2D algorithm Approx_FitAndDivide2d (instantiation of the generic class Approx_ComputeCLine). Earlier 3D tolerance was used as parametric tolerance directly, which was a problem for surfaces with too small radius of curvature.
Also, eliminate redundant creation of the object of type AppParCurves_MultiCurve on each iteration in the method Approx_ComputeCLine::Compute.
The post treatment of the Edge/Edge intersections has been improved. Namely:
a. Making the procedure of sharing Edge/Edge intersection vertices consistent with intersection algorithm by enlarging bounding box of each vertex on half of Precision::Confusion();
b. Algorithm of computation of vertex tolerance (in order to cover tangent zone between Edges) has been changed for Line/Circle cases.
Test cases for issue CR27804
Adjusting test cases according to their new behavior.
Mark the test boolean/volumemaker/A8 as unstable between different versions of MSVS (2010 and 2013).
ProjLib_Cone.cxx - correction wrong calculation of projection line on cone
GeomInt_IntSS_1.cxx - modification of method BuildPCurves(...) - adjusting first or last knots of 2d Curve
ProjLib_ComputeApprox.cxx - modification of method Function_SetUVBounds(...) for case projecting line on cone.
Modification of tests - removing first TODO
Test case for issue #27322
This branch contains fixes for 26675 and 26431 bugs.
1. Normalization has been eliminated.
2. Interfaces of AppDef_Compute::Parametrization(...) and BRepAlgo_BooleanOperations::SetApproxParameters() methods have been changed.
3. Overloaded methods for ApproxInt_Approx::SetParameters(...), TopOpeBRepTool_GeomTool::GetTolerances(...) and TopOpeBRepTool_GeomTool::SetTolerances(...) have been removed (because some fields of these classes are not used more).
4. Comments for some methods have been changed in BRepApprox_TheMultiLineOfApprox.hxx and GeomInt_TheMultiLineOfWLApprox.hxx files.
5. Some fields have been deleted from ApproxInt_MultiLine class. Kept members have become constant.
6. Interface of ksection DRAW-command has been changed.
7. Now, 2dintersect DRAW-command prints information about found segments.
8. Some code fragments have been rewritten to make them easier.
9. Algorithm of splitting WLine, which goes through pole of sphere has been improved.
10. Improve approximation algorithm in order to it will compute correct 2D- and 3D-tangent at the end of bezier constraints (including case when curve goes through or finishes on singular points).
11. Interface of IntPatch_WLine::Dump(...) method has been corrected.
12. Some methods for working with Walking-line are made more universal (available for both GeomInt and IntTools packages).
13. Problem in BRepLib::SameParameter(...) method has been fixed (see corresponding comment).
14. Small correction in Draft package.
15. Any outputs in IntPatch_Intersection::Dump(...) method have become disabled because they are useless. If anybody need in this outputs he/she will correct this method himself/herself.
Adjusting some test cases according to their new behavior.
Creation of new test cases.
----------------------------------------------------------------------------------------------------------------------------
Some explanation of new behavior of some test cases:
1. Regressions:
a) blend simple X4
The problem is described in the issue #0026740. According to this description, the result on the current MASTER seems to be wrong indeed.
b) boolean bcommon_complex C7 and boolean bcut_complex Q1
These test case use same shapes with different Boolean operation (COMMON and CUT). They are already BAD (on the MASTER). Now, some sub-shapes have become not-shared, simply. In my opinion, we shall apply new behavior of these tests.
c) boolean bsection M3
The problem described in the issue #0026777 exists even on the current MASTER.
d) boolean bsection M9
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=26815#c47546. Here, we have really regression in the picture.
e) boolean bsection N2
The problem is described in issue #0026814.
f) boolean volumemaker G1
The problem is described in issue #26020.
g) bugs modalg_1 bug1255 (and bug1255_1)
The problem is described in issue #26815.
h) bugs modalg_2 bug5805_18, bugs modalg_2 bug5805_42, bugs modalg_2 bug5805_46
The problem is described in issue #25925.
i) bugs modalg_3 bug602
The problem is describes in issue #602.
j) bugs modalg_5 bug24915
The problem is described in the message http://tracker.dev.opencascade.org/view.php?id=25929#c48565. It is not fixed by this issue.
k) bugs modalg_5 bug25838
The main reason is described in issue #0026816.
----------------------------------------------------------------------------
2. Improvements:
a) boolean volumemaker F9
b) bugs modalg_1 bug10160_3
c) bugs modalg_2 bug22557
d) bugs modalg_5 bug25319_1 (_2)
e) draft angle G2
f) offset shape A1
g) offset with_intersect_80 N7
Clean-up in code causing warnings when OCCT_DEBUG is enabled
Minor corrections:
- new compiler warnings on VC++ 14
- rename of "PPC" variables that are said to caused conflicts on PowerPC
- removal of unused header TopOpeBRep/TopOpeBRep_tools.hxx
Wrong border 1.0e-9 jump has deleted. Added periodicity information when projecting to surface.
Period "jump" bug fixes.
AppCont_LeastSquare conversion to non cdl class.
AppCont_Function + AppCont_FunctionTool combined in one class providing the same functionality and converted to non cdl.
Testcase modification.
Test cases for issue CR24988
Fixed incorrect comparison.
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
class ProjLib_ComputeApprox
method
ProjLib_ComputeApprox::ProjLib_ComputeApprox
(const Handle(Adaptor3d_HCurve) & C,
const Handle(Adaptor3d_HSurface) & S,
const Standard_Real Tol )
Using Precision::PConfusion() as a 2d tolerance when shifting the projected curve.
Test case for issue CR25223
Includes of Handle*.hxx headers replaced by include of corresponding class (where possible without redesign of the classes).
Minor correction against compiler warning (vc10 64-bit) in BOPAlgo
Remove double header inclusions
Correction of minor mistake
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
- enumeration value not handled in switch in Aspect_ColorScale.cxx, TNaming_DeltaOnModification.cxx
- comparison between signed and unsigned integer expressions in NIS_Triangulated.cxx, OSD_MAllocHook.cxx, RWStl.cxx
- static function defined or declared but not used in OpenGl_Workspace_2.cxx, ProjLib_ComputeApprox.cxx
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
Removing pPotentially uninitialized local variable
Got rid of most of warnings C4701: Potentially uninitialized local variable
Removed redundant variable definitions.
Refactored a part of AppParCurves_ResolConstraint CTOR.
Replaced 0. to Precision::Confusion for tolerance vars;
Changed values for min and max parameter vars;
Got rid of redundant variables' initialization.
