1. Correct building history: the case of closed spine.
2. Rollback method GeomFill_CorrectedFrenet::InitInterval - correct processing singularities on spine.
3. Correct test cases.
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
BRepFill_TrimShellCorner::CheckAndOrientEdges() - When orienting next edge in a sequence take into account the Orientation of the previous edge.
Test cases for the issue.
The capabilities of the class BRepOffsetAPI_MakeEvolved have been extended with involving alternate algorithm of resolving the loops in the piped shape. The new option theIsVolume is added for that in the constructor.
New class BRepFill_AdvancedEvolved has been created in order to provide new OCCT-algorithm combining BRepFill_PipeShell and BOPAlgo_MakerVolume.
A change in BOPAlgo_PaveFiller.cxx has been made in order to solve a specific problem of Boolean operation.
The interface of DRAW-command "evolved" has been updated to add the new option. DRAW-command "evolvedsolid" has been deleted. Now it is replaced with DRAW-command "evolved" with the option "-solid".
Testgrid "evolved" has been created.
1. Approx_ComputeCLine.gxx, Approx_FitAndDivide.hxx, Approx_FitAndDivide2d.hxx, BRepFill_ComputeCLine.hxx
It is base modification, which allows improve performance of approximation with help of Approx_ComputeCLine. The main idea of improvement is using degree selection by inverse order - from maxdegree to mindegree. If tolerance for maxdegree is not reached, there is no sense to make approximation for current number of knots with lower degree, it is necessary to cut parametric interval.
2. ProjLib_ComputeApprox, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ProjectOnPlane
It is additional modification of methods using Approx_ComputeCLine.
Mainly, modifications concern to more optimal choosing parameters for approximation algorithm.
3. BRepCheck_Face
Small improvement of method Intersect(...), which intersects two wires on face.
4. BRepTopAdaptor_FClass2d
Impovement of treatment infinitely narrow faces.
5. ChFi3d/ChFi3d_Builder_6.cxx
Small improvement, which forbids extension of singular boundary of surface.
It was TODO problem in tests/bugs/modalg_7/bug27711_3
6. IntTools_EdgeEdge.cxx
Improvement of performance for cases of searching common parts between line and analytical curve
7. GeomliteTest_CurveCommands.cxx
Adding Draw command fitcurve. This command is analog of approxcurve, but uses Approx_FitAndDivide algorithm.
Mainly to have direct draw command for testing Approx_ComputeCLine.
8. Extrema_ExtElC.cxx
Treatment of case "infinite solutions" for extrema line-ellipse
9. Modification of some tests according to new behavior of algorithm.
10. tests/perf/moddata/bug30435
Test for new improved algorithm.
11. Implementation QAcommand OCC30435 in QABugs_20.cxx used in test bug30435
Added missing NULL and empty result checks.
Updated test cases using offset_wire_092.brep shape containing all Edges
with TopAbs_INTERNAL orientation (hense no boundary to make offset).
Replacing usage of BRepAlgo_DSAccess with usage of modern Boolean operations algorithms in BRepFill_Draft.
Removing BRepAlgo_BooleanOperations and BRepAlgo_DSAccess classes.
The following classes have been removed as unused:
* BRepAlgo_DataMapOfShapeBoolean
* BRepAlgo_DataMapOfShapeInterference
* BRepAlgo_EdgeConnector
* BRepAlgo_SequenceOfSequenceOfInteger
Add history for subshapes of spine: edges and vertices. Each edge of spine generates a shell. Each vertex of spine generates a set of edges and, possibly, faces (in the case of Round Corner).
TopoDS_Shape::NbChildren() - new method has been introduced.
TopoDS_Shape.lxx, TopoDS_TShape.lxx - inline methods have been moved to hxx.
TopoDS_TShape_Flags has been redeclared as enumeration instead of preprocessor macros.
Cyclic dependency between headers TopoDS_Shape.hxx and TopoDS_TShape.hxx eliminated.
Places where TopoDS_Iterator is used only for calculation of number of sub-shapes are updated to use NbChildren() instead
1. Sphere is not V-periodic surface. See the section "Periodicity concept" written in frame of the fix 0029115. Therefore, applying ElCLib::AdjustPeriodic(...) method is unreasonable.
2. Default U work range of sphere is 0 ... 2*PI. Therefore, adjusting U parameter in range -PI/2 ... +PI/2 is unreasonable.
Implementation of the mechanism for unification of the history commands for all OCCT algorithms.
The following Draw commands should be used to track the history of shapes modifications of any operation:
- modified - to find the shapes modified from the given shape in the given history.
- generated - to find the shapes generated from the given shape in the given history.
- isdeleted - to check if the given shape has been deleted during operation.
The mechanism allows fast & easy enabling of the DRAW history support for the algorithms supporting the history on the API level (i.e. the algorithm should have the methods Modified(), Generated() and IsDeleted()).
To enable the draw history support it is necessary to store the history of the algorithm into the session. For instance:
TopTools_ListOfShape Objects = ...; // Objects
TopTools_ListOfShape Tools = ...; // Tools
BRepAlgoAPI_Cut aCut(Objects, Tools); // Boolean cut operation
BRepTest_Objects::SetHistory(Objects, aCut); // Store the history for the Objects (overwrites the history in the session)
BRepTest_Objects::AddHistory(Tools, aCut); // Add the history for the Tools
To get the stored history in draw the command "savehistory" should be used. It saves the history kept in session into a Drawable object with the given name:
# perform cut
bcut r s1 s2
# save history of cut
savehistory cut_history
explode s1 f
modified m cut_history s1_1
The Draw History commands of the following algorithms have been removed:
- Boolean Operations;
- Defeaturing;
- Unify same domain;
- Sweep;
- Thrusections;
All these algorithms have been switched to support the new Draw history mechanism.
The Fillet and Blend algorithms have been also enabled to support history commands.
BRepFill_Sweep algorithm is improved to handle cases when generated revolution surface has degenerated point in the middle.
Added test bugs modalg_7 bug29663
TODO added in test bugs modalg_1 bug1477_11: here two additional self-intersecting faces are now created, previously missing from the result.
Before the fix, BRepAdaptor_CompCurve considered the input wire to be periodic with period LastParameter()-FirstParameter().
Now, method IsPeriodic will always return FALSE because it is impossible to obtain correspondence between the members of BRepAdaptor_CompCurve class and its periodicity status.
New behavior has been documented in upgrade-guide.
1. The package BOPCol has been fully removed:
- *BOPCol_BaseAllocator* is replaced with *Handle(NCollection_BaseAllocator)*;
- *BOPCol_BoxBndTree* is replaced with *BOPTools_BoxBndTree*;
- *BOPCol_Box2DBndTree* is removed as unused;
- *BOPCol_DataMapOfIntegerInteger* is replaced with *TColStd_DataMapOfIntegerInteger*;
- *BOPCol_DataMapOfIntegerListOfInteger* is replaced with *TColStd_DataMapOfIntegerListOfInteger*;
- *BOPCol_DataMapOfIntegerListOfShape* is replaced with *TopTools_DataMapOfIntegerListOfShape*;
- *BOPCol_DataMapOfIntegerMapOfInteger.hxx* is removed as unused;
- *BOPCol_DataMapOfIntegerReal* is replaced with *TColStd_DataMapOfIntegerReal*;
- *BOPCol_DataMapOfIntegerShape* is replaced with *TopTools_DataMapOfIntegerShape*;
- *BOPCol_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
- *BOPCol_DataMapOfShapeInteger* is replaced with *TopTools_DataMapOfShapeInteger*;
- *BOPCol_DataMapOfShapeListOfShape* is replaced with *TopTools_DataMapOfShapeListOfShape*;
- *BOPCol_DataMapOfShapeReal* is replaced with *TopTools_DataMapOfShapeReal*;
- *BOPCol_DataMapOfShapeShape* is replaced with *TopTools_DataMapOfShapeShape*;
- *BOPCol_DataMapOfTransientAddress* is removed as unused;
- *BOPCol_IndexedDataMapOfIntegerListOfInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeBox* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeListOfShape* is replaced with *TopTools_IndexedDataMapOfShapeListOfShape*;
- *BOPCol_IndexedDataMapOfShapeReal* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeShape* is replaced with *TopTools_IndexedDataMapOfShapeShape*;
- *BOPCol_IndexedMapOfInteger* is replaced with *TColStd_IndexedMapOfInteger*;
- *BOPCol_IndexedMapOfOrientedShape* is replaced with *TopTools_IndexedMapOfOrientedShape*;
- *BOPCol_IndexedMapOfShape* is replaced with *TopTools_IndexedMapOfShape*;
- *BOPCol_ListOfInteger* is replaced with *TColStd_ListOfInteger*;
- *BOPCol_ListOfListOfShape* is replaced with *TopTools_ListOfListOfShape*;
- *BOPCol_ListOfShape* is replaced with *TopTools_ListOfShape*;
- *BOPCol_MapOfInteger* is replaced with *TColStd_MapOfInteger*;
- *BOPCol_MapOfOrientedShape* is replaced with *TopTools_MapOfOrientedShape*;
- *BOPCol_MapOfShape* is replaced with *TopTools_MapOfShape*;
- *BOPCol_PListOfInteger* is removed as unused;
- *BOPCol_PInteger* is removed as unused
- *BOPCol_SequenceOfPnt2d* is replaced with *TColgp_SequenceOfPnt2d*;
- *BOPCol_SequenceOfReal* is replaced with *TColStd_SequenceOfReal*;
- *BOPCol_SequenceOfShape* is replaced with *TopTools_SequenceOfShape*;
- *BOPCol_Parallel* is replaced with *BOPTools_Parallel*;
- *BOPCol_NCVector* is replaced with *NCollection_Vector*;
2. The class *BOPDS_PassKey* and containers for it have been removed as unused;
3. The unused containers from *IntTools* package have been removed:
- *IntTools_DataMapOfShapeAddress* is removed as unused;
- *IntTools_IndexedDataMapOfTransientAddress* is removed as unused;
4. The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
5. The class *BOPTools* has been removed as duplicate of the class *TopExp*;
1.The algorithm searching the section in the corner (ChooseSection) is modified to be able to find simple cases with rather big tolerance.
2. The constructor of BRepFill_Section is modified: now it removes locations in the shape of section like it was done in BRepFill_Pipe.
3. Correction of U-edges by Same Parameter has been added to the method BRepFill_Sweep::Build.
Approximation parameters: degmin, degmax, max number of segments, boundary condition, maximal distance of projecting are added in interface of classes ProjLib_ProjectedCurve, ProjLib_ComputeApprox,
ProjLib_ComputeApproxOnPolarSurface
Algorithm of Approx/Approx_ComputeCLine is modified in order to treat maximal number of segments allowed for cutting.
Algorithm of method BOPTools_AlgoTools2D::MakePCurveOnFace(...) is modified in order to manage cases with big edge tolerances.
Test case added
Some test cases were modified according to new behavior of algorithms
0. Basic tools for defining classes representing alerts (errors, warnings etc.) and collecting them during execution of algorithms are added in Message package.
1. Refactoring of the Error/Warning reporting system of the algorithms in Boolean Component.
To dump the description of the Error/Warning status of the algorithm the DumpErrors/DumpWarnings method should be called.
Also, the methods GerErrorMsg(int Error) and GetWarningMsg(int Warning) have been implemented to get the description for the given Error/Warning.
All Error/Warning statuses are now listed in the enumeration ErrorStatusEnum/WarningStatusEnum of the algorithm.
It is also possible to get the shapes for which the warning has been set by using the method GetWarningShapes().
2. The new class BOPAlgo_Options has been created to unify the options of the BOPAlgo_* and BRepAlgoAPI* algorithms.
3. The new checks across the algorithms have been added to detect and report errors and warnings.
4. Test cases
boolean bopcut_complex B9 E1 E5 E8
boolean bopfuse_complex B4 B5 C9 D1 D4 D5 D6 D7
have been rewritten to use Cells Builder algorithm instead of Boolean Operations algorithm, because latter always returns error "Unsupported Boolean operation" for these cases.
5. New chapter has been added in the user guide for Boolean Operations - Error / Warning reporting system.
6. Added comment to NCollection_List::Remove(Iterator&)
Get rid of iterations on maps with shape key by replacing simple maps with indexed maps. So iteration is done on integer key.
The map containers have been updated to insert into them type definitions of key and value.
The new methods RemoveKey() and RemoveFromIndex() have been added to indexed [data] map to be able to remove an arbitrary key from the map.
All the code in OCCT has been updated where RemoveLast() and Substitute() methods were used to remove a key from indexed [data] map.
1. Clearance of fields of class has been added to the method BRepFill_PipeShell::Prepare().
2. Calculation of error on surfaces has been corrected in the method GeomFill_Sweep::BuildKPart().
3. New Draw command "errorsweep" has been added to check the error reached on the surfaces built by BRepOffsetAPI_MakePipeShell algorithm.
Virtual method Generated is redefined. Now it returns:
- chain of generated faces for sub-edge of a profile;
- chain of generated edges for sub-vertex of a profile;
- bunch of chains of generated edges for start or end vertex if it is degenerated section.
Correction according to the remarks.
Fix compiler's warnings and add 4 new test cases.
Correction of mistake.
Compilation warnings are gone.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
The method BRepOffsetAPI_MakePipeShell::Generated now returns generated shapes for sub-edges and sub-vertices of sections.
The method BRepFill_PipeShell::BuildHistory is redesigned: now it builds generated shapes for sub-edges and sub-vertices of sections.
New Draw command "gensweep" is added to sweep commands for testing of history building.
The reason of exception has been eliminated.
Creation of the test case for this issue.
Correction of unstable test case.
Some test cases have been adjusted according to their new behavior.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
Method DownCast() is made template, to be available only when argument is actually a pointer or handle to a base class.
For compatibility with existing code, method DownCast() that can be used for the same type, derived, or unrelated class (i.e. where there is no actual down casting) is still available, its use shall cause "deprecated" compiler warning.
OCCT code is updated to remove meaningless DownCast()s; a few places where DownCast() was used with argument of unrelated type are corrected.
DRAW command QAHandleCast is removed (it was useful only during redesign of handles).
Virtual method Generated() inherited from BRepPrimAPI_MakeSweep is overridden in class BRepOffsetAPI_MakePipe, providing information on shapes generated from the profile.
Implementation of virtual functions is made more consistent in places where warning was issued:
- Missing implementation of virtual method Closed() added in classes inheriting Intf_Polygon2d
- Empty implementation of virtual method Read() accepting stream is moved from PCDM_RetrievalDriver to StdLDrivers_DocumentRetrievalDriver
- Method BRepFill::Delete() is renamed to DeleteProfile() to avoid confusion with method Delete() inherited from MMgt_TShared
- Virtual method AIS_Dimenaion::ComputePlane() is removed from base class; each dimension defines and uses its own method with the same name (but different arguments)
- Inherited virtual method Dump() with single argument in class XCAFDoc_ShapeTool is now defined as short-cut to own method Dump(), also calling parent's one
- Inherited virtual method BoundingBox(void) is made visible in AIS_Shape
- Inherited virtual method Box(void) is made visible in classes inheriting BVH_PrimitiveSet
* Implement GeomEvaluator package
* Inject evaluators to GeomAdaptor_Surface to calculate values of complex surfaces
* Inject evaluators to Geom_Surface classes to calculate values for offset surfaces, surfaces of revolution and surfaces of extrusion
* Move Adaptor3d_SurfaceOfLinearExtrusion and Adaptor3d_SurfaceOfRevolution to GeomAdaptor and unify calculation of their values and derivatives
* Code optimizations
* Update test cases
Update of test-cases according to the new behavior
