Added condition to not remove face image, consisting only of invalid edges for artifactically invalid face.
This face image should be connected with other image faces minimum through the edge.
BRepOffset_MakeOffset.cxx - tolerance control for building planar faces is implemented,
updating tolerance for initial entities is avoided
BRepAlgo_Loop.cxx - "total" setting tolerance 0.001 is removing
BRepLib.cxx - checking of "locked" for vertex is removing in static function UpdShTol
QABugs_20.cxx - add new command OCC26441 for checking tolerance differenses between two "identical" shapes
tests/bugs/modalg_7/bug30054 - case now is "BAD", because really result shape is invalid: many faces has not closed wires with huge gaps between ends of edges. Result was "OK" only because tolerances of vertices were increased by algorithm to cover all gaps.
tests/bugs/modalg_8/bug26441 - new test case added
Other test: B3, C8, A7, C8: they were "BAD" and now are "BAD", only some problems are changed.
GeomLib_IsPlanarSurface.cxx - using poles for checking BSpline, Bezier curves and surface changed
on checking by curve, surface points.
BRepOffset_MakeOffset.cxx - set normal of plane surface according to normal of initial face surface
tests/cr/bugs/bug33170 - new test case added
Add more faces for intersection in rebuilding process basing on the connection of the splits of offset faces (special treatment for the artificially invalid faces).
When rebuilding faces add vertices common for faces for trimming the new intersection edges.
Adjust existing and create new test cases.
Before removal of the part make sure that it was not filled due to overlapping of opposite parts.
Improve procedure of checking for inverted edges by taking into account that the original edges may not be connected.
Correct test case offset/shape_type_i_c/YL5, as it was working incorrectly - some parts were missing.
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
Refactoring of the BRepOffset_MakeOffset_1.cxx - Introduce local class BRepOffset_BuildOffsetFaces to compute splits of offset faces.
Change of tests is caused by the correction of the misprint in the code (incorrect input parameter for CheckEdgesCreatedByVertex method).
Add new class BRepLib_ValidateEdge to use for edge checking instead of functions:
- Validate() from BOPTools_AlgoTools.cxx
- Validate() from BRepCheck_Edge.cxx
- ShapeAnalysis_Edge::ComputeDeviation()
Multiple changes in BRepOffset_MakeOffset algorithm:
- correct fusing vertices;
- correct building intersection edges;
- correct intersecting new edges in 2D;
- correct building wire on a new face;
- correct building history.
Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface now inherit Standard_Transient.
Interfaces Adaptor2d_HCurve2d, Adaptor3d_HCurve, Adaptor3d_HSurface and their subclasses
are now aliases to Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface.
Removed numerous unsafe reinterpret casts.
Generic classes Adaptor3d_GenHCurve, Adaptor3d_GenHSurface, Adaptor2d_GenHCurve2d have been removed.
Several redundant .lxx files have been merged into .hxx.
Removed obsolete adaptor classes with H suffix.
Set safe exit status for:
Standard_NullObject exception,
Standard_NullObject: BRep_Tool:: TopoDS_Vertex hasn't gp_Pnt,
BRep_Tool: no parameter on edge,
BRepOffset_MakeOffset::TrimEdge no projection
Do not classify edges originated from combination of edges and vertices as the classification will likely be unstable.
Mark faces containing valid inverted edges as invalid but do not remove them from valid splits.
Extend the debug command DBRep_SetComp to allow different containers for creating the TopoDS_Compound.
Extrema_ExtCs.cxx: number of subdivision is incresed for curve;
Modifications to fix regressions of some tests
IntTools_BeanFaceIntersector.cxx: restriction of curve, which is used in Extrema_ExtCS
ProjLib_CompProjectedCurve.cxx: tolerance is reduced for Extrema_ExtCS
BRepOffset_Tool.cxx: checking common vertex if it is Null
tests/bugs/modalg_7/bug27087 : test case added.
tests/bugs/modalg_5/bug25232_8 : test is modified according to new behavior of algorithms
Extend the Offset operation (Join Type "Intersection", mode "Complete") to allow different offset values on adjacent co-planar faces.
The gap between adjacent faces is closed by creating artificial face perpendicular to the face.
Adding test cases.
Method BRepOffset::Surface() is used in simple offset algorithm to create offset surface, instead of direct and unconditional construction of new Geom_OffsetSurface instance.
Added test bugs modalg_7 bug29334
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
1. Rewrite the method BRepTools::DetectClosedness.
2. Correct the method BRepOffset_Tool::EnLargeFace to process properly non-periodic but closed faces.
The fix is intended to obtain the correct result of offset operation in which the result contained only the small inverse part of the shape, which clearly should not have been included in the result at all.
The fix adds treatment of the inverted edges while removing the inside faces (collapsed ones) - RemoveInsideFaces method:
- Removing the invalid hanging blocks containing the inverted edges.
- Considering the face containing the inverted edges as the invalid one.
Test cases for the issue.
The following changes have been made for improving the offset algorithm:
1. Multi-connexity support - intersection of the faces connected to the edge belonging to more than two faces is now performed.
2. Avoid intersection of the faces connected through internal edge.
3. Filling gaps (holes) in the splits of the created offset faces to increase possibility of creation of the closed volume from these splits.
Test cases for the issue.
TopoDS_Shape::NbChildren() - new method has been introduced.
TopoDS_Shape.lxx, TopoDS_TShape.lxx - inline methods have been moved to hxx.
TopoDS_TShape_Flags has been redeclared as enumeration instead of preprocessor macros.
Cyclic dependency between headers TopoDS_Shape.hxx and TopoDS_TShape.hxx eliminated.
Places where TopoDS_Iterator is used only for calculation of number of sub-shapes are updated to use NbChildren() instead
- Add the flag ExtensionMode in the method BRepOffset_Tool::EnLargeFace, defining the mode of extension of the surface of the face. Old behavior is to be remained the default one.
- Fix wrong building of extended face on a closed surface. Now, if the face is closed in U direction (like cylinder) but the seam edge is shifted from 0 position, the resulting extended face has properly connected seam edge.
- Add new public static method BRepTools::DetectClosedness(), which checks whether a face is closed in U and V directions.
1. Method BRepOffset_Tool::Inter3D is modified: now selection of proper edges is performed here, they are not concatenated into one edge if they go through a vertex on a boundary.
2. Method BRepOffset_Inter3d::ConnexIntByInt is modified: selection of edges is eliminated.
3. Method BRepOffset_Inter2d::ConnexIntByInt is corrected to be able to process seam edges correct.
Prevent modification of the input shapes in destructive mode in case their sub-shapes have not been modified:
1. Prevent edge splitting for the pave blocks with old vertices if it is possible to use the existing edge (*BOPAlgo_PaveFiller::MakeSplitEdges*);
2. Prevent creation of the new containers (WIRES/SHELLS/COMPSOLIDS) if non of its parts have been modified (*BOPAlgo_Builder::FillImagesContainer*);
3. Prevent creation of the new face if non of its wires have been modified (*BOPAlgo_Builder::FillImagesFaces*);
4. If possible, use the original face to be the representative for the group of SD faces (*BOPAlgo_Builder::FillSameDomainFaces*).
Cosmetic changes:
1. Documentation of the *BOPAlgo_Builder* class.
2. Making simple methods of the *BOPAlgo_Builder* class inline.
3. Getting rid of the *BOPAlgo_Builder::mySplits* field as it is excessive. *BOPAlgo_Builder::myImages* can be used instead.
3. Moving the Check Inverted option from *BOPAlgo_Options* to *BOPAlgo_Builder*.
Test cases for the issue.
Adjustment of the test case to their current behavior.
Test case *blend/complex/H2* has been deleted as duplicate of the test case *blend/simple/Z1*.
1. The package BOPCol has been fully removed:
- *BOPCol_BaseAllocator* is replaced with *Handle(NCollection_BaseAllocator)*;
- *BOPCol_BoxBndTree* is replaced with *BOPTools_BoxBndTree*;
- *BOPCol_Box2DBndTree* is removed as unused;
- *BOPCol_DataMapOfIntegerInteger* is replaced with *TColStd_DataMapOfIntegerInteger*;
- *BOPCol_DataMapOfIntegerListOfInteger* is replaced with *TColStd_DataMapOfIntegerListOfInteger*;
- *BOPCol_DataMapOfIntegerListOfShape* is replaced with *TopTools_DataMapOfIntegerListOfShape*;
- *BOPCol_DataMapOfIntegerMapOfInteger.hxx* is removed as unused;
- *BOPCol_DataMapOfIntegerReal* is replaced with *TColStd_DataMapOfIntegerReal*;
- *BOPCol_DataMapOfIntegerShape* is replaced with *TopTools_DataMapOfIntegerShape*;
- *BOPCol_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
- *BOPCol_DataMapOfShapeInteger* is replaced with *TopTools_DataMapOfShapeInteger*;
- *BOPCol_DataMapOfShapeListOfShape* is replaced with *TopTools_DataMapOfShapeListOfShape*;
- *BOPCol_DataMapOfShapeReal* is replaced with *TopTools_DataMapOfShapeReal*;
- *BOPCol_DataMapOfShapeShape* is replaced with *TopTools_DataMapOfShapeShape*;
- *BOPCol_DataMapOfTransientAddress* is removed as unused;
- *BOPCol_IndexedDataMapOfIntegerListOfInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeBox* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeInteger* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeListOfShape* is replaced with *TopTools_IndexedDataMapOfShapeListOfShape*;
- *BOPCol_IndexedDataMapOfShapeReal* is removed as unused;
- *BOPCol_IndexedDataMapOfShapeShape* is replaced with *TopTools_IndexedDataMapOfShapeShape*;
- *BOPCol_IndexedMapOfInteger* is replaced with *TColStd_IndexedMapOfInteger*;
- *BOPCol_IndexedMapOfOrientedShape* is replaced with *TopTools_IndexedMapOfOrientedShape*;
- *BOPCol_IndexedMapOfShape* is replaced with *TopTools_IndexedMapOfShape*;
- *BOPCol_ListOfInteger* is replaced with *TColStd_ListOfInteger*;
- *BOPCol_ListOfListOfShape* is replaced with *TopTools_ListOfListOfShape*;
- *BOPCol_ListOfShape* is replaced with *TopTools_ListOfShape*;
- *BOPCol_MapOfInteger* is replaced with *TColStd_MapOfInteger*;
- *BOPCol_MapOfOrientedShape* is replaced with *TopTools_MapOfOrientedShape*;
- *BOPCol_MapOfShape* is replaced with *TopTools_MapOfShape*;
- *BOPCol_PListOfInteger* is removed as unused;
- *BOPCol_PInteger* is removed as unused
- *BOPCol_SequenceOfPnt2d* is replaced with *TColgp_SequenceOfPnt2d*;
- *BOPCol_SequenceOfReal* is replaced with *TColStd_SequenceOfReal*;
- *BOPCol_SequenceOfShape* is replaced with *TopTools_SequenceOfShape*;
- *BOPCol_Parallel* is replaced with *BOPTools_Parallel*;
- *BOPCol_NCVector* is replaced with *NCollection_Vector*;
2. The class *BOPDS_PassKey* and containers for it have been removed as unused;
3. The unused containers from *IntTools* package have been removed:
- *IntTools_DataMapOfShapeAddress* is removed as unused;
- *IntTools_IndexedDataMapOfTransientAddress* is removed as unused;
4. The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
5. The class *BOPTools* has been removed as duplicate of the class *TopExp*;
Disable additional intersection of the splits of offset faces implemented in method BRepOffset_MakeOffset::Intersection3D() for the mode "Complete" and join type "Intersection".
This method is insufficient, as it does not allow to detect the tangential faces, necessary for this mode.
Intersection is performed in the method BuildShellsCompleteInter() developed for this mode.
This patch turns off some not needed modes of fix in the called ShapeFix_Face algorithm.
It stores pcurves on planes in the edges to avoid repeated computation of the same pcurves many times (it is done only when SafeInputMode is false).
It avoids unnecessary replace/apply actions in the modification context.
It removes the code that makes decomposition of surface of the face on several faces.
The new command buildpcurvesonplane has been added, which builds and stores pcurves of edges on planar faces. This is useful for investigations how presence of pcurves on planes influence performance of algorithms.
Make drawing of dimension line in snowflake test independent on the order of vertices in the result.
The following improvements have been made in the 3D offset algorithm for mode "Complete" and Join type "Intersection":
- RemoveInsideFaces() - Removal of the invalid parts outside of the solids built from the splits of offset faces is now performed. It helps to avoid their rebuilding and speed-up the computation.
- FindVerticesToAvoid() - Strengthening the criteria for the vertices to be avoided in the new splits.
Test cases for the issue.
Adjustment of the test cases to current behavior.
UpdateValidEdges in BRepOffset_MakeOffset_1 - Perform the filtering of splits of the edges in two stages:
1. Separate filtering of the connected blocks using localized bounding edges taken only from the splits of offset faces from the block;
2. Combined treatment of the remaining splits using bounding edges from the splits of all offset faces.
