Approx/Approx_SameParameter.cxx,hxx:
Class Approx_SameParameter refactoring. Logic is changed in many places to unify usage, simplify maintenance.
Method Curve2d() is changed to return Geom2d_Curve instead of Geom2d_BSplineCurve. Corresponding message is added to the upgrade guide.
.lxx file is merged into .hxx.
Tangent computation is extracted into special method.
Comparing number of sample points after CheckSameParameter(...) is added to define cases with projection fails.
Undesirable behavior when curves are not same parameterized is fixed.
Geom2dAdaptor/Geom2dAdaptor.cxx: treatment of offset curve is added
Adaptor3d/Adaptor3d_TopolTool.cxx: minor improvement of performance for BSpline surfaces with huge number of knots
Tests were modified according to new behavior of sameparameter algorithm
1. Add method TransformPCurves to ShapeUpgrade_UnifySameDomain - to rotate and translate existing pcurves instead of projecting.
2. Modify method ShapeUpgrade_UnifySameDomain::IntUnifyFaces - now it does not apply ShapeFix to new wires and new faces.
3. In the method UnifyEdges: add merging degenerated edges.
The method *BRepTools::UpdateFaceUVPoints* has been modified to resets the UV points of the edge to the bounding points of the parametric curve of the edge on the face.
Test cases for the issue.
Adjust test cases heal split_angle_advanced ZC3, ZE6, ZE9 for current behavior as they show less faulty shapes now.
Adjust test case bugs modalg_6 bug21246 as it works correctly now.
Implementation of the mechanism for unification of the history commands for all OCCT algorithms.
The following Draw commands should be used to track the history of shapes modifications of any operation:
- modified - to find the shapes modified from the given shape in the given history.
- generated - to find the shapes generated from the given shape in the given history.
- isdeleted - to check if the given shape has been deleted during operation.
The mechanism allows fast & easy enabling of the DRAW history support for the algorithms supporting the history on the API level (i.e. the algorithm should have the methods Modified(), Generated() and IsDeleted()).
To enable the draw history support it is necessary to store the history of the algorithm into the session. For instance:
TopTools_ListOfShape Objects = ...; // Objects
TopTools_ListOfShape Tools = ...; // Tools
BRepAlgoAPI_Cut aCut(Objects, Tools); // Boolean cut operation
BRepTest_Objects::SetHistory(Objects, aCut); // Store the history for the Objects (overwrites the history in the session)
BRepTest_Objects::AddHistory(Tools, aCut); // Add the history for the Tools
To get the stored history in draw the command "savehistory" should be used. It saves the history kept in session into a Drawable object with the given name:
# perform cut
bcut r s1 s2
# save history of cut
savehistory cut_history
explode s1 f
modified m cut_history s1_1
The Draw History commands of the following algorithms have been removed:
- Boolean Operations;
- Defeaturing;
- Unify same domain;
- Sweep;
- Thrusections;
All these algorithms have been switched to support the new Draw history mechanism.
The Fillet and Blend algorithms have been also enabled to support history commands.
Test parse rules are improved to recognize messages with word 'fail' or 'failure' as errors.
Test cases are corrected accordingly (TODO or REQUIRED statements added where fail messages were not noticed previously).
This patch turns off some not needed modes of fix in the called ShapeFix_Face algorithm.
It stores pcurves on planes in the edges to avoid repeated computation of the same pcurves many times (it is done only when SafeInputMode is false).
It avoids unnecessary replace/apply actions in the modification context.
It removes the code that makes decomposition of surface of the face on several faces.
The new command buildpcurvesonplane has been added, which builds and stores pcurves of edges on planar faces. This is useful for investigations how presence of pcurves on planes influence performance of algorithms.
Make drawing of dimension line in snowflake test independent on the order of vertices in the result.
Synchronization of the ShapeAnalysis_Edge behavior with the BRepCheck_Edge by adding check for 2d curves on planes.
Implementation of the BRep_Tool::CurveOnPlane method to avoid code duplication for making PCurve of the edge on planar face.
'BRepTools_History' history was implemented for algorithm
'ShapeUpgrade_UnifySameDomain'.
The history of the changing of the initial shape was corrected to consider all
shapes created by the algorithm as modified shapes instead of generated ones.
The old history interface was replaced by the new one:
- to get the modified shapes use: History()->Modified();
- to check if the shapes has been deleted use: History()->IsRemoved().
- The option SafeInputMode has been added in the class ShapeUpgrade_UnifySameDomain. If it is set then the input shape is protected against modifications of any aspects of its sub-shapes. Default value is true.
- The option "-nosafe" has been added in draw command "unifysamedom". If it is not set the algorithm is run with SafeInputMode switched off.
1) BRepLib::UpdateTolerances(..) & BRepLib::SameParameter(..) functions now support non-mutable input feature. reshaper is used to store modified copies of subshapes of original (input) shape(s) as substitutions.
2) IsNewShape(..) method has been added to BRepTools_ReShape to check if the given shape has been recorded as a value
- The methods "Modified" and "IsDeleted" have been added for history support in "ShapeUpgrade_UnifySameDomain" class.
- The new Draw commands "unifysamedommod" and "unifysamedomisdel" have been added.
- Adoption of other algorithms using this one to its new behavior.
Removing code duplication
Correcting regressions
Correcting remarks
Interpolation state check is fixed to mark as valid only ordered sequences of poles.
Refactoring of Approx_SameParameter.cxx.
Test case is added.
Test cases are updated to the new behavior.
Update of testing cases
Add check on empty topological containers.
Add empty shapes to the replacement map.
Add Draw command for Re-Shape.
Add a test grid for reshape with a single use case for starters.
Upgrade check of closeness of 2dcurve to line during projection:
For C1 and more surfaces check distance to normal, not to surface, for C0 surfaces update tolerance formula.
Add check for possible period jump in some inner point.
Update some test cases.
Add cache saving for lines,
update fixPeriodicTroubles() function, using parameters from cashe.
Small correction of test cases for issue #26930
fix processing of points from cache.
Update of test cases according to the new behavior
Fix behavior of fixPeriodicityTroubles() on different isolines,
fix copy/paste mistake.
Update test cases:
iges_2 C4 - return to master values
step_3 E6 - improvement.
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Projection is considered as done only if parameter projected point falls within the current interval of parameters.
In the Approx_SameParameter considering tolerance after static method ProjectPointOnCurve was added.
In BRepAlgoAPI_Sewing catch of exception was added and computation of tolerance of edge if same parameter was changed in according to check in BRepCheck_Analyzer
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Modification in order to avoid warning
Test case for issue CR24357
A tool to remove tails from the wires of a shape was created.
The tool is based on mechanism 'ShapeFix',
is located in types 'ShapeFix_Wire' and 'ShapeAnalysis_Wire',
is enabled through method 'ShapeFix_Wire::FixTailMode' and
is initialized by methods 'ShapeFix_Wire::SetMaxTailAngle' and 'ShapeFix_Wire::SetMaxTailWidth' and
is called through method 'ShapeFix_Wire::FixTails'.
The status of any performing of the last method is accessible through method 'ShapeFix_Wire::StatusFixTails'.
The tail angle is checked only at the tail start.
Mechanism 'ShapeFix' was modified:
- the tool is disabled by default;
- algorithm 'Fix notched edges' is disabled then the tool is enabled;
- the tool and the last algorithm work in turns then the tool works on the request.
'Draw' command 'fixshape' was extended by options '-maxtaila' and '-maxtailw' to test the tool.
'Draw' tests to test the tool were created.
Algorithm 'fixshape' was changed in type 'ShapeProcess_OperLibrary' to
- use new parameters named 'FixTailMode', 'MaxTailAngle' (in degrees) and 'MaxTailWidth' from the algorithm context;
- apply the tool after the shape will be fully fixed if the tool was enabled.
Place holders for the new parameters were created in the resource file of mechsnism 'STEPControl_Reader'.
Test cases for issue CR26261
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
1. Unification of the polygons creation (it is regardless of arguments order).
2. Output of 2dintersect DRAW-command was changed.
3. Geom2dGcc_Circ2d2TanRadGeo.cxx:
Precise intersection point found by Extrema Curve-Curve method (dot product between every tangent vector and vector between points on two curves must be equal to zero).
4. Some comments have been translated from French to English.
Some test case have been updated.
Changes in accordance with the last remark
Test case for issue CR25593
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
1. New status "BRepCheck_InvalidPolygonOnTriangulation" is added.
2. Small correction of output of "checkshape" command result.
Test cases were changed.
Test case for issue CR25109
Some test cases were changed according to their new behavior.
Package SWDRAW has been moved to TKTopTest toolkit. Class SWDRAW_ToVRML has been moved to XSDRAWSTLVRML_ToVRML
Removed unused classes:
SWDRAW_ShapeBuild
SWDRAW_ShapeConstruct
XSDRAW_Shape
Removed NSPApply command
Test script update
Removed xtrace command
Main problem:
Algorithm of locale extrema, which is called by "sameparameter" command, cannot find extrema because extremal point is far from initial point. Therefore, reparametrization of edge's curve (for same-parameter) cannot be made properly.
Solve:
Using of global extrema (see Approx_SameParameter.cxx).
As the given edge contains two 2d-curves and the second from them is problem, for select needed curve, an interface of "mk2dcurve" DRAW-command is changed. Now there can be used an index of curve (by default, index = 1, as earlier), see help for more detail information.
Test "heal advanced Z3":
Now checkshape finds only two invalid subshapes. Earlier, it found four subshapes. I think it is not regression. Therefore, test case was changed.
Tolerance reducing.
test
asymmetrical check in Standard_Boolean IntCurve_IntPolyPolyGen::findIntersect was changed to symmetrical.
fix wrong calculation of approx parameter on curve for last polygon segment
Added test case bugs/modalg_5/bug24035
Modified TODO in "de" test cases because there are small differences with old behaviour
Modified test case heal/split_closed_faces/G5 because of corrections in intersector's behavior, which lead to changes in checkshape
Now Extrema_LocateExtPC object is used instead of ShapeAnalysis_Curve::CurveNewton().
Removed CurveNewton() function.
Removed code protecting against null-length b-splines (should be obsolete now).
One TODO removed in test heal *advanced W6
Conflicts:
tests/heal/data/advanced/W6
Fixed regressions:
did 011 A6 C9
xsat 101 G6
Small syntax fix.
1. Fixed tests bugs caf bug350 and bug352 failing in Debug mode due to errors in QA code (removing items from the map during iteration).
2. Debug output messages are ignored in parse.rules in heal and bugs group to avoid false failures in Debug mode after changes made for #23609 and last integration of new tests.
3. Test bugs moddata buc60654 removed as duplicate of bug143.
4. Test bugs moddata bug143 fixed to compare real values properly. New command checkreal added for comparing reals with tolerance.
6. Test bugs caf bug114 is fixed to avoid use of OS-specific commands (command meminfo is used instead). Command checktrend is used to check for possible memory leak.
