Extrema_GenLocateExtPS.cxx, Extrema_GenLocateExtPS.hxx:
Adjusting tolerances according to surface sizes is added.
Additional methods for searching solution are added for cases if basic method fails.
Extrema_FuncPSDist.cxx - small bug fixing.
BRepFill_TrimShellCorner.cxx - fixing regression
ChFi3d_Builder_CnCrn.cxx setting parameters for Plate algorithm to improve stability of solution
ProjLib_ComputeApproxOnPolarSurface.cxx - code optimization
Some test cases are modified according to current state of Extrema algorithm
- Extended command Close with an option -silent
- Extended command Close to handle */-ALL for closing ALL document
- Replaced catch {Close D} by Close D -silent in tests
Progress indication mechanism is refactored to support incrementing progress within multithreaded algorithms.
The class Message_ProgressIndicator is only an interface to the user application.
It accumulates the progress provided by progress scopes.
The counter is protected by mutex for thread-safety.
The new class Message_ProgressScope replacing Message_ProgressSentry should be used to advance the progress.
The scopes are nested to each other to reflect the nested nature of operations.
The new class Message_ProgressRange should be used to pass the progress to sub-scopes.
All OCCT algorithms involving progress indication have been updated to new API.
Improvements in Draw_ProgressIndicator:
- Separate console mode has been added in order to make possible to put the progress into std::cout instead
or in addition to the draw interpreter, instead of trigger option "-tclOutput".
- Treatment of Ctrl-Break signal has been added.
Now any operation can be aborted by Ctrl-C or Ctrl-Break keystroke.
Added new test case 'perf fclasses progr_par' for testing of parallel work of the progress.
Adjusting parameters of algorithm depending on axes and parameters of cylinders is added in order to reduce computation time
Test case added: tests/lowalgos/intss/bug31552
tests/perf/modalg/bug26310_1: test case corrected according to current state of algorithm
The following improvements have been made in Boolean operations algorithm:
1. Added possibility to update FaceInfo structure for many faces at once which helps to avoid nested loops.
2. Improve Point-Face classification procedure by caching the FaceExplorer for a face.
1. Approx_ComputeCLine.gxx, Approx_FitAndDivide.hxx, Approx_FitAndDivide2d.hxx, BRepFill_ComputeCLine.hxx
It is base modification, which allows improve performance of approximation with help of Approx_ComputeCLine. The main idea of improvement is using degree selection by inverse order - from maxdegree to mindegree. If tolerance for maxdegree is not reached, there is no sense to make approximation for current number of knots with lower degree, it is necessary to cut parametric interval.
2. ProjLib_ComputeApprox, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ProjectOnPlane
It is additional modification of methods using Approx_ComputeCLine.
Mainly, modifications concern to more optimal choosing parameters for approximation algorithm.
3. BRepCheck_Face
Small improvement of method Intersect(...), which intersects two wires on face.
4. BRepTopAdaptor_FClass2d
Impovement of treatment infinitely narrow faces.
5. ChFi3d/ChFi3d_Builder_6.cxx
Small improvement, which forbids extension of singular boundary of surface.
It was TODO problem in tests/bugs/modalg_7/bug27711_3
6. IntTools_EdgeEdge.cxx
Improvement of performance for cases of searching common parts between line and analytical curve
7. GeomliteTest_CurveCommands.cxx
Adding Draw command fitcurve. This command is analog of approxcurve, but uses Approx_FitAndDivide algorithm.
Mainly to have direct draw command for testing Approx_ComputeCLine.
8. Extrema_ExtElC.cxx
Treatment of case "infinite solutions" for extrema line-ellipse
9. Modification of some tests according to new behavior of algorithm.
10. tests/perf/moddata/bug30435
Test for new improved algorithm.
11. Implementation QAcommand OCC30435 in QABugs_20.cxx used in test bug30435
Approx_ComputeCLine.gxx - criterium to stop interval cutting is increased.
ProjLib_ProjectedCurve.cxx - fix regression for bugs modalg_5 bug25886
Other tests are modified according to current state of algorithm
Removed tight connections between data structures, auxiliary tools and algorithms in order to create extensible solution, easy for maintenance and improvements;
Code is separated on several functional units responsible for specific operation for the sake of simplification of debugging and readability;
Introduced new data structures enabling possibility to manipulate discrete model of particular entity (edge, wire, face) in order to perform computations locally instead of processing an entire model.
The workflow of updated component can be divided on six parts:
* Creation of model data structure: source TopoDS_Shape passed to algorithm is analyzed and exploded on faces and edges. For each topological entity corresponding reflection is created in data model. Note that underlying algorithms use data model as input and access it via common interface which allows user to create custom data model with necessary dependencies between particular entities;
* Discretize edges 3D & 2D curves: 3D curve as well as associated set of 2D curves of each model edge is discretized in order to create coherent skeleton used as a base in faces meshing process. In case if some edge of source shape already contains polygonal data which suites specified parameters, it is extracted from shape and stored to the model as is. Each edge is processed separately, adjacency is not taken into account;
* Heal discrete model: source TopoDS_Shape can contain problems, such as open-wire or self-intersections, introduced during design, exchange or modification of model. In addition, some problems like self-intersections can be introduced by roughly discretized edges. This stage is responsible for analysis of discrete model in order to detect and repair faced problems or refuse model’s part for further processing in case if problem cannot be solved;
* Preprocess discrete model: defines actions specific for implemented approach to be performed before meshing of faces. By default, iterates over model faces and checks consistency of existing triangulations. Cleans topological faces and its adjacent edges from polygonal data in case of inconsistency or marks face of discrete model as not required for computation;
* Discretize faces: represents core part performing mesh generation for particular face based on 2D discrete data related to processing face. Caches polygonal data associated with face’s edges in data model for further processing and stores generated mesh to TopoDS_Face;
* Postprocess discrete model: defines actions specific for implemented approach to be performed after meshing of faces. By default, stores polygonal data obtained on previous stage to TopoDS_Edge objects of source model.
Component is now spread over IMeshData, IMeshTools, BRepMeshData and BRepMesh units.
<!break>
1. Extend "tricheck" DRAW-command in order to find degenerated triangles.
2. Class BRepMesh_FastDiscret::Parameters has been declared as deprecated.
3. NURBS range splitter: do not split intervals without necessity. Intervals are split only in case if it is impossible to compute normals directly on intervals.
4. Default value of IMeshTools_Parameters::MinSize has been changed. New value is equal to 0.1*Deflection.
5. Correction of test scripts:
1) perf mesh bug27119: requested deflection is increased from 1e-6 to 1e-5 to keep reasonable performance (but still reproducing original issue)
2) bugs mesh bug26692_1, 2: make snapshot of triangulation instead of wireframe (irrelevant)
Correction in upgrade guide.
Test for handles is updated according to behavior expected from modern compilers.
Performance test perf ncollection A1 is updated (valid range extended) according to measurements made on Debian 8 with GCC 4.9 and on Ubuntu 16.04 with CLang 3.8 and 6.0 and GCC 4.7, 4.9, and 5.0.
Bnd_OBB constructor from Bnd_Box is fixed for VOID input.
DRAW command bounding command is adjusted:
- Support of old syntax 'bounding shape'is restored.
- Exception on VOID bounding box is avoided.
- Arguments are handled in case-insensitive way.
- Options -s, -perfmeter, and ability to set result as first argument are removed as redundant.
- Help is moved to command definition.
Separate command OCC29311 is added (in QADraw) to do the same as option -perfmeter did; tests are updated.
Various performance improvements in STEP read/write algorithms:
- Search for the label of a shape or component shape is improved using map mechanism instead of brute force iteration.
- Invariant FindEntities() is moved out of the loop in the method getStyledItem in STEPCAFControl/STEPCAFControl_Writer.cxx.
- A pointer to the end of binders chain is added in Transfer_Binder class to speed up adding a binder to the chain.
- Small fixes are added to eliminate excess copying of handles, calls of handle DownCasts and so on.
Stack overflow is removed during destruction of STEP model with long chains of Transfer_Binder.
It is possible to use the Draw commands ReadStep and WriteStep to read/write from the session without accessing the disk file (use '.' for the file name).
Performance test cases for STEP reading/writing have been added.
Implementation of the method for simplification of the result of Boolean Operation on the API level.
The method BRepAlgoAPI_BuilderAlgo::SimplifyResult has been added, so the derived classes such as BooleanOpeation and Splitter can also use this method.
The result shape simplification should be called after the operation is done. The simplification is performed by the means of ShapeUpgrade_UnifySameDomain algorithm.
Draw command "bsimplify" has been added to control the simplification options.
Documentation for new functionality and draw commands controlling the options of Boolean operations.
Test cases for the new functionality.
Side-effect change:
The algorithms in Boolean component have been changed to use the BRepTools_History as a History tool.
Now it became possible to disable the collection of shapes modifications during Boolean Operations, which may be useful for performance sake (in draw the option is controlled by *setfillhistory* command).
Draw command "unifysamedom" has been changed to accept the angular tolerance in degrees instead of radians.
1. Extrema algorithm calls Curve-surface intersector. This intersector returns flag about infinite solution (in spite of extrema's returning not-parallel status correctly - axes of considered cylinder and circle are not parallel). In this case, attempt of obtaining number of intersection points leads to exception.
So, the fix adds check of infinite solution after the intersection algorithm.
2. The methods IsDone(), IsParallel(), NbExt(), SquareDistance() and Points() (of Extrema_* classes) have been corrected to make them consistent to the documentation.
3. Revision of some Extrema_* classes has been made in order to avoid places with uninitialized variables.
4. Currently Extrema does not store any points in case when the arguments are parallel. It stores the distance only.
5. Some cases on Extrema-algo have been moved from "fclasses"-group to "modalg"-group.
Test parse rules are improved to recognize messages with word 'fail' or 'failure' as errors.
Test cases are corrected accordingly (TODO or REQUIRED statements added where fail messages were not noticed previously).
Function Strtod() is reimplemented using open source (MIT-style license) code by David M. Gay instead of strtod() provided by standard run-time library. This improves its performance by 3-10 times.
Functions Atof(), Strtod(), Printf(), Sprintf(), Fprintf() are declared as extern "C" to be usable from C programs.
Strtod() is used in Interface_FileReaderData::Fastof() and in RWStl_Reader to accelerate their work.
DRAW command QATestAtof and test perf fclasses strtod are added to check correctness and performance of Strtod().
Test perf draw restore is added to monitor performance of reading BREP files.
Minor off-topic corrections:
- method Standard_GUID::Assign (const Standard_UUID&) is implemented (was empty);
- Precision.hxx is included in BRepMesh_Vertex.hxx that uses it.
Wrong distance computation has been corrected.
Some test-cases have been corrected according to their new behavior. Namely, built (by approximation algorithm) curve(s) has changed its geometrical position.
1. tests/blend/simple/X4
It is not a regression because the result is not correct on both MASTER and FIX (see explanation in the issue #26740). This problem is expected to be solved after porting Fillet-algorithm to new Boolean operation. Old Boolean operations do not cover Edge-Edge tangent-zone by vertex.
2. tests/bugs/modalg_6/bug27341_318
"checknbshapes" has been deleted in order to avoid non-stable behavior (see issue #29360) of this test case. New result is OK on both Linux and Windows platform.
1. Implementation of the user-defined option for usage of Oriented Bounding Boxes (OBB) in Boolean Operations for additional filtering (rejection) of selected for intersection pairs of sub-shapes.
By default the usage of OBB is turned off.
To enable/disable its usage the method SetUseOBB(flag) should be used. This method is available for all operations in Boolean Component.
To enable/disable it in draw the command "buseobb 0/1" should be used. Note, that this will affect all subsequent operations.
The OBB for the shapes are built by first necessity and stored into operation context (IntTools_Context).
2. Usage of the OBB in some test cases.
1. The class Bnd_OBB has been created to describe the Oriented Bounding Box.
2. Several key methods have been implemented: Bnd_OBB::IsOut(...), Bnd_OBB::Add(...) and Bnd_OBB::Enlarge(...).
3. Interface of Bnd_Box class has changed. New methods have been created. See Bnd_Box.hxx for detailed information.
4. BRepBndLib and Draw_Box classes have been amended in order to provide correct work with Bnd_OBB class.
5. Interface of "bounding" DRAW-command has been changed. Please see help for detailed information.
6. New DRAW-command "isbbinterf" has been created. Please see help for detailed information.
7. "boundingstr" and "optbounding" DRAW-commands have been eliminated because their function can be made by "bounding" DRAW-command (e.g. see tests/bugs/vis/buc60857 or samples/tcl/snowflake.tcl test cases).
8. Documentation has been updated.
Prevent modification of the input shapes in destructive mode in case their sub-shapes have not been modified:
1. Prevent edge splitting for the pave blocks with old vertices if it is possible to use the existing edge (*BOPAlgo_PaveFiller::MakeSplitEdges*);
2. Prevent creation of the new containers (WIRES/SHELLS/COMPSOLIDS) if non of its parts have been modified (*BOPAlgo_Builder::FillImagesContainer*);
3. Prevent creation of the new face if non of its wires have been modified (*BOPAlgo_Builder::FillImagesFaces*);
4. If possible, use the original face to be the representative for the group of SD faces (*BOPAlgo_Builder::FillSameDomainFaces*).
Cosmetic changes:
1. Documentation of the *BOPAlgo_Builder* class.
2. Making simple methods of the *BOPAlgo_Builder* class inline.
3. Getting rid of the *BOPAlgo_Builder::mySplits* field as it is excessive. *BOPAlgo_Builder::myImages* can be used instead.
3. Moving the Check Inverted option from *BOPAlgo_Options* to *BOPAlgo_Builder*.
Test cases for the issue.
Adjustment of the test case to their current behavior.
Test case *blend/complex/H2* has been deleted as duplicate of the test case *blend/simple/Z1*.
This patch turns off some not needed modes of fix in the called ShapeFix_Face algorithm.
It stores pcurves on planes in the edges to avoid repeated computation of the same pcurves many times (it is done only when SafeInputMode is false).
It avoids unnecessary replace/apply actions in the modification context.
It removes the code that makes decomposition of surface of the face on several faces.
The new command buildpcurvesonplane has been added, which builds and stores pcurves of edges on planar faces. This is useful for investigations how presence of pcurves on planes influence performance of algorithms.
Make drawing of dimension line in snowflake test independent on the order of vertices in the result.
In order to improve performance of Boolean Operations on the relatively fast cases the following improvements have been made:
1. Initialization of the FaceInfo information for the faces participating in Face/Face interference, even when the gluing is ON, to take into account intersection of their sub-shapes.
2. Code simplification & duplication removal - the methods BOPAlgo_ShellSplitter::MakeConnexityBlocks and BOPAlgo_WireSplitter::MakeConnexityBlocks have been unified into BOPTools_AlgoTools::MakeConnexityBlocks.
3. Avoid unnecessary bounding box computation for solids during DS initialization. The bounding boxes for solids will be computed during the building stage to find faces located inside solids.
For the shape self-interference check (performed by the BOPAlgo_CheckerSI), the bounding box is still computed, as it is necessary to resolve Shape/Solid intersections.
4. Use only three sample points to check coincidence of line and plane.
5. Perform necessity of planes intersection only when the gluing is off.
6. Avoid repeated initialization of 2D classifier while building splits of the faces.
7. Post treat stage:
7.1. Method CorrectWires: Save edge's data (PCurve, parameter of the vertex, range) to avoid its recalculation.
7.2. Method CheckEdge: While checking vertices on edges avoid unnecessary calculation of their location.
8. Provide possibility to disable the classification of the input solids on the inverted status (to be the holes in the space).
9. Avoid building of bounding boxes for faces/solids during splitting of the input arguments for their classification relatively hole faces/shells if there are no holes created.
10. Avoid rebuilding of the faces/solids from arguments which does not acquire any inside parts from other arguments during the operation by using their draft versions as their splits.
Test cases for the issue.
Correction of the test cases boolean gdml_public A9 and bugs modalg_7 bug28485 as they are improvements.
Additional test case for the issue #28485 as it is fixed by the current changes.
Tests are added to control output and performance of progress indicator (bugs fclasses bug28478 and perf fclasses progress, respectively).
Implementation of class Draw_ProgressIndicator is improved to update indicator basing on achieved total progress (1% by default) instead of elapsed time since last update.
Method OSD_Chronometer::Restart() is fixed to actually reset the counter.
DRAW command readstl is improved to show progress indicator if configured (by command XProgress).
Description of class Message_ProgressIndicator is updated; code example is added in description of Message_ProgressSentry.
1. The reason of exception has been eliminated.
2. Algorithm in IntPatch_WLineTool::JoinWLines(...) method has been modified in order to forbid join curves in the point where more than two intersection lines meet. More over, joining is forbidden if local curvature in the connection point is too big (see function CheckArgumentsToJoin(...) in the file IntPatch_WLineTool.cxx).
3. Interface of IntPatch_WLineTool::JoinWLines(...) method has been modified in order to reduce number of arguments.
4. Small corrections in IsSeamOrBound(...) static function has been made. Namely, check has been added if two boundaries are in the same period region but are too far each to other (see IntPatch_WLineTool.cxx, IsSeamOrBound(...) function, line # 532).
5. "Reversed" flag has been made local. Now, it is pure local characteristic: the algorithm decides itself, shall we reverse the argument order. This correction makes the algorithm more commutative (see issue #25404). However, IntPatch_WLineTool::JoinWLines(...) method can return non-commutative result.
6. Algorithm of searching small intersection curves has been improved.
7. New methods have been added in Bnd_Range class.
Some test cases have been adjusted according to their new behavior.
1. tests\bugs\modalg_6\bug26310_3
tests\bugs\modalg_6\bug26310_4
tests\bugs\moddata_2\bug235
tests\perf\modalg\bug26310_1
tests\bugs\modalg_5\bug24915
Logic of these cases has been changed. Mover over, additional check has been added in "bug26310_1" test case. Therefore, its performance will be slower than on the current MASTER.
2. tests\bugs\modalg_5\bug25292*
Scripts have been rewritten in order to make it more readable. Logic of these cases has not been changed.
Shell check has been improved to use well-known width-first search. It significantly reduces computation time on the big shells.
Test case has been added.
Minor correction in test case
Class DBRep_DrawableShape is changed to postpone generation of display data until the shape is actually displayed (for the first time).
Test perf draw bug28404 is added.
Command checkplatform was created.
All test cases were updated.
Global variable os_type was eliminated.
New option -osx (MacOS) for procedure checkplatform was added.
