Poles bounding box for curve added for bezier and bspline curves.
Method Poles() for Bezier curve added.
Test case for issue CR26560
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
Test cases are updated to the new behavior.
Changed the rules for the types of the arguments for different operations:
1. FUSE: All arguments and tools should have the same dimension;
2. CUT: The MAXIMAL dimension of the ARGUMENTS should be less
or equal to the MINIMAL dimension of the TOOLS;
3. CUT21: The MINIMAL dimension of ARGUMENTS should be grater
or equal to the MAXIMAL dimension of the TOOLS;
4. COMMON: The arguments and tools could have any dimensions.
For the arguments of collection type (WIRE, SHELL, COMPSOLID)
the type will be passed into the result of the operation.
The documentation should be updated according to new behavior.
Documentation has been updated.
Implemented suggestions by MSV and some grammar changes.
Test cases for issue CR26565
Correction of test cases for issue CR26565
Correction of test cases for issue CR26565
class BOPTools_AlgoTools2D
method
Standard_Integer BOPTools_AlgoTools2D::AttachExistingPCurve
(const TopoDS_Edge& aE2, // old
const TopoDS_Edge& aE1, // new
const TopoDS_Face& aF,
const Handle(IntTools_Context)& aCtx)
To prevent huge tolerance increasing check the distances between 2d and 3d
curves (through surface) before attaching 2d curve to the edge.
Test case for issue CR26718
Correction of test cases for issue CR26718
Algorithm of computation of safe shift value along 2D-line (in order to distance between two points was less than tolerance) has been improved.
Correction of some test cases in accordance with their new behavior.
Test-case for issue #26642
Small correction of test-case
Small correction of test-case bugs heal bug26642
Check for orientation of the solid corrected to ensure that cycle always finishes.
Test case added: bugs modalg_6 bug26627
Tests boolean volumemaker A3, B5, B7 corrected (improvements)
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
class BOPAlgo_PaveFiller
method void BOPAlgo_PaveFiller::PutPaveOnCurve
(const Standard_Integer nV,
const Standard_Real aTolR3D,
BOPDS_Curve& aNC,
const BOPCol_MapOfInteger& aMI,
BOPCol_DataMapOfIntegerReal& aMVTol,
const Standard_Integer iCheckExtend)
Do not put the pave on the curve in case if there is already one with the same parameter.
Update tolerance of the existing vertex to reach the new one.
Added test case bugs/modalg_6/bug26444.
Test boolean/volumemaker/G1 is stable now (deleted TODOs), test offset/faces_type_i/C9 is bad (offset is done with wrong result).
Computing is unified. ComputeFastTol3d() method was deleted.
If intersection result contains 3D- and corresponded two 2D-curves then tolerance will be computed with using BRepLib_CheckCurveOnSurface algorithm (check same-parameter).
If intersection result contains only 3D-curve (getting 2D-curve can be switched off by users) then tolerance will be computed with using GeomAPI_ProjectPointOnSurf algorithm (projects some point of 3D-curve on the surface and finds maximal distance).
Some workarounds have been deleted.
Some test case have been changed.
1. class BOPAlgo_ShellSplitter
static method void RefineShell(TopoDS_Shell& theShell,
BOPCol_ListOfShape& aLShX)
Added protection from INTERNAL edges.
2. class BOPAlgo_MakerVolume
method void BOPAlgo_MakerVolume::MakeBox(BOPCol_MapOfShape& theBoxFaces)
Creation of the overlapping box of proper size.
Test-cases for issue #26379
Classifier has been corrected to not take into account a probing point if the probing line appears to be tangent to the boundary at this point.
But allow to use tangent point if all points on the edge are tangent.
Modify bad test cases.
Test case for issue CR26206
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
Added subgroups volumemaker, gdml_private and gdml_public
Moved scripts from public repository ti test cases
Added more TODOs to unstable test cases
Small corrections for unstable test cases
Changes:
class IntTools_FClass2d
- method:
TopAbs_State IntTools_FClass2d::Perform
(const gp_Pnt2d& _Puv,
const Standard_Boolean RecadreOnPeriodic) const
has been changed.
The value of tolerance
For the value of tolerance for classification,
the minimum (among UResolution, VResolution) value is used.
Test case for issue CR26080
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
1. Restriction line is processed in IntTools_FaceFace with using methods of GeomInt_IntSS class.
2. Check, if Restriction- and Walking-lines (or Restriction-Restriction lines) are coincided, has been added in IntPatch_ImpPrmIntersection.cxx (at that RLine is considered to be isoline only).
3. Check, if RLine and GLine are coincided, has been added in IntPatch_ImpImpIntersection.cxx.
4. Create new class IntPatch_PointLine, which is inherited from IntPatch_Line.
5. The reason of exception (in DEBUG MODE) has been eliminated.
New test cases for issue #25416 were added.
tests/bugs/modalg_5/bug24650 was modified.
If Walking-lines are coincided we kept line, which contains more points or has more length (because it is more precisely, most likely).
Test cases for issue CR25828
Some test cases were changed
Updated test-cases from branch CR24255_3
0024255: Regressions in test cases on OCCT vc9 win64 Release
Small refactoring.
Fix for CASE bugs modalg_5 bug25298_09: FAILED (error)
Test-cases correction (bugs modalg_5 bugs25804_1, bug25704_2)
Changes:
class BRepCheck_Solid
method:
void BRepCheck_Solid::Minimum()
has been changed. The treatment of shells with INTERNAL faces has been added.
Added test case bugs/modalg_5/bug25735
Added TODOs in test cases according to issue 25735.
1. The tool of computing the max distance between 3D curve and its 2d representation on the face
has been moved from static methods in BOPTools_AlgoTools class to BRepLib_CheckCurveOnSurface class.
2. The tools has been applied to 2d curves built during Boolean Operation
and to some intersection curves.
3. The functions
Standard_Boolean BOPTools_AlgoTools::ComputeTolerance
(const TopoDS_Face& theFace,
const TopoDS_Edge& theEdge,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
and
Standard_Boolean IntTools_Tools::ComputeTolerance
(const Handle(Geom_Curve)& theCurve3D,
const Handle(Geom2d_Curve)& theCurve2D,
const Handle(Geom_Surface)& theSurf,
const Standard_Real theFirst,
const Standard_Real theLast,
Standard_Real& theMaxDist,
Standard_Real& theMaxPar)
have been developed for easy access to BRepLib_CheckCurveOnSurface functionality.
class IntTools_FaceFace
method void IntTools_FaceFace::ComputeTolReached3d()
Case for Plane/BSpline intersection added for treatment.
Test case for issue CR25597
Fix for regression boolean bsection N7.
class BOPAlgo_PaveFiller
method
void BOPAlgo_PaveFiller::UpdateFaceInfo
(BOPDS_DataMapOfPaveBlockListOfPaveBlock& theDME,
const BOPCol_DataMapOfIntegerInteger& theDMV)
Updating Face Info information with new vertices created in PostTreatFF.
Correction boolean/bsection/N2
Updated test cases.
Wrong border 1.0e-9 jump has deleted. Added periodicity information when projecting to surface.
Period "jump" bug fixes.
AppCont_LeastSquare conversion to non cdl class.
AppCont_Function + AppCont_FunctionTool combined in one class providing the same functionality and converted to non cdl.
Testcase modification.
Test cases for issue CR24988
Fixed incorrect comparison.
Changes:
class BOPTools_AlgoTools
static function:
Standard_Boolean FindPointInFace(const TopoDS_Face& aF,
const gp_Pnt& aP,
gp_Dir& aDB,
gp_Pnt& aPOut,
Handle(IntTools_Context)& theContext,
GeomAPI_ProjectPointOnSurf& aProjPL,
const Standard_Real aDt,
const Standard_Real aTolE)
Binormal calculation starts from the point located outside the tolerance circle of the edge
Test case for issue CR25432
Correction of test cases for issue CR25432
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
