Method EstimateDeflection has been added to BRepLib in order to check and update value of deflection provided by Poly_Triangulation;
Introduction of Poly_TriangulationParameters intended to keep info about initial parameters of mesh stored by Poly_Triangulation;
BRepMesh stores user-specified parameters to Poly_Triangulation via Poly_TriangulationParameters;
Prefer initial parameters of mesh generator stored in Poly_Triangulation during check of mesh consistency.
1) Extend Poly_Triangulation by mesh purpose, possibility to be cleared and late-load deferred data interfaces.
2) Update BRep_TFace to store list of triangulations istead of single one. And also active one. Update getter and setter of single triangulation and add new methods to interaction with whole triangulations list.
3) Update BRep_Tool to get single triangulation of face according to the input mesh purpose or whole triangulations list.
4) Update BRep_Builder to make face by not only single triangulation but whole triangulations list with specified active one.
5) Add new methods to BRepTools to interact with shape triangulations (Load/Unload/Activate/LoadAll/UnloadAllTriangulation(s))
6) Add new 'tlateload'command for shape to load/unload/activate triangulations.
7) Update 'trinfo' command by '-lods' options to print detailaed information about LODs of this shape
8) Support empty triangulations by selection. Use bounding box selection in this case.
9) Add new 'outdisplist' option to XDispaly command to print list of displayed objects to output variable but not to theDI
10) Add new '-noecho' option to vdisplay command to skip printing of displayed objects to theDI
11) Create new RWMesh_TriangulationSource as mesh data wrapper for delayed triangulation loading.
12) Create new RWMesh_TriangulationReader as base interface for reading primitive array from the buffer.
13) Cache nodes/triangles number defined in glTF file
14) Use RWMesh_TriangulationSource class as base of RWGltf_GltfLatePrimitiveArray one and RWMesh_TriangulationReader class as base of RWGltf_TriangulationReader one
15) Add possibilty to support of LODs by glTF reader. It is possible to skip data loading and load them later
16) Add new '-skiplateloading' (to skip triangulation loading), '-keeplate' (to keep information about deferred storage to load/unload triangulation later),
'-toprintdebuginfo' (to print additional debug information) options to ReadGltf command
17) Add new test of glTF late loading
- Added comment to the method
- Added Boolean argument indicating the need for a strict
- Extended OCC11758 command in QABugs_19.cxx to verify IsRealValue()
- Updated existing places of IsRealValue() usage in ViewerTest to use new flag
BndLib/BndLib_AddSurface.cxx : algorithm of building bounding box for BSpline surfaces is improved
Test cases are modified according to current state of algorithm
Test case bug31995 added
Added custom meshing core algorithm to generate base mesh using Delabella library,
which can be enabled via IMeshTools_Parameters::MeshAlgo option or CSF_MeshAlgo environment variable.
Do not fill cirles filter upon explicit initialization.
Call base postProcessMesh functionality after initialization of circles in BRepMesh_CustomDelaunayBaseMeshAlgo.
Added Vsprintf() wrapper for vsprintf() preserving C locale.
BRepMesh: Add new mesh parameter *AllowQualityDecrease* which affects the criteria used for checking of the consistency of the existing mesh to new meshing parameters.
So if set to true it will force the meshing of the shape if current deflection strongly vary from the new one, no matter in which side.
BRepTools::Clean: Keep triangulation on non-geometric shapes (faces with no surface or edges with no curves).
GeomConvert_1.cxx:
Creation periodic BSpline surfaces from trimmed periodic surface if trim is boundaries of periodic domain is allowed
BRepTools_NurbsConvertModification.cxx:
Checking domain of 2dCurves if surfaces are periodic is added
Test case tests/bugs/mesh/bug30008_2 is modified according to current behavior
Test case tests/bugs/modalg_7/bug31242 is added
BRepMesh_ModelHealer - recognize a small face with 1 wire and 2 small edges as a face for refinement.
BRepMesh_DefaultRangeSplinner - reduce tolerance on tiny faces to improve the meshing results.
Added new test cases: bugs mesh bug25044_*.
Existing test cases updated to reflect improvements.
Added new parameter KeepSmallEdges to IMeshTools_Parameters allowing to compute min size for each edge locally, depending on the length of particular edge.
Parameter -smalledges now available for incmesh command.
IMeshTools_ModelAlgo and IMeshTools_ModelBuilder have been changed to provide exception protected interfaces for performing the operations.
Protect single Edge/Face discretization methods from raising exceptions to skip broken Edges/Faces and allow mesh construction on the whole model.
1. Approx_ComputeCLine.gxx, Approx_FitAndDivide.hxx, Approx_FitAndDivide2d.hxx, BRepFill_ComputeCLine.hxx
It is base modification, which allows improve performance of approximation with help of Approx_ComputeCLine. The main idea of improvement is using degree selection by inverse order - from maxdegree to mindegree. If tolerance for maxdegree is not reached, there is no sense to make approximation for current number of knots with lower degree, it is necessary to cut parametric interval.
2. ProjLib_ComputeApprox, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ProjectOnPlane
It is additional modification of methods using Approx_ComputeCLine.
Mainly, modifications concern to more optimal choosing parameters for approximation algorithm.
3. BRepCheck_Face
Small improvement of method Intersect(...), which intersects two wires on face.
4. BRepTopAdaptor_FClass2d
Impovement of treatment infinitely narrow faces.
5. ChFi3d/ChFi3d_Builder_6.cxx
Small improvement, which forbids extension of singular boundary of surface.
It was TODO problem in tests/bugs/modalg_7/bug27711_3
6. IntTools_EdgeEdge.cxx
Improvement of performance for cases of searching common parts between line and analytical curve
7. GeomliteTest_CurveCommands.cxx
Adding Draw command fitcurve. This command is analog of approxcurve, but uses Approx_FitAndDivide algorithm.
Mainly to have direct draw command for testing Approx_ComputeCLine.
8. Extrema_ExtElC.cxx
Treatment of case "infinite solutions" for extrema line-ellipse
9. Modification of some tests according to new behavior of algorithm.
10. tests/perf/moddata/bug30435
Test for new improved algorithm.
11. Implementation QAcommand OCC30435 in QABugs_20.cxx used in test bug30435
The previous code has a condition to avoid processing the same faces if the face has a location.
The similar condition should be applied during the edges processing.
If not doing this, in the previous implementation, IMeshData_Edge instances are created for all edges(even located), but edges of faces located are not filled with curves.
As a result we had wrong local selection of edges.
Limit addition of edges to data model by ones with unique TShape and location using edges map already available in BRepMesh_ShapeVisitor.
Aspect_IS_HOLLOW now an alias to Aspect_IS_EMPTY and Aspect_IS_HIDDENLINE does not implicitly enables mesh edges,
so that Graphic3d_AspectFillArea3d::SetDrawEdges() should be set independently.
OpenGl_ShaderManager now provides built-in GLSL programs for drawing mesh edges
in single pass (and on OpenGL ES which does not provide glPolygonMode()).
Graphic3d_RenderingParams::ToEnableAlphaToCoverage is now enabled by default
and properly handled at TKOpenGl level - enables coverage for Graphic3d_AlphaMode_Mask primitives.
OpenGl_PrimitiveArray now uses GLSL programs instead of glPolygonMode() by default,
which can be managed by OpenGl_Caps::usePolygonMode flag (desktop OpenGL only).
glPolygonMode() is also used as fallback regardless OpenGl_Caps::usePolygonMode flag
when GLSL programs are not supported (Geometry Shaders are required)
or stipple line style is required (not implemented within Face GLSL).
vaspects command has been extended by -setInterior -setDrawEdges -setEdgeColor -setEdgeType -setEdgeWidth
arguments replacing vsetinteriorstyle/vsetedgetype/vunsetedgetype commands.
vaspects now accepts arguments without "set" prefix.
ViewerTest::ParseColor() now parses RGBA color.
Redundant command BUC60738 has been removed.
AIS_ColorScale - fixed usage of uninitialized FillArea aspects.
1. Test case for the issue has been created. The issue is fixed by the patch #26106.
2. Since now, "tricheck" command uses edge tolerance instead of edge deflection to check cross-face-errors (set of nodes of the edge on 1st face must be equal to set of nodes of the same edge on 2nd face).
Split seam edge of a cone according to the specified parameters.
Seam edge functor is called before check of triangulation consistency in order to keep face status consistent.
The cause is that split seam edge can set Outdated flag when Reused is set by another functor without reset which can lead to refusement of such face by triangulation procedure.
Fix compilation error on VS2008
1. Check whether the mesh satisfies the required angular deflection has been amended. Namely normals (to the surface) in the ends of any not "frontier" link are made collinear (with the given angular tolerance).
2. New parameters AngleInterior and DeflectionInterior have been added in IMeshTools_Parameters structure.
3. In case of thin long faces with internal edges, add points of internal edges to control parameters using grabParamsOfInternalEdges() in order to avoid aberrations on its ends. Disable addition of parameters from boundary edges in case of BSpline surface. Deviation can be controlled through the deflection parameter.
4. Grab parameters from edges in case if there is just a single interval on BSpline surface along U and V direction.
Removed tight connections between data structures, auxiliary tools and algorithms in order to create extensible solution, easy for maintenance and improvements;
Code is separated on several functional units responsible for specific operation for the sake of simplification of debugging and readability;
Introduced new data structures enabling possibility to manipulate discrete model of particular entity (edge, wire, face) in order to perform computations locally instead of processing an entire model.
The workflow of updated component can be divided on six parts:
* Creation of model data structure: source TopoDS_Shape passed to algorithm is analyzed and exploded on faces and edges. For each topological entity corresponding reflection is created in data model. Note that underlying algorithms use data model as input and access it via common interface which allows user to create custom data model with necessary dependencies between particular entities;
* Discretize edges 3D & 2D curves: 3D curve as well as associated set of 2D curves of each model edge is discretized in order to create coherent skeleton used as a base in faces meshing process. In case if some edge of source shape already contains polygonal data which suites specified parameters, it is extracted from shape and stored to the model as is. Each edge is processed separately, adjacency is not taken into account;
* Heal discrete model: source TopoDS_Shape can contain problems, such as open-wire or self-intersections, introduced during design, exchange or modification of model. In addition, some problems like self-intersections can be introduced by roughly discretized edges. This stage is responsible for analysis of discrete model in order to detect and repair faced problems or refuse model’s part for further processing in case if problem cannot be solved;
* Preprocess discrete model: defines actions specific for implemented approach to be performed before meshing of faces. By default, iterates over model faces and checks consistency of existing triangulations. Cleans topological faces and its adjacent edges from polygonal data in case of inconsistency or marks face of discrete model as not required for computation;
* Discretize faces: represents core part performing mesh generation for particular face based on 2D discrete data related to processing face. Caches polygonal data associated with face’s edges in data model for further processing and stores generated mesh to TopoDS_Face;
* Postprocess discrete model: defines actions specific for implemented approach to be performed after meshing of faces. By default, stores polygonal data obtained on previous stage to TopoDS_Edge objects of source model.
Component is now spread over IMeshData, IMeshTools, BRepMeshData and BRepMesh units.
<!break>
1. Extend "tricheck" DRAW-command in order to find degenerated triangles.
2. Class BRepMesh_FastDiscret::Parameters has been declared as deprecated.
3. NURBS range splitter: do not split intervals without necessity. Intervals are split only in case if it is impossible to compute normals directly on intervals.
4. Default value of IMeshTools_Parameters::MinSize has been changed. New value is equal to 0.1*Deflection.
5. Correction of test scripts:
1) perf mesh bug27119: requested deflection is increased from 1e-6 to 1e-5 to keep reasonable performance (but still reproducing original issue)
2) bugs mesh bug26692_1, 2: make snapshot of triangulation instead of wireframe (irrelevant)
Correction in upgrade guide.
