The code has been fixed to avoid taking a reference from a field of a temporary variable
(BRepApprox_ApproxLine::Point() returns non-reference structure).
readstl syntax has been modified, so that it creates a single-face triangulation by default.
The argument "trinagulation" is no more supported.
The new argument "-brep" has been introduced to generate
a compound of per-triangle faces instead (old default behavior of the command).
The algorithm has been improved for the cases when the intersection line goes through the cone apex.
<!break>
1. All special points are put to the ALine forcefully (if they are true intersection point). Currently this step has not been implemented yet.
2. Now the tolerance of IntPatch_Point (put into ALine) is computed in order to cover the distance between it and the correspond ALine.
3. Test cases have been created.
4. Procedure of trimming IntAna_Curve has been improved.
5. Criterion when the discriminant of IntAna_Curve can be considered to be equal to 0 has been improved.
6. Methods IntAna_Curve::FindParameter(...) (and IntPatch_ALine::FindParameter(...)) currently returns list of all parameters corresponding the given point (IntAna_Curve can be self-interfered curve). Before the fix, this method always returned only one (randomly chosen) parameter.
7. Interfaces of the following methods have been changed: IntAna_Curve::FindParameter(...), IntPatch_ALine::FindParameter(...), IntPatch_ALine::ChangeVertex(...), IntPatch_SpecialPoints::AddPointOnUorVIso(...), IntPatch_SpecialPoints::AddSingularPole(...), IntPatch_WLineTool::ExtendTwoWLines().
8. Following methods have been added: IntAna_Quadric::SpecialPoints(...), IntPatch_ALineToWLine::GetSectionRadius(...), IntPatch_SpecialPoints::ProcessSphere(...), IntPatch_SpecialPoints::ProcessCone(...), IntPatch_SpecialPoints::GetTangentToIntLineForCone(...).
------------------
1) tests/boolean/volumemaker/C5
tests/boolean/volumemaker/C6
tests/boolean/volumemaker/E7
They are real IMPROVEMENTS. In the FIX (in compare with MASTER), section result between pairs of faces f2&f6 (C5), f3&f7 (C6) and f1&f5 (E7) is closed. Separated test cases have been created in order to focus on the problem with section. Bug #28503 has been fixed.
Correction in test cases.
Argument of LowerCase() and UpperCase() is cast to int via unsigned char to avoid passing negative integer in the case if the argument char is in the extended part of ASCII table (which would result in undefined behavior according to C++ standard).
Check for double solutions has been added in algorithms Extrema_ELPCOfLocateExtPC and Extrema_ELPCOfLocateExtPC2d
that find extrema between point and curve.
XCAFDoc_ShapeTool::Expand method now avoids creation of subshapes under assemblies.
XCAFDoc_ShapeTool::AddSubShape now avoids creation subshapes under all labels except for simple parts.
Use of input tolerance has been eliminated in Geom2dInt_GInter algorithm called from BRepClass_Intersector::Perform(...) method.
Now the input tolerance is used only for checking ON-status of classification.
AIS_Manipulator::ObjectTransformation() has ceased to use undefined point for myStartPick initialization within AIS_MM_Translation mode.
AIS_MM_Scaling cas has been merged into AIS_MM_Translation to reduce code duplication.
Extrema_ExtElC/IntAna_IntConicQuad are now used directly instead of more generic GeomAPI_ExtremaCurveCurve/GeomAPI_IntCS.
Deprecated functionality related to Local Context has been removed.
The following classes and types have been removed:
AIS_LocalContext, AIS_DataMapOfILC, AIS_LocalStatus, SelectMgr_SequenceOfSelector, SelectMgr_DataMapOfObjectSelectors.
Value AIS_DS_Temporary has been removed from enumeration AIS_DisplayStatus.
The following methods related to Local Context have been removed from AIS_InteractiveContext:
::HasOpenedContext(), ::HighestIndex(), ::LocalContext(),
::LocalSelector(), ::OpenLocalContext(), ::CloseLocalContext(),
::IndexOfCurrentLocal(), ::CloseAllContexts(), ::ResetOriginalState(),
::ClearLocalContext(), ::UseDisplayedObjects(), ::NotUseDisplayedObjects(),
::SetShapeDecomposition(), ::SetTemporaryAttributes(),
::ActivateStandardMode(), ::DeactivateStandardMode(), ::KeepTemporary(),
::SubIntensityOn(), ::SubIntensityOff(),
::ActivatedStandardModes(), ::IsInLocal()
and ::AddOrRemoveSelected() taking TopoDS_Shape.
The methods AIS_InteractiveContext::Display() and ::Load()
taking argument theToAllowDecomposition have been marked as deprecated;
the new methods without this unused argument should be used instead.
AIS_InteractiveContext::DisplayedObjects() - removed argument theOnlyFromNeutral.
SelectMgr_SelectionManager has been simplified so that now it support only single Viewer Selector.
The argument -local has been removed from Draw Harness commands vselmode, vremove, vdisplay, vdisplayall, verase.
New algorithms calculating global properties on mesh data have been added:
- BRepGProp_MeshCinert computes the global properties of polylines represented by a set of points;
- BRepGProp_MeshProps computes the global properties of a surface mesh.
Existing tool BRepGProp now automatically uses new algorithm for triangulation-only faces.
By default, algorithm will use exact geometry objects (surfaces), when it is available (as before the patch);
this behavior can be switched by a new flag UseTriangulation, forcing usage of triangulation instead of exact geometry when both defined.
Image_Color - removed semibroken summ/difference operators.
Image_Diff now uses signed integer for computing differnce between ubyte3 components;
properly compare squared tolerance.
Image_Diff - dropped declaration of Image_ColorXXX24.
RGB color difference is now computed using Chebyshev distance instead of Euclidean distance
Image_PixMap - added methods RawValue()/ChangeRawValue() returning a pointer
to image where specified pixel data is defined.
Methods of NCollection_Vec3 and NCollection_Vec3 that returned reference to internal buffer as vector of lower dimension (non-const xy(), xyz() etc.) are eliminated.
Use of these methods could led to generation of incorrect binary code by GCC.
Instead added new method SetValues() accepting vector of lower dimension and additional value.
DRAW test command QANColTestVec4 reproducing one situation where the bug occurs is added, along with a test case.
TopoDS_Shape::NbChildren() - new method has been introduced.
TopoDS_Shape.lxx, TopoDS_TShape.lxx - inline methods have been moved to hxx.
TopoDS_TShape_Flags has been redeclared as enumeration instead of preprocessor macros.
Cyclic dependency between headers TopoDS_Shape.hxx and TopoDS_TShape.hxx eliminated.
Places where TopoDS_Iterator is used only for calculation of number of sub-shapes are updated to use NbChildren() instead
Modified method: Approx_ComputeLine::Compute
Check of multicurve is now always unconditional, the procedure of check is modified to avoid infinite loops.
Modified classes: GeomLib_CheckBSplineCurve and GeomLib_Check2dBSplineCurve
Correction of poles at the ends of curve is modified to fit the direction of tangent defined by two first points or two last points of walking line.
Also modified:
BOPAlgo_PaveFiller: modified methods PostTreatFF, RemoveUsedVertices - now unused vertices are included in the list of vertices to be absorbed by other ones.
Improve FindSubShape method in ShapeTool.
Update Expand compounds, according to changes in ShapeTool.
Add FindSubShape and AddSubShape commands for Draw.
Implementation of the method for simplification of the result of Boolean Operation on the API level.
The method BRepAlgoAPI_BuilderAlgo::SimplifyResult has been added, so the derived classes such as BooleanOpeation and Splitter can also use this method.
The result shape simplification should be called after the operation is done. The simplification is performed by the means of ShapeUpgrade_UnifySameDomain algorithm.
Draw command "bsimplify" has been added to control the simplification options.
Documentation for new functionality and draw commands controlling the options of Boolean operations.
Test cases for the new functionality.
Side-effect change:
The algorithms in Boolean component have been changed to use the BRepTools_History as a History tool.
Now it became possible to disable the collection of shapes modifications during Boolean Operations, which may be useful for performance sake (in draw the option is controlled by *setfillhistory* command).
Draw command "unifysamedom" has been changed to accept the angular tolerance in degrees instead of radians.
The reason of this issue is in incorrectly interpreted the generic class "TheExtPC" (eliminated after the fix 0024773) as Extrema_ExtPC2d. Correct interpretation must be "Extrema_EPCOfExtPC2d" class.
Now this problem has been fixed in the class Geom2dGcc_Circ2dTanCenGeo.
New testgrid "lowalgos 2dgcc" has been created.
1. Extrema algorithm calls Curve-surface intersector. This intersector returns flag about infinite solution (in spite of extrema's returning not-parallel status correctly - axes of considered cylinder and circle are not parallel). In this case, attempt of obtaining number of intersection points leads to exception.
So, the fix adds check of infinite solution after the intersection algorithm.
2. The methods IsDone(), IsParallel(), NbExt(), SquareDistance() and Points() (of Extrema_* classes) have been corrected to make them consistent to the documentation.
3. Revision of some Extrema_* classes has been made in order to avoid places with uninitialized variables.
4. Currently Extrema does not store any points in case when the arguments are parallel. It stores the distance only.
5. Some cases on Extrema-algo have been moved from "fclasses"-group to "modalg"-group.
Make the methods Append, Prepend, InsertBefore and InsertAfter, which take another sequence as an argument, copying the sequence instead of joining if the allocators are different.
Add test cases for collection classes.
1. Sphere is not V-periodic surface. See the section "Periodicity concept" written in frame of the fix 0029115. Therefore, applying ElCLib::AdjustPeriodic(...) method is unreasonable.
2. Default U work range of sphere is 0 ... 2*PI. Therefore, adjusting U parameter in range -PI/2 ... +PI/2 is unreasonable.
Substitution of degenerated edges by their copies is implemented to make edges not shared
in BRepPrimAPI_MakeRevol::Build().
Method BRepPrimAPI_MakeRevol::Generated(...) is changed in order to use history of substitutions.
Test case is added.
The Message_ProgressIndicator handle is added as a parameter to the function LU_Decompose and the the member functions of math_Gauss, Plate_Plate and GeomPlate_BuildPlateSurface classes.
Graphic3d_ClipPlane now can define a Chain of Planes (logical AND).
OpenGl_ShaderManager - added new GLSL sub-programs for clipping plane chains.
Bnd_Range::TrimFrom(), ::TrimTo() - added auxiliary methods for trimming the range.
SelectMgr_ViewClipRange now handles non-continuous clipping range.
Graphic3d_SequenceOfHClipPlane now aggregates NCollection_Sequence instead of inheritance.
OpenGl_CappingPlaneResource - triangulation has been adjusted to make front face following CCW order.
Added protection against clash of attributes with the same GUID when more than one attribute of the same type but with different GUIDs are stored in the file.
If attribute with default GUID has already been read, then adding next empty attribute of the same type (done at start of its reading) will fail; in such case another attempt is made with Null GUID.
Information on replacement of CDM_MessageDriver by Message_Messenger is added in the upgrade guide.
This replacement is recorded as rename in upgrade.dat
