DCAF require VISUALIZATION for correct work.
In some scenario DRAWEXE can generate a dublicates of the
internal static singletons. This means each dynamic library
will have their own instance of the static singleton.
Update all direct library loading to use the DCAF plugin
mechanism. This will ensure that the DCAF plugin is loaded
only once and that the correct instance is used.
Originally issue is reproduced only Linux with dlopen with "RTLD_LAZY".
Can be resolved additionally adding "RTLD_LAZY | RTLD_GLOBAL" for dlopen
This problem occurs because of obtaining 2 ALines which share same vertex on the seam edge.
There should be 2 different vertices with same(or almost the same) 3d parameters, but
with different UV parameters because of periodic surface.
Current fix allows to avoid the same vertices on seam edge and also checks the next vertex.
Added consideration of predicted next point to avoid skipping tha point which is not on seam edge.
Added test case for #33702
1. Modify method IntPatch_ALineToWLine::MakeWLine: add correction of end points of each line on 2 surfaces if an end point is a pole on a surface.
2. Modify method IntPatch_WLine::ComputeVertexParameters: adjust a point on curve to corresponding vertex the following way: set 3D point as the point of the vertex and 2D points as the points of the point on curve.
GeomInt/GeomInt_IntSS.cxx - handle flat cone case
IntPatch/IntPatch_Intersection.hxx, IntPatch/IntPatch_Intersection.cxx - method for preparing surfaces is added
bugs/lowalgos/intss/bug24772 - test case is changed according new behavior
GeomInt/GeomInt_IntSS.cxx, IntTools/IntTools_FaceFace.cxx - setting deflection 0.01
for case of two bspline surfaces
IntPolyh/IntPolyh_Intersection.cxx, IntPolyh/IntPolyh_Intersection.hxx - status IsParallel is added
BndLib/BndLib_Add3dCurve.cxx, IntTools/IntTools_TopolTool.cxx - fix small bugs
Correction of test scripts according to current behavior of algorithms
lowalgos/intss/bug32849 - test case added
IntPatch_ALineToWLine.cxx - setting minimal number of points in a WLine depending on step size
IntPatch_WLineTool.cxx - fix WLines connecting check condition
test cases has been changed according to new behavior
ApproxInt_Approx, ApproxInt_KnotTools, BRepApprox_Approx,
GeomInt_IntSS, IntTools_FaceFace:
Analysis of curvature is added for adjusting ParametrizationType
IntPatch_Intersection.cxx - adding methods for estimation of UV max step depending on used surfaces
GeomInt_IntSS.cxx, IntTools_FaceFace.cxx - using methods for max step estimation
Approx_SameParameter.cxx - adding control against big values.
BOPAlgo_PaveFiller_6.cxx - adjusting position of faces before intersection
IntPatch/IntPatch_WLineTool.cxx - adding control of maximal ratio of distances between 3 sequential points.
tests/bugs/modalg_7/bug32569 - new test case added
tests/lowalgos/intss/bug29972_1 test case is modified according new behavior of intersection algorithm
ApproxInt/ApproxInt_SvSurfaces.hxx : adding field myUseSolver in order to manage calculations of characteristics of intersection points.
ApproxInt/ApproxInt_MultiLine.gxx : implementation of using myUseSolver for treatment points of MultiLine.
ApproxInt/ApproxInt_ImpPrmSvSurfaces.gxx : implementation of using myUseSolver for case intersection of implicit and parametric surfaces.
Test cases added
IntPatch/IntPatch_ImpPrmIntersection.cxx - calculation of step depending on resolution of surface
IntWalk_IWalking_6.gxx - calculation of point-line coincidence is improved
Correction of tests according to current results
lowalgos/intss/bug30703 - new test case added
Adjusting parameters of algorithm depending on axes and parameters of cylinders is added in order to reduce computation time
Test case added: tests/lowalgos/intss/bug31552
tests/perf/modalg/bug26310_1: test case corrected according to current state of algorithm
Modification in static method BoundedArc of IntStart_SearchOnBoundaries:
add exact intersection of canonical curve-surface (when Func is IntPatch_ArcFunction).
draw_test_harness.md - description of new options in Draw commands
AppDef_BSplineCompute.hxx, BRepApprox_TheComputeLineOfApprox.hxx, GeomInt_TheComputeLineOfWLApprox.hxx, Approx_BSplComputeLine.gxx - implementation of method SetPeriodic(...) and implementation periodic boundary conditions for multiline in order to get periodic multicurve.
GeomAPI_PointsToBSplineSurface.hxx, GeomAPI_PointsToBSplineSurface.cxx - adding new parameter for methods Init(...) and Interpolate(...), implementation of building periodic tangents for first and last AppDef_MultiPointConstraint of multiline for U direction of surface.
GeometryTest_APICommands.cxx - implementation of new functionality in Draw command surfapp and surfint
GeomFill_NSections.cxx
Fixing problem with bugs modalg_3 bug606_2
1. Approx_ComputeCLine.gxx, Approx_FitAndDivide.hxx, Approx_FitAndDivide2d.hxx, BRepFill_ComputeCLine.hxx
It is base modification, which allows improve performance of approximation with help of Approx_ComputeCLine. The main idea of improvement is using degree selection by inverse order - from maxdegree to mindegree. If tolerance for maxdegree is not reached, there is no sense to make approximation for current number of knots with lower degree, it is necessary to cut parametric interval.
2. ProjLib_ComputeApprox, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ProjectOnPlane
It is additional modification of methods using Approx_ComputeCLine.
Mainly, modifications concern to more optimal choosing parameters for approximation algorithm.
3. BRepCheck_Face
Small improvement of method Intersect(...), which intersects two wires on face.
4. BRepTopAdaptor_FClass2d
Impovement of treatment infinitely narrow faces.
5. ChFi3d/ChFi3d_Builder_6.cxx
Small improvement, which forbids extension of singular boundary of surface.
It was TODO problem in tests/bugs/modalg_7/bug27711_3
6. IntTools_EdgeEdge.cxx
Improvement of performance for cases of searching common parts between line and analytical curve
7. GeomliteTest_CurveCommands.cxx
Adding Draw command fitcurve. This command is analog of approxcurve, but uses Approx_FitAndDivide algorithm.
Mainly to have direct draw command for testing Approx_ComputeCLine.
8. Extrema_ExtElC.cxx
Treatment of case "infinite solutions" for extrema line-ellipse
9. Modification of some tests according to new behavior of algorithm.
10. tests/perf/moddata/bug30435
Test for new improved algorithm.
11. Implementation QAcommand OCC30435 in QABugs_20.cxx used in test bug30435
Approx_ComputeCLine.gxx - criterium to stop interval cutting is increased.
ProjLib_ProjectedCurve.cxx - fix regression for bugs modalg_5 bug25886
Other tests are modified according to current state of algorithm
The reason of this problem is in wrong work of classifier algorithm (see the message ~0080992 to the issue #30354). Therefore, the algorithm of IntTools_FClass2d class has been improved. Namely, now orientation of the polygon is computed from area-criterion instead of angle. As result, some simplification of the method IntTools_FClass2d::Init(...) has been made.
<!break>
1. New constructor has been added to the class CSLib_Class2d. It allows applying TColgp_SequenceOfPnt2d.
2. DRAW-commands "addpolygonnode" and "polygonprops" have been created. They are covered by the test case "tests/geometry/2dpolygon/A1".
3. New method Poly::PolygonProperties(...) has been created. See help for detailed information.
4. New testgrid "lowalgos classifier" has been created.
If 2D-curves are requested in intersection result but they cannot be created (by some reason) then the full set of curves (3D and two 2D) is rejected from the intersection result.
1. New testgrid "lowalgos/intss" has been created. It will contain all test cases on geometrical intersection of two surfaces ("intersect" DRAW-command) and two faces ("bopcurves" DRAW-command).
2. New test case for the issue #28493 has been created because the problem is not reproduced on MASTER.
3. Test case (lowalgos/intss/bug24472) for the issue #29501 has been modified in order to check loops of the resulting intersection curves.
