OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-04-21 10:13:43 +03:00
Code
occt/dox/dev_guides/building/3rdparty/3rdparty_osx.md
abv 79d580f2ea 0024341: Document building OpenCL ICD Loader package 
- Building OpenCL ICD Loader documented; Acknowledgments section of Overview updated to mention also OpenGL and OpenCL
- Reference to OpenCL updated in Overview: use general statement instead of direct link to AMD SDK.
- GeForce 610, 6600, and Radeon HD 7870 added to list of tested graphic cards
- Minor syntax corrections in DRAW UG to avoid interferences
- Update 3rdparty products up to current state
- Redesign of pages
- Building OpenCL ICD Loader was documented for Linux platform
- Lists reformatted, documentation manual updated to better describe use of lists.
- Updating picture of structure of installed OCCT
- Updating description of Automake procedure
- Updating description of  CMake building procedure
2013-11-14 12:51:25 +04:00

219 lines
7.7 KiB
Markdown
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Building 3rd-party libraries on MacOS X {#dev_guides__building_3rdparty_osx}
==============================================
@tableofcontents
@section dev_guides__building_3rdparty_osx_1 Introduction
This document presents additional guidelines for building third-party products
used by Open CASCADE Technology and samples on Mac OS X platform (10.6.4 and later).
The links for downloading the third-party products are available
on the web site of OPEN CASCADE SAS at
http://www.opencascade.org/getocc/require/</a>.
There are two types of third-party products, which are necessary to build OCCT:
* Mandatory products: Tcl 8.5, Tk 8.5, FreeType 2.4.10
* Optional products: TBB 3.x or 4.x, gl2ps 1.3.5, FreeImage 3.14.1 or 3.15.x
@section dev_guides__building_3rdparty_osx_2 Building Mandatory Third-party Products
@subsection dev_guides__building_3rdparty_osx_2_1 Tcl/Tk 8.5
Tcl/Tk is required for DRAW test harness. Version 8.5 or 8.6 can be used with OCCT.
@subsubsection dev_guides__building_3rdparty_osx_2_1_1 Installation from binaries
It is possible to download ready-to-install binaries from
http://www.activestate.com/activetcl/downloads
1. Download the disk image to some TCL_DOWNLOAD_DIR.
2. Open in Finder the directory TCL_DOWNLOAD_DIR.
3. Open disk image and follow instructions.
@subsubsection dev_guides__building_3rdparty_osx_2_1_2 Installation from sources: Tcl 8.5
Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it.
1. Enter the macosx sub-directory of the directory where the source files of Tcl are located (TCL_SRC_DIR).
cd TCL_SRC_DIR/macosx
2. Run the configure command
configure --enable-gcc --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR
For a 64 bit platform also add --enable-64bit option to the command line.
3. If the configure command has finished successfully, start the building process
make
4. If building is finished successfully, start the installation of Tcl.
All binary and service files of the product will be copied to the directory defined by TCL_INSTALL_DIR
make install
@subsubsection dev_guides__building_3rdparty_osx_2_1_3 Installation from sources: Tk 8.5
Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it.
1. Enter the macosx sub-directory of the directory where the source files of Tk are located (TK_SRC_DIR).
cd TK_SRC_DIR/macosx
2. Run the configure command, where TCL_LIB_DIR is TCL_INSTALL_DIR/lib
configure --enable-gcc --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR --prefix=TK_INSTALL_DIR
where TCL_LIB_DIR is TCL_INSTALL_DIR/lib. For a 64 bit platform also add --enable-64bit option to the command line.
3. If the configure command has finished successfully, start the building process
make
4. If building has finished successfully, start the installation of Tk.
All binary and service files of the product will be copied to the directory
defined by TK_INSTALL_DIR (usually TK_INSTALL_DIR is TCL_INSTALL_DIR)
make install
@subsection dev_guides__building_3rdparty_osx_2_2 FreeType 2.4.10
FreeType is required for display of text in 3D viewer.
Download the necessary archive from http://sourceforge.net/projects/freetype/files/ and unpack it.
1. Enter the directory where the source files of FreeType are located (FREETYPE_SRC_DIR).
cd FREETYPE_SRC_DIR
2. Run the configure command
configure --prefix=FREETYPE_INSTALL_DIR
For a 64 bit platform also add CFLAGS='-m64 -fPIC' CPPFLAGS='-m64 -fPIC' option to the command line.
3. If the configure command has finished successfully, start the building process
make
4. If building has finished successfully, start the installation of FreeType.
All binary and service files of the product will be copied to the directory defined by FREETYPE_INSTALL_DIR
make install
@section dev_guides__building_3rdparty_osx_3 Building Optional Third-party Products
@subsection dev_guides__building_3rdparty_osx_3_1 TBB 3.x or 4.x
This third-party product is installed with binaries from the archive
that can be downloaded from http://threadingbuildingblocks.org/.
Go to \"Downloads / Commercial Aligned Release\", find the release version you need (e.g. tbb30_018oss)
and pick the archive for Mac OS X platform.
To install, unpack the downloaded archive of TBB 3.0 product (*tbb30_018oss_osx.tgz*).
@subsection dev_guides__building_3rdparty_osx_3_2 gl2ps 1.3.5
Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.
1. Install or build cmake product from source file.
2. Start cmake in GUI mode with the directory where the source files of fl2ps are located
ccmake GL2PS_SRC_DIR
1. Press [c] to make the initial configuration
2. Define the necessary options CMAKE_INSTALL_PREFIX
3. Press [c] to make the final configuration
4. Press [g] to generate Makefile and exit
or just run the following command:
cmake –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release
3. Start building of gl2ps
make
4. Start the installation of gl2ps. Binaries will be installed according to the CMAKE_INSTALL_PREFIX option
make install
@subsection dev_guides__building_3rdparty_osx_3_3 FreeImage 3.14.1 or 3.15.x
Download the necessary archive from
http://sourceforge.net/projects/freeimage/files/Source%20Distribution/
and unpack it. The directory with unpacked sources is further referred to as FREEIMAGE_SRC_DIR.
Note that for building FreeImage on Mac OS X 10.7 you should replace Makefile.osx
in FREEIMAGE_SRC_DIR by corrected one which you can find in attachment to issue #22811 in OCCT Mantis bug tracker
(http://tracker.dev.opencascade.org/file_download.php?file_id=6937&type=bug) or elsewhere.
1. If you are building FreeImage 3.15.x you can skip this step.
Modify FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h:
In line 60 insert the following:
#include string.h
Modify FREEIMAGE_SRC_DIR/Source/FreeImage/PluginTARGA.cpp:
In line 320 replace:
SwapShort(value);
with:
SwapShort(&value);
2. Enter the directory where the source files of FreeImage are located (FREEIMAGE_SRC_DIR).
cd FREEIMAGE_SRC_DIR
3. Run the building process
make
4. Run the installation process
1. If you have permissions to write to /usr/local/include and /usr/local/lib directories then run the following command:
make install
2. If you do not have permissions to write to /usr/include and /usr/lib directories
then you need to modify the file FREEIMAGE_SRC_DIR/Makefile.osx:
Change line 49 from:   
PREFIX ?= /usr/local
to:
PREFIX ?= $(PREFIX)
  Change lines 65-69 from:
install -d -m 755 -o root -g wheel $(INCDIR) $(INSTALLDIR)
install -m 644 -o root -g wheel $(HEADER) $(INCDIR)
install -m 644 -o root -g wheel $(SHAREDLIB) $(STATICLIB) $(INSTALLDIR)
ranlib -sf $(INSTALLDIR)/$(STATICLIB)
ln -sf $(SHAREDLIB) $(INSTALLDIR)/$(LIBNAME)
to:
install -d $(INCDIR) $(INSTALLDIR)
install -m 755 $(HEADER) $(INCDIR)
install -m 755 $(STATICLIB) $(INSTALLDIR)
install -m 755 $(SHAREDLIB) $(INSTALLDIR)
ln -sf $(SHAREDLIB) $(INSTALLDIR)/$(VERLIBNAME)
ln -sf $(VERLIBNAME) $(INSTALLDIR)/$(LIBNAME)
Then run the installation process by the following command:
make PREFIX=FREEIMAGE_INSTALL_DIR install
5. Clean the temporary files
make clean
View Git Blame Copy Permalink