OpenCascade/occt
1
0
Fork 0
mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-04-08 18:40:55 +03:00
Code Packages Releases Activity
occt/tests/bugs/modalg_6
History
nbv 6dc83e21b2 0026132: Invalid result of boolean operation 
1. The procedures for check of coincidence between Edge-Edge and Edge-Face have been added. These methods are used instead of searching interferences between corresponding sub-shapes. In most cases (including case for this issue), new methods are more reliable and faster than intersections. However, its use should be avoided in case when the edge is not coincide with edge/face of another argument evidently (e.g. if edge vertices are not in another edge/face).

2. Interface of both IntTools_EdgeFace and IntTools_EdgeEdge has been changed (adding/deleted some field and methods).

Some test cases have been corrected in accordance with their new behavior.
Test case for issue CR26132.
2016-01-21 15:50:29 +03:00
..
begin
0021821: Section of face by plane is not built due to small edges
2015-04-16 14:10:25 +03:00
bug7093
0007093: BRepLib::SameParameter() changes tolerance of shape, not involved into operation
2015-04-06 17:24:47 +03:00
bug21107
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug21351
0021351: Fail to compute derivatives of offset surface on trimmed surfaces on offsets on CN surfaces
2015-04-23 16:29:58 +03:00
bug21507
0021507: Bug in BOP: bcut produces invalid result without notice
2015-04-16 16:29:48 +03:00
bug21624
0021624: BRepFeat_SplitShape produce invalid shape
2015-04-23 16:34:15 +03:00
bug21670
0021670: BOP section produces bad result
2016-01-13 14:51:35 +03:00
bug21727
0021727: BRepBuilderAPI_Copy (and possibly other similar tools) create new shape in Frozen state
2015-04-30 14:11:07 +03:00
bug21821
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug21875
0021875: Section of face by plane produces invalid result
2016-01-21 15:50:23 +03:00
bug22644_1
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug22644_2
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug22644_3
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug22793
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug23138
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug23666
0023666: Wrong section curve between attached faces
2015-12-17 16:30:58 +03:00
bug24011
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug24097
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug24161
0024161: boolean operation hanging
2015-04-30 13:58:51 +03:00
bug24357
0026241: Sewing algorithm computes tolerance of joint vertex too rough
2015-06-18 14:04:52 +03:00
bug24417
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug24803
0024803: improve the result of v/v interference for two vertices case
2015-04-09 16:28:55 +03:00
bug24890
0024890: Result of uniform scaling is invalid
2015-11-19 14:15:15 +03:00
bug25271
0025271: Wrong result obtained by solid classifier algorithm
2015-05-08 08:51:46 +03:00
bug25342
0025342: [Regression] BRepAlgoAPI_Section returns wrong number of edges
2015-12-17 15:48:38 +03:00
bug25593
0025593: Number of intersection points for 2d curves depends on the order of arguments in command "2dintersect"
2015-04-16 10:34:12 +03:00
bug25613_1
0025613: Wrong distance found by xdistef command for attached shapes
2015-07-03 13:39:37 +03:00
bug25613_2
0025613: Wrong distance found by xdistef command for attached shapes
2015-07-03 13:39:37 +03:00
bug25820_1
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25820_2
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25820_3
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25844
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug25880
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug25890
0025890: Intersection algorithm produces curves overlaped
2015-05-08 08:51:43 +03:00
bug25908
0024682: Move out B-spline cache from curves and surfaces to dedicated classes BSplCLib_Cache and BSplSLib_Cache
2015-05-28 13:38:22 +03:00
bug25937_1
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug25937_2
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug25937_3
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26008
0026008: Wrong intersection 2D-curves obtained for pair of faces.
2015-04-09 16:12:05 +03:00
bug26010
0026010: [OCCT 6.8.0 regression] BRepFeat_SplitShape returns invalid shapes
2015-05-06 16:48:29 +03:00
bug26016
0026016: BRepPrimAPI_MakeRevol crash
2015-04-09 15:05:42 +03:00
bug26041
0026041: GeomLib_Tool::Parameter method fails
2015-04-16 11:30:11 +03:00
bug26063
0026063: GeomAPI_ExtremaCurveSurface have inexact API
2015-05-28 12:45:17 +03:00
bug26064
0026064: distmini of two edges locks up
2015-04-30 13:19:23 +03:00
bug26075
0026075: Make Extrema_GenExtCC return IsParallel flag in case of parallel curves
2015-06-04 14:14:52 +03:00
bug26080
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26098
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26099
0026099: Wrong result done by 2d intersection algorithm
2015-09-17 12:47:07 +03:00
bug26112
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26130
0026130: PCurve creation failure
2015-04-30 14:34:11 +03:00
bug26132
0026132: Invalid result of boolean operation
2016-01-21 15:50:29 +03:00
bug26151_1
0026151: Wrong result obtained by intersection algorithm.
2015-06-10 10:39:34 +03:00
bug26151_2
0026151: Wrong result obtained by intersection algorithm.
2015-06-10 10:39:34 +03:00
bug26152_1
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26152_2
0026152: Wrong result obtained by projection algorithm.
2015-04-30 14:37:40 +03:00
bug26173
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26180
0026180: Modeling Algorithms - Provide shape self-intersection detector
2015-05-28 12:19:25 +03:00
bug26185_1
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_2
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_3
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_4
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_5
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_6
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26185_7
0026185: BRepOffsetAPI_MakeOffset: regressions on some customer's cases
2015-05-28 15:26:35 +03:00
bug26188
0026188: Incorrect PCurve creation
2015-12-17 15:34:21 +03:00
bug26193
0026193: Incomplete intersection curve
2015-06-04 14:06:34 +03:00
bug26196
0026196: Wrong result obtained by projection algorithm.
2015-09-17 17:11:34 +03:00
bug26197
0026197: Incomplete intersection curve
2015-05-21 13:48:48 +03:00
bug26201
0026201: Wrong processing of dissymetric chamfer: order of chords unjustly changes
2015-05-21 13:57:51 +03:00
bug26202
0026202: Wrong result of chamfer on cylindrical surface: wrong value of chord
2015-05-14 17:05:38 +03:00
bug26206
0026206: BRepClass_FaceClassifier returns TopAbs_OUT for internal point
2015-06-04 14:35:36 +03:00
bug26208
0026193: Incomplete intersection curve
2015-06-04 14:06:34 +03:00
bug26218
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26224
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26233
0026233: BRepOffset_MakeOffset makes incorrect result
2015-06-04 12:41:48 +03:00
bug26241
0026241: Sewing algorithm computes tolerance of joint vertex too rough
2015-06-18 14:04:52 +03:00
bug26243_1
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26243_2
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26243_3
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26251
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26253
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26281_1
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-06-04 14:03:08 +03:00
bug26281_2
0026281: BRepCheck_Edge::Tolerance() raises exception on the given shapes
2015-06-04 14:03:08 +03:00
bug26288
0026288: Offset on faces with opposite orientation
2015-09-10 16:22:45 +03:00
bug26296_1
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26296_2
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26296_3
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26296_4
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26296_5
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26305_1
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26305_2
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26305_3
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26308
0026308: Segmentation fault in BSplCLib::LocateParameter
2015-07-20 15:24:00 +03:00
bug26310_1
0026310: Very slow boolean cut operations on cylinders
2015-07-22 16:11:31 +03:00
bug26310_2
0026310: Very slow boolean cut operations on cylinders
2015-07-22 16:11:31 +03:00
bug26310_3
0026310: Very slow boolean cut operations on cylinders
2015-07-22 16:11:31 +03:00
bug26310_4
0021564: Intersection of two planar faces produces curve with too many poles
2015-08-13 11:04:48 +03:00
bug26313
0026313: Method BRepBuilderAPI_GTransform::ModifiedShape(...) thows exception
2015-09-10 16:19:23 +03:00
bug26315
0026305: BRepFeat_MakePrism returns inconsistent results && 026315: BRepFeat_MakeRevol fails to create revol from shape
2015-06-18 13:37:13 +03:00
bug26316
0026316: Infinite modification of the shapes in General Fuse operation
2015-06-25 12:51:30 +03:00
bug26327
0026327: Performance degradation from version 6.8.0 on Boolean operations
2015-12-17 15:26:15 +03:00
bug26330
0026330: BRepOffsetAPI_ThruSections creates invalid shape
2015-06-25 13:10:30 +03:00
bug26332
0026332: BRepOffsetAPI_ThruSections algorithm fails on two wires with different number of edges
2015-07-02 13:47:37 +03:00
bug26334
0026334: BRepOffsetAPI_MakePipeShell returns the wrong shape
2015-12-17 15:41:31 +03:00
bug26352
0026352: Wrong intersection points found
2015-07-02 14:28:55 +03:00
bug26354
0026354: Invalid result of General Fuse on wire and face
2015-12-25 10:21:33 +03:00
bug26356
0026356: Wrong result done by projection algorithm
2015-07-09 14:14:55 +03:00
bug26379_1
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26379_2
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26387
0026387: BRepPrimAPI_MakePrism crash when extruding Paraboloid face.
2015-07-20 14:08:18 +03:00
bug26393
0026393: Add draw commands to evaluate history of modifications of BOP
2015-07-28 17:59:13 +03:00
bug26396
0026396: Taper API result differs run-to-run for identical inputs
2015-10-08 10:35:08 +03:00
bug26406
0026406: BRepPrimAPI_MakeRevol crash when rotating Paraboloid face.
2015-07-20 15:01:16 +03:00
bug26418_1
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_2
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_3
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26418_4
0026418: Unjustified limitation on tolerance of a input shape in BRepOffset_MakeOffset
2015-07-21 11:20:27 +03:00
bug26420_1
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26420_2
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26420_3
0026420: BOPAlgo_Builder resets "Closed" flag in the result
2015-07-29 15:30:42 +03:00
bug26426
0026426: Draft angle algorithm modifies input argument + the result of the operation have very large tolerance values
2015-10-29 13:36:17 +03:00
bug26427
0026427: Draft angle algorithm produces wrong shape
2015-12-17 14:52:19 +03:00
bug26431_1
0026431: Can't cut a sphere from a cylinder
2015-12-04 13:15:04 +03:00
bug26431_2
0026431: Can't cut a sphere from a cylinder
2015-12-04 13:15:04 +03:00
bug26431_3
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26440_1
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26440_2
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26440_3
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26442_1
0026442: Access violation in BRepOffset_MakeOffset
2015-08-06 12:23:59 +03:00
bug26442_2
0026442: Access violation in BRepOffset_MakeOffset
2015-08-06 12:23:59 +03:00
bug26443_1
0026443: Offset surface hangs up
2015-10-15 14:16:14 +03:00
bug26443_2
0026443: Offset surface hangs up
2015-10-15 14:16:14 +03:00
bug26444
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26446
Adjusting testing case
2015-08-21 13:19:25 +03:00
bug26447
0026447: Performance degradation intersecting cylindrical surfaces
2015-07-30 13:52:38 +03:00
bug26464
026464: BRepOffset_MakeOffset does not provide valid output
2015-07-29 16:15:25 +03:00
bug26466
0026466: UnifySameDomain creates invalid result shape from valid input shape
2015-07-28 17:59:16 +03:00
bug26470_1
0026470: BRepFill_Evolved: exception and invalid result
2015-10-22 15:43:33 +03:00
bug26470_2
0026470: BRepFill_Evolved: exception and invalid result
2015-10-22 15:43:33 +03:00
bug26473_1
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26473_2
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26481
0026540: Errors in BRepOffsetAPI_MakeOffset: infinite loop in method FixHoles for closed results.
2015-08-13 11:16:09 +03:00
bug26484
0026484: BRepExtrema_DistShapeShape hangs
2015-07-29 16:04:54 +03:00
bug26496
0026496: Error in use the BRepCheck_Analyzer
2015-07-30 12:40:05 +03:00
bug26498
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26513
0026513: Offset API not returning result (seems to be "hanging")
2016-01-13 14:55:23 +03:00
bug26523
0026523: Wrong result of section algorithm
2015-12-17 16:15:03 +03:00
bug26525_1
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26525_2
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26525_3
0026252: GeomAdaptor_Surface should use inner adaptor to calculate values of complex surfaces
2015-11-19 14:50:54 +03:00
bug26525_4
0026525: Wrong result obtained by curve / surface intersection algorithm.
2015-09-24 14:14:57 +03:00
bug26535
0026535: Boolean Cut does not work on shell and solids
2015-12-25 10:21:30 +03:00
bug26540
0026540: Errors in BRepOffsetAPI_MakeOffset: infinite loop in method FixHoles for closed results.
2015-08-13 11:16:09 +03:00
bug26553
0026553: Out of range exception in BRepFill_Pipe::FindEdge
2015-08-20 16:43:39 +03:00
bug26554
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26556_1
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_2
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_3
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26556_4
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26565_1
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_2
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_3
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_4
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_5
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_6
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_7
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26565_8
0026565: Compsolid after cut becomes compound of solids
2015-10-01 14:49:29 +03:00
bug26567
0026567: Exception in Boolean intersection command
2015-09-17 17:00:51 +03:00
bug26575
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26576_1
0027026: Modeling -- Improve AppCont_LeastSquare::AppCont_LeastSquare::FixSingleBorderPoint()
2015-12-23 12:22:16 +03:00
bug26576_2
0026576: Wrong result obtained by intersection algorithm.
2015-12-17 18:01:56 +03:00
bug26576_3
0027026: Modeling -- Improve AppCont_LeastSquare::AppCont_LeastSquare::FixSingleBorderPoint()
2015-12-23 12:22:16 +03:00
bug26576_4
0026576: Wrong result obtained by intersection algorithm.
2015-12-17 18:01:56 +03:00
bug26580_1
0026580: BRepProj_Projection does not provide any results
2015-12-25 10:21:31 +03:00
bug26580_2
0026580: BRepProj_Projection does not provide any results
2015-12-25 10:21:31 +03:00
bug26582
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26587
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26588
0026588: SIGSEGV in BRepFeat_MakeDPrism::Perform()
2015-09-17 17:01:33 +03:00
bug26607
0026607: Wrong value of area.
2015-10-01 13:49:24 +03:00
bug26609
0026609: Wrong result obtained by solid classifier algorithm.
2015-10-08 13:29:04 +03:00
bug26616
Final updates before release
2015-12-25 10:29:11 +03:00
bug26619
0026619: Tolerances of operands are modified using bop
2015-12-23 10:33:43 +03:00
bug26621
0026742: Update test cases for using checknbshapes procedure instead of global variables
2015-10-08 10:54:30 +03:00
bug26627
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26636
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26640
0026640: ShapeFix_Edge::FixAddPCurve problem in OCC 6.8
2015-09-17 12:50:58 +03:00
bug26647
0026647: BRepTools::UVBounds() computes zero range by V
2015-09-10 16:31:40 +03:00
bug26674
0026674: Performance regression in BRepExtrema_DistShapeShape in OCCT 6.9.0 in compare with OCCT 6.7.1
2015-09-17 17:01:29 +03:00
bug26675
0026431: Can't cut a sphere from a cylinder
2015-12-04 13:15:04 +03:00
bug26681
0026681: BRepPrimAPI_MakeRevol creates faulty shape
2015-11-19 14:22:54 +03:00
bug26684_1
0026684: Big tolerance values of the intersection curves
2016-01-13 15:19:06 +03:00
bug26684_2
0026684: Big tolerance values of the intersection curves
2016-01-13 15:19:06 +03:00
bug26687
0026622: Tests - Avoid using dlog and decho commands in test scripts
2015-10-15 11:43:54 +03:00
bug26699
0026699: Wrong section curves
2015-10-29 14:02:13 +03:00
bug26701
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26717
0026717: Error in IntPatch_PrmPrmIntersection: change of local resolution leads to break of walking line
2015-10-08 10:24:07 +03:00
bug26718
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26736_1
0026736: Errors in BRepOffsetAPI_MakeOffset: overlapping arcs are processed incorrect in mode GeomAbs_Intersection
2015-10-15 12:08:15 +03:00
bug26736_2
0026736: Errors in BRepOffsetAPI_MakeOffset: overlapping arcs are processed incorrect in mode GeomAbs_Intersection
2015-10-15 12:08:15 +03:00
bug26744
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26746
0026746: Method gp_Torus::Coefficients(...) returns incorrect value.
2015-10-15 12:48:28 +03:00
bug26750
0026750: Method IsNormal(...) for gp_Vec2d returns FALSE if the angle between two vectors is equal to -90 degree (-M_PI/2 radian)
2015-10-08 10:17:03 +03:00
bug26757_1
0026757: Wrong history of a fillet
2015-11-05 12:14:03 +03:00
bug26757_2
0026757: Wrong history of a fillet
2015-11-05 12:14:03 +03:00
bug26775
0025945: Make stable checking of shape global properties in tests
2015-12-10 16:56:03 +03:00
bug26841_1
0026841: Boolean operation "bsection" produce invalid result on the attached cases
2015-12-17 17:12:04 +03:00
bug26841_2
0026841: Boolean operation "bsection" produce invalid result on the attached cases
2015-12-17 17:12:04 +03:00
bug26848
Adding checks in test cases
2015-12-20 14:49:14 +03:00
bug26896_1
0026896: Wrong result of bsection algorithm
2015-12-17 15:18:02 +03:00
bug26896_2
0026896: Wrong result of bsection algorithm
2015-12-17 15:18:02 +03:00
bug26896_3
0026896: Wrong result of bsection algorithm
2015-12-17 15:18:02 +03:00
bug26897
0026897: BRepBuilderAPI_Copy does not copy polygons
2015-11-27 10:08:18 +03:00
bug26914
0026914: [Regression 7.0alpha] Hang in surface approximation
2015-11-27 10:08:45 +03:00
bug26923
0026923: Operation CUT leads to faulty shape
2016-01-13 14:37:17 +03:00
bug26952_1
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26952_2
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26953_1
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26953_2
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26953_3
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26953_4
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26954_1
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26954_2
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26954_3
0026619: Tolerances of operands are modified using bop
2015-12-23 10:33:43 +03:00
bug26954_4
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26954_5
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26955
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug26971
Modification of test cases in accordance with changes of issue 25945
2015-12-11 11:35:18 +03:00
bug27002_1
27002: Test cases for Set-42
2016-01-13 15:06:57 +03:00
bug27002_2
27002: Test cases for Set-42
2016-01-13 15:06:57 +03:00
bug27010
0027010: Wrong classification of the point relatively the solid
2015-12-22 14:36:51 +03:00
bug27021
0027021: TopExp::Vertices performance optimization
2016-01-13 14:41:49 +03:00
bug27032
0027032: [Regression to 6.9.1] Result of bcut has the same volume as the object
2016-01-13 15:49:03 +03:00
bug27045_1
0027045: firsthole & holend commands work incorrectly
2016-01-15 11:13:23 +03:00
bug27045_2
0027045: firsthole & holend commands work incorrectly
2016-01-15 11:13:23 +03:00
bug27085_1
0027085: ShapeUpgrade_UnifySameDomain very large performance difference for seemingly similar shapes
2016-01-21 15:50:28 +03:00
bug27085_2
0027085: ShapeUpgrade_UnifySameDomain very large performance difference for seemingly similar shapes
2016-01-21 15:50:28 +03:00