mirror of https://git.dev.opencascade.org/repos/occt.git synced 2025-04-04 18:06:22 +03:00

abv 79d580f2ea 0024341: Document building OpenCL ICD Loader package

- Building OpenCL ICD Loader documented; Acknowledgments section of Overview updated to mention also OpenGL and OpenCL
- Reference to OpenCL updated in Overview: use general statement instead of direct link to AMD SDK.
- GeForce 610, 6600, and Radeon HD 7870 added to list of tested graphic cards
- Minor syntax corrections in DRAW UG to avoid interferences
- Update 3rdparty products up to current state
- Redesign of pages
- Building OpenCL ICD Loader was documented for Linux platform
- Lists reformatted, documentation manual updated to better describe use of lists.
- Updating picture of structure of installed OCCT
- Updating description of Automake procedure
- Updating description of  CMake building procedure

2013-11-14 12:51:25 +04:00

8.8 KiB

Raw Blame History

Building 3rd-party libraries on Linux

@tableofcontents

@section dev_guides__building_3rdparty_linux_1 Introduction

This document presents additional guidelines for building third-party products used by Open CASCADE Technology and samples on Linux platform.

The links for downloading the third-party products are available on the web site of OPEN CASCADE SAS at http://www.opencascade.org/getocc/require/.

There are two types of third-party products, which are necessary to build OCCT:

Mandatory products: Tcl/Tk 8.5 - 8.6 and FreeType 2.4.10 - 2.4.11
Optional products: TBB 3.x - 4.x, gl2ps 1.3.5 - 1.3.8, FreeImage 3.14.1 - 3.15.4

@section dev_guides__building_3rdparty_linux_2 Building Mandatory Third-party Products

@subsection dev_guides__building_3rdparty_linux_2_1 Tcl/Tk

Tcl/Tk is required for DRAW test harness.

@subsubsection dev_guides__building_3rdparty_linux_2_1_1 Installation from binaries:

It is possible to download ready-to-install binaries from http://www.activestate.com/activetcl/downloads

Download the binaries archive and unpack them to some TCL_SRC_DIR.
Enter the directory TCL_SRC_DIR.
```
cd TCL_SRC_DIR
```
Run the install command
```
install.sh
```
and follow instructions.

@subsubsection dev_guides__building_3rdparty_linux_2_1_2 Installation from sources: Tcl

Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it.

Enter the unix sub-directory of the directory where the source files of Tcl are located (TCL_SRC_DIR).
```
cd TCL_SRC_DIR/unix   
```
Run the configure command
```
configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR   
```
For a 64 bit platform also add --enable-64bit option to the command line.
If the configure command has finished successfully, start the building process
```
make   
```
If building is finished successfully, start the installation of Tcl. All binary and service files of the product will be copied to the directory defined by TCL_INSTALL_DIR
```
make install   
```

@subsubsection dev_guides__building_3rdparty_linux_2_1_3 Installation from sources: Tk

Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it.

Enter the unix sub-directory of the directory where the source files of Tk are located (TK_SRC_DIR).
```
cd TK_SRC_DIR/unix   
```
Run the configure command, where TCL_LIB_DIR is TCL_INSTALL_DIR/lib
```
configure --enable-gcc  --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR  --prefix=TK_INSTALL_DIR   
```
where TCL_LIB_DIR is TCL_INSTALL_DIR/lib

For a 64 bit platform also add --enable-64bit option to the command line.
If the configure command has finished successfully, start the building process
```
make   
```
If building has finished successfully, start the installation of Tk. All binary and service files of the product will be copied to the directory defined by TK_INSTALL_DIR (usually TK_INSTALL_DIR is TCL_INSTALL_DIR)
```
make install   
```

@subsection dev_guides__building_3rdparty_linux_2_2 FreeType

FreeType is required for display of text in 3D viewer. Download the necessary archive from http://sourceforge.net/projects/freetype/files/ and unpack it.

Enter the directory where the source files of FreeType are located (FREETYPE_SRC_DIR).
```
cd FREETYPE_SRC_DIR   
```
Run the configure command
```
configure  --prefix=FREETYPE_INSTALL_DIR   
```
For a 64 bit platform also add CFLAGS='-m64 -fPIC' CPPFLAGS='-m64 -fPIC' option to the command line.
If the configure command has finished successfully, start the building process
```
make   
```
If building has finished successfully, start the installation of FreeType. All binary and service files of the product will be copied to the directory defined by FREETYPE_INSTALL_DIR
```
make install   
```

@section dev_guides__building_3rdparty_linux_3 Building Optional Third-party Products

@subsection dev_guides__building_3rdparty_linux_3_1 TBB

This third-party product is installed with binaries from the archive that can be downloaded from http://threadingbuildingblocks.org. Go to "Downloads page", find the release version you need and pick the archive for Linux platform. To install, unpack the downloaded archive of TBB product.

@subsection dev_guides__building_3rdparty_linux_3_2 gl2ps

Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.

Install or build cmake product from source file.
Start cmake in GUI mode with the directory where the source files of gl2ps are located:
```
ccmake GL2PS_SRC_DIR   
```
a. Press [c] to make the initial configuration b. Define the necessary options CMAKE_INSTALL_PREFIX c. Press [c] to make the final configuration d. Press [g] to generate Makefile and exit

or just run the following command:
```
cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
```
Start building of gl2ps
```
make   
```
Start the installation of gl2ps. Binaries will be installed according to the CMAKE_INSTALL_PREFIX option
```
make install   
```

@subsection dev_guides__building_3rdparty_linux_3_3 FreeImage

Download the necessary archive from http://sourceforge.net/projects/freeimage/files/Source%20Distribution/ and unpack it. The directory with unpacked sources is further referred to as FREEIMAGE_SRC_DIR.

Modify FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h: In line 60 insert the following:
```
#include string.h   
```
Enter the directory where the source files of FreeImage are located (FREEIMAGE_SRC_DIR).
```
cd FREEIMAGE_SRC_DIR   
```
Run the building process
```
make   
```

Run the installation process

a. If you have permissions to write to /usr/include and /usr/lib directories then run the following command:

   make install

b. If you don’t have permissions to write to /usr/include and /usr/lib directories then you need to modify the file FREEIMAGE_SRC_DIR/Makefile.gnu:

Change lines 7-9 from:

   DESTDIR ?= /   
   INCDIR  ?= $(DESTDIR)/usr/include   
   INSTALLDIR  ?= $(DESTDIR)/usr/lib

to:

   DESTDIR  ?= $(DESTDIR)   
   INCDIR  ?= $(DESTDIR)/include   
   INSTALLDIR  ?= $(DESTDIR)/lib

Change lines 65-67 from:

   install  -m 644 -o root -g root $(HEADER) $(INCDIR)   
   install  -m 644 -o root -g root $(STATICLIB) $(INSTALLDIR)   
   install  -m 755 -o root -g root $(SHAREDLIB) $(INSTALLDIR)

to:

   install  -m 755 $(HEADER) $(INCDIR)   
   install  -m 755 $(STATICLIB) $(INSTALLDIR)   
   install  -m 755 $(SHAREDLIB) $(INSTALLDIR)

Change line 70 from:

   ldconfig

to:

   \#ldconfig

Then run the installation process by the following command:

 make DESTDIR=FREEIMAGE_INSTALL_DIR  install

Clean the temporary files
```
 make clean   
```

@subsection dev_guides__building_3rdparty_linux_3_4 OpenCL ICD Loader

If you have OpenCL SDK (one provided by Apple, AMD, NVIDIA, Intel, or other vendor) installed on your system, you should find OpenCL headers and libraries required for building OCCT inside that SDK.

Alternatively, you can use OpenCL ICD (Installable Client Driver) Loader provided by Khronos group. The following describes steps used to build OpenCL ICD Loader version 1.2.11.0.

Download OpenCL ICD Loader sources archive and OpenCL header files from Khronos OpenCL Registry http://www.khronos.org/registry/cl/
Unpack the archive and put headers in inc/CL sub-folder
Print make in root of unpacked archive to compile OpenCL libraries.
Create installation folder for OpenCL IDL Loader package and put there:
1. OpenCL header files in include/CL subfolder
2. libOpenCL.so (generated in bin subfolder of source package) in lib subfolder

@section dev_guides__building_3rdparty_linux_4 Installation From Official Repositories

@subsection dev_guides__building_3rdparty_linux_4_1 Debian-based distributives

All 3rd-party products required for building of OCCT could be installed from official repositories. You may install them from console using apt-get utility:

sudo apt-get install \   
tcllib tklib tcl-dev tk-dev \   
libfreetype-dev \   
libxt-dev libxmu-dev \   
libgl1-mesa-dev \   
libfreeimage-dev \   
libtbb-dev \   
libgl2ps-dev

To launch WOK-prebuilt binaries you need install C shell and 32-bit libraries on x86_64 distributives:

sudo apt-get install \   
csh \   
libstdc++5:i386 libxt6:i386

Any compliant C++ compiler is required for building anyway:

sudo apt-get install \   
g++

8.8 KiB Raw Blame History Unescape Escape

Building 3rd-party libraries on Linux

8.8 KiB

Raw Blame History