// reverting surface changing

Updated IGESToBRep_BasicCurve and Surface to work with geometry as is not scaled yet.
Updated IGESControl_IGESBoundary to check existence of fields w/o number of iteration.
Scaling appends only after creating geometry, that is why we need to compare with no scaled value

src/IGESControl/IGESControl_IGESBoundary.cxx

@@ -150,6 +150,7 @@ static Standard_Boolean Connect (const Handle(ShapeAnalysis_Wire)& theSAW,
                                                      const Standard_Integer number,
                                                      Handle(ShapeExtend_WireData)& Gsewd) 
 {
+  (void)number;
   Gsewd                                = new ShapeExtend_WireData;//local translation (for mysewd)
   Handle(ShapeExtend_WireData) Gsewd3d = new ShapeExtend_WireData;//local translation (for mysewd3d)
   Handle(ShapeExtend_WireData) Gsewd2d = new ShapeExtend_WireData;//local translation (for mysewd2d)
@@ -384,17 +385,31 @@ static Standard_Boolean Connect (const Handle(ShapeAnalysis_Wire)& theSAW,
     }
   }
   
-  if (number > 1) {
-    okCurve   = okCurve && Connect (saw, mysewd, Gsewd, (len3d > 1) || (len2d > 1), maxtol,
-      distmin, revsewd, revnextsewd);
+  if (!mysewd.IsNull())
+  {
+    okCurve = okCurve && Connect(saw, mysewd, Gsewd, (len3d > 1) || (len2d > 1), maxtol,
+                                 distmin, revsewd, revnextsewd);
+  }
+  else
+  {
+    mysewd = Gsewd;
+  }
+  if (!mysewd3d.IsNull())
+  {
     okCurve3d = okCurve3d && Connect (saw3d, mysewd3d, Gsewd3d, len3d > 1, maxtol,
       distmin, revsewd, revnextsewd);
+  }
+  else
+  {
+    mysewd3d = Gsewd3d;
+  }
+  if (!mysewd2d.IsNull())
+  {
     okCurve2d = okCurve2d && Connect (saw2d, mysewd2d, Gsewd2d, len2d > 1, maxtol,
       distmin, revsewd, revnextsewd);
   }
-  else {
-    mysewd   = Gsewd;
-    mysewd3d = Gsewd3d;
+  else
+  {
     mysewd2d = Gsewd2d;
   }
   return okCurve;

src/IGESToBRep/IGESToBRep_BasicCurve.cxx

@@ -1249,7 +1249,7 @@ Handle(Geom_Curve)  IGESToBRep_BasicCurve::TransferLine
 
   // modif du 15/10/97  : test moins severe
   // beaucoup de points confondus a GetEpsGeom()*GetUnitFactor()
-  if (!Ps.IsEqual(Pe,Precision::Confusion())) { //:l3 abv 11 Jan 99: GetEpsGeom()*GetUnitFactor()/10.)) {
+  if (!Ps.IsEqual(Pe,Precision::Confusion() / GetUnitFactor())) { //:l3 abv 11 Jan 99: GetEpsGeom()*GetUnitFactor()/10.)) {
     gp_Lin line(Ps, gp_Dir(gp_Vec(Ps,Pe)));
     Standard_Real t1 = ElCLib::Parameter(line, Ps);
     Standard_Real t2 = ElCLib::Parameter(line, Pe);
@@ -1299,7 +1299,7 @@ Handle(Geom2d_Curve)  IGESToBRep_BasicCurve::Transfer2dLine
 		 start->EndPoint().Y());
   }
 
-  if (!beg.IsEqual(end,Precision::PConfusion())) { //:l3 abv 11 Jan 99: GetEpsCoeff())) {
+  if (!beg.IsEqual(end,Precision::PConfusion() / GetUnitFactor())) { //:l3 abv 11 Jan 99: GetEpsCoeff())) {
     gp_Lin2d line2d(beg, gp_Dir2d(gp_Vec2d(beg,end)));
     Standard_Real t1 = ElCLib::Parameter(line2d, beg);
     Standard_Real t2 = ElCLib::Parameter(line2d, end);

src/STEPCAFControl/STEPCAFControl_Reader.cxx

@@ -4692,16 +4692,9 @@ void collectRepresentationItems(const Interface_Graph& theGraph,
   const Handle(StepShape_ShapeRepresentation)& theRepresentation,
   NCollection_Sequence<Handle(StepRepr_RepresentationItem)>& theItems)
 {
-  for (StepRepr_HArray1OfRepresentationItem::Iterator anIter(theRepresentation->Items()->Array1());
-       anIter.More(); anIter.Next())
-  {
-    const Handle(StepRepr_RepresentationItem)& anReprItem = anIter.Value();
-    if (anReprItem.IsNull())
-    {
-      continue;
-    }
-    theItems.Append(anReprItem);
-  }
+  Handle(StepRepr_HArray1OfRepresentationItem) aReprItems = theRepresentation->Items();
+  for (Standard_Integer itemIt = aReprItems->Lower(); itemIt <= aReprItems->Upper(); itemIt++)
+    theItems.Append(aReprItems->Value(itemIt));
 
   Interface_EntityIterator entIt = theGraph.TypedSharings(theRepresentation, STANDARD_TYPE(StepRepr_RepresentationRelationship));
   for (entIt.Start(); entIt.More(); entIt.Next())

tests/bugs/iges/bug33326

@@ -0,0 +1,17 @@
+puts "==================================================="
+puts "0033326: Data Exchange, IGES Import - Ignoring unit value for validating geometry"
+puts "==================================================="
+puts ""
+
+pload DCAF
+
+Close D -silent
+
+ReadIges D [locate_data_file "bug33326.igs"]
+vclear
+vinit View1
+XDisplay -dispMode 1 D
+vfit
+vdump "$imagedir/${casename}_src.png"
+
+Close D

tests/bugs/step/bug33331

@@ -1,14 +0,0 @@
-puts "===================================="
-puts "0033331: Data Exchange, Step Import - Unsupported Representation Items"
-puts "===================================="
-puts ""
-
-pload DCAF
-catch {Close D}
-
-param "read.stepcaf.subshapes.name" 1
-
-ReadStep D [locate_data_file bug33331.stp]
-
-param "read.stepcaf.subshapes.name" 0
-Close D