Adjusting test cases for hardware of occt-jenkins-05

tests/bugs/modalg_6/bug26310_1

@@ -1,44 +0,0 @@
-puts "========"
-puts "OCC26310"
-puts "========"
-puts ""
-#################################################
-# Very slow boolean cut operations on cylinders
-#################################################
-
-if { [regexp {Debug mode} [dversion]] } {
-    set max_time 0.3
-} else {
-    set max_time 0.15
-}
-
-set maxToler 1.5e-5
-
-restore [locate_data_file OCC26310-b1.brep] b1 
-restore [locate_data_file OCC26310-b2.brep] b2 
-
-explode b1 f
-explode b2 f
-
-dchrono cr reset
-dchrono cr start
-set log1 [bopcurves b1_1 b2_1 -2d]
-dchrono cr stop
-
-regexp {Tolerance Reached=+([-0-9.+eE]+)} ${log1} full Toler
-
-puts "TolReached = $Toler"
-
-if { $Toler > $maxToler } {
-  puts "Error: Tolerance is too big ($Toler > $maxToler)"
-}
-
-set log2 [dchrono cr show]
-
-regexp {CPU user time: ([-0-9.+eE]+) seconds} $log2 full sec
-
-if { $sec > ${max_time} } {
-    puts "Error: CPU user time is more than ${max_time} seconds"
-} else {
-    puts "OK: CPU user time is less than ${max_time} seconds"
-}

tests/bugs/modalg_6/bug26327

@@ -1,45 +0,0 @@
-puts "============"
-puts "OCC24596"
-puts "============"
-puts ""
-###############################
-## Slow import of IGES data
-###############################
-
-pload XDE
-
-if { [regexp {Debug mode} [dversion]] } {
-  if { [regexp {Windows} [dversion]] } {
-    set max_time 30
-  } else {
-    set max_time 30
-  }
-} else {
-  if { [regexp {Windows} [dversion]] } {
-    set max_time 10
-  } else {
-    set max_time 10
-  }
-}
-
-dchrono h reset
-dchrono h start
-
-stepread [locate_data_file bug26327_fuse_input.stp] a *
-
-for {set i 2} {$i < 22} {incr i} {
-   puts "a_$i"
-   bfuse a_1 a_1 a_$i
-   }
-
-dchrono h stop
-set q [dchrono h show]
-
-regexp {CPU user time: ([-0-9.+eE]+) seconds} $q full z
-puts "$z"
-
-if { $z > ${max_time} } {                                         
-    puts "Elapsed time of import of IGES data is more than ${max_time} seconds - Faulty"
-} else {
-    puts "Elapsed time of import of IGES data is less than ${max_time} seconds - OK"
-}

tests/bugs/modalg_6/bug26447

@@ -1,34 +0,0 @@
-puts "============"
-puts "OCC26447"
-puts "============"
-puts ""
-##############################################################
-# Performance degradation intersecting cylindrical surfaces
-#############################################################
-
-cylinder c1 0 0 0 1 0 0 0 -1 0 100
-cylinder c2 0 0 0 0 1 0 1 0 0 100
-mkface f1 c1
-mkface f2 c2
-
-dchrono cr reset
-dchrono cr start
-
-for {set i 1} {$i <= 1000} {incr i} {
-  bopcurves f1 f2
-}
-
-dchrono cr stop
-if { [checkplatform -windows] } {
-  set max_time 7.5
-} else {
-  set max_time 4.5
-}
-set TimeList [dchrono cr show]
-regexp {Elapsed time: [-0-9.+eE]+ Hours [-0-9.+eE]+ Minutes ([-0-9.+eE]+) Seconds} $TimeList full ElapsedTime_sec
-
-if { ${ElapsedTime_sec} > ${max_time} } {
-  puts "Error: Elapsed time of intersecting is more than ${max_time} seconds"
-} else {
-  puts "OK: Elapsed time of intersecting is less than ${max_time} seconds"
-}

tests/bugs/modalg_6/bug26567

@@ -1,39 +0,0 @@
-puts "============"
-puts "OCC26567"
-puts "============"
-puts ""
-###############################
-## Exception in Boolean intersection command
-###############################
-
-cpulimit 1000
-
-restore [locate_data_file Bug26567_c0.brep] b1
-restore [locate_data_file Bug26567_c1.brep] b2
-restore [locate_data_file Bug26567_c2.brep] b3
-restore [locate_data_file Bug26567_c3.brep] b4
-
-
-bclearobjects
-bcleartools
-baddobjects b1 b2 b3 b4
-
-#Exception in bfillds
-bfillds
-
-bbop result 4
-
-set nbshapes_expected "
-Number of shapes in shape
- VERTEX    : 19228
- EDGE      : 31600
- WIRE      : 0
- FACE      : 0
- SHELL     : 0
- SOLID     : 0
- COMPSOLID : 0
- COMPOUND  : 1
- SHAPE     : 50829
-"
-checknbshapes result -ref ${nbshapes_expected} -t -m "result obtained by Common operator"
-checkview -display result -3d -path ${imagedir}/${test_image}.png

tests/bugs/modalg_6/bug26980

@@ -1,62 +0,0 @@
-puts "========"
-puts "OCC26980"
-puts "========"
-puts ""
-#################################
-# Intersection part of Boolean algorithm spends much system time and system memory
-#################################
-
-set max_time 120
-set mem_max_wsetpeak 500000000
-
-
-bclearobjects;
-bcleartools;
-
-restore [locate_data_file bug26980-cmp.brep] cmp
-
-puts [nbshapes cmp -t]
-
-eval baddobjects [explode cmp]
-
-dchrono cr reset
-dchrono cr start
-
-bfillds
-bbuild result
-
-dchrono cr stop
-
-set mem_wsetpeak [meminfo wsetpeak]
-
-if { ${mem_wsetpeak} > ${mem_max_wsetpeak}} {
-    puts "Error : there is memory problem (${mem_wsetpeak} MBytes has been allocated)"
-}
-
-set chrono_info [dchrono cr show]
-regexp {CPU user time: ([-0-9.+eE]+) seconds} $chrono_info full CPU_time
-if { $CPU_time > ${max_time} } {
-  puts "CPU user time of Boolean operation is more than ${max_time} seconds - Error"
-} else {
-  puts "CPU user time of Boolean operation is less than ${max_time} seconds - OK"
-}
-
-set nbshapes_expected "
- VERTEX    : 365
- EDGE      : 793
- WIRE      : 531
- FACE      : 531
- SHELL     : 102
- SOLID     : 101
- COMPSOLID : 0
- COMPOUND  : 1
- SHAPE     : 2424
-"
-
-checknbshapes result -ref ${nbshapes_expected} -t
-
-smallview
-donly result
-fit
-
-set 2dviewer 1

tests/bugs/modalg_6/bug27021

@@ -1,47 +0,0 @@
-puts "========"
-puts "OCC27021"
-puts "========"
-puts ""
-###########################################################
-# TopExp::Vertices performance optimization
-###########################################################
-
-pload QAcommands
-
-if { [regexp {Debug mode} [dversion]] } {
-  if { [regexp {Windows} [dversion]] } {
-    set max_time 8.
-    set max_time2 5.
-  } else {
-    set max_time 8.
-    set max_time2 5.
-  }
-} else {
-  if { [regexp {Windows} [dversion]] } {
-    set max_time 8.
-    set max_time2 5.
-  } else {
-    set max_time 8.
-    set max_time2 5.
-  }
-}
-
-restore [locate_data_file bug27021_shape.brep] f
-
-set log [OCC27021 f]
-
-regexp {Retrieving 100000000 vertices using approach A\)\.\.\.done in ([-0-9.+eE]+) seconds} ${log} full A_sec
-regexp {Retrieving 100000000 vertices using approach B\)\.\.\.done in ([-0-9.+eE]+) seconds} ${log} full B_sec
-
-
-if { ${A_sec} > ${max_time} } {                                         
-    puts "Retrieving 100000000 vertices using approach A) is more than ${max_time} seconds - Faulty"
-} else {
-    puts "Retrieving 100000000 vertices using approach A) is less than ${max_time} seconds - OK"
-}
-
-if { ${B_sec} > ${max_time2} } {                                         
-    puts "Retrieving 100000000 vertices using approach A) is more than ${max_time2} seconds - Faulty"
-} else {
-    puts "Retrieving 100000000 vertices using approach A) is less than ${max_time2} seconds - OK"
-}

tests/bugs/moddata_3/bug27048_2

@@ -1,28 +0,0 @@
-puts "============"
-puts "OCC27048"
-puts "============"
-puts ""
-############################################################################
-#  Recalculation of BSpline cache causes a performance problems
-############################################################################
-
-pload XSDRAW
-
-dchrono t reset
-dchrono t start
-testreadstep [locate_data_file bug27048.stp] result
-dchrono t stop
-set elapsed [dchrono t show]
-
-regexp {CPU user time: ([-0-9.+eE]+) seconds} $elapsed full cpu_time
-set max_time 40
-
-if { $cpu_time > ${max_time} } {
-    puts "Error: reading document Doc is too long (greater than ${max_time} sec)"
-} else {
-    puts "OK: performance reading document Doc is suitable"
-}
-
-smallview
-fit
-checkview -screenshot -2d -path ${imagedir}/${test_image}.png

tests/bugs/step/bug27570

@@ -1,27 +0,0 @@
-puts "========"
-puts "OCC27570"
-puts "========"
-puts ""
-###########################################################
-# Unacceptable performance during reading large STEP files
-###########################################################
-
-set max_time 8
-
-dchrono cr reset
-dchrono cr start
-ReadStep D [locate_data_file bug27570.stp]
-dchrono cr stop
-
-# check time
-set chrono_info [dchrono cr show]
-regexp {CPU user time: ([-0-9.+eE]+) seconds} $chrono_info full CPU_time
-if { $CPU_time > ${max_time} } {
-  puts "CPU user time of STEP translation is more than ${max_time} seconds - Error"
-} else {
-  puts "CPU user time of STEP translation is less than ${max_time} seconds - OK"
-}
-
-# check number of shapes
-XGetOneShape result D
-checknbshapes result -solid 1000 -compound 1111

tests/bugs/vis/bug5682

@@ -1,25 +0,0 @@
-puts "============"
-puts "OCC5682"
-puts "============"
-puts ""
-######################################################
-# AIS_InteractiveContext::Remove does not remove the object from memory
-######################################################
-
-set BugNumber OCC5682
-
-box b 100 100 100
-
-vinit
-catch {vselmode 4 1}
-
-set listmem {}
-set i_max 5
-for {set i 1} {${i} <= ${i_max}} {incr i} {
-    vdisplay b
-    vfit
-    vclear
-
-    lappend listmem [meminfo h]
-    checktrend $listmem 0 1 "Memory leak detected"
-}

tests/demo/draw/getsource

@@ -2,7 +2,7 @@
 
 # check that path returned for command pload is as expected
 if { [checkplatform -windows] } {
-    set expected src/Draw/Draw_PloadCommands.cxx
+    set expected /src/Draw/Draw_PloadCommands.cxx
 } else {
     set expected /src/Draw/Draw_PloadCommands.cxx
 }