Add documentation on XDE basics.

Documentation.


Add documentation on XDE basics.


Add documentation on XDE basics.

CMakeLists.txt

@@ -347,8 +347,6 @@ if (MSVC)
   set (BUILD_MODULE_MfcSamples OFF CACHE BOOL "${BUILD_MODULE_MfcSamples_DESCR}")
 endif()
 
-set (BUILD_Inspector OFF CACHE BOOL "${BUILD_Inspector_DESCR}")
-
 # uwp sample
 if (MSVC)
   if ("${CMAKE_SYSTEM_NAME}" STREQUAL "WindowsStore")
@@ -367,6 +365,9 @@ if (WIN32)
   set (USE_D3D OFF CACHE BOOL "${USE_D3D_DESCR}")
 endif()
 
+set (USE_QT_TOOLS OFF CACHE BOOL "${USE_QT_TOOLS_DESCR}")
+set (USE_QT4 ON CACHE BOOL "${USE_QT4}")
+
 # Enable/Disable the floating point exceptions (FPE) during runtime.
 if (NOT BUILD_ENABLE_FPE_SIGNAL_HANDLER)
   set (BUILD_ENABLE_FPE_SIGNAL_HANDLER OFF CACHE BOOL "${BUILD_ENABLE_FPE_SIGNAL_HANDLER_DESCR}" FORCE)
@@ -515,7 +516,6 @@ endif()
 # VTK
 if (USE_VTK)
   add_definitions (-DHAVE_VTK)
-  set (OCCT_VTK_USED_TARGETS "" CACHE INTERNAL "" FORCE)
   OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/vtk")
 else()
   OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_VTK")
@@ -656,13 +656,11 @@ if (CAN_USE_EIGEN)
     OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/eigen")
   else()
     OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_EIGEN")
-    OCCT_CHECK_AND_UNSET ("INSTALL_EIGEN")
   endif()
 else()
   OCCT_CHECK_AND_UNSET ("USE_EIGEN")
 
   OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_EIGEN")
-  OCCT_CHECK_AND_UNSET ("INSTALL_EIGEN")
 endif()
 
 # Doxygen
@@ -779,7 +777,7 @@ endif()
 # include the patched or original list of tools
 # list <TOOLNAME>_TOOLKITS is created foreach tool and contains its toolkits
 # list <OCCT_TOOLS> will contain all tools
-if (NOT BUILD_Inspector)
+if (NOT USE_QT_TOOLS)
   OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_QT")
   OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_TQTMALLOC")
   OCCT_CHECK_AND_UNSET ("INSTALL_QT")
@@ -792,12 +790,13 @@ else()
   # collect all the headers to <binary dir>/inc folder
   string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
   message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/tools/inc ...")
-  COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOL_TOOLKITS}" "${CMAKE_SOURCE_DIR}/tools" "${INSTALL_DIR_INCLUDE}/inspector")
+  COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}" "${BUILD_TOOL_TOOLKITS}" "${CMAKE_SOURCE_DIR}/tools" "tools")
+  include_directories (${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/tools)
 
 
   # check qt 3rdparty path
   add_definitions (-DHAVE_QT)
-  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt")
+  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt5")
   message (STATUS "Info: Qt is used by OCCT")
 endif()
 
@@ -873,22 +872,6 @@ else()
   OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
 endif()
 
-if (WIN32)
-  set (THIRDPARTY_DIR_REPLACE "%THIRDPARTY_DIR%")
-else()
-  set (THIRDPARTY_DIR_REPLACE "\${THIRDPARTY_DIR}")
-endif()
-get_cmake_property(USED_3RDPARTY_CACHE_VARIABLES VARIABLES)
-string (REGEX MATCHALL "(^|;)USED_3RDPARTY_[^;]+_DIR[^;]*" USED_3RDPARTY_CACHE_VARIABLES "${USED_3RDPARTY_CACHE_VARIABLES}")
-file (TO_CMAKE_PATH "${3RDPARTY_DIR}" 3RDPARTY_DIR)
-foreach (USED_3RDPARTY_CACHE_VARIABLE ${USED_3RDPARTY_CACHE_VARIABLES})
-   file (TO_CMAKE_PATH "${${USED_3RDPARTY_CACHE_VARIABLE}}" ${USED_3RDPARTY_CACHE_VARIABLE})
-   string (REPLACE "${3RDPARTY_DIR}" "${THIRDPARTY_DIR_REPLACE}" ${USED_3RDPARTY_CACHE_VARIABLE} "${${USED_3RDPARTY_CACHE_VARIABLE}}")
-   if (NOT WIN32)
-     string (REGEX REPLACE ";" ":" ${USED_3RDPARTY_CACHE_VARIABLE} "${${USED_3RDPARTY_CACHE_VARIABLE}}")
-   endif()
-endforeach()
-
 # write current custom.bat/sh (for install directory)
 set (SUB_CUSTOM_BUILD_NAME "custom_${COMPILER}_${COMPILER_BITNESS}.install.${SCRIPT_EXT}")
 OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${SUB_CUSTOM_BUILD_NAME}" "${SUB_CUSTOM_NAME}" "${INSTALL_DIR_SCRIPT}")
@@ -995,11 +978,11 @@ endif()
 
 if (BUILD_TOOL_TOOLKITS)
   # copy tinspector script to install script folder
-  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/inspector.${SCRIPT_EXT}")
-    install (FILES "${BUILD_PATCH}/adm/templates/inspector.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
+  if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/adm/templates/dfbrowser.${SCRIPT_EXT}")
+    install (FILES "${BUILD_PATCH}/adm/templates/dfbrowser.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
             PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
   else()
-    install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/inspector.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
+    install (FILES "${CMAKE_SOURCE_DIR}/adm/templates/dfbrowser.${SCRIPT_EXT}" DESTINATION  "${INSTALL_DIR_SCRIPT}"
             PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
   endif()
 
@@ -1007,9 +990,6 @@ if (BUILD_TOOL_TOOLKITS)
   foreach (BUILD_SAMPLE_TOOL_TOOLKIT ${BUILD_SAMPLE_TOOLKITS})
     OCCT_ADD_SUBDIRECTORY ("samples/tools/${BUILD_SAMPLE_TOOL_TOOLKIT}")
   endforeach()
-
-  # patch TInspectorEXE
-  OCCT_CONFIGURE ("adm/templates/TInspectorEXE.vcxproj.user.in" "${CMAKE_BINARY_DIR}/samples/tools/TInspectorEXE/TInspectorEXE.vcxproj.user")
 endif()
 
 # Prepare variables for configuration of OpenCASCADE cmake config file

adm/cmake/eigen.cmake

@@ -1,9 +1,5 @@
 # eigen
 
-if (NOT DEFINED INSTALL_EIGEN)
-  set (INSTALL_EIGEN OFF CACHE BOOL "${INSTALL_EIGEN_DESCR}")
-endif()
-
 # eigen directory
 if (NOT DEFINED 3RDPARTY_EIGEN_DIR)
   set (3RDPARTY_EIGEN_DIR "" CACHE PATH "The directory containing eigen")
@@ -65,18 +61,6 @@ endif()
 
 if (3RDPARTY_EIGEN_INCLUDE_DIR AND EXISTS "${3RDPARTY_EIGEN_INCLUDE_DIR}")
   list (APPEND 3RDPARTY_INCLUDE_DIRS "${3RDPARTY_EIGEN_INCLUDE_DIR}")
-
-  # Install header files
-  if (INSTALL_EIGEN)
-    file(GLOB EIGEN_SUBDIRS "${3RDPARTY_EIGEN_INCLUDE_DIR}/*")
-    foreach(SUBDIR ${EIGEN_SUBDIRS})
-      if(IS_DIRECTORY "${SUBDIR}")
-        install (DIRECTORY "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
-      else()
-        install (FILES "${SUBDIR}" DESTINATION "${INSTALL_DIR_INCLUDE}")
-      endif()
-    endforeach()
-  endif()
 else()
   list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_EIGEN_INCLUDE_DIR)
 

adm/cmake/ffmpeg.cmake

@@ -8,7 +8,7 @@ if (NOT DEFINED 3RDPARTY_FFMPEG_DIR)
   set (3RDPARTY_FFMPEG_DIR "" CACHE PATH "The directory containing FFmpeg")
 endif()
 
-# include occt macros. compiler_bitness, os_with_bit, compiler
+# include occt macros. compiler_bitness, os_wiht_bit, compiler
 OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_macros")
 
 # specify FFMPEG folder in connection with 3RDPARTY_DIR
@@ -27,52 +27,49 @@ if (NOT DEFINED 3RDPARTY_FFMPEG_INCLUDE_DIR)
   set (3RDPARTY_FFMPEG_INCLUDE_DIR  "" CACHE PATH "the path of headers directory")
 endif()
 
-separate_arguments (CSF_FFmpeg)
-foreach (LIBRARY_NAME ${CSF_FFmpeg})
-  if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} OR NOT 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
-    set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}               "" CACHE FILEPATH "FFmpeg framework (${LIBRARY_NAME})" FORCE)
-  endif()
+if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY OR NOT 3RDPARTY_FFMPEG_LIBRARY_DIR OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR}")
+  set (3RDPARTY_FFMPEG_LIBRARY               "" CACHE FILEPATH "FFmpeg framework" FORCE)
+endif()
 
-  if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})
-    set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}           "" CACHE PATH "The directory containing FFmpeg framework (${LIBRARY_NAME})")
+if (NOT DEFINED 3RDPARTY_FFMPEG_LIBRARY_DIR)
+  set (3RDPARTY_FFMPEG_LIBRARY_DIR           "" CACHE PATH "The directory containing FFmpeg framework")
+endif()
+
+if (WIN32)
+  if (NOT DEFINED 3RDPARTY_FFMPEG_DLL OR NOT 3RDPARTY_FFMPEG_DLL_DIR OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL_DIR}")
+    set (3RDPARTY_FFMPEG_DLL                 "" CACHE FILEPATH "FFmpeg shared libraries" FORCE)
+  endif()
+endif()
+
+if (WIN32)
+  if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_DIR)
+    set (3RDPARTY_FFMPEG_DLL_DIR               "" CACHE PATH "The directory containing FFmpeg shared libraries")
+  endif()
+endif()
+
+# check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_${PRODUCT_NAME}_DIR
+if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_INCLUDE_DIR PATH "the path to FFmpeg")
+  CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY FILEPATH "the path to FFmpeg framework")
+
+  if (3RDPARTY_FFMPEG_LIBRARY AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY}")
+    get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY}" PATH)
+    set (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY_DIR}" CACHE PATH "The directory containing FFmpeg libraries" FORCE)
+  else()
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY_DIR PATH "The directory containing FFmpeg libraries")
   endif()
 
   if (WIN32)
-    if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} OR NOT 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
-      set (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}                 "" CACHE FILEPATH "FFmpeg shared libraries (${LIBRARY_NAME})" FORCE)
-    endif()
-  endif()
+    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL FILEPATH "the path to FFmpeg shared libraries")
 
-  if (WIN32)
-    if (NOT DEFINED 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
-      set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}               "" CACHE PATH "The directory containing FFmpeg shared libraries (${LIBRARY_NAME})")
-    endif()
-  endif()
-
-  # check 3RDPARTY_${PRODUCT_NAME}_ paths for consistency with specified 3RDPARTY_${PRODUCT_NAME}_DIR
-  if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_INCLUDE_DIR PATH "the path to FFmpeg")
-    CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} FILEPATH "the path to FFmpeg framework (${LIBRARY_NAME})")
-
-    if (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}")
-      get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}" PATH)
-      set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
+    if (3RDPARTY_FFMPEG_DLL AND EXISTS "${3RDPARTY_FFMPEG_DLL}")
+      get_filename_component (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL}" PATH)
+      set (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL_DIR}" CACHE PATH "The directory containing FFmpeg shared libraries" FORCE)
     else()
-      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} PATH "The directory containing FFmpeg library (${LIBRARY_NAME})")
-    endif()
-
-    if (WIN32)
-      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} FILEPATH "the path to FFmpeg shared library (${LIBRARY_NAME})")
-
-      if (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}")
-        get_filename_component (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" PATH)
-        set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})" FORCE)
-      else()
-        CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})")
-      endif()
+      CHECK_PATH_FOR_CONSISTENCY (3RDPARTY_FFMPEG_DIR 3RDPARTY_FFMPEG_DLL_DIR PATH "The directory containing FFmpeg shared libraries")
     endif()
   endif()
-endforeach()
+endif()
 
 # header
 if (NOT 3RDPARTY_FFMPEG_INCLUDE_DIR OR NOT EXISTS "${3RDPARTY_FFMPEG_INCLUDE_DIR}")
@@ -102,132 +99,130 @@ else()
   set (3RDPARTY_FFMPEG_INCLUDE_DIR "" CACHE FILEPATH "the path to avutil.h" FORCE)
 endif()
 
-# libraries
-foreach (LIBRARY_NAME ${CSF_FFmpeg})
-  if (NOT 3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}")
-    set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
+# library
+if (NOT 3RDPARTY_FFMPEG_LIBRARY OR NOT EXISTS "${3RDPARTY_FFMPEG_LIBRARY}")
+  set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
 
-    set (FFMPEG_PATH_SUFFIXES lib)
-    if (ANDROID)
-      set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} libs/${ANDROID_ABI})
-    elseif(APPLE)
-      set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} Frameworks)
-    endif()
-
-    # set 3RDPARTY_FFMPEG_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FFMPEG_LIBRARY
-    set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} "3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}-NOTFOUND" CACHE FILEPATH "The path to FFmpeg library (${LIBRARY_NAME})" FORCE)
-
-    if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
-      find_library (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} NAMES ${LIBRARY_NAME}
-                    PATHS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" "${3RDPARTY_FFMPEG_DIR}"
-                    PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
-                    CMAKE_FIND_ROOT_PATH_BOTH
-                    NO_DEFAULT_PATH)
-    else()
-      find_library (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} NAMES ${LIBRARY_NAME}
-                    PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
-                    CMAKE_FIND_ROOT_PATH_BOTH)
-    endif()
-
-    if (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}")
-      get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}}" PATH)
-      set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
-    else()
-      set (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} "" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
-    endif()
+  set (FFMPEG_PATH_SUFFIXES lib)
+  if (ANDROID)
+    set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} libs/${ANDROID_ABI})
+  elseif(APPLE)
+    set (FFMPEG_PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES} Frameworks)
   endif()
 
-  if (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
-    list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
+  # set 3RDPARTY_FFMPEG_LIBRARY as notfound, otherwise find_library can't assign a new value to 3RDPARTY_FFMPEG_LIBRARY
+  set (3RDPARTY_FFMPEG_LIBRARY "3RDPARTY_FFMPEG_LIBRARY-NOTFOUND" CACHE FILEPATH "The path to FFmpeg library" FORCE)
+
+  if (3RDPARTY_FFMPEG_DIR AND EXISTS "${3RDPARTY_FFMPEG_DIR}")
+    find_library (3RDPARTY_FFMPEG_LIBRARY NAMES avutil
+                  PATHS "${3RDPARTY_FFMPEG_LIBRARY_DIR}" "${3RDPARTY_FFMPEG_DIR}"
+                  PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
+                  CMAKE_FIND_ROOT_PATH_BOTH
+                  NO_DEFAULT_PATH)
   else()
-    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})
-
-    set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} "" CACHE FILEPATH "The path to FFmpeg library (${LIBRARY_NAME})" FORCE)
+    find_library (3RDPARTY_FFMPEG_LIBRARY NAMES avutil
+                  PATH_SUFFIXES ${FFMPEG_PATH_SUFFIXES}
+                  CMAKE_FIND_ROOT_PATH_BOTH)
   endif()
 
-  # shared library
+  if (3RDPARTY_FFMPEG_LIBRARY AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY}")
+    get_filename_component (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY}" PATH)
+    set (3RDPARTY_FFMPEG_LIBRARY_DIR "${3RDPARTY_FFMPEG_LIBRARY_DIR}" CACHE PATH "The directory containing FFmpeg library" FORCE)
+  else()
+    set (3RDPARTY_FFMPEG_LIBRARY_DIR "" CACHE PATH "The directory containing FFmpeg library" FORCE)
+  endif()
+endif()
+
+if (3RDPARTY_FFMPEG_LIBRARY_DIR AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR}")
+  list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FFMPEG_LIBRARY_DIR}")
+else()
+  list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_LIBRARY_DIR)
+
+  set (3RDPARTY_FFMPEG_LIBRARY "" CACHE FILEPATH "The path to FFmpeg library" FORCE)
+endif()
+
+# shared library
+if (WIN32)
+  if (NOT 3RDPARTY_FFMPEG_DLL OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL}")
+
+    set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
+    set (3RDPARTY_FFMPEG_DLL "3RDPARTY_FFMPEG_DLL-NOTFOUND" CACHE FILEPATH "The path to FFmpeg shared library" FORCE)
+
+    # find FFmpeg shared library
+    file (GLOB 3RDPARTY_FFMPEG_DLL "${3RDPARTY_FFMPEG_DIR}/bin/avutil[-][0-9]*")
+
+    if (3RDPARTY_FFMPEG_DLL AND EXISTS "${3RDPARTY_FFMPEG_DLL}")
+      set (3RDPARTY_FFMPEG_DLL "${3RDPARTY_FFMPEG_DLL}" CACHE FILEPATH "FFmpeg shared library" FORCE)
+      get_filename_component (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL}" PATH)
+      set (3RDPARTY_FFMPEG_DLL_DIR "${3RDPARTY_FFMPEG_DLL_DIR}" CACHE PATH "The directory containing FFmpeg library" FORCE)
+    else()
+      set (3RDPARTY_FFMPEG_DLL_DIR "" CACHE PATH "The directory containing FFmpeg shared library" FORCE)
+    endif()
+  endif()
+
+  if (3RDPARTY_FFMPEG_DLL_DIR OR EXISTS "${3RDPARTY_FFMPEG_DLL_DIR}")
+    list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FFMPEG_DLL_DIR}")
+  else()
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_DLL_DIR)
+  endif()
+endif()
+
+# install instructions
+if (INSTALL_FFMPEG)
+  OCCT_MAKE_OS_WITH_BITNESS()
+  OCCT_MAKE_COMPILER_SHORT_NAME()
+
   if (WIN32)
-    if (NOT 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} OR NOT EXISTS "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}")
-
-      set (CMAKE_FIND_LIBRARY_SUFFIXES .dll)
-      set (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} "3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}-NOTFOUND" CACHE FILEPATH "The path to FFmpeg shared library (${LIBRARY_NAME})" FORCE)
-
-      # find FFmpeg shared library
-      file (GLOB 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DIR}/bin/${LIBRARY_NAME}[-][0-9]*")
-
-      if (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}")
-        set (3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" CACHE FILEPATH "FFmpeg shared library (${LIBRARY_NAME})" FORCE)
-        get_filename_component (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" PATH)
-        set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}" CACHE PATH "The directory containing FFmpeg library (${LIBRARY_NAME})" FORCE)
-      else()
-        set (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} "" CACHE PATH "The directory containing FFmpeg shared library (${LIBRARY_NAME})" FORCE)
-      endif()
-    endif()
-
-    if (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} OR EXISTS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
-      list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
+    if (DEFINED INSTALL_BIN_DIR)
+      install (FILES "${3RDPARTY_FFMPEG_DLL}" DESTINATION "${INSTALL_BIN_DIR}")
     else()
-      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
+      install (FILES "${3RDPARTY_FFMPEG_DLL}"
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
+      install (FILES "${3RDPARTY_FFMPEG_DLL}"
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
+      install (FILES "${3RDPARTY_FFMPEG_DLL}"
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
     endif()
-  endif()
-
-  # install instructions
-  if (INSTALL_FFMPEG)
-    OCCT_MAKE_OS_WITH_BITNESS()
-    OCCT_MAKE_COMPILER_SHORT_NAME()
-
-    if (WIN32)
-      if (DEFINED INSTALL_BIN_DIR)
-        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}" DESTINATION "${INSTALL_BIN_DIR}")
-      else()
-        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}"
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
-        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}"
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
-        install (FILES "${3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME}}"
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
-      endif()
-    else()
-      get_filename_component(3RDPARTY_FFMPEG_LIBRARY_ABS ${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}} REALPATH)
-      get_filename_component(3RDPARTY_FFMPEG_LIBRARY_NAME ${3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME}} NAME)
-
-      if (DEFINED INSTALL_LIB_DIR)
-        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-                 DESTINATION "${INSTALL_LIB_DIR}"
-                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
-      else()
-        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
-                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
-        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
-                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
-        install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
-                 RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
-      endif()
-    endif()
-
-    set (USED_3RDPARTY_FFMPEG_DIR "")
   else()
-    # the library directory for using by the executable
-    if (WIN32)
-      set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}})
+    get_filename_component(3RDPARTY_FFMPEG_LIBRARY_ABS ${3RDPARTY_FFMPEG_LIBRARY} REALPATH)
+    get_filename_component(3RDPARTY_FFMPEG_LIBRARY_NAME ${3RDPARTY_FFMPEG_LIBRARY} NAME)
+
+    if (DEFINED INSTALL_LIB_DIR)
+      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+               DESTINATION "${INSTALL_LIB_DIR}"
+               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
     else()
-      set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}})
+      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+               CONFIGURATIONS Release
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/lib"
+               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+               CONFIGURATIONS RelWithDebInfo
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libi"
+               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
+      install (FILES "${3RDPARTY_FFMPEG_LIBRARY_ABS}"
+               CONFIGURATIONS Debug
+               DESTINATION "${INSTALL_DIR}/${OS_WITH_BIT}/${COMPILER}/libd"
+               RENAME ${3RDPARTY_FFMPEG_LIBRARY_NAME}.6)
     endif()
   endif()
 
-  mark_as_advanced (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} 3RDPARTY_FFMPEG_DLL_${LIBRARY_NAME})
-endforeach()
+  set (USED_3RDPARTY_FFMPEG_DIR "")
+else()
+  # the library directory for using by the executable
+  if (WIN32)
+    set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_DLL_DIR})
+  else()
+    set (USED_3RDPARTY_FFMPEG_DIR ${3RDPARTY_FFMPEG_LIBRARY_DIR})
+  endif()
+endif()
 
 # unset all redundant variables
 OCCT_CHECK_AND_UNSET (FFMPEG_INCLUDE_DIRS)
 OCCT_CHECK_AND_UNSET (FFMPEG_LIBRARY_DIRS)
 OCCT_CHECK_AND_UNSET (FFMPEG_DIR)
+
+mark_as_advanced (3RDPARTY_FFMPEG_LIBRARY 3RDPARTY_FFMPEG_DLL)

adm/cmake/occt_csf.cmake

@@ -35,11 +35,7 @@ endif()
 if (USE_FREEIMAGE)
   set (CSF_FreeImagePlus "freeimage")
 else()
-  if (WIN32)
-    set (CSF_FreeImagePlus "windowscodecs")
-  else()
-    set (CSF_FreeImagePlus)
-  endif()
+  set (CSF_FreeImagePlus)
 endif()
 
 # TCL/TK

adm/cmake/occt_macros.cmake

@@ -116,7 +116,7 @@ function (FIND_SUBDIRECTORY ROOT_DIRECTORY DIRECTORY_SUFFIX SUBDIRECTORY_NAME)
   foreach (SUBDIR_NAME ${SUBDIR_NAME_LIST})
     #message("Subdir: ${SUBDIR_NAME}, ${DIRECTORY_SUFFIX}")
     # REGEX failed if the directory name contains '++' combination, so we replace it
-    string(REPLACE "+" "\\+" SUBDIR_NAME_ESCAPED ${SUBDIR_NAME})
+    string(REPLACE "++" "\\+\\+" SUBDIR_NAME_ESCAPED ${SUBDIR_NAME})
     string (REGEX MATCH "${SUBDIR_NAME_ESCAPED}" DOES_PATH_CONTAIN "${DIRECTORY_SUFFIX}")
     if (DOES_PATH_CONTAIN)
       set(${SUBDIRECTORY_NAME} "${ROOT_DIRECTORY}/${SUBDIR_NAME}" PARENT_SCOPE)
@@ -340,7 +340,7 @@ macro (COLLECT_AND_INSTALL_OCCT_HEADER_FILES ROOT_TARGET_OCCT_DIR OCCT_BUILD_TOO
   string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
   message (STATUS "Info: \(${CURRENT_TIME}\) Checking headers in inc folder...")
     
-  file (GLOB OCCT_HEADER_FILES_OLD "${ROOT_TARGET_OCCT_DIR}/${OCCT_INSTALL_DIR_PREFIX}/*")
+  file (GLOB OCCT_HEADER_FILES_OLD "${ROOT_TARGET_OCCT_DIR}/inc/*")
   foreach (OCCT_HEADER_FILE_OLD ${OCCT_HEADER_FILES_OLD})
     get_filename_component (HEADER_FILE_NAME ${OCCT_HEADER_FILE_OLD} NAME)
     string (REGEX MATCH "^[a-zA-Z0-9]+" PACKAGE_NAME "${HEADER_FILE_NAME}")

adm/cmake/occt_toolkit.cmake

@@ -152,8 +152,8 @@ else()
   add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})
 
   if (MSVC)
-    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
-             CONFIGURATIONS Debug RelWithDebInfo
+    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind/${PROJECT_NAME}.pdb
+             CONFIGURATIONS Debug
              DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
   endif()
 
@@ -213,9 +213,6 @@ foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
     
     if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
       list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
-      if (NOT "${VTK_FOUND}" STREQUAL "" AND BUILD_SHARED_LIBS AND INSTALL_VTK AND COMMAND OCCT_INSTALL_VTK)
-        OCCT_INSTALL_VTK(${USED_ITEM})
-      endif()
     else()
       string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
       if ("${CSF_FOUND}" STREQUAL "")

adm/cmake/occt_toolkit_tool.cmake

@@ -1,9 +1,9 @@
 # script for each OCCT tool toolkit
 
 # Qt dependencies
-OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt_macro)
+OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt5_macro)
 
-FIND_QT_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
+FIND_QT5_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
 include_directories("${PROJECT_INCLUDES}"
                     "${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/tools")
 
@@ -183,8 +183,8 @@ else()
   add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RCC_FILES})
 
   if (MSVC)
-    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
-             CONFIGURATIONS Debug RelWithDebInfo
+    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind/${PROJECT_NAME}.pdb
+             CONFIGURATIONS Debug
              DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
   endif()
 
@@ -245,9 +245,6 @@ foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
     
     if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
       list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
-      if (NOT "${VTK_FOUND}" STREQUAL "" AND BUILD_SHARED_LIBS AND INSTALL_VTK AND COMMAND OCCT_INSTALL_VTK)
-        OCCT_INSTALL_VTK(${USED_ITEM})
-      endif()
     else()
       string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
       if ("${CSF_FOUND}" STREQUAL "")

adm/cmake/qt5.cmake

@@ -1,10 +1,13 @@
 #qt
 
-#looking for 3RDPARTY_QT_DIR variable used later in qt_macro.cmake
-SET(CSF_QtCore "QtCore")
-THIRDPARTY_PRODUCT("QT" "" "CSF_QtCore" "d")
-
-list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_QT_DIR}/bin")
+#looking for 3RDPARTY_QT_DIR variable used later in qt5_macro.cmake
+if (${USE_QT4})
+  SET(CSF_QtCore "QtCore")
+  THIRDPARTY_PRODUCT("QT" "" "CSF_QtCore" "d")
+else()
+  SET(CSF_Qt5Core "Qt5Core")
+  THIRDPARTY_PRODUCT("QT" "" "CSF_Qt5Core" "d")
+endif()
 
 list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_INCLUDE_DIR")
 list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_LIBRARY_DIR")
@@ -17,4 +20,3 @@ UNSET (${3RDPARTY_QT_LIBRARY} CACHE)
 UNSET (${3RDPARTY_QT_LIBRARY_DIR} CACHE)
 
 set (USED_3RDPARTY_QT_DIR "${3RDPARTY_QT_DIR}")
-message (STATUS "Info: Qt is used from folder: ${3RDPARTY_QT_DIR}")

adm/cmake/qt5_macro.cmake

@@ -1,6 +1,6 @@
 #qt
 
-macro (FIND_QT_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
+macro (FIND_QT5_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
 
   if ("${3RDPARTY_QT_DIR}" STREQUAL "")
     message (FATAL_ERROR "Empty Qt dir")
@@ -9,22 +9,12 @@ macro (FIND_QT_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT
   # Now set CMAKE_PREFIX_PATH to point to local Qt installation.
   # Without this setting find_package() will not work
   set(CMAKE_PREFIX_PATH ${3RDPARTY_QT_DIR})
-
-  # Now we can apply standard CMake finder for Qt5. We do this mostly
-  # to have qt5_wrap_cpp() function available
-  find_package(Qt5 QUIET COMPONENTS Widgets PATHS ${3RDPARTY_QT_DIR} NO_DEFAULT_PATH)
-  if (${Qt5_FOUND})
-    #message (STATUS "Qt5 cmake configuration")
-
-    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}")
-    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}")
-    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}")
-  else()
+  if (USE_QT4)
     # Now we can apply standard CMake finder for Qt. We do this mostly
-    # to have qt4_wrap_cpp() function available
+    # to have qt5_wrap_cpp() function available
     find_package(Qt4)
+    #message (STATUS "Qt cmake configuration at directory ${Qt4DIR}")
 
-    #message (STATUS "Qt4 cmake configuration")
     set(PROJECT_INCLUDES ${QT_INCLUDES})
     if (WIN32)
       set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/QtCored4.lib;${3RDPARTY_QT_DIR}/lib/QtGuid4.lib")
@@ -33,21 +23,29 @@ macro (FIND_QT_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT
       set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
       set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
     endif(WIN32)
+  else()
+    # Now we can apply standard CMake finder for Qt4. We do this mostly
+    # to have qt5_wrap_cpp() function available
+    find_package(Qt5 REQUIRED COMPONENTS Widgets)
+    #message (STATUS "Qt cmake configuration at directory ${Qt5DIR}")
+
+    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}")
+    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}")
+    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}")
   endif()
 endmacro()
 
 
 macro (FIND_AND_WRAP_MOC_FILES SOURCE_FILES)
-
   SET(CMAKE_AUTOMOC ON)
 
   foreach (FILE ${SOURCE_FILES})
     set (src_files ${src_files} ${FILE})
     unset (MOC_FILE)
-    if (${Qt5_FOUND})
-      qt5_wrap_cpp(MOC_FILE ${FILE})
-    else()
+    if (USE_QT4)
       qt4_wrap_cpp(MOC_FILE ${FILE})
+    else()
+      qt5_wrap_cpp(MOC_FILE ${FILE})
     endif()
     #message (STATUS "... Info: next MOC file ${MOC_FILE}")
 
@@ -57,14 +55,14 @@ endmacro()
 
 macro (FIND_AND_WRAP_RESOURCE_FILE RESOURCE_FILE_NAME RCC_FILES)
   if(EXISTS "${RESOURCE_FILE_NAME}")
-    if (${Qt5_FOUND})
-      qt5_add_resources(RCC_FILES "${RESOURCE_FILE_NAME}")
-    else()
+    if (USE_QT4)
       qt4_add_resources(RCC_FILES "${RESOURCE_FILE_NAME}")
       # suppress some GCC warnings coming from source files generated from .qrc resources
       if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
         set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-unused-variable")
       endif()
+    else()
+      qt5_add_resources(RCC_FILES "${RESOURCE_FILE_NAME}")
     endif()
   endif()
 endmacro()

adm/cmake/vardescr.cmake

@@ -84,7 +84,6 @@ INSTALL_MESSAGE (INSTALL_TEST_CASES       "non-regression OCCT test scripts")
 INSTALL_MESSAGE (INSTALL_DOC_Overview     "OCCT overview documentation (HTML format)")
 INSTALL_MESSAGE (INSTALL_FFMPEG           "FFmpeg binaries")
 INSTALL_MESSAGE (INSTALL_FREEIMAGE        "FreeImage binaries")
-INSTALL_MESSAGE (INSTALL_EIGEN            "EIGEN header files")
 INSTALL_MESSAGE (INSTALL_EGL              "EGL binaries")
 INSTALL_MESSAGE (INSTALL_GLES2            "OpenGL ES 2.0 binaries")
 INSTALL_MESSAGE (INSTALL_FREETYPE         "FreeType binaries")
@@ -92,7 +91,8 @@ INSTALL_MESSAGE (INSTALL_GL2PS            "GL2PS binaries")
 INSTALL_MESSAGE (INSTALL_TBB              "TBB binaries")
 INSTALL_MESSAGE (INSTALL_TCL              "TCL binaries")
 INSTALL_MESSAGE (INSTALL_TK               "TK binaries")
-INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
+
+#INSTALL_MESSAGE (INSTALL_VTK              "VTK binaries ")
 
 # build variables
 macro (BUILD_MODULE_MESSAGE BUILD_MODULE_TARGET_VARIABLE BUILD_MODULE_TARGET_STRING)
@@ -122,13 +122,6 @@ set (BUILD_MODULE_MfcSamples_DESCR
 These samples show some possibilities of using OCCT and they can be executed
 with script samples.bat from the installation directory (INSTALL_DIR)")
 
-set (BUILD_Inspector_DESCR
-"Indicates whether OCCT inspector should be built together with OCCT.
-This inspector provides functionality to interactively inspect low-level content
-of the OCAF data model, OCCT viewer, etc. have been introduced in OCCT.
-It can be executed with script inspector.bat from the installation directory (INSTALL_DIR) or
-using 'tinspector' command in DRAW interpretator")
-
 set (BUILD_MODULE_UwpSample_DESCR
 "Indicates whether OCCT UWP sample should be built together with OCCT.")
 
@@ -179,6 +172,11 @@ set (USE_GLX_DESCR "Indicates whether X11 OpenGl on OSX is used or not")
 
 set (USE_D3D_DESCR "Indicates whether optional Direct3D wrapper in OCCT visualization module should be build or not")
 
+set (BUILD_QT_TOOLS_DESCR "Indicates whether OCCT tools should be build or not")
+
+set (USE_QT_TOOLS_DESCR "Indicates whether OCCT tools should be used or not
+The tools will be searched in third-party directory or may be set manually")
+
 macro (BUILD_MODULE MODULE_NAME)
   set (ENABLE_MODULE TRUE)
   set (BUILD_MODULE_${MODULE_NAME} ${ENABLE_MODULE} CACHE BOOL "${BUILD_MODULE_${MODULE_NAME}_DESCR}")

adm/cmake/vtk.cmake

@@ -1,8 +1,8 @@
 # vtk
 
-if (NOT DEFINED INSTALL_VTK)
-  set (INSTALL_VTK OFF CACHE BOOL "${INSTALL_VTK_DESCR}")
-endif()
+#if (NOT DEFINED INSTALL_VTK)
+#  set (INSTALL_VTK OFF CACHE BOOL "${INSTALL_VTK_DESCR}")
+#endif()
 
 # vtk directory
 if (NOT DEFINED 3RDPARTY_VTK_DIR)
@@ -210,86 +210,11 @@ if (BUILD_SHARED_LIBS)
   endif()
 endif()
 
-# Install vtk library using vtk targets
-macro (OCCT_INSTALL_VTK VTK_LIBRARY_NAME)
-  # Check that input library name contains "vtk" prefix
-  string (REGEX MATCH "^vtk" IS_VTK_LIBRARY ${VTK_LIBRARY_NAME})
-  # Check that input library was not already installed
-  list (FIND OCCT_VTK_USED_TARGETS ${VTK_LIBRARY_NAME} VTK_LIBRARY_IS_USED)
-  if (BUILD_SHARED_LIBS AND INSTALL_VTK AND TARGET ${VTK_LIBRARY_NAME} AND VTK_LIBRARY_IS_USED EQUAL -1 AND IS_VTK_LIBRARY)
-    OCCT_MAKE_OS_WITH_BITNESS()
-
-    # Get configuration of vtk
-    get_target_property (TARGET_VTK_IMPORT_CONFS ${VTK_LIBRARY_NAME} IMPORTED_CONFIGURATIONS)
-    list (GET TARGET_VTK_IMPORT_CONFS 0 CHOSEN_IMPORT_CONF)
-
-    # Get dependencies for current input library
-    get_property(VTK_LIBRARY_PATH       TARGET ${VTK_LIBRARY_NAME} PROPERTY LOCATION)
-    get_property(VTK_DEPEND             TARGET ${VTK_LIBRARY_NAME} PROPERTY IMPORTED_LINK_DEPENDENT_LIBRARIES_${CHOSEN_IMPORT_CONF})
-    get_property(VTK_IMPORTED_INTERFACE TARGET ${VTK_LIBRARY_NAME} PROPERTY IMPORTED_LINK_INTERFACE_LIBRARIES_${CHOSEN_IMPORT_CONF})
-    get_property(VTK_INTERFACE          TARGET ${VTK_LIBRARY_NAME} PROPERTY INTERFACE_LINK_LIBRARIES)
-    list (APPEND VTK_DEPEND ${VTK_INTERFACE} ${VTK_IMPORTED_INTERFACE})
-
-    # Install
-    if (WIN32)
-      if (SINGLE_GENERATOR)
-        install (FILES "${VTK_LIBRARY_PATH}" DESTINATION "${INSTALL_DIR_BIN}")
-      else()
-        install (FILES "${VTK_LIBRARY_PATH}"
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR_BIN}")
-        install (FILES "${VTK_LIBRARY_PATH}"
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR_BIN}i")
-        install (FILES "${VTK_LIBRARY_PATH}"
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR_BIN}d")
-      endif()
-    else()
-      get_filename_component(3RDPARTY_VTK_LIBRARY_ABS ${VTK_LIBRARY_PATH} REALPATH)
-
-      if (SINGLE_GENERATOR)
-        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
-                 DESTINATION "${INSTALL_DIR_LIB}")
-      else()
-        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
-                 CONFIGURATIONS Release
-                 DESTINATION "${INSTALL_DIR_LIB}")
-        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
-                 CONFIGURATIONS RelWithDebInfo
-                 DESTINATION "${INSTALL_DIR_LIB}i")
-        install (FILES "${3RDPARTY_VTK_LIBRARY_ABS}"
-                 CONFIGURATIONS Debug
-                 DESTINATION "${INSTALL_DIR_LIB}d")
-      endif()
-    endif()
-
-    set (USED_3RDPARTY_VTK_DIR "")
-
-    # Mark current library as already installed
-    list (APPEND OCCT_VTK_USED_TARGETS ${VTK_LIBRARY_NAME})
-    set (OCCT_VTK_USED_TARGETS "${OCCT_VTK_USED_TARGETS}" CACHE INTERNAL "" FORCE)
-
-    # Recursively install all depended libraries
-    foreach(VTK_TARGET ${VTK_DEPEND})
-      OCCT_INSTALL_VTK(${VTK_TARGET})
-    endforeach()
-  endif()
-endmacro()
-
-if (NOT BUILD_SHARED_LIBS)
-  OCCT_CHECK_AND_UNSET(3RDPARTY_VTK_DLL_DIR)
-  OCCT_CHECK_AND_UNSET(3RDPARTY_VTK_LIBRARY_DIR)
-  OCCT_CHECK_AND_UNSET(INSTALL_VTK)
-endif()
-
 # the library directory for using by the executable
-if (NOT INSTALL_VTK)
-  if (WIN32)
-    set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_DLL_DIR})
-  else()
-    set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_LIBRARY_DIR})
-  endif()
+if (WIN32)
+  set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_DLL_DIR})
+else()
+  set (USED_3RDPARTY_VTK_DIR ${3RDPARTY_VTK_LIBRARY_DIR})
 endif()
 
 OCCT_CHECK_AND_UNSET (VTK_INCLUDE_DIRS)

adm/genproj.tcl

@@ -1312,8 +1312,6 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
     } else {
       set aLibsMap(CSF_FreeImagePlus) "freeimage"
     }
-  } elseif { "$theOS" == "wnt" } {
-    set aLibsMap(CSF_FreeImagePlus) "windowscodecs"
   }
   if { "$::HAVE_FFMPEG" == "true" } {
     set aLibsMap(CSF_FFmpeg) "avcodec avformat swscale avutil"
@@ -1363,7 +1361,6 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
     # tbb headers define different pragma lib depending on debug/release
     set aLibsMap(CSF_TBB) ""
   } else {
-    set aLibsMap(CSF_dl)           "dl"
     if { "$theOS" == "mac" } {
       set aLibsMap(CSF_objc)       "objc"
       set aFrmsMap(CSF_Appkit)     "Appkit"

adm/templates/TInspectorEXE.vcxproj.user.in

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|@X_COMPILER_BITNESS@'">
-  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
-CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
-QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
- </LocalDebuggerEnvironment>
- <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
- <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='RelWithDebInfo|@X_COMPILER_BITNESS@'">
-  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
-CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
-QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
- </LocalDebuggerEnvironment>
- <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
- <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@X_COMPILER_BITNESS@'">
-  <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
-CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
-QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
- </LocalDebuggerEnvironment>
- <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
- <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
- </PropertyGroup>
-</Project>

adm/templates/custom.install.bat.in

@@ -24,15 +24,18 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "TCL_VERSION_WITH_DOT=@3RDPARTY_TCL_LIBRARY_VERSION_WITH_DOT@"
     set "TK_VERSION_WITH_DOT=@3RDPARTY_TK_LIBRARY_VERSION_WITH_DOT@"
 
-    set "CSF_OCCTBinPath=%CASROOT%/@INSTALL_DIR_BIN@%3"
-    set "CSF_OCCTLibPath=%CASROOT%/@INSTALL_DIR_LIB@%3"
+    set "CSF_OCCTBinPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_BIN@%3"
+    set "CSF_OCCTLibPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_LIB@%3"
 
-    set "CSF_OCCTIncludePath=%CASROOT%/@INSTALL_DIR_INCLUDE@"
-    set "CSF_OCCTResourcePath=%CASROOT%/@INSTALL_DIR_RESOURCE@"
-    set "CSF_OCCTDataPath=%CASROOT%/@INSTALL_DIR_DATA@"
-    set "CSF_OCCTSamplesPath=%CASROOT%/@INSTALL_DIR_SAMPLES@"
-    set "CSF_OCCTTestsPath=%CASROOT%/@INSTALL_DIR_TESTS@"
-    set "CSF_OCCTDocPath=%CASROOT%/@INSTALL_DIR_DOC@"
+    set "CSF_OCCTIncludePath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_INCLUDE@"
+    set "CSF_OCCTResourcePath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_RESOURCE@"
+    set "CSF_OCCTDataPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DATA@"
+    set "CSF_OCCTSamplesPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_SAMPLES@"
+    set "CSF_OCCTTestsPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_TESTS@"
+    set "CSF_OCCTDocPath=@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DOC@"
+
+    rem for compatability with external application using CASROOT
+    set "CASROOT=@INSTALL_DIR_ABSOLUTE@"
   )
 )
 

adm/templates/custom.install.sh.in

@@ -21,14 +21,17 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TCL_VERSION_WITH_DOT="@3RDPARTY_TCL_LIBRARY_VERSION_WITH_DOT@"
     export TK_VERSION_WITH_DOT="@3RDPARTY_TK_LIBRARY_VERSION_WITH_DOT@"
 
-    export CSF_OCCTBinPath="${CASROOT}/@INSTALL_DIR_BIN@"
-    export CSF_OCCTLibPath="${CASROOT}/@INSTALL_DIR_LIB@"
-    export CSF_OCCTIncludePath="${CASROOT}/@INSTALL_DIR_INCLUDE@"
-    export CSF_OCCTResourcePath="${CASROOT}/@INSTALL_DIR_RESOURCE@"
-    export CSF_OCCTDataPath="${CASROOT}/@INSTALL_DIR_DATA@"
-    export CSF_OCCTSamplesPath="${CASROOT}/@INSTALL_DIR_SAMPLES@"
-    export CSF_OCCTTestsPath="${CASROOT}/@INSTALL_DIR_TESTS@"
-    export CSF_OCCTDocPath="${CASROOT}/@INSTALL_DIR_DOC@"
+    export CSF_OCCTBinPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_BIN@"
+    export CSF_OCCTLibPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_LIB@"
+    export CSF_OCCTIncludePath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_INCLUDE@"
+    export CSF_OCCTResourcePath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_RESOURCE@"
+    export CSF_OCCTDataPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DATA@"
+    export CSF_OCCTSamplesPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_SAMPLES@"
+    export CSF_OCCTTestsPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_TESTS@"
+    export CSF_OCCTDocPath="@INSTALL_DIR_ABSOLUTE@/@INSTALL_DIR_DOC@"
+    
+    # for compatability with external application using CASROOT
+    export CASROOT="@INSTALL_DIR_ABSOLUTE@"
   fi
 fi
 

adm/templates/dfbrowser.bat

@@ -0,0 +1,7 @@
+@echo off
+
+rem Setup environment and launch TInspector
+call "%~dp0env.bat" %1 %2 %3
+
+TInspectorEXE.exe --dfbrowser
+

adm/templates/dfbrowser.sh

@@ -6,4 +6,4 @@ aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath
 source "${aScriptPath}/env.sh" "$1"
 
 cd ${aCurrentPath}
-TInspectorEXE
+TInspectorEXE --dfbrowser

adm/templates/env.bat

@@ -31,14 +31,14 @@ set "CSF_OPT_LIB64="
 set "CSF_OPT_BIN32="
 set "CSF_OPT_BIN64="
 
+rem ----- Load local settings -----
+if exist "%~dp0custom.bat" (
+  call "%~dp0custom.bat" %1 %2 %3 %4 %5
+)
+
 if not ["%CASROOT%"] == [""] if exist "%SCRIPTROOT%\%CASROOT%" set "CASROOT=%SCRIPTROOT%\%CASROOT%"
 if     ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
 
-rem ----- Load local settings -----
-if exist "%CASROOT%\custom.bat" (
-  call "%CASROOT%\custom.bat" %1 %2 %3 %4 %5
-)
-
 rem ----- Read script arguments (override local settings) -----
 if not ["%1"]    == [""]      set "VCVER=%1"
 if not ["%2"]    == [""]      set "ARCH=%2"
@@ -49,33 +49,8 @@ if /I ["%3"]     == ["d"]     set "CASDEB=d"
 if /I ["%3"]     == ["i"]     set "CASDEB=i"
 if /I ["%3"]     == ["relwithdeb"] set "CASDEB=i"
 
-rem Decode VCVER variable and define related ones:
-rem
-rem VCFMT - "vc" followed by full version number of Visual Studio toolset
-rem         (same as VCVER without optional suffix "-uwp")
-rem VCLIB - name of folder contining binaries
-rem         (same as VCVER except without third version in number)
-rem VCPROP - name of required Visual Studion Workload (starting with VS 2017)
-rem
-rem Note that for VS before 2015 (vc14) always
-rem VCFMT=VCLIB=VCVER and VCPROP=NativeDesktop
-
-rem Since VS 2017, environment variables like VS100COMNTOOLS are not defined 
-rem any more, we can only use vswhere.exe tool to find Visual Studio.
-rem Add path to vswhere.exe
-set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
-
-rem for vc10-12, interpretation is trivial
-set VCFMT=%VCVER%
-set VCLIB=%VCVER:~0,4%
-set VCPROP=NativeDesktop
-rem vc14 and later can have optional suffix "-uwp"
-if "%VCVER:~-4%" == "-uwp" (
-  set VCFMT=%VCVER:~0,-4%
-  set VCLIB=%VCLIB%-uwp
-  set VCPROP=Universal
-)
-rem echo VCVER=%VCVER% VCFMT=%VCFMT% VCLIB=%VCLIB% VCPROP=%VCPROP%
+rem Decode VCVER
+call "%~dp0adm\vcver.bat"
 
 rem ----- Parsing of Visual Studio platform -----
 set "VisualStudioExpressName=VCExpress"
@@ -98,8 +73,6 @@ if not "%DevEnvDir%" == "" (
   for /f "usebackq delims=" %%i in (`vswhere.exe -version "[15.0,15.99]" -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
     set "DevEnvDir=%%i\Common7\IDE\"
   )
-) else if /I "%VCFMT%" == "gcc" (
-  rem MinGW
 ) else (
   echo Error: wrong VS identifier
   exit /B
@@ -123,8 +96,6 @@ if /I "%VCFMT%" == "vc10" (
     set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
   )
   set "VCPlatformToolSet=v141"
-) else if /I "%VCFMT%" == "gcc" (
-  rem MinGW
 ) else (
   echo Error: first argument ^(%VCVER%^) should specify supported version of Visual C++,
   echo one of: vc10 ^(VS 2010 SP3^), vc11 ^(VS 2012 SP3^), vc12 ^(VS 2013^) or vc14 ^(VS 2015^)

adm/templates/env.bat.in

@@ -31,9 +31,7 @@ rem VCFMT=VCLIB=VCVER and VCPROP=NativeDesktop
 rem Since VS 2017, environment variables like VS100COMNTOOLS are not defined 
 rem any more, we can only use vswhere.exe tool to find Visual Studio.
 rem Add path to vswhere.exe
-if /I not "%VCFMT%" == "gcc" (
-  set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
-)
+set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
 
 rem for vc10-12, interpretation is trivial
 set VCFMT=%VCVER%
@@ -68,8 +66,6 @@ if not "%DevEnvDir%" == "" (
   for /f "usebackq delims=" %%i in (`vswhere.exe -version "[15.0,15.99]" -requires Microsoft.VisualStudio.Workload.%VCPROP% -property installationPath`) do (
     set "DevEnvDir=%%i\Common7\IDE\"
   )
-) else if /I "%VCFMT%" == "gcc" (
-  rem MinGW
 ) else (
   echo Error: wrong VS identifier
   exit /B
@@ -93,28 +89,23 @@ if /I "%VCFMT%" == "vc10" (
     set "VCVARS=%%i\VC\Auxiliary\Build\vcvarsall.bat"
   )
   set "VCPlatformToolSet=v141"
-) else if /I "%VCFMT%" == "gcc" (
-  rem MinGW
 ) else (
   echo Error: first argument ^(%VCVER%^) should specify supported version of Visual C++,
   echo one of: vc10 ^(VS 2010 SP3^), vc11 ^(VS 2012 SP3^), vc12 ^(VS 2013^) or vc14 ^(VS 2015^)
   exit
 )
 
-rem ----- For compatability with external application using CASROOT -----
-if ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
-
-rem ----- Define path to 3rdparty products -----
-set "THIRDPARTY_DIR=@3RDPARTY_DIR@"
-
 if ["%ARCH%"] == ["32"] set VCARCH=x86
 if ["%ARCH%"] == ["64"] set VCARCH=amd64
 
 if /I ["%1"] == ["vc141"] set "VCVER=vc14"
-if exist "%CASROOT%\custom.bat" (
-  call "%CASROOT%\custom.bat" %VCVER% %ARCH% %CASDEB%
+if exist "%~dp0custom.bat" (
+  call "%~dp0custom.bat" %VCVER% %ARCH% %CASDEB%
 )
 
+rem for compatability with external application using CASROOT
+if ["%CASROOT%"] == [""] set "CASROOT=%SCRIPTROOT%"
+
 if not ["%TCL_DIR%"] == [""]           set "PATH=%TCL_DIR%;%PATH%"
 if not ["%TK_DIR%"] == [""]            set "PATH=%TK_DIR%;%PATH%"
 if not ["%FREETYPE_DIR%"] == [""]      set "PATH=%FREETYPE_DIR%;%PATH%"
@@ -155,7 +146,7 @@ set "CSF_STEPDefaults=%CSF_OCCTResourcePath%\XSTEPResource"
 set "CSF_XmlOcafResource=%CSF_OCCTResourcePath%\XmlOcafResource"
 set "CSF_MIGRATION_TYPES=%CSF_OCCTResourcePath%\StdResource\MigrationSheet.txt"
 
-rem ----- Draw Harness special stuff -----
+rem Draw Harness special stuff
 if exist "%CSF_OCCTResourcePath%\DrawResources" (
   set "DRAWHOME=%CSF_OCCTResourcePath%\DrawResources"
   set "CSF_DrawPluginDefaults=%CSF_OCCTResourcePath%\DrawResources"

adm/templates/env.sh

@@ -24,13 +24,15 @@ export CSF_OPT_BIN32=""
 export CSF_OPT_BIN64=""
 
 # ----- Set local settings -----
+if [ "${CASROOT}" != "" ] && [ -e "${CASROOT}/custom.sh" ]; then source "${CASROOT}/custom.sh"; fi
+if [ -e "${aScriptPath}/custom.sh" ]; then source "${aScriptPath}/custom.sh"; fi
+
 if [ "${CASROOT}" != "" ] && [ -d "${aScriptPath}/${CASROOT}" ]; then
   export CASROOT="${aScriptPath}/${CASROOT}"
 fi
 if [ "${CASROOT}" == "" ]; then
   export CASROOT="${aScriptPath}"
 fi
-if [ -e "${CASROOT}/custom.sh" ]; then source "${CASROOT}/custom.sh"; fi
 
 # Read script arguments
 shopt -s nocasematch

adm/templates/env.sh.in

@@ -2,15 +2,12 @@
 
 aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
 
-# ----- For compatability with external application using CASROOT -----
+# ----- for compatability with external application using CASROOT -----
 if [ "${CASROOT}" == "" ]; then
-  export CASROOT="@INSTALL_DIR@"
+  export CASROOT="${aScriptPath}"
 fi
 
-# ----- Define path to 3rdparty products -----
-export THIRDPARTY_DIR="@3RDPARTY_DIR@"
-
-# ----- Read script arguments -----
+# Read script arguments
 shopt -s nocasematch
 export CASDEB="";
 if [[ "$1" == "debug" ]]; then export CASDEB="d"; fi
@@ -36,8 +33,8 @@ else
 fi
 
 # ----- Set local settings -----
-if [ -e "${CASROOT}/@INSTALL_DIR_SCRIPT@/custom.sh" ]; then
-  source "${CASROOT}/@INSTALL_DIR_SCRIPT@/custom.sh" "${CASDEB}" "${ARCH}"
+if [ -e "${aScriptPath}/custom.sh" ]; then
+  source "${aScriptPath}/custom.sh" "${CASDEB}" "${ARCH}"
 fi
 
 THRDPARTY_PATH=""
@@ -130,7 +127,7 @@ export CSF_STEPDefaults="${CSF_OCCTResourcePath}/XSTEPResource"
 export CSF_XmlOcafResource="${CSF_OCCTResourcePath}/XmlOcafResource"
 export CSF_MIGRATION_TYPES="${CSF_OCCTResourcePath}/StdResource/MigrationSheet.txt"
 
-# ----- Draw Harness special stuff -----
+# Draw Harness special stuff
 if [ -e "${CSF_OCCTResourcePath}/DrawResources" ]; then
   export DRAWHOME="${CSF_OCCTResourcePath}/DrawResources"
   export CSF_DrawPluginDefaults="${CSF_OCCTResourcePath}/DrawResources"

adm/templates/inspector.bat

@@ -1,17 +0,0 @@
-@echo off
-
-rem Use:
-rem - first argument specifies version of Visual Studio (vc8, vc9, or vc10),
-rem - second argument specifies architecture (win32 or win64),
-rem - third argument specifies build mode (Debug or Release)
-rem - fourth and next arguments specify loaded tool plugins
-rem     The arguments are: dfbrowser shapeview vinspector
-rem     If there are no tool plugins are specified, all plugins will be loaded
-rem Default options are:
-rem   vc8 win32 Release
-
-rem Setup environment and launch TInspector
-call "%~dp0env.bat" %1 %2 %3
-
-TInspectorEXE.exe %*
-

adm/vcver.bat

@@ -0,0 +1,30 @@
+@echo off
+rem Decode VCVER variable and define related ones:
+rem
+rem VCFMT - "vc" followed by full version number of Visual Studio toolset
+rem         (same as VCVER without optional suffix "-uwp")
+rem VCLIB - name of folder contining binaries
+rem         (same as VCVER except without third version in number)
+rem VCPROP - name of required Visual Studion Workload (starting with VS 2017)
+rem
+rem Note that for VS before 2015 (vc14) always
+rem VCFMT=VCLIB=VCVER and VCPROP=NativeDesktop
+
+rem Since VS 2017, environment variables like VS100COMNTOOLS are not defined 
+rem any more, we can only use vswhere.exe tool to find Visual Studio.
+rem Add path to vswhere.exe
+set "PATH=%PATH%;%ProgramFiles(x86)%\Microsoft Visual Studio\Installer"
+
+rem for vc10-12, interpretation is trivial
+set VCFMT=%VCVER%
+set VCLIB=%VCVER:~0,4%
+set VCPROP=NativeDesktop
+
+rem vc14 and later can have optional suffix "-uwp"
+if "%VCVER:~-4%" == "-uwp" (
+  set VCFMT=%VCVER:~0,-4%
+  set VCLIB=%VCLIB%-uwp
+  set VCPROP=Universal
+)
+
+rem echo VCVER=%VCVER% VCFMT=%VCFMT% VCLIB=%VCLIB% VCPROP=%VCPROP%

dox/FILES_HTML.txt

@@ -13,7 +13,6 @@ overview/overview.md
 
 ../samples/qt/AndroidQt/ReadMe.md
 ../samples/java/jniviewer/ReadMe.md
-../samples/ios/UIKitSample/ReadMe.md
 
 tutorial/tutorial.md
 
@@ -32,7 +31,6 @@ user_guides/xde/xde.md
 user_guides/ocaf/ocaf.md
 user_guides/tobj/tobj.md
 user_guides/draw_test_harness/draw_test_harness.md
-user_guides/inspector/inspector.md
 user_guides/brep_wp/brep_wp.md
 user_guides/vis/vis.md
 

dox/FILES_PDF.txt

@@ -14,7 +14,6 @@ user_guides/shape_healing/shape_healing.md
 user_guides/ocaf/ocaf.md
 user_guides/step/step.md
 user_guides/draw_test_harness/draw_test_harness.md
-user_guides/inspector/inspector.md
 user_guides/tobj/tobj.md
 user_guides/visualization/visualization.md
 user_guides/xde/xde.md

dox/dev_guides/building/cmake/cmake.md

@@ -97,7 +97,6 @@ The following table gives the full list of environment variables used at the con
 | BUILD_ADDITIONAL_TOOLKITS | String | Semicolon-separated individual toolkits to include into build process. If you want to build some particular libraries (toolkits) only, then you may uncheck all modules in the corresponding *BUILD_MODUE_\<MODULE\>* options and provide the list of necessary libraries here. Of course, all dependencies will be resolved automatically |
 | BUILD_YACCLEX | Boolean flag | Enables Flex/Bison lexical analyzers. OCCT source files relating to STEP reader and ExprIntrp functionality are generated automatically with Flex/Bison. Checking this option leads to automatic search of Flex/Bison binaries and regeneration of the mentioned files |
 | BUILD_MODULE_MfcSamples | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
-| BUILD_Inspector | Boolean flag | Indicates whether Inspector should be built together with OCCT. |
 | BUILD_DOC_Overview | Boolean flag | Indicates whether OCCT overview documentation project should be created together with OCCT. It is not built together with OCCT. Checking this option leads to automatic search of Doxygen binaries. Its building calls Doxygen command to generate the documentation in HTML format |
 | BUILD_PATCH | Path | Points to the directory recognized as a "patch" for OCCT. If specified, the files from this directory take precedence over the corresponding native OCCT sources. This way you are able to introduce patches to Open CASCADE Technology not affecting the original source distribution |
 | BUILD_WITH_DEBUG | Boolean flag | Enables extended messages of many OCCT algorithms, usually printed to cout. These include messages on internal errors and special cases encountered, timing, etc. |

dox/dev_guides/contribution_workflow/contribution_workflow.md

@@ -204,7 +204,7 @@ In a general case, the following elements should be present:
 Example:
 
 > *0026330: BRepOffsetAPI_ThruSections creates invalid shape.*
->
+> 
 > *Methods BRep_Tool::CurveOnSurface() and BRepCheck_Edge::InContext() now properly handle parametric range on a 3D curve when it is used to generate a p-curve dynamically (on a planar surface) and both the surface and the 3D curve have non-null locations.*
 
 Provide sufficient context so that potential user of the affected functionality can understand what has been changed and how the algorithm works now.

dox/dev_guides/documentation/documentation.md

@@ -352,21 +352,6 @@ Smaller code blocks can be inserted by wrapping with tags <i>\@code</i> and <i>\
 
 Verbatim content (same as code but without syntax highlighting) can be inserted by wrapping with tags <i>\@verbatim</i> and <i>\@endverbatim</i>.
 
-@subsection  OCCT_DM_SECTION_A_5a Quotes
-
-Text quoted from other sources can be indented using ">" tag. For example:
-
-@verbatim
-> [Regression in 6.9.0] *IGES - Export of a reversed face leads to wrong data*
-@endverbatim
-
-will produce 
-
-> [Regression in 6.9.0] *IGES - Export of a reversed face leads to wrong data*
-
-Note that this tag should prefix each line of the quoted text.
-Empty lines in the quoted text, if any, should not have trailing spaces after the ">" (lines with trailing spaces will break the quote block).
-
 @subsection  OCCT_DM_SECTION_A_6 References
 
 To insert a reference to a website, it is sufficient to write an URL.

dox/dev_guides/tests/tests.md

@@ -192,11 +192,7 @@ Use prefix <i>bug</i> followed by Mantis issue ID and, if necessary, additional
 	*	If the test case reports error due to an existing problem and the fix is not available, add @ref testmanual_3_6 "TODO" statement for each error to mark it as a known problem. The TODO statements must be specific so as to match the actually generated messages but not all similar errors.
 	*	To check expected output which should be obtained as the test result, add @ref testmanual_3_7 "REQUIRED" statement for each line of output to mark it as required.
 	*	If the test case produces error messages (contained in parse.rules), which are expected in that test and should not be considered as its failure (e.g. test for *checkshape* command), add REQUIRED statement for each error to mark it as required output.
-4.	To check whether the data files needed for the test are already present in the database, use DRAW command *testfile* (see below).
-    If the data file is already present, use it for new test instead of adding a duplicate.
-    If the data file(s) are not yet present in the test database, put them to some folder and add it to the environment variable *CSF_TestDataPath* to be found by the test system.
-    Information on where the data files can be accessed by OCC team for putting to official database should be provided in comment to Mantis issue, clearly indicating how names of the files used by the test script match the actual names of the files.
-    The simplest way is to attach the data files to the Mantis issue, with the same names as used by the test script.
+4.	If the test uses data file(s) that are not yet present in the test database, it is possible to put them to (sub)directory pointed out by *CSF_TestDataPath* variable for running test. The files should be attached to the Mantis issue corresponding to the tested modification.
 5.	Check that the test case runs as expected (test for fix: OK with the fix, FAILED without the fix; test for existing problem: BAD), and integrate it to the Git branch created for the issue.
 
 Example:
@@ -222,33 +218,6 @@ fixshape result a 0.01 0.01
 checkshape result
 ~~~~~
 
-DRAW command testfile should be used to check the data files being used by the test for possible duplication of content or names.
-The command accepts list of paths to files being checked as single argument, and will give conclusion on each of the files, for instance:
-
-~~~~~
-Draw[1]> testfile [glob /my/data/path/bug12345*]
-Collecting info on test data files repository...
-Checking new file(s)...
-
-* /my/data/path/bug12345.brep: duplicate
-  already present under name bug28773_1.brep
-  --> //server/occt_tests_data/public/brep/bug28773_1.brep
-
-* /my/data/path/cadso.brep: new file
-  Warning: DOS encoding detected, consider converting to
-           UNIX unless DOS line ends are needed for the test
-  Warning: shape contains triangulation (946 triangles),
-           consider removing them unless they are needed for the test!
-  BREP size=201 KiB, nbfaces=33, nbedges=94 -> private
-
-* /my/data/path/case_8_wire3.brep: already present
-  --> //server/occt_tests_data/public/brep/case_8_wire3.brep
-
-* /my/data/path/case_8_wire4.brep: error
-  name is already used by existing file
-  --> //server/occt_tests_data/public/brep/case_8_wire4.brep
-~~~~~
-
 @section testmanual_2 Organization of Test Scripts
 
 @subsection testmanual_2_1 General Layout

dox/dev_guides/upgrade/upgrade.md

@@ -1156,13 +1156,7 @@ The following obsolete features have been removed:
 * The method Perform of the *ShapeConstruct_ProjectCurveOnSurface* class is modified:
   - input arguments *continuity*, *maxdeg*, *nbinterval* have been removed as unused;
   - input arguments *TolFirst*, *TolLast* have been added at the end of arguments' list.
-* Typedefs Quantity_Factor, Quantity_Parameter, Quantity_Ratio, Quantity_Coefficient, Quantity_PlaneAngle, Quantity_Length, V3d_Parameter and V3d_Coordinate have been removed; Standard_Real should be used instead.
-
-@subsection upgrade_occt720_reshape_oriented_removed Corrections in BRepOffset API
-
-In classes *BRepTools_ReShape* and *ShapeBuild_ReShape*, the possibility to process shapes different only by orientation in different ways has been removed.
-Thus methods *Remove()* and *Replace()* do not have any more the last argument 'oriented'; they work always as if *Standard_False* was passed before (default behavior).
-Methods *ModeConsiderLo()* and *Apply()* with three arguments have been removed.
+* The functionality to process shapes different only in orientation by different ways was removed from types *BRepTools_ReShape* and *ShapeBuild_ReShape*.
 
 @subsection upgrade_occt720_correction_of_Offset_API Corrections in BRepOffset API
 
@@ -1219,8 +1213,6 @@ Management of highlight attributes has been revised and might require modificati
   - *myZLayer*, replaced by *myDrawer->ZLayer()*
 * The method *PrsMgr_PresentationManager::Unhighlight()* taking Display Mode as an argument has been marked deprecated.
   Implementation now performs unhighlighting of all highlighted presentation mode.
-* The methods taking/returning *Quantity_NameOfColor* (predefined list of colors) and duplicating methods operating with *Quantity_Color* (definition of arbitrary RGB color) in AIS have been removed.
-  *Quantity_Color* should be now used instead.
 
 @subsection upgrade_720_implicit_viewer_update Elimination of implicit 3D Viewer updates
 
@@ -1234,7 +1226,7 @@ To avoid such issues, the interface has been modified and default value has been
 Therefore, old application code should be updated to set the flag theToUpdateViewer explicitly
 to desired value (TRUE to preserve old previous behavior), if it was not already set.
 
-The following AIS_InteractiveContext methods have been changed:
+The follow AIS_InteractiveContext methods have been changed:
   Display, Erase, EraseAll, DisplayAll, EraseSelected, DisplaySelected, ClearPrs, Remove, RemoveAll, Hilight,
   HilightWithColor, Unhilight, Redisplay, RecomputePrsOnly, Update, SetDisplayMode, UnsetDisplayMode, SetColor,
   UnsetColor, SetWidth, UnsetWidth, SetMaterial, UnsetMaterial, SetTransparency, UnsetTransparency,
@@ -1281,8 +1273,7 @@ In most cases this change should be transparent, however applications implementi
 * Package BVH now uses opencascade::handle instead of NCollection_Handle (for classes BVH_Properties, BVH_Builder, BVH_Tree, BVH_Object).
   Application code using BVH package directly should be updated accordingly.
 * AIS_Shape now computes UV texture coordinates for AIS_Shaded presentation in case if texture mapping is enabled within Shaded Attributes.
-  Therefore, redundant class *AIS_TexturedShape is now deprecated* - applications can use *AIS_Shape* directly (texture mapping should be defined through AIS_Shape::Attributes()).
-* Methods for managing active texture within OpenGl_Workspace class (ActiveTexture(), DisableTexture(), EnableTexture()) have been moved to *OpenGl_Context::BindTextures()*.
+  Therefore, redundant class AIS_TexturedShape has been marked deprecated - applications can use AIS_Shape directly (texture mapping should be defined through AIS_Shape::Attributes()).
 
 @subsection upgrade_720_BOP_DataStructure BOP - Pairs of interfering indices
 
@@ -1307,14 +1298,14 @@ In most cases this change should be transparent, however applications implementi
 
 
 @subsection upgrade_720_persistence Restore OCCT 6.9.1 persistence
-
-The capability of reading / writing files in old format using *Storage_ShapeSchema* functionality from OCCT 6.9.1 has been restored in OCCT 7.2.0.
+  
+The capability of reading / writing files in old format using *Storage_ShapeSchema* functionality from OCCT 6.9.1 has been restored in OCCT 7.2.0. 
 
 One can use this functionality in two ways:
 - invoke DRAW Test Harness commands *fsdread / fsdwrite* for shapes;
 - call *StdStorage* class *Read / Write* functions in custom code.
 
-The code example below demonstrates how to read shapes from a storage driver using *StdStorage* class.
+The code example below demonstrates how to read shapes from a storage driver using *StdStorage* class. 
 
 ~~~~
 // aDriver should be created and opened for reading
@@ -1362,7 +1353,7 @@ NCollection_Handle<Storage_BaseDriver> aFileDriver(new FSD_File());
 try
 {
   OCC_CATCH_SIGNALS
-  PCDM_ReadWriter::Open (*aFileDriver, TCollection_ExtendedString(theFilename), Storage_VSWrite);
+  PCDM_ReadWriter::Open(*aFileDriver, TCollection_ExtendedString(CStringA(filename).GetBuffer()), Storage_VSWrite);
 }
 catch (Standard_Failure& e)
 {
@@ -1370,7 +1361,7 @@ catch (Standard_Failure& e)
 }
 
 // Create a storage data instance
-Handle(StdStorage_Data) aData = new StdStorage_Data();
+Handle(StdStorage_Data) aData = new StdStorage_Data;
 // Set an axiliary application name (optional)
 aData->HeaderData()->SetApplicationName(TCollection_ExtendedString("Application"));
 
@@ -1389,7 +1380,8 @@ for (Standard_Integer i = 1; i <= shapes.Length(); ++i)
   }
 
   // Construct a root name
-  TCollection_AsciiString aName = TCollection_AsciiString("Shape_") + i;
+  TCollection_AsciiString aName = "Shape_";
+  aName += i;
 
   // Add a root to storage data
   Handle(StdStorage_Root) aRoot = new StdStorage_Root(aName, aPShape);
@@ -1406,17 +1398,17 @@ if (anError != Storage_VSOk)
 
 @subsection upgrade_720_Change_In_BRepLib_MakeFace_Algo Change in BRepLib_MakeFace algorithm
 
-Previously, *BRepLib_MakeFace* algorithm changed orientation of the source wire in order to avoid creation of face as a hole (i.e. it is impossible to create the entire face as a hole; the hole can be created in context of another face only). New algorithm does not reverse the wire if it is open. Material of the face for the open wire will be located on the left side from the source wire.
+  Previously, *BRepLib_MakeFace* algorithm changed orientation of the source wire in order to avoid creation of face as a hole (i.e. it is impossible to create the entire face as a hole; the hole can be created in context of another face only). New algorithm does not reverse the wire if it is open. Material of the face for the open wire will be located on the left side from the source wire.
 
 @subsection upgrade_720_Change_In_BRepFill_OffsetWire Change in BRepFill_OffsetWire algorithm
 
-From now on, the offset  will always be directed to the outer region in case of positive offset value and to the inner region in case of negative offset value.
-Inner/Outer region for an open wire is defined by the following rule:
-when we go along the wire (taking into account edges orientation) the outer region will be on the right side, the inner region will be on the left side.
-In case of a closed wire, the inner region will always be inside the wire (at that, the edges orientation is not taken into account).
-
+  From now on, the offset  will always be directed to the outer region in case of positive offset value and to the inner region in case of negative offset value.
+  Inner/Outer region for an open wire is defined by the following rule:
+    when we go along the wire (taking into account edges orientation) the outer region will be on the right side, the inner region will be on the left side.
+  In case of a closed wire, the inner region will always be inside the wire (at that, the edges orientation is not taken into account).
+  
 @subsection upgrade_720_Change_In_GeomAdaptor_Curve Change in Geom(2d)Adaptor_Curve::IsPeriodic
-
+  
 Since 7.2.0 version, method *IsPeriodic()* returns the corresponding status of periodicity of the basis curve regardless of closure status of the adaptor curve (see method *IsClosed()*).
 Method *IsClosed()* for adaptor can return false even on periodic curve, in the case if its parametric range is not full period, e.g. for adaptor on circle in range [0, @f$ \pi @f$].
 In previous versions, *IsPeriodic()* always returned false if *IsClosed()* returned false.

dox/overview/overview.md

@@ -18,7 +18,7 @@ modeling (CAD), manufacturing / measuring (CAM) or numerical simulation (CAE).
 @section OCCT_OVW_SECTION_2 Copyrights
 
 Open CASCADE Technology and all materials, including this documentation, is 
-Copyright (c) 1999-2017 by OPEN CASCADE S.A.S. All rights reserved.
+Copyright (c) 1999-2016 by OPEN CASCADE S.A.S. All rights reserved.
 
 @htmlonly<center>@endhtmlonly
 https://www.opencascade.com
@@ -83,28 +83,28 @@ To use Tcl/Tk, please refer to the Licensing Terms (https://www.tcl.tk/software/
 
 **GL2PS** is developed by Christophe Geuzaine and others. It is optionally used by OCCT to
 export content of OpenGL scene to vector graphics formats (PS, PDF, EMF, SVG). 
-The library is licensed under GL2PS license (http://www.geuz.org/gl2ps/COPYING.GL2PS).
+The library is licensed under GL2PS LICENSE https://www.geuz.org/gl2ps/COPYING.GL2PS Version 2, November 2003.
 
 **FreeType 2** is developed by Antoine Leca, David Turner, Werner Lemberg and others. 
 It is a software font engine that is designed to be small, efficient, highly customizable and 
 portable while capable of producing high-quality output (glyph images). This product 
 can be used in graphic libraries, display servers, font conversion tools, 
 text image generation tools, and many other products.
-FreeType 2 is released under two open-source licenses: BSD-like FreeType License and the GPL (https://www.freetype.org/license.html).
+
+FreeType 2 is released under two open-source licenses: BSD-like FreeType License and the GPL.
 
 **Intel(R) Threading Building Blocks (TBB)** offers a rich and complete approach to expressing parallelism in a C++ program. 
 It is a library that helps you to take advantage of multi-core processor performance without having to be a threading expert. 
 Threading Building Blocks is not just a threads-replacement library. It represents a higher-level, task-based parallelism that 
 abstracts platform details and threading mechanisms for scalability and performance. 
-TBB version 2017 is available under Apache 2.0 license, while older versions 
-until 4.4 are available under GPLv2 license with the runtime exception (https://www.threadingbuildingblocks.org).
+TBB is available under GPLv2 license with the runtime exception.
 
 **OpenGL** is an industry standard API for 3D graphics used by OCCT for 
 implementation of 3D viewer. OpenGL specification is developed by the
 Khronos group, https://www.khronos.org/opengl/. OCCT code includes header 
 file *glext.h* obtained from Khronos web site.
 
-**VTK** -- The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, please, refer to VTK Homepage http://www.vtk.org/.
+**VTK** -- The **Visualization Toolkit (VTK)** is an open-source, freely available software system for 3D computer graphics, image processing and visualization. OCCT VIS component provides adaptation functionality for visualization of OCCT topological shapes by means of VTK library. If you need further information on VTK, please, refer to VTK Homepage https://www.vtk.org/.
 
 **Doxygen** developed by Dimitri van Heesch is open source documentation system for 
 C++, C, Java, Objective-C, Python, IDL, PHP and C#. This product is used in Open CASCADE Technology 
@@ -115,17 +115,17 @@ If you need further information on Doxygen, please refer to https://www.stack.nl
 Graph visualization is representiation of structured information as diagrams of abstract graphs and networks. 
 This product is used together with Doxygen in Open CASCADE Technology for automatic creation of Technical Documentation 
 (generation of dependency graphs). Current versions of Graphviz are licensed on an open source 
-basis under The Eclipse Public License (EPL) (http://www.graphviz.org/License.php).
+basis under The Eclipse Public License (EPL) (https://www.graphviz.org/License.php).
 
 **Inno Setup** is a free script-driven installation system created in CodeGear Delphi by Jordan Russell. 
 In OCCT Inno Setup is used to create Installation Wizard on Windows. 
-It is licensed under Inno Setup License (http://www.jrsoftware.org/files/is/license.txt).
+It is licensed under Inno Setup License (https://www.jrsoftware.org/files/is/license.txt).
 
 **FreeImage** is an Open Source library supporting popular graphics image formats, such as PNG, BMP, JPEG, TIFF, 
 and others used by multimedia applications. This library is developed by Hervé Drolon and Floris van den Berg. 
 FreeImage is easy to use, fast, multithreading safe, compatible with all 32-bit or 64-bit versions of Windows, 
 and cross-platform (works both with Linux and Mac OS X). FreeImage is optionally used by OCCT to work
-with images, on conditions of the FreeImage Public License (FIPL) (http://freeimage.sourceforge.net/freeimage-license.txt).
+with images, on conditions of the FreeImage Public License (FIPL) (https://freeimage.sourceforge.net/freeimage-license.txt).
 
 **CMake** is an open-source, cross-platform family of tools designed to build, test and package software. CMake is used to control the software compilation process using simple platform and compiler independent configuration files, and generate native makefiles and workspaces that can be used in the compiler environment of your choice. 
 OCCT uses CMake as a build system. CMake is available under BSD 3-Clause license. See more at https://cmake.org/
@@ -196,7 +196,7 @@ for which OCCT is certified to work.
 
 | OS        | Compiler |
 | --------- | ----------- |
-| Windows   | Microsoft Visual Studio: 2010 SP1<sup>1</sup>, 2012 Update 4, 2013 Update 5, 2015, 2017 <br> Intel C++ Composer XE 2013 SP1 <br> GCC 4.3+ (Mingw-w64)|
+| Windows   | Microsoft Visual Studio: 2010 SP1<sup>1</sup>, 2012 Update 4, 2013 Update 5, 2015 <br> Intel C++ Composer XE 2013 SP1 <br> GCC 4.3+ (Mingw-w64)|
 | Linux     | GNU gcc 4.3+ <br> LLVM CLang 3.6+ |
 | OS X      | XCode 6 or newer |
 | Android   | NDK r10, GNU gcc 4.8 or newer |
@@ -209,15 +209,15 @@ for which OCCT is certified to work.
 | Component | Requirement |
 | --------- | ----------- |
 | Graphic library | OpenGL 3.3+, OpenGL ES 2.0+ <br> Direct3D 9 |
-| Qt (for samples and demos) | Desktop: Qt 4.8.6+ https://www.qt.io/download/ <br> Android: Qt 5.3.2+ https://www.qt.io/download/ |
-| TCL (for testing tools)    | Tcl/Tk 8.6.3+ https://www.tcl.tk/software/tcltk/download.html <br> or ActiveTcl 8.6 https://www.activestate.com/activetcl/downloads (for Windows)| 
-| Freetype (for text rendering) | FreeType 2.4.11-2.5.5 https://sourceforge.net/projects/freetype/files/ |
-| FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ https://sourceforge.net/projects/freeimage/files |
-| FFmpeg (optional, for video recording) | FFmpeg 3.1+ https://www.ffmpeg.org/download.html |
+| Qt (for samples and demos) | Desktop: Qt 4.8.6+ http://www.qt.io/download/ <br> Android: Qt 5.3.2+ http://www.qt.io/download/ |
+| TCL (for testing tools)    | Tcl/Tk 8.6.3+ http://www.tcl.tk/software/tcltk/download.html <br> or ActiveTcl 8.6 http://www.activestate.com/activetcl/downloads (for Windows)| 
+| Freetype (for text rendering) | FreeType 2.4.11-2.5.5 http://sourceforge.net/projects/freetype/files/ |
+| FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ http://sourceforge.net/projects/freeimage/files |
+| FFmpeg (optional, for video recording) | FFmpeg 3.1+ https://www.ffmpeg.org |
 | gl2ps (optional, for export contents of OCCT viewer to vector formats) | gl2ps-1.3.8+  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x https://www.threadingbuildingblocks.org/ |
-| VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/download/ |
-| Doxygen (optional for building documentation) | Doxygen 1.8.5+ https://www.stack.nl/~dimitri/doxygen/download.html |
+| Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x http://www.threadingbuildingblocks.org/ |
+| VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/VTK/resources/software.html |
+| Doxygen (optional for building documentation) | Doxygen 1.8.5+ http://www.stack.nl/~dimitri/doxygen/download.html |
 
 @subsection overview_req_hw Hardware
 
@@ -534,11 +534,11 @@ Export:
   * Stl
   * Vrml
 
-See \subpage samples_csharp_occt "C# sample Readme" for details.
+See \subpage samples_csharp_occt "Readme" for details.
 
 There is also another C# example with the same functionality, which demonstrates the integration of Direct3D Viewer into .NET applications using WPF front end.
 
-See \subpage samples_csharp_direct3d "Direct3D C# sample Readme" for details.
+See \subpage samples_csharp_direct3d "Readme" for details.
 
 @subsubsection OCCT_OVW_SECTION_7_3_4 Android
 
@@ -546,16 +546,8 @@ There are two samples are representing usage OCCT framework on Android mobile pl
 
 jniviewer
 @figure{/overview/images/samples_java_android_occt.jpg}
-Java -- See \subpage samples_java_android_occt "Android Java sample Readme" for details.
+Java -- See \subpage samples_java_android_occt "Readme" for details.
 
 AndroidQt
 @figure{/overview/images/samples_qml_android_occt.jpg}
-Qt -- See \subpage samples_qml_android_occt "Android Qt sample Readme" for details.
-
-@subsubsection OCCT_OVW_SECTION_7_3_5 iOS
-
-There is a sample demonstrating usage of OCCT on iOS with Apple UIKit framework.
-
-@figure{/overview/images/sample_ios_uikit.png}
-
-See \subpage occt_samples_ios_uikit "iOS sample Readme" for details.
+Qt -- See \subpage samples_qml_android_occt "Readme" for details.

dox/user_guides/draw_test_harness/draw_test_harness.md

@@ -10687,87 +10687,6 @@ Example:
 mdist
 ~~~~~
 
-@section occt_draw_13 Inspector commands
-
-
-This section describes commands that make possible to use Inspector.
-
-@subsection occt_draw_13_1 tinspector
-
-Syntax:                  
-~~~~~
-tinspector [-plugins {name1 ... [nameN] | all}]
-           [-activate name]
-           [-shape object [name1] ... [nameN]]
-           [-open file_name [name1] ... [nameN]]
-           [-update]
-           [-select {object | name1 ... [nameN]}]
-           [-show {0|1} = 1]
-~~~~~
-Starts tool of inspection.
-Options:
-* *plugins* enters plugins that should be added in the inspector.
-Available names are: dfbrowser, vinspector and shapeview.
-Plugins order will be the same as defined in arguments.
-'all' adds all available plugins in the order:
-DFBrowser, VInspector and ShapeView.
-If at the first call this option is not used, 'all' option is applyed;
-* *activate* activates the plugin in the tool view.
-If at the first call this option is not used, the first plugin is activated;
-* *shape* initializes plugin/s by the shape object. If 'name' is empty, initializes all plugins;
-* *open* gives the file to the plugin/s. If the plugin is active, after open, update content will be done;
-* *update* updates content of the active plugin;
-* *select* sets the parameter that should be selected in an active tool view.
-Depending on active tool the parameter is:
-ShapeView: 'object' is an instance of TopoDS_Shape TShape,
-DFBrowser: 'name' is an entry of TDF_Label and name2(optionaly) for TDF_Attribute type name,
-VInspector: 'object' is an instance of AIS_InteractiveObject;
-* *show* sets Inspector view visible or hidden. The first call of this command will show it.
-
-**Example:** 
-~~~~~
-pload DCAF INSPECTOR
-
-NewDocument Doc BinOcaf
-
-set aSetAttr1 100
-set aLabel 0:2
-SetInteger Doc ${aLabel} ${aSetAttr1}
-
-tinspector -plugins dfbrowser -select 0:2 TDataStd_Integer
-~~~~~ 
-
-**Example:** 
-~~~~~
-pload ALL INSPECTOR
-
-box b1 200 100 120
-box b2 100 200 220 100 120 100
-
-tinspector -plugins shapeview -shape b1 -shape b2 -select b1
-~~~~~ 
-
-**Example:** 
-~~~~~
-pload ALL INSPECTOR
-
-tinspector -plugins vinspector
-
-vinit
-box box_1 100 100 100
-vdisplay box_1
-
-box box_2 180 120 200 150 150 150
-vdisplay box_2
-
-vfit
-vselmode box_1 1 1
-vselmode box_1 3 1
-
-tinspector -update -select box_1
-~~~~~ 
-
-
 @section occt_draw_11 Extending Test Harness with custom commands
 
 

dox/user_guides/inspector/images/3DView_elements.svg

@@ -1,224 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="165.36458mm"
-   height="99.483337mm"
-   viewBox="0 0 165.36458 99.483337"
-   version="1.1"
-   id="svg8"
-   sodipodi:docname="3DView_elements.svg"
-   inkscape:version="0.92.2 (5c3e80d, 2017-08-06)">
-  <defs
-     id="defs2" />
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="0.98994949"
-     inkscape:cx="237.05748"
-     inkscape:cy="217.01184"
-     inkscape:document-units="mm"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     inkscape:window-width="1410"
-     inkscape:window-height="786"
-     inkscape:window-x="265"
-     inkscape:window-y="101"
-     inkscape:window-maximized="0"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     showborder="true"
-     inkscape:showpageshadow="false" />
-  <metadata
-     id="metadata5">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-208.35938,-140.66904)">
-    <rect
-       style="opacity:1;fill:#000000;fill-opacity:0;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4147-9"
-       width="164.83542"
-       height="98.95417"
-       x="208.62396"
-       y="140.93362"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#bfbfbf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5"
-       width="155.95102"
-       height="20.214758"
-       x="212.62312"
-       y="145.17099"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#bfbfbf;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4159-1"
-       width="155.83388"
-       height="64.776878"
-       x="212.62471"
-       y="170.05089"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620295;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-1"
-       width="30.417513"
-       height="11.316654"
-       x="286.53876"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620295;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-5-9"
-       width="30.417513"
-       height="11.316654"
-       x="321.21384"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="295.72775"
-       y="156.1628"
-       id="text5675-5"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-3"
-         x="295.72775"
-         y="156.1628"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Single</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="331.03946"
-       y="156.53418"
-       id="text5679-5"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5681-0"
-         x="331.03946"
-         y="156.53418"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Clean</tspan></text>
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.45057005;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8-33"
-       width="14.354354"
-       height="56.42762"
-       x="216.9996"
-       y="174.34537"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.83517319;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-7-0"
-       width="67.939919"
-       height="26.352776"
-       x="265.93634"
-       y="189.26295"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.3866663px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="295.6308"
-       y="201.46571"
-       id="text5683-5-2"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-7"
-         x="295.6308"
-         y="201.46571"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">3D view</tspan></text>
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620298;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-1-3"
-       width="30.417513"
-       height="11.316654"
-       x="217.1886"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="227.84984"
-       y="156.48491"
-       id="text5675-5-2"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-3-2"
-         x="227.84984"
-         y="156.48491"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">View</tspan></text>
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620298;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-1-9"
-       width="30.417513"
-       height="11.316654"
-       x="251.86369"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="262.35156"
-       y="156.53418"
-       id="text5675-5-9"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-3-0"
-         x="262.35156"
-         y="156.53418"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Multi</tspan></text>
-  </g>
-</svg>

dox/user_guides/inspector/images/dfbrowser_elements.svg

@@ -1,284 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="165.36443mm"
-   height="99.48317mm"
-   viewBox="0 0 165.36443 99.48317"
-   version="1.1"
-   id="svg1643"
-   inkscape:version="0.92.2 (5c3e80d, 2017-08-06)"
-   sodipodi:docname="dfbrowser_elements.svg">
-  <defs
-     id="defs1637" />
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1"
-     inkscape:cx="290.24314"
-     inkscape:cy="320.3071"
-     inkscape:document-units="mm"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:showpageshadow="false"
-     inkscape:window-width="1246"
-     inkscape:window-height="857"
-     inkscape:window-x="371"
-     inkscape:window-y="37"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata1640">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(356.33698,30.17611)">
-    <rect
-       style="opacity:1;fill:#000000;fill-opacity:0;fill-rule:evenodd;stroke:#78943d;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4147"
-       width="164.83542"
-       height="98.95417"
-       x="-356.07248"
-       y="-29.91161"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#9bbb59;fill-opacity:1;fill-rule:evenodd;stroke:#78943d;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157"
-       width="155.951"
-       height="20.214758"
-       x="-352.0733"
-       y="-25.674246"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#9bbb59;fill-opacity:1;fill-rule:evenodd;stroke:#78943d;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4159"
-       width="75.795822"
-       height="64.91011"
-       x="-352.07172"
-       y="-0.79434544"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#9bbb59;fill-opacity:1;fill-rule:evenodd;stroke:#78943d;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4161-4"
-       width="75.811562"
-       height="30.252827"
-       x="-272.04941"
-       y="33.729694"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#9bbb59;fill-opacity:1;fill-rule:evenodd;stroke:#78943d;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4161-4-8"
-       width="75.811562"
-       height="30.252827"
-       x="-272.04941"
-       y="-0.80220562"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.56444448;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195"
-       width="73.552574"
-       height="11.118413"
-       x="-347.50781"
-       y="-21.126072"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620289;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1"
-       width="30.417513"
-       height="11.316654"
-       x="-267.92496"
-       y="-21.225193"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620289;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-5"
-       width="30.417513"
-       height="11.316654"
-       x="-231.57631"
-       y="-21.225193"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-259.7175"
-       y="-14.48304"
-       id="text5675"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677"
-         x="-259.7175"
-         y="-14.48304"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Update</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-223.04579"
-       y="-14.12208"
-       id="text5679"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5681"
-         x="-223.04579"
-         y="-14.12208"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Search</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-325.95343"
-       y="-14.547463"
-       id="text5683"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685"
-         x="-325.95343"
-         y="-14.547463"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Tree Navigation</tspan></text>
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.56444448;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8"
-       width="65.570122"
-       height="19.385952"
-       x="-347.50781"
-       y="11.248657"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666654px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-333.31332"
-       y="22.090868"
-       id="text5683-5"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3"
-         x="-333.31332"
-         y="22.090868"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">OCAF tree view</tspan></text>
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.56444448;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8-0"
-       width="65.570122"
-       height="19.385952"
-       x="-267.68332"
-       y="3.9789243"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.56444448;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8-3-5"
-       width="38.7719"
-       height="16.820164"
-       x="-267.11316"
-       y="37.191612"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#9bbb59;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8-3"
-       width="38.7719"
-       height="16.820164"
-       x="-240.60002"
-       y="42.180641"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666654px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-252.8326"
-       y="13.779153"
-       id="text5683-5-9"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-8"
-         x="-252.8326"
-         y="13.779153"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">Property Panel</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666654px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-231.82542"
-       y="51.393177"
-       id="text5683-5-0"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-5"
-         x="-231.82542"
-         y="51.393177"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">3D View</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666654px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-267.25568"
-       y="46.086102"
-       id="text5683-5-1"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\dfbrowser.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-80"
-         x="-267.25568"
-         y="46.086102"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">Dump View</tspan></text>
-  </g>
-</svg>

dox/user_guides/inspector/images/shapeview_elements.svg

@@ -1,142 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="165.36458mm"
-   height="99.483337mm"
-   viewBox="0 0 165.36458 99.483337"
-   version="1.1"
-   id="svg2491"
-   inkscape:version="0.92.2 (5c3e80d, 2017-08-06)"
-   sodipodi:docname="shapeview_elements.svg">
-  <defs
-     id="defs2485" />
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="0.98994949"
-     inkscape:cx="319.53221"
-     inkscape:cy="223.36826"
-     inkscape:document-units="mm"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     inkscape:showpageshadow="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="1205"
-     inkscape:window-height="766"
-     inkscape:window-x="422"
-     inkscape:window-y="28"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata2488">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(293.59301,-77.169049)">
-    <rect
-       style="opacity:1;fill:#000000;fill-opacity:0;fill-rule:evenodd;stroke:#ffa040;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4147-0-8"
-       width="164.83542"
-       height="98.95417"
-       x="-293.32843"
-       y="77.433632"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\shapeview.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#fcd5b5;fill-opacity:1;fill-rule:evenodd;stroke:#ff9933;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4159-8"
-       width="70.094536"
-       height="85.011993"
-       x="-285.46909"
-       y="83.598381"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\shapeview.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.62230003;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8-2"
-       width="54.993557"
-       height="25.389547"
-       x="-277.91861"
-       y="113.40961"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\shapeview.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#fcd5b5;fill-opacity:1;fill-rule:evenodd;stroke:#ffa040;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4159-8-9"
-       width="70.094536"
-       height="85.011993"
-       x="-207.25319"
-       y="83.598389"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\shapeview.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.56444448;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8-2-4"
-       width="54.993557"
-       height="25.389547"
-       x="-199.70271"
-       y="113.40961"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\shapeview.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.3866663px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-272.88153"
-       y="125.70056"
-       id="text5683-5-4-9"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\shapeview.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-59-2"
-         x="-272.88153"
-         y="125.70056"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">TopoDS_Shape View</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.3866663px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-182.24478"
-       y="126.02359"
-       id="text5683-5-0-0"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\shapeview.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-5-6"
-         x="-182.24478"
-         y="126.02359"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">3D View</tspan></text>
-  </g>
-</svg>

dox/user_guides/inspector/images/tinspector_elements.svg

@@ -1,244 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="164.48495mm"
-   height="98.635941mm"
-   viewBox="0 0 164.48495 98.635941"
-   version="1.1"
-   id="svg8"
-   sodipodi:docname="tinspector_elements.svg"
-   inkscape:version="0.92.2 (5c3e80d, 2017-08-06)">
-  <defs
-     id="defs2">
-    <pattern
-       y="0"
-       x="0"
-       height="6"
-       width="6"
-       patternUnits="userSpaceOnUse"
-       id="EMFhbasepattern" />
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1.4"
-     inkscape:cx="329.8397"
-     inkscape:cy="227.89271"
-     inkscape:document-units="mm"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     inkscape:window-width="1575"
-     inkscape:window-height="895"
-     inkscape:window-x="46"
-     inkscape:window-y="75"
-     inkscape:window-maximized="0"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0" />
-  <metadata
-     id="metadata5">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-23.06172,-25.84832)">
-    <path
-       id="path933"
-       d="M 23.326301,26.112901 H 187.28209 V 124.21968 H 23.326301 Z"
-       style="fill:none;stroke:#953735;stroke-width:0.52916276px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path935"
-       d="M 28.109932,31.192871 H 62.95001 v 12.97507 H 28.109932 Z"
-       style="fill:#9bbb59;fill-opacity:1;fill-rule:nonzero;stroke:#71893f;stroke-width:0.52916276px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path937"
-       d="m 66.54831,31.108201 h 34.84008 v 12.97507 H 66.54831 Z"
-       style="fill:none;stroke:#33cccc;stroke-width:0.52916276px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path939"
-       d="m 104.9867,31.023531 h 34.84007 v 12.97508 H 104.9867 Z"
-       style="fill:none;stroke:#ff9933;stroke-width:0.52916276px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path941"
-       d="m 37.550195,37.648651 c 0,0.254 -0.04233,0.48683 -0.169332,0.6985 -0.105832,0.21166 -0.253998,0.38099 -0.444497,0.48683 -0.126999,0.0847 -0.275164,0.14816 -0.42333,0.16933 -0.169332,0.0423 -0.35983,0.0635 -0.634995,0.0635 h -0.698495 v -2.83631 h 0.698495 c 0.275165,0 0.48683,0.0212 0.656162,0.0635 0.169332,0.0423 0.296331,0.10583 0.42333,0.16933 0.190498,0.127 0.338664,0.27516 0.444497,0.48683 0.105832,0.1905 0.148165,0.42333 0.148165,0.69849 z m -0.380997,0 c 0,-0.21166 -0.04233,-0.40216 -0.126999,-0.55033 -0.0635,-0.16933 -0.190498,-0.27516 -0.338664,-0.35983 -0.105833,-0.0635 -0.232832,-0.10583 -0.359831,-0.14816 -0.126999,-0.0212 -0.275164,-0.0212 -0.444497,-0.0212 h -0.35983 v 2.18015 h 0.35983 c 0.190499,0 0.338665,-0.0212 0.465664,-0.0423 0.148165,-0.0423 0.275164,-0.0847 0.380997,-0.14817 0.148165,-0.10583 0.253998,-0.21166 0.317498,-0.35983 0.0635,-0.14817 0.105832,-0.33866 0.105832,-0.55033 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path943"
-       d="m 39.963178,36.569161 h -1.418157 v 0.80433 h 1.227658 v 0.33866 h -1.227658 v 1.35466 h -0.380997 v -2.83631 h 1.799154 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path945"
-       d="m 42.524325,38.198981 c 0,0.127 -0.02117,0.254 -0.08467,0.35983 -0.04233,0.10583 -0.126999,0.21167 -0.211665,0.27517 -0.105833,0.0847 -0.211665,0.14816 -0.338664,0.16933 -0.126999,0.0423 -0.296331,0.0635 -0.48683,0.0635 h -1.015992 v -2.83631 h 0.84666 c 0.211665,0 0.359831,0.0212 0.465663,0.0423 0.105833,0 0.190499,0.0423 0.296331,0.0847 0.105833,0.0635 0.169332,0.12699 0.211666,0.21166 0.0635,0.0847 0.08467,0.1905 0.08467,0.29633 0,0.14817 -0.04233,0.254 -0.105832,0.35983 -0.0635,0.0847 -0.169332,0.16933 -0.275165,0.21167 v 0.0212 c 0.190499,0.0423 0.338665,0.127 0.444497,0.254 0.105833,0.12699 0.169332,0.27516 0.169332,0.48683 z m -0.634995,-1.26999 c 0,-0.0847 0,-0.127 -0.02117,-0.16933 -0.04233,-0.0635 -0.0635,-0.0847 -0.126999,-0.127 -0.04233,-0.0212 -0.126999,-0.0423 -0.211665,-0.0635 -0.08467,0 -0.190498,0 -0.317497,0 h -0.444497 v 0.80433 h 0.486829 c 0.127,0 0.211665,0 0.275165,-0.0212 0.08467,0 0.148166,-0.0423 0.190499,-0.0635 0.0635,-0.0423 0.105832,-0.0847 0.126999,-0.14817 0.04233,-0.0635 0.04233,-0.127 0.04233,-0.21166 z m 0.253998,1.26999 c 0,-0.10583 -0.02117,-0.1905 -0.0635,-0.254 -0.02117,-0.0847 -0.08467,-0.127 -0.190498,-0.16933 -0.0635,-0.0423 -0.126999,-0.0635 -0.211665,-0.0635 -0.08467,-0.0212 -0.190499,-0.0212 -0.317498,-0.0212 h -0.592662 v 1.05833 h 0.507996 c 0.148166,0 0.296331,-0.0212 0.402164,-0.0423 0.105832,0 0.190498,-0.0423 0.253998,-0.0847 0.0635,-0.0423 0.126999,-0.10584 0.148165,-0.16933 0.04233,-0.0635 0.0635,-0.14817 0.0635,-0.254 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path947"
-       d="m 44.344645,37.331151 h -0.02117 c -0.04233,-0.0212 -0.105832,-0.0212 -0.148165,-0.0212 -0.04233,0 -0.105833,-0.0212 -0.169332,-0.0212 -0.126999,0 -0.232832,0.0423 -0.317498,0.0847 -0.105832,0.0423 -0.211665,0.10584 -0.296331,0.1905 v 1.50283 h -0.359831 v -2.11663 h 0.359831 v 0.3175 c 0.126999,-0.127 0.253998,-0.21166 0.359831,-0.254 0.105832,-0.0423 0.232831,-0.0635 0.338664,-0.0635 0.0635,0 0.105832,0 0.126999,0 0.04233,0 0.08467,0 0.126999,0.0212 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path949"
-       d="m 46.482462,38.008481 c 0,0.33867 -0.08467,0.61383 -0.253998,0.80433 -0.169332,0.21167 -0.42333,0.3175 -0.719661,0.3175 -0.296331,0 -0.529163,-0.10583 -0.698495,-0.3175 -0.190498,-0.1905 -0.275164,-0.46566 -0.275164,-0.80433 0,-0.35983 0.08467,-0.61383 0.275164,-0.82549 0.169332,-0.1905 0.402164,-0.29633 0.698495,-0.29633 0.296331,0 0.550329,0.10583 0.719661,0.29633 0.169332,0.21166 0.253998,0.46566 0.253998,0.82549 z m -0.35983,0 c 0,-0.27516 -0.04233,-0.48683 -0.169332,-0.61383 -0.105833,-0.127 -0.253998,-0.21166 -0.444497,-0.21166 -0.190499,0 -0.338664,0.0847 -0.444497,0.21166 -0.105832,0.127 -0.169332,0.33867 -0.169332,0.61383 0,0.254 0.0635,0.46567 0.169332,0.59267 0.105833,0.14816 0.253998,0.21166 0.444497,0.21166 0.190499,0 0.338664,-0.0635 0.444497,-0.21166 0.105832,-0.127 0.169332,-0.33867 0.169332,-0.59267 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path951"
-       d="m 49.699771,36.950161 -0.550328,2.11665 h -0.317498 l -0.550329,-1.62982 -0.529163,1.62982 h -0.338664 l -0.550329,-2.11665 h 0.35983 l 0.402164,1.62982 0.529163,-1.62982 h 0.275164 l 0.55033,1.62982 0.35983,-1.62982 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path953"
-       d="m 51.731758,38.452981 c 0,0.1905 -0.08467,0.35983 -0.232834,0.46566 -0.16933,0.127 -0.380997,0.1905 -0.656161,0.1905 -0.169331,0 -0.296331,-0.0212 -0.444497,-0.0423 -0.126998,-0.0423 -0.232831,-0.0847 -0.317498,-0.127 v -0.40216 h 0.02117 c 0.105833,0.0847 0.232833,0.14816 0.380997,0.1905 0.127,0.0635 0.253998,0.0847 0.380998,0.0847 0.169333,0 0.275164,-0.0212 0.380997,-0.0847 0.08467,-0.0423 0.127,-0.127 0.127,-0.23283 0,-0.0847 -0.02117,-0.14817 -0.08467,-0.1905 -0.04233,-0.0423 -0.127,-0.0847 -0.275164,-0.10584 -0.04233,-0.0212 -0.105833,-0.0212 -0.1905,-0.0423 -0.08467,-0.0212 -0.148164,-0.0212 -0.211664,-0.0423 -0.1905,-0.0635 -0.338664,-0.12699 -0.402164,-0.23283 -0.08467,-0.0847 -0.127,-0.21166 -0.127,-0.33866 0,-0.0847 0.02117,-0.16933 0.0635,-0.254 0.04233,-0.0635 0.08467,-0.14817 0.169334,-0.21166 0.0635,-0.0423 0.148164,-0.10584 0.253997,-0.127 0.127,-0.0423 0.232831,-0.0635 0.380997,-0.0635 0.127,0 0.253998,0.0212 0.380998,0.0635 0.126997,0.0212 0.23283,0.0635 0.317497,0.10583 v 0.381 h -0.02117 c -0.08467,-0.0635 -0.190497,-0.127 -0.317497,-0.16934 -0.148167,-0.0423 -0.275164,-0.0635 -0.402164,-0.0635 -0.127,0 -0.232831,0.0212 -0.317497,0.0635 -0.08467,0.0423 -0.127,0.127 -0.127,0.23284 0,0.0847 0.02117,0.14816 0.0635,0.19049 0.0635,0.0423 0.148166,0.0847 0.275164,0.10584 0.0635,0.0212 0.127,0.0212 0.211666,0.0423 0.08466,0.0212 0.148164,0.0423 0.211664,0.0423 0.148167,0.0423 0.275164,0.10583 0.380998,0.1905 0.08467,0.10583 0.127,0.23283 0.127,0.38099 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path955"
-       d="m 54.017739,38.029651 h -1.56632 c 0,0.14816 0.02117,0.254 0.0635,0.35983 0.04233,0.0847 0.08466,0.16933 0.169331,0.23283 0.0635,0.0635 0.127,0.10583 0.23283,0.127 0.08467,0.0423 0.1905,0.0423 0.296334,0.0423 0.148164,0 0.275164,-0.0212 0.423328,-0.0847 0.148166,-0.0423 0.254,-0.10583 0.317497,-0.16933 h 0.02117 v 0.40216 c -0.126998,0.0423 -0.253998,0.0847 -0.359831,0.127 -0.126997,0.0212 -0.275164,0.0423 -0.402161,0.0423 -0.359831,0 -0.634998,-0.0847 -0.825495,-0.27516 -0.1905,-0.1905 -0.296331,-0.46567 -0.296331,-0.8255 0,-0.33866 0.105831,-0.61383 0.275164,-0.82549 0.190498,-0.1905 0.444498,-0.29633 0.761995,-0.29633 0.275164,0 0.507995,0.0847 0.656161,0.254 0.148167,0.16933 0.232831,0.40216 0.232831,0.69849 z m -0.338664,-0.254 c -0.02117,-0.1905 -0.0635,-0.33866 -0.148164,-0.4445 -0.105833,-0.10583 -0.232833,-0.14816 -0.423331,-0.14816 -0.1905,0 -0.338664,0.0423 -0.465664,0.16933 -0.105833,0.10583 -0.16933,0.254 -0.190497,0.42333 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path957"
-       d="m 55.88039,37.331151 h -0.0212 c -0.0635,-0.0212 -0.10583,-0.0212 -0.14816,-0.0212 -0.0635,0 -0.127,-0.0212 -0.1905,-0.0212 -0.10583,0 -0.21166,0.0423 -0.3175,0.0847 -0.10583,0.0423 -0.1905,0.10584 -0.29633,0.1905 v 1.50283 h -0.3598 v -2.11663 h 0.35983 v 0.3175 c 0.14817,-0.127 0.27517,-0.21166 0.381,-0.254 0.10583,-0.0423 0.21166,-0.0635 0.33866,-0.0635 0.0423,0 0.10584,0 0.127,0 0.0212,0 0.0635,0 0.127,0.0212 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path959"
-       d="m 76.00974,35.786001 -1.03715,2.81515 h -0.508 l -1.01599,-2.81515 h 0.40216 l 0.88899,2.47648 0.889,-2.47648 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path961"
-       d="m 77.4279,38.601151 h -1.12182 v -0.27517 h 0.38099 v -2.24365 h -0.38099 v -0.29633 h 1.12182 v 0.29633 h -0.381 v 2.24365 h 0.381 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path963"
-       d="m 79.79855,38.601151 h -0.33866 v -1.18533 c 0,-0.10583 -0.0212,-0.1905 -0.0212,-0.27516 -0.0212,-0.0847 -0.0423,-0.16934 -0.0635,-0.21167 -0.0423,-0.0423 -0.0847,-0.0847 -0.14817,-0.10583 -0.0423,-0.0423 -0.127,-0.0423 -0.21167,-0.0423 -0.10583,0 -0.21166,0.0212 -0.31749,0.0635 -0.10583,0.0423 -0.21167,0.10583 -0.29633,0.1905 v 1.56632 H 78.0417 v -2.11665 h 0.35983 v 0.254 c 0.10583,-0.10584 0.21166,-0.16934 0.33866,-0.23284 0.127,-0.0423 0.23283,-0.0635 0.35983,-0.0635 0.23283,0 0.40217,0.0635 0.52917,0.1905 0.12699,0.14817 0.16933,0.33867 0.16933,0.61383 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path965"
-       d="m 81.99987,38.008481 c 0,0.1905 -0.0635,0.33867 -0.23283,0.46567 -0.16934,0.127 -0.381,0.19049 -0.65617,0.19049 -0.14816,0 -0.29633,-0.0212 -0.42333,-0.0635 -0.14816,-0.0212 -0.254,-0.0635 -0.33866,-0.127 v -0.38099 h 0.0212 c 0.10583,0.0847 0.23283,0.14816 0.38099,0.1905 0.127,0.0423 0.27517,0.0847 0.381,0.0847 0.16933,0 0.29633,-0.0423 0.381,-0.0847 0.0847,-0.0423 0.127,-0.127 0.127,-0.23284 0,-0.0847 -0.0212,-0.14816 -0.0635,-0.19049 -0.0635,-0.0423 -0.14817,-0.0847 -0.27517,-0.10584 -0.0635,-0.0212 -0.127,-0.0423 -0.21166,-0.0423 -0.0847,-0.0212 -0.14817,-0.0423 -0.21167,-0.0635 -0.19049,-0.0423 -0.31749,-0.10583 -0.40216,-0.21166 -0.0847,-0.0847 -0.10583,-0.21167 -0.10583,-0.33867 0,-0.10583 0,-0.16933 0.0423,-0.25399 0.0423,-0.0847 0.0847,-0.14817 0.16933,-0.21167 0.0635,-0.0635 0.14817,-0.10583 0.27517,-0.127 0.10583,-0.0423 0.23283,-0.0635 0.35983,-0.0635 0.127,0 0.25399,0.0212 0.38099,0.0423 0.127,0.0423 0.23284,0.0635 0.3175,0.127 v 0.381 H 81.894 c -0.0847,-0.0847 -0.1905,-0.127 -0.3175,-0.16933 -0.12699,-0.0635 -0.25399,-0.0847 -0.38099,-0.0847 -0.127,0 -0.254,0.0212 -0.33867,0.0847 -0.0847,0.0423 -0.12699,0.127 -0.12699,0.21166 0,0.0847 0.0212,0.16933 0.0847,0.21167 0.0423,0.0423 0.127,0.0635 0.254,0.10583 0.0635,0 0.12699,0.0212 0.21166,0.0423 0.0847,0.0212 0.14817,0.0212 0.21166,0.0423 0.16934,0.0423 0.29634,0.10583 0.381,0.1905 0.0847,0.10583 0.127,0.21166 0.127,0.381 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path967"
-       d="m 84.37051,37.521651 c 0,0.16933 -0.0212,0.33867 -0.0635,0.48683 -0.0423,0.127 -0.127,0.254 -0.21166,0.35983 -0.0847,0.0847 -0.16933,0.14817 -0.29633,0.21167 -0.10584,0.0423 -0.23283,0.0635 -0.35983,0.0635 -0.10584,0 -0.21167,0 -0.29633,-0.0212 -0.0847,-0.0212 -0.16934,-0.0635 -0.27517,-0.127 v 0.88899 h -0.35983 v -2.89981 h 0.35983 v 0.23283 c 0.10583,-0.0847 0.21167,-0.14816 0.3175,-0.1905 0.127,-0.0635 0.254,-0.0847 0.381,-0.0847 0.25399,0 0.46566,0.0847 0.59266,0.27517 0.14816,0.1905 0.21166,0.46566 0.21166,0.80433 z m -0.35983,0.0212 c 0,-0.254 -0.0423,-0.44449 -0.12699,-0.57149 -0.0847,-0.127 -0.23284,-0.1905 -0.40217,-0.1905 -0.10583,0 -0.21166,0.0212 -0.31749,0.0635 -0.10584,0.0423 -0.1905,0.10583 -0.29634,0.16933 v 1.20649 c 0.10584,0.0423 0.1905,0.0635 0.27517,0.0847 0.0635,0.0212 0.14816,0.0212 0.23283,0.0212 0.21167,0 0.35983,-0.0635 0.46566,-0.1905 0.10584,-0.127 0.16933,-0.33866 0.16933,-0.59266 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path969"
-       d="m 86.69883,37.585151 h -1.54515 c 0,0.127 0.0212,0.254 0.0635,0.33867 0.0212,0.10583 0.0847,0.1905 0.14816,0.25399 0.0635,0.0423 0.14817,0.10584 0.23283,0.127 0.0847,0.0212 0.1905,0.0423 0.29633,0.0423 0.14817,0 0.29633,-0.0212 0.4445,-0.0847 0.14817,-0.0635 0.254,-0.10583 0.3175,-0.16933 v 0 0.381 c -0.10583,0.0635 -0.23283,0.10583 -0.35983,0.127 -0.127,0.0423 -0.254,0.0635 -0.40217,0.0635 -0.33866,0 -0.61382,-0.10583 -0.80432,-0.29633 -0.21167,-0.1905 -0.29633,-0.4445 -0.29633,-0.80433 0,-0.33866 0.0847,-0.61383 0.27516,-0.82549 0.1905,-0.1905 0.4445,-0.29634 0.74083,-0.29634 0.29633,0 0.50799,0.0847 0.65616,0.254 0.16933,0.14817 0.23283,0.40217 0.23283,0.6985 z m -0.33866,-0.27516 c 0,-0.16933 -0.0423,-0.3175 -0.14817,-0.42333 -0.0847,-0.10583 -0.23283,-0.14817 -0.42333,-0.14817 -0.1905,0 -0.33866,0.0423 -0.44449,0.16933 -0.127,0.10584 -0.1905,0.23284 -0.1905,0.40217 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path971"
-       d="m 88.81548,38.474151 c -0.127,0.0635 -0.23283,0.10583 -0.33866,0.127 -0.10583,0.0423 -0.23283,0.0635 -0.33867,0.0635 -0.14816,0 -0.29633,-0.0212 -0.42333,-0.0635 -0.127,-0.0635 -0.23283,-0.127 -0.33866,-0.21167 -0.0847,-0.0847 -0.14817,-0.21167 -0.21166,-0.33866 -0.0423,-0.14817 -0.0635,-0.3175 -0.0635,-0.48683 0,-0.35983 0.0847,-0.635 0.27516,-0.8255 0.1905,-0.1905 0.4445,-0.29633 0.76199,-0.29633 0.127,0 0.23284,0.0212 0.35984,0.0635 0.10583,0.0212 0.21166,0.0635 0.31749,0.10583 v 0.40217 h -0.0212 c -0.10583,-0.0847 -0.21166,-0.14817 -0.33866,-0.1905 -0.10584,-0.0423 -0.23283,-0.0635 -0.33867,-0.0635 -0.1905,0 -0.35983,0.0635 -0.48683,0.1905 -0.10583,0.14816 -0.16933,0.33866 -0.16933,0.61383 0,0.25399 0.0635,0.44449 0.16933,0.57149 0.127,0.14817 0.27517,0.21167 0.48683,0.21167 0.0635,0 0.14817,0 0.21167,-0.0212 0.0847,-0.0212 0.14816,-0.0423 0.21166,-0.0847 0.0423,-0.0212 0.10584,-0.0423 0.14817,-0.0847 0.0423,-0.0212 0.0847,-0.0423 0.10583,-0.0635 h 0.0212 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path973"
-       d="m 90.36064,38.601151 c -0.0635,0 -0.127,0.0212 -0.21167,0.0423 -0.0847,0 -0.14816,0 -0.21166,0 -0.21167,0 -0.381,-0.0423 -0.48683,-0.16934 -0.10584,-0.10583 -0.16933,-0.29633 -0.16933,-0.55033 v -1.12182 h -0.23284 v -0.3175 h 0.23284 v -0.59266 h 0.35983 v 0.59266 h 0.71966 v 0.3175 h -0.71966 v 0.95249 c 0,0.10584 0,0.21167 0,0.27517 0,0.0423 0.0212,0.10583 0.0635,0.16933 0.0212,0.0423 0.0635,0.0847 0.10583,0.10583 0.0423,0.0212 0.127,0.0423 0.23283,0.0423 0.0423,0 0.10583,-0.0212 0.16933,-0.0212 0.0635,-0.0212 0.10584,-0.0423 0.14817,-0.0635 v 0 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path975"
-       d="m 92.60429,37.563991 c 0,0.33866 -0.0847,0.61382 -0.254,0.80432 -0.1905,0.21167 -0.42333,0.29633 -0.71966,0.29633 -0.29633,0 -0.52917,-0.0847 -0.71966,-0.29633 -0.16934,-0.1905 -0.254,-0.46566 -0.254,-0.80432 0,-0.35983 0.0847,-0.635 0.254,-0.8255 0.19049,-0.21166 0.42333,-0.29633 0.71966,-0.29633 0.29633,0 0.52916,0.0847 0.71966,0.29633 0.16933,0.1905 0.254,0.46567 0.254,0.8255 z m -0.35983,0 c 0,-0.27517 -0.0635,-0.48683 -0.16933,-0.61383 -0.10584,-0.14817 -0.254,-0.21167 -0.4445,-0.21167 -0.1905,0 -0.33867,0.0635 -0.4445,0.21167 -0.10583,0.127 -0.16933,0.33866 -0.16933,0.61383 0,0.25399 0.0635,0.46566 0.16933,0.59266 0.10583,0.14816 0.254,0.21166 0.4445,0.21166 0.1905,0 0.33866,-0.0635 0.4445,-0.21166 0.10583,-0.127 0.16933,-0.33867 0.16933,-0.59266 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path977"
-       d="m 94.48811,36.886661 h -0.0212 c -0.0635,-0.0212 -0.10584,-0.0212 -0.16933,-0.0212 -0.0423,-0.0212 -0.10584,-0.0212 -0.16934,-0.0212 -0.10583,0 -0.21166,0.0212 -0.31749,0.0847 -0.10584,0.0423 -0.1905,0.10583 -0.29633,0.16933 v 1.50282 h -0.35984 v -2.11665 h 0.35984 v 0.3175 c 0.14816,-0.10583 0.27516,-0.1905 0.38099,-0.23283 0.10583,-0.0423 0.21167,-0.0847 0.3175,-0.0847 0.0635,0 0.10583,0.0212 0.14816,0.0212 0.0212,0 0.0635,0 0.127,0.0212 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path979"
-       d="m 114.0883,37.775651 c 0,0.10583 -0.0212,0.23283 -0.0635,0.33867 -0.0635,0.10583 -0.127,0.19049 -0.21167,0.27516 -0.10583,0.0635 -0.23283,0.127 -0.35983,0.16933 -0.14817,0.0635 -0.29633,0.0847 -0.48683,0.0847 -0.21166,0 -0.381,-0.0212 -0.55033,-0.0635 -0.16933,-0.0423 -0.3175,-0.0847 -0.48683,-0.16933 v -0.46566 h 0.0212 c 0.14817,0.10583 0.29633,0.21166 0.48683,0.27516 0.1905,0.0635 0.35983,0.0847 0.52916,0.0847 0.23284,0 0.42333,-0.0423 0.55033,-0.127 0.127,-0.0847 0.1905,-0.1905 0.1905,-0.33866 0,-0.127 -0.0423,-0.23283 -0.0847,-0.27517 -0.0635,-0.0635 -0.16933,-0.10583 -0.29633,-0.14816 -0.0847,-0.0212 -0.1905,-0.0423 -0.29633,-0.0635 -0.10583,-0.0212 -0.23283,-0.0423 -0.35983,-0.0635 -0.254,-0.0423 -0.42333,-0.14817 -0.55033,-0.27517 -0.127,-0.127 -0.1905,-0.29633 -0.1905,-0.48683 0,-0.23283 0.10583,-0.44449 0.3175,-0.59266 0.1905,-0.14816 0.4445,-0.21166 0.74083,-0.21166 0.21166,0 0.38099,0 0.55033,0.0423 0.16933,0.0423 0.31749,0.0847 0.44449,0.14816 v 0.4445 h -0.0212 c -0.10583,-0.0847 -0.254,-0.16933 -0.42333,-0.23283 -0.1905,-0.0635 -0.35983,-0.0847 -0.55033,-0.0847 -0.19049,0 -0.35983,0.0423 -0.48683,0.127 -0.10583,0.0847 -0.16933,0.1905 -0.16933,0.3175 0,0.12699 0.0212,0.21166 0.0847,0.27516 0.0635,0.0635 0.16933,0.127 0.3175,0.14817 0.0847,0.0212 0.1905,0.0423 0.35983,0.0635 0.14816,0.0423 0.27516,0.0635 0.35983,0.0847 0.21166,0.0635 0.381,0.14816 0.48683,0.25399 0.10583,0.10584 0.14817,0.27517 0.14817,0.46567 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path981"
-       d="m 116.43778,38.579981 h -0.35983 v -1.20649 c 0,-0.0847 0,-0.1905 -0.0212,-0.27517 0,-0.0847 -0.0212,-0.14816 -0.0635,-0.1905 -0.0212,-0.0635 -0.0635,-0.0847 -0.127,-0.12699 -0.0635,-0.0212 -0.127,-0.0212 -0.23283,-0.0212 -0.0847,0 -0.1905,0.0212 -0.29633,0.0635 -0.10584,0.0423 -0.21167,0.10583 -0.3175,0.19049 v 1.56633 h -0.35983 v -2.94215 h 0.35983 v 1.05833 c 0.127,-0.0847 0.23283,-0.14817 0.35983,-0.21167 0.10583,-0.0423 0.23283,-0.0635 0.35983,-0.0635 0.23284,0 0.40217,0.0635 0.52917,0.1905 0.10583,0.14817 0.16933,0.33867 0.16933,0.59266 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path983"
-       d="m 118.76609,38.579981 h -0.35983 v -0.21167 c -0.0212,0.0212 -0.0635,0.0423 -0.127,0.0847 -0.0423,0.0423 -0.10583,0.0635 -0.14816,0.0847 -0.0635,0.0423 -0.127,0.0635 -0.21167,0.0847 -0.0635,0.0212 -0.16933,0.0212 -0.25399,0.0212 -0.1905,0 -0.35984,-0.0635 -0.48684,-0.19049 -0.14816,-0.127 -0.21166,-0.27517 -0.21166,-0.48683 0,-0.14817 0.0423,-0.27517 0.10583,-0.381 0.0635,-0.10583 0.16933,-0.16933 0.29633,-0.23283 0.127,-0.0635 0.27517,-0.10584 0.46567,-0.127 0.16933,-0.0212 0.381,-0.0212 0.57149,-0.0423 v -0.0423 c 0,-0.0847 0,-0.14817 -0.0423,-0.21167 -0.0212,-0.0423 -0.0635,-0.0847 -0.10583,-0.127 -0.0635,-0.0212 -0.127,-0.0423 -0.1905,-0.0635 -0.0635,0 -0.14816,0 -0.21166,0 -0.10583,0 -0.21167,0 -0.3175,0.0423 -0.127,0.0212 -0.23283,0.0423 -0.35983,0.10584 h -0.0212 v -0.381 c 0.0635,0 0.16933,-0.0212 0.29633,-0.0635 0.14816,-0.0212 0.27516,-0.0212 0.40216,-0.0212 0.14817,0 0.27517,0 0.381,0.0423 0.10583,0.0212 0.21166,0.0635 0.29633,0.127 0.0635,0.0423 0.127,0.127 0.16933,0.21166 0.0423,0.10584 0.0635,0.21167 0.0635,0.33867 z m -0.35983,-0.508 v -0.59266 c -0.10583,0 -0.23283,0.0212 -0.38099,0.0212 -0.14817,0.0212 -0.254,0.0423 -0.33867,0.0635 -0.10583,0.0212 -0.1905,0.0635 -0.254,0.127 -0.0635,0.0635 -0.0847,0.14816 -0.0847,0.254 0,0.127 0.0212,0.21166 0.10584,0.27516 0.0635,0.0635 0.1905,0.0847 0.33866,0.0847 0.127,0 0.23283,-0.0212 0.33867,-0.0635 0.10583,-0.0423 0.19049,-0.10583 0.27516,-0.16933 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path985"
-       d="m 121.32724,37.500491 c 0,0.16933 -0.0212,0.33866 -0.0847,0.46566 -0.0423,0.14817 -0.10583,0.27516 -0.21166,0.35983 -0.0847,0.10583 -0.16933,0.16933 -0.29633,0.23283 -0.10584,0.0423 -0.21167,0.0635 -0.33867,0.0635 -0.127,0 -0.21166,0 -0.3175,-0.0212 -0.0847,-0.0423 -0.16933,-0.0635 -0.25399,-0.127 v 0.889 h -0.35983 v -2.89981 h 0.35983 v 0.23283 c 0.0847,-0.0847 0.1905,-0.14817 0.31749,-0.21167 0.10584,-0.0423 0.23284,-0.0635 0.381,-0.0635 0.254,0 0.4445,0.0847 0.59266,0.27517 0.127,0.1905 0.21167,0.46566 0.21167,0.80433 z m -0.381,0.0212 c 0,-0.27517 -0.0423,-0.46567 -0.127,-0.59267 -0.0847,-0.10583 -0.21166,-0.16933 -0.40216,-0.16933 -0.10583,0 -0.1905,0.0212 -0.29633,0.0635 -0.10583,0.0423 -0.21166,0.0847 -0.29633,0.16933 v 1.2065 c 0.0847,0.0423 0.16933,0.0635 0.254,0.0847 0.0635,0.0212 0.14816,0.0212 0.254,0.0212 0.19049,0 0.33866,-0.0635 0.46566,-0.1905 0.10583,-0.14817 0.14816,-0.33867 0.14816,-0.59267 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path987"
-       d="m 123.65556,37.563991 h -1.56632 c 0,0.12699 0.0212,0.25399 0.0635,0.33866 0.0423,0.10583 0.0847,0.16933 0.14816,0.23283 0.0847,0.0635 0.14817,0.10583 0.23283,0.14817 0.10583,0.0212 0.1905,0.0423 0.3175,0.0423 0.127,0 0.27517,-0.0212 0.42333,-0.0847 0.14817,-0.0635 0.254,-0.127 0.3175,-0.16933 h 0.0212 v 0.38099 c -0.127,0.0635 -0.254,0.10583 -0.381,0.127 -0.127,0.0423 -0.254,0.0635 -0.381,0.0635 -0.35983,0 -0.635,-0.10583 -0.82549,-0.29633 -0.1905,-0.1905 -0.29633,-0.46566 -0.29633,-0.80433 0,-0.33866 0.0847,-0.61383 0.27516,-0.82549 0.1905,-0.21167 0.4445,-0.29633 0.76199,-0.29633 0.27517,0 0.48684,0.0635 0.65617,0.23283 0.14817,0.16933 0.23283,0.40216 0.23283,0.71966 z m -0.35983,-0.27517 c 0,-0.1905 -0.0423,-0.33866 -0.127,-0.42333 -0.10583,-0.10583 -0.23283,-0.16933 -0.42333,-0.16933 -0.1905,0 -0.35983,0.0635 -0.46567,0.16933 -0.10583,0.127 -0.16933,0.254 -0.19049,0.42333 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path989"
-       d="m 126.44954,35.764831 -1.03716,2.81515 h -0.50799 l -1.016,-2.81515 h 0.40217 l 0.88899,2.47648 0.88899,-2.47648 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path991"
-       d="m 127.2327,36.124661 h -0.40216 v -0.38099 h 0.40216 z m -0.0212,2.45532 h -0.35983 v -2.11665 h 0.35983 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path993"
-       d="m 129.68802,37.563991 h -1.56632 c 0,0.12699 0.0212,0.25399 0.0635,0.33866 0.0423,0.10583 0.0847,0.16933 0.14816,0.23283 0.0847,0.0635 0.14817,0.10583 0.23283,0.14817 0.10583,0.0212 0.1905,0.0423 0.3175,0.0423 0.127,0 0.27516,-0.0212 0.42333,-0.0847 0.14816,-0.0635 0.254,-0.127 0.3175,-0.16933 h 0.0212 v 0.38099 c -0.127,0.0635 -0.254,0.10583 -0.38099,0.127 -0.127,0.0423 -0.254,0.0635 -0.381,0.0635 -0.35983,0 -0.635,-0.10583 -0.82549,-0.29633 -0.1905,-0.1905 -0.29634,-0.46566 -0.29634,-0.80433 0,-0.33866 0.0847,-0.61383 0.27517,-0.82549 0.1905,-0.21167 0.4445,-0.29633 0.76199,-0.29633 0.27517,0 0.48683,0.0635 0.65616,0.23283 0.14817,0.16933 0.23284,0.40216 0.23284,0.71966 z m -0.35984,-0.27517 c 0,-0.1905 -0.0423,-0.33866 -0.12699,-0.42333 -0.10584,-0.10583 -0.23284,-0.16933 -0.42333,-0.16933 -0.1905,0 -0.35983,0.0635 -0.46567,0.16933 -0.10583,0.127 -0.16933,0.254 -0.19049,0.42333 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path995"
-       d="m 132.88416,36.463331 -0.55033,2.11665 h -0.33866 l -0.52917,-1.62982 -0.55033,1.62982 h -0.31749 l -0.5715,-2.11665 h 0.381 l 0.38099,1.65099 0.52917,-1.65099 h 0.29633 l 0.55033,1.65099 0.35983,-1.65099 z"
-       style="fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.26458332"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path997"
-       d="M 42.608991,62.752131 H 181.82113 V 118.33539 H 42.608991 Z"
-       style="fill:none;stroke:#ff9933;stroke-width:0.52916276px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path999"
-       d="M 35.666376,55.280361 H 174.89968 V 110.86361 H 35.666376 Z"
-       style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:#33cccc;stroke-width:0.52916276px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       inkscape:connector-curvature="0" />
-    <path
-       id="path1001"
-       d="M 28.744927,47.808581 H 167.97823 V 103.39183 H 28.744927 Z"
-       style="fill:#9bbb59;fill-opacity:1;fill-rule:nonzero;stroke:#77933c;stroke-width:0.52916667;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
-       inkscape:connector-curvature="0" />
-  </g>
-</svg>

dox/user_guides/inspector/images/vinspector_elements.svg

@@ -1,200 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="165.36458mm"
-   height="99.483337mm"
-   viewBox="0 0 165.36458 99.483337"
-   version="1.1"
-   id="svg3064"
-   inkscape:version="0.92.2 (5c3e80d, 2017-08-06)"
-   sodipodi:docname="vinspector_elements.svg">
-  <defs
-     id="defs3058" />
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="0.98994949"
-     inkscape:cx="261.33464"
-     inkscape:cy="225.25011"
-     inkscape:document-units="mm"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:showpageshadow="false"
-     inkscape:window-width="1277"
-     inkscape:window-height="875"
-     inkscape:window-x="314"
-     inkscape:window-y="16"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata3061">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(201.36682,-127.81786)">
-    <rect
-       style="opacity:1;fill:#000000;fill-opacity:0;fill-rule:evenodd;stroke:#33cccc;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4147-0"
-       width="164.83542"
-       height="98.95417"
-       x="-201.10223"
-       y="128.08244"
-       inkscape:export-filename="D:\OCCT\master_CR27398_doc\dox\user_guides\qt_browsers\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#93cddd;fill-opacity:1;fill-rule:evenodd;stroke:#33cccc;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-8"
-       width="155.951"
-       height="20.214758"
-       x="-197.10306"
-       y="132.31981"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#93cddd;fill-opacity:1;fill-rule:evenodd;stroke:#33cccc;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4159-9"
-       width="155.55411"
-       height="39.471096"
-       x="-197.06837"
-       y="157.2328"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.56444448;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-6"
-       width="109.47361"
-       height="11.118413"
-       x="-155.47618"
-       y="136.86798"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620289;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-6"
-       width="30.417513"
-       height="11.316654"
-       x="-192.77927"
-       y="136.76886"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-184.57181"
-       y="143.51102"
-       id="text5675-9"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-2"
-         x="-184.57181"
-         y="143.51102"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Update</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-118.07398"
-       y="143.87196"
-       id="text5683-7"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-7"
-         x="-118.07398"
-         y="143.87196"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Selection controls</tspan></text>
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.56444448;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-8-4"
-       width="79.254326"
-       height="23.947351"
-       x="-158.91849"
-       y="164.99469"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666654px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-143.42757"
-       y="176.27301"
-       id="text5683-5-4"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-59"
-         x="-143.42757"
-         y="176.27301"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">Presentations tree view</tspan></text>
-    <rect
-       style="opacity:1;fill:#93cddd;fill-opacity:1;fill-rule:evenodd;stroke:#33cccc;stroke-width:0.52916664;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-8-7"
-       width="155.951"
-       height="20.214758"
-       x="-196.94507"
-       y="202.23282"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.36620289;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-6-6"
-       width="147.01831"
-       height="11.316654"
-       x="-192.62131"
-       y="206.68187"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666654px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222221px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="-132.50854"
-       y="210.87439"
-       id="text5683-5-4-1"
-       transform="scale(0.98830373,1.0118347)"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\vinspector.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5685-3-59-8"
-         x="-132.50854"
-         y="210.87439"
-         style="font-size:3.83516741px;line-height:1.25;stroke-width:0.28222221px">History view</tspan></text>
-  </g>
-</svg>

dox/user_guides/inspector/inspector.md

@@ -1,578 +0,0 @@
-Inspector  {#occt_user_guides__inspector}
-===============================
-
-@tableofcontents
- 
-@section occt_inspector_1 Introduction
-
-This manual explains how to use Inspector.
-
-@subsection occt_inspector_1_1 Overview
-Inspector is a Qt-based library that provides functionality to interactively inspect low-level content of the OCAF data model, OCCT viewer and Modelisation Data.
-This component is aimed to assist the developers of OCCT-based applications to debug the problematic situations that occur in their applications.
-
-Inspector has a plugin-oriented architecture. The current release contains the following plugins:
-
-| Plugin | OCCT component | Root class of OCCT investigated component |
-| :----- | :----- | :----- |
-| @ref occt_inspector_2_2 "DFBrowser"| OCAF | TDocStd_Application |
-| @ref occt_inspector_2_3 "VInspector"| Visualization | AIS_InteractiveContext |
-| @ref occt_inspector_2_4 "ShapeView"| Modelisation Data | TopoDS_Shape |
-
-
-Each plugin implements logic of a corresponding OCCT component.
-
-Each of the listed plugins is embeded in the common framework.
-The user is able to manage which plugins should be loaded by Inspector.
-Also he can extend number of plugins by implementing a new plugin.
-
-
-@subsection occt_inspector_1_3 Getting started
-
-There are two launch modes:
-1. Launch **TInspectorEXE** executable sample. For more details see @ref occt_inspector_6 "TInspectorEXE" section;
-2. Launch DRAW, load plugin INSPECTOR, and use **tinspector** command.
-   For more details see @ref occt_inspector_7 "Launch in DRAW Test Harness" section.
-
-
-Note. If you have no Inspector library in your build directory, please make sure that OCCT is compiled with *BUILD_Inspector* 
-option ON. For more details see @ref occt_inspector_4 "Build procedure".
-
-
-@section occt_inspector_2 Inspector
-
-@subsection occt_inspector_2_1 Overview
-
-Inspector consists of the following components:
-  * <b>buttons</b> to activate the corresponding plugin;
-  * <b>view area</b> to visualize the plugin content.
-
-@figure{tinspector_elements.svg,"Plugins placement in Inspector",360}
-
-@subsection occt_inspector_2_2 DFBrowser Plugin
-
-@subsubsection occt_inspector_2_2_1 Overview
-
-@figure{dfbrowser.png, "DFBrowser"}
-
-This plugin visualizes content of TDocStd_Application in a tree view. It shows documents of the application,
-hierarchy of TDF_Labels, content of TDF_Attributes and interconnection between attributes (e.g. references).
-Additionally it has 3D view to visualize TopoDS_Shape elements stored in the document.
-
-@subsubsection occt_inspector_2_2_2 Elements
-
-@figure{dfbrowser_elements.svg, "DFBrowser Elements",360}
-
-<b>OCAF tree view</b>
-
-Each OCAF element has own tree view item:
-
-| Type | Tree item | Text | Description |
-| :----- | :----- | :----- | :----- |
-| TDocStd_Application | Application | TDocStd_Application | It is the root of tree view. Children are documents.|
-| TDocStd_Document | Document | entry : name | It is a child of Application item. Children are Labels and Attributes items.<br> Text view is an entry of the root label and the value of TDataStd_Name attribute for the label if it exists. |
-| TDF_Label | Label | entry : name | It is a child of a Document or another Label item. Children and text view are the same as for Document item. |
-| TDF_Attribute | Attribute | attribute type [additional information] | It is a child of a Label. It has no children. <br> Text view is the attribute type (DynamicType()->Name() of TDF_Attribute) and additional information (a combination of attribute values) |
-
-
-Additional information of TDF_Attributes:
-
-| Type | Text |
-| :----- | :----- |
-| TDocStd_Owner | [storage format] |
-| TDataStd_AsciiString,<br> TDataStd_Name,<br> TDataStd_Real,<br> @ref occt_attribute_simple_types "other Simple types" | [value] |
-| TDataStd_BooleanList,<br> TDataStd_ExtStringList,<br> @ref occt_attribute_list_types "other List types" | [value_1 ... value_n] |
-| TDataStd_BooleanArray,<br> TDataStd_ByteArray,<br> @ref occt_attribute_array_types "other Array types" | [value_1 ... value_n] |
-| TDataStd_TreeNode | [tree node ID  ==> Father()->Label()] (if it has father) or <br> [tree node ID <== First()->Label()] (if it has NO father)|
-| TDataStd_TreeNode(XDE) | [@ref occt_attribute_xde_tree_node_id "XDE tree node ID"  ==> Father()->Label()] (if it has father), <br> [@ref occt_attribute_xde_tree_node_id "XDE tree Node ID" <== label_1, ..., label_n] (if it has NO father)|
-| TNaming_NamedShape | [shape type : evolution] |
-| TNaming_UsedShapes | [map extent] |
-
-
-Custom color of items:
-
-| OCAF element Type | Color |
-| :----- | :----- |
-| TDF_Label | <b>dark green</b>, if the label has TDataStd_Name attribute, <br><b>light grey</b> if the label is empty (has no attributes on all levels of hierarchy),<br> <b>black</b> otherwise |
-| TNaming_NamedShape | <b>dark gray</b> for TopAbs_FORWARD orientation of TopoDS_Shape, <br> <b>gray</b> for TopAbs_REVERSED orientation of TopoDS_Shape, <br> <b>black</b> for other orientation |
-
-
-Context popup menu:
-| Action | Functionality |
-| :----- | :----- |
-| Expand | Expands the next two levels under the selected item |
-| Expand All | Expands the whole tree of the selected item |
-| Collapse All | Collapses the whole tree of the selected item |
-
-
-<b>Property Panel</b>
-
-Property panel is used to display content of Label or Attribute tree view items.
-This control is used for content of Label or Attribute tree view items or Search result view.
-Information is usually shown in one or several tables.
-
-TDF_Attribute has the following content in Property Panel:
-
-<table>
-<tr><th>Type</th><th>Description</th><th>Content</th></tr>
-<tr><td>TDF_Label</td>
-    <td> a table of [entry or attribute name, value]</td>
-    <td>@figure{property_panel_label.png, "",140}</td></tr>
-<tr><td>TDocStd_Owner,<br> @ref occt_attribute_simple_types "Simple types", <br> @ref occt_attribute_list_types "List types"</td>
-    <td>a table of [method name, value]</td>
-    <td>@figure{property_panel_simple_type.png, "",140}</td></tr>
-<tr><td>TDataStd_BooleanArray,<br> TDataStd_ByteArray,<br> @ref occt_attribute_array_types "other Array types"</td>
-    <td>2 controls: <br>  * a table of [array bound, value], <br>  * table of [method name, value]</td>
-    <td>@figure{property_panel_array.png, "",140}</td></tr>
-<tr><td>TDataStd_TreeNode</td>
-    <td>2 controls: <br>  * a table of [Tree ID, value] (visible only if Tree ID() != ID()), <br>  * a tree view of tree nodes starting from Root() of the tree node. The current tree node has <b>dark blue</b> text.</td>
-    <td>@figure{property_panel_tree_node.png, "",140} </td></tr>
-<tr><td>TDataStd_NamedData</td>
-    <td>tab bar of attribute elements, each tab has a table of [name, value]</td>
-    <td>@figure{property_panel_named_data.png, "",140}</td></tr>
-<tr><td>TNaming_UsedShapes</td>
-    <td>a table of all  the shapes handled by the framework</td>
-    <td>@figure{property_panel_tnaming_used_shapes.png, "",140}</td></tr>
-<tr><td>TNaming_NamedShape</td>
-    <td>2 controls: <br>  * a table of [method name, value] including CurrentShape/OriginalShape methods result of TNaming_Tools, <br>  * an evolution table. <br> Tables contain buttons for @ref occt_shape_export "TopoDS_Shape export".</td>
-    <td>@figure{property_panel_tnaming_named_shape.png, "",140}</td></tr>
-<tr><td>TNaming_Naming</td>
-    <td>2 controls: <br>  * a table of TNaming_Name vlaues,<br>  * a table of [method name, value]</td>
-    <td>@figure{property_panel_tnaming_naming.png, "",140}</td></tr>
-</table>
-
-
-<b>Dump view</b>
-
-@figure{dump_attribute.png, "Dump of TDF_Attribute"}
-
-Dump view shows result of <b>TDF_Attribute::Dump()</b> or <b>TDF_Label::Dump()</b> of selected tree view item.
-
-<b>3D view</b>
-
-3D View visualizes TopoDS_Shape elements of OCAF attribute via AIS facilities.
-
-DFBrowser creates two kinds presentations depending on the selection place:
-
-<table>
-<tr><th>Kind</th><th>Source object</th><th>Visualization propeties</th><th>View</th></tr>
-<tr><td>Main presentation</td>
-    <td>Tree view item:<br> TPrsStd_AISPresentation,<br> TNaming_NamedShape,<br> TNaming_Naming</td>
-    <td>Color: a default color for shape type of the current TopoDS_Shape</td>
-    <td>@figure{display_main_presentation.png, "",100}</td></tr>
-<tr><td>Additional presentation</td>
-    <td>References in Property panel</td>
-    <td>Color: white</td>
-    <td>@figure{display_additional_presentation.png, "",100}</td></tr>
-</table>
-
-
-
-<b>Tree Navigation</b>
-
-Tree Navigation shows a path to the item selected in the tree view.
-The path is a sequence of label entries and attribute type name.
-Each element in the path is selectable - the user can click on it to select the corresponding tree view item.
-
-Navigation control has buttons to go to the previous and the next selected tree view items.
-
-
-<b>Update Button</b>
-
-Update button synchronizes content of tree view to the current content of OCAF document that could be modified outside.
-
-<b>Search</b>
-
-The user can search OCAF element by typing:
-  * TDF_Label entry,
-  * TDF_Attribute name,
-  * TDataStd_Name and TDataStd_Comment attributes value.
-
-@figure{search.png,"Search"}
-
-As soon as the user confirms the typed criteria, the Property panel is filled by all satisfied values.
-The user can click a value to hightligt the corresponding tree view item. By double click the item will be selected.
-
-
-@subsubsection occt_inspector_2_2_3 Elements cooperation
-
-<b>Tree item selection</b>
-
-Selection of tree view item updates content of the following controls:
-  * Navigation line
-  * Property Panel
-  * 3D View (if it is possible to create an interactive presentation)
-  * Dump View
-
-@figure{dfbrowser_selection_in_tree_view.svg,"",360}
-
-<b>Property Panel item selection </b>
-
-If property panel shows content of TDF_Label:
-  * selection of the table row hightlights the corresponding item in tree view,
-  * double click on the table row selects this item in tree view.
-
-If property panel shows content of TDF_Attribute that has reference to another attribute, selection of this reference:
-  * highlights the referenced item in TreeView,
-  * displays additional presentation in 3D view if it can be created.
-
-@figure{property_panel_item_selection.svg,"",360}
-
-Attributes having references:
-
-| Type | Reference | Additional presentation
-| :----- | :----- | :----- |
-| TDF_Reference | TDF_Label | |
-| TDataStd_ReferenceArray, <br> TDataStd_ReferenceList, <br> TNaming_Naming | one or several TDF_Label in a container | |
-| TDataStd_TreeNode | TDF_Label | |
-| TNaming_NamedShape | TDF_Label in Evolution table | selected TopoDS_Shapes in property panel tables |
-| TNaming_UsedShapes | one or several TNaming_NamedShape | TopoDS_Shapes of selected TNaming_NamedShape |
-
-
-@subsubsection occt_shape_export TopoDS_Shape export
-
-Property panel of TNaming_NamedShape attribute has controls to export TopoDS_Shape to:
-  * BREP. The save file dialog is started to enter the result file name,
-  * @ref occt_inspector_2_4 "ShapeView" plugin. Dialog about exporting element to ShapeView is shown with a possibility to activate this plugin immediatelly.
-
-
-@subsection occt_inspector_2_3 VInspector Plugin
-
-@subsubsection occt_inspector_2_3_1 Overview
-
-@figure{vinspector.png, "VInspector"}
-
-It visualizes interactive objects displayed in AIS_InteractiveContext in a tree view with columputed selection
-components for each presentation. It shows the selected elements in the context and allows to select these elements.
-
-@subsubsection occt_inspector_2_3_2 Elements
-
-@figure{vinspector_elements.svg,"VInspector Elements",360}
-
-<b>Presentations tree view</b>
-
-It shows presentations and selection computed of them. Also, the view has columns with information about state of visualization elements.
-
-VInspector tree items.
-
-| Type | Description |
-| :----- | :----- |
-| AIS_InteractiveContext | It is the root of tree view. Children are interactive objects obtained by *DisplayedObjects* and *ErasedObjects* methods.|
-| AIS_InteractiveObject | It is a child of AIS_InteractiveContext item. Children are SelectMgr_Selection obtained by iteration on *CurrentSelection*  |
-| SelectMgr_Selection | It is a child of AIS_InteractiveObject. Children are SelectMgr_SensitiveEntity obtaining by iteration on *Sensitive* |
-| SelectMgr_SensitiveEntity | It is a child of SelectMgr_Selection. Children are SelectMgr_SensitiveEntity obtaining by iteration on *OwnerId* |
-| SelectBasics_EntityOwner | It is a child SelectMgr_SensitiveEntity. It has no children. |
-
-
-Custom color of tree view items:
-
-| OCAF element Type | Column | What | Color |
-| :----- | :----- | :----- | :----- |
-| AIS_InteractiveObject | 0 | Text | <b>dark gray</b>, it is in *ErasedObjects* list of AIS_InteractiveContext,<br> <b>black</b> otherwise |
-| AIS_InteractiveObject, <br> SelectMgr_SensitiveEntity, <br> SelectBasics_EntityOwner| 1 | Background | <b>dark blue</b>, if there is a selected owner under the item, <br> <b>black</b> otherwise |
-| SelectMgr_Selection,<br> SelectMgr_SensitiveEntity,<br> SelectBasics_EntityOwner| all | Text | <b>dark gray</b>, if *SelectionState* of SelectMgr_Selection is not *SelectMgr_SOS_Activated*,<br> <b>black</b> otherwise |
-
-
-Context popup menu in tree view:
-| Action | Item | Functionality |
-| :----- | :----- | :----- |
-| Export to ShapeView | AIS_InteractiveObject | Exports TopoDS_Shape of AIS_Interactive presentation to ShapeView plugin. <br> It should be AIS_Shape presentation and ShapeView plugin should be registered in Inspector<br> Dialog about exporting element to ShapeView is shown with a possibility to activate this plugin immediatelly. |
-| Show | AIS_InteractiveObject | *Display* presentation in AIS_InteractiveContext |
-| Hide | AIS_InteractiveObject | *Erase* presentation from AIS_InteractiveContext |
-
-<b>Update</b>
-
-It synchronizes content of the plugin to the current state of AIS_InteractiveContext.
-It updates the presence of items and the current selection for the items.
-
-<b>Selection controls</b>
-
-Selection controls switch on/off the posibility to set selection in the context from VInspector plugin.
-
-| Action | Tree view item | Functionality |
-| :----- | :----- | :----- |
-| Select Presentations | AIS_InteractiveObject | Calls *AddOrRemoveSelected* of interactive object for the selected item |
-| Select Owners | SelectMgr_EntityOwner or <br> SelectMgr_SensitiveEntity | Calls *AddOrRemoveSelected* of SelectMgr_EntityOwner for the selected item |
-
-Please note, that the initial selection in context will be cleared.
-If the button is toggled, the button selection is active. Only one button may be toggled at the moment.
-
-
-<b>History view</b>
-
-At present the History view is under implementation and may be used only in a custom application where Inspector is loaded.
-
-To fill this view, VInspectorAPI_CallBack should be redefined in the application and send signals about some actions applyed to context.
-After, the call back should be given as parameter in the plugin.
-If done, new items will be created in the history view for each action.
-
-@subsubsection occt_inspector_2_3_3 Elements cooperation
-
-Vinspector markes current selected presentations in AIS_InteractiveContext with blue background in tree items. Use "Update" button to synchronize VInspector selected items state to the context.
-
-It is also possible to perform selection in context using "Selection controls" VInspector. However, it should be performed carefully as
-it clears the current selection in AIS_InteractiveContext.
-
-Selection change:
-| From | To | Action | Result |
-| :----- | :----- | :----- | :----- |
-| AIS_InteractiveContext | VInspector | perform selection in AIS_InteractiveContext | Click "Update" button in VInspector and check "Selection" column: <br> AIS_InteractiveContext item has anount of selected objects,<br> some of AIS_InteractiveObject have filled value if it selection happens for this presentation or entity owner of it |
-| VInspector | AIS_InteractiveContext | activate one of Selection controls and select one or several elements in tree view | The objects become selected in AIS_InteractiveContext |
-
-@subsection occt_inspector_2_4 ShapeView Plugin
-
-@subsubsection occt_inspector_2_4_1 Overview
-
-@figure{shapeview.png, "ShapeView"}
-
-This plugin visualizes content of TopoDS_Shape in a tree view.
-
-@subsubsection occt_inspector_2_4_2 Elements
-
-@figure{shapeview_elements.svg,"ShapeView Elements",360}
-
-<b>TopoDS_Shape View</b>
-
-Elements of the view are TopoDS_Shape objects.
-This shape is exploded into sub-shapes using TopoDS_Iterator of the TopoDS_Shape.
-Child sub-shapes are presented in the view as children of the initial shape.
-Iterating recursively by all shapes we obtain a tree view of items shown in the ShapeView.
-
-
-Columns of the View show some information about TopoDS_Shape of the item.
-The most informative column is the last column of TopoDS_Vertex and TopoDS_Edge shape types.
-
-For TopoDS_Vertex it contains the point coordinates,
-
-for TopoDS_Edge it contains the first and the last point coordinates, the edge length and some other parameters.
-
-
-Context popup menu in tree view:
-| Action | Functionality |
-| :----- | :----- |
-| Load BREP file | Opens selected file and appends the result TopoDS_Shape into tree view |
-| Remove all shape items | Clears tree view |
-| BREP view | Shows text view with BREP content of the selected item. It creates BREP file in temporary directory of the plugin. |
-| Close All BREP views | Closes all opened text views |
-| BREP directory | Displays folder where temporary BREP files have been stored.  |
-
-@subsubsection occt_inspector_2_4_3 Elements cooperation
-
-Selection of one or several items in TopoDS_Shape View creates AIS_Shape presentation for it and displays it in the 3D View.
-
-
-
-@section occt_inspector_3 Common controls
-@subsection occt_inspector_3_1 3D View
-
-@subsubsection occt_inspector_3_1_1 Overview
-
-@figure{3DView.png, "3D View"}
-
-Control for OCCT 3D viewer. It creates visualization view components with possibilities to perform some
-user actions for the view.
-
-
-@subsubsection occt_inspector_3_1_2 Elements
-
-@figure{3DView_elements.svg,"3DView Elements"}
-
-3D View contains:
-| Element | Functionality |
-| :----- | :----- |
-| 3D view | V3d viewer with mouse events processing |
-| Context | choice of another context that should be used in the plugin. <br> It is possible to use the next contexts:<br> Own - context of this view, <br> External - context come in parameters which intializes plugin, <br> None - do not perform visualization at all |
-| Multi/Single | Buttons defined what to do with the previous displayed objects: <br> Multi displays new presentations in additional to already displayed, <br> Single removes all previuos displayed presentations |
-| Clean | Removes all displayed presentations |
-| Fit All,<br> Fit Area,<br> Zoom,<br> Pan,<br> Rotation | Scene manipulation actions |
-| Display Mode | Sets *AIS_Shading* or *AIS_WireFrame* display mode for all presentations |
-
-
-@section occt_inspector_6 TInspectorEXE sample
-
-Inspector functionality can be tried using this sample.
-
-Use *inspector.bat* script file placed in binary directory of OCCT to launch it.
-
-This script accepts the names of plugin's DLL that should be loaded. By default it loads all described above plugins.
-
-
-@figure{TStandaloneEXE.png, "TStandaloneEXE"}
-
-Click on the Open button shows the dialog to select a file. The user is able to select one of the sample files or load own one.
-@figure{TStandaloneEXE_open.png, ""}
-
-Depending on the active plugin, the following files should be selected in the dialog:
-OCAF document or STEP files for DFBRowser and BREP files for VInspector and ShapeView plugins.
-
-It is possible to click the file name in the proposed directory, enter it manually or using Browser button.
-The last Loading icon becomes enabled if file name is correct.
-
-
-By default TInspectorEXE opens the next files for plugins:
-| Plugin DLL library name | Files |
-| :----- | :----- |
-| TKDFBrowser | step/screw.step |
-| TKVInspector | occ/hammer.brep |
-| TKShapeView | occ/face1.brep, <br> occ/face2.brep |
-
-These files are found relatively *CSF_OCCTDataPath*.
-
-
-Source code of TIspectorEXE is a good sample for @ref occt_inspector_8 "Using Inspector in a custom application".
-
-
-@section occt_inspector_7 Launch in DRAW Test Harness
-
-TKToolsDraw plugin is created to provide DRAW commands for Qt tools. Use INSPECTOR parameter of @ref occt_draw_1_3_3 "pload" 
-command to download commands of this library. It contains tinspector command to start Inspector under DRAW.
-See more detailed description of the @ref occt_draw_13_1 "tinspector" command.
-
-The simple code to start Inspector with all plugins loaded:
-
-~~~~~
-pload INSPECTOR
-tinspector
-~~~~~
-
-@figure{drawexe_tinspector.png,"tinspector"}
-
-Result of this command is the next:
-- all available Plugins are presented in the Inspector. These are @ref occt_inspector_2_2 "DFBrowser", @ref occt_inspector_2_3 "VInspector" and  @ref occt_inspector_2_4 "ShapeView".
-- DFBrowser is an active plugin
-- tree of OCAF is empty.
-
-After, we should create objects in DRAW and update tinspector.
-
-@section occt_inspector_8 Using in a custom application
-
-To use Inspector in an application, the next steps should be done:
-* Set dependencies to OCCT and Qt in application (Header and Link)
-* Create an instance of TInspector_Communicator.
-* Register plugins of interest in the communicator by DLL library name
-* Initialize communicator with objects that will be investigated
-* Set visible true for commumicator
-
-
-C++ code is similar:
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.cpp}
-
-#include <inspector/TInspector_Communicator.hxx>
-
-static TInspector_Communicator* MyTCommunicator;
-
-void CreateInspector()
-{
-  NCollection_List<Handle(Standard_Transient)> aParameters;
-  //... append parameters in the list
-
-  if (!MyTCommunicator)
-  {
-    MyTCommunicator = new TInspector_Communicator();
-
-    MyTCommunicator->RegisterPlugin ("TKDFBrowser");
-    MyTCommunicator->RegisterPlugin ("TKVInspector");
-    MyTCommunicator->RegisterPlugin ("TKShapeView");
-
-    MyTCommunicator->Init (aParameters);
-    MyTCommunicator->Activate ("TKDFBrowser");
-  }
-  MyTCommunicator->SetVisible (true);
-}
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-| Plugin | to be initialized by |
-| :----- | :----- |
-| TKDFBrowser | TDocStd_Application |
-| TKVInspector | AIS_InteractiveContext |
-| TKShapeView | TopoDS_TShape |
-
-
-
-@section occt_inspector_4 Build procedure
-
-By default the Inspector compilation is off.
-To compile it, set the <b>BUILD_Inspector</b> flag to "ON". See @ref build_cmake_conf "Configuration process".
-
-When this option is switched On, MS Visual Studio project has an additional tree of folders:
-
-@figure{VStudio_projects.png,"Inspector packages in MS Visual Studio"}
-
-
-@section occt_inspector_5 Sources and packaging
-
-OCCT sources are extended by the /tools directory.
-
-Distribution of packages participated in plugins:
-| Sources packages| Plugin |
-| :----- | :----- |
-| DFBrowser, <br> DFBrowserPane, <br> DFBrowserPaneXDE, <br> TKDFBrowser | DFBrowser |
-| VInspector, <br> TKVInspector  | VInspector |
-| ShapeView, <br> TKShapeView | ShapeView |
-
-Other packages:
-| Sources packages| Used in |
-| :----- | :----- |
-| TInspectorAPI, <br> TKInspectorAPI | Iterface for connection to plugin. |
-| TreeModel, <br> TKTreeView | Items-oriented model to simplify work with GUI tree control. |
-| View, <br> TKView | 3D View component |
-| TInspector, <br> TKTInspector  | Inspector window where plugins are placed |
-| ToolsDraw, <br> TKToolsDraw | Plugin for DRAW to start Inspector |
-
-
-In MSVC studio the separate folder contains Inspector projects.
-
-@section occt_inspector_9 Glossary
-* **Component** -- OCCT part, e.g. OCAF, VISUALIZATION, MODELING and others. 
-* **Plugin** -- library that is loaded in some executable/library. Here, the plugins are:
-  * DFBrowser,
-  * ShapeView,
-  * VInspector.
-
-@subsection occt_attribute_simple_types TDF_Attribute Simple types
-Types where the content is a single value
-
-| Type | Kind of value |
-| :----- | :----- |
-| TDataStd_AsciiString | TDataStd_AsciiString |
-| TDataStd_Comment | TCollection_ExtendedString |
-| TDataStd_Integer | Standard_Integer |
-| TDataStd_Name | TCollection_ExtendedString |
-| TDataStd_Real | Standard_Real |
-| TDF_Reference | TDF_Label |
-| TDF_TagSource | Standard_Integer |
-
-
-@subsection occt_attribute_list_types TDF_Attribute List types
-
-| Type | Kind of value (container of) |
-| :----- | :----- |
-| TDataStd_BooleanList | Standard_Boolean |
-| TDataStd_ExtStringList | TCollection_ExtendedString |
-| TDataStd_IntegerList | Standard_Integer |
-| TDataStd_RealList | Standard_Real |
-| TDataStd_ReferenceList | TDF_Label |
-
-@subsection occt_attribute_array_types TDF_Attribute Array types
-
-| Type | Kind of value (container of) |
-| :----- | :----- |
-| TDataStd_BooleanArray | Standard_Boolean |
-| TDataStd_ByteArray | Standard_Byte |
-| TDataStd_ExtStringArray | TCollection_ExtendedString |
-| TDataStd_IntegerArray | Standard_Integer |
-| TDataStd_RealArray | Standard_Real |
-| TDataStd_ReferenceArray | TDF_Label |
-
-@subsection occt_attribute_xde_tree_node_id XDE tree node ID description
-| GUID | Text |
-| :----- | :----- |
-| XCAFDoc::ShapeRefGUID() | Shape Instance Link |
-| XCAFDoc::ColorRefGUID (XCAFDoc_ColorGen) | Generic Color Link |
-| XCAFDoc::ColorRefGUID (XCAFDoc_ColorSurf) | Surface Color Link |
-| XCAFDoc::ColorRefGUID (XCAFDoc_ColorCurv) | Curve Color Link |
-| XCAFDoc::DimTolRefGUID() | DGT Link |
-| XCAFDoc::DatumRefGUID() | Datum Link |
-| XCAFDoc::MaterialRefGUID() | Material Link |
-

dox/user_guides/user_guides.md

@@ -17,5 +17,4 @@ OCCT User Guides are organized by OCCT modules:
   * @subpage occt_user_guides__xde  "Extended Data Exchange (XDE)"
 * @subpage occt_user_guides__ocaf "Open CASCADE Application Framework (OCAF)"
   * @subpage occt_user_guides__tobj "TObj package"
-* @subpage occt_user_guides__test_harness "DRAW Test Harness"
-* @subpage occt_user_guides__inspector "Inspector"
+* @subpage occt_user_guides__test_harness "DRAW Test Harness"

dox/user_guides/visualization/images/visualization_image020.svg

@@ -1,530 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="500"
-   height="300"
-   id="svg4656"
-   version="1.1"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="visualization_image020.svg">
-  <defs
-     id="defs4658" />
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1.4142136"
-     inkscape:cx="408.79147"
-     inkscape:cy="193.9858"
-     inkscape:document-units="px"
-     inkscape:current-layer="g9010"
-     showgrid="false"
-     inkscape:window-width="1920"
-     inkscape:window-height="976"
-     inkscape:window-x="-8"
-     inkscape:window-y="-8"
-     inkscape:window-maximized="1"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0" />
-  <metadata
-     id="metadata4661">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-87.454854,-696.05721)">
-    <g
-       id="g9010"
-       transform="translate(12.75,28.5)">
-      <g
-         id="g4235"
-         transform="translate(9.102291,335.55339)">
-        <g
-           id="g4226">
-          <path
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 261.39235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             id="path4222"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             inkscape:connector-curvature="0"
-             id="path4224"
-             d="m 126.21266,412.7994 7.86719,4.13281 135.1875,0 -7.88187,-4.23084 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             sodipodi:nodetypes="ccccc" />
-          <rect
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1"
-             id="rect4218"
-             width="135.25"
-             height="20"
-             x="126.20485"
-             y="392.80722" />
-        </g>
-        <text
-           sodipodi:linespacing="125%"
-           id="text4231"
-           y="405.80722"
-           x="133.70485"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           xml:space="preserve"><tspan
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'"
-             y="405.80722"
-             x="133.70485"
-             id="tspan4233"
-             sodipodi:role="line">AIS_Shape::SetColor</tspan></text>
-      </g>
-      <g
-         transform="translate(241.03331,337.84807)"
-         id="g4243">
-        <g
-           id="g4245">
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4247"
-             d="m 307.14235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 126.21266,412.7994 7.86719,4.13281 180.9375,0 -7.88187,-4.23084 z"
-             id="path4249"
-             inkscape:connector-curvature="0" />
-          <path
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1"
-             d="m 126.20485,392.80722 181,0 0,20 -181,0 z"
-             id="rect4251"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-        </g>
-        <text
-           xml:space="preserve"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           x="133.70485"
-           y="405.80722"
-           id="text4253"
-           sodipodi:linespacing="125%"><tspan
-             sodipodi:role="line"
-             id="tspan4255"
-             x="133.70485"
-             y="405.80722"
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'">Prs3d_Drawer::FreeBoundaryAspect</tspan></text>
-      </g>
-      <g
-         id="g4258"
-         transform="translate(241.03331,372.18141)">
-        <g
-           id="g4260">
-          <path
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 320.14235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             id="path4262"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             inkscape:connector-curvature="0"
-             id="path4264"
-             d="m 126.21266,412.7994 7.86719,4.13281 193.9375,0 -7.88187,-4.23084 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4266"
-             d="m 126.20485,392.80722 194,0 0,20 -194,0 z"
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1" />
-        </g>
-        <text
-           sodipodi:linespacing="125%"
-           id="text4268"
-           y="405.80722"
-           x="133.70485"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           xml:space="preserve"><tspan
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'"
-             y="405.80722"
-             x="133.70485"
-             id="tspan4270"
-             sodipodi:role="line">Prs3d_Drawer::UnFreeBoundaryAspect</tspan></text>
-      </g>
-      <g
-         id="g4272"
-         transform="translate(241.03331,406.51476)">
-        <g
-           id="g4274">
-          <path
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 263.89235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             id="path4276"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             inkscape:connector-curvature="0"
-             id="path4278"
-             d="m 126.21266,412.7994 7.86719,4.13281 137.6875,0 -7.88187,-4.23084 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4280"
-             d="m 126.20485,392.80722 137.75,0 0,20 -137.75,0 z"
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1" />
-        </g>
-        <text
-           sodipodi:linespacing="125%"
-           id="text4282"
-           y="405.80722"
-           x="133.70485"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           xml:space="preserve"><tspan
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'"
-             y="405.80722"
-             x="133.70485"
-             id="tspan4284"
-             sodipodi:role="line">Prs3d_Drawer::UIsoAspect</tspan></text>
-      </g>
-      <g
-         transform="translate(241.03331,440.84807)"
-         id="g4286">
-        <g
-           id="g4288">
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4290"
-             d="m 263.89235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 126.21266,412.7994 7.86719,4.13281 137.6875,0 -7.88187,-4.23084 z"
-             id="path4292"
-             inkscape:connector-curvature="0" />
-          <path
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1"
-             d="m 126.20485,392.80722 137.75,0 0,20 -137.75,0 z"
-             id="path4294"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-        </g>
-        <text
-           xml:space="preserve"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           x="133.70485"
-           y="405.80722"
-           id="text4296"
-           sodipodi:linespacing="125%"><tspan
-             sodipodi:role="line"
-             id="tspan4298"
-             x="133.70485"
-             y="405.80722"
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'">Prs3d_Drawer::VIsoAspect</tspan></text>
-      </g>
-      <g
-         id="g4300"
-         transform="translate(241.03331,475.18141)">
-        <g
-           id="g4302">
-          <path
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 278.64235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             id="path4304"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             inkscape:connector-curvature="0"
-             id="path4306"
-             d="m 126.21266,412.7994 7.86719,4.13281 152.4375,0 -7.88187,-4.23084 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4308"
-             d="m 126.20485,392.80722 152.5,0 0,20 -152.5,0 z"
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1" />
-        </g>
-        <text
-           sodipodi:linespacing="125%"
-           id="text4310"
-           y="405.80722"
-           x="133.70485"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           xml:space="preserve"><tspan
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'"
-             y="405.80722"
-             x="133.70485"
-             id="tspan4312"
-             sodipodi:role="line">Prs3d_Drawer::ShadingAspect</tspan></text>
-      </g>
-      <g
-         transform="translate(241.03331,509.51473)"
-         id="g4314">
-        <g
-           id="g4316">
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4318"
-             d="m 282.89235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 126.21266,412.7994 7.86719,4.13281 156.6875,0 -7.88187,-4.23084 z"
-             id="path4320"
-             inkscape:connector-curvature="0" />
-          <path
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1"
-             d="m 126.20485,392.80722 156.75,0 0,20 -156.75,0 z"
-             id="path4322"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-        </g>
-        <text
-           xml:space="preserve"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           x="133.70485"
-           y="405.80722"
-           id="text4324"
-           sodipodi:linespacing="125%"><tspan
-             sodipodi:role="line"
-             id="tspan4326"
-             x="133.70485"
-             y="405.80722"
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'">Prs3d_Drawer::SeenLineAspect</tspan></text>
-      </g>
-      <g
-         id="g4334"
-         transform="translate(241.03331,543.84807)">
-        <g
-           id="g4336">
-          <path
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 292.64235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             id="path4338"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             inkscape:connector-curvature="0"
-             id="path4340"
-             d="m 126.21266,412.7994 7.86719,4.13281 166.4375,0 -7.88187,-4.23084 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4342"
-             d="m 126.20485,392.80722 166.5,0 0,20 -166.5,0 z"
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1" />
-        </g>
-        <text
-           sodipodi:linespacing="125%"
-           id="text4344"
-           y="405.80722"
-           x="133.70485"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           xml:space="preserve"><tspan
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'"
-             y="405.80722"
-             x="133.70485"
-             id="tspan4346"
-             sodipodi:role="line">Prs3d_Drawer::HiddenLineAspect</tspan></text>
-      </g>
-      <text
-         xml:space="preserve"
-         style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         x="82.119072"
-         y="740.68671"
-         id="text4348"
-         sodipodi:linespacing="125%"><tspan
-           sodipodi:role="line"
-           id="tspan4350"
-           x="82.119072"
-           y="740.68671"
-           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans Bold'">Change:</tspan></text>
-      <text
-         sodipodi:linespacing="125%"
-         id="text4352"
-         y="736.18671"
-         x="298.11908"
-         style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         xml:space="preserve"><tspan
-           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans Bold'"
-           y="736.18671"
-           x="298.11908"
-           id="tspan4354"
-           sodipodi:role="line">redefine:</tspan></text>
-      <path
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         d="m 285.11906,740.81172 58,0 0,210"
-         id="path4356"
-         inkscape:connector-curvature="0" />
-      <path
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         d="m 367.0034,946.85011 -24.04163,0"
-         id="path4358"
-         inkscape:connector-curvature="0" />
-      <path
-         inkscape:connector-curvature="0"
-         id="path4360"
-         d="m 367.0034,912.51677 -24.04163,0"
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
-      <path
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         d="m 367.0034,878.18345 -24.04163,0"
-         id="path4362"
-         inkscape:connector-curvature="0" />
-      <path
-         inkscape:connector-curvature="0"
-         id="path4364"
-         d="m 367.0034,843.85011 -24.04163,0"
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
-      <path
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         d="m 367.0034,809.5168 -24.04163,0"
-         id="path4366"
-         inkscape:connector-curvature="0" />
-      <path
-         inkscape:connector-curvature="0"
-         id="path4368"
-         d="m 367.0034,775.18345 -24.04163,0"
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
-      <path
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         d="m 367.0034,740.85011 -24.04163,0"
-         id="path4370"
-         inkscape:connector-curvature="0" />
-      <g
-         transform="translate(9.102291,289.55339)"
-         id="g4417">
-        <g
-           id="g4419">
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4421"
-             d="m 261.39235,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 126.21266,412.7994 7.86719,4.13281 135.1875,0 -7.88187,-4.23084 z"
-             id="path4423"
-             inkscape:connector-curvature="0" />
-          <rect
-             y="392.80722"
-             x="126.20485"
-             height="20"
-             width="135.25"
-             id="rect4425"
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1" />
-        </g>
-        <text
-           xml:space="preserve"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           x="133.70485"
-           y="405.80722"
-           id="text4427"
-           sodipodi:linespacing="125%"><tspan
-             sodipodi:role="line"
-             id="tspan4429"
-             x="133.70485"
-             y="405.80722"
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'">AIS_TextLabel::SetColor</tspan></text>
-      </g>
-      <g
-         id="g4431"
-         transform="translate(241.03331,291.84807)">
-        <g
-           id="g4433">
-          <path
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             d="m 264.36239,392.80721 7.875,4.25 0,19.875 -7.8975,-4.09022 z"
-             id="path4435"
-             inkscape:connector-curvature="0"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             inkscape:connector-curvature="0"
-             id="path4437"
-             d="m 126.21266,412.7994 7.86719,4.13281 138.15754,0 -7.88187,-4.23084 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
-             sodipodi:nodetypes="ccccc" />
-          <path
-             sodipodi:nodetypes="ccccc"
-             inkscape:connector-curvature="0"
-             id="path4439"
-             d="m 126.20485,392.80722 138.22004,0 0,20 -138.22004,0 z"
-             style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-linejoin:round;stroke-opacity:1" />
-        </g>
-        <text
-           sodipodi:linespacing="125%"
-           id="text4441"
-           y="405.80722"
-           x="133.70485"
-           style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-           xml:space="preserve"><tspan
-             style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans'"
-             y="405.80722"
-             x="133.70485"
-             id="tspan4443"
-             sodipodi:role="line">Prs3d_Drawer::TextAspect</tspan></text>
-      </g>
-      <text
-         sodipodi:linespacing="125%"
-         id="text4445"
-         y="694.68671"
-         x="82.119072"
-         style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         xml:space="preserve"><tspan
-           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans Bold'"
-           y="694.68671"
-           x="82.119072"
-           id="tspan4447"
-           sodipodi:role="line">Change:</tspan></text>
-      <text
-         xml:space="preserve"
-         style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         x="298.11908"
-         y="690.18671"
-         id="text4449"
-         sodipodi:linespacing="125%"><tspan
-           sodipodi:role="line"
-           id="tspan4451"
-           x="298.11908"
-           y="690.18671"
-           style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:10px;font-family:'Open Sans';-inkscape-font-specification:'Open Sans Bold'">redefine:</tspan></text>
-      <path
-         inkscape:connector-curvature="0"
-         id="path4453"
-         d="m 367.0034,694.85011 -82.02439,0"
-         style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         sodipodi:nodetypes="cc" />
-    </g>
-  </g>
-</svg>

dox/user_guides/xde/xde.md

@@ -5,32 +5,116 @@
 
 @section occt_xde_1 Introduction
 
-This manual explains how to use the Extended Data Exchange (XDE). It provides basic documentation on setting up and using XDE. For advanced information on XDE and its applications, see our <a href="http://www.opencascade.com/content/tutorial-learning">E-learning & Training</a> offerings.
+For hierarchically organizing engineering data, OCCT provides application framework (OCAF). A specialization of OCAF for representing CAD product information is XDE (eXtended Data Exchange) toolset. XDE is capable of associating geometry with metadata (PMI, names, colors, layers, etc.). This framework uses the component-level abstraction of an assembly (see \ref occt_xde_references_ShahMantyla95 "[Shah and Mantyla 1995]" for the overview of possible abstractions). The leaf nodes in the XDE hierarchy are the _part instances_. The interior nodes are the _subassemblies_. The root node represents the _entire assembly_ (several roots are allowed).
 
-The Extended Data Exchange (XDE) module allows extending the scope of exchange by translating  additional data attached to geometric BREP data, thereby improving the interoperability with external software. 
-
-Data types such as colors, layers, assembly descriptions and validation properties (i.e. center of gravity, etc.) are supported. These data are stored together with shapes in an XCAF document. It is also possible to add a new types of data taking the existing tools as prototypes.
-
-Finally, the XDE provides reader and writer tools for reading and writing the data supported by XCAF to and from IGES and STEP files. 
-
-@figure{/user_guides/xde/images/646_xde_11_400.png,"Shape imported using XDE",240}
-
-The XDE component requires @ref occt_user_guides__shape_healing "Shape Healing" toolkit for operation. 
+@figure{/user_guides/xde/images/646_xde_11_400.png,"Shape imported using XDE (courtesy of Dave Goetsch via GrabCAD).",240}
 
 @subsection occt_xde_1_1 Basic terms
 
-For better understanding of XDE, certain key terms are defined: 
-* **Shape** -- a standalone shape, which does not belong to the assembly structure.
-* **Instance** -- a replication of another shape with a location that can be the same location or a different one.
-* **Assembly** -- a construction that is either a root or a sub-assembly. 
+We use the following terminology throughout this documentation:
+
+* **Assembly:** a hierarchy of elements representing a complex product.
+
+* **Subassembly:** a group of elements inside an assembly. Typically, a subassembly is a set of components that are physically assembled into a unit and then assembled with other components.
+
+* **Part:** a piece of data representing a simple individual product.
+
+* **Instance:** a *usage occurrence* of a part or a subassembly. An instance is usually mounted to a parent component by specifying relative transformation. It should be noted that whenever term "instance" is used, it may refer to either a part or a subassembly. When an individual part is mentioned, we use a more precise "part instance" term.
+
+* **Assembly item:** any element in the component hierarchy of an assembly. If visualization is employed, an assembly item typically corresponds to an element in a scene graph.
+
+* **Component:** any *nested* assembly item.
+
+The key terms are illustrated in the figure below.
+
+@figure{/user_guides/xde/images/xde_assembly_design.png,"Parts and instances.",240}
+
+The example above assumes that two parts (a plate and a cylinder) are created independently in some part design system. Then an assembly is constructed by instantiating these parts with some user-defined mutual placements (probably driven by assembly constraints). In this example, the root assembly item "MyAssembly" contains the following components:
+
+* "Plate" as the only instance of the plate part.
+* "Cylinders" as the subassembly which includes three instances of a cylinder part.
+
+A CAD part in a design system has usually no link to other parts in a product unless it is dropped to an assembly structure. To become an assembly component, the part has to be instantiated. An instance is technically a reference to the part with a proper location. The distinction between *parts* and *instances* is one of the fundamental principles in assembly design. A single part may have multiple instances all sharing the same product information (geometry and metadata). It is also valid to associate metadata with the instances themselves, though the latter is not very common (and not fully supported in OCCT).
+
+\note The important point is the distinction between parts and instances. A part is a single product which may several times occur in an assembly. An instance is a particular occurrence of a part in an assembly.
 
 @subsection occt_xde_1_2 XDE Organization
 
-The basis of XDE, called XCAF, is a framework based on OCAF (Open CASCADE Technology Application Framework) and is intended to be used with assemblies and with various kinds of attached data (attributes). Attributes can be Individual attributes for a shape, specifying some characteristics of a shape, or they can be Grouping attributes, specifying that a shape belongs to a given group whose definition is specified apart from the shapes. 
+@subsubsection occt_xde_1_2_1 Assemblies
 
-XDE works in an OCAF document with a specific organization defined in a dedicated XCAF module. This organization is used by various functions of XDE to exchange standardized data other than shapes and geometry. 
+Assembly components are represented as nodes in a directed graph. The arcs of the graph represent "part-of" relations between the components (read like "component A is part of component B"). The following figure illustrates a conventional assembly from \ref occt_xde_references_cax_if "[CAx-IF STEP Library]" composed of five unique parts.
 
-The Assembly Structure and attributes assigned to shapes are stored in the OCAF tree. It is possible to obtain TopoDS representation for each level of the assembly in the form of *TopoDS_Compound* or *TopoDS_Shape* using the API. 
+@figure{/user_guides/xde/images/xde_as1.png,"Sample assembly.",240}
+
+Each part is defined in its local coordinate system and dropped to an assembly with a suitable placement. As such, the bolt has six instances, while a nut is instantiated eight times.
+
+@figure{/user_guides/xde/images/xde_as1_parts.png,"Parts of sample assembly.",240}
+
+The "part-of" graph is sketched in the following figure.
+
+@figure{/user_guides/xde/images/xde_as1_part_of_graph.png,"\"Part-of\" assembly graph.",240}
+
+There are as many component occurrences in an assembly as many paths exist to each leaf from the root nodes. Starting from the root node "as1", 18 unique ways are giving the total number of part occurrences in the component structure.
+
+Technically, each node of the graph is represented by a label in the underlying OCAF structure. However, an OCAF label (TDF_Label) cannot be used as an identifier of an assembly item. In general case, one label can be reached from several "directions" of traversal. Thus, to address a single component occurrence unambiguously, one should use a full path to the occurrence in a component graph as an identifier. The following figure illustrates the result of assembly graph traversal which can be represented as a user-friendly tree (scene graph).
+
+@figure{/user_guides/xde/images/xde_as1_part_of_tree.png,"\"Part-of\" assembly tree.",240}
+
+Such a tree stands for the hierarchy of the components which can be shown to the user. A child-parent relation has "part-of" meaning. Notice that an individual node in the assembly tree is associated with a unique path to the item in the component graph. The following figure illustrates a simple bracket subassembly which is used twice as a component in the sample model.
+
+@figure{/user_guides/xde/images/xde_as1_bracket_subassembly.png,"Bracket subassembly instantiated twice in sample model.",240}
+
+The following figure outlines the component graph for this subassembly.
+
+@figure{/user_guides/xde/images/xde_as1_bracket_subassembly_graph.png,"\"Part-of\" graph for bracket subassembly.",240}
+
+Assembly structure is not directly related to any geometry. Therefore, assembly structure gives only a conceptual view of a product. According to \ref occt_xde_references_ShahMantyla95 "[Shah and Mantyla 1995]" (p. 9), many design tasks are not related to geometry at all, but to other characteristics of a product. Some problems involve idealized or simplified geometry, and it often happens that a detailed geometry is not even required (at least during some design phases). At the same time, the geometric model for a subassembly in XDE can be directly accessed at any time in the form of *TopoDS_Compound*.
+
+XDE defines the specific organization of the assembly content. All elements are stored at sub-labels of label 0:1:1. There can be one or more roots. The hierarchy of labels is always two-levels nested. The first level (direct children of 0:1:1) declares all products within an assembly. The second level determines the "part-of" relations between the assembly elements.
+
+@figure{/user_guides/xde/images/xde_assembly_ocaf.png,"Internal (OCAF) representation of XDE document.",240}
+
+@subsubsection occt_xde_1_2_2 How to explore assembly structure
+
+To explore the assembly structure, you may use a specialized *XCAFDoc_AssemblyGraph* tool. The following code snippet illustrates the construction of explicit assembly graph from XDE document.
+
+\code
+  Handle(TDocStd_Document) doc = ...; // Your XDE document
+
+  // Prepare assembly graph
+  Handle(XCAFDoc_AssemblyGraph) asmGraph = new XCAFDoc_AssemblyGraph(doc, true);
+\endcode
+
+*XCAFDoc_AssemblyGraph* does not contain geometry of the assembly being explored. It is a formal graph structure which makes explicit the "part-of" relations between the assembly components. Each node in a graph is associated with one of the following types:
+
+* **Root:**
+* **Subassembly**
+* **Part occurrence**
+* **Part**
+
+A node contains a persistent ID which points to the corresponding OCAF label. The persistent ID is a key to access geometric representations and metadata associated with the corresponding element of assembly.
+
+@subsubsection occt_xde_1_2_3 Multiple component occurrences
+
+Consider two parts: wheel and axle shown in the picture below.
+
+@figure{/user_guides/xde/images/assm_wheel_axle.png,"Two parts: wheel and axle.",240}
+
+Consider a wheel-axle subassembly composed of one axle and two wheels.
+
+@figure{/user_guides/xde/images/assm_wheel_axle_sa.png,"Subassembly composed of two wheels and one axle.",240}
+
+A higher-level chassis assembly is in turn composed of two wheel-axle subassemblies, the front, and the rear.
+
+@figure{/user_guides/xde/images/assm_wheel_axle_root.png,"Chassis assembly with multiple component occurrences.",240}
+
+There is a requirement to identify individual components such as the left-front wheel. However, a wheel part has only two instances in the owner wheel-axle subassembly. The necessity to uniquely identify all component occurrences requires introducing a *transient* key for the corresponding assembly item. This key is essentially a path in the component graph which unambiguously addresses the element in question.
+
+\note As reported by \ref occt_xde_references_Ungerer02 "[Ungerer and Buchanan 2002]", STEP PDM Schema is capable of tracking specific usages of assembly components. However, OCCT makes no assumption on the used STEP schema, so multiple component occurrences should be implemented at the level of XDE-based application.
+
+\todo mention Grab Instance
+
+//////////////////////////////////////////////////////////
 
 Basic elements used by XDE are introduced in the XCAF sub-module by the package XCAFDoc. These elements consist in descriptions of commonly used data structures (apart from the shapes themselves) in normalized data exchanges. They are not attached to specific applications and do not bring specific semantics, but are structured according to the use and needs of data exchanges. 
 The Document used by XDE usually starts as a *TDocStd_Document*. 
@@ -45,9 +129,7 @@ For example, a mechanical assembly can be defined as follows:
 @figure{/user_guides/xde/images/xde_image004.png,"Assembly View",240}
 
 
-XDE defines the specific organization of the assembly content. Shapes are stored on sub-labels of label 0:1:1. There can be one or more roots (called free shapes) whether they are true trees or simple shapes. A shape can be considered to be an Assembly (such as AS1 under 0:1:1:1 in Figure1) if it is defined with Components (sub-shapes, located or not). 
 
-*XCAFDoc_ShapeTool* is a tool that allows managing the Shape section of the XCAF document. This tool is implemented as an attribute and located at the root label of the shape section. 
 
 @subsection occt_xde_1_4 Validation Properties
 Validation properties are geometric characteristics of Shapes (volume, centroid, surface area) written to STEP files by the sending system. These characteristics are read by the receiving system to validate the quality of the translation. This is done by comparing the values computed by the original system with the same values computed by the receiving system on the resulting model. 
@@ -91,26 +173,6 @@ XDE can read and write colors and layers assigned to shapes or their subparts (d
   
  @figure{/user_guides/xde/images/xde_image006.png,"Colors and Layers",240}
 
-@subsection occt_xde_1_7 Custom notes
- 
-Custom notes is a kind of application specific data attached to assembly items, their attributes and sub-shapes. Basically, there are simple textual comments, binary data and other application specific data. Each note is provided with a timestamp and the user created it.
-
-Notes API provides the following functionality:
-  * Returns total number of notes and annotated items
-  * Returns labels for all notes and annotated items
-  * Creates notes:
-    - Comment note from a text string
-    - Binary data note from a file or byte array
-  * Checks if an assembly item is annotated
-  * Finds a label for the annotated item
-  * Returns all note labels for the annotated item
-  * Add a note to item(s):
-    - Assembly item
-    - Assembly item attribute
-    - Assembly item subshape index
-  * Remove note(s) from an annotated assembly item; orphan note(s) might be deleted optionally (items without linked notes will be deleted automatically)
-  * Delete note(s) and removes them from annotated items
-  * Get / delete orphan notes
 
 @section occt_xde_2 Working with XDE
 
@@ -627,136 +689,6 @@ To remove a Color and all the references to it (so that the related shapes will
 myColors->RemoveColor(ColLabel); 
 ~~~~~
 
-@subsection occt_xde_2_7 Custom notes
-
-In an XDE document, custom notes are managed by the class *XCAFDoc_NotesTool*. This is done with the same principles as for ShapeTool with Shapes, and with the same capability of having a tool on the Main Label, or on any sub-label. The Property itself is defined as sub-classes of an *XCAFDoc_Note* abstract class, which is a sub-class of *TDF_Attribute* one. 
-
-Custom notes are stored in a child of the *XCAFDoc_NotesTool* label: it is at label 0.1.9.1. Each note then corresponds to a dedicated label. A note may be attached to a document item identified by a label, a sub-shape identified by integer index or an attribute identified by GUID. Annotations are stored in a child of the *XCAFDoc_NotesTool* label: it is at label 0.1.9.2.
-Notes binding is done through *XCAFDoc_GraphNode* attribute.
-
-  @figure{/user_guides/xde/images/xde_notes001.png,"Structure of notes part of XCAF document",240}
-  
-@subsubsection occt_xde_2_7_1 Initialization
-
-To query, edit, or initialize a Document to handle custom notes of XCAF, use: 
-~~~~~
-Handle(XCAFDoc_NotesTool) myNotes = 
-XCAFDoc_DocumentTool::NotesTool(Doc->Main ()); 
-~~~~~
-This call can be used at any time. The first time it is used, a relevant structure is added to the document. This definition is used for all the following notes calls and will not be repeated for these. 
-  
-@subsubsection occt_xde_2_7_2 Creating Notes
-
-Before annotating a Document item a note must be created using one of the following methods of *XCAFDoc_NotesTool* class:
-- CreateComment : creates a note with a textual comment
-- CreateBinData : creates a note with arbitrary binary data, e.g. contents of a file
-
-Both methods return an instance of *XCAFDoc_Note* class.
-~~~~~
-Handle(XCAFDoc_NotesTool) myNotes = ...
-Handle(XCAFDoc_Note) myNote = myNotes->CreateComment("User", "Timestamp", "Hello, World!");
-~~~~~
-This code adds a child label to label 0.1.9.1 with *XCAFDoc_NoteComment* attribute.
-
-@subsubsection occt_xde_2_7_3 Editing a Note
-An instance of *XCAFDoc_Note* class can be used for note editing.
-One may change common note data.
-~~~~~
-myNote->Set("New User", "New Timestamp");
-~~~~~
-To change specific data one need to down cast *myNote* handle to the appropriate sub-class:
-~~~~~
-Handle(XCAFDoc_NoteComment) myCommentNote = Handle(XCAFDoc_NoteComment)::DownCast(myNote);
-if (!myCommentNote.IsNull()) {
-  myCommentNote->Set("New comment");
-}
-~~~~~
-
-@subsubsection occt_xde_2_7_4 Adding Notes
-
-Once a note has been created it can be bound to a Document item using the following *XCAFDoc_NotesTool* methods:
-- AddNote : binds a note to a label
-- AddNoteToAttr : binds a note to a label's attribute
-- AddNoteToSubshape : binds a note to a sub-shape
-
-All methods return a pointer to *XCAFDoc_AssemblyItemRef* attribute identifying the annotated item.
-~~~~~
-Handle(XCAFDoc_NotesTool) myNotes = ...
-Handle(XCAFDoc_Note) myNote = ...
-TDF_Label theLabel; ...
-Handle(XCAFDoc_AssemblyItemRef) myRef = myNotes->AddNote(myNote->Label(), theLabel);
-Standard_GUID theAttrGUID; ...
-Handle(XCAFDoc_AssemblyItemRef) myRefAttr = myNotes->AddNoteToAttr(myNote->Label(), theAttrGUID);
-Standard_Integer theSubshape = 1;
-Handle(XCAFDoc_AssemblyItemRef) myRefSubshape = myNotes->AddNoteToSubshape(myNote->Label(), theSubshape);
-~~~~~
-This code adds three child labels to label 0.1.9.2 with *XCAFDoc_AssemblyItemRef* attribute with *XCAFDoc_GraphNode* attributes added to this and note labels.
-
-@subsubsection occt_xde_2_7_5 Finding Notes
-
-To find annotation labels under label 0.1.9.2 use the following *XCAFDoc_NotesTool* methods:
-- FindAnnotatedItem : returns an annotation label for a label
-- FindAnnotatedItemAttr : returns an annotation label for a label's attribute
-- FindAnnotatedItemSubshape : returns an annotation label for a sub-shape
-
-~~~~~
-Handle(XCAFDoc_NotesTool) myNotes = ...
-TDF_Label theLabel; ...
-TDF_Label myLabel = myNotes->FindAnnotatedItem(theLabel);
-Standard_GUID theAttrGUID; ...
-TDF_Label myLabelAttr = myNotes->FindAnnotatedItemAttr(theLabel, theAttrGUID);
-Standard_Integer theSubshape = 1;
-TDF_Label myLabelSubshape = myNotes->FindAnnotatedItemSubshape(theLabel, theSubshape);
-~~~~~
-Null label will be returned if there is no corresponding annotation.
-
-To get all notes of the Document item use the following *XCAFDoc_NotesTool* methods:
-- GetNotes : outputs a sequence of note labels bound to a label
-- GetAttrNotes : outputs a sequence of note labels bound to a label's attribute
-- GetAttrSubshape : outputs a sequence of note labels bound to a sub-shape
-
-All these methods return the number of notes.
-~~~~~
-Handle(XCAFDoc_NotesTool) myNotes = ...
-TDF_Label theLabel; ...
-TDF_LabelSequence theNotes;
-myNotes->GetNotes(theLabel, theNotes);
-Standard_GUID theAttrGUID; ...
-TDF_LabelSequence theNotesAttr;
-myNotes->GetAttrNotes(theLabel, theAttrGUID, theNotesAttr);
-Standard_Integer theSubshape = 1;
-TDF_LabelSequence theNotesSubshape;
-myNotes->GetAttrSubshape(theLabel, theSubshape, theNotesSubshape);
-~~~~~
-
-@subsubsection occt_xde_2_7_6 Removing Notes
-
-To remove a note use one of the following *XCAFDoc_NotesTool* methods:
-- RemoveNote : unbinds a note from a label
-- RemoveAttrNote : unbinds a note from a label's attribute
-- RemoveSubshapeNote : unbinds a note from a sub-shape
-
-~~~~~
-Handle(XCAFDoc_Note) myNote = ...
-TDF_Label theLabel; ...
-myNotes->RemoveNote(myNote->Label(), theLabel);
-Standard_GUID theAttrGUID; ...
-myRefAttr = myNotes->RemoveAttrNote(myNote->Label(), theAttrGUID);
-Standard_Integer theSubshape = 1;
-myNotes->RemoveSubshapeNote(myNote->Label(), theSubshape);
-~~~~~
-A note will not be deleted automatically.
-Counterpart methods to remove all notes are available too.
-  
-@subsubsection occt_xde_2_7_7 Deleting Notes
-
-To delete note(s) use the following *XCAFDoc_NotesTool* methods:
-- DeleteNote : deletes a single note
-- DeleteNotes : deletes a sequence of notes
-- DeleteAllNotes : deletes all Document notes
-- DeleteOrphanNotes : deletes notes not bound to Document items
-
-All these methods excepting the last one break all links with Document items as well.
   
 @subsection occt_xde_2_8 Reading and Writing STEP or IGES
 Note that saving and restoring the document itself are standard OCAF operations. As the various previously described definitions enter into this frame, they will not be explained any further. 
@@ -835,3 +767,14 @@ As a result, if an application works on Assemblies, on Colors or Layers, on Vali
 
 In addition, if an application has a data structure far from these notions, it can get data (such as Colors and Names on Shapes) according to its needs, but without having to consider the whole. 
 
+@section occt_xde_references References
+
+-# \anchor occt_xde_references_ShahMantyla95
+  Shah J., Mantyla M. Parametric and Feature Based CAD/CAM. 1995.
+
+-# \anchor occt_xde_references_cax_if
+  CAx-IF STEP File Library // URL: https://cax-if.org/library/index.html
+
+-# \anchor occt_xde_references_Ungerer02
+  Ungerer, M. and Buchanan, K. 2002. Usage Guide for the STEP PDM Schema Release 4.3. PDM Implementor Forum, Darmstadt January.
+

samples/ios/UIKitSample/ReadMe.md

@@ -1,11 +1,4 @@
-OCCT sample for iOS {#occt_samples_ios_uikit}
-================== 
-
-UIKitSample consists of the Open CASCADE 3D Viewer which provides import of STEP files and toolbar with three buttons.
-
-The first and second buttons serve for import hardcoded STEP files. The third button displays "About" dialog.
-
-The viewer supports zoom, pan and rotate actions. The viewer supports selection of solids as well.
+// This file contains a description of the UIKitSample and step-by-step instructions how to build and run it.
 
 Installation and configuration:
     1. Make sure you are running Mac OS version 10.12.1 or above and properly installed XCode version 8.1 or above.
@@ -16,3 +9,8 @@ Installation and configuration:
     6. Select the UIKitSample and go to the "Build Settings" tab. After go to the section "Search Paths" and in the field "Header Search Paths" specify a path to the OCCT inc folder. Next in the field "Library Search Paths" specify a path/paths to the OCCT static libraries and Freetype2 static library folders.
     7. Connect device and build sample for device or choose simulator as a target and build for simulator.
     8. Run sample.
+
+ Description:
+    UIKitSample consists of the Open CASCADE 3D Viewer which provides import of STEP files and toolbar with three buttons.
+    The first and second buttons serve for import hardcoded STEP files. The third button displays "About" dialog.
+    The viewer supports zoom, pan and rotate actions. The viewer supports selection of solids as well.

samples/qt/Common/src/ApplicationCommon.cxx

@@ -22,16 +22,15 @@ static ApplicationCommonWindow* stApp = 0;
 static QMdiArea* stWs = 0;
 
 ApplicationCommonWindow::ApplicationCommonWindow()
-: QMainWindow( 0 ),
-myNbDocuments( 0 ),
-myIsDocuments(false),
-myStdToolBar( 0 ),
-myCasCadeBar( 0 ),
-myFilePopup( 0 ),
+    : QMainWindow( 0 ),
 myWindowPopup( 0 ),
-myFileSeparator(NULL)
+myFilePopup( 0 ),
+myCasCadeBar( 0 ),
+myStdToolBar( 0 )
 {
+  myNbDocuments = 0;
   stApp = this;
+  myIsDocuments = false;
 
   // create and define the central widget
   QFrame* vb = new QFrame( this );
@@ -347,51 +346,48 @@ ApplicationCommonWindow* ApplicationCommonWindow::getApplication()
 
 void ApplicationCommonWindow::updateFileActions()
 {
-  if (!myDocuments.isEmpty())
+  if ( myDocuments.isEmpty() )
   {
-    return;
-  }
-
-  if ( !myIsDocuments )
-  {
-    QAction* fileQuitAction = NULL;
-    QAction* windowAction = NULL;
-    QList<QAction *> aListActions = myFilePopup->actions();
-    for ( int i = 0; i < aListActions.size(); i++ )
+    if ( !myIsDocuments )
     {
-      if( aListActions.at( i )->text() == QObject::tr("MNU_QUIT") )
+      QAction *fileQuitAction, *windowAction;
+      QList<QAction *> aListActions = myFilePopup->actions();
+      for ( int i = 0; i < aListActions.size(); i++ )
       {
-        fileQuitAction = aListActions.at( i );
-        break;
-      }
-    }
-        
-    if( !fileQuitAction )
-      return;
-      
-    myIsDocuments = true;
-    myCasCadeBar->show();
-
-    QList<QAction *> aListMenuActions = menuBar()->actions();
-    for ( int i = 0; i < aListMenuActions.size(); i++ )
-    {
-      if( aListMenuActions.at( i )->text() == QObject::tr("MNU_HELP") )
-      {
-          windowAction= aListMenuActions.at( i );
+        if( aListActions.at( i )->text() == QObject::tr("MNU_QUIT") )
+        {
+          fileQuitAction = aListActions.at( i );
           break;
+        }
       }
+        
+      if( !fileQuitAction )
+        return;
+      
+      myIsDocuments = true;
+      myCasCadeBar->show();
+
+      QList<QAction *> aListMenuActions = menuBar()->actions();
+      for ( int i = 0; i < aListMenuActions.size(); i++ )
+      {
+        if( aListMenuActions.at( i )->text() == QObject::tr("MNU_HELP") )
+        {
+           windowAction= aListMenuActions.at( i );
+           break;
+        }
+      }
+
+      if( !windowAction )
+        return;
+
+      menuBar()->insertMenu( windowAction, myWindowPopup );
+    }
+    else
+    {
+      myIsDocuments = false;
+      myCasCadeBar->hide();
+      menuBar()->removeAction( myWindowPopup->menuAction() );
     }
-
-    if( !windowAction )
-      return;
-
-    menuBar()->insertMenu( windowAction, myWindowPopup );
-  }
-  else
-  {
-    myIsDocuments = false;
-    myCasCadeBar->hide();
-    menuBar()->removeAction( myWindowPopup->menuAction() );
   }
 }
 

samples/qt/Common/src/MDIWindow.cxx

@@ -106,7 +106,8 @@ void MDIWindow::onWindowActivated ()
 void MDIWindow::dump()
 {
   QString datadir = (QString(qgetenv ("CSF_OCCTDataPath").constData()) + "/images");
-  QString filter = "Images Files (*.bmp *.ppm *.png *.jpg *.tiff *.tga *.gif *.exr)";
+  static QString filter;
+  filter = "Images Files (*.bmp *.ppm *.png *.jpg *.tiff *.tga *.gif *.exr *.ps *.eps *.tex *.pdf *.svg *.pgf)";
   QFileDialog fd ( 0 );
   fd.setModal( true );
   fd.setNameFilter ( filter );
@@ -134,7 +135,7 @@ void MDIWindow::dump()
     if ( !res )
     {
       QWidgetList list = qApp->allWidgets();
-      QWidget* mainWidget = NULL;
+      QWidget* mainWidget;
       for( int i = 0; i < list.size(); ++i )
       {
         if( qobject_cast<ApplicationCommonWindow*>( list.at( i ) ) )

samples/qt/Common/src/View.cxx

@@ -1034,6 +1034,33 @@ void View::onEnvironmentMap()
 
 bool View::dump(Standard_CString theFile)
 {
+  myView->Redraw();
+  QString ext = QFileInfo( QString( theFile ) ).completeSuffix();
+  if ( !ext.compare("ps") || !ext.compare("eps") || !ext.compare("tex") || !ext.compare("pdf") || !ext.compare("svg") || !ext.compare("pgf") )
+  {
+    Graphic3d_ExportFormat exFormat;
+    if ( !ext.compare("ps") )
+      exFormat = Graphic3d_EF_PostScript;
+    if ( !ext.compare("eps") )
+      exFormat = Graphic3d_EF_EnhPostScript;
+    if ( !ext.compare("tex") )
+      exFormat = Graphic3d_EF_TEX;
+    if ( !ext.compare("pdf") )
+      exFormat = Graphic3d_EF_PDF;
+    if ( !ext.compare("svg") )
+      exFormat = Graphic3d_EF_SVG;
+    if ( !ext.compare("pgf") )
+      exFormat = Graphic3d_EF_PGF;
+    try
+    {
+      myView->Export( theFile, exFormat );
+    }
+    catch(...)
+    {
+      return false;
+    }
+    return true;
+  }
   return myView->Dump(theFile);
 }
 

samples/qt/FuncDemo/env.sh

@@ -3,24 +3,19 @@
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
 if [ -e "custom.sh" ]; then
-  source "custom.sh" $*;
+   source "custom.sh";
 fi
 
 if [ -e "${aSamplePath}/../../../env.sh" ]; then
-  source "${aSamplePath}/../../../env.sh" $*;
+   source "${aSamplePath}/../../../env.sh";
 fi
 
-if [ "${QTDIR}" != "" ]; then
-  export PATH=${QTDIR}/bin:${PATH}
-else
-  aQMakePath=`which qmake`
-  echo "Environment variable \"QTDIR\" not defined.. Define it in \"custom.sh\" script."
-  if [ -x "$aQMakePath" ]; then
-    echo "qmake from PATH will be used instead."
-  else
-    exit 1
-  fi
+if test "${QTDIR}" == ""; then
+   echo "Environment variable \"QTDIR\" not defined. Define it in \"custom.sh\" script."
+   exit 1
 fi
 
 host=`uname -s`
 export STATION=$host
+
+export PATH=${QTDIR}/bin:${PATH}

samples/qt/FuncDemo/make.sh

@@ -1,14 +1,13 @@
 #!/bin/bash
 
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh" $*; fi
+if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh"; fi
 cd $aSamplePath
 qmake FuncDemo.pro
 if [ "$(uname -s)" != "Darwin" ] || [ "$MACOSX_USE_GLX" == "true" ]; then
-  aNbJobs="$(getconf _NPROCESSORS_ONLN)"
   if [ "${CASDEB}" == "d" ]; then
-    make -j $aNbJobs debug
+    make debug
   else
-    make -j $aNbJobs release
+    make release
   fi
 fi

samples/qt/FuncDemo/run.sh

@@ -2,7 +2,7 @@
 
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
-if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh" $*; fi
+if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh"; fi
 cd $aSamplePath
 
 aSystem=`uname -s`

samples/qt/FuncDemo/src/BaseDriver.cpp

@@ -51,7 +51,7 @@ void BaseDriver::Results(TDF_LabelList& res) const
 }
 
 // Execution.
-Standard_Integer BaseDriver::Execute(Handle(TFunction_Logbook)& ) const
+Standard_Integer BaseDriver::Execute(Handle(TFunction_Logbook)& log) const
 {
 #ifdef SLOW
     // Make a boolean operation to slow down the function

samples/qt/FuncDemo/src/SimpleDriver.cpp

@@ -59,7 +59,7 @@ void SimpleDriver::Results(TDF_LabelList& res) const
 }
 
 // Execution.
-Standard_Integer SimpleDriver::Execute(Handle(TFunction_Logbook)& ) const
+Standard_Integer SimpleDriver::Execute(Handle(TFunction_Logbook)& log) const
 {
 	// Check initialization
 	if (Label().IsNull())

samples/qt/IESample/env.sh

@@ -3,25 +3,20 @@
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
 if [ -e "custom.sh" ]; then
-  source "custom.sh" $*;
+   source "custom.sh";
 fi
 
 if [ -e "${aSamplePath}/../../../env.sh" ]; then
-  source "${aSamplePath}/../../../env.sh" $*;
+   source "${aSamplePath}/../../../env.sh";
 fi
 
-if [ "${QTDIR}" != "" ]; then
-  export PATH=${QTDIR}/bin:${PATH}
-else
-  aQMakePath=`which qmake`
-  echo "Environment variable \"QTDIR\" not defined.. Define it in \"custom.sh\" script."
-  if [ -x "$aQMakePath" ]; then
-    echo "qmake from PATH will be used instead."
-  else
-    exit 1
-  fi
+if test "${QTDIR}" == ""; then
+   echo "Environment variable \"QTDIR\" not defined. Define it in \"custom.sh\" script."
+   exit 1
 fi
 
 host=`uname -s`
 export STATION=$host
 export RES_DIR=${aSamplePath}/${STATION}/res
+
+export PATH=${QTDIR}/bin:${PATH}

samples/qt/IESample/make.sh

@@ -1,14 +1,13 @@
 #!/bin/bash
 
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh" $*; fi
+if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh"; fi
 cd $aSamplePath
 qmake IESample.pro
 if [ "$(uname -s)" != "Darwin" ] || [ "$MACOSX_USE_GLX" == "true" ]; then
-  aNbJobs="$(getconf _NPROCESSORS_ONLN)"
   if [ "${CASDEB}" == "d" ]; then
-    make -j $aNbJobs debug
+    make debug
   else
-    make -j $aNbJobs release
+    make release
   fi
 fi

samples/qt/IESample/run.sh

@@ -2,7 +2,7 @@
 
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
-if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh" $*; fi
+if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh"; fi
 cd $aSamplePath
 
 aSystem=`uname -s`

samples/qt/Interface/src/Translate.cxx

@@ -245,19 +245,30 @@ bool Translate::exportModel( const int format, const Handle(AIS_InteractiveConte
 
 bool Translate::exportModel( const int format, const QString& file, const Handle(TopTools_HSequenceOfShape)& shapes )
 {
+    bool status;
     try {
         switch ( format )
         {
-        case FormatBREP: return exportBREP( file, shapes );
-        case FormatIGES: return exportIGES( file, shapes );
-        case FormatSTEP: return exportSTEP( file, shapes );
-        case FormatSTL:  return exportSTL ( file, shapes );
-        case FormatVRML: return exportVRML( file, shapes );
+        case FormatBREP:
+            status = exportBREP( file, shapes );
+            break;
+        case FormatIGES:
+            status = exportIGES( file, shapes );
+            break;
+        case FormatSTEP:
+            status = exportSTEP( file, shapes );
+            break;
+        case FormatSTL:
+            status = exportSTL( file, shapes );
+            break;
+        case FormatVRML:
+            status = exportVRML( file, shapes );
+            break;
         }
     } catch ( Standard_Failure ) {
-        //
+        status = false;
     }
-    return false;
+    return status;
 }
 
 Handle(TopTools_HSequenceOfShape) Translate::getShapes( const Handle(AIS_InteractiveContext)& ic )
@@ -511,9 +522,6 @@ bool Translate::exportSTEP( const QString& file, const Handle(TopTools_HSequence
     case IFSelect_RetVoid:
         myInfo = QObject::tr( "INF_NOTHING_ERROR" );
         break;
-    case IFSelect_RetStop:
-    case IFSelect_RetDone:
-        break;
     }
     return status == IFSelect_RetDone;
 }

samples/qt/Tutorial/env.sh

@@ -3,25 +3,20 @@
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
 if [ -e "custom.sh" ]; then
-  source "custom.sh" $*;
+   source "custom.sh";
 fi
 
 if [ -e "${aSamplePath}/../../../env.sh" ]; then
-  source "${aSamplePath}/../../../env.sh" $*;
+   source "${aSamplePath}/../../../env.sh";
 fi
 
-if [ "${QTDIR}" != "" ]; then
-  export PATH=${QTDIR}/bin:${PATH}
-else
-  aQMakePath=`which qmake`
-  echo "Environment variable \"QTDIR\" not defined.. Define it in \"custom.sh\" script."
-  if [ -x "$aQMakePath" ]; then
-    echo "qmake from PATH will be used instead."
-  else
-    exit 1
-  fi
+if test "${QTDIR}" == ""; then
+   echo "Environment variable \"QTDIR\" not defined. Define it in \"custom.sh\" script."
+   exit 1
 fi
 
 host=`uname -s`
 export STATION=$host
 export RES_DIR=${aSamplePath}/${STATION}/res
+
+export PATH=${QTDIR}/bin:${PATH}

samples/qt/Tutorial/make.sh

@@ -1,14 +1,13 @@
 #!/bin/bash
 
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh" $*; fi
+if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh"; fi
 cd $aSamplePath
 qmake Tutorial.pro
 if [ "$(uname -s)" != "Darwin" ] || [ "$MACOSX_USE_GLX" == "true" ]; then
-  aNbJobs="$(getconf _NPROCESSORS_ONLN)"
   if [ "${CASDEB}" == "d" ]; then
-    make -j $aNbJobs debug
+    make debug
   else
-    make -j $aNbJobs release
+    make release
   fi
 fi

samples/qt/Tutorial/run.sh

@@ -2,7 +2,7 @@
 
 export aSamplePath="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
-if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh" $*; fi
+if [ -e "${aSamplePath}/env.sh" ]; then source "${aSamplePath}/env.sh"; fi
 cd $aSamplePath
 
 aSystem=`uname -s`

samples/tools/TInspectorEXE/TInspectorEXE.cxx

@@ -14,11 +14,9 @@
 // commercial license or contractual agreement. 
 
 
-#include <TInspectorEXE_OpenFileDialog.hxx>
-
-#include <inspector/TInspector_Communicator.hxx>
-
 #include <OSD_Environment.hxx>
+#include <TInspectorEXE_OpenFileDialog.hxx>
+#include <TInspector_Communicator.hxx>
 
 #include <QAction>
 #include <QApplication>
@@ -88,13 +86,13 @@ int main (int argc, char** argv)
   std::set<TCollection_AsciiString> aPlugins;
   for (int anArgId = 1; anArgId < argc; anArgId++ )
   {
-    if (!strcmp (argv[anArgId], "dfbrowser"))
+    if (!strcmp (argv[anArgId], "--dfbrowser"))
       aPlugins.insert ("TKDFBrowser");
 
-    if (!strcmp (argv[anArgId], "shapeview"))
+    if (!strcmp (argv[anArgId], "--shapeview"))
       aPlugins.insert ("TKShapeView");
 
-    if (!strcmp (argv[anArgId], "vinspector"))
+    if (!strcmp (argv[anArgId], "--vinspector"))
       aPlugins.insert ("TKVInspector");
   }
   NCollection_List<Handle(Standard_Transient)> aParameters;