0023675: P-curves of a face are out of the domain of the face.

Analyzing of 2D-curves' boundaries.
Tolerance range computing was changed.

1. Function Validate(...) returns BRepCheck_Status.
2. For faces, whose pcurves is out of domain, status BRepCheck_OutOfSurfaceBoundary is returned.
3. For edges, which is out of face's boundary, status BRepCheck_PCurveIsOutOfDomainFace is returned.
4. Print warning, if status is not defined.
5. BRepCheck_Face::SetStatus(...) and BRepCheck_Wire::SetStatus(...) functions added.
6. ShapeFix::RefineFace(...) function and it draw-commands (ffixpcu and sfixpcu) are added. Command "ffixpcu" fixes a face with BRepCheck_OutOfSurfaceBoundary status. Command "sfixpcu" fixes a shape, which contains a face with BRepCheck_OutOfSurfaceBoundary status.
7. Trimming algorithm for surfaces changed (ForceTrim method is added).
8. Small correction of output of "checkshape" command result.
9. MinMax() and RealMod() functions are added.
10. Fixing of some shapes from test base.

Faces, which based on periodic or closed surfaces, are not controlled.

.gitattributes

@@ -36,7 +36,6 @@
 *.rle       eol=lf
 *.vrml      eol=lf
 *.md        eol=lf
-*.natvis    eol=lf
 FILES       eol=lf
 PACKAGES    eol=lf
 EXTERNLIB   eol=lf

adm/UDLIST

@@ -133,7 +133,9 @@ p FairCurve
 p FilletSurf
 p GccAna
 p GccEnt
+p GccGeo
 p GccInt
+p GccIter
 p Geom2dAPI
 p Geom2dGcc
 p Geom2dHatch

adm/gendoc.tcl

@@ -1,825 +0,0 @@
-# =======================================================================
-# Created on: 2014-03-21
-# Created by: OMY
-# Copyright (c) 1996-1999 Matra Datavision
-# Copyright (c) 1999-2014 OPEN CASCADE SAS
-#
-# This file is part of Open CASCADE Technology software library.
-#
-# This library is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Lesser General Public License version 2.1 as published
-# by the Free Software Foundation, with special exception defined in the file
-# OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
-# distribution for complete text of the license and disclaimer of any warranty.
-#
-# Alternatively, this file may be used under the terms of Open CASCADE
-# commercial license or contractual agreement.
-# 
-# Brief:  This script compiles OCCT documents from *.md files to HTML pages
-# =======================================================================
-
-# ======================================
-#  Common functions
-# ======================================
-
-# Prints help message
-proc OCCDoc_PrintHelpMessage {} {
-    puts "\nUsage: gendoc \[-h\] {-refman|-overview} \[-html|-pdf|-chm\] \[-m=<list of modules>|-ug=<list of docs>\] \[-v\] \[-s=<search_mode>\] \[-mathjax=<path>\]"
-    puts ""
-    puts "Options are:"
-    puts ""
-    puts "choice of documentation to be generated:"
-    puts "  -overview          : To generate Overview and User Guides"
-    puts "                       (cannot be used with -refman)"
-    puts "  -refman            : To generate class Reference Manual"
-    puts "                       (cannot be used with -overview)"
-    puts ""
-    puts "choice of output format:"
-    puts "  -html              : To generate HTML files"
-    puts "                       (default, cannot be used with -pdf or -chm)"
-    puts "  -pdf               : To generate PDF files"
-    puts "                       (cannot be used with -refman, -html, or -chm)"
-    puts "  -chm               : To generate CHM files"
-    puts "                       (cannot be used with -html or -pdf)"
-    puts ""
-    puts "additional options:"
-    puts "  -m=<modules_list>  : List of OCCT modules (separated with comma),"
-    puts "                       for generation of Reference Manual"
-    puts "  -ug=<docs_list>    : List of MarkDown documents (separated with comma),"
-    puts "                       to use for generation of Overview / User Guides"
-    puts "  -mathjax=<path>    : To use local or alternative copy of MathJax"
-    puts "  -s=<search_mode>   : Specifies the Search mode of HTML documents"
-    puts "                       Can be: none | local | server | external"
-    puts "  -h                 : Prints this help message"
-    puts "  -v                 : Enables more verbose output"    
-}
-
-# A command for User Documentation compilation
-proc gendoc {args} {
-
-  # Parameters
-  set DOC_TYPE                  "REFMAN"
-  set GEN_MODE                  "HTML_ONLY"
-  set DOCFILES                  {}
-  set MODULES                   {}
-  set DOCLABEL                  ""
-  set VERB_MODE                 "NO"
-  set SEARCH_MODE               "none"
-  set MATHJAX_LOCATION          "http://cdn.mathjax.org/mathjax/latest"
-  set mathjax_js_name           "MathJax.js"
-  set DOCTYPE_COMBO_FLAG        0
-  set GENMODE_COMBO_FLAG        0
-  set GENERATE_PRODUCTS_REFMAN "NO"
-
-  global available_docfiles;   # The full list of md files for HTML or CHM generation
-  global available_pdf;        # The full list of md files for PDF generation
-  global tcl_platform
-  global args_names
-  global args_values
-  global env
-
-  # Load list of docfiles
-  if { [OCCDoc_LoadFilesList] != 0 } {
-    puts "Error: File FILES_HTML.txt or FILES_PDF.txt was not found on this computer.\nAborting..."
-    return -1
-  }
-
-  # Parse CL arguments
-  if {[OCCDoc_ParseArguments $args] == 1} {
-    return -1
-  }
-
-  # Print help message if no arguments provided
-  if {[llength $args_names] == 0} {
-    OCCDoc_PrintHelpMessage
-    return 0
-  }
-
-  foreach arg_n $args_names {
-    if {$arg_n == "h"} {
-      OCCDoc_PrintHelpMessage
-      return 0
-    } elseif {$arg_n == "html"} {
-      if { ([ lsearch $args_names "refman" ]   == -1) &&
-           ([ lsearch $args_names "overview" ] == -1) } {
-        puts "Warning: Please specify -refman or -overview argument."
-        return -1
-      }
-      if { [ lsearch $args_names "refman" ] != -1 } {
-        continue
-      }
-      if { $GENMODE_COMBO_FLAG != 1 } {
-        set GEN_MODE "HTML_ONLY"
-        set GENMODE_COMBO_FLAG 1
-      } else {
-        puts "Error: Options -html, -pdf and -chm can not be combined."
-        return -1
-      }
-    } elseif {$arg_n == "chm"} {
-      if { ([ lsearch $args_names "refman" ]   == -1) &&
-           ([ lsearch $args_names "overview" ] == -1) } {
-        puts "Warning: Please specify -refman or -overview argument."
-        return -1
-      }
-      if { [ lsearch $args_names "refman" ] != -1 } {
-        continue
-      }
-      if { $GENMODE_COMBO_FLAG != 1 } { 
-        set GEN_MODE "CHM_ONLY"
-        set GENMODE_COMBO_FLAG 1
-      } else {
-        puts "Error: Options -html, -pdf and -chm cannot be combined."
-        return -1
-      }
-    } elseif {$arg_n == "pdf"} {
-      if { ([ lsearch $args_names "refman" ]   == -1) &&
-           ([ lsearch $args_names "overview" ] == -1) } {
-        puts "Warning: Please specify -refman or -overview argument."
-        return -1
-      }
-      if { [ lsearch $args_names "refman" ] != -1 } {
-        continue
-      }
-      if { $GENMODE_COMBO_FLAG != 1 } { 
-        set GEN_MODE "PDF_ONLY"
-        set GENMODE_COMBO_FLAG 1
-      } else {
-        puts "Error: Options -html, -pdf and -chm cannot be combined."
-        return -1
-      }
-    } elseif {$arg_n == "overview"} {
-      if { $DOCTYPE_COMBO_FLAG != 1 } {
-        set DOC_TYPE "OVERVIEW"
-        set DOCTYPE_COMBO_FLAG 1
-      } else {
-        puts "Error: Options -refman and -overview cannot be combined."
-        return -1
-      }
-
-      # Print ignored options
-      if { [ lsearch $args_names "m" ] != -1 } {
-        puts "\nInfo: The following options will be ignored: \n"
-        puts "  * -m"
-      }
-      puts ""
-    } elseif {$arg_n == "refman"} {
-      if { $DOCTYPE_COMBO_FLAG != 1 } { 
-        set DOC_TYPE "REFMAN"
-        set DOCTYPE_COMBO_FLAG 1
-        if { [file exists [pwd]/src/VAS/Products.tcl] } {
-          set GENERATE_PRODUCTS_REFMAN "YES"
-        }
-      } else {
-        puts "Error: Options -refman and -overview cannot be combined."
-        return -1
-      }
-      # Print ignored options
-      if { ([ lsearch $args_names "pdf" ]     != -1) || 
-           ([ lsearch $args_names "chm" ]     != -1) || 
-           ([ lsearch $args_names "ug" ]      != -1) } {
-        puts "\nInfo: The following options will be ignored: \n"
-        if { [ lsearch $args_names "pdf" ] != -1 } {
-          puts "  * -pdf"
-        }
-        if { [ lsearch $args_names "chm" ] != -1 } {
-          puts "  * -chm"
-        }
-        if { [ lsearch $args_names "ug" ] != -1 } {
-          puts "  * -ug"
-        }
-        puts ""
-      }
-      
-      if { $GENERATE_PRODUCTS_REFMAN == "YES" } {
-        if { [ lsearch $args_names "m" ] == -1 } {
-          puts "\nError: Cannot generate Reference Manual for the whole set of OCC Products."
-          puts "Aborting..."
-          return -1
-        }
-      }
-    } elseif {$arg_n == "v"} {
-      set VERB_MODE "YES"
-    } elseif {$arg_n == "ug"} {
-      if { ([ lsearch $args_names "refman" ]   != -1) } {
-        continue
-      }
-      if {$args_values(ug) != "NULL"} {
-        set DOCFILES $args_values(ug)
-      } else {
-        puts "Error in argument ug."
-        return -1
-      }
-      # Check if all chosen docfiles are correct
-      foreach docfile $DOCFILES {
-        if { [ lsearch $args_names "pdf" ] == -1 } {
-          # Check to generate HTMLs
-          if { [lsearch $available_docfiles $docfile] == -1 } {
-            puts "Error: File \"$docfile\" is not presented in the list of available docfiles."
-            puts "       Please specify the correct docfile name."
-            return -1
-          } 
-        } else {
-          # Check to generate PDFs
-          if { [lsearch $available_pdf $docfile] == -1 } {
-            puts "Error: File \"$docfile\" is not presented in the list of generic PDFs."
-            puts "       Please specify the correct pdf name."
-            return -1
-          }
-        }
-      }
-    } elseif {$arg_n == "m"} {
-      if { [ lsearch $args_names "overview" ] != -1 } {
-        continue
-      }
-      if {$args_values(m) != "NULL"} {
-        set MODULES $args_values(m)
-      } else {
-        puts "Error in argument m."
-        return -1
-      }
-    } elseif {$arg_n == "s"} {
-      if { [ lsearch $args_names "pdf" ] != -1 } {
-        continue
-      }
-      if {$args_values(s) != "NULL"} {
-        set SEARCH_MODE $args_values(s)
-      } else {
-        puts "Error in argument s."
-        return -1
-      }
-    } elseif {$arg_n == "mathjax"} {
-      if { [ lsearch $args_names "pdf" ] != -1 } {
-        set possible_mathjax_loc $args_values(mathjax)
-        if {[file exist [file join $possible_mathjax_loc $mathjax_js_name]]} {
-          set MATHJAX_LOCATION $args_values(mathjax)
-          puts "$MATHJAX_LOCATION"
-        } else {
-          puts "Warning: $mathjax_js_name is not found in $possible_mathjax_loc."
-          puts "         MathJax will be used from $MATHJAX_LOCATION"
-        }
-      } else {
-        puts "Warning: MathJax is not used with pdf and will be ignored."
-      }
-    } else {
-      puts "\nWrong argument: $arg_n"
-      OCCDoc_PrintHelpMessage
-      return -1
-    }
-  }
-
-  # Check the existence of the necessary tools
-  set DOXYGEN_PATH  ""
-  set GRAPHVIZ_PATH ""
-  set INKSCAPE_PATH ""
-  set PDFLATEX_PATH ""
-  set HHC_PATH      ""
-
-  OCCDoc_DetectNecessarySoftware $DOXYGEN_PATH $GRAPHVIZ_PATH $INKSCAPE_PATH $HHC_PATH $PDFLATEX_PATH
-
-  if {$DOXYGEN_PATH == ""} {
-    puts " Aborting..."
-    return -1
-  }
-
-  if {"$::tcl_platform(platform)" == "windows"} {
-    if { ($GEN_MODE == "CHM_ONLY") && ($HHC_PATH == "") } {
-      puts " Aborting..."
-      return -1
-    }
-  }
-
-  if { ($PDFLATEX_PATH == "") && ($GEN_MODE == "PDF_ONLY") } {
-    puts " Aborting..."
-    return -1
-  }
-
-  # If we do not specify list for docfiles with -m argument,
-  # we assume that we have to generate all docfiles
-  if { [llength $DOCFILES] == 0 } {
-    if { $GEN_MODE != "PDF_ONLY" } {
-      set DOCFILES $available_docfiles
-    } else {
-      set DOCFILES $available_pdf
-    }
-  }
-
-  puts ""
-
-  # Clean logfiles
-  set OUTDIR  [OCCDoc_GetRootDir]/doc/
-  set DOXYLOG $OUTDIR/doxygen_warnings_and_errors.log
-  set PDFLOG  $OUTDIR/pdflatex_warnings_and_errors.log
-
-  file delete -force $PDFLOG
-  file delete -force $DOXYLOG
-  
-  # Start main activities
-  if { $GEN_MODE != "PDF_ONLY" } {
-    OCCDoc_Main $DOC_TYPE $DOCFILES $MODULES $GEN_MODE $VERB_MODE $SEARCH_MODE $MATHJAX_LOCATION $GENERATE_PRODUCTS_REFMAN $DOXYGEN_PATH $GRAPHVIZ_PATH $INKSCAPE_PATH $HHC_PATH
-  } else {
-    puts "Generating OCCT User Guides in PDF format...\n"
-    foreach pdf $DOCFILES {
-
-      puts "Info: Processing file $pdf\n"
-
-      # Some values are hardcoded because they are related only to PDF generation
-      OCCDoc_Main "OVERVIEW" [list $pdf] {} "PDF_ONLY" $VERB_MODE "none" $MATHJAX_LOCATION "NO" $DOXYGEN_PATH $GRAPHVIZ_PATH $INKSCAPE_PATH $HHC_PATH
-    }
-    puts "[clock format [clock seconds] -format {%Y-%m-%d %H:%M}] Generation completed."
-    puts "\nPDF files are generated in \n[file normalize [OCCDoc_GetRootDir]/doc/pdf]"
-  }
-}
-
-# Main procedure for documents compilation
-proc OCCDoc_Main {docType {docfiles {}} {modules {}} generatorMode verboseMode searchMode mathjaxLocation generateProductsRefman DOXYGEN_PATH GRAPHVIZ_PATH INKSCAPE_PATH HHC_PATH} {
-
-  global available_docfiles
-  global available_pdf
-
-  set PRODPATH   ""
-  if { [string compare -nocase $generateProductsRefman "YES"] == 0 } {
-    set PRODPATH [pwd]
-  }
-
-  set ROOTDIR    [OCCDoc_GetRootDir $PRODPATH]
-  set INDIR      [OCCDoc_GetDoxDir]
-  set OUTDIR     $ROOTDIR/doc
-  set PDFDIR     $OUTDIR/pdf
-  set UGDIR      $PDFDIR/user_guides
-  set DGDIR      $PDFDIR/dev_guides
-  set TAGFILEDIR $OUTDIR/refman
-  set HTMLDIR    $OUTDIR/overview/html
-  set LATEXDIR   $OUTDIR/overview/latex
-  set DOXYFILE   $OUTDIR/OCCT.cfg
-
-  # Create or cleanup the output folders
-  if { [string compare -nocase $generateProductsRefman "YES"] != 0 } {
-    if { ![file exists $OUTDIR] } {
-      file mkdir $OUTDIR
-    } 
-    if { ![file exists $HTMLDIR] } {
-      file mkdir $HTMLDIR
-    }
-    if { ![file exists $PDFDIR] } {
-      file mkdir $PDFDIR
-    }
-    if { ![file exists $UGDIR] } {
-      file mkdir $UGDIR
-    }
-    if { ![file exists $DGDIR] } {
-      file mkdir $DGDIR
-    }
-    if { [file exists $LATEXDIR] } {
-      file delete -force $LATEXDIR
-    }
-    file mkdir $LATEXDIR
-  }
-  if { $docType == "REFMAN" } {
-    if { ![file exists $TAGFILEDIR] } {
-      file mkdir $TAGFILEDIR
-    }
-  }
-
-  # is MathJax HLink?
-  set mathjax_relative_location $mathjaxLocation
-  if { [file isdirectory "$mathjaxLocation"] } {
-    if { $generatorMode == "HTML_ONLY" } {
-      # related path
-      set mathjax_relative_location [OCCDoc_GetRelPath $HTMLDIR $mathjaxLocation]
-    } elseif { $generatorMode == "CHM_ONLY" } {
-      # absolute path
-      set mathjax_relative_location [file normalize $mathjaxLocation]
-    }
-  }
-
-  if { $generateProductsRefman == "YES" } {
-    set DOCDIR "$OUTDIR/refman"
-    puts "\nGenerating OCC Products Reference Manual\n"
-  } else {
-    if { $docType == "REFMAN"} {
-      set DOCDIR "$OUTDIR/refman"
-      puts "\nGenerating Open CASCADE Reference Manual\n"
-    } elseif { $docType == "OVERVIEW" } {
-      set DOCDIR "$OUTDIR/overview"
-      set FORMAT ""
-      if { ($generatorMode == "HTML_ONLY") || ($generatorMode == "CHM_ONLY") } {
-        if { $generatorMode == "HTML_ONLY" } { 
-          set FORMAT " in HTML format..."
-        } elseif { $generatorMode == "CHM_ONLY" } {
-          set FORMAT " in CHM format..."
-        }
-        puts "Generating OCCT User Guides$FORMAT\n"
-      }
-    } else {
-      puts "Error: Invalid documentation type: $docType. Can not process."
-      return -1
-    }
-  }
-
-  # Generate Doxyfile
-  puts "[clock format [clock seconds] -format {%Y-%m-%d %H:%M}] Generating Doxyfile..."
-
-  if { [OCCDoc_MakeDoxyfile $docType $DOCDIR $TAGFILEDIR $DOXYFILE $generatorMode $docfiles $modules $verboseMode $searchMode $HHC_PATH $mathjax_relative_location $GRAPHVIZ_PATH $PRODPATH] == -1 } {
-    return -1
-  }
-
-  # Run doxygen tool
-  set starttimestamp [clock format [clock seconds] -format {%Y-%m-%d %H:%M}]
-
-  if { ($generatorMode == "HTML_ONLY") || ($docType == "REFMAN") } {
-    puts "$starttimestamp Generating HTML files..."
-
-    # Copy index file to provide fast access to HTML documentation
-    file copy -force $INDIR/resources/index.html $DOCDIR/index.html
-  } elseif { $generatorMode == "CHM_ONLY" } {
-    puts "$starttimestamp Generating CHM file..."
-  } elseif { $generatorMode == "PDF_ONLY" } {
-    puts "$starttimestamp Generating PDF file..."
-  }
-
-  set DOXYLOG $OUTDIR/doxygen_warnings_and_errors.log
-  set RESULT [catch {exec $DOXYGEN_PATH $DOXYFILE >> $OUTDIR/doxygen_out.log} DOX_ERROR] 
-  if {$RESULT != 0} {
-    set NbErrors [regexp -all -line {^\s*[^\s]+} $DOX_ERROR]
-    if {$NbErrors > 0} {
-      puts "\nWarning: Doxygen reported $NbErrors messages."
-      puts "See log in $DOXYLOG\n"
-      set DOX_ERROR_FILE [open $DOXYLOG "a"]
-      if {$generatorMode == "PDF_ONLY"} {
-        puts $DOX_ERROR_FILE "\n===================================================="
-        puts $DOX_ERROR_FILE "Logfile for $docfiles"
-        puts $DOX_ERROR_FILE "====================================================\n"
-      }
-      puts $DOX_ERROR_FILE $DOX_ERROR
-      close $DOX_ERROR_FILE
-    }
-  }
-
-  # Close the Doxygen application
-  after 300
-
-  # Start Post Processing
-  set curtime [clock format [clock seconds] -format {%Y-%m-%d %H:%M}]
-  if { $docType == "REFMAN" } {
-    # Post Process generated HTML pages and draw dependency graphs
-    if {[OCCDoc_PostProcessor $DOCDIR] == 0} {
-      puts "$curtime Generation completed."
-      puts "\nInfo: doxygen log file is located in:"
-      puts "$OUTDIR/doxygen_out.log."
-      puts "\nReference Manual is generated in \n$DOCDIR"
-    }
-  } elseif { $docType == "OVERVIEW" } {
-    # Start PDF generation routine
-    if { $generatorMode == "PDF_ONLY" } {
-      set OS $::tcl_platform(platform)
-      if { $OS == "unix" } {
-        set PREFIX ".sh"
-      } elseif { $OS == "windows" } {
-        set PREFIX ".bat"
-      }
-
-      # Prepare a list of TeX files, generated by Doxygen
-      cd $LATEXDIR
-
-      set TEXFILES   [glob $LATEXDIR -type f -directory $LATEXDIR -tails "*.tex" ]
-      foreach path $TEXFILES {
-        if { [string compare -nocase $path $LATEXDIR] == 0 } {
-          set DEL_IDX [lsearch $TEXFILES $path]
-          if { $DEL_IDX != -1 } {
-            set TEXFILES [lreplace $TEXFILES $DEL_IDX $DEL_IDX]
-          }
-        }
-      }
-      set TEXFILES   [string map [list refman.tex ""] $TEXFILES]
-      if {$verboseMode == "YES"} {
-        puts "Info: Preprocessing generated TeX files..."
-      }
-      OCCDoc_ProcessTex $TEXFILES $LATEXDIR $verboseMode
-
-      if {$verboseMode == "YES"} {
-        puts "Info: Converting SVG images to PNG format..."
-      }
-
-      if { $INKSCAPE_PATH != "" } {
-        OCCDoc_ProcessSvg $LATEXDIR $verboseMode
-      } else {
-        puts "Warning: SVG images will be lost in PDF documents."
-      }
-
-      if {$verboseMode == "YES"} {
-        puts "Info: Generating PDF file from TeX files..."
-      }
-      foreach TEX $TEXFILES {
-        # Rewrite existing REFMAN.tex file...
-        set TEX [lindex [split $TEX "."] 0]
-
-        if {$verboseMode == "YES"} {
-          puts "Info: Generating PDF file from $TEX..."
-        }
-
-        OCCDoc_MakeRefmanTex $TEX $LATEXDIR $verboseMode $available_pdf
-
-        if {"$::tcl_platform(platform)" == "windows"} {
-          set is_win "yes"
-        } else {
-          set is_win "no"
-        }
-        if {$verboseMode == "YES"} {
-          # ...and use it to generate PDF from TeX...
-          if {$is_win == "yes"} {
-            puts "Info: Executing $LATEXDIR/make.bat..."
-          } else {
-            puts "Info: Executing $LATEXDIR/Makefile..."
-          }
-        }
-        set PDFLOG $OUTDIR/pdflatex_warnings_and_errors.log
-
-        if {"$is_win" == "yes"} {
-          set RESULT [catch {eval exec [auto_execok $LATEXDIR/make.bat] >> "$OUTDIR/pdflatex_out.log"} LaTeX_ERROR]
-        } else {
-          set RESULT [catch {eval exec "make -f $LATEXDIR/Makefile" >> "$OUTDIR/pdflatex_out.log"} LaTeX_ERROR]
-
-          # Small workaround for *nix stations
-          set prev_loc [pwd]
-          cd $LATEXDIR
-          set RESULT [catch {eval exec "pdflatex refman.tex" >> "$OUTDIR/pdflatex_out.log"} LaTeX_ERROR]
-          cd $prev_loc
-        }
-
-        if {$RESULT != 0} {
-          set NbErrors [regexp -all -line {^\s*[^\s]+} $LaTeX_ERROR]
-          if {$NbErrors > 0} {
-            puts "\nWarning: PDFLaTeX reported $NbErrors messages.\nSee log in $PDFLOG\n"
-            set LaTeX_ERROR_FILE [open $PDFLOG "a"]
-            puts $LaTeX_ERROR_FILE "\n===================================================="
-            puts $LaTeX_ERROR_FILE "Logfile of file $TEX:"
-            puts $LaTeX_ERROR_FILE "====================================================\n"
-            puts $LaTeX_ERROR_FILE $LaTeX_ERROR
-            close $LaTeX_ERROR_FILE
-          }
-        }
-
-        # ...and place it to the specific folder
-        if {![file exists "$LATEXDIR/refman.pdf"]} {
-          puts "Fatal: PDFLaTeX failed to create output file, stopping!"
-          return -1
-        }
-
-        set destFolder $PDFDIR
-        set parsed_string [split $TEX "_"]
-        if { [lsearch $parsed_string "tutorial"] != -1 } {
-          set TEX [string map [list occt__ occt_] $TEX]
-          set destFolder $PDFDIR
-        } elseif { [lsearch $parsed_string "user"] != -1 } {
-          set TEX [string map [list user_guides__ ""] $TEX]
-          set destFolder $UGDIR
-        } elseif { [lsearch $parsed_string "dev"]  != -1 } {
-          set TEX [string map [list dev_guides__ ""] $TEX]
-          set destFolder $DGDIR
-        }
-        file rename -force $LATEXDIR/refman.pdf "$destFolder/$TEX.pdf"
-
-      }
-    } elseif { $generatorMode == "CHM_ONLY" } {
-      file rename  $OUTDIR/overview.chm $OUTDIR/occt_overview.chm
-    }
-    cd $INDIR
-
-    if { $generatorMode == "HTML_ONLY" } {
-      puts "\nHTML documentation is generated in \n$DOCDIR"
-    }
-    if { $generatorMode == "CHM_ONLY" } {
-      puts "\nGenerated CHM documentation is in \n$OUTDIR/overview.chm"
-    }
-
-    puts ""
-  }
-
-  # Remove temporary Doxygen files
-  set deleteList [glob -nocomplain -type f "*.tmp"]
-  foreach file $deleteList {
-    file delete $file
-  }
-  return 0
-}
-
-# Generates Doxygen configuration file for Overview documentation
-proc OCCDoc_MakeDoxyfile {docType outDir tagFileDir {doxyFileName} {generatorMode ""} {DocFilesList {}} {ModulesList {}} verboseMode searchMode hhcPath mathjaxLocation graphvizPath productsPath} {
-
-  set inputDir      [OCCDoc_GetDoxDir]
-  set TEMPLATES_DIR $inputDir/resources
-  set occt_version  [OCCDoc_DetectCasVersion]
-
-  # Delete existent doxyfile
-  file delete $doxyFileName
-
-  # Copy specific template to the target folder
-  if { $docType == "REFMAN" } {
-    file copy "$TEMPLATES_DIR/occt_rm.doxyfile" $doxyFileName
-  } elseif { $docType == "OVERVIEW" } {
-    if { $generatorMode == "HTML_ONLY" || $generatorMode == "CHM_ONLY" } {
-      file copy "$TEMPLATES_DIR/occt_ug_html.doxyfile" $doxyFileName
-    } elseif { $generatorMode == "PDF_ONLY"} {
-      file copy "$TEMPLATES_DIR/occt_ug_pdf.doxyfile" $doxyFileName
-    } else {
-      puts "Error: Unknown generation mode"
-      return -1
-    }
-  } else {
-    puts "Error: Cannot generate unknown document type"
-    return -1
-  }
-
-  set doxyFile [open $doxyFileName "a"]
-  # Write specific options
-  if { $docType == "REFMAN" } {
-
-    # Load lists of modules scripts
-    if { $productsPath == "" } {
-      set modules_scripts [glob -nocomplain -type f -directory "[OCCDoc_GetSourceDir $productsPath]/OS/" *.tcl]
-    } else {
-      set modules_scripts [glob -nocomplain -type f -directory "[OCCDoc_GetSourceDir $productsPath]/VAS/" *.tcl]
-    }
-    if { [llength $modules_scripts] != 0} {
-      foreach module_file $modules_scripts {
-        source $module_file
-      }
-    }
-
-    set ALL_MODULES [OCCDoc_GetModulesList $productsPath]
-    if { [llength $ModulesList] == 0 } {
-      # by default take all modules
-      set modules $ALL_MODULES
-    } else {
-      set modules $ModulesList
-    }
-
-    # Detect invalid names of modules
-    foreach module $modules {
-      if { $module == "" } {
-        continue
-      }
-      if {[lsearch $ALL_MODULES $module] == -1 } {
-        puts "Error: No module $module is known. Aborting..."
-        return -1
-      }
-    }
-
-    # Set context
-    set one_module [expr [llength $modules] == 1]
-    if { $one_module } {
-      set title "OCCT [$modules:name]"
-      set name $modules
-    } else {
-      set title "Open CASCADE Technology"
-      set name OCCT
-    }
-
-    # Get list of header files in the specified modules
-    set filelist {}
-    foreach module $modules {
-      if { $module == "" } {
-        continue
-      }
-      foreach tk [$module:toolkits] {
-        foreach pk [split [OCCDoc_GetPackagesList [OCCDoc_Locate $tk $productsPath]]] {
-          if { [llength $pk] != "{}" } {
-            lappend filelist [OCCDoc_GetHeadersList "p" "pubinclude" "$pk" "$productsPath"]
-          }
-        }
-      }
-    }
-
-    # Filter out files Handle_*.hxx and *.lxx
-    set hdrlist {}
-    foreach fileset $filelist {
-      set hdrset {}
-      foreach hdr $fileset {
-        if { ! [regexp {Handle_.*[.]hxx} $hdr] && ! [regexp {.*[.]lxx} $hdr] } {
-          lappend hdrset $hdr
-        }
-      }
-      lappend hdrlist $hdrset
-    }
-    set filelist $hdrlist
-
-    set doxyFile [open $doxyFileName "a"]
-  
-    puts $doxyFile "PROJECT_NAME           = \"$title\""
-    puts $doxyFile "PROJECT_NUMBER         = $occt_version"
-    puts $doxyFile "OUTPUT_DIRECTORY       = $outDir/."
-    puts $doxyFile "GENERATE_TAGFILE       = $outDir/${name}.tag"
-
-    if { [string tolower $searchMode] == "none" } {
-      puts $doxyFile "SEARCHENGINE           = NO"
-      puts $doxyFile "SERVER_BASED_SEARCH    = NO"
-      puts $doxyFile "EXTERNAL_SEARCH        = NO"
-    } else {
-      puts $doxyFile "SEARCHENGINE           = YES"
-      if { [string tolower $searchMode] == "local" } {
-        puts $doxyFile "SERVER_BASED_SEARCH    = NO"
-        puts $doxyFile "EXTERNAL_SEARCH        = NO"
-      } elseif { [string tolower $searchMode] == "server" } {
-        puts $doxyFile "SERVER_BASED_SEARCH    = YES"
-        puts $doxyFile "EXTERNAL_SEARCH        = NO"
-      } elseif { [string tolower $searchMode] == "external" } {
-        puts $doxyFile "SERVER_BASED_SEARCH    = YES"
-        puts $doxyFile "EXTERNAL_SEARCH        = YES"
-      } else {
-        puts "Error: Wrong search engine type: $searchMode."
-        close $doxyFile 
-        return -1
-      }
-    }
-
-    puts $doxyFile "DOTFILE_DIRS             = $outDir/html"
-    puts $doxyFile "DOT_PATH                 = $graphvizPath"
-    puts $doxyFile "INCLUDE_PATH             = [OCCDoc_GetIncDir $productsPath]"
-    
-    # list of files to generate
-    set mainpage [OCCDoc_MakeMainPage $outDir $outDir/$name.dox $modules $productsPath]
-    puts $doxyFile ""
-    puts $doxyFile "INPUT    = $mainpage \\"
-    foreach header $filelist {
-      puts $doxyFile "               $header \\"
-    }
-
-    puts $doxyFile "MATHJAX_FORMAT         = HTML-CSS"
-    puts $doxyFile "MATHJAX_RELPATH        = ${mathjaxLocation}"
-
-    puts $doxyFile ""
-
-  } elseif { $docType == "OVERVIEW" } {
-
-    # Add common options for generation of Overview and User Guides
-    puts $doxyFile "PROJECT_NUMBER         = $occt_version"
-    puts $doxyFile "OUTPUT_DIRECTORY       = $outDir/."
-    puts $doxyFile "PROJECT_LOGO           = $inputDir/resources/occ_logo.png"
-
-    set PARAM_INPUT "INPUT                 ="
-    set PARAM_IMAGEPATH "IMAGE_PATH        = $inputDir/resources/ "
-    foreach docFile $DocFilesList {
-      set NEW_IMG_PATH "$inputDir/$docFile"
-      if { [string compare $NEW_IMG_PATH [OCCDoc_GetRootDir $productsPath]] != 0 } {
-        set img_string [file dirname $NEW_IMG_PATH]/images
-        if { [file exists $img_string] } {
-          append PARAM_IMAGEPATH " $img_string"
-        }
-      }
-      append PARAM_INPUT " " $inputDir/$docFile
-    }
-    puts $doxyFile $PARAM_INPUT
-    puts $doxyFile $PARAM_IMAGEPATH
-
-    # Add document type-specific options
-    if { $generatorMode == "HTML_ONLY"} {
-      # generate tree view
-      puts $doxyFile "GENERATE_TREEVIEW      = YES"
-
-      # Set a reference to a TAGFILE
-      if { $tagFileDir != "" } {
-        if {[file exists $tagFileDir/OCCT.tag] == 1} {
-          #set tagPath [OCCDoc_GetRelPath $tagFileDir $outDir/html]
-          set tagPath $tagFileDir
-          puts $doxyFile "TAGFILES               = $tagFileDir/OCCT.tag=../../refman/html"
-        }
-      }
-      # HTML Search engine options
-      if { [string tolower $searchMode] == "none" } {
-        puts $doxyFile "SEARCHENGINE           = NO"
-        puts $doxyFile "SERVER_BASED_SEARCH    = NO"
-        puts $doxyFile "EXTERNAL_SEARCH        = NO"
-      } else {
-        puts $doxyFile "SEARCHENGINE           = YES"
-        if { [string tolower $searchMode] == "local" } {
-          puts $doxyFile "SERVER_BASED_SEARCH    = NO"
-          puts $doxyFile "EXTERNAL_SEARCH        = NO"
-        } elseif { [string tolower $searchMode] == "server" } {
-          puts $doxyFile "SERVER_BASED_SEARCH    = YES"
-          puts $doxyFile "EXTERNAL_SEARCH        = NO"
-        } elseif { [string tolower $searchMode] == "external" } {
-          puts $doxyFile "SERVER_BASED_SEARCH    = YES"
-          puts $doxyFile "EXTERNAL_SEARCH        = YES"
-        } else {
-          puts "Error: Wrong search engine type: $searchMode."
-          close $doxyFile 
-          return -1
-        }
-      }
-    } elseif { $generatorMode == "CHM_ONLY"} {
-      # specific options for CHM file generation
-      puts $doxyFile "GENERATE_TREEVIEW      = NO"
-      puts $doxyFile "SEARCHENGINE           = NO"
-      puts $doxyFile "GENERATE_HTMLHELP      = YES"
-      puts $doxyFile "CHM_FILE               = ../../overview.chm"
-      puts $doxyFile "HHC_LOCATION           = \"$hhcPath\""
-      puts $doxyFile "DISABLE_INDEX          = YES"
-    }
-
-    # Formula options
-    puts $doxyFile "MATHJAX_RELPATH        = ${mathjaxLocation}"
-  }
-
-  close $doxyFile
-  return 0
-}

adm/occaux.tcl

@@ -1,897 +0,0 @@
-# =======================================================================
-# Created on: 2014-03-21
-# Created by: OMY
-# Copyright (c) 1996-1999 Matra Datavision
-# Copyright (c) 1999-2014 OPEN CASCADE SAS
-#
-# This file is part of Open CASCADE Technology software library.
-#
-# This library is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Lesser General Public License version 2.1 as published
-# by the Free Software Foundation, with special exception defined in the file
-# OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
-# distribution for complete text of the license and disclaimer of any warranty.
-#
-# Alternatively, this file may be used under the terms of Open CASCADE
-# commercial license or contractual agreement.
-# 
-# Brief: This script contains auxilary functions which can be used 
-#         in documentation generation process
-# =======================================================================
-
-# ==============================================
-# Commonly used functions
-# ==============================================
-
-# Parses arguments line like "-arg1=val1 -arg2=val2 ..." to array args_names and map args_values
-proc OCCDoc_ParseArguments {arguments} {
-  global args_names
-  global args_values
-  set args_names {}
-  array set args_values {}
-
-  foreach arg $arguments {
-    if {[regexp {^(-)[a-z]+$} $arg] == 1} {
-      set name [string range $arg 1 [string length $arg]-1]
-      lappend args_names $name
-      set args_values($name) "NULL"
-      continue
-    } elseif {[regexp {^(-)[a-z]+=.+$} $arg] == 1} {
-      set equal_symbol_position [string first "=" $arg]
-      set name [string range $arg 1 $equal_symbol_position-1]
-      lappend args_names $name
-      set value [string range $arg $equal_symbol_position+1 [string length $arguments]-1]
-      
-      # To parse a list of values for -m parameter
-      if { [string first "," $value] != -1 } {
-        set value [split $value ","];
-      }
-
-      set args_values($name) $value
-
-    } else {
-      puts "Error in argument $arg."
-      return 1
-    }
-  }
-  return 0
-}
-
-# Returns script parent folder
-proc OCCDoc_GetDoxDir {} {
-  return [file normalize [file dirname [info script]]/../dox]
-}
-
-# Returns OCCT root dir
-proc OCCDoc_GetOCCTRootDir {} {
-  set path [OCCDoc_GetDoxDir]
-  return [file normalize $path/..]
-}
-
-# Returns root dir
-proc OCCDoc_GetRootDir { {theProductsPath ""} } {
-
-  if { $theProductsPath == "" } {
-    return [OCCDoc_GetOCCTRootDir]
-  } else {
-    return [file normalize $theProductsPath]
-  }
-}
-
-# Returns OCCT include dir
-proc OCCDoc_GetIncDir { {theProductsPath ""} } {
-  set path [OCCDoc_GetRootDir $theProductsPath]
-  return "$path/inc"
-}
-
-# Returns OCCT source dir
-proc OCCDoc_GetSourceDir { {theProductsPath ""} } {
-  set path [OCCDoc_GetRootDir $theProductsPath]
-  return "$path/src"
-}
-
-# Returns name of the package from the current toolkit
-proc OCCDoc_GetNameFromPath { thePath } {
-
-  set splitted_path [split $thePath "/" ]
-  set package_name  [lindex $splitted_path end]
-
-  return $package_name
-}
-
-# Returns the relative path between two folders
-proc OCCDoc_GetRelPath {thePathFrom thePathTo} {
-  if { [file isdirectory "$thePathFrom"] == 0 } {
-    return ""
-  }
-
-  set aPathFrom [file normalize "$thePathFrom"]
-  set aPathTo   [file normalize "$thePathTo"]
-
-  set aCutedPathFrom "${aPathFrom}/dummy"
-  set aRelatedDeepPath ""
-
-  while { "$aCutedPathFrom" != [file normalize "$aCutedPathFrom/.."] } {
-    set aCutedPathFrom [file normalize "$aCutedPathFrom/.."]
-    # does aPathTo contain aCutedPathFrom?
-    regsub -all $aCutedPathFrom $aPathTo "" aPathFromAfterCut
-    if { "$aPathFromAfterCut" != "$aPathTo" } { # if so
-      if { "$aCutedPathFrom" == "$aPathFrom" } { # just go higher, for example, ./somefolder/someotherfolder
-        set aPathTo ".${aPathTo}"
-      } elseif { "$aCutedPathFrom" == "$aPathTo" } { # remove the last "/"
-        set aRelatedDeepPath [string replace $aRelatedDeepPath end end ""]
-      }
-      regsub -all $aCutedPathFrom $aPathTo $aRelatedDeepPath aPathToAfterCut
-      regsub -all "//" $aPathToAfterCut "/" aPathToAfterCut
-      return $aPathToAfterCut
-    }
-    set aRelatedDeepPath "$aRelatedDeepPath../"
-  }
-
-  return $thePathTo
-}
-
-# Returns OCCT version string from file Standard_Version.hxx (if available)
-proc OCCDoc_DetectCasVersion {} {
-  set occt_ver 6.7.0
-  set occt_ver_add ""
-  set filename "[OCCDoc_GetSourceDir]/Standard/Standard_Version.hxx"
-  if { [file exists $filename] } {
-    set fh [open $filename "r"]
-    set fh_loaded [read $fh]
-    close $fh
-    regexp {[^/]\s*#\s*define\s+OCC_VERSION_COMPLETE\s+\"([^\s]*)\"} $fh_loaded dummy occt_ver
-    regexp {[^/]\s*#\s*define\s+OCC_VERSION_DEVELOPMENT\s+\"([^\s]*)\"} $fh_loaded dummy occt_ver_add
-    if { "$occt_ver_add" != "" } { set occt_ver ${occt_ver}.$occt_ver_add }
-  }
-  return $occt_ver
-}
-
-# Checks if the necessary tools exist
-proc OCCDoc_DetectNecessarySoftware { DOXYGEN_PATH GRAPHVIZ_PATH INKSCAPE_PATH HHC_PATH PDFLATEX_PATH } {
-
-  upvar 1 DOXYGEN_PATH  doxy_path
-  upvar 1 GRAPHVIZ_PATH graph_path
-  upvar 1 INKSCAPE_PATH inkscape_path
-  upvar 1 HHC_PATH      hhc_path
-  upvar 1 PDFLATEX_PATH latex_path
-
-  set doxy_path     ""
-  set graph_path    ""
-  set inkscape_path ""
-  set latex_path    ""
-  set hhc_path      ""
-
-  set is_win "no"
-  if { "$::tcl_platform(platform)" == "windows" } {
-    set is_win "yes"
-  }
-  if {"$is_win" == "yes"} {
-    set exe ".exe"
-  } else {
-    set exe ""
-  }
-
-  set g_flag "no"
-  set d_flag "no"
-  set i_flag "no"
-  set h_flag "no"
-  set l_flag "no"
-
-  puts ""
-  set envPath $::env(PATH)
-  if { $is_win == "yes" } {
-    set searchPathsList [split $envPath ";"]
-  } else {
-    set searchPathsList [split $envPath ":"]
-  }
-
-  foreach path $searchPathsList {
-    if { ($is_win == "no") && 
-         (($path == "/usr/bin") || ($path == "/usr/local/bin")) } {
-        # Avoid searching in default bin location
-        continue
-    }
-    if {$d_flag == "no"} {
-      if { [file exists $path/doxygen$exe] } {
-        catch { exec $path/doxygen -V } version_string 
-        set version [lindex [split $version_string "\n"] 0]
-        puts "Info: $version "
-        puts "      found in $path."
-        set doxy_path "$path/doxygen$exe"
-        set d_flag "yes"
-      }
-    }
-    if {$g_flag == "no"} {
-      if { [file exists $path/dot$exe] } {
-        catch { exec $path/dot -V } version
-
-        puts "Info: $version "
-        puts "      found in $path."
-        set graph_path "$path/dot$exe"
-        set g_flag "yes"
-      }
-    }
-    if {$i_flag == "no"} {
-      if { [file exists $path/inkscape$exe] } {
-        catch { exec $path/inkscape -V } version
-        puts "Info: $version " 
-        puts "      found in $path."
-        set inkscape_path "$path/inkscape$exe"
-        set i_flag "yes"
-      }
-    }
-    if {$l_flag == "no"} {
-      if { [file exists $path/pdflatex$exe] } {
-        catch { exec $path/pdflatex -version } version
-        set version [lindex [split $version "\n"] 0]
-        puts "Info: $version " 
-        puts "      found in $path."
-        set latex_path "$path/pdflatex$exe"
-        set l_flag "yes"
-      }
-    }
-    if { ("$is_win" == "yes") && ($h_flag == "no") } {
-      if { [file exists $path/hhc.exe] } {
-        puts "Info: hhc " 
-        puts "      found in $path."
-        set hhc_path "hhc$exe"
-        set h_flag "yes"
-      }
-    }
-    if { ($d_flag == "yes") &&
-         ($i_flag == "yes") &&
-         ($g_flag == "yes") &&
-         ($l_flag == "yes") &&
-         (($is_win == "yes") && 
-          ($h_flag == "yes")) } {
-      break
-    }
-  }
-
-  # On Windows search for hhc.exe in the default location 
-  # if it has not been found yet
-  if { ("$is_win" == "yes") && ($h_flag == "no") } {
-    if { [info exists ::env(ProgramFiles\(x86\))] } {
-      set h_flag "yes"
-      set path "$::env(ProgramFiles\(x86\))\\HTML Help Workshop"
-      set hhc_path "$path\\hhc.exe"
-      puts "Info: hhc " 
-      puts "      found in $path."
-    } else {
-      if { [info exists ::env(ProgramFiles)] } {
-        set h_flag   "yes"
-        set path     "$::env(ProgramFiles)\\HTML Help Workshop"
-        set hhc_path "$path\\hhc.exe"
-        puts "Info: hhc" 
-        puts "      found in $path."
-      }
-    }
-  }
-
-  # On *nix-like platforms, 
-  # check the default binary locations if the tools had not been found yet
-  if {  $is_win == "no"  &&
-      (($d_flag == "no") ||
-       ($i_flag == "no") ||
-       ($g_flag == "no") ||
-       ($l_flag == "no")) } {
-
-    set default_path { "/usr/bin" "/usr/local/bin" }
-    foreach path $default_path {
-      if {$d_flag == "no"} {
-        if { [file exists $path/doxygen$exe] } {
-          catch { exec $path/doxygen -V } version_string 
-          set version [lindex [split $version_string "\n"] 0]
-          puts "Info: $version "
-          puts "      found in $path."
-          set doxy_path "$path/doxygen$exe"
-          set d_flag "yes"
-        }
-      }
-      if {$g_flag == "no"} {
-        if { [file exists $path/dot$exe] } {
-          catch { exec $path/dot -V } version
-
-          puts "Info: $version "
-          puts "      found in $path."
-          set graph_path "$path/dot$exe"
-          set g_flag "yes"
-        }
-      }
-      if {$i_flag == "no"} {
-        if { [file exists $path/inkscape$exe] } {
-          catch { exec $path/inkscape -V } version
-          puts "Info: $version " 
-          puts "      found in $path."
-          set inkscape_path "$path/inkscape$exe"
-          set i_flag "yes"
-        }
-      }
-      if {$l_flag == "no"} {
-        if { [file exists $path/pdflatex$exe] } {
-          catch { exec $path/pdflatex -version } version
-          set version [lindex [split $version "\n"] 0]
-          puts "Info: $version " 
-          puts "      found in $path."
-          set latex_path "$path/pdflatex$exe"
-          set l_flag "yes"
-        }
-      }
-    }
-  }
-
-  # Check if tools have been found
-  if { $d_flag == "no" } {
-    puts "Warning: Could not find doxygen installed."
-    return -1
-  }
-  if { $g_flag == "no" } {
-    puts "Warning: Could not find graphviz installed."
-  }
-  if { $i_flag == "no" } {
-    puts "Warning: Could not find inkscape installed."
-  }  
-  if { $l_flag == "no" } {
-    puts "Warning: Could not find pdflatex installed."
-  }
-  if { ("$::tcl_platform(platform)" == "windows") && ($h_flag == "no") } {
-    puts "Warning: Could not find hhc installed."
-  }
-
-  puts ""
-}
-
-# Convert SVG files to PDF format to allow including them to PDF
-# (requires InkScape to be in PATH)
-proc OCCDoc_ProcessSvg {latexDir verboseMode} {
-
-  foreach file [glob -nocomplain $latexDir/*.svg] {
-    if {$verboseMode == "YES"} {
-      puts "Info: Converting file $file..."
-    }
-    set pdffile "[file rootname $file].pdf"
-    if { [catch {exec inkscape -z -D --file=$file --export-pdf=$pdffile} res] } {
-      #puts "Error: $res."
-      return
-    }
-  }
-}
-
-# ==============================================
-# Reference Manual-specific functions
-# ==============================================
-
-# Finds dependencies between all modules  
-proc OCCDoc_CreateModulesDependencyGraph {dir filename modules mpageprefix} {
-  global module_dependency
-
-  if {![catch {open $dir/$filename.dot "w"} file]} {
-    puts $file "digraph $filename"
-    puts $file "\{"
-
-    foreach mod $modules {
-      if { $mod == "" } {
-        continue
-      }
-      puts $file "\t$mod \[ URL = \"[string tolower $mpageprefix$mod.html]\" \]"
-      foreach mod_depend $module_dependency($mod) {
-        puts $file "\t$mod_depend -> $mod \[ dir = \"back\", color = \"midnightblue\", style = \"solid\" \]"
-      }
-    }
-    
-    puts $file "\}"
-    close $file
-
-    return $filename
-  }
-}
-
-# Finds dependencies between all toolkits in module
-proc OCCDoc_CreateModuleToolkitsDependencyGraph {dir filename modulename tpageprefix} {
-  global toolkits_in_module
-  global toolkit_dependency
-  global toolkit_parent_module
-
-  if {![catch {open $dir/$filename.dot "w"} file]} {
-    puts $file "digraph $filename"
-    puts $file "\{"
-
-    foreach tk $toolkits_in_module($modulename) {
-      puts $file "\t$tk \[ URL = \"[string tolower $tpageprefix$tk.html]\"\ ]"
-      foreach tkd $toolkit_dependency($tk) {
-        if { [info exists toolkit_parent_module($tkd)] } {
-          if {$toolkit_parent_module($tkd) == $modulename} {
-            puts $file "\t$tkd -> $tk \[ dir = \"back\", color = \"midnightblue\", style = \"solid\" \]"    
-          }
-        }
-      }
-    }
-    
-    puts $file "\}"
-    close $file
-    
-    return $filename
-  }
-}
-
-# Finds dependencies between the current toolkit and other toolkits
-proc OCCDoc_CreateToolkitDependencyGraph {dir filename toolkitname tpageprefix} {
-  global toolkit_dependency
-  
-  if {![catch {open $dir/$filename.dot "w"} file]} {
-    puts $file "digraph $filename"
-    puts $file "\{"
-    
-    puts $file "\t$toolkitname \[ URL = \"[string tolower $tpageprefix$toolkitname.html]\"\, shape = box ]"
-    foreach tkd $toolkit_dependency($toolkitname) {
-      puts $file "\t$tkd \[ URL = \"[string tolower $tpageprefix$tkd.html]\"\ , shape = box ]"
-      puts $file "\t$toolkitname -> $tkd \[ color = \"midnightblue\", style = \"solid\" \]"    
-    }
-    
-    if {[llength $toolkit_dependency($toolkitname)] > 1} {
-    puts $file "\taspect = 1"
-    }
-    
-    puts $file "\}"
-    close $file
-    
-    return $filename
-  }
-}
-
-# Fills arrays of modules, toolkits, dependency of modules/toolkits etc 
-proc OCCDoc_LoadData { {theProductsDir ""} } {
-  global toolkits_in_module
-  global toolkit_dependency
-  global toolkit_parent_module
-  global module_dependency
-
-  if { $theProductsDir == ""} {
-    set modules_files [glob -nocomplain -type f -directory "[OCCDoc_GetSourceDir $theProductsDir]/OS/" *.tcl]
-  } else {
-    set modules_files [glob -nocomplain -type f -directory "[OCCDoc_GetSourceDir $theProductsDir]/VAS/" *.tcl]
-  }
-
-  foreach module_file $modules_files {
-    source $module_file
-  }
-
-  set modules [OCCDoc_GetModulesList $theProductsDir]
-  foreach mod $modules {
-
-    if { $mod == "" } {
-      continue
-    }
-    # Get toolkits of current module
-    set toolkits_in_module($mod) [$mod:toolkits]
-    # Get all dependence of current toolkit 
-    foreach tk $toolkits_in_module($mod) {
-      # set parent module of current toolkit
-      set toolkit_parent_module($tk) $mod
-      set exlibfile      [open "[OCCDoc_GetSourceDir $theProductsDir]/$tk/EXTERNLIB" r]
-      set exlibfile_data [read $exlibfile]
-      set exlibfile_data [split $exlibfile_data "\n"]
-        
-      set toolkit_dependency($tk) {}
-      foreach dtk $exlibfile_data {
-        if { ([string first "TK" $dtk 0] == 0) || 
-             ([string first "P"  $dtk 0] == 0) } {
-          lappend toolkit_dependency($tk) $dtk
-        }
-      }
-      close $exlibfile
-    }
-  }
-
-  # Get modules dependency
-  foreach mod $modules {
-    set module_dependency($mod) {}
-    foreach tk $toolkits_in_module($mod) {
-      foreach tkd $toolkit_dependency($tk) {
-        if { [info exists toolkit_parent_module($tkd)] } {
-          if { $toolkit_parent_module($tkd) != $mod &&
-               [lsearch $module_dependency($mod) $toolkit_parent_module($tkd)] == -1} {
-            lappend module_dependency($mod) $toolkit_parent_module($tkd)
-          }
-        }
-      }
-    }
-  }
-}
-
-# Returns list of packages of the given toolkit
-proc OCCDoc_GetPackagesList { theToolKitPath } {
-
-  set packages_list {}
-  
-  # Open file with list of packages of the given toolkit
-  set fileid [open "$theToolKitPath/PACKAGES" "r"]
-  
-  while { [eof $fileid] == 0 } {
-    set str [gets $fileid]
-    if { $str != "" } {
-      lappend packages_list $str
-    }
-  }
-
-  close $fileid
-  
-  return $packages_list
-}
-
-# Returns list of modules from UDLIST
-proc OCCDoc_GetModulesList { {theProductsDir ""} } {
-
-  if { $theProductsDir == "" } {
-    source "[OCCDoc_GetSourceDir $theProductsDir]/OS/Modules.tcl"
-    # load a command from this file
-    set modules [OS:Modules]
-  } else {
-    source "[OCCDoc_GetSourceDir $theProductsDir]/VAS/Products.tcl"
-    # load a command from this file
-    set modules [VAS:Products]
-  }
-
-  return $modules
-}
-
-# Returns list of desired files in the specified location
-proc OCCDoc_GetHeadersList { theDesiredContent theFileType thePackageName {theProductsDir ""} } {
-
-  # Get file type
-  set file_type_pattern "*.*"
-  if { $theFileType == "pubinclude" } {
-    set file_type_pattern "*.*"
-  } elseif { $theFileType == "privinclude" } {
-    set file_type_pattern "*.ixx"
-  }
-  
-  # Get content according to desired type ('p' for path and 'f' for filenames only)
-  if { $theDesiredContent == "p" } {
-
-    # Get list of files with path
-    set files_list [split [glob -nocomplain -type f -directory "[OCCDoc_GetIncDir $theProductsDir]" "$thePackageName$file_type_pattern"]]
-
-    return $files_list
-  } elseif { $theDesiredContent == "f" } {
-  # Get list of files without path
-    set files_list [split [glob -nocomplain -type f -directory "[OCCDoc_GetIncDir $theProductsDir]" "$thePackageName$file_type_pattern"]]
-
-    # Cut paths from filenames
-    foreach file $files_list {
-      set elem_index [lsearch $files_list $file]
-      lset files_list $elem_index [OCCDoc_GetNameFromPath [lindex $files_list $elem_index]]
-    }
-    return $files_list
-  }
-}
-
-# Returns location of the toolkit
-proc OCCDoc_Locate { theToolKitName {theProductsDir ""} } {
-  set tk_dir "[OCCDoc_GetSourceDir $theProductsDir]/[OCCDoc_GetNameFromPath $theToolKitName]"
-  return $tk_dir
-}
-
-# Gets contents of the given html node (for Post-processing)
-proc OCCDoc_GetNodeContents {node props html} {
-  set openTag "<$node$props>"
-  set closingTag "</$node>"
-  set start [string first $openTag $html]
-  if {$start == -1} {
-    return ""
-  }
-  set start [expr $start + [string length $openTag]]
-  set end   [string length $html]
-  set html  [string range $html $start $end]
-  set start [string first $closingTag $html]
-  set end   [string length $html]
-  if {$start == -1} {
-    return ""
-  }
-  set start [expr $start - 1]
-  return [string range $html 0 $start]
-}
-
-# Generates main page file describing module structure
-proc OCCDoc_MakeMainPage {outDir outFile modules {theProductsDir ""} } {
-  global env
-
-  set one_module [expr [llength $modules] == 1]
-  set fd [open $outFile "w"]
-
-  set module_prefix "module_"
-  set toolkit_prefix "toolkit_"
-  set package_prefix "package_"
-
-  if { ! [file exists "$outDir/html"] } {
-    file mkdir "$outDir/html"
-  }
-
-  OCCDoc_LoadData $theProductsDir
-
-  # Main page: list of modules
-  if { ! $one_module } {
-    puts $fd "/**"
-    puts $fd "\\mainpage Open CASCADE Technology"
-
-    foreach mod $modules {
-        puts $fd "\\li \\subpage [string tolower $module_prefix$mod]"
-    }
-    # insert modules relationship diagramm
-    puts $fd "\\dotfile [OCCDoc_CreateModulesDependencyGraph $outDir/html schema_all_modules $modules $module_prefix]"
-    puts $fd "**/\n"
-  }
-
-  # One page per module: list of toolkits
-  set toolkits {}
-  foreach mod $modules {
-    if { $mod == "" } {
-        continue
-    }
-    puts $fd "/**"
-    if { $one_module } {
-        puts $fd "\\mainpage OCCT Module [$mod:name]"
-    } else {
-        puts $fd "\\page [string tolower module_$mod] Module [$mod:name]"
-    }
-    foreach tk [lsort [$mod:toolkits]] {
-        lappend toolkits $tk
-        puts $fd "\\li \\subpage [string tolower $toolkit_prefix$tk]"
-    }
-    puts $fd "\\dotfile [OCCDoc_CreateModuleToolkitsDependencyGraph $outDir/html schema_$mod $mod $toolkit_prefix]"
-    puts $fd "**/\n"
-  }
-
-  # One page per toolkit: list of packages
-  set packages {}
-  foreach tk $toolkits {
-    puts $fd "/**"
-    puts $fd "\\page [string tolower toolkit_$tk] Toolkit $tk"
-    foreach pk [lsort [OCCDoc_GetPackagesList [OCCDoc_Locate $tk $theProductsDir]]] {
-        lappend packages $pk
-        set u [OCCDoc_GetNameFromPath $pk]
-        puts $fd "\\li \\subpage [string tolower $package_prefix$u]"
-    }
-    puts $fd "\\dotfile [OCCDoc_CreateToolkitDependencyGraph $outDir/html schema_$tk $tk $toolkit_prefix]"
-    puts $fd "**/\n"
-  }
-
-  # One page per package: list of classes
-  foreach pk $packages {
-    set u [OCCDoc_GetNameFromPath $pk]
-    puts $fd "/**"
-    puts $fd "\\page [string tolower $package_prefix$u] Package $u"
-    foreach hdr [lsort [OCCDoc_GetHeadersList "f" "pubinclude" "$pk" "$theProductsDir"]] {
-      if { ! [regexp {^Handle_} $hdr] && [regexp {(.*)[.]hxx} $hdr str obj] } {
-        puts $fd "\\li \\subpage $obj"
-      }
-    }
-    puts $fd "**/\n"
-  }
-
-  close $fd
-
-  return $outFile
-}
-
-# Parses generated files to add a navigation path 
-proc OCCDoc_PostProcessor {outDir} {
-  puts "[clock format [clock seconds] -format {%Y.%m.%d %H:%M}] Post-process is started ..."
-  append outDir "/html"
-  set files [glob -nocomplain -type f $outDir/package_*]
-  if { $files != {} } {
-    foreach f [lsort $files] {
-      set packageFilePnt  [open $f r]
-      set packageFile     [read $packageFilePnt]
-      set navPath         [OCCDoc_GetNodeContents "div" " id=\"nav-path\" class=\"navpath\"" $packageFile]
-      set packageName     [OCCDoc_GetNodeContents "div" " class=\"title\"" $packageFile]
-      regsub -all {<[^<>]*>} $packageName "" packageName 
-
-      # add package link to nav path
-      set first           [expr 1 + [string last "/" $f]]
-      set last            [expr [string length $f] - 1]
-      set packageFileName [string range $f $first $last]
-      set end             [string first "</ul>" $navPath]
-      set end             [expr $end - 1]
-      set navPath         [string range $navPath 0 $end]
-      append navPath "  <li class=\"navelem\"><a class=\"el\" href=\"$packageFileName\">$packageName</a>      </li>\n    </ul>"
-
-      # get list of files to update
-      set listContents [OCCDoc_GetNodeContents "div" " class=\"textblock\"" $packageFile]
-      set listContents [OCCDoc_GetNodeContents "ul" "" $listContents]
-      set lines [split $listContents "\n"]
-      foreach line $lines {
-        if {[regexp {href=\"([^\"]*)\"} $line tmpLine classFileName]} {
-          # check if anchor is there
-          set anchorPos [string first "#" $classFileName]
-          if {$anchorPos != -1} {
-            set classFileName [string range $classFileName 0 [expr $anchorPos - 1]]
-          }
-
-          # read class file
-          set classFilePnt [open $outDir/$classFileName r+]
-          set classFile    [read $classFilePnt]
-
-          # find position of content block 
-          set contentPos   [string first "<div class=\"header\">" $classFile]
-          set navPart      [string range $classFile 0 [expr $contentPos - 1]]
-
-          # position where to insert nav path
-          set posToInsert  [string last "</div>" $navPart]
-          set prePart      [string range $classFile 0 [expr $posToInsert - 1]]
-          set postPart     [string range $classFile $posToInsert [string length $classFile]]
-          set newClassFile ""
-          append newClassFile $prePart "  <div id=\"nav-path\" class=\"navpath\">" $navPath \n "  </div>" \n $postPart
-
-          # write updated content
-          seek $classFilePnt 0
-          puts $classFilePnt $newClassFile
-          close $classFilePnt
-        } 
-      }
-      close $packageFilePnt
-    }
-    return 0
-  } else {
-    puts "no files found"
-    return 1
-  }
-}
-
-# ======================================
-#  User Guides-specific functions
-# ======================================
-
-# Loads a list of docfiles from file FILES.txt
-proc OCCDoc_LoadFilesList {} {
-
-  set INPUTDIR [OCCDoc_GetDoxDir]
-
-  global available_docfiles
-  set available_docfiles {}
-
-  # Read data from file
-  if { [file exists "$INPUTDIR/FILES_HTML.txt"] == 1 } {
-    set FILE [open "$INPUTDIR/FILES_HTML.txt" r]
-    while {1} {
-      set line [string trim [gets $FILE]]
-
-      # trim possible comments starting with '#'
-      set line [regsub {\#.*} $line {}]
-      if {$line != ""} {
-        lappend available_docfiles $line
-      }
-      if {[eof $FILE]} {
-        close $FILE
-        break
-      }
-    }
-  } else {
-    return -1
-  }
-
-  global available_pdf
-  set    available_pdf {}
-
-  # Read data from file
-  if { [file exists "$INPUTDIR/FILES_PDF.txt"] } {
-    set FILE [open "$INPUTDIR/FILES_PDF.txt" r]
-    while {1} {
-      set line [string trim [gets $FILE]]
-
-      # Trim possible comments starting with '#'
-      set line [regsub {\#.*} $line {}]
-      if {$line != ""} {
-        lappend available_pdf $line
-      }
-      if {[eof $FILE]} {
-        close $FILE
-        break
-      }
-    }
-  } else {
-    return -1
-  }
-  return 0
-}
-
-# Writes new TeX file for conversion from tex to pdf for a specific doc
-proc OCCDoc_MakeRefmanTex {fileName latexDir verboseMode latexFilesList} {
-
-  if { $verboseMode == "YES" } {
-    puts "Info: Making refman.tex file for $fileName..."
-  }
-  set DOCNAME "$latexDir/refman.tex"
-  if {[file exists $DOCNAME] == 1} {
-    file delete -force $DOCNAME
-  }
-
-  # Copy template file to latex folder
-  file copy "[OCCDoc_GetDoxDir]/resources/occt_pdf_template.tex" $DOCNAME
-
-  # Get templatized data
-  set texfile [open $DOCNAME "r"]
-  set texfile_loaded [read $texfile]
-  close $texfile
-
-  # Replace dummy values 
-  set year       [clock format [clock seconds] -format {%Y}]
-  set texfile    [open $DOCNAME "w"]
-  set casVersion [OCCDoc_DetectCasVersion]
-
-  # Get name of the document
-  set docLabel   ""
-  foreach aFileName $latexFilesList {
-    # Find the file in FILES_PDF.txt
-    set parsedFileName [split $aFileName "/" ]
-    set newfileName [string range $fileName [expr [string first "__" $fileName] + 2] end]
-
-    if { [lsearch -nocase $parsedFileName "$newfileName.md" ] != -1 } {
-      set filepath "[OCCDoc_GetDoxDir]/$aFileName"
-      if { [file exists $filepath] } {
-        set MDFile   [open $filepath "r"]
-        set label    [split [gets $MDFile] "\{"]
-        set docLabel [lindex $label 0]
-        close $MDFile
-        
-        break
-      }
-    }
-  }
-
-  set texfile_loaded [string map [list DEFDOCLABEL "$docLabel" DEFCASVERSION "$casVersion" DEFFILENAME "$fileName" DEFYEAR "$year"] $texfile_loaded]
-
-  # Get data
-  puts $texfile $texfile_loaded
-
-  close $texfile
-}
-
-# Postprocesses generated TeX files
-proc OCCDoc_ProcessTex {{texFiles {}} {latexDir} verboseMode} {
-
-  foreach TEX $texFiles {
-    if {$verboseMode == "YES"} {
-      puts "Info: Preprocessing file $TEX..."
-    }
-
-    if {![file exists $TEX]} {
-      puts "Error: file $TEX does not exist."
-      return -1
-    }
-
-    set IN_F        [open "$TEX" "r"]
-    set TMPFILENAME "$latexDir/temp.tex"
-    set OUT_F       [open $TMPFILENAME w]
-
-        while {1} {
-            set line [gets $IN_F]
-            if { [string first "\\includegraphics" $line] != -1 } {
-              # replace svg extension by pdf
-              set line [regsub {[.]svg} $line ".pdf"]
-              # Center images in TeX files
-              set line "\\begin{center}\n $line\n\\end{center}"
-            } elseif { [string first "\\subsection" $line] != -1 } {
-                # Replace \subsection with \section tag
-                regsub -all "\\\\subsection" $line "\\\\section" line
-            } elseif { [string first "\\subsubsection" $line] != -1 } {
-                # Replace \subsubsection with \subsection tag
-                regsub -all "\\\\subsubsection" $line "\\\\subsection" line
-            } elseif { [string first "\\paragraph" $line] != -1 } {
-                # Replace \paragraph with \subsubsection tag
-                regsub -all "\\\\paragraph" $line "\\\\subsubsection" line
-            }
-            puts $OUT_F $line
-
-      if {[eof $IN_F]} {
-        close $IN_F
-        close $OUT_F
-        break
-      }
-    }
-
-    file delete -force $TEX
-    file rename $TMPFILENAME $TEX
-  }
-}

adm/start.tcl

@@ -1,8 +0,0 @@
-#!/usr/bin/tclsh
-
-# Command-line starter for occdoc command, use it as follows:
-# tclsh> source dox/start.tcl [arguments]
-
-source [file join [file dirname [info script]] occaux.tcl]
-source [file join [file dirname [info script]] gendoc.tcl]
-gendoc {*}$::argv

dox/FILES.txt

@@ -18,14 +18,13 @@ user_guides/user_guides.md
 user_guides/foundation_classes/foundation_classes.md
 user_guides/modeling_data/modeling_data.md
 user_guides/modeling_algos/modeling_algos.md
-user_guides/boolean_operations/boolean_operations.md
-user_guides/shape_healing/shape_healing.md
 user_guides/visualization/visualization.md
 user_guides/iges/iges.md
 user_guides/step/step.md
 user_guides/xde/xde.md
 user_guides/ocaf/ocaf.md
 user_guides/tobj/tobj.md
+user_guides/shape_healing/shape_healing.md
 user_guides/draw_test_harness.md
 user_guides/brep_wp/brep_wp.md
 user_guides/ocaf_functionmechanism_wp/ocaf_functionmechanism_wp.md

dox/FILES_PDF.txt

@@ -1,33 +0,0 @@
-# This file contains list of documentation files of OCCT which are processed
-# by Doxygen to generate PDF documentation.
-# Files are listed one file per line, with paths relative to dox folder.
-# Empty spaces are allowed.
-# Strings starting with '#' are treated as comments and ignored.
-
-user_guides/brep_wp/brep_wp.md
-user_guides/foundation_classes/foundation_classes.md
-user_guides/iges/iges.md
-user_guides/modeling_data/modeling_data.md
-user_guides/modeling_algos/modeling_algos.md
-user_guides/boolean_operations/boolean_operations.md
-user_guides/shape_healing/shape_healing.md
-user_guides/ocaf/ocaf.md
-user_guides/ocaf_functionmechanism_wp/ocaf_functionmechanism_wp.md
-user_guides/ocaf_tree_wp/ocaf_tree_wp.md
-user_guides/ocaf_wp/ocaf_wp.md
-user_guides/step/step.md
-user_guides/draw_test_harness.md
-user_guides/tobj/tobj.md
-user_guides/visualization/visualization.md
-user_guides/voxels_wp/voxels_wp.md
-user_guides/xde/xde.md
-
-dev_guides/contribution_workflow/contribution_workflow.md
-dev_guides/documentation/documentation.md
-dev_guides/contribution/coding_rules.md
-dev_guides/git_guide/git_guide.md
-dev_guides/tests/tests.md
-dev_guides/wok/wok.md
-dev_guides/cdl/cdl.md
-
-tutorial/tutorial.md

dox/dev_guides/building/3rdparty/3rdparty_linux.md

@@ -1,4 +1,4 @@
- Building 3rd-party libraries on Linux {#occt_dev_guides__building_3rdparty_linux}
+ Building 3rd-party libraries on Linux {#dev_guides__building_3rdparty_linux}
 =========
 
 @tableofcontents 
@@ -14,13 +14,8 @@ http://www.opencascade.org/getocc/require/.
 
 There are two types of third-party products, which are  necessary to build OCCT: 
   
-* Mandatory  products: 
-	* Tcl/Tk 8.5 - 8.6;  
-	* FreeType 2.4.10 - 2.4.11;
-* Optional  products: 
-	* TBB 3.x - 4.x;
-	* gl2ps 1.3.5 - 1.3.8;
-	* FreeImage 3.14.1 - 3.15.4.
+* Mandatory  products: Tcl/Tk 8.5 - 8.6 and  FreeType 2.4.10 - 2.4.11
+* Optional  products: TBB 3.x - 4.x, gl2ps 1.3.5 - 1.3.8, FreeImage 3.14.1 - 3.15.4
 
 @section dev_guides__building_3rdparty_linux_2 Building Mandatory Third-party Products
 
@@ -33,37 +28,37 @@ Tcl/Tk is required for DRAW test harness.
 It is possible to download ready-to-install binaries from 
 http://www.activestate.com/activetcl/downloads
 
-1. Download the binaries archive and unpack them to a directory, which is further referred to as *TCL_SRC_DIR*. 
-2. Enter the directory *TCL_SRC_DIR*.
+1. Download the binaries archive and unpack them to some  TCL_SRC_DIR. 
+2. Enter the directory TCL_SRC_DIR.
 
        cd TCL_SRC_DIR
 
-3. Run the install command:
+3. Run the install command 
 
        install.sh
     
-   and follow the instructions. 
+   and follow instructions. 
 
 @subsubsection dev_guides__building_3rdparty_linux_2_1_2 Installation from sources: Tcl
   
 Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 
   
-1. Enter the unix sub-directory of the directory where the Tcl source  files are located <i>(TCL_SRC_DIR)</i>. 
+1. Enter the unix sub-directory of the directory where the source  files of Tcl are located (TCL_SRC_DIR). 
 
        cd TCL_SRC_DIR/unix   
 
-2. Run the *configure* command:
+2. Run the configure command
 
        configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR   
 
-   For a 64 bit platform also add <i>--enable-64bit</i> option to the command line. 
+   For a 64 bit platform also add --enable-64bit option to the  command line. 
   
-3. If the configure command has finished successfully, start  the building process:
+3. If the configure command has finished successfully, start  the building process 
   
        make   
 
 4. If building is finished successfully, start the installation of Tcl. 
-   All binary and service files of the product will be copied to the directory defined by *TCL_INSTALL_DIR* 
+   All binary and service files of the product will be copied to the directory defined by TCL_INSTALL_DIR 
 
        make install   
 
@@ -71,47 +66,49 @@ Download the necessary archive from http://www.tcl.tk/software/tcltk/download.ht
   
 Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 
   
-1. Enter the unix sub-directory of the directory where the Tk source files are located <i>(TK_SRC_DIR)</i> 
+1. Enter the unix sub-directory of the directory where the source  files of Tk are located (TK_SRC_DIR). 
 
        cd TK_SRC_DIR/unix   
 
-2. Run the configure command, where <i>TCL_LIB_DIR</i> is *TCL_INSTALL_DIR/lib*.
+2. Run the configure command, where TCL_LIB_DIR is  TCL_INSTALL_DIR/lib 
 
        configure --enable-gcc  --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR  --prefix=TK_INSTALL_DIR   
 
-   For a 64 bit platform also add <i>--enable-64bit</i> option to the  command line. 
+   where TCL_LIB_DIR is TCL_INSTALL_DIR/lib 
 
-3. If the configure command has finished successfully, start the building process: 
+   For a 64 bit platform also add --enable-64bit option to the  command line. 
+
+3. If the configure command has finished successfully, start  the building process 
 
        make   
 
-4. If the building has finished successfully, start the installation of Tk. 
+4. If building has finished successfully, start the installation of Tk. 
    All binary and service files of the product will be copied 
-   to the directory defined by *TK_INSTALL_DIR* (usually it is *TCL_INSTALL_DIR*) 
+   to the directory defined by TK_INSTALL_DIR (usually  TK_INSTALL_DIR is TCL_INSTALL_DIR) 
 
        make install   
 
 @subsection dev_guides__building_3rdparty_linux_2_2 FreeType
 
-FreeType is required for text display in the 3D viewer. 
+FreeType is required for display of text in 3D viewer. 
 Download the necessary archive from http://sourceforge.net/projects/freetype/files/ and unpack it. 
   
-1. Enter the directory where the source files of FreeType  are located <i>(FREETYPE_SRC_DIR)</i>. 
+1. Enter the directory where the source files of FreeType  are located (FREETYPE_SRC_DIR). 
 
        cd FREETYPE_SRC_DIR   
 
-2. Run the *configure* command: 
+2. Run the configure command 
   
        configure  --prefix=FREETYPE_INSTALL_DIR   
 
-   For a 64 bit platform also add <i>CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC'</i> option to the command line. 
+   For a 64 bit platform also add CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC' option to the command line. 
     
-3. If the *configure* command has finished successfully, start  the building process: 
+3. If the configure command has finished successfully, start  the building process 
 
        make   
 
-4. If the building has finished successfully, start the installation of FreeType. 
-   All binary and service files of the product will be copied to the directory defined by *FREETYPE_INSTALL_DIR* 
+4. If building has finished successfully, start the installation of FreeType. 
+   All binary and service files of the product will be copied to the directory defined by FREETYPE_INSTALL_DIR 
     
        make install   
 
@@ -120,46 +117,46 @@ Download the necessary archive from http://sourceforge.net/projects/freetype/fil
 @subsection dev_guides__building_3rdparty_linux_3_1 TBB
 
 This third-party product is  installed with binaries from the archive that can be downloaded from http://threadingbuildingblocks.org. 
-Go to the **Download** page, find the  release version you need and pick the archive for Linux  platform. 
+Go to \"Downloads page\", find the  release version you need and pick the archive for Linux  platform. 
 To install, unpack the downloaded archive of TBB product.
 
 @subsection dev_guides__building_3rdparty_linux_3_2 gl2ps
 
 Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.
   
-1. Install or build *cmake* product from the source file. 
-2. Start *cmake* in GUI mode with the directory where the source files of gl2ps are located:
+1. Install or build cmake product from source file. 
+2. Start cmake in GUI mode with the directory where the source files of gl2ps are located:
 
        ccmake GL2PS_SRC_DIR   
 
-   * Press <i>[c]</i> to make the  initial configuration; 
-   * Define the necessary options in *CMAKE_INSTALL_PREFIX* 
-   * Press <i>[c]</i> to make the final  configuration 
-   * Press <i>[g]</i> to generate  Makefile and exit 
+   a. Press [c] to make the  initial configuration 
+   b. Define the necessary options  CMAKE_INSTALL_PREFIX 
+   c. Press [c] to make the final  configuration 
+   d. Press [g] to generate  Makefile and exit 
 
    or just run the following command: 
 
        cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
 
-3. Start the building of gl2ps: 
+3. Start building of gl2ps 
 
        make   
 
-4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option. 
+4. Start the installation of gl2ps. Binaries will be  installed according to the CMAKE_INSTALL_PREFIX option 
 
        make install   
 
 @subsection dev_guides__building_3rdparty_linux_3_3 FreeImage
 
 Download the necessary archive from http://sourceforge.net/projects/freeimage/files/Source%20Distribution/
-and unpack it. The directory with unpacked sources is  further referred to as *FREEIMAGE_SRC_DIR*. 
+and unpack it. The directory with unpacked sources is  further referred to as FREEIMAGE_SRC_DIR. 
   
-1. Modify *FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h*: 
+1. Modify FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h: 
    In line 60 insert the following: 
 
        #include string.h   
 
-2. Enter the directory where the source files of FreeImage are located <i>(FREEIMAGE_SRC_DIR)</i>. 
+2. Enter the directory where the source files of FreeImage are located (FREEIMAGE_SRC_DIR). 
   
        cd FREEIMAGE_SRC_DIR   
 
@@ -169,10 +166,11 @@ and unpack it. The directory with unpacked sources is  further referred to as *F
 
 4. Run the installation process 
 
-   a. If you have the permission to write into directories <i>/usr/include</i> and <i>/usr/lib</i>, run the following command: 
+   a. If you have permissions to write to /usr/include and /usr/lib directories then run the following command: 
 
           make install   
-   b. If you do not have this permission, you need to modify file *FREEIMAGE_SRC_DIR/Makefile.gnu*: 
+   b. If you don’t have permissions to write to /usr/include and 
+       /usr/lib directories then you need to modify the file FREEIMAGE_SRC_DIR/Makefile.gnu: 
   
       Change lines 7-9 from:
   
@@ -210,7 +208,7 @@ and unpack it. The directory with unpacked sources is  further referred to as *F
 
         make DESTDIR=FREEIMAGE_INSTALL_DIR  install   
 
-5. Clean temporary files
+5. Clean the temporary files
   
         make clean   
 
@@ -228,15 +226,15 @@ ICD Loader version 1.2.11.0.
    Khronos OpenCL Registry
    http://www.khronos.org/registry/cl/
 
-2. Unpack the archive and put headers in *inc/CL* sub-folder
+2. Unpack the archive and put headers in **inc/CL** sub-folder
 
-3. Print *make* in the root of the unpacked archive to compile OpenCL libraries.
+3. Print **make** in root of unpacked archive to compile OpenCL libraries.
 
 4. Create installation folder for OpenCL IDL Loader package and put there:
 
-    1. OpenCL header files in *include/CL* subfolder
+    1. OpenCL header files in **include/CL** subfolder
 
-    2. *libOpenCL.so* (generated in *bin* subfolder of source package) in *lib* subfolder
+    2. **libOpenCL.so** (generated in **bin** subfolder of source package) in **lib** subfolder
 
 @section dev_guides__building_3rdparty_linux_4 Installation From Official Repositories
 
@@ -254,13 +252,13 @@ from official repositories. You may install them from  console using apt-get uti
     libtbb-dev \   
     libgl2ps-dev   
   
-To launch binaries built with WOK  you need to install C shell and 32-bit libraries on x86_64 distributives: 
+To launch WOK-prebuilt binaries you need install C shell and  32-bit libraries on x86_64 distributives: 
   
     sudo apt-get install \   
     csh \   
     libstdc++5:i386 libxt6:i386   
 
-Building is possible with any C++  compliant compiler : 
+Any compliant C++ compiler is required for building anyway: 
   
     sudo apt-get install \   
     g++

dox/dev_guides/building/3rdparty/3rdparty_osx.md

@@ -1,4 +1,4 @@
- Building 3rd-party libraries on MacOS X {#occt_dev_guides__building_3rdparty_osx}
+ Building 3rd-party libraries on MacOS X {#dev_guides__building_3rdparty_osx}
 ==============================================
 @tableofcontents 
 
@@ -13,14 +13,8 @@ http://www.opencascade.org/getocc/require/</a>.
 
 There are two types of third-party products, which are  necessary to build OCCT: 
   
-* Mandatory  products: 
-	* Tcl 8.5, 
-	* Tk 8.5, 
-	* FreeType 2.4.10 
-* Optional  products: 
-	* TBB 3.x or 4.x, 
-	* gl2ps 1.3.5, 
-	* FreeImage 3.14.1 or 3.15.x 
+* Mandatory  products: Tcl 8.5, Tk 8.5, FreeType 2.4.10 
+* Optional  products: TBB 3.x or 4.x, gl2ps 1.3.5, FreeImage 3.14.1 or 3.15.x 
   
 @section dev_guides__building_3rdparty_osx_2 Building Mandatory Third-party Products
 
@@ -33,30 +27,30 @@ Tcl/Tk is required for DRAW test harness. Version 8.5 or  8.6 can be used with O
 It is possible to download ready-to-install binaries from 
 http://www.activestate.com/activetcl/downloads   
 
-1. Download the disk image to a directory, which is further referred to as *TCL_DOWNLOAD_DIR*. 
-2. Open the directory *TCL_DOWNLOAD_DIR* in the Finder . 
-3. Open the disk image and follow the instructions. 
+1. Download the disk image to some TCL_DOWNLOAD_DIR. 
+2. Open in Finder the directory TCL_DOWNLOAD_DIR. 
+3. Open disk image and follow instructions. 
 
 @subsubsection dev_guides__building_3rdparty_osx_2_1_2 Installation from sources: Tcl 8.5
 
 Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 
 
-1. Enter the *macosx* sub-directory of the directory where the Tcl source files are located <i>(TCL_SRC_DIR)</i>. 
+1. Enter the macosx sub-directory of the directory where the source files of Tcl are located (TCL_SRC_DIR). 
 
        cd TCL_SRC_DIR/macosx   
 
-2. Run the *configure* command 
+2. Run the configure command 
 
        configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR   
 
-   For a 64 bit platform also add <i>--enable-64bit</i> option to the command line. 
+   For a 64 bit platform also add --enable-64bit option to the command line. 
 
-3. If the *configure* command has finished successfully, start the building process 
+3. If the configure command has finished successfully, start the building process 
 
        make   
   
 4. If building is finished successfully, start the installation of Tcl. 
-   All binary and service files of the product will be copied to the directory defined by *TCL_INSTALL_DIR*. 
+   All binary and service files of the product will be copied to the directory defined by TCL_INSTALL_DIR 
 
        make install   
 
@@ -64,46 +58,48 @@ Download the necessary archive from http://www.tcl.tk/software/tcltk/download.ht
 
 Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it. 
 
-1. Enter the *macosx* sub-directory of the directory where the  source files of Tk are located <i>(TK_SRC_DIR)</i>. 
+1. Enter the macosx sub-directory of the directory where the  source files of Tk are located (TK_SRC_DIR). 
 
        cd TK_SRC_DIR/macosx   
 
-2. Run the *configure* command, where TCL_LIB_DIR is  TCL_INSTALL_DIR/lib 
+2. Run the configure command, where TCL_LIB_DIR is  TCL_INSTALL_DIR/lib 
 
        configure --enable-gcc --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR --prefix=TK_INSTALL_DIR   
 
-	For a 64 bit platform also add <i>--enable-64bit</i> option to the  command line. 
+   where TCL_LIB_DIR is TCL_INSTALL_DIR/lib. For a 64 bit platform also add --enable-64bit option to the  command line. 
 
-3. If the *configure* command has finished successfully, start the building process:
+3. If the configure command has finished successfully, start  the building process 
 
        make   
 
-4. If the building has finished successfully, start the  installation of Tk. All binary and service files of the product will be copied to the directory defined by *TK_INSTALL_DIR* (usually it is TCL_INSTALL_DIR) 
+4. If building has finished successfully, start the  installation of Tk. 
+   All binary and service files of the product will be copied to the directory 
+   defined by TK_INSTALL_DIR (usually TK_INSTALL_DIR  is TCL_INSTALL_DIR) 
 
        make install   
 
 @subsection dev_guides__building_3rdparty_osx_2_2 FreeType 2.4.10
   
-FreeType is required for text display in the 3D viewer. 
+FreeType is required for display of text in 3D viewer. 
 
 Download the necessary archive from http://sourceforge.net/projects/freetype/files/ and unpack it. 
 
-1. Enter the directory where the source files of FreeType  are located <i>(FREETYPE_SRC_DIR)</i>. 
+1. Enter the directory where the source files of FreeType  are located (FREETYPE_SRC_DIR). 
 
        cd FREETYPE_SRC_DIR   
 
-2. Run the *configure* command 
+2. Run the configure command 
   
        configure  --prefix=FREETYPE_INSTALL_DIR   
 
-   For a 64 bit platform also add <i>CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC'</i> option to the command line. 
+   For a 64 bit platform also add CFLAGS='-m64 -fPIC'  CPPFLAGS='-m64 -fPIC' option to the command line. 
 
-3. If the *configure* command has finished successfully, start  the building process 
+3. If the configure command has finished successfully, start  the building process 
 
        make   
 
 4. If building has finished successfully, start the installation of FreeType. 
-   All binary and service files of the product will be copied to the directory defined by *FREETYPE_INSTALL_DIR*.
+   All binary and service files of the product will be copied to the directory defined by FREETYPE_INSTALL_DIR 
 
        make install   
 
@@ -113,7 +109,7 @@ Download the necessary archive from http://sourceforge.net/projects/freetype/fil
 
 This third-party product is installed with binaries from the archive 
 that can be downloaded from http://threadingbuildingblocks.org/. 
-Go to the **Download** page, find the release version you need (e.g. *tbb30_018oss*) 
+Go to \"Downloads / Commercial  Aligned Release\", find the release version you need (e.g. tbb30_018oss) 
 and  pick the archive for Mac OS X platform. 
 To install, unpack the downloaded archive of TBB 3.0 product (*tbb30_018oss_osx.tgz*).
 
@@ -121,26 +117,26 @@ To install, unpack the downloaded archive of TBB 3.0 product (*tbb30_018oss_osx.
 
 Download the necessary archive from http://geuz.org/gl2ps/ and unpack it. 
 
-1. Install or build cmake product from the source file. 
+1. Install or build cmake product from source file. 
 
-2. Start cmake in GUI mode with the directory, where the source  files of *fl2ps* are located: 
+2. Start cmake in GUI mode with the directory where the source  files of fl2ps are located 
 
        ccmake GL2PS_SRC_DIR   
 
-   * Press <i>[c]</i> to make the  initial configuration; 
-   * Define the necessary options in *CMAKE_INSTALL_PREFIX*; 
-   * Press <i>[c]</i> to make the final  configuration; 
-   * Press <i>[g]</i> to generate  Makefile and exit. 
+   1. Press [c] to make the  initial configuration 
+   2. Define the necessary options  CMAKE_INSTALL_PREFIX 
+   3. Press [c] to make the final  configuration 
+   4. Press [g] to generate  Makefile and exit 
 
    or just run the following command: 
 
        cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
 
-3. Start the building of gl2ps 
+3. Start building of gl2ps 
 
        make   
 
-4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option 
+4. Start the installation of gl2ps. Binaries will be  installed according to the CMAKE_INSTALL_PREFIX option 
 
        make install   
 
@@ -148,20 +144,20 @@ Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.
 
 Download the necessary archive from 
 http://sourceforge.net/projects/freeimage/files/Source%20Distribution/   
-and unpack it. The directory with unpacked sources is  further referred to as *FREEIMAGE_SRC_DIR*.  
+and unpack it. The directory with unpacked sources is  further referred to as FREEIMAGE_SRC_DIR.  
 
-Note that for building FreeImage on Mac OS X 10.7 you should replace *Makefile.osx* 
-in *FREEIMAGE_SRC_DIR* by the corrected file, which you can find in attachment to issue #22811 in OCCT Mantis bug tracker 
-(http://tracker.dev.opencascade.org/file_download.php?file_id=6937&type=bug). 
+Note that for building FreeImage on Mac OS X 10.7 you should replace Makefile.osx 
+in FREEIMAGE_SRC_DIR by corrected one which you  can find in attachment to issue #22811 in OCCT Mantis bug tracker 
+(http://tracker.dev.opencascade.org/file_download.php?file_id=6937&type=bug) or elsewhere. 
 
-1. If you build FreeImage 3.15.x you can skip this  step. 
-   Modify <i>FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h:</i> 
+1. If you are building FreeImage 3.15.x you can skip this  step. 
+   Modify FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h: 
   
    In line 60 insert the following: 
 
        #include string.h 
 
-   Modify <i>FREEIMAGE_SRC_DIR/Source/FreeImage/PluginTARGA.cpp:</i> 
+   Modify FREEIMAGE_SRC_DIR/Source/FreeImage/PluginTARGA.cpp: 
   
    In line 320 replace: 
 
@@ -171,7 +167,7 @@ in *FREEIMAGE_SRC_DIR* by the corrected file, which you can find in attachment t
 
        SwapShort(&value); 
 
-2. Enter the directory where the source files of FreeImage  are located <i>(FREEIMAGE_SRC_DIR)</i>. 
+2. Enter the directory where the source files of FreeImage  are located (FREEIMAGE_SRC_DIR). 
 
        cd FREEIMAGE_SRC_DIR 
 
@@ -181,11 +177,12 @@ in *FREEIMAGE_SRC_DIR* by the corrected file, which you can find in attachment t
 
 4. Run the installation process 
    
-   1. If you have the permission to write into <i>/usr/local/include</i>  and <i>/usr/local/lib</i> directories, run the following command: 
+   1. If you have permissions to write to /usr/local/include  and /usr/local/lib directories then run the following command: 
 
           make install   
 
-   2. If you do not have this permission, you need to modify file *FREEIMAGE_SRC_DIR/Makefile.osx*: 
+   2. If you do not have permissions to write to /usr/include and /usr/lib directories 
+      then you need to modify the file FREEIMAGE_SRC_DIR/Makefile.osx: 
 
       Change line 49 from:     
 
@@ -216,6 +213,6 @@ in *FREEIMAGE_SRC_DIR* by the corrected file, which you can find in attachment t
   
           make PREFIX=FREEIMAGE_INSTALL_DIR  install 
   
-5. Clean temporary files 
+5. Clean the temporary files 
   
        make clean 

dox/dev_guides/building/3rdparty/3rdparty_windows.md

@@ -1,24 +1,27 @@
- Building 3rd-party libraries on Windows {#occt_dev_guides__building_3rdparty_windows}
+ Building 3rd-party libraries on Windows {#dev_guides__building_3rdparty_windows}
 ==============================================
 @tableofcontents
 
 @section dev_guides__building_3rdparty_win_1 Introduction
 
-This document presents guidelines for building third-party products used by Open CASCADE Technology (OCCT) and samples on Windows platform. It is assumed that you are already familiar with MS Visual Studio / Visual C++. 
+This document presents guidelines for building third-party products 
+used by Open CASCADE Technology (OCCT) and samples on Windows platform. 
 
-You need to use the same version of MS Visual Studio for building all third-party products and OCCT itself, in order to receive a consistent set of run-time binaries. 
+This guide assumfamiliar with MS Visual Studio / Visual C++. 
 
-The links for downloading the third-party products are available on the web site of OPEN CASCADE SAS at http://www.opencascade.org/getocc/require/. There are two types of third-party products used  by OCCT: 
+You need to use the same version of MS Visual Studio for building 
+all third-party products and OCCT itself, in order to receive a consistent set of run-time binaries. 
 
-* Mandatory  products: 
-	* Tcl/Tk 8.5 - 8.6;
-	* FreeType 2.4.10 - 2.4.11.
-* Optional  products:
-	* TBB 3.x - 4.x;
-	* gl2ps 1.3.5 - 1.3.8;
-	* FreeImage 3.14.1 -3.15.4.
+The links for downloading the third-party products are available on the web site 
+of OPEN CASCADE SAS at http://www.opencascade.org/getocc/require/. 
+There are two types of third-party products which are used  by OCCT: 
 
-It is recommended to create a separate new folder on your workstation, where you will unpack the downloaded archives of the third-party  products, and where you will build these products (for example, *c:\\occ3rdparty*). 
+* Mandatory  products: Tcl/Tk 8.5 - 8.6 and  FreeType 2.4.10 - 2.4.11
+* Optional  products: TBB 3.x - 4.x, gl2ps 1.3.5 - 1.3.8, FreeImage 3.14.1 -3.15.4
+
+It is recommended to create a separate new folder on your workstation where 
+you will unpack the downloaded archives of the third-party  products, 
+and where you will build these products (for example, *c:\\occ3rdparty*). 
 
 Further in this document, this folder is referred to as *3rdparty*. 
 
@@ -26,37 +29,39 @@ Further in this document, this folder is referred to as *3rdparty*.
 
 @subsection dev_guides__building_3rdparty_win_2_1 Tcl/Tk
 
-Tcl/Tk is required for DRAW test harness. We recommend installing a binary distribution that can be downloaded from http://www.activestate.com/activetcl.
+Tcl/Tk is required for DRAW test harness.We recommend installing a binary distribution that could 
+be downloaded from http://www.activestate.com/activetcl.
 
 Go to \"Free Downloads\" and pick the version of the Install Wizard 
 that matches your target platform – 32 bit (x86) or 64 bit (x64). 
 The version of Visual Studio you use is irrelevant when choosing the Install Wizard. 
 
-Run the downloaded Install Wizard and install Tcl/Tk products :
+Run the Install Wizard you  downloaded, and install Tcl/Tk products 
 
-* to *3rdparty\\tcltk-win32* folder (for 32-bit platform) or 
-* to *3rdparty\\tcltk-win64* folder (for 64-bit platform). 
+* to 3rdparty\\tcltk-win32 folder (for 32-bit platform) or 
+* to 3rdparty\\tcltk-win64 folder (for 64-bit platform). 
 
 Further in this document,  this folder is referred to as *tcltk*. 
 
 @subsection dev_guides__building_3rdparty_win_2_2 FreeType
 
-FreeType is required for text display in a 3D viewer. You can download its sources from http://sourceforge.net/projects/freetype/files/   
+FreeType is required for display of text in 3D viewer. 
+You can download its sources from http://sourceforge.net/projects/freetype/files/   
 
-### The building procedure
+The building process is the following:
 
-1. Unpack the downloaded archive of FreeType product into the *3rdparty*  folder. As a result, you will get a folder named, for example, *3rdparty\\freetype-2.4.10*.  Further in this document, this folder is referred to as *freetype*. 
-   
-2. Open the solution file *freetype\\builds\\win32\\vc20xx\\freetype.sln*  in Visual Studio. Here *vc20xx* stands for your version of Visual Studio. 
+1. Unpack the  downloaded archive of FreeType product into the *3rdparty*  folder. 
 
-3. Select the configuration to build: either Debug or Release. 
+   As a result, you should have a folder named for example, *3rdparty\\freetype-2.4.10*.  Further in this document, this folder is referred to as *freetype*. 
 
+2. Open the  solution file *freetype\\builds\\win32\\vc20xx\\freetype.sln*  in Visual Studio, where vc20xx stands for the version of Visual Studio you are  using. 
+3. Select a  configuration to build: either Debug or Release. 
 4. Build  the *freetype* project. 
 
-   As a result, you will get a  freetype import library (.lib) in the *freetype\\obj\\win32\\vc20xx*  folder.  
+   As a result, you will get a  freetype import library (.lib) in the *freetype\\obj\\win32\\vc20xx*  folder. 
 
-
-5. If you build FreeType for a 64 bit platform, select in the main menu **Build - Configuration Manager**  and add *x64* platform to the solution configuration by copying the settings from Win32 platform: 
+5. If you are  building for 64 bit platform, start the Configuration Manager (Build - Configuration Manager), 
+   and add *x64* platform to the solution configuration by copying the  settings from Win32 platform: 
 
    @image html /dev_guides/building/3rdparty/images/3rdparty_image001.png 
    @image latex /dev_guides/building/3rdparty/images/3rdparty_image001.png 
@@ -68,59 +73,63 @@ FreeType is required for text display in a 3D viewer. You can download its sourc
 
    Build the *freetype* project. 
 
-   As a result, you will obtain a 64 bit import library (.lib) file in the *freetype\\x64\\vc20xx*  folder. 
+   As a result, you should obtain a 64  bit import library (.lib) file in the *freetype\\x64\\vc20xx*  folder. 
 
-   To build FreeType as a dynamic library (.dll) follow steps 6, 7 and 8 of this procedure. 
+   If you want to build freetype as a dynamic library (.dll) follow items 6, 7 and 8 of this list. 
 
-6. Open menu Project-> Properties-> Configuration  Properties-> General and change option **Configuration Type** to *Dynamic  Library (.dll)*. 
+6. Open Project-Properties-Configuration  Properties-General and change option 'Configuration Type' to \"*Dynamic  Library (.dll)*\". 
 7. Edit file *freetype\\include\\freetype\\config\\ftoption.h*:  
   
-   in line 255, uncomment the definition of macro *FT_EXPORT* and change it as follows: 
+   in line 255, uncomment the definition of macro FT_EXPORT and change it as follows: 
 
        #define FT_EXPORT(x)   __declspec(dllexport) x 
 
 8. Build  the *freetype* project. 
 
-   As a result, you will obtain the files of the import  library (.lib) and the dynamic library (.dll)   in folders <i>freetype  \\objs\\release</i> or <i>\\objs\\debug </i>. 
-   
-   If you build for a 64 bit platform, follow step 5 of the procedure. 
+   As a result, you should obtain import  library (.lib) and dynamic library (.dll) 
+   files in *freetype  \\objs\\release or \\objs\\debug folders.* 
+   If you are building for a 64 bit  platform, follow item 5 of this list. 
 
-   To facilitate the use of FreeType libraries in OCCT with minimal adjustment of build procedures, it is recommended to copy the include files and libraries of FreeType into a separate folder, named according to the pattern: *freetype-compiler-bitness-building mode*, where: 
-   * **compiler** is *vc8* or *vc9* or *vc10* or *vc11*; 
-   * **bitness**  is *32* or *64*;
-   * **building mode** is *opt* (for Release) or *deb* (for Debug). 
+   In order to facilitate use of the  FreeType libraries in OCCT with minimal adjustment of its build procedures, 
+   it is recommended to copy the include files and libraries of FreeType to a separate folder, named according to the pattern: 
+   *freetype-compiler-bitness-building  mode*  
+   where 
     
-   The *include* subfolder should be copied as is, while libraries should be renamed to *freetype.lib* and *freetype.dll* (suffixes removed) and placed to subdirectories *lib *and  *bin*, respectively. If the Debug configuration is built, the Debug libraries should be put into subdirectories *libd* and *bind*. 
+   * compiler  is vc8 or vc9 or vc10 or vc11; 
+   * bitness  is 32 or 64; 
+   * building  mode is opt (for Release) or deb (for Debug) 
+    
+   The include subfolder should be copied as is, while libraries should be renamed to 
+   *freetype.lib* and *freetype.dll* (suffixes removed) and placed to subdirectories 
+   *lib *and  *bin*, respectively. If Debug configuration is built, 
+   the Debug libraries should be put in subdirectories *libd* and *bind*. 
 
 @section dev_guides__building_3rdparty_win_3 Building Optional Third-party Products
 
 @subsection dev_guides__building_3rdparty_win_3_1 TBB
 
-This third-party product is installed with binaries 
+This third-party product is  installed with binaries 
 from the archive that can be downloaded from http://threadingbuildingblocks.org/. 
-Go to the **Download** page, find the  release version you need  (e.g. *tbb30_018oss*) and pick the archive for Windows  platform. 
-
+Go to \"Downloads page\", find the  release version you need  (e.g. tbb30_018oss) and pick the archive for Windows  platform. 
 Unpack the downloaded  archive of TBB product into the *3rdparty* folder. 
-
 Further in this document,  this folder is referred to as *tbb*. 
 
 @subsection dev_guides__building_3rdparty_win_3_2  gl2ps
 
 This third-party product should be built as a dynamically loadable library (dll file). 
-You can download its sources from  http://geuz.org/gl2ps/src/. 
+You can download its sources from  http://geuz.org/gl2ps/src/ 
 
-### The building procedure
+The building process is the following: 
 
 1. Unpack the downloaded  archive of gl2ps product (e.g. *gl2ps-1.3.5.tgz*) into the *3rdparty*  folder. 
 
-   As a result, you will get a folder named, for example, *3rdparty\\gl2ps-1.3.5-source*. 
+   As a result, you should  have a folder named for example, *3rdparty\\gl2ps-1.3.5-source*. 
 
-   Rename it into <i>gl2ps-platform-compiler-building mode</i>, where 
-   * **platform** is *win32*  or *win64*; 
-   * **compiler** is *vc8*, *vc9* or *vc10*; 
-   * **building mode** - *opt*  (for release) or *deb* (for debug). 
-   
-   For example, <i>gl2ps-win64-vc10-deb</i>
+   Rename it according to the  rule: gl2ps-platform-compiler-building mode, where 
+
+   * platform is win32  or win64; 
+   * compiler is vc8 or  vc9 or vc10; 
+   * building mode - opt  (for release) or deb (for debug) 
 
    Further in this document,  this folder is referred to as *gl2ps*. 
 
@@ -129,7 +138,7 @@ You can download its sources from  http://geuz.org/gl2ps/src/.
 
 3. Edit the file *gl2ps\\CMakeLists.txt*. 
 
-   After line 113 in *CMakeLists.txt*: 
+   After line 113 in CMakeLists.txt: 
 
        set_target_properties(shared PROPERTIES  COMPILE_FLAGS \"-DGL2PSDLL -DGL2PSDLL_EXPORTS\")
     
@@ -137,9 +146,10 @@ You can download its sources from  http://geuz.org/gl2ps/src/.
     
        add_definitions(-D_USE_MATH_DEFINES)  
 
-   Attention: If Cygwin was installed on  your computer, make sure that there is no path to it in the *PATH* variable to avoid possible conflicts during the configuration. 
+   Attention: If cygwin was installed on  your computer make sure that there is no path 
+   to the latter in the PATH variable in order to avoid possible conflicts during  the configuration. 
 
-4. Launch CMake <i>(cmake-gui.exe)</i> using  the Program menu. 
+4. Launch CMake (cmake-gui.exe) using  the Program menu. 
 
    In CMake: 
   
@@ -151,41 +161,39 @@ You can download its sources from  http://geuz.org/gl2ps/src/.
      (for example, *gl2ps\\bin*). 
      Further in this document, this folder is referred to as *gl2ps_bin*.
 
-   * Press  **Configure** button. 
-   
+   * Press the \"Configure\" button. 
      @image html /dev_guides/building/3rdparty/images/3rdparty_image004.png 
      @image latex /dev_guides/building/3rdparty/images/3rdparty_image004.png 
 
    * Select the generator (the compiler  and the target platform - 32 or 64 bit) in the pop-up window. 
-   
      @image html /dev_guides/building/3rdparty/images/3rdparty_image005.png 
      @image latex /dev_guides/building/3rdparty/images/3rdparty_image005.png 
 
-   * Press **Finish** button to  return to the main CMake window. 
+   * Then press the \"Finish\" button to  return to the main CMake window. 
      Expand the ENABLE group and uncheck  ENABLE_PNG and ENABLE_ZLIB check boxes. 
-	 
      @image html /dev_guides/building/3rdparty/images/3rdparty_image006.png 
      @image latex /dev_guides/building/3rdparty/images/3rdparty_image006.png 
 
-   * Expand the CMAKE group and define *CMAKE_INSTALL_PREFIX* which is the path where you want to install the build results, for example, *c:\\occ3rdparty\\gl2ps-1.3.5*. 
-   
+   * Expand the CMAKE group and define CMAKE_INSTALL_PREFIX 
+     (path where you want to install the build results, for example, *c:\\occ3rdparty\\gl2ps-1.3.5*). 
      @image html /dev_guides/building/3rdparty/images/3rdparty_image007.png 
      @image latex /dev_guides/building/3rdparty/images/3rdparty_image007.png 
 
-   * Press **Configure** button again, then press **Generate** button to generate Visual Studio projects. After completion, close CMake application. 
+   * Press the  \"Configure\" button again, and then the \"Generate\" button in order to generate 
+       Visual Studio projects. After completion, close CMake application. 
 
 5. Open the solution file *gl2ps_bin\\gl2ps.sln* in Visual Studio. 
 
-   * Select a configuration to build 
-     * Choose **Release** to build Release binaries. 
-     * Choose **Debug** to build Debug binaries. 
-   * Select a platform to build. 
-     * Choose **Win32** to build for a 32 bit platform. 
-     * Choose **x64** to build for a 64 bit platform. 
+   * Select a  configuration to build 
+     * Choose \"*Release*\" if you are building Release binaries. 
+     * Choose \"*Debug*\" if you are building Debug binaries. 
+   * Select  a platform to build. 
+     * Choose \"*Win32*\" if you are building for a 32 bit  platform. 
+     * Choose \"*x64*\" if you are building for a 64 bit  platform. 
    * Build the solution. 
    * Build the *INSTALL* project. 
     
-As a  result, you should have the installed gl2ps product in the *CMAKE_INSTALL_PREFIX* path. 
+As a  result, you should have the installed gl2ps product in the *CMAKE_INSTALL_PREFIX*  path. 
 
 @subsection dev_guides__building_3rdparty_win_3_3 FreeImage
 
@@ -193,70 +201,73 @@ This third-party product should be built as a dynamically loadable library (.dll
 You can download its sources from 
 http://sourceforge.net/projects/freeimage/files/Source%20Distribution/
 
-### The building procedure: 
+The building process is the following: 
 
 1. Unpack the  downloaded archive of FreeImage product into *3rdparty* folder. 
   
-   As a result, you should have a folder named *3rdparty\\FreeImage*. 
+   As a result,  you should have a folder named *3rdparty\\FreeImage*. 
   
-   Rename it according to the rule: *freeimage-platform-compiler-building  mode*, where 
+   Rename it  according to the rule: freeimage-platform-compiler-building  mode, where 
    
-   * **platform**  is *win32* or *win64*; 
-   * **compiler**  is *vc8* or *vc9* or *vc10* or *vc11*; 
-   * **building  mode** is *opt* (for release) or *deb* (for debug) 
+   * platform  is win32 or win64; 
+   * compiler  is vc8 or vc9 or vc10 or vc11; 
+   * building  mode is opt (for release) or deb (for debug) 
 
    Further in this  document, this folder is referred to as *freeimage*. 
 
-2. Open the solution file *freeimage\\FreeImage.*.sln* in your Visual Studio. 
+2. Open the  solution file *freeimage\\FreeImage.*.sln* in Visual Studio  that corresponds to the version of Visual Studio you use. 
   
-   If you use a Visual Studio version higher than VC++ 2008, apply conversion of the workspace. 
+   Since the  version of Visual Studio you use is higher than VC++ 2008, apply conversion of the workspace. 
    Such conversion should be suggested automatically by Visual  Studio. 
     
 3. Select a  configuration to build. 
 
-   - Choose **Release**  if you are building Release binaries. 
-   - Choose **Debug** if you are building  Debug binaries. 
+   - Choose \" *Release* \"  if you are building Release binaries. 
+   - Choose \" *Debug* \" if you are building  Debug binaries. 
 
    *Note:* 
 
-   If you want to  build a debug version of FreeImage binaries then you need to rename the following files in FreeImage and FreeimagePlus projects:
-   
-   Project -> Properties -> Configuration Properties -> Linker -> General -> Output File
+   If you want to  build a debug version of FreeImage binaries then you must rename 
+   the following  files for projects FreeImage and FreeimagePlus:
 
-       FreeImage*d*.dll  to FreeImage.dll 
-       FreeImagePlus*d*.dll to FreeImagePlus.dll 
+   Project-Properties-Configuration Properties-Linker-General-Output File
 
-   Project -> Properties -> Configuration Properties -> Linker -> Debugging-> Generate Program Database File
+       from FreeImage*d*.dll  to FreeImage.dll 
+       from  FreeImagePlus*d*.dll to FreeImagePlus.dll 
 
-       FreeImage*d*.pdb  to FreeImage.pdb 
-       FreeImagePlus*d*.pdb to FreeImagePlus.pdb 
+   Project-Properties-Configuration Properties-Linker-Debugging-Generate Program Database File
 
-   Project -> Properties -> Configuration Properties -> Linker -> Advanced-Import Library
+       from FreeImage*d*.pdb  to FreeImage.pdb 
+       from  FreeImagePlus*d*.pdb to FreeImagePlus.pdb 
 
-       FreeImage*d*.lib  to FreeImage.lib 
-       FreeImagePlus*d*.lib  to FreeImagePlus.lib 
+   Project-Properties-Configuration Properties-Linker-Advanced-Import Library
 
-   Project -> Properties -> Configuration Properties -> Build Events -> Post -> Build Event -> Command Line 
+       from FreeImage*d*.lib  to FreeImage.lib 
+       from FreeImagePlus*d*.lib  to FreeImagePlus.lib 
 
-       FreeImage*d*.dll     to FreeImage.dll 
-       FreeImage*d*.lib     to FreeImage.lib 
-       FreeImagePlus*d*.dll to FreeImagePlus.dll 
-       FreeImagePlus*d*.lib to FreeImagePlus.lib 
+   Project-Properties-Configuration Properties-Build Events-Post-Build Event-Comand Line 
 
-   Additionally, rename in project FreeImagePlus 
-   
-   Project -> Properties -> Configuration  Properties -> Linker -> Input -> Additional Dependencies 
+       from FreeImage*d*.dll     to FreeImage.dll 
+       from FreeImage*d*.lib     to FreeImage.lib 
+       from FreeImagePlus*d*.dll to FreeImagePlus.dll 
+       from FreeImagePlus*d*.lib to FreeImagePlus.lib 
+
+   Additionally, for project FreeImagePlus rename: 
+   Project-Properties-Configuration  Properties-Linker-Input-Additional Dependencies 
 
        from FreeImage*d*.lib to FreeImage.lib 
 
 4. Select a platform to build. 
 
-   - Choose *Win32* if you are building for a 32 bit platform. 
-   - Choose *x64* if you are building for a 64 bit platform. 
+   - Choose \" *Win32* \" if you are building for a 32 bit platform. 
+   - Choose \" *x64* \" if you are building for a 64 bit platform. 
 
 5. Start the building process. 
 
-   As a result, you should have the  library files of FreeImage product  in *freeimage\\Dist* folder (*FreeImage.dll* and *FreeImage.lib*) and in *freeimage\\Wrapper\\FreeImagePlus\\dist* folder (*FreeImagePlus.dll* and *FreeImagePlus.lib*).
+   As a result, you should have the  library files of FreeImage product in the 
+   *freeimage\\Dist* folder (FreeImage.dll and FreeImage.lib files) and in the 
+   *freeimage\\Wrapper\\FreeImagePlus\\dist* folder (FreeImagePlus.dll and 
+   FreeImagePlus.lib files).
 
 @subsection dev_guides__building_3rdparty_win_opencl OpenCL ICD Loader
 
@@ -272,21 +283,29 @@ ICD Loader version 1.2.11.0.
    Khronos OpenCL Registry
    http://www.khronos.org/registry/cl/
 
-2. Unpack the archive and put headers in *inc/CL* sub-folder
+2. Unpack the archive and put headers in **inc/CL** sub-folder
 
 3. Use CMake to generate VS projects for building the library:
-   - Start CMake-GUI and select OpenCL ICD Loader folder as source path, and the folder of your choice for VS project and intermediate build data;
-   - Click **Generate**;
-   - Select the VS version to be used from the ones you have installed (we recommend using VS 2010) and the architecture (32- or 64-bit).
+   - Start CMake-GUI and select OpenCL ICD Loader folder as source path,
+     and the folder of your choice for VS project and intermediate build data
+   - Click Generate
+   - Select VS version to be used (among the one you have installed; we
+     recommend using VS 2010), and architecture (32- or 64-bit)
 
-4. Open solution *OPENCL_ICD_LOADER.sln* generated in the build folder.
-   Though not strictly necessary, we recommend making two changes in the generated projects:
-   - Add file *OpenCL.rc* to project OpenCL, to have version and Khronos copyright correctly embedded in DLL;
-   - Change **Runtime library** to **Multi-threaded(/MT)** in the properties of OpenCL project, on **C/C++ / Code Generation** page for Release configuration, to avoid dependency on run-time DLL. 
+4. Open solution **OPENCL_ICD_LOADER.sln** generated in the build folder.
+   Though not strictly necessary, we recommend making two changes in generated 
+   projects:
+   - Add file **OpenCL.rc** to project OpenCL, to have version and Khronos 
+     copyright correctly embedded in DLL
+   - In properties of OpenCL project, on "C/C++ / Code Generation" page,
+     for Release configuration, change "Runtime library" to "Multi-threaded 
+     (/MT)", to avoid dependency on run-time DLL. 
   
 5. Build project OpenCL in Release mode
 
-6. Create the installation folder for OpenCL IDL Loader package and put there:
-   - OpenCL header files in *include/CL* subfolder;
-   - *OpenCL.dll* (generated in *bin/Release* subfolder of the source package) in *bin* subfolder;
-   - *OpenCL.lib* (generated in *Release* subfolder of the build directory) in *lib* subfolder.
+6. Create installation folder for OpenCL IDL Loader package and put there:
+   - OpenCL header files in **include/CL** subfolder
+   - OpenCL.dll (generated in **bin/Release** subfolder of source package)
+     in **bin** subfolder
+   - OpenCL.lib (generated in **Release** subfolder of build directory)
+     in **lib** subfolder

dox/dev_guides/building/automake.md

@@ -1,4 +1,4 @@
-Building with Automake {#occt_dev_guides__building_automake}
+Building with Automake {#dev_guides__building__automake}
 ======================
 
 This file describes steps to build OCCT libraries from complete source
@@ -6,10 +6,10 @@ archive on Linux with GNU build system (Autotools).
 
 If you are building OCCT from bare sources (as in Git repository), or do some 
 changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See paragraph 1 \ref occt_dev_guides__building_wok for instructions.
+and build scripts / projects. See paragraph 1 \ref dev_guides__building__wok for instructions.
 
 Before building OCCT, you need to install required third-party libraries; see paragraph 1 of 
-\ref occt_dev_guides__building for instructions.
+\ref dev_guides__building for instructions.
 
 Note that during compilation by makefiles on some Linux OS on a station with 
 NVIDIA video card you may experience problems because the installation 

dox/dev_guides/building/building.md

@@ -1,4 +1,4 @@
-Building OCCT from sources {#occt_dev_guides__building}
+Building OCCT from sources {#dev_guides__building}
 =========
 
 In order to build OCCT libraries from these sources for use in your program, 
@@ -9,23 +9,24 @@ you need to:
 
    See the following documents for short guide to installation of 
    third-party libraries on different platforms:
-   - \subpage occt_dev_guides__building_3rdparty_windows
-   - \subpage occt_dev_guides__building_3rdparty_linux
-   - \subpage occt_dev_guides__building_3rdparty_osx
+   - \subpage dev_guides__building_3rdparty_windows
+   - \subpage dev_guides__building_3rdparty_linux
+   - \subpage dev_guides__building_3rdparty_osx
+
 
 2. If you use bare OCCT sources from Git repository or made some changes affecting
    CDL files or dependencies of OCCT toolkits, you need to update header files generated
-   from \ref occt_dev_guides__cdl "CDL", and regenerate build scripts for your environment using WOK.
-   See \subpage occt_dev_guides__building_wok for details.
+   from \ref dev_guides__cdl "CDL", and regenerate build scripts for your environment using WOK.
+   See \subpage dev_guides__building__wok for details.
 
    Skip to step 3 if you use complete source package (e.g. official OCCT 
    release) without changes in CDL.
 
 3. Build using your preferred build tool.
-   - \subpage occt_dev_guides__building_automake "Building on Linux with Autotools"
-   - \subpage occt_dev_guides__building_cmake "Building with CMake (cross-platform)"
-   - \subpage occt_dev_guides__building_code_blocks "Building on Mac OS X with Code::Blocks"
-   - \subpage occt_dev_guides__building_msvc "Building on Windows with MS Visual Studio"
-   - \subpage occt_dev_guides__building_xcode "Building on Mac OS X with Xcode"
+   - \subpage dev_guides__building__automake "Building on Linux with Autotools"
+   - \subpage dev_guides__building__cmake "Building with CMake (cross-platform)"
+   - \subpage dev_guides__building__code_blocks "Building on Mac OS X with Code::Blocks"
+   - \subpage dev_guides__building__msvc "Building on Windows with MS Visual Studio"
+   - \subpage dev_guides__building__xcode "Building on Mac OS X with Xcode"
 
 The current version of OCCT can be consulted in the file src/Standard/Standard_Version.hxx

dox/dev_guides/building/cmake/cmake.md

@@ -1,4 +1,4 @@
-Building with CMake {#occt_dev_guides__building_cmake}
+Building with CMake {#dev_guides__building__cmake}
 ===================
 
 @tableofcontents
@@ -10,10 +10,10 @@ required.
 
 If you are building OCCT from bare sources (as in Git repository), or do some 
 changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See \ref occt_dev_guides__building_wok for instructions.
+and build scripts / projects. See \ref dev_guides__building__wok for instructions.
 
 Before building OCCT, you need to install required third-party libraries; see
-instructions for your platform in @ref occt_dev_guides__building.
+instructions for your platform in @ref dev_guides__building.
 
 ## Decide on location of build and install directories.
 

dox/dev_guides/building/code_blocks.md

@@ -1,4 +1,4 @@
-Building with Code::Blocks on Mac OS X {#occt_dev_guides__building_code_blocks}
+Building with Code::Blocks on Mac OS X {#dev_guides__building__code_blocks}
 ======================================
 
 This file describes steps to build OCCT libraries from complete source package
@@ -6,10 +6,10 @@ on Mac OS X with Code::Blocks.
 
 If you are building OCCT from bare sources (as in Git repository), or do some 
 changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See \ref occt_dev_guides__building_wok for instructions.
+and build scripts / projects. See \ref dev_guides__building__wok for instructions.
 
 Before building OCCT, you need to install required third-party libraries; see
-paragraph 1 of \ref occt_dev_guides__building for details.
+paragraph 1 of \ref dev_guides__building for details.
 
 1. Add paths to the mandatory 3rd-party products (Tcl/Tk and FreeType) in file 
    custom.sh located in \<OCCT_ROOT_DIR\>. For this:

dox/dev_guides/building/msvc.md

@@ -1,4 +1,4 @@
-Building with MS Visual C++ {#occt_dev_guides__building_msvc}
+Building with MS Visual C++ {#dev_guides__building__msvc}
 ===========================
 
 This file describes steps to build OCCT libraries from complete source
@@ -6,10 +6,10 @@ archive on Windows with MS Visual C++.
 
 If you are building OCCT from bare sources (as in Git repository), or do some 
 changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See \ref occt_dev_guides__building_wok for instructions.
+and build scripts / projects. See \ref dev_guides__building__wok for instructions.
 
 Before building OCCT, you need to install required third-party libraries; see
-paragraph 1 of \ref occt_dev_guides__building for instructions.
+paragraph 1 of \ref dev_guides__building for instructions.
 
 1. Edit file custom.bat to define environment: 
 

dox/dev_guides/building/wok/wok.md

@@ -1,11 +1,11 @@
-Using WOK {#occt_dev_guides__building_wok}
+Using WOK {#dev_guides__building__wok}
 =========
 
 @tableofcontents
 
-\ref occt_dev_guides__wok "WOK" is a legacy build environment for Open CASCADE Technology. 
+\ref dev_guides__wok "WOK" is a legacy build environment for Open CASCADE Technology. 
 It is required for generation of header files for classes defined with 
-@ref occt_dev_guides__cdl "CDL" ("Cascade Definition Language"). 
+@ref dev_guides__cdl "CDL" ("Cascade Definition Language"). 
 Also tools for generation of project files for other build systems, and OCCT 
 documentation, are integrated to WOK.
 
@@ -28,25 +28,25 @@ and third-party components required for building OCCT.
   @image html /dev_guides/building/wok/images/wok_image001.png
   @image latex /dev_guides/building/wok/images/wok_image001.png
  
-  Click **Next** and proceed with the installation.
+  Click Next and proceed with the installation.
   At the end of the installation you will be prompted to specify the version and the location of Visual Studio to be used, and the location of third-party libraries:
   
   @image html /dev_guides/building/wok/images/wok_image002.png
   @image latex /dev_guides/building/wok/images/wok_image002.png
  
-  You can change these settings at any time later. For this click on the item **Customize environment (GUI tool)** in the WOK group in the Windows Start menu.
+  You can change these settings at any time later. For this click on the item "Customize environment (GUI tool)" in the WOK group in the Windows Start menu.
   
   The shortcuts from this group provide two ways to run WOK: 
-  * In command prompt window using option *WOK TCL shell*. 
-  * In Emacs editor using option *WOK Emacs*. Using Emacs is convenient if you need to work within WOK environment. 
+  * In command prompt window ("WOK TCL shell"). 
+  * In Emacs editor ("WOK Emacs"). Using Emacs is convenient if you need to work within WOK environment. 
 
-  By default WOK installer creates a WOK factory with name *LOC* within workshop *dev*. I.e. the WOK path is <i>:LOC:dev</i>. 
+  By default WOK installer creates a WOK factory with name "LOC" within workshop "dev" (WOK path :LOC:dev). 
 
 @subsection wok12 Linux
 
-  * Unpack the .tgz archive containing WOK distributive into the installation directory <i>\<WOK_INSTALL_DIR\></i>.
+  * Unpack the .tgz archive containing WOK distributive into an installation directory \<WOK_INSTALL_DIR\>.
 
-  * Perform the following commands assuming that you have unpacked WOK distributive archive into <i>\<WOK_INSTALL_DIR\></i>:
+  * Perform the following commands assuming that you have unpacked WOK distributive archive into \<WOK_INSTALL_DIR\>:
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
   cd \<WOK_INSTALL_DIR\>/site
   wok_confgui.sh
@@ -76,9 +76,9 @@ and third-party components required for building OCCT.
 
 @subsection wok13 Mac OS X
 
-  * Double click on file *wokSetup.dmg* in the Finder. This opens a new window. Drag and drop *wokSetup* folder from this window at the location in the Finder where you want to install WOK, i.e. <i>\<WOK_INSTALL_DIR\></i>.
+  * In the Finder double click on wokSetup.dmg file. This will open a new window. Drag and drop "wokSetup" folder from this window at the location in the Finder where you want to install WOK, i.e. \<WOK_INSTALL_DIR\>.
   
-  * Browse to the folder <i>\<WOK_INSTALL_DIR\>/site</i> and double click on *WokConfig*. This opens a window with additional search path settings. Define all necessary paths to third-party products in the dialog window:
+  * Browse in the Finder to the folder \<WOK_INSTALL_DIR\>/site and double click on WokConfig. This will open a window with additional search path settings. Define all necessary paths to third-party products in the dialog window:
   
   @image html /dev_guides/building/wok/images/wok_image004.png
   @image latex /dev_guides/building/wok/images/wok_image004.png
@@ -89,74 +89,74 @@ and third-party components required for building OCCT.
   wok_init.sh
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   
-  * Your installation procedure is over. To run WOK in Emacs navigate in the Finder to the folder <i>\<WOK_INSTALL_DIR\>/site</i> and double click on *WokEmacs*.
+  * Your installation procedure is over. To run WOK in Emacs navigate in the Finder to the folder \<WOK_INSTALL_DIR\>/site and double click on WokEmacs.
 
 
 @section wok2 Initialization of Workbench
 
   To start working with OCCT, clone the OCCT Git repository from the server (see http://dev.opencascade.org/index.php?q=home/resources for details) or unpack the source archive. 
   
-  Then create a WOK workbench (command *wcreate*) setting its Home to the directory, where the repository is created (<i>$CASROOT</i> variable). The workbench should have the same name as that directory. 
+  Then create a WOK workbench (command wcreate) setting its Home to the directory, where the repository is created ($CASROOT variable). The workbench should have the same name as that directory. 
   
-  For example, assuming that OCCT repository has been cloned into *D:/occt* folder: 
+  For example, assuming that OCCT repository has been cloned into D:/occt folder: 
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
   LOC:dev> wcreate occt -DHome=D:/occt
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-  Note that <i>$CASROOT</i> is equal to *D:/occt* now.
+  Note: $CASROOT is equal to D:/occt now
 
-  Then you can work with this workbench using normal WOK functionality (*wprocess, umake*, etc.; see @ref occt_dev_guides__wok "WOK User's Guide" for details) or use it only for generation of derived sources and project files, and build OCCT with Visual Studio on Windows or *make* command on Linux, as described below.
+  Then you can work with this workbench using normal WOK functionality (wprocess, umake, etc.; see WOK User's Guide for details) or use it only for generation of derived sources and project files, and build OCCT with Visual Studio on Windows or make command on Linux, as described below.
   
 @section wok3 Generation of building projects
 
-  Use command *wgenproj* in WOK to generate derived headers, source and building projects files: 
+  Use command wgenproj in WOK to generate derived headers, source and building projects files: 
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
   LOC:dev> wokcd occt
   LOC:dev:occt> wgenproj [ -target=<TARGET> ] [ -no_wprocess ]
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 TARGET:
-  * *vc8* - Visual Studio 2005;
-  * *vc9* - Visual Studio 2008;
-  * *vc10* - Visual Studio 2010;
-  * *vc11* - Visual Studio 2012;
-  * *cbp* - CodeBlocks;
-  * *cmake* - CMake;
-  * *amk* - AutoMake;
-  * *xcd* - Xcode;
-  * <i>-no_wprocess</i> option skips generation of derived headers and source files.
+  * vc8 - Visual Studio 2005
+  * vc9 - Visual Studio 2008
+  * vc10 - Visual Studio 2010
+  * vc11 - Visual Studio 2012
+  * cbp - CodeBlocks
+  * cmake - CMake
+  * amk - AutoMake
+  * xcd - Xcode
+-no_wprocess - skip generation of derived headers and source files
 
 Note that this command takes several minutes to complete at the first call. 
 
-Re-execute this step to generate derived headers, source and building projects files if some CDL files in OCCT have been modified (either by you directly, or due to updates in the repository). Note that in some cases WOK may fail to update correctly; in such case remove sub-directories *drv* and <i>.adm</i> and repeat the command. 
+Re-execute this step to generate derived headers, source and building projects files if some CDL files in OCCT have been modified (either by you directly, or due to updates in the repository). Note that in some cases WOK may fail to update correctly; in such case remove sub-directories drv and .adm and repeat the command. 
 
 To regenerate derived headers and source files without regeneration of projects use command:
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
   LOC:dev> wokcd occt
   LOC:dev:occt> wprocess -DGroups=Src,Xcpp
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The generated building project has been placed into <i>$CASROOT/adm</i> folder:
-  * for vc8 - <i>$CASROOT/adm/msvc/vc8</i>;
-  * for vc9 - <i>$CASROOT/adm/msvc/vc9</i>;
-  * for vc10 - <i>$CASROOT/adm/msvc/vc10</i>;
-  * for vc11 - <i>$CASROOT/adm/msvc/vc11</i>;
-  * for cbp - <i>$CASROOT/adm/\<OS\>/cbp</i>;
-  * for cmake - <i>$CASROOT/adm/cmake</i>;
-  * for amk - <i>$CASROOT/adm/lin/amk</i>;
-  * xcd - <i>$CASROOT/adm/\<OS\>/xcd</i>
+The generated building project has been placed into $CASROOT/adm folder:
+  * for vc8 - $CASROOT/adm/msvc/vc8
+  * for vc9 - $CASROOT/adm/msvc/vc9
+  * for vc10 - $CASROOT/adm/msvc/vc10
+  * for vc11 - $CASROOT/adm/msvc/vc11
+  * for cbp - $CASROOT/adm/\<OS\>/cbp
+  * for cmake - $CASROOT/adm/cmake
+  * for amk - $CASROOT/adm/lin/amk
+  * xcd - $CASROOT/adm/\<OS\>/xcd
 
 @section wok4  Generation of documentation
 
-  Use command *wgendoc* in WOK to generate reference documentation: 
+  Use command wgendoc in WOK to generate reference documentation: 
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.tcl}
   :LOC:dev> wokcd occt
   :LOC:dev:occt> wgendoc 
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 The following options can be used: 
-  * <i>-wb=\<workbench name\></i>  the name of OCCT workbench (the current one by default);
-  * <i>-m=\<list of modules\></i> the list of modules that will be contained in the documentation;
-  * <i>-outdir=\<path\></i> the output directory for the documentation;
-  * <i>-chm</i>  the option to generate CHM file;
-  * <i>-hhc=\<path\></i> the path to HTML Help Compiler *hhc.exe* or equivalent;
-  * <i>-qthelp=\<path\></i> the option to generate Qt Help file, where <i>\<path\></i> is the required path to *qthelpgenerator* executable;
-  * <i>-doxygen=\<path\></i> the path to Doxygen executable;
-  * <i>-dot=\<path\></i> the path to GraphViz dot executable.
+  * -wb=< workbench name >  the name of OCCT workbench (the current one by default);
+  * -m=< list of modules > the list of modules that will be contained in the documentation;
+  * -outdir=< path > the output directory for the documentation;
+  * -chm  the option to generate CHM file;
+  * -hhc=< path > the path to HTML Help Compiler (hhc.exe) or equivalent;
+  * -qthelp=< path > the option to generate Qt Help file, it is necessary to specify the path to qthelpgenerator executable;
+  * -doxygen=< path > the path to Doxygen executable
+  * -dot=< path > the path to GraphViz dot executable

dox/dev_guides/building/xcode.md

@@ -1,4 +1,4 @@
-Building with Xcode {#occt_dev_guides__building_xcode}
+Building with Xcode {#dev_guides__building__xcode}
 ===================
 
 This file describes steps to build OCCT libraries from complete source package
@@ -6,10 +6,10 @@ on Mac OS X with Xcode.
 
 If you are building OCCT from bare sources (as in Git repository), or do some 
 changes affecting CDL files, you need to use WOK to re-generate header files
-and build scripts / projects. See \ref occt_dev_guides__building_wok for instructions.
+and build scripts / projects. See \ref dev_guides__building__wok for instructions.
 
 Before building OCCT, you need to install required third-party libraries; see
-paragraph 1 of \ref occt_dev_guides__building for details.
+paragraph 1 of \ref dev_guides__building for details.
 
 1. Add paths to the mandatory 3rd-party products (Tcl/Tk and FreeType) 
    in file custom.sh located in \<OCCT_ROOT_DIR\>. For this:

dox/dev_guides/cdl/cdl.md

@@ -1,4 +1,4 @@
- Component Definition Language (CDL)  {#occt_dev_guides__cdl}
+ Component Definition Language (CDL)  {#dev_guides__cdl}
 ==============================
 
 @tableofcontents

dox/dev_guides/contribution/coding_rules.md

@@ -1,4 +1,4 @@
-Coding Rules {#occt_dev_guides__coding_rules}
+Coding Rules {#dev_guides__coding_rules}
 ======================================
 
 @tableofcontents
@@ -163,7 +163,7 @@ Standard_Integer myCounter; // This is preferred
 ### Names of global variables
 
 It is strongly recommended to avoid defining any global variables.
-However, as soon as a global variable is necessary, its name should be prefixed by the name of a class or a package where it is defined followed with <i>_my</i>.
+However, as soon as a global variable is necessary, its name should be prefixed by the name of a class or a package where it is defined followed with *_my*.
 
 See the following examples:
 
@@ -238,7 +238,7 @@ Prefer C++ style comments in C++ sources.
 
 ### Commenting out unused code
 
-Delete unused code instead of commenting it or using \#define.
+Delete unused code instead of commenting it or using #define.
 
 ### Indentation in sources [MANDATORY]
 
@@ -541,7 +541,7 @@ Use *private* fields if future extensions should be disabled.
 
 ### Constants and inlines over defines [MANDATORY]
 
-Use constant variables (const) and inline functions instead of defines (\#define).
+Use constant variables (const) and inline functions instead of defines (#define).
 
 ### Avoid explicit numerical values [MANDATORY]
 

dox/dev_guides/contribution_workflow/contribution_workflow.md

@@ -1,4 +1,4 @@
-Contribution Workflow {#occt_dev_guides__contribution_workflow}
+Contribution Workflow {#dev_guides__contribution_workflow}
 ====================================
 @tableofcontents 
 

dox/dev_guides/debug/debug.md

@@ -1,4 +1,4 @@
-Debugging tools and hints {#occt_dev_guides__debug}
+Debugging tools and hints {#dev_guides__debug}
 =========================
 
 @tableofcontents
@@ -27,7 +27,7 @@ Note that all these functions accept pointer to variable as <i>void*</i> to allo
 
 @subsection occt_debug_call_draw Interacting with DRAW
 
-Open CASCADE Test Harness or @ref occt_user_guides__test_harness "DRAW" provides an extensive set of tools for inspection and analysis of OCCT shapes and geometric objects and is mostly used as environment for prototyping and debugging OCCT-based algorithms.
+Open CASCADE Test Harness or @ref user_guides__test_harness "DRAW" provides an extensive set of tools for inspection and analysis of OCCT shapes and geometric objects and is mostly used as environment for prototyping and debugging OCCT-based algorithms.
 
 In some cases the objects to be inspected are available in DRAW as results of DRAW commands. In other cases, however, it is necessary to inspect intermediate objects created by the debugged algorithm. To support this, DRAW provides a set of commands allowing the developer to store intermediate objects directly from the debugger stopped at some point during the program execution (usually at a breakpoint).
 

dox/dev_guides/debug/occt.natvis

@@ -1,146 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<AutoVisualizer xmlns="http://schemas.microsoft.com/vstudio/debugger/natvis/2010">
-  <Type Name="gp_XY">
-    <DisplayString>[{(float)x} {(float)y}]</DisplayString>
-  </Type>
-  <Type Name="gp_Pnt2d">
-    <AlternativeType Name="gp_Vec2d"></AlternativeType>
-    <AlternativeType Name="gp_Dir2d"></AlternativeType>
-    <DisplayString>[{(float)cood.x} {(float)cood.y}]</DisplayString>
-  </Type>
-  <Type Name="gp_XYZ">
-    <DisplayString>[{(float)x} {(float)y} {(float)z}]</DisplayString>
-  </Type>
-  <Type Name="gp_Pnt">
-    <AlternativeType Name="gp_Vec"></AlternativeType>
-    <AlternativeType Name="gp_Dir"></AlternativeType>
-    <DisplayString>[{(float)coord.x} {(float)coord.y} {(float)coord.z}]</DisplayString>
-  </Type>
-  <Type Name="NCollection_Vec2&lt;*&gt;">
-    <DisplayString>[{v[0]} {v[1]}]</DisplayString>
-  </Type>
-  <Type Name="NCollection_Vec3&lt;*&gt;">
-    <DisplayString>[{v[0]} {v[1]} {v[2]}]</DisplayString>
-  </Type>
-  <Type Name="NCollection_Vec4&lt;*&gt;">
-    <DisplayString>[{v[0]} {v[1]} {v[2]} {v[3]}]</DisplayString>
-  </Type>
-  <Type Name="gp_Mat2d">
-    <DisplayString>
-      [{(float)matrix[0][0]} {(float)matrix[0][1]}], [{(float)matrix[1][0]} {(float)matrix[1][1]}]
-    </DisplayString>
-  </Type>
-  <Type Name="NCollection_Mat4&lt;*&gt;">
-    <Expand>
-      <Item Name="row0">((NCollection_Vec4&lt;$T1&gt;*)myMat)[0]</Item>
-      <Item Name="row1">((NCollection_Vec4&lt;$T1&gt;*)myMat)[1]</Item>
-      <Item Name="row2">((NCollection_Vec4&lt;$T1&gt;*)myMat)[2]</Item>
-      <Item Name="row3">((NCollection_Vec4&lt;$T1&gt;*)myMat)[3]</Item>
-    </Expand>
-  </Type>
-  <Type Name="Handle_Standard_Transient">
-    <DisplayString Condition="entity==0x00000000">NULL</DisplayString>
-    <DisplayString Condition="entity!=0x00000000">[count={entity->count}]</DisplayString>
-    <Expand>
-      <ExpandedItem>*entity</ExpandedItem>
-    </Expand>
-  </Type>
-  <Type Name="NCollection_Handle&lt;*&gt;">
-    <DisplayString Condition="entity==0x00000000">NULL</DisplayString>
-    <DisplayString Condition="entity!=0x00000000">[count={entity->count}]</DisplayString>
-    <Expand>
-      <ExpandedItem>*((NCollection_Handle&lt;$T1&gt;::Ptr*)entity)->myPtr</ExpandedItem>
-    </Expand>
-  </Type>
-  <Type Name="TCollection_AsciiString">
-    <DisplayString>{mylength}: {mystring,s}</DisplayString>
-  </Type>
-  <Type Name="TCollection_HAsciiString">
-    <DisplayString>{myString.mylength}: {myString.mystring,s}</DisplayString>
-  </Type>
-  <Type Name="NCollection_UtfString&lt;*&gt;">
-    <DisplayString>{myLength}: {myString,s}</DisplayString>
-  </Type>
-  <Type Name="TCollection_ExtendedString">
-    <DisplayString>{mylength}: {(wchar_t *)mystring,su}</DisplayString>
-  </Type>
-  <Type Name="TCollection_HExtendedString">
-    <DisplayString>{myString.mylength}: {(wchar_t *)myString.mystring,su}</DisplayString>
-  </Type>
-  <Type Name="TCollection_BaseSequence">
-    <DisplayString>TCollection_Sequence [{Size}], curr={CurrentIndex}</DisplayString>
-  </Type>
-  <Type Name="TCollection_BasicMap">
-    <AlternativeType Name="NCollection_BaseMap"/>
-    <DisplayString>TCollection_Map [{mySize}]</DisplayString>
-  </Type>
-  <Type Name="TColStd_PackedMapOfInteger">
-    <DisplayString>TColStd_PackedMapOfInteger [{myExtent}]</DisplayString>
-  </Type>
-  <Type Name="NCollection_Vector&lt;*&gt;">
-    <DisplayString>NCollection_Vector [{myLength}]</DisplayString>
-    <Expand>
-      <IndexListItems Condition="myData->Length&lt;myLength">
-        <Size>myData->Length</Size>
-        <ValueNode>*($T1*)((char*)myData->DataPtr + $i * myItemSize)</ValueNode>
-      </IndexListItems>
-      <IndexListItems Condition="myData->Length&gt;=myLength">
-        <Size>myLength</Size>
-        <ValueNode>*($T1*)((char*)myData->DataPtr + $i * myItemSize)</ValueNode>
-      </IndexListItems>
-    </Expand>
-  </Type>
-  <Type Name="NCollection_List&lt;*&gt;">
-    <DisplayString>NCollection_List [{myLength}]</DisplayString>
-    <Expand>
-      <LinkedListItems>
-        <Size>myLength</Size>
-        <HeadPointer>myFirst</HeadPointer>
-        <NextPointer>myNext</NextPointer>
-        <ValueNode>*($T1*)(sizeof(NCollection_ListNode) + ((char *)this))</ValueNode>
-      </LinkedListItems>
-    </Expand>
-  </Type>
-  <Type Name="Bnd_B2f">
-    <AlternativeType Name="Bnd_B2d"></AlternativeType>
-    <DisplayString Condition="myCenter[0] &gt; 1000000000000000000.">VOID</DisplayString>
-    <DisplayString Condition="myCenter[0] &lt; 1000000000000000000.">
-      Center: [{(float)myCenter[0]} {(float)myCenter[1]}], hSize: [{(float)myHSize[0]} {(float)myHSize[1]}]
-    </DisplayString>
-  </Type>
-  <Type Name="Bnd_B3f">
-    <AlternativeType Name="Bnd_B3d"></AlternativeType>
-    <DisplayString Condition="myCenter[0] &gt; 1000000000000000000.">VOID</DisplayString>
-    <DisplayString Condition="myCenter[0] &lt; 1000000000000000000.">
-      Center: [{(float)myCenter[0]} {(float)myCenter[1]} {(float)myCenter[2]}], hSize: [{(float)myHSize[0]} {(float)myHSize[1]} {(float)myHSize[2]}]
-    </DisplayString>
-  </Type>
-  <Type Name="TDF_Label">
-    <DisplayString Condition="myLabelNode==0">NULL</DisplayString>
-    <DisplayString Condition="myLabelNode!=0">[:{myLabelNode->myTag}]</DisplayString>
-    <Expand>
-      <ExpandedItem>*myLabelNode</ExpandedItem>
-    </Expand>
-  </Type>
-  <Type Name="TDF_LabelNode">
-    <DisplayString>[:{myTag}]</DisplayString>
-    <Expand>
-      <Item Name="brother" Condition="myBrother!=0">* myBrother</Item>
-      <Item Name="child" Condition="myFirstChild!=0">* myFirstChild</Item>
-      <ExpandedItem>myFirstAttribute</ExpandedItem>
-    </Expand>
-  </Type>
-  <Type Name="Handle_TDF_Attribute">
-    <DisplayString Condition="entity==0x00000000">NULL</DisplayString>
-    <DisplayString Condition="entity!=0x00000000">
-      [transaction={((TDF_Attribute*)entity)->myTransaction}]
-    </DisplayString>
-    <Expand>
-      <!--Item Name="next" Condition="myNext.entity!=0x00000000">myNext</Item-->
-      <ExpandedItem>(TDF_Attribute*)entity</ExpandedItem>
-    </Expand>
-  </Type>
-  <Type Name="OpenGl_Context">
-    <DisplayString>[{myGlVerMajor}.{myGlVerMinor}]</DisplayString>
-  </Type>
-</AutoVisualizer>

dox/dev_guides/dev_guides.md

@@ -3,16 +3,16 @@
 
 The following documents provide information on OCCT building, development and testing:
 
-* @subpage occt_dev_guides__building "Building OCCT from sources"
-* @subpage occt_dev_guides__documentation "Documentation system"
-* @subpage occt_dev_guides__coding_rules "Coding Rules"
-* @subpage occt_dev_guides__contribution_workflow "Contribution Workflow"
-* @subpage occt_dev_guides__git_guide "Guide to installing and using Git for OCCT development"
-* @subpage occt_dev_guides__tests "Automatic Testing system"
-* @subpage occt_dev_guides__debug "Debugging tools and hints"
+* @subpage dev_guides__building "Building OCCT from sources"
+* @subpage dev_guides__documentation "Documentation system"
+* @subpage dev_guides__coding_rules "Coding Rules"
+* @subpage dev_guides__contribution_workflow "Contribution Workflow"
+* @subpage dev_guides__git_guide "Guide to installing and using Git for OCCT development"
+* @subpage dev_guides__tests "Automatic Testing system"
+* @subpage dev_guides__debug "Debugging tools and hints"
 
 Two other documents provide details on obsolete technologies used by OCCT, 
 to be removed in future releases:
 
-* @subpage occt_dev_guides__wok "Workshop Organization Kit (WOK)"
-* @subpage occt_dev_guides__cdl "Component Definition Language (CDL)"
+* @subpage dev_guides__wok "Workshop Organization Kit (WOK)"
+* @subpage dev_guides__cdl "Component Definition Language (CDL)"

dox/dev_guides/documentation/documentation.md

@@ -1,4 +1,4 @@
- Documentation System {#occt_dev_guides__documentation}
+ Documentation System {#dev_guides__documentation}
 ======================
 
 @tableofcontents
@@ -17,9 +17,6 @@ Version 8.5 or 8.6: http://www.tcl.tk/software/tcltk/download.html
 **Doxygen**
 Version 1.8.4 or above: http://www.stack.nl/~dimitri/doxygen/download.html
 
-**Dot**
-Part of Graphviz software, used by Doxygen for generation of class diagrams in Reference Manual: http://www.graphviz.org/Download..php
-
 **MiKTeX** or other package providing **pdflatex** command (only needed for generation of PDF documents): http://miktex.org/download
 
 **Inkscape** (only needed for generation of PDF documents containing SVG images): http://www.inkscape.org/download
@@ -43,52 +40,40 @@ See \ref OCCT_DM_SECTION_A_9 for more details on inserting mathematical expressi
 
 @section OCCT_DM_SECTION_2_1 Documentation Generation
 
-Run command *gendoc* from command prompt (with OCCT directory as current one) to generate OCCT documentation.
-The synopsis is:
+Run *gendoc.bat* from OCCT directory to generate all documents defined in *FILES.txt*:
 
-    gendoc \[-h\] {-refman|-overview} \[-html|-pdf|-chm\] \[-m=<list of modules>|-ug=<list of docs>\] \[-v\] \[-s=<search_mode>\] \[-mathjax=<path>\]
-	
-Here the options are:
+*gendoc.bat* can be started with the following options:
 
-* Choice of documentation to be generated:
-  * <i>-overview</i>: To generate Overview and User Guides (cannot be used with -refman)
-  * <i>-refman</i>: To generate class Reference Manual (cannot be used with -overview)
+  * <i>-html</i>                : Generates HTML files (cannot be used with -pdf);
+  * <i>-pdf</i>                 : Generates PDF files (cannot be used with -html);
+  * <i>-m=\<modules_list\></i>  : Specifies the list of documents to generate. If it is not specified, all files mentioned in *FILES.txt* are processed;
+  * <i>-l=\<document_name\></i> : Specifies the output document title;
+  * <i>-mathjax=\<path\></i>    : Specifies the path to a non-default location of MathJAX;
+  * <i>-h</i>                   : Prints a help message;
+  * <i>-v</i>                   : Toggles the Verbose mode (info on all script actions is shown).
 
-* Choice of output format:
-  * <i>-html</i>: To generate HTML files (default, cannot be used with -pdf or -chm)
-  * <i>-pdf</i>: To generate PDF files (cannot be used with -refman, -html, or -chm)
-  * <i>-chm</i>: To generate CHM files (cannot be used with -html or -pdf)
-
-* Additional options:
-  * <i>-m=\<modules_list\></i>: List of OCCT modules (separated with comma), for generation of Reference Manual
-  * <i>-ug=\<docs_list\></i>: List of MarkDown documents (separated with comma), to use for generation of Overview / User Guides
-  * <i>-mathjax=\<path\></i>: To use local or alternative copy of MathJax
-  * <i>-s=\<search_mode\></i>: Specifies the Search mode of HTML documents; can be: none | local | server | external
-  * <i>-h</i>: Prints this help message
-  * <i>-v</i>: Enables more verbose output
+If you run the command without arguments (like in the example above) it will generate HTML documentation for all documents defined in *FILES.txt*.
 
 **Note**
 
-* In case of PDF output the utility generates a separate PDF file for each document;
-* In case of HTML output the utility generates a common Table of contents containing references to all documents.
-* In case of CHM output single CHM file is generated
-
-**Examples**
+* In case of a PDF output the utility generates a separate PDF file for each document;
+* In case of an HTML output the utility generates a common Table of contents containing references to all documents.
 
 To generate the output for a specific document specify the path to the corresponding MarkDown file (paths relative to *dox* sub-folder can be given), for instance:
 
 ~~~~
-    > gendoc -overview -ug=dev_guides/documentation/documentation.md
+    % gendoc.bat -html -m=dev_guides/documentation/documentation.md
 ~~~~
 
-To generate Reference Manual for the whole Open CASCADE Technology library, run: 
+Multiple files can be separated with commas:
 ~~~~
-    > gendoc -refman
+    % gendoc.bat -html -m=MD_FILE_1,MD_FILE_2
 ~~~~
 
-To generate Reference Manual for Foundation Classes and Modeling Data modules only, with search option, run:
+Use quotes to specify an article name with <i>-l</i> option, which helps to prevent incorrect interpretation of white spaces:
+
 ~~~~
-    > gendoc -refman -m=FoundationClasses,ModelingData,ModelingAlgorithms -s=local
+    % gendoc.bat -pdf -m=MD_FILE_1 -l="Label of MD_FILE_1 document"
 ~~~~
 
 @section  OCCT_DM_SECTION_3 Documentation Conventions

dox/dev_guides/git_guide/git_guide.md

@@ -1,4 +1,4 @@
-Guide to installing and using Git for OCCT development {#occt_dev_guides__git_guide}
+Guide to installing and using Git for OCCT development {#dev_guides__git_guide}
 =================================
 
 @tableofcontents 
@@ -121,7 +121,7 @@ The official repository contains:
   If you prefer to work with the English interface, remove or rename .msg localization file 
   in subdirectories *share/git-gui/lib/msgs* and *share/gitk/lib/msgs* of the Git installation directory.
   
-  Before the first commit to the OCCT repository, make sure that your User Name in the Git configuration file (file <i>.gitconfig</i> in the <i>$HOME</i> directory) is equal to your username on the OCCT development portal. 
+  Before the first commit to the OCCT repository, make sure that your User Name in the Git configuration file (file *.gitconfig* in the $HOME directory) is equal to your username on the OCCT development portal. 
 
 @subsubsection occt_gitguide_2_1_2 Installation and configuration of TortoiseGit
 
@@ -150,14 +150,14 @@ The official repository contains:
 
   * After the installation  select Start -> Programs -> TortoiseGit Settings to configure TortoiseGit.
   
-  Select Git->Config to add your user name and Email address to the local <i>.gitconfig</i> file
+  Select Git->Config to add your user name and Email address to the local .gitconfig file
   
   @image html OCCT_GitGuide_V2_image006.png
   @image latex OCCT_GitGuide_V2_image006.png
 
 @subsection occt_gitguide_2_2 Linux platform
 
-  We assume that Linux users have Git already installed and available in the *PATH*.
+  We assume that Linux users have Git already installed and available in the PATH.
   
   Make sure to configure Git so that the user name is equal to your username 
   on the OCCT development portal, and set SafeCrLf option to true:
@@ -190,7 +190,7 @@ The official repository contains:
   
   It is highly recommended to use the tools that come 
   with the chosen Git client for generation of SSH keys. 
-  Using incompatible tools (e.g. *ssh-keygen.exe* from Cygwin for code generation, 
+  Using incompatible tools (e.g. ssh-keygen.exe from Cygwin for code generation, 
   and TortoiseGit GUI with a default Putty client for connection to server) 
   may lead to authentication problems.
 
@@ -201,8 +201,8 @@ The official repository contains:
   Use this option if you have installed TortoiseGit (or other GUI Git client on Windows) 
   and have chosen “TortoisePLink” (or other Putty client) as SSH client during installation.
   
-  To generate the key with this client, run **Puttygen** (e.g. from Start menu -> TortoiseGit -> Puttygen), 
-  then click **Generate** and move mouse cursor over the blank area until the key is generated. 
+  To generate the key with this client, run Puttygen (e.g. from Start menu -> TortoiseGit -> Puttygen), 
+  then click Generate and move mouse cursor over the blank area until the key is generated. 
   
 @image html OCCT_GitGuide_V2_image007.png "Putty key generator"
 @image latex OCCT_GitGuide_V2_image007.png "Putty key generator"
@@ -221,7 +221,7 @@ The official repository contains:
   during installation of TortoiseGit (or other Windows tool).
   
   Make sure that you have *ssh* and *ssh-keygen* commands in the path. 
-  On Windows, you might need to start **Git Bash** command prompt window.
+  On Windows, you might need to start 'Git Bash' command prompt window provided by Git for Windows.
   
   Use the following command to generate SSH keys:
 ~~~~~  
@@ -230,14 +230,14 @@ The official repository contains:
 
   The last argument is an optional comment, which can be included with the public key and used to distinguish between different keys (if you have many).  The common practice is to put here your mail address or workstation name.
   
-  The command will ask you where to store the keys. It is recommended to accept the default path <i>$HOME/.ssh/id_rsa</i>. Just press **Enter** for that. You will be warned if a key is already present in the specified file; you can either overwrite it by the new one, or stop generation and use the old key.
+  The command will ask you where to store the keys. It is recommended to accept the default path *$HOME/.ssh/id_rsa*. Just press Enter for that. You will be warned if a key is already present in the specified file; you can either overwrite it by the new one, or stop generation and use the old key.
     
   If you want to be on the safe side, enter password to encrypt the private key. You will be asked to enter this password each time you use that key (e.g. access a remote Git repository), unless you use the tool that caches the key (like TortoiseGit). If you do not want to bother, enter an empty string.  
   
   On Windows, make sure to note the complete path to the generated files (the location of your $HOME might be not obvious). Two key files will be created in the specified location (by default in $HOME/.ssh/):
   
   * *id_rsa* - private key
-  * *id_rsa.pub* - public key
+  * id_rsa.pub - public key
   
   The content of the public key file (one text line) is the key to be added to the user account on the site (see below).
 
@@ -265,7 +265,7 @@ Click on that tab, then click **Add a public key**, and paste the text of the pu
   to update the configuration after the new key is added. 
   After that time, you can try accessing Git.
 
-@section occt_gitguide_4 Work with repository: developer operations
+@section occt_gitguide_4 WORK WITH REPOSITORY: DEVELOPER OPERATIONS
 
 @subsection occt_gitguide_4_1 General workflow
 
@@ -307,7 +307,7 @@ Click on that tab, then click **Add a public key**, and paste the text of the pu
     > git clone gitolite@git.dev.opencascade.org:occt <path>
 ~~~~~
 
-  where <i>\<path\></i> is the path to the new folder which will be created for the repository.
+  where <i><path></i> is the path to the new folder which will be created for the repository.
     
   * In TortoiseGit: create a new folder, open it and right-click in the Explorer window, then choose **Git Clone** in the context menu:
  
@@ -504,7 +504,7 @@ Rebasing is a good occasion to clean-up the history of commits in the branch. Co
   
 To rebase your branch into a single commit, you need to do the following:
   * Switch to your branch (e.g. “CR12345”)
-  * In TortoiseGit history log, select a branch to rebase on <i>(remotes/origin/master)</i> and in the context menu choose **Rebase “CR12345” onto this**.
+  * In TortoiseGit history log, select a branch to rebase on *(remotes/origin/master)* and in the context menu choose **Rebase “CR12345” onto this**.
   * In the **Rebase** dialog, check **Squash All**.  You can also change the order of commits and define for each commit whether it should be kept (**Pick**), edited, or just skipped.
   
 @image html OCCT_GitGuide_V2_image023.png

dox/dev_guides/tests/tests.md

@@ -1,4 +1,4 @@
- Automated Testing System  {#occt_dev_guides__tests}
+ Automated Testing System  {#dev_guides__tests}
 ======================================
 
 @tableofcontents
@@ -11,7 +11,7 @@ Reading the Introduction is sufficient for OCCT developers to use the test syste
 
 @subsection testmanual_1_1 Basic Information
 
-OCCT automatic testing system is organized around DRAW Test Harness @ref occt_user_guides__test_harness "DRAW Test Harness", a console application based on Tcl (a scripting language) interpreter extended by OCCT-related commands.
+OCCT automatic testing system is organized around DRAW Test Harness @ref user_guides__test_harness "DRAW Test Harness", a console application based on Tcl (a scripting language) interpreter extended by OCCT-related commands.
 
 Standard OCCT tests are included with OCCT sources and are located in subdirectory *tests* of the OCCT root folder. Other test folders can be included in the test system, e.g. for testing applications based on OCCT.
 
@@ -58,7 +58,7 @@ return ;# this is to avoid an echo of the last command above in cout
 Note that variable *CSF_TestDataPath* is set to default value at DRAW start, pointing at the folder <i>$CASROOT/data</i>. 
 In this example, subdirectory <i>d:/occt/test-data</i> is added to this path. Similar code could be used on Linux and Mac OS X except that on non-Windows platforms colon ‘:’ should be used as path separator instead of semicolon ‘;’.
 
-All tests are run from DRAW command prompt (run *draw.tcl* or *draw.sh* to start it).
+All tests are run from DRAW command prompt (run *draw.tcl* or *draw.sh *to start it).
 
 @subsubsection testmanual_1_3_2 Running Tests
 
@@ -270,9 +270,9 @@ Example:
     if { [isdraw result] } {
         checkshape result
     } else {
-        puts "Error: The result shape can not be built"
+        puts *Error: The result shape can not be built*
     }
-    puts "TEST COMPLETED"
+    puts *TEST COMPLETED*
 ~~~~~
 
 @subsubsection testmanual_2_2_5 File "parse.rules"
@@ -602,7 +602,7 @@ Note that on older versions of OCCT the tests are run in compatibility mode and
 
 You can extend the test system by adding your own tests. For that it is necessary to add paths to the directory where these tests are located, and one or more additional data directories, to the environment variables *CSF_TestScriptsPath* and *CSF_TestDataPath*. The recommended way for doing this is using DRAW configuration file *DrawAppliInit* located in the directory which is current by the moment of DRAW start-up.
 
-Use Tcl command <i>_path_separator</i> to insert a platform-dependent separator to the path list.
+Use Tcl command *_path_separator* to insert a platform-dependent separator to the path list.
 
 For example:
 ~~~~~
@@ -631,12 +631,12 @@ testdiff dir1 dir2 [groupname [gridname]] [options...]
 Here *dir1* and *dir2* are directories containing logs of two test runs.
 
 Possible options are:
-* <i>-save \<filename\> </i> - saves the resulting log in a specified file (<i>$dir1/diff-$dir2.log</i> by default). HTML log is saved with the same name and extension .html;
+* <i>-save <filename> </i> - saves the resulting log in a specified file (<i>$dir1/diff-$dir2.log</i> by default). HTML log is saved with the same name and extension .html;
 * <i>-status {same|ok|all}</i> - allows filtering compared cases by their status:
 	* *same* - only cases with same status are compared (default);
 	* *ok*   - only cases with OK status in both logs are compared;
 	* *all*  - results are compared regardless of status;
-* <i>-verbose \<level\> </i> - defines the scope of output data:
+* <i>-verbose <level> </i> - defines the scope of output data:
 	* 1 - outputs only differences;
 	* 2 - additionally outputs the list of logs and directories present in one of directories only;
 	* 3 - (by default) additionally outputs progress messages;
@@ -825,7 +825,7 @@ DRAW module: XSDRAW
 
 @subsubsection testmanual_5_1_11 mesh
 
-This group allows testing shape tessellation (*BRepMesh*) and shading.
+This group allows testing shape tessellation (*BRepMesh)) and shading.
 
 DRAW modules: MODELING (package *MeshTest*), VISUALIZATION (package *ViewerTest*)
 

dox/license.md

@@ -1,521 +0,0 @@
-License {#occt_public_license}
-=======
-
-Open CASCADE Technology is available under GNU Lesser General Public License 
-(LGPL) version 2.1 with additional exception.
-
-@section license_lgpl_21 GNU LESSER GENERAL PUBLIC LICENSE
-
-    Version 2.1, February 1999
-
-    Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-    51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-    Everyone is permitted to copy and distribute verbatim copies
-    of this license document, but changing it is not allowed.
-
-    [This is the first released version of the Lesser GPL.  It also counts
-    as the successor of the GNU Library Public License, version 2, hence
-    the version number 2.1.]
-
-### Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-### TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
--  0. This License Agreement applies to any software library or other
-   program which contains a notice placed by the copyright holder or
-   other authorized party saying it may be distributed under the terms of
-   this Lesser General Public License (also called "this License").
-   Each licensee is addressed as "you".
-
-   A "library" means a collection of software functions and/or data
-   prepared so as to be conveniently linked with application programs
-   (which use some of those functions and data) to form executables.
-
-   The "Library", below, refers to any such software library or work
-   which has been distributed under these terms.  A "work based on the
-   Library" means either the Library or any derivative work under
-   copyright law: that is to say, a work containing the Library or a
-   portion of it, either verbatim or with modifications and/or translated
-   straightforwardly into another language.  (Hereinafter, translation is
-   included without limitation in the term "modification".)
-
-   "Source code" for a work means the preferred form of the work for
-   making modifications to it.  For a library, complete source code means
-   all the source code for all modules it contains, plus any associated
-   interface definition files, plus the scripts used to control compilation
-   and installation of the library.
-
-   Activities other than copying, distribution and modification are not
-   covered by this License; they are outside its scope.  The act of
-   running a program using the Library is not restricted, and output from
-   such a program is covered only if its contents constitute a work based
-   on the Library (independent of the use of the Library in a tool for
-   writing it).  Whether that is true depends on what the Library does
-   and what the program that uses the Library does.
-  
-1. You may copy and distribute verbatim copies of the Library's
-   complete source code as you receive it, in any medium, provided that
-   you conspicuously and appropriately publish on each copy an
-   appropriate copyright notice and disclaimer of warranty; keep intact
-   all the notices that refer to this License and to the absence of any
-   warranty; and distribute a copy of this License along with the
-   Library.
-
-   You may charge a fee for the physical act of transferring a copy,
-   and you may at your option offer warranty protection in exchange for a
-   fee.
-
-2. You may modify your copy or copies of the Library or any portion
-   of it, thus forming a work based on the Library, and copy and
-   distribute such modifications or work under the terms of Section 1
-   above, provided that you also meet all of these conditions:
-
-   1. The modified work must itself be a software library.
-
-   2. You must cause the files modified to carry prominent notices
-      stating that you changed the files and the date of any change.
-
-   3. You must cause the whole of the work to be licensed at no
-      charge to all third parties under the terms of this License.
-
-   4. If a facility in the modified Library refers to a function or a
-      table of data to be supplied by an application program that uses
-      the facility, other than as an argument passed when the facility
-      is invoked, then you must make a good faith effort to ensure that,
-      in the event an application does not supply such function or
-      table, the facility still operates, and performs whatever part of
-      its purpose remains meaningful.
-
-      (For example, a function in a library to compute square roots has
-      a purpose that is entirely well-defined independent of the
-      application.  Therefore, Subsection 2d requires that any
-      application-supplied function or table used by this function must
-      be optional: if the application does not supply it, the square
-      root function must still compute square roots.)
-
-   These requirements apply to the modified work as a whole.  If
-   identifiable sections of that work are not derived from the Library,
-   and can be reasonably considered independent and separate works in
-   themselves, then this License, and its terms, do not apply to those
-   sections when you distribute them as separate works.  But when you
-   distribute the same sections as part of a whole which is a work based
-   on the Library, the distribution of the whole must be on the terms of
-   this License, whose permissions for other licensees extend to the
-   entire whole, and thus to each and every part regardless of who wrote
-   it.
-
-   Thus, it is not the intent of this section to claim rights or contest
-   your rights to work written entirely by you; rather, the intent is to
-   exercise the right to control the distribution of derivative or
-   collective works based on the Library.
-
-   In addition, mere aggregation of another work not based on the Library
-   with the Library (or with a work based on the Library) on a volume of
-   a storage or distribution medium does not bring the other work under
-   the scope of this License.
-
-3. You may opt to apply the terms of the ordinary GNU General Public
-   License instead of this License to a given copy of the Library.  To do
-   this, you must alter all the notices that refer to this License, so
-   that they refer to the ordinary GNU General Public License, version 2,
-   instead of to this License.  (If a newer version than version 2 of the
-   ordinary GNU General Public License has appeared, then you can specify
-   that version instead if you wish.)  Do not make any other change in
-   these notices.
-
-   Once this change is made in a given copy, it is irreversible for
-   that copy, so the ordinary GNU General Public License applies to all
-   subsequent copies and derivative works made from that copy.
-
-   This option is useful when you wish to copy part of the code of
-   the Library into a program that is not a library.
-
-4. You may copy and distribute the Library (or a portion or
-   derivative of it, under Section 2) in object code or executable form
-   under the terms of Sections 1 and 2 above provided that you accompany
-   it with the complete corresponding machine-readable source code, which
-   must be distributed under the terms of Sections 1 and 2 above on a
-   medium customarily used for software interchange.
-
-   If distribution of object code is made by offering access to copy
-   from a designated place, then offering equivalent access to copy the
-   source code from the same place satisfies the requirement to
-   distribute the source code, even though third parties are not
-   compelled to copy the source along with the object code.
-
-5. A program that contains no derivative of any portion of the
-   Library, but is designed to work with the Library by being compiled or
-   linked with it, is called a "work that uses the Library".  Such a
-   work, in isolation, is not a derivative work of the Library, and
-   therefore falls outside the scope of this License.
-
-   However, linking a "work that uses the Library" with the Library
-   creates an executable that is a derivative of the Library (because it
-   contains portions of the Library), rather than a "work that uses the
-   library".  The executable is therefore covered by this License.
-   Section 6 states terms for distribution of such executables.
-
-   When a "work that uses the Library" uses material from a header file
-   that is part of the Library, the object code for the work may be a
-   derivative work of the Library even though the source code is not.
-   Whether this is true is especially significant if the work can be
-   linked without the Library, or if the work is itself a library.  The
-   threshold for this to be true is not precisely defined by law.
-
-   If such an object file uses only numerical parameters, data
-   structure layouts and accessors, and small macros and small inline
-   functions (ten lines or less in length), then the use of the object
-   file is unrestricted, regardless of whether it is legally a derivative
-   work.  (Executables containing this object code plus portions of the
-   Library will still fall under Section 6.)
-
-   Otherwise, if the work is a derivative of the Library, you may
-   distribute the object code for the work under the terms of Section 6.
-   Any executables containing that work also fall under Section 6,
-   whether or not they are linked directly with the Library itself.
-
-6. As an exception to the Sections above, you may also combine or
-   link a "work that uses the Library" with the Library to produce a
-   work containing portions of the Library, and distribute that work
-   under terms of your choice, provided that the terms permit
-   modification of the work for the customer's own use and reverse
-   engineering for debugging such modifications.
-
-   You must give prominent notice with each copy of the work that the
-   Library is used in it and that the Library and its use are covered by
-   this License.  You must supply a copy of this License.  If the work
-   during execution displays copyright notices, you must include the
-   copyright notice for the Library among them, as well as a reference
-   directing the user to the copy of this License.  Also, you must do one
-   of these things:
-
-   1. Accompany the work with the complete corresponding
-      machine-readable source code for the Library including whatever
-      changes were used in the work (which must be distributed under
-      Sections 1 and 2 above); and, if the work is an executable linked
-      with the Library, with the complete machine-readable "work that
-      uses the Library", as object code and/or source code, so that the
-      user can modify the Library and then relink to produce a modified
-      executable containing the modified Library.  (It is understood
-      that the user who changes the contents of definitions files in the
-      Library will not necessarily be able to recompile the application
-      to use the modified definitions.)
-
-   2. Use a suitable shared library mechanism for linking with the
-      Library.  A suitable mechanism is one that (1) uses at run time a
-      copy of the library already present on the user's computer system,
-      rather than copying library functions into the executable, and (2)
-      will operate properly with a modified version of the library, if
-      the user installs one, as long as the modified version is
-      interface-compatible with the version that the work was made with.
-
-   3. Accompany the work with a written offer, valid for at
-      least three years, to give the same user the materials
-      specified in Subsection 6a, above, for a charge no more
-      than the cost of performing this distribution.
-
-   4. If distribution of the work is made by offering access to copy
-      from a designated place, offer equivalent access to copy the above
-      specified materials from the same place.
-
-   5. Verify that the user has already received a copy of these
-      materials or that you have already sent this user a copy.
-
-   For an executable, the required form of the "work that uses the
-   Library" must include any data and utility programs needed for
-   reproducing the executable from it.  However, as a special exception,
-   the materials to be distributed need not include anything that is
-   normally distributed (in either source or binary form) with the major
-   components (compiler, kernel, and so on) of the operating system on
-   which the executable runs, unless that component itself accompanies
-   the executable.
-
-   It may happen that this requirement contradicts the license
-   restrictions of other proprietary libraries that do not normally
-   accompany the operating system.  Such a contradiction means you cannot
-   use both them and the Library together in an executable that you
-   distribute.
-
-7. You may place library facilities that are a work based on the
-   Library side-by-side in a single library together with other library
-   facilities not covered by this License, and distribute such a combined
-   library, provided that the separate distribution of the work based on
-   the Library and of the other library facilities is otherwise
-   permitted, and provided that you do these two things:
-
-   1. Accompany the combined library with a copy of the same work
-      based on the Library, uncombined with any other library
-      facilities.  This must be distributed under the terms of the
-      Sections above.
-
-   2. Give prominent notice with the combined library of the fact
-      that part of it is a work based on the Library, and explaining
-      where to find the accompanying uncombined form of the same work.
-
-8. You may not copy, modify, sublicense, link with, or distribute
-   the Library except as expressly provided under this License.  Any
-   attempt otherwise to copy, modify, sublicense, link with, or
-   distribute the Library is void, and will automatically terminate your
-   rights under this License.  However, parties who have received copies,
-   or rights, from you under this License will not have their licenses
-   terminated so long as such parties remain in full compliance.
-
-9. You are not required to accept this License, since you have not
-   signed it.  However, nothing else grants you permission to modify or
-   distribute the Library or its derivative works.  These actions are
-   prohibited by law if you do not accept this License.  Therefore, by
-   modifying or distributing the Library (or any work based on the
-   Library), you indicate your acceptance of this License to do so, and
-   all its terms and conditions for copying, distributing or modifying
-   the Library or works based on it.
-
-10. Each time you redistribute the Library (or any work based on the
-   Library), the recipient automatically receives a license from the
-   original licensor to copy, distribute, link with or modify the Library
-   subject to these terms and conditions.  You may not impose any further
-   restrictions on the recipients' exercise of the rights granted herein.
-   You are not responsible for enforcing compliance by third parties with
-   this License.
-
-11. If, as a consequence of a court judgment or allegation of patent
-   infringement or for any other reason (not limited to patent issues),
-   conditions are imposed on you (whether by court order, agreement or
-   otherwise) that contradict the conditions of this License, they do not
-   excuse you from the conditions of this License.  If you cannot
-   distribute so as to satisfy simultaneously your obligations under this
-   License and any other pertinent obligations, then as a consequence you
-   may not distribute the Library at all.  For example, if a patent
-   license would not permit royalty-free redistribution of the Library by
-   all those who receive copies directly or indirectly through you, then
-   the only way you could satisfy both it and this License would be to
-   refrain entirely from distribution of the Library.
-
-   If any portion of this section is held invalid or unenforceable under any
-   particular circumstance, the balance of the section is intended to apply,
-   and the section as a whole is intended to apply in other circumstances.
-
-   It is not the purpose of this section to induce you to infringe any
-   patents or other property right claims or to contest validity of any
-   such claims; this section has the sole purpose of protecting the
-   integrity of the free software distribution system which is
-   implemented by public license practices.  Many people have made
-   generous contributions to the wide range of software distributed
-   through that system in reliance on consistent application of that
-   system; it is up to the author/donor to decide if he or she is willing
-   to distribute software through any other system and a licensee cannot
-   impose that choice.
-
-   This section is intended to make thoroughly clear what is believed to
-   be a consequence of the rest of this License.
-
-12. If the distribution and/or use of the Library is restricted in
-   certain countries either by patents or by copyrighted interfaces, the
-   original copyright holder who places the Library under this License may add
-   an explicit geographical distribution limitation excluding those countries,
-   so that distribution is permitted only in or among countries not thus
-   excluded.  In such case, this License incorporates the limitation as if
-   written in the body of this License.
-
-13. The Free Software Foundation may publish revised and/or new
-   versions of the Lesser General Public License from time to time.
-   Such new versions will be similar in spirit to the present version,
-   but may differ in detail to address new problems or concerns.
-
-   Each version is given a distinguishing version number.  If the Library
-   specifies a version number of this License which applies to it and
-   "any later version", you have the option of following the terms and
-   conditions either of that version or of any later version published by
-   the Free Software Foundation.  If the Library does not specify a
-   license version number, you may choose any version ever published by
-   the Free Software Foundation.
-
-14. If you wish to incorporate parts of the Library into other free
-   programs whose distribution conditions are incompatible with these,
-   write to the author to ask for permission.  For software which is
-   copyrighted by the Free Software Foundation, write to the Free
-   Software Foundation; we sometimes make exceptions for this.  Our
-   decision will be guided by the two goals of preserving the free status
-   of all derivatives of our free software and of promoting the sharing
-   and reuse of software generally.
-
-   **NO** **WARRANTY**
-
-15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-   WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-   EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-   OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-   KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-   PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-   LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-   THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-   WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-   AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-   FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-   CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-   LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-   RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-   FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-   SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-   DAMAGES.
-
-### END OF TERMS AND CONDITIONS
-
-### How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-    Yoyodyne, Inc., hereby disclaims all copyright interest in the
-    library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-    <signature of Ty Coon>, 1 April 1990
-    Ty Coon, President of Vice
-
-That's all there is to it!
-
-@section occt_lgpl_exception OPEN CASCADE EXCEPTION
-
-### Open CASCADE Exception (version 1.0) to GNU LGPL version 2.1.
-
-The object code (i.e. not a source) form of a "work that uses the Library"
-can incorporate material from a header file that is part of the Library.
-As a special exception to the GNU Lesser General Public License version 2.1,
-you may distribute such object code incorporating material from header files
-provided with the Open CASCADE Technology libraries (including code of CDL
-generic classes) under terms of your choice, provided that you give
-prominent notice in supporting documentation to this code that it makes use
-of or is based on facilities provided by the Open CASCADE Technology software.

dox/occdoc.tcl

@@ -0,0 +1,875 @@
+# -----------------------------------------------------------------------
+#  Script name: CompileDocs.tcl
+#  This script compiles OCCT documents from *.md files to HTML pages
+#  Author: omy
+# -----------------------------------------------------------------------
+
+# get OCCT version from file Standard_Version.hxx (if available)
+proc OverviewDoc_DetectCasVersion {theCasRoot} {
+  set occt_ver 6.7.0
+  set occt_ver_add ""
+  if { [file exist $theCasRoot/src/Standard/Standard_Version.hxx] } {
+    set fh [open $theCasRoot/src/Standard/Standard_Version.hxx]
+    set fh_loaded [read $fh]
+    close $fh
+    regexp {[^/]\s*#\s*define\s+OCC_VERSION_COMPLETE\s+\"([^\s]*)\"} $fh_loaded dummy occt_ver
+    regexp {[^/]\s*#\s*define\s+OCC_VERSION_DEVELOPMENT\s+\"([^\s]*)\"} $fh_loaded dummy occt_ver_add
+    if { "$occt_ver_add" != "" } { set occt_ver ${occt_ver}.$occt_ver_add }
+  }
+  return $occt_ver
+}
+
+# Generates Doxygen configuration file for Overview documentation
+proc OverviewDoc_MakeDoxyfile {casDir outDir tagFileDir {doxyFileName} {generatorMode ""} DocFilesList verboseMode searchMode hhcPath mathjaxLocation} {
+
+    set doxyFile [open $doxyFileName "w"]
+    set casroot  $casDir
+    set inputDir $casDir/dox
+
+    # Common configs
+    puts $doxyFile "DOXYFILE_ENCODING      = UTF-8"
+    puts $doxyFile "PROJECT_NAME           = \"Open CASCADE Technology\""
+    puts $doxyFile "PROJECT_NUMBER         = [OverviewDoc_DetectCasVersion $casDir]"
+    puts $doxyFile "PROJECT_BRIEF          = "
+    puts $doxyFile "PROJECT_LOGO           = $inputDir/resources/occ_logo.png"
+
+    puts $doxyFile "OUTPUT_DIRECTORY       = $outDir"
+    puts $doxyFile "CREATE_SUBDIRS         = NO"
+    puts $doxyFile "OUTPUT_LANGUAGE        = English"
+    puts $doxyFile "ABBREVIATE_BRIEF       = \"The \$name class\" \
+                                             \"The \$name widget\" \
+                                             \"The \$name file\" \
+                                             is \
+                                             provides \
+                                             specifies \
+                                             contains \
+                                             represents \
+                                             a \
+                                             an \
+                                             the"
+
+    puts $doxyFile "FULL_PATH_NAMES        = YES"
+    puts $doxyFile "INHERIT_DOCS           = YES"
+    puts $doxyFile "TAB_SIZE               = 4"
+    puts $doxyFile "MARKDOWN_SUPPORT       = YES"
+    puts $doxyFile "EXTRACT_ALL            = YES"
+    puts $doxyFile "CASE_SENSE_NAMES       = NO"
+    puts $doxyFile "INLINE_INFO            = YES"
+    puts $doxyFile "SORT_MEMBER_DOCS       = YES"
+    puts $doxyFile "WARNINGS               = YES"
+    puts $doxyFile "WARN_IF_UNDOCUMENTED   = YES"
+    puts $doxyFile "WARN_IF_DOC_ERROR      = YES"
+    puts $doxyFile "WARN_NO_PARAMDOC       = NO"
+    puts $doxyFile "WARN_FORMAT            = \"\$file:\$line: \$text\""
+    puts $doxyFile "INPUT_ENCODING         = UTF-8"
+    puts $doxyFile "FILE_PATTERNS          = *.md *.dox "
+    puts $doxyFile "RECURSIVE              = YES"
+    puts $doxyFile "SOURCE_BROWSER         = NO"
+    puts $doxyFile "INLINE_SOURCES         = YES"
+    puts $doxyFile "COLS_IN_ALPHA_INDEX    = 5"
+    
+    # Generation options
+    puts $doxyFile "GENERATE_DOCSET        = NO"
+    puts $doxyFile "GENERATE_CHI           = NO"
+    puts $doxyFile "GENERATE_QHP           = NO"
+    puts $doxyFile "GENERATE_ECLIPSEHELP   = NO"
+    puts $doxyFile "GENERATE_RTF           = NO"
+    puts $doxyFile "GENERATE_MAN           = NO"
+    puts $doxyFile "GENERATE_XML           = NO"
+    puts $doxyFile "GENERATE_DOCBOOK       = NO"
+    puts $doxyFile "GENERATE_AUTOGEN_DEF   = NO"
+    puts $doxyFile "GENERATE_PERLMOD       = NO"
+
+    # Keep doxygen comments within code blocks
+    puts $doxyFile "STRIP_CODE_COMMENTS    = NO"
+
+    # Define alias for inserting images to both HRML and PDF at once
+    puts $doxyFile "ALIASES += figure\{1\}=\"\\image html \\1 \\n \\image latex \\1\""
+    puts $doxyFile "ALIASES += figure\{2\}=\"\\image html \\1 \\2 \\n \\image latex \\1 \\2\""
+
+    set PARAM_INPUT "INPUT                  ="
+    set PARAM_IMAGEPATH "IMAGE_PATH             = $inputDir/resources/ "
+
+    foreach docFile $DocFilesList {
+        set NEW_IMG_PATH [file normalize [file dirname "$inputDir/$docFile"]]
+        if { [string compare $NEW_IMG_PATH $casroot] != 0 } {
+          if {[file isdirectory "$NEW_IMG_PATH/images"]} {
+            append PARAM_IMAGEPATH " $NEW_IMG_PATH/images"
+          }
+        }
+        append PARAM_INPUT " " $inputDir/$docFile
+    }
+    puts $doxyFile $PARAM_INPUT
+    puts $doxyFile $PARAM_IMAGEPATH
+
+    if { $generatorMode == "HTML_ONLY"} {
+        # Set a reference to a TAGFILE
+        if { $tagFileDir != "" } {
+            if {[file exists $tagFileDir/OCCT.tag] == 1} {
+                set tagPath [OverviewDoc_GetRelPath $tagFileDir $outDir/html]
+                puts $doxyFile "TAGFILES               = $tagFileDir/OCCT.tag=$tagPath/html"
+            }
+        }
+        # HTML Output
+        puts $doxyFile "GENERATE_LATEX         = NO"
+        puts $doxyFile "GENERATE_HTMLHELP      = NO"
+        puts $doxyFile "GENERATE_HTML          = YES"
+        puts $doxyFile "HTML_COLORSTYLE_HUE    = 220"
+        puts $doxyFile "HTML_COLORSTYLE_SAT    = 100"
+        puts $doxyFile "HTML_COLORSTYLE_GAMMA  = 80"
+        puts $doxyFile "HTML_TIMESTAMP         = YES"
+        puts $doxyFile "HTML_DYNAMIC_SECTIONS  = YES"
+        puts $doxyFile "HTML_INDEX_NUM_ENTRIES = 100"
+        puts $doxyFile "DISABLE_INDEX          = YES"
+        puts $doxyFile "GENERATE_TREEVIEW      = YES"
+        puts $doxyFile "ENUM_VALUES_PER_LINE   = 8"
+        puts $doxyFile "TREEVIEW_WIDTH         = 250"
+        puts $doxyFile "EXTERNAL_PAGES         = NO"
+        # HTML Search engine options
+        if { [string tolower $searchMode] == "none" } {
+          puts $doxyFile "SEARCHENGINE           = NO"
+          puts $doxyFile "SERVER_BASED_SEARCH    = NO"
+          puts $doxyFile "EXTERNAL_SEARCH        = NO"
+        } else {
+          puts $doxyFile "SEARCHENGINE           = YES"
+          if { [string tolower $searchMode] == "local" } {
+            puts $doxyFile "SERVER_BASED_SEARCH    = NO"
+            puts $doxyFile "EXTERNAL_SEARCH        = NO"
+          } elseif { [string tolower $searchMode] == "server" } {
+            puts $doxyFile "SERVER_BASED_SEARCH    = YES"
+            puts $doxyFile "EXTERNAL_SEARCH        = NO"
+          } elseif { [string tolower $searchMode] == "external" } {
+            puts $doxyFile "SERVER_BASED_SEARCH    = YES"
+            puts $doxyFile "EXTERNAL_SEARCH        = YES"
+          } else {
+            puts "ERROR: Wrong search engine type"
+            close $doxyFile 
+            return
+          }
+        }
+        puts $doxyFile "SEARCHDATA_FILE        = searchdata.xml"
+        puts $doxyFile "SKIP_FUNCTION_MACROS   = YES"
+        # Formula options
+        puts $doxyFile "FORMULA_FONTSIZE       = 12"
+        puts $doxyFile "FORMULA_TRANSPARENT    = YES"
+        puts $doxyFile "USE_MATHJAX            = YES"
+        puts $doxyFile "MATHJAX_FORMAT         = HTML-CSS"
+        puts $doxyFile "MATHJAX_RELPATH        = ${mathjaxLocation}"
+        
+    } elseif { $generatorMode == "CHM_ONLY"} {
+        puts $doxyFile "GENERATE_HTMLHELP      = YES"
+        puts $doxyFile "CHM_FILE               = ../../overview.chm"
+        puts $doxyFile "HHC_LOCATION           = \"$hhcPath\""
+        puts $doxyFile "DISABLE_INDEX          = YES"
+        # Formula options
+        puts $doxyFile "FORMULA_FONTSIZE       = 12"
+        puts $doxyFile "FORMULA_TRANSPARENT    = YES"
+        puts $doxyFile "USE_MATHJAX            = YES"
+        puts $doxyFile "MATHJAX_FORMAT         = HTML-CSS"
+        puts $doxyFile "MATHJAX_RELPATH        = ${mathjaxLocation}"
+
+    } elseif { $generatorMode == "PDF_ONLY"} {
+        puts $doxyFile "GENERATE_HTMLHELP      = NO"
+        puts $doxyFile "GENERATE_HTML          = NO"
+        puts $doxyFile "DISABLE_INDEX          = YES"
+        puts $doxyFile "GENERATE_TREEVIEW      = NO"
+        puts $doxyFile "PREDEFINED             = PDF_ONLY"
+        puts $doxyFile "GENERATE_LATEX         = YES"
+        puts $doxyFile "COMPACT_LATEX          = YES"
+        puts $doxyFile "PDF_HYPERLINKS         = YES"
+        puts $doxyFile "USE_PDFLATEX           = YES"
+        puts $doxyFile "LATEX_BATCHMODE        = YES"
+        puts $doxyFile "LATEX_OUTPUT           = latex"
+        puts $doxyFile "LATEX_CMD_NAME         = latex"
+        puts $doxyFile "MAKEINDEX_CMD_NAME     = makeindex"
+    }
+
+    close $doxyFile 
+}
+
+# Returns the relative path between two directories
+proc OverviewDoc_GetRelPath {targetFile currentpath} {
+  set cc [file split [file normalize $currentpath]]
+  set tt [file split [file normalize $targetFile]]
+  
+  if {![string equal [lindex $cc 0] [lindex $tt 0]]} {
+      # not on *n*x then
+      return -code error "$targetFile not on same volume as $currentpath"
+  }
+  while {[string equal [lindex $cc 0] [lindex $tt 0]] && [llength $cc] > 0} {
+      # discard matching components from the front
+      set cc [lreplace $cc 0 0]
+      set tt [lreplace $tt 0 0]
+  }
+  set prefix ""
+  if {[llength $cc] == 0} {
+      # just the file name, so targetFile is lower down (or in same place)
+      set prefix "."
+  }
+  # step up the tree
+  for {set i 0} {$i < [llength $cc]} {incr i} {
+      append prefix " .."
+  }
+  # stick it all together (the eval is to flatten the targetFile list)
+  return [eval file join $prefix $tt]
+}
+
+# Prints Help message
+proc OverviewDoc_PrintHelpMessage {} {
+    puts "\nUsage : occdoc \[-h\] \[-html\] \[-pdf\] \[-m=<list of files>\] \[-l=<document name>\] \[-v\] \[-s\]"
+    puts ""
+    puts " Options are : "
+    puts "    -html                  : To generate HTML files"
+    puts "                             (cannot be used with -pdf or -chm)"
+    puts "    -pdf                   : To generate PDF files"
+    puts "                             (cannot be used with -html or chm)"
+    puts "    -chm                   : To generate CHM files"
+    puts "                             (cannot be used with -html or pdf)"
+    puts "    -hhc                   : To define path to hhc - chm generator"
+    puts "                           : is used with just -chm option"
+    puts "    -m=<modules_list>      : Specifies list of documents to generate."
+    puts "                             If it is not specified, all files "
+    puts "                             mentioned in FILES.txt are processed."
+    puts "    -l=<document_name>     : Specifies the document caption "
+    puts "                             for a single document"
+    puts "    -h                     : Prints help message"
+    puts "    -v                     : Specifies the Verbose mode"
+    puts "                             (info on all script actions is shown)"
+    puts "    -s=<search_mode>       : Specifies the Search mode of HTML documents."
+    puts "                             Can be: none | local | server | external"
+    puts "                           : Can be used only with -html option"
+    puts "    -mathjax=<path>        : To use local or alternative copy of MathJax"
+}
+
+# Parses command line arguments
+proc OverviewDoc_ParseArguments {arguments} {
+    global args_names
+    global args_values
+    set args_names {}
+    array set args_values {}
+
+    foreach arg $arguments {
+        if {[regexp {^(-)[a-z]+$} $arg] == 1} {
+            set name [string range $arg 1 [string length $arg]-1]
+            lappend args_names $name
+            set args_values($name) "NULL"
+            continue
+        } elseif {[regexp {^(-)[a-z]+=.+$} $arg] == 1} {
+            set equal_symbol_position [string first "=" $arg]
+            set name [string range $arg 1 $equal_symbol_position-1]
+            lappend args_names $name
+            set value [string range $arg $equal_symbol_position+1 [string length $arguments]-1]
+            
+            # To parse a list of values for -m parameter
+            if { [string first "," $value] != -1 } {
+                set value [split $value ","];
+            }
+            set args_values($name) $value
+        } else {
+            puts "Error in argument $arg"
+            return 1
+        }
+    }
+    return 0
+}
+
+# Loads a list of docfiles from file FILES.txt
+proc OverviewDoc_LoadFilesList {} {
+
+    set INPUTDIR [file normalize [file dirname [info script]]]
+    
+    global available_docfiles
+    set available_docfiles {}
+
+    # Read data from file
+    if { [file exists "$INPUTDIR/FILES.txt"] == 1 } {
+        set FILE [open "$INPUTDIR/FILES.txt" r]
+        while {1} {
+            set line [string trim [gets $FILE]]
+
+            # trim possible comments starting with '#'
+            set line [regsub {\#.*} $line {}]
+
+            if {$line != ""} {
+              lappend available_docfiles $line
+            }
+
+            if {[eof $FILE]} {
+                close $FILE
+                break
+            }
+        }
+    } else {
+        return -1
+    }
+    return 0
+}
+
+# Writes new tex file for conversion from tex to pdf for a specific doc
+proc OverviewDoc_MakeRefmanTex {fileName latexDir docLabel verboseMode} {
+
+    if {$verboseMode == "YES"} {
+        puts "INFO: Making refman.tex file for $fileName"
+    }
+    set DOCNAME "$latexDir/refman.tex"
+    if {[file exists $DOCNAME] == 1} {
+        file delete -force $DOCNAME
+    }
+
+    set year [clock format [clock seconds] -format {%Y}]
+
+    set texfile [open $DOCNAME w]
+
+    puts $texfile "\\batchmode"
+    puts $texfile "\\nonstopmode"
+    puts $texfile "\\documentclass\[oneside\]{article}"
+    puts $texfile "\n% Packages required by doxygen"
+    puts $texfile "\\usepackage{calc}"
+    puts $texfile "\\usepackage{doxygen}"
+    puts $texfile "\\usepackage{graphicx}"
+    puts $texfile "\\usepackage\[utf8\]{inputenc}"
+    puts $texfile "\\usepackage{makeidx}"
+    puts $texfile "\\usepackage{multicol}"
+    puts $texfile "\\usepackage{multirow}"
+    puts $texfile "\\usepackage{textcomp}"
+    puts $texfile "\\usepackage{amsmath}"
+    puts $texfile "\\usepackage\[table\]{xcolor}"
+    puts $texfile "\\usepackage{indentfirst}"
+    puts $texfile ""
+    puts $texfile "% Font selection"
+    puts $texfile "\\usepackage\[T1\]{fontenc}"
+    puts $texfile "\\usepackage{mathptmx}"
+    puts $texfile "\\usepackage\[scaled=.90\]{helvet}"
+    puts $texfile "\\usepackage{courier}"
+    puts $texfile "\\usepackage{amssymb}"
+    puts $texfile "\\usepackage{sectsty}"
+    puts $texfile "\\renewcommand{\\familydefault}{\\sfdefault}"
+    puts $texfile "\\allsectionsfont{%"
+    puts $texfile "  \\fontseries{bc}\\selectfont%"
+    puts $texfile "  \\color{darkgray}%"
+    puts $texfile "}"
+    puts $texfile "\\renewcommand{\\DoxyLabelFont}{%"
+    puts $texfile "  \\fontseries{bc}\\selectfont%"
+    puts $texfile "  \\color{darkgray}%"
+    puts $texfile "}"
+    puts $texfile ""
+    puts $texfile "% Page & text layout"
+    puts $texfile "\\usepackage{geometry}"
+    puts $texfile "\\geometry{%"
+    puts $texfile "  a4paper,%"
+    puts $texfile "  top=2.5cm,%"
+    puts $texfile "  bottom=2.5cm,%"
+    puts $texfile "  left=2.5cm,%"
+    puts $texfile "  right=2.5cm%"
+    puts $texfile "}"
+    puts $texfile "\\tolerance=750"
+    puts $texfile "\\hfuzz=15pt"
+    puts $texfile "\\hbadness=750"
+    puts $texfile "\\setlength{\\emergencystretch}{15pt}"
+    puts $texfile "\\setlength{\\parindent}{0cm}";#0.75cm
+    puts $texfile "\\setlength{\\parskip}{0.2cm}"; #0.2
+    puts $texfile "\\makeatletter"
+    puts $texfile "\\renewcommand{\\paragraph}{%"
+    puts $texfile "  \@startsection{paragraph}{4}{0ex}{-1.0ex}{1.0ex}{%"
+    puts $texfile "\\normalfont\\normalsize\\bfseries\\SS@parafont%"
+    puts $texfile "  }%"
+    puts $texfile "}"
+    puts $texfile "\\renewcommand{\\subparagraph}{%"
+    puts $texfile "  \\@startsection{subparagraph}{5}{0ex}{-1.0ex}{1.0ex}{%"
+    puts $texfile "\\normalfont\\normalsize\\bfseries\\SS@subparafont%"
+    puts $texfile "  }%"
+    puts $texfile "}"
+    puts $texfile "\\makeatother"
+    puts $texfile ""
+    puts $texfile "% Headers & footers"
+    puts $texfile "\\usepackage{fancyhdr}"
+    puts $texfile "\\pagestyle{fancyplain}"
+    puts $texfile "\\fancyhead\[LE\]{\\fancyplain{}{\\bfseries\\thepage}}"
+    puts $texfile "\\fancyhead\[CE\]{\\fancyplain{}{}}"
+    puts $texfile "\\fancyhead\[RE\]{\\fancyplain{}{\\bfseries\\leftmark}}"
+    puts $texfile "\\fancyhead\[LO\]{\\fancyplain{}{\\bfseries\\rightmark}}"
+    puts $texfile "\\fancyhead\[CO\]{\\fancyplain{}{}}"
+    puts $texfile "\\fancyhead\[RO\]{\\fancyplain{}{\\bfseries\\thepage}}"
+    puts $texfile "\\fancyfoot\[LE\]{\\fancyplain{}{}}"
+    puts $texfile "\\fancyfoot\[CE\]{\\fancyplain{}{}}"
+    puts $texfile "\\fancyfoot\[RE\]{\\fancyplain{}{\\bfseries\\scriptsize Copyright (c) Open CASCADE $year}}"
+    puts $texfile "\\fancyfoot\[LO\]{\\fancyplain{}{\\bfseries\\scriptsize Copyright (c) Open CASCADE $year}}"
+    puts $texfile "\\fancyfoot\[CO\]{\\fancyplain{}{}}"
+    puts $texfile "\\fancyfoot\[RO\]{\\fancyplain{}{}}"
+    puts $texfile "\\renewcommand{\\footrulewidth}{0.4pt}"
+    puts $texfile "\\renewcommand{\\sectionmark}\[1\]{%"
+    puts $texfile "  \\markright{\\thesection\\ #1}%"
+    puts $texfile "}"
+    puts $texfile ""
+    puts $texfile "% Indices & bibliography"
+    puts $texfile "\\usepackage{natbib}"
+    puts $texfile "\\usepackage\[titles\]{tocloft}"
+    puts $texfile "\\renewcommand{\\cftsecleader}{\\cftdotfill{\\cftdotsep}}"
+    puts $texfile "\\setcounter{tocdepth}{3}"
+    puts $texfile "\\setcounter{secnumdepth}{5}"
+    puts $texfile "\\makeindex"
+    puts $texfile ""
+    puts $texfile "% Hyperlinks (required, but should be loaded last)"
+    puts $texfile "\\usepackage{ifpdf}"
+    puts $texfile "\\ifpdf"
+    puts $texfile "  \\usepackage\[pdftex,pagebackref=true\]{hyperref}"
+    puts $texfile "\\else"
+    puts $texfile "  \\usepackage\[ps2pdf,pagebackref=true\]{hyperref}"
+    puts $texfile "\\fi"
+    puts $texfile "\\hypersetup{%"
+    puts $texfile "  colorlinks=true,%"
+    puts $texfile "  linkcolor=black,%"
+    puts $texfile "  citecolor=black,%"
+    puts $texfile "  urlcolor=blue,%"
+    puts $texfile "  unicode%"
+    puts $texfile "}"
+    puts $texfile ""
+    puts $texfile "% Custom commands"
+    puts $texfile "\\newcommand{\\clearemptydoublepage}{%"
+    puts $texfile "  \\newpage{\\pagestyle{empty}\\cleardoublepage}%"
+    puts $texfile "}"
+    puts $texfile "\n"
+    puts $texfile "%===== C O N T E N T S =====\n"
+    puts $texfile "\\begin{document}"
+    puts $texfile ""
+    puts $texfile "% Titlepage & ToC"
+    puts $texfile "\\hypersetup{pageanchor=false}"
+    puts $texfile "\\pagenumbering{roman}"
+    puts $texfile "\\begin{titlepage}"
+    puts $texfile "\\vspace*{7cm}"
+    puts $texfile "\\begin{center}%"
+    puts $texfile "\\includegraphics\[width=0.75\\textwidth, height=0.2\\textheight\]{../../../dox/resources/occt_logo.png}\\\\"; #\\\\\\\\
+    puts $texfile "{\\Large Open C\\-A\\-S\\-C\\-A\\-D\\-E Technology \\\\\[1ex\]\\Large [OverviewDoc_DetectCasVersion $latexDir/../../../] }\\\\"
+    puts $texfile "\\vspace*{1cm}"
+    puts $texfile "{\\Large $docLabel}\\\\"
+    puts $texfile "\\vspace*{1cm}"
+#    puts $texfile "{\\large Generated by Doxygen 1.8.4}\\\\"
+    puts $texfile "\\vspace*{0.5cm}"
+    puts $texfile "{\\small \\today}\\"
+    puts $texfile "\\end{center}"
+    puts $texfile "\\end{titlepage}"
+    puts $texfile "\\clearpage"
+    puts $texfile "\\pagenumbering{roman}"
+    puts $texfile "\\tableofcontents"
+    puts $texfile "\\newpage"
+    puts $texfile "\\pagenumbering{arabic}"
+    puts $texfile "\\hypersetup{pageanchor=true}"
+    puts $texfile ""
+    puts $texfile "\\let\\stdsection\\section"
+    puts $texfile "  \\renewcommand\\section{\\pagebreak\\stdsection}"
+    puts $texfile "\\hypertarget{$fileName}{}"
+    puts $texfile "\\input{$fileName}"
+    puts $texfile ""
+    puts $texfile "% Index"
+    puts $texfile "\\newpage"
+    puts $texfile "\\phantomsection"
+    puts $texfile "\\addcontentsline{toc}{part}{Index}"
+    puts $texfile "\\printindex\n"
+    puts $texfile "\\end{document}"
+
+    close $texfile
+}
+
+# Postprocesses generated TeX files
+proc OverviewDoc_ProcessTex {{texFiles {}} {latexDir} verboseMode} {
+
+    foreach TEX $texFiles {
+        if {$verboseMode == "YES"} {
+            puts "INFO: Preprocessing file $TEX"
+        }
+
+         if {![file exists $TEX]} {
+          puts "file $TEX doesn't exist"
+          return
+        }
+
+        set IN_F  [open "$TEX" r]
+        set TMPFILENAME "$latexDir/temp.tex"
+
+        set OUT_F [open $TMPFILENAME w]
+        
+        while {1} {
+            set line [gets $IN_F]
+            if { [string first "\\includegraphics" $line] != -1 } {
+                # replace svg extension by pdf
+                set line [regsub {[.]svg} $line ".pdf"]
+                # Center images in TeX files
+                set line "\\begin{center}\n $line\n\\end{center}"
+            } elseif { [string first "\\subsection" $line] != -1 } {
+                # Replace \subsection with \section tag
+                regsub -all "\\\\subsection" $line "\\\\section" line
+            } elseif { [string first "\\subsubsection" $line] != -1 } {
+                # Replace \subsubsection with \subsection tag
+                regsub -all "\\\\subsubsection" $line "\\\\subsection" line
+            } elseif { [string first "\\paragraph" $line] != -1 } {
+                # Replace \paragraph with \subsubsection tag
+                regsub -all "\\\\paragraph" $line "\\\\subsubsection" line
+            }
+            puts $OUT_F $line
+            
+            if {[eof $IN_F]} {
+                close $IN_F
+                close $OUT_F
+                break
+            }
+        }
+        file delete -force $TEX
+        file rename $TMPFILENAME $TEX
+    }
+}
+
+# Convert SVG files to PDF format to allow including them to PDF
+# (requires InkScape to be in PATH)
+proc OverviewDoc_ProcessSvg {latexDir verboseMode} {
+
+    foreach file [glob -nocomplain $latexDir/*.svg] {
+        if {$verboseMode == "YES"} {
+            puts "INFO: Converting file $file"
+        }
+
+        set pdffile "[file rootname $file].pdf"
+        if { [catch {exec inkscape -z -D --file=$file --export-pdf=$pdffile} res] } {
+            puts "Error: $res"
+            puts "Conversion failed; check that Inkscape is in PATH!"
+            puts "SVG images will be lost in PDF documents"
+            return
+        }
+    }
+}
+
+# Main procedure for documents compilation
+proc OverviewDoc_Main { {docfiles {}} generatorMode docLabel verboseMode searchMode hhcPath mathjaxLocation} {
+
+    set INDIR      [file normalize [file dirname [info script]]]
+    set CASROOT    [file normalize [file dirname "$INDIR/../../"]]
+    set OUTDIR     $CASROOT/doc
+    set PDFDIR     $OUTDIR/overview/pdf
+    set HTMLDIR    $OUTDIR/overview/html
+    set LATEXDIR   $OUTDIR/overview/latex
+    set TAGFILEDIR $OUTDIR/refman
+    set DOXYFILE   $OUTDIR/OCCT.cfg
+
+    # Create or clean the output folders
+    if {[file exists $OUTDIR] == 0} {
+        file mkdir $OUTDIR
+    } 
+    if {[file exists $HTMLDIR] == 0} {
+        file mkdir $HTMLDIR
+    }
+    if {[file exists $PDFDIR] == 0} {
+        file mkdir $PDFDIR
+    }
+    
+    if {[file exists $LATEXDIR]} {
+      #file delete {*}[glob -nocomplain $LATEXDIR/*.*]
+      file delete -force $LATEXDIR
+    }
+    file mkdir $LATEXDIR
+    
+    # is MathJax HLink?
+    set mathjax_relative_location $mathjaxLocation
+    if { [file isdirectory "$mathjaxLocation"] == 1 } {
+      if { $generatorMode == "HTML_ONLY"} {
+        # related path
+        set mathjax_relative_location [relativePath $HTMLDIR $mathjaxLocation]
+      } elseif { $generatorMode == "CHM_ONLY"} {
+        # absolute path
+        set mathjax_relative_location [file normalize $mathjaxLocation]
+      }
+    }
+
+    # Run tools to compile documents
+    puts "[clock format [clock seconds] -format {%Y-%m-%d %H:%M}] Generating Doxyfile..."
+    
+    OverviewDoc_MakeDoxyfile $CASROOT "$OUTDIR/overview" $TAGFILEDIR $DOXYFILE $generatorMode $docfiles $verboseMode $searchMode $hhcPath $mathjax_relative_location
+
+    # Run doxygen tool
+    set starttimestamp [clock format [clock seconds] -format {%Y-%m-%d %H:%M}]
+    if { $generatorMode == "HTML_ONLY"} {
+      puts "$starttimestamp Generating HTML files..."
+    } elseif { $generatorMode == "CHM_ONLY" } {
+      puts "$starttimestamp Generating CHM file..."
+    }
+    set RESULT [catch {exec doxygen $DOXYFILE > $OUTDIR/doxygen_out.log} DOX_ERROR] 
+    if {$RESULT != 0} {
+        if {[llength [split $DOX_ERROR "\n"]] > 1} {
+            if {$verboseMode == "YES"} {
+                puts "Error running Doxygen; see log in\n$OUTDIR/doxygen_warnings_and_errors.log"
+            }
+            set DOX_ERROR_FILE [open "$OUTDIR/doxygen_warnings_and_errors.log" "w"]
+            puts $DOX_ERROR_FILE $DOX_ERROR
+            close $DOX_ERROR_FILE
+        } else {
+            puts $DOX_ERROR
+        }
+    }
+    # Close the Doxygen application
+    after 300
+
+    # Start PDF generation routine
+    if { $generatorMode == "PDF_ONLY" } {
+        puts "[clock format [clock seconds] -format {%Y-%m-%d %H:%M}] Generating PDF files..."
+
+        set OS $::tcl_platform(platform)
+        if { $OS == "unix" } {
+            set PREFIX ".sh"
+        } elseif { $OS == "windows" } {
+            set PREFIX ".bat"
+        }
+
+        # Prepare a list of TeX files, generated by Doxygen
+        cd $LATEXDIR
+        
+        set TEXFILES [glob $LATEXDIR -type f -directory $LATEXDIR -tails "*.tex" ]
+        set REFMAN_IDX [lsearch $TEXFILES "refman.tex"]
+        set TEXFILES [lreplace $TEXFILES $REFMAN_IDX $REFMAN_IDX]
+
+
+        set IDX [lsearch $TEXFILES "$LATEXDIR"]
+        while { $IDX != -1} {
+            set TEXFILES [lreplace $TEXFILES $IDX $IDX]
+            set IDX [lsearch $TEXFILES "$LATEXDIR"]
+        }
+
+        if {$verboseMode == "YES"} {
+            puts "Preprocessing generated TeX files..."
+        }
+        OverviewDoc_ProcessTex $TEXFILES $LATEXDIR $verboseMode
+        
+        if {$verboseMode == "YES"} {
+            puts "Converting SVG images to PNG format..."
+        }
+        OverviewDoc_ProcessSvg $LATEXDIR $verboseMode
+        
+        if {$verboseMode == "YES"} {
+            puts "Generating PDF files from TeX files..."
+        }
+        foreach TEX $TEXFILES {
+            # Rewrite existing REFMAN.tex file...
+            set TEX [string range $TEX 0 [ expr "[string length $TEX] - 5"]]
+            OverviewDoc_MakeRefmanTex $TEX $LATEXDIR $docLabel $verboseMode
+            
+            if {$verboseMode == "YES"} {
+                puts "INFO: Generating PDF file from $TEX"
+                # ...and use it to generate PDF from TeX...
+                puts "Executing $LATEXDIR/make$PREFIX..."
+            }
+            set RESULT [catch {eval exec [auto_execok $LATEXDIR/make$PREFIX] > "$OUTDIR/pdflatex_out.log"} LaTeX_ERROR]
+            if {$RESULT != 0} {
+                if {[llength [split $LaTeX_ERROR "\n"]] > 1} {
+                    if {$verboseMode == "YES"} {
+                        puts "Errors running Latex; see log in \n$OUTDIR/pdflatex_warnings_and_errors.log"
+                    }
+                    set LaTeX_ERROR_FILE [open "$OUTDIR/pdflatex_warnings_and_errors.log" "w"]
+                    puts $LaTeX_ERROR_FILE $LaTeX_ERROR
+                    close $LaTeX_ERROR_FILE
+                } else {
+                    puts $DOX_ERROR
+                }
+            }
+
+            # ...and place it to the specific folder
+            if { [file exists $PDFDIR/$TEX.pdf] == 1 } {
+                file delete -force $PDFDIR/$TEX.pdf
+            }
+            
+            if {![file exists "$LATEXDIR/refman.pdf"]} {
+              puts "Error: Latex failed to create $LATEXDIR/refman.pdf"
+              return
+            }
+            
+            file rename $LATEXDIR/refman.pdf "$PDFDIR/$TEX.pdf"
+        }
+    }
+
+    cd $INDIR
+    puts "[clock format [clock seconds] -format {%Y-%m-%d %H:%M}] Generation completed"
+    if { $generatorMode == "HTML_ONLY" } {
+        puts "View generated HTML documentation by opening:"
+        puts "$OUTDIR/overview/html/index.html"
+    }
+    if { $generatorMode == "PDF_ONLY" } {
+        puts "PDF files are generated in folder:"
+        puts "$OUTDIR/overview/pdf"
+    }
+}
+
+proc relativePath {thePathFrom thePathTo} {
+  if { [file isdirectory "$thePathFrom"] == 0 } {
+    return ""
+  }
+
+  set aPathFrom [file normalize "$thePathFrom"]
+  set aPathTo   [file normalize "$thePathTo"]
+
+  set aCutedPathFrom "${aPathFrom}/dummy"
+  set aRelatedDeepPath ""
+
+  while { "$aCutedPathFrom" != [file normalize "$aCutedPathFrom/.."] } {
+    set aCutedPathFrom [file normalize "$aCutedPathFrom/.."]
+    # does aPathTo contain aCutedPathFrom?
+    regsub -all $aCutedPathFrom $aPathTo "" aPathFromAfterCut
+    if { "$aPathFromAfterCut" != "$aPathTo" } { # if so
+      if { "$aCutedPathFrom" == "$aPathFrom" } { # just go higher, for example, ./somefolder/someotherfolder
+        set aPathTo ".${aPathTo}"
+      } elseif { "$aCutedPathFrom" == "$aPathTo" } { # remove the last "/"
+        set aRelatedDeepPath [string replace $aRelatedDeepPath end end ""]
+      }
+      regsub -all $aCutedPathFrom $aPathTo $aRelatedDeepPath aPathToAfterCut
+      regsub -all "//" $aPathToAfterCut "/" aPathToAfterCut
+      return $aPathToAfterCut
+    }
+    set aRelatedDeepPath "$aRelatedDeepPath../"
+
+  }
+
+  return $thePathTo
+}
+
+# A command for User Documentation compilation
+proc occdoc {args} {
+    # Programm options
+    set GEN_MODE    "HTML_ONLY"
+    
+    set DOCFILES  {}
+    set DOCLABEL    "Default OCCT Document"
+    set VERB_MODE   "NO"
+    set SEARCH_MODE "none"
+    set hhcPath ""
+
+    set mathjax_location "http://cdn.mathjax.org/mathjax/latest"
+    set mathjax_js_name "MathJax.js"
+
+    global available_docfiles
+    global tcl_platform
+    global args_names
+    global args_values
+    global env
+
+    # Load list of docfiles
+    if { [OverviewDoc_LoadFilesList] != 0 } {
+        puts "ERROR: File FILES.txt was not found"
+        return
+    }
+
+    # Parse CL arguments
+    if {[OverviewDoc_ParseArguments $args] == 1} {
+        return
+    }
+
+    foreach arg_n $args_names {
+    if {$arg_n == "h"} {
+      OverviewDoc_PrintHelpMessage
+      return
+    } elseif {$arg_n == "html"} {
+        set GEN_MODE "HTML_ONLY"
+    } elseif {$arg_n == "chm"} {
+        set GEN_MODE "CHM_ONLY"
+
+        if {"$tcl_platform(platform)" == "windows" && [lsearch $args_names hhc] == -1} {
+        if { [info exist env(ProgramFiles\(x86\))] } {
+          set hhcPath "$env(ProgramFiles\(x86\))\\HTML Help Workshop\\hhc.exe"
+          puts "Info: hhc found: $hhcPath"
+        } elseif { [info exist env(ProgramFiles)] } {
+            set hhcPath "$env(ProgramFiles)\\HTML Help Workshop\\hhc.exe"
+            puts "Info: hhc found: $hhcPath"
+        }
+        
+        if { ! [file exists $hhcPath] } {
+          puts "Error: HTML Help Compiler is not found in standard location [file dirname $hhcPath]; use option -hhc"
+          return
+        }
+      }
+
+    } elseif {$arg_n == "hhc"} {
+      global tcl_platform
+      if { $tcl_platform(platform) != "windows" } {
+        continue
+      }
+
+      if {$args_values(hhc) != "NULL"} {
+        set hhcPath $args_values(hhc)
+        if { [file isdirectory $hhcPath] } { 
+          set hhcPath [file join ${hhcPath} hhc.exe]
+        }
+        if { ! [file exists $hhcPath] } {
+          puts "Error: HTML Help Compiler is not found in $hhcPath"
+          return
+        }
+      } else {
+        puts "Error in argument hhc"
+        return
+      }
+
+    } elseif {$arg_n == "pdf"} {
+        set GEN_MODE "PDF_ONLY"
+    } elseif {$arg_n == "v"} {
+        set VERB_MODE "YES"
+    } elseif {$arg_n == "m"} {
+      if {$args_values(m) != "NULL"} {
+        set DOCFILES $args_values(m)
+      } else {
+        puts "Error in argument m"
+        return
+      }
+
+      # Check if all chosen docfiles are correct
+      foreach docfile $DOCFILES {
+        if { [lsearch $available_docfiles $docfile] == -1 } {
+          puts "File \"$docfile\" is not presented in the list of available docfiles"
+          puts "Please, specify the correct docfile name"
+          return
+        } else {
+          puts "File $docfile is presented in FILES.TXT"
+        }
+      }
+    } elseif {$arg_n == "l"} {
+      if { [llength $DOCFILES] <= 1 } {
+        if {$args_values(l) != "NULL"} {
+          set DOCLABEL $args_values(l)
+        } else {
+          puts "Error in argument l"
+          return
+        }
+      }
+    } elseif {$arg_n == "s"} {
+      if {$args_values(s) != "NULL"} {
+        set SEARCH_MODE $args_values(s)
+      } else {
+        puts "Error in argument s"
+        return
+      }
+    } elseif {$arg_n == "mathjax"} {
+      if {![info exists args_values(pdf)]} {
+        set possible_mathjax_loc $args_values(mathjax)
+        if {[file exist [file join $possible_mathjax_loc $mathjax_js_name]]} {
+          set mathjax_location $args_values(mathjax)
+          puts "$mathjax_location"
+        } else {
+          puts "Warning: $mathjax_js_name isn't found in $possible_mathjax_loc."
+          puts "         MathJax will be used from $mathjax_location"
+        }
+      } else {
+        puts "Info: MathJax is not used with pdf and will be ignored"
+      }
+    } else {
+      puts "\nWrong argument: $arg_n"
+      OverviewDoc_PrintHelpMessage
+      return
+    }
+  }
+
+  # Specify verbose mode
+  if { $GEN_MODE != "PDF_ONLY" && [llength $DOCFILES] > 1 } {
+    set DOCLABEL ""
+  }
+    
+  # If we don't specify list for docfiles with -m argument,
+  # we assume that we have to generate all docfiles
+  if { [llength $DOCFILES] == 0 } {
+    set DOCFILES $available_docfiles
+  }
+
+  # Start main activities
+  OverviewDoc_Main $DOCFILES $GEN_MODE $DOCLABEL $VERB_MODE $SEARCH_MODE $hhcPath $mathjax_location
+}

dox/overview/Overview.md

@@ -171,7 +171,7 @@ OCCT documentation is provided in several forms:
   Reference documentation is presented in **Modules --> Toolkits --> Packages --> Classes** 
   logic structure with cross-references to all OCCT classes and complete in-browser search by all classes.
 
-See @ref occt_dev_guides__documentation "OCCT Documentation Guide" for details on OCCT documentation system.
+See @ref dev_guides__documentation "OCCT Documentation Guide" for details on OCCT documentation system.
 
 **Generation of HTML documentation**
 
@@ -305,7 +305,7 @@ The following table lists graphic cards tested to work with OCCT.
 
 In most cases you need to rebuild OCCT on your platform (OS, compiler) before
 using it in your project, to ensure binary compatibility.
-See @ref occt_dev_guides__building for instructions on
+See @ref dev_guides__building for instructions on
 building OCCT from sources on supported platforms.
 
 @subsection OCCT_OVW_SECTION_4_1 Using Windows installer
@@ -456,10 +456,10 @@ Declaration of available plug-ins is done through special resource file(s).
 The pload command loads the plug-in in accordance with 
 the specified resource file and activates the commands implemented in the plug-in.
 
-The whole process of using the plug-in mechanism as well as the instructions for extending Test Harness is described in the @ref occt_user_guides__test_harness.
+The whole process of using the plug-in mechanism as well as the instructions for extending Test Harness is described in the @ref user_guides__test_harness.
 
 Draw Test Harness provides an environment for OCCT automated testing system. 
-Please, consult its @ref occt_dev_guides__tests "Automated Testing System" for details.
+Please, consult its @ref dev_guides__tests "Automated Testing System" for details.
 
 Remarks:
 
@@ -507,20 +507,17 @@ Type pload ALL
 
 1. Type *cd ../..* to return to the root directory
 2. Type *cd samples/tcl* to reach the *DrawResources* directory
-3. Type *source \<demo_file\>* to run the demonstration file provided with Open CASCADE. The following demonstration files are available:
-  * DataExchangeDemo.tcl: demonstrates sample sequence of operations with writing and reading IGES file
-  * ModelingDemo.tcl: demonstrates creation of simple shape and displaying it in HLR mode
-  * VisualizationDemo.tcl: demonstrates use of 3d viewer
-  * challenge.tcl: creates solid shape looking like abbreviation "CAD"
-  * bottle.tcl: creates bottle as in OCCT Tutorial
-  * drill.tcl: creates twist drill bit shape
-  * mill.tcl: creates milling cutter shape
-  * raytrace.tcl: demonstrates use of ray tracing display in 3d viewer
+3. Type *source <demo_file>* to run the demonstration file provided with Open CASCADE. The following demonstration files are available:
+  * bottle.tcl
+  * challenge.tcl  
+  * DataExchangeDemo.tcl
+  * ModelingDemo.tcl
+  * VisualizationDemo.tcl
 
 **Getting Help**
 
 1. Type *help* to see all available commands
-2. Type *help \<command_name\>* to find out the arguments for a given command
+2. Type *help <command_name>* to find out the arguments for a given command
 
 @subsection OCCT_OVW_SECTION_7_3 Programming Samples
 
@@ -577,7 +574,7 @@ From the viewpoint of programming, Open CASCADE Technology is designed
 to enhance user's C++ tools with high performance modeling classes, methods and functions. 
 The combination of these resources allows creating substantial applications.
 
-**See also:** @ref occt__tutorial "OCCT Tutorial" 
+**See also:** @ref tutorial "OCCT Tutorial" 
 
  Voxel
 ------

dox/overview/overview.md

@@ -1,616 +0,0 @@
-Overview {#mainpage}
-========
-
-@tableofcontents
-
-@section OCCT_OVW_SECTION_1 Welcome
-
-Welcome to Open CASCADE Technology (OCCT), a software development platform 
-providing services for 3D surface and solid modeling, CAD data exchange, and 
-visualization. Most of OCCT functionality is available in the form of C++ 
-libraries. OCCT can be best applied in development of software dealing with 3D 
-modeling (CAD), manufacturing / measuring (CAM) or numerical simulation (CAE).
-
-@htmlonly<center>@endhtmlonly 
-http://www.opencascade.org
-@image html /resources/occt_logo.png
-@image latex /resources/occt_logo.png
-@htmlonly</center>@endhtmlonly
-
-@section OCCT_OVW_SECTION_2 Copyrights
-
-Open CASCADE Technology and all materials, including this documentation, is 
-Copyright (c) 1999-2013 by OPEN CASCADE S.A.S. All rights reserved.
-
-@htmlonly<center>@endhtmlonly
-http://www.opencascade.com
-@image html /resources/occ_logo.png
-@image latex /resources/occ_logo.png
-@htmlonly</center>@endhtmlonly
-
- License
---------
-
-Open CASCADE Technology is free software; you can redistribute it and / or 
-modify it under the terms of the 
-@ref license_lgpl_21 "GNU Lesser General Public License (LGPL) version 2.1", 
-with additional @ref occt_lgpl_exception "exception".
-
-Alternatively, Open CASCADE Technology may be used under the terms of Open 
-CASCADE commercial license or contractual agreement.
-
-Note that Open CASCADE Technology is provided on an "AS IS" basis, WITHOUT 
-WARRANTY OF ANY KIND. The entire risk related to any use of the OCCT code and 
-materials is on you. See the @ref occt_public_license "license" text for formal 
-disclaimer.
-
- Trademark information
-----------------------
-
-You are hereby informed that all software is a property of its respective authors and is protected by 
-international and domestic laws on intellectual property and trademarks. 
-Should you need further information, please directly contact the authors.
-
-**CAS.CADE** and **Open CASCADE** are registered trademarks of 
-OPEN CASCADE S.A.S.
-
-**Linux** is a registered trademark of Linus Torvalds.
-
-**Windows** is a registered trademark of Microsoft Corporation in the United States and other countries.
-
-**Mac** and the Mac logo, **OpenCL** and the OpenCL logo, are trademarks of 
-Apple Inc., registered in the U.S. and other countries.
-
- Acknowledgements
-------------------
-
-The following parties are acknowledged for producing tools which are used within 
-Open CASCADE Technology libraries or for release preparation.
-
-You are hereby informed that all rights to the software listed below belong to its respective 
-authors and such software may not be freely available and/or be free of charge for any kind 
-of use or purpose. We strongly recommend that you carefully read the license of these products 
-and, in case you need any further information, directly contact their authors.
-
-**Qt** is a cross-platform application framework that is widely used for developing application software 
-with graphical user interface (GUI). Qt is free and open source software distributed under 
-the terms of the GNU Lesser General Public License. In OCCT Qt is used for programming samples. 
-If you need further information on Qt, please, refer to Qt Homepage (http://qt.digia.com).
-
-**Tcl** is a high-level programming language. Tk is a graphical user interface (GUI) toolkit, 
-with buttons, menus, listboxes, scrollbars, and so on. Taken together Tcl and Tk provide a solution 
-to develop cross-platform graphical user interfaces with a native look and feel. Tcl/Tk is under copyright by 
-Scriptics Corp., Sun Microsystems, and other companies. However, Tcl/Tk is an open source, and 
-the copyright allows you to use, modify, and redistribute Tcl/Tk for any purpose, without an 
-explicit license agreement and without paying any license fees or royalties. 
-To use Tcl/Tk, please refer to the Licensing Terms (http://www.tcl.tk/software/tcltk/license.html).
-
-**Robert Boehne** has developed **GNU Autoconf**, **Automake** and **Libtool** scripts and makefiles 
-for the Open CASCADE project http://sourceforge.net/projects/autoopencas/, 
-which became an initial groundwork for the build scripts based on respective GNU tools 
-(autoconf, automake and libtool) in Open CASCADE Technology version 4.0. 
-These scripts are now maintained by the OPEN CASCADE company.
-
-**GL2PS** is developed by Christophe Geuzaine and others. It is optionally used by OCCT to
-export content of OpenGL scene to vector graphics formats (PS, PDF, EMF, SVG). 
-The library is licensed under GL2PS LICENSE http://www.geuz.org/gl2ps/COPYING.GL2PS Version 2, November 2003.
-
-**FreeType 2** is developed by Antoine Leca, David Turner, Werner Lemberg and others. 
-It is a software font engine that is designed to be small, efficient, highly customizable and 
-portable while capable of producing high-quality output (glyph images). This product 
-can be used in graphic libraries, display servers, font conversion tools, 
-text image generation tools, and many other products.
-
-FreeType 2 is released under two open-source licenses: BSD-like FreeType License and the GPL.
-
-**Intel(R) Threading Building Blocks (TBB)** offers a rich and complete approach to expressing parallelism in a C++ program. 
-It is a library that helps you to take advantage of multi-core processor performance without having to be a threading expert. 
-Threading Building Blocks is not just a threads-replacement library. It represents a higher-level, task-based parallelism that 
-abstracts platform details and threading mechanisms for scalability and performance. 
-TBB is available under GPLv2 license with the runtime exception.
-
-Open CASCADE Technology WOK module on Windows also makes use of LGPL-licensed C routines **regexp** 
-and **getopt**, taken from GNU C library.
-
-**OpenGL** is an industry standard API for 3D graphics used by OCCT for 
-implementation of 3D viewer. OpenGL specification is developed by the
-Khronos group, http://www.khronos.org/opengl/. OCCT code includes header 
-file *glext.h* obtained from Khronos web site.
-
-**OpenCL** (Open Computing Language) is open, royalty-free standard for 
-cross-platform, parallel programming of modern processors, optionally used by 
-OCCT for ray tracing. OpenCL specification is developed by the
-Khronos group, http://www.khronos.org/opencl/. The implementations of OpenCL 
-are available from Apple, AMD, NVIDIA, Intel, and other vendors. 
-**OpenCL Installable Client Driver (ICD) Loader** is a library provided by
-Khronos group which allows dispatching OpenCL calls to underlying 
-implementation.
-
-**Doxygen** developed by Dimitri van Heesch is open source documentation system for 
-C++, C, Java, Objective-C, Python, IDL, PHP and C#. This product is used in Open CASCADE Technology 
-for automatic creation of Technical Documentation from C++ header files. 
-If you need further information on Doxygen, please refer to http://www.stack.nl/~dimitri/doxygen/index.html.
-
-**Graphviz** is open source graph visualization software developed by John Ellson, Emden Gansner, Yifan Hu and Arif Bilgin. 
-Graph visualization is representiation of structured information as diagrams of abstract graphs and networks. 
-This product is used together with Doxygen in Open CASCADE Technology for automatic creation of Technical Documentation 
-(generation of dependency graphs). Current versions of Graphviz are licensed on an open source 
-basis under The Eclipse Public License (EPL) (http://www.graphviz.org/License.php).
-
-**Inno Setup** is a free script-driven installation system created in CodeGear Delphi by Jordan Russell. 
-In OCCT Inno Setup is used to create Installation Wizard on Windows. 
-It is licensed under Inno Setup License (http://www.jrsoftware.org/files/is/license.txt).
-
-**FreeImage** is an Open Source library supporting popular graphics image formats, such as PNG, BMP, JPEG, TIFF, 
-and others used by multimedia applications. This library is developed by Hervé Drolon and Floris van den Berg. 
-FreeImage is easy to use, fast, multithreading safe, compatible with all 32-bit or 64-bit versions of Windows, 
-and cross-platform (works both with Linux and Mac OS X). FreeImage is optionally used by OCCT to work
-with images, on conditions of the FreeImage Public License (FIPL) (http://freeimage.sourceforge.net/freeimage-license.txt).
-
-**MikTEX** is up-to-date implementation of TeX/LaTeX and related programs for Windows. It is used 
-for generation of User and Developer Guides in PDF format. See http://miktex.org for information
-on this tool.
-
-Adobe Systems, Inc. provides **Adobe Reader**, which can be used to view files in Portable Document Format (PDF). 
-
-@section OCCT_OVW_SECTION_3 Documentation
-
-OCCT documentation is provided in several forms:
-
-- This overview provides general description of OCCT structure, functionality, modules, and features. 
-  It is available in HTML format (generated by Doxygen) and includes User and Developer Guides.
-  The sources of this documentation are contained in **dox** subdirectory of OCCT sources 
-  (plain text format is used, with mixed MarkDown / Doxygen syntax mark-up).
-
-- User and Developer Guides describing in details OCCT modules and development tools are also available in 
-  Adobe Portable Document Format (PDF). To read this format, you need Adobe Acrobat Reader, 
-  which is a freeware and can be downloaded from the Adobe site. 
-
-- Full reference documentation covering all OCCT classes generated automatically by Doxygen 
-  software is provided in HTML format, in a separate package. 
-  Reference documentation is presented in **Modules --> Toolkits --> Packages --> Classes** 
-  logic structure with cross-references to all OCCT classes and complete in-browser search by all classes.
-
-See @ref occt_dev_guides__documentation "OCCT Documentation Guide" for details on OCCT documentation system.
-
-**Generation of HTML documentation**
-
-To generate HTML documentation from sources contained in *dox* subdirectory, 
-you need to have Tcl and Doxygen 1.8.4 (or above) installed on your system.
-
-In Tcl prompt, cd to OCCT root folder and run 
-
-    tclsh> source dox/start.tcl
-
-On Windows you can also run batch script **gendoc.bat**.
-
-
-**Generation of reference documentation**
-
-Reference documentation can be generated with help of WOK tool that 
-is available for download from www.opencascade.org and dev.opencascade.org sites.
-
-Prerequisites:
-
-  * Doxygen version 1.8.4 or higher
-  * Graphviz version 2.28.0 or higher
-
-Run WOK (cd \<WOK_INSTALL_DIR\>/site folder):
-
-* Using WOK TCL shell:
-      > wok_tclsh.sh
-
-* Using Emacs editor:
-      > wok_emacs.sh
-
-In the WOK prompt, step into your workbench:
-
-      > wokcd <your workbench>
-
-In your workbench, use **wgendoc** command with –h argument to get information about arguments of **wgendoc** command:
-
-      > wgendoc -h
-
-then run **wgendoc** command with required arguments, for instance:
-
-      > wgendoc -output=d:/occt/doc {-m=Draw Visualization}
-
-@section OCCT_OVW_SECTION_5 Requirements
-
-Open CASCADE Technology is designed to be highly portable and is known to 
-work on wide range of platforms (UNIX, Linux, Windows, Mac OS X). 
-Current version is officially certified on Windows (IA-32 and x86-64), 
-Linux (x86-64) and MAC OS X (x86-64) platforms. 
-
-The tables below describe the recommended hardware and software configurations
-for which OCCT is certified to work.
-
-@subsection OCCT_OVW_SECTION_5_1 Linux
-
-| Operating System  | Mandriva 2010, CentOS 5.5, CentOS 6.3, Fedora 17, Fedora 18, Ubuntu-1304, Debian 6.0\*  |
-| ----- | ----- |
-| Minimum memory    | 512 MB, 1 GB recommended |
-| Free disk space (complete installation) | 600 MB approx. |
-| Video card   | See \ref overview_req_graphics |
-| Graphic library | OpenGL 1.1+ (OpenGL 2.1+ is recommended)|
-| C++      | GNU gcc 4.0.  - 4.7.3. |
-| TCL (for testing tools)    | Tcltk 8.5 or 8.6 http://www.tcl.tk/software/tcltk/8.6.html |
-| Qt (for demonstration tools) | Qt 4.6.2 http://qt.nokia.com/downloads |
-| Freetype (for text rendering) | freetype-2.4.11 http://sourceforge.net/projects/freetype/files/ |
-| FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.15.4 http://sourceforge.net/projects/freeimage/files |
-| gl2ps (optional, for export contents of OCCT viewer to vector graphic files) | gl2ps-1.3.8  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 3.x or 4.x http://www.threadingbuildingblocks.org/ |
-| OpenCL (optional, for ray tracing visualization) | OpenCL SDK (usually one provided by vendor of your graphic card) or OpenCL ICD Loader by Khronos group, http://www.khronos.org/registry/cl |
-
-* Debian 60 64 bit is a platform used for regular testing of contributions 
-
-@subsection OCCT_OVW_SECTION_5_2 Windows
-
-| Operating System | Windows 8 / 7 SP1 / Vista SP2 / XP SP3 |
-| ----- | ----- |
-| Minimum memory    | 512 MB, 1 GB recommended |
-| Free disk space (complete installation) | 600 MB approx. |
-| Video card   | See \ref overview_req_graphics |
-| Graphic library | OpenGL 1.1+ (OpenGL 2.1+ is recommended)|
-| C++ | Microsoft Visual Studio: 2005 SP1, 2008 SP1\*, 2010 SP1, 2012 Update 3, 2013 <br>Intel C++ Composer XE 2013 SP1 |
-| TCL (for testing tools) | ActiveTcl 8.5 or 8.6 http://www.activestate.com/activetcl/downloads |
-| Qt (for demonstration tools) | Qt 4.6.2 http://qt.nokia.com/downloads |
-| Freetype (OCCT Text rendering) | freetype-2.4.11 http://sourceforge.net/projects/freetype/files/ |
-| FreeImage (Support of common graphic formats) | FreeImage 3.15.4 http://sourceforge.net/projects/freeimage/files |
-| gl2ps (Export contents of OCCT viewer to vector graphic file) | gl2ps-1.3.8  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 3.x or 4.x http://www.threadingbuildingblocks.org/ |
-| OpenCL (optional, for ray tracing visualization) | OpenCL SDK (usually one provided by vendor of your graphic card) or OpenCL ICD Loader by Khronos group, http://www.khronos.org/registry/cl |
-
-* VC++ 9 32-bit is used for certification of contributions and for building 
-  binary package of official release of OCCT on Windows.
-
-@subsection OCCT_OVW_SECTION_5_3 MAC OS X
-
-| Operating System | Mac OS X 10.9 Mavericks / 10.8 Mountain Lion / 10.7 Lion / 10.6.8 Snow Leopard |
-| ----- | ----- |
-| Minimum memory    | 512 MB, 1 GB recommended |
-| Free disk space (complete installation) | 600 MB approx. |
-| Video card | See \ref overview_req_graphics |
-| Graphic library | OpenGL 1.1+ (OpenGL 2.1+ is recommended)|
-| C++      | XCode 3.2 or newer (4.x is recommended) |
-| Qt (for demonstration tools) | Qt 4.6.2 http://qt.nokia.com/downloads |
-| Freetype (OCCT Text rendering) | freetype-2.4.11 http://sourceforge.net/projects/freetype/files/ |
-| FreeImage (Support of common graphic formats) | FreeImage 3.15.4 http://sourceforge.net/projects/freeimage/files |
-| gl2ps (Export contents of OCCT viewer to vector graphic file) | gl2ps-1.3.8  http://geuz.org/gl2ps/ |
-| Intel TBB (optional, for multithreaded algorithms) | TBB 3.x or 4.x http://www.threadingbuildingblocks.org/ |
-| OpenCL (optional, for ray tracing visualization) | Native OpenCL 1.2.8 | 
-
-@subsection overview_req_graphics Graphic cards
-
-For 3d viewer, graphic card or software implementation supporting OpenGL 1.1 
-or above is required. OpenGL 2.1+ is highly recommended.
-For ray tracing, hardware implementation of OpenCL 1.1+ is required.
-
-The following table lists graphic cards tested to work with OCCT.
-
-| Graphic card | Driver/GL/GLSL/CL version | OS | OpenGL (fixed pipeline) | OpenGL (shaders) | OpenCL (ray tracing) |
-| ---- | ---- | ---- | :----: | :----: | :----: |
-| NVIDIA GeForce GT 610, 630M, 640 | Driver 311.44, GL 4.3.0, GLSL 4.30 | Windows 7 64 bit | OK | OK | OK |
-| Intel(R) HD Graphics 3000 | GL 3.1.0, GLSL 1.40 | Windows 7 64 bit | OK | OK | none |
-| RadeOn 9600 | GL 2.1.8454, GLSL 1.20 | | OK | bad | none |
-| AMD/ATI RadeOn HD 7870 | Driver 6.14.10.12002, GL 4.2.12002, GLSL 4.20 | Windows 7 64-bit | OK | OK | OK |
-| Mesa 7.8.2 Windows GDI Driver\* | GL 2.1, GLSL version 1.20 | Mac OS X 10.6 / OS X 10.9 | OK | artifacts | none |
-| NVIDIA GeForce 320 |  | Mac OS X 10.6 / OS X 10.9 | OK | OK | OK on OSX 10.6, bad on OSX 10.9 |
-| NVIDIA GeForce 6600 GT | GL 2.1.2, GLSL 1.20 | Windows XP 32-bit | OK | OK | none |
-| Apple software OpenGL | | Mac OS X 10.6 / OS X 10.9 | OK | OK | OK |
-
-* Mesa implementation of OpenGL is used for certification testing of OCCT
-
-@section OCCT_OVW_SECTION_4 Installation
-
-In most cases you need to rebuild OCCT on your platform (OS, compiler) before
-using it in your project, to ensure binary compatibility.
-See @ref occt_dev_guides__building for instructions on
-building OCCT from sources on supported platforms.
-
-@subsection OCCT_OVW_SECTION_4_1 Using Windows installer
-
-On Windows Open CASCADE Technology can be installed with binaries precompiled by 
-Visual C++ 2008 with installation procedure.
-
-**Recommendation:**
-
-If you have a previous version of OCCT installed on your station, 
-and you do not plan to use it along with the new version, you might want to uninstall 
-the previous version (using Control Panel, Add/Remove Programs) before 
-the installation of this new version, to avoid possible problems 
-(conflict of system variables, paths, etc).
-
-**Attention:** For full installation OCCT requires approximately 650 Mb of disk space, 
-but during the installation process you will need 1,2 Gb of free disk space.
-
-OCCT installation with reference documentation requires 1,4 Gb on disk.
-
-  * Download the OCCT installer from OPEN CASCADE web site using the link. you have been provided
-  * Launch the installer and follow the instructions.
-
-The includes and binaries of third-party libraries necessary for building and launching 
-OCCT are included into binary distribution (built with Visual C++ 2008). 
-When the installation is complete, you will find the directories for 3rd party products 
-(some might be absent in case of custom installation) and the main **OCCT** directory:
-
-@image html /overview/images/overview_3rdparty.png 
-@image latex /overview/images/overview_3rdparty.png 
-
-The contents of the OCCT-6.7.0 directory (called further "OCCT root", or $CASROOT) are as follows: 
-
-@image html /overview/images/overview_installation.png "The directory tree"
-@image latex /overview/images/overview_installation.png "The directory tree"
-
-  * **adm**   This folder contains administration files, which allow rebuilding OCCT;
-  * **adm/cmake**  This folder contains files of CMake building procedure;
-  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++  2005, 2008 and 2010, which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
-  * **data**  This folder contains CAD files in different formats, which can be used to test the OCCT functionality;
-  * **doc**  This folder contains OCCT documentation in HTML and PDF format;
-  * **dox**  This folder contains sources of OCCT documentation in plain text (MarkDown) format;
-  * **drv**  This folder contains source files generated by WOK (private header files and instantiations of generic classes);
-  * **inc**  This folder contains all OCCT header files;
-  * **samples**  This folder contains sample applications.
-  * **src**  This folder contains OCCT source files. They are organized in folders, one per development unit;
-  * **tests**  This folder contains scripts for OCCT testing.
-  * **win32/vc9**  This folder contains executable and library files built in optimize mode for Windows platform by Visual C++  2008;
-
-@section OCCT_OVW_SECTION_4_2 Environment Variables
-
-To run any Open CASCADE Technology application you need to set the environment variables.
-
-### On Windows
-
-You can define the environment variables with env.bat script located in the 
-$CASROOT folder. This script accepts two arguments to be used: 
-the version of Visual Studio (vc8 - vc12) and the architecture (win32 or win64).
-
-The additional environment settings necessary for compiling OCCT libraries and samples 
-by Microsoft Visual Studio can be set using script custom.bat located in the same folder. 
-You might need to edit this script to correct the paths to third-party libraries 
-if they are installed on your system in a non-default location.
-
-Script msvc.bat can be used with the same arguments for immediate launch of Visual Studio for (re)compiling OCCT.
-
-### On Unix
-
-
-  If OCCT was built by Code::Blocks, you can define the environment variables with env_cbp.sh or custom_cbp.sh script.
-
-  If OCCT was built by Automake, you can define the environment variables with env_amk.sh or custom_amk.sh script.
-
-The scripts are located in the OCCT root folder.
-
- 
-### Description of system variables:
-
-
-  * **CASROOT** is used to define the root directory of Open CASCADE Technology;
-  * **PATH** is required to define the path to OCCT binaries and 3rdparty folder;
-  * **LD_LIBRARY_PATH** is required to define the path to OCCT libraries (on UNIX platforms only);
-  * **MMGT_OPT** (optional) if set to 1, the memory manager performs optimizations as described below; if set to 2, 
-    Intel (R) TBB optimized memory manager is used; if 0 (default), every memory block is allocated 
-    in C memory heap directly (via malloc() and free() functions). 
-    In the latter case, all other options except MMGT_CLEAR  and MMGT_REENTRANT are ignored;
-  * **MMGT_CLEAR** (optional) if set to 1 (default), every allocated memory block is cleared by zeros; 
-    if set to 0, memory block is returned as it is;
-  * **MMGT_CELLSIZE** (optional) defines the maximal size of blocks allocated in large pools of memory. Default is 200;
-  * **MMGT_NBPAGES** (optional) defines the size of memory chunks allocated for small blocks in pages 
-    (operating-system dependent). Default is 10000;
-  * **MMGT_THRESHOLD** (optional) defines the maximal size of blocks that are recycled internally 
-    instead of being returned to the heap. Default is 40000;
-  * **MMGT_MMAP** (optional) when set to 1 (default), large memory blocks are allocated using 
-    memory mapping functions of the operating system; if set to 0, 
-    they will be allocated in the C heap by malloc();
-  * **CSF_LANGUAGE** is required to define the default language of messages;
-  * **CSF_DEBUG** (optional, Windows only): if defined then a diagnostic message is displayed in case of an exception;
-  * **CSF_DEBUG_BOP** (optional): if defined then it should specify directory where diagnostic data on problems occured in Boolean operations will be saved;
-  * **CSF_MDTVTexturesDirectory** defines the directory for available textures when using texture mapping;
-  * **CSF_ShadersDirectory** defines the directory for GLSL programs (required for advanced rendering techniques and custom shaders);
-  * **CSF_UnitsDefinition** and **CSF_UnitsLexicon** should define paths to resource files Lexi_Expr.dat and Units.dat, respectively, required for support of measurement units;
-  * **CSF_SHMessage** is required in order to define the path to the messages file for *ShapeHealing*;
-  * **CSF_XSMessage** is required in order to define the path to the messages file for **STEP** and **IGES** translators;
-  * **CSF_StandardDefaults** and **CSF_PluginDefaults** are required in order to maintain CASCADE Persistence mechanism to make possible any open/save operations with OCAF documents;
-  * **CSF_StandardLiteDefaults** is required in order to maintain *OCCT Persistence mechanism* to make possible any open/save operations with Lite OCAF documents;
-  * **CSF_XCAFDefaults**  any open/save operations for **XDE** documents;
-  * **CSF_IGESDefaults** and **CSF_STEPDefaults** are required for **IGES** and **STEP** translators correspondingly in order to define the path to the resource files;
-  * **CSF_XmlOcafResource** is required in order to set the path to **XSD** resources, which defines XML grammar.
-  * **CSF_MIGRATION_TYPES** is required in order to read documents that contain old data types, such as *TDataStd_Shape*;
-  * **TCLLIBPATH**, **TCL_LIBRARY**, **TK_LIBRARY** and **TIX_LIBRARY** are required to allow work with **DRAW** and **WOK**.
-
-@section OCCT_OVW_SECTION_7 Getting Started
-
-@subsection OCCT_OVW_SECTION_7_1 Draw Test Harness
-
-Draw is a command interpreter based on TCL and a graphical system used for testing and demonstrating OCCT modeling libraries.
-
-Draw can be used interactively to create, display and modify objects such as curves, surfaces and topological shapes.
-
-@image html /overview/images/overview_draw.png
-@image latex /overview/images/overview_draw.png
-
-Scripts can be written to customize Draw and perform tests. 
-New types of objects and new commands can be added using C++ programming language.
-
-Draw contains:
-
-  * A command interpreter based on TCL command language.
-  * A 2D an 3D graphic viewer with support of operations such as zoom, pan, rotation and full-screen views.
-  * An optional set of geometric commands to create and modify curves and surfaces and to use OCCT geometry algorithms.
-  * A set of topological commands to create and modify BRep shapes and to use OCCT topology algorithms.
-  * A set of graphic commands for view and display operations including Mesh Visualization Service.
-  * A set of Application framework commands for handling of files and attributes.
-  * A set of Data Exchange commands for translation of files from various formats (IGES,STEP) into OCCT shapes.
-  * A set of Shape Healing commands: check of overlapping edges, approximation of a shape to BSpline, etc.  
-
-You can add new custom test harness commands to Draw in order to test 
-or demonstrate a new functionality, which you are developing.
-
-Currently DRAW Test Harness is a single executable called DRAWEXE.
-
-Commands grouped in toolkits can be loaded at run-time thereby implementing dynamically loaded plug-ins. 
-Thus you can work only with the commands that suit your needs adding 
-the commands dynamically without leaving the Test Harness session.
-
-Declaration of available plug-ins is done through special resource file(s). 
-The pload command loads the plug-in in accordance with 
-the specified resource file and activates the commands implemented in the plug-in.
-
-The whole process of using the plug-in mechanism as well as the instructions for extending Test Harness is described in the @ref occt_user_guides__test_harness.
-
-Draw Test Harness provides an environment for OCCT automated testing system. 
-Please, consult its @ref occt_dev_guides__tests "Automated Testing System" for details.
-
-Remarks:
-
-* The DRAWEXE executable is delivered with the installation procedure on Windows platform only.
-* To start it, launch DRAWEXE executable from Open CASCADE Technology/Draw Test Harness item of the Start\\Programs menu.
-
-@subsection OCCT_OVW_SECTION_7_2 Experimenting with Draw Test Harness
-
- Running Draw
-------------
-
-**On Linux:**
-
-1. If OCCT was built by Code::Blocks  use <i>$CASROOT/draw_cbp.sh</i> file to launch *DRAWEXE* executable;
-2. If OCCT was built by Automake    use <i>$CASROOT/draw_amk.sh</i> file to launch *DRAWEXE* executable;
-
-Draw[1]> prompt appears in the command window
-
-Type *pload ALL*
-
-**On Windows:**
-
-Launch Draw executable from Open CASCADE Technology\\Test Harness\\Draw Test Harness 
-item of the Start\\Programs menu or Use <i>$CASROOT\\draw.bat</i> file to launch *DRAWEXE* executable.
-
-Draw[1]> prompt appears in the command window
-
-Type pload ALL
-
-**Creating your first geometric objects**
-
-1. In the command window, type *axo* to create an axonometric view
-2. Type *box b -10 -10 -10 20 20 20* to create a cube *b* of size 20, parallel to the X Y Z axis and centered on the origin. The cube will be displayed in the axonometric view in wireframe mode.
-3. Type *fit* to fill the viewer with the cube
-4. Type *pcylinder c 2 30* to create a cylinder *c* of radius 2 and height 30. The cylinder will be displayed in addition to the cube
-
-**Manipulating the view**
-
-1. Type *clear* to erase the view
-2. Type *donly c* to display the cylinder only
-3. Type *donly b* to display the cube only
-4. Type *hlr hlr b* to display the cube in the hidden line removal mode
-
-**Running demonstration files**
-
-1. Type *cd ../..* to return to the root directory
-2. Type *cd samples/tcl* to reach the *DrawResources* directory
-3. Type *source \<demo_file\>* to run the demonstration file provided with Open CASCADE. The following demonstration files are available:
-  * DataExchangeDemo.tcl: demonstrates sample sequence of operations with writing and reading IGES file
-  * ModelingDemo.tcl: demonstrates creation of simple shape and displaying it in HLR mode
-  * VisualizationDemo.tcl: demonstrates use of 3d viewer
-  * challenge.tcl: creates solid shape looking like abbreviation "CAD"
-  * bottle.tcl: creates bottle as in OCCT Tutorial
-  * drill.tcl: creates twist drill bit shape
-  * mill.tcl: creates milling cutter shape
-  * raytrace.tcl: demonstrates use of ray tracing display in 3d viewer
-
-**Getting Help**
-
-1. Type *help* to see all available commands
-2. Type *help \<command_name\>* to find out the arguments for a given command
-
-@subsection OCCT_OVW_SECTION_7_3 Programming Samples
-
-@subsubsection OCCT_OVW_SECTION_7_3_1 MFC 
-
-Visual C++ programming samples containing 10 Visual C++ projects 
-illustrating how to use a particular module or functionality.
-
-The list of MFC samples:
-
-  * Geometry
-  * Modeling
-  * Viewer2d
-  * Viewer3d
-  * ImportExport
-  * Ocaf
-  * Triangulation
-  * HLR
-  * Animation
-  * Convert
-
-@image html /overview/images/overview_mvc.png
-@image latex /overview/images/overview_mvc.png
-
-**Remarks:**
-
-  * MFC samples are available only on Windows platform;
-  * To start a sample use Open CASCADE Technology\\Samples\\Mfc\\ item of the Start\\Programs menu;
-  * Read carefully readme.txt to learn about launching and compilation options.
-
-See \subpage samples_mfc_standard "Readme" for details.
-
-@subsubsection OCCT_OVW_SECTION_7_3_2 Qt
-
-OCCT contains three samples based on Qt application framework
-
- Import Export
--------------
-
- Import Export programming sample contains 3D Viewer and Import / Export functionality.
-
-@image html /overview/images/overview_qt.png
-@image latex /overview/images/overview_qt.png
-
- Tutorial
----------
-
-The Qt programming tutorial teaches how to use Open CASCADE Technology services to model a 3D object. 
-The purpose of the tutorial is not to explain all OCCT classes but 
-to help start thinking in terms of the Open CASCADE Technology.
-
-This tutorial assumes that  the user has experience in using and setting up C++. 
-From the viewpoint of programming, Open CASCADE Technology is designed 
-to enhance user's C++ tools with high performance modeling classes, methods and functions. 
-The combination of these resources allows creating substantial applications.
-
-**See also:** @ref occt__tutorial "OCCT Tutorial" 
-
- Voxel
-------
-
-This is a demonstration application showing OCCT voxel models. It also includes a set of non-regression tests and other commands for testing this functionality (accessible only through TEST pre-processor definition).
-
-**See also:** <a href="occt_voxels_wp.html">Voxels User's guide</a> 
-
-**Remarks:**
-
-  * Qt samples are available on all supported platforms;
-  * To start a sample on Windows use Open CASCADE Technology\\Samples\\Qt\\ item of the Start\\Programs menu.
-
-@subsubsection OCCT_OVW_SECTION_7_3_3 C#
-
-C# sample demonstrates integration of OCCT 3D Viewer and Import / Export functionality into .NET applications (using Windows Forms and WPF front ends).
-
-@image html /overview/images/overview_c__ie.png
-@image latex /overview/images/overview_c__ie.png
-
-Import:
-
-  * BRep
-  * Iges
-  * Step
-
-Export: 
-
-  * Brep
-  * Iges
-  * Step
-  * Stl
-  * Vrml
-
-See \subpage samples_csharp "Readme" for details.
-

dox/resources/index.html

@@ -1,9 +0,0 @@
-<!DOCTYPE html>
-<html>
-  <head>
-    <meta http-equiv="Content-Type" content="text/html;charset=utf-8">
-    <meta http-equiv="refresh" content="0;URL=html/index.html">
-  </head>
-  <body>
-  </body>
-</html>

dox/resources/occt_pdf_template.tex

@@ -1,145 +0,0 @@
-\batchmode
-\nonstopmode
-\documentclass[oneside]{article}
-\n
-% Packages required by doxygen
-\usepackage{calc}
-\usepackage{doxygen}
-\usepackage{graphicx}
-\usepackage[utf8]{inputenc}
-\usepackage{makeidx}
-\usepackage{multicol}
-\usepackage{multirow}
-\usepackage{textcomp}
-\usepackage{amsmath}
-\usepackage[table]{xcolor}
-\usepackage{indentfirst}
-
-% Font selection
-\usepackage[T1]{fontenc}
-\usepackage{mathptmx}
-\usepackage[scaled=.90]{helvet}
-\usepackage{courier}
-\usepackage{amssymb}
-\usepackage{sectsty}
-\renewcommand{\familydefault}{\sfdefault}
-\allsectionsfont{%
-  \fontseries{bc}\selectfont%
-  \color{darkgray}%
-}
-\renewcommand{\DoxyLabelFont}{%
-  \fontseries{bc}\selectfont%
-  \color{darkgray}%
-}
-
-% Page & text layout
-\usepackage{geometry}
-\geometry{%
-  a4paper,%
-  top=2.5cm,%
-  bottom=2.5cm,%
-  left=2.5cm,%
-  right=2.5cm%
-}
-\tolerance=750
-\hfuzz=15pt
-\hbadness=750
-\setlength{\emergencystretch}{15pt}
-\setlength{\parindent}{0cm}
-\setlength{\parskip}{0.2cm}
-\makeatletter
-\renewcommand{\paragraph}{%
-  \@startsection{paragraph}{4}{0ex}{-1.0ex}{1.0ex}{%
-\normalfont\normalsize\bfseries\SS@parafont%
-  }%
-}
-\renewcommand{\subparagraph}{%
-  \@startsection{subparagraph}{5}{0ex}{-1.0ex}{1.0ex}{%
-\normalfont\normalsize\bfseries\SS@subparafont%
-  }%
-}
-\makeatother
-
-% Headers & footers
-\usepackage{fancyhdr}
-\pagestyle{fancyplain}
-\fancyhead[LE]{\fancyplain{}{\bfseries\thepage}}
-\fancyhead[CE]{\fancyplain{}{}}
-\fancyhead[RE]{\fancyplain{}{\bfseries\leftmark}}
-\fancyhead[LO]{\fancyplain{}{\bfseries\rightmark}}
-\fancyhead[CO]{\fancyplain{}{}}
-\fancyhead[RO]{\fancyplain{}{\bfseries\thepage}}
-\fancyfoot[LE]{\fancyplain{}{}}
-\fancyfoot[CE]{\fancyplain{}{}}
-\fancyfoot[RE]{\fancyplain{}{\bfseries\scriptsize (c) Open CASCADE DEFYEAR}}
-\fancyfoot[LO]{\fancyplain{}{\bfseries\scriptsize (c) Open CASCADE DEFYEAR}}
-\fancyfoot[CO]{\fancyplain{}{}}
-\fancyfoot[RO]{\fancyplain{}{}}
-\renewcommand{\footrulewidth}{0.4pt}
-\renewcommand{\sectionmark}[1]{%
-  \markright{\thesection\ #1}%
-}
-
-% Indices & bibliography
-\usepackage{natbib}
-\usepackage[titles]{tocloft}
-\renewcommand{\cftsecleader}{\cftdotfill{\cftdotsep}}
-\setcounter{tocdepth}{3}
-\setcounter{secnumdepth}{5}
-\makeindex
-
-% Hyperlinks (required, but should be loaded last)
-\usepackage{ifpdf}
-\ifpdf
-  \usepackage[pdftex,pagebackref=true]{hyperref}
-\else
-  \usepackage[ps2pdf,pagebackref=true]{hyperref}
-\fi
-\hypersetup{%
-  colorlinks=true,%
-  linkcolor=black,%
-  citecolor=black,%
-  urlcolor=blue,%
-  unicode%
-}
-
-% Custom commands
-\newcommand{\clearemptydoublepage}{%
-  \newpage{\pagestyle{empty}\cleardoublepage}%
-}
-\n
-%===== C O N T E N T S =====\n
-\begin{document}
-% Titlepage & ToC
-\hypersetup{pageanchor=false}
-\pagenumbering{roman}
-\begin{titlepage}
-\vspace*{7cm}
-\begin{center}%
-\includegraphics[width=0.75\textwidth, height=0.2\textheight]{../../../dox/resources/occt_logo.png}\\
-{\Large Open C\-A\-S\-C\-A\-D\-E Technology \\\\\Large DEFCASVERSION }\\
-\vspace*{1cm}
-{\Large DEFDOCLABEL}\\
-\vspace*{1cm}
-\vspace*{0.5cm}
-{\small \today}\
-\end{center}
-\end{titlepage}
-\clearpage
-\pagenumbering{roman}
-\tableofcontents
-\newpage
-\pagenumbering{arabic}
-\hypersetup{pageanchor=true}
-
-\let\stdsection\section
-  \renewcommand\section{\pagebreak\stdsection}
-\hypertarget{DEFFILENAME}{}
-\input{DEFFILENAME}
-
-% Index
-\newpage
-\phantomsection
-\addcontentsline{toc}{part}{Index}
-\printindex\n
-\end{document}

dox/resources/occt_rm.doxyfile

@@ -1,46 +0,0 @@
-DOXYFILE_ENCODING      = UTF-8
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-MULTILINE_CPP_IS_BRIEF = YES
-INHERIT_DOCS           = YES
-REPEAT_BRIEF           = YES
-ALWAYS_DETAILED_SEC    = NO
-INLINE_INHERITED_MEMB  = NO
-FULL_PATH_NAMES        = NO
-OPTIMIZE_OUTPUT_FOR_C  = YES
-SUBGROUPING            = YES
-DISTRIBUTE_GROUP_DOC   = YES
-EXTRACT_ALL            = YES
-EXTRACT_PRIVATE        = NO
-EXTRACT_LOCAL_CLASSES  = NO
-EXTRACT_LOCAL_METHODS  = NO
-HIDE_FRIEND_COMPOUNDS  = YES
-HIDE_UNDOC_MEMBERS     = NO
-INLINE_INFO            = YES
-VERBATIM_HEADERS       = NO
-QUIET                  = YES
-WARNINGS               = NO
-ENABLE_PREPROCESSING   = YES
-MACRO_EXPANSION        = YES
-EXPAND_ONLY_PREDEF     = YES
-PREDEFINED             = Standard_EXPORT __Standard_API __Draw_API Handle(a):=Handle<a> DEFINE_STANDARD_ALLOC DEFINE_NCOLLECTION_ALLOC
-GENERATE_HTML          = YES
-GENERATE_LATEX         = NO
-SEARCH_INCLUDES        = YES
-ALLEXTERNALS           = NO
-EXTERNAL_GROUPS        = NO
-COLLABORATION_GRAPH    = NO
-ENABLE_PREPROCESSING   = YES
-INCLUDE_FILE_PATTERNS  = *.hxx *.pxx
-EXCLUDE_PATTERNS       = */Handle_*.hxx
-SKIP_FUNCTION_MACROS   = YES
-INLINE_SOURCES         = NO
-HAVE_DOT               = YES
-DOT_GRAPH_MAX_NODES    = 100
-INCLUDE_GRAPH          = NO
-INCLUDED_BY_GRAPH      = NO
-DOT_MULTI_TARGETS      = YES
-DOT_IMAGE_FORMAT       = png
-GENERATE_LEGEND        = YES
-DOT_CLEANUP            = YES
-GRAPHICAL_HIERARCHY    = NO

dox/resources/occt_ug_html.doxyfile

@@ -1,60 +0,0 @@
-DOXYFILE_ENCODING      = UTF-8
-PROJECT_NAME           = "Open CASCADE Technology"
-PROJECT_BRIEF          = 
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-ABBREVIATE_BRIEF       = 
-FULL_PATH_NAMES        = YES
-INHERIT_DOCS           = YES
-TAB_SIZE               = 4
-MARKDOWN_SUPPORT       = YES
-EXTRACT_ALL            = YES
-CASE_SENSE_NAMES       = NO
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = YES
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = YES
-WARN_IF_DOC_ERROR      = YES
-WARN_NO_PARAMDOC       = NO
-WARN_FORMAT            = \\$file:\$line: \$text\
-INPUT_ENCODING         = UTF-8
-FILE_PATTERNS          = *.md *.dox 
-RECURSIVE              = YES
-SOURCE_BROWSER         = NO
-INLINE_SOURCES         = YES
-COLS_IN_ALPHA_INDEX    = 5
-GENERATE_DOCSET        = NO
-GENERATE_CHI           = NO
-GENERATE_QHP           = NO
-GENERATE_ECLIPSEHELP   = NO
-GENERATE_RTF           = NO
-GENERATE_MAN           = NO
-GENERATE_XML           = NO
-GENERATE_DOCBOOK       = NO
-GENERATE_AUTOGEN_DEF   = NO
-GENERATE_PERLMOD       = NO
-STRIP_CODE_COMMENTS    = NO
-GENERATE_LATEX         = NO
-GENERATE_HTMLHELP      = NO
-GENERATE_HTML          = YES
-HTML_COLORSTYLE_HUE    = 220
-HTML_COLORSTYLE_SAT    = 100
-HTML_COLORSTYLE_GAMMA  = 80
-HTML_TIMESTAMP         = YES
-HTML_DYNAMIC_SECTIONS  = YES
-HTML_INDEX_NUM_ENTRIES = 100
-DISABLE_INDEX          = YES
-GENERATE_TREEVIEW      = YES
-ENUM_VALUES_PER_LINE   = 8
-TREEVIEW_WIDTH         = 250
-EXTERNAL_PAGES         = NO
-SEARCHDATA_FILE        = searchdata.xml
-SKIP_FUNCTION_MACROS   = YES
-FORMULA_FONTSIZE       = 12
-FORMULA_TRANSPARENT    = YES
-USE_MATHJAX            = YES
-MATHJAX_FORMAT         = HTML-CSS
-
-# Define alias for inserting images in uniform way (both HTML and PDF)
-ALIASES += figure{1}="\image html \1 \n"
-ALIASES += figure{2}="\image html \1 \2 \n"

dox/resources/occt_ug_pdf.doxyfile

@@ -1,53 +0,0 @@
-DOXYFILE_ENCODING      = UTF-8
-PROJECT_NAME           = "Open CASCADE Technology"
-PROJECT_BRIEF          = 
-CREATE_SUBDIRS         = NO
-OUTPUT_LANGUAGE        = English
-ABBREVIATE_BRIEF       = 
-FULL_PATH_NAMES        = YES
-INHERIT_DOCS           = YES
-TAB_SIZE               = 4
-MARKDOWN_SUPPORT       = YES
-EXTRACT_ALL            = YES
-CASE_SENSE_NAMES       = NO
-INLINE_INFO            = YES
-SORT_MEMBER_DOCS       = YES
-WARNINGS               = YES
-WARN_IF_UNDOCUMENTED   = YES
-WARN_IF_DOC_ERROR      = YES
-WARN_NO_PARAMDOC       = NO
-WARN_FORMAT            = \\$file:\$line: \$text\
-INPUT_ENCODING         = UTF-8
-FILE_PATTERNS          = *.md *.dox 
-RECURSIVE              = YES
-SOURCE_BROWSER         = NO
-INLINE_SOURCES         = YES
-COLS_IN_ALPHA_INDEX    = 5
-GENERATE_DOCSET        = NO
-GENERATE_CHI           = NO
-GENERATE_QHP           = NO
-GENERATE_ECLIPSEHELP   = NO
-GENERATE_RTF           = NO
-GENERATE_MAN           = NO
-GENERATE_XML           = NO
-GENERATE_DOCBOOK       = NO
-GENERATE_AUTOGEN_DEF   = NO
-GENERATE_PERLMOD       = NO
-STRIP_CODE_COMMENTS    = NO
-GENERATE_HTMLHELP      = NO
-GENERATE_HTML          = NO
-DISABLE_INDEX          = YES
-GENERATE_TREEVIEW      = NO
-PREDEFINED             = PDF_ONLY
-GENERATE_LATEX         = YES
-COMPACT_LATEX          = YES
-PDF_HYPERLINKS         = YES
-USE_PDFLATEX           = YES
-LATEX_BATCHMODE        = YES
-LATEX_OUTPUT           = latex
-LATEX_CMD_NAME         = latex
-MAKEINDEX_CMD_NAME     = makeindex
-
-# Define alias for inserting images in uniform way (both HTML and PDF)
-ALIASES += figure{1}="\image latex \1 \n"
-ALIASES += figure{2}="\image latex \1 \2 \n"

dox/start.tcl

@@ -0,0 +1,7 @@
+#!/usr/bin/tclsh
+
+# Command-line starter for occdoc command, use it as follows:
+# tclsh> source dox/start.tcl [arguments]
+
+source [file join [file dirname [info script]] occdoc.tcl]
+occdoc {*}$::argv

dox/tutorial/images/tutorial_image003.svg

@@ -9,12 +9,12 @@
    xmlns="http://www.w3.org/2000/svg"
    xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
    xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="465.60214"
-   height="182.46281"
+   width="744.09448819"
+   height="1052.3622047"
    id="svg2"
    version="1.1"
    inkscape:version="0.48.4 r9939"
-   sodipodi:docname="tutorial_image003.svg">
+   sodipodi:docname="ocaf.svg">
   <defs
      id="defs4">
     <clipPath
@@ -45,7 +45,7 @@
          height="22.583204"
          width="33.706238"
          y="12.49604"
-         x="316.59787" />
+         x="316.59788" />
     </clipPath>
     <clipPath
        id="clipEmfPath4"
@@ -55,7 +55,7 @@
          height="22.583204"
          width="33.856712"
          y="193.16167"
-         x="469.93115" />
+         x="469.93116" />
     </clipPath>
     <clipPath
        id="clipEmfPath5"
@@ -64,7 +64,7 @@
          id="rect3013"
          height="22.583204"
          width="33.856712"
-         y="97.258331"
+         y="97.258332"
          x="382.35513" />
     </clipPath>
     <clipPath
@@ -72,40 +72,40 @@
        clipPathUnits="userSpaceOnUse">
       <rect
          id="rect3132"
-         height="44.154423"
+         height="44.154422"
          width="125.37695"
          y="131.71234"
-         x="271.49973" />
+         x="271.49972" />
     </clipPath>
     <clipPath
        id="clipEmfPath2-7"
        clipPathUnits="userSpaceOnUse">
       <rect
          id="rect3135"
-         height="44.154423"
+         height="44.154422"
          width="125.37695"
          y="212.8123"
-         x="271.49973" />
+         x="271.49972" />
     </clipPath>
     <clipPath
        id="clipEmfPath3-4"
        clipPathUnits="userSpaceOnUse">
       <rect
          id="rect3138"
-         height="44.154423"
+         height="44.154422"
          width="107.3371"
          y="212.8123"
-         x="433.85834" />
+         x="433.85835" />
     </clipPath>
     <clipPath
        id="clipEmfPath4-0"
        clipPathUnits="userSpaceOnUse">
       <rect
          id="rect3141"
-         height="17.121101"
-         width="549.31335"
+         height="17.121102"
+         width="549.31338"
          y="293.91226"
-         x="0.90199244" />
+         x="0.90199242" />
     </clipPath>
     <clipPath
        id="clipEmfPath5-9"
@@ -113,8 +113,8 @@
       <rect
          id="rect3144"
          height="18.022213"
-         width="333.73721"
-         y="338.51724"
+         width="333.7372"
+         y="338.51723"
          x="72.61039" />
     </clipPath>
     <clipPath
@@ -123,8 +123,8 @@
       <rect
          id="rect3147"
          height="18.022213"
-         width="342.75711"
-         y="374.56165"
+         width="342.75712"
+         y="374.56166"
          x="72.61039" />
     </clipPath>
     <clipPath
@@ -166,20 +166,16 @@
      inkscape:pageopacity="0.0"
      inkscape:pageshadow="2"
      inkscape:zoom="1"
-     inkscape:cx="362.08678"
-     inkscape:cy="-11.625728"
+     inkscape:cx="375"
+     inkscape:cy="845.71429"
      inkscape:document-units="px"
      inkscape:current-layer="layer1"
      showgrid="false"
-     inkscape:window-width="1920"
-     inkscape:window-height="1028"
-     inkscape:window-x="-8"
-     inkscape:window-y="-8"
-     inkscape:window-maximized="1"
-     fit-margin-top="1"
-     fit-margin-left="1"
-     fit-margin-right="1"
-     fit-margin-bottom="1" />
+     inkscape:window-width="1065"
+     inkscape:window-height="932"
+     inkscape:window-x="113"
+     inkscape:window-y="14"
+     inkscape:window-maximized="0" />
   <metadata
      id="metadata7">
     <rdf:RDF>
@@ -188,15 +184,14 @@
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
+        <dc:title></dc:title>
       </cc:Work>
     </rdf:RDF>
   </metadata>
   <g
      inkscape:label="Layer 1"
      inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-12.913221,-12.559351)">
+     id="layer1">
     <g
        id="g2989" />
     <g

dox/tutorial/tutorial.md

@@ -1,4 +1,4 @@
- Tutorial {#occt__tutorial}
+ Tutorial {#tutorial}
 =======
 
 @tableofcontents
@@ -52,7 +52,7 @@ This modeling requires four steps:
 
 To create the bottle's profile, you first create characteristic points with their coordinates as shown below in the (XOY) plane. These points will be the supports that define the geometry of the profile.
 
-@figure{tutorial/images/tutorial_image003.svg}
+@figure{/tutorial/images/tutorial_image003.svg}
 
 There are two classes to describe a 3D Cartesian point from its X, Y and Z coordinates in Open CASCADE Technology:
 

dox/user_guides/boolean_operations/images/boolean_image001.svg

@@ -1,173 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="169.595"
-   height="115.66244"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="boolean_image001.svg">
-  <defs
-     id="defs4">
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect2990"
-         height="17.998533"
-         width="17.278183"
-         y="14.642874"
-         x="3.1828232" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect2993"
-         height="18.151062"
-         width="17.429747"
-         y="17.388412"
-         x="54.86581" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="1"
-     inkscape:cx="49.849591"
-     inkscape:cy="76.436836"
-     inkscape:document-units="px"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="1042"
-     inkscape:window-height="640"
-     inkscape:window-x="18"
-     inkscape:window-y="263"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata7">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-99.629249,-395.59893)">
-    <g
-       id="g2995"
-       transform="matrix(2.2499232,0,0,2.2499232,101.67528,395.53094)">
-      <text
-         id="text2997"
-         style="font-size:13.94379711px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Calibri"
-         y="12.507455"
-         x="-0.90937805"
-         xml:space="preserve"> </text>
-      <path
-         id="path2999"
-         d="m 25.415222,0.49572229 c -13.84907,0 -25.07420523,11.29674871 -25.07420523,25.23417171 0,13.937423 11.22513523,25.234171 25.07420523,25.234171 13.84907,0 25.074205,-11.296748 25.074205,-25.234171 0,-13.937423 -11.225135,-25.23417171 -25.074205,-25.23417171"
-         style="fill:none;stroke:#000000;stroke-width:0.94726878px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3001"
-         d="m 24.941588,20.772671 c -2.491317,0 -4.518473,2.040088 -4.518473,4.547298 0,2.507211 2.027156,4.537766 4.518473,4.537766 2.491317,0 4.518472,-2.030555 4.518472,-4.537766 0,-2.50721 -2.027155,-4.547298 -4.518472,-4.547298"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3003"
-         d="m 24.941588,20.772671 c -2.491317,0 -4.518473,2.040088 -4.518473,4.547298 0,2.507211 2.027156,4.537766 4.518473,4.537766 2.491317,0 4.518472,-2.030555 4.518472,-4.537766 0,-2.50721 -2.027155,-4.547298 -4.518472,-4.547298"
-         style="fill:none;stroke:#000000;stroke-width:2.84180641px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3005"
-         style="font-size:13.94379711px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="27.60792"
-         x="3.1828232"
-         xml:space="preserve">V</text>
-      <text
-         id="text3007"
-         style="font-size:8.79065418px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="29.590809"
-         x="12.428167"
-         xml:space="preserve">1</text>
-      <text
-         id="text3009"
-         style="font-size:13.94379711px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="27.60792"
-         x="17.429747"
-         xml:space="preserve"> </text>
-      <path
-         id="path3011"
-         d="m 50.11052,0.49572229 c -13.84907,0 -25.074206,11.29674871 -25.074206,25.23417171 0,13.937423 11.225136,25.234171 25.074206,25.234171 13.84907,0 25.064732,-11.296748 25.064732,-25.234171 0,-13.937423 -11.215662,-25.23417171 -25.064732,-25.23417171"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:none;stroke:#000000;stroke-width:0.94726878px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3013"
-         d="m 49.636885,20.772671 c -2.491317,0 -4.518472,2.040088 -4.518472,4.547298 0,2.507211 2.027155,4.537766 4.518472,4.537766 2.491317,0 4.509,-2.030555 4.509,-4.537766 0,-2.50721 -2.017683,-4.547298 -4.509,-4.547298"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path3015"
-         d="m 49.636885,20.772671 c -2.491317,0 -4.518472,2.040088 -4.518472,4.547298 0,2.507211 2.027155,4.537766 4.518472,4.537766 2.491317,0 4.509,-2.030555 4.509,-4.537766 0,-2.50721 -2.017683,-4.547298 -4.509,-4.547298"
-         style="fill:none;stroke:#000000;stroke-width:2.84180641px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text3017"
-         style="font-size:13.94379711px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="30.353456"
-         x="54.86581"
-         xml:space="preserve">V</text>
-      <text
-         id="text3019"
-         style="font-size:8.79065418px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="32.336346"
-         x="64.111153"
-         xml:space="preserve">2</text>
-      <text
-         id="text3021"
-         style="font-size:13.94379711px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Arial"
-         y="30.353456"
-         x="69.112732"
-         xml:space="preserve"> </text>
-      <path
-         id="path2999-0"
-         d="m 48.910577,0.49552764 c -13.84907,0 -25.074205,11.29674836 -25.074205,25.23417136 0,13.937423 11.225135,25.234171 25.074205,25.234171 13.849066,0 25.074206,-11.296748 25.074206,-25.234171 0,-13.937423 -11.22514,-25.23417136 -25.074206,-25.23417136"
-         style="fill:none;stroke:#000000;stroke-width:0.94726878px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         sodipodi:type="arc"
-         style="fill:#ffffff;stroke:#ffffff;stroke-width:0.105;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-         id="path4048"
-         sodipodi:cx="28.721825"
-         sodipodi:cy="25.876774"
-         sodipodi:rx="3.368609"
-         sodipodi:ry="3.368609"
-         d="m 32.090434,25.876774 c 0,1.860431 -1.508178,3.368609 -3.368609,3.368609 -1.860432,0 -3.368609,-1.508178 -3.368609,-3.368609 0,-1.860432 1.508177,-3.368609 3.368609,-3.368609 1.860431,0 3.368609,1.508177 3.368609,3.368609 z"
-         transform="translate(-4.1006914,-0.50166522)" />
-    </g>
-  </g>
-</svg>

dox/user_guides/boolean_operations/images/boolean_image010.svg

@@ -1,210 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="194.92216"
-   height="180.60326"
-   id="svg5925"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="New document 17">
-  <defs
-     id="defs5927">
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect5960"
-         height="189.81496"
-         width="566.85828"
-         y="0"
-         x="0" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect5963"
-         height="15.905443"
-         width="26.550388"
-         y="34.661861"
-         x="70.801033" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect5966"
-         height="15.755392"
-         width="26.70039"
-         y="89.88076"
-         x="143.8521" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="2.6743432"
-     inkscape:cx="56.701334"
-     inkscape:cy="90.302547"
-     inkscape:document-units="px"
-     inkscape:current-layer="g5968"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="1099"
-     inkscape:window-height="774"
-     inkscape:window-x="132"
-     inkscape:window-y="132"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata5930">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-379.68462,-739.20433)">
-    <g
-       id="g5937" />
-    <g
-       id="g5948" />
-    <g
-       id="g5968"
-       transform="translate(355.90361,729.99263)">
-      <text
-         id="text5970"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="189.81496"
-         x="218.70319"
-         xml:space="preserve"> </text>
-      <path
-         id="path5972"
-         d="m 70.744783,34.624349 0,15.942956 26.681639,0 0,-15.942956 -26.681639,0 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text5974"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="46.365868"
-         x="77.851135"
-         xml:space="preserve">E</text>
-      <text
-         id="text5976"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="48.316532"
-         x="86.101257"
-         xml:space="preserve">2</text>
-      <text
-         id="text5978"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="46.365868"
-         x="90.301315"
-         xml:space="preserve"> </text>
-      <path
-         id="path5980"
-         d="m 143.87085,89.76822 0,15.88669 26.62539,0 0,-15.88669 -26.62539,0 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text5982"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="101.73481"
-         x="150.90221"
-         xml:space="preserve">E</text>
-      <text
-         id="text5984"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="103.68548"
-         x="159.15231"
-         xml:space="preserve">1</text>
-      <text
-         id="text5986"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="101.73481"
-         x="163.35239"
-         xml:space="preserve"> </text>
-      <path
-         id="path5988"
-         d="m 94.745133,16.993315 0,157.619565"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path5990"
-         d="m 94.145125,10.616133 c -1.950029,0 -3.525052,1.584917 -3.525052,3.535585 0,1.950667 1.575023,3.535585 3.525052,3.535585 1.959403,0 3.534426,-1.584918 3.534426,-3.535585 0,-1.950668 -1.575023,-3.535585 -3.534426,-3.535585"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path5992"
-         d="m 94.145125,10.616133 c -1.950029,0 -3.525052,1.584917 -3.525052,3.535585 0,1.950667 1.575023,3.535585 3.525052,3.535585 1.959403,0 3.534426,-1.584918 3.534426,-3.535585 0,-1.950668 -1.575023,-3.535585 -3.534426,-3.535585"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path5994"
-         d="m 94.52013,171.98698 c -1.950028,0 -3.525051,1.58492 -3.525051,3.53559 0,1.95066 1.575023,3.5262 3.525051,3.5262 1.959404,0 3.534427,-1.57554 3.534427,-3.5262 0,-1.95067 -1.575023,-3.53559 -3.534427,-3.53559"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path5996"
-         d="m 94.52013,171.98698 c -1.950028,0 -3.525051,1.58492 -3.525051,3.53559 0,1.95066 1.575023,3.5262 3.525051,3.5262 1.959404,0 3.534427,-1.57554 3.534427,-3.5262 0,-1.95067 -1.575023,-3.53559 -3.534427,-3.53559"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path5998"
-         d="M 31.491085,109.48122 188.99338,109.07795"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6000"
-         d="m 25.181618,110.16582 c 0,1.96943 1.584398,3.55435 3.534426,3.55435 1.950029,-0.009 3.534427,-1.60368 3.525052,-3.5731 0,-1.96943 -1.584398,-3.56372 -3.534427,-3.55434 -1.959403,0 -3.534426,1.60367 -3.525051,3.57309"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6002"
-         d="m 25.181618,110.16582 c 0,1.96943 1.584398,3.55435 3.534426,3.55435 1.950029,-0.009 3.534427,-1.60368 3.525052,-3.5731 0,-1.96943 -1.584398,-3.56372 -3.534427,-3.55434 -1.959403,0 -3.534426,1.60367 -3.525051,3.57309"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6004"
-         d="m 186.36835,109.34992 c 0.009,1.96942 1.59377,3.56372 3.5438,3.55434 1.95003,0 3.52505,-1.60367 3.51567,-3.5731 0,-1.96942 -1.58439,-3.55434 -3.53442,-3.55434 -1.95003,0.009 -3.52505,1.60368 -3.52505,3.5731"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6006"
-         d="m 186.36835,109.34992 c 0.009,1.96942 1.59377,3.56372 3.5438,3.55434 1.95003,0 3.52505,-1.60367 3.51567,-3.5731 0,-1.96942 -1.58439,-3.55434 -3.53442,-3.55434 -1.95003,0.009 -3.52505,1.60368 -3.52505,3.5731"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-    </g>
-    <path
-       style="fill:none;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="m 70.297635,8.9723282 0,153.3086718"
-       id="path6038"
-       inkscape:connector-curvature="0"
-       transform="translate(379.68462,739.20433)" />
-  </g>
-</svg>

dox/user_guides/boolean_operations/images/boolean_image011.svg

@@ -1,322 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="187.048"
-   height="184.22337"
-   id="svg6570"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="New document 24">
-  <defs
-     id="defs6572">
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect6583"
-         height="189.81496"
-         width="566.85828"
-         y="0"
-         x="0" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect6586"
-         height="16.055494"
-         width="26.550388"
-         y="110.13769"
-         x="111.30163" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect6589"
-         height="15.905443"
-         width="26.70039"
-         y="148.85094"
-         x="77.101128" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath4"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect6592"
-         height="15.905443"
-         width="26.70039"
-         y="86.579628"
-         x="47.100689" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath5"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect6595"
-         height="15.755392"
-         width="26.550388"
-         y="86.279526"
-         x="151.80222" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath6"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect6598"
-         height="15.905443"
-         width="26.70039"
-         y="32.561142"
-         x="71.851051" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="2.817206"
-     inkscape:cx="35.662879"
-     inkscape:cy="92.112538"
-     inkscape:document-units="px"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="1132"
-     inkscape:window-height="778"
-     inkscape:window-x="110"
-     inkscape:window-y="110"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata6575">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(76.37877,-320.25135)">
-    <g
-       id="g6600"
-       transform="translate(-108.03395,314.65977)">
-      <text
-         id="text6602"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="189.81496"
-         x="218.70319"
-         xml:space="preserve"> </text>
-      <path
-         id="path6604"
-         d="m 111.24537,110.15645 0,15.99922 26.62539,0 0,-15.99922 -26.62539,0 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text6606"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="121.8417"
-         x="114.60167"
-         xml:space="preserve">Vn</text>
-      <text
-         id="text6608"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="123.79236"
-         x="130.50191"
-         xml:space="preserve">1</text>
-      <text
-         id="text6610"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="121.8417"
-         x="134.70197"
-         xml:space="preserve"> </text>
-      <path
-         id="path6612"
-         d="m 77.119876,148.85094 0,15.88668 26.625384,0 0,-15.88668 -26.625384,0 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text6614"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="160.55495"
-         x="82.201202"
-         xml:space="preserve">E</text>
-      <text
-         id="text6616"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="162.50562"
-         x="90.451324"
-         xml:space="preserve">21</text>
-      <text
-         id="text6618"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="160.55495"
-         x="98.701439"
-         xml:space="preserve"> </text>
-      <path
-         id="path6620"
-         d="m 47.119438,86.523359 0,15.942961 26.625389,0 0,-15.942961 -26.625389,0 z"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text6622"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.28363"
-         x="52.200764"
-         xml:space="preserve">E</text>
-      <text
-         id="text6624"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="100.2343"
-         x="60.450882"
-         xml:space="preserve">11</text>
-      <text
-         id="text6626"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.28363"
-         x="68.701004"
-         xml:space="preserve"> </text>
-      <path
-         id="path6628"
-         d="m 151.74597,86.148231 0,15.877309 26.62538,0 0,-15.877309 -26.62538,0 z"
-         clip-path="url(#clipEmfPath4)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text6630"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.133583"
-         x="156.90228"
-         xml:space="preserve">E</text>
-      <text
-         id="text6632"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="100.08425"
-         x="165.1524"
-         xml:space="preserve">12</text>
-      <text
-         id="text6634"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.133583"
-         x="173.40253"
-         xml:space="preserve"> </text>
-      <path
-         id="path6636"
-         d="m 71.869799,32.504874 0,15.942955 26.625389,0 0,-15.942955 -26.625389,0 z"
-         clip-path="url(#clipEmfPath5)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text6638"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.265148"
-         x="76.951126"
-         xml:space="preserve">E</text>
-      <text
-         id="text6640"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="46.215816"
-         x="85.201241"
-         xml:space="preserve">22</text>
-      <text
-         id="text6642"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.265148"
-         x="93.451363"
-         xml:space="preserve"> </text>
-      <path
-         id="path6644"
-         d="m 102.62025,13.373326 0,157.553914"
-         clip-path="url(#clipEmfPath6)"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6646"
-         d="m 102.02024,6.9961442 c -1.95003,0 -3.525052,1.5755391 -3.525052,3.5262068 0,1.960046 1.575022,3.535585 3.525052,3.535585 1.9594,0 3.53443,-1.575539 3.53443,-3.535585 0,-1.9506677 -1.57503,-3.5262068 -3.53443,-3.5262068"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6648"
-         d="m 102.02024,6.9961442 c -1.95003,0 -3.525052,1.5755391 -3.525052,3.5262068 0,1.960046 1.575022,3.535585 3.525052,3.535585 1.9594,0 3.53443,-1.575539 3.53443,-3.535585 0,-1.9506677 -1.57503,-3.5262068 -3.53443,-3.5262068"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6650"
-         d="m 102.39525,168.30134 c -1.95003,0 -3.525056,1.57554 -3.525056,3.52621 0,1.96005 1.575026,3.53559 3.525056,3.53559 1.9594,0 3.53442,-1.57554 3.53442,-3.53559 0,-1.95067 -1.57502,-3.52621 -3.53442,-3.52621"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6652"
-         d="m 102.39525,168.30134 c -1.95003,0 -3.525056,1.57554 -3.525056,3.52621 0,1.96005 1.575026,3.53559 3.525056,3.53559 1.9594,0 3.53442,-1.57554 3.53442,-3.53559 0,-1.95067 -1.57502,-3.52621 -3.53442,-3.52621"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6654"
-         d="m 39.3662,105.9175 157.5023,-0.40327"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6656"
-         d="m 33.056733,106.53646 c 0,1.93191 1.584398,3.49807 3.534426,3.48869 1.950029,0 3.534427,-1.57554 3.525052,-3.50745 0,-1.93191 -1.584398,-3.49807 -3.534427,-3.48869 -1.959403,0 -3.534426,1.57554 -3.525051,3.50745"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6658"
-         d="m 33.056733,106.53646 c 0,1.93191 1.584398,3.49807 3.534426,3.48869 1.950029,0 3.534427,-1.57554 3.525052,-3.50745 0,-1.93191 -1.584398,-3.49807 -3.534427,-3.48869 -1.959403,0 -3.534426,1.57554 -3.525051,3.50745"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6660"
-         d="m 194.24346,105.72055 c 0.009,1.94129 1.59377,3.49808 3.5438,3.49808 1.95003,-0.009 3.52505,-1.57554 3.51568,-3.50745 0,-1.94129 -1.5844,-3.49808 -3.53443,-3.49808 -1.95003,0.009 -3.52505,1.57554 -3.52505,3.50745"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6662"
-         d="m 194.24346,105.72055 c 0.009,1.94129 1.59377,3.49808 3.5438,3.49808 1.95003,-0.009 3.52505,-1.57554 3.51568,-3.50745 0,-1.94129 -1.5844,-3.49808 -3.53443,-3.49808 -1.95003,0.009 -3.52505,1.57554 -3.52505,3.50745"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6664"
-         d="m 102.46087,101.58476 c -1.95003,0 -3.534426,1.58492 -3.534426,3.53559 0,1.95067 1.584396,3.53558 3.534426,3.53558 1.95003,0 3.53443,-1.58491 3.53443,-3.53558 0,-1.95067 -1.5844,-3.53559 -3.53443,-3.53559"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path6666"
-         d="m 102.46087,101.58476 c -1.95003,0 -3.534426,1.58492 -3.534426,3.53559 0,1.95067 1.584396,3.53558 3.534426,3.53558 1.95003,0 3.53443,-1.58491 3.53443,-3.53558 0,-1.95067 -1.5844,-3.53559 -3.53443,-3.53559"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-    </g>
-    <path
-       style="fill:none;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="m -5.7414067,329.12368 0,86.61064"
-       id="path6720"
-       inkscape:connector-curvature="0" />
-    <path
-       style="fill:none;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none"
-       d="m -6.096368,423.89843 0.354961,59.98852"
-       id="path6722"
-       inkscape:connector-curvature="0" />
-  </g>
-</svg>

dox/user_guides/boolean_operations/images/boolean_image012.svg

@@ -1,231 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="187.048"
-   height="75.616943"
-   id="svg7232"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="New document 27">
-  <defs
-     id="defs7234">
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7245"
-         height="165.50787"
-         width="566.85828"
-         y="0"
-         x="0" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7248"
-         height="16.055614"
-         width="26.550388"
-         y="110.13851"
-         x="111.30163" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7251"
-         height="15.905562"
-         width="26.70039"
-         y="86.580276"
-         x="47.100689" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath4"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7254"
-         height="15.755509"
-         width="26.550388"
-         y="86.280167"
-         x="151.80222" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="3.9400647"
-     inkscape:cx="52.151745"
-     inkscape:cy="37.80847"
-     inkscape:document-units="px"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="901"
-     inkscape:window-height="660"
-     inkscape:window-x="176"
-     inkscape:window-y="176"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata7237">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(42.093052,-363.12514)">
-    <g
-       id="g7256"
-       transform="translate(-73.748232,273.23421)">
-      <text
-         id="text7258"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="165.50787"
-         x="218.70319"
-         xml:space="preserve"> </text>
-      <path
-         id="path7260"
-         d="m 111.24537,110.15727 0,16.06499 26.62539,0 0,-16.06499 -26.62539,0 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text7262"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="121.8426"
-         x="114.60167"
-         xml:space="preserve">Vn</text>
-      <text
-         id="text7264"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="123.79329"
-         x="130.50191"
-         xml:space="preserve">1</text>
-      <text
-         id="text7266"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="121.8426"
-         x="134.70197"
-         xml:space="preserve"> </text>
-      <path
-         id="path7268"
-         d="m 47.119438,86.524005 0,15.943075 26.625389,0 0,-15.943075 -26.625389,0 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text7270"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.28437"
-         x="52.200764"
-         xml:space="preserve">E</text>
-      <text
-         id="text7272"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="100.23505"
-         x="60.450882"
-         xml:space="preserve">11</text>
-      <text
-         id="text7274"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.28437"
-         x="68.701004"
-         xml:space="preserve"> </text>
-      <path
-         id="path7276"
-         d="m 151.74597,86.148874 0,15.877426 26.62538,0 0,-15.877426 -26.62538,0 z"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text7278"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.134315"
-         x="156.90228"
-         xml:space="preserve">E</text>
-      <text
-         id="text7280"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="100.085"
-         x="165.1524"
-         xml:space="preserve">12</text>
-      <text
-         id="text7282"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="98.134315"
-         x="173.40253"
-         xml:space="preserve"> </text>
-      <path
-         id="path7284"
-         d="m 39.3662,105.97456 157.5023,-0.39389"
-         clip-path="url(#clipEmfPath4)"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7286"
-         d="m 33.056733,106.56539 c 0,1.95068 1.584398,3.53561 3.534426,3.52623 1.950029,0 3.534427,-1.58493 3.525052,-3.53561 0,-1.96006 -1.584398,-3.53561 -3.534427,-3.52623 -1.959403,0 -3.534426,1.58493 -3.525051,3.53561"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7288"
-         d="m 33.056733,106.56539 c 0,1.95068 1.584398,3.53561 3.534426,3.52623 1.950029,0 3.534427,-1.58493 3.525052,-3.53561 0,-1.96006 -1.584398,-3.53561 -3.534427,-3.52623 -1.959403,0 -3.534426,1.58493 -3.525051,3.53561"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7290"
-         d="m 194.24346,105.75886 c 0.009,1.95068 1.59377,3.52623 3.5438,3.51685 1.95003,0 3.52505,-1.58493 3.51568,-3.53561 0,-1.95068 -1.5844,-3.52623 -3.53443,-3.52623 -1.95003,0.009 -3.52505,1.5943 -3.52505,3.54499"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7292"
-         d="m 194.24346,105.75886 c 0.009,1.95068 1.59377,3.52623 3.5438,3.51685 1.95003,0 3.52505,-1.58493 3.51568,-3.53561 0,-1.95068 -1.5844,-3.52623 -3.53443,-3.52623 -1.95003,0.009 -3.52505,1.5943 -3.52505,3.54499"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7294"
-         d="m 102.46087,101.58552 c -1.95003,0 -3.534426,1.58493 -3.534426,3.53561 0,1.95069 1.584396,3.53561 3.534426,3.53561 1.95003,0 3.53443,-1.58492 3.53443,-3.53561 0,-1.95068 -1.5844,-3.53561 -3.53443,-3.53561"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7296"
-         d="m 102.46087,101.58552 c -1.95003,0 -3.534426,1.58493 -3.534426,3.53561 0,1.95069 1.584396,3.53561 3.534426,3.53561 1.95003,0 3.53443,-1.58492 3.53443,-3.53561 0,-1.95068 -1.5844,-3.53561 -3.53443,-3.53561"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-    </g>
-    <path
-       style="fill:none;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="M 8.121694,16.480859 67.257779,15.973253"
-       id="path7331"
-       inkscape:connector-curvature="0"
-       transform="translate(-42.093052,363.12514)" />
-    <path
-       style="fill:none;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="M 74.110458,15.71945 162.43388,14.958041"
-       id="path7333"
-       inkscape:connector-curvature="0"
-       transform="translate(-42.093052,363.12514)" />
-  </g>
-</svg>

dox/user_guides/boolean_operations/images/boolean_image013.svg

@@ -1,231 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="141.50281"
-   height="184.22337"
-   id="svg7843"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="New document 30">
-  <defs
-     id="defs7845">
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7856"
-         height="189.81496"
-         width="566.85828"
-         y="0"
-         x="0" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7859"
-         height="16.055494"
-         width="26.550388"
-         y="110.13769"
-         x="111.30163" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7862"
-         height="15.905443"
-         width="26.70039"
-         y="148.85094"
-         x="77.101128" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath4"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect7865"
-         height="15.905443"
-         width="26.70039"
-         y="32.561142"
-         x="71.851051" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="2.3178168"
-     inkscape:cx="0.42660899"
-     inkscape:cy="92.112538"
-     inkscape:document-units="px"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="902"
-     inkscape:window-height="840"
-     inkscape:window-x="223"
-     inkscape:window-y="76"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata7848">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-43.534308,-323.10849)">
-    <g
-       id="g7867"
-       transform="translate(-33.666065,317.51691)">
-      <text
-         id="text7869"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="189.81496"
-         x="218.70319"
-         xml:space="preserve"> </text>
-      <path
-         id="path7871"
-         d="m 111.30163,110.15645 0,15.99922 26.62538,0 0,-15.99922 -26.62538,0 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text7873"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="121.8417"
-         x="114.60167"
-         xml:space="preserve">Vn</text>
-      <text
-         id="text7875"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="123.79236"
-         x="130.50191"
-         xml:space="preserve">1</text>
-      <text
-         id="text7877"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="121.8417"
-         x="134.70197"
-         xml:space="preserve"> </text>
-      <path
-         id="path7879"
-         d="m 77.119876,148.85094 0,15.88668 26.625384,0 0,-15.88668 -26.625384,0 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text7881"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="160.55495"
-         x="82.201202"
-         xml:space="preserve">E</text>
-      <text
-         id="text7883"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="162.50562"
-         x="90.451324"
-         xml:space="preserve">21</text>
-      <text
-         id="text7885"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="160.55495"
-         x="98.701439"
-         xml:space="preserve"> </text>
-      <path
-         id="path7887"
-         d="m 71.869799,32.504874 0,15.942955 26.625389,0 0,-15.942955 -26.625389,0 z"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text7889"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.265148"
-         x="76.951126"
-         xml:space="preserve">E</text>
-      <text
-         id="text7891"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="46.215816"
-         x="85.201241"
-         xml:space="preserve">22</text>
-      <text
-         id="text7893"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.265148"
-         x="93.451363"
-         xml:space="preserve"> </text>
-      <path
-         id="path7895"
-         d="m 102.62025,13.373326 0,157.553914"
-         clip-path="url(#clipEmfPath4)"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7897"
-         d="m 102.02024,6.9961442 c -1.95003,0 -3.525052,1.5755391 -3.525052,3.5262068 0,1.960046 1.575022,3.535585 3.525052,3.535585 1.9594,0 3.53443,-1.575539 3.53443,-3.535585 0,-1.9506677 -1.57503,-3.5262068 -3.53443,-3.5262068"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7899"
-         d="m 102.02024,6.9961442 c -1.95003,0 -3.525052,1.5755391 -3.525052,3.5262068 0,1.960046 1.575022,3.535585 3.525052,3.535585 1.9594,0 3.53443,-1.575539 3.53443,-3.535585 0,-1.9506677 -1.57503,-3.5262068 -3.53443,-3.5262068"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7901"
-         d="m 102.39525,168.30134 c -1.95003,0 -3.525056,1.57554 -3.525056,3.52621 0,1.96005 1.575026,3.53559 3.525056,3.53559 1.9594,0 3.53442,-1.57554 3.53442,-3.53559 0,-1.95067 -1.57502,-3.52621 -3.53442,-3.52621"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7903"
-         d="m 102.39525,168.30134 c -1.95003,0 -3.525056,1.57554 -3.525056,3.52621 0,1.96005 1.575026,3.53559 3.525056,3.53559 1.9594,0 3.53442,-1.57554 3.53442,-3.53559 0,-1.95067 -1.57502,-3.52621 -3.53442,-3.52621"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7905"
-         d="m 102.46087,101.58476 c -1.95003,0 -3.534426,1.58492 -3.534426,3.53559 0,1.95067 1.584396,3.53558 3.534426,3.53558 1.95003,0 3.53443,-1.58491 3.53443,-3.53558 0,-1.95067 -1.5844,-3.53559 -3.53443,-3.53559"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path7907"
-         d="m 102.46087,101.58476 c -1.95003,0 -3.534426,1.58492 -3.534426,3.53559 0,1.95067 1.584396,3.53558 3.534426,3.53558 1.95003,0 3.53443,-1.58491 3.53443,-3.53558 0,-1.95067 -1.5844,-3.53559 -3.53443,-3.53559"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-    </g>
-    <path
-       style="fill:none;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="m 25.023548,8.6271 0,86.288095"
-       id="path7946"
-       inkscape:connector-curvature="0"
-       transform="translate(43.534308,323.10849)" />
-    <path
-       style="fill:none;stroke:#000000;stroke-width:2;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="m 25.454988,104.40689 0,57.38158"
-       id="path7948"
-       inkscape:connector-curvature="0"
-       transform="translate(43.534308,323.10849)" />
-  </g>
-</svg>

dox/user_guides/boolean_operations/images/boolean_image014.svg

@@ -1,205 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="204.41466"
-   height="137.59633"
-   id="svg8458"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="New document 33">
-  <defs
-     id="defs8460">
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect8471"
-         height="169.12204"
-         width="566.85828"
-         y="0"
-         x="0" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect8474"
-         height="15.742743"
-         width="26.70039"
-         y="140.93503"
-         x="159.60233" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect8477"
-         height="15.892674"
-         width="26.550388"
-         y="32.834866"
-         x="39.450577" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="3.5176879"
-     inkscape:cx="102.20076"
-     inkscape:cy="68.79519"
-     inkscape:document-units="px"
-     inkscape:current-layer="g8479"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="1015"
-     inkscape:window-height="672"
-     inkscape:window-x="44"
-     inkscape:window-y="44"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata8463">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(70.772185,-349.27533)">
-    <g
-       id="g8479"
-       transform="translate(-84.492153,318.18383)">
-      <text
-         id="text8481"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="168.97211"
-         x="218.70319"
-         xml:space="preserve"> </text>
-      <path
-         id="path8483"
-         d="m 159.55545,140.80384 0,15.93016 26.69102,0 0,-15.93016 -26.69102,0 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text8485"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="152.77957"
-         x="166.65244"
-         xml:space="preserve">E</text>
-      <text
-         id="text8487"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="154.72867"
-         x="174.90256"
-         xml:space="preserve">2</text>
-      <text
-         id="text8489"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="152.77957"
-         x="179.10262"
-         xml:space="preserve"> </text>
-      <path
-         id="path8491"
-         d="m 39.431826,32.788011 0,15.864562 26.625388,0 0,-15.864562 -26.625388,0 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text8493"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.529472"
-         x="46.500679"
-         xml:space="preserve">E</text>
-      <text
-         id="text8495"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="46.478577"
-         x="54.750797"
-         xml:space="preserve">1</text>
-      <text
-         id="text8497"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.529472"
-         x="58.950863"
-         xml:space="preserve"> </text>
-      <path
-         id="path8499"
-         d="M 153.30224,120.70373 19.865915,36.957963"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8501"
-         d="m 159.0117,123.5899 c 1.04064,-1.64924 0.54375,-3.82323 -1.10627,-4.86338 -1.65002,-1.03077 -3.83443,-0.53413 -4.87507,1.11511 -1.03127,1.64924 -0.53438,3.83261 1.11564,4.86338 1.65002,1.04015 3.83443,0.5435 4.8657,-1.11511"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8503"
-         d="m 160.71736,119.32574 c 1.04064,-1.64924 0.54375,-3.82323 -1.10627,-4.86338 -1.65002,-1.03077 -3.83443,-0.53413 -4.87507,1.11511 -1.03127,1.64924 -0.53438,3.83261 1.11564,4.86338 1.65002,1.04015 3.83443,0.5435 4.8657,-1.11511"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8505"
-         d="m 22.200324,38.194893 c 1.04064,-1.649239 0.543758,-3.832608 -1.115641,-4.863383 -1.650024,-1.040145 -3.825056,-0.543499 -4.865696,1.115111 -1.031265,1.64924 -0.534383,3.823238 1.115641,4.863383 1.650024,1.030775 3.834431,0.534129 4.865696,-1.115111"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8507"
-         d="m 22.200324,38.194893 c 1.04064,-1.649239 0.543758,-3.832608 -1.115641,-4.863383 -1.650024,-1.040145 -3.825056,-0.543499 -4.865696,1.115111 -1.031265,1.64924 -0.534383,3.823238 1.115641,4.863383 1.650024,1.030775 3.834431,0.534129 4.865696,-1.115111"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8509"
-         d="M 198.14946,149.63913 61.644959,70.993542"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8511"
-         d="m 202.32483,155.07539 c 1.04064,-1.64924 0.54376,-3.82324 -1.10627,-4.86338 -1.65002,-1.03078 -3.83443,-0.53413 -4.87507,1.11511 -1.03126,1.64924 -0.53438,3.83261 1.11564,4.86338 1.65003,1.04015 3.83443,0.5435 4.8657,-1.11511"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8513"
-         d="m 204.88333,153.93828 c 1.04064,-1.64924 0.54376,-3.82324 -1.10627,-4.86338 -1.65002,-1.03078 -3.83443,-0.53413 -4.87507,1.11511 -1.03126,1.64924 -0.53438,3.83261 1.11564,4.86338 1.65003,1.04015 3.83443,0.5435 4.8657,-1.11511"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8515"
-         d="m 65.513457,69.680379 c 1.04064,-1.649239 0.543757,-3.832608 -1.115642,-4.863383 -1.650024,-1.040145 -3.825056,-0.543499 -4.865696,1.115111 -1.031265,1.64924 -0.534383,3.823238 1.115641,4.863383 1.650025,1.030775 3.834431,0.534129 4.865697,-1.115111"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path8517"
-         d="m 62.670681,70.533212 c 1.04064,-1.649239 0.543757,-3.832608 -1.115642,-4.863383 -1.650024,-1.040145 -3.825056,-0.543499 -4.865696,1.115111 -1.031265,1.64924 -0.534383,3.823238 1.115641,4.863383 1.650025,1.030775 3.834431,0.534129 4.865697,-1.115111"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-    </g>
-    <path
-       style="fill:none;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="M -63.096689,357.24106 69.31399,433.6884"
-       id="path8549"
-       inkscape:connector-curvature="0" />
-  </g>
-</svg>

dox/user_guides/boolean_operations/images/boolean_image015.svg

@@ -1,250 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="204.66461"
-   height="131.16034"
-   id="svg9059"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="New document 36">
-  <defs
-     id="defs9061">
-    <clipPath
-       id="clipEmfPath1"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect9072"
-         height="162.56694"
-         width="566.85828"
-         y="0"
-         x="0" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath2"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect9075"
-         height="15.746798"
-         width="26.70039"
-         y="74.08493"
-         x="98.85144" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath3"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect9078"
-         height="15.746798"
-         width="26.70039"
-         y="140.97133"
-         x="159.30232" />
-    </clipPath>
-    <clipPath
-       id="clipEmfPath4"
-       clipPathUnits="userSpaceOnUse">
-      <rect
-         id="rect9081"
-         height="15.896767"
-         width="26.550388"
-         y="32.843323"
-         x="39.300575" />
-    </clipPath>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="3.1865399"
-     inkscape:cx="91.411912"
-     inkscape:cy="65.588382"
-     inkscape:document-units="px"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:window-width="861"
-     inkscape:window-height="606"
-     inkscape:window-x="110"
-     inkscape:window-y="110"
-     inkscape:window-maximized="0" />
-  <metadata
-     id="metadata9064">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(56.60986,-329.64737)">
-    <g
-       id="g9083"
-       transform="translate(-70.64843,298.24077)">
-      <text
-         id="text9085"
-         style="font-size:12.45018196px;font-style:normal;font-weight:normal;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="162.56694"
-         x="218.70319"
-         xml:space="preserve"> </text>
-      <path
-         id="path9087"
-         d="m 98.870194,73.972457 0,15.878021 26.625386,0 0,-15.878021 -26.625386,0 z"
-         clip-path="url(#clipEmfPath1)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text9089"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="85.932526"
-         x="103.95152"
-         xml:space="preserve">E</text>
-      <text
-         id="text9091"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="87.882126"
-         x="112.20164"
-         xml:space="preserve">12</text>
-      <text
-         id="text9093"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="85.932526"
-         x="120.45176"
-         xml:space="preserve"> </text>
-      <path
-         id="path9095"
-         d="m 159.30233,140.84011 0,15.93426 26.69101,0 0,-15.93426 -26.69101,0 z"
-         clip-path="url(#clipEmfPath2)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text9097"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="152.81892"
-         x="164.4024"
-         xml:space="preserve">E</text>
-      <text
-         id="text9099"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="154.76852"
-         x="172.65253"
-         xml:space="preserve">22</text>
-      <text
-         id="text9101"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="152.81892"
-         x="180.90263"
-         xml:space="preserve"> </text>
-      <path
-         id="path9103"
-         d="m 39.178697,32.796455 0,15.868648 26.625389,0 0,-15.868648 -26.625389,0 z"
-         clip-path="url(#clipEmfPath3)"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <text
-         id="text9105"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.540943"
-         x="44.400646"
-         xml:space="preserve">E</text>
-      <text
-         id="text9107"
-         style="font-size:8.10011864px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="46.490547"
-         x="52.650768"
-         xml:space="preserve">11</text>
-      <text
-         id="text9109"
-         style="font-size:12.45018196px;font-style:normal;font-weight:bold;text-align:start;text-anchor:start;fill:#000000;font-family:Times New Roman"
-         y="44.540943"
-         x="60.90089"
-         xml:space="preserve"> </text>
-      <path
-         id="path9111"
-         d="M 196.93413,148.29172 63.488427,64.524378"
-         clip-path="url(#clipEmfPath4)"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9113"
-         d="m 202.64358,151.17863 c 1.03127,-1.64966 0.53439,-3.82422 -1.11564,-4.86463 -1.65002,-1.03104 -3.83443,-0.53427 -4.86569,1.11539 -1.04064,1.64967 -0.54376,3.8336 1.11564,4.86464 1.65002,1.04041 3.82505,0.54364 4.86569,-1.1154"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9115"
-         d="m 202.64358,151.17863 c 1.03127,-1.64966 0.53439,-3.82422 -1.11564,-4.86463 -1.65002,-1.03104 -3.83443,-0.53427 -4.86569,1.11539 -1.04064,1.64967 -0.54376,3.8336 1.11564,4.86464 1.65002,1.04041 3.82505,0.54364 4.86569,-1.1154"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9117"
-         d="m 65.822836,65.761627 c 1.04064,-1.649665 0.543758,-3.833596 -1.106266,-4.864636 -1.650024,-1.040413 -3.834431,-0.543639 -4.875071,1.115398 -1.031265,1.649665 -0.534383,3.824222 1.115641,4.864636 1.650024,1.03104 3.834431,0.534266 4.865696,-1.115398"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9119"
-         d="m 65.822836,65.761627 c 1.04064,-1.649665 0.543758,-3.833596 -1.106266,-4.864636 -1.650024,-1.040413 -3.834431,-0.543639 -4.875071,1.115398 -1.031265,1.649665 -0.534383,3.824222 1.115641,4.864636 1.650024,1.03104 3.834431,0.534266 4.865696,-1.115398"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9121"
-         d="M 153.05848,120.73482 19.612786,36.967482"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9123"
-         d="m 158.76794,123.62174 c 1.03127,-1.64967 0.53439,-3.82423 -1.11564,-4.86464 -1.65002,-1.03104 -3.83443,-0.53427 -4.86569,1.1154 -1.04064,1.64966 -0.54376,3.83359 1.11564,4.86463 1.65002,1.04042 3.82505,0.54364 4.86569,-1.11539"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9125"
-         d="m 158.76794,123.62174 c 1.03127,-1.64967 0.53439,-3.82423 -1.11564,-4.86464 -1.65002,-1.03104 -3.83443,-0.53427 -4.86569,1.1154 -1.04064,1.64966 -0.54376,3.83359 1.11564,4.86463 1.65002,1.04042 3.82505,0.54364 4.86569,-1.11539"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9127"
-         d="m 21.947195,38.204731 c 1.040641,-1.649665 0.543758,-3.833596 -1.106266,-4.864636 -1.650024,-1.040413 -3.834431,-0.54364 -4.875071,1.115398 -1.031265,1.649665 -0.534383,3.824222 1.115641,4.864636 1.650024,1.03104 3.834431,0.534266 4.865696,-1.115398"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9129"
-         d="m 21.947195,38.204731 c 1.040641,-1.649665 0.543758,-3.833596 -1.106266,-4.864636 -1.650024,-1.040413 -3.834431,-0.54364 -4.875071,1.115398 -1.031265,1.649665 -0.534383,3.824222 1.115641,4.864636 1.650024,1.03104 3.834431,0.534266 4.865696,-1.115398"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9131"
-         d="m 59.307116,63.9245 c 0,1.96835 1.584398,3.561776 3.534427,3.552403 1.950028,0 3.534426,-1.602799 3.525051,-3.571149 0,-1.96835 -1.584398,-3.552402 -3.534427,-3.552402 -1.959403,0.0094 -3.534426,1.602799 -3.525051,3.571148"
-         style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none"
-         inkscape:connector-curvature="0" />
-      <path
-         id="path9133"
-         d="m 59.307116,63.9245 c 0,1.96835 1.584398,3.561776 3.534427,3.552403 1.950028,0 3.534426,-1.602799 3.525051,-3.571149 0,-1.96835 -1.584398,-3.552402 -3.534427,-3.552402 -1.959403,0.0094 -3.534426,1.602799 -3.525051,3.571148"
-         style="fill:none;stroke:#000000;stroke-width:2.81254101px;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;stroke-dasharray:none"
-         inkscape:connector-curvature="0" />
-    </g>
-    <path
-       style="fill:none;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-miterlimit:4;stroke-dasharray:none"
-       d="m 144.67103,92.560478 37.97222,22.908862"
-       id="path9173"
-       inkscape:connector-curvature="0"
-       transform="translate(-56.60986,329.64737)" />
-  </g>
-</svg>