0029548: BRepFill_Pipe algorithm produces result with self-interferences

The region of self-interference is restricted.

CMakeLists.txt

@@ -32,6 +32,7 @@ if ("${BUILD_LIBRARY_TYPE}" STREQUAL "Shared")
   endif()
 else()
   unset (BUILD_SHARED_LIBS)
+  message (STATUS "Info: Only 3rdparty's header files are used for building of static OCCT libraries")
   unset (BUILD_SHARED_LIBRARY_NAME_POSTFIX)
 endif()
 
@@ -343,9 +344,8 @@ set (BUILD_ADDITIONAL_TOOLKITS "" CACHE STRING "${BUILD_ADDITIONAL_TOOLKITS_DESC
 separate_arguments (BUILD_ADDITIONAL_TOOLKITS)
 
 if (MSVC)
-  set (BUILD_SAMPLES_MFC OFF CACHE BOOL "${BUILD_SAMPLES_MFC_DESCR}")
+  set (BUILD_MODULE_MfcSamples OFF CACHE BOOL "${BUILD_MODULE_MfcSamples_DESCR}")
 endif()
-set (BUILD_SAMPLES_QT OFF CACHE BOOL "${BUILD_SAMPLES_QT_DESCR}")
 
 set (BUILD_Inspector OFF CACHE BOOL "${BUILD_Inspector_DESCR}")
 
@@ -381,7 +381,7 @@ endif()
 # include the patched or original list of modules
 # list <MODULENAME>_TOOLKITS is created foreach module and contains its toolkits
 # list <OCCT_MODULES> will contain all modules
-OCCT_MODULES_AND_TOOLKITS (MODULES "TOOLKITS" OCCT_MODULES)
+OCCT_MODULES_AND_TOOLKITS (OCCT_MODULES)
 
 foreach (OCCT_MODULE ${OCCT_MODULES})
   BUILD_MODULE (${OCCT_MODULE})
@@ -481,6 +481,7 @@ OCCT_IS_PRODUCT_REQUIRED (CSF_FreeImagePlus CAN_USE_FREEIMAGE)
 OCCT_IS_PRODUCT_REQUIRED (CSF_TclLibs USE_TCL)
 OCCT_IS_PRODUCT_REQUIRED (CSF_FREETYPE USE_FREETYPE)
 OCCT_IS_PRODUCT_REQUIRED (CSF_OpenGlLibs CAN_USE_GLES2)
+OCCT_IS_PRODUCT_REQUIRED (CSF_GL2PS CAN_USE_GL2PS)
 OCCT_IS_PRODUCT_REQUIRED (CSF_TBB CAN_USE_TBB)
 OCCT_IS_PRODUCT_REQUIRED (CSF_EIGEN CAN_USE_EIGEN)
 
@@ -608,6 +609,24 @@ else()
   OCCT_CHECK_AND_UNSET ("INSTALL_GLES2")
 endif()
 
+# GL2PS
+if (NOT DEFINED ANDROID AND CAN_USE_GL2PS)
+  set (USE_GL2PS OFF CACHE BOOL "${USE_GL2PS_DESCR}")
+
+  if (USE_GL2PS)
+    add_definitions (-DHAVE_GL2PS)
+    OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/gl2ps")
+  else()
+    OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_GL2PS")
+    OCCT_CHECK_AND_UNSET ("INSTALL_GL2PS")
+  endif()
+else()
+  OCCT_CHECK_AND_UNSET ("USE_GL2PS")
+
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_GL2PS")
+  OCCT_CHECK_AND_UNSET ("INSTALL_GL2PS")
+endif()
+
 # TBB
 if (NOT DEFINED ANDROID AND CAN_USE_TBB)
   set (USE_TBB OFF CACHE BOOL "${USE_TBB_DESCR}")
@@ -683,10 +702,11 @@ else()
   OCCT_CHECK_AND_UNSET ("3RDPARTY_FLEX_EXECUTABLE")
 endif()
 
-# check all 3rdparty include paths
 string (REGEX REPLACE ";" " " 3RDPARTY_NOT_INCLUDED "${3RDPARTY_NOT_INCLUDED}")
+
+# check all 3rdparty paths
 if (3RDPARTY_NOT_INCLUDED)
-  message (FATAL_ERROR "Could not find headers of used third-party products: ${3RDPARTY_NOT_INCLUDED}" )
+  message (FATAL_ERROR "NOT FOUND: ${3RDPARTY_NOT_INCLUDED}" )
 endif()
 
 if (3RDPARTY_INCLUDE_DIRS)
@@ -699,28 +719,13 @@ endif()
 # include <cmake binary folder>/inc
 include_directories (${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE})
 
-# check all 3rdparty library paths
-string (REGEX REPLACE ";" " " 3RDPARTY_NO_LIBS "${3RDPARTY_NO_LIBS}")
-if (3RDPARTY_NO_LIBS)
-  if (BUILD_SHARED_LIBS)
-    message (SEND_ERROR "Could not find libraries of used third-party products: ${3RDPARTY_NO_LIBS}" )
-  else()
-    message (WARNING "Could not find libraries of used third-party products: ${3RDPARTY_NO_LIBS}" )
-  endif()
-endif()
-if (3RDPARTY_LIBRARY_DIRS)
+if (3RDPARTY_LIBRARY_DIRS AND BUILD_SHARED_LIBS)
   list (REMOVE_DUPLICATES 3RDPARTY_LIBRARY_DIRS)
   string (REGEX REPLACE ";" "\n\t" 3RDPARTY_LIBRARY_DIRS_WITH_ENDS "${3RDPARTY_LIBRARY_DIRS}")
   message (STATUS "Info: The directories of 3rdparty libraries: \n\t${3RDPARTY_LIBRARY_DIRS_WITH_ENDS}")
   link_directories (${3RDPARTY_LIBRARY_DIRS})
 endif()
 
-# report not found 3rdparty dll paths
-string (REGEX REPLACE ";" " " 3RDPARTY_NO_DLLS "${3RDPARTY_NO_DLLS}")
-if (3RDPARTY_NO_DLLS)
-  message (WARNING "Could not find DLLs of used third-party products: ${3RDPARTY_NO_DLLS}" )
-endif()
-
 # build directories
 if (SINGLE_GENERATOR)
   set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib${BIN_LETTER}")
@@ -770,33 +775,30 @@ else()
   set (SCRIPT_EXT sh)
 endif()
 
-if (BUILD_Inspector OR BUILD_SAMPLES_QT)
-  # check qt 3rdparty path
-  add_definitions (-DHAVE_QT)
-  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt")
-  message (STATUS "Info: Qt is used by OCCT")
-else()
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_QT")
-  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_TQTMALLOC")
-  OCCT_CHECK_AND_UNSET ("INSTALL_QT")
-endif()
-
 # OCCT tools
 # include the patched or original list of tools
 # list <TOOLNAME>_TOOLKITS is created foreach tool and contains its toolkits
 # list <OCCT_TOOLS> will contain all tools
-if (BUILD_Inspector)
-  add_definitions (-DHAVE_Inspector)
-
-  OCCT_MODULES_AND_TOOLKITS (TOOLS "TOOL_TOOLKITS" OCCT_TOOLS)
+if (NOT BUILD_Inspector)
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_QT")
+  OCCT_CHECK_AND_UNSET_GROUP ("3RDPARTY_TQTMALLOC")
+  OCCT_CHECK_AND_UNSET ("INSTALL_QT")
+else()
+  OCCT_TOOLS_AND_TOOLKITS (OCCT_TOOLS)
   foreach (OCCT_TOOL ${OCCT_TOOLS})
     list (APPEND BUILD_TOOL_TOOLKITS ${${OCCT_TOOL}_TOOL_TOOLKITS})
   endforeach()
 
-  # collect all the headers to <binary dir>/inc/inspector folder
+  # collect all the headers to <binary dir>/inc folder
   string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-  message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/inc/inspector ...")
+  message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT tool header files into ${CMAKE_BINARY_DIR}/tools/inc ...")
   COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOL_TOOLKITS}" "${CMAKE_SOURCE_DIR}/tools" "${INSTALL_DIR_INCLUDE}/inspector")
+
+
+  # check qt 3rdparty path
+  add_definitions (-DHAVE_QT)
+  OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/qt")
+  message (STATUS "Info: Qt is used by OCCT")
 endif()
 
 # OCCT samples
@@ -894,9 +896,9 @@ OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${S
 # write current custom.bat/sh (for build directory)
 OCCT_CONFIGURE ("adm/templates/custom.build.${SCRIPT_EXT}.in" "${SUB_CUSTOM_NAME}")
 
-if (BUILD_SAMPLES_MFC OR BUILD_SAMPLES_QT)
-  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
-  OCCT_COPY_FILE_OR_DIR    ("adm/templates/sample.${SCRIPT_EXT}" "${CMAKE_BINARY_DIR}")
+if (BUILD_MODULE_MfcSamples)
+  OCCT_INSTALL_FILE_OR_DIR ("adm/templates/sample.bat" "${INSTALL_DIR_SCRIPT}")
+  OCCT_COPY_FILE_OR_DIR    ("adm/templates/sample.bat" "${CMAKE_BINARY_DIR}")
 endif()
 
 # env script for draw in building environment
@@ -922,15 +924,6 @@ foreach(RESOURCE ${RESOURCES})
   endif()
 endforeach()
 
-if (BUILD_SAMPLES_QT)
-  FILE_TO_LIST ("adm/SAMPLES_RESOURCES" SAMPLES_RESOURCES)
-  foreach(RESOURCE ${SAMPLES_RESOURCES})
-    OCCT_INSTALL_FILE_OR_DIR ("samples/${RESOURCE}" "${INSTALL_DIR_RESOURCE}/samples")
-    #message("Copy Sample resources: samples/${RESOURCE} into ${INSTALL_DIR_RESOURCE}/samples")
-  endforeach()
-endif()
-
-
 # patch installed DrawDefault file if BUILD_SHARED_LIBRARY_NAME_POSTFIX is changed
 if (NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
   OCCT_UPDATE_DRAW_DEFAULT_FILE()
@@ -975,11 +968,9 @@ endif()
 
 message (STATUS "Info: \(${CURRENT_TIME}\) OCCT toolkits processed")
 # samples do not support patch usage
-if (BUILD_SAMPLES_MFC OR BUILD_SAMPLES_QT)
+if (BUILD_MODULE_MfcSamples)
   set (OCCT_ROOT ${CMAKE_SOURCE_DIR})
-endif()
 
-if (BUILD_SAMPLES_MFC)
   set (MFC_STANDARD_SAMPLES_DIR ${OCCT_ROOT}/samples/mfc/standard)
   set (COMMON_WINMAIN_FILE      ${MFC_STANDARD_SAMPLES_DIR}/Common/Winmain.cpp)
 
@@ -998,33 +989,6 @@ if (BUILD_SAMPLES_MFC)
   message (STATUS "Info: \(${CURRENT_TIME}\) MFC Sample projects added")
 endif()
 
-OCCT_MODULES_AND_TOOLKITS (SAMPLES "SAMPLES_TOOLKITS" OCCT_SAMPLES)
-
-if (BUILD_Inspector OR BUILD_SAMPLES_QT)
-  if (BUILD_SAMPLES_QT)
-    if (NOT Qt5_FOUND OR "${Qt5Gui_EGL_INCLUDE_DIRS}" STREQUAL "" OR NOT WIN32)
-      list (REMOVE_ITEM qt_SAMPLES_TOOLKITS AndroidQt)
-      message (STATUS "Info: AndroidQt sample excluded due to OS is not Windows or Qt is configured without ANGLE")
-    endif()
-  else()
-    list (REMOVE_ITEM OCCT_SAMPLES qt)
-    message (STATUS "Info: qt samples excluded due to BUILD_SAMPLES_QT is disabled")
-  endif()
-
-  foreach (OCCT_SAMPLE ${OCCT_SAMPLES})
-    list (APPEND BUILD_SAMPLE_TOOLKITS ${${OCCT_SAMPLE}_SAMPLES_TOOLKITS})
-
-    # collect all the headers to <binary dir>/inc/samples folder
-    string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
-    message (STATUS "Info: \(${CURRENT_TIME}\) ${OCCT_SAMPLE} Sample projects added")
-
-    # include patched toolkit projects or original ones
-    foreach (BUILD_SAMPLE_TOOLKIT ${${OCCT_SAMPLE}_SAMPLES_TOOLKITS})
-      OCCT_ADD_SUBDIRECTORY ("samples/${OCCT_SAMPLE}/${BUILD_SAMPLE_TOOLKIT}")
-    endforeach()
-  endforeach()
-endif()
-
 if (BUILD_MODULE_UwpSample)
   add_subdirectory(samples/xaml)
 endif()
@@ -1039,9 +1003,13 @@ if (BUILD_TOOL_TOOLKITS)
             PERMISSIONS OWNER_READ OWNER_WRITE OWNER_EXECUTE GROUP_READ GROUP_WRITE GROUP_EXECUTE WORLD_READ WORLD_WRITE WORLD_EXECUTE)
   endif()
 
-  set (OpenCASCADE_BINARY_DIR "${INSTALL_DIR}/${INSTALL_DIR_BIN}")
+  set (BUILD_SAMPLE_TOOLKITS TInspectorEXE)
+  foreach (BUILD_SAMPLE_TOOL_TOOLKIT ${BUILD_SAMPLE_TOOLKITS})
+    OCCT_ADD_SUBDIRECTORY ("samples/tools/${BUILD_SAMPLE_TOOL_TOOLKIT}")
+  endforeach()
+
   # patch TInspectorEXE
-  OCCT_CONFIGURE ("adm/templates/TInspectorEXE.vcxproj.user.in" "${CMAKE_BINARY_DIR}/tools/TInspectorEXE/TInspectorEXE.vcxproj.user")
+  OCCT_CONFIGURE ("adm/templates/TInspectorEXE.vcxproj.user.in" "${CMAKE_BINARY_DIR}/samples/tools/TInspectorEXE/TInspectorEXE.vcxproj.user")
 endif()
 
 # Prepare variables for configuration of OpenCASCADE cmake config file
@@ -1127,6 +1095,10 @@ if (APPLE)
   set (SET_OpenCASCADE_WITH_GLX "set (OpenCASCADE_WITH_GLX       ${USE_GLX})")
 endif()
 
+if (NOT SINGLE_GENERATOR)
+  OCCT_INSERT_CODE_FOR_TARGET()
+endif()
+
 # Configure and install cmake config file
 configure_file("${CMAKE_SOURCE_DIR}/adm/templates/OpenCASCADEConfig.cmake.in" "OpenCASCADEConfig.cmake" @ONLY)
 install(FILES "${CMAKE_BINARY_DIR}/OpenCASCADEConfig.cmake" DESTINATION  "${INSTALL_DIR_CMAKE}")

adm/CMPLRS

@@ -1,17 +1,17 @@
 wnt WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)
 lin WOKSteps_exec_link DRAWEXE #WOKStep_EXELink(exec.tks)
 
-wnt cmplrs_cxx f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_cxx b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_cxx f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_cxx b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
 wnt cmplrs_cxx Aspect (wnt cmplrs_cxx b) -D_AFXDLL
 wnt cmplrs_cxx (wnt cmplrs_cxx b) -D_AFXDLL -D_AFXDLL
 
-wnt cmplrs_c f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-wnt cmplrs_c b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_c f -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+wnt cmplrs_c b -D_CRT_SECURE_NO_DEPRECATE -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
 wnt cmplrs_c NIS (wnt cmplrs_c b) -DSILGL -DSILGL_VRS=50
 
-lin cmplrs_cxx f -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
-lin cmplrs_cxx b -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_TBB -DHAVE_OPENCL
+lin cmplrs_cxx f -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
+lin cmplrs_cxx b -DOCC_CONVERT_SIGNALS -D_GNU_SOURCE=1 -DHAVE_FREEIMAGE -DHAVE_GL2PS -DHAVE_TBB -DHAVE_OPENCL
 
 lin cmplrs_c f -D_GNU_SOURCE=1 -fexceptions
 lin cmplrs_c b -D_GNU_SOURCE=1 -fexceptions

adm/SAMPLES

@@ -1 +0,0 @@
-qt AndroidQt FuncDemo IESample Tutorial

adm/SAMPLES_RESOURCES

@@ -1,2 +0,0 @@
-qt/Common/res/
-qt/Tutorial/res/

adm/TOOLS

@@ -1,4 +1,4 @@
 TModelingData TKShapeView
 TVisualization TKView TKVInspector
 TApplicationFramework TKTreeModel TKTInspectorAPI TKDFBrowser
-TTool TKTInspector TKToolsDraw TInspectorEXE
+TTool TKTInspector TKToolsDraw

adm/UDLIST

@@ -433,5 +433,4 @@ n IVtkDraw
 t TKIVtkDraw
 n Geom2dEvaluator
 t TKVCAF
-n XCAFView
-n XCAFNoteObjects
+n XCAFView

adm/cmake/3rdparty_macro.cmake

@@ -117,7 +117,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
 
   foreach (LIBRARY_NAME ${${LIBRARY_CSF_NAME}})
     string (REPLACE "." "" LIBRARY_NAME_SUFFIX "${LIBRARY_NAME}")
-#    if (BUILD_SHARED_LIBS)
+    if (BUILD_SHARED_LIBS)
       # library
       if (NOT 3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} OR NOT EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}}")
         set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
@@ -167,7 +167,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
       if (3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX} AND EXISTS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX}}")
         list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX}}")
       else()
-        list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX})
+        list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_LIBRARY_DIR_${LIBRARY_NAME_SUFFIX})
 
         set (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} "" CACHE FILEPATH "The path to ${PRODUCT_NAME} library \"${LIBRARY_NAME}\"" FORCE)
       endif()
@@ -213,7 +213,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
         if (3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX} OR EXISTS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX}}")
           list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX}}")
         else()
-          list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX})
+          list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${PRODUCT_NAME}_DLL_DIR_${LIBRARY_NAME_SUFFIX})
         endif()
       endif()
 
@@ -277,6 +277,26 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
             endif()
           endif()
 
+          if("${PRODUCT_NAME}" STREQUAL "GL2PS")
+            get_filename_component(GL2PSLIB ${3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX}} NAME)
+
+            if (SINGLE_GENERATOR)
+              install (FILES "${ABS_PATH}" DESTINATION "${INSTALL_DIR_LIB}" RENAME ${GL2PSLIB}.1)
+            else()
+              install (FILES "${ABS_PATH}"
+                       CONFIGURATIONS Release
+                       DESTINATION "${INSTALL_DIR_LIB}"
+                       RENAME ${GL2PSLIB}.1)
+              install (FILES "${ABS_PATH}"
+                       CONFIGURATIONS RelWithDebInfo
+                       DESTINATION "${INSTALL_DIR_LIB}i"
+                       RENAME ${GL2PSLIB}.1)
+              install (FILES "${ABS_PATH}"
+                       CONFIGURATIONS Debug
+                       DESTINATION "${INSTALL_DIR_LIB}d"
+                       RENAME ${GL2PSLIB}.1)
+            endif()
+          endif()
         endif()
       else()
         # the library directory for using by the executable
@@ -291,7 +311,7 @@ macro (THIRDPARTY_PRODUCT PRODUCT_NAME HEADER_NAME LIBRARY_CSF_NAME LIBRARY_NAME
       endif()
 
       mark_as_advanced (3RDPARTY_${PRODUCT_NAME}_LIBRARY_${LIBRARY_NAME_SUFFIX} 3RDPARTY_${PRODUCT_NAME}_DLL_${LIBRARY_NAME_SUFFIX})
-#    endif()
+    endif()
   endforeach()
 endmacro()
 

adm/cmake/ffmpeg.cmake

@@ -140,7 +140,7 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})
   if (3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME} AND EXISTS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME}}")
   else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_LIBRARY_DIR_${LIBRARY_NAME})
 
     set (3RDPARTY_FFMPEG_LIBRARY_${LIBRARY_NAME} "" CACHE FILEPATH "The path to FFmpeg library (${LIBRARY_NAME})" FORCE)
   endif()
@@ -167,7 +167,7 @@ foreach (LIBRARY_NAME ${CSF_FFmpeg})
     if (3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME} OR EXISTS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME}}")
     else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FFMPEG_DLL_DIR_${LIBRARY_NAME})
     endif()
   endif()
 

adm/cmake/freetype.cmake

@@ -218,7 +218,7 @@ else()
 endif()
 
 # freetype library
-#if (BUILD_SHARED_LIBS)
+if (BUILD_SHARED_LIBS)
   if (NOT 3RDPARTY_FREETYPE_LIBRARY OR NOT EXISTS "${3RDPARTY_FREETYPE_LIBRARY}")
     set (CMAKE_FIND_LIBRARY_SUFFIXES .lib .so .dylib .a)
 
@@ -253,7 +253,7 @@ endif()
   if (3RDPARTY_FREETYPE_LIBRARY_DIR AND EXISTS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_FREETYPE_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_FREETYPE_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_LIBRARY_DIR)
 
     set (3RDPARTY_FREETYPE_LIBRARY "" CACHE FILEPATH "The path to freetype library" FORCE)
   endif()
@@ -290,7 +290,7 @@ endif()
     if (3RDPARTY_FREETYPE_DLL_DIR OR EXISTS "${3RDPARTY_FREETYPE_DLL_DIR}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_FREETYPE_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_FREETYPE_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_FREETYPE_DLL_DIR)
     endif()
   endif()
 
@@ -345,7 +345,7 @@ endif()
       set (USED_3RDPARTY_FREETYPE_DIR ${3RDPARTY_FREETYPE_LIBRARY_DIR})
     endif()
   endif()
-#endif()
+endif()
 
 # unset all redundant variables
 OCCT_CHECK_AND_UNSET(FREETYPE_INCLUDE_DIR_ft2build)

adm/cmake/gl2ps.cmake

@@ -0,0 +1,3 @@
+#GL2PS
+
+THIRDPARTY_PRODUCT("GL2PS" "gl2ps.h" "CSF_GL2PS" "d")

adm/cmake/occt_csf.cmake

@@ -58,6 +58,15 @@ if (USE_TCL)
   endif()
 endif()
 
+# GL2PS
+if (NOT DEFINED ANDROID)
+  if (USE_GL2PS)
+    set (CSF_GL2PS "gl2ps")
+  else()
+    set (CSF_GL2PS)
+  endif()
+endif()
+
 if (WIN32)
   set (CSF_advapi32      "advapi32.lib")
   set (CSF_gdi32         "gdi32.lib")

adm/cmake/occt_defs_flags.cmake

@@ -16,9 +16,10 @@ if (MSVC)
   set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   /fp:precise")
 endif()
 
-# add SSE2 option for old MSVC compilers (VS 2005 - 2010, 32 bit only)
+# set compiler short name and choose SSE2 option for appropriate MSVC compilers
+# ONLY for 32-bit
 if (NOT CMAKE_SIZEOF_VOID_P EQUAL 8)
-  if (MSVC AND ((MSVC_VERSION EQUAL 1400) OR (MSVC_VERSION EQUAL 1500) OR (MSVC_VERSION EQUAL 1600)))
+  if (MSVC80 OR MSVC90 OR MSVC10)
     set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:SSE2")
     set (CMAKE_C_FLAGS   "${CMAKE_C_FLAGS}   /arch:SSE2")
   endif()
@@ -81,7 +82,7 @@ if (IS_DEBUG_C)
   string (REGEX REPLACE "-DDEBUG" "" CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG}")
 endif()
 # enable parallel compilation on MSVC 9 and above
-if (MSVC AND (MSVC_VERSION GREATER 1400))
+if (MSVC AND NOT MSVC70 AND NOT MSVC80)
   set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /MP")
 endif()
 

adm/cmake/occt_macros.cmake

@@ -60,27 +60,25 @@ endmacro()
 # COMPILER variable
 macro (OCCT_MAKE_COMPILER_SHORT_NAME)
   if (MSVC)
-    if ((MSVC_VERSION EQUAL 1300) OR (MSVC_VERSION EQUAL 1310))
+    if (MSVC70)
       set (COMPILER vc7)
-    elseif (MSVC_VERSION EQUAL 1400)
+    elseif (MSVC80)
       set (COMPILER vc8)
-    elseif (MSVC_VERSION EQUAL 1500)
+    elseif (MSVC90)
       set (COMPILER vc9)
-    elseif (MSVC_VERSION EQUAL 1600)
+    elseif (MSVC10)
       set (COMPILER vc10)
-    elseif (MSVC_VERSION EQUAL 1700)
+    elseif (MSVC11)
       set (COMPILER vc11)
-    elseif (MSVC_VERSION EQUAL 1800)
+    elseif (MSVC12)
       set (COMPILER vc12)
-    elseif (MSVC_VERSION EQUAL 1900)
+    elseif (MSVC14)
       set (COMPILER vc14)
-    elseif ((MSVC_VERSION GREATER 1900) AND (MSVC_VERSION LESS 2000))
+    elseif (MSVC15)
       # Since Visual Studio 15 (2017), its version diverged from version of
       # compiler which is 14.1; as that compiler uses the same run-time as 14.0,
       # we keep its id as "vc14" to be compatibille
       set (COMPILER vc14)
-    else()
-      message (FATAL_ERROR "Unrecognized MSVC_VERSION")
     endif()
   elseif (DEFINED CMAKE_COMPILER_IS_GNUCC)
     set (COMPILER gcc)
@@ -502,11 +500,11 @@ function (OCCT_TOOLKIT_FULL_DEP TOOLKIT_NAME TOOLKIT_FULL_DEPS)
   set (${TOOLKIT_FULL_DEPS} ${LOCAL_TOOLKIT_FULL_DEPS} PARENT_SCOPE)
 endfunction()
 
-# Function to get list of modules/toolkits/samples from file adm/${FILE_NAME}.
+# Function to get list of modules and toolkits from file adm/MODULES.
 # Creates list <$MODULE_LIST> to store list of MODULES and
-# <NAME_OF_MODULE>_TOOLKITS foreach module to store its toolkits, where "TOOLKITS" is defined by TOOLKITS_NAME_SUFFIX.
-function (OCCT_MODULES_AND_TOOLKITS FILE_NAME TOOLKITS_NAME_SUFFIX MODULE_LIST)
-  FILE_TO_LIST ("adm/${FILE_NAME}" FILE_CONTENT)
+# <NAME_OF_MODULE>_TOOLKITS foreach module to store its toolkits.
+function (OCCT_MODULES_AND_TOOLKITS MODULE_LIST)
+  FILE_TO_LIST ("adm/MODULES" FILE_CONTENT)
 
   foreach (CONTENT_LINE ${FILE_CONTENT})
     string (REPLACE " " ";" CONTENT_LINE ${CONTENT_LINE})
@@ -514,12 +512,30 @@ function (OCCT_MODULES_AND_TOOLKITS FILE_NAME TOOLKITS_NAME_SUFFIX MODULE_LIST)
     list (REMOVE_AT CONTENT_LINE 0)
     list (APPEND ${MODULE_LIST} ${MODULE_NAME})
     # (!) REMOVE THE LINE BELOW (implicit variables)
-    set (${MODULE_NAME}_${TOOLKITS_NAME_SUFFIX} ${CONTENT_LINE} PARENT_SCOPE)
+    set (${MODULE_NAME}_TOOLKITS ${CONTENT_LINE} PARENT_SCOPE)
   endforeach()
 
   set (${MODULE_LIST} ${${MODULE_LIST}} PARENT_SCOPE)
 endfunction()
 
+# Function to get list of tools and toolkits from file adm/TOOLS.
+# Creates list <$TOOL_LIST> to store list of TOOLS and
+# <NAME_OF_TOOL>_TOOLKITS foreach tool to store its toolkits.
+function (OCCT_TOOLS_AND_TOOLKITS TOOL_LIST)
+  FILE_TO_LIST ("adm/TOOLS" FILE_CONTENT)
+
+  foreach (CONTENT_LINE ${FILE_CONTENT})
+    string (REPLACE " " ";" CONTENT_LINE ${CONTENT_LINE})
+    list (GET CONTENT_LINE 0 TOOL_NAME)
+    list (REMOVE_AT CONTENT_LINE 0)
+    list (APPEND ${TOOL_LIST} ${TOOL_NAME})
+    # (!) REMOVE THE LINE BELOW (implicit variables)
+    set (${TOOL_NAME}_TOOL_TOOLKITS ${CONTENT_LINE} PARENT_SCOPE)
+  endforeach()
+
+  set (${TOOL_LIST} ${${TOOL_LIST}} PARENT_SCOPE)
+endfunction()
+
 # Returns OCC version string from file Standard_Version.hxx (if available)
 function (OCC_VERSION OCC_VERSION_MAJOR OCC_VERSION_MINOR OCC_VERSION_MAINTENANCE OCC_VERSION_DEVELOPMENT OCC_VERSION_STRING_EXT)
 
@@ -585,7 +601,7 @@ endmacro()
 # prior to version 3.3 not supporting per-configuration install paths
 # for install target files (see https://cmake.org/Bug/view.php?id=14317)
 macro (OCCT_UPDATE_TARGET_FILE)
-  if (MSVC)
+  if (NOT SINGLE_GENERATOR)
     OCCT_INSERT_CODE_FOR_TARGET ()
   endif()
 

adm/cmake/occt_toolkit.cmake

@@ -1,69 +1,31 @@
 # script for each OCCT toolkit
 
-# filling some variables by default values(src) or using custom(tools, samples)
-set (RELATIVE_SOURCES_DIR "${RELATIVE_DIR}")
-if ("${RELATIVE_SOURCES_DIR}" STREQUAL "")
-  #if it is not defined, use default directory
-  set (RELATIVE_SOURCES_DIR "src")
-endif()
-
-set (OCC_MODULES_LIST "${MODULES_LIST}")
-if ("${OCC_MODULES_LIST}" STREQUAL "")
-  set (OCC_MODULES_LIST ${OCCT_MODULES})
-endif()
-
-set (OCC_TARGET_FOLDER "${TARGET_FOLDER}")
-if ("${OCC_TARGET_FOLDER}" STREQUAL "")
-  set (OCC_TARGET_FOLDER "Modules")
-endif()
-
-set (OCCT_TOOLKITS_NAME_SUFFIX "${TOOLKITS_NAME_SUFFIX}")
-if ("${OCCT_TOOLKITS_NAME_SUFFIX}" STREQUAL "")
-  set (OCCT_TOOLKITS_NAME_SUFFIX "TOOLKITS")
-endif()
-
 # parce PACKAGES file
-FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
-if ("${USED_PACKAGES}" STREQUAL "")
-  set (USED_PACKAGES ${PROJECT_NAME})
+if ("${PROJECT_NAME}" STREQUAL DRAWEXE)
+  set (USED_PACKAGES DRAWEXE)
+else()
+  FILE_TO_LIST ("src/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
 endif()
 
-if (USE_QT)
-  # Qt dependencies
-  OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt_macro)
-  FIND_QT_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
-  include_directories("${PROJECT_INCLUDES}")
-endif(USE_QT)
-
 set (PRECOMPILED_DEFS)
 
 if (NOT BUILD_SHARED_LIBS)
   list (APPEND PRECOMPILED_DEFS "-DOCCT_NO_PLUGINS")
   if (WIN32)
-    list (APPEND PRECOMPILED_DEFS "-DOCCT_STATIC_BUILD")
+    list (APPEND PRECOMPILED_DEFS "-DHAVE_NO_DLL")
   endif()
 endif()
 
 # Get all used packages from toolkit
-UNSET(RESOURCE_FILES)
 foreach (OCCT_PACKAGE ${USED_PACKAGES})
-
-  #remove part after "/" in the OCCT_PACKAGE variable if exists
-  string (FIND "${OCCT_PACKAGE}" "/" _index)
-  if (_index GREATER -1)
-    math (EXPR _index "${_index}")
-    string (SUBSTRING "${OCCT_PACKAGE}" 0 ${_index} OCCT_PACKAGE_NAME)
-  else()
-    set (OCCT_PACKAGE_NAME "${OCCT_PACKAGE}")
-  endif()
-
+  
   # TKService contains platform-dependent packages: Xw and WNT
   if ((WIN32 AND "${OCCT_PACKAGE}" STREQUAL "Xw") OR (NOT WIN32 AND "${OCCT_PACKAGE}" STREQUAL "WNT"))
     # do nothing
   else()
 
     if (WIN32)
-      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE_NAME}_DLL")
+      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
     endif()
 
     set (SOURCE_FILES)
@@ -73,11 +35,11 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
     if (${BUILD_YACCLEX})
 
       # flex files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
+      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
       list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
 
       # bison files
-      OCCT_ORIGIN_AND_PATCHED_FILES ("${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
+      OCCT_ORIGIN_AND_PATCHED_FILES ("src/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
       list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
 
       if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
@@ -99,8 +61,8 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
           if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
             set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
             set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
-            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
-            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
+            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
+            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
             ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
            
             list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
@@ -110,23 +72,23 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
     endif()
 
     # header files
-    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES")
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
 
-      file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+      file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
       if(APPLE)
-        file (STRINGS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
+        file (STRINGS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
       endif()
     else()
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
 
-      file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
       if(APPLE)
-        file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
+        file (STRINGS "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
       endif()
     endif()
     
@@ -137,36 +99,26 @@ foreach (OCCT_PACKAGE ${USED_PACKAGES})
     endif()
 
     foreach(HEADER_FILE ${HEADER_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        list (APPEND USED_INCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
       else()
-        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
-        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${HEADER_FILE}")
       endif()
     endforeach()
 
     foreach(SOURCE_FILE ${SOURCE_FILES})
-      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        list (APPEND USED_SRCFILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${BUILD_PATCH}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
       else()
-        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
-        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE_NAME}" FILES "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/src/${OCCT_PACKAGE}/${SOURCE_FILE}")
       endif()
     endforeach()
-
-    if (USE_QT)
-      FIND_AND_INSTALL_QT_RESOURCES (${OCCT_PACKAGE} RESOURCE_FILES)
-      #message("Qt Resource files are: ${QT_RESOURCE_FILES} in ${OCCT_PACKAGE}")
-    endif(USE_QT)
-
-    #message("Resource files are: ${RESOURCE_FILES} in ${OCCT_PACKAGE}")
-    foreach(RESOURCE_FILE ${RESOURCE_FILES})
-      SOURCE_GROUP ("Resource Files\\${OCCT_PACKAGE_NAME}" FILES "${RESOURCE_FILE}")
-    endforeach()
   endif()
 endforeach()
 string (REGEX REPLACE ";" " " PRECOMPILED_DEFS "${PRECOMPILED_DEFS}")
@@ -183,30 +135,24 @@ if (MSVC)
 endif()
 
 set (CURRENT_MODULE)
-foreach (OCCT_MODULE ${OCC_MODULES_LIST})
-  list (FIND ${OCCT_MODULE}_${OCCT_TOOLKITS_NAME_SUFFIX} ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
-
+foreach (OCCT_MODULE ${OCCT_MODULES})
+  list (FIND ${OCCT_MODULE}_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
   if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
     set (CURRENT_MODULE ${OCCT_MODULE})
   endif()
 endforeach()
 
-if (MSVC)
+if (NOT SINGLE_GENERATOR)
   OCCT_INSERT_CODE_FOR_TARGET ()
 endif()
 
-if (USE_QT)
-  FIND_AND_WRAP_MOC_FILES("${USED_INCFILES}" "${PROJECT_NAME}_MOC_FILES")
-  #message("MOC files: ${${PROJECT_NAME}_MOC_FILES}")
-endif (USE_QT)
-
-if (EXECUTABLE_PROJECT)
-  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RESOURCE_FILES} ${${PROJECT_NAME}_MOC_FILES})
+if ("${PROJECT_NAME}" STREQUAL "DRAWEXE")
+  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})
 
   install (TARGETS ${PROJECT_NAME}
            DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
 else()
-  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RESOURCE_FILES} ${${PROJECT_NAME}_MOC_FILES})
+  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE})
 
   if (MSVC)
     install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
@@ -235,7 +181,7 @@ else()
 endif()
 
 if (CURRENT_MODULE)
-  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "${OCC_TARGET_FOLDER}/${CURRENT_MODULE}")
+  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "Modules/${CURRENT_MODULE}")
   set_target_properties (${PROJECT_NAME} PROPERTIES MODULE "${CURRENT_MODULE}")
   if (APPLE)
     if (NOT "${INSTALL_NAME_DIR}" STREQUAL "")
@@ -261,7 +207,7 @@ set (USED_TOOLKITS_BY_CURRENT_PROJECT)
 set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)
 
 # parce EXTERNLIB file
-FILE_TO_LIST ("${RELATIVE_SOURCES_DIR}/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
+FILE_TO_LIST ("src/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
 foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
   string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
   if (NOT COMMENT_FOUND)
@@ -357,15 +303,6 @@ if (BUILD_SHARED_LIBS)
   target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
 endif()
 
-if (USE_QT)
-  foreach (PROJECT_LIBRARY_DEBUG ${PROJECT_LIBRARIES_DEBUG})
-    target_link_libraries (${PROJECT_NAME} debug ${PROJECT_LIBRARY_DEBUG})
-  endforeach()
-  foreach (PROJECT_LIBRARY_RELEASE ${PROJECT_LIBRARIES_RELEASE})
-    target_link_libraries (${PROJECT_NAME} optimized ${PROJECT_LIBRARY_RELEASE})
-  endforeach()
-endif()
-
 # suppress deprecation warnings inside OCCT itself for old gcc versions with unavailable Standard_DISABLE_DEPRECATION_WARNINGS
 if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUCXX)
   if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.6.0)

adm/cmake/occt_toolkit_prepare_sample.cmake

@@ -1,18 +0,0 @@
-if ("${TARGET_FOLDER}" STREQUAL "")
-  set (EXECUTABLE_PROJECT ON)
-  set (USE_QT ON)
-
-  set (RELATIVE_DIR "samples/qt")
-  set (MODULES_LIST ${OCCT_SAMPLES})
-  set (TARGET_FOLDER "Samples")
-  set (TOOLKITS_NAME_SUFFIX "SAMPLES_TOOLKITS")
-
-  include_directories("${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/${RELATIVE_DIR}")
-else()
-  unset (USE_QT)
-  unset (RELATIVE_DIR)
-  unset (EXECUTABLE_PROJECT)
-  unset (MODULES_LIST)
-  unset (TARGET_FOLDER)
-  unset (TOOLKITS_NAME_SUFFIX)
-endif("${TARGET_FOLDER}" STREQUAL "")

adm/cmake/occt_toolkit_prepare_tool.cmake

@@ -1,13 +0,0 @@
-if ("${TARGET_FOLDER}" STREQUAL "")
-  set (USE_QT ON)
-  set (RELATIVE_DIR "tools")
-  set (MODULES_LIST ${OCCT_TOOLS})
-  set (TARGET_FOLDER "Tools")
-  set (TOOLKITS_NAME_SUFFIX "TOOL_TOOLKITS")
-else()
-  unset (USE_QT)
-  unset (RELATIVE_DIR)
-  unset (MODULES_LIST)
-  unset (TARGET_FOLDER)
-  unset (TOOLKITS_NAME_SUFFIX)
-endif("${TARGET_FOLDER}" STREQUAL "")

adm/cmake/occt_toolkit_tool.cmake

@@ -0,0 +1,304 @@
+# script for each OCCT tool toolkit
+
+# Qt dependencies
+OCCT_INCLUDE_CMAKE_FILE (adm/cmake/qt_macro)
+
+FIND_QT_PACKAGE(PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT_INCLUDES)
+include_directories("${PROJECT_INCLUDES}"
+                    "${CMAKE_BINARY_DIR}/${INSTALL_DIR_INCLUDE}/tools")
+
+FILE_TO_LIST ("tools/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+# parce PACKAGES file
+
+if ("${PROJECT_NAME}" STREQUAL TInspectorEXE)
+  set (USED_PACKAGES ${PROJECT_NAME})
+  set (PACKAGE_PREFIX_DIR "samples/tools")
+  include_directories("${PROJECT_INCLUDES}"
+                      "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${PROJECT_NAME}")
+else()
+  FILE_TO_LIST ("tools/${PROJECT_NAME}/PACKAGES" USED_PACKAGES)
+  set (PACKAGE_PREFIX_DIR "tools")
+endif()
+
+
+SET (RCC_FILES)
+foreach (OCCT_PACKAGE ${USED_PACKAGES})
+  file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+
+  #message("Sources are ${SOURCE_FILES_C}")
+  FIND_AND_WRAP_MOC_FILES("${SOURCE_FILES_C}")
+
+  #message("Dir is ${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${OCCT_PACKAGE}.qrc")
+  FIND_AND_WRAP_RESOURCE_FILE("${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${OCCT_PACKAGE}.qrc" RCC_FILES)
+endforeach()
+#message("RCC_FILES for ${PROJECT_NAME} are ${RCC_FILES}")
+
+set (PRECOMPILED_DEFS)
+
+if (NOT BUILD_SHARED_LIBS)
+  list (APPEND PRECOMPILED_DEFS "-DOCCT_NO_PLUGINS")
+  if (WIN32)
+    list (APPEND PRECOMPILED_DEFS "-DHAVE_NO_DLL")
+  endif()
+endif()
+
+# Get all used packages from toolkit
+foreach (OCCT_PACKAGE ${USED_PACKAGES})
+
+  ADD_DEFINITIONS(-D${OCCT_PACKAGE}_EXPORTS)
+  
+  # TKService contains platform-dependent packages: Xw and WNT
+  if ((WIN32 AND "${OCCT_PACKAGE}" STREQUAL "Xw") OR (NOT WIN32 AND "${OCCT_PACKAGE}" STREQUAL "WNT"))
+    # do nothing
+  else()
+
+    if (WIN32)
+      list (APPEND PRECOMPILED_DEFS "-D__${OCCT_PACKAGE}_DLL")
+    endif()
+
+    set (SOURCE_FILES)
+    set (HEADER_FILES)
+
+    # Generate Flex and Bison files
+    if (${BUILD_YACCLEX})
+
+      # flex files
+      OCCT_ORIGIN_AND_PATCHED_FILES ("tools/${OCCT_PACKAGE}" "*[.]lex" SOURCE_FILES_FLEX)
+      list (LENGTH SOURCE_FILES_FLEX SOURCE_FILES_FLEX_LEN)
+
+      # bison files
+      OCCT_ORIGIN_AND_PATCHED_FILES ("tools/${OCCT_PACKAGE}" "*[.]yacc" SOURCE_FILES_BISON)
+      list (LENGTH SOURCE_FILES_BISON SOURCE_FILES_BISON_LEN)
+
+      if (${SOURCE_FILES_FLEX_LEN} EQUAL ${SOURCE_FILES_BISON_LEN} AND NOT ${SOURCE_FILES_FLEX_LEN} EQUAL 0)
+      
+        list (SORT SOURCE_FILES_FLEX)
+        list (SORT SOURCE_FILES_BISON)
+
+        math (EXPR SOURCE_FILES_FLEX_LEN "${SOURCE_FILES_FLEX_LEN} - 1")
+        foreach (FLEX_FILE_INDEX RANGE ${SOURCE_FILES_FLEX_LEN})
+
+          list (GET SOURCE_FILES_FLEX ${FLEX_FILE_INDEX} CURRENT_FLEX_FILE)
+          get_filename_component (CURRENT_FLEX_FILE_NAME ${CURRENT_FLEX_FILE} NAME_WE)
+
+          list (GET SOURCE_FILES_BISON ${FLEX_FILE_INDEX} CURRENT_BISON_FILE)
+          get_filename_component (CURRENT_BISON_FILE_NAME ${CURRENT_BISON_FILE} NAME_WE)
+          
+          string (COMPARE EQUAL ${CURRENT_FLEX_FILE_NAME} ${CURRENT_BISON_FILE_NAME} ARE_FILES_EQUAL)
+
+          if (EXISTS "${CURRENT_FLEX_FILE}" AND EXISTS "${CURRENT_BISON_FILE}" AND ${ARE_FILES_EQUAL})
+            set (BISON_OUTPUT_FILE ${CURRENT_BISON_FILE_NAME}.tab.c)
+            set (FLEX_OUTPUT_FILE lex.${CURRENT_FLEX_FILE_NAME}.c)
+            BISON_TARGET (Parser_${CURRENT_BISON_FILE_NAME} ${CURRENT_BISON_FILE} ${CMAKE_SOURCE_DIR}/tools/${OCCT_PACKAGE}/${BISON_OUTPUT_FILE} COMPILE_FLAGS "-p ${CURRENT_BISON_FILE_NAME}")
+            FLEX_TARGET  (Scanner_${CURRENT_FLEX_FILE_NAME} ${CURRENT_FLEX_FILE} ${CMAKE_SOURCE_DIR}/tools/${OCCT_PACKAGE}/${FLEX_OUTPUT_FILE} COMPILE_FLAGS "-P${CURRENT_FLEX_FILE_NAME}")
+            ADD_FLEX_BISON_DEPENDENCY (Scanner_${CURRENT_FLEX_FILE_NAME} Parser_${CURRENT_BISON_FILE_NAME})
+           
+            list (APPEND SOURCE_FILES ${BISON_OUTPUT_FILE} ${FLEX_OUTPUT_FILE})
+          endif()
+        endforeach()
+      endif()
+    endif()
+
+    # header files
+    if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES")
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" HEADER_FILES_GXX REGEX ".+[.]gxx")
+
+      file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" SOURCE_FILES_C REGEX ".+[.]c")
+      if(APPLE)
+        file (STRINGS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/FILES" SOURCE_FILES_M REGEX ".+[.]mm")
+      endif()
+    else()
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_M   REGEX ".+[.]h")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_LXX REGEX ".+[.]lxx")
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     HEADER_FILES_GXX REGEX ".+[.]gxx")
+
+      file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"     SOURCE_FILES_C REGEX ".+[.]c")
+      if(APPLE)
+        file (STRINGS "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/FILES"   SOURCE_FILES_M REGEX ".+[.]mm")
+      endif()
+    endif()
+
+
+    
+    list (APPEND HEADER_FILES ${HEADER_FILES_M} ${HEADER_FILES_LXX} ${SOURCE_FILES_GXX})
+    list (APPEND SOURCE_FILES ${SOURCE_FILES_C})
+    if(APPLE)
+      list (APPEND SOURCE_FILES ${SOURCE_FILES_M})
+    endif()
+
+    foreach(HEADER_FILE ${HEADER_FILES})
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+        list (APPEND USED_INCFILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${HEADER_FILE}")
+      else()
+        list (APPEND USED_INCFILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+        SOURCE_GROUP ("Header Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${HEADER_FILE}")
+      endif()
+    endforeach()
+
+
+    foreach(SOURCE_FILE ${SOURCE_FILES})
+      if (BUILD_PATCH AND EXISTS "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        message (STATUS "Info: consider patched file: ${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        list (APPEND USED_SRCFILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${BUILD_PATCH}/tools/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      else()
+        list (APPEND USED_SRCFILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+        SOURCE_GROUP ("Source Files\\${OCCT_PACKAGE}" FILES "${CMAKE_SOURCE_DIR}/${PACKAGE_PREFIX_DIR}/${OCCT_PACKAGE}/${SOURCE_FILE}")
+      endif()
+    endforeach()
+  endif()
+endforeach()
+string (REGEX REPLACE ";" " " PRECOMPILED_DEFS "${PRECOMPILED_DEFS}")
+
+set (USED_RCFILE "")
+if (MSVC)
+  set (USED_RCFILE "${CMAKE_BINARY_DIR}/resources/${PROJECT_NAME}.rc")
+
+  if (APPLY_OCCT_PATCH_DIR AND EXISTS "${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in")
+    configure_file("${APPLY_OCCT_PATCH_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
+  else()
+    configure_file("${CMAKE_SOURCE_DIR}/adm/templates/occt_toolkit.rc.in" "${USED_RCFILE}" @ONLY)
+  endif()
+endif()
+
+set (CURRENT_MODULE)
+foreach (OCCT_MODULE ${OCCT_TOOLS})
+  list (FIND ${OCCT_MODULE}_TOOL_TOOLKITS ${PROJECT_NAME} CURRENT_PROJECT_IS_BUILT)
+  if (NOT ${CURRENT_PROJECT_IS_BUILT} EQUAL -1)
+    set (CURRENT_MODULE ${OCCT_MODULE})
+  endif()
+endforeach()
+
+if (NOT SINGLE_GENERATOR)
+  OCCT_INSERT_CODE_FOR_TARGET ()
+endif()
+
+if ("${PROJECT_NAME}" STREQUAL TInspectorEXE)
+  add_executable (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RCC_FILES})
+
+  install (TARGETS ${PROJECT_NAME}
+           DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
+else()
+  add_library (${PROJECT_NAME} ${USED_SRCFILES} ${USED_INCFILES} ${USED_RCFILE} ${RCC_FILES})
+
+  if (MSVC)
+    install (FILES  ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
+             CONFIGURATIONS Debug RelWithDebInfo
+             DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
+  endif()
+
+  if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
+    set (CMAKE_SHARED_LIBRARY_SUFFIX_DEFAULT ${CMAKE_SHARED_LIBRARY_SUFFIX})
+    set (CMAKE_SHARED_LIBRARY_SUFFIX "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}${CMAKE_SHARED_LIBRARY_SUFFIX}")
+  endif()
+
+  install (TARGETS ${PROJECT_NAME}
+           EXPORT OpenCASCADE${CURRENT_MODULE}Targets
+           RUNTIME DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}"
+           ARCHIVE DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}"
+           LIBRARY DESTINATION "${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}")
+
+
+  if (NOT WIN32)
+    if (BUILD_SHARED_LIBS AND NOT "${BUILD_SHARED_LIBRARY_NAME_POSTFIX}" STREQUAL "")
+      set (LINK_NAME    "${INSTALL_DIR}/${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}/lib${PROJECT_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX_DEFAULT}/tools")
+      set (LIBRARY_NAME "${INSTALL_DIR}/${INSTALL_DIR_LIB}\${OCCT_INSTALL_BIN_LETTER}/lib${PROJECT_NAME}${CMAKE_SHARED_LIBRARY_SUFFIX}/tools")
+      OCCT_CREATE_SYMLINK_TO_FILE (${LIBRARY_NAME} ${LINK_NAME})
+    endif()
+  endif()
+endif()
+
+if (CURRENT_MODULE)
+  set_target_properties (${PROJECT_NAME} PROPERTIES FOLDER "Tools/${CURRENT_MODULE}")
+  set_target_properties (${PROJECT_NAME} PROPERTIES MODULE "${CURRENT_MODULE}")
+  if (APPLE)
+    if (NOT "${INSTALL_NAME_DIR}" STREQUAL "")
+      set_target_properties (${PROJECT_NAME} PROPERTIES BUILD_WITH_INSTALL_RPATH 1 INSTALL_NAME_DIR "${INSTALL_NAME_DIR}")
+    endif()
+  endif()
+endif()
+
+get_property (OCC_VERSION_MAJOR GLOBAL PROPERTY OCC_VERSION_MAJOR)
+get_property (OCC_VERSION_MINOR GLOBAL PROPERTY OCC_VERSION_MINOR)
+get_property (OCC_VERSION_MAINTENANCE GLOBAL PROPERTY OCC_VERSION_MAINTENANCE)
+
+if (ANDROID)
+  # do not append version to the filename
+  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}")
+else()
+  set_target_properties (${PROJECT_NAME} PROPERTIES COMPILE_FLAGS "${PRECOMPILED_DEFS}"
+                                                    SOVERSION     "${OCC_VERSION_MAJOR}"
+                                                    VERSION       "${OCC_VERSION_MAJOR}.${OCC_VERSION_MINOR}.${OCC_VERSION_MAINTENANCE}")
+endif()
+
+set (USED_TOOLKITS_BY_CURRENT_PROJECT)
+set (USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT)
+
+# parce EXTERNLIB file
+FILE_TO_LIST ("${PACKAGE_PREFIX_DIR}/${PROJECT_NAME}/EXTERNLIB" USED_EXTERNLIB_AND_TOOLKITS)
+foreach (USED_ITEM ${USED_EXTERNLIB_AND_TOOLKITS})
+  string (REGEX MATCH "^ *#" COMMENT_FOUND ${USED_ITEM})
+  if (NOT COMMENT_FOUND)
+    string (REGEX MATCH "^TK" TK_FOUND ${USED_ITEM})
+    string (REGEX MATCH "^vtk" VTK_FOUND ${USED_ITEM})
+    
+    if (NOT "${TK_FOUND}" STREQUAL "" OR NOT "${VTK_FOUND}" STREQUAL "")
+      list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT ${USED_ITEM})
+      if (NOT "${VTK_FOUND}" STREQUAL "" AND BUILD_SHARED_LIBS AND INSTALL_VTK AND COMMAND OCCT_INSTALL_VTK)
+        OCCT_INSTALL_VTK(${USED_ITEM})
+      endif()
+    else()
+      string (REGEX MATCH "^CSF_" CSF_FOUND ${USED_ITEM})
+      if ("${CSF_FOUND}" STREQUAL "")
+        message (STATUS "Info: ${USED_ITEM} from ${PROJECT_NAME} skipped due to it is empty")
+      else() # get CSF_ value
+        set (CURRENT_CSF ${${USED_ITEM}})
+        if (NOT "x${CURRENT_CSF}" STREQUAL "x")
+          # prepare a list from a string with whitespaces
+          separate_arguments (CURRENT_CSF)
+          list (APPEND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT ${CURRENT_CSF})
+        endif()
+      endif()
+    endif()
+  endif()
+endforeach()
+
+if (APPLE)
+  list (FIND USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT X11 IS_X11_FOUND)
+  if (NOT ${IS_X11_FOUND} EQUAL -1)
+    find_package (X11 COMPONENTS X11 Xext Xmu Xi)
+    if (NOT X11_FOUND)
+      message (STATUS "Warning: X11 is not found. It's required to install The XQuartz project: http://www.xquartz.org")
+    endif()
+  endif()
+endif()
+
+# Update list of used VTK libraries if OpenGL2 Rendering BackEnd is used.
+# Add VTK_OPENGL2_BACKEND definition.
+if("${VTK_RENDERING_BACKEND}" STREQUAL "OpenGL2")
+  add_definitions(-DVTK_OPENGL2_BACKEND)
+  foreach (VTK_EXCLUDE_LIBRARY vtkRenderingOpenGL vtkRenderingFreeTypeOpenGL)
+    list (FIND USED_TOOLKITS_BY_CURRENT_PROJECT "${VTK_EXCLUDE_LIBRARY}" IS_VTK_OPENGL_FOUND)
+    if (NOT ${IS_VTK_OPENGL_FOUND} EQUAL -1)
+      list (REMOVE_ITEM USED_TOOLKITS_BY_CURRENT_PROJECT ${VTK_EXCLUDE_LIBRARY})
+      if (${VTK_EXCLUDE_LIBRARY} STREQUAL vtkRenderingOpenGL)
+        list (APPEND USED_TOOLKITS_BY_CURRENT_PROJECT vtkRenderingOpenGL2)
+      endif()
+    endif()
+  endforeach()
+endif()
+
+if (BUILD_SHARED_LIBS)
+  target_link_libraries (${PROJECT_NAME} ${USED_TOOLKITS_BY_CURRENT_PROJECT} ${USED_EXTERNAL_LIBS_BY_CURRENT_PROJECT})
+endif()
+
+# Set Qt dependencies
+target_link_libraries(${PROJECT_NAME} "${PROJECT_LIBRARIES}")
+
+target_link_libraries(${PROJECT_NAME} debug "${PROJECT_LIBRARIES_DEBUG}")
+target_link_libraries(${PROJECT_NAME} optimized "${PROJECT_LIBRARIES_RELEASE}")
+

adm/cmake/qt.cmake

@@ -7,8 +7,8 @@ THIRDPARTY_PRODUCT("QT" "" "CSF_QtCore" "d")
 list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_QT_DIR}/bin")
 
 list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_INCLUDE_DIR")
-list (REMOVE_ITEM 3RDPARTY_NO_LIBS "3RDPARTY_QT_LIBRARY_DIR")
-list (REMOVE_ITEM 3RDPARTY_NO_DLLS "3RDPARTY_QT_DLL_DIR")
+list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_LIBRARY_DIR")
+list (REMOVE_ITEM 3RDPARTY_NOT_INCLUDED "3RDPARTY_QT_DLL_DIR")
 
 UNSET (${3RDPARTY_QT_DLL} CACHE)
 UNSET (${3RDPARTY_QT_DLL_DIR} CACHE)
@@ -18,19 +18,3 @@ UNSET (${3RDPARTY_QT_LIBRARY_DIR} CACHE)
 
 set (USED_3RDPARTY_QT_DIR "${3RDPARTY_QT_DIR}")
 message (STATUS "Info: Qt is used from folder: ${3RDPARTY_QT_DIR}")
-
-# Now set CMAKE_PREFIX_PATH to point to local Qt installation.
-# Without this setting find_package() will not work
-set(CMAKE_PREFIX_PATH ${3RDPARTY_QT_DIR})
-
-# Now we can apply standard CMake finder for Qt5. We do this mostly
-# to have qt5_wrap_cpp() function available and Qt5_FOUND variable filled
-find_package(Qt5 QUIET COMPONENTS Widgets Quick Xml PATHS ${3RDPARTY_QT_DIR} NO_DEFAULT_PATH)
-if (NOT ${Qt5_FOUND})
-  # Now we can apply standard CMake finder for Qt. We do this mostly
-  # to have qt4_wrap_cpp() function available
-  find_package(Qt4)
-  #message (STATUS "Qt4 cmake configuration")
-else()
-  #message (STATUS "Qt5 cmake configuration")
-endif()

adm/cmake/qt_macro.cmake

@@ -6,50 +6,51 @@ macro (FIND_QT_PACKAGE PROJECT_LIBRARIES_DEBUG PROJECT_LIBRARIES_RELEASE PROJECT
     message (FATAL_ERROR "Empty Qt dir")
   endif()
 
+  # Now set CMAKE_PREFIX_PATH to point to local Qt installation.
+  # Without this setting find_package() will not work
+  set(CMAKE_PREFIX_PATH ${3RDPARTY_QT_DIR})
+
+  # Now we can apply standard CMake finder for Qt5. We do this mostly
+  # to have qt5_wrap_cpp() function available
+  find_package(Qt5 QUIET COMPONENTS Widgets PATHS ${3RDPARTY_QT_DIR} NO_DEFAULT_PATH)
   if (${Qt5_FOUND})
     #message (STATUS "Qt5 cmake configuration")
 
-    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}" "${Qt5Quick_INCLUDE_DIRS}" "${Qt5Xml_INCLUDE_DIRS}")
-    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}" "${Qt5Quick_LIBRARIES}" "${Qt5Xml_LIBRARIES}")
-    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}" "${Qt5Quick_LIBRARIES}" "${Qt5Xml_LIBRARIES}")
-
-    # processing *.ts files to generate *.qm
-    find_package(Qt5LinguistTools)
-    get_target_property(QT_LRELEASE_EXECUTABLE Qt5::lrelease LOCATION)
-    mark_as_advanced(QT_LRELEASE_EXECUTABLE)
-
-    GET_FILENAME_COMPONENT(QT_BINARY_DIR ${QT_LRELEASE_EXECUTABLE} DIRECTORY)
-    MARK_AS_ADVANCED(QT_BINARY_DIR)
+    set(PROJECT_INCLUDES "${Qt5Widgets_INCLUDE_DIRS}")
+    set(PROJECT_LIBRARIES_DEBUG "${Qt5Widgets_LIBRARIES}")
+    set(PROJECT_LIBRARIES_RELEASE "${Qt5Widgets_LIBRARIES}")
   else()
+    # Now we can apply standard CMake finder for Qt. We do this mostly
+    # to have qt4_wrap_cpp() function available
+    find_package(Qt4)
+
     #message (STATUS "Qt4 cmake configuration")
     set(PROJECT_INCLUDES ${QT_INCLUDES})
     if (WIN32)
-      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/QtCored4.lib;${3RDPARTY_QT_DIR}/lib/QtGuid4.lib;${3RDPARTY_QT_DIR}/lib/QtXmld4.lib")
-      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/QtCore4.lib;${3RDPARTY_QT_DIR}/lib/QtGui4.lib;${3RDPARTY_QT_DIR}/lib/QtXml4.lib")
+      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/QtCored4.lib;${3RDPARTY_QT_DIR}/lib/QtGuid4.lib")
+      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/QtCore4.lib;${3RDPARTY_QT_DIR}/lib/QtGui4.lib")
     else()
-      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so;${3RDPARTY_QT_DIR}/lib/libQtXml.so")
-      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so;${3RDPARTY_QT_DIR}/lib/libQtXml.so")
+      set(PROJECT_LIBRARIES_DEBUG "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
+      set(PROJECT_LIBRARIES_RELEASE "${3RDPARTY_QT_DIR}/lib/libQtCore.so;${3RDPARTY_QT_DIR}/lib/libQtGui.so")
     endif(WIN32)
-    find_program(QT_LRELEASE_EXECUTABLE lrelease)
   endif()
 endmacro()
 
 
-macro (FIND_AND_WRAP_MOC_FILES HEADER_FILES GENERATED_MOC_FILES)
-  set (GENERATED_MOC_FILES "")
-  foreach (FILE ${HEADER_FILES})
-    # processing only files where Q_OBJECT exists
-    file(STRINGS "${FILE}" LINES REGEX "Q_OBJECT")
-    if(LINES)
-      unset (MOC_FILE)
-      if (${Qt5_FOUND})
-        qt5_wrap_cpp(MOC_FILE ${FILE})
-      else()
-        qt4_wrap_cpp(MOC_FILE ${FILE})
-      endif()
-      #message (STATUS "... Info: next MOC file ${MOC_FILE}")
-      list(APPEND ${GENERATED_MOC_FILES} ${MOC_FILE})
-     endif(LINES)
+macro (FIND_AND_WRAP_MOC_FILES SOURCE_FILES)
+
+  SET(CMAKE_AUTOMOC ON)
+
+  foreach (FILE ${SOURCE_FILES})
+    set (src_files ${src_files} ${FILE})
+    unset (MOC_FILE)
+    if (${Qt5_FOUND})
+      qt5_wrap_cpp(MOC_FILE ${FILE})
+    else()
+      qt4_wrap_cpp(MOC_FILE ${FILE})
+    endif()
+    #message (STATUS "... Info: next MOC file ${MOC_FILE}")
+
   endforeach (FILE)
 
 endmacro()
@@ -67,51 +68,3 @@ macro (FIND_AND_WRAP_RESOURCE_FILE RESOURCE_FILE_NAME RCC_FILES)
     endif()
   endif()
 endmacro()
-
-macro (FIND_AND_WRAP_TS_FILE RESOURCE_FILE_NAME TARGET_FOLDER QM_FILES)
-  if(EXISTS "${RESOURCE_FILE_NAME}")
-    if (${Qt5_FOUND})
-      qt5_add_translation(QM_FILES "${RESOURCE_FILE_NAME}")
-    else()
-      qt4_add_translation(QM_FILES "${RESOURCE_FILE_NAME}")
-    endif()
-  endif()
-endmacro()
-
-macro (FIND_AND_INSTALL_QT_RESOURCES OCCT_PACKAGE RESOURCE_FILES)
-  file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   TS_FILES   REGEX ".+[.]ts")
-  file (STRINGS "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/FILES"   QRC_FILES  REGEX ".+[.]qrc")
-
-  string (FIND "${OCCT_PACKAGE}" "/" _index)
-  if (_index GREATER -1)
-    math (EXPR _index "${_index}")
-    string (SUBSTRING "${OCCT_PACKAGE}" 0 ${_index} OCCT_PACKAGE_NAME)
-  else()
-    set (OCCT_PACKAGE_NAME "${OCCT_PACKAGE}")
-  endif(_index GREATER -1)
-
-  #message("QRC files are: ${QRC_FILES} in ${OCCT_PACKAGE}")
-  foreach (QRC_FILE ${QRC_FILES})
-    set (QRC_FILE_RELATIVE "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${QRC_FILE}")
-    if (EXISTS ${QRC_FILE_RELATIVE})
-      FIND_AND_WRAP_RESOURCE_FILE(${QRC_FILE_RELATIVE} RCC_FILES)
-      list (APPEND ${RESOURCE_FILES} "${RCC_FILES}")
-    endif()
-  endforeach()
-
-  #message("TS files are: ${TS_FILES} in ${OCCT_PACKAGE}")
-  foreach (TS_FILE ${TS_FILES})
-    set (TS_FILE_RELATIVE "${CMAKE_SOURCE_DIR}/${RELATIVE_SOURCES_DIR}/${OCCT_PACKAGE}/${TS_FILE}")
-    FIND_AND_WRAP_TS_FILE(${TS_FILE_RELATIVE} "${TARGET_FOLDER}/${CURRENT_MODULE}" QM_FILES)
-    if (EXISTS ${TS_FILE_RELATIVE})
-      list (APPEND ${RESOURCE_FILES} "${TS_FILE_RELATIVE}")
-      list (APPEND ${RESOURCE_FILES} "${QM_FILES}")
-    endif()
-  endforeach()
-
-  foreach (QM_FILE ${QM_FILES})
-    INSTALL(FILES ${QM_FILE} DESTINATION "${INSTALL_DIR_RESOURCE}/samples")
-    #message("install *.qm files (${QM_FILE}) to: ${INSTALL_DIR_RESOURCE}/samples")
-  endforeach (QM_FILE ${QM_FILES})
-endmacro()
-

adm/cmake/tbb.cmake

@@ -173,7 +173,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
   if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR AND EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY_DIR)
 
     set (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY "" CACHE FILEPATH "The path to ${upper_PRODUCT_LIBRARY_NAME} library" FORCE)
   endif()
@@ -226,7 +226,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
     if (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR OR EXISTS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL_DIR)
     endif()
   endif()
 
@@ -275,7 +275,7 @@ macro (TBB_PRODUCT_SEARCH PRODUCT_LIBRARY_NAME)
   mark_as_advanced (3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_LIBRARY 3RDPARTY_${upper_PRODUCT_LIBRARY_NAME}_DLL)
 endmacro()
 
-#if (BUILD_SHARED_LIBS)
+if (BUILD_SHARED_LIBS)
   separate_arguments (CSF_TBB)
   foreach (LIB IN LISTS CSF_TBB)
     TBB_PRODUCT_SEARCH (${LIB})
@@ -291,4 +291,4 @@ endmacro()
       set (USED_3RDPARTY_TBB_DIR ${3RDPARTY_TBB_LIBRARY_DIR})
     endif()
   endif()
-#endif()
+endif()

adm/cmake/tcl.cmake

@@ -184,14 +184,14 @@ if (BUILD_SHARED_LIBS)
   if (3RDPARTY_TCL_LIBRARY AND EXISTS "${3RDPARTY_TCL_LIBRARY}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_TCL_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_TCL_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TCL_LIBRARY_DIR)
   endif()
 
   if (WIN32)
     if (3RDPARTY_TCL_DLL OR EXISTS "${3RDPARTY_TCL_DLL}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_TCL_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_TCL_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TCL_DLL_DIR)
     endif()
   endif()
 

adm/cmake/tk.cmake

@@ -190,14 +190,14 @@ if (BUILD_SHARED_LIBS)
   if (3RDPARTY_TK_LIBRARY AND EXISTS "${3RDPARTY_TK_LIBRARY}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS "${3RDPARTY_TK_LIBRARY_DIR}")
   else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_TK_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TK_LIBRARY_DIR)
   endif()
 
   if (WIN32)
     if (3RDPARTY_TK_DLL OR EXISTS "${3RDPARTY_TK_DLL}")
       list (APPEND 3RDPARTY_DLL_DIRS "${3RDPARTY_TK_DLL_DIR}")
     else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_TK_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_TK_DLL_DIR)
     endif()
   endif()
 

adm/cmake/vardescr.cmake

@@ -40,7 +40,7 @@ Precompiled headers are generated automatically by Cotire tool.")
 # install variables
 set (INSTALL_DIR_DESCR 
 "The place where built OCCT libraries, headers, test cases (INSTALL_TEST_CASES variable),
-samples (INSTALL_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_TBB and
+samples (INSTALL_SAMPLES_DESCR variable) and certain 3rdparties (INSTALL_GL2PS, INSTALL_TBB and
 other similar variables) will be placed during the installation process (building INSTALL project)")
 
 set (INSTALL_DIR_WITH_VERSION_DESCR
@@ -88,6 +88,7 @@ INSTALL_MESSAGE (INSTALL_EIGEN            "EIGEN header files")
 INSTALL_MESSAGE (INSTALL_EGL              "EGL binaries")
 INSTALL_MESSAGE (INSTALL_GLES2            "OpenGL ES 2.0 binaries")
 INSTALL_MESSAGE (INSTALL_FREETYPE         "FreeType binaries")
+INSTALL_MESSAGE (INSTALL_GL2PS            "GL2PS binaries")
 INSTALL_MESSAGE (INSTALL_TBB              "TBB binaries")
 INSTALL_MESSAGE (INSTALL_TCL              "TCL binaries")
 INSTALL_MESSAGE (INSTALL_TK               "TK binaries")
@@ -116,16 +117,11 @@ want to build some particular libraries (toolkits) only, then you may uncheck
 all modules in the corresponding BUILD_MODUE_* options and provide the list of
 necessary libraries here. Of course, all dependencies will be resolved automatically")
 
-set (BUILD_SAMPLES_MFC_DESCR
+set (BUILD_MODULE_MfcSamples_DESCR
 "Indicates whether OCCT MFC samples should be built together with OCCT.
 These samples show some possibilities of using OCCT and they can be executed
 with script samples.bat from the installation directory (INSTALL_DIR)")
 
-set (BUILD_SAMPLES_QT_DESCR
-"Indicates whether OCCT Qt samples should be built together with OCCT.
-These samples show some possibilities of using OCCT and they can be executed
-with script samples.bat from the installation directory (INSTALL_DIR)")
-
 set (BUILD_Inspector_DESCR
 "Indicates whether OCCT inspector should be built together with OCCT.
 This inspector provides functionality to interactively inspect low-level content
@@ -164,6 +160,10 @@ set (USE_GLES2_DESCR
 "Indicates whether OpenGL ES 2.0 should be used in OCCT visualization
 module instead of desktop OpenGL")
 
+set (USE_GL2PS_DESCR
+"Indicates whether GL2PS product should be used in OCCT visualization
+module for support of vector image formats (PS, EPS etc)")
+
 set (USE_TBB_DESCR
 "Indicates whether TBB is used or not. TBB stands for Threading Building Blocks,
 the technology of Intel Corp, which comes with different mechanisms and patterns for

adm/cmake/vtk.cmake

@@ -31,7 +31,7 @@ if (NOT DEFINED 3RDPARTY_VTK_INCLUDE_DIR)
   set (3RDPARTY_VTK_INCLUDE_DIR "" CACHE PATH "The directory containing headers of VTK")
 endif()
 
-#if (BUILD_SHARED_LIBS)
+if (BUILD_SHARED_LIBS)
   # vtk library directory
   if (NOT DEFINED 3RDPARTY_VTK_LIBRARY_DIR)
     set (3RDPARTY_VTK_LIBRARY_DIR "" CACHE PATH "The directory containing VTK libraries")
@@ -41,7 +41,7 @@ endif()
   if (WIN32 AND NOT DEFINED 3RDPARTY_VTK_DLL_DIR)
     set (3RDPARTY_VTK_DLL_DIR "" CACHE PATH "The directory containing VTK shared libraries")
   endif()
-#endif()
+endif()
 
 # check 3RDPARTY_VTK_ paths for consistency with specified 3RDPARTY_VTK_DIR
 if (3RDPARTY_VTK_DIR AND EXISTS "${3RDPARTY_VTK_DIR}")
@@ -75,10 +75,10 @@ if (VTK_FOUND)
 
     set (3RDPARTY_VTK_INCLUDE_DIRS)
 
-#    if (BUILD_SHARED_LIBS)
+    if (BUILD_SHARED_LIBS)
       set (3RDPARTY_VTK_LIBRARY_DIRS)
       set (3RDPARTY_VTK_DLL_DIRS)
-#    endif()
+    endif()
 
     foreach (VTK_LIBRARY ${VTK_LIBRARIES})
       string (REGEX MATCH "^vtk" IS_VTK_LIBRARY ${VTK_LIBRARY})
@@ -168,7 +168,7 @@ if (VTK_FOUND)
     set (3RDPARTY_VTK_INCLUDE_DIR "${3RDPARTY_VTK_INCLUDE_DIR}" CACHE PATH "The directory containing headers of VTK" FORCE)
   endif()
 
-#  if (BUILD_SHARED_LIBS)
+  if (BUILD_SHARED_LIBS)
     if (3RDPARTY_VTK_LIBRARY_DIRS)
       list (REMOVE_DUPLICATES 3RDPARTY_VTK_LIBRARY_DIRS)
       list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIRS})
@@ -186,7 +186,7 @@ if (VTK_FOUND)
         set (3RDPARTY_VTK_DLL_DIR "${3RDPARTY_VTK_DLL_DIR}" CACHE PATH "The directory containing VTK shared libraries" FORCE)
       endif()
     endif()
-#  endif()
+  endif()
 
 if (3RDPARTY_VTK_INCLUDE_DIR AND EXISTS "${3RDPARTY_VTK_INCLUDE_DIR}")
   list (APPEND 3RDPARTY_INCLUDE_DIRS ${3RDPARTY_VTK_INCLUDE_DIR})
@@ -198,14 +198,14 @@ if (BUILD_SHARED_LIBS)
   if (3RDPARTY_VTK_LIBRARY_DIR AND EXISTS "${3RDPARTY_VTK_LIBRARY_DIR}")
     list (APPEND 3RDPARTY_LIBRARY_DIRS ${3RDPARTY_VTK_LIBRARY_DIR})
   else()
-    list (APPEND 3RDPARTY_NO_LIBS 3RDPARTY_VTK_LIBRARY_DIR)
+    list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_LIBRARY_DIR)
   endif()
 
   if (WIN32)
     if (3RDPARTY_VTK_DLL_DIR OR EXISTS "${3RDPARTY_VTK_DLL_DIR}")
       list (APPEND 3RDPARTY_DLL_DIRS ${3RDPARTY_VTK_DLL_DIR})
     else()
-      list (APPEND 3RDPARTY_NO_DLLS 3RDPARTY_VTK_DLL_DIR)
+      list (APPEND 3RDPARTY_NOT_INCLUDED 3RDPARTY_VTK_DLL_DIR)
     endif()
   endif()
 endif()

adm/genconf.tcl

@@ -139,6 +139,9 @@ proc wokdep:gui:UpdateList {} {
   wokdep:SearchFreeType  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   wokdep:SearchX11       anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   if { "$::HAVE_GLES2" == "true" } {
+    if { "$::HAVE_GL2PS" == "true" } {
+      lappend anIncErrs "Error: gl2ps can not be used with OpenGL ES"
+    }
     wokdep:SearchEGL     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
     wokdep:SearchGLES    anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   }
@@ -148,6 +151,9 @@ proc wokdep:gui:UpdateList {} {
   if { "$::HAVE_FFMPEG" == "true" } {
     wokdep:SearchFFmpeg  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   }
+  if { "$::HAVE_GL2PS" == "true" } {
+    wokdep:SearchStandardLibrary  anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs "gl2ps" "gl2ps.h" "gl2ps" {"gl2ps"}
+  }
   if { "$::HAVE_TBB" == "true" } {
     wokdep:SearchTBB     anIncErrs anLib32Errs anLib64Errs anBin32Errs anBin64Errs
   }
@@ -409,6 +415,8 @@ entry         .myFrame.mySrchEntry     -textvariable PRODUCTS_PATH -width 80
 ttk::button   .myFrame.mySrchBrowseBtn -text "Browse" -command wokdep:gui:BrowsePartiesRoot
 checkbutton   .myFrame.myChecks.myFImageCheck   -offvalue "false" -onvalue "true" -variable HAVE_FREEIMAGE -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myFImageLbl     -text "Use FreeImage"
+checkbutton   .myFrame.myChecks.myGl2psCheck    -offvalue "false" -onvalue "true" -variable HAVE_GL2PS     -command wokdep:gui:UpdateList
+ttk::label    .myFrame.myChecks.myGl2psLbl      -text "Use GL2PS"
 checkbutton   .myFrame.myChecks.myTbbCheck      -offvalue "false" -onvalue "true" -variable HAVE_TBB       -command wokdep:gui:UpdateList
 ttk::label    .myFrame.myChecks.myTbbLbl        -text "Use Intel TBB"
 if { "$::tcl_platform(os)" != "Darwin" } {
@@ -537,6 +545,9 @@ if { "$::tcl_platform(os)" != "Darwin" } {
 grid .myFrame.myChecks.myZLibCheck     -row $aCheckRowIter -column 6 -sticky e
 grid .myFrame.myChecks.myZLibLbl       -row $aCheckRowIter -column 7 -sticky w
 
+grid .myFrame.myChecks.myGl2psCheck    -row $aCheckRowIter -column 8 -sticky e
+grid .myFrame.myChecks.myGl2psLbl      -row $aCheckRowIter -column 9 -sticky w
+
 grid .myFrame.myChecks.myQt4Check      -row $aCheckRowIter -column 10 -sticky e
 grid .myFrame.myChecks.myQt4Lbl        -row $aCheckRowIter -column 11 -sticky w
 

adm/genconfdeps.tcl

@@ -65,7 +65,7 @@ if { [info exists ::env(SHORTCUT_HEADERS)] } {
 }
 
 # fetch environment variables (e.g. set by custom.sh or custom.bat) and set them as tcl variables with the same name
-set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_ZLIB HAVE_LIBLZMA HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
+set THE_ENV_VARIABLES {HAVE_FREEIMAGE HAVE_FFMPEG HAVE_TBB HAVE_GLES2 HAVE_D3D HAVE_VTK HAVE_GL2PS HAVE_ZLIB HAVE_LIBLZMA HAVE_OPENCL CHECK_QT4 CHECK_JDK MACOSX_USE_GLX HAVE_RelWithDebInfo}
 foreach anEnvIter $THE_ENV_VARIABLES {
   set ${anEnvIter} "false"
   if { [info exists ::env(${anEnvIter})] } {

adm/genproj.tcl

@@ -1318,6 +1318,9 @@ proc osutils:csfList { theOS theCsfLibsMap theCsfFrmsMap } {
   if { "$::HAVE_FFMPEG" == "true" } {
     set aLibsMap(CSF_FFmpeg) "avcodec avformat swscale avutil"
   }
+  if { "$::HAVE_GL2PS" == "true" } {
+    set aLibsMap(CSF_GL2PS) "gl2ps"
+  }
   if { "$::HAVE_TBB" == "true" } {
     set aLibsMap(CSF_TBB) "tbb tbbmalloc"
   }
@@ -1724,7 +1727,7 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
   regsub -all -- {__TKDEP__} $theProjTmpl $aUsedLibs theProjTmpl
 
   set anIncPaths "..\\..\\..\\inc"
-#  set aTKDefines ""
+  set aTKDefines ""
   set aFilesSection ""
   set aVcFilesX(units) ""
   set listloc [osutils:tk:units $theToolKit]
@@ -1791,13 +1794,13 @@ proc osutils:vcproj { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
     }
 
     # macros
-#    append aTKDefines ";__${xlo}_DLL"
+    append aTKDefines ";__${xlo}_DLL"
     # common includes
 #    append anIncPaths ";..\\..\\..\\src\\${xlo}"
   }
 
   regsub -all -- {__TKINC__}  $theProjTmpl $anIncPaths theProjTmpl
-#  regsub -all -- {__TKDEFS__} $theProjTmpl $aTKDefines theProjTmpl
+  regsub -all -- {__TKDEFS__} $theProjTmpl $aTKDefines theProjTmpl
   regsub -all -- {__FILES__}  $theProjTmpl $aFilesSection theProjTmpl
 
   # write file
@@ -1863,7 +1866,6 @@ proc osutils:tk:files { tkloc thePlatform } {
          "t" { set utyp "toolkit" }
          "n" { set utyp "nocdlpack" }
          "x" { set utyp "executable" }
-         default { error "Error: Cannot determine type of unit $loc, check adm/UDLIST!" }
     }
     if [array exists map] { unset map }
     osutils:tk:loadunit $loc map
@@ -1945,10 +1947,10 @@ proc osutils:vcprojx { theVcVer isUWP theOutDir theToolKit theGuidsMap } {
       puts "Warning : in vcproj there are than one occurences for [file tail $f]"
     }
     #puts "$aProjTmpl $aFilesSection"
-#    set aTKDefines ";__${theToolKit}_DLL"
+    set aTKDefines ";__${theToolKit}_DLL"
     set anIncPaths "..\\..\\..\\inc"
     regsub -all -- {__TKINC__}  $aProjTmpl $anIncPaths    aProjTmpl
-#    regsub -all -- {__TKDEFS__} $aProjTmpl $aTKDefines    aProjTmpl
+    regsub -all -- {__TKDEFS__} $aProjTmpl $aTKDefines    aProjTmpl
     regsub -all -- {__FILES__}  $aProjTmpl $aFilesSection aProjTmpl
     regsub -all -- {__CONF__}   $aProjTmpl Application    aProjTmpl
 
@@ -2160,9 +2162,9 @@ proc osutils:cbptk { theCmpl theOutDir theToolKit thePlatform} {
     }
 
     # macros for correct DLL exports
-#    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
-#      lappend aTKDefines "__${xlo}_DLL"
-#    }
+    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
+      lappend aTKDefines "__${xlo}_DLL"
+    }
   }
 
   return [osutils:cbp $theCmpl $theOutDir $theToolKit $thePlatform $aTKSrcFiles $aUsedLibs $aFrameworks $anIncPaths $aTKDefines]
@@ -2279,9 +2281,9 @@ proc osutils:cbpx { theCmpl theOutDir theToolKit thePlatform } {
     }
 
     # macros for correct DLL exports
-#    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
-#      lappend aTKDefines "__${theToolKit}_DLL"
-#    }
+    if { $thePlatform == "wnt" || $thePlatform == "uwp" } {
+      lappend aTKDefines "__${theToolKit}_DLL"
+    }
 
     # common include paths
     lappend anIncPaths "../../../inc"

adm/templates/OpenCASCADEConfig.cmake.in

@@ -58,6 +58,7 @@ set (OpenCASCADE_BUILD_SHARED_LIBS @BUILD_SHARED_LIBS@)
 set (OpenCASCADE_WITH_TCL       @USE_TCL@)
 set (OpenCASCADE_WITH_FREETYPE  @USE_FREETYPE@)
 set (OpenCASCADE_WITH_FREEIMAGE @USE_FREEIMAGE@)
+set (OpenCASCADE_WITH_GL2PS     @USE_GL2PS@)
 set (OpenCASCADE_WITH_TBB       @USE_TBB@)
 set (OpenCASCADE_WITH_VTK       @USE_VTK@)
 set (OpenCASCADE_WITH_FFMPEG    @USE_FFMPEG@)

adm/templates/TInspectorEXE.vcxproj.user.in

@@ -4,7 +4,7 @@
   <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
 CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
 QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@;%PATH%
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
  </LocalDebuggerEnvironment>
  <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
  <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
@@ -13,7 +13,7 @@ PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@;%PATH%
   <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
 CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
 QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@i;%PATH%
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
  </LocalDebuggerEnvironment>
  <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
  <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>
@@ -22,7 +22,7 @@ PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@i;%PATH%
   <LocalDebuggerEnvironment>CASROOT=@CMAKE_SOURCE_DIR@
 CSF_OCCTDataPath=@CMAKE_SOURCE_DIR@/data
 QTDIR=@3RDPARTY_QT_DIR@
-PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;@OpenCASCADE_BINARY_DIR@d;%PATH%
+PATH=@3RDPARTY_DLL_DIRS_FOR_PATH@;%PATH%
  </LocalDebuggerEnvironment>
  <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
  <LocalDebuggerWorkingDirectory>@CMAKE_BINARY_DIR@</LocalDebuggerWorkingDirectory>

adm/templates/custom.build.bat.in

@@ -11,6 +11,7 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "FREEIMAGE_DIR=@3RDPARTY_FREEIMAGE_DLL_DIRS@"
     set "EGL_DIR=@3RDPARTY_EGL_DLL_DIRS@"
     set "GLES2_DIR=@3RDPARTY_GLES2_DLL_DIRS@"
+    set "GL2PS_DIR=@3RDPARTY_GL2PS_DLL_DIRS@"
     set "TBB_DIR=@3RDPARTY_TBB_DLL_DIR@"
     set "VTK_DIR=@3RDPARTY_VTK_DLL_DIR@"
     set "FFMPEG_DIR=@3RDPARTY_FFMPEG_DLL_DIR@"

adm/templates/custom.build.sh.in

@@ -9,6 +9,7 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TK_DIR="@3RDPARTY_TK_LIBRARY_DIR@"
     export FREETYPE_DIR="@3RDPARTY_FREETYPE_LIBRARY_DIR@"
     export FREEIMAGE_DIR="@3RDPARTY_FREEIMAGE_LIBRARY_DIRS@"
+    export GL2PS_DIR="@3RDPARTY_GL2PS_LIBRARY_DIRS@"
     export TBB_DIR="@3RDPARTY_TBB_LIBRARY_DIR@"
     export VTK_DIR="@3RDPARTY_VTK_LIBRARY_DIR@"
     export FFMPEG_DIR="@3RDPARTY_FFMPEG_LIBRARY_DIR@"

adm/templates/custom.install.bat.in

@@ -13,6 +13,7 @@ if /I "%VCVER%" == "@COMPILER@" (
     set "FREEIMAGE_DIR=@USED_3RDPARTY_FREEIMAGE_DIRS@"
     set "EGL_DIR=@USED_3RDPARTY_EGL_DIRS@"
     set "GLES2_DIR=@USED_3RDPARTY_GLES2_DIRS@"
+    set "GL2PS_DIR=@USED_3RDPARTY_GL2PS_DIRS@"
     set "TBB_DIR=@USED_3RDPARTY_TBB_DIR@"
     set "VTK_DIR=@USED_3RDPARTY_VTK_DIR@"
     set "FFMPEG_DIR=@USED_3RDPARTY_FFMPEG_DIR@"

adm/templates/custom.install.sh.in

@@ -9,6 +9,7 @@ if [ "$1" == "@BIN_LETTER@" ]; then
     export TK_DIR="@USED_3RDPARTY_TK_DIR@"
     export FREETYPE_DIR="@USED_3RDPARTY_FREETYPE_DIR@"
     export FREEIMAGE_DIR="@USED_3RDPARTY_FREEIMAGE_DIRS@"
+    export GL2PS_DIR="@USED_3RDPARTY_GL2PS_DIRS@"
     export TBB_DIR="@USED_3RDPARTY_TBB_DIR@"
     export VTK_DIR="@USED_3RDPARTY_VTK_DIR@"
     export FFMPEG_DIR="@USED_3RDPARTY_FFMPEG_DIR@"

adm/templates/env.bat

@@ -19,6 +19,7 @@ set "HAVE_TBB=false"
 set "HAVE_OPENCL=false"
 set "HAVE_FREEIMAGE=false"
 set "HAVE_FFMPEG=false"
+set "HAVE_GL2PS=false"
 set "HAVE_VTK=false"
 set "HAVE_GLES2=false"
 set "HAVE_D3D=false"
@@ -155,6 +156,7 @@ set "CSF_OPT_CMPL="
 set "PRODUCTS_DEFINES="
 if ["%HAVE_TBB%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_TBB"       & set "CSF_DEFINES=HAVE_TBB;%CSF_DEFINES%"
 if ["%HAVE_OPENCL%"]    == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_OPENCL"    & set "CSF_DEFINES=HAVE_OPENCL;%CSF_DEFINES%"
+if ["%HAVE_GL2PS%"]     == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_GL2PS"     & set "CSF_DEFINES=HAVE_GL2PS;%CSF_DEFINES%"
 if ["%HAVE_FREEIMAGE%"] == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_FREEIMAGE" & set "CSF_DEFINES=HAVE_FREEIMAGE;%CSF_DEFINES%"
 if ["%HAVE_FFMPEG%"]    == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_FFMPEG"    & set "CSF_DEFINES=HAVE_FFMPEG;%CSF_DEFINES%"
 if ["%HAVE_VTK%"]       == ["true"] set "PRODUCTS_DEFINES=%PRODUCTS_DEFINES% -DHAVE_VTK"       & set "CSF_DEFINES=HAVE_VTK;%CSF_DEFINES%"

adm/templates/env.bat.in

@@ -126,6 +126,7 @@ if not ["%FREETYPE_DIR%"] == [""]      set "PATH=%FREETYPE_DIR%;%PATH%"
 if not ["%FREEIMAGE_DIR%"] == [""]     set "PATH=%FREEIMAGE_DIR%;%PATH%"
 if not ["%EGL_DIR%"] == [""]           set "PATH=%EGL_DIR%;%PATH%"
 if not ["%GLES2_DIR%"] == [""]         set "PATH=%GLES2_DIR%;%PATH%"
+if not ["%GL2PS_DIR%"] == [""]         set "PATH=%GL2PS_DIR%;%PATH%"
 if not ["%TBB_DIR%"] == [""]           set "PATH=%TBB_DIR%;%PATH%"
 if not ["%VTK_DIR%"] == [""]           set "PATH=%VTK_DIR%;%PATH%"
 if not ["%FFMPEG_DIR%"] == [""]        set "PATH=%FFMPEG_DIR%;%PATH%"

adm/templates/env.sh

@@ -11,6 +11,7 @@ export HAVE_TBB="false";
 export HAVE_OPENCL="false";
 export HAVE_FREEIMAGE="false";
 export HAVE_FFMPEG="false";
+export HAVE_GL2PS="false";
 export HAVE_VTK="false";
 export HAVE_GLES2="false";
 export HAVE_ZLIB="false";
@@ -95,6 +96,7 @@ if [ "$HAVE_TBB"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -D
 if [ "$HAVE_OPENCL"    == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_OPENCL"; fi
 if [ "$HAVE_FREEIMAGE" == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_FREEIMAGE"; fi
 if [ "$HAVE_FFMPEG"    == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_FFMPEG"; fi
+if [ "$HAVE_GL2PS"     == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_GL2PS"; fi
 if [ "$HAVE_GLES2"     == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_GLES2"; fi
 if [ "$HAVE_VTK"       == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_VTK"; fi
 if [ "$HAVE_ZLIB"      == "true" ]; then export CSF_OPT_CMPL="${CSF_OPT_CMPL} -DHAVE_ZLIB"; fi

adm/templates/env.sh.in

@@ -57,6 +57,10 @@ if [ "$FREEIMAGE_DIR" != "" ]; then
   THRDPARTY_PATH="${FREEIMAGE_DIR}:${THRDPARTY_PATH}"
 fi
 
+if [ "$GL2PS_DIR" != "" ]; then
+  THRDPARTY_PATH="${GL2PS_DIR}:${THRDPARTY_PATH}"
+fi
+
 if [ "$TBB_DIR" != "" ]; then
   THRDPARTY_PATH="${TBB_DIR}:${THRDPARTY_PATH}"
 fi

adm/templates/sample.bat

@@ -16,16 +16,11 @@ if ["%1"] == [""] (
   echo    HLR
   echo    Animation
   echo    Convert
-  echo    AndroidQt
-  echo    FuncDemo
-  echo    IESample
-  echo    Tutorial
   PAUSE
   exit /B
 )
 
 call "%~dp0env.bat" %2 %3 %4
-if not ["%QTDIR%"] == [""] if exist "%QTDIR%\qml" if ["%QML2_IMPORT_PATH%"] == [""] set "QML2_IMPORT_PATH=%QTDIR%/qml"
 set "EXE_PATH=%CSF_OCCTBinPath%/%1.exe"
 
 if not exist "%EXE_PATH%" (

adm/templates/sample.sh

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-if [ "$1" == "" ]; then
-  echo Launch selected sample as follows:
-  echo   sample.sh SampleName d
-  echo or to use last sample build configuration:
-  echo   sample.sh SampleName
-  echo available samples:
-  echo    FuncDemo
-  echo    IESample
-  echo    Tutorial
-fi
-
-
-aCurrentPath="$PWD"
-aScriptPath=${BASH_SOURCE%/*}; if [ -d "${aScriptPath}" ]; then cd "$aScriptPath"; fi; aScriptPath="$PWD";
-
-source "${aScriptPath}/env.sh" "$2"
-
-if test "${QTDIR}" == ""; then
-  if [ -d "$QTDIR%\qml" ];
-    then export QML2_IMPORT_PATH="$QTDIR\qml";
-  fi
-fi
-
-export "EXE_PATH=$CSF_OCCTBinPath/$1"
-
-if [ ! -f "$EXE_PATH" ]; then
-  echo "Executable \"$EXE_PATH\" not found."
-  echo "Probably you didn't compile the application."
-  exit 1
-fi
-
-cd ${aCurrentPath}
-"$EXE_PATH"

adm/templates/template.vc10

@@ -90,7 +90,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -107,7 +107,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
@@ -138,7 +138,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -156,7 +156,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
@@ -186,7 +186,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -203,7 +203,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
@@ -234,7 +234,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__TKNAM__/</AssemblerListingLocation>
@@ -252,7 +252,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>

adm/templates/template.vc10x

@@ -85,7 +85,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -100,7 +100,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
@@ -130,7 +130,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win32\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -146,7 +146,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
@@ -175,7 +175,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>MaxSpeed</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
@@ -190,7 +190,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>
@@ -219,7 +219,7 @@
       <MultiProcessorCompilation>true</MultiProcessorCompilation>
       <Optimization>Disabled</Optimization>
       <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
-      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <ExceptionHandling>Async</ExceptionHandling>
       <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
       <AssemblerListingLocation>.\..\..\..\win64\__VCVER__\objd\__XQTNAM__/</AssemblerListingLocation>
@@ -235,7 +235,7 @@
     </ClCompile>
     <ResourceCompile>
       <AdditionalIncludeDirectories>..\..\..\inc;$(CSF_OPT_INC);%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES);%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>_DEBUG;$(CSF_DEFINES)__TKDEFS__;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ResourceCompile>
     <Link>
       <AdditionalDependencies>__TKDEP__;%(AdditionalDependencies)</AdditionalDependencies>

adm/templates/template.vc7

@@ -22,7 +22,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="TRUE"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="TRUE"
@@ -62,7 +62,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
@@ -89,7 +89,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
 				PrecompiledHeaderFile=".\..\..\..\win32\vc7\objd\__TKNAM__\__TKNAM__.pch"
@@ -131,7 +131,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>

adm/templates/template.vc7x

@@ -22,7 +22,7 @@
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
 				AssemblerListingLocation=".\..\..\..\win32\vc7\objd\__XQTNAM__/"
@@ -61,7 +61,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>
@@ -86,7 +86,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="TRUE"
 				RuntimeLibrary="2"
 				EnableFunctionLevelLinking="TRUE"
@@ -124,7 +124,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"/>
 			<Tool
 				Name="VCWebServiceProxyGeneratorTool"/>

adm/templates/template.vc8

@@ -50,7 +50,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -70,7 +70,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool
@@ -148,7 +148,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -170,7 +170,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool
@@ -249,7 +249,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -268,7 +268,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool
@@ -347,7 +347,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -368,7 +368,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1036"
 			/>
 			<Tool

adm/templates/template.vc8x

@@ -49,7 +49,7 @@
 				Name="VCCLCompilerTool"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -68,7 +68,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES);"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__;"
 				Culture="1033"
 			/>
 			<Tool
@@ -145,7 +145,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES);"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__;"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -164,7 +164,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES);"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__;"
 				Culture="1033"
 			/>
 			<Tool
@@ -240,7 +240,7 @@
 				AdditionalOptions="/favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -258,7 +258,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"
 			/>
 			<Tool
@@ -337,7 +337,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -355,7 +355,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 				Culture="1033"
 			/>
 			<Tool

adm/templates/template.vc9

@@ -53,7 +53,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -73,7 +73,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -150,7 +150,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -172,7 +172,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -248,7 +248,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -267,7 +267,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -342,7 +342,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -363,7 +363,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"

adm/templates/template.vc9x

@@ -52,7 +52,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -71,7 +71,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -143,7 +143,7 @@
 				AdditionalOptions="-MP"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -162,7 +162,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -236,7 +236,7 @@
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="2"
 				InlineFunctionExpansion="1"
-				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				StringPooling="true"
 				ExceptionHandling="2"
 				RuntimeLibrary="2"
@@ -254,7 +254,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)"
+				PreprocessorDefinitions="NDEBUG;No_Exception;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"
@@ -327,7 +327,7 @@
 				AdditionalOptions="-MP -favor:blend"
 				AdditionalIncludeDirectories="__TKINC__;$(CSF_OPT_INC)"
 				Optimization="0"
-				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;_CRT_SECURE_NO_WARNINGS;_CRT_NONSTDC_NO_DEPRECATE;$(CSF_DEFINES)__TKDEFS__"
 				ExceptionHandling="2"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="3"
@@ -345,7 +345,7 @@
 			<Tool
 				Name="VCResourceCompilerTool"
 				AdditionalIncludeDirectories="..\..\..\inc;$(CSF_OPT_INC)"
-				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)"
+				PreprocessorDefinitions="_DEBUG;$(CSF_DEFINES)__TKDEFS__"
 			/>
 			<Tool
 				Name="VCPreLinkEventTool"

adm/upgrade.dat

@@ -1,76 +1,8 @@
 [rename]
-Adaptor3d_OffsetCurve Adaptor2d_OffsetCurve
 BRepExtrema_OverlappedSubShapes BRepExtrema_MapOfIntegerPackedMapOfInteger
 ShapeConstruct_CompBezierCurves2dToBSplineCurve2d Convert_CompBezierCurves2dToBSplineCurve2d
 ShapeConstruct_CompBezierCurves2dToBSplineCurve Convert_CompBezierCurves2dToBSplineCurve
 Image_PixMap::Img Image_Format_
-V3d_TypeOfShadingModel Graphic3d_TypeOfShadingModel
-Graphic3d_TOSM_NONE Graphic3d_TOSM_UNLIT
-V3d_COLOR Graphic3d_TOSM_UNLIT
-V3d_FLAT Graphic3d_TOSM_FACET
-V3d_GOURAUD Graphic3d_TOSM_VERTEX
-V3d_PHONG Graphic3d_TOSM_FRAGMENT
-V3d_TypeOfLight Graphic3d_TypeOfLightSource
-V3d_AMBIENT Graphic3d_TOLS_AMBIENT
-V3d_DIRECTIONAL Graphic3d_TOLS_DIRECTIONAL
-V3d_POSITIONAL Graphic3d_TOLS_POSITIONAL
-V3d_SPOT Graphic3d_TOLS_SPOT
-BOPCol_BaseAllocator Handle(NCollection_BaseAllocator)
-BOPCol_BoxBndTree is replaced with BOPTools_BoxBndTree
-BOPCol_DataMapOfIntegerInteger TColStd_DataMapOfIntegerInteger
-BOPCol_DataMapOfIntegerListOfInteger TColStd_DataMapOfIntegerListOfInteger
-BOPCol_DataMapOfIntegerListOfShape TopTools_DataMapOfIntegerListOfShape
-BOPCol_DataMapOfIntegerReal TColStd_DataMapOfIntegerReal
-BOPCol_DataMapOfIntegerShape TopTools_DataMapOfIntegerShape
-BOPCol_DataMapOfShapeBox TopTools_DataMapOfShapeBox
-BOPCol_DataMapOfShapeInteger TopTools_DataMapOfShapeInteger
-BOPCol_DataMapOfShapeListOfShape TopTools_DataMapOfShapeListOfShape
-BOPCol_DataMapOfShapeReal TopTools_DataMapOfShapeReal
-BOPCol_DataMapOfShapeShape TopTools_DataMapOfShapeShape
-BOPCol_IndexedDataMapOfShapeListOfShape TopTools_IndexedDataMapOfShapeListOfShape
-BOPCol_IndexedDataMapOfShapeShape TopTools_IndexedDataMapOfShapeShape
-BOPCol_IndexedMapOfInteger TColStd_IndexedMapOfInteger
-BOPCol_IndexedMapOfOrientedShape TopTools_IndexedMapOfOrientedShape
-BOPCol_IndexedMapOfShape TopTools_IndexedMapOfShape
-BOPCol_ListOfInteger TColStd_ListOfInteger
-BOPCol_ListOfListOfShape TopTools_ListOfListOfShape
-BOPCol_ListOfShape TopTools_ListOfShape
-BOPCol_MapOfInteger TColStd_MapOfInteger
-BOPCol_MapOfOrientedShapeTopTools_MapOfOrientedShape
-BOPCol_MapOfShape TopTools_MapOfShape
-BOPCol_SequenceOfPnt2d TColgp_SequenceOfPnt2d
-BOPCol_SequenceOfReal TColStd_SequenceOfReal
-BOPCol_SequenceOfShape TopTools_SequenceOfShape 
-BOPCol_Parallel BOPTools_Parallel
-BOPCol_NCVector NCollection_Vector
-BOPCol_DataMapOfShapeAddress DataMapOfShapeAddress
-BOPCol_DataMapOfTransientAddress DataMapOfTransientAddress
-BOPCol_DataMapIteratorOfDataMapOfIntegerReal TColStd_DataMapIteratorOfDataMapOfIntegerReal
-BOPCol_DataMapIteratorOfDataMapOfShapeAddress DataMapOfShapeAddress::Iterator
-BOPCol_DataMapIteratorOfDataMapOfTransientAddress DataMapOfTransientAddress::Iterator
-BOPCol_ListIteratorOfListOfInteger TColStd_ListIteratorOfListOfInteger
-BOPCol_ListIteratorOfListOfShape TopTools_ListIteratorOfListOfShape
-BOPCol_MapIteratorOfMapOfInteger TColStd_MapIteratorOfMapOfInteger
-BOPCol_BoxBndTreeSelector BOPTools_BoxBndTreeSelector
-BOPCol_BoxBndTree BOPTools_BoxBndTree
-BOPCol_PListOfInteger TColStd_ListOfInteger*
-BOPCol_IndexedDataMapOfShapeReal TopTools_IndexedDataMapOfShapeReal
-BOPCol_MapOfOrientedShape TopTools_MapOfOrientedShape
-BOPCol_DataMapIteratorOfDataMapOfIntegerInteger TColStd_DataMapIteratorOfDataMapOfIntegerInteger
-BOPCol_MapIteratorOfMapOfShape TopTools_MapIteratorOfMapOfShape
-BOPCol_ContextFunctor BOPTools_ContextFunctor
-BOPCol_ContextCnt BOPTools_ContextCnt
-BOPCol_Functor BOPTools_Functor
-BOPCol_Cnt BOPTools_Cnt
-BOPCol_DataMapIteratorOfDataMapOfIntegerListOfShape TopTools_DataMapIteratorOfDataMapOfIntegerListOfShape
-BOPCol_MapIteratorOfMapOfOrientedShape TopTools_MapIteratorOfMapOfOrientedShape
-BOPCol_DataMapIteratorOfDataMapOfIntegerListOfInteger TColStd_DataMapIteratorOfDataMapOfIntegerListOfInteger
-BOPCol_DataMapIteratorOfDataMapOfShapeShape TopTools_DataMapIteratorOfDataMapOfShapeShape
-BOPTools::MapShapes TopExp::MapShapes
-BOPTools::MapShapesAndAncestors TopExp::MapShapesAndAncestors
-BOPCol_Box2DBndTreeSelector BOPTools_BoxSelector<Bnd_Box2d>
-BiTgte_DataMapOfShapeBox TopTools_DataMapOfShapeBox
-CDM_MessageDriver Message_Messenger
 
 [tcollection]
 AdvApp2Var_SequenceOfNode

dox/dev_guides/building/3rdparty/3rdparty_linux.md

@@ -19,6 +19,7 @@ There are two types of third-party products, which are  necessary to build OCCT:
 	* FreeType 2.4.10 - 2.5.3;
 * Optional  products: 
 	* TBB 3.x - 4.x;
+	* gl2ps 1.3.5 - 1.3.8;
 	* FreeImage 3.14.1 - 3.16.0;
 	* VTK 6.1.0.
 
@@ -107,6 +108,32 @@ This third-party product is  installed with binaries from the archive that can b
 Go to the **Download** page, find the  release version you need and pick the archive for Linux platform.
 To install, unpack the downloaded archive of TBB product.
 
+@subsection dev_guides__building_3rdparty_linux_3_2 gl2ps
+
+Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.
+  
+1. Install or build *cmake* product from the source file. 
+2. Start *cmake* in GUI mode with the directory where the source files of gl2ps are located:
+
+       ccmake GL2PS_SRC_DIR   
+
+   * Press <i>[c]</i> to make the  initial configuration; 
+   * Define the necessary options in *CMAKE_INSTALL_PREFIX* 
+   * Press <i>[c]</i> to make the final  configuration 
+   * Press <i>[g]</i> to generate  Makefile and exit 
+
+   or just run the following command: 
+
+       cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
+
+3. Start the building of gl2ps: 
+
+       make   
+
+4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option. 
+
+       make install   
+
 @subsection dev_guides__building_3rdparty_linux_3_3 FreeImage
 
 Download the necessary archive from http://sourceforge.net/projects/freeimage/files/Source%20Distribution/
@@ -194,7 +221,7 @@ Download the necessary archive from http://www.vtk.org/VTK/resources/software.ht
 
        make
 
-4. Start the installation of VTK. Binaries will be installed according to the *VTK_INSTALL_PREFIX* option.
+4. Start the installation of gl2ps. Binaries will be  installed according to the *VTK_INSTALL_PREFIX* option.
 
        make install
 
@@ -205,7 +232,7 @@ Download the necessary archive from http://www.vtk.org/VTK/resources/software.ht
 All 3rd-party products required for building of  OCCT could be installed
 from official repositories. You may install them from  console using apt-get utility:
 
-    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libxt-dev libxmu-dev libxi-dev libgl1-mesa-dev libglu1-mesa-dev libfreeimage-dev libtbb-dev
+    sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libxt-dev libxmu-dev libxi-dev libgl1-mesa-dev libglu1-mesa-dev libfreeimage-dev libtbb-dev libgl2ps-dev
 
 To launch binaries built with WOK you need to install C shell and 32-bit libraries on x86_64 distributives:
 

dox/dev_guides/building/3rdparty/3rdparty_osx.md

@@ -17,6 +17,7 @@ There are two types of third-party products, which are  necessary to build OCCT:
 	* FreeType 2.4.10 - 2.5.3.
 * Optional  products: 
 	* TBB 3.x - 4.x;
+	* gl2ps  1.3.5 - 1.3.8;
 	* FreeImage 3.14.1 - 3.16.0
   
 @section dev_guides__building_3rdparty_osx_2 Building Mandatory Third-party Products
@@ -105,6 +106,33 @@ Go to the **Download** page, find the release version you need (e.g. *tbb30_018o
 and  pick the archive for Mac OS X platform. 
 To install, unpack the downloaded archive of TBB 3.0 product (*tbb30_018oss_osx.tgz*).
 
+@subsection dev_guides__building_3rdparty_osx_3_2 gl2ps 1.3.5
+
+Download the necessary archive from http://geuz.org/gl2ps/ and unpack it. 
+
+1. Install or build cmake product from the source file. 
+
+2. Start cmake in GUI mode with the directory, where the source  files of *fl2ps* are located: 
+
+       ccmake GL2PS_SRC_DIR   
+
+   * Press <i>[c]</i> to make the  initial configuration; 
+   * Define the necessary options in *CMAKE_INSTALL_PREFIX*; 
+   * Press <i>[c]</i> to make the final  configuration; 
+   * Press <i>[g]</i> to generate  Makefile and exit. 
+
+   or just run the following command: 
+
+       cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
+
+3. Start the building of gl2ps 
+
+       make   
+
+4. Start the installation of gl2ps. Binaries will be  installed according to the *CMAKE_INSTALL_PREFIX* option 
+
+       make install   
+
 @subsection dev_guides__building_3rdparty_osx_3_3 FreeImage 3.14.1 or 3.15.x
 
 Download the necessary archive from 

dox/dev_guides/building/3rdparty/3rdparty_windows.md

@@ -17,6 +17,7 @@ There are two types of third-party products used  by OCCT:
 	* FreeType 2.4.10 -- 2.5.3.
 * Optional  products:
 	* TBB 3.x -- 4.x;
+	* gl2ps 1.3.5 -- 1.3.8;
 	* FreeImage 3.14.1 -- 3.16.0;
 	* VTK 6.1.0.
 
@@ -155,6 +156,85 @@ Unpack the downloaded  archive of TBB product into the *3rdparty* folder.
 
 Further in this document,  this folder is referred to as *tbb*. 
 
+@subsection dev_guides__building_3rdparty_win_3_2  gl2ps
+
+This third-party product should be built as a dynamically loadable library (dll file). 
+You can download its sources from  http://geuz.org/gl2ps/src/. 
+
+### The building procedure
+
+1. Unpack the downloaded  archive of gl2ps product (e.g. *gl2ps-1.3.5.tgz*) into the *3rdparty*  folder. 
+
+   As a result, you will get a folder named, for example, *3rdparty\\gl2ps-1.3.5-source*. 
+
+   Rename it into <i>gl2ps-platform-compiler-building mode</i>, where 
+   * **platform** -- *win32*  or *win64*; 
+   * **compiler** -- *vc8*, *vc9* or *vc10*; 
+   * **building mode** -- *opt*  (for release) or *deb* (for debug). 
+   
+   For example, <i>gl2ps-win64-vc10-deb</i>
+
+   Further in this document,  this folder is referred to as *gl2ps*. 
+
+2. Download (from http://www.cmake.org/cmake/resources/software.html) 
+   and install the *CMake* build system.  
+
+3. Edit the file *gl2ps\\CMakeLists.txt*. 
+
+   After line 113 in *CMakeLists.txt*: 
+
+       set_target_properties(shared PROPERTIES  COMPILE_FLAGS \"-DGL2PSDLL -DGL2PSDLL_EXPORTS\")
+    
+   add the following line:   
+    
+       add_definitions(-D_USE_MATH_DEFINES)  
+
+   Attention: If Cygwin was installed on  your computer, make sure that there is no path to it in the *PATH* variable to avoid possible conflicts during the configuration. 
+
+4. Launch CMake <i>(cmake-gui.exe)</i> using  the Program menu. 
+
+   In CMake: 
+  
+   * Define where the source code is. 
+     This path must point to *gl2ps*  folder. 
+
+   * Define where to build the  binaries. 
+     This path must point to the folder where generated gl2ps project binaries will be placed 
+     (for example, *gl2ps\\bin*). 
+     Further in this document, this folder is referred to as *gl2ps_bin*.
+
+   * Press  **Configure** button. 
+   
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image004.png}
+
+   * Select the generator (the compiler  and the target platform -- 32 or 64 bit) in the pop-up window. 
+   
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image005.png}
+
+   * Press **Finish** button to  return to the main CMake window. 
+     Expand the ENABLE group and uncheck  ENABLE_PNG and ENABLE_ZLIB check boxes. 
+	 
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image006.png}
+
+   * Expand the CMAKE group and define *CMAKE_INSTALL_PREFIX* which is the path where you want to install the build results, for example, *c:\\occ3rdparty\\gl2ps-1.3.5*. 
+   
+     @figure{/dev_guides/building/3rdparty/images/3rdparty_image007.png}
+
+   * Press **Configure** button again, then press **Generate** button to generate Visual Studio projects. After completion, close CMake application. 
+
+5. Open the solution file *gl2ps_bin\\gl2ps.sln* in Visual Studio. 
+
+   * Select a configuration to build 
+     * Choose **Release** to build Release binaries. 
+     * Choose **Debug** to build Debug binaries. 
+   * Select a platform to build. 
+     * Choose **Win32** to build for a 32 bit platform. 
+     * Choose **x64** to build for a 64 bit platform. 
+   * Build the solution. 
+   * Build the *INSTALL* project. 
+    
+As a  result, you should have the installed gl2ps product in the *CMAKE_INSTALL_PREFIX* path. 
+
 @subsection dev_guides__building_3rdparty_win_3_3 FreeImage
 
 This third-party product should be built as a dynamically loadable library (.dll file). 

dox/dev_guides/building/cmake/cmake.md

@@ -82,20 +82,21 @@ The following table gives the full list of environment variables used at the con
 |----------|------|---------|
 | CMAKE_BUILD_TYPE | String | Specifies the build type on single-configuration generators (such as make).  Possible values are Debug, Release and RelWithDebInfo |
 | USE_FREEIMAGE | Boolean flag | Indicates whether FreeImage product should be used in OCCT visualization module for support of popular graphics image formats (PNG, BMP, etc.) |
+| USE_GL2PS | Boolean flag | Indicates whether GL2PS product should be used in OCCT visualization module for support of vector image formats (PS, EPS, etc.) |
 | USE_TBB | Boolean flag | Indicates whether TBB 3rd party is used or not. TBB stands for Threading Building Blocks, the technology of Intel Corp, which comes with different mechanisms and patterns for injecting parallelism into your application. OCCT remains parallel even without TBB product |
 | USE_VTK | Boolean flag | Indicates whether VTK 3rd party is used or not. VTK stands for Visualization ToolKit, the technology of Kitware Inc intended for general-purpose scientific visualization. OCCT comes with a bridge between CAD data representation and VTK by means of its dedicated VIS component (VTK Integration Services). You may skip this 3rd party unless you are planning to use VTK visualization for OCCT geometry. See the official documentation @ref occt_user_guides__vis for the details on VIS |
 | 3RDPARTY_DIR | Path | Defines the root directory where all required 3rd party products will be searched. Once you define this path it is very convenient to click "Configure" button in order to let CMake automatically detect all necessary products|
 | 3RDPARTY_FREETYPE_* | Path | Path to Freetype binaries |
 | 3RDPARTY_TCL_* 3RDPARTY_TK_* | Path | Path to Tcl/Tk binaries |
 | 3RDPARTY_FREEIMAGE* | Path | Path to Freeimage binaries |
+| 3RDPARTY_GL2PS_* | Path | Path to GL2PS binaries |
 | 3RDPARTY_TBB* | Path | Path to TBB binaries |
 | 3RDPARTY_VTK_* | Path | Path to VTK binaries |
 | BUILD_MODULE_<MODULE>| Boolean flag | Indicates whether the corresponding OCCT module should be built or not. It should be noted that some toolkits of a module can be built even if this module is not checked (this happens if some other modules depend on these toolkits). The main modules and their descriptions can be found in @ref user_guides |
-| BUILD_LIBRARY_TYPE | String |  Specifies the type of library to be created. "Shared" libraries are linked dynamically and loaded at runtime. "Static" libraries are archives of object files used when linking other targets. Note that Draw Harness plugin system is incompatible with "Static" builds, and therefore it is disabled for these builds.|
+| BUILD_LIBRARY_TYPE | String |  Specifies the type of library to be created. "Shared" libraries are linked dynamically and loaded at runtime. "Static" libraries are archives of object files used when linking other targets. Note that Draw Harness plugin system is incompatible with "Static" builds, and therefore it should be excluded. Using "Static" libraries also might require modification in building procedures of user application (and OCCT samples); on Windows platform, user application should define HAVE_NO_DLL.  |
 | BUILD_ADDITIONAL_TOOLKITS | String | Semicolon-separated individual toolkits to include into build process. If you want to build some particular libraries (toolkits) only, then you may uncheck all modules in the corresponding *BUILD_MODUE_\<MODULE\>* options and provide the list of necessary libraries here. Of course, all dependencies will be resolved automatically |
 | BUILD_YACCLEX | Boolean flag | Enables Flex/Bison lexical analyzers. OCCT source files relating to STEP reader and ExprIntrp functionality are generated automatically with Flex/Bison. Checking this option leads to automatic search of Flex/Bison binaries and regeneration of the mentioned files |
-| BUILD_SAMPLES_MFC | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
-| BUILD_SAMPLES_QT | Boolean flag | Indicates whether QT samples should be built together with OCCT. |
+| BUILD_MODULE_MfcSamples | Boolean flag | Indicates whether MFC samples should be built together with OCCT. This option is only relevant to Windows platforms |
 | BUILD_Inspector | Boolean flag | Indicates whether Inspector should be built together with OCCT. |
 | BUILD_DOC_Overview | Boolean flag | Indicates whether OCCT overview documentation project should be created together with OCCT. It is not built together with OCCT. Checking this option leads to automatic search of Doxygen binaries. Its building calls Doxygen command to generate the documentation in HTML format |
 | BUILD_PATCH | Path | Points to the directory recognized as a "patch" for OCCT. If specified, the files from this directory take precedence over the corresponding native OCCT sources. This way you are able to introduce patches to Open CASCADE Technology not affecting the original source distribution |
@@ -115,6 +116,7 @@ The following table gives the full list of environment variables used at the con
 | INSTALL_DIR_DOC | Path | Relative path to the documentation installation directory (absolute path is ${INSTALL_DIR}/${INSTALL_DIR_DOC}) |
 | INSTALL_FREETYPE | Boolean flag | Indicates whether Freetype binaries should be installed into the installation directory |
 | INSTALL_FREEIMAGE* | Boolean flag | Indicates whether Freeimage binaries should be installed into the installation directory |
+| INSTALL_GL2PS | Boolean flag | Indicates whether GL2PS binaries should be installed into the installation directory |
 | INSTALL_TBB | Boolean flag | Indicates whether TBB binaries should be installed into the installation directory |
 | INSTALL_VTK | Boolean flag | Indicates whether VTK binaries should be installed into the installation directory |
 | INSTALL_TCL | Boolean flag | Indicates whether TCL binaries should be installed into the installation directory |

dox/dev_guides/building/code_blocks.md

@@ -26,7 +26,7 @@ The environment is defined in the file *custom.sh* (on Linux and OS X) or *custo
   * "HardLink* - hard links to headers located in *src* will be created.
 * For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
 ~~~~~
-       export HAVE_FREEIMAGE=false
+       export HAVE_GL2PS=false
 ~~~~~
 
 Alternatively, or when *custom.sh* or *custom.bat* does not exist, you can launch **genconf** tool to configure environment interactively:

dox/dev_guides/building/xcode.md

@@ -27,7 +27,7 @@ The environment is defined in the file *custom.sh* which can be edited directly:
   * "HardLink* - hard links to headers located in *src* will be created.
 * For optional  third-party libraries, set corresponding environment variable <i>HAVE_<LIBRARY_NAME></i> to either *false*,  e.g.:
 ~~~~~
-       export HAVE_FREEIMAGE=false
+       export HAVE_GL2PS=false
 ~~~~~
 
 Alternatively, or when *custom.sh* does not exist, you can launch *genconf.sh* to configure environment interactively:
@@ -49,13 +49,6 @@ For instance, in Terminal application:
   $ ./genproj
 ~~~~~
 
-Option **-static** can be used with XCode to build static libraries.
-
-~~~~~
-  $ cd /dev/OCCT/opencascade-7.0.0
-  $ ./genproj xcd -static
-~~~~~
-
 @section build_xcode_build Building
 
 To start **Xcode**, launch script *xcode.sh*.

dox/dev_guides/git_guide/git_guide.md

@@ -140,7 +140,7 @@ The official repository contains:
   @figure{OCCT_GitGuide_V2_image006.png,"",320}
 
   Optionally, you can set up TortoiseGit to use visual diff utility for SVG images used in OCCT documentation.
-  For that, click on item "Diff Viewer" in the Settings dialog, then click button "Advanced..." in the right tab to add a new record with the following parameters:
+  For that, click on item "Diff Viewer" in the Settings dialog, then click button "Advanced..." on the right tab add new record with the following parameters:
   - Extension: <code>.svg</code>
   - External program: <code>&lt;path_to_OCCT&gt;\\adm\\svgdiff.bat %%base %%mine %%bname %%yname</code>
 

dox/dev_guides/tests/tests.md

@@ -193,9 +193,9 @@ Use prefix <i>bug</i> followed by Mantis issue ID and, if necessary, additional
 	*	To check expected output which should be obtained as the test result, add @ref testmanual_3_7 "REQUIRED" statement for each line of output to mark it as required.
 	*	If the test case produces error messages (contained in parse.rules), which are expected in that test and should not be considered as its failure (e.g. test for *checkshape* command), add REQUIRED statement for each error to mark it as required output.
 4.	To check whether the data files needed for the test are already present in the database, use DRAW command *testfile* (see below).
-    If the data file is already present, use it for a new test instead of adding a duplicate.
-    If the data file(s) are not yet present in the test database, put them to a folder and add it to the environment variable *CSF_TestDataPath* to be found by the test system.
-    The location of the data files, which need to be accessed by OCC team and put to the official database, should be provided in the comment to Mantis issue, clearly indicating how the names of the files used by the test script match the actual names of the files.
+    If the data file is already present, use it for new test instead of adding a duplicate.
+    If the data file(s) are not yet present in the test database, put them to some folder and add it to the environment variable *CSF_TestDataPath* to be found by the test system.
+    Information on where the data files can be accessed by OCC team for putting to official database should be provided in comment to Mantis issue, clearly indicating how names of the files used by the test script match the actual names of the files.
     The simplest way is to attach the data files to the Mantis issue, with the same names as used by the test script.
 5.	Check that the test case runs as expected (test for fix: OK with the fix, FAILED without the fix; test for existing problem: BAD), and integrate it to the Git branch created for the issue.
 
@@ -222,8 +222,8 @@ fixshape result a 0.01 0.01
 checkshape result
 ~~~~~
 
-DRAW command *testfile* should be used to check the data files used by the test for possible duplication of content or names.
-The command accepts the list of paths to files to be checked (as a single argument) and gives a conclusion on each of the files, for instance:
+DRAW command testfile should be used to check the data files being used by the test for possible duplication of content or names.
+The command accepts list of paths to files being checked as single argument, and will give conclusion on each of the files, for instance:
 
 ~~~~~
 Draw[1]> testfile [glob /my/data/path/bug12345*]

dox/dev_guides/upgrade/upgrade.md

@@ -791,7 +791,6 @@ std::stable_sort (aValues.begin(), aValues.end());
 
 The old mechanism for rendering Underlay and Overlay on-screen 2D objects based on *Visual3d_Layer* and immediate drawing model (uncached and thus slow) has been removed.
 Classes *Aspect_Clayer2d, OpenGl_GraphicDriver_Layer, Visual3d_Layer, Visual3d_LayerItem, V3d_LayerMgr* and *V3d_LayerMgrPointer* have been deleted.
-The following auxiliary definition have been removed as well: Aspect_TypeOfPrimitive, Aspect_TypeOfLayer, Aspect_TypeOfEdge, Aspect_TypeOfDrawMode, Aspect_TypeOfConstraint, Aspect_DriverDefinitionError, Aspect_BadAccess.
 
 General AIS interactive objects with transformation persistence flag *Graphic3d_TMF_2d* can be used as a replacement of *Visual3d_LayerItem*.
 The anchor point specified for transformation persistence defines the window corner of  (or center in case of (0, 0) point).
@@ -1503,97 +1502,52 @@ The following obsolete features have been removed:
 * The container *BiTgte_DataMapOfShapeBox* is replaced with *TopTools_DataMapOfShapeBox*;
 * The class *BOPTools* has been removed as duplicate of the class *TopExp*;
 * The method *BOPAlgo_Builder::Splits()* has been removed as excessive. The method *BOPAlgo_Builder::Images()* can be used instead.
-* The method *BOPTools_AlgoTools::CheckSameGeom()* has been removed as excessive. The method *BOPTools_AlgoTools::AreFacesSameDomain()* can be used instead.
 
 @section upgrade_occt730 Upgrade to OCCT 7.3.0
 
 @subsection upgrade_730_lights Light sources
 
-Multiple changes have been applied to lights management within *TKV3d* and *TKOpenGl*:
-* *V3d_Light* class is now an alias to *Graphic3d_CLight*.
-  *Graphic3d_CLight* is now a Handle class with refactored methods for managing light source parameters.
-  Most methods of *V3d_Light* sub-classes have been preserved to simplify porting.
-* Obsolete debugging functionality for drawing a light source has been removed from *V3d_Light*.
-  Methods and constructors that take parameters for debug display and do not affect the light definition itself have also been removed.
-* Light constructors taking *V3d_Viewer* have been marked as deprecated.
-  Use method *AddLight()* of the class *V3d_Viewer* or *V3d_View* to add new light sources to a scene or a single view, respectively.
+Multiple changes have been applied to lights management within TKV3d and TKOpenGl:
+* V3d_Light class is now an alias to Graphic3d_CLight.
+  Graphic3d_CLight is now a Handle class with refactored methods for managing light source parameters
+  (preserving most methods of V3d_Light sub-classes to simplify porting).
+* Obsolete debugging functionality for drawing lights source has been removed from V3d_Light.
+  Methods and constructors taking parameters for this drawing and not affecting light definition itself has been also removed.
+* Light constructors taking V3d_Viewer has been marked deprecated.
+  Application may call V3d_Viewer::AddLight() explicitly to register new light sources created by new constructors within V3d_Viewer, but this step is now optional.
 * The upper limit of 8 light sources has been removed.
-* The classes for specific light source types: *V3d_AmbientLight, V3d_DirectionalLight, V3d_PositionalLight* and *V3d_SpotLight* have been preserved, but it is now possible to define the light of any type by creating base class *Graphic3d_CLight* directly. The specific classes only hide unrelated light properties depending on the type of light source.
-* It is no more required to call *V3d_Viewer::UpdateLights()* after modifying the properties of light sources (color, position, etc.)
+* Dedicated classes per light source type V3d_AmbientLight, V3d_DirectionalLight, V3d_PositionalLight and V3d_SpotLight have been preserved,
+  but it is now possible defining light of any type by creating base class Graphic3d_CLight directly.
+  Dedicated classes only hides visibility of unrelated light properties depending on its type.
+* Calling V3d_Viewer::UpdateLights() is no more required after modifying light sources properties (color, position, etc.).
 
 @subsection upgrade_730_shadingmodels Shading Models
 
-*Graphic3d_AspectFillArea3d* has been extended by a new property *ShadingModel()*, which previously has been defined globally for the entire View.
+*Graphic3d_AspectFillArea3d* has been extended by a new property ::ShadingModel(), which previously has been defined globally for entire View.
 
-Previously, a triangle array without normal vertex attributes was implicitly considered as unshaded,
+Previously, triangle array without normal vertex attributes was implicitly considered as unshaded,
 but now such array will be shaded using *Graphic3d_TOSM_FACET* model (e.g. by computing per-triangle normals).
-Therefore, *Graphic3d_TOSM_UNLIT* should be explicitly specified to disable shading of triangles array.
-Alternatively, a material without reflectance properties can be used to disable shading (as before).
+Therefore, *Graphic3d_TOSM_UNLIT* should be explicitly specified for disabling shading or triangles array.
+Alternatively, material without reflectance properties can be used for disabling shading as before.
 
 @subsection upgrade_730_tkopengl Custom low-level OpenGL elements
 
-The following API changes should be considered while porting custom *OpenGl_Element* objects:
-* *OpenGl_ShaderManager::BindFaceProgram()*, *BindLineProgram()*, *BindMarkerProgram()* now take enumeration arguments instead of Boolean flags.
+The following API changes should be considered while porting custom OpenGl_Element objects:
+* OpenGl_ShaderManager::BindFaceProgram(), ::BindLineProgram(), ::BindMarkerProgram() now takes enumeration arguments instead of Boolean flags.
 
 @subsection upgrade_730_BOPAlgo_Section Changes in BOPAlgo_Section
 
-The public method *BuildSection()* in the class *BOPAlgo_Section* has become protected. The methods *Perform()* or *PerformWithFiller()* should be called for construction of the result of SECTION operation.
+The public method *BuildSection()* in the class *BOPAlgo_Section* has became protected. The methods *Perform()* or *PerformWithFiller()* should be called for construction of the result of SECTION operation.
 
 @subsection upgrade_730_BRepAdaptor_CompCurve Changes in BRepAdaptor_CompCurve
 
-The method *BRepAdaptor_CompCurve::SetPeriodic* has been eliminated.
-Since the new version, the method *BRepAdaptor_CompCurve::IsPeriodic()* will always return FALSE. Earlier, it could return TRUE in case if the wire contained only one edge based on a periodic curve. 
+The method BRepAdaptor_CompCurve::SetPeriodic has been eliminated.
+Since new version, the method BRepAdaptor_CompCurve::IsPeriodic() will always return FALSE. Earlier, it could return TRUE in case if the wire contained only one edge based on periodic curve. 
 
 @subsection upgrade_730_removed Removed features
-* The methods *SetDeflection*, *SetEpsilonT*, *SetDiscretize* of the class *IntTools_EdgeFace* have been removed as redundant.
-* Deprecated functionality *V3d_View::Export()*, related enumerations Graphic3d_ExportFormat, Graphic3d_SortType
-  as well as optional dependency from gl2ps library have been removed.
+* The methods *SetDeflection*, *SetEpsilonT*, *SetDiscretize* of the class *IntTools_EdgeFace* have been removed as excessive.
 
-@subsection upgrade_730_BuilderSolid Boolean Operations - Solid Builder algorithm
+@subsection upgrade_730_IntersectionAPI Changes in classes responsible for intersection algorithm
 
-Previously, the unclassified faces of *BOPAlgo_BuilderSolid* algorithm (i.e. the faces not used for solids creation and located outside of all created solids) were used to form an additional (not closed) solid with INTERNAL orientation.
-Since the new version, these unclassified faces are no longer added into the resulting solids. Instead, the @ref occt_algorithms_ers "warning" with a list of these faces appears.
-
-The following public methods of the *BOPAlgo_BuilderSolid* class have been removed as redundant:
-* *void SetSolid(const TopoDS_Solid& theSolid);*
-* *const TopoDS_Solid& Solid() const;*
-
-@subsection upgrade_730_BRepAlgoBO Boolean Operation classes in BRepAlgo are deprecated
-
-The API classes in the package BRepAlgo providing access to old Boolean operations are marked as deprecated:
-* BRepAlgo_Fuse
-* BRepAlgo_Common
-* BRepAlgo_Cut
-* BRepAlgo_Section
-Corresponding classes from the package BRepAlgoAPI should be used instead.
-
-@subsection upgrade_730_replace_CDM_MessageDriver_interface_by_Message_Messenger Unification of the Error/Warning reporting system of Application Framework
-
-Class *CDM_MessageDriver* and its descendants have been removed; class *Message_Messenger* is used instead in all OCAF packages.
-By default, messenger returned by *Message::DefaultMessenger()* is used, thus all messages generated by OCAF are directed in the common message queue of OCCT.
-
-In classes implementing OCAF persistence for custom attributes (those inheriting from *BinMDF_ADriver*, *XmlMDF_ADriver*), uses of method *WriteMessage()* should be replaced by call to method *Send()* of the inherited field *myMessageDriver*. Note that this method takes additional argument indicating the gravity of the message (Trace, Info, Warning, Alarm, or Fail).
-
-Class *Message_PrinterOStream* can be used instead of *CDM_COutMessageDriver* to direct all messages to a stream.
-If custom driver class is used in the application, that class shall be reimplemented inheriting from *Message_Printer* instead of *CDM_MessageDriver*.
-Method *Send()* should be redefined instead of method *Write()* of *CDM_MessageDriver*.
-To use the custom printer in OCAF, it can be either added to default messenger or set into the custom *Message_Messenger* object created in the method *MessageDriver()* of a class inheriting *CDF_Application*.
-
-@section upgrade_occt740 Upgrade to OCCT 7.4.0
-
-@subsection upgrade_740_BRepPrimAPI_MakeRevol Changes in BRepPrimAPI_MakeRevol algorithm
-Previously the algorithm could create a shape with the same degenerated edge shared between some faces. Now it is prevented. The algorithm creates the different copy of this edge for each face. The method *Generated(...)* has been changed in order to apply restriction to the input shape: input shape can be only of type VERTEX, EDGE, FACE or SOLID. For input shape of another type the method always returns empty list.
-
-@subsection upgrade_740_extremaalgo Changes in behavior of Extrema algorithms
-
-Since OCCT 7.4.0 exception is thrown on the attempt of taking points in case of infinite number of solution (IsParallel status). Request of distances is available as before. Method NbExt() always returns 1 in such cases. 
-
-@subsection upgrade_740_removed Removed features
-* The following methods of the class *BRepAlgoAPI_BooleanOperation* have been removed as obsolete or replaced:
-  - *BuilderCanWork* can be replaced with *IsDone* or *HasErrors* method.
-  - *FuseEdges* removed as obsolete.
-  - *RefineEdges* replaced with new method *SimplifyResult*.
-* The method *ImagesResult* of the class *BOPAlgo_BuilderShape* has been removed as unused. The functionality of this method can be completely replaced by the history methods *Modified* and *IsDeleted*.
-* The method *TrackHistory* of the classes *BOPAlgo_RemoveFeatures* and *BRepAlgoAPI_Defeaturing* has been renamed to *SetToFillHistory*.
-* The method *GetHistory* of the class *BRepAlgoAPI_Defeaturing* has been renamed to *History*.
+Interfaces of the following methods have been changed: IntPatch_WLineTool::ComputePurgedWLine(...), IntPatch_PrmPrmIntersection::Perform(...), IntPatch_Intersection::Perform(...), IntPatch_Intersection::ParamParamPerfom(...), IntPatch_Intersection::GeomGeomPerfom(...). Please see documentation about corresponding methods.
 

dox/overview/overview.md

@@ -18,7 +18,7 @@ modeling (CAD), manufacturing / measuring (CAM) or numerical simulation (CAE).
 @section OCCT_OVW_SECTION_2 Copyrights
 
 Open CASCADE Technology and all materials, including this documentation, is 
-Copyright (c) 1999-2018 by OPEN CASCADE S.A.S. All rights reserved.
+Copyright (c) 1999-2017 by OPEN CASCADE S.A.S. All rights reserved.
 
 @htmlonly<center>@endhtmlonly
 https://www.opencascade.com
@@ -90,6 +90,10 @@ the copyright allows you to use, modify, and redistribute Tcl/Tk for any purpose
 explicit license agreement and without paying any license fees or royalties. 
 To use Tcl/Tk, please refer to the Licensing Terms (https://www.tcl.tk/software/tcltk/license.html).
 
+**GL2PS** is developed by Christophe Geuzaine and others. It is optionally used by OCCT to
+export content of OpenGL scene to vector graphics formats (PS, PDF, EMF, SVG). 
+The library is licensed under GL2PS license (http://www.geuz.org/gl2ps/COPYING.GL2PS).
+
 **FreeType 2** is developed by Antoine Leca, David Turner, Werner Lemberg and others. 
 It is a software font engine that is designed to be small, efficient, highly customizable and 
 portable while capable of producing high-quality output (glyph images). This product 
@@ -219,9 +223,10 @@ for which OCCT is certified to work.
 | Graphic library | OpenGL 3.3+, OpenGL ES 2.0+ <br> Direct3D 9 |
 | Qt (for samples and demos) | Desktop: Qt 4.8.6+ https://www.qt.io/download/ <br> Android: Qt 5.3.2+ https://www.qt.io/download/ |
 | TCL (for testing tools)    | Tcl/Tk 8.6.3+ https://www.tcl.tk/software/tcltk/download.html <br> or ActiveTcl 8.6 https://www.activestate.com/activetcl/downloads (for Windows)| 
-| Freetype (for text rendering) | FreeType 2.4.11-2.7.1 https://sourceforge.net/projects/freetype/files/ |
+| Freetype (for text rendering) | FreeType 2.4.11-2.5.5 https://sourceforge.net/projects/freetype/files/ |
 | FreeImage (optional, for support of common 2D graphic formats) | FreeImage 3.17.0+ https://sourceforge.net/projects/freeimage/files |
 | FFmpeg (optional, for video recording) | FFmpeg 3.1+ https://www.ffmpeg.org/download.html |
+| gl2ps (optional, for export contents of OCCT viewer to vector formats) | gl2ps-1.3.8+  http://geuz.org/gl2ps/ |
 | Intel TBB (optional, for multithreaded algorithms) | TBB 4.x or 5.x https://www.threadingbuildingblocks.org/ |
 | VTK (for VTK Integration Services | VTK 6.1+ http://www.vtk.org/download/ |
 | Doxygen (optional for building documentation) | Doxygen 1.8.5+ https://www.stack.nl/~dimitri/doxygen/download.html |
@@ -281,13 +286,13 @@ When the installation is complete, you will find the directories for 3rd party p
 
 @figure{/overview/images/overview_3rdparty.png}
 
-The contents of the OCCT-7.3.0 directory (called further "OCCT root", or $CASROOT) are as follows:
+The contents of the OCCT-7.0.0 directory (called further "OCCT root", or $CASROOT) are as follows:
 
 @figure{/overview/images/overview_installation.png, "The directory tree"}
 
   * **adm**   This folder contains administration files, which allow rebuilding OCCT;
   * **adm/cmake**  This folder contains files of CMake building procedure;
-  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++ 2010, 2012, 2013, 2015 and 2017 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
+  * **adm/msvc**  This folder contains Visual Studio projects for Visual C++  2005, 2008, 2010, 2012 and 2013 which allow rebuilding OCCT under Windows platform in 32 and 64-bit mode;
   * **data**  This folder contains CAD files in different formats, which can be used to test the OCCT functionality;
   * **doc**  This folder contains OCCT documentation in HTML and PDF format;
   * **dox**  This folder contains sources of OCCT documentation in plain text (MarkDown) format;
@@ -295,7 +300,6 @@ The contents of the OCCT-7.3.0 directory (called further "OCCT root", or $CASROO
   * **samples**  This folder contains sample applications.
   * **src**  This folder contains OCCT source files. They are organized in folders, one per development unit;
   * **tests**  This folder contains scripts for OCCT testing.
-  * **tools**  This folder contains sources of Inspector tool.
   * **win64/vc10**  This folder contains executable and library files built in optimize mode for Windows platform by Visual C++  2010;
 
 @section OCCT_OVW_SECTION_4_2 Environment Variables
@@ -306,7 +310,7 @@ To run any Open CASCADE Technology application you need to set the environment v
 
 You can define the environment variables with env.bat script located in the 
 $CASROOT folder. This script accepts two arguments to be used: 
-the version of Visual Studio (vc10 -- vc141) and the architecture (win32 or win64).
+the version of Visual Studio (vc8 -- vc12) and the architecture (win32 or win64).
 
 The additional environment settings necessary for compiling OCCT libraries and samples 
 by Microsoft Visual Studio can be set using script custom.bat located in the same folder. 

dox/user_guides/boolean_operations/boolean_operations.md

@@ -2171,7 +2171,7 @@ aMV.SetArguments(aLS);
 // setting options for this algorithm is similar to setting options for GF algorithm (see "GF Usage" chapter)
 ...
 // Additional option of the algorithm
-Standard_Boolean bAvoidInternalShapes = Standard_False; // Set to True to exclude from the result any shapes internal to the solids
+Standard_Boolean bAvoidInternalShapes = Standard_False; /* Avoid or not the internal for solids shapes in the result*/
 aMV.SetAvoidInternalShapes(bAvoidInternalShapes);
 
 // Perform the operation
@@ -2819,10 +2819,10 @@ To enable the safe processing mode for the operation in DRAW, it is necessary to
 bnondestructive 1
 ~~~~
 
-@subsection occt_algorithms_11a_4 How to disable check of input solids for inverted status
+@subsection occt_algorithms_11a_4 Disabling check of the input solids for inverted status
 
-By default, all input solids are checked for inverted status, i.e. the solids are classified to understand if they are holes in the space (negative volumes) or normal solids (positive volumes). The possibility to disable the check of the input solids for inverted status is the advanced option in Boolean Operation component. This option can be applied to all Basic operations, such as General Fuse, Splitting, Boolean, Section, Maker Volume and Cells building.
-This option allows avoiding time-consuming classification of the input solids and processing them in the same way as positive volumes, saving up to 10 percent of time on the cases with a big number of input solids.
+By default, all input solids are checked for inverted status, i.e. the solids are classified to understand if they are holes in the space (negative volumes) or normal solids (positive volumes). The possibility to disable the check of the input solids for inverted status is the advanced option in Boolean Operation component. This option can be applied to all Basic operations such as General Fuse, Splitting, Boolean, Section, Maker Volume, Cells building.
+This option allows avoiding time-consuming classification of the input solids and operate with them as with positive volumes, saving up to 10 percent of time on the cases with big number of input solids.
 
 The classification should be disabled only if the user is sure that there are no negative volumes among the input solids, otherwise the result may be invalid.
 
@@ -2842,7 +2842,7 @@ aGF.SetCheckInverted(Standard_False);
 ~~~~
 
 #### TCL level
-To enable/disable the classification of the solids in DRAW, it is necessary to call *bcheckinverted* command with the appropriate value:
+To enable/disable the classification of the solids in DRAW, it is necessary to call the *bcheckinverted* command with appropriate value:
 * 0 - disabling the classification;
 * 1 - default value, enabling the classification.
 
@@ -2852,7 +2852,7 @@ bcheckinverted 0
 
 @subsection occt_algorithms_11a_5_obb Usage of Oriented Bounding Boxes
 
-Since Oriented Bounding Boxes are usually much tighter than Axes Aligned Bounding Boxes (for more information on OBB see the @ref occt_modat_6 "Bounding boxes" chapter of Modeling data User guide) its usage can significantly speed-up the intersection stage of the operation by reducing the number of interfering objects.
+Since Oriented Bounding Boxes are usually much tighter than Axes Aligned Bounding Boxes (for more information on OBB please see the @ref occt_modat_6 "Bounding boxes" chapter of Modeling data User guide) its usage can significantly speed-up the intersection stage of the operation by reducing the number of interfering objects.
 
 @subsubsection occt_algorithms_11a_5_obb_1 Usage
 
@@ -2931,30 +2931,28 @@ Warning: The positioning of the shapes leads to creation of small edges without
 
 @section occt_algorithms_history History Information
 
-All operations in Boolean Component support @ref occt_modalg_hist "History information". This chapter describes how the History is filled for these operations.
+The chapter describes the rules for filling the History Information (or just History) for the arguments of the operations in Boolean Component.
+The History is available only for the VERTICES, EDGES, FACES and SOLIDS from the input arguments.
 
-Additionally to Vertices, Edges and Faces the history is also available for the Solids.
+The History allows tracking the modification of the input shapes during the operation. It consists of the following information:
+* Information about Deleted shapes;
+* Information about Modified shapes;
+* Information about Generated shapes;
 
-The rules for filling the History information about Deleted and Modified shapes are the same as for the API algorithms.
+All History information is filled basing on the result of current operation. History cannot return any shapes not contained in the result.
+Thus if the result of the operation is empty shape, all input shapes will be considered as Deleted and none will have Modified and Generated shapes.
 
-Only the rules for Generated shapes require clarification.
-In terms of the algorithms in Boolean Component the shape from the arguments can have Generated shapes only if these new shapes 
-have been obtained as a result of pure intersection (not overlapping) of this shape with any other shapes from arguments. Thus, the Generated shapes are always:
-* VERTICES created from the intersection points and may be Generated from edges and faces only;
-* EDGES created from the intersection edges and may be Generated from faces only.
+@subsection occt_algorithms_history_del Deleted shapes
 
-So, only EDGES and FACES could have information about Generated shapes. For all other types of shapes the list of Generated shapes will be empty.
-
-@subsection occt_algorithms_history_ex Examples
-
-Here are some examples illustrating the History information.
-
-@subsubsection occt_algorithms_history_ex_del Deleted shapes
-
-The result of CUT operation of two overlapping planar faces (see the example below) does not contain any parts from the tool face. Thus, the tool face is considered as Deleted.
+The shape is considered as Deleted if the result shape do not contain the shape itself and none of its splits.
+For example, the result of CUT operation of two overlapping planar faces (see the example below) does not contain any parts from the tool face. Thus, the tool faces is considered as Deleted.
 If the faces are not fully coinciding, the result must contain some parts of the object face. In this case object face will be considered as not deleted.
 But if the faces are fully coinciding, the result must be empty, and both faces will be considered as Deleted.
 
+To get the information about Deleted shapes it is necessary to use the method *Standard_Boolean IsDeleted(const TopoDS_Shape& theS)*.
+
+To get the information about Deleted shapes in DRAW it is necessary to use the command *bisdeleted shape*.
+
 Example of the overlapping faces:
 
 ~~~~
@@ -2969,21 +2967,29 @@ baddtools f2
 bfillds
 bbop r 2
 
-savehistory cut_hist
-isdeleted cut_hist f1
+bisdeleted f1
 # Not deleted
 
-isdeleted cut_hist f2
+bisdeleted f2
 # Deleted
 ~~~~
 
-@subsubsection occt_algorithms_history_ex_modif Modified shapes
+@subsection occt_algorithms_history_modif Modified shapes
 
-In the FUSE operation of two edges intersecting in one point (see the example below), both edges will be split by the intersection point. All these splits will be contained in the result.
+The shape is considered as Modified if the result shape contains any of the splits of the shape, not the shape itself. The shape can be modified only into the shapes with same dimension.
+The splits of the shape contained in the result shape are Modified from the shape.
+
+For example, in the FUSE operation of two edges intersecting in one point (see the example below), both edges will be split by the intersection point. All these splits will be contained in the result.
 Thus, each of the input edges will be Modified into its two splits.
 But in the CUT operation on the same edges, the tool edge will be Deleted from the result and, thus, will not have any Modified shapes.
 
+To get the information about Modified shapes it is necessary to use the method *const TopTools_ListOfShape& Modified(const TopoDS_Shape& theS)*.
+The list of Modified elements will contain only those which are contained in the result of the operation. If the list is empty the shape has not been modified and it is necessary to check if it has been Deleted.
+
+To get the information about Modified shapes in DRAW it is necessary to use the command *bmodified modif shape*.
+
 Example of the intersecting edges:
+
 ~~~~
 line l1 0 0 0 1 0 0
 mkedge e1 l1 -10 10
@@ -3000,35 +3006,44 @@ bfillds
 # fuse operation
 bbop r 1
 
-savehistory fuse_hist
-
-modified m1 fuse_hist e1
+bmodified m1 e1
 nbshapes m1
 # EDGES: 2
 
-modified m2 fuse_hist e2
+bmodified m2 e2
 nbshapes m2
 # EDGES: 2
 
 # cut operation
 bbop r 2
 
-savehistory cut_hist
-
-modified m1 cut_hist e1
+bmodified m1 e1
 nbshapes m1
 # EDGES: 2
 
-modified m2 cut_hist e2
+bmodified m2 e2
 # The shape has not been modified
+
 ~~~~
 
 
-@subsubsection occt_algorithms_history_gen Generated shapes
+@subsection occt_algorithms_history_gen Generated shapes
 
-Two intersecting edges will both have the intersection vertices Generated from them.
+In terms of the algorithms in Boolean Component the shape from the arguments can have Generated shapes only if these new shapes have been obtained as a result of pure intersection (not overlapping)
+of this shape with any other shapes from arguments. Thus, the Generated shapes are always:
+* VERTICES created from the intersection points and may be Generated from edges and faces only;
+* EDGES created from the intersection edges and may be Generated from faces only.
 
-As for the operation with intersecting faces, consider the following example:
+So, only EDGES and FACES could have information about Generated shapes. For all other types of shapes the list of Generated shapes will be empty.
+
+For example, the two intersecting edges will both have the intersection vertices Generated from them.
+
+To get the information about Generated shapes it is necessary to use the method *const TopTools_ListOfShape& Generated(const TopoDS_Shape& theS)*.
+The list of Generated elements will contain only those which are contained in the result of the operation. If the list is empty no new shapes have been Generated from the shape.
+
+To get the information about Generated shapes in DRAW it is necessary to use the command *bgenerated gen shape*.
+
+Example of interfering faces
 
 ~~~~
 plane p1 0 0 0 0 0 1
@@ -3046,13 +3061,11 @@ bfillds
 # fuse operation
 bbop r 1
 
-savehistory fuse_hist
-
-generated gf1 fuse_hist f1
+bgenerated gf1 f1
 nbshapes gf1
 # EDGES: 1
 
-generated gf2 fuse_hist f2
+bgenerated gf2 f2
 nbshapes gf2
 # EDGES: 1
 
@@ -3060,60 +3073,14 @@ nbshapes gf2
 # common operation - result is empty
 bbop r 0
 
-savehistory com_hist
-
-generated gf1 com_hist f1
+bgenerated gf1 f1
 # No shapes were generated from the shape
 
-generated gf2 com_hist f2
+bgenerated gf2 f2
 # No shapes were generated from the shape
 
 ~~~~
 
-@section occt_algorithms_simplification BOP result simplification
-
-The API algorithms implementing Boolean Operations provide possibility to simplify the result shape by unification of the connected tangential edges and faces.
-This simplification is performed by the method *SimplifyResult* which is implemented in the class *BRepAlgoAPI_BuilderAlgo* (General Fuse operation).
-It makes it available for users of the classes *BRepAlgoAPI_BooleanOperation* (all Boolean Operations) and *BRepAlgoAPI_Splitter* (split operation).
-
-The simplification is performed by the means of *ShapeUpgrade_UnifySameDom* algorithm. The result of operation is overwritten with the simplified result.
-
-The simplification is performed without creation of the Internal shapes, i.e. shapes connections will never be broken. It is performed on the whole result shape.
-Thus, if the input shapes contained connected tangent edges or faces unmodified during the operation they will also be unified.
-
-History of the simplification is merged into the main history of operation, thus it will be accounted when asking for Modified, Generated and Deleted shapes.
-
-Some options of the main operation are passed into the Unifier:
-- Fuzzy tolerance of the operation is given to the Unifier as the linear tolerance.
-- Non destructive mode here controls the safe input mode in Unifier.
-
-For controlling this possibility in DRAW the command **bsimplify** has been implemented. Please see the @ref occt_draw_bop_options "Boolean Operations options" chapter in draw user guide.
-
-
-@subsection occt_algorithms_simplification_examples Examples
-
-Here is the simple example of simplification of the result of Fuse operation of two boxes:
-
-~~~~
-bsimplify -f 1
-
-box b1 10 10 15
-box b2 3 7 0 10 10 15
-bclearobjects
-bcleartools
-baddobjects b1
-baddtools b2
-bfillds
-bapibop r 1
-~~~~
-
-<table align="center">
-  <tr>
-    <td>@figure{/user_guides/boolean_operations/images/bop_simple_001.png, "Not simplified result", 420}</td>
-    <td>@figure{/user_guides/boolean_operations/images/bop_simple_002.png, "Simplified result", 420}</td>
-  </tr>
-</table>
-
 
 @section occt_algorithms_11b Usage 
 

dox/user_guides/inspector/images/dfbrowser_selection_in_tree_view.svg

@@ -73,8 +73,8 @@
      inkscape:pageopacity="0.0"
      inkscape:pageshadow="2"
      inkscape:zoom="1"
-     inkscape:cx="529.17338"
-     inkscape:cy="317.0623"
+     inkscape:cx="128.94698"
+     inkscape:cy="215.23058"
      inkscape:document-units="mm"
      inkscape:current-layer="layer1"
      showgrid="false"
@@ -85,10 +85,10 @@
      inkscape:showpageshadow="false"
      inkscape:snap-nodes="false"
      inkscape:snap-global="false"
-     inkscape:window-width="1332"
+     inkscape:window-width="1522"
      inkscape:window-height="784"
-     inkscape:window-x="581"
-     inkscape:window-y="97"
+     inkscape:window-x="1725"
+     inkscape:window-y="5"
      inkscape:window-maximized="0" />
   <metadata
      id="metadata3732">
@@ -200,19 +200,5 @@
        inkscape:export-filename="D:\OCCT\master_CR29018\dox\user_guides\inspector\images\selection_in_tree_view.png"
        inkscape:export-xdpi="90"
        inkscape:export-ydpi="90" />
-    <image
-       y="55.529915"
-       x="167.95375"
-       id="image1593"
-       xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABkAAAAZCAIAAABLixI0AAAAA3NCSVQICAjb4U/gAAAAsElEQVQ4
-jcWU4QnEIAyFtWSKCg4hbucmzuQUYufI/fCQeG1VTODer5TCx3tJjA4hKCGBc857zwfFGKFW1tpt
-Ss65FgffUVPHQkQxFlMdS2stxpLMyPQF9AMRG+6ROzYObz9KuVi+qIw5xVjqFnM6mdF+0ZgrkUdz
-NOasiFKulciT/aq4xd7N92t9CP9+27rXM2vxDVH7tN68ORXx05P9+3Vv7nfv283mCJRSKSU+SFgf
-ylJCrIGwaxIAAAAASUVORK5CYII=
-"
-       style="image-rendering:optimizeSpeed"
-       preserveAspectRatio="none"
-       height="6.6145835"
-       width="6.6145835" />
   </g>
 </svg>

dox/user_guides/inspector/images/property_panel_item_selection.svg

@@ -57,9 +57,9 @@
      borderopacity="1.0"
      inkscape:pageopacity="0.0"
      inkscape:pageshadow="2"
-     inkscape:zoom="4"
-     inkscape:cx="585.11712"
-     inkscape:cy="337.7975"
+     inkscape:zoom="1"
+     inkscape:cx="314.86686"
+     inkscape:cy="103.10687"
      inkscape:document-units="mm"
      inkscape:current-layer="layer1"
      showgrid="false"
@@ -70,8 +70,8 @@
      fit-margin-bottom="0"
      inkscape:window-width="1252"
      inkscape:window-height="826"
-     inkscape:window-x="276"
-     inkscape:window-y="50"
+     inkscape:window-x="2069"
+     inkscape:window-y="98"
      inkscape:window-maximized="0" />
   <metadata
      id="metadata3933">
@@ -81,7 +81,7 @@
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
+        <dc:title></dc:title>
       </cc:Work>
     </rdf:RDF>
   </metadata>
@@ -155,19 +155,5 @@
        inkscape:export-filename="D:\OCCT\master_CR29018\dox\user_guides\inspector\images\selection_in_tree_view.png"
        inkscape:export-xdpi="90"
        inkscape:export-ydpi="90" />
-    <image
-       y="102.39896"
-       x="62.498363"
-       id="image5982"
-       xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABkAAAAZCAIAAABLixI0AAAAA3NCSVQICAjb4U/gAAAAsElEQVQ4
-jcWU4QnEIAyFtWSKCg4hbucmzuQUYufI/fCQeG1VTODer5TCx3tJjA4hKCGBc857zwfFGKFW1tpt
-Ss65FgffUVPHQkQxFlMdS2stxpLMyPQF9AMRG+6ROzYObz9KuVi+qIw5xVjqFnM6mdF+0ZgrkUdz
-NOasiFKulciT/aq4xd7N92t9CP9+27rXM2vxDVH7tN68ORXx05P9+3Vv7nfv283mCJRSKSU+SFgf
-ylJCrIGwaxIAAAAASUVORK5CYII=
-"
-       style="image-rendering:optimizeSpeed"
-       preserveAspectRatio="none"
-       height="6.6145835"
-       width="6.6145835" />
   </g>
 </svg>

dox/user_guides/inspector/images/treeview_preferences.svg

@@ -1,417 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:osb="http://www.openswatchbook.org/uri/2009/osb"
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="165.36458mm"
-   height="99.483337mm"
-   viewBox="0 0 165.36458 99.483337"
-   version="1.1"
-   id="svg8"
-   sodipodi:docname="treeview_preferences.svg"
-   inkscape:version="0.92.2 (5c3e80d, 2017-08-06)">
-  <defs
-     id="defs2">
-    <linearGradient
-       id="linearGradient920"
-       osb:paint="solid">
-      <stop
-         style="stop-color:#f0f0f0;stop-opacity:1;"
-         offset="0"
-         id="stop918" />
-    </linearGradient>
-  </defs>
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="0.98994949"
-     inkscape:cx="237.05748"
-     inkscape:cy="217.01184"
-     inkscape:document-units="mm"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     inkscape:window-width="1336"
-     inkscape:window-height="850"
-     inkscape:window-x="276"
-     inkscape:window-y="52"
-     inkscape:window-maximized="1"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     showborder="true"
-     inkscape:showpageshadow="false" />
-  <metadata
-     id="metadata5">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(-208.35938,-140.66904)">
-    <rect
-       style="opacity:1;fill:#000000;fill-opacity:0;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4147-9"
-       width="164.83542"
-       height="98.95417"
-       x="208.62396"
-       y="140.93362"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#e3f4d7;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4159-1"
-       width="155.83388"
-       height="89.326508"
-       x="212.62471"
-       y="145.50125"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.42238337;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-1"
-       width="40.466312"
-       height="11.316654"
-       x="280.74753"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.42572066;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-5-9"
-       width="41.108295"
-       height="11.316654"
-       x="321.21384"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="291.19687"
-       y="156.27933"
-       id="text5675-5"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-3"
-         x="291.19687"
-         y="156.27933"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Column_1</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="331.87143"
-       y="156.27933"
-       id="text5679-5"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5681-0"
-         x="331.87143"
-         y="156.27933"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Column_4</tspan></text>
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1.97454143;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-7-0"
-       width="145.13353"
-       height="68.954567"
-       x="217.1886"
-       y="160.74771"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.5293566;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4195-1-1-3"
-       width="63.558933"
-       height="11.316654"
-       x="217.1886"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="243.21165"
-       y="156.4707"
-       id="text5675-5-2"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-3-2"
-         x="243.21165"
-         y="156.4707"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Name</tspan></text>
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8"
-       width="63.558926"
-       height="80.271225"
-       x="217.1886"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-8"
-       width="40.466305"
-       height="80.271225"
-       x="280.74753"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.52916667;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-8-8"
-       width="41.108303"
-       height="80.271225"
-       x="321.21384"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1"
-       width="63.558929"
-       height="11.316656"
-       x="217.1886"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-0"
-       width="40.466309"
-       height="11.316656"
-       x="280.74753"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-7"
-       width="41.108307"
-       height="11.316656"
-       x="321.21384"
-       y="149.43106"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:#f0f0f0;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.44990167;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5"
-       width="38.957039"
-       height="58.495327"
-       x="307.89423"
-       y="158.80739"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="317.94843"
-       y="174.62115"
-       id="text5675-5-4"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-3-6"
-         x="317.94843"
-         y="174.62115"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Column_1</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="317.78735"
-       y="165.06331"
-       id="text5675-5-2-9"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5677-3-2-1"
-         x="317.78735"
-         y="165.06331"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Name</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="317.94843"
-       y="184.37038"
-       id="text5679-5-9"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5681-0-2"
-         x="317.94843"
-         y="184.37038"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Column_2</tspan></text>
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-8"
-       width="38.957031"
-       height="9.7492247"
-       x="307.89423"
-       y="158.80739"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-8-8"
-       width="38.957035"
-       height="9.7492256"
-       x="307.89423"
-       y="168.55661"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-8-7"
-       width="38.957035"
-       height="9.7492256"
-       x="307.89423"
-       y="178.30583"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-8-4"
-       width="38.957035"
-       height="9.7492256"
-       x="307.89423"
-       y="188.05505"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-8-2"
-       width="38.957035"
-       height="9.7492256"
-       x="307.89423"
-       y="197.80428"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <rect
-       style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.1984375;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0.29879999;stroke-opacity:1"
-       id="rect4157-5-8-1-8-71"
-       width="38.957035"
-       height="9.7492256"
-       x="307.89423"
-       y="207.5535"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90" />
-    <image
-       y="170.78539"
-       x="310.04617"
-       id="image1119"
-       xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAIAAAAC64paAAAAA3NCSVQICAjb4U/gAAAAi0lEQVQ4 jWOccOIbA7mAiWydI0Lz+yd3yNR8bHHblvbEL2+fk6z52OK2uye2W8VW8ghL4tP8/skdNOfBdSpb eBFw9sWtc3dOyIHrx6MTi2ar2GpeYUmIfvw6GRgYGDGT569vX3ZPzH335A4DAwMenVhsZmBgYOPi cc2fLCSjgl8ndpuJB0MieQ4bzQCA/UWjCjrjVAAAAABJRU5ErkJggg== "
-       style="image-rendering:optimizeSpeed"
-       preserveAspectRatio="none"
-       height="5.2916665"
-       width="5.2916665" />
-    <image
-       y="161.03616"
-       x="310.04617"
-       id="image1119-4"
-       xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAIAAAAC64paAAAAA3NCSVQICAjb4U/gAAAAi0lEQVQ4 jWOccOIbA7mAiWydI0Lz+yd3yNR8bHHblvbEL2+fk6z52OK2uye2W8VW8ghL4tP8/skdNOfBdSpb eBFw9sWtc3dOyIHrx6MTi2ar2GpeYUmIfvw6GRgYGDGT569vX3ZPzH335A4DAwMenVhsZmBgYOPi cc2fLCSjgl8ndpuJB0MieQ4bzQCA/UWjCjrjVAAAAABJRU5ErkJggg== "
-       style="image-rendering:optimizeSpeed"
-       preserveAspectRatio="none"
-       height="5.2916665"
-       width="5.2916665" />
-    <image
-       y="200.03305"
-       x="310.04617"
-       id="image1119-7"
-       xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAIAAAAC64paAAAAA3NCSVQICAjb4U/gAAAAi0lEQVQ4 jWOccOIbA7mAiWydI0Lz+yd3yNR8bHHblvbEL2+fk6z52OK2uye2W8VW8ghL4tP8/skdNOfBdSpb eBFw9sWtc3dOyIHrx6MTi2ar2GpeYUmIfvw6GRgYGDGT569vX3ZPzH335A4DAwMenVhsZmBgYOPi cc2fLCSjgl8ndpuJB0MieQ4bzQCA/UWjCjrjVAAAAABJRU5ErkJggg== "
-       style="image-rendering:optimizeSpeed"
-       preserveAspectRatio="none"
-       height="5.2916665"
-       width="5.2916665" />
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="317.94843"
-       y="194.1196"
-       id="text5679-5-9-2"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5681-0-2-3"
-         x="317.94843"
-         y="194.1196"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Column_3</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="317.94843"
-       y="203.86882"
-       id="text5679-5-9-4"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5681-0-2-9"
-         x="317.94843"
-         y="203.86882"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Column_4</tspan></text>
-    <text
-       xml:space="preserve"
-       style="font-style:normal;font-weight:normal;font-size:3.38666677px;line-height:0%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.28222224px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-       x="317.94843"
-       y="213.61804"
-       id="text5679-5-9-9"
-       inkscape:export-filename="F:\OCC\master_CR29018\dox\user_guides\inspector\images\3DView.png"
-       inkscape:export-xdpi="90"
-       inkscape:export-ydpi="90"><tspan
-         sodipodi:role="line"
-         id="tspan5681-0-2-4"
-         x="317.94843"
-         y="213.61804"
-         style="font-size:3.88055563px;line-height:1.25;stroke-width:0.28222224px">Column_5</tspan></text>
-  </g>
-</svg>

dox/user_guides/inspector/inspector.md

@@ -5,39 +5,41 @@ Inspector  {#occt_user_guides__inspector}
  
 @section occt_inspector_1 Introduction
 
-This manual explains how to use the Inspector.
+This manual explains how to use Inspector.
 
 @subsection occt_inspector_1_1 Overview
-Inspector is a Qt-based library that provides functionality to interactively inspect low-level content of the OCAF data model, OCCT viewer and Modeling Data.
+Inspector is a Qt-based library that provides functionality to interactively inspect low-level content of the OCAF data model, OCCT viewer and Modelisation Data.
 This component is aimed to assist the developers of OCCT-based applications to debug the problematic situations that occur in their applications.
 
 Inspector has a plugin-oriented architecture. The current release contains the following plugins:
 
 | Plugin | OCCT component | Root class of OCCT investigated component |
 | :----- | :----- | :----- |
-| @ref occt_inspector_2_2 "DFBrowser"| OCAF | *TDocStd_Application* |
-| @ref occt_inspector_2_3 "VInspector"| Visualization | *AIS_InteractiveContext* |
-| @ref occt_inspector_2_4 "ShapeView"| Modeling Data | *TopoDS_Shape* |
+| @ref occt_inspector_2_2 "DFBrowser"| OCAF | TDocStd_Application |
+| @ref occt_inspector_2_3 "VInspector"| Visualization | AIS_InteractiveContext |
+| @ref occt_inspector_2_4 "ShapeView"| Modelisation Data | TopoDS_Shape |
 
 
 Each plugin implements logic of a corresponding OCCT component.
 
-Each of the listed plugins is embedded in the common framework, thus it is possible to manage, which plugins should be loaded by the Inspector, and to extend their number by implementing a new plugin.
+Each of the listed plugins is embeded in the common framework.
+The user is able to manage which plugins should be loaded by Inspector.
+Also he can extend number of plugins by implementing a new plugin.
 
 
 @subsection occt_inspector_1_3 Getting started
 
 There are two launch modes:
-1. Launch **TInspectorEXE** executable sample. For more details see @ref occt_inspector_4_1 "TInspectorEXE" section;
-2. Launch DRAW, load plugin INSPECTOR, and use *tinspector* command.
-   For more details see @ref occt_inspector_4_2 "Launch in DRAW Test Harness" section.
+1. Launch **TInspectorEXE** executable sample. For more details see @ref occt_inspector_6 "TInspectorEXE" section;
+2. Launch DRAW, load plugin INSPECTOR, and use **tinspector** command.
+   For more details see @ref occt_inspector_7 "Launch in DRAW Test Harness" section.
 
 
-Note. If you have no Inspector library in your build directory, please, make sure that OCCT is compiled with *BUILD_Inspector* 
-option ON. For more details see @ref occt_inspector_5 "Build procedure".
+Note. If you have no Inspector library in your build directory, please make sure that OCCT is compiled with *BUILD_Inspector* 
+option ON. For more details see @ref occt_inspector_4 "Build procedure".
 
 
-@section occt_inspector_2 Inspector Plugins
+@section occt_inspector_2 Inspector
 
 @subsection occt_inspector_2_1 Overview
 
@@ -53,9 +55,9 @@ Inspector consists of the following components:
 
 @figure{dfbrowser.png, "DFBrowser"}
 
-This plugin visualizes the content of *TDocStd_Application* in a tree view. It shows application documents, 
-the hierarchy of *TDF_Labels*, the content of *TDF_Attributes* and interconnection between attributes (e.g. references).
-Additionally there is a 3D view to visualize *TopoDS_Shape* elements stored in the document.
+This plugin visualizes content of TDocStd_Application in a tree view. It shows documents of the application,
+hierarchy of TDF_Labels, content of TDF_Attributes and interconnection between attributes (e.g. references).
+Additionally it has 3D view to visualize TopoDS_Shape elements stored in the document.
 
 @subsubsection occt_inspector_2_2_2 Elements
 
@@ -67,95 +69,96 @@ Each OCAF element has own tree view item:
 
 | Type | Tree item | Text | Description |
 | :----- | :----- | :----- | :----- |
-| *TDocStd_Application* | Application | *TDocStd_Application* | The root of tree view. Its children are documents.|
-| *TDocStd_Document* | Document | entry : name | A child of *Application* item. Its children are *Label* and *Attribute* items.<br> Text view is an entry of the root label and the value of *TDataStd_Name* attribute for the label if it exists. |
-| *TDF_Label* | Label | entry : name | A child of a *Document* or another *Label* item. Its children and text view are the same as for Document item. |
-| *TDF_Attribute* | Attribute | attribute type [additional information] | A child of a *Label*. It has no children. <br> Text view is the attribute type *(DynamicType()->Name()* of *TDF_Attribute*) and additional information (a combination of attribute values). |
+| TDocStd_Application | Application | TDocStd_Application | It is the root of tree view. Children are documents.|
+| TDocStd_Document | Document | entry : name | It is a child of Application item. Children are Labels and Attributes items.<br> Text view is an entry of the root label and the value of TDataStd_Name attribute for the label if it exists. |
+| TDF_Label | Label | entry : name | It is a child of a Document or another Label item. Children and text view are the same as for Document item. |
+| TDF_Attribute | Attribute | attribute type [additional information] | It is a child of a Label. It has no children. <br> Text view is the attribute type (DynamicType()->Name() of TDF_Attribute) and additional information (a combination of attribute values) |
 
 
-Additional information about TDF_Attributes:
+Additional information of TDF_Attributes:
 
 | Type | Text |
 | :----- | :----- |
-| *TDocStd_Owner* | [storage format] |
-| *TDataStd_AsciiString*,<br> *TDataStd_Name*,<br> *TDataStd_Real*,<br> other *Simple* type attributes | [value] |
-| *TDataStd_BooleanList*,<br> *TDataStd_ExtStringList*,<br> other *List* attributes | [value_1 ... value_n] |
-| *TDataStd_BooleanArray*,<br> *TDataStd_ByteArray*,<br> other *Array* type attributes | [value_1 ... value_n] |
-| *TDataStd_TreeNode* | [tree node ID  ==> Father()->Label()] (if it has a father) or <br> [tree node ID <== First()->Label()] (if it has NO father)|
-| *TDataStd_TreeNode(XDE)* | [XDE tree node ID  ==> Father()->Label()] (if it has a father), <br> [XDE tree Node ID <== label_1, ..., label_n] (if it has NO father)|
-| *TNaming_NamedShape* | [shape type : evolution] |
-| *TNaming_UsedShapes* | [map extent] |
+| TDocStd_Owner | [storage format] |
+| TDataStd_AsciiString,<br> TDataStd_Name,<br> TDataStd_Real,<br> @ref occt_attribute_simple_types "other Simple types" | [value] |
+| TDataStd_BooleanList,<br> TDataStd_ExtStringList,<br> @ref occt_attribute_list_types "other List types" | [value_1 ... value_n] |
+| TDataStd_BooleanArray,<br> TDataStd_ByteArray,<br> @ref occt_attribute_array_types "other Array types" | [value_1 ... value_n] |
+| TDataStd_TreeNode | [tree node ID  ==> Father()->Label()] (if it has father) or <br> [tree node ID <== First()->Label()] (if it has NO father)|
+| TDataStd_TreeNode(XDE) | [@ref occt_attribute_xde_tree_node_id "XDE tree node ID"  ==> Father()->Label()] (if it has father), <br> [@ref occt_attribute_xde_tree_node_id "XDE tree Node ID" <== label_1, ..., label_n] (if it has NO father)|
+| TNaming_NamedShape | [shape type : evolution] |
+| TNaming_UsedShapes | [map extent] |
 
 
 Custom color of items:
 
 | OCAF element Type | Color |
 | :----- | :----- |
-| *TDF_Label* | <b>dark green</b>, if the label has *TDataStd_Name* attribute, <br><b>light grey</b> if the label is empty (has no attributes on all levels of  hierarchy),<br> <b>black</b> otherwise. |
-| *TNaming_NamedShape* | <b>dark gray</b> for *TopAbs_FORWARD* orientation of *TopoDS_Shape*, <br> <b>gray</b> for *TopAbs_REVERSED* orientation of *TopoDS_Shape*, <br> <b>black</b> for other orientation. |
+| TDF_Label | <b>dark green</b>, if the label has TDataStd_Name attribute, <br><b>light grey</b> if the label is empty (has no attributes on all levels of hierarchy),<br> <b>black</b> otherwise |
+| TNaming_NamedShape | <b>dark gray</b> for TopAbs_FORWARD orientation of TopoDS_Shape, <br> <b>gray</b> for TopAbs_REVERSED orientation of TopoDS_Shape, <br> <b>black</b> for other orientation |
 
 
-Context pop-up menu:
+Context popup menu:
 | Action | Functionality |
 | :----- | :----- |
-| Expand | Expands the next two levels under the selected item. |
-| Expand All | Expands the whole tree of the selected item. |
-| Collapse All | Collapses the whole tree of the selected item. |
+| Expand | Expands the next two levels under the selected item |
+| Expand All | Expands the whole tree of the selected item |
+| Collapse All | Collapses the whole tree of the selected item |
 
 
 <b>Property Panel</b>
 
-Property panel is used to display the content of *Label* or *Attribute* tree view items or Search result view.
-The information is usually shown in one or several tables.
+Property panel is used to display content of Label or Attribute tree view items.
+This control is used for content of Label or Attribute tree view items or Search result view.
+Information is usually shown in one or several tables.
 
-*TDF_Attribute* has the following content in the Property Panel:
+TDF_Attribute has the following content in Property Panel:
 
 <table>
 <tr><th>Type</th><th>Description</th><th>Content</th></tr>
-<tr><td><i>TDF_Label</i></td>
+<tr><td>TDF_Label</td>
     <td> a table of [entry or attribute name, value]</td>
     <td>@figure{property_panel_label.png, "",140}</td></tr>
-<tr><td><i>TDocStd_Owner</i>,<br> Simple type attributes, <br> List type attributes</td>
+<tr><td>TDocStd_Owner,<br> @ref occt_attribute_simple_types "Simple types", <br> @ref occt_attribute_list_types "List types"</td>
     <td>a table of [method name, value]</td>
     <td>@figure{property_panel_simple_type.png, "",140}</td></tr>
-<tr><td><i>TDataStd_BooleanArray</i>,<br> <i>TDataStd_ByteArray</i>,<br> other Array type attributes</td>
-    <td>2 controls: <br> - a table of [array bound, value], <br> - a table of [method name, value] </td>
+<tr><td>TDataStd_BooleanArray,<br> TDataStd_ByteArray,<br> @ref occt_attribute_array_types "other Array types"</td>
+    <td>2 controls: <br>  * a table of [array bound, value], <br>  * table of [method name, value]</td>
     <td>@figure{property_panel_array.png, "",140}</td></tr>
-<tr><td><i>TDataStd_TreeNode</i></td>
-    <td>2 controls: <br> - a table of [Tree ID, value] (visible only if Tree ID() != ID() ), <br> - a tree view of tree nodes starting from *Root()* of the tree node. The current tree node has <b>dark blue</b> text.</td>
+<tr><td>TDataStd_TreeNode</td>
+    <td>2 controls: <br>  * a table of [Tree ID, value] (visible only if Tree ID() != ID()), <br>  * a tree view of tree nodes starting from Root() of the tree node. The current tree node has <b>dark blue</b> text.</td>
     <td>@figure{property_panel_tree_node.png, "",140} </td></tr>
-<tr><td><i>TDataStd_NamedData</i></td>
+<tr><td>TDataStd_NamedData</td>
     <td>tab bar of attribute elements, each tab has a table of [name, value]</td>
     <td>@figure{property_panel_named_data.png, "",140}</td></tr>
-<tr><td><i>TNaming_UsedShapes</i></td>
-    <td>a table of all shapes handled by the framework</td>
+<tr><td>TNaming_UsedShapes</td>
+    <td>a table of all  the shapes handled by the framework</td>
     <td>@figure{property_panel_tnaming_used_shapes.png, "",140}</td></tr>
-<tr><td><i>TNaming_NamedShape</i></td>
-    <td>2 controls: <br> - a table of [method name, value] including CurrentShape/OriginalShape methods result of <i>TNaming_Tools</i>, <br> - an evolution table. <br> Tables contain buttons for @ref occt_shape_export "TopoDS_Shape export".</td>
+<tr><td>TNaming_NamedShape</td>
+    <td>2 controls: <br>  * a table of [method name, value] including CurrentShape/OriginalShape methods result of TNaming_Tools, <br>  * an evolution table. <br> Tables contain buttons for @ref occt_shape_export "TopoDS_Shape export".</td>
     <td>@figure{property_panel_tnaming_named_shape.png, "",140}</td></tr>
-<tr><td><i>TNaming_Naming</i></td>
-    <td>2 controls: <br> - a table of <i>TNaming_Name</i> values,<br> - a table of [method name, value]</td>
+<tr><td>TNaming_Naming</td>
+    <td>2 controls: <br>  * a table of TNaming_Name vlaues,<br>  * a table of [method name, value]</td>
     <td>@figure{property_panel_tnaming_naming.png, "",140}</td></tr>
 </table>
 
 
 <b>Dump view</b>
 
-@figure{dump_attribute.png, "Dump of TDF_Attribute",200}
+@figure{dump_attribute.png, "Dump of TDF_Attribute"}
 
-Dump view shows the result of <b>TDF_Attribute::Dump()</b> or <b>TDF_Label::Dump()</b> of the selected tree view item.
+Dump view shows result of <b>TDF_Attribute::Dump()</b> or <b>TDF_Label::Dump()</b> of selected tree view item.
 
 <b>3D view</b>
 
-3D View visualizes *TopoDS_Shape* elements of OCAF attribute via AIS facilities.
+3D View visualizes TopoDS_Shape elements of OCAF attribute via AIS facilities.
 
-DFBrowser creates two kinds of presentations depending on the selection place:
+DFBrowser creates two kinds presentations depending on the selection place:
 
 <table>
-<tr><th>Kind</th><th>Source object</th><th>Visualization properties</th><th>View</th></tr>
+<tr><th>Kind</th><th>Source object</th><th>Visualization propeties</th><th>View</th></tr>
 <tr><td>Main presentation</td>
-    <td>Tree view item:<br> *TPrsStd_AISPresentation*,<br> *TNaming_NamedShape*,<br> *TNaming_Naming*</td>
-    <td>Color: a default color for shape type of the current *TopoDS_Shape*.</td>
+    <td>Tree view item:<br> TPrsStd_AISPresentation,<br> TNaming_NamedShape,<br> TNaming_Naming</td>
+    <td>Color: a default color for shape type of the current TopoDS_Shape</td>
     <td>@figure{display_main_presentation.png, "",100}</td></tr>
 <tr><td>Additional presentation</td>
     <td>References in Property panel</td>
@@ -168,8 +171,8 @@ DFBrowser creates two kinds of presentations depending on the selection place:
 <b>Tree Navigation</b>
 
 Tree Navigation shows a path to the item selected in the tree view.
-The path is a sequence of label entries and attribute type names.
-Each element in the path is selectable - simply click on it to select the corresponding tree view item.
+The path is a sequence of label entries and attribute type name.
+Each element in the path is selectable - the user can click on it to select the corresponding tree view item.
 
 Navigation control has buttons to go to the previous and the next selected tree view items.
 
@@ -181,14 +184,14 @@ Update button synchronizes content of tree view to the current content of OCAF d
 <b>Search</b>
 
 The user can search OCAF element by typing:
-  * *TDF_Label* entry,
-  * *TDF_Attribute* name,
-  * *TDataStd_Name* and *TDataStd_Comment* attributes value.
+  * TDF_Label entry,
+  * TDF_Attribute name,
+  * TDataStd_Name and TDataStd_Comment attributes value.
 
-@figure{search.png,"Search",360}
+@figure{search.png,"Search"}
 
 As soon as the user confirms the typed criteria, the Property panel is filled by all satisfied values.
-The user can click a value to highlight the corresponding tree view item. By double click the item will be selected.
+The user can click a value to hightligt the corresponding tree view item. By double click the item will be selected.
 
 
 @subsubsection occt_inspector_2_2_3 Elements cooperation
@@ -196,22 +199,22 @@ The user can click a value to highlight the corresponding tree view item. By dou
 <b>Tree item selection</b>
 
 Selection of tree view item updates content of the following controls:
-  * Navigation line;
-  * Property Panel;
-  * 3D View (if it is possible to create an interactive presentation);
-  * Dump View.
+  * Navigation line
+  * Property Panel
+  * 3D View (if it is possible to create an interactive presentation)
+  * Dump View
 
 @figure{dfbrowser_selection_in_tree_view.svg,"",360}
 
 <b>Property Panel item selection </b>
 
-If the property panel shows content of *TDF_Label*:
-  * selection of the table row highlights the corresponding item in the tree view,
-  * double click on the table row selects this item in the tree view.
+If property panel shows content of TDF_Label:
+  * selection of the table row hightlights the corresponding item in tree view,
+  * double click on the table row selects this item in tree view.
 
-If the property panel shows content of *TDF_Attribute* that has reference to another attribute, selection of this reference:
-  * highlights the referenced item in the tree view,
-  * displays additional presentation in the 3D view if it can be created.
+If property panel shows content of TDF_Attribute that has reference to another attribute, selection of this reference:
+  * highlights the referenced item in TreeView,
+  * displays additional presentation in 3D view if it can be created.
 
 @figure{property_panel_item_selection.svg,"",360}
 
@@ -219,28 +222,28 @@ Attributes having references:
 
 | Type | Reference | Additional presentation
 | :----- | :----- | :----- |
-| *TDF_Reference* | *TDF_Label* | |
-| *TDataStd_ReferenceArray*, <br> *TDataStd_ReferenceList*, <br> *TNaming_Naming* | One or several *TDF_Label* in a container. | |
-| *TDataStd_TreeNode* | *TDF_Label* | |
-| *TNaming_NamedShape* | *TDF_Label* in Evolution table |  *TopoDS_Shapes* selected in the property panel tables. |
-| *TNaming_UsedShapes* | one or several *TNaming_NamedShape* | *TopoDS_Shapes* of the selected *TNaming_NamedShape*. |
+| TDF_Reference | TDF_Label | |
+| TDataStd_ReferenceArray, <br> TDataStd_ReferenceList, <br> TNaming_Naming | one or several TDF_Label in a container | |
+| TDataStd_TreeNode | TDF_Label | |
+| TNaming_NamedShape | TDF_Label in Evolution table | selected TopoDS_Shapes in property panel tables |
+| TNaming_UsedShapes | one or several TNaming_NamedShape | TopoDS_Shapes of selected TNaming_NamedShape |
 
 
 @subsubsection occt_shape_export TopoDS_Shape export
 
-Property panel of *TNaming_NamedShape* attribute has controls to export *TopoDS_Shape* to:
-  * BREP. **Save file** dialog is open to enter the result file name,
-  * @ref occt_inspector_2_4 "ShapeView" plugin. The dialog for exporting element to ShapeView allows activating this plugin immediately.
+Property panel of TNaming_NamedShape attribute has controls to export TopoDS_Shape to:
+  * BREP. The save file dialog is started to enter the result file name,
+  * @ref occt_inspector_2_4 "ShapeView" plugin. Dialog about exporting element to ShapeView is shown with a possibility to activate this plugin immediatelly.
 
 
 @subsection occt_inspector_2_3 VInspector Plugin
 
 @subsubsection occt_inspector_2_3_1 Overview
 
-@figure{vinspector.png, "VInspector",360}
+@figure{vinspector.png, "VInspector"}
 
-This plugin visualizes interactive objects displayed in *AIS_InteractiveContext* in a tree view with computed selection
-components for each presentation. It shows the selected elements in the context and allows selecting these elements.
+It visualizes interactive objects displayed in AIS_InteractiveContext in a tree view with columputed selection
+components for each presentation. It shows the selected elements in the context and allows to select these elements.
 
 @subsubsection occt_inspector_2_3_2 Elements
 
@@ -248,85 +251,81 @@ components for each presentation. It shows the selected elements in the context
 
 <b>Presentations tree view</b>
 
-This view shows presentations and selection computed on them. Also, the view has columns with information about the state of visualization elements.
+It shows presentations and selection computed of them. Also, the view has columns with information about state of visualization elements.
 
 VInspector tree items.
 
 | Type | Description |
 | :----- | :----- |
-| *AIS_InteractiveContext* | The root of tree view. Its children are interactive objects obtained by *DisplayedObjects* and *ErasedObjects* methods.|
-| *AIS_InteractiveObject* | A child of *AIS_InteractiveContext* item. Its children are *SelectMgr_Selection* obtained by iteration on *CurrentSelection*.  |
-| *SelectMgr_Selection* | A child of *AIS_InteractiveObject*. Its children are *SelectMgr_SensitiveEntity* obtaining by iteration on *Sensitive*. |
-| *SelectMgr_SensitiveEntity* | A child of *SelectMgr_Selection*. Its children are *SelectMgr_SensitiveEntity* obtaining by iteration on *OwnerId*. |
-| *SelectBasics_EntityOwner* | A child of *SelectMgr_SensitiveEntity*. It has no children. |
+| AIS_InteractiveContext | It is the root of tree view. Children are interactive objects obtained by *DisplayedObjects* and *ErasedObjects* methods.|
+| AIS_InteractiveObject | It is a child of AIS_InteractiveContext item. Children are SelectMgr_Selection obtained by iteration on *CurrentSelection*  |
+| SelectMgr_Selection | It is a child of AIS_InteractiveObject. Children are SelectMgr_SensitiveEntity obtaining by iteration on *Sensitive* |
+| SelectMgr_SensitiveEntity | It is a child of SelectMgr_Selection. Children are SelectMgr_SensitiveEntity obtaining by iteration on *OwnerId* |
+| SelectBasics_EntityOwner | It is a child SelectMgr_SensitiveEntity. It has no children. |
 
 
 Custom color of tree view items:
 
 | OCAF element Type | Column | What | Color |
 | :----- | :----- | :----- | :----- |
-| *AIS_InteractiveObject* | 0 | Text | <b>dark gray</b> in *ErasedObjects* list of *AIS_InteractiveContext*,<br> <b>black</b> otherwise |
-| *AIS_InteractiveObject*, <br> *SelectMgr_SensitiveEntity*, <br> *SelectBasics_EntityOwner*| 1 | Background | <b>dark blue</b>, if there is a selected owner under the item, <br> <b>black</b> otherwise |
-| *SelectMgr_Selection*,<br> *SelectMgr_SensitiveEntity*,<br> *electBasics_EntityOwner* | all | Text | <b>dark gray</b>, if *SelectionState* of *SelectMgr_Selection* is not *SelectMgr_SOS_Activated*,<br> <b>black</b> otherwise |
+| AIS_InteractiveObject | 0 | Text | <b>dark gray</b>, it is in *ErasedObjects* list of AIS_InteractiveContext,<br> <b>black</b> otherwise |
+| AIS_InteractiveObject, <br> SelectMgr_SensitiveEntity, <br> SelectBasics_EntityOwner| 1 | Background | <b>dark blue</b>, if there is a selected owner under the item, <br> <b>black</b> otherwise |
+| SelectMgr_Selection,<br> SelectMgr_SensitiveEntity,<br> SelectBasics_EntityOwner| all | Text | <b>dark gray</b>, if *SelectionState* of SelectMgr_Selection is not *SelectMgr_SOS_Activated*,<br> <b>black</b> otherwise |
 
 
 Context popup menu in tree view:
 | Action | Item | Functionality |
 | :----- | :----- | :----- |
-| Export to ShapeView | *AIS_InteractiveObject* | Exports *TopoDS_Shape* of the *AIS_Interactive* presentation to ShapeView plugin. <br> It should be *AIS_Shape* presentation and ShapeView plugin should be registered in Inspector<br> Dialog about exporting element to ShapeView is shown with a possibility to activate this plugin immediately. |
-| Show | *AIS_InteractiveObject* | Displays presentation in *AIS_InteractiveContext*. |
-| Hide | *AIS_InteractiveObject* | Erases presentation from *AIS_InteractiveContext*. |
+| Export to ShapeView | AIS_InteractiveObject | Exports TopoDS_Shape of AIS_Interactive presentation to ShapeView plugin. <br> It should be AIS_Shape presentation and ShapeView plugin should be registered in Inspector<br> Dialog about exporting element to ShapeView is shown with a possibility to activate this plugin immediatelly. |
+| Show | AIS_InteractiveObject | *Display* presentation in AIS_InteractiveContext |
+| Hide | AIS_InteractiveObject | *Erase* presentation from AIS_InteractiveContext |
 
 <b>Update</b>
 
-This button synchronizes the plugin content with the current state of *AIS_InteractiveContext* and updates the presence of items and their current selection.
+It synchronizes content of the plugin to the current state of AIS_InteractiveContext.
+It updates the presence of items and the current selection for the items.
 
 <b>Selection controls</b>
 
-Selection controls switch on/off the possibility to set selection in the context from VInspector plugin.
+Selection controls switch on/off the posibility to set selection in the context from VInspector plugin.
 
 | Action | Tree view item | Functionality |
 | :----- | :----- | :----- |
-| Select Presentations | *AIS_InteractiveObject* | Calls *AddOrRemoveSelected* of interactive object for the selected item. |
-| Select Owners | *SelectMgr_EntityOwner* or <br> *SelectMgr_SensitiveEntity* | Calls *AddOrRemoveSelected* of *SelectMgr_EntityOwner* for the selected item. |
+| Select Presentations | AIS_InteractiveObject | Calls *AddOrRemoveSelected* of interactive object for the selected item |
+| Select Owners | SelectMgr_EntityOwner or <br> SelectMgr_SensitiveEntity | Calls *AddOrRemoveSelected* of SelectMgr_EntityOwner for the selected item |
 
-Please, note that the initial selection in the context will be cleared.
+Please note, that the initial selection in context will be cleared.
 If the button is toggled, the button selection is active. Only one button may be toggled at the moment.
 
 
 <b>History view</b>
 
-At present, the History view is under implementation and may be used only in a custom application where Inspector is loaded.
+At present the History view is under implementation and may be used only in a custom application where Inspector is loaded.
 
-To fill this view, *VInspectorAPI_CallBack* should be redefined in the application and send signals about some actions applied to the context.
-After that, the call back should be given as a parameter in the plugin.
+To fill this view, VInspectorAPI_CallBack should be redefined in the application and send signals about some actions applyed to context.
+After, the call back should be given as parameter in the plugin.
 If done, new items will be created in the history view for each action.
 
 @subsubsection occt_inspector_2_3_3 Elements cooperation
 
-*VInspector* marks the presentations currently selected in *AIS_InteractiveContext* with a blue background in tree items. Use **Update** button to synchronize VInspector selected items state to the context.
+Vinspector markes current selected presentations in AIS_InteractiveContext with blue background in tree items. Use "Update" button to synchronize VInspector selected items state to the context.
 
-It is also possible to perform selection in the context using "Selection controls" VInspector feature. However, this operation should be performed carefully as
-it clears the current selection in *AIS_InteractiveContext*.
+It is also possible to perform selection in context using "Selection controls" VInspector. However, it should be performed carefully as
+it clears the current selection in AIS_InteractiveContext.
 
 Selection change:
 | From | To | Action | Result |
 | :----- | :----- | :----- | :----- |
-| *AIS_InteractiveContext* | VInspector | Performs selection in *AIS_InteractiveContext*. | Click **Update** button in VInspector and check **Selection** column: <br> *AIS_InteractiveContext* item contains some selected objects, <br> the value of some *AIS_InteractiveObject* is filled if they are selected for this presentation or its entity owner. |
-| VInspector | *AIS_InteractiveContext* | Activates one of Selection controls and selects one or several elements in the tree view. | The objects become selected in *AIS_InteractiveContext*. |
-
-@subsubsection occt_inspector_2_3_4 VInspector tree view columns
-
-Use context pop-up menu on the tree view header to select, which columns should be displayed.
-@figure{vinspector_tree_columns.png, "Vinspector tree header context menu",360}
+| AIS_InteractiveContext | VInspector | perform selection in AIS_InteractiveContext | Click "Update" button in VInspector and check "Selection" column: <br> AIS_InteractiveContext item has anount of selected objects,<br> some of AIS_InteractiveObject have filled value if it selection happens for this presentation or entity owner of it |
+| VInspector | AIS_InteractiveContext | activate one of Selection controls and select one or several elements in tree view | The objects become selected in AIS_InteractiveContext |
 
 @subsection occt_inspector_2_4 ShapeView Plugin
 
 @subsubsection occt_inspector_2_4_1 Overview
 
-@figure{shapeview.png, "ShapeView",360}
+@figure{shapeview.png, "ShapeView"}
 
-This plugin visualizes content of *TopoDS_Shape* in a tree view.
+This plugin visualizes content of TopoDS_Shape in a tree view.
 
 @subsubsection occt_inspector_2_4_2 Elements
 
@@ -334,147 +333,99 @@ This plugin visualizes content of *TopoDS_Shape* in a tree view.
 
 <b>TopoDS_Shape View</b>
 
-The view elements are *TopoDS_Shape* objects.
-The shape is exploded into sub-shapes using *TopoDS_Iterator* of the *TopoDS_Shape*.
-Children sub-shapes are presented in the view as children of the initial shape.
-By iterating recursively through all shapes we obtain a tree view of items shown in the ShapeView.
+Elements of the view are TopoDS_Shape objects.
+This shape is exploded into sub-shapes using TopoDS_Iterator of the TopoDS_Shape.
+Child sub-shapes are presented in the view as children of the initial shape.
+Iterating recursively by all shapes we obtain a tree view of items shown in the ShapeView.
 
-The columns of the View show some information about *TopoDS_Shape* of the item.
-The first column allows changing the visibility of the item shape in the 3D view.
 
-Context pop-up menu in tree view:
+Columns of the View show some information about TopoDS_Shape of the item.
+The most informative column is the last column of TopoDS_Vertex and TopoDS_Edge shape types.
+
+For TopoDS_Vertex it contains the point coordinates,
+
+for TopoDS_Edge it contains the first and the last point coordinates, the edge length and some other parameters.
+
+
+Context popup menu in tree view:
 | Action | Functionality |
 | :----- | :----- |
-| Load BREP file | Opens the selected file and appends the resulting *TopoDS_Shape* into the tree view. |
-| Remove all shape items | Clears tree view. |
-| BREP view | Shows the text view with BREP content of the selected item. Creates the BREP file in a temporary directory of the plugin. |
-| Close All BREP views | Closes all opened text views. |
-| BREP directory | Displays the folder, where temporary BREP files have been stored. |
+| Load BREP file | Opens selected file and appends the result TopoDS_Shape into tree view |
+| Remove all shape items | Clears tree view |
+| BREP view | Shows text view with BREP content of the selected item. It creates BREP file in temporary directory of the plugin. |
+| Close All BREP views | Closes all opened text views |
+| BREP directory | Displays folder where temporary BREP files have been stored.  |
 
 @subsubsection occt_inspector_2_4_3 Elements cooperation
 
-Selection of one or several items in *TopoDS_Shape* View creates its *AIS_Shape* presentation and displays it in the 3D View.
+Selection of one or several items in TopoDS_Shape View creates AIS_Shape presentation for it and displays it in the 3D View.
 
-@subsubsection occt_inspector_2_4_4 ShapeView tree view columns
-
-Use context pop-up menu on the tree view header to select, which columns should be displayed.
-@figure{shapeview_tree_columns.png, "ShapeView tree header context menu",360}
 
 
 @section occt_inspector_3 Common controls
+@subsection occt_inspector_3_1 3D View
 
-@subsection occt_inspector_3_1 Tree View
+@subsubsection occt_inspector_3_1_1 Overview
 
-This control shows presentation hierarchy of the investigated OCCT element, e.g. *TDocStd_Application* for DFBrowser, see @ref occt_inspector_1_1 "Overview".
-The first column contains the name, other columns are informative.
+@figure{3DView.png, "3D View"}
 
-The tree view has a context menu with plugin-specific actions.
-
-@subsubsection occt_inspector_3_1_1 Tree View preferences
-
-It is possible to define visibility and width of columns.
-This option is available in a view that contains more than one column,
- e.g. @ref occt_inspector_2_3_4 "VInspector tree view columns"
- and @ref occt_inspector_2_4_4 "ShapeView tree view columns".
-
-@figure{treeview_preferences.svg, "Preferences schema",360}
+Control for OCCT 3D viewer. It creates visualization view components with possibilities to perform some
+user actions for the view.
 
 
-@subsection occt_inspector_3_2 3D View
+@subsubsection occt_inspector_3_1_2 Elements
 
-@subsubsection occt_inspector_3_2_1 Overview
+@figure{3DView_elements.svg,"3DView Elements"}
 
-@figure{3DView.png, "3D View",360}
-
-This control for OCCT 3D viewer creates visualization view components and allows performing some user actions in the view.
-
-
-@subsubsection occt_inspector_3_2_2 Elements
-
-@figure{3DView_elements.svg,"3DView Elements",360}
-
-3D View contains the following elements:
+3D View contains:
 | Element | Functionality |
 | :----- | :----- |
-| 3D view | V3d viewer with mouse events processing. |
-| Context | Allows choosing another context that should be used in the plugin. The following contexts are available:<br> **Own** - the context of this view, <br> **External** - the context of the @ref occt_inspector_4_3 "external application", which initializes the plugin, <br> **None** - the visualization is not performed at all (useful if the presentation is too complex). |
-| Multi/Single | The buttons define what to do with the previously displayed objects: <br> **Multi** displays new presentations together with already displayed ones, <br> **Single** removes all previously displayed presentations. |
-| Clean | Removes all displayed presentations. |
-| Fit All,<br> Fit Area,<br> Zoom,<br> Pan,<br> Rotation | Scene manipulation actions<br> (Fit All is checkable. If checked(by double click), display/hide of new objects will perform **Fit All** of the scene.) |
-| Display Mode | Sets *AIS_Shading* or *AIS_WireFrame* display mode for all presentations. |
-
-Context popup menu:
-| Action | Functionality |
-| :----- | :----- |
-| Set View Orientation | Shows the list of available *V3d_View* projections. Selection of an item with change the view. |
-
-@figure{3DView_set_orientation.png,"Set view orientation",360}
-
-@subsubsection occt_inspector_3_2_3 3D View preferences.
-View preferences store the current view orientation.
-
-@subsection occt_inspector_3_3 Preferences context menu
-
-@figure{preferences.png,"Plugin preferences",360}
-
-Context menu contains:
-| Element | Functionality |
-| :----- | :----- |
-| Tree Level Line,<br> PropertyPanel,<br> Dump, <br> View| Names of dock widgets in the active plugin. If the button is checked, dock widget is visible. |
-| Store Preferences | Creates ".tinspector.xml" preferences file with the current settings for each plugin.<br> This file is created in TEMP/TMP directory (by default) or in a user-defined directory. |
-| Remove Preferences | Removes preferences file. After the Inspector is restarted, default values will be applied. |
+| 3D view | V3d viewer with mouse events processing |
+| Context | choice of another context that should be used in the plugin. <br> It is possible to use the next contexts:<br> Own - context of this view, <br> External - context come in parameters which intializes plugin, <br> None - do not perform visualization at all |
+| Multi/Single | Buttons defined what to do with the previous displayed objects: <br> Multi displays new presentations in additional to already displayed, <br> Single removes all previuos displayed presentations |
+| Clean | Removes all displayed presentations |
+| Fit All,<br> Fit Area,<br> Zoom,<br> Pan,<br> Rotation | Scene manipulation actions |
+| Display Mode | Sets *AIS_Shading* or *AIS_WireFrame* display mode for all presentations |
 
 
-The following controls have store/restore preferences:
-| Element | Preferences |
-| :----- | :----- |
-| Geometry| Inspector window size and position. <br>State of dockable widgets : visibility, position, size.|
-| @ref occt_inspector_3_1_1 "Tree View preferences"| Columns visible in the tree view and their width. |
-| @ref occt_inspector_3_2_3 "3D View preferences"| 3D view camera direction. |
+@section occt_inspector_6 TInspectorEXE sample
 
-@section occt_inspector_4 Getting Started
+Inspector functionality can be tried using this sample.
 
-@subsection occt_inspector_4_1 TInspectorEXE sample
+Use *inspector.bat* script file placed in binary directory of OCCT to launch it.
 
-This sample allows trying Inspector functionality.
-
-Use *inspector.bat* script file placed in a binary directory of OCCT to launch it.
-
-This script accepts the names of plugin's DLL that should be loaded. By default it loads all plugins described above.
+This script accepts the names of plugin's DLL that should be loaded. By default it loads all described above plugins.
 
 
-@figure{TStandaloneEXE.png, "TStandaloneEXE",360}
+@figure{TStandaloneEXE.png, "TStandaloneEXE"}
 
-Click on the Open button shows the dialog to select a file.
-@figure{TStandaloneEXE_open.png, "",360}
+Click on the Open button shows the dialog to select a file. The user is able to select one of the sample files or load own one.
+@figure{TStandaloneEXE_open.png, ""}
 
-Depending on the active plugin, it is possible to select the following files in the dialog:<br>
-- DFBRowser: OCAF document or STEP files;
-- VInspector: BREP files;
-- ShapeView: BREP files.
+Depending on the active plugin, the following files should be selected in the dialog:
+OCAF document or STEP files for DFBRowser and BREP files for VInspector and ShapeView plugins.
 
-Click the file name in the proposed directory and enter it manually or using **Browse** button.
+It is possible to click the file name in the proposed directory, enter it manually or using Browser button.
+The last Loading icon becomes enabled if file name is correct.
 
-By default, TInspectorEXE opens the following files for plugins:
+
+By default TInspectorEXE opens the next files for plugins:
 | Plugin DLL library name | Files |
 | :----- | :----- |
 | TKDFBrowser | step/screw.step |
 | TKVInspector | occ/hammer.brep |
 | TKShapeView | occ/face1.brep, <br> occ/face2.brep |
 
-These files are found relatively to *CSF_OCCTDataPath*.
+These files are found relatively *CSF_OCCTDataPath*.
 
-@subsubsection occt_inspector_4_1_1 TInspectorEXE preferences
-The application stores recently loaded files. On the application start, the last file is activated.
-**Open file** dialog contains recently loaded files.
-Selection of a new file updates the container of recently loaded files and rewrites preferences.
 
-Source code of *TIspectorEXE* is a good sample for @ref occt_inspector_4_3 "using the Inspector in a custom application".
+Source code of TIspectorEXE is a good sample for @ref occt_inspector_8 "Using Inspector in a custom application".
 
-@subsection occt_inspector_4_2 How to launch the Inspector in DRAW Test Harness
 
-*TKToolsDraw* plugin provides DRAW commands for Qt tools. Use *INSPECTOR* parameter of @ref occt_draw_1_3_3 "pload" 
-command to download the commands of this library. It contains *tinspector* command to start Inspector under DRAW.
+@section occt_inspector_7 Launch in DRAW Test Harness
+
+TKToolsDraw plugin is created to provide DRAW commands for Qt tools. Use INSPECTOR parameter of @ref occt_draw_1_3_3 "pload" 
+command to download commands of this library. It contains tinspector command to start Inspector under DRAW.
 See more detailed description of the @ref occt_draw_13_1 "tinspector" command.
 
 The simple code to start Inspector with all plugins loaded:
@@ -484,31 +435,26 @@ pload INSPECTOR
 tinspector
 ~~~~~
 
-@figure{drawexe_tinspector.png,"tinspector",360}
+@figure{drawexe_tinspector.png,"tinspector"}
 
-This command does the following:
-- all available Plugins are presented in the Inspector. These are @ref occt_inspector_2_2 "DFBrowser", @ref occt_inspector_2_3 "VInspector" and  @ref occt_inspector_2_4 "ShapeView";
-- DFBrowser is the active plugin;
-- OCAF tree is empty.
+Result of this command is the next:
+- all available Plugins are presented in the Inspector. These are @ref occt_inspector_2_2 "DFBrowser", @ref occt_inspector_2_3 "VInspector" and  @ref occt_inspector_2_4 "ShapeView".
+- DFBrowser is an active plugin
+- tree of OCAF is empty.
 
-After this, we should create objects in DRAW and update *tinspector*.
-The examples of using Inspector in DRAW can be found in OCCT source directory /tests/tools.
+After, we should create objects in DRAW and update tinspector.
 
-@subsection occt_inspector_4_3 How to use the Inspector in a custom application
+@section occt_inspector_8 Using in a custom application
 
-The example of using the Inspector in a custom application is presented in OCCT qt sample - <b>FuncDemo</b>.
-For building qt samples, switch on *BUILD_SAMPLES_QT* variable in @ref build_cmake_conf "Configuration process".
-
-In general, the following steps should be taken:
-* Set dependencies to OCCT and Qt in the application (Header and Link);
-* Create an instance of *TInspector_Communicator*;
-* Register the plugins of interest in the communicator by DLL library name;
-* Initialize the communicator with objects that will be investigated;
-* Set visible true for the communicator.
+To use Inspector in an application, the next steps should be done:
+* Set dependencies to OCCT and Qt in application (Header and Link)
+* Create an instance of TInspector_Communicator.
+* Register plugins of interest in the communicator by DLL library name
+* Initialize communicator with objects that will be investigated
+* Set visible true for commumicator
 
 
-
-Here is an example of C++ implementation:
+C++ code is similar:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.cpp}
 
 #include <inspector/TInspector_Communicator.hxx>
@@ -533,56 +479,100 @@ void CreateInspector()
   }
   MyTCommunicator->SetVisible (true);
 }
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Give one the following objects for a plugin using a container of parameters:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 | Plugin | to be initialized by |
 | :----- | :----- |
-| *TKDFBrowser* | *TDocStd_Application* |
-| *TKVInspector* | *AIS_InteractiveContext* |
-| *TKShapeView* | *TopoDS_TShape* |
+| TKDFBrowser | TDocStd_Application |
+| TKVInspector | AIS_InteractiveContext |
+| TKShapeView | TopoDS_TShape |
 
 
-@section occt_inspector_5 Build procedure
 
-
-@subsection occt_inspector_5_1 Building with CMake within OCCT
+@section occt_inspector_4 Build procedure
 
 By default the Inspector compilation is off.
-To compile it, set the *BUILD_Inspector* flag to "ON". See @ref build_cmake_conf "Configuration process".
+To compile it, set the <b>BUILD_Inspector</b> flag to "ON". See @ref build_cmake_conf "Configuration process".
 
-When this option is switched ON, MS Visual Studio project has an additional tree of folders:
+When this option is switched On, MS Visual Studio project has an additional tree of folders:
 
-@figure{VStudio_projects.png,"Inspector packages in MS Visual Studio",160}
+@figure{VStudio_projects.png,"Inspector packages in MS Visual Studio"}
 
 
-@section occt_inspector_6 Sources and packaging
+@section occt_inspector_5 Sources and packaging
 
 OCCT sources are extended by the /tools directory.
 
-Distribution of plugin packages :
-| Source packages | Plugin |
+Distribution of packages participated in plugins:
+| Sources packages| Plugin |
 | :----- | :----- |
-| *DFBrowser*, <br> *DFBrowserPane*, <br> *DFBrowserPaneXDE*, <br> *TKDFBrowser* | DFBrowser |
-| *VInspector*, <br> *TKVInspector*  | VInspector |
-| *ShapeView*, <br> *TKShapeView* | ShapeView |
+| DFBrowser, <br> DFBrowserPane, <br> DFBrowserPaneXDE, <br> TKDFBrowser | DFBrowser |
+| VInspector, <br> TKVInspector  | VInspector |
+| ShapeView, <br> TKShapeView | ShapeView |
 
 Other packages:
-| Source packages| Used in |
+| Sources packages| Used in |
 | :----- | :----- |
-| *TInspectorAPI*, <br> *TKInspectorAPI* | Interface for connection to plugin. |
-| *TreeModel*, <br> *TKTreeView* | Items-oriented model to simplify work with GUI tree control. |
-| *View*, <br> *TKView* | 3D View component. |
-| *TInspector*, <br> *TKTInspector*  | Inspector window, where plugins are placed. |
-| *ToolsDraw*, <br> *TKToolsDraw* | Plugin for DRAW to start Inspector. |
+| TInspectorAPI, <br> TKInspectorAPI | Iterface for connection to plugin. |
+| TreeModel, <br> TKTreeView | Items-oriented model to simplify work with GUI tree control. |
+| View, <br> TKView | 3D View component |
+| TInspector, <br> TKTInspector  | Inspector window where plugins are placed |
+| ToolsDraw, <br> TKToolsDraw | Plugin for DRAW to start Inspector |
 
 
-In MSVC studio, a separate folder contains Inspector projects.
+In MSVC studio the separate folder contains Inspector projects.
 
-@section occt_inspector_7 Glossary
-* **Component** -- a part of OCCT , e.g. OCAF, VISUALIZATION, MODELING and others. 
-* **Plugin** -- a library that is loaded in some executable/library. Here, the plugins are:
+@section occt_inspector_9 Glossary
+* **Component** -- OCCT part, e.g. OCAF, VISUALIZATION, MODELING and others. 
+* **Plugin** -- library that is loaded in some executable/library. Here, the plugins are:
   * DFBrowser,
   * ShapeView,
   * VInspector.
+
+@subsection occt_attribute_simple_types TDF_Attribute Simple types
+Types where the content is a single value
+
+| Type | Kind of value |
+| :----- | :----- |
+| TDataStd_AsciiString | TDataStd_AsciiString |
+| TDataStd_Comment | TCollection_ExtendedString |
+| TDataStd_Integer | Standard_Integer |
+| TDataStd_Name | TCollection_ExtendedString |
+| TDataStd_Real | Standard_Real |
+| TDF_Reference | TDF_Label |
+| TDF_TagSource | Standard_Integer |
+
+
+@subsection occt_attribute_list_types TDF_Attribute List types
+
+| Type | Kind of value (container of) |
+| :----- | :----- |
+| TDataStd_BooleanList | Standard_Boolean |
+| TDataStd_ExtStringList | TCollection_ExtendedString |
+| TDataStd_IntegerList | Standard_Integer |
+| TDataStd_RealList | Standard_Real |
+| TDataStd_ReferenceList | TDF_Label |
+
+@subsection occt_attribute_array_types TDF_Attribute Array types
+
+| Type | Kind of value (container of) |
+| :----- | :----- |
+| TDataStd_BooleanArray | Standard_Boolean |
+| TDataStd_ByteArray | Standard_Byte |
+| TDataStd_ExtStringArray | TCollection_ExtendedString |
+| TDataStd_IntegerArray | Standard_Integer |
+| TDataStd_RealArray | Standard_Real |
+| TDataStd_ReferenceArray | TDF_Label |
+
+@subsection occt_attribute_xde_tree_node_id XDE tree node ID description
+| GUID | Text |
+| :----- | :----- |
+| XCAFDoc::ShapeRefGUID() | Shape Instance Link |
+| XCAFDoc::ColorRefGUID (XCAFDoc_ColorGen) | Generic Color Link |
+| XCAFDoc::ColorRefGUID (XCAFDoc_ColorSurf) | Surface Color Link |
+| XCAFDoc::ColorRefGUID (XCAFDoc_ColorCurv) | Curve Color Link |
+| XCAFDoc::DimTolRefGUID() | DGT Link |
+| XCAFDoc::DatumRefGUID() | Datum Link |
+| XCAFDoc::MaterialRefGUID() | Material Link |
+