OpenGl_ShaderManager::stdComputeLighting() - handle single directional light specifically
for compatibility with broken OpenGL ES drivers.
Added test cases using built-in GLSL shading programs.
When reducing the tolerance values of the vertices put on section curves take into
account all section curves, not only those for which the tolerance have been reduced
(method void BOPAlgo_PaveFiller::CorrectToleranceOfSE()).
The new protection has been added to avoid reducing of tolerance values of vertices
to the values less than the tolerance values of edges containing these vertices.
Adjusting of test case bugs/modalg_5/bug25232_9
- method SelectMgr_SelectableObject::HasSelection became virtual, unnecessary variable was removed;
- redefined HasSelection method for multiple connected interactives;
- AIS_InteractiveContext::AddOrRemoveSelected was corrected to use global selection owner;
- test case for issue #27285
The map to protect the result of Boolean operation from duplicating parts in containers has been removed (method void BOPAlgo_BOP::BuildShape()).
The results of Boolean operations on containers will be the following:
1. For the arguments of collection type (WIRE, SHELL, COMPSOLID) containing overlapping parts the overlapping parts
passed into result will be repeated for each container from the input shapes containing such parts.
2. The result of the operation Fuse for the arguments of collection type (WIRE, SHELL, COMPSOLID) will contain
the same number of containers as the arguments. The overlapping parts (EDGES/FACES/SOLIDS) will be shared among them.
For example, the result of Fuse operation between two wires will be two wires sharing coinciding edges if any.
3. The result of the operation Common for the arguments of collection type (WIRE, SHELL, COMPSOLID) will consist
of the containers containing the same overlapping parts. For example, the result of Common operation between two
fully/partially overlapping wires will be two wires containing the same edges.
Style correction.
Added test case bugs/modalg_1/bug13538
Modified boolean test cases according to new begavior
Possibility to customize layout of installation of OCCT is introduced by:
- variable INSTALL_DIR_LAYOUT - select one of the two predefined layouts: either Windows (classic OCCT layout) or Unix (Linux standard)
- variables INSTALL_DIR_* (BIN, LIB, INCLUDE, RESOURCE, DOC, TESTS, SCRIPT, SAMPLES, DATA) - specify locations of relevant components
- variable INSTALL_DIR_WITH_VERSION (bool) - specifies whether full version of OCCT should be used in paths in Unix layout
Files LICENSE_LGPL_21.txt and OCCT_LGPL_EXCEPTION.txt are always installed.
Environment is extended to support non-default layouts.
For that, environment variables "CSF_OCCT*Path" are defined, corresponding to CMake variables INSTALL_DIR_* described above.
Visual Studio environment, DRAW, tests, samples are amended to use these variables instead of (or as alternative to) CASROOT.
Settings of Products-specific vars are removed from environment scripts.
File genconf.bat was corrected to avoid error message for the case when path to TCL contains spaces.
Product name in rc files changed to "Open CASCADE Technology".
1. Protection against getting access to null-handle has been entered.
2. Function AreSamePoints() has been substituted by appropriate method IntSurf_PntOn2S::IsSame(...)
Test cases for issues #27262 and #27263 have been created.
1. Processing when IntPatch_WLine/IntPatch_RLine goes through the seam edge has been improved in DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx).
2. Incorrect initialization of last point of IntPatch_WLine/IntPatch_RLine has been eliminated. Earlier it was the reason of exception.
Creation of test case for this issue.
Adjusting some test cases according to their new behavior. Namely:
1) tests\bugs\modalg_4\bug825 (bug825_2)
Details are described in issue #25915. In short, new intersection algorithm works better than old (WLine without "jumping"). However, Boolean operation loses degenerated edges of the sphere. Consequently, we get the result with Not-closed face.
2) tests\bugs\modalg_6\bug26684_2
TolReached of intersection curve has become smaller. Consequently, intersection algorithm works better than earlier.
Calling IntPatch_WLineTool::ComputePurgedWLine() algorithm is forbidden if Walking-line is obtained from analytic line.
Creation of test case for this issue.
Added test case that works in one of two modes:
1) create synthetic document (in old version of OCCT) containing all possible attributes.
2) open the document and compare all attributes with expected values.
Fixed reading of TDataStd_NamedData, TDataXtd_PatternStd, and PColStd_HArray2OfReal.
Point and curve representations are created even from NULL geometry handles.
The code is simplified by abandoning usage of templates from StdObjMgt_ContentTypes class for persistent data elements.
Fixed SetAsciiString Draw command failed when the target label contained NamedData attribute.
Possibility to read shapes and OCAF documents from old persistence format (Std and StdL schema) is restored.
Test cases used old persistent files on input are restored with suffix "_std"
Removing toolkit from OS package
Method StlAPI_Writer::Write() is reimplemented to write triangulation directly, without conversion to StlMesh_Mesh.
New DRAW command "tessellate" is added to generate rapidly triangulation of prescribed size (on surface).
Command "tricheck" is protected to deal correctly with triangulation without UV data.
New tests added: perf de bug26338_1 and _2; bugs stlvrml bug26338
Correction of testing environment
The main reason of the bug is incorrect check, if the edge is seam-edge or not.
In the fix it is determined with new methods in GeomLib class.
The bug is fixed.
Creation of test case for this fix
Small correction in the code
Operator of cast to non-const reference is declared deprecated to produce compiler warning if used (usually implicitly).
OCCT code is updated to avoid that cast, occurring when function accepting non-const reference to handle is called with handle to derived type.
For that, local variable of argument type is passed instead, and down-cast is used to get it to desired type after the call.
A few occurrences of use of uninitialized variable are corrected.
ShapeAnalysis_Surface is improved to use adaptor for evaluation of points on a surface.
Useless field myExtSur is removed.
DE tests are amended according to induced changes (number of edges varied).
Lipchitz constant approximation and fixes in global optimization algorithm added to improve performance.
Test case added.
Possibility to freeze Lipchitz constant is added to improve performance.
Use std::mt19937 random number generator instead of rand() in NCollection_UBTreeFiller.
boolean gdml_private ZI7 ZJ7 - TODO "bopcheck failed" is only for Linux now, checkshape faulty is unstable (issue #27052)
boolean volumemaker B6 - Added TODO (bopcheck and checkshape faulties)
boolean volumemaker C9 - Added TODO (checkprops and checkshape faulties)
boolean volumemaker D2 - Added TODO (checkshape faulty)
boolean volumemaker H4 - Added TODO (checkprops and checkshape faulties Linux only)
boolean volumemaker D5 - IMVPROVEMENT, TODOs were deleted (bopcheck and checkshape faulties)
bugs modalg_1 buc60462_2 - modified TODOs according to new behavior
boolean gdml_private ZI7 ZJ7 - unstable case, added check for surface area and TODO
samples/tcl/ANC101.tcl - amended due to changed order of edges in BOP result
Two new sample scripts added, modeling classic shapes from used for comparing modeling systems in 1979 and again in 1983 by Computer Aided Manufacturing International (CAM-I).
BRepMesh_CircleTool: extend radius of circle by quite small value in order to classify points forming inscribed triangle as lying on it. Do not use PConfusion due to false positive result leading algorithm to hanging.
Small correction in test cases bugs/mesh/bug27119
Update of test cases according to the new behavior:
bugs/moddata_1/bug22759
mesh/data/standard/M4
Virtual method Generated() inherited from BRepPrimAPI_MakeSweep is overridden in class BRepOffsetAPI_MakePipe, providing information on shapes generated from the profile.
1. Step of Walking-line has been increased as possible and now computes by iteratively adaptive algorithm (every iteration checks if current step is too big/small and decreases/increases one).
2. Interface of IntWalk_PWalking class has been changed
2.1. Method MaxStep() has been added in order to know about maximal distance between 2D-points.
2.2. Method ComputePasInit(...) has been added in order to initial step value computation.
2.3. Fields myTolTang (tolerance for intersection algorithm) and myStepMin (minimal step value) have been added.
Correction of some test cases.
Creation test case for this issue.
Changes to eliminate compiler warnings.
Extrema Curve / Surface algorithm changed to perform more accurate search.
test case bug25232_8 - improvement, one additional intersection point is detected now.
test case bug23830 - normal behavior, position of extrema is changed.
test case for original issue added.
Method BRepGProp::LinearProperties() is corrected to treat not geometric edges (their length is zero). To avoid wrong working of command nexplode global properties are calculated as point properties of vertexes. Small value Epsilon(1.) is used as density of points. This prevents exception on shapes that contain such edges, e.g. copy of a wire containing degenerated edge.
Method BRep_Tool::IsGeometric() is optimized to avoid nested iteration for check of 3D curve for Null.
Small bug is fixed in GProp_PGProps.cxx
Useless variable MAXTOLERANCEGEOM is removed in order to allow to place point at any distance from curve/surface.
Algorithm is simplified: particular calculations for analytical geometry are removed, only using of Extrema_... is kept.
Test case for issue #27110
checkdump - procedure to parse output dump and compare it with reference values;
checklength - procedure to compute length of input shape.
Added procedures and modified test group geometry.
1. Disable recalculation of B-spline cache when the parameter is out of surface boundary but near the cached span.
2. Rebuild cache each time a curve/surface is loaded into adaptor (B-spline knots may be re-parametrized outside adaptor without changing base curve)
3. Test cases.
