Graphic3d_StereoMode - add new enumeration for stereoscopic outputs:
- Graphic3d_StereoMode_QuadBuffer
- Graphic3d_StereoMode_Anaglyph
- Graphic3d_StereoMode_RowInterlaced
- Graphic3d_StereoMode_ColumnInterlaced
- Graphic3d_StereoMode_ChessBoard
- Graphic3d_StereoMode_SideBySide
- Graphic3d_StereoMode_OverUnder
Graphic3d_RenderingParams - add new options controlling stereo output:
- StereoMode
- ToReverseStereo
- AnaglyphFilter
OpenGl_ShaderManager - add predefined GLSL programs for new stereo outputs.
OpenGl_Workspace::Redraw() - do not implicitly disable stereo to allow stereo dump as is.
OpenGl_Caps - add flag swapInterval to control VSync.
OpenGl_Workspace::BufferDump() - handle cases with non-applicable GL_PACK_ROW_LENGTH.
CALL_DEF_WINDOW - drop unused fields; add fields "left" and "top"
to reverse stereo pair for interlaced output depending on window position.
Draw Harness, ViewerTest:
- Extend syntax of command vstereo to setup stereo.
- Extend vdump command to allow dump of stereoscopic pair in different formats.
- Extend command vcaps with option vsync.
- Use mouse scroll to zoom and adjust ZFocus in WinAPI.
- Use "/" and "*" to adjust IOD.
v3d/glsl/stereo - add test case for stereo modes.
Cocoa_LocalPool, OSD_EnvironmentIterator - fix compilation issues on OS X Snow Leopard.
Upgrade method of computing vertex tolerance.
Update function, which used the old method.
Test case for issue CR26241
Delete obsolete variables.
Small correction of test cases for issue CR26241
OpenGl_LineAttributes - drop display lists for stipple lines.
OpenGl_Context - add methods OpenGl_Context::SetTypeOfLine() and OpenGl_Context::SetLineWidth() to setup line aspects.
OpenGl_ShaderManager::prepareStdProgramFlat() - support new bit OpenGl_PO_StippleLine.
vaspects command - add -setlinetype option.
Corrected array boundaries to avoid Standard_OutOfRange exception in BSplSLib and BSplSLib_Cache on the given shapes.
Code formatting has been corrected for ShapeFix_Edge.
1. Methods IntPolyh_MaillageAffinage::GetMinDeflection() and IntPolyh_MaillageAffinage::GetMaxDeflection() have been created (see cdl-file for more detail information).
2. Extended check, if starting point of WLine is a tangent point, has been implemented in IntWalk_PWalking::Perform(...) method.
Test cases for issue CR26151
OpenGl_Workspace::updateMaterial() - do not activate writing into Depth buffer without Graphic3d_ZLayerDepthWrite flag.
Add method OpenGl_Workspace::UseDepthWrite() to track glDepthMask() state.
Drop the following outdated API methods conflicting with Z-layers API:
- V3d_View::EnableDepthTest(), V3d_View::IsDepthTestEnabled()
- Visual3d_View::ZBufferIsActivated(), Visual3d_View::SetZBufferActivity(), Visual3d_View::EnableDepthTest(), Visual3d_View::IsDepthTestEnabled()
- Graphic3d_GraphicDriver::SetDepthTestEnabled(), Graphic3d_GraphicDriver::IsDepthTestEnabled()
Activate Z-buffer by default, and manage it state only by Z-layer flags.
Classifier has been corrected to not take into account a probing point if the probing line appears to be tangent to the boundary at this point.
But allow to use tangent point if all points on the edge are tangent.
Modify bad test cases.
Test case for issue CR26206
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Projection is considered as done only if parameter projected point falls within the current interval of parameters.
In the Approx_SameParameter considering tolerance after static method ProjectPointOnCurve was added.
In BRepAlgoAPI_Sewing catch of exception was added and computation of tolerance of edge if same parameter was changed in according to check in BRepCheck_Analyzer
In method Approx_SameParameter::Build() for case when 2D and 3D curves is not same parameter calculation of maximal deviation is modified by following way :
Modification in order to avoid warning
Test case for issue CR24357
1. Conditions for adjusting and for breaking Walking-lines have been amended.
2. Processing of case when WLine should be broken has been changed.
Test cases for issues 26193 and 26208 have been added
Cosmetic correction of test-cases
Modification of test-case according to the new behavior.
Replace BOPCol_MapOfShape by BOPCol_IndexedMapOfShape to provide
the same order of shells in the result
Test case for issue CR26253
Correction of test case for issue CR26253
A tool to remove tails from the wires of a shape was created.
The tool is based on mechanism 'ShapeFix',
is located in types 'ShapeFix_Wire' and 'ShapeAnalysis_Wire',
is enabled through method 'ShapeFix_Wire::FixTailMode' and
is initialized by methods 'ShapeFix_Wire::SetMaxTailAngle' and 'ShapeFix_Wire::SetMaxTailWidth' and
is called through method 'ShapeFix_Wire::FixTails'.
The status of any performing of the last method is accessible through method 'ShapeFix_Wire::StatusFixTails'.
The tail angle is checked only at the tail start.
Mechanism 'ShapeFix' was modified:
- the tool is disabled by default;
- algorithm 'Fix notched edges' is disabled then the tool is enabled;
- the tool and the last algorithm work in turns then the tool works on the request.
'Draw' command 'fixshape' was extended by options '-maxtaila' and '-maxtailw' to test the tool.
'Draw' tests to test the tool were created.
Algorithm 'fixshape' was changed in type 'ShapeProcess_OperLibrary' to
- use new parameters named 'FixTailMode', 'MaxTailAngle' (in degrees) and 'MaxTailWidth' from the algorithm context;
- apply the tool after the shape will be fully fixed if the tool was enabled.
Place holders for the new parameters were created in the resource file of mechsnism 'STEPControl_Reader'.
Test cases for issue CR26261
Additional option '-full' was added to 'Draw' commands 'lprops', 'sprops' and 'vprops'
to output the values not only with the short but and with the full precision.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
Changes:
class BOPTest
- static function:
Standard_Integer checkcurveonsurf(Draw_Interpretor& di,
Standard_Integer n,
const char** a)
has been changed.
The condition that provides selection of faulty curves has been modified
to be coherent with the same condition in class BOPAlgo_Analyzer.
