I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
Computing is unified. ComputeFastTol3d() method was deleted.
If intersection result contains 3D- and corresponded two 2D-curves then tolerance will be computed with using BRepLib_CheckCurveOnSurface algorithm (check same-parameter).
If intersection result contains only 3D-curve (getting 2D-curve can be switched off by users) then tolerance will be computed with using GeomAPI_ProjectPointOnSurf algorithm (projects some point of 3D-curve on the surface and finds maximal distance).
Some workarounds have been deleted.
Some test case have been changed.
1. JoinWLines algorithm has been improved.
2. Reference to the V-boundaries is deleted when computing step.
3. Decreasing the tolerance when computing parameters of WLine.
4. Adding boundary point is forbidden if it lies in prolongation of found ones.
5. Possible reason of exception has been eliminated.
6. Processing of critical point has been improved.
Test cases for this issue have been created.
Correction of some test case(s).
Test case bugs/modalg_6/bug26310_4 is added
Update of test-cases for issue #26310
C2 continuity intervals changed to Knots intervals in case of Bspline curve.
Fixed incorrect extremaPC usage.
Test case for issue CR26351
Update of test-cases according to the new behavior
Upgrade method of computing vertex tolerance.
Update function, which used the old method.
Test case for issue CR26241
Delete obsolete variables.
Small correction of test cases for issue CR26241
1. Conditions for adjusting and for breaking Walking-lines have been amended.
2. Processing of case when WLine should be broken has been changed.
Test cases for issues 26193 and 26208 have been added
Cosmetic correction of test-cases
Modification of test-case according to the new behavior.
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
All uses of "MDTV-Standard" and "MDTV-Design" in tests changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
Formats changed: .std to .cbf, .dxc to .dbf.
Test groups renamed accordingly:
xcaf: brep_to_dxc -> brep_to_xbf, igs_to_dxc -> igs_to_xbf, stp_to_dxc -> stp_to_xbf, dxc -> xbf/A1, dxc_add_CL -> xbf_add_CL
xml: ocaf_std -> ocaf_cbf, xcaf_dxc -> xcaf_xbf
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
1. Unification of the polygons creation (it is regardless of arguments order).
2. Output of 2dintersect DRAW-command was changed.
3. Geom2dGcc_Circ2d2TanRadGeo.cxx:
Precise intersection point found by Extrema Curve-Curve method (dot product between every tangent vector and vector between points on two curves must be equal to zero).
4. Some comments have been translated from French to English.
Some test case have been updated.
Changes in accordance with the last remark
Test case for issue CR25593
1. Algorithm of aStepU1 computing was changed.
2. Interface to allow convert gp_XY(Z) to the math_Vector has been added.
3. Algorithm of point in V-boundaries computing has been changed.
4. Situation when intersection line walks along V-boundary of cylinder(s) is processed better.
5. Intersection lines are created with their individual step along U1 parameter.
6. Points processing has been moved to the assembly level.
7. Extend output of "bfuseblend" and "bcutblend" DRAW-command.
8. New option for "bfuseblend" and "bcutblend" command has been added.
Update Test cases
Test cases for issue CR25742
New features:
class BOPTools_AlgoTools2D
- method
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const BRepAdaptor_Surface& aBAS,
const Standard_Real aFirst,
const Standard_Real aLast,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
has been added.
The method uses the refetence to BRepAdaptor_Surface object as parameter.
The fact allows to avoid redundant computations such as
BRepTools::UVBounds(....)
Changes:
class BOPTools_AlgoTools2D
- method:
void BOPTools_AlgoTools2D::AdjustPCurveOnFace
(const TopoDS_Face& aF,
const Standard_Real aT1,
const Standard_Real aT2,
const Handle(Geom2d_Curve)& aC2D,
Handle(Geom2d_Curve)& aC2DA)
has been changed.
The changes are to provide the consistency with I.1
- method:
void BOPTools_AlgoTools2D::MakePCurveOnFace
(const TopoDS_Face& aF,
const Handle(Geom_Curve)& aC3D,
const Standard_Real aT1,
const Standard_Real aT2,
Handle(Geom2d_Curve)& aC2D,
Standard_Real& TolReached2d)
has been changed.
The changes are to provide the consistency with I.1
The restricted surface is used as data for the projection algorithm.
Test case for CR25982
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
Class IntTools_FClass2d
method:void IntTools_FClass2d::Init(const TopoDS_Face& aFace,const Standard_Real TolUV)
has been changed.
The cases where derivattive angles that are near to PI are considered as a sign to avoid express treatment for that wire
Test case for CR25969
1. Restriction line is processed in IntTools_FaceFace with using methods of GeomInt_IntSS class.
2. Check, if Restriction- and Walking-lines (or Restriction-Restriction lines) are coincided, has been added in IntPatch_ImpPrmIntersection.cxx (at that RLine is considered to be isoline only).
3. Check, if RLine and GLine are coincided, has been added in IntPatch_ImpImpIntersection.cxx.
4. Create new class IntPatch_PointLine, which is inherited from IntPatch_Line.
5. The reason of exception (in DEBUG MODE) has been eliminated.
New test cases for issue #25416 were added.
tests/bugs/modalg_5/bug24650 was modified.
Changes:
class IntTools_FaceFace
- method:
void IntTools_FaceFace::Perform(const TopoDS_Face& aF1,
const TopoDS_Face& aF2)
The treatment of infinite planes was corrected.
Test case for issue CR25818
I. New features:
No new features.
II. Changes:
II.1. class BOPAlgo_PaveFiller
- method:
void BOPAlgo_PaveFiller::PerformEE()
has been changed.
Intended set of VE interferences has been refined
to avoid unwanted overlaps of pave blocks
- method:
void BOPAlgo_PaveFiller::ForceInterfVE(const Standard_Integer nV,
Handle(BOPDS_PaveBlock)& aPB,
BOPDS_MapOfPaveBlock& aMPBToUpdate)
The initialization of increment of VE interferences has been added.
- method:
Standard_Boolean BOPAlgo_PaveFiller::ForceInterfVF
(const Standard_Integer nV,
const Standard_Integer nF)
The initialization of increment of VF interferences has been added.
III. Modified entities:
packages:
BOPAlgo
Test case for issue CR25847
Handling of degenerated parametrization (like sphere) added in IWalker.
Minor corrections.
Test case for issue CR25842
Correction of test case for issue CR25842
If Walking-lines are coincided we kept line, which contains more points or has more length (because it is more precisely, most likely).
Test cases for issue CR25828
Some test cases were changed
1. class BOPAlgo_PaveFiller
method void BOPAlgo_PaveFiller::PerformEF()
Do not create intersection vertices in case if it lies ON the boundary of the face.
2. class IntTools_Context
New method
Standard_Boolean IntTools_Context::IsPointInFace
(const gp_Pnt& aP,
const TopoDS_Face& aF,
const Standard_Real aTol)
has been implemented to check if the point IN the face.
3. class IntTools_EdgeFace
method
void IntTools_EdgeEdge::FindBestSolution(const Standard_Real aT11,
const Standard_Real aT12,
const Standard_Real aT21,
const Standard_Real aT22,
Standard_Real& aT1,
Standard_Real& aT2)
Treatment of the touching cases.
Test cases for issue CR24646
Correction of test cases for issue CR24646
Changes:
class BOPTools_AlgoTools
method:
Standard_Boolean BOPTools_AlgoTools::GetFaceOff
(const TopoDS_Edge& theE1,
const TopoDS_Face& theF1,
BOPTools_ListOfCoupleOfShape& theLCSOff,
TopoDS_Face& theFOff,
Handle(IntTools_Context)& theContext)
has been changed.
The comparison of the angles done with the angular tolerance value
Test case for issue CR25838
1. Algorithm of adjusting parameter to the surface boundaries has been changed.
2. Control First and Last parameters in BRepLib_CheckCurveOnSurface::Compute() function.
Test cases for issue CR25819
Updated test-cases from branch CR24255_3
0024255: Regressions in test cases on OCCT vc9 win64 Release
Small refactoring.
Fix for CASE bugs modalg_5 bug25298_09: FAILED (error)
Test-cases correction (bugs modalg_5 bugs25804_1, bug25704_2)
Changes:
class BOPAlgo_Builder
method:
void BOPAlgo_Builder::FillIn3DParts
(BOPCol_DataMapOfShapeListOfShape&,
BOPCol_DataMapOfShapeShape&,
const BOPCol_BaseAllocator& )
has been optimized and
modified to provide parallel treatment.
Correction of compilation errors
Test cases for issue CR25788
Test commands for #23952 refactored to:
- avoid interaction with Tcl interpreter from thread functions (fixes sudden crash)
- get shapes outside of the thread functions (keeping only code being tested inside)
- run 100 threads instead of 2 (increases chance for data race to exhibit if present)
Linux compilation problems fixed.
