DCAF require VISUALIZATION for correct work.
In some scenario DRAWEXE can generate a dublicates of the
internal static singletons. This means each dynamic library
will have their own instance of the static singleton.
Update all direct library loading to use the DCAF plugin
mechanism. This will ensure that the DCAF plugin is loaded
only once and that the correct instance is used.
Originally issue is reproduced only Linux with dlopen with "RTLD_LAZY".
Can be resolved additionally adding "RTLD_LAZY | RTLD_GLOBAL" for dlopen
Integrated DE plugin functionality.
Reworked DE components:
- TKDESTEP: Handling STEP file format.
- TKDEOBJ: Handling OBJ file format.
- TKDEIGES: Handling IGES file format.
- TKDEGLTF: Handling GLTF file format.
- TKDEVRML: Handling VRML file format.
- TKDEPLY: Handling PLY file format.
- TKDESTL: Handling STL file format.
Reworked DE DRAW components:
TKXSDRAWSTEP: Container for DE command to work with STEP.
TKXSDRAWOBJ: Container for DE command to work with OBJ.
TKXSDRAWIGES: Container for DE command to work with IGES.
TKXSDRAWGLTF: Container for DE command to work with GLTF.
TKXSDRAWVRML: Container for DE command to work with VRML.
TKXSDRAWPLY: Container for DE command to work with PLY.
TKXSDRAWSTL: Container for DE command to work with STL.
TKXSDRAW rework to be base DRAW plugin to keep DE session and utils.
Updated documentation
Updated samples
Fixed the Toroidal surface recognition;
The test case bugs/moddata_1/bug22296: the result is a torus with parameters: u [0, 2*PI], v [PI, 3*PI];
The test case bugs/modalg_5/bug23954: BAD -> OK.
Extrema/Extrema_GenExtCC.gxx - estimation of Lipchitz constant is improved
Extrema_GlobOptFuncCC.cxx - function value is changed
LocOpe/LocOpe_WiresOnShape.cxx - small correction to fix regression
lowalgos/extcc/bug32882 - new test case is added
some test were updated according new behavior of extrema algo
GeomInt/GeomInt_IntSS.cxx, IntTools/IntTools_FaceFace.cxx - setting deflection 0.01
for case of two bspline surfaces
IntPolyh/IntPolyh_Intersection.cxx, IntPolyh/IntPolyh_Intersection.hxx - status IsParallel is added
BndLib/BndLib_Add3dCurve.cxx, IntTools/IntTools_TopolTool.cxx - fix small bugs
Correction of test scripts according to current behavior of algorithms
lowalgos/intss/bug32849 - test case added
IntPatch_ALineToWLine.cxx - setting minimal number of points in a WLine depending on step size
IntPatch_WLineTool.cxx - fix WLines connecting check condition
test cases has been changed according to new behavior
move algorithm of obtaining results from function gproject to method ProjLib_CompProjectedCurve::Perform;
fix tolerances in ProjLib_PrjResolve::ProjLib_PrjResolve;
new treatment of myMaxDist;
use extend bounds in approximation;
add test;
test case "bugs modalg_5 bug25980", "bugs modalg_7 bug24185" have been changed according to new behavior.
0030620: Tests - perf/bop/buildfaces does not match description (broken)
Allow using meaningful parameters for the commands bbop and bapibop:
* common - for Common operation
* fuse - for Fuse operation
* cut - for Cut operation
* tuc/cut21 - for Cut21 operation
* section - for Section operation
Add description for the commands dealing with Boolean/GF/Split operations.
Validate arguments of these commands.
Correct test case perf/bop/buildfaces to perform GF execution in parallel and serial modes - compare the results.
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
Progress indication mechanism is refactored to support incrementing progress within multithreaded algorithms.
The class Message_ProgressIndicator is only an interface to the user application.
It accumulates the progress provided by progress scopes.
The counter is protected by mutex for thread-safety.
The new class Message_ProgressScope replacing Message_ProgressSentry should be used to advance the progress.
The scopes are nested to each other to reflect the nested nature of operations.
The new class Message_ProgressRange should be used to pass the progress to sub-scopes.
All OCCT algorithms involving progress indication have been updated to new API.
Improvements in Draw_ProgressIndicator:
- Separate console mode has been added in order to make possible to put the progress into std::cout instead
or in addition to the draw interpreter, instead of trigger option "-tclOutput".
- Treatment of Ctrl-Break signal has been added.
Now any operation can be aborted by Ctrl-C or Ctrl-Break keystroke.
Added new test case 'perf fclasses progr_par' for testing of parallel work of the progress.
Draw_Interpretor, CommandCmd() - catched exceptions and messages put into Tcl string result
before throwing a Tcl exception (return 1) are now print in intense red (using Message::SendFail()).
Duplication of exception message in std::cout and Tcl output has been removed.
Draw Harness plugins have been updated to use either Message::SendFail() or theDI instead of std::cout/std::cerr
for printing colored error message before throwing a Tcl exception.
Extrema_ExtCS.cxx: treatment of small line segments is added;
Extrema_GenExtCS.cxx: treatment of particular cases curve-quadric and conic-surface are added
Extrema_GlobOptFuncCQuadric, Extrema_GlobOptFuncConicS: new distance functions for particular cases are added
BOPAlgo_PaveFiller_5.cxx : treatment of large common parts edge-face is improved
ElSLib.cxx : method TorusParameters(...) is modified to avoid divide by zero
math_PSOParticlesPool.cxx : initialization of array is added
Extrema_ExtCs.cxx: number of subdivision is incresed for curve;
Modifications to fix regressions of some tests
IntTools_BeanFaceIntersector.cxx: restriction of curve, which is used in Extrema_ExtCS
ProjLib_CompProjectedCurve.cxx: tolerance is reduced for Extrema_ExtCS
BRepOffset_Tool.cxx: checking common vertex if it is Null
tests/bugs/modalg_7/bug27087 : test case added.
tests/bugs/modalg_5/bug25232_8 : test is modified according to new behavior of algorithms
Approx/Approx_SameParameter.cxx,hxx:
Class Approx_SameParameter refactoring. Logic is changed in many places to unify usage, simplify maintenance.
Method Curve2d() is changed to return Geom2d_Curve instead of Geom2d_BSplineCurve. Corresponding message is added to the upgrade guide.
.lxx file is merged into .hxx.
Tangent computation is extracted into special method.
Comparing number of sample points after CheckSameParameter(...) is added to define cases with projection fails.
Undesirable behavior when curves are not same parameterized is fixed.
Geom2dAdaptor/Geom2dAdaptor.cxx: treatment of offset curve is added
Adaptor3d/Adaptor3d_TopolTool.cxx: minor improvement of performance for BSpline surfaces with huge number of knots
Tests were modified according to new behavior of sameparameter algorithm
Fixed bugs that occurred when using the default std::cout from Message::DefaultMessenger() instead of Draw_Printer
A dedicated option was added to Draw_ProgressIndicator, for outputting data to the tcl when performing tests
Added -tclOutput parameter to XProgress command
The table of named colors has been compressed and moved out
from Quantity_Color.cxx into Quantity_ColorTable.pxx.
Quantity_NameOfColor - grayscale enumeration values have been re-ordered to fix discontinuity.
Duplicating colors has been merged within enumeration:
CHARTREUSE=CHARTREUSE1, GOLD=GOLD1, GREEN=GREEN1, ORANGE=ORANGE1,
ORANGERED=ORANGERED1, RED=RED1, TOMATO=TOMATO1, YELLOW=YELLOW1.
Added aliases to several other common colors:
BLUE=BLUE1, CYAN=CYAN1, LIGHTCYAN=LIGHTCYAN1, MAGENTA=MAGENTA1.
Quantity_Color class definition has been cleaned to follow OCCT coding style.
Quantity_Color now stores NCollection_Vec3<float> as class field instead of separate components.
Removed unused class Quantity_ColorDefinitionError.
New methods Quantity_Color::Convert_LinearRGB_To_sRGB() and Quantity_Color::Convert_sRGB_To_LinearRGB()
converting RGB components from linear to non-linear sRGB colorspace and vice versa.
Image_PixMap::PixelColor() and Image_PixMap::SetPixelColor() methods have been extended
with an optional argument for performing linearization/delinearization of 8-bit sRGB pixel formats.
Draw Harness command AISColor has been corrected to take color name instead of enumeration index.
1. Correct building history: the case of closed spine.
2. Rollback method GeomFill_CorrectedFrenet::InitInterval - correct processing singularities on spine.
3. Correct test cases.
BRepPrimAPI_MakeRevol.cxx, hxx
Insert checking of self-intersecting of generated surfaces in MakeRevol
BRepTest_SweepCommands.cxx
Adjusting command revol to current behavior of MakeRevol algorithm.
Approx_ComputeCLine.gxx - criterium to stop interval cutting is increased.
ProjLib_ProjectedCurve.cxx - fix regression for bugs modalg_5 bug25886
Other tests are modified according to current state of algorithm
Implementation of capturing of output to standard streams in DRAW (see command dlog) is revised to avoid problems with command "test" executing long test scripts:
1. Method OSD_File::Capture() is removed: on Windows it was allocating a C file descriptor for a file opened using WinAPI, and never released that descriptor (once allocated, it cannot be released separately from WinAPI file handle). Direct calls to dup/dup2 are used instead.
2. In Draw_Window.cxx the standard Tcl channels are initialized manually using corrected version of Tcl internal function. This works around a problem with Tcl channels on Windows being bound to OS device handle owned by the system which can get invalidated as result of calls to dup2() (used to capture output to standard streams).
3. Temporary file for capturing is opened once and used to store whole log, thus the need to collect log in the string stream in memory is avoided
4. Possible errors of dup() and dup2() are checked and reported
Test demo draw dlog is added
Off-topic changes:
- Test demo draw getsource is corrected for VS2017 which generates file name in lowercase
- Field myFaceBounds is initialized in constructor of the class BRepAlgo_NormalProjection to avoid undefined behavior
- Test bugs modalg_5 bug24012 is corrected to use command nproject instead of custom one, and to check propertes of the resulting shape
Two new functionalities have been added in BRepFilletAPI_MakeChamfer:
- constant throat (the section of chamfer is isosceles triangle, its height is constant in all sections - this is the "throat" of the weld);
- constant throat with penetration(the section of chamfer is right-angled triangle, the first of two surfaces (where is the top of the chamfer) is virtually moved inside the solid by offset operation, the apex of the section is on the intersection curve between moved surface and second surface, right angle is at the top of the chamfer, the length of the leg from apex to top is constant - this is the "throat" of the weld).
- New abstract classes BlendFunc_GenChamfer and BlendFunc_GenChamfInv have been added;
- Class BlendFunc_Chamfer is now descended from BlendFunc_GenChamfer, class BlendFunc_ChamfInv is now descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroat is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatInv is descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroatWithPenetration is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatWithPenetrationInv is descended from BlendFunc_GenChamfInv.
- Class ChFi3d_ChBuilder has now mode of chamfer that can be ClassicChamfer, ConstThroatChamfer and ConstThroatWithPenetrationChamfer.
- Two new DRAW Test Harness commands "chamf_throat" ant "chamf_throat_with_penetration" have been added for the second mode of ChBuilder.
- The interface of DRAW Test Harness command "chamf" changed for symmetric case.
The reason of this problem is in wrong work of classifier algorithm (see the message ~0080992 to the issue #30354). Therefore, the algorithm of IntTools_FClass2d class has been improved. Namely, now orientation of the polygon is computed from area-criterion instead of angle. As result, some simplification of the method IntTools_FClass2d::Init(...) has been made.
<!break>
1. New constructor has been added to the class CSLib_Class2d. It allows applying TColgp_SequenceOfPnt2d.
2. DRAW-commands "addpolygonnode" and "polygonprops" have been created. They are covered by the test case "tests/geometry/2dpolygon/A1".
3. New method Poly::PolygonProperties(...) has been created. See help for detailed information.
4. New testgrid "lowalgos classifier" has been created.
1. New testgrid "lowalgos/intss" has been created. It will contain all test cases on geometrical intersection of two surfaces ("intersect" DRAW-command) and two faces ("bopcurves" DRAW-command).
2. New test case for the issue #28493 has been created because the problem is not reproduced on MASTER.
3. Test case (lowalgos/intss/bug24472) for the issue #29501 has been modified in order to check loops of the resulting intersection curves.
1. The condition of WLine breaking (in IntWalk_IWalking algorithm) has become more independent of the input tolerance.
2. Currently the algorithm of IntPatch_Points of WLine processing depends on the algorithm of obtaining the WLine.
3. The methods IntSurf_LineOn2S::Add(...) and IntSurf_LineOn2S::SetUV(...) have become not inline (see the message ~0077431 in the issue #29866).
Check for double solutions has been added in algorithms Extrema_ELPCOfLocateExtPC and Extrema_ELPCOfLocateExtPC2d
that find extrema between point and curve.
Modified method: Approx_ComputeLine::Compute
Check of multicurve is now always unconditional, the procedure of check is modified to avoid infinite loops.
Modified classes: GeomLib_CheckBSplineCurve and GeomLib_Check2dBSplineCurve
Correction of poles at the ends of curve is modified to fit the direction of tangent defined by two first points or two last points of walking line.
Also modified:
BOPAlgo_PaveFiller: modified methods PostTreatFF, RemoveUsedVertices - now unused vertices are included in the list of vertices to be absorbed by other ones.
Test parse rules are improved to recognize messages with word 'fail' or 'failure' as errors.
Test cases are corrected accordingly (TODO or REQUIRED statements added where fail messages were not noticed previously).
Strengthening of the criteria of the parallel status of the curves by additional checking if the ends of the curves do not diverge.
Test cases for the issue.
In the algorithm math_FunctionRoots, improve the case when it is needed to find the extremum of the function. Earlier, to solve this task the method of gold section was used. With the patch, firstly the algorithm tries to find zero value of the derivative function. In most cases it gives precise result. Secondly, the algorithm tries to find zero value of the function using the old approach. The algorithm chooses the best solution among two computed by different methods.
In the method PutStickPavesOnCurve of BOPAlgo_PaveFiller, forbid putting a vertex to the end of the curve if this end already has a vertex assigned to it. This allows getting rid of unwanted colliding of vertices.
In the method UpdatePaveBlocks of BOPAlgo_PaveFiller, make the check for micro edges more precise.
New category of tests "lowalgos" has been added. Tests for low level algorithms are to be put there. "2dinter" is a new group of tests in this category.
Introduction of the new key for "2dintersect" command, allowing printing the intersection state for each point.
It has the following syntax now:
"2dintersect curve1 [curve2] [-tol tol] [-state]"
Options:
-tol - allows changing the intersection tolerance (default value is 1.e-3);
-state - allows printing the intersection state for each point.
Correct the test case bugs/modalg_7/bug28274 to make proper checks of the result.
Wrong distance computation has been corrected.
Some test-cases have been corrected according to their new behavior. Namely, built (by approximation algorithm) curve(s) has changed its geometrical position.
1. tests/blend/simple/X4
It is not a regression because the result is not correct on both MASTER and FIX (see explanation in the issue #26740). This problem is expected to be solved after porting Fillet-algorithm to new Boolean operation. Old Boolean operations do not cover Edge-Edge tangent-zone by vertex.
2. tests/bugs/modalg_6/bug27341_318
"checknbshapes" has been deleted in order to avoid non-stable behavior (see issue #29360) of this test case. New result is OK on both Linux and Windows platform.
Test for 0023171: Got wrong result after stitching
Test for 0023612: BRepPrimAPI_MakeTorus
Test for 0023610: checkshape command does not detect mismatch of the tolerance values among the sub-shapes of the shape
Test for 0023660: 'bsection' produces result with gap
Test for 0024397: BRepBuilderAPI_Copy works not correct
Test for 0023927: BRepProj_Projection produces Edge with one Vertex outside from curve
Test for 0023902: Cannot build fillet
Test for 0023669: Error in Boolean operations algorithm: section between cylindrical face and prism is incomplete
Test for 0023660: 'bsection' produces result with gap
Test for 0024100: Bad pcurve is built on a face while converting the shape from STEP format.
Test for 0024319: Sewing makes a solid transparent
Test for 0024302: Section operation modifies input argument
Test for 0024397: BRepBuilderAPI_Copy works not correct
Test for 0024418: Wrong section curves when intersecting analytical surfaces
The methods BOPAlgo_Tools::MakeBlocksCnx(), BOPAlgo_Tools::MakeBlocks() and static method MakeBlocksCnx in BOPAlgo_Builder_2.cxx have been replaced with the new template method BOPAlgo_Tools::MakeBlocks(). The blocks of connected elements are now stored into the list of list instead of data map.
All methods BOPAlgo_Tools::FillMap() have been replaced with the new template method BOPAlgo_Tools::FillMap().
Making the Pave Block with the smallest index of original edge to be the first in the Common Block (i.e. the representing Pave Block).
The following improvements have been made in Boolean Operations algorithm to avoid regressions:
- When updating the existing common block update its pave blocks in a way that the parameters of the paves should be valid for the original edge (bugs/modalg_5/bug24809);
- When trying to reduce the tolerance of the section edge check the tolerance of all Face/Face interferences that created this edge (boolean/volumemaker/C4,D2);
- Avoid producing the different Pave Blocks for the same section edge (boolean/volumemaker/D6);
Adjustment of the test cases.
1. The reason of exception has been eliminated.
2. Algorithm in IntPatch_WLineTool::JoinWLines(...) method has been modified in order to forbid join curves in the point where more than two intersection lines meet. More over, joining is forbidden if local curvature in the connection point is too big (see function CheckArgumentsToJoin(...) in the file IntPatch_WLineTool.cxx).
3. Interface of IntPatch_WLineTool::JoinWLines(...) method has been modified in order to reduce number of arguments.
4. Small corrections in IsSeamOrBound(...) static function has been made. Namely, check has been added if two boundaries are in the same period region but are too far each to other (see IntPatch_WLineTool.cxx, IsSeamOrBound(...) function, line # 532).
5. "Reversed" flag has been made local. Now, it is pure local characteristic: the algorithm decides itself, shall we reverse the argument order. This correction makes the algorithm more commutative (see issue #25404). However, IntPatch_WLineTool::JoinWLines(...) method can return non-commutative result.
6. Algorithm of searching small intersection curves has been improved.
7. New methods have been added in Bnd_Range class.
Some test cases have been adjusted according to their new behavior.
1. tests\bugs\modalg_6\bug26310_3
tests\bugs\modalg_6\bug26310_4
tests\bugs\moddata_2\bug235
tests\perf\modalg\bug26310_1
tests\bugs\modalg_5\bug24915
Logic of these cases has been changed. Mover over, additional check has been added in "bug26310_1" test case. Therefore, its performance will be slower than on the current MASTER.
2. tests\bugs\modalg_5\bug25292*
Scripts have been rewritten in order to make it more readable. Logic of these cases has not been changed.
Generation of 3D-steps shorter than 3D tolerance has been allowed in the fix to build Walking-line.
Now, 3D-step is limited by Precision::Confusion value.
1. Earlier we could not put any IntPatch_Point to the intersection curve. The fix makes the algorithm of IntPatch_Points searching more precise. It is achieved by redetermination of earlier found vertices with help of minimization the distance between boundary of one intersection argument and another intersection argument (surface).
2. Additional check has been added, if IntPatch_Point adjusted to the domain boundary is true intersection point.
3. Method Contap_ArcFunction::Surface() has been added.
4. Method LastComputedPoint() has been added for IntPatch_ArcFunction and Contap_ArcFunction classes.
5. Correction in FindMaxDistance() method (see IntTools_FaceFace.cxx file) according to pure Golden-ratio minimization algorithm. Earlier this function worked wrong with small searching intervals.
6. Insignificant correction in math_BrentMinimum.cxx file (elimination of "defines").
Creation of test case for issues #27221 an #27252.
Adjusting some test cases according to their new behavior.
Correction according to the last remarks.
Small correction of shape names for issue CR27252
Test case for issue 28210
Small correction of test case for issue 28210
