BRepBndLib.cxx : treatment of useTriangulation is modified according to specified behavior of algorithm
BRepTest_CurveCommands.cxx : creation edge from polygon3d is added in Draw command mkedge.
test bugs modalg_7 bug22821 failed on fillet shape with 5-th edge.
Experimentally has been found that reducing of parameter
ChFi3d_Builder::tolesp for this task solves the issue.
So, as soluton it is proposed to link parameter toleps with parameter range of
spine curve. So, production coefficient has been set to pass all tests and
2 teset was extended: tests/blend/complex/A6, tests/bugs/modalg_7/bug22821
first has been extended to test different scaling factors,
second has been extended to make fillet on all edges from 12.
Additionally:
- fixed misusage of tolesp in contexts where tolerance of point in 3d is excepted;
In some context usage of tol_esp is irrelevant, because its essentiality - tolerance of the parameter on the 3d curve.
So, in such context it has been replaced with new parameter tol3d (with fix value 1.0e-4).
Get rid of tolapp3d duplication constant - tol_3d
- tolesp = 5.0e-5 * (umax - umin)
- tolesp replaced by tolpoint2d/tolpoint3d in several classes.
Blend_Walking
BRepBlend_SurfRstLineBuilder
BRepBlend_RstRstLineBuilder
Blend_CSWalking
Instead `tolesp` - `tolgui` is employed in contexts where tolerance of guide curve parameter is excepted.
Instead `tolesp` - `tolpoint2d` or `tolpoint3d` is employed in contexts where tolerance of point in 2d or 3d space is excepted.
- Replace tolesp with tolpoint2d/tolpoint3d in BBPP function argument.
- Use tolapp3d instead tolesp in BonVoisin function,
Extend "proximity" command to be able to compute the proximity value;
Implement classes for calculate proximity value between two shapes;
Add possibility to set up the number of sample points for the input shapes;
Add tests lowalgos/proximity.
* Implement methods for copying tessellation to BRepTools_TrsfModification to keep the triangulation during transformation.
* Add tests to reproduce the problem.
Added new option '-C' with possibility to set value of Angular and linear tolerances to 'mksweep' command to correct input spine by merging smooth connected neighboring edges
1) BRepFill_Generator and BRepOffsetAPI_ThruSections now support 'non-destructive' mode for the input shapes (sections wires). The shape history of this algorithms also has been modified.
2) New test grids (based on the previous ones) have been added. These new cases use locked shapes as input arguments
3) The option '-safe' has been added to 'thrusections' command
Add '-exact' option to checkshape command to use exact method to validate edges using BRepLib_ValidateEdge class. Default mode is calculating in finite number of points.
The following classes have been removed as obsolete:
- BRepAlgo_BooleanOperation
- BRepAlgo_Fuse
- BRepAlgo_Cut
- BRepAlgo_Common
- BRepAlgo_Section
The corresponding classes from BRepAlgoAPI package have to be used instead.
Draw commands:
- fuse
- cut
- common
- section/psection
have also been removed as obsolete.
The corresponding commands for modern Boolean operations algorithm (bfuse/bcut/bcommon/bsection) have to be used instead.
Adjustment of the test cases to use the commands for modern algorithm.
- Now available to interrupt the DRAW 'distmini' command by Ctrl/C
- Message_ProgressRange/Message_ProgressScope used in BRepExtrema_DistShapeShape::Perform() to provide user break
Update BOP commands to use progress indicator
Deleted wrong usage of progress indicator from bop operations
Added UserBreak() method to break execution boolean operation if progress indicator is used
Added method AnalyzeProgress() to calculate steps of progress indicator
Introduce BOPAlgo_ParallelAlgo which has myRange as a field to be used in parallel vector.
Provide suitable way of keeping the progress steps of operations.
Give meaningful names to progress scopes.
Propagate progress indicator into deeper methods of BOA.
Add progress indicator to BOPAlgo_BuilderFace and BOPAlgo_WireSplitter, BOPAlgo_BuilderSolid and BOPAlgo_ShellSplitter
Implementation of raising exception while using scale and mirror transformation in shape location
TopLoc/TopLoc_Location.hxx
TopoDS/TopoDS_Shape.hxx
Implementation of new tools for removing forbidden locations from shapes:
BRepTools/BRepTools_PurgeLocations.cxx
BRepTools/BRepTools_PurgeLocations.hxx
BRepTools/BRepTools.cxx
BRepTools/BRepTools.hxx
Draw commands for transforming shapes are corrected, new draw commands: purgeloc, checkloc added
BRepTest/BRepTest_BasicCommands.cxx
Fixing unstable test bug xde bug24759
StepToGeom/StepToGeom.cxx
All other C++ commits are modification of algorithms used mainly in import/export operations in order to allows these operations if shape locations contains scale and mirror transformations.
New test for command purgeloc added
tests/bugs/moddata_3/bug27457
tests/bugs/moddata_3/bug27457_1
tests/bugs/moddata_3/bug27457_2
Some test corrected according to modifications.
Change BRepCheck_Analyzer::Perform algorithm from recursion to 'for' loop
Add parallelization to BRepCheck_Analyzer::Perform
Add '-parallel' option to checkshape command to use parallelization. Default mode is single-thread.
mutex as Handle
Code has been adjusted to suppress -Wunused-but-set-variable warnings.
DRAWEXE.wasm, compiler flags have been moved to linker flags
to eliminiate -Wunused-command-line-argument warnings.
Added to Draw command 'setsweep ' posibility to change degmax and segmax parameter manually by '-SM' and '-DM' options
Added test
Added new condition to prevent crash
Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface now inherit Standard_Transient.
Interfaces Adaptor2d_HCurve2d, Adaptor3d_HCurve, Adaptor3d_HSurface and their subclasses
are now aliases to Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface.
Removed numerous unsafe reinterpret casts.
Generic classes Adaptor3d_GenHCurve, Adaptor3d_GenHSurface, Adaptor2d_GenHCurve2d have been removed.
Several redundant .lxx files have been merged into .hxx.
Removed obsolete adaptor classes with H suffix.
Progress indication mechanism is refactored to support incrementing progress within multithreaded algorithms.
The class Message_ProgressIndicator is only an interface to the user application.
It accumulates the progress provided by progress scopes.
The counter is protected by mutex for thread-safety.
The new class Message_ProgressScope replacing Message_ProgressSentry should be used to advance the progress.
The scopes are nested to each other to reflect the nested nature of operations.
The new class Message_ProgressRange should be used to pass the progress to sub-scopes.
All OCCT algorithms involving progress indication have been updated to new API.
Improvements in Draw_ProgressIndicator:
- Separate console mode has been added in order to make possible to put the progress into std::cout instead
or in addition to the draw interpreter, instead of trigger option "-tclOutput".
- Treatment of Ctrl-Break signal has been added.
Now any operation can be aborted by Ctrl-C or Ctrl-Break keystroke.
Added new test case 'perf fclasses progr_par' for testing of parallel work of the progress.
Draw_Interpretor, CommandCmd() - catched exceptions and messages put into Tcl string result
before throwing a Tcl exception (return 1) are now print in intense red (using Message::SendFail()).
Duplication of exception message in std::cout and Tcl output has been removed.
Draw Harness plugins have been updated to use either Message::SendFail() or theDI instead of std::cout/std::cerr
for printing colored error message before throwing a Tcl exception.
Set safe exit status for:
Standard_NullObject exception,
Standard_NullObject: BRep_Tool:: TopoDS_Vertex hasn't gp_Pnt,
BRep_Tool: no parameter on edge,
BRepOffset_MakeOffset::TrimEdge no projection
BRepFeat_Form.cxx: methods IsDeleted, Modified, Generated are corrected
BRepTest_FeatureCommands.cxx: history treatment is added in methods DEFIN and PERF
bugs/modalg_7/bug31469: test case added
-Create a new package BRepPreviewAPI, inherited from BRepPrimAPI to create both, valid and degenerative shapes
-Create a new class BRepPreviewAPI_MakeBox for working with a box
Preview can be vertex, edge, rectangle or box
-BRepPrim_GWedge: in the case of non-valid data, the exception does not happen in the constructor, but at the moment of access to the shape
-BRepPrimAPI_MakeBox: myWedge is now not private, but protected, because used in BRepPreviewAPI_MakeBox which inherits from BRepPrimAPI_MakeBox
-Add tests for checking of a creation a preview in tests/geometry/preview (vertex, edge, rectangle, box)
-Update a command "box": add new parameters
Extend the Offset operation (Join Type "Intersection", mode "Complete") to allow different offset values on adjacent co-planar faces.
The gap between adjacent faces is closed by creating artificial face perpendicular to the face.
Adding test cases.
1. Correct building history: the case of closed spine.
2. Rollback method GeomFill_CorrectedFrenet::InitInterval - correct processing singularities on spine.
3. Correct test cases.
1. new file Standard_Dump to prepare and parse Dump in JSON format for OCCT objects
2. some presentations cover the proposed dump functionality.
3. 'bounding', 'vaspects' has '-dumpJson' field to see the DumpJson result
4. Bnd_Box constructor with min/max points is implemented to use Dump of this class in Dump BVH_Box
5. Limitation (some classes of Graphic3d, Prs3d has not full filling for DumpJson)
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
Add possibility of construction of the Optimal Oriented Bounding Box from set of points (the case of shape with triangulation).
The interface of the BRepBndLib::AddOBB method is not changed, but the option <theIsOptimal> now controls also the construction of the OBB from Set of points.
The slightly modified DiTo algorithm will be used, checking all possible axes created by the extreme points.
The performance of the construction of the Optimal OBB is lower but the quality is usually much higher (can't be worse by definition).
Test cases for the issue.
The capabilities of the class BRepOffsetAPI_MakeEvolved have been extended with involving alternate algorithm of resolving the loops in the piped shape. The new option theIsVolume is added for that in the constructor.
New class BRepFill_AdvancedEvolved has been created in order to provide new OCCT-algorithm combining BRepFill_PipeShell and BOPAlgo_MakerVolume.
A change in BOPAlgo_PaveFiller.cxx has been made in order to solve a specific problem of Boolean operation.
The interface of DRAW-command "evolved" has been updated to add the new option. DRAW-command "evolvedsolid" has been deleted. Now it is replaced with DRAW-command "evolved" with the option "-solid".
Testgrid "evolved" has been created.
BRepPrimAPI_MakeRevol.cxx, hxx
Insert checking of self-intersecting of generated surfaces in MakeRevol
BRepTest_SweepCommands.cxx
Adjusting command revol to current behavior of MakeRevol algorithm.
Implementation of method "IsDeleted(...)" for MakeRevol and MakePrism algorithms.
Problem (exception) occurs during history building and was caused by an attempt to obtain generated shape for subshape, which was really "deleted" by algorithm - this input subshape and its possible generated shape was not used in result.
