All uses of "MDTV-Standard" and "MDTV-Design" in tests changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
Formats changed: .std to .cbf, .dxc to .dbf.
Test groups renamed accordingly:
xcaf: brep_to_dxc -> brep_to_xbf, igs_to_dxc -> igs_to_xbf, stp_to_dxc -> stp_to_xbf, dxc -> xbf/A1, dxc_add_CL -> xbf_add_CL
xml: ocaf_std -> ocaf_cbf, xcaf_dxc -> xcaf_xbf
1. Function IntImp_Int2S::ChangePoint() has been added (see cdl for detail information).
2. Attempt to forbidden break WLine if it goes along surface boundary.
Code optimization.
2nd optimization
Test case for issue CR25890
Precision used to consider B-Spline knots identical is restricted to be not less than Precision::PConfusion() in Geom2d_BSplineCurve::Segment().
Affected tests updated (improvements)
Test case for issue CR25971
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
1) Treatment of case when projection algorithm to BSpline surface return null 2d curve.
2) Changed approximation of next step in default projection algorithm.
3) Special handling of surface of revolution added.
"Period jump" handling evaded in case when curve not computed.
Test cases for issue CR25892
Small correction of test cases fot CR25892
Handling of trimmed analytical surfaces added in extrema PS.
New draw-command and test case for issue CR25861
Correction of test case for issue CR25861
1. Cylinders are tangent to each other indeed. Fix processes this case.
2. Algorithm of intersection line computing (in case of cylinders with two parallel axes) has been changed.
Test cases for issue CR25782
1. Eliminated exception after conversion non-rational B-spline to rational
2. Implemented DRAW command setweight to change weights of B-spline
3. Test cases were added
1. Using of the "Closed" flag was unified:
a) this flag is applicable for TopoDS_Wire and TopoDS_Shell only, because these entities may hedge an area in 2D space or a volume in 3D space correspondingly;
b) other types of TopoDS shapes are passing over this flag;
c) changing of this flag should be controlled by high-level algorithms (not BRep_Builder).
2. Implemented verification of the closedness of edges. An edge is closed if and only if its first and last vertices are the same.
3. Test cases were changed according to new behavior.
Fixed last point handling: now we try to check interval with last point instead of adding it to output set of points.
Test case for issue CR25489
Correction of test case for issue CR25489
Implemented additional flag into Geom_TrimmedCurve to adjust or not the periodic curve inside the first period.
API of Geom2d_TrimmedCurve is changed according to Geom_TrimmedCurve.
Test-case for issue #24411
Wrong border 1.0e-9 jump has deleted. Added periodicity information when projecting to surface.
Period "jump" bug fixes.
AppCont_LeastSquare conversion to non cdl class.
AppCont_Function + AppCont_FunctionTool combined in one class providing the same functionality and converted to non cdl.
Testcase modification.
Test cases for issue CR24988
Fixed incorrect comparison.
Calculation of last parameter of projected curve was changed for the projecting of a curve to surface of revolution, if the curve is intersected with the axis of revolution
Test case for issue CR25494
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Method BRep_Tool::IsClosed() extended to analyze closure of wires in addition to shells and solids.
External and Internal edges and vertices are ignored in this check.
Analysis of compounds is disabled.
Update of flag Closed according to actual state is added in most places where new shells are constructed.
Draw-command and test case for issue CR25202
1. New status "BRepCheck_InvalidPolygonOnTriangulation" is added.
2. Small correction of output of "checkshape" command result.
Test cases were changed.
Test case for issue CR25109
Some test cases were changed according to their new behavior.
class ProjLib_ComputeApprox
method
ProjLib_ComputeApprox::ProjLib_ComputeApprox
(const Handle(Adaptor3d_HCurve) & C,
const Handle(Adaptor3d_HSurface) & S,
const Standard_Real Tol )
Using Precision::PConfusion() as a 2d tolerance when shifting the projected curve.
Test case for issue CR25223
The patch changes the algorithm of choosing the initial approximation for Newton's method. Instead of searching for a point on the fine shifted grid, the algorithm performs initial search for candidate points in the original coarse grid (which is cached in new version). After that particle swarm optimization (PSO) is used to localize the global minimum. This algorithm optimizes a problem by having a population of candidate solutions ("particles"), and moving these particles around in the search-space according to simple mathematical formula over the particle's position and velocity. Each particle's movement is influenced by its local best known position but, is also guided toward the best known positions in the search-space, which are updated as better positions are found by other particles. This strategy has reported good results in solving complex global optimization problems.
Current patch implements initial version of PSO for using in Extrema_GenExtCS class. Typically new approach allows to reduce the number of evaluations by 5-10 times. There are only few cases there the numbers of evaluations are comparable.
Consider angular tolerance during calculation of angle between two vectors for protection against deviations that are significantly less than tolerance.
Simplified code to reduce number of comparison
Added QA command OCC24945 and test case bugs/moddata_3/bug24945
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
math_GlobOptMin - new global optimization minimization algorithm
Extrema_GlobOptFuncCC, Extrema_ExtCC, Extrema_ExtCC2d - implementation of GlobOptMin algorithm to extrema curve / curve
Extrema_CurveCache - deleted as obsolete code
ChFi3d_Builder.cxx - fixed processing of extrema
math_NewtonMinimum.cxx - fixed step to avoid incorrect behavior
Test cases modification to meet new behavior.
For fix this case in method Geom2dInt_Geom2dCurveTool::NBSamples() number of samples for 2d offset and trimmed curve is computed as max value from number of samples for other curve and number of samples for basis curve.
Test case for issue CR24800
DRAW command "vertex" was extended to create vertex from point.
DRAW command "extrema" was extended and unified: both extrema points are outputted to DRAW in case of too close points;
parameters of extremal points are outputted.
35 shapes were added for anti-regression tests.
Second DRAW test was created for bug CR23830.
Move shapes to shape-repository
