Correct the method PerformCurve of GCPnts_QuasiUniformDeflection to get the proper derivative at the end of the current curve.
Improve the Draw commands "crvpoints" and "crvtpoints" so that to work with wires as composite curves.
Improve the algorithm BRepPrimAPI_MakeHalfSpace. Earlier it made projection of the point only on faces. If the nearest point does not conform to normal projection criterion the result is wrong. The fix includes search of projection on edges and vertices. This makes the algorithm robust for half spaces with boundaries.
The static method CorrectSurfaceBoundaries() in the class IntTools_FaceFace,
which is used for correction of the boundaries of the faces before their intersection,
contains two inconsistent adjustments of the boundaries of the faces based on periodic surfaces.
One of these adjustments has been removed. The remaining adjustment, the one that is based on the
2D bounding boxes of the closed curves, should be sufficient.
Test case for the issue.
(cherry picked from commit 7cb2f40993)
1. The reason of exception has been eliminated.
2. Algorithm in IntPatch_WLineTool::JoinWLines(...) method has been modified in order to forbid join curves in the point where more than two intersection lines meet. More over, joining is forbidden if local curvature in the connection point is too big (see function CheckArgumentsToJoin(...) in the file IntPatch_WLineTool.cxx).
3. Interface of IntPatch_WLineTool::JoinWLines(...) method has been modified in order to reduce number of arguments.
4. Small corrections in IsSeamOrBound(...) static function has been made. Namely, check has been added if two boundaries are in the same period region but are too far each to other (see IntPatch_WLineTool.cxx, IsSeamOrBound(...) function, line # 532).
5. "Reversed" flag has been made local. Now, it is pure local characteristic: the algorithm decides itself, shall we reverse the argument order. This correction makes the algorithm more commutative (see issue #25404). However, IntPatch_WLineTool::JoinWLines(...) method can return non-commutative result.
6. Algorithm of searching small intersection curves has been improved.
7. New methods have been added in Bnd_Range class.
-----------------------------------------
Some test cases have been adjusted according to their new behavior.
1. tests\bugs\modalg_6\bug26310_3
tests\bugs\modalg_6\bug26310_4
tests\bugs\moddata_2\bug235
tests\perf\modalg\bug26310_1
tests\bugs\modalg_5\bug24915
Logic of these cases has been changed. Mover over, additional check has been added in "bug26310_1" test case. Therefore, its performance will be slower than on the current MASTER.
2. tests\bugs\modalg_5\bug25292*
Scripts have been rewritten in order to make it more readable. Logic of these cases has not been changed.
The algorithm in WorkWithBoundaries::BoundaryEstimation(...) did not take into account opposite directions of cylindrical axes (when the angle between them is obtuse). After the fix it does it.
Small correction of test cases for issue CR28009
(cherry picked from commit c9c7286e56)
Method WorkWithBoundaries::BoundaryEstimation(...) has been brought in balance with IsParallel(...) method, which checks if cylinder axes are parallel.
(cherry picked from commit 95f8c6082d)
Sometimes start point of the intersection line is in the surface boundary strictly. I.e. the parameter of this point in the surface can be equal to both 0 or 2*PI equivalently. It is important to chose correct parameter value.
The algorithm of prediction is based on monotonicity property (see CylCylMonotonicity(...) function in IntPatch_ImpImpIntersection_4.gxx). Now, this function is used wrongly. The fix improves this situation.
Small optimization in the code.
Creation of test cases .
The logic of returning value by the method BoundariesComputing() has been corrected.
(cherry picked from commit 79997052f1)
Check, if cylinder axes are parallel is made more carefully.
This check is brought to conformity with check if axes are parallel (see constructor AxeOperator::AxeOperator(...) in IntAna_QuadQuadGeo.cxx file)
Test case for issue CR26884
(cherry picked from commit ce48b00930)
1. Partial porting of the patches for the issues #0026738 and #0028017:
Careful treatment of the SD vertices created on the Face/Face intersection stage.
2. Avoid creation of the small section edges.
3. Test case for the issue.
4. Adjusting test cases for current behavior.
1. The result of Boolean operation on the arguments of collection type, containers WIRE/SHELL/COMPSOLID, is now also a collection.
The result of Boolean operation on arguments of non-collection types is now a compound containing the splits of arguments directly, without its enclosure into containers.
Thus, if there were no containers, such as WIRE/SHELL/COMPSOLID, in the input arguments there will be no such containers in the result of BOP.
2. The containers of type WIRE included into result should now also (as the SHELLs) have coherent orientation of its sub-shapes.
For that the new method has been implemented (BOPTools_AlgoTools::OrientEdgesOnWire(TopoDS_Shape&)) which reorients edges of the given shape for correct ordering.
3. The duplicating containers, i.e. containers with the contents completely included in other containers, are now avoided in the result of BOP.
4. Documentation has been updated.
5. New test cases for the issue.
6. Adjusting test cases to current behavior.
1. Partial porting of the fix for the issue #0026560:
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
2. New test cases are created.
The problem of incorrect CUT is wrong Pcurve after projection onto cylinder of a small edge orthogonal to cylinder's axis. The result of projection is a line along V direction, but it should be along U.
ProjLib_Cylinder has no specific functionality to build projection in most common case, so it should return "not done" flag to start projection based on curve approximation.
Following changes are done:
1. ProjLib_Cylinder returns isDone=false in the following cases:
* the projected line is not parallel to cylinder's axis
* the plane of projected circle is not orthogonal to cylinder's axis
2. Test case added
Tolerance of vertices's of the degenerated edges are increased
to value of tolerance of the splitting vertex for case when splitting vertex was projected on the degenerated edge.
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Modifications to avoid exception for case overlapped edges was made.
Returned values of the methods LocOpe_SplitShape:AddOpenWire() and LocOpe_SplitShape:AddClosedWire() were modified from void to boolean in order to avoid raising of the exceptions for cases when result wire can not be built.
Lipchitz constant approximation and fixes in global optimization algorithm added to improve performance.
Test case added.
Fix backporting:
0026593: Coding rules - revert compatibility of NCollection_CellFilter constructor with old code
Restored old constructor and old behavior where possible.
Minor correction.
0026395: Merge clasees NCollection_CellFilter_NDim and NCollection_CellFilter
Deleted exceed class CellFilterNDim.
Now dimension count used as input parameter in NCollection_CellFilter.
minor corrections.
BRepMesh_CircleTool: extend radius of circle by quite small value in order to classify points forming inscribed triangle as lying on it. Do not use PConfusion due to false positive result leading algorithm to hanging.
Extrema Curve / Surface algorithm changed to perform more accurate search.
test case bug25232_8 - improvement, one additional intersection point is detected now.
test case bug23830 - normal behavior, position of extrema is changed.
Small correction of pro19653 test
test case for original issue added.
Useless variable MAXTOLERANCEGEOM is removed in order to allow to place point at any distance from curve/surface.
Algorithm is simplified: particular calculations for analytical geometry are removed, only using of Extrema_... is kept.
1. Check face location has been added.
2. Message, if mkplane command fails, has been added.
3. Test case for this issue has been created.
Changes in accordance with the remark.
Small correction of test case for issue CR26687
OpenGl_ShaderManager::PushAspectFace(), setup alpha to Diffuse() component as in FFP.
OpenGl_ShaderManager::stdComputeLighting(), take alpha from material Diffuse component.
