PCurve is extended to surface boundary forcefully.
It is made by finding some additional points (if it is possibly).
"bopcurves" DRAW-command returns number of found 3D-curves and (as an option) 2D-curve (see help for more detail information).
Test cases for issue CR24585
Graphic3d_StructureManager::ReComputeStructures() method was corrected to consider all child (connected) structures.
Corrected remarks: added image dump in test case; corrected method name.
AIS_Dimension::GetTextPosition() and AIS_Dimension::SetTextPosition() methods were added.
Added possibility to set and unset text label alignment respectively to the attach points after text position changed.
Added test cases to check text positioning with dimension parameters and with setting 3D point.
Corrected DRAW commands vmovedim, vangledim, vdistdim, vradiusdim.
Corrections of AIS_Dimension::SetTextPosition(): aspect parameters are not changed inside it.
Layout mode was removed; test cases and vdimparams, vdimension commands were corrected.
remarks: coding style, removing redundant code of LayoutMode enumeration.
Changes:
class BOPDS_DS
- method:
void BOPDS_DS::Init()
- method:
void BOPDS_DS::FaceInfoIn
(const Standard_Integer theF,
BOPDS_IndexedMapOfPaveBlock& theMPB,
BOPCol_MapOfInteger& theMI)
Add the information about internal vertices on faces to the Data Structure
Test case for issue CR24597
1. Checking, if intersection curve is collapsed, is added. (file GeomInt_LineConstructor.cxx)
2. Earlier, intersection line was considered as valid if only mid-point of every interval of this line is into two intersected surfaces (with given tolerance). That's no good because after inserting of new points, old points, which is considered as valid only because they are into beginning or into end of interval (therefore, they was not checked), moved to mid of interval and became invalid. Therefore, checking for first and last points was added. (file GeomInt_LineConstructor.cxx)
3. Intersection line became valid (see bug description) after adding of new additional points into it (file IntPatch_PrmPrmIntersection.cxx). Methods for finding and adding of new points were added. (file IntWalk_PWalking_1.gxx)
Some test cases were changed.
Test cases for issue CR24472
1) Used more accurate Select3D_SensitiveTriangulation instead of Select3D_SensitiveFace for rectangular sensitives in AIS_Plane::ComputeSelection, AIS_Dimension::ComputeSelection
2) Test case for CR24564
1) Allow AIS_InteractiveContext::Update to check, re-project and recompute selection structures even if presentations are not "to be updated".
2) Test case bugs vis bug24569.
Small correction of test case for issue CR24569
Main problem:
Algorithm of locale extrema, which is called by "sameparameter" command, cannot find extrema because extremal point is far from initial point. Therefore, reparametrization of edge's curve (for same-parameter) cannot be made properly.
Solve:
Using of global extrema (see Approx_SameParameter.cxx).
As the given edge contains two 2d-curves and the second from them is problem, for select needed curve, an interface of "mk2dcurve" DRAW-command is changed. Now there can be used an index of curve (by default, index = 1, as earlier), see help for more detail information.
Test "heal advanced Z3":
Now checkshape finds only two invalid subshapes. Earlier, it found four subshapes. I think it is not regression. Therefore, test case was changed.
Tolerance reducing.
test
StdPrs_ToolShadedShape::IsClosed():
- return true if shape is closed Solid (NOT just free closed Shell)
- accept compound of closed Solids as well
- ignore Solids with incomplete triangulation
TKOpenGl, automatically disable back face culling when:
- clipping/capping planes are in effect
- for translucent objects
Update bug23227 test case (now back faces are clipped).
OpenGl_Workspace::AspectFace() - disable culling in case of hatched style
Incorrect curve is got after Decompose method applying. This method's using should be restrict.
Decomposition is required if intersection curve contains some parts, where U-parameter on quadric surface changes too sharply.
Decompose method is called for Cone and Sphere only (it does not require for Cylinder).
Comments are changed by jgv.
Test case for issue CR24427
Added test case bugs/moddata_3/bug24427_2
Compiler warning is liquidated.
Test is corrected.
Projection of 3d points corresponding to range of edge on 2d curve considered as successful for all cases to except for cases when projection is not made.
Initialization initial values of flags
Modification initial values of flags setting status Done for first and last parameters
Adding new draw-command for issue CR24370
Test case for issue CR24370
DRAW command discrCurve was created to test GCPnts_UniformAbscissa by count of discretization point.
Two bugs in GCPnts_AbscissaPoint were fixed.
DRAW tests for the bug were created.
The intersection between Cone and one of the following surfaces: Cylinder, Sphere, Cone and Torus
is treated as analytical when the axes of the surfaces are collinear.
Test case for issue CR24505
Added test case bugs/modalg_5/bug24204
Modified following test cases:
bugs modalg_3 bug605 - case with bad input data, command "settolerance w1 1.e-7" was added;
bugs modalg_4 bug629 - wrong case, now the algorithm can not build pipes on such profiles, test case was removed;
bugs modalg_4 bug13595_1, bug13595_1 - number of subshapes was has changed;
bugs modalg_5 bug23706_2 - square of resulting face was changed;
bugs modalg_5 bug23870_1, bug23870_2, bug23870_3, bug23870_4, bug23870_5 - the number of subshapes was changed.
Modifications:
1. The validity of the intersection point between edge and face is checked with sum of the tolerance values of the edge and face.
2. The intersection between toroidal surface and one of the following surfaces: Plane, Cylinder, Sphere, Cone or Torus
is treated as analytical in the following cases:
1) Torus and Plane: a. Axes of the surfaces are parallel;
b. Axes of the surfaces are perpendicular and location of the torus is lying on the plane;
2) Torus and Sphere: The location of the sphere is lying on the line made from toruses axis;
3) Torus and Cone, Cylinder or Torus: The axis of the surfaces are collinear.
In all cases the intersection line(s) is(are) circle(s).
Added test cases bugs/modalg_5/bug24470
The intersection between torus with minor radius more than (or equal to) the major radius and any other surface is considered as parametric.
New features:
- class BOPDS_InterfVZ has been added.
Purpose: The class BOPDS_InterfVZ is is to store the information about
the interference of the type vertex/solid.
- class BOPDS_InterfEZ has been added.
Purpose: The class BOPDS_InterfEZ is is to store the information about
the interference of the type edge/solid.
- class BOPDS_InterfFZ has been added.
Purpose: The class BOPDS_InterfFZ is is to store the information about
the interference of the type face/solid.
- class BOPDS_InterfFZ has been added.
Purpose: The class BOPDS_InterfZZ is is to store the information about
the interference of the type solid/solid.
- class BOPDS_DS
-methods
inline BOPDS_VectorOfInterfVZ& BOPDS_DS::InterfVZ()
Purpose: Returns the collection of interferences Vertex/Solid
inline BOPDS_VectorOfInterfEZ& BOPDS_DS::InterfEZ()
Purpose: Returns the collection of interferences Edge/Solid
inline BOPDS_VectorOfInterfFZ& BOPDS_DS::InterfFZ()
Purpose: Returns the collection of interferences Face/Solid
inline BOPDS_VectorOfInterfZZ& BOPDS_DS::InterfZZ()
Purpose: Returns the collection of interferences Solid/Solid
inline Standard_Integer BOPDS_DS::NbInterfTypes()
Purpose: Returns the number of types of the interferences
have been added.
- class BOPDS_Tools
-method
inline Standard_Boolean BOPDS_Tools::IsInterfering
(const TopAbs_ShapeEnum theT)
has been added.
Purpose: Returns true if the type <theT> can be participant of an interference
- class BOPDS_ShapeInfo
-method
inline Standard_Boolean BOPDS_ShapeInfo::IsInterfering()const
has been added.
Purpose: Returns true if the object can be participant of an interference
- class BOPDS_ShapeInfo
-methods
void BOPAlgo_CheckerSI::PerformVZ()
Purpose: Computes Vertex/Solid interferences
void BOPAlgo_CheckerSI::PerformEZ()
Purpose: Computes Edge/Solid interferences
void BOPAlgo_CheckerSI::PerformFZ()
Purpose: Computes Face/Solid interferences
void BOPAlgo_CheckerSI::PerformZZ()
Purpose: Computes Solid/Solid interferences
have been added
Changes:
- class BOPDS_DS
- method:
Standard_Boolean BOPDS_DS::HasInterfShapeSubShapes
(const Standard_Integer theI1,
const Standard_Integer theI2,
const Standard_Boolean theFlag)const
has been modified.
Purpose:
Returns true if the shape with index theI1 is interfered with
- at least one sub-shape of the shape with index theI2 (theFlag=true)
--all sub-shapes of the shape with index theI2 (theFlag=false)
- class BOPDS_Tools
- method:
inline Standard_Integer BOPDS_Tools::TypeToInteger
(const TopAbs_ShapeEnum aType1,
const TopAbs_ShapeEnum aType2)
The method has been extended to treat */Solid interfertences.
- class BOPDS_Iterator
- constructors:
BOPDS_Iterator::BOPDS_Iterator();
BOPDS_Iterator::BOPDS_Iterator
(const Handle(NCollection_BaseAllocator)& theAllocator);
- method:
void BOPDS_Iterator::Prepare();
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- class BOPDS_IteratorSI
- method:
void BOPDS_IteratorSI::UpdateByLevelOfCheck(const Standard_Integer theLevel)
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- method:
void BOPDS_IteratorSI::Intersect()
The method has been extended to treat */Solid interfertences.
- class BOPAlgo_CheckerSI
- constructor:
BOPAlgo_CheckerSI::BOPAlgo_CheckerSI()
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- method:
void BOPAlgo_CheckerSI::SetLevelOfCheck(const Standard_Integer theLevel)
The constant number of types of the interferences has been changed by
the call: BOPDS_DS::NbInterfTypes();
- methods:
void BOPAlgo_CheckerSI::Perform()
void BOPAlgo_CheckerSI::PostTreat()
The methods have been extended to treat */Solid interfertences.
- class BOPAlgo_ArgumentAnalyzer
- method:
void BOPAlgo_ArgumentAnalyzer::TestSelfInterferences()
The method has been extended to treat */Solid interfertences.
Added test case bugs/modalg_5/bug24492
- Fixed invalid presentation of dimension highlight.
- Fixed bug on switching between selection modes. Individual sensitive entities generated for each selection mode.
- Revised selection: AIS_DimensionSelectionMode enumeration added, redundant AIS_DimensionDisplayMode is removed.
- Revised entity owner usage: used standard SelectMgr_EntityOwner for neutral selection, AIS_DimensionOwner for "line", "text" selection modes.
- Made arrows selectable.
- Got rid of predefined arrow angle. The arrow angle is now taken from dimension aspect.
- The 3D text is now centered by bounding box for better alignment.
1. Modified test cases to improve using of Japanese characters
bugs vis bug22149
bugs vis bug22796_2
2. Modified test case bugs vis bug23813 to avoid regression caused by using vdump command with non-default parameters on remote PCs
bugs vis bug23813
3. Behavior change of test case de iges_2 B1 in DEBUG mode on Linux and Windows platforms (OCC24442)
de iges_2 B1
