Extrema/Extrema_GenExtCC.gxx - estimation of Lipchitz constant is improved
Extrema_GlobOptFuncCC.cxx - function value is changed
LocOpe/LocOpe_WiresOnShape.cxx - small correction to fix regression
lowalgos/extcc/bug32882 - new test case is added
some test were updated according new behavior of extrema algo
Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface now inherit Standard_Transient.
Interfaces Adaptor2d_HCurve2d, Adaptor3d_HCurve, Adaptor3d_HSurface and their subclasses
are now aliases to Adaptor2d_Curve2d, Adaptor3d_Curve and Adaptor3d_Surface.
Removed numerous unsafe reinterpret casts.
Generic classes Adaptor3d_GenHCurve, Adaptor3d_GenHSurface, Adaptor2d_GenHCurve2d have been removed.
Several redundant .lxx files have been merged into .hxx.
Removed obsolete adaptor classes with H suffix.
"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
All occurrences of Standard_EXPORT attached to inline methods in OCCT code are eliminated.
Some unused classes and C++ files producing no code are deleted.
1. Method Approx_ComputeLine::Perform is modified: now it contains also recursive calls after new line computation made by new method ApproxInt_MultiLine::MakeMLOneMorePoint.
2. New method MakeMLOneMorePoint is added to ApproxInt_MultiLine: it builds new sub-line as a part of main line with new point added into the middle of the longest interval between existing points.
3. Method ShapeConstruct_ProjectCurveOnSurface::ApproxPCurve is modified to avoid regressions: now it takes care of the set of initial points to be enough close to each other so that an interval between two adjacent points is less than half-period of the surface.
4. Modification in ShapeConstruct_ProjectCurveOnSurface: correction of pcurves of edges which extremities are in the singularities of surface.
Get rid of iterations on maps with shape key by replacing simple maps with indexed maps. So iteration is done on integer key.
The map containers have been updated to insert into them type definitions of key and value.
The new methods RemoveKey() and RemoveFromIndex() have been added to indexed [data] map to be able to remove an arbitrary key from the map.
All the code in OCCT has been updated where RemoveLast() and Substitute() methods were used to remove a key from indexed [data] map.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Check of the gap between ends of the p-curves having common vertex in the parametric space of face similar as in the class BRepCheck_Wire was added.
Check that face lies on the periodic surface was added.
Added check between ends of 2D curves in the 3D space and vertex the same which used in the BRepCheck_Wire::SelfIntersect
Test case for issue CR28094 has been created.
Code has been updated to remove no-op casts and implicit casts to Standard_Boolean.
Places of inproper use of Standard_Boolean instead of Standard_Integer
have been corrected:
- Bnd_Box, Bnd_Box2d
Bit flags are now defined as private enum
- HLRAlgo_BiPoint, HLRAlgo_EdgesBlock, HLRBRep_EdgeData, HLRBRep_FaceData
Bit flags are now defined as enum
- HLRAlgo_EdgeStatus, HLRBRep_BiPnt2D, HLRBRep_BiPoint
Bit flags are now defined as bool fields
- HLRAlgo_PolyData
Bit flags are now defined as Standard_Integer
- OSD_DirectoryIterator, OSD_FileIterator
Boolean flag is now defined as Standard_Boolean
- ShapeAnalysis_Surface::SurfaceNewton()
now returns Standard_Integer (values 0, 1 or 3)
- ChFi2d_FilletAlgo
now uses TColStd_SequenceOfBoolean instead of TColStd_SequenceOfInteger
for storing boolean flags
Method IFSelect_Dispatch::PacketsCount() has been dropped from interface.
ShapeFix_Solid::Status() has been fixed to decode requested status
instead of returning integer value.
TopOpeBRepBuild_Builder1 now defines map storing Standard_Boolean values
instead of Standard_Integer.
Persistence for Standard_Boolean type has been corrected
to keep backward compatibility:
- BinMDataStd, BinTools, FSD_BinaryFile
Broken Draw Harness commands vdisplaymode and verasemode have been removed.
BRepMesh_FastDiscretFace::initDataStructure() - workaround old gcc limitations
BRepMesh_IncrementalMesh::clear() - avoid ambiguity
Useless *.cxx files were removed to eliminate linker warning LNK4221.
Package TopOpeBRepDS was cleaned up from old debugging routines.
Merged OSD_signal_WNT.cxx into OSD_signal.cxx
Class Standard_ErrorHandlerCallback was moved into the Standard_ErrorHandler class as nested class Callback
Eliminated warning about unused variable.
The new method has been added in the class BRepFeat_SplitShape for addition of the sequence of the splitting edges or wires for the whole initial shape without specification of the edge->face, edge->edge mapping.
The procedure of collecting wires has been corrected so as not to take into account the distance in 2D space between adjacent edges having a common vertex.
New category of tests "bugs/splitshape" has been added to non-regression data base.
Test cases for issue CR27520
Remove compilation warnings.
Add dependence of TKFeat on TKShHealing in EXTERNLIB in order to build with genproj.
Check deviation of normals at vertices of triangles for complex surface types different from Bezier and BSpline.
Modified test cased according to changes in BRepMesh.
Do not remove more intermediate parameters than N - 3 in order to have at least one parameter related to surface internals.
Check angle for angular deflection before removement of intermediate parameters.
Unify computation of internal vertices for complex surfaces.
Discretization points of edges are taken into account during computation of step of mesh grid.
Remove parameters only if they fit the constrains along the whole surface.
Do not add random internal parameters in case if their number is just 2.
Force freezing parameters both for U and V in case of significant control point.
Modified test cases
Warnings elimination in vc14.
Added protection for cases of the overlapped edges.
Returning value for methods in the LocOpe_SplitShape::AddOpenWire(), LocOpe_SplitShape::AddClosedWire() are modified from void to boolean in order to avoid raising exceptions.
To avoid regression for test case modalg_5 bug25243 tolerance of vertices of the degenerated edges are increased to value of tolerance of the splitting vertex for case when splitting vertex was projected on the degenerated edge.
Adaptations for compiling with GCC 4.7 and 4.8:
- Construction semantics is used for Handle objects being initialized by const Handle objects of derived type, to avoid overload resolution error in GCC 4.7.
- Missing includes added.
- Fixed bugs related to misuse of direct casts of handle.
- Eliminate CLang warnings on uninitialized and unused variables, functions, and expressions
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
1. Using of the "Closed" flag was unified:
a) this flag is applicable for TopoDS_Wire and TopoDS_Shell only, because these entities may hedge an area in 2D space or a volume in 3D space correspondingly;
b) other types of TopoDS shapes are passing over this flag;
c) changing of this flag should be controlled by high-level algorithms (not BRep_Builder).
2. Implemented verification of the closedness of edges. An edge is closed if and only if its first and last vertices are the same.
3. Test cases were changed according to new behavior.
Wrong border 1.0e-9 jump has deleted. Added periodicity information when projecting to surface.
Period "jump" bug fixes.
AppCont_LeastSquare conversion to non cdl class.
AppCont_Function + AppCont_FunctionTool combined in one class providing the same functionality and converted to non cdl.
Testcase modification.
Test cases for issue CR24988
Fixed incorrect comparison.
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
Method BRep_Tool::IsClosed() extended to analyze closure of wires in addition to shells and solids.
External and Internal edges and vertices are ignored in this check.
Analysis of compounds is disabled.
Update of flag Closed according to actual state is added in most places where new shells are constructed.
Draw-command and test case for issue CR25202
Current implementation can fail in case if several alternative directions in wire creation are possible.
The proposed fix provides:
* define the most left direction in UV
* usage of indexed map to provide deterministic behavior
Error message is put into exception raised in case if split is not possible
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
Sorting by intersection of bounding boxes of faces with line or box built for curve was added.
Recursive call method Find() was replaced on sequential call.
Added method Init to initialize algorithm by separate curve for intersection of shape by multiple curves.
Added possibility to intersect shape by multiple curves in DRAW command.
Added test case bugs/modalg_5/bug24899
math_GlobOptMin - new global optimization minimization algorithm
Extrema_GlobOptFuncCC, Extrema_ExtCC, Extrema_ExtCC2d - implementation of GlobOptMin algorithm to extrema curve / curve
Extrema_CurveCache - deleted as obsolete code
ChFi3d_Builder.cxx - fixed processing of extrema
math_NewtonMinimum.cxx - fixed step to avoid incorrect behavior
Test cases modification to meet new behavior.
License statement text corrected; compiler warnings caused by Bison 2.41 disabled for MSVC; a few other compiler warnings on 54-bit Windows eliminated by appropriate type cast
Wrong license statements corrected in several files.
Copyright and license statements added in XSD and GLSL files.
Copyright year updated in some files.
Obsolete documentation files removed from DrawResources.
When warnings are enabled, compilers report lots of occurrences
of unused local variables, which makes it harder to find other
meaningful warnings.
This commit does not fix all unused local variables.
Fix new type conversion warning
Code cleaned to avoid MSVC compiler warnings on unused function arguments.
Several useless pieces of code are removed.
Changes in IntTools_EdgeFace.cxx, Blend_Walking_1.gxx, Bnd_BoundSortBox.cxx, ProjLib_ProjectedCurve.cxx are reverted (separated to specific issue for more in-depth analysis).
