1. BRepLib.cxx: calculation of 2d tolerance is changed in method BRepLib::SameParameter(Edge..)
2. Geom2dConvert.cxx: incorrect comparing
"SquareDistance < tolerance"
is replaced by
"SquareDistance < tolerance*tolerance"
because tolerance is linear value.
1. src\BRepSweep\BRepSweep_NumLinearRegularSweep.cxx
Fix bug by adding result in list of generated shapes, if initial shape is vertex, edge or face.
2. src\BRepLib\BRepLib.cxx
Add protection against treatment not geometric edge in BRepLib::UpdateInnerTolerances(...)
3. Add test case for bug and correct test for bug 30346 according to new behavior of algorithm
1. new file Standard_Dump to prepare and parse Dump in JSON format for OCCT objects
2. some presentations cover the proposed dump functionality.
3. 'bounding', 'vaspects' has '-dumpJson' field to see the DumpJson result
4. Bnd_Box constructor with min/max points is implemented to use Dump of this class in Dump BVH_Box
5. Limitation (some classes of Graphic3d, Prs3d has not full filling for DumpJson)
Method BRepOffset::Surface() is used in simple offset algorithm to create offset surface, instead of direct and unconditional construction of new Geom_OffsetSurface instance.
Added test bugs modalg_7 bug29334
Refactoring of the Line-Line intersection method strengthening the parallel and coincidence criteria to allow almost parallel lines have an intersection point.
The regression caused by the patch for 0030534 has been eliminated. For that the method InsertWiresIntoFaces() has been corrected: the face to which a wire is added is first oriented as forward.
New folder "hlr" with subfolders "exact_hlr" and "poly_hlr" has been created.
Draw command "vcomputehlr" has been corrected.
QA command "OCC27341" has been deleted as "vcomputehlr" does its job.
1. Add method TransformPCurves to ShapeUpgrade_UnifySameDomain - to rotate and translate existing pcurves instead of projecting.
2. Modify method ShapeUpgrade_UnifySameDomain::IntUnifyFaces - now it does not apply ShapeFix to new wires and new faces.
3. In the method UnifyEdges: add merging degenerated edges.
BRepFill_TrimShellCorner::CheckAndOrientEdges() - When orienting next edge in a sequence take into account the Orientation of the previous edge.
Test cases for the issue.
Protect IntTools_EdgeEdge::FindSolutions method from cases where splitting edge on parts does not give bounding box decreasing.
Use at least Epsilon from edges parameters as a step in BRepLib::FindValidRange.
Test case for the issue.
Add possibility of construction of the Optimal Oriented Bounding Box from set of points (the case of shape with triangulation).
The interface of the BRepBndLib::AddOBB method is not changed, but the option <theIsOptimal> now controls also the construction of the OBB from Set of points.
The slightly modified DiTo algorithm will be used, checking all possible axes created by the extreme points.
The performance of the construction of the Optimal OBB is lower but the quality is usually much higher (can't be worse by definition).
Test cases for the issue.
Modification in static method BoundedArc of IntStart_SearchOnBoundaries:
add exact intersection of canonical curve-surface (when Func is IntPatch_ArcFunction).
Evaluator of offset surface has been protected against evaluation at infinite parameters. Now it throws exception when evaluating such data.
The methods IsUClosed and IsVClosed of the class ShapeAnalysis_Surface have been corrected to avoid evaluation of the surface at infinite parameters (fighting with regressions "parasolid doc_3 E3" and "parasolid doc_2 A3" in products).
BRepPrimAPI_MakeRevol.cxx, hxx
Insert checking of self-intersecting of generated surfaces in MakeRevol
BRepTest_SweepCommands.cxx
Adjusting command revol to current behavior of MakeRevol algorithm.
Method Segment() of B-spline curve and surface has been extended by parameter theTolerance (theUTolerance and theVTolerance for surface), which defines the proximity between knots of a NURBS and boundaries of cutting segment. The default value of the tolerance is Precision::PConfusion().
Test cases have been added to check segmenting of B-spline surface and curves both 2D and 3D.
draw_test_harness.md - description of new options in Draw commands
AppDef_BSplineCompute.hxx, BRepApprox_TheComputeLineOfApprox.hxx, GeomInt_TheComputeLineOfWLApprox.hxx, Approx_BSplComputeLine.gxx - implementation of method SetPeriodic(...) and implementation periodic boundary conditions for multiline in order to get periodic multicurve.
GeomAPI_PointsToBSplineSurface.hxx, GeomAPI_PointsToBSplineSurface.cxx - adding new parameter for methods Init(...) and Interpolate(...), implementation of building periodic tangents for first and last AppDef_MultiPointConstraint of multiline for U direction of surface.
GeometryTest_APICommands.cxx - implementation of new functionality in Draw command surfapp and surfint
GeomFill_NSections.cxx
Fixing problem with bugs modalg_3 bug606_2
1. Approx_ComputeCLine.gxx, Approx_FitAndDivide.hxx, Approx_FitAndDivide2d.hxx, BRepFill_ComputeCLine.hxx
It is base modification, which allows improve performance of approximation with help of Approx_ComputeCLine. The main idea of improvement is using degree selection by inverse order - from maxdegree to mindegree. If tolerance for maxdegree is not reached, there is no sense to make approximation for current number of knots with lower degree, it is necessary to cut parametric interval.
2. ProjLib_ComputeApprox, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ComputeApproxOnPolarSurface, ProjLib_ProjectOnPlane
It is additional modification of methods using Approx_ComputeCLine.
Mainly, modifications concern to more optimal choosing parameters for approximation algorithm.
3. BRepCheck_Face
Small improvement of method Intersect(...), which intersects two wires on face.
4. BRepTopAdaptor_FClass2d
Impovement of treatment infinitely narrow faces.
5. ChFi3d/ChFi3d_Builder_6.cxx
Small improvement, which forbids extension of singular boundary of surface.
It was TODO problem in tests/bugs/modalg_7/bug27711_3
6. IntTools_EdgeEdge.cxx
Improvement of performance for cases of searching common parts between line and analytical curve
7. GeomliteTest_CurveCommands.cxx
Adding Draw command fitcurve. This command is analog of approxcurve, but uses Approx_FitAndDivide algorithm.
Mainly to have direct draw command for testing Approx_ComputeCLine.
8. Extrema_ExtElC.cxx
Treatment of case "infinite solutions" for extrema line-ellipse
9. Modification of some tests according to new behavior of algorithm.
10. tests/perf/moddata/bug30435
Test for new improved algorithm.
11. Implementation QAcommand OCC30435 in QABugs_20.cxx used in test bug30435
Method for calculation of correct number of sampling points is added for
Adaptor2d_OffsetCurve.
Now number of sampling points correspond with similar method for
Geom2dAdaptor_Curve for curve type GeomAbs_OffsetCurve
Test case added
Constructor of GeomFill_SectionPlacement has been corrected: add correction of boundaries of curve to avoid mistake of LocateU in the case when the curve is BSpline.
Plane/Torus intersection: take into account the Plane-Torus distance sign to compute the correct location of the section curve.
Test case for the issue.
The following improvements have been implemented in BRepLib_MakeWire class to make it more reliable:
1. Quit adding edges of a wire into result if the current edges have not been added. Return NotDone status.
2. Allow merging not only bounding vertices (connected to only one edge) but also the middle ones, so the multi-connected vertices may appear in the result.
Test case for the issue.
Fixed incorrect array allocation within GeomEvaluator_OffsetSurface::CalculateDN()
and protection against assigning out-of-range values in case of non-square
number of U and V derivatives on surface.
1. Rewrite the method BRepTools::DetectClosedness.
2. Correct the method BRepOffset_Tool::EnLargeFace to process properly non-periodic but closed faces.
Implementation of method "IsDeleted(...)" for MakeRevol and MakePrism algorithms.
Problem (exception) occurs during history building and was caused by an attempt to obtain generated shape for subshape, which was really "deleted" by algorithm - this input subshape and its possible generated shape was not used in result.
Two test cases are added. One for Boolean operation (it is good, because BO has been fixed already), and another for fixshape operation (it causes Draw crash).
Implementation of the new class *BOPAlgo_MakePeriodic* for making the shape periodic in 3D space.
Periodicity of the shape means that the shape can be repeated in any periodic direction any number of times without creation of the new geometry or splits.
The idea of this algorithm is to make the shape look similarly on the opposite sides or on the period bounds of periodic directions.
It does not mean that the opposite sides of the shape will be mirrored. It just means the the opposite sides of the shape should be split by each other and obtain the same geometry on opposite sides.
Such approach will allow repeating the shape, i.e. translating the copy of a shape on the period, without creation of new geometry because there will be no coinciding parts of different dimension.
Draw commands for the new algorithm:
* makeperiodic - makes the shape periodic in required directions;
* repeatshape - repeats the periodic shape in requested periodic direction;
* periodictwins - returns the periodic twins for the shape;
* clearrepetitions - clears all previous repetitions of the periodic shape.
Documentation & test cases for the algorithm.
Now end points of intervals calculated in GeomAdapter_Curve are not replaced by GeomAdapter_Surface.
Left bound of periodic curve less than UMin is not corrupted by LocateParameter during intervals calculating.
Two new functionalities have been added in BRepFilletAPI_MakeChamfer:
- constant throat (the section of chamfer is isosceles triangle, its height is constant in all sections - this is the "throat" of the weld);
- constant throat with penetration(the section of chamfer is right-angled triangle, the first of two surfaces (where is the top of the chamfer) is virtually moved inside the solid by offset operation, the apex of the section is on the intersection curve between moved surface and second surface, right angle is at the top of the chamfer, the length of the leg from apex to top is constant - this is the "throat" of the weld).
- New abstract classes BlendFunc_GenChamfer and BlendFunc_GenChamfInv have been added;
- Class BlendFunc_Chamfer is now descended from BlendFunc_GenChamfer, class BlendFunc_ChamfInv is now descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroat is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatInv is descended from BlendFunc_GenChamfInv.
- New class BlendFunc_ConstThroatWithPenetration is descended from BlendFunc_GenChamfer, new class BlendFund_ConstThroatWithPenetrationInv is descended from BlendFunc_GenChamfInv.
- Class ChFi3d_ChBuilder has now mode of chamfer that can be ClassicChamfer, ConstThroatChamfer and ConstThroatWithPenetrationChamfer.
- Two new DRAW Test Harness commands "chamf_throat" ant "chamf_throat_with_penetration" have been added for the second mode of ChBuilder.
- The interface of DRAW Test Harness command "chamf" changed for symmetric case.
The reason of this problem is in wrong work of classifier algorithm (see the message ~0080992 to the issue #30354). Therefore, the algorithm of IntTools_FClass2d class has been improved. Namely, now orientation of the polygon is computed from area-criterion instead of angle. As result, some simplification of the method IntTools_FClass2d::Init(...) has been made.
<!break>
1. New constructor has been added to the class CSLib_Class2d. It allows applying TColgp_SequenceOfPnt2d.
2. DRAW-commands "addpolygonnode" and "polygonprops" have been created. They are covered by the test case "tests/geometry/2dpolygon/A1".
3. New method Poly::PolygonProperties(...) has been created. See help for detailed information.
4. New testgrid "lowalgos classifier" has been created.
The misprint leading to the problems was fixed.
"Draw" tests were created to check the fix.
"Draw" test bugs/modalg_7/bug28784 was corrected
for right changes of the results.
