ProjLib_Cone.cxx - correction wrong calculation of projection line on cone
GeomInt_IntSS_1.cxx - modification of method BuildPCurves(...) - adjusting first or last knots of 2d Curve
ProjLib_ComputeApprox.cxx - modification of method Function_SetUVBounds(...) for case projecting line on cone.
Modification of tests - removing first TODO
Test case for issue #27322
1. New sharing algorithm has been implemented. If intermediate point of some edge is included in the tube with center taken in another edge and radius equaled to maximal vertex-tolerance of both edges then these two edges are considered to be shared. This know-how touches edges only, which have common blocks with interfered faces. If they do not have any common-blocks the algorithm will work as before.
2. Interface of BOPAlgo_PaveFiller::IsExistingPaveBlock(...) method has been changed.
Creation of test case for issues #27128 and #27179
Adjusting some test cases according to their new behavior, because they are IMPROVEMENTS really (TODOs have been deleted).
1. Processing when IntPatch_WLine/IntPatch_RLine goes through the seam edge has been improved in DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx).
2. Incorrect initialization of last point of IntPatch_WLine/IntPatch_RLine has been eliminated. Earlier it was the reason of exception.
Creation of test case for this issue.
Adjusting some test cases according to their new behavior. Namely:
1) tests\bugs\modalg_4\bug825 (bug825_2)
Details are described in issue #25915. In short, new intersection algorithm works better than old (WLine without "jumping"). However, Boolean operation loses degenerated edges of the sphere. Consequently, we get the result with Not-closed face.
2) tests\bugs\modalg_6\bug26684_2
TolReached of intersection curve has become smaller. Consequently, intersection algorithm works better than earlier.
0026796: The result of General Fuse operation is self-intersecting shape
The fix forces creation of new sub-shapes (vertex, edge) when the tolerance of some sub-shape of an argument is to be increased.
This new behavior is turned off by default. It can be turned on using two ways:
1) Setting 'locking' flag of the arguments.
2) Calling the method SetNonDestructive(Standard_True) of the API classes.
Various bug fixes in the algorithm:
- Compute correct tolerance values for intersections of type Line/Line, Line/Plane, Plane/Plane.
- In case of Line/Plane intersection check if line's vertices lie on the plane.
- Do not allow decreasing of the tolerance value of the Line/Line intersection vertex.
- In IntTools_EdgeEdge, call the method FindParameters with proper 3D tolerance of the curve.
- Force making copy of a degenerated edge if its vertex is touched but no 2D intersection with other curves is found.
- Remove pave blocks both ends of which became referring to the same vertex after vertices substitution.
- Avoid exception in IntTools_Context::IsVertexOnLine if Extrema is not done.
- Reduce tolerance of vertex/edge using actual distances to interfered shapes if it was increased due to line/line, line/plane, or plane/plane small intersection angle.
- Update tolerance of edges to reach all representations in a common block.
- In V-E intersections, check if a vertex hits beyond shrunk range, in such case create V-V interference.
- Do not put a section edge to the result if it becomes to be a micro edge after updating its vertex.
- Correctly make vertices same-domain during the work of MakeBlocks.
- Decrease shrunk range at least on a Precision::Confusion() in addition to vertex tolerance.
- Add Confusion to bounding boxes of new shapes in DS
- Add tolerance Precision::Confusion() to compare distances of touching cases to fix regressions.
TODO marks have been removed from (or modified in) the following test cases (Improvements):
boolean bsection M3 N2 R2
boolean gdml_private B6 C2 C6 G7 I6 F6 J1 J4 M7 N1 N8 N9 O3 O4 O6 O8 O9 P1 P2 P5 Q1 Q3 Q5 S9 T2 U4 U5 U9 ZB5 ZB6 ZC1 ZC5 ZD3 ZD6 ZD7 ZH2 ZH5 ZI2 ZI5 ZI7 ZI9 ZJ3 ZJ4 ZJ7 F8 I6 G1
boolean volumemaker A5 A6 B3 B4 B7 B9 D3 D4 D7 F1
boolean bopcut_2d D5
bugs modalg_5 bug25043
bugs modalg_2 bug472_1 bug472_2 bug472_3
Test cases updated because they are still bad but can be accepted as non-regression:
boolean volumemaker C4 A3 A7 E6
bugs modalg_1 bug10232
boolean bsection N2
Put new TODO in the scripts:
bugs modalg_5 bug25232_9
bugs modalg_6 bug26619
bugs modalg_1 buc60462_2
bugs modalg_4 bug772
For the following tests the result in fix became better, so take fix result as the reference:
bugs modalg_5 bug24628
bugs modalg_6 bug26954_3
boolean volumemaker A4 B5 B6 C3 C8 D2 D5 F2
bugs modalg_2 bug472_2
bugs modalg_1 buc60776_1
- Add the method SetNonDestructive to API classes of user level
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
Poles bounding box for curve added for bezier and bspline curves.
Method Poles() for Bezier curve added.
Test case for issue CR26560
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
Test cases are updated to the new behavior.
Changed the rules for the types of the arguments for different operations:
1. FUSE: All arguments and tools should have the same dimension;
2. CUT: The MAXIMAL dimension of the ARGUMENTS should be less
or equal to the MINIMAL dimension of the TOOLS;
3. CUT21: The MINIMAL dimension of ARGUMENTS should be grater
or equal to the MAXIMAL dimension of the TOOLS;
4. COMMON: The arguments and tools could have any dimensions.
For the arguments of collection type (WIRE, SHELL, COMPSOLID)
the type will be passed into the result of the operation.
The documentation should be updated according to new behavior.
Documentation has been updated.
Implemented suggestions by MSV and some grammar changes.
Test cases for issue CR26565
Correction of test cases for issue CR26565
Correction of test cases for issue CR26565
Method for preanalysis of input data added (CheckInputData).
Now it is possible to work with Error() function, which return error code.
Extended output support for all offset commands added.
Test-cases for issue #26556
I ComputePurgedWLine() function:
Excess points in walking line are deleted when:
1) Distance between neighboring points too small.
2) Points lie in one pipe without big jump on chord length.
III
Fixed problem with extremaPC with too close knot distribution to [minParam, maxParam] borders.
IV ApproxInt_Approx.gxx
New division criteria in intersection approximator.
III Test case
Test cases update to the new behavior.
Test case for CR21564
Correction of test cases for issue CR21564
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
All uses of "MDTV-Standard" and "MDTV-Design" in tests changed to "BinOcaf", and "MDTV-XCAF" changed to "BinXCAF".
Formats changed: .std to .cbf, .dxc to .dbf.
Test groups renamed accordingly:
xcaf: brep_to_dxc -> brep_to_xbf, igs_to_dxc -> igs_to_xbf, stp_to_dxc -> stp_to_xbf, dxc -> xbf/A1, dxc_add_CL -> xbf_add_CL
xml: ocaf_std -> ocaf_cbf, xcaf_dxc -> xcaf_xbf
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
1. Unification of the polygons creation (it is regardless of arguments order).
2. Output of 2dintersect DRAW-command was changed.
3. Geom2dGcc_Circ2d2TanRadGeo.cxx:
Precise intersection point found by Extrema Curve-Curve method (dot product between every tangent vector and vector between points on two curves must be equal to zero).
4. Some comments have been translated from French to English.
Some test case have been updated.
Changes in accordance with the last remark
Test case for issue CR25593
bugs/modalg_4/bug8842_7 - test stable OK (removed TODOs).
bugs/modalg_2/bug453_2 - added ?TODO according to unstable behavior (#25918)
bugs/moddata_1/bug22759 - updated reference data
bugs/vis/bug21091_4 bug21091_5 bug21091_6 bug21091_9 - updated reference data
sewing/tol_100/K1 - added ?TODO according to unstable behavior (test will be removed in #25471)
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
1. bugs modalg_4 bug697_2 bug697_4 bug697_7 bug697_8 - unstable test cases after fix 25735
Its will be checked and modified during work with performance (issue 24232).
2. bugs mesh bug25364 was tuned for 64-bit Windows.
3. de step_1 ZQ2 fails (64-bit only). Issue 25848 was registered.
4. de step_3 D8 shows improvement (no checkape error) in 64-bit only, this is after 22598 and issue 25797 was registered for that.
5. draft angle G8 improvement (algorithm produces some shape, but fails on checkshape).
6. perf ncollection A1 was tuned for 64-bit Windows.
7. de step_1 R9 - update reference data (according to 25176)
Updated test-cases from branch CR24255_3
0024255: Regressions in test cases on OCCT vc9 win64 Release
Small refactoring.
Fix for CASE bugs modalg_5 bug25298_09: FAILED (error)
Test-cases correction (bugs modalg_5 bugs25804_1, bug25704_2)
Changes:
class BRepCheck_Solid
method:
void BRepCheck_Solid::Minimum()
has been changed. The treatment of shells with INTERNAL faces has been added.
Added test case bugs/modalg_5/bug25735
Added TODOs in test cases according to issue 25735.
Do not clean polygons that are created for different faces not connected with current shape.
Remove old code producing additional points for BSpline curves due to fix#24959.
Test cases fir issue CR25469
Revert changes producing additional points for BSpline curves with C1 continuity
Test cases fir issue CR25469
Correction of test cases for issue CR25469
1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
1. New status "BRepCheck_InvalidPolygonOnTriangulation" is added.
2. Small correction of output of "checkshape" command result.
Test cases were changed.
Test case for issue CR25109
Some test cases were changed according to their new behavior.
class IntTools_Tools
method
Standard_Boolean IntTools_Tools::AdjustPeriodic
(const Standard_Real thePar,
const Standard_Real theParMin,
const Standard_Real theParMax,
const Standard_Real thePeriod,
Standard_Real &theNewPar,
Standard_Real &theOffset,
const Standard_Real theEps)
The new function has been implemented for fast adjustment of pcurves to the range of surface.
Test case correction for issue CR24981
From now on, the panning behavior of V3d_View completely corresponds to equal operations with camera. There is no more confusing "Center" property and "ProjectionShift" which were used to introduce composite panning, while respecting view referential points: At, Eye unchanged. The V3d_View::FitAll approach has been rewritten to do "fit all" geometrically, operating with frustum, to make it working for both orthographic and perspective projections.
1) Getting rid of ProjectionShift and Center property:
- Removed ProjectionShift property of Graphic3d_Camera.
- Removed confusing Center property of V3d_View (related to projection shift).
- Removed redundant code related to the Center property of V3d_View.
- Removed WindowLimit method of Graphic3d_Camera - no more used.
2) Improvements of fit all and selector:
- Improved FitAll operation of V3d_View and reused it in NIS_View - the perspective projection is now handled correctly.
- Revised code of Select3D_Projector class - can be defined with any given projection and model-view matrices.
- Modified StdSelect_ViewerSelector3d and ensured that panning, zooming and going into the view do not lead to unwanted re-projection of sensitives. The handling of perspective selection is revised.
- Take into account graphical boundaries of infinite structure on ZFitAll.
3) Improvements of camera:
- Introduced new z range scale parameter for V3d_View::AutoZFit. See, V3d_View::AutoZFitMode.
- Allow negative ZNear, ZFar for orthographic camera to avoid clipping of viewed model.
- Moved camera ZNear, ZFar validity checks to V3d_View level.
- Use more meaningful Standard_ShortReal relative precision for ZNear, ZFar ranges computed by ZFitAll.
- Use Standard_Real type for camera projection and orientation matrices.
- Extended camera to generate both Standard_Real and Standard_ShortReal transformation matrices using the same matrix evaluation methods and converted input parameters.
Correcting picking tests for perspective view
Modify v3d face test cases for 1px changes in face picking
Modified test cases for new arguments of vviewparams DRAWEXE command
Main changes are in "IntWalk_IWalking::TestDeflection(...)" function (IntWalk_IWalking_5.gxx).
Some test cases were corrected according to their new behavior.
1. Checking, if intersection curve is collapsed, is added. (file GeomInt_LineConstructor.cxx)
2. Earlier, intersection line was considered as valid if only mid-point of every interval of this line is into two intersected surfaces (with given tolerance). That's no good because after inserting of new points, old points, which is considered as valid only because they are into beginning or into end of interval (therefore, they was not checked), moved to mid of interval and became invalid. Therefore, checking for first and last points was added. (file GeomInt_LineConstructor.cxx)
3. Intersection line became valid (see bug description) after adding of new additional points into it (file IntPatch_PrmPrmIntersection.cxx). Methods for finding and adding of new points were added. (file IntWalk_PWalking_1.gxx)
Some test cases were changed.
Test cases for issue CR24472
Incorrect curve is got after Decompose method applying. This method's using should be restrict.
Decomposition is required if intersection curve contains some parts, where U-parameter on quadric surface changes too sharply.
Decompose method is called for Cone and Sphere only (it does not require for Cylinder).
Comments are changed by jgv.
Test case for issue CR24427
Added test case bugs/moddata_3/bug24427_2
Compiler warning is liquidated.
Test is corrected.
Added test case bugs/modalg_5/bug24204
Modified following test cases:
bugs modalg_3 bug605 - case with bad input data, command "settolerance w1 1.e-7" was added;
bugs modalg_4 bug629 - wrong case, now the algorithm can not build pipes on such profiles, test case was removed;
bugs modalg_4 bug13595_1, bug13595_1 - number of subshapes was has changed;
bugs modalg_5 bug23706_2 - square of resulting face was changed;
bugs modalg_5 bug23870_1, bug23870_2, bug23870_3, bug23870_4, bug23870_5 - the number of subshapes was changed.
1. Function QuasiFleche(...) does not call for small edges.
2. Forbid to work with NULL-shapes in OffsetWire::FixHoles(...) function.
3. ProjOnCurve(...) function in Bisector_BisecCC.cxx file returns status (DONE or NOT DONE).
Modifications 1
1. To avoid creation of micro edges in the class BOPAlgo_PaveFiller added two new functions ForceInterfVE and
ForceInterfVF which updates tolerance of Vertex to make it interfere with Edge and Face accordingly.
2. In the class BOPInt_Tools added new function IsInRange which checks whether two ranges cross each other.
3. In the class BOPTools_AlgoTools added new function IntersectCurves2d which intersects pcurves of the face
to check it on the self-interference.
4. In the function IntTools_BeanFaceIntersector::FastComputeExactIntersection() the check on the coincidence of the whole
edge with the face (BOPTools_AlgoTools::IsBlockInOnFace) replaced with the check on the coincidence of one intermediate point with that face.
5. Test cases bugs modalg_1 bug1255, bug1255_1 has been updated with more correct value of the result.
6. TODO statement has been removed from the test cases boolean bcut_complex B1,B3,B5,C2,C4,C6,C8 as they are correct.
Adding test case for issue CR23958
Modification 2
1. In class BOPAlgo_PaveFiller added new function CheckPlanes(nF1, nF2) that checks whether two planar faces have common or intersecting sub shapes.
If these two faces do not have such sub shapes there is no need to intersect them.
2. In the function BOPAlgo_PaveFiller::MakeBlocks() added block for reducing the tolerance values to the previous state for the vertices
that were put on the section curve (with increasing of its tolerance value) that was rejected by the algorithm.
Modification 3
Back to Extrema_ExtAlgo_Grad algorithm in extrema computations in Boolean Operations algorithm.
I. New features:
no New features.
II. Changes:
II.1. class : BOPAlgo_Builder
- method:
void BOPAlgo_Builder::FillIn3DParts(BOPCol_DataMapOfShapeListOfShape& ,
BOPCol_DataMapOfShapeShape& ,
const BOPCol_BaseAllocator& )
The algorithm of finding 3D-parts for solids has ben changed.
To improve the performance the unbalanced binary tree is used.
II.2. class : BOPTools_AlgoTools
- method:
Standard_Boolean BOPTools_AlgoTools::GetFaceOff
(const TopoDS_Edge&,
const TopoDS_Face&
BOPTools_ListOfCoupleOfShape& ,
TopoDS_Face&
Handle(BOPInt_Context& )
The data treatment for tangent cases has been changed
III. Modified entities:
packages:
BOPAlgo
BOPTools
Small corrections of test cases
bugs/end script was edited to dump results from all opened views; duplicated vinit was deleted from bug625. QABugs::OCC280()
was edited to work with multiviews;ViewerInit() method was corrected. vviewlist command was modificated to output string.
Small corrections
Compile errors were corrected
