1. DRAW-commands for curve/surface continuity returning were changed.
2. Output of "distmini" DRAW-command is amended.
3. Function MinMax() was moved from Standard_Real to IntPatch_ImpImpIntersection_4.gxx.
4. Incorrect computing of nbcurveC1 in Geom2dConvert::C0BSplineToC1BSplineCurve(...) function was liquidated.
Test cases were changed.
Method BRep_Tool::IsClosed() extended to analyze closure of wires in addition to shells and solids.
External and Internal edges and vertices are ignored in this check.
Analysis of compounds is disabled.
Update of flag Closed according to actual state is added in most places where new shells are constructed.
Draw-command and test case for issue CR25202
1. New status "BRepCheck_InvalidPolygonOnTriangulation" is added.
2. Small correction of output of "checkshape" command result.
Test cases were changed.
Test case for issue CR25109
Some test cases were changed according to their new behavior.
class ProjLib_ComputeApprox
method
ProjLib_ComputeApprox::ProjLib_ComputeApprox
(const Handle(Adaptor3d_HCurve) & C,
const Handle(Adaptor3d_HSurface) & S,
const Standard_Real Tol )
Using Precision::PConfusion() as a 2d tolerance when shifting the projected curve.
Test case for issue CR25223
The patch changes the algorithm of choosing the initial approximation for Newton's method. Instead of searching for a point on the fine shifted grid, the algorithm performs initial search for candidate points in the original coarse grid (which is cached in new version). After that particle swarm optimization (PSO) is used to localize the global minimum. This algorithm optimizes a problem by having a population of candidate solutions ("particles"), and moving these particles around in the search-space according to simple mathematical formula over the particle's position and velocity. Each particle's movement is influenced by its local best known position but, is also guided toward the best known positions in the search-space, which are updated as better positions are found by other particles. This strategy has reported good results in solving complex global optimization problems.
Current patch implements initial version of PSO for using in Extrema_GenExtCS class. Typically new approach allows to reduce the number of evaluations by 5-10 times. There are only few cases there the numbers of evaluations are comparable.
Consider angular tolerance during calculation of angle between two vectors for protection against deviations that are significantly less than tolerance.
Simplified code to reduce number of comparison
Added QA command OCC24945 and test case bugs/moddata_3/bug24945
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
math_GlobOptMin - new global optimization minimization algorithm
Extrema_GlobOptFuncCC, Extrema_ExtCC, Extrema_ExtCC2d - implementation of GlobOptMin algorithm to extrema curve / curve
Extrema_CurveCache - deleted as obsolete code
ChFi3d_Builder.cxx - fixed processing of extrema
math_NewtonMinimum.cxx - fixed step to avoid incorrect behavior
Test cases modification to meet new behavior.
For fix this case in method Geom2dInt_Geom2dCurveTool::NBSamples() number of samples for 2d offset and trimmed curve is computed as max value from number of samples for other curve and number of samples for basis curve.
Test case for issue CR24800
DRAW command "vertex" was extended to create vertex from point.
DRAW command "extrema" was extended and unified: both extrema points are outputted to DRAW in case of too close points;
parameters of extremal points are outputted.
35 shapes were added for anti-regression tests.
Second DRAW test was created for bug CR23830.
Move shapes to shape-repository
Incorrect curve is got after Decompose method applying. This method's using should be restrict.
Decomposition is required if intersection curve contains some parts, where U-parameter on quadric surface changes too sharply.
Decompose method is called for Cone and Sphere only (it does not require for Cylinder).
Comments are changed by jgv.
Test case for issue CR24427
Added test case bugs/moddata_3/bug24427_2
Compiler warning is liquidated.
Test is corrected.
DRAW command discrCurve was created to test GCPnts_UniformAbscissa by count of discretization point.
Two bugs in GCPnts_AbscissaPoint were fixed.
DRAW tests for the bug were created.
Tolerance of checking distance between vertex and edge in BOPInt_Context::ComputeVE() increased by additional Precision::Confusion() to allow for interference to be detected in this particular case.
Two tests added for this issue: one with original shapes and another in rotated co-ordinates
Added treatment of the vertex as a single object.
Added test case bugs/modalg_5/bug24060
Modified shape's extension in test cases bugs/moddata_3/bug23943_3 bug23943_4
Modified test cases in group de according to new reference data in issue 24035
1. Trimmed Surfaces were replaced with bases for *.igs and *.stp file format.
BRepLib_MakeFace method sets the TRIMMED surface of Geom_RectangularTrimmedSurface in created face.
2. Adding test case for this fix
1. Approximation of derivative (by Taylor-series and by three points).
2. Some methods (Degree(), GetType(), D0(), D3(), DN()) are added.
3. Getting of subInterval's boundaries.
4. Algorithm for checking if 1st derivative is equal to zero is amended.
5. Cases are controlled when extrema or Project point do not exist.
6. GetNormal() function for gp_Vec2d was added.
7. Computing of Value, D0, D1, D2 and D3 for offset curves was changed.
8. Limitation of tolerance for derivative computing was added.
9. Methods for computing trihedron in singularity point are added.
10. Test tests/bugs/moddata_3/bug23706 is added.
11. Restriction on the LastParameter for visualization of 3-D curves. Calling PlotCurve(...) function for last interval.
12. LProp package is modified for tangent computing in singularity point (LProp_CLProps, LProp_SLProps).
13. Added test cases for issue.
Deleting bad test cases for this fix
In parallel mode, limit number of jobs in the queue to avoid slowdown occurring with long queues
Obsolete DRAW tools removed
Improvement of processing of test log:
- log is collected as list and not as string for better performance
- short table of test cases (TOC) is added in HTML log
- algorithm to combine test cases in one row in HTML log is improved to avoid long lines (group bugs)
Parse rules corrected to ignore irrelevant debug messages, and to correctly report tests 3rdparty export as skipped or BAD when Gl2Ps is missing or is built in incompatible mode on windows
Tests corrected to pass in Debug mode on Windows
Data member myIsDivergent was added to class math_FunctionSetRoot.
The member is initialized in method Perform start by Standard_False. The member is changed in the method to Standard_True if an approximation point is located outside of search set.
Method IsDivergent was added to class math_FunctionSetRoot.
The method returns value of myIsDivergent.
Parameter theStopOnDivergent with default value Standard_False was added to
a constructor and method Perform of class math_FunctionSetRoot.
The parameter shows whether return from method Perform if myIsDivergent
became Standard_True.
Class Extrema_GenExtCS was optimized for dynamic memory consumption:
the class surface values are not stored now.
Method Perform of class Extrema_GenExtCS was improved for local extreme
search in case of iteration algorithm divergence. Size of the algorithm
grid cell for initial approximation is reduced by 2 in the case. The count
of the reduces is limited.
Build fix in *.cdl.
Case of extrusion was carried out of the repeat loop.
Division method of the 3-dimensional grid (curve param, surface first
param, surface second param) by two was replaced by method of moving the
grid.
The moving method is about two times faster than division method.
Now grid moving method is depending on some average linear sizes of the curve and the surface.
In case (theStopOnDivergent && myIsDivergent) method math_FunctionSetRoot::Perform sets Done to Standard_False and discard it's last solution.
Test case for the bug fix.
Test case correction
Initial approximation was corrected for search of maximum in Extrema_GenExtCS::Perform.
Test case bugs moddata_3 bug23830 was formatted.
