OpenGl_LayerList::renderTransparent() - color mask is now set to write into Alpha channel of depth peeling FBOs.
OpenGl_View::blitBuffers() - avoid using undefined color for glClear(GL_COLOR_BUFFER_BIT) operation.
Added new rendering parameter Graphic3d_RenderingParams::FontHinting
allowing to enable/disable hinting (default is no hinting preserving old behavior).
Command vrenderparams has been extended with arguments -fontHinting.
BOPTools_AlgoTools2D::MakePCurveOnFace(...): extension of surface for projection with large tolerance is added.
test/bugs/modalg_7/bug32106 : new test case added
IVtk_IShapeData::InsertCoordinate() has been replaced by IVtk_IShapeData::InsertPoint()
defining vertex position with surface normal.
IVtkVTK_ShapeData now allocates normals array within vtkPolyData.
IVtkOCC_ShapeMesher now fills in vertex positions with surfcae normals.
IVtkTools_SubPolyDataFilter has been corrected to optionally copy normals.
ivtksetboundingdraw command has been merged into "ivtksetdispmode -faceBoundaryDraw".
IVtkOCC_Shape now stores Prs3d_Drawer object used by IVtkOCC_ShapeMesher and IVtkOCC_SelectableObject.
IVtkOCC_ShapeMesher::internalBuild() made more consistent to AIS_Shape::Compute() in cleaning/triangulating shape.
Added command ivtkdefaults similar to vdefaults managing triangulation default parameters.
Extrema_GenExtCS.cxx: subdivision on intervals for periodic c curves is added
Extrema_FuncExtCS.hxx: access to fields mySqDist, myPoint1, myPoint2 is added
bug32225: new test case is added
Extrema_GenLocateExtPS.cxx, Extrema_GenLocateExtPS.hxx:
Adjusting tolerances according to surface sizes is added.
Additional methods for searching solution are added for cases if basic method fails.
Extrema_FuncPSDist.cxx - small bug fixing.
BRepFill_TrimShellCorner.cxx - fixing regression
ChFi3d_Builder_CnCrn.cxx setting parameters for Plate algorithm to improve stability of solution
ProjLib_ComputeApproxOnPolarSurface.cxx - code optimization
Some test cases are modified according to current state of Extrema algorithm
1) Extend Poly_Triangulation by mesh purpose, possibility to be cleared and late-load deferred data interfaces.
2) Update BRep_TFace to store list of triangulations istead of single one. And also active one. Update getter and setter of single triangulation and add new methods to interaction with whole triangulations list.
3) Update BRep_Tool to get single triangulation of face according to the input mesh purpose or whole triangulations list.
4) Update BRep_Builder to make face by not only single triangulation but whole triangulations list with specified active one.
5) Add new methods to BRepTools to interact with shape triangulations (Load/Unload/Activate/LoadAll/UnloadAllTriangulation(s))
6) Add new 'tlateload'command for shape to load/unload/activate triangulations.
7) Update 'trinfo' command by '-lods' options to print detailaed information about LODs of this shape
8) Support empty triangulations by selection. Use bounding box selection in this case.
9) Add new 'outdisplist' option to XDispaly command to print list of displayed objects to output variable but not to theDI
10) Add new '-noecho' option to vdisplay command to skip printing of displayed objects to theDI
11) Create new RWMesh_TriangulationSource as mesh data wrapper for delayed triangulation loading.
12) Create new RWMesh_TriangulationReader as base interface for reading primitive array from the buffer.
13) Cache nodes/triangles number defined in glTF file
14) Use RWMesh_TriangulationSource class as base of RWGltf_GltfLatePrimitiveArray one and RWMesh_TriangulationReader class as base of RWGltf_TriangulationReader one
15) Add possibilty to support of LODs by glTF reader. It is possible to skip data loading and load them later
16) Add new '-skiplateloading' (to skip triangulation loading), '-keeplate' (to keep information about deferred storage to load/unload triangulation later),
'-toprintdebuginfo' (to print additional debug information) options to ReadGltf command
17) Add new test of glTF late loading
Removed testgrids 'bugs/vis' and '3rdparty'; tests have been redistributed across other grids.
Moved testgrid 'v3d/ivtk' into dedicated 'vtk/ivtk'.
Added testgrid 'vselect' dedicated to 3D viewer picking/selection functionality
and filled with tests from 'v3d/vertex', 'v3d/face' and similar groups.
Added testgrid 'opengl' dedicated to OpenGL driver low-level functionality (GLSL programs and similar)
and filled with tests from 'v3d/glsl', 'v3d/raytrace', '3rdparty/fonts', 'bugs/vis' (portion) and similar.
Added testgrid 'opengles3' dedicated to OpenGL ES 3.0 driver low-level functionality
and reusing tests from 'opengl' testgrid.
Subgroup 'opengles3/raytrace' is disabled on Windows, as Ray-Tracing currently requires OpenGL ES 3.2.
while ANGLE library implements only OpenGL ES 3.0.
Added testgrid 'opengles2' dedicated to OpenGL ES 2.0 driver low-level functionality
and reusing a limited subset of passing tests from 'opengl' testgrid.
Currently testgrid is activated only on Windows platform when using ANGLE library
(properietary OpenGL ES drivers do not allow creation of restricted 2.0 context).
Test cases have been cleaned out to put bug description into log,
to properly load necessary plugins and to explicitly dump viewer.
1. Correct unification of circular edges: avoid trying to make an axis with null magnitude.
2. New method UnionPCurves: unify existing pcurves of chain instead of projecting the curve of unified edge onto surfaces
Added TKOpenGlTest and TKD3DHostTest Draw Harness plugins.
TKOpenGlTest is automatically loaded by ViewerTest::ViewerInit().
Commands vgldebug, vvbo, vcaps and vuserdraw have been moved to TKOpenGlTest.
New command vglshaders lists GLSL programs defined by OpenGl_GraphicDriver,
previously implemented by "vshaderprog -list".
Added new command vdriver for graphic driver selection.
Removed erroneous code from command vstereo.
PrsMgr_PresentationManager::Display(), PrsMgr_PresentationManager::Color(),
and SelectMgr_SelectionManager::Activate() now skip children in Erased state.
Added new property Graphic3d_Camera::IsZeroToOneDepth() and OpenGl_Caps::useZeroToOneDepth
for activating [0,1] depth range instead of [-1,1] range using glClipControl() within OpenGL 4.5+.
- Extended command Close with an option -silent
- Extended command Close to handle */-ALL for closing ALL document
- Replaced catch {Close D} by Close D -silent in tests
In test it should be taken into account that
lappend listmem [meminfo h]
checktrend $listmem 0 0 "Memory leak"
also gets memory (also about 100 bytes per iteration).
Added AIS_ViewController::MouseSelectionSchemes() property defining map of selection schemes for mouse+modifier combinations.
IsXOR flag has been replaced by AIS_SelectionScheme in interfaces.
Rubber-band selection with Shift key pressed now applies XOR selection scheme in in Draw Harness.
Command vselect has been extended to specify selection scheme by name.
Auxiliary AIS_GlobalStatus constructor has been removed.
AIS_InteractiveContext::setObjectStatus() no more adds
an invalid -1 mode to AIS_GlobalStatus.
Never updated property AIS_GlobalStatus::GetLayerIndex() has been removed;
AIS_InteractiveContext::SetTransformPersistence() has been corrected to use
ZLayer defined within object itself.
Command testgrid now includes vglinfo into summary.
Command vinit has been extended by -virtual option creating an offscreen window.
Command vglinfo now splits long values into multiple lines.
Added test case v3d/glsl/glinfo dumping OpenGL context creation info.
OpenGl_Window - fixed initialization of OpenGL 4.6 Core Profile (was limited to 4.5).
OpenGl_LayerList::renderLayer() - fixed usage of wrong camera while rendering shadowmap,
and apply Z-Layer origin shift to shadowmap matrix while applying shadow.
Added new class AIS_LightSource representing a light source presentation.
Graphic3d_TMF_CameraPers - added new mode to Graphic3d_TransformPers
defining 3D point relative to camera Eye position
- Upgraded files using new version of WinFlexBison
- Removed global variables within StepFile_Read.cxx
- Upgraded error message during bison analyzing ( added a expected expression information )
- Used 'Interface_ParamType' as argument type for the StepFile_ReadData::Argument
for a compatibility with the StepData/StepData_StepReaderData
- Added handling parse errors and transferring it to the StepData_StepReaderData
- Now parsing and referencing errors save in the check and non output by default
- Step_file's and Step_Data's output info prints according by trace level of printer
- Removed useless location.hxx
- Removed TraceLevel for the StepFile_Reader ( now it useless,
it is 0 by default and newer and nowhere change )
- Translate error message into English within StepData_StepReaderData
- Replace "Error" word in the output messages
Multiple changes in BRepOffset_MakeOffset algorithm:
- correct fusing vertices;
- correct building intersection edges;
- correct intersecting new edges in 2D;
- correct building wire on a new face;
- correct building history.
- Added checking for null objects
- Added support to find layers according to visible attr
- Fixed problem with same names of layers:
Now, layers are grouped by names and visibility parameter
