- class Graphic3d_HatchStyle is added to provide a possibility to set up custom and predefined hatching;
- added the ability to set custom hatch patterns through bitmaps;
- test case for issue #28107
1. The possibility to prevent addition of internal parts has been added into the following algorithms:
- BOPAlgo_BuilderFace;
- BOPAlgo_BuilderSolid;
- BOPAlgo_MakerVolume.
Setting the option to avoid internal parts for MakerVolume algorithm guarantees that the result solids
will be manifold and not contain any internal parts. But it does not prevent from occurrence
of the internal edges or vertices in the faces.
2. The Set/Get methods of the BOPAlgo_BuilderArea class have been made inline.
3. Draw command mkvolume has been updated to take into account the new option.
4. BRepOffset_MakeOffset::BuildShellsCompleteInter() has been modified to use the new option of BOPAlgo_MakerVolume
to speed up the construction of the final result solid.
5. Documentation has been updated with new section dedicated to BOPAlgo_MakerVolume algorithm.
6. Test case for the issue.
1. Unification of the usage of the BRepAdaptor_Surface in Boolean Operations algorithm.
For each face when it is necessary the Adaptor is initialized only once and stored in Context.
For that purpose the new IntTools_Context::SurfaceAdaptor(const TopoDS_Face&) method has been implemented.
To provide possibility to take the Adaptor from the context, the context has been added as
a parameter in following methods:
BOPTools_AlgoTools::MakePCurve()
BOPTools_AlgoTools::Sence()
BOPTools_AlgoTools2D::BuildPCurveForEdgeOnFace()
BOPTools_AlgoTools2D::PointOnSurface
BOPTools_AlgoTools2D::CurveOnSurface
BOPTools_AlgoTools2D::AdjustPCurveOnFace
BOPTools_AlgoTools2D::Make2D
BOPTools_AlgoTools2D::MakePCurveOnFace
BOPTools_AlgoTools3D::GetNormalToFaceOnEdge
It is also possible now to pass the context into BOPAlgo_WireSplitter algorithm.
Also, the new IntTools_Context::UVBounds(const TopoDS_Face&) method
has been implemented to get the UV bounds of a face.
2. Additional improvement is a calculation of reduced intersection range only for the intersection
type VERTEX during computation of Edge/Face interference.
3. The methods IntTools_EdgeFace::Prepare() and IntTools_EdgeFace::FindProjectableRoot()
and the fields IntTools_EdgeFace::myProjectableRanges and IntTools_EdgeFace::myFClass2d
have been removed as obsolete.
4. Test cases for the issue.
The Gluing operation is an additional option for the algorithms in the Boolean Component
such as General Fuse, Boolean operations, Section operation, Maker Volume and Cells Builder algorithms.
The Gluing options have been designed to speed up the computation of the interference among arguments of the operations on special cases,
in which the arguments may be overlapping but do not have real intersections between their sub-shapes.
This option cannot be used on the shapes having real intersections, like intersection vertex between edges,
or intersection vertex between edge and a face or intersection line between faces.
The Gluing option is an enumeration implemented in BOPAlgo_GlueEnum.hxx. There are following items in the enum:
* BOPAlgo_GlueOff - default value for the algorithms, Gluing is switched off;
* BOPAlgo_GlueShift - Glue option for shapes with partial coincidence;
* BOPAlgo_GlueFull - Glue option for shapes with full coincidence.
For setting the Gluing options for the algorithm it is just necessary to call the SetGlue(BOPAlgo_GlueEnum) method with appropriate Glue value.
For using this option in DRAW the command bglue has been implemented:
* 0 - default value, Gluing is off;
* 1 - for partial coincidence;
* 2 - for full coincidence
Elimination of the warnings.
In the case of infinite point due to not enough machine precision the distance from the point to each edge of the face is computed the same, and the algorithm cannot correctly select the nearest edge. To solve this problem checking of point was added, if the point is located too far from the bounding box of the face, then it will be replaced with another point located on the line between the point and the center of the bounding box.
The new point has the same state as initial one but its state can be resolved without ambiguity.
Corrections in CheckPoint method
Small correction of test case for issue CR27434
New topology-preserving offset algorithm has been added. It allows to construct offset shape of build solid.
test cases have been added.
Documentation has been updated to be up to date.
Minor corrections.
Grid is renamed for simplification purposes.
Old constructors are restored with Standard_DEPRECATED macros.
1. Correct building of the lists of intersection faces connected to the same vertex.
2. For the artificially invalid cases with only one invalid face avoid usage of the edges having same origins as invalid edges.
3. Test cases for the issue.
4. Test cases offset shape_type_i_c XM1, ZW*,ZX*,ZY* have been modified to provide more clear result.
5. TODO statements have been removed from the test case offset shape_type_i_c XE6 as it is OK.
6. Test case offset shape_type_i_c ZZ2 is improvement.
The method BRepGProp_Face::LKnots has been corrected to make proper initialization of the output data for the case of a circle.
Added test case bugs/modalg_6/bug27033
StepVisual_StyledItem::Item() now does not call IsKind() on NULL object.
Add several checks for NULL to import/export.
Add test case bugs/step/bug28147
OpenGl_LayerList::Render() now calls glDepthMask(GL_TRUE) before clearing depth buffer.
Depth buffer is now cleared even if ZLayer with this command has no structures.
1. Special usage of the common edges not belonging to any invalidity while rebuilding the invalid faces (method IntersectFaces() in BRepOffset_MakeOffset_1.cxx).
Such edges could only be extended to the valid faces boundaries, thus could only split the face and not create any new part.
2. Test cases for the issue.
Treatment of paths in Resource_Manager is corrected to handle properly paths with dots inside.
Extraction of extension from path in DOS mode when working on Linux is corrected in OSD_Path.
Test case added.
Mehtod HasIntersection added in NCollection_Map to check whether two given maps contain at least one same item.
'Draw' command and test to check the method were created.
The algorithm BRepExtrema_DistShapeShape has been protected against exceptions when non-geometric shape data is given on input, like a face containing triangulation only or an edge containing polygon only. Such faces/edges are ignored by the algorithm.
BRepGProps::VolumeProperties() now ignores faces without geometric surface to avoid access violation.
OpenGl_Workspace::BufferDump() now implicitly converts RGBA dump
into requested BGR, BGRA and RGB image.
DRAW command dversion is improved to report OpenGL variant used (desktop or ES); reporting of version of MSVC is corrected for VC14 and above; reporting of HAVE_OPENCL option is removed.
Usage of command vdump is corrected in some tests to specify extension .png for an image file.
Compiler warning is eliminated in OpenGl_Text.cxx (OpenGL ES mode only).
Check of the gap between ends of the p-curves having common vertex in the parametric space of face similar as in the class BRepCheck_Wire was added.
Check that face lies on the periodic surface was added.
Added check between ends of 2D curves in the 3D space and vertex the same which used in the BRepCheck_Wire::SelfIntersect
Test case for issue CR28094 has been created.
The whole piece of the walking line between two vertices is no more checked for having length greater than Precision::Confusion(). Instead, only full duplicate points (comparing with gp::Resolution()) are removed, allowing the resulting line have any non-null length.
The test bugs modalg_6 bug27720_5 has been reverted to its original state.
Exception is raised during translation BSpline curve having only one unique knot.
Protection for such case was added
Added protection against exception during reading BSpline curve with number of control points equal to 0
Added protection against exception due to using null binder during writing XDE document
Test case for issue #27575
OCAF attributes TDataStd_AsciiString, TDataStd_Integer, TDataStd_Name, TDataStd_Real are extended by possibility to use custom GUID.
Now multiple attributes of any of these types can be placed at the same label using different user-defined GUIDs.
For this new "Set" methods were added into each attribute, which takes this custom GUID as an argument.
Other aspects of management of attributes on labels remain the same.
Version number of persistent OCAF documents is incremented.
However, the attributes are stored in the same way unless non-standard GUID is used for particular attribute.
Previously saved documents are fully supported, but the new documents with this extension used will be non-readable by the previous version of OCAF libraries.
Problem of projection of line on the cone in the special case when starting point of the line coincides with the cone apex is fixed (by shifting this point along the source line).
1. BRepOffset_Inter3d::ConnexIntByInt
Create unique offset edge for each localized part shared between pair of faces of the input shape.
2. Test cases for the issue.
Extension on the 3D Offset algorithm (Mode="Complete", Join Type = "Intersection")
for colliding cases to add support for new configurations of the shapes.
In the previous approach the result of the offset operation was build from
the offset faces using MakerVolume algorithm, without checking of the validity of these faces.
The new extension is based on this approach, but now the offset faces are being checked
on invalidity and rebuild in case of any. This allows (in case of successful rebuilding) to avoid creation
of the unforeseen parts such as dangling parts, spikes, inverted faces in the result of offset operation.
The main criteria for the validity of the faces is the coincidence of the normal
direction of the offset face with the normal direction of the original face.
Check for removal of invalid faces has been removed as obsolete.
BRepOffset_Inter2D: Avoid excess trimming of the edges due to coincidence with other edges.
BRepOffset_Inter3D: Careful treatment of the intersection of the faces connected only through vertices.
Eliminating the compiler warning.
Small corrections of test cases for issue CR26917
When fuzzy option is in force prevent increasing tolerance of input shapes. Instead pass increased by fuzzy value the tolerances of sub-shapes everywhere where it is needed by intersection algorithms.
The following changes in API have been made:
- The methods SetFuzzyValue and FuzzyValue have been moved from the classes BOPAlgo_ArgumentAnalyzer, BOPAlgo_Builder, and BOPAlgo_PaveFiller to the base class BOPAlgo_Algo.
- The public method BOPDS_DS::VerticesOnIn has been renamed to SubShapesOnIn, and the new output parameter theCommonPB has been added.
- In BOPTools_AlgoTools, a new argument "theFuzzyValue" has been added in the methods ComputeVV and AreFacesSameDomain.
- In IntTools_Context, a new argument "theFuzzyValue" has been added in the methods ComputeVE and ComputeVF.
- The methods SetFuzzyValue and FuzzyValue have been added in the classes IntTools_EdgeEdge, IntTools_FaceFace.
- In the class IntTools_EdgeFace, the methods SetTolE, SetTolF, TolE, TolF have been removed, and the methods SetFuzzyValue, FuzzyValue have been added.
- The new argument "theTol" has been added in the method IntTools_WLineTool::DecompositionOfWLine.
Some improvements in algorithms have been made during fighting with regressions:
- Correct initialization of pave blocks for degenerated edges.
- In BOPAlgo_PaveFiller::MakeBlocks(), filter out paves on intersection curve that were put on the curve accidentally due to wide range of E-F intersection vertex.
- In the method IntTools_Tools::ComputeTolerance the margin added to the computed tolerance has been increased up to 0.001%.
- The method BOPAlgo_PaveFiller::PutPaveOnCurve has been corrected in order to use the original vertex tolerance instead of the value increased during putting it on other curves.
- The new method BOPDS_PaveBlock::RemoveExtPave has been added.
- The vertex tolerance computation in BOPTools_AlgoTools::CorrectCurveOnSurface has been improved, taking into account intersection segments between p-curves (to avoid regression on "bugs modalg_6 bug22794").
- Improve IsExistingPaveBlock to make more stable catching of coincidence of common block with section curve (against regression "bugs modalg_4 bug697_2" on Linux).
Test case for the bug has been added.
The following test cases have been updated as improvements:
boolean gdml_private ZH2 ZI7 ZJ7
boolean volumemaker C4
The test case bugs/modalg_4/pro19653 has been corrected to make it stable. See comment inside the script for details.
The test case bugs/modalg_6/bug25880 has been corrected to suppress wrong bfuse commands.
The test bugs/modalg_6/bug26954_3 has been corrected to compare the result with more precise reference value.
The "faulty" TODO in boolean/volumemaker/A8 has been made actual for Linux as well.
//Eliminate compilation error on Linux.
The shape after scaling contains PCurves with incorrect parametrization, because of too large tolerance given.
1. Set Precision::PConfution() as a tolerance for GeomLib::SameRange.
2. Do not take into account tolerances of vertices while calculating tolerance of transformed PCurve for edge.
3. Test case bugs/modalg_6/bug28028
Checking of number of knots is added. If number of knots more then allowed value, algorithm does not search distance between curves for each knot interval, but uses predefined sample point distribution.
This change was born in the scope of work on the issue 26329, but does not have direct connection to it. Therefore it has been postponed to be integrated later in its own context.
Test case for issue #28030
Purger has been disabled (in IntPatch_PrmPrmIntersection algorithm) if some points have been added in the Walking line (it is stupidly, first, to insert some points in the line and, after that, to delete points from this line).
Some improvements in IntWalk_PWalking::SeekPointOnBoundary(...) method have been made (see comments in the code for detail information).
Some test cases have been adjusted according to their new behavior.
The method BRepOffsetAPI_MakePipeShell::Generated now returns generated shapes for sub-edges and sub-vertices of sections.
The method BRepFill_PipeShell::BuildHistory is redesigned: now it builds generated shapes for sub-edges and sub-vertices of sections.
New Draw command "gensweep" is added to sweep commands for testing of history building.
Check for null shape has been added in the command addsweep implementation.
// eliminate warning
Test case for issue CR24932
Test case has been corrected.
- added implementation of mentioned methods for neutral point;
- sequence of detected objects was replaced by sequence of detected owner's indexes in AIS_InteractiveContext;
- commands vselnext and vselprev were corrected to update viewer properly;
- test case for issue #27530.
