"endl" manipulator for Message_Messenger is renamed to "Message_EndLine".
The following entities from std namespace are now used
with std:: explicitly specified (from Standard_Stream.hxx):
std::istream,std::ostream,std::ofstream,std::ifstream,std::fstream,
std::filebuf,std::streambuf,std::streampos,std::ios,std::cout,std::cerr,
std::cin,std::endl,std::ends,std::flush,std::setw,std::setprecision,
std::hex,std::dec.
Method Segment() of B-spline curve and surface has been extended by parameter theTolerance (theUTolerance and theVTolerance for surface), which defines the proximity between knots of a NURBS and boundaries of cutting segment. The default value of the tolerance is Precision::PConfusion().
Test cases have been added to check segmenting of B-spline surface and curves both 2D and 3D.
Approx_SweepApproximation::Perform() now creates empty arrays.
GeomAdaptor_SurfaceOfRevolution::UTrim() - fixed No_Exception misuse.
StdPrs_ShadedShape - fixed defining an invalid reference to Poly_Triangulation::UVNodes().
BSplCLib::MovePoint() and BSplCLib::MovePointAndTangent() now take optional
weights parameter as pointer consistent to other methods like BSplCLib::BuildEval().
Geom2d_BSplineCurve::LocateU(),Geom_BSplineCurve::LocateU, Law_BSpline::LocateU()
Geom_BSplineSurface::LocateU() and Geom_BSplineSurface::LocateV()
have been corrected with missing range checks.
BSplCLib::Hunt() documentation has been corrected to reflect its actual implementation.
Added macro Standard_NODISCARD equivalent to C++17 attribute [[nodiscard]] for compilers that support this.
Using Standard_NODISCARD macro for methods that create new object in gp, math, Geom, Bnd packages.
Marked equivalent operators with Standard_NODISCARD, if they are defined close to relevant methods.
Corrected code where warnings on unused result of calls to methods creating new objects are generated.
In most cases it looks like spelling errors (e.g. Normalised() instead of Normalise())
The algorithm has been improved for the cases when the intersection line goes through the cone apex.
<!break>
1. All special points are put to the ALine forcefully (if they are true intersection point). Currently this step has not been implemented yet.
2. Now the tolerance of IntPatch_Point (put into ALine) is computed in order to cover the distance between it and the correspond ALine.
3. Test cases have been created.
4. Procedure of trimming IntAna_Curve has been improved.
5. Criterion when the discriminant of IntAna_Curve can be considered to be equal to 0 has been improved.
6. Methods IntAna_Curve::FindParameter(...) (and IntPatch_ALine::FindParameter(...)) currently returns list of all parameters corresponding the given point (IntAna_Curve can be self-interfered curve). Before the fix, this method always returned only one (randomly chosen) parameter.
7. Interfaces of the following methods have been changed: IntAna_Curve::FindParameter(...), IntPatch_ALine::FindParameter(...), IntPatch_ALine::ChangeVertex(...), IntPatch_SpecialPoints::AddPointOnUorVIso(...), IntPatch_SpecialPoints::AddSingularPole(...), IntPatch_WLineTool::ExtendTwoWLines().
8. Following methods have been added: IntAna_Quadric::SpecialPoints(...), IntPatch_ALineToWLine::GetSectionRadius(...), IntPatch_SpecialPoints::ProcessSphere(...), IntPatch_SpecialPoints::ProcessCone(...), IntPatch_SpecialPoints::GetTangentToIntLineForCone(...).
------------------
1) tests/boolean/volumemaker/C5
tests/boolean/volumemaker/C6
tests/boolean/volumemaker/E7
They are real IMPROVEMENTS. In the FIX (in compare with MASTER), section result between pairs of faces f2&f6 (C5), f3&f7 (C6) and f1&f5 (E7) is closed. Separated test cases have been created in order to focus on the problem with section. Bug #28503 has been fixed.
Correction in test cases.
Use of Cotire tool is introduced for acceleration of CMake builds, by usage of precompiled headers.
CMake option BUILD_USE_PCH is added to enable / disable use of precompiled headers
When precompiled headers are used, additional compiler macros are defined globally in the build system to avoid problems due to different order of included files:
- NOMINMAX is defined on Windows to prevent defining "min" and "max" as macros by windows.h
- STRSAFE_NO_DEPRECATE and _SCL_SECURE_NO_WARNINGS are defined on Windows to prevent declaring functions of standard C library as deprecated by #pragma, and other warnings in system headers
- GL_GLEXT_LEGACY and GLX_GLEXT_LEGACY are defined to ensure that only OCCT's own glext.h is used
- __STDC_FORMAT_MACROS is defined to have standard C print format macros always defined
Code is corrected to avoid conflicts with system headers and in case of compiling together as unity builds (partially):
- Some locally defined variables in TKV3d, TKHLR are renamed to be unique
- Duplicated definitions of macros and global functions are eliminated in TKSTEP
- Useless header WNT_UInt.hxx is removed
- Usage of local variables conflicting with X11 macro is avoided in Draw_Viewer.cxx
- Local variables in AIS_ConcentricRelation.cxx are renamed to avoid conflict with macros defined in windows.h
- HXX files containing code are renamed to PXX or merged with corresponding CXX files.
IVtkTools classes are corrected to avoid compiler warnings disabled in non-PCH builds by inclusion of VTK headers.
Useless pragmas disabling warnings on MSVC are removed
The main reason of the regression is that the Extrema algorithm finds the truth extrema point but cannot adjust it to the range of given circle. It is connected with the fact that Geom(2d)Adaptor_Curve::IsPeriodic() method returns false for given circle because adaptor contains a piece of the circle which is not closed.
New algorithm of IsPeriodic() method will return the information about periodicity of the curve itself (independently of first and last parameter of adaptor).
The documentation about Geom(2d)_TrimmedCurve and Geom_RectangularTrimmedSurface has been updated in frame of the information about IsPeriodic-methods.
Macro NO_CXX_EXCEPTION was removed from code.
Method Raise() was replaced by explicit throw statement.
Method Standard_Failure::Caught() was replaced by normal C++mechanism of exception transfer.
Method Standard_Failure::Caught() is deprecated now.
Eliminated empty constructors.
Updated samples.
Eliminate empty method ChangeValue from NCollection_Map class.
Removed not operable methods from NCollection classes.
Provide proper initialization of the field Geom_OffsetSurface::myOscSurf in the case of creating offset of the trimmed bspline surface.
Adjusting test cases according to their new behavior.
PrsMgr_PresentableObject, Graphic3d_Structure now consistently
take and store Handle(Geom_Transformation) instead of
TColStd_Array2OfReal / Graphic3d_Mat4.
Low-level advanced methods have been modified to pass Handle(Geom_Transformation).
High-level methods have been preserved accepting old syntax taking gp_Trsf.
Geom_Transformation now inlines most methods.
1) BRepMesh_FastDiscretFace.cxx:
- exclude planes from procedure of inserting internal points.
- localize declaration of the container aNewVertices in each method where it is needed.
- correct the logic of the method insertInternalVerticesOther, so that to separate the processes of removing extra points and addition of new points in different cycles, thus making the code more clear and in addition stable.
- insert useful output of intermediate mesh to a file in control() method for debug purposes (with definition DEBUG_MESH).
2) Add global functions MeshTest_DrawTriangles and MeshTest_DrawLinks to draw mesh data in debug session.
3) BRepMesh_FastDiscret:
- in the method Add calculations of deflections have been simplified for non-relative mode.
- replace the attribute MinDist with Deflection in EdgeAttributes structure. Correct its computation so that later to store this value as deflection of the polygon.
4) Make protection against exception in the method BRepMesh_Delaun::addTriangle() when an added triangle creates a third connection of a mesh edge.
5) BRepMesh_EdgeTessellator.cxx, BRepMesh_EdgeTessellationExtractor.cxx: use Geom2dAdaptor_Curve in order to use b-spline cache while computing value on a curve.
6) In BndLib_Box2dCurve::PerformBSpline, avoid creating new b-spline in case of requested parameter range differ from natural bounds insignificantly.
7) In GeomAdaptor classes, postpone building of cache till the time of its actual usage. So, creation of an adapter to compute intervals of continuity does not lead to creation of internal cache.
8) In the methods BRepAdaptor_Curve::Bezier and BSpline do not call Transformed() if transformation is identity.
9) In the classes Geom_BSplineCurve, Geom_BSplineSurface, Geom_BezierCurve, Geom_BezierSurface, Geom2d_BSplineCurve, Geom2d_BezierCurve change the method Pole() to return the point by const reference.
10) In CPnts_AbscissaPoint.cxx, compute derivative by D1 instead of DN to make use of b-spline cache.
11) Change test cases to actual state:
- Number of triangles/nodes can grow due to more accurate work with deflection of edges. Now the edge is tessellated using its own tolerance instead of maximal tolerance of all shapes in the face.
- Accept new numbers of mesh errors (free links, free nodes) for really bad shapes.
- Correct the test "bugs/mesh/bug25612" to produce stable result.
- Disable redundant checks in test cases bug25378* (lower limit for computation time).
- Speed up iso-lines computation for offset of bspline surfaces. For that use adaptor instead of original surface in evaluator of approximation.
- Add output of polylines for debug of insertInternalVerticesOther().
Reference data in test case bugs\moddata_2\bug453_3 have been changed to be close to expected theoretical values. This makes the test give stable result on different platforms.
Method DownCast() is made template, to be available only when argument is actually a pointer or handle to a base class.
For compatibility with existing code, method DownCast() that can be used for the same type, derived, or unrelated class (i.e. where there is no actual down casting) is still available, its use shall cause "deprecated" compiler warning.
OCCT code is updated to remove meaningless DownCast()s; a few places where DownCast() was used with argument of unrelated type are corrected.
DRAW command QAHandleCast is removed (it was useful only during redesign of handles).
Writing periodic BSpline surfaces to IGES:
Replace segmentation of surface to setting new origin.
Fix face bounds if its length (in U or V) is more than period.
Segmentation of BSpline curve/surface:
Throw exception if segment length more than period.
Fix test case bugs moddata_1 bug14782:
bounds of segmentation must be the same as curve bounds, according to issue description.
Changes in classes Geom2d_BSplineCurve, Geom_BSplineCurve, Geom_BSplineSurface:
- Replace *Raise_if macros with unconditional exceptions where it does not affect on performance.
- Update comments in .hxx files in regard of raised exceptions.
Restored possibility to have out-of-line implementation of DynamicCast() and STANDART_TYPE():
- Macro STANDARD_TYPE() now resolves to function get_type_descriptor() of the class
- Macro DEFINE_STANDARD_RTTI is replaced by two variants:
- DEFINE_STANDARD_RTTI_INLINE works as before, defining DynamicCast() and get_type_descriptor() as inline functions
- DEFINE_STANDARD_RTTIEXT declares DynamicCast() and get_type_descriptor() as exported
- Macro IMPLEMENT_STANDARD_RTTIEXT provides definition of DynamicCast() and get_type_descriptor() for a class
Upgrade script amended to replace DEFINE_STANDARD_RTTI by pair of DEFINE_STANDARD_RTTIEXT / IMPLEMENT_STANDARD_RTTIEXT if source file with the same name as header is found in the same folder, and by DEFINE_STANDARD_RTTI_INLINE if either source is not found or class is defined in the source (i.e. not in header)
Upgrade tool improved to recognize include statements with path prefix, like #include <occt/gp_Pnt.hxx>
Code corrected to eliminate warnings reported by upgrade tool.
Template of CXX file for testing upgrade tool added.
Documentation of upgrade procedure updated.
1. Implemented evaluators for 2D and 3D offset curves
2. Removed obsolete namespace CSLib_Offset
Update of UDLIST (adding no-cdl-pack Geom2dEvaluator)
Update TKG2d/CMakeLists.txt after rebase
Correction compilation in debug mode
1. Remove cache from Geom_BezierCurve, Geom2d_BezierCurve and Geom_BezierSurface
2. Add cache for Bezier curves into GeomAdaptor_Curve, Geom2dAdaptor_Curve and GeomAdaptor_Surface
3. Update comments in corresponding cache classes
4. Avoid frequent down-casting to B-splines in adaptors
* Implement GeomEvaluator package
* Inject evaluators to GeomAdaptor_Surface to calculate values of complex surfaces
* Inject evaluators to Geom_Surface classes to calculate values for offset surfaces, surfaces of revolution and surfaces of extrusion
* Move Adaptor3d_SurfaceOfLinearExtrusion and Adaptor3d_SurfaceOfRevolution to GeomAdaptor and unify calculation of their values and derivatives
* Code optimizations
* Update test cases
Update of test-cases according to the new behavior
Clean-up in code causing warnings when OCCT_DEBUG is enabled
Minor corrections:
- new compiler warnings on VC++ 14
- rename of "PPC" variables that are said to caused conflicts on PowerPC
- removal of unused header TopOpeBRep/TopOpeBRep_tools.hxx
Poles bounding box for curve added for bezier and bspline curves.
Method Poles() for Bezier curve added.
Test case for issue CR26560
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
Test cases are updated to the new behavior.
Removed check for C0 surface while copying offset surface
General code melioration
Test case for issue CR26522
Ignoring C0 basis surface while reading offset surface (added)
Performance improvements and regression elimination.
Handling of degenerated case added.
Update of test-case offset faces_type_a A2 according to the new behavior
Test-case for issue #26418
Adaptations for compiling with GCC 4.7 and 4.8:
- Construction semantics is used for Handle objects being initialized by const Handle objects of derived type, to avoid overload resolution error in GCC 4.7.
- Missing includes added.
- Fixed bugs related to misuse of direct casts of handle.
- Eliminate CLang warnings on uninitialized and unused variables, functions, and expressions
Automatic upgrade of OCCT code by command "occt_upgrade . -nocdl":
- WOK-generated header files from inc and sources from drv are moved to src
- CDL files removed
- All packages are converted to nocdlpack
Automatic update by command "occt_upgrade . -downcast"
C-style cast of Handle to that of derived type (now illegal) is replaced by call to DownCast()
Const reference local variables of Handle type initialized by result of DownCast are replaced by normal variables.
Missing headers added; includes of headers "Handle_...hxx" removed.
Misuses of macro Handle() and its use in typedefs corrected.
Alias classes Profile and Option are removed from IFSelect; ones defined in MoniTool are used directly.
Removed header files defining only Handle classes (except Image_PixMap_Handle.hxx)
Classes SelectMgr_BaseFrustum and now inherit Standard_Transient and can be manipulated by Handle (not NCollection_Handle)
Fixed reference-type local variable pointing to temporary object
Use of handle in conditional expressions and comparisons to NULL are replaced by call to method IsNull()
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
1. Eliminated exception after conversion non-rational B-spline to rational
2. Implemented DRAW command setweight to change weights of B-spline
3. Test cases were added
Implemented additional flag into Geom_TrimmedCurve to adjust or not the periodic curve inside the first period.
API of Geom2d_TrimmedCurve is changed according to Geom_TrimmedCurve.
Test-case for issue #24411
Sometimes curve or surface, which is defined as C0, has continuity G1 or above. Offset can be built from these shapes.
Therefore, this extended checking was added into SetBasisCurve and SetBasisSurface methods.
Main changes in function BRepOffset_Tool::ExtentFace(...):
* "return" is added if intersection (in 2D-space) between two edges in a face cannot be found.
Basis curve/surface continuity value found (if G1-checking is OK) is set up as BasisContinuity (see myBasisCurveContinuity and myBasisSurfContinuity members which is returned by GetBasisCurveContinuity and GetBasisSurfContinuity() methods). This fact is used in Geom2dAdaptor and in GeomAdaptor classes.
Possibility is entered, which allows for basis elements of offset curve/surface to avoid of C0-checking.
Test cases were changed according to their new behavior.
Test-cases for issue #25124
Macros ending on "DEB" are replaced by OCCT_DEBUG across OCCT code; new macros described in documentation.
Macros starting with DEB are changed to start with "OCCT_DEBUG_".
Some code cleaned.
Existing method of Cylinder-Cylinder intersection computing is based on finding the analytic line (as a function of one argument) and converting one into the walking-line with set of equidistant (along the line parameter) points.
The main advantage of applied method is using adaptively computed step. Necessary step is computed into every point of the obtained walking-line. At that we receive final walking-line directly (without preliminary analytic line) and we determine moments more precisely, when it should be split (see IntPatch_ImpImpIntersection_4.gxx).
The main disadvantages is bad working this method for non-trimmed cylinders (with infinite bounds), because step value is depend on the boundaries values.
More over, new method always returns walking-line, while intersection result can be an analytic curve (lines, circle, ellipse). That is NO good. Therefore, analytic curve is computed by existing method.
In conclusion, in spite of covering almost all more often meeting cases, new method has limited application. Then we should use the existing old method.
Additionally, method MinMax() is added (see Standard_Real.hxx file). It uses into new algorithm.
Some test cases is changed according to their new behavior.
Test case for issue CR24915 is added.
Into GeometryTest_APICommands.cxx only tabulations were chaged.
"Extending" of isolines (see Geom2dHatch_Hatcher.cxx).
Small correction of test case for issue CR24915.
Redundant keyword 'mutable' removed in CDL files.
In IGESConvGeom_GeomBuilder, unused methods MakeXY() and MakeXYZ() removed.
Method StepAP214_AutoDesignGroupAssignment::Init() replicating same method of the base class is removed as it causes CDL extraction error after above (seemingly irrelevant) changes.
