Test for 0028167: Fillet has strange form at its end
Test for 0028168: Exception is raised during Boolean operation
Test for 0028194: BRepMesh - Standard_OutOfRange exception on valid shape
Test for 0028200: Invalid topology of the general fuse result
Test for 0028216: Intersection of a face and a solid is broken up leading to empty result of Boolean common operation
Test for 0028245: Result of Cells Builder algorithm becomes invalid after removal of internal boundaries on faces
Test for 0028247: Effect of minSize parameter of BRepMesh_IncrementalMesh seems to be too strong
Test for 0028274: BOPAlgo_MakerVolume fails to create solid
Test for 0028279: Greater oscillations and higher degree of resulting B-Spline in cylinder-cylinder intersections in 7.1.0
Test for 0028354: Filleting destroys shape if the filleted edge touches a seam edge
Test for 0028366: BOP Common fails with solid and planar face
Test for 0028379: BRepMesh produces mangled mesh for a cone
Test for 0028388: Boolean common of simple face and solid results in empty compound
Test for 0028393: Boolean cut produce wrong result.
Test for 0028402: Modeling - calculation of properties of complex compounds is slow
Test for 0028406: High tolerances after boolean operation on OCCT 6.9.1
Test for 0028694: IGES reader produces too small edge covered by its vertices
Test for 0028719: Mesh - Display issue for special model
Test for 0028108: Sweep fails in "Right Corner" mode
Test for 0028696: Offset 2D algorithm produces micro edges
Test for 0028700: BRepBuilderAPI_Sewing produces too small edge covered by its vertices
Test for 0028722: Conversion of a spherical face to a spline produces an invalid shape
Test for 0028739: Draft on face fails
Test for 0028662: Data Exchange - Exception during reading large STEP file.
Test for 0028768: ShapeFix slighly corrupts the source face
Test for 0028485: Fuse of two shapes using gluing and non-destructive options gives invalid result
Test for 0028500: Artifact in shaded view of the shape
Test for 0028523: Fixshape reverses the orientation of the face
Test for 0028544: Big tolerance value is returned by Implicit-parametric algorithm
Test for 0028571: BRepOffsetAPI_MakeOffset build invalid wire
Test for 0028572: Wrong result of the mkface command
Test for 0028595: Shifting 2d curves for non-periodic surfaces leads to incorrect result.
Test for 0028596: Erroneous fillet
Test for 0028640: BRepBuilderAPI_Transform build invalid shape
Test for 0028656: 3d offset modifies the input shape
Test for 0000077: BUC60866. The BRepFill_Pipe fails.
Test for 0000078: BUC60875. Pipe is created incorrectly on two wires.
Test for 0000082: BUC60908. Incomplete section of shell by plane.
Test for 0000083: BUC60912. Section of simple BSpline surfaces is performed too slow.
Test for 0000862: GeomAPI_ExtremaCurveCurve fails on given curves
Test for 0002442: Error in BRepClass3d_SolidClassifier
Test for 0003936: Face on a surface of extrusion is extended after import to IGES
Test for 0005081: BRepOffset_MakeOffsetShape algorithm does not return valid result.
Test for 0005145: Wrong result of projection of a circle on a sphere.
Test for 0014846: ShapeFix_Wireframe::FixWireGaps() works wrong on a shape with seam edge
Test for 0016424: Exception in reading of attached IGES file
Test for 0010377: Incorrect fuse result when objects tangent by planar face
Test for 0013565: Incorrect result of Common operation
Test for 0013566: Incorrect result of Extrema between a large circle and a line
Test for 0024632: Artifacts during Boolean cut operation on neighboring parts
Test for 0005582: Impossible to make offset on the shape with degenerated edge
1. The reason of exception has been eliminated.
2. Algorithm in IntPatch_WLineTool::JoinWLines(...) method has been modified in order to forbid join curves in the point where more than two intersection lines meet. More over, joining is forbidden if local curvature in the connection point is too big (see function CheckArgumentsToJoin(...) in the file IntPatch_WLineTool.cxx).
3. Interface of IntPatch_WLineTool::JoinWLines(...) method has been modified in order to reduce number of arguments.
4. Small corrections in IsSeamOrBound(...) static function has been made. Namely, check has been added if two boundaries are in the same period region but are too far each to other (see IntPatch_WLineTool.cxx, IsSeamOrBound(...) function, line # 532).
5. "Reversed" flag has been made local. Now, it is pure local characteristic: the algorithm decides itself, shall we reverse the argument order. This correction makes the algorithm more commutative (see issue #25404). However, IntPatch_WLineTool::JoinWLines(...) method can return non-commutative result.
6. Algorithm of searching small intersection curves has been improved.
7. New methods have been added in Bnd_Range class.
Some test cases have been adjusted according to their new behavior.
1. tests\bugs\modalg_6\bug26310_3
tests\bugs\modalg_6\bug26310_4
tests\bugs\moddata_2\bug235
tests\perf\modalg\bug26310_1
tests\bugs\modalg_5\bug24915
Logic of these cases has been changed. Mover over, additional check has been added in "bug26310_1" test case. Therefore, its performance will be slower than on the current MASTER.
2. tests\bugs\modalg_5\bug25292*
Scripts have been rewritten in order to make it more readable. Logic of these cases has not been changed.
1. The packages *QANewModTopOpe*, *QANewBRepNaming* and *QANewDBRepNaming* have been removed as containing obsolete features.
The corresponding QA commands (such as OCC252, OCC307 and OCC294) and test cases have also been removed.
2. The QA command buc60609 has been removed. The corresponding test case bugs/moddata_1/buc60609 has been rewritten using b2dclassify command.
1. Using appropriate intersection tolerance for splitting the degenerated edges in Boolean operations (void BOPAlgo_PaveFiller::FillPaves()).
2. Avoid creation of the wires consisting of degenerated edges only (BOPAlgo_WireSplitter).
3. Test case bugs/moddata_2/bug469 has been corrected to obtain valid result of operation. TODO statements have been removed from the case.
1. The algorithm BOPAlgo_ShellSplitter has been improved for the cases with multi-connected edges
to produce as many shells as possible from the given input faces.
2. Building tool prism in BRepFeat_MakePrism has been changed in order to avoid self-intersections
in the cases when the limiting faces are intersecting.
3. Test cases for the issue.
4. Test cases boolean/bcut_complex/N9 and boolean/gdml_private/ZH3 are improvements.
5. Test cases boolean/volumemaker/C5 and boolean/volumemaker/C6 has been marked as BAD due to found problem in intersection algorithm.
The results in these cases obtained on the branch are better than on master, but still not complete.
Adjusting test case bugs/moddata_2/bug469 for its current behavior.
1) In Views menu the check button item "Extended view commands" has been added. Pressing on it shows/hides the set of buttons in the main window that allow manipulating of view zoom/pan/rotate by mouse.
2) New category of commands "Vector and measurement Commands" has been added. The commands in this category allow simple calculations using 2D and 3D vectors, such as cross and dot products, computation of distances of points to other objects, and other functions.
3) The new command "pickf" has been added in "DRAW Variables management" category. It allows extracting a picked with mouse face included in some shape as a new variable.
4) New commands "del" and "era" have been added in "DRAW Variables management" category. They allow deleting (destructing) or erasing (from view) variables matched by glob pattern.
5) Missing help for some commands like "don", "disp" and others has been added.
1. Earlier we could not put any IntPatch_Point to the intersection curve. The fix makes the algorithm of IntPatch_Points searching more precise. It is achieved by redetermination of earlier found vertices with help of minimization the distance between boundary of one intersection argument and another intersection argument (surface).
2. Additional check has been added, if IntPatch_Point adjusted to the domain boundary is true intersection point.
3. Method Contap_ArcFunction::Surface() has been added.
4. Method LastComputedPoint() has been added for IntPatch_ArcFunction and Contap_ArcFunction classes.
5. Correction in FindMaxDistance() method (see IntTools_FaceFace.cxx file) according to pure Golden-ratio minimization algorithm. Earlier this function worked wrong with small searching intervals.
6. Insignificant correction in math_BrentMinimum.cxx file (elimination of "defines").
Creation of test case for issues #27221 an #27252.
Adjusting some test cases according to their new behavior.
Correction according to the last remarks.
Small correction of shape names for issue CR27252
Test case for issue 28210
Small correction of test case for issue 28210
Draw command 'proj' has been improved:
- Add possibility to pass the starting point. If it is passed than the algorithm Extrema_GenLocateExtPS is used instead of standard projection.
- Make the output of the command more clear.
Test case bugs/moddata_3/bug28196 has been added.
The root of the problem is incorrect processing of cases when intersection line goes through the apex(es) of sphere. The fix improves this situation. The algorithm is taken from DecomposeResult(...) function (see IntPatch_ImpPrmIntersection.cxx file). Before the fix, faltering steps were done to solve this problem. As result, it worked in some particular cases. Now, its possibilities have been extended significantly.
Following changes have been made in the fix:
1. Class IntPatch_ALineToWLine has been rewritten cardinally. It touches as interfaces of existing methods as adding/removing some methods/fields. Correction touches both cases: going through seam of Cone/Sphere and through pole(s) of sphere. Old interface did not allow making some actions with analytical line (ALine), e.g. splitting it on several Walking-lines (WLine).
2. Restriction-line support has been removed from Implicit-Implicit intersection result (see IntPatch_Intersection::GeomGeomPerfom(...) method). It connects with the fact that the intersection algorithm itself returns precise intersection line in analytical cases (in compare with parametric intersector). Therefore, we do not need in additional (restriction) line.
3. New class IntPatch_SpecialPoints has been added. This class contains methods to add some special points (such as apex of cone, pole of sphere, point on surface boundary etc.) in intersection line (IntPatch_PointLine). It is based on the static functions, which already exist in IntPatch_ImpPrmIntersection.cxx file (these functions have been moved to the new class).
4. Method IntPatch_WLineTool::ExtendTwoWlinesToEachOther(...) has been renamed to IntPatch_WLineTool::ExtendTwoWLines(...). It is connected with changing main idea of the method. Now it allows extending WLine to the surface boundary or to the singular point (if it is possible): cone apex, sphere pole etc. Interface of this method has been corrected, too. At that, old functionality (extending to each other) has been kept. For implementation of this algorithm, new enumeration "IntPatchWT_WLsConnectionType" has been created.
5. Method IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) has been added. See IntPatch_PointLine.hxx for detail information. It allows correct step computing depended on the local curvature of the intersection line. This method uses geometrical properties of intersected surfaces to compute local curvature. Therefore, it can be applied in wide range of cases even if the intersection curve is not represented in explicit form (e.g. in case of param-param-intersection).
6. Method IntSurf::SetPeriod(...) has been created.
7. Additional check has been added in Draft_Modification::Perform() method for better choice of correct fragment of intersection line for processing DRAFT operation.
8. New overload method IntPatch_Point::SetValue() has been added.
9. Some refactoring of the code has been made.
Creation of test case for issue #27431.
---------------------------------------------------------------------------------------------
Some test cases have been adjusted according to their new behavior.
tests\bugs\modalg_4\bug62
It is really IMPROVEMENT (but fortuitous).
tests\bugs\modalg_5\bug25838
The behavior of this test has been reverted to the state before fixing the issue #27341. Main problem has not been fixed in #27341. It was fortuitous improvement.
tests\bugs\moddata_2\bug565
Quality of intersection curve was not checked. And the curve is bad on both MASTER and FIX. Input data are really wrong: plane-like-cone. However, on the MASTER, four intersection curves (the quality is insignificant) are expected. On the fix, not empty intersection result is expected simply.
tests\boolean\volumemaker\A8
Differences in images and CPU is expected. Difference in images is expected to be fixed in the issue #26020. Now, we should apply this behavior.
Much CPU time is spent by IntTools_FaceFace::ComputeTolReached3d(...) and GeomInt_IntSS::BuildPCurves(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\boolean\volumemaker\F8
tests\boolean\volumemaker\F9
tests\boolean\volumemaker\G5
tests\boolean\volumemaker\G6
CPU difference is expected. Much CPU time is spent by IntPatch_PointLine::CurvatureRadiusOfIntersLine(...) method calling. This method is really new (it does not exist on the MASTER) and is really useful. Therefore, we should apply new behavior.
tests\boolean\volumemaker\G1
CPU difference is expected. Much CPU time is spent by IntTools_WLineTool::DecompositionOfWLine(...) and IntTools_FaceFace::ComputeTolReached3d(...) methods calling. These methods are not touched by the algorithm. It is the result of change of intersection curve(s) form. However, the new Curve(s) seems to be valid and can be applied. As result, new behavior can be applied, too.
tests\bugs\modalg_6\bug26619
Differences in images is expected. The test keeps its BAD status on the FIX. But the result on the fix is nearer to expected than on the MASTER. Issue #27014 is still actual. As before, it is not clear, why the number of entities is different. The number of section curves has not been changed. Interfered entities are the same as on the MASTER.
tests\bugs\modalg_5\bug25319_1(2)
The reason is described in the issue #27896.
Small correction in the test case
The reason of exception has been eliminated.
Creation of the test case for this issue.
Correction of unstable test case.
Some test cases have been adjusted according to their new behavior.
- Ensure that the subshapes from the original shape will not be changed after nurbsconvert operation.
For that create the new vertexes (NewPoint(..)) as well as new curves (NewCurve(..)) and new surfaces (NewSurface(..)) before calling of Rebuild() method. Make copies of all vertexes impacted by curve or surface modifications. This eliminates necessity of creation of new vertices during recursive rebuilding of the entire shape.
- Compatibility with the old behavior of BRepTools_Modifier has been retained as an option. For that the new flag MutableInput has been added in the interface of the class.
- This patch also impacts other operations based on BRepTools_Modifier, in the sense that they also become safe regarding input shapes.
- Create new test cases. Some test cases with nurbsconvert command are changed to lock input shapes from modifications.
fix regressions
OpenGl_Caps - flag ffpEnable is now initialized to false on desktop OpenGL.
OpenGl_Context::init() - now prints error if OpenGL version does not support GLSL
and switches OpenGl_Caps::ffpEnable to true.
update test cases
1) BRepMesh_FastDiscretFace.cxx:
- exclude planes from procedure of inserting internal points.
- localize declaration of the container aNewVertices in each method where it is needed.
- correct the logic of the method insertInternalVerticesOther, so that to separate the processes of removing extra points and addition of new points in different cycles, thus making the code more clear and in addition stable.
- insert useful output of intermediate mesh to a file in control() method for debug purposes (with definition DEBUG_MESH).
2) Add global functions MeshTest_DrawTriangles and MeshTest_DrawLinks to draw mesh data in debug session.
3) BRepMesh_FastDiscret:
- in the method Add calculations of deflections have been simplified for non-relative mode.
- replace the attribute MinDist with Deflection in EdgeAttributes structure. Correct its computation so that later to store this value as deflection of the polygon.
4) Make protection against exception in the method BRepMesh_Delaun::addTriangle() when an added triangle creates a third connection of a mesh edge.
5) BRepMesh_EdgeTessellator.cxx, BRepMesh_EdgeTessellationExtractor.cxx: use Geom2dAdaptor_Curve in order to use b-spline cache while computing value on a curve.
6) In BndLib_Box2dCurve::PerformBSpline, avoid creating new b-spline in case of requested parameter range differ from natural bounds insignificantly.
7) In GeomAdaptor classes, postpone building of cache till the time of its actual usage. So, creation of an adapter to compute intervals of continuity does not lead to creation of internal cache.
8) In the methods BRepAdaptor_Curve::Bezier and BSpline do not call Transformed() if transformation is identity.
9) In the classes Geom_BSplineCurve, Geom_BSplineSurface, Geom_BezierCurve, Geom_BezierSurface, Geom2d_BSplineCurve, Geom2d_BezierCurve change the method Pole() to return the point by const reference.
10) In CPnts_AbscissaPoint.cxx, compute derivative by D1 instead of DN to make use of b-spline cache.
11) Change test cases to actual state:
- Number of triangles/nodes can grow due to more accurate work with deflection of edges. Now the edge is tessellated using its own tolerance instead of maximal tolerance of all shapes in the face.
- Accept new numbers of mesh errors (free links, free nodes) for really bad shapes.
- Correct the test "bugs/mesh/bug25612" to produce stable result.
- Disable redundant checks in test cases bug25378* (lower limit for computation time).
- Speed up iso-lines computation for offset of bspline surfaces. For that use adaptor instead of original surface in evaluator of approximation.
- Add output of polylines for debug of insertInternalVerticesOther().
Reference data in test case bugs\moddata_2\bug453_3 have been changed to be close to expected theoretical values. This makes the test give stable result on different platforms.
Modification of algorithm in order to prevent violation of angular and curvature deflection condition for smooth intervals of curve.
Modification of algorithm for calculation of maximal deflection in command crvtpoints, crvpoints (CR25649)
Elementary bug fixing in algorithm GCPnts_UniformDeflection.gxx
Modification of test cases in order to set new reference parameters of shape triangulations
Some tests:
bugs modalg_2 bug397
mesh standard_incmesh C7, V3
mesh standard_incmesh_parallel C7, V3
mesh standard_mesh C7, V3
mesh standard_shading V3
were modified by TODO with reference bug 27226, because some problems in meshing algorithm (package BRepMesh) were discovered when tessellation of edges was changed. These problems cannot be solved by modification of GCPnts_TangentialDeflection algorithm. New issue #27226 was created, see bugtracker for details.
Correction of test data
Test case for issue #27108
Modification of algorithm for improving performance
Correction of test cases
Check deviation of normals at vertices of triangles for complex surface types different from Bezier and BSpline.
Modified test cased according to changes in BRepMesh.
Do not remove more intermediate parameters than N - 3 in order to have at least one parameter related to surface internals.
Check angle for angular deflection before removement of intermediate parameters.
Unify computation of internal vertices for complex surfaces.
Discretization points of edges are taken into account during computation of step of mesh grid.
Remove parameters only if they fit the constrains along the whole surface.
Do not add random internal parameters in case if their number is just 2.
Force freezing parameters both for U and V in case of significant control point.
Modified test cases
Warnings elimination in vc14.
Command checkplatform was created.
All test cases were updated.
Global variable os_type was eliminated.
New option -osx (MacOS) for procedure checkplatform was added.
Topological tolerances changed to geometric tolerances.
Protection from the usage of invalid result is added to restore good projection.
Test cases are updated.
Test case added.
Correction of test case for issue CR27133
- Added function checkprops, set default tolerance parameter to 1.0e-4
- Using "area" instead of "square".
- Options "-equal\notequal" isn't used together with "-s" in blend and offset test cases.
- Correct regressions/differences/improvements and CPU problem (set props tolerance to 0.1)
- Corrected test cases to use checkprops proc.
- Correct image difference
- Updated TODOs in test cases.
- Updated test cases to get correct images of result shape
Added possibility to define patterns that must be present in the test log, so that test is considered OK only if all these patterns are found.
New REQUIRED statement is introduced for that, documented in dox/dev_guides/tests/tests.md.
Removed all uses of decho and dlog commands, added REQUIRED where necessary.
Command xdistcs is modified to output to Tcl instead of cout, and extended to report errors and warnings if distances are greater than tolerance (directly, instead of complex post-processing on Tcl level).
DEBUG mode for TODOs was removed (we should have no deviations in Debug mode).
Corrected indentation in DrawResources/TestCommands.tcl
HTML log will now highlight TODO statement causing IMPROVEMENT status, or REQUIRED statement causing FAIL, by corresponding color.
Poles bounding box for curve added for bezier and bspline curves.
Method Poles() for Bezier curve added.
Test case for issue CR26560
Function to compute subshape max tolerance has been added.
Fixed bounding box expanding at Face/Face step of boolean operation.
Test cases are updated to the new behavior.
Class CellFilterNDim added.
Class CellFulterNDim used in GlobOptMin to improve performance in case of many solutions.
Memory leak eliminated.
Test cases for issue CR26184
Small correction of test cases for issue CR26184
Upgrade method of computing vertex tolerance.
Update function, which used the old method.
Test case for issue CR26241
Delete obsolete variables.
Small correction of test cases for issue CR26241
Replace BOPCol_MapOfShape by BOPCol_IndexedMapOfShape to provide
the same order of shells in the result
Test case for issue CR26253
Correction of test case for issue CR26253
1. B-spline cache was moved into separated classes: BSplCLib_Cache for 2D and 3D curves and BSplSLib_Cache for surfaces.
2. The cache is used now in corresponding adaptor classes (Geom2dAdaptor_Curve, GeomAdaptor_Curve and GeomAdaptor_Surface) when the curve or surface is a B-spline.
3. Algorithms were changed to use adaptors for B-spline calculations instead of curves or surfaces.
4. Precised calculation of derivatives of surface of revolution is implemented for the points of surface placed on the axis of revolution (Geom_SurfaceOfRevolution.cxx)
5. Small modifications are made to adjust algorithms to new behavior of B-spline calculation.
6. Test cases were modified according to the modern behavior.
7. Changes in BOPAlgo_WireSplitter, BOPTools_AlgoTools, BRepLib_CheckCurveOnSurface and ShapeAnalysis_Wire to use adaptors instead of geometric entities
8. Allow Geom2dAdaptor and GeomAdaptor in case of offset curve to use corresponding adaptor for basis curve
Modification of test-cases according to the new behavior.
Precision used to consider B-Spline knots identical is restricted to be not less than Precision::PConfusion() in Geom2d_BSplineCurve::Segment().
Affected tests updated (improvements)
Test case for issue CR25971
Test for sewing command were updated to check reference information.
Commands for testing were moved to the file src/DrawResources/CheckCommands.tcl
Documentation overview was updated.
Add one more pre-defined Z-layer Graphic3d_ZLayerId_BotOSD.
Define new Transformation Persistence flags Graphic3d_TMF_2d and Graphic3d_TMF_2d_IsTopDown
for displaying objects in screen coordinates.
Anchor point defines angle of the screen to display the object in similar way as for Graphic3d_TMF_TriedronPers.
Extend Draw Harness command vdisplay with new options:
-overlay as alias for -toposd.
-underlay and -botosd.
-noselect to prevent automatic selection activation.
-dispMode and -highMode to define displaying and highlighting modes.
-2d, -2dtopdown and -3d to manage displaying in screen coordinates.
-trsfPers and -trsfPersPos for Transformation Persistence options.
Drop command vsettransmode, replaced by vdisplay.
Correction of test-case bugs vis bug641
Unstable test cases were reviewed
Modified test cases using checktrend command
Modified test cases for Linux platform
Modified test cases for Debug mode
1) Treatment of case when projection algorithm to BSpline surface return null 2d curve.
2) Changed approximation of next step in default projection algorithm.
3) Special handling of surface of revolution added.
"Period jump" handling evaded in case when curve not computed.
Test cases for issue CR25892
Small correction of test cases fot CR25892
Changes:
class BOPTools_AlgoTools
static function:
Standard_Boolean FindPointInFace(const TopoDS_Face& aF,
const gp_Pnt& aP,
gp_Dir& aDB,
gp_Pnt& aPOut,
Handle(IntTools_Context)& theContext,
GeomAPI_ProjectPointOnSurf& aProjPL,
const Standard_Real aDt,
const Standard_Real aTolE)
Binormal calculation starts from the point located outside the tolerance circle of the edge
Test case for issue CR25432
Correction of test cases for issue CR25432
OSD_OpenFile.hxx header is created for using in file open operations with Unicode names.
Fix for STEP files reading.
Adding test cases for issue 25367
Update test case for issue 25364
Update test cases due to improvements
meshfromstl - display MeshVS_Mesh object in a way consistent with vdisplay command
meshdel - deleted, vremove to be used instead
meshshowall - set empty maps of hidden IDs instead of null handles
meshhidesel - initialize the maps of hidden IDs to avoid exception
meshmat - add optional transparency argument and enable transparency in the viewer if not yet done
meshvectors - command for testing VectorPrsBuilder added
MeshVS: DRAW commands improving
Updating test cases due to previous changes
Small bug in MeshVS_ElementalColorPrsBuilder fixed
vselmode fix
Small correction of test cases for issue CR24961
Warning was fixed.
Remarks were applied.
- class VMap in Draw was removed
- NCollection_DataMap is used to store objects
- name of object is used to associate Tcl variable with the object
- creation and changing of objects are correclty handled
Redundant casts were removed.
Initial value is restored if variable is protected.
Tests for bug #24863 were added.
Some test cases and tcl command "save" were improved.
Useless using of upvar was removed.
Modification:
class IntTools_EdgeEdge
For correct computation of resolution for curves of type Hyperbola and Parabola two new static functions have been implemented:
static
Standard_Real ResolutionCoeff(const BRepAdaptor_Curve& theBAC,
const IntTools_Range& theRange);
static
Standard_Real Resolution(const Handle(Geom_Curve)& theCurve,
const GeomAbs_CurveType theCurveType,
const Standard_Real theResCoeff,
const Standard_Real theR3D);
bugs moddata_2 bug26_2 - improvement.
Test case for issue CR24939
Test case correction for issue CR24939
Range of changing of some analytic curves is computed by other methods. It allows computing face's boundaries with more precise.
Tolerance was increased to provide successful work of some algorithms.
Functions BRepOffsetAPI_MiddlePath::Build() and ApproxWithPCurves(...) (file IntTools_FaceFace.cxx) were changed according to new result of algorithm's work.
It is possibly for "outboundaried faces" (see bug#23675) to compute incorrect UV-Bounds, when first parameter is more than last. To avoid it, extended control of computed bounds was added.
Function for fail sameparameter fixing was added to HLRAppli_ReflectLines to avoid creation bad shapes after algorithm's work.
In file ShapeFix_ComposeShell.cxx only text formatting was changed.
Some test cases are changed according to their new behavior.
Added test case bugs/moddata_3/bug23511
math_GlobOptMin - new global optimization minimization algorithm
Extrema_GlobOptFuncCC, Extrema_ExtCC, Extrema_ExtCC2d - implementation of GlobOptMin algorithm to extrema curve / curve
Extrema_CurveCache - deleted as obsolete code
ChFi3d_Builder.cxx - fixed processing of extrema
math_NewtonMinimum.cxx - fixed step to avoid incorrect behavior
Test cases modification to meet new behavior.
